« September 2005 | Main | November 2005 »
October 28, 2005
Citizens, Legislators and Experts to Convene at Quiet Pavement Meeting
Meeting in Bellevue, WA to showcase rubberized pavement as noise mitigation solution.
Bellevue, WA (PRWEB) October 28, 2005 -- Eastside Citizens For Responsible Development (ECRD) is hosting a community presentation about the use of Rubberized Asphalt (RA) - also known as "Quiet Pavement" - which has been proven to reduce road noise for communities close to freeways in other areas of the country. The presentation will take place at 10:00 a.m. Saturday, October 29, 2005 at Bellevue City Hall.
“The Washington State Department of Transportation (WSDOT) has finally agreed to test RA Quiet Pavement in 2006, but will not say when or where,” said Walter Scott, who organized the meeting. “Our concern is that this test could last as long as a decade. This would effectively deny Washington residents the outstanding benefits of this proven technology.”
This test would provide statistics on RA Quiet Pavement's proven noise mitigation capabilities and also on the environmentally sound use of excess/waste rubber tires - which uses 1,000 discarded tires per lane mile.
The use of RA Quiet Pavement is a legislative requirement in Arizona and California and has been in use in these states for 13 years, with stellar results. The Federal Highway Administration does not yet recognize RA Quiet Pavement as a noise mitigation technique and continues to use only noise walls, which are cost prohibitive, and in many cases, such as where bridges or steep slopes are involved, neither practical nor effective.
ECRD believes many local freeways and arterials would greatly benefit from the use of this RA product in both new and overlay projects.
Presenters at this Saturday’s meeting will include materials experts from the Arizona Department of Transpiration and/or California Department of Transportation. Also invited are all members of the community, local elected officials, and WSDOT.
Date: October 29, 2005
Where: Bellevue City Hall, 11511 Main Street
Time: 10:00 a.m.
For information, please visit www.ecrd.net or contact Renay Bennett at (425) 637-8670.
Posted by Industrial-Manufacturing at 01:18 AM | Comments (0)
Silanis Presents at the IATA eFreight Conference Electronic Signatures: The Key to Paperless Freight Processes
Silanis Technology, the industry’s most experienced electronic signature provider with more than two million users and consumers in business and government, announced today that Tommy Petrogiannis will present at the upcoming 2005 International Air Transportation Association e-freight conference in Geneva, Switzerland. The objective of the conference is to promote greater efficiency in air cargo shipment processes by moving to an industry-wide, simpler, electronic paper-free environment. Mr. Petrogiannis’ session will showcase how electronic signature technology eliminates the last hurdle in achieving paperless freight processes.
(PRWEB) October 28, 2005 -- Silanis Technology, the industry’s most experienced electronic signature provider with more than two million users and consumers in business and government, announced today that Tommy Petrogiannis will present at the upcoming 2005 International Air Transportation Association e-freight conference in Geneva, Switzerland. The objective of the conference is to promote greater efficiency in air cargo shipment processes by moving to an industry-wide, simpler, electronic paper-free environment. Mr. Petrogiannis’ session will showcase how electronic signature technology eliminates the last hurdle in achieving paperless freight processes.
According to IATA, 20 years ago it took 6.5 days, on average, to send a shipment internationally. Despite numerous advances in the transportation industry, today it still takes 6.0 days -- 1 day to fly, 5 days to wait for the paper. “This statistic clearly illustrates that paperwork is the major bottleneck. And while automation has the potential to eliminate the unnecessary delays, risk, and expense inherent in traditional paper-based freight processes” says Mr. Petrogiannis. “These benefits can not be realized as long as documents must be printed whenever a signature is required.”
The IATA eFreight initiative has the support of the top industry executives including Ram Menen, Senior Vice President Cargo, Emirates, “The only way we can combat costs is to bring in better efficiencies that will enhance productivity. Electronic transactions will not just save the world from inefficiencies of physical paper pushing and associated red tape, but will also create better transparency and speedy real-time processing spanning the entire supply chain.”
For over a decade, Silanis’ electronic signature solutions have enabled other industries, from financial services to government, to achieve these goals by automating the secure transmission, review and signing of documents. At the same time, they produce reliable and auditable business records required to demonstrate compliance with applicable laws, regulations, standards and organizational policies.
Mr. Petrogainnis’ presentation will introduce attendees to the concepts and issues surrounding electronic signatures including terminology, solution requirements and functionality. Participants will leave this session better equipped to begin defining their eFreight approval automation needs.
About Silanis
Founded in 1992, Silanis Technology Inc. is the largest and most experienced provider of electronic signature solutions. More than 1,100 government and commercial organizations, representing two million users, depend on Silanis’ solutions to accelerate operations, improve service, and reduce costs. The company’s solutions not only eliminate the inefficiencies of paper, they provide reliable and auditable business records needed to demonstrate compliance with applicable laws, standards, regulations and policies.
Posted by Industrial-Manufacturing at 01:17 AM | Comments (0)
A Kitchen Sink Can Be So Much More Introducing: The Sink à la Carte™ Program from Julien®
Julien Inc., acclaimed leader in the fabricating and crafting of stainless steel for nearly 60 years, is pleased to introduce an entirely new concept in sink customization and design - Sink à la Carte™. Exclusively from Julien, the Sink à la Carte program is an easy to use, step by step guide to designing a kitchen sink personalized to one’s own specifications.
Quebec City, Canada (PRWEB) October 28, 2005 -- Julien Inc., acclaimed leader in the fabricating and crafting of stainless steel for nearly 60 years, is pleased to introduce an entirely new concept in sink customization and design - Sink à la Carte™. Exclusively from Julien, the Sink à la Carte program is an easy to use, step by step guide to designing a kitchen sink personalized to one’s own specifications.
With Sink à la Carte, configuring a customized sink is easy. Start with any Julien sink, and then select the options that best fit the needs of your kitchen design, including food prep, cooking, and clean-up requirements. Customizable features include:
Bowl size
Inside corners – Julien Classic or UrbanEdge™
Drain positioning
Built-in tilt-out drawers
Options – Add an integrated drainboard, backsplash or front drawer
In less than a 4 week lead time, Julien will handcraft a sink based on the given design choices. Key elements and special options are skillfully incorporated to create a one-of-a-kind sink that is personally tailored for both efficiency and ergonomics.
The Julien Home Refinements™ offerings include a complete collection of sophisticated handmade residential stainless steel products: farmhouse, undermount and worktop sinks, kitchen islands, the Aquacentre®, complimentary accessories; as well as a custom-work program that offers vent hoods and systems, cabinet doors, drawers, countertops, backsplashes and shelves.
Julien’s manufacturing process has given them a reputation as “Masters of Stainless Steel Fabrication.” Although many other companies claim to make fine stainless steel sinks, most of their sinks are “stamped” and not scored, cut and formed into sculptured bowls – and not many can boast that they only use high-quality, 16-gauge stainless steel that is hand welded and polished. These high-grade materials and attention to detail provide unparalleled distinction in design and functionality; the result is easy-maintenance, long-term value and an uncompromising quality. And as environmentally-friendly as they are durable, all Julien sinks are made from 90% recycled material. Every sink by Julien comes with a lifetime guarantee.
About Julien
For almost sixty years, Julien has been designing and installing kitchens for five-star resorts, universities, casinos, restaurants and sport stadiums around the world. Recognized for its high-quality professional grade commercial kitchen equipment, Julien is an acclaimed leader in stainless steel fabrication.
Julien Home Refinements division is focused on residential products. Their philosophy is centered on five principals: design, functionality, uniqueness, quality and customization. With a 170,000 square foot production facility in Quebec City, Julien Inc. has over 400 employees, including engineers, computer specialists, designers, technicians, welders, and polishers. Julien products are sold in Canada, the United States, the Caribbean, Europe, North Africa and the Middle East. For more information please visit www.julien.ca or call (800) 461-3377.
Posted by Industrial-Manufacturing at 01:16 AM | Comments (0)
Noise Control Solutions for Floors
American Micro Industries, Inc. is proud to announce a line of acoustical products specifically designed to reduce the transmission of airborne and impact noise through floors. The airborne sound of voices, stereos, and loud appliances or the impact noise from footfall can easily transfer through the floor of one room to the living space below. Soundproofing the floor of your home, apartment, or condo can minimize these noisy intrusions and make your living space peaceful and quiet.
(PRWEB) October 28, 2005 -- American Micro Industries, Inc. is proud to announce a line of acoustical products specifically designed to reduce the transmission of airborne and impact noise through floors. The airborne sound of voices, stereos, and loud appliances or the impact noise from footfall can easily transfer through the floor of one room to the living space below. Soundproofing the floor of your home, apartment, or condo can minimize these noisy intrusions and make your living space peaceful and quiet. The products listed below are appropriate for residential, commercial, institutional, and industrial applications.
QUIET BARRIER™ is an ideal solution for reducing airborne noise transmission through floors. This heavy vinyl material, 1/4 inch thick and weighing 2 lbs. per sq. ft. will block a wide range of sounds, especially those in the mid and lower ranges such as voices and heavy bass. When installed as an integral part of a floor system it will effectively lower the transmission of airborne sound between spaces by 80% or more. QUIET BARRIER™ is available in 4ft. x 8 ft. sheets and 20, 30, and 60 ft. rolls for large scale applications.
IMPACT BARRIER™ is a one-step solution for reducing airborne and impact noise transmission through floors. This 1lb. vinyl material, laminated to 1/4 inch acoustical foam, is available in 20 and 30 ft. rolls. When installed under carpet, IMPACT BARRIER™ will significantly reduce the sound of footfall, voices, and routine everyday noise.
Insulayment is an acoustical floor underlay designed to block impact noise of footfall from traveling through a floor to the occupied spaces below. This “Green” product, composed of recycled cotton fibers, is suitable for use over most types of interior sub floors. It smoothes out minor floor imperfections, is an effective crack suppressant, and can be used under ceramic tile as well as glue-down or nail-down hardwood flooring. Insulayment is 1/8 in. thick and comes in rolls 3 ft. wide x 33 1/2 ft. long. (100 sq. ft.).
Quiet Walk is an acoustic flooring underlay constructed of recycled synthetic fibers with a polyethylene film vapor barrier. Designed for use under laminate, engineered, and floating hardwood floors, Quiet Walk dampens ambient sound within the room where it is installed, but also inhibits sound from traveling into the room below. It smoothes out sub-floor imperfections, adds R-Value to chilly floors, cushions, and makes laminate floors sound more like real wood.
TOUGHSPORT FLOOR™, made from recycled rubber, is designed specifically for heavy foot traffic, durability, and easy maintenance. Appropriate for fitness rooms, health centers, food prep areas, and child care centers, the cushioning underfoot reduces overall noise for a calmer, quieter environment. TOUGHSPORT FLOOR™ is easily maintained with broom or vacuum, soap and water. It is available in 16 attractive color chip combinations and easily installed for a seamless look.
For technical support, more information, or to place an order, please call us at 1-800-558-2058 or visit our website at www.soundprooffoam.com.
American Micro Industries, Inc. is a privately held, veteran owned business located in the mid-Atlantic region of the U.S. in south-central Pennsylvania. A leading provider of specialty acoustical products since 1995, American Micro Industries, Inc. is continuously developing leading state-of-the-art acoustical solutions for residential, commercial, and industrial applications. In addition to its Chambersburg headquarters, AMI offers a Quick Ship program from several locations throughout the United States to provide the highest level of logistics. For more information, visit the AMI website at www.americanmicroinc.com.
Posted by Industrial-Manufacturing at 01:15 AM | Comments (0)
October 27, 2005
Pacific Security Capital Provides Commercial Real Estate Advisory Services for North Carolina Planned Community Project
Commercial real estate investment bank, Pacific Security Capital, provides commercial real estate advisory services to an offshore sponsor for North Carolina planned community project.
Beaverton, OR (PRWEB) October 27, 2005 -- http://www.pacificsecuritycapital.com -- Pacific Security Capital (“PSC”), a leading commercial real estate investment bank providing advisory services, investment sales, capital markets and development services, announced today that it has been engaged by an offshore investor to provide commercial real estate advisory services for a planned community.
The 1000 acre North Carolina-based planned community will include single family detached housing, a golf course, and both retail and condo-hotel components.
“While our client is an experienced sponsor in the European Community, they are less familiar with the intricacies of real estate practices in the United States,” said Theddi Wright Chappell, Managing Director, Global Advisory Services, Pacific Security Capital. “By engaging Pacific Security Capital to provide advisory services we have been able to help them protect their investment.”
Pacific Security Capital will advise the investor on how to deal with diverse factors including:
• Complex agency requirements
• Environmental regulations
• Compliance related issues
• Local market considerations
• Political and geographic risk
• Changing capital markets,
• Planning and construction requirements
• Fluctuating costs and market absorption rates
“The financing, developing, constructing and managing of commercial real estate is a fluid, complex and ever-changing process that requires specialized knowledge and skills that are rarely found within most organizations,” said Chappell. “Pacific Security Capital has the experience and expertise to offer advisory services to its clients to minimize their real estate risk and maximize their Return on Investment, Assets, Equity and Operations.”
To learn more about commercial real estate advisory services from Pacific Security Capital or its preferred client program, PacificEliteTM, please visit www.PacificSecurityCapital.com or call 1-800-844-6085.
About Pacific Security Capital
Pacific Security Capital is a leading commercial real estate investment banking firm providing commercial real estate loans, structured finance, investment sales, development services and advisory services. The combination of direct lending, advisory, intermediary, corporate and professional services, syndication, investment sales and development services consistently allow PSC to rank among the leaders in the industry. PSC is headquartered in Beaverton, Oregon with other offices worldwide. More information about the company can be found at www.PacificSecurityCapital.com
Posted by Industrial-Manufacturing at 05:21 AM | Comments (0)
How Much Security is Enough? The First in a New Series of e-Signature Whitepapers from Silanis
Silanis Technology, the industry’s most experienced electronic signature provider, with more than two million consumers and users in business and government, today released a new whitepaper through its online resource center. Entitled “Security in Electronic Documents and Signatures”, the whitepaper addresses one of the greatest sources of confusion for organizations tasked with assessing their electronic signature requirements – identifying the appropriate level of security for the targeted business process.
(PRWEB) October 26, 2005 -- Silanis Technology, the industry’s most experienced electronic signature provider, with more than two million consumers and users in business and government, today released a new whitepaper through its online resource center. Entitled “Security in Electronic Documents and Signatures”, the whitepaper addresses one of the greatest sources of confusion for organizations tasked with assessing their electronic signature requirements – identifying the appropriate level of security for the targeted business process.
“The main reason why organizations move their document signing processes into an electronic environment is to make them more efficient; however, the exact opposite sometimes occurs,” says Michael Laurie, co-founder and vice-president of Silanis Technology. “Some companies end up making the electronic process even more complex and difficult to use because they set a higher standard for security than is normally required with paper.”
The reason for this, according to Laurie, is based on a common misconception that electronic signing increases the risk of fraud and therefore requires more security.
“Organizations have the tendency to focus their electronic signature initiative on implementing technologies that authenticate users, when in reality they already have most, if not all, of the security measures in place to establish the identity of its signers,” says Laurie.
The whitepaper defines the many forms of user authentication that exist today, such as personal information verification (PIV) and credentials, while emphasizing that they are not necessarily methods of electronic signing.
“Signing is the expression of intent to approve, authenticate or agree with the information in a document. It requires a specific action, such as clicking on a button or entering a password,” explains Laurie. “An electronic signature solution must reliably capture and reproduce that intent, while ensuring compliance with applicable laws, regulations, standards and policies.”
The whitepaper also addresses security as it applies to documents, signatures, transactions, information privacy and authoritative copies. The whitepaper can be accessed by visiting Silanis’ electronic signature resource center located at:
http://www.silanis.com/site/resource_center/index.php or http://www.silanis.com/site/corporate/whitepapers.php
About Silanis
Founded in 1992, Silanis Technology Inc. is the largest and most experienced provider of electronic signature solutions. More than 1,100 government and commercial organizations, representing two million users, depend on Silanis’ solutions to accelerate operations, improve service, and reduce costs. The company’s solutions not only eliminate the inefficiencies of paper, they provide reliable and auditable business records needed to demonstrate compliance with applicable laws, standards, regulations and policies.
Posted by Industrial-Manufacturing at 05:20 AM | Comments (0)
Jim Faydenko of Remodeling Remedies Earns Certified Graduate Remodelor™ Designation.
SOUTH LYON, Mich. (PRWEB) October 27, 2005 -- Jim Faydenko, of Remodeling Remedies in South Lyon, MI has earned the designation of Certified Graduate Remodelor™ (CGR) as well as the Certified Aging-in-Place Specialist (CAPS) from the National Association of Home Builders (NAHB) Remodelors™ Council. Jim Faydenko is one of only 2000 professional remodelors nationwide who have attained or are in the process of earning the CGR certification.
CGR recognizes those remodelors who demonstrate exceptional business integrity, technical competence and a solid track record of customer satisfaction. To earn the CGR designation, a remodelor must complete a series of industry-specific education courses, provide letters of recommendation, proof of licensing and insurance and adhere to a strict Code of Ethics. CGR stands for professionalism, experience and a commitment to quality.
Jim Faydenko is currently working towards the designation of Graduate Master Builder (GMB) as part of his resolution to stay abreast of the current trends in professionalism and technical advancements in the home remodeling industry.
Posted by Industrial-Manufacturing at 05:19 AM | Comments (0)
October 26, 2005
Concrete Washout Systems Strikes Partnership with Stormwater Workshops™
Stormwater Workshops, LLC Selects Concrete Washout Systems as a Risk Management and Compliance BMP Partner for the Upcoming 26 City National Stormwater Summit Tour.
Elk Grove, CA (PRWEB via PR Web Direct) October 26, 2005 -- Concrete Washout Systems, Inc., (CWS), provider of Essential Risk Management Solutions™, announced today that Stormwater Workshops™, LLC has selected Concrete Washout Systems to partner with in their National Stormwater Summit workshops and provide critical risk management and compliance training related to concrete washout.
Stormwater Workshops™, LLC, is comprised of leading industry experts who have combined their experience to produce a National Stormwater Summit. This 26-city tour will incorporate the latest innovations in Best Management Practices (BMPs) and Best Available Technologies (BATs) for quality stormwater compliance. The National Stormwater Summit will combine an NPDES stormwater training program; an expert’s roundtable; a site tour and demonstration, including products manufactured by Profile Products LLC; the EPA perspective session; award-winning motivational speaker, Jeff Conley; and a comprehensive reference manual. For more, visit www.stormwatersummit.com .
National Stormwater Summit workshops will be sponsored in part by Concrete Washout Systems, Profile Products, SI Geosolutions, Paradigm Engineering, Great American Total Erosion Control and Pollution Solution along with resource partners; International Erosion Control Association (IECA), Environmental Protection Agency (EPA), National Association of Home Builders (NAHB), and Land Development Today.
“We have created strategic alliances across the industry to create the most comprehensive training summit for builders, developers, engineers and government officials,” said John Hall, founder of Stormwater Workshops™. “Concrete Washout Systems is a best-of-breed company that enhances the value proposition for each of our summit attendees; offering the building industry essential risk management solutions for concrete washout containment," added Mr. Hall.
“Stormwater Workshops™ will provide the building and stormwater industries with an unprecedented coalition of leaders; from service and product providers to regulatory and resource partners, equipping them with essential risk management solutions,” stated Mark Jenkins, President of Concrete Washout Systems, Inc. “Concrete Washout Systems is very excited to be part of this incredible opportunity and we look forward to providing our expertise to those within the building industry in order to improve their overall awareness and risk management,” added Mr. Jenkins.
The patent pending CWS is a portable, self-contained and watertight bin that controls, captures and contains concrete washout material and wastewater. It allows trade personnel to easily washout concrete trucks, pumps and equipment on site and facilitates easy off site recycling of the same concrete materials and wastewater, while protecting the storm drain system from potential illegal discharges.
About Concrete Washout Systems, Inc.
Concrete Washout Systems is a risk management specialist and industry pioneer in concrete washout and wastewater removal, treatment and recycling. The patent-pending Concrete Washout Systems provides a cost effective, environmentally friendly and compliance alternative for homebuilders, contractors, ready mix and pump operators and environmental engineering firms. For more information visit http://www.concretewashout.com
Contact:
Roger Engelsgaard
Concrete Washout Systems, Inc.
1-877-2-WASHOUT
Fax: (916) 689-0592
www.concretewashout.com
Posted by Industrial-Manufacturing at 12:35 AM | Comments (0)
Speedheat® Offering Limited Distributor Opportunities for New RugBuddy™ Product — The Only UL-Listed Portable Heating Mat for Use Under Area Rugs
Speedheat®, a world leader in the radiant floor heating industry, is seeking distributors for RugBuddy™ -- the only UL-listed portable heating mat approved for use under area rugs. RugBuddy is like an electric blanket for your floor and turns regular area rugs into invisible space heaters. This one-of-a-kind product not only improves comfort, but also helps save energy.
Atlanta, GA (PRWEB via PR Web Direct) October 26, 2005 -- Competition in the flooring and rug industries is intense, however having unique products to offer customers can help boost sales and increase profits. One such new product is RugBuddy™ — a one-of-a-kind portable heating mat that turns regular area rugs into invisible space heaters. Like an electric blanket for your floor, RugBuddy is the ideal solution for warming cold spots in any room of a home or office.
“RugBuddy is an easy add on sale in a flooring store or rug gallery,” says Peter Newman, President of Speedheat US. “This product is the only UL-listed portable radiant heating mat for use under area rugs in the world, so it is truly unique in the marketplace. With customers wanting to increase comfort and cut energy costs this winter season, RugBuddy makes great retailing sense.”
A world leader in the radiant floor heating industry, Speedheat® manufactures RugBuddy and is currently looking for a limited number of quality distributors in the US. Interested parties may contact Peter Newman at 1-888-WARM-FLOOR for more information.
“We are offering a truly risk free proposition for select retailers in America,” explains Pieter Jansens, Chairman of Speedheat International, “because we stand behind the product 100% and offer generous 40% margins for resellers. We want to create a positive partnership and give our distributors a unique edge, so we will be limiting opportunities in major markets.”
By gently warming from the ground up and allowing heat to naturally rise, RugBuddy takes advantage of the many benefits of radiant heating. You simply place the heating mat under your area rug and insert the GFCI protected plug into the wall. The incredibly thin electric radiant heating blanket heats up in less than 20 minutes. One 5.5 x 8 foot, 470-watt heating panel can warm a 10 x 10 foot room, helping increase your comfort while lowering your energy bills.
RugBuddy is guaranteed safe no matter what type of floor covering is under your area rug (stone, tile, wood, laminate, vinyl, cork, or carpet). The ultra thin floor heating mat is a mere 1/16” and consists of Generation4™ looped heating coils, sandwiched between two layers of polyester. The full-surround ground screen and GFCI protection provide absolute electrical safety and a fully effective EMR and RF shield. The RugBuddy area rug heaters have undergone rigorous testing and are UL-listed and NEC compliant. The electric under rug heating blankets feature integrated GFCI plugs, can be placed on a timer, are waterproof and are safe to the touch, even at their highest settings.
The ability of RugBuddy portable heating mats to warm from the ground up produces evenly heated rooms that are more comfortable at lower temperatures, allowing users to reduce traditional thermostat settings; thus saving energy and lowering heating costs. Radiant heating also helps allergy sufferers by reducing the levels of dust, pollen, mold, and other environmental pests spread by conventional forced air heating systems making your home a healthier place to live.
RugBuddy plug ’n’ play heaters were specifically designed to solve zone heating problems without the expense or mess of adding additional ductwork, baseboard heating units or dangerous portable space heaters. Since the electric heating panels are hidden under the rug, they are virtually invisible and completely safe unlike traditional space heaters that can tip over and start a fire.
RugBuddy heating panels are available in five energy efficient sizes:
Extra Large: 470-watt, 5.5 x 8 foot
Large: 370-watt, 5 x 7 foot
Medium: 165-watt, 3 x 5 foot
Runner: 165-watt, 2 x 7.5 foot
Small: 65-watt, 3 x 2 foot (perfect for under your desk in your office)
RugBuddy portable, plug-in, under rug heaters can be ordered online at www.speedheat.us.
For more information about distributor opportunities, please contact Peter Newman at 1-888-WARM-FLOOR or visit www.speedheat.us
Speedheat also offers other energy saving electric radiant heating products for use under virtually any flooring including carpet, tile, stone, floating hardwood, laminate, vinyl and more.
For more information, please call Speedheat at 1-888-WARM FLOOR or visit www.speedheat.us.
About the company:
As the inventors of electric radiant floor heating, Speedheat has produced quality heating solutions since 1985. While electric radiant floor heating is a relatively new concept in the United States, Speedheat is currently heating more than 30,000,000 square feet each year throughout the world. All of the company’s products are designed, engineered, and manufactured in accordance with the National Electric Code and are UL-listed for safety assurance. Speedheat has offices in Australia, Belgium, France, Germany, Italy, Netherlands, South Africa, Spain, and the United Kingdom. Their United States headquarters are based in metro Atlanta (Woodstock), Georgia.
Although Speedheat is relatively new to the United States, they have already started to attract media attention. This Old House Magazine featured Speedheat in their “20 of the Year’s Coolest Tools, Gizmos and Gadgets” list for 2004. Speedheat has also received coverage in the Atlanta Home Improvement Magazine, was profiled on HGTV’s International Builder's Show 2004 program, and has already appeared once on the Ask Andrea™ nationally syndicated home improvement radio show and has been asked to reappear again this fall.
Contact:
Ingrid Weir
Speedheat US
1-888-WARM FLOOR
www.speedheat.us
Posted by Industrial-Manufacturing at 12:34 AM | Comments (0)
Thierry Francois' Custom Scagliola Stone Show House with Stone Age Designs
Stone Age Designs announces that no other home in the U.S. has more Scagliola custom stone than the home of Designer Thierry Francois. Exterior and Interior scagliola stone accents as a wonderful option to substitute cast stone accent, custom stone pedestals, Scagliola stone fireplace mantels and custom stone kitchen hoods make this French home unique.
Atlanta, GA (PRWEB) October 26, 2005 -- Stone Age Designs announces that no other home in the U.S. has more Scagliola custom stone than the home of Designer Thierry Francois. Exterior and Interior scagliola stone accents as a wonderful option to substitute cast stone accent, custom stone pedestals, Scagliola stone fireplace mantels and custom stone kitchen hoods make this French home unique.
Stone Age Designs is the annual host to the Atlanta Symphony Orchestra as they bring music and art, composers and designers together for this annual event surrounded by the antique beauty of Scagliola Stone. Thierry Francois' Scagliola Stone Show House at 225 West Paces Ferry gives a unique sense of European flavor for this event.
Scagliola dates back to the 17th Century when it was first created by Italian Monks near the Italian city of Capri. Creating Scagliola Stone is a technique of blending and inlaying marble powders and pigments producing a marble-like surface that resembles a painting while the designs can range from classic to modern.
The original Scagliola can be found today in the Uffizi Gallery in Florence, and the Riche Chapel, Munich dating back to 1603. Today, the Scagliola of the Renaissance is used in more than palaces; Scagliola is used to enhance the antique beauty of the home with a special focus on Stone Fireplace Mantels, http://www.stoneagedesigns.net/mantels, and Stone Kitchen Hoods, http://www.stoneagedesigns.net/kitchen as well as Scagliola Columns, and Pedestals.
Scagliola Stone created by Stone Age Designs uses a secret recipe of Thierry Francois. New techniques blend more than crushed marble as Francois has added limestone, and travertine to produce custom stone fireplace mantels, stone mantels, as well as custom stone kitchen hoods to substitute cast stone kitchen hoods that are not nearly as costly as hand-carved stone and still special like those.
The Scagliola of Stone Age Designs is easy to use, easy to install, and the design possibilities are limited only to the imagination. Stone Age Designs’ Scagliola has the look and feel of hand-carved quarry stones and the elegance of the Italian Renaissance.
There are two other major design differences in Stone Age Designs’ Scagliola. “Our technique allows us the flexibility to hand-carve our Scagliola for very special projects, and our exclusive technique provides a sense of old-world elegance because it is layered, giving it the look of authentic custom stone.”
“We have so much artistic freedom today,” says Francois because “we can create what we see in the mind’s eye with the molds we create or from the designs of the past. We can also work from CAD drawings to create one-of-a-kind pieces in our own precious Scagliola Stone.”
Francois added, “this is one of the reasons we created the Scagliola Stone Show House with more Scagliola custom stone than any other home in the U.S. so that we would be able to showcase Scagliola designs of today exclusively from Stone Age Designs.”
Visit Stone Age Designs at http://www.stoneagedesigns.net/ and see the beautiful Scagliola Stone Collection of Thierry Francois, and you will find a one of a kind Showcase for Stone Fireplace Mantels and Surrounds, Stone Kitchen Hoods, Stone Stove Hoods, Stone Accents, Arches, Columns, Pedestals, and Statues. Commercial Architects and Residential Architects are moving to Stone Age Designs’ Scagliola for Stone Fountains, Moldings, Spiral Staircases, Walls, and even Waterfalls.
Stone Age Designs Showcase: http://www.stoneagedesigns.net/showcase/
Stone Accents: http://www.stoneagedesigns.net/accents/
Scagliola Stone: http://www.stoneagedesigns.net/scagliola.html
Kitchen Hoods: http://www.stoneagedesigns.net/kitchen/
Fireplace Mantels: http://www.stoneagedesigns.net/mantels/
About Stone Age Designs:
Since 1997, Stone Age Designs own Scagliola Stone Collection by Thierry Francois has been Showcased around the world as the company crafts antique-looking Scagliola Stone Fireplace Mantels, Scagliola Stone Kitchen Hoods, and architectural details. Their secret mixture of crushed marble, limestone, and travertine is becoming the market leader in Scagliola, or “Scaglia” which was originally manufactured by Italian Monks in the 17th Century.
Contact:
Bruno Francois
Stone Age Designs
1020 Huff Road
Atlanta, Georgia
404.350.3333 – Extension 4
F. 404.355.4570
e-mail protected from spam bots
http://www.stoneagedesigns.net/
Posted by Industrial-Manufacturing at 12:33 AM | Comments (0)
Littleton Advertising & Marketing, Clients Win 10 NCHBA STARS Awards
Littleton Advertising & Marketing and its clients have been awarded 10 STARS Awards from the North Carolina Home Builders Association. Littleton Advertising & Marketing is a full-service, award winning advertising agency with offices in Raleigh and New Bern. The company has enjoyed long-term marketing partnerships with many residential developers and builders around the Triangle.
CHARLOTTE, N.C. (PRWEB) October 26, 2005 -- The North Carolina Home Builders Association (NCHBA) awarded Littleton Advertising & Marketing with 10 STARS Awards for elements of marketing campaigns the company has produced with multiple clients.
Littleton won three awards for projects entered with Raleigh homebuilder K. Hovnanian Homes, 4 awards with Wakefield Development Company’s Bedford at Falls River community in North Raleigh, and one each for GS Carolina’s Amberly community in Cary, Carolina Communities Development Group in Raleigh and Charleston Homes in Raleigh.
Bedford’s four awards were for best newsletter, best TV commercial, best sales office and best website. K. Hovnanian Homes’ three awards included best brochure/direct mail, best logo and best billboard, all for its NewHome101 campaign. Charleston Homes won an award for best brochure and Carolina Communities and Amberly won for best logo.
The North Carolina Homebuilders Association (NCHBA) 2005 STARS Awards Gala took place during the 21st Century Building Expo & Conference on Thursday, September 15, 2005 at the Westin Hotel in Charlotte. The awards show recognizes home building, sales and marketing professionals in North Carolina.
“Our clients have provided us the opportunity to feature our versatility in our industry and in the Triangle market,” said Chris Enter, a creative director for Littleton Advertising & Marketing. “Our success can be attributed to individual clients’ diverse campaigns and marketing needs, and our ability to meet, and surpass, the demands of each project we take on.”
Littleton has enjoyed long-term marketing partnerships with many developers and builders incorporated with designing master-planned residential communities all around the Triangle, and has recently expanded its client base to Charlotte, the Triad area, Virginia Beach, VA and South Carolina. For more information about Littleton Advertising & Marketing call 888-514-9116, or visit
About Littleton Advertising & Marketing
Littleton Advertising & Marketing is a full-service, award winning advertising agency that specializes in the marketing of high-end master planned real estate communities and products that require a high degree of emotional appeal to communicate to a select group of discriminating buyers. Littleton has offered award winning advertising and marketing services for over 12 years, and has become a highly regarded advertising agency in the Triangle area and beyond. The company is known for creating breakthrough branding for each product marketed.
Posted by Industrial-Manufacturing at 12:32 AM | Comments (0)
Heating and Ventilation Ductwork Supplier Expands National Coverage in the UK
One of the UK's largest heating and ventilation ductwork manufacturers, Senior Hargreaves is expanding its chain of trade counters operating under the name Ductshop. Their newly opened West London depot will provide local trade contractors with a complete range of ductwork, fans, grilles, dampers and hundreds of other key components.
(PRWEB) October 26, 2005 -- One of the UK's largest heating and ventilation ductwork manufacturers, Senior Hargreaves is expanding its chain of trade counters operating under the name Ductshop. Their newly opened West London depot will provide local trade contractors with a complete range of ductwork, fans, grilles, dampers and hundreds of other key components.
The stock range has been greatly expanded to include accessory from tapes to tools - making a visit also relevant to electricians, plumbers and other trades. Depot manager, Paul Heryet explained, "The new Ductshop will have a spacious reception with tea and coffee facilities will provide customers with a comfortable area to relax in while we take care of their order."
The West London depot is to be followed by a new East London depot early in 2006. At the start of the year, Hargreaves opened their first ever Merseyside Ductshop and this is trading ahead of target. General manager Phil Johnson explained. "We are confident that we are onto a winning formula and are now rolling the modernised trade counter programme out nationally."
Senior Hargreaves achieves economies of scale in manufacture and sourcing products allowing them to offer competitive services to trade customers and flexible account and credit card facilities mean no order is too big or too small. Skilled staff are on hand at all Ductshops to give technical advice.
More information: Phil Johnson, Senior Hargreaves, Tel. +44 (0)161 764 5082 Fax. +44 (0)161 762 2336 Web: www.hargreaves-ductwork.co.uk
High/low resolution images are on the web at www.ainsmag.co.uk/ha166/4077ha1a.htm
Posted by Industrial-Manufacturing at 12:31 AM | Comments (0)
Dr. Kevin and Jackie Freiberg, Authors of GUTS!, This Week on Family Business Doctor
This week, Host Fred Hathaway and Family Business Doctor Wayne Rivers, discuss Key Traits of a Healthy Family Business with guests Dr. Kevin and Jackie Freiberg authors of the new business book sensation GUTS! Companies that Blow The Doors off Business As Ususal. Family Business Doctor will air on the business channel of Voice America Network (Voiceamerica.com) Thursday October 27, 2005 at 2:00pm EST.
FOR IMMEDIATE RELEASE
Raleigh, NC (PRWEB) October 26, 2005 -- This week, Host Fred Hathaway and Family Business Doctor Wayne Rivers, discuss Key Traits of a Healthy Family Business with guests Dr. Kevin and Jackie Freiberg authors of the new business book sensation GUTS! Companies that Blow The Doors off Business As Ususal. Family Business Doctor will air on the business channel of Voice America Network (Voiceamerica.com) Thursday October 27, 2005 at 2:00pm EST. Psychologist Dr. Michael Lyons will also join the show to discuss the psychology of a healthy family business.
The Freibergs will discuss their compelling new book GUTS! and will examine how some unconventional leaders have the courage to buck traditional trends, follow their own path, and still make record-breaking profits. GUTS! is an exciting sequel to the Freibergs’ hugely successful book, NUTS! Southwest Airlines’ Crazy Recipe for Business and Personal Success, which has sold over 500,000 copies.
This episode of Family Business Doctor will share the key traits of a healthy family business and some unhealthy business behaviors to avoid. Access to the Family Business Doctor program is free and can be downloaded from the Voiceamerica.com website after the broadcast. The show runs weekly on Voiceamerica.com Thursdays at 2:00pm EST.
Wayne Rivers is the President of the Family Business Institute and author of You Don’t Have to Die To Win and Prescriptions for a Healthy Family Business. The Family Business Institute specializes in helping family and closely held businesses maximize their success. For more information on Family Business Doctor contact Fred G. Hathaway at 1-877-326-2493 (FAM-BIZ-DR) or visit the company website, www.Familybusinessinstitute.com.
Posted by Industrial-Manufacturing at 12:30 AM | Comments (0)
First Class Space for Science
It’s not every building supplier that can design, deliver and fit out a new building complex in just six weeks. In fact, in the case of the new science block for Akeley Wood Senior School in Buckingham, Portakabin was the only company willing to take on the job.
(PRWEB) October 26, 2005 -- Two weeks before the end of the summer term at the school, an explosion caused by an underground gas leak had devastated the science laboratories. The fire occurred during the night, destroying four laboratories and a preparation room.
The school was able to continue the term’s remaining science lessons in existing accommodation, but needed to find a way to get high-quality, fully operational science labs built and ready for lessons, before students returned in the autumn.
The insurance company quickly confirmed that a complete new science complex had to be built. The architect appointed by the insurance loss adjustor was aware of Portakabin’s excellent reputation in the education sector, and it quickly emerged that Portakabin was the only company able to commit to the tight timescales of the project.
The Portakabin Customer Charter provided the assurance that the company could meet the deadline. This unique Charter promises that Portakabin will deliver buildings on time and on budget. If the company ever fails to do this, it pledges to provide a week’s free hire for every day it is late.
Within two days of the explosion, the school was delighted to receive a full initial costing from Portakabin. Working closely with the school, Portakabin selected a suitable location and designed a science block that would meet the school’s precise requirements.
The new block included four laboratories and a preparation room, as well as two storage areas. The building was accessed by a ramp, and fitted with heating and a climate control system, all provided by Portakabin. The company was able to accommodate the specific requirements of a science teaching area by supplying non-slip flooring, acid-resistant worktops, fire-resistant storage facilities and even a secure cupboard for storing radioactive materials.
A timescale was drawn up by Portakabin for delivering, installing and equipping the buildings before the end of the summer holidays. The buildings were duly delivered on the agreed date and were connected to all services and fitted out with everything from sinks to gas taps in time for the arrival of the students in September.
“I was amazed that Portakabin managed to do so much in such a short timescale,” says Bursar, Clive Martin. “All along I’d had doubts that everything could be completed in time, but I was very impressed by Portakabin’s positive approach to meeting the promised completion date.
“People returning after their holidays were really impressed by the standard of accommodation we had been able to put in place. It was quite a complex project too,” he adds. “Portakabin took care of everything and managed the whole project, which means we now have a very high quality science teaching block to replace the damaged facilities.”
For details on this and other modular building projects contact www.yorkon.co.uk
Posted by Industrial-Manufacturing at 12:27 AM | Comments (0)
Interactive Technology Vastly Improves the Home Buying Experience
New technology allows home buyers to actively partake in the purchase process through online interaction.
(PRWEB) October 26, 2005 -- A new product available for home and condo builders is radically changing how consumers purchase a new residence.
The product, the 24/7 Sales Center, gives customers the ability to shop for their homes online. All aspects of the purchase process are available to the customer, including lot, model and options selection.
The buyer first logs into the builders website where he or she is able to configure everything in their new home. From carpet to trim, virtually everything is available to be visually customized all at the click of a mouse button.
The 24/7 Sales Center also comes equipped with the ability to handle online reports and agreements.
“With the 24/7 Sales Center it’s possible to perform the complete purchase cycle online,” says Frank Guido, President and CEO of Aareas Interactive the makers of the 24/7 Sales Center. “It’s only a matter of time before builders start taking advantage of this technology and making the online purchase a reality.”
The 24/7 Sales Center is already widely used with big name developers, Carl Freeman and Estridge among others, who use the product to give their customers an overall greater home buying experience.
Aareas Interactive has been offering technological solutions to the building industry for over 14 years. They will be displaying the 24/7 Sales Center at the 2006 International Builders Show in Orlando, Florida on Jan. 11-14.
For more information about Aareas or the 24/7 Sales Center contact them at 1-888-613-2677 or visit their website at www.aareas.com.
Posted by Industrial-Manufacturing at 12:26 AM | Comments (0)
Northwest Iowa Architectural Salvage Company Rescues Vintage Woodwork and Old House Parts
A family effort is being made by Northwest Iowans to recover vintage woodwork and old house parts from buildings slated for destruction. Once these treasures are diverted from flames or landfills, they are made available for sale.
PAULLINA, Iowa (PRWEB) October 26, 2005 -- Because the number of family farms has diminished, the number of unoccupied old farm houses has increased. ND MillWerk Salvage and Sales recognized the beauty and durability of vintage woodwork, old hardware and antique architectural components in many of these deteriorating buildings. Says co-owner Nelda Werkmeister, “I hate to see anything go to waste.”
Through their efforts in Paullina, Iowa, in the heart of the Midwestern Plains, new items like beveled glass doors and colonnade cabinets are saved from destruction and sold for restoration projects, additions to vintage homes, and to folks who want the quality and workmanship of the early 1900’s.
Prices of new wood products often stop homeowners from including detailing such as crown molding, picture and chair rail, even a classic staircase or wainscoting. Door and window caps, wide baseboard with decorative corner posts and blocks, as well as hardwood flooring, are just a few of the fine architectural enhancements often found in homes and schools built between 1890 and 1930. Vintage woodwork becomes an affordable alternative to modern construction features.
After obtaining the salvage rights, ND MillWerk Salvage and Sales carefully removes the reusable wood, hardware and other special features. These specials may include built-in hutches, columns, porch posts, and old heat registers. The treasured antiques are then moved to a warehouse in Paullina, Iowa, and sold as is.
Not only are used building materials brought to market, but tons of wood are diverted from landfills to instead extend its presence in architectural history. For more information, check out the company web site at www.oldwoodwork.com.
Posted by Industrial-Manufacturing at 12:25 AM | Comments (0)
October 25, 2005
Motor Shaft Grounding Boosts Reliability Of HVAC/R Systems
The new AEGIS SGR™ Conductive MicroFiber™ Shaft Grounding Brush from Electro Static Technology improves the reliability of HVAC/R systems by dramatically extending motor life.
Mechanic Falls, ME (PRWEB via PR Web Direct) October 25, 2005 -- The new AEGIS SGR™ Conductive MicroFiber™ Shaft Grounding Brush from Electro Static Technology improves the reliability of HVAC/R systems by dramatically extending motor life. By protecting bearings from electrical damage for the life of the motor, the AEGIS SGR prevents bearing noise and costly motor repairs and downtime. It is ideal for OEM motor and fan manufacturers, repair shops, HVAC service contractors, and in-house maintenance departments and can be easily installed as part of a preventive maintenance program. Detailed technical information is available at www.est-aegis.com.
When AC motors, commonly used in HVAC/R systems to drive fans, air pumps, chillwater pumps, compressors, and other air-handling equipment, are employed with variable frequency drives (VFDs), currents are induced on the motor shafts. Without a grounding device, these currents typically discharge through the motor bearings, causing frosting, pitting, fusion craters, and fluting. This damage can lead first to noise that travels throughout a building’s ductwork, then to motor failure, and finally to failure of the entire HVAC/R system. By safely channeling harmful shaft current away from the motor bearings to ground, the SGR prevents electrical bearing damage, and the noise and motor failures it causes.
AEGIS SGR is easily installed by sliding the brush over either end of the motor shaft and locking it in place with simple screw-on mounting brackets. Because no machining is required, the SGR can be installed in minutes — even in the field.
Unlike conventional shaft grounding brushes, which wear out quickly and lose their effectiveness, AEGIS SGR’s conductive microfibers work with virtually no friction or wear and last for the life of the motor, with no RPM limitations. Maintenance-free, the AEGIS SGR is unaffected by dirt, grease, or other contaminants and provides the longest-lasting protection available.
The SGR is available in standard sizes to fit most AC motors ranging from 1 to 1500 HP with a full parts list available to download at www.est-aegis.com/sgr-chart.htm
Electro Static Technology is the global leader in the elimination and/or mitigation of induced electrical charges on rotating and moving surfaces. Electro Static Technology is a division of Illinois Tool Works (ITW), a $10 billion multinational conglomerate operating in 44 countries.
For more information, contact: Adam Willwerth, Sales and Marketing Manager, Electro Static Technology, 31 Winterbrook Road, Mechanic Falls, ME 04256, Toll-Free: 1-866-738-1857, TEL: (207) 998-3493, FAX: (207) 998-5143, www.est-aegis.com.
Posted by Industrial-Manufacturing at 11:25 PM | Comments (0)
WorkOasis™ Announces its Support for the Patriot Act
FM Solutions announced today that its WorkOasis™ facility management technology platform is fully compliant with the new commercial building regulations for Patriot Act certification.
Atlanta, GA (PRWEB via PR Web Direct) October 25, 2005 -- FM Solutions announced today that its WorkOasis™ facility management technology platform is fully compliant with the new commercial building regulations for Patriot Act certification.
The WorkOasis™ national network of certified suppliers which covers approximately 1100 cities in North America is a web-based contractor management service that provides fully electronic work order management. The WorkOasis™ centrally hosted program automates the service contracting process including the certification of suppliers, contractor selection, maintenance planning, work order management, work approval, performance measurement, invoicing, and payment: and is completely paperless and includes a detailed, Sarbanes Oxley compliant, electronic audit trail. Further, each service supplier within the WorkOasis™ national network represents and warrants that they are not in violation of Executive Order No. 13244 or the Patriot Act.
The September 11, 2001 terrorist attack on the United States has served as a catalyst of change for this Nation and demonstrates that the freedoms and strengths we enjoy as an open society also make us vulnerable. In response to this attack, the United States government passed the Patriot Act and the President signed Executive Order 13244. This Act and Executive Order provides Federal and Local governmental agencies with the tools necessary to proactively respond to potential future terrorist activities and attacks.
“Current and future commercial real estate owners and managers who utilize the WorkOasis™ network of certified suppliers experience a superior level of confidence in knowing that each supplier who is a member of the WorkOasis™ national contractor network represents and warrants that they are not in violation of Executive Order 132444 or the Patriot Act,” states Bob Dickhaus, President and CEO of FM Solutions. “The professional certification of contractors is becoming more important to corporate real estate organizations to manage the risks associated with maintaining commercial buildings.”
WorkOasis™ is a web-based contractor management application owned and operated by FM Solutions, LLC of Atlanta, GA. For more information, contact Bob Dickhaus (770) 618-0860 or visit www.workoasis.com.
Posted by Industrial-Manufacturing at 11:24 PM | Comments (0)
First Time Home Buyers Find Dream Modular Homes Through New Web Site
PremiumLiving Incorporated informs first time home buyers about modular homes through its new Web site, PremiumLiving.net.
Denver, CO (PRWEB via PR Web Direct) October 25, 2005 -- First time home owners and others looking for the perfect modular homes can now turn to PremiumLiving.net for relevant information and excellent customer service.
PremiumLiving Incorporated, a family-owned business that specializes in building modular homes, recently created its innovative site to provide customers with up-to-date information and to help them find high-quality, custom-designed factory-built homes at affordable prices.
"For many years, PremiumLiving has been ranked No. 1 for customer service and satisfaction by our customers," says Lance McHugh of PremiumLiving. "The new Web site gives them just one more reason to choose us to build their dream homes."
The Web site (www.premiumliving.net) offers visitors a variety of options to help them in their pursuit for finding custom-made modular homes. Even first time home buyers will find solace in the wealth of floor plans and construction series available to them. PremiumLiving.net also supplies users with easy-to-navigate resources that explain the advantages of purchasing modular homes instead of contracting builders to manufacture one on site.
One of the greatest advantages to purchasing a home through PremiumLiving is the high standards its residences must meet before a family can move in. Each home is built to either meet or exceed the minimum standards of the Uniform Building Code issued by the state of Colorado. Each location is built in a climate-controlled environment, which leads to improved living conditions by the time the project is complete.
Because of this, and many other reasons such as time, value and money, PremiumLiving has helped thousands of families create designs that meet each of their individual needs.
Potential home owners can contact PremiumLiving representatives by calling (303) 433-1782 or by requesting information at http://www.premiumliving.net/
About PremiumLiving Incorporated
The family-owned business has been serving its community for more than 34 years. PremiumLiving strives to represent the finest built homes in the region but to uphold that quality with superior customer service. The company ships modular homes to Nebraska, Wyoming, Montana, Kansas, Utah and Colorado, and its employees work with a customer base of both first time home buyers and people who have owned numerous houses. Value, quality, and customer service are just a few of the great reasons to buy from Premium Living Inc. The time to build is now, and the company to trust is Premium Living, Inc. For more information, please visit http://www.premiumliving.net/
Media Contact:
Lance McHugh
303-433-1782
info @ premiumliving.net
Posted by Industrial-Manufacturing at 11:21 PM | Comments (0)
Woodworking is on the Rise with Women -- According to a Rockler Woodworking and Hardware Trend Update
A recent study by the Home Improvement Institute revealed that woodworking is becoming more popular with women. In fact, more women would rather work on their home than shop; and when it comes to home improvement projects, an increasing number of women are working with wood.
Minneapolis, MN (PRWEB via PR Web Direct) October 25, 2005 -- http://www.Rockler.com -- Rockler Woodworking and Hardware, one of the nation’s premier suppliers of specialty hardware, tools and other high-quality woodworking products, shares the findings of a recent marketing research study, revealing that more women would rather engage in a woodworking or home improvement project than ever before.
Put away the credit card and pick up the circular saw. That’s right. A recent study by the Home Improvement Research Institute suggests that more women would rather do a home improvement project than go shopping. And when it comes to home improvement, a growing number of women are tackling woodworking by building custom cabinets, book shelves and tables. Recent marketing research by Rockler Woodworking and Hardware reveals that one of the fastest growing trends in home improvement is women working with wood.
“There are close to four million American women woodworkers today,” said LiLi Rockler Jackson, Rockler Companies spokesperson, a talented young woodworker who is also the granddaughter of the company’s founder, Norton Rockler. “It’s a trend that is quickly rising as more and more single women become homeowners. Our own research shows that the majority of women who started woodworking in the past three years say they want to create something with their own hands for their own home. Women are drawn to working with wood because it’s a creative outlet that provides a gratifying sense of accomplishment.”
“I’m making something original I can’t buy anywhere else,” explained one respondent. “I woodwork to create items designed to fit my needs and personal style,” said another woman. “I challenge myself by creating a functional design and then being smart enough and skilled enough to build it,” said yet another woman.
According to well known do-it-yourselfer and cable television host JoAnne Liebeler, the sense of accomplishment experienced by women woodworkers is much of what’s fueling this phenomenon. “Women are realizing they can use power tools and build something amazing,” she said. “They see me handling a circular saw, and they think, ‘hey, if she can do it, I can do it, too.’ The fear factor has been replaced with a sense of empowerment.”
Rockler Companies’ marketing research suggests that, nearly one third undertake the pastime to create furniture. And while most women woodworkers create a wide variety of items, of those interviewed:
21 percent create craft items such as picture frames;
19 percent build storage items such as custom cabinets or shelving;
17 percent complete home improvement projects such as adding custom crown molding to a room; and
9 percent make children’s items such as dollhouses and wooden toys.
While a growing number of women are just starting out as woodworkers, Rockler Companies’ research suggests woodworking is a lifestyle, not just a hobby. In fact, more than 33 percent of those interviewed have been woodworking for more than five years. Research participants also indicated that, while nearly 24 percent of women who participated in the research said they first started woodworking as a way to improve their homes, yet found that they greatly enjoyed working with wood and power tools.
38 percent do woodworking at least once a week;
58 percent do woodworking at home in rooms or shops dedicated to woodworking; and
71 percent own their own tools, and the majority—42 percent—have spent more than $1,000 to date.
“Woodworking is an especially fun hobby because it results in a functional item,” said Rockler Jackson. “And we’re creating a legacy by building something that can be handed down through the generations.”
Rockler Companies first noticed a growing trend of women participating in woodworking nearly four years ago when it launched womeninwoodworking.com. Since then, female visitors to the web site have jumped 27 percent. “Our retail sales also showed the growth of the female market. Women were coming to our stores asking for advice on how to build cabinets or tables,” said Ann Rockler Jackson, the company’s CEO. “We realized that women woodworkers approach the craft differently than men. Women sometimes hesitate to ask how or why in a mixed group or in a workshop, but jump right in asking questions when talking with other women woodworkers. For many they want to test the waters first before jumping in with both feet. We launched womeninwoodworking.com in direct response to what women woodworkers wanted. It’s fascinating to see its growth.”
The increase in women woodworkers visiting Rockler’s stores and website corresponds to a national phenomenon. According to the National Association of Realtors, single women are the fastest growing group of home buyers and make up the second largest group of homebuyers after couples. According to the Association, the number of single female homeowners has doubled in the past 15 years.
“Combine that statistic with the fact that sales of home improvement products continue to rise in record numbers and this is a significant trend,” said the younger Rockler Jackson. “We believe this trend has been pushed by the popularity of do-it-yourself programs. Women are seeing other women using power tools to make attractive and functional new home furnishings. Suddenly, the intimidation factor that held many women back disappears. In fact, nearly 47 percent of those interviewed stated that they most often work with portable power tools, like sanders, routers, drill drivers, and jig saws. Thanks to do-it-yourself programs, ‘no way’ has been replaced with a ‘can do’ attitude that has helped to drive this trend.”
About Rockler Woodworking and Hardware
Rockler Woodworking and Hardware, a 51-year-old family run business, is one of the nation’s premier suppliers of specialty hardware, tools and other high-quality wood working products. Founded in 1954, the company now includes 34 stores in 20 states and extensive catalog and Internet operations. (http://www.rockler.com) Rockler also publishes Woodworker’s Journal, a leading publication dedicated to supporting wood workers of every skill level.
To learn more about Rockler Woodworking and Hardware visit:
Hardware: http://www.rockler.com/CategoryView.cfm?Cat_ID=11
Tools: http://www.rockler.com/CategoryView.cfm?Cat_ID=73
Wood Products: http://www.rockler.com/CategoryView.cfm?Cat_ID=74
Woodworking Plans: http://www.rockler.com/CategoryView.cfm?Cat_ID=75
New Woodworking Tools and Supply: http://www.rockler.com/new_items.cfm
Contact:
Kay Strait
763-478-8347
e-mail protected from spam bots
Posted by Industrial-Manufacturing at 11:20 PM | Comments (0)
MobileDataForce’s® PointSync® Application Wins MobileVillage® Mobile Star Award
MobileDataforce® announces that it has won a Mobile Star Award™ from MobileVillage®.
Meridian, ID (PRWEB via MobilityNewswire) October 25, 2005 -- MobileDataforce®, the leading provider of rapid application development solutions for mobile environments (RADS-ME), today announced that it has won a Mobile Star Award™ from MobileVillage®, the 10-year leader in mobile technology market development and news services.
The Mobile Star Awards honor the best companies, products, deployments, and leaders in mobile and wireless technology. Winners are chosen by Go Mobile® subscribers, MobileVillage’s free online newsletter provided to technology executives, mobile users, buyers, IT managers, developers, and top tech journalists.
MobileDataforce received a “Silver Star” in the engineering category for the company’s PointSync® application. PointSync, a complete software solution for building and deploying advanced applications on mobile devices such as Pocket PC and Win CE.Net assists organizations with or without in-house programmers; allowing them to quickly and easily create customized mobile applications for field data collection, and database queries. Specifically, PointSync enables:
• Field data collection and database queries using mobile handheld computers, providing rapid deployment, data management, ease of use, and data synchronization (bi-directional) with back-end enterprise database systems;
• Wireless bi-directional data synchronization between the host and field users, with full encryption, security, and the capability to complete transfers that were terminated before completion;
• Mobile application and mobile forms development;
• Barcode scanning, look-ups and database queries;
• Field data capture;
• Full validation of items scanned in the field against a mobile database on the handheld, which itself is updated throughout the day from the central data repository;
• An auto-update feature that replaces outdated documents with new or revised work orders, inventory schedules, pricing tables, etc. to workers in the field;
• Synchronization of captured field data to any back-end or core system via ODBC connection, independent of ActiveSync; and,
• Creation of "smart" mobile systems, allowing various user groups different levels of access and control via the mobility tools on their handheld.
“MobileDataforce is pleased to be recognized for our efforts in developing an easy to use, practical application beneficial to both field workers and their office counterparts,” says Kevin Benedict, company CEO. “Our customers have developed a wide range of mobile applications using PointSync and the results have proven to be a positive solution—assisting companies in the “hard hat” industries by vastly improving their ability to collect and process data in the field.”
A list of winners in each of this year’s award categories is posted at http://www.mobilevillage.com/awards.htm.
About MobileDataforce®
MobileDataforce is a global leader in the development of high performance software solutions for use on mobile handheld computers. Privately held, MobileDataforce was founded in 2000 and its software solutions are sold worldwide through direct and Value Added Reseller (VAR) channels. MobileDataforce’s software solutions are primarily targeted for the “hardhat” industries including engineering, utilities, facilities management, heavy construction, and inspection services. For more information, please visit our website at www.mobiledataforce.com.
About MobileVillage®
A pioneer in developing the enterprise mobile technology market since 1993, MobileVillage® / PDA Inc. is a market and solution development company dedicated to advancing mobile and wireless enterprise computing within select vertical and horizontal market segments. The company has fostered countless technical and professional alliances through conferences; news; product promotions and awards; and "Best of Breed" solution identification. Visit MobileVillage online at www.mobilevillage.com.
©2005 MobileDataforce. All rights reserved. PointSync is a registered trademark of MobileDataforce. MobileVillage® and the Mobile Star Awards™ are trademarks or registered trademarks of MobileVillage / PDA Inc.
Company Contact:
Kevin R. Benedict
MobileDataforce Inc.
208-288-2745 ext. 250
kevin.benedict @ mobiledataforce.com
Public Relations Contact:
Kevin Doel
TalonPR, Inc.
785-273-9660
kevin @ talonpr.com
Posted by Industrial-Manufacturing at 11:19 PM | Comments (0)
DispatchThis.com, The First Web-Based Concrete Pumping Software Provider, Enters Canadian Market
Dynamic Concrete Pumping, Inc. with operations in Calgary, Edmonton and Vancouver Signs up for DispatchThis.com, the first web-based resource management software for concrete pumpers.
Sacramento, CA (PRWEB) October 25, 2005 -- NOGU Technologies introduced their flagship product DispatchThis.com to Canada, taking the first step in bringing its revolutionary web-based resource management software for concrete pumpers to international markets. Dynamic Concrete Pumping of Calgary, Alberta is the latest concrete pumping company to bring the advantages of using DispatchThis.com to their organization.
DispatchThis.com’s web-based service provides concrete pumping companies with an easy-to-use and powerful solution to manage order fulfillment, dispatching, contacts, personnel and equipment. Companies across the US have come to enjoy the advantages of moving management of their operations from paper to software; these same innovative and time-saving services are now being enjoyed in Canada.
“Entering Canada is not only great for the Canadian concrete pumping community, but it is also pivotal moment in the growth of DispatchThis,” said Rahul Gupta, CEO and founding partner of NOGU Technologies. “Our success is grounded in understanding how our customers do business. By working closely with Dynamic, we are certain that our product is effective for Canadian businesses as well as American businesses.”
The growth of DispatchThis.com, and this early entry into the Canadian market indicates that DispatchThis.com is quickly establishing itself as the vanguard resource management solution for concrete pumpers.
“We spent quite a bit of time looking at software for our company,” said Joe Delehay, president of Dynamic Concrete Pumping. “With DispatchThis we were able to find a solution which was both powerful and flexible enough to suit our needs. Their team has been responsive to our needs; we look forward to the using this software as it continues to grow.”
DispatchThis is offered to the concrete pumping industry for a low monthly fee starting at $225/month. As an added benefit, all feature additions, version upgrades and customer support are included at no additional cost.
NOGU Technologies, Inc. is a privately held software provider for the construction industry. Their first product, DispatchThis.com (http://www.dispatchthis.com), is a resource management solution for the concrete pumping industry. Their customers currently manage fleets ranging in size from 3 to 81.
Dynamic Concrete Pumping, Inc. is a leader in high performance concrete pumping and placing services with offices in Calgary, Edmonton and Vancouver, CA. (http://www.dynamicconcretepumping.com)
Media Contact:
James Nolan, Partner
(510) 870-2333
www.DispatchThis.com
Posted by Industrial-Manufacturing at 11:18 PM | Comments (0)
North Carolina Home Builders Association Honors Bedford at Falls River with Four STARS Awards
Raleigh new home community Bedford at Falls River received four awards from the NCHBA STARS Awards. The awards show recognizes home building, sales and marketing professionals throughout North Carolina, and celebrates the outstanding achievements of the industry’s builders, Realtors, on-site salespeople, and media and advertising professionals.
Charlotte, NC (PRWEB) October 25, 2005 -- Wake County’s top selling new home community, Bedford at Falls River, has been awarded four NCHBA STARS Awards. Bedford, a Wakefield Development Company community, took home awards for best newsletter, best TV commercial, best sales office and best website.
“We strive to reflect the level of dedication we put into designing Bedford not just in the community itself, but in all the components that represent Bedford at Falls River and Wakefield Development Company,” said Dawn Forrest, director of marketing for Wakefield Development Company.
The website, www.BedfordTradition.com, is continuously updated with the community’s inventory of available homes, and subscribers can be alerted about inventory updates via email. Bedford’s award-winning community newsletter has also been made available via email to those registered on the website.
The North Carolina Homebuilders Association (NCHBA) STARS Awards took place during the 21st Century Building Expo & Conference on Thursday, September 15, 2005 at the Westin Hotel in Charlotte. The awards show recognizes home building, sales and marketing professionals throughout North Carolina, and celebrates the outstanding achievements of the industry’s builders, Realtors, on-site salespeople, and media and advertising professionals. The event showcased the work of the finalists in 36 categories through an educational, idea-rich, multi-image presentation.
About Bedford at Falls River
Bedford at Falls River, a Wakefield Development Company community, revives the traditional neighborhood setting and atmosphere while combining modern conveniences of today’s homes. For more information about the community, please visit www.BedfordTradition.com, call 919-792-0100, or visit the Welcome Center at 4390 Falls River Ave., Raleigh, NC 27614.
About Wakefield Development Company
Wakefield Development Company is the Triangle's largest developer of residential communities, with a portfolio that includes over 14,000 home sites. In addition to the 2004 NCHBA Community of the Year, Bedford at Falls River, the company has six other communities under development across the Raleigh-Wake County market, including Wakefield Plantation, Eagle Ridge, Edgewater, Cornerstone, Delta Ridge and Twin Lakes. Wakefield has also begun development of Mackintosh on the Lake, a new 612-acre community between I-85/I-40 and Lake Mackintosh in Burlington, and will begin development of two new Triangle area communities, Renaissance Park and Twelve Oaks. For more information, call 919-556-4310, visit www.WakefieldCommunities.com.
Posted by Industrial-Manufacturing at 11:17 PM | Comments (0)
Grand Opening of www.paintersnation.com Industrial Coatings and Supplies Online Store
Painters Nation, LLC online store provides paint and related products to retailers, contractors and end customers. We also provide coatings and sundries for distribution and direct sales to the petro-chemical, oilfield, fleet, equipment and tanking industries.
(PRWEB) October 25, 2005 -- Painter's Nation, LLC is announcing the grand opening of it's online store. We are very pleased to be able to offer our products direct to the internet. For our grand opening special we are offering all products at a 10% discount to the public. Most of our products are already priced well below typical brick and mortar retail value, plus we have free shipping on most products with a $7.95 handling charge per order. Not only do we have a great selection of products, we can ship out gallons, 5 gallon buckets, or even 55 gallon drums of paint. We accept online payments as well as purchase orders in order to accomodate the smallest household to the largest corporation.
Painter's Nation, LLC is a manufacturer's representative of industrial coatings and custom designing formulas for the industrial and petrochemical industries. With a full line of coatings which include sealers, direct to metal paints, elastomeric roof coatings, fleet finishes, high heats, waterborne coatings, urethanes, primers, and epoxies, all formulated with exempt solvents to meet the Environmental Protection Agencies V.O.C. requirements. This allows us to meet all industry needs, including all MIL-P spec. paints and Federal Standard 595B colors.
We are a manufacturer's representative of Coastline Industrial Coatings, Inc., SealGuard USA, and National Paint Industries. Our product lines include coatings and paints such as primers, roof coatings, fleet finishes, urethanes, epoxies, high heat coatings, and waterborne coatings. Other products are also available including tools and specialty sealants such as anti-graffiti coatings.
As a manufacturer's representative we share the same goals and philosophies as our manufacturers. Therefore we both service and supply industrial coatings to the oilfield, petro-chemical, equipment and tanking industries. We also service the fleet industry, provide roof coatings, along with waterborne coatings, and a full line of architectural coatings including sealers and stains.
Our online store is available for anyone to browse, or ask specific questions about our products. We welcome interaction between our customers and hope to build long lasting relationships across the United States. Therefore, we have provided information about our products throughout our site. There is a special section for specifications and recommendations that we have compiled from our manufacturers to aid our customers.
Our specifications and recommendations section is a complete do it yourself guide to industrial coatings. We offer how to coat concrete, roofing, steel surfaces for severe and semi-severe chemical exposure. There are also full listings for Offshore and Onshore coating solution systems, including offshore sub-sea coatings. In addition we provide a troublshooting guide, a link to a great glossary of terms, and a chemical resistance guide. The chemical resistance guide is a great tool for users in the industry to check and verify which products and types of products are affected by certain chemicals. The guide gives a scale from "fair" to "excellent" and has categories such as "Abrasion", "Acids", "Alkalis", and "Solvents". Typically these types of questions are asked often in the industry and are never addressed up front. This proactive approach will give our customers the ability to make smarter business decisions prior to purchasing our products.
Specifications and Recommendations information can be found at:
http://www.paintersnation.com/Specifications_and_Recommendations.aspx
Chemical Resistance Guide:
http://www.paintersnation.com/Chemical_Resistance_Guide.aspx
More information about Painter's Nation, LLC:
http://www.paintersnation.com
Complete Guide to Painter's Nation, LLC:
http://www.paintersnation.com/Site_Map.aspx
Posted by Industrial-Manufacturing at 11:16 PM | Comments (0)
Lite-A-Switch™ Elegant Night Light Improves Hotel Guest Safety & Satisfaction While Lowering Energy Costs
Studies demonstrate that there are significant energy savings gained from installing energy efficient night light products such as the Lite-A-Switch elegant night light in hotel guest rooms. Studies also show that 16% of guests bring night lights with them during hotel stays. This demonstrates an opportunity for hotel owners to improve service levels and reduce liability in addition to realizing energy savings.
(PRWEB) October 25, 2005 -- Multiple studies have shown that one of the largest energy savings opportunities for hotel guestrooms is eliminating the unnecessary extended operation of bathroom lights. According to Sunbeam Hospitality and Andis Corporation about 45% of hotel guests leave the bathroom light on as a night light while they sleep. Research by the US Department of Energy has shown that products like the Lite-A-Switch (www.liteaswitch.com) permanent night light can reduce energy consumption by up to 50% providing payback in as little as 6 months (PIER Lighting Research Program Project 4.1).
Additionally independent studies show that guests want night lights located in hotel rooms. A WRA Research study found that 16% of travelers bring their own night light with them during a hotel stay. A few service oriented hotel organizations have already begun installing a LED night light solution in rooms to cater to this need.
The National Safety Council reports that most accidents occur in the bathroom and recommend night lighting for people over 50. Poor lighting is the 6th leading cause for accidents in the home and a major contributor to hotel room accidents. By following these recommendations and installing energy efficient night lights, like the Lite-A-Switch™ LED night light from Memorytime Inc. (www.memorytime.com) hotel owners can promote guest safety and reduce liability.
The Lite-A-Switch is a patent pending wall mounted night light that securely attaches to an outlet or switch. It uses six long-life LED’s to provide enough illumination to easily navigate in an unfamiliar room. The Lite-A-Switch mounts very much like a standard wall plate, making it subtle and easily incorporated into many room designs.
The Lite-A-Switch™ design allows for secure installation to any existing light switch or outlet plate in minutes making it permanent, kid friendly and appreciated by guests. Available in four different LED color choices, blue, green, pink and white, the Lite-A-Switch™ night light is an elegant and stylish way for hotels to reduce energy and injury costs. In addition to hotel rooms, the Lite-A-Switch can be installed in poorly lighted hall or entranceways. The Lite-A-Switch also serves as a reminder to turn off lights when the switch is installed on the outside wall of a room.
About Memorytime Inc.
Lite-A-Switch (PATENT PENDING) Night Light Solutions are a trademark of Memorytime Inc. Memorytime Corporation was established in 1994 and is a product design and manufacturing company located in Portland, Oregon. For more information visit www.liteaswitch.com
Posted by Industrial-Manufacturing at 11:14 PM | Comments (0)
October 24, 2005
New Free Recruitment Service Connects Companies with Hispanic Blue-Collar, Labor and Service Employees
Latinohire.com is a new bilingual free recruitment service dedicated to providing businesses and households with a direct connection to the Hispanic blue-collar, non-professional, and service workforces. Latinohire.com has eliminated traditional supplemental recruitment agency usage by 90 percent for most businesses in Florida and California.
(PRWEB) October 24, 2005 -- Latinohire.com is a new bilingual free recruitment service dedicated to providing businesses and households in Florida and California with a direct connection to the Hispanic blue-collar, non-professional and service workforces.
Companies can post open positions at no cost – with free translation service from English to Spanish. Potential employees can also search and apply to listed jobs for free. Latinohire.com is poised to become the #1 Hispanic employment source in the nation as the service expands. Presently, the service provides companies in several states with free recruitment and a seamless technology solution - giving them a direct link to “non-professional” or labor workers - thus eliminating the need for costly recruitment companies and position are filled quickly.
In approximately 20 seconds, employers can post for free an online job description using an extensive list of templates. The posting is then automatically translated into Spanish. Once the postings are translated, job seekers may search the listings for free by either “State” or “Job Type.”
For job seekers lacking Internet access – Latinohire.com content is duplicated in the widely distributed free newspaper titled “Buena Chamba.” The newspaper is presently distributed in New York – and will follow in Florida and California in 4th quarter 2005. Sample job categories offered on Latino.com: Buena Chamba include auto-related, construction, domestic help, driver/delivery, factory/warehouse, handyman/odd jobs, office, restaurant/catering, retail/shops, and healthcare.
“Small to medium-sized businesses have been offering creative recruitment incentives and bonuses when they should be examining our free service,” said Eli Portnoy, CEO and founder of Latino Hire. “Latinohire.com has eliminated traditional supplemental recruitment agency usage by 90% for most businesses in Florida and California, while saving the job seeker approximately $150.00 to $500.00 by eliminating costly agency fees. It is a classic win-win situation. There is no capital expenditure, no IT cost, no new hardware or software associated with using Latinohire.com. Dealing with staffing agencies – whether for the Hispanic job seeker or the employer – requires numerous phone calls, a lot of stress waiting for call backs, language barriers, and ultimately wasted time and money. Latinohire.com is a far more organized and cost-effective method of hiring staff – it’s a one-stop shop.”
New York City-based Latinohire.com is the flagship product of Emerging Demographics, Inc. The company was founded by visionary entrepreneur Eli Portnoy who was born in Mexico City and came to the U.S. to attend the University of Pennsylvania. For more information visit www.latinohire.com.
Posted by Industrial-Manufacturing at 12:57 AM | Comments (0)
American Youth Soccer Organization Chooses APSCREEN To Provide National Sex Offender Searches
The American Youth Soccer Organization has chosen APSCREEN, the world’s leading full-service Consumer Reporting Agency, to provide searches for national sex offenders to be included into AYSO’s background screening process.
Rancho Santa Margarita, California (PRWEB) October 24, 2005 -- The American Youth Soccer Organization has chosen APSCREEN, the world’s leading full-service Consumer Reporting Agency, to provide searches for national sex offenders to be included into AYSO’s background screening process. The AYSO, an affiliate member of the US Soccer Federation, now joins numerous organizations using this free service including the Girls Scouts of America.
Ellisa Hall, National Administrator for AYSO, “We are grateful for access to APSCREEN’s national sex offender registry. For the last 40 years, the AYSO has provided a safe, fair, fun sport experience for hundreds of thousands of youngsters all across the U.S. We take seriously the charge to protect players, volunteers and family members, and this valuable information provides one more critical layer to our Safe Haven Program.”
There is no registration or fee for the service and anyone who has a computer and access to the Internet and a web browser can use it. Should a person have any reason to suspect that someone in their neighborhood, school district or community might have a sex crime history they can go directly to www.nationalsexoffenderregistry.net and enter the name of the subject and have a good chance of locating information about a sex offender's history. Currently the database covers 34 states and 12 local areas for a total of 46 jurisdictions. Most of the time, the sex crime records contain enough personal information to verify the identity of a suspect, or provide a lead to pursue further research.
Tom Lawson, CFE, CII & Founder of APSCREEN, comments, "We practically invented background checks over 25 years ago when few companies understood the need to screen prospective applicants. Now we want to give this free service back to the community because we feel so strongly about the protection and safety of our children. We mean it to be used in conjunction with other tools including other sites such as the FBI’s national sex offender registry and the Megan’s Law website provided by the California Attorney General’s office.”
APSCREEN (www.Apscreen.com), founded in 1980 is the originator of the modern-day factual employment-screening concept. Other services include tenant screening, employee locates, asset discovery, permissible credit reporting, motor vehicle records, and fraud examination. Tom Lawson is a certified fraud examiner, certified international investigator, expert witness and holds key positions in several national trade associations. Lawson is available for public speaking engagements and white papers can be obtained by calling 1 800 277-2733.
Company Contact: Tom Lawson (800) 277-2733
Public Relations Contact: Cathy Taylor (949) 635-4923
Posted by Industrial-Manufacturing at 12:56 AM | Comments (0)
General Contractor Bob Moore Construction Completes Newest Best Buy Store in Texas
On October 21 Best Buy opened its newest store in Mansfield, Texas, a suburb of Fort Worth Texas. Bob Moore Construction was the general contractor, on behalf of Kossman Development Company. The new store is Best Buy’s first in the Mansfield and the 65th store in the state of Texas.
(PRWEB) October 24, 2005 -- General Contractor Bob Moore Construction has completed construction on the new Best Buy in Mansfield, Texas, a suburb of Fort Worth Texas.
Bob Moore Construction was the general contractor for this new retail building, on behalf of Kossman Development Company in Pittsburgh, Pennsylvania.
The new store is Best Buy’s first in Mansfield and the 65th store in Texas. The 30,000 SF store is also the first in Dallas / Fort Worth, and only one of approximately 20 Best Buy stores worldwide, to feature color coded décor and a Personal Shopping Assistant (PSA) kiosk. PSA is a new service that provides free, highly trained assistants to help the consumer make selections or even to shop on their behalf while the consumer relaxes and waits -- all to make shopping easier, friendlier and more convenient.
"This store features the latest and greatest that Best Buy has to offer," said Brad Shepherd, New Store Opening Manager for Best Buy. "PSA has been tested in various forms over the past couple years but is only being rolled out now, and this store in Mansfield is the first north Texas store to have it. It’s a whole new approach to making shopping for technology as simple as possible. With PSA and the color-coded departments, the store is designed to make shopping for even the most technological things as easy as possible for any consumer. And it looks very, very nice."
"The store looks great," said Brett Jeffreys, General Manager for the new store. "I was very happy that we could use the stone finish. It's one of the best looking stores I've seen."
Shepherd was pleased with his experience with Bob Moore Construction. "Sometimes construction can be a nightmare but this project has been very smooth," he said. "I've been very impressed with our initial walkthrough and with the site superintendents' professionalism."
Curt Hellen, Senior Project Manager for Bob Moore Construction, was very pleased with the store. “The building turned out beautifully and the stone veneer fits in seamlessly with the rest of the stores in the town center,” he said. “It was a pleasure to work with Kossman Development and the city of Mansfield, as well as the people at Best Buy. The whole project went very smoothly and right on schedule.”
The new Best Buy store is the latest addition to Mansfield Town Center West, a major north Texas shopping development that features well-known retail names like Cinemark USA, Washington Mutual Bank and Quiznos. The Cinemark 12 Theater recently earned Bob Moore Construction the Texas Construction 2005 “Best Of” Award for Entertainment Building construction.
About Bob Moore Construction
Named 2005 QUOIN / AGC General Contractor of the Year, Bob Moore Construction has been one of Texas's most respected commercial construction companies since 1946. The company's portfolio includes a wide range of buildings, from warehouses and distribution centers to office buildings and retail stores. Whether it is providing general contractor, design / build or construction management services, Bob Moore Construction's goal remains the same: to deliver quality construction projects on time and in budget. www.GeneralContractor.com is the best source of information about the company, its projects and more. The website is updated regularly with press releases, newsletters, completed project write-ups and construction articles.
Posted by Industrial-Manufacturing at 12:55 AM | Comments (0)
Easaway Employees Learn the 'Fun' Way
Easaway Drain Care Ltd (Sub-Contractor to Leeds City Council) held a Pipe Re-line competition, designed to provide staff with the necessary skills to carry out a localised pipe repair and to re-illiterate the value of Teamwork.
(PRWEB) October 22, 2005 -- Leeds based Easaway, previously known as Eazyjet Drain Care, launched in 2000 and due to a dedicated work force has now become established as, a Drain Cleaning company that provides a 24- hour service across the Yorkshire region, offers extremely competitive rates and focuses strongly on customer service.
The competition took place at Easaway’s site amongst Drainage Engineers, Plumbers, Ground Workers and even Call Centre staff, who teamed up to perform the challenge.
The competition began with a Pipe-reline demonstration, performed by expert Walter Schofield from the Sewer Centre, who explained, “A pipe re-line saves both time and money, as it removes the need to excavate”
Then in true Generation Game style it was Easaway’s turn to have a go. Split into teams (red, green, blue, yellow and pink) participants were marked out of 10 on: Time taken, Teamwork and of course the Best re-line produced.
Winning the competition by two points were the Blue team, who were awarded £150 prize money for producing the best pipe re-line in the fastest time and demonstrating good communication skills throughout the exercise. The runners up prize went to the Pink team (the girls who work in Easaway’s Call Centre) although they were provided with a much smaller pipe to repair they still managed to thoroughly impress their male counterparts.
On the whole Walter added, “All the pipe re-lines produced today were of a satisfactory standard and would be very acceptable as real localised repairs”
For more information contact:
Easaway Drain Care UK Ltd, Four Seasons House, Railway Road, Crossgates, Leeds, Tel: 0113 260 6767, Fax: 0113 260 3939, Visit their website www.easawaydraincare.com
Posted by Industrial-Manufacturing at 12:54 AM | Comments (0)
October 21, 2005
Don’t Turn Up The Volume – Soundproof
Instead of turning up the volume to drown out loud noises – Soundproof. Soundproofing materials block sound and greatly reduce noise.
(PRWEB) October 21, 2005 -- Are the sounds of a thumping stereo, the rat-a-tat-tat of a construction zone, dogs barking or the ever-popular, me-e-e-ow regular sounds in your neighborhood? These noises and many more are irritating and distracting sounds. They invade your life and disturb your sleep, robbing you of your serenity. Instead of turning UP the volume to drown out those noises – Soundproof. Soundproofing materials block sound and greatly reduce noise. Now because of technical advances, soundproofing materials have become reasonably priced so that more people may take advantage of soundproofing benefits. Yes, you can actually soundproof your life.
Through the proper use and installation of soundproofing material, you can block noise out of your home, apartment, office, condo, restaurant, conference or baby’s room. The more sound transmission is blocked, the more effective the soundproofing.
One tried and true attack on noisy neighborhoods is the use of mass loaded vinyl barriers. Mass-loaded vinyl barriers block noise from entering the wall. The barrier is applied to studs or other structural points, and can be used as an underlay or overlay. Soundproofing barriers can be used on walls, ceilings, floors or around windows – wherever you want to block noise. The mass loaded vinyl barriers are made of heavy, thick weighted minerals, specially designed to stop sound. The heavier the barrier, the more sound it stops. Flexible, durable and wear-resistant, mass loaded vinyl barriers can tolerate temperature ranges from -44 to 255°F. These barriers are versatile and easily adaptable to construction and remodeling procedures.
For the most effective and maximum noise blocking, vinyl barriers should be installed as part of a wall composite. Only a few simple tools are required for installation and many homeowners will be able to undertake this project on their own. To determine how much vinyl barrier material is needed for your project, you will need your room dimensions.
Take care of neighborhood noises without alienating your neighbors and involving the authorities – let soundproofing block out the noise and restore your peace and quiet.
For more information on soundproofing barriers, contact a customer response representative at Windfall Sales: 717-369-5988 or go to the website http://www.soundproofing-barriers.com
Posted by Industrial-Manufacturing at 12:35 AM | Comments (0)
October 20, 2005
HomePortfolio Signs Nameek’s Total Bath Solutions
HomePortfolio announced today it reached agreement with Nameek’s for a substantial advertising placement.
Newton, MA (PRWEB via PR Web Direct) October 20, 2005 -- HomePortfolio, a searchable portfolio of the best in home design, announced today it reached agreement with Nameek’s, a North American importer and distributor of fine European bath fixtures, for a substantial advertising placement.
Consumers and design professionals find Nameek’s bath fixtures on the HomePortfolio website. Nameek’s features four lines of bath fixtures, Windisch, HighTech, Scarabeo and the newly introduced Bath Loft. Nameek’s profile and product listings in the kitchen and bath category can be found at www.homeportfolio.com.
“We are delighted to showcase Nameek’s portfolio of premium bath products,” said HomePortfolio Founder and CEO, Rolly Rouse. “Three million consumers and designers use HomePortfolio to plan their new homes, additions and renovations, and many will appreciate Nameek’s unique European design flair.”
HomePortfolio’s system allows consumers and designers to quickly narrow their search of available bath fixture choices by selecting from a number of design qualities, such as style, color and fixture type. When a consumer or designer chooses the products most appealing to them, they are able to locate local retailers who carry the items.
“HomePortfolio is the best advertising decision we’ve made,” stated Namik Shuhaibar, president of Nameek’s. “We are doing so well that we’ve substantially increased our advertising commitment with HomePortfolio.”
About HomePortfolio
HomePortfolio (www.homeportfolio.com) is a searchable portfolio of the best in home design with 700,000 products, 100,000 retailers and 1,700 manufacturer brands listed in categories such as furniture, kitchen and bath, lighting and appliances.
With clients including Viking, Grohe, Cassina, 2nd Ave Design, Illuminating Experiences and Nameek’s, HomePortfolio offers more premium home design choices than any other source. HomePortfolio brings order to options, making it easier for consumers and designers to find the products they desire for their new homes, home renovations and redecorating projects.
About Nameek’s total bath solutions
Nameek's was founded in 1999 with the simple belief that the bath is the defining room of a household. Nameek's is a leading importer and distributor of high-quality bathroom products working in cooperation with top European manufacturers. Nameek's experience in the plumbing industry spans 30 years. Today, Nameek's distributes throughout the United States and Canada.
Nameek’s represents: Windisch, Spain (Royal quality bathroom accessories), HighTech, Germany (Designer products for the bathroom) and Scarabeo, Italy (The newest trends in ceramic basins), and Loft and Bath of Spain (Fascinating Furnishing for the Bath). For more information you can find Nameek’s at www.nameeks.com.
Posted by Industrial-Manufacturing at 11:31 PM | Comments (0)
Commercial Real Estate Investment Bank - Pacific Security Capital - Engaged As Exclusive Program Manager for $1 Billion Las Vegas Mixed Use Project
Pacific Security Capital has been engaged as Program Manager to provide turnkey management services for a $1 Billion commercial real estate project in Las Vegas.
Beaverton, OR (PRWEB) October 20, 2005 -- http://www.pacificsecuritycapital.com – Pacific Security Capital (“PSC”), a leading commercial real estate investment bank providing capital markets, investment sales, advisory and development services, announced today that it has been engaged as the exclusive program manager for a mixed use project in Las Vegas with construction costs estimated to be in excess of $1 Billion dollars.
Pacific Security Capital will provide turnkey program management services for the project which is expected to consist of retail, gaming and condominium components.
“Pacific Security Capital is seeing the demand for its third party development services sky-rocket,” said Mike Myatt, Executive Managing Director. “The size and sophistication of many of the projects we are engaged in require a unique combination of skill sets that very few service providers can offer.”
Pacific Security Capital will provide the following turnkey program management services for the Las Vegas project:
• Entitlement Consulting
• Fee Development
• Project Management
• Construction Management
• Capital Markets Services
“When a client is going to take the risk of making such a substantial investment into a commercial real estate project, Pacific Security Capital manages the risks associated with large scale development projects,” said Myatt.
To learn more about capital markets, development services, investment sales, or other advisory services from Pacific Security Capital or its preferred client program, PacificEliteTM please visit www.PacificSecurityCapital.com or call 1-800-844-6085.
About Pacific Security Capital
Pacific Security Capital is a leading commercial real estate investment banking firm providing commercial real estate loans, structured finance, investment sales, development services and advisory services. The combination of direct lending, advisory, intermediary, corporate and professional services, syndication, investment sales and development services consistently allow PSC to rank among the leaders in the industry. PSC is headquartered in Beaverton, Oregon with other offices worldwide. More information about the company can be found at www.PacificSecurityCapital.com.
Posted by Industrial-Manufacturing at 11:30 PM | Comments (0)
Habitat for Humanity Founder Millard Fuller and Co-Founder Linda Fuller Honored in New National Monument in Washington, D.C.
Former President Bush Dedicated the “Extra Mile Points of Light Volunteer Pathway” To Highlight Role of Service Movement in American Life.
AMERICUS, GA (PRWEB) October 20, 2005 -- A new national monument was unveiled in Washington, DC on Friday, with Millard and Linda Fuller among the Americans whose life work it immortalizes in bronze and granite. The new “Extra Mile Points of Light Volunteer Pathway” tells the stories of great Americans who, through their caring and personal sacrifice, built their dreams into great movements that have created enduring change in America.
Millard and Linda Fuller were two of only 20 honorees whose commemorative medallions were unveiled in Washington on Friday, October 14th. In a ceremony led by Former President George Bush, political commentator Cokie Roberts, and District of Columbia Mayor Anthony Williams, the Fullers were recognized for the role they played in founding Habitat for Humanity.
The Extra Mile is an initiative of the Points of Light Foundation. The monument required both Congressional and District of Columbia approvals and is made possible thanks to major support provided by the KPMG Foundation.
“Linda and I are profoundly honored to be receiving this award and becoming a part of this national monument dedicated to volunteerism,” said Millard Fuller, who founded The Fuller Center for Housing in May, 2005 (along with his wife, Linda, the Center’s co-founder) following their departures from Habitat for Humanity. “Our nation recently has seen tragedies the likes of which we’ve not experienced before; it will be volunteers working together through organizations like Habitat for Humanity and The Fuller Center for Housing that will be rebuilding whole cities and towns, and bringing life back to areas where the hurricanes brought devastation.”
The monument takes the form of a series of bronze markers laid into the sidewalks in an area adjacent to the White House. The markers are circular, three and a half feet in diameter, and laid into a surrounding six-foot square apron of granite. Each marker will bear the likeness of an honoree, a description of his or her achievement and a quote. Together, the markers form a one-mile walking path through an area surrounded by Pennsylvania Avenue, 15th Street, G Street, and 11th Street, NW.
Because the monument utilizes well-trafficked sidewalks near the White House, it will attract substantial immediate attention. Based on current pedestrian traffic alone, the Extra Mile will have more than 1.7 million visitors per year.
“We are thrilled to see this monument become a reality and to recognize the contributions of such heroic Americans as the Fullers,” said Robert Goodwin, President and CEO of the Points of Light Foundation. “Their legacy epitomizes the spirit of service in America and provides an inspiring example of how we all have the ability to go the extra mile for our fellow citizens.”
Other Extra Mile honorees include Martin Luther King, Jr., Eunice Kennedy Shriver, Clara Barton, Cesar Chavez and Frederick Douglass – as well as founders of organizations such as Goodwill Industries, Volunteers of America and Rotary International. For more information on the monument, visit www.ExtraMile.us. For more background on the Points of Light Foundation, visit www.PointsofLight.org.
The Fuller Center for Housing serves as a companion to low-income housing providers and Habitat for Humanity affiliates by providing funds and other support to advance their work toward ending homelessness and substandard housing around the world.
MEDIA NOTE: To interview the Fullers, contact Debbie Payton at (404) 245-8500.
Posted by Industrial-Manufacturing at 11:28 PM | Comments (0)
Revolutionary New Heads Up Displays Enter the Work Place
Heads Up Pioneers Release New Products For Commercial and Industrial Applications. SportVuePRO™ displays mount on hardhats or baseball caps and give the user a constant real-time view of information - everything from GPS guidance systems to text and instant messaging.
(PRWEB) October 20, 2005 -- The creators of the world’s first consumer Heads Up displays are releasing a new product which could change the face of the modern workplace. SportVuePRO™ Heads Up displays are now available for commercial and industrial applications.
The patented, wireless SportVuePRO™ display system mounts onto hardhats, soft hats or helmets and gives the user a constant real-time view of critical information. The powerful software allows for both serial and USB interfaces and is programmable for universal applications. The data appears in a personal display in the wearer’s periphery, focused at task length. This breakthrough technology frees the worker from distracting glances down at wrist-mounted or hand-held meters and displays. It transmits critical data in low light and bright light, and is perfect for noisy environments. It is also lightweight, compact, and very affordable.
SportVuePRO™‘s workplace applications are vast and varied, and include guidance systems for construction and agriculture, emergency response and situational awareness systems for law enforcement, military and first responders, measurement systems in testing, monitoring devices in manufacturing and processing and even general communication systems such as instant messaging and pager networks.
Multiple requests for Heads Up displays in various applications have led to the development of a new product, the SportVuePRO™ DK1, a developer’s kit that can be tailored and easily integrated to a specific application. The DK1 is available via a cost-effective license agreement with Motion Research. For more information, go to www.motionresearch.com.
Posted by Industrial-Manufacturing at 11:28 PM | Comments (0)
Randy Cross Says Archadeck of North Atlanta Builds Strong Decks
Archadeck of North Atlanta, and Randy Cross came teamed-up when Cross needed to rebuild a deck. Cross needed a deck that would safely hold their friends. The former two-time All-American at UCLA, and three-time All-Pro Center with three Super Bowl rings with the San Francisco 49ers, is no lightweight and also has some really big friends. Owner Pearson is excited to have Cross endorse his custom decks. Cross selected a wood alternative to reduce maintenance. It was built watertight, creating a covered patio underneath. Archadeck of North Atlanta has been serving Buckhead, North Fulton, Cobb, Cherokee, Forsyth, north Gwinnett and Dunwoody area homeowners since 1989.
(PRWEB) October 20, 2005 -- Guy Pearson, the owner of Archadeck of North Atlanta, and Randy Cross came together on common ground when Cross and his wife Patricia needed to rebuild a deck at their home in Country Club of the South, in Alpharetta. They needed a deck that would safely hold their friends. The former two-time All-American at UCLA, and three-time All-Pro Center with three Super Bowl rings with the San Francisco 49ers, is no lightweight and also has some really big friends.
“We wanted a deck that would last a lifetime and a company that would stand behind their work and their product,” said Cross. “Archadeck was heads and shoulders above the other companies out there on all our criteria. During our 13 years here in Atlanta there have been few projects on our home we could compare with our Archadeck experience. If you want the best deck – built and designed by the best company – and expect the best results and satisfaction, the only company to build your deck is Archadeck.”
Owner Pearson is excited to have Cross endorse his custom decks. Cross selected a wood alternative to reduce maintenance. It was built watertight, creating a covered patio underneath.
Archadeck of North Atlanta has been serving Buckhead, North Fulton, Cobb, Cherokee, Forsyth, north Gwinnett and Dunwoody area homeowners since 1989. It is the only Archadeck franchisee in the United States that operates its own lumberyard. All decks, screened porches and sunrooms are backed by a National Guaranty Program. Archadeck of North Atlanta is a member of the Greater Atlanta Home Builders Association and the Better Business Bureau of Greater Atlanta. Over the years the company has earned many honors and awards including the Gold Professionalism Award presented by the Atlanta Home Builders Association.
Posted by Industrial-Manufacturing at 11:26 PM | Comments (0)
Modular Home Manufactuere Welcomes CFO
Customized Structures of Claremont, NH welcomes David Feller as CFO.
Claremont, NH (PRWEB) October 20, 2005 -- David Feller has joined Customized Structures, Inc. of Claremont, New Hampshire as Chief Financial Officer. This comes as part of major growth that Customized Structures is experiencing within the housing market and the Claremont area.
Feller joins Customized Structures after running his own consulting firm that specialized in manufacturing industries. Projects ranged from acquisition search and analysis and information system selection to financial and administrative reorganization and identification of production efficiency improvements. Prior to his tenure in consulting, Feller was Vice President of Operations and CFO of TAFA Incorporated of Concord, New Hampshire and President/CFO of TAFA Material Technologies of Pearland, Texas.
Joe Landers, President of Customized structures, said, “Dave Feller has quickly integrated into the Customized Structures Inc. team and has proven to be a valuable high level contributor that will help the company to continue its pursuit of excellence.” Customized Structures is an active member of the Home Builders and Remodelers Association of New Hampshire (HBRANH) and the National Association of Home Builders (NAHB).
Feller resides in Contoocook, NH with his wife, Lori. His son Ryan, 22, attends Bentley College in Waltham, MA and daughter Alison, 20, attends Quinnipiac University in Hamden, CT. Feller is actively involved in community organizations and serves on Boards of several non-profit entities.
About Customized Structures:
Established in 1984, Customized Structures, Inc. continues to be a leader in the design and manufacture of factory built customized modular homes for residential, multi-family and commercial use throughout New England. Customized Structures is very active in the Home Builders and Remodelers Association of New Hampshire, the National Association of Home Builders, and the Building Systems Council among others. For more information about Customized Structures, Inc., call 1.800.523.2033 or visit www.CustomizedStructures.com.
Posted by Industrial-Manufacturing at 11:26 PM | Comments (0)
ETA Star Properties Showcases Its Portfolio at DOMEXPO
Moscow’s famed Gostiny Dvor, is the venue for the 13th annual International Real Estate Exhibition DOMEXPO.
(PRWEB) October 20, 2005 -- ETA Star, one of the largest property developer’s in the UAE and the property wing of ETA Ascon, a multi dimensional conglomerate, is debuting at International Property Exhibition, DOMEXPO, being held in Moscow from October 13-16, 2005, in order to consolidate its growing presence in foreign countries.
The participation by the developer of iconic projects such as, 23Marina, Al Manara and Liberty House to name a few will invite Muscovites and guests of the Russian capital to take a close look at what ETA offers in the terms of investment opportunities. ETA Star recently debuted at Exporeal property exhibition held in Munich which proved as a catalyst for further expansion of the booming real estate market in Dubai.
“What will differentiate us from other international developments chasing the same investors, is the sheer quality of our projects, its full-service and valued-added programme. This enables investors to maximise their return on investment”, said Abid Junaid, Executive Director, ETA Ascon Group of companies.
“The appeal of ETA Star properties in Dubai will be international as it is a aspirational address in the Arab world, with a secure, upscale, yet family-oriented living environment and facilities unsurpassed within the Middle East” added Abid.
ETA’s property portfolio that is being showcased during DOMEXPO include prestigious projects such as the 23 Marina, Liberty House, Gold Crest Executive, Goldrest Views 2 and the recently anounced Al Manara which secured phenomenal sales figures during the recently concluded property exhibition Cityscape held in Dubai.
DOMEXPO exhibition is the largest international real estate exhibition in Russia, aimed to contribute to the development of real estate market and capital construction in Russia and other foreign countries, thus playing the remarkable role in attracting investments in this socially important sector of economy.
The exposition demonstrates the full spectrum of real estate offers on residential housing in Moscow and foreign countries. It also promotes services offered by real estate developers, evaluation companies, designer and renovation firms, ensures exchange of experience in executing investment and innovation projects, provides attracting and selecting of investors.
To learn more about the projects underway, please log on to www.etastar.com
Editor’s Note:
ETA Star Property Developers LLC is the property development arm of the ETA-Ascon Group. The company’s prime objective is to harness the growing commercial opportunity in Dubai's freehold market.
Developments over 4 million square feet of built-up area are already underway and many more are planned over the coming months. ETA Star’s portfolio currently includes prestigious commercial and residential properties such as 23 Marina, Liberty House, GoldCrest Executive, Goldrest Views 2, The Belvedere and the Palladium. In addition, ETA Star is developing commercial and hospitality projects at the DIC/DMC complex, Palm Jumeirah Crescent, Port Saeed, Salahuddin Road and other prime locations in the U.A.E.
Posted by Industrial-Manufacturing at 11:24 PM | Comments (0)
October 19, 2005
Log Cabin Kits: Extending Property for Less
A home gym or play room for the children may sound like a great idea, or a study or home office may be needed, but finding spare room in the house can be a tough job. Before rushing off to the estate agents or calling the builders it is worth taking a look at all the options available, and weighing up the possibilities of how to gain extra space or room in a home. You may not have considered an outdoor room before, but find out why buying a Log Cabin makes sense.
(PRWEB) October 19, 2005 -- With house prices continually rising, moving house may not be a viable option as it is far too expensive. Moving house can be a stressful time trying to organise everything and sort out all the chaos and upheaval. It is difficult to find the right house, at an affordable price, and can take a long time to complete a sale and actually move and settle in. One may well question, is moving house really worth all that hassle just to gain an extra room?
Building an extension to add that extra space is one alternative to moving house. Extensions take time and planning, and can be quite costly. There is also the upheaval and mess to consider as the house starts to feel less like a home and more like a building site.
The quickest, easiest and cheapest way to extend a property and add extra space is with a Log Cabin. A Log Cabin is both attractive and practical and is ideal for a wide variety of uses. Extra room is gained almost instantly without any of the hassles of moving or upheaval and mess. Log Cabin Kits from Dunster House are easy to assemble with pre-prepared components, clear instructions and everything needed for construction is supplied. Within a day, property can be extended for a lot cheaper than moving house or building an extension.
Dunster House offer a wide range of Log Cabins in varying sizes and designs to suit different requirements and budgets, now including Log Cabin Extensions and an internal Utility Room to give greater flexibility of use and even more space. Visit www.dhleisureandgarden.com for more information on the extensive range of garden products available from Dunster House.
Dunster House
Caxton Road
Bedford
Bedfordshire
England
MK41 0EB
Tel: 01234 272445
Fax: 01234 272588
Posted by Industrial-Manufacturing at 01:06 AM | Comments (0)
Baysaver Technologies, Inc. Joins StormwaterAuthority.org
Baysaver Technologies, Inc. a leading manufacturer of the Baysaver Stormwater Separation System, recently joined StormwaterAuthority as a Thunder Affiliate.
WILMOT, New Hampshire (PRWEB) October 19, 2005 -- StormwaterAuthority, LLC, a multi-partnered website designed to assist both the private and public sectors in making informed decisions about http://www.stormwaterauthority.org[stormwater treatment and management, announced Baysaver Technologies, Inc. as a Thunder Affiliate of the company. StormwaterAuthority.org is a comprehensive resource of information, news, events and research designed to help professionals make informed decisions on stormwater.
“BaySaver Technologies, Inc. is committed to http://www.stormwaterauthority.org[cleaning stormwater and we carry this through to our products, services and research. StormwaterAuthority is a platform not only for our advocacy, it also supports our values in education, research, and information sharing,†said Ken Barksdale, CEO of BaySaver Technologies, Inc. “We look forward to working with StormwaterAuthority to disseminate information on new technology advances in stormwater technology, and assisting decision makers with the water quality issues they face.â€
BaySaver Technologies, Inc. was founded in 1997, as a manufacturer of the BaySaver Stormwater Separation System. The system operates using gravity flow and density differences to remove free oils, suspended sediments, and floatables (trash and other floating debris) from stormwater runoff. BaySaver Technologies, Inc. offers products ranging from oil/water separation systems to filtration units.
“BaySaver Technologies, Inc. works to provide products and services that help treat stormwater runoff. Their commitment to StormwaterAuthority as a resource enables us to continue to share research and knowledge with decision makers and help them make informed decisions about stormwater,†said Lisa Begin, General Manager, StormwaterAuthority. “We welcome BaySaver Technologies, Inc. and look forward to a great relationship with them.â€
For more information about Baysaver Technologies, Inc. and StormwaterAuthority visit www.stormwaterauthority.org
About StormwaterAuthority, LLC
StormwaterAuthority, LLC is a company committed to clean water through the support and sharing of knowledge through its website. The company offers a place where specifying engineers, contractors, developers, site owners and regulators can learn and share information, research best management practices and regulations, and find the latest news on stormwater management and treatment. StormwaterAuthority works to create a community to assist professionals in implementing the best plan, reducing short and long-term costs, and making informed business and environmental decisions.
For more information about StormwaterAuthority visit www.stormwaterauthority.org or call 1-800-729-0604.
Posted by Industrial-Manufacturing at 01:05 AM | Comments (0)
QUIKRETE® Concrete Featured on Premiere Project of "Extreme Makeover: Home Edition"
Fast-setting concrete and Acrylic Sealer aided in transformation of Nashville-area home.
Atlanta, Ga. (PRWEB) October 19, 2005 -- The QUIKRETE® Companies supplied professional grade concrete and sealant used in the transformation of a Clarksville, Tenn. home on ABC’s home-makeover reality show “Extreme Makeover: Home Edition.” The renovation of the Nashville home was featured in the premiere episode of 2005, airing on Sunday, September 25. The use of QUIKRETE® continues a tradition with the show’s unification of functionality and craftsmanship in its use of products to accommodate the special needs of families.
Sixty-four 50-pound bags of QUIKRETE® Fast-Setting Concrete Mix were used in the setting of fence posts to frame the backyard area. To ensure the protection of another backyard feature, a beautiful flagstone pathway, the crew also used 25 gallons of QUIKRETE® Acrylic Concrete Sealer.
“The QUIKRETE Companies were proud to donate products to help ‘Extreme Makeover: Home Edition’ continue to build homes for deserving families,” stated Dennis Winchester, QUIKRETE® executive vice president. “Such a job demanded superior materials to which our line of professional-grade products responded wonderfully. By providing QUIKRETE’s recognized tradition of high-quality products and service to our customers, we make any
do-it-yourself or commercial project user-friendly.”
QUIKRETE® Fast-Setting Concrete Mix is composed of fast-setting cements, sand and gravel designed to set hard within approximately 20 to 40 minutes, saving time and energy in the installation of the fence posts. The properties of the concrete mix allowed the show’s crew to condense four months of work into seven days in order to complete the home-conversion. In addition, QUIKRETE® Professional Grade Sealant provided a water resistant clear coating for the stone walkway. The sealer gives the flagstone longevity and results in a polished semi-gloss sheen that will be aesthetically appealing for years. Both products require no maintenance, enabling the Nashville family to enjoy their beautiful new home with reduced upkeep.
About The QUIKRETE® Companies:
Founded in 1940, Atlanta-based The QUIKRETE® Companies manufactures and sells an extensive line of cement and concrete related products to the do-it-yourself and commercial markets. With more than 75 manufacturing facilities in the United States, Canada, Puerto Rico and South America producing over 200 products, QUIKRETE® has unsurpassed product distribution and depth. In addition, the QUIKRETE® Technical Center insures both do-it-yourself and commercial consumers are provided with the most innovative and highest quality products on the market. For additional information on QUIKRETE® or its products, please visit http://www.quikrete.com or call (800) 282-5828.
About Extreme Makeover: Home Edition
Extreme Makeover: Home Edition is produced by Endemol USA, a division of Endemol Holding. David Goldberg is president of Endemol USA. The series executive producer is Tom Forman. It premiered December 3, 2003, on the ABC Television Network. The show’s successful first season garnered an Emmy nomination for Outstanding Reality Program.
The members of the team who work their creative magic on the homes are team leader and carpenter Ty Pennington, Paul DiMeo (carpentry/nuts and bolts), Paige Hemmis (carpentry/creativity), Tracy Hudson (shopping/style), Michael Moloney (interiors/glamour), Constance Ramos (building/planning) and Preston Sharp (exteriors/big ideas).
Posted by Industrial-Manufacturing at 01:04 AM | Comments (0)
Cadopolis.com Is New and Improved
Cadopolis.com launches a new and improved web site dedicated to servicing the AutoCAD user community. Cadopolis.com is the largest independent online provider for AutoCAD related products and services.
(PRWEB) October 19, 2005 -- On September 30, 2005 Cadopolis.com launched a new and improved web site dedicated to servicing the AutoCAD user community. Although the vast content of the site continues to grow, the access to information has been significantly improved through the implementation of category and sub category pull down menu design. This allows the user to navigate the site intuitively and to find what they are looking for quickly. The category menus include software, shareware, links, forums, news and info, with sub categories too numerous to mention. Other noteworthy improvements include the ability to purchase multiple versions of software; rss feeds for forums, AutoCAD blogs and blog reviews and a powerful key word search engine. Above and beyond the functional refinements, Cadopolis.com has vastly altered its look and feel of the site. In the coming months even more features and tools will be introduced on the Cadopolis.com web site.
To experience Cadopolis.com first hand, or for more information visit www.Cadopolis.com.
About Cadopolis.com
Cadopolis.com is the largest independent online provider for AutoCAD related products and services. Featuring over 200 software titles, 350 shareware titles and 1000’s of AutoCAD related links. Cadopolis.com is committed to providing the greatest selection of products and services available anywhere online. Through the Vendors Market Place, Cadopolis.com provides a high profile venue for individuals and companies alike to market and sell their product solutions. For more information visit the Vendors Market Place at www.cadopolis.com/vendorsmarketplace.asp
Posted by Industrial-Manufacturing at 01:03 AM | Comments (0)
Southern Homebuilding Training Seminars, LLC Offers Home Building Classes on FindaSeminar.com
Training seekers can now search and register for home building training classes by Southern Homebuilding Seminars on Findaseminar.com.
(PRWEB) October 19, 2005 -- FindaSeminar.com and Southern Homebuilding Seminars, LLC have reached an agreement. The agreement allows Findaseminar.com to list and accept registrations for Southern Homebuilding Seminars, LLC seminars and training classes.
Southern Homebuilding Seminars, LLC training class teaches home building fundamentals from obtaining financing and selecting the lot to digging the footings and pouring the foundation all the way through putting on the roof. Southern Homebuilding Seminars, LLC help get students prepared to take the State Homebuilder’s Test or learn the appropriate certification requirements for each U.S. State. This course teaches the basic process at the courthouse from zoning to permits to inspection services. If you ever wanted to build your own house, oversee the building of your own house, or become a professional home builder you will want to attend this course! The full course description can be viewed and registration completed at http://www.findaseminar.com/event1.asp?eventID=5179
To search review and register for Southern Homebuilding Seminars, LLC training classes and seminars or to add your training seminars and receive seminar marketing services on a pay for performance basis please visit Findaseminar.com http://www.findaseminar.com
About Southern Homebuilding Seminars, LLC:
Southern Homebuilding Seminars, LLC has been assisting contractors, appraisers, real estate agents, mortgage personnel and individual home builders for over 17 years. Bill Fullington, the founder of the company, has over 30 years experience in home building, renovations, land development, land appraising and as a licensed Real Estate Agent.
Findaseminar.com is the worlds largest training search engine listing over 120,000 training classes and providing pay for performance marketing services to over 250 training providers in the U.S. The company is owned by Allied Internet Solutions Inc. who also own VenueChooser.com and AddPR.com
Contact Info:
Helen Alliy
Director Operations
FindaSeminar.com
800 349 1935
Additional:
Company: Findaseminar.com
Country: United States
Contact: Helen Alliy
Website: http://www.findaseminar.com
Phone: 800-349-1935
Posted by Industrial-Manufacturing at 01:02 AM | Comments (0)
Embracing and Managing Change, This Week on Family Business Doctor with CCA Global Partners Co-Founder Howard Brodsky
This week, Host Fred Hathaway and Family Business Doctor Wayne Rivers, discuss Embracing and Managing Change with guest Howard Brodsky, Co-Founder, Co-Chairman and Co-Chief Executive Officer of CCA Global Partners. Family Business Doctor will air on the business channel of Voice America Network (Voiceamerica.com) Thursday October 20, 2005 at 2:00pm EST.
Raleigh, NC (PRWEB) October 19, 2005 -- This week, Host Fred Hathaway and Family Business Doctor Wayne Rivers, discuss Embracing and Managing Change with guest Howard Brodsky, Co-Founder, Co-Chairman and Co-Chief Executive Officer of CCA Global Partners. Family Business Doctor will air on the business channel of Voice America Network (Voiceamerica.com) Thursday October 20, 2005 at 2:00pm EST. Psychologist Dr. Michael Lyons will also join the show to discuss the psychology of change.
Brodsky’s business acumen will provide incredible insight for listeners. In the past eight years, CCA Global’s retail sales have increased by 544% and its number of stores worldwide has increased by 472%. Since the company was established in 1984, it has never endured an unprofitable quarter, recording 78 consecutive quarters of profitability.
The ability to embrace and manage change is critical in order for a business to survive. This episode of Family Business Doctor will help listeners understand the process of change and learn how to overcome resistance to it. Access to the Family Business Doctor program is free and can be downloaded from the Voiceamerica.com website after the broadcast. The show runs weekly on Voiceamerica.com Thursdays at 2:00pm EST.
Wayne Rivers is the President of the Family Business Institute and author of You Don’t Have to Die To Win and Prescriptions for a Healthy Family Business. The Family Business Institute specializes in helping family and closely held businesses maximize their success. For more information on Family Business Doctor contact Fred G. Hathaway at 1-877-326-2493 (FAM-BIZ-DR) or visit the company website, www.Familybusinessinstitute.com.
Contact:
Fred G. Hathaway
1-877-326-2493 Ext 13 or
(919) 783-1880 Ext 13 or
(919) 270-9491
e-mail protected from spam bots
Posted by Industrial-Manufacturing at 01:01 AM | Comments (0)
Dallas Contracting Co., Inc. Completes Used Equipment Salvage Project
Dallas Contracting Co., Inc., (website: http://www.dallascontracting.com) a specialized contractor providing demolition, onsite concrete aggregate crushing, equipment salvage and scrap metal recycling to various industries, recently completed the salvage of used equipment from a large chocolate and confectionery manufacturing company.
South Plainfield, NJ (PRWEB) October 19, 2005 -- Dallas Contracting Co., Inc., (website: http://www.dallascontracting.com) a specialized contractor providing demolition, onsite concrete aggregate crushing, equipment salvage and scrap metal recycling to various industries, recently completed the salvage of used equipment from a large chocolate and confectionery manufacturing company.
Dallas Contracting Co., Inc. (Dallas Contracting) was contracted to remove various pieces of used equipment. The equipment was predominantly packaging type equipment including wrapping and filler machines, shrink wrap ovens, hot melt glue dispensers and conveyors. Due to the value of the used equipment and scrap, Dallas Contracting was able to perform the removal and salvage services for no cost. The project was completed with no incidents or injuries.
Dallas Contracting Co., Inc. is an expert in demolition and equipment salvage. Additional information on our services can be obtained at our website http://www.dallascontracting.com/
About Dallas Contracting Co., Inc.
Dallas Contracting Co., Inc. has been in business for 26 years, is financially sound (D&B Rating of 3A2), is bondable, and works on a nationwide basis. Dallas Contracting Co., Inc. offers a turnkey approach to demolition, concrete recycling and remediation projects by offering the following services under one roof:
Demolition, Onsite Concrete Aggregate Crushing and Recycling, Environmental Remediation, Rigging, Brownfield Redevelopment, Surplus and Used Equipment Sales, Interior Demolition, Equipment Removals, Dismantlement, Equipment Salvage and Scrap Metal Recycling.
Dallas Contracting Co. Inc. sells used and surplus equipment and inventory at their storefront on EBAY (http://stores.ebay.com/Dallas-Contracting?refid=store).
Contact:
Dallas Contracting Co., Inc.
1260 New Market Avenue
South Plainfield, New Jersey 07080
P: (908) 668-0600
F: (908) 668-0601
Contact: Damon Kozul, PE, CHMM
Email: e-mail protected from spam bots
Website http://www.dallascontracting.com
Posted by Industrial-Manufacturing at 01:00 AM | Comments (0)
FORCE Pest Control of Pennsylvania becomes and Authorized Bora-Care Pretreatmet Company.
FORCE Pest Control is now authorized to perform warranty pretreatments for termites on new contruction. The pretreatment comes with a 12 year limited warranty against the infestation of termites.
CLARKS SUMMIT, Pa. (PRWEB) October 19, 2005 -- FORCE Pest Control is located in Clarks Summit, PA and serves all of northeastern Pennsylvania and the Poconos. They are a full service pest control company licensed by the Pennsylvania Department of Agriculture and insured.
Bora-Care pretreatments are performed during the construction phase of new homes. This procedure is an alternative to soil treatments. The Bora-Care pretreatment is a spray method that targets specific components of a home significantly reducing the amount of chemicals applied. A professionally applied treatment by an Authorized Bora-Care Pretreatment Company comes with a limited 12 year warranty against termites.
For more information please go to hppt://www.forcepest.com or call 877-762-0131.
Posted by Industrial-Manufacturing at 12:58 AM | Comments (0)
October 18, 2005
Commercial Real Estate Investment Bank – Pacific Security Capital - Presents Risks & Benefits of Investing in Emerging Markets
Leading commercial real estate investment bank, Pacific Security Capital (“PSC”), identifies the risks and benefits that commercial real estate investors should consider when investing in emerging markets.
Beaverton, OR, (PRWEB) October 18, 2005 -- http://www.pacificsecuritycapital.com - Pacific Security Capital (“PSC”), a leading commercial real estate investment bank providing commercial loans, structured finance, equity financing, investment sales and advisory services, explains the risks and benefits of investing in emerging markets.
Commercial real estate investors are facing the most competitive commercial real estate market environment in recent history. Improved market efficiencies coupled with today’s surplus of capital flow have created a reduction in the total investment returns that can be achieved on investments in the U.S. commercial real estate industry.
“Instead of disinvesting themselves from commercial real estate allocations, investment managers are now looking around for higher growth markets,” said Mike Myatt, Executive Managing Director, Pacific Security Capital. “Emerging Markets in Eastern Europe, India, Latin America, China, and the rest of Asia present scenarios for higher growth, even on a risk adjusted basis.”
The following factors will allow commercial real estate investors to achieve higher returns by investing in emerging markets as opposed to the U.S. market.
• Rising Economies: Over the past decade, the twin drivers of expanding world trade as well as a more globalized production system have permitted a number of Emerging Markets to experience the highest GDP rates in the world.
• Demographics: For the most part, Emerging Markets represent younger populations, growing numbers of well-educated professionals, an expanding middle class, growing consumer bases, urbanization, and rising incomes
• Commercial Demand: The economic expansion as well as the presence of global companies that bring employment oriented around intellectual capital is creating demand for modern, western style, commercial real estate infrastructure.
• Residential Demand: One of the biggest exports the U.S. has had over the past twenty years has been culture and lifestyle. As the successful Emerging Market economies undergo the demographic shifts described above, demand for western style single family residences as well as modern multifamily is experiencing explosive growth.
• Closed Market Systems Opening Up: Most successful Emerging Markets have been engaged in systematic reform of basic societal values we take for granted in the developed world. These include property rights, legal process, published regulations etc.
“Despite the many benefits of investing in emerging markets, investors should do so with extreme caution,” said Jim Kean, Managing Director & Chief Investment Officer, Pacific Security Capital.
Some of the most common risks of investing in emerging markets include:
• Political risk: The process of modernizing the economies and systems of emerging markets does not represent a steady or predictable process, which has been influenced by political developments.
• Legal and regulatory transparency: It is important to properly understand a country’s system for governing property rights and development if significant investment returns are to be expected.
• Property rights: In the U.S., title companies provide a very systematic, quickly researched method for determining legal descriptions of property as well as what constitutes a claim on the subject property. Things are not nearly as straight-forward in an emerging market.
• Lack of professional commercial real estate skills: emerging markets are fragmented and lack the professional services a developed world investor may take for granted.
• Operational and logistical concerns: maintaining offshore investments in commercial real estate can add to the complexity of operational and logistical efficiencies.
• Liquidity concerns: Lack of central databases as well as public records of transactions means that there is a deficiency of market pricing information to make comparisons as well as drive transactions. Reduced market transparency also means that transactions take longer to close.
• Infrastructure: In the U.S., there is an assumption of basic infrastructure as structured and mandated by an organized governmental authority. In many cases, rules governing infrastructure and who is responsible for it barely exist in these emerging market countries
• Zoning and impairment: Every market has a different approach to what the owners of properties around your property may or may not do. In many of these environments, little or no zoning exists. The risk of someone engaging in development detrimental to the value of your property is very real.
• Capital Controls: When confronting the issue of repatriating capital from a successful commercial real estate investment, there is a real danger of not being able to extract capital and/or profits from the Emerging Market.
• Currency Risks: Let’s say U.S. investor is taking dollars and purchasing an Indian property denominated in rupees. Two years later the property sells and you record a big profit. However, if you did not hedge the currency, you risk recording a loss or at least a reduced profit because of exchange differences.
“While all of these risks (and more) can be present in emerging markets investments, these risk factors can be successfully managed by engaging the appropriate professional advisor,” said Kean. “A successful emerging markets investment strategy will involve selecting a set of advisors who can help a new investor navigate the maze of issues present in each geographic area.”
For more information on investing in emerging markets, visit http://www.pacificsecuritycapital.com or contact Pacific Security Capital at 1-800-844-6085.
About Pacific Security Capital
Pacific Security Capital is a leading commercial real estate investment bank providing commercial real estate loans, structured finance, investment sales and corporate, professional and advisory services. PSC is headquartered in Beaverton, Oregon with other offices worldwide. More information about the company can be found at www.PacificSecurityCapital.com.
Posted by Industrial-Manufacturing at 02:00 AM | Comments (0)
Florida Manufacturer Develops Vinyl Deck Surface That Replicates Natural Wood Appearance
ICA Global LLC, a leading Florida manufacturer of vinyl exterior products, has developed a new deck material that combines the benefits of vinyl with the beauty of natural wood. The new deck surface, ForeverWood™, was developed to enable homeowners to avoid choosing between the look they want and the minimal maintenance they need to accommodate today’s busy lifestyles.
(PRWEB) October 18, 2005 -- ICA Global LLC, a leading Florida manufacturer of vinyl exterior products, has developed a new deck material that combines the benefits of vinyl with the beauty of natural wood. The new deck surface, ForeverWood™, was developed to enable homeowners to avoid choosing between the look they want and the minimal maintenance they need to accommodate today’s busy lifestyles.
“In the past, anyone looking for a low-maintenance alternative to a wooden deck was limited to either white or gray PVC or composite materials,” explained Denis Hamel, president and CEO of ICA Global LLC. “We introduced ForeverWood to provide a better alternative – a PVC surface that replicates the rich, variegated beauty of natural wood.”.
Unlike typical PVC or composite deck boards, ForeverWood is offered in a choice of three natural wood grain colors – redwood, cedar or grey pine – in addition to white.
“The natural wood character, beauty and traditional grain enable homeowners to enjoy the charm of a real pine, redwood or cedar deck without the trouble and expense of yearly maintenance,” said Hamel.
In addition, the natural wood grain surface makes ForeverWood a truly non-slip surface that is ideal for use as dock planking. Since it is impervious to moisture it will never rot. And since it never splinters, even barefoot boaters can walk on it with confidence, Hamel said.
Unlike natural wood, ForeverWood will never warp, split, peel or crack, and never needs painting, staining or sealing. ForeverWood is installed using a unique tongue and groove system with pre-drilled holes, so there are no visible fasteners that can pop up and cause a safety hazard like regular nails or screws on a wooden dock.
“We believe decks and docks should be enjoyable, recreational structures, rather than a source of endless maintenance chores and expense,” said Hamel. “Yet we also believe they should be attractive and aesthetically appealing with natural beauty. ForeverWood makes it possible to enjoy the charm and beauty of real wood in a structure that is truly hassle-free and durable.”
ForeverWood is backed by a fully transferable limited lifetime warranty. The engineered PVC surface resists scratches, mold, mildew and stains, and is guaranteed to keep its natural wood grain characteristics.
ForeverWood decking boards are available in 12-, 16- and 20-foot lengths, which can easily be cut down to specific sizes. Matching trim and moldings are also available. All Forever Wood materials can be cut with a regular finishing saw blade, and no special tools are required for installation.
For the name of the nearest ForeverWood distributor or for more information, call toll-free at 866-922-1922 or visit the company’s Web site at www.forever-wood.com.
Posted by Industrial-Manufacturing at 01:59 AM | Comments (0)
Bluepools Has Now Launched Its New Range Of Insulated Swimming Pools In France That Carry A Lifetime Unqualified Structural Guarantee
The new website gives a full description of the pools that are insulated to keep the water warmer and allow extended use of swimming pools in France in summer. Roman Ends, covers and top quality components are all now included in the standard Bluepools range of pools.
Jonzac, Charante-Maritime, France (PRWEB) October 18, 2005 -- Bluepools has now completed an intensive three year long research project into the best type of swimming pool for its primary market in South West France. The firm intends to extend its installation capacity across France by the end of 2006 now that it has identified the optimimum approach to the provision of very high quality, structurally guaranteed swimming pools that provide the best value for money. The new website is www.bluepools.co.uk.
The firm is managed by a father and son team of qualified civil engineers and is uniquely capable of analysing the soil conditions at each different sites where it has installed swimming pools and other works. Their research has shown that at 8 out of the 10 sites the subsoil consisted of filled ground or alluvial clay. The limestone rock that dominates the geology of SW France only occured at 2 of the sites. The rock is always there - but invariably at a deeper depth than the foundation of the pool.
The proponderance of the fill and clay subsoil has serious implications for the suppliers and installers of kit and liner pools.
They are not suitable in filled ground because of the highly variable weak soil conditions. They are also not suitable for clay soil condition because of the clays tendency to expand when wet and shrink when dry. When a large hole is dug in clay subsoil and a pool is installed, the void around the pool that is normally back filled with gravel by kit installers, will inevitably fill up with water in winter like a buried ditch. The combined swelling clay and water pressure can cause the liner to lift off the pool wall and perhaps even the collapse of the pool walls.
Bluepools now provides a lifetime unqualified structural guarantee on its polystyrene block reinforced concrete pools. There are now a variety of dense polystyrene blocks available in France that are used for the construction of swimming pool walls . The blocks are normally between 1m and 1.5m long, 250 mm wide and 250 mm deep. This allows the construction of pool walls either 1m, 1.25m or 1.5m deep with greater depths provided by a hopper at one end that can provide up to an extra 1m of depth. The blocks are erected on a reinforced concrete footing and then filled with reinforced concrete to provide a very stiff and rigid wall that is very quick and easy to install and is suitable for all ground conditions. But even with these very strong walls Bluepools always installs both sub-pool and wall perimeter drainage in every pool that it builds.
It was a happy co-incidence that the blocks not only provide a very flat and true surface for the liner to lie against but also 100 mm of insulation that makes the pool water warmer and cheaper to heat.
In its pursuit of providing the best value for money in France, Bluepools incorporates the best quality "through the wall" pool fittings, filtration equipment, covers and many other elements that othe pool installers charge for as extras. The optimised filtration equipment provides pool water turnover in 6 to 8 hours and this ensures that the pool water is always healthy.
For more information please go the website at www.bluepools.co.uk
Posted by Industrial-Manufacturing at 01:58 AM | Comments (0)
October 17, 2005
Serious About Safety – HSS and Turner Access Ltd.
Turner Access and HSS have together developed a new product that tackles the problem of working at height, providing a safe, low-level access solution: the AlphaStep (podium).
(PRWEB) October 17, 2005 -- Of the 70 fatalities in the construction industry in the past twelve months, almost half of those were caused by falls from height. In 2003/2004, 67 people died and nearly 4000 suffered a serious injury as a result of a fall from height in the workplace.
As the Health and Safety Executive announce that they are to launch a major campaign next year to target falls from height, and as there has been a greater focus in general on working at height, in part due to the new Work at Height regulations, Turner Access and HSS have together developed a new product that tackles this problem head on, providing a safe, low-level access solution: the AlphaStep (podium).
David Johnstone, HSS Hire Access Product Director remarks “We chose Turner Access as they were keen to work with us to develop this particular low level product. The AphaStep complements our access range and we are delighted with the end product”.
Turner Access are delighted to partner with HSS Hire as both companies share the same commitment to safety. Gary Gallagher, Managing Director of Turner Access comments “Proper selection of suitable equipment by the duty holder is a cornerstone of the new statutory requirements. This product extends the range of options open to HSS customers when working at low heights”.
HSS Hire are so pleased with the final product that they have placed an order for over 100 AlphaSteps. The addition of AlphaStep strengthens the existing HSS range of safety equipment which complies with the new 2005 Work at Height Regulations and, with the largest branch network in the UK and Ireland (over 400 branches), HSS Hire provides a one stop shop for both local and national customers.
The demand for the AlphaStep and other Turner Access low-level access equipment such as the SigmaDeck and OmegaDeck has been so great that the company is now in the process of expanding its factory premises and resources at the Glasgow Headquarters.
Date of Issue:
For further information, please contact Fiona Bell on 0141 309 5555
Notes:
AlphaStep
AlphaStep, also known as a Podium Step, is the brand new one-man low level access solution. Comprising of only 5 lightweight components and with a choice of 4 platform heights (up to 1m), this Podium Step provides safe, effective and economical internal access.
SigmaDeck
The SigmaDeck 250 access platform assembles and dismantles in seconds to provide a safe working platform up to a height of 1.6m. This low level access solution has been designed solely for internal use, can offer guardrail protection at all times and has compact folding dimensions for easy movement, storage and transportation.
OmegaDeck
OmegaDeck 250 is the aluminium bridging system from Turner Access, providing you with effortless up-and-over access. Ideally used in offices and manufacturing, the OmegaDeck provides quick and easy access over desks and machinery, minimising disruption.
Posted by Industrial-Manufacturing at 12:11 AM | Comments (0)
October 16, 2005
New Manufacturing Capability Expedites Historic Restoration Mortar Deliveries
Cathedral Stone Products, Inc. of Hanover, MD has installed new manufacturing equipment to mix and blend Jahn Historic Mortar formulations here in the USA. The new facility brings cost and delivery advantages to US and Canadian contractors involved in restoring and repairing buildings, monuments, bridges and large public works projects.
Hanover, MD (PRWEB) October 16, 2005 -- Cathedral Stone Products, Inc., the exclusive US manufacturer of Jahn restoration mortar products, has completed the installation of its all new manufacturing and testing laboratories at Company headquarters in Hanover, MD. Until now, Jahn restoration mortar products were formulated and shipped from Jahn's headquarters in Germany causing high transportation costs, delays and other inconveniences. With the new Hanover plant coming on-stream, orders can now be shipped within 24 hours, or in rare cases, 48 hours.
Cathedral Stone Products offers a full line of standard Jahn mortar mixes that are pre- engineered for long life and "breathable" compatibility with many different surface compositions such as, cement, limestone, brick, brownstone, terra cotta or stucco.
Architects and engineers seeking a custom mortar mix for a specific application send a sample of the exterior facing material taken from the building. Following careful analysis in the Cathedral Stone lab, mix proportions are adjusted to match critical physical properties such as porosity, tensile strength, bending and compression, and expansion/ contraction moduli. Color matching by the lab experts at Cathedral
Stone is another way Jahn repair mortars assure the building looks right when the job is completed.
Custom mix formulas are then programmed into their new manufacturing system via Cathedral Stone's proprietary software which interfaces with PLC controllers to precisely control the process. The pre-measured components are then vacuum delivered from the hoppers to the mixer where they are weighed on close tolerance scales and packed in 44 lb. buckets, or customer specified packaging.
To assure QC, remains from each order are always mixed, cured and tested before the product is shipped. A hardened sample block is retained by Cathedral Stone with the lot number noted to assure repeat orders are formulated to exactly match the color and other properties of the original order. In this manner, Cathedral Stone can guarantee batch-to-batch consistency of any custom mortar mix.
Cathedral Stone Products has been in operation since 1982 and has provided Jahn products for the restoration of the Empire State Building, the Ellis Island Immigration Museum, the White House, as well as numerous other historic public
buildings and churches around the country.
For more information and a free copy of the new full color Jahn brochure contact Kathleen Lawlor at Cathedral Stone Products, 7266 Park Circle Drive, Hanover, MD 21076. 410-782-9150. Fax 410-7820-9155. www.cathedralstone.com
Posted by Industrial-Manufacturing at 11:32 PM | Comments (0)
Third Party EIFS Inspections; Do you really need one?
Modern Wall Wall Systems is offering a free EIFS inspection to all non-profit organizations in the Mid-Atlantic area.
Chesapeake, VA (PRWEB) October 15, 2005 -- In an important recognition of it’s leadership, Modern Wall Systems, is pleased to announce that its’ EIFS division is currently reaching out to all non-profit organizations in the greater Mid-Atlantic area by offering a free non-intrusive EIFS inspection.
“The comprehensive report on the integrity of the walls around us is not only long overdue but it gives our customers greater peace of mind when using any EIFS products,” said Robert F. Santana, MWS’s EIFS division manager and co-owner. “Our non-intrusive inspections are conducted using the Tramex moisture meter, as well as the Delphia moisture scanner. These scanners are far more technologically advanced than the scanners used just over a year ago. And the best part is that once the inspection is complete, your building will be left intact. That means no holes in the walls caused by probes and other gadgets.”
This free EIFS inspection is the only consumer friendly solution on the market, and is conducted by industry trained professional EIFS installers and not by classroom or internet trained inspectors.
Modern Wall Systems has been in the EIFS business for over a decade and is no stranger to the stigma associated with EIFS and other wall claddings. With over a thousand inspections completed over the past ten years, MWS believes that the vast majority of damage associated with moisture intrusion stems from lack of education on the part of architects, builders, contractors, property owners and of course inexperienced inspectors.
“EIFS is not rocket science. If applied correctly and on cementious subtrates then there will be no nightmare stories of water damage and wood rot.” Said Robert “The thing is, in America we use a whole lot of wood when building our homes. Studs, walls and trim are almost always wood. Where there is wood, there is the potential for wood rot. Especially if the integrity of the EIFS has been compromised by poor sealants, poor craftsmanship or poor materials” he goes on to say, "The greatest added advantage of our service is that the report is conducted by an actual EIFS professional. Let’s face it; if your car starts pinging and ponging you wouldn’t take it to a car consultant. You would take it to an auto mechanic because a properly trained mechanic is all you need. The same simple concept is applied to our inspections. And once the inspection is complete, property owners receive an official document along with a list of practical solutions to remedy the problems, which may be used as they wish.”
Aside from the EIFS inspections MWS is also one of the fastest growing warranty companies dedicated to EIFS homes and commercial properties.
MWS offers many solutions to the growing local and national concerns facing property owners. MWS is also STI certified and an EIMA approved firm for conducting EIFS inspections, repairs and consultations, which means it meets the stringent standards of the Exterior Insulation Manufacturers Association for quality, dependability and experience.
About Modern Wall Systems
The company is the brainchild of veteran contractor Robert F. Santana and his Partner Daniel Perez. Their team spent two years researching, testing and refining their unique EIFS inspections to better accommodate the needs of the industry.
For more information on the service, or to order online, visit http://www.eifs101.bravehost.com or call 757-639-3764 or 757-673-6103
For immediate release:
Of interest to editors and journalists covering: The Exterior Insulation and Finish Systems, Home Remodeling, EIFS Inspections, EIFS products, general construction business
New innovative and comprehensive hands-on free EIFS inspections for non-profit organizations and low income homeowners
October 15, 2005
Contact: Robert F. Santana
Phone: 757-639-3764
Modern wall systems announces free Eifs moisture testing and warranty program. MWS is offering free EIFS inspections for all Non-Profit Organizations and Low Income Homeowners.
Posted by Industrial-Manufacturing at 11:31 PM | Comments (0)
Nonprofit organization Forms Strategic Partnerships to Build Safer Homes Along the Gulf Coast
Economic National Underprivileged Foundation mission is to revitalize the community, educate young adults on socio-economic issues through advocacy, and access to equity capital through entrepreneurship.
(PRWEB) October 15, 2005 -- Economic National Underprivileged Foundation (ENUF) has designed the "The Post Hurricane LMI Development Project" for Low/moderate Income Residents affected by Hurricane Katrina. It is integrated with the organizations "Project Turnaround" (PTA) which is the human capital component of the project. Project Turnaround will create jobs and develop unskilled young adults 18-30 years of age in low-moderate income communities impacted by natural disasters. The job skills start with marketing and progress towards business management, business development, and business ownership.
"The Post Hurricane LMI Development Project" will provide both job training and employment opportunities in the construction trade fields. The fact is that New Orleans Louisiana and other affected areas along the Gulf Coast will be rebuilt and these cities currently need everything under sun to create a new and better future. This has provided a unique opportunity for construction projects and employees, which are needed immediately. Studies show that roughly 160,000 residences and business will require some sort of restoration ranging from roofing work to complete demolishing.
ENUF has parnered with Custom Super Homes to build homes that are sturdier and more water-resitant than traditional homes.
Posted by Industrial-Manufacturing at 11:30 PM | Comments (0)
House Floor Plans - Classic to Contemporary
Guest articles have been posted on various subjects including house floor plans.
Articles range from floor plans to business printing needs.
Articles indexes are available at: Articles and Articles
Posted by Industrial at 11:45 AM | Comments (0)
October 14, 2005
MagneW Two-Wire PLUS Magnetic Flowmeter Slashes Installation Costs
Yamatake America continues to slash installation costs with the versatile MagneW Two-Wire PLUS Magnetic Flowmeter. Since the Yamatake Corporation of Japan terminated its brand-label agreement with Honeywell International, Inc., Yamatake America has taken an aggressive approach to the sales and distribution of the Yamatake product line. MagneW Two-Wire PLUS Electromagnetic Flow Meters serves all industrial markets including Biochemistry, Chemical, Petrochemical, Pharmaceutical, Municipal Utilities, Metal and Steel, Food & Beverage, and Pulp and Paper. Yamatake America, Inc. also continues to market Yamatake Pressure Transmitters and Temperature Transmitters throughout North America.
(PRWEB) October 14, 2005 -- Yamatake America continues to slash installation costs with the versatile MagneW Two-Wire PLUS Magnetic Flowmeter.
Data Sheet:
http://www.yainc.net/Spec/pdf/MagneW/MTG%202-wire_Brochure.pdf
Since the Yamatake Corporation of Japan terminated its brand-label agreement with Honeywell International, Inc., Yamatake America has taken an aggressive approach to the sales and distribution of the Yamatake product line. MagneW Two-Wire PLUS Electromagnetic Flow Meters serves all industrial markets including Biochemistry, Chemical, Petrochemical, Pharmaceutical, Municipal Utilities, Metal and Steel, Food & Beverage, and Pulp and Paper. Yamatake America, Inc. also continues to market Yamatake Pressure Transmitters and Temperature Transmitters throughout North America.
The Yamatake Electromagnetic Flow Meter product line has long been recognized as a leader in flow meter technology. The Yamatake MagneW Two-Wire PLUS magnetic flowmeter series consistently delivers reliable, accurate, performance at a fraction of traditional four-wire installation costs. Yamatake MagneW Two-Wire PLUS flowmeters are cost effective alternatives that allow the immediate replacement of outdated four-wire systems as the Yamatake system, formerly known as Honeywell Yamatake, greatly reduces costly cable runs, and simplifies overall installation and maintenance.
Yamatake now estimates, based on new installations, that it has quantifiable evidence showing that the MagneW Two-Wire PLUS series reduces or slashes cost of installations by 4 to 5 times versus four-wire models.
Backed by Yamatake Corporation’s world-wide reputation for design innovation, high-quality products, and precision manufacturing, Yamatake also manufactures accurate and reliable temperature transmitters and pressure transmitters.
Today, Yamatake recognizes the importance of the North American market and has decided to pursue this opportunity as part of a worldwide growth strategy. "Yamatake flowmeters, and magmeters are operating in more than 100,000 loops worldwide with more than 10,000 loops in North America alone," said Sales Director, David Miller.
Yamatake's electromagnetic flowmeters possess unique flow measurement technology that has been developed over the past 40 years, and each one is tailored to specific applications as is the MagneW Two-Wire PLUS for Biochemistry, Chemical, Petrochemical, Pharmaceutical, Municipal Utilities, Metal & Steel, Food & Beverage, and Pulp & Paper.
"Another example of our magmeters family," said Marketing Manager, Bob Harvey "is the MagneW3000 PLUS HENRI which -- by minimizing the output fluctuation caused by slurry -- AC and electrochemical noise -- is the ideal solution for many demanding applications across many different industries."
Contact Yamatake America, Inc. http://www.yainc.net/ for more information as Yamatake continues to slash installation costs with the versatile MagneW Two-Wire Plus Electromagnetic Flowmeter.
Additional information about Yamatake flowmeters can be obtained at:
http://www.yainc.net/flow_meters/
Yamatake America, Inc. also manufacturers and distributes pressure transmitters and temperature transmitters that are state of the art and used across a broad base of industries.
Pressure Transmitters: http://www.yainc.net/press_trans/
Temperature Transmitters: http://www.yainc.net/temp_trans/
About Yamatake Corporation and Yamatake America, Inc.
Yamatake America, Inc. is a wholly owned subsidiary of the Yamatake Corporation. Since our founding in 1906, Yamatake has built on its core of measurement and control technologies to maintain its position at the forefront of Japan's automation industry. Over our long history, during which we once operated under the name Yamatake-Honeywell, we have built a sterling reputation for providing optimum solutions in industrial automation, factory automation and building automation.
Industrial Automation: Process Control Systems, Field Instruments, and Control Valves for the industries, such as refining, petrochemical, chemical, pulp and paper, and public utilities
Control Products: Control Products for factories, such as semiconductor manufacturing, electric, electric components, industrial machinery, and automobiles
Building Automation: Systems and products for the building market, such as office buildings, factories, hotels and public facilities
Innovative Products: Innovative products developed with Yamatake's own advanced technologies.
Contact:
Dave Miller
1-888-2-magnew (1-888.262-4639)
or visit http://www.yainc.net/
Posted by Industrial-Manufacturing at 12:57 AM | Comments (0)
Seaboard Begins Work On Historic Eldridge Street Synagogue
Scaffolding covers the façade of the Eldridge Street Synagogue as a crew from Seaboard Weatherproofing & Restoration Company works to restore the fine detail of this historic building’s exterior.
New York, NY (PRWEB) October 14, 2005 -- Scaffolding covers the façade of the Eldridge Street Synagogue as a crew from Seaboard Weatherproofing & Restoration Company works to restore the fine detail of this historic building’s exterior.
Under the auspices of the not-for-profit Eldridge Street Project, the entire building is undergoing an extensive rehabilitation that is expected to cost a total of $12 million. The anticipated completion date of the façade work is December 2005.
The scope of Seaboard’s involvement with the project includes cleaning the beige brick façade, repointing the masonry, and restoring the large terra-cotta center window and the wood surrounds around the other windows. Seaboard will also replace seven ornamental finials removed in 1960. All work will be conducted by hand, using the same methods the original craftsmen used to give the building its special character.
“We are thrilled to be a part of the restoration of this wonderful architectural gem,” said Seaboard President Michael Ahearn. “We will work to reverse the ravages of time and bring this historic building back to its former glory.”
The elaborate façade features a large rose window, elaborate cornices, molded brick work, and Central Gable, along with keyhole-shaped windows that accommodate stained glass. Moorish touches include rounded arches, bell-shaped pinnacles, and intricately carved columns, which Seaboard will restore to their original condition.
Completed in 1887, the synagogue is the first great house of worship built in the United States by East European Jews. The congregation flourished through the 1920’s, when many Jews left the Lower East Side. Worshippers continued to gather in the building, but began meeting in the basement during the 1950’s as the main sanctuary deteriorated. Despite the setbacks, the congregation has not missed a weekly service since its founding.
The synagogue is the latest high-profile building in Manhattan that Seaboard has worked on. The company is currently working on the Woolworth Building and recently completed the restoration of 90 West Street, a Cass Gilbert masterpiece that The New York Times called the “miracle survivor of 9-11.”
About Seaboard Weatherproofing and Restoration Company: Based in Port Chester, NY, Seaboard Weatherproofing and Restoration Company is one of the leading restoration and alteration construction firms in the New York City metropolitan area. The company has received several accolades for its work on high-profile projects, including The Elephant House at the Bronx Zoo, The Cloisters museum, and 90 West Street, originally constructed in 1907 and designed by noted architect Cass Gilbert, which experienced extensive damage during the 9-11 attack. For more information, please call (800) 347-7464 or visit www.seaboardwpr.com.
Posted by Industrial-Manufacturing at 12:56 AM | Comments (0)
FlowSense Approved as Fargo Solution Provider (FSP) by Fargo Electronics
FlowSense announced today that it was approved as a Fargo Solution Provider of Fargo Electronics Inc.
(PRWEB) October 14, 2005 -- Continuing to expand its capability to deliver a variety of physical access control solutions, FlowSense can now offer the full range of Fargo Electronics ID products for a wide variety of industries including corporate, government, and education.
“We are excited about the opportunity to offer our clients the full range of Fargo ID products. Fargo Electronics is a recognized name in the access control industry. We expect a great deal of interest from the market place,” commented Bill Schlueter, Manager Business Development for FlowSense. “We will integrate the Fargo product lines into our overall suite of FlowSense Access Control Solutions (FACS) which already include iris scan, finger print and RFID access control.”
Fargo ID cards offer systems with smart cards, magnetic stripe cards, proximity cards and photo IDs. Fargo ID badge printers are used in access control systems, time and attendance tracking and asset protection. “Overall, it is a great mix of products that will make FlowSense a single source for top-notch access control solutions,” said
Schlueter.
About FlowSense
FlowSense is an award winning 8(a)/SDB certified and veteran owned technology company providing integrated technical solutions in environmental systems (air and water quality management), security technology (biometric access control), and industrial solutions (facilities contracting). FlowSense products and services include engineering, project management, and procurement serving diverse industries including private and public sectors, military, defense, and government agencies.
FlowSense is dedicated to providing a cleaner and safer environment for our clients at their facilities worldwide. To achieve this common objective, we offer an interconnection of components and services with practical products, technical excellence, and unmatched innovation. FlowSense physical access control solutions offer protection against loss, theft, terrorism, and other acts that threaten successful operation of our client resources.
About Fargo Electronics
Founded in 1974, Fargo Electronics is a global leader in the development of secure technologies for identity card issuance systems, including secure card printer/encoders, materials and software. The company has sold more than 100,000 systems in the U.S. and over 80 other countries worldwide. Fargo card issuance systems reduce vulnerabilities and potential for loss of time, money and lives by continually improving the security of identity credentials. Fargo provides physical, information and transaction security for a wide variety of applications and industries, including government, corporate, national IDs, drivers' licenses, universities, schools and membership. Based in Minneapolis, Minnesota. Fargo markets its products through a global distribution network of professional security integrators.
Posted by Industrial-Manufacturing at 12:55 AM | Comments (0)
Lansing Building Products Continues Aggressive Growth
Lansing Building Products, formerly known as Ted Lansing Corporation, has opened 4 new distribution facilities.
CHICAGO (PRWEB) October 14, 2005 -- Lansing Building Products, formerly known as Ted Lansing Corporation, has opened 4 new distribution facilities. These locations include Columbus, OH, Wilmington, DE, and their second locations in both Chicago and Minneapolis.
Lansing has also announced a new location in northeastern North Carolina to be opened this fall. Lansing Building Products is the largest independent distributor of exterior building products in the country. LBP was founded in 1955 and is celebrating their 50th year in business.
Posted by Industrial-Manufacturing at 12:54 AM | Comments (0)
October 13, 2005
Smart Building Products Now Offers Cost-Saving Corn Burning Technology for Home Use
Using a corn stove replaces fossil fuels, decreases the cost of heating your home in winter and supports a renewable resource.
Wallkill, NY (PRWEB) October 13, 2005 -- Smart Building Products, the online source for energy efficient product technology, now offers a solution to America's fuel crisis—cost and energy saving corn stoves for residential use. Energy engineer and Smart Building Products Vice President Eric Ackerly has provided many commercial corn-based boiler plant options to large facilities in the Northeast including Penn State University and the Pennsylvania Department of Corrections. He now proudly offers this energy and cost-saving technology for home heating use.
Residential corn stoves are a cheaper and cleaner alternative to heating with natural gas, oil and propane and are easy to install and use. They require only a dryer vent through an outside wall and usually require less than two hours to install. After setup, simply pour in a 50 lb. bag of corn, light the fire and walk away. It is not necessary to keep an eye on the stove, poke it or constantly add fuel to it. Corn stoves burn for at least 24 hours, depending on the setting selected, which is based on the outside temperature. Corn stoves don't produce messy ashes like wood and pellets do, only a small clump that can be crumbled to enhance any lawn or compost pile. In addition, inefficient fireplaces can be converted with a corn-burning insert.
Over 10 billion bushels of hulled corn are produced annually in the United States, making it the most widely available heating resource, renewable every 120 days. An extensive and very mature distribution system and delivery network already exists to bring corn across the country for livestock feed.
"Corn prices have been stable since agricultural recording began in the 1800s and have even been declining for the past 20 years," Mr. Ackerly explained. "In our suburban area, a 50 lb. bag of corn retails at a local feed store for $4.00. Even better pricing could be available directly through farmers in more rural areas. One bag is enough to heat an average home in the Northeast for a whole day in the dead of winter. Based on that, $600 would take care of your heat for the entire season. How does that compare with what you're paying now and what you expect to pay for fuel due to the hurricane damage to the Gulf Coast?"
Corn heat exhaust is environmentally safe, CO2 neutral, and non-toxic. No additional carbon by-products are released during combustion into the home or into the atmosphere, which helps eliminate the buildup of greenhouse gases. If corn is spilled, it does not contaminate the soil or groundwater and would not require remediation. Additionally, corn stoves do not require special permits.
"Burning corn is an established technology brought to the forefront again because of rising prices of both domestic and foreign fossil fuel supply and the interruption of fossil fuel refinery production," Mr. Ackerly added. "Obviously, corn is the fuel for the future; former President Jimmy Carter foresaw this in 1980 when a corn stove was installed in the White House. Your house will be in good company."
In addition to large biomass boiler plants for commercial applications, Smart Building Products offers three corn stove sizes and models available for purchase with direct shipping options as an Amaizeablaze corn stove authorized dealer.
About Smart Building Products
Smart Building Products sets the standard for energy efficient product technology, providing unique energy solutions for existing facilities. They specialize in engineering, design and turn-key implementation of energy reduction strategies to include their products as well as commodity energy savings products. Smart Building Products technologies can be found in school districts, distribution centers, convention centers, manufacturing and assembly plants, and a host of other end users to increase the efficiency, reliability and the quality of their lighting, electrical, and mechanical/HVAC systems.
Contact:
Eric Ackerly
Smart Building Products
845-566-9329
e-mail protected from spam bots
http://www.smartbuildingproducts.com/Amaizablaze.htm
Posted by Industrial-Manufacturing at 01:00 AM | Comments (0)
Insul-8 Corporation and Other Delachaux Mobile Electrification Companies to Strengthen and Coordinate Operations Under the CONDUCTIX Name
On Jan. 1, 2006 Insul-8 Corporation will become CONDUCTIX. The new name reflects Insul-8’s broad “mobile electrification” product offering, engineering expertise, and leadership in transferring power and data to moving machinery.
Omaha, NE, (PRWEB) October 13, 2005 -- On Jan. 1, 2006 Insul-8 Corporation will become CONDUCTIX. The new name reflects Insul-8’s broad “mobile electrification” product offering, engineering expertise, and leadership in transferring power and data to moving machinery.
CONDUCTIX locations around the world will be closely allied and coordinated to capitalize on the company’s global resources. At the same time, CONDUCTIX will maintain the local management and superior service that its customers have come to expect. Facilities will include former Insul-8 locations in the US, the UK, Canada, Australia, and Mexico; as well as Delachaux (parent company) locations in France, Benelux, Germany, Italy (COMES Italia), and China (Han Fa). The new organization will strengthen CONDUCTIX’s leadership role in worldwide mobile electrification markets.
Rationale for the Change
Lon Miller, president of CONDUCTIX US, Canada, Mexico, and Australia, explains: “We’ve built our business on the strengths and proud traditions of Insul-8 and its predecessor companies, but our industry has become increasingly global. To convey a clear, strong, and unified brand identity and presence across the globe, we are adopting a single corporate name.”
Miller continued: “The CONDUCTIX name accurately reflects our core business, products, and engineering capability. A customer purchasing a CONDUCTIX product anywhere in the world will receive our cumulative experience, technical knowledge, and world class support. We are certain that customers will appreciate the broad scope that CONDUCTIX represents.”
Strengthened Operations for World Class Manufacturing
Miller went on to say: “CONDUCTIX is committed to being a single-source supplier and a leader in power and data transfer. To that end, we have invested heavily in our people, equipment, quality systems, and facilities. We have completed a 25,000 square foot expansion in our Harlan, IA plant and a 17,000 square foot expansion at our Omaha, NE facility. All plants are ISO9001:2000 certified and operate based on a stringent ‘Zero Defect’ philosophy.”
The Early Days of Insul-8
In 1944, Insul-8 Corporation was founded as a California manufacturer of conductor bar and cable festoon systems. The name “Insul-8” came from its innovative “safety-insulated figure-8” conductor bar. 8-Bar quickly became the standard electrification method for the overhead crane industry. In the late 1950’s, Insul-8 pioneered the use of aluminum/stainless steel conductor rail for transit systems and mill applications. In 1948, in Omaha NE, a separate company – Industrial Electric Reels (IER) - was founded as a branch of Industrial Electric Works. IER was a pioneer in the development of spring and motor driven cable and hose reels, and electrical slip rings used to power rotating machinery.
In 1975, the two companies became part of the Delachaux Group. In 1991, the original Insul-8 company relocated to Harlan, IA. Both Insul-8 and IER became a single company operating under the Insul-8 Corporation name in 1996.
About The Delachaux Group
The Delachaux Group, founded in 1902 and headquartered near Paris, France, is a leading supplier of mobile electrification products worldwide. Delachaux is also a world leader in railroad rail welding, rail component manufacturing, magnets and magnetic separating machinery, cable making machinery, and chromium production.
Insul-8 Today
Insul-8 - soon to be CONDUCTIX - has earned an international reputation for technical innovation and product application expertise. CONDUCTIX/Insul-8 products feature superior quality, long service life, and ease of maintenance. The company is also known for its rapid delivery, state-of-the-art manufacturing, and the best customer service in the industry. CONDUCTIX/Insul-8’s ability to customize existing products and develop one-of-a-kind products for demanding industrial applications sets it apart from its competitors.
CONDUCTIX/Insul-8 has more than 12,500 miles of conductor bar and collectors installed around the world. The majority of overhead cranes in North America run on Insul-8 bar and festoon. Every major port on the US West Coast powers its container cranes with Insul-8 bar. Insul-8 conductor rails power mass transit and people mover systems such as the Disney monorail, Newark and DFW airports, Vancouver Sky Train, Las Vegas Monorail, and urban people movers in Kuala Lumpur and Bangkok. CONDUCTIX/Insul-8 cable reels and slip rings are used in numerous industrial applications. The company pioneered the used of magnetic coupler technology in cable reel applications. In recent years CONDUCTIX/Insul-8 introduced a line of push button pendants and radio remote controls.
In 2006, CONDUCTIX will introduce a line of cable carriers worldwide, allowing the firm to offer every mode of mobile electrification currently available. The company will also introduce “Smart Drive” cable reels utilizing advanced programmable variable frequency drives.
CONDUCTIX “Mobile Electrification” Markets
The reorganized CONDUCTIX will focus on increasing its share of core mobile electrification markets worldwide. These markets include: overhead cranes, conveyors, automated storage/retrieval systems, bulk material handling systems, mining/construction equipment, transit systems, converting/packaging machines, and agricultural equipment. Products are also sold for factory automation, amusement rides, car wash systems, theater lighting/sound, water treatment plants, and a myriad of other applications. CONDUCTIX products are sold directly to OEMs, and to users through electrical and industrial catalogs and distributors.
For more information, specifications or a Free four color Corporate Brochure, contact: CONDUCTIX, 10102 F Street, Omaha, NE 68127. Phone numbers are: (800) 521-4888 or (402) 339-9300. Fax number is: (402) 339-9627. Website: insul-8.com.
Editors Note: For a reproducible, electronic photo, contact Rod Griffith at: (800) 521-4888, ext. 219.
Posted by Industrial-Manufacturing at 12:59 AM | Comments (0)
Canada’s $130 Billion Infrastructure Deficit Examined by ReNew Canada Magazine
There is an urgent and pressing need to rebuild roads, bridges, schools, water treatment facilities and community services in Canada. The infrastructure gap is growing at $2 billion a year and ReNew Canada magazine serves the government and industry readers who are doing saomething about it.
Toronto, ON (PRWEB) October 13, 2005 -- ReNew Canada, Canada’s business magazine covering infrastructure renewal in Canada, launched its premiere issue this week in conjunction with Canadian Brownfields 2005 -- a Canadian Urban Institute conference being held at the Chateau Laurier in Ottawa, ON.
“This magazine is the first of its kind in Canada,” says Todd Latham, ReNew Canada publisher. “It’s an opportunity to unite governments, agencies and organizations in their efforts to address the infrastructure deficit facing municipalities across the country. It will provide a forum for debate and the exchange of ideas as well as serve as the voice for the very concept of infrastructure.”
ReNew Canada represents a refreshing, open approach to the discussion of infrastructure renewal in Canada. ReNew Canada has been developed for those in the private and public sectors to consider the “3Rs”: ReThink, ReBuild, ReVitalize! ReNew Canada will provide a voice to bridge the communications gap between government, industry professionals and citizens.
The premiere issue of ReNew Canada features a host of noteworthy editorial contributors from across Canada including: Hon. John Godfrey, Minister of State responsible for Infrastructure and Communities; Sam Katz, Mayor of Winnipeg; and David Crombie, President of the Canadian Urban Institute and a former mayor of Toronto.
“The task facing Ontario -- and governments across Canada -- is to repair the damage caused by past neglect and to prepare for the growth that is coming. By some estimates, in Ontario, more than $100 billion will be needed over the next 30 years to bring our public infrastructure into a state of good repair and accommodate the growth we know is coming. ReNew Canada will provide a place where we can discuss those challenges with others in the field, and find ways to implement the programs that will be needed,” says Hon. David Caplan, Ontario Minister of Public Infrastructure Renewal in a letter to the editor.
“Many Canadians are convinced that governments cannot keep pace with the demand for new or improved public infrastructure. As the repair bills mount and Canada’s aging public infrastructure moves ever closer to the end of its useful life, it is increasingly obvious that others will want to look at public-private partnerships as an option whose time has come,” says Michael Wilson, former federal cabinet minister and chairman of the Canadian Council for Public-Private Partnerships in a feature article in ReNew Canada’s October 2005 issue.
“Everybody’s talking about the infrastructure problem,” says Latham. “ReNew Canada will be a part of the solution.”
ReNew Canada is published by We Communications Inc., an experienced publishing and marketing company with offices in Toronto and Winnipeg. In addition to ReNew Canada, We Communications Inc. also publishes two other industry-leading magazines - Canadian Water Treatment and Canadian Meat Business.
For more information, visit www.renewcanada.net or contact:
Todd Latham, Publisher
ReNew Canada
1.800.344.7055
e-mail protected from spam bots
Posted by Industrial-Manufacturing at 12:58 AM | Comments (0)
Georgia Department of Labor Hosts Annual Conference
Georgia Department of Labor will be hosting its 2005 Georgia Safety, Health & Environmental Conference October 19-21, 2005 in Savannah, GA.
Atlanta, GA (PRWEB) October 13, 2005 – Georgia Department of Labor will be hosting its 2005 Georgia Safety, Health & Environmental Conference October 19-21, 2005 in Savannah, GA. Project Safe Georgia is a coalition of businesses, government and academic professionals volunteering to address the safety, health, environmental and workers’ comp needs for all Georgia businesses.
Georgia Tech Research Institute, a leader in Occupational Safety and Health Training, will be one of the main sponsors of this event. GTRI will be at the event promoting their 2006 Occupational Safety and Health Courses, along with providing attendees with the current Course Catalog and taking on-site registrations for future courses. Experienced faculty of GTRI will be hosting the booth and will be available to answer questions about our training programs and research facilities. For more information about the upcoming conference, please go to www.projectsafegeorgia.org.
Georgia Tech Research Institute is extremely proud of the 2,700 individuals we trained in 2004. GTRI is focused on providing quality training with the best possible selection of course topics at the level you need for professional development. Register for all Safety and Health courses at Georgia Tech by going www.oshacourses.org.
About Georgia Tech Research Institute
Georgia Tech Research Institute (GTRI) is the nonprofit applied research arm of the Georgia Institute of Technology in Atlanta, GA. Our approximately 1,200 employees perform or support more than $100 million in research yearly for more than 200 clients in industry and government. To learn more about GTRI, visit http://www.gtri.gatech.edu.
Posted by Industrial-Manufacturing at 12:56 AM | Comments (0)
Taxi Drivers Enthused About Fuel Savings Test Results
The worldwide impact of record high fuel prices has placed an unprecedented burden further stretching already strained fuel budgets and consumer pocketbooks.
(PRWEB) October 13, 2005 -- The worldwide impact of record high fuel prices has placed an unprecedented burden further stretching already strained fuel budgets and consumer pocketbooks.
Like many consumers, including taxi companies around the globe, myriad fuel additives and/or fuel conditioners have been used and tested with minimal or no noticeable difference in fuel savings, much less reduced emissions. Making matters worse, many left behind damaged engines and/or fuel systems.
Dial-A-Cab, a London based taxi consortia, was recently contacted with another company promoting a fuel conditioner, this time in the form of a PowerPill called the Ring SMS UBiee Power Pill, claiming usage would provide:
· Fuel Savings
· Reduced emissions
Originating with N.A.S.A. during research for a rocket propellant that would reduce volatility, it was discovered that their new product would reduce sulfur and water content in both gasoline and diesel fuel, thus enabling fuel to run cleaner and better.
New Image International, a product development company, bought the rights under agreement to a marketing moratorium of 10 years outside of Asia and New Zealand. A decade later, manufactured under ISO 9001 Quality Assurance Program, exclusive marketing rights were secured in three continents by Ring SMS UBiee, and the PowerPill, aka Power Pill Fe-3, has begun to resonate its fuel savings, maintenance savings, and emission reduction around the globe.
Call Sign Magazine announced that Dial-A-Cab would be testing the UBiee Power Pill in their September 2005 issue, promising to publish results in their October 2005 issue. Claims of fuel savings and emission reductions, hydrocarbon compatibility, burning completely, and leaving behind no residue build-up inside engine, the UBiee PowerPill fuel conditioner was put to a rigid test.
The October 2005 issue published results from all tests, resounding “…drivers say it works!”
Ring SMS UBiee CEO and President, Dr. Michael U. Dolgoruky, not surprised by the fuel savings or emission reductions, stated, “Not only does it help performance, fuel consumption and emissions, but our experience shows that parts connected to the fuel, such as filters and injectors, etc., are also lasting much longer, also adding to the savings brought on by the Power Pill”. Global reports are published at http://www.thepowerpill.com/tests
With record high fuel prices, welcome relief for consumer budgets receives a helping hand via a tested and proven environmentally friendly product known as the UBiee Power Pill, accompanied with an historically proven track record resulting in fuel savings and emission reduction, as well as maintenance savings and extended engine life.
Contact Info: Dee Scrip
Phone: 1-412-571-1855
Web: http://www.thepowerpill.com
Posted by Industrial-Manufacturing at 12:55 AM | Comments (0)
Gain Knowledge of the Engineering Services Industry Within the US
Research and Markets (http://www.researchandmarkets.com/reports/c25450) has announced the addition of Engineering Services in the US to their offering.
Dublin (PRWEB) October 13, 2005 -- Research and Markets (http://www.researchandmarkets.com/reports/c25450) has announced the addition of Engineering Services in the US to their offering.
This industry comprises establishments primarily engaged in applying physical laws and principles of engineering in the design, development, and utilization of machines, materials, instruments, structures, processes, and systems. The assignments undertaken by these establishments may involve any of the following activities: provision of advice, preparation of feasibility studies, preparation of preliminary and final plans and designs, provision of technical services during the construction or installation phase, inspection and evaluation of engineering projects, and related services. This report covers the scope, size, disposition and growth of the industry including the key sensitivities and success factors. Also included are five year industry forecasts, growth rates and an analysis of the industry key players and their market shares.
Contents are as follows:
Industry Definition
Key Statistics
Market Characteristics
Segmentation
Industry Conditions
Performance
Key Competitors
Key Factors
Outlook
For more information visit http://www.researchandmarkets.com/reports/c25450
Laura Wood
Senior Manager
Research and Markets
Fax: +353 1 4100 980
Posted by Industrial-Manufacturing at 12:54 AM | Comments (0)
Total View of Architectural Services in the US with Five year Forecasts
Research and Markets (http://www.researchandmarkets.com/reports/c25464) has announced the addition of Architectural Services in the US to their offering.
Dublin (PRWEB) October 13, 2005 -- Research and Markets (http://www.researchandmarkets.com/reports/c25464) has announced the addition of Architectural Services in the US to their offering.
This industry comprises establishments primarily engaged in planning and designing residential, institutional, leisure, commercial, and industrial buildings and structures by applying knowledge of design, construction procedures, zoning regulations, building codes, and building materials. This report covers the scope, size, disposition and growth of the industry including the key sensitivities and success factors. Also included are five year industry forecasts, growth rates and an analysis of the industry key players and their market shares.
Contents are as follows:
INDUSTRY DEFINITION
Industry Definition
List of Activities
Similar Industries
Other Related Industries
KEY STATISTICS
Current Prices Table
Constant Prices Table (applicable deflator applied)
Real Growth Table
Ratio Table
Statistics Available: Revenue, Industry Gross Product, Enterprises, Establishments, Employment, Imports, Exports, Assets, Total Wages, Domestic Demand
MARKET CHARACTERISTICS
Market Size
Linkages
Downstream Industries
Upstream Industries
Demand Determinants
Domestic and International Markets
Basis of Competition
Life Cycle
SEGMENTATION
Products and Service Segmentation
Major Market Segments
Industry Concentration
Geographic Spread
INDUSTRY CONDITIONS
Barriers to Entry
Taxation
Industry Assistance
Regulation and Deregulation
Cost Structure
Capital and Labor Intensity
Technology and Systems
Industry Volatility
Globalization
PERFORMANCE
Current Performance Analysis with data series
Historical Performance Analysis
KEY COMPETITORS
Major Players Market Share
Player Performance Analysis
KEY FACTORS
Key Sensitivities
Key Success Factors
OUTLOOK
Industry Forecast Analysis with five year forecast data series
For more information visit http://www.researchandmarkets.com/reports/c25464
Laura Wood
Senior Manager
Research and Markets
Fax: +353 1 4100 980
Posted by Industrial-Manufacturing at 12:53 AM | Comments (0)
Randall Hall Shares His Knowledge to Support an Aging Need
Home modifications for the aging-in-place has quickly become the fastest growing segment in the remodeling industry. However, the program is so new that few remodeling experts have invested in the certification. As a result, Randall Hall has taken it one step further – he teaches CAPS courses to other remodeling professionals through the Dallas HBA.
You might not realize it now, but the fastest growing segment in residential remodeling may eventually catch up with your family. It has little to do with paint swatches and gold leafing… and everything to do with finding comfort in one’s own home for a lifetime.
In May 2002, the NAHB Remodelers Council, in collaboration with the AARP, NAHB Research Center, and NAHB Seniors Housing Council, developed the Certified Aging-in-Place Specialist (CAPS) program. The course teaches the technical, business management, and customer service skills essential to completing projects for older individuals who need to remodel their homes to meet their needs as aging adults.
When the program was introduced, Randall Hall of Randall Hall Design/Build was immediately involved, becoming the first remodeling professional in Dallas – and one of the first in Texas – to receive the certification. “Our lives are priceless from beginning to end, “ states Hall. “The CAPS program was designed to allow our grandparents, our parents, even ourselves to live with the comforts that only home can offer.”
Home modifications for the aging-in-place has quickly become the fastest growing segment in the remodeling industry. However, the program is so new that few remodeling experts have invested in the certification. As a result, Randall Hall has taken it one step further – he teaches CAPS courses to other remodeling professionals through the HBA. In addition to gaining CAPS certification, program attendees can expand their understanding of the aging-in-place market while gaining insight from Hall, who has made RHI one of the nation’s most successful remodeling firms.
With the support of Randall Hall and his like-minded peers, CAPS certification is likely to become a norm in the remodeling industry. This reality alone is giving families across the nation the reassurance of being able to call a house a "home" for a lifetime.
CONTACTS & LINKS
Randall Hall Design/Build:
214.341.3365
www.randallhall.com
CAPS Program Information:
www.nahb.org
www.dallasbuilders.com
PR/Media Contact:
Christina Alexandra
214.642.5935
e-mail protected from spam bots
Posted by Industrial-Manufacturing at 12:52 AM | Comments (0)
Home Improvement and Sharpening Specialist, Alan Therrien, Takes Business to Southern Maine”
Home Improvement and Sharpening provided in Southern Maine and South East New Hampshire.
Lebanon, ME (PRWEB) October 13, 2005 -- Perfect Edge Home Improvement and Sharpening Service, owned and operated by Alan Therrien, now offering services in Southern Maine.
Owner, Alan Therrien, has 25 years experience in Vinyl Siding, Seamless Gutters, Replacement Windows and Sharpening. Besides offering services in Southern Maine, Perfect Edge also extends to areas in South East New Hampshire.
Perfect Edge Home Improvement and Sharpening Service is an owner applicator business with Alan Therrien performing all work and services. Perfect Edge provides free estimates for work and can be reached 7 days a week. Rest assured, Perfect Edge is also fully insured.
Home Improvement services provided include Vinyl Siding installation and repair, installation of Seamless Gutters and Down Spouts, and Vinyl Replacement Windows.
Sharpening Services provided include sharpening of knives, industrial knives, steel circular saws, carbide circular saws, chain saw chain, hand saws, scissors, and other garden and miscellaneous tools. A price list of sharpening expenses can be found on the Lebanon, Maine town website at http://www.lebanon-me.org/default.shtml
For more information please contact Alan Therrien for a free quote or explanation of services.
Posted by Industrial-Manufacturing at 12:51 AM | Comments (0)
SMB Leverages Technology to Defy Post Katrina Obstacles and Stay in Business
New Orleans based firm uses online business collaboration suite to ensure business continuity despite the hurdles from Katrina.
Vienna, VA (PRWEB via PR Web Direct) October 12, 2005 -- As businesses slowly move back into the regions affected by Katrina, some have been lucky enough to find their workplaces intact. However, an office is only as effective as the workers in it. Many workers are still not able to return to New Orleans to fill their office spaces. Their houses have been destroyed, and workers are displaced around the country and may not be returning for some time.
One such SMB experiencing this roadblock is 365 Connect, a community housing communications firm, located in New Orleans. While the office was located on the 28th floor and left largely unaffected by the floodwaters below, employees were not so lucky. Many had their homes destroyed or have not been allowed back yet. This left 365Connect with a problem: How to keep business continuity without workers in the office.
365Connect turned to online business collaboration provider HyperOffice for the solution. Kerry Kirby CEO of Intradel, 365's parent company, explains, "HyperOffice will enable communications among our staff while we are still scattered about. It will also allow us access to all our contacts and important documents from anyplace on the planet." Using HyperOffice, 365Connect has turned into a "virtual office".
HyperOffice will be playing a role in 365Connects's business continuity strategy and disaster plan. Mr. Kirby asserts, "Katrina wiped out 621,973 housing units between Louisiana and Mississippi, our development company plans to assist in rebuilding these communities along the Gulf Coast. As we have deployed personnel to Mississippi to work on projects there, HyperOffice is keeping us connected and is the hub for us to pass documents back and forth. It will be a vital tool for us going forward."
Mr. Kirby finishes by saying, "(We) can fully appreciate what HyperOffice has done for the backbone of America, the small business use. While the bulk of the software industry gears their products to the large corporate users, HyperOffice has maintained the roots from which all businesses evolve."
About HyperOffice
HyperOffice, a leading hosted intranet provider, offers a simple and affordable suite of intranet applications providing new and growing businesses essential tools to collaborate, communicate, and manage information from any browser running on any platform. HyperOffice is run by an experienced team that draws on their first-hand understanding of small business pressures and experience with communication & collaborative solutions. First launched in 1998, HyperOffice led the category with 150,000 users. HyperOffice has received broad market recognition and is used around the world by a growing number of innovative small businesses. For more information, please visit www.HyperOffice.com or call 800-434-5136.
PR Contact:
Michael Harke, HyperOffice
1.800.434.5136, ext 113
Posted by Industrial-Manufacturing at 12:50 AM | Comments (0)
October 12, 2005
NAWIC Honors Two Outstanding Women for Their Roles in Nontraditional Fields at its 50th Annual Celebration and Convention
“A small group of thoughtful people can change the world. Indeed, it's the only thing that ever has.” Margaret Mead. More and more women are entering into nontraditional careers in construction and achieving tremendous success.
Fort Worth, TX (PRWEB) October 12, 2005 -- The National Association of Women in Construction (NAWIC) is pleased to announce the winners of its 11th annual Crystal Vision Awards Program. The mission of the Crystal Vision Awards Program is to recognize individuals who promote, expand and encourage the role of women in the construction industry. Edith Stanfield is the recipient of the Crystal Achievement Award, which is awarded to a NAWIC member, and Faye Turner is the recipient of the Crystal Vision Award, which is awarded to a nonmember of NAWIC.
Stanfield is president of S & J Electric (S & J) where she oversees all aspects of corporate management. Stanfield has encouraged and empowered women in construction by influencing policy in agencies, creating company policy at S & J, enacting legislation through local, state and federal governments, and initiating organizational structure at her company.
As a woman who started an electrical subcontracting business at the age of 53, Stanfield is sensitive to the issues women face while working in construction. As the visionary of S & J, she ensures the company is flexible to employees’ needs. Stanfield has been a member of the Fort Worth, Texas, Chapter since 1995. She and her company support NAWIC through their gifts of time, talent and monetary contributions. Stanfield encourages her employees to be involved in the organization and supports their efforts of volunteering their time, attending meetings and promoting the chapter’s efforts in the community.
Turner is the founder and executive director of Women Helping Women (WHW). WHW is a program designed to help women in crisis become self-sufficient through training and job placement in nontraditional trades. Turner began working with WHW full-time in 1999. WHW helps women who are ready to break free from their current situations by stepping up and taking charge of their lives.
Joann Boss, President of the Board of Directors for Women Helping Women, had this to say, “The construction industry is seeking a more diverse work force but has not had great success recruiting and retaining women. Faye Turner successfully broke through long-standing barriers in the industry. Her steadfast belief in the mission of Women Helping Women, the risks she was willing to take to promote something new, and her leadership in recruiting the talent she needed for the organization to succeed are just a few examples of why she is so deserving of this award.”
Stanfield and Turner were honored on September 10, 2005 for their achievements during the Crystal Vision Awards Gala at NAWIC’s 50th Anniversary Celebration and Convention in Grapevine, Texas. The recipients of this year’s Crystal Vision Awards program were selected by a panel of three judges: Doug Curtis, director of chapter development, Associated Builders & Contractors (ABC); Michael Holland, executive vice president, American Council for Construction Education (ACCE); and Norbert W. Young, Jr., FAIA, president, McGraw-Hill Construction.
The Crystal Vision Awards Program was established by NAWIC Past National President Susan Levy in 1995. The program recognizes individuals who promote the role of women in construction through initiatives, policies or legislation. The Crystal Vision Award recognizes a nonmember of NAWIC, and the Crystal Achievement Award recognizes a member of the Association. Since the first visionaries were selected in 1995, this one-of-a-kind program has not only fulfilled its purpose of recognizing exemplary leaders in the industry, it has developed a reputation for honoring individuals who are committed to building a diverse work force amidst the demanding backdrops of the industry today.
Kara Roberson, (817) 877-5551
Communications Director
National Association of Women in Construction
e-mail protected from spam bots
www.nawic.org
Posted by Industrial-Manufacturing at 01:29 AM | Comments (0)
American Micro Industries Introduces New Specialty Acoustical Sound Absorption Panels
American Micro Industries has recently introduced their proprietary SOFT SOUND ACOUSTIC PANELS™ for use in residential, commercial and industrial applications.
Chambersburg, PA (PRWEB) October 12, 2005 -- American Micro Industries has recently introduced their proprietary SOFT SOUND ACOUSTIC PANELS™ for use in residential, commercial and industrial applications. Offering excellent aesthetic appearance, SOFT SOUND ACOUSTIC PANELS™ improve interior acoustics by reducing reverberation time or echoes inside homes, offices, theatres, gymnasiums, worship areas, commercial kitchens and manufacturing environments. With Noise Reduction Coefficients (NRC) reaching up to 1.10, Soft Sound will significantly enhance interior acoustical quality by reducing noise levels throughout the audible frequency range.
SOFT SOUND ACOUSTIC PANELS™ are available in a variety of sizes, fabrics, colors and edge configurations to meet any desired acoustical and interior design requirements. The company offers several mounting methods to accommodate all surface conditions. American Micro Industries, Inc. can provide computer generated analysis of any interior room environment and provide installation recommendations to provide an optimal acoustical solution for your application.
SOFT SOUND ACOUSTIC PANELS™ are rated Class “A” and have passed the 25/ 50 flame and smoke ratings as determined by the ASTM-E-84 Tunnel Test.
SOFT SOUND ACOUSTIC PANELS™ are also available in tackable and washable versions to meet specific application requirements.
AMI offers their Quick Ship program for 2’x 2’ and 2 x 4’ panels in three colors. Custom orders will ship in 2-3 weeks after completion of engineering work and receipt of order.
American Micro Industries has been a leading provider of specialty acoustical products and “sound solutions” for North America since 1995. AMI offers their Quick Ship program from several locations throughout the United States and is continuously developing leading state-of-the art acoustical solutions for residential, commercial, and industrial applications. To learn more about SOFT SOUND ACOUSTIC PANELS™ and our other acoustical products go to our website www.soundprooffoam.com or contact us at 800.558.2058 in the USA or 717.261.9191 outside the USA
About American Micro Industries, Inc.
Since 1995, American Micro Industries, Inc. has been a fabricator and distributor of specialized products. American Micro Industries, Inc. is a privately held, veteran owned business located in the mid-Atlantic region of the US in South Central Pennsylvania, conveniently located within 200 miles of almost 40% of the US population. In addition to its Chambersburg headquarters, AMI has numerous shipping locations to provide the highest level of logistics. For more information, visit the AMI website at www.americanmicroinc.com.
Posted by Industrial-Manufacturing at 01:28 AM | Comments (0)
American Micro Industries, Inc. Is Proud To Announce Their Solution For Difficult Noise Reduction Problems
AMI recommends utilizing QUIET BARRIER™ sheets with AMI’s Ultra Touch acoustical absorbers in a traditional 2 ft. x 4 ft. or 2 ft. x 6 ft. stud drywall assembly for difficult noise reduction problems.
Chambersburg, PA (PRWEB) Oct. 12, 2005 –- American Micro Industries, Inc. announces that the company will offer a solution for difficult noise reduction problems. AMI recommends utilizing QUIET BARRIER™ sheets with AMI’s Ultra Touch acoustical absorbers in a traditional 2 ft. x 4 ft. or 2 ft. x 6 ft. stud drywall assembly. This combination of materials provides an excellent acoustical and thermal insulation envelope for residential, commercial, and industrial applications.
QUIET BARRIER™ is a flexible 2lb Acoustic Vinyl Barrier. This high density material with a smooth surface designed to reduce noise transmission between two spaces. QUIET BARRIER™ is available with a pressure sensitive adhesive (PSA) for an easy peel and stick application. QUIET BARRIER™ is a superior sound blocking material that can be used for loud noise, especially in the mid and lower ranges such as voices, music and heavy bass. This material blocks 80% – 85% of airborne sound (When installed correctly.) 1/4 inch thick, 2 lb. per sq. ft.
Ultra Touch is an acoustic and thermal insulation made from high quality natural cotton fibers. Not only is this dense, flexible product extremely effective as a sound / noise absorber, it also acts as a very effective thermal insulator with R-values of 13 and 19. Ultra Touch is a Class-A building material that meets or exceeds the highest ASTM testing standards for fire and smoke ratings, fungi resistance and corrosiveness. This environmentally friendly product does not contain Volatile Organic Compounds (VOCs) or chemical irritants. Ultra Touch contains 85% post-industrial recycled, natural fibers and is considered a high quality, sustainable / green building material. Does not itch and is easy to handle with no tools required.
These products are available at AMI’s Acoustical Products Division’s Website www.soundprooffoam.com, which was designed to reflect their increased commercial focus and industry expertise. This Website is intended to provide quality, high-end, professional soundproofing and acoustic products.
About American Micro Industries, Inc.
Since 1995, American Micro Industries, Inc. has been a fabricator and distributor of specialized products. American Micro Industries, Inc. is a privately held, veteran owned business located in the mid-Atlantic region of the US in South Central Pennsylvania, conveniently located within 200 miles of almost 40% of the US population. In addition to its Chambersburg headquarters, AMI has numerous shipping locations to provide the highest level of logistics. For more information, visit the AMI Website at www.americanmicroinc.com.
Posted by Industrial-Manufacturing at 01:26 AM | Comments (0)
NiteLites to Radiate within the America’s Center at the 25th Home and Remodeling Show October 14th – 16th
NiteLites, the outdoor lighting professionals, will shine at the 25th Home and Remodeling Show. The home event runs from October 14th -16th at the America’s Center in St. Louis, Missouri
ST. LOUIS (PRWEB) October 12, 2005 -- The 25th Home & Remodeling Show opens Friday, October 14th and NiteLites of St. Louis will be on hand to showcase their low-voltage landscape and architectural lighting applications. The show runs from October 14th – 16th at the America’s Center and will be open Friday (1pm - 9:00 pm), Saturday (11:00 am - 9 pm), and Sunday (11:00 am - 5:00pm).
NiteLites is an industry leader in the outdoor lighting field and specializes in both commercial and residential applications. The staff of NiteLites of St. Louis, including owner Scott Biason will exhibit their comprehensive package of superior outdoor lighting systems and service for both residential and commercial properties. While enjoying all of the exhibits, stop by the NiteLites’ booth and visit Mr. Biason for more information about NiteLites comprehensive lighting systems.
NiteLites is an industry leader in the low voltage, outdoor landscape and architectural lighting field and specializes in both residential and commercial installations.
NiteLites specializes in creating many different lighting effects for your home or commercial lighting project. Some of these effects include:
Accent and spotlighting – To add drama to a landscape or to focus attention on a specific architectural feature of a home by shining an intense spotlight on it.
Path or outdoor lighting – Placing fixtures at a low level to make walking on a garden path safer and more serene.
Washing – Installing a light at the base of a wall or hedge to wash light over the surface, creating a soft glow effect.
Up lighting – Shining a light up from the ground into the branches of a tree to accentuate the shape of the tree and to highlight its foliage.
Moonlighting – By locating lights 14 to 16 feet up in the branches of taller trees and angling the light upward, a romantic moonlight effect is created. To create a subtle, whimsical lighting effect on the ground, similar to a full moon shining through the trees, the well elevated fixtures will be angled in the ground direction.
Shadowing – Installing spotlights low in front of a tree or statue with a striking profile will create shadows with depth. To create an even more dramatic look, your lighting designer may place the lights high above the focal point.
Silhouetting – By positioning lights behind and below an object, a distinctive silhouette is produced.
Spread lighting - Hiding lights in low-lying landscaping and ground cover causes the lighting to “spread” which emphasizes the textures and patterns of the plants.
NiteLites is offering a free demonstration for your property. See the results of a NiteLites system before you invest anything. A NiteLites professional will temporarily install a lighting system on your property. By taking advantage of the evening demonstration, you will see exactly how your home will be illuminated and accentuated. Work with a NiteLites designer to create a lighting application that reflects your personal tastes and fits your budget. NiteLites will also provide you with an accurate cost estimate for the finished installation. There are no surprises with the NiteLites lighting system.
NiteLites’ world headquarters, located in Franklin, Ohio, specializes in the manufacturing, design, installation, and lifetime maintenance of top-quality, low-voltage lighting for both residential and commercial applications. NiteLites’ proprietary line of copper and brass fixtures provide an inviting application of light on any project. NiteLites continually strives to elevate the standards of quality, safety, and professionalism in the outdoor lighting industry. NiteLites products and systems provide the latest cutting edge technology from their progressive manufacturers as well as a solid history of providing first rate service to every client.
For more information on a NiteLites franchise, please call 866-NITELITES. For more information on NiteLites Architectural and Landscape Lighting, visit their web site at www.nitelites.com. If you are interested in outdoor lighting and would like a free nighttime demonstration, contact Scott Biason and his staff at the 25th Home and Remodeling Show or call (314) 993-8155 in the St. Louis area.
For more information about the 25th Home and Remodeling Show, check out their website at http://www.stlhomeshow.com.
Posted by Industrial-Manufacturing at 01:24 AM | Comments (0)
David T. Biggs Named Honorary Member of National Civil Engineering Society
A Troy engineer will accept Honorary Membership to the American Society of Civil Engineers.
(PRWEB) October 12, 2005 -- Ryan-Biggs Associates, P.C., a consulting firm specializing in structural engineering, announced today that David Biggs, Principal, was named an Honorary Member of the American Society of Civil Engineers (ASCE). Aside from being elected President of ASCE, honorary membership is the highest status a member can achieve. Honorary Membership is comprised of only 183 members worldwide. Founded in 1852, the American Society of Civil Engineers represents more than 137,000 civil engineers worldwide and is the oldest national engineering society.
Biggs is recognized for his advancement of structural masonry engineering through innovative design and restoration, code development, and his willingness to share his knowledge through service and contributions to the public. He has also made considerable contributions to codes, standards, and guidelines in the area of masonry design and construction.
Biggs has over 30 years of experience as a structural engineer in private practice. He holds civil engineering degrees from Rensselaer Polytechnic Institute and has taught as an adjunct professor. He has served as national director of the American Society of Civil Engineers and currently serves on the committee to develop standards for masonry construction in the United States. He was also a member of the Building Performance Assessment Team that investigated the collapse of the World Trade Center. Mr. Biggs has authored numerous papers focusing on masonry design and restoration and is a frequent lecturer at universities, professional seminars, and conferences in the United States and overseas. He is a registered professional engineer in New York, Vermont, New Hampshire, Maryland, Massachusetts, Michigan, Ohio, and Kentucky.
He will be honored on October 28, 2005, at ASCE’s annual Civil Engineering Conference in Los Angeles, California.
About Ryan-Biggs Associates, P.C.
Ryan-Biggs Associates, P.C., is a consulting engineering firm specializing in structural engineering. Since 1973, they have been providing design services from their main office in Troy, New York, and branch offices in Skaneateles, New York, and West Chester, Pennsylvania.
Posted by Industrial-Manufacturing at 01:22 AM | Comments (0)
October 11, 2005
Avatar Financial Group Closes $18.85 Million Bridge Loan in Under Three Weeks
Hard money lender specializing in commercial real estate loans saves buyer’s $1.5 million earnest money.
SEATTLE, WA (PRWEB) October 11, 2005 -- Avatar Financial Group, a private hard money lender specializing in commercial real estate loans, today announced it has completed a three-year $18.85 million bridge loan for the purchase of the Pelican Apartments, an 379 unit apartment complex located in St. Petersburg, FL.
On schedule to complete the purchase with a conventional lender, the borrower, APD Custom Homes of Alpharetta, GA., was shocked at the eleventh hour to hear the lender wanted new and additional collateral in the form of another project the borrower had underway in Panama City, FL.
With the contract to purchase already signed, and financing now dropping out at the last moment, APD’s broker turned to Avatar Financial Group to fund the commercial property loan before the opportunity and $1.5 million in earnest money was lost altogether.
Avatar Financial Group approved the commercial real estate bridge loan for the acquisition of the property with a loan to value ratio of 65% percent in a first lien position.
TR Hazelrigg, President of Avatar Financial Group discussed the project. “Banks simply cannot fund commercial real estate loans of this size – or any commercial property loan for that matter – in two to three weeks," he remarked. "Avatar Financial Group jumped into this difficult situation and made it happen. We made sure our client didn’t lose his $1.5 million earnest money because of a last minute demand by the conventional lender."
Hazelrigg noted that the time constraint for funding was fairly common for Avatar’s clients. "We fund mortgage bridge loans on a timeframe that banks can’t match," he said. "And, since Avatar doesn’t charge a pre-payment penalty, APD will be able to refinance as soon as they are ready.”
The property sits on 31.9 acres of beautifully landscaped land with lakes and water features located at 10200 Gandy Way in Saint Petersburg, an excellent location for residential properties.
With the property now purchased, long term plans include conversion to condominiums. In the immediate future, the client will refinance the property with another bank. Avatar’s bridge loan made that possible.
ABOUT AVATAR FINANCIAL GROUP
Based in Seattle, WA, Avatar Financial Group is a private hard money lender that provides commercial real estate loans in as little as two weeks. Avatar Financial Group specializes in mortgage bridge loans for income producing commercial, industrial, and investment residential properties nationwide, ranging from $1 million to $15 million and above. For more information, visit http://www.avatarfinancial.com.
Posted by Industrial-Manufacturing at 11:28 PM | Comments (0)
Roscoe Moss Company Joins StormwaterAuthority.org
Roscoe Moss Company, a leading manufacturer of water well casings and screens, recently joined StormwaterAuthority as a Thunder Affiliate.
Wilmot, NH (PRWEB) October 10, 2005 -- StormwaterAuthority, LLC, a multi-partnered website designed to assist both the private and public sectors in making informed decisions about stormwater treatment and management, announced Roscoe Moss Company as a Thunder Affiliate of the company.
Based in Los Angeles, California, Roscoe Moss Company has maintained a history of developing groundwater and providing high quality water production, treatment and transmission products with a strong commitment to http://www.stormwaterauthority.org[clean waterthroughout the U.S. “Roscoe Moss Company is proud to be a StormwaterAuthority Thunder Affiliate. We are eager to share our experience with other stormwater professionals seeking to find solutions to http://www.stormwaterauthority.org[stormwater related issues. The StormwaterAuthority site, along with the collective expertise of its associates, will greatly assist this industry in improving stormwater quality throughout the world,” said Kevin McGillicuddy, Director of the Stormwater Treatment Division.
Roscoe Moss Company manufactures a number of products, including Storm Flo™ Screen linear radial solids removal device and inclined wedge-wire panel screens for stormwater treatment. Other products include screens for industrial filters, groundwater production and monitoring casings and screens, and water transmission pipe.
“Companies like Roscoe Moss Company are committed to clean water. StormwaterAuthority shares in this commitment as we work together to continue our efforts of providing a comprehensive resource for the stormwater industry” said Lisa Begin,
General Manager of StormwaterAuthority.org.
For more information about Roscoe Moss Company and StormwaterAuthority visit www.stormwaterauthority.org
About StormwaterAuthority, LLC
StormwaterAuthority, LLC is a company committed to clean water through the support and sharing of knowledge through its website. The company offers a place where specifying engineers, contractors, developers, site owners and regulators can learn and share information, research best management practices and regulations, and find the latest news on stormwater management and treatment. StormwaterAuthority works to create a community to assist professionals in implementing the best plan, reducing short and long-term costs, and making informed business and environmental decisions.
For more information about StormwaterAuthority visit http://www.stormwaterauthority.org or call 1-800-729-0604.
Posted by Industrial-Manufacturing at 11:27 PM | Comments (0)
CADopia Announces the Release of CADopia 6
Most comprehensive update of CADopia software is now available for purchase.
San Diego, CA (PRWEB via PR Web Direct) October 11, 2005 -- CADopia, a leading developer and distributor of products based on the OpenDesign and IntelliCAD technology, announced that CADopia 6 is now shipping.
“CADopia 6, previously known as CADopia IntelliCAD, incorporates a number of exciting new features such as support for Adobe Acrobat PDF output and viewing of Microstation DGN and ESRI SHP files, while providing a stable, high performance CAD design, drafting, and detailing solution for engineers and architects,” said Surya Sarda, President and CEO of CADopia. “CADopia 6 also supports opening and saving of most Autodesk AutoCAD drawing files up to version 2006, using the DwgDirect technology.”
“I am impressed by the level of compatibility of CADopia software with AutoCAD,” said John Loacker, President of Kroll Maps, Seattle, USA. “CADopia has been working closely with us to ensure that the CADopia solution meets our needs.”
The new and improved features in CADopia 6 Professional Edition include:
• New! Export your drawings as Adobe Acrobat PDF files
• Open Autodesk AutoCAD files up to version 2006
• New! Sweep and loft solids using ACIS solid modeling technology
• New! Export and import DWF (Drawing Web Format) files for viewing on the web
• Enhanced! Raster Image Support with support for over 100 file formats such as BMP, TIF, GIF, JPG, CALS.
• New! View ESRI (SHP) and Microstation (DGN) files as images
• Enhanced print style tables
• New! External References Manager
• Enhanced Entity Snaps with extend and projected intersection options
• Enhanced FlexLM Network License Manager with optional floating licenses
• More customization options
• Enhanced command bar feature
• Performance enhancements
• General functionality improvements
To learn more about the new and updated features, please visit http://www.cadopia.com/about_us/news/cadopia6_released.asp
CADopia 6 is available in 3 editions – Standard, Premium, and Professional. A floating network license option is available for volume license users. Educational versions of the products are available at substantial discounts for accredited educational institutions.
CADopia OEM is available to CAD application developers as a platform technology for their niche CAD applications, allowing them to leverage the functionality that is already available in CADopia 6.
CADopia 6 Professional Edition also includes Columbus Document Management software and Ralph Grabowski’s CADopia Customization Guide and Inside CADopia 6 books.
To download an evaluation copy of CADopia 6 Standard Edition or to request an evaluation CD, visit www.cadopia.com. CADopia customers may upgrade to the new version by contacting sales @ cadopia.com.
About CADopia
CADopia (www.cadopia.com) is creating the industry standard for an affordable and powerful CAD solution. With a network of strategic ISV partners, distributors and resellers, and a user base spanning over 80 countries across the globe, CADopia is one of the world's most popular providers of professional CAD software. Founded in 1999 in San Diego, CADopia is a privately held California Corporation. For more details, please visit CADopia’s web site at www.cadopia.com .
CADopia and the CADopia logo are the trademarks of CADopia Inc. All other trademarks, trade names, or company names referenced herein are used for identification only and are the property of their respective owners.
Contact:
Ken Feitz
Strategic Reach PR
303.487.7406
www.strategicreachpr.com
Posted by Industrial-Manufacturing at 11:26 PM | Comments (0)
The Grand Opening of the Spa at Mohonk Mountain House, New York, USA: A Review by Spa Index: Guide to Day Spas and Stay Spas™
Mohonk Mountain House has created something marvelous on its mountaintop in New York, in a way that makes it look and feel as if it has always been there. Mohonk Mountain House quietly evolved this summer -- you'll see the same canvas of trees and gardens, the same grand silhouette on the mountain, the same sturdy grace in the beams and timbers that have welcomed visitors for over 130 years -- they are simply, and suddenly, better.
(PRWEB) October 11, 2005 -- Spa Index: Guide to Day Spas and Stay Spas™, a prominent online spa directory and spa industry resource, toured one of the United States most-respected historic vacation destinations this Labor Day, September 2005, for the grand opening of a remarkable spa, the environmentally conscious Spa at Mohonk Mountain House.
A distinguished favorite among America's resorts for more than 100 years, the Hudson Valley's Mohonk Mountain House offers a world class hotel, fine dining on the American Plan, access to 85 miles of hiking trails, tennis, golf, indoor and lake swimming, boating, ice skating, cross-country skiing, snowshoeing, children's programs, horseback riding, carriage rides, and now -- the Spa at Mohonk Mountain House -- an eco-friendly facility which completes the resort's setting as an ultimate destination for individuals, families, couples, corporate groups, and now, the spa and wellness traveler.
"Mohonk Mountain House is a National Historic Landmark and once you step out of your car and look at the front of the property, you instantly know you are enveloped in history. Built 1869, this 261-room castle is not only one of America's oldest family-owned resorts, it certainly is the last of the great 19th century mountain resorts" said Kevin McClain, the founder and co-director of Spa Index Media. "Far from being 'dated' however, I found the resort has grown and merged into its surroundings without overwhelming the natural beauty. It has managed to remain an impressive resort, in an impressive structure, on even more impressive grounds, but hasn't taken a misstep by scarring its beautiful backdrop or historic construction. To the contrary, it has merged its newest building -- the Spa at Mohonk Mountain House -- in the most ecologically responsible and beautifully constructed manner possible. Mohonk is clearly a willing environmental steward of its own mountain."
How do you know you have created an architectural success in a treasured historic setting? When you are able to build a new 30,000 square foot, 3 level wing which returning guests would be hard pressed to distinguish from the historic buildings. The Spa wing is environmentally friendly in its use of a geothermal heating and cooling system, as well as recycled and recyclable materials. Geothermal systems use the constant temperature of the earth to heat and cool with remarkable efficiency; this type of system is very quiet and produces no on-site emissions.
A green sod roof was placed on one section of the building to create natural insulation, also allowing the building to blend with its surroundings. The green roof has an 8-inch deep planting bed in which native plants are cultivated. The green roof cuts summer cooling costs, filters the air, provides acoustical insulation, reduces rain run-off, and supplies green habitat for birds and butterflies. The roof is also used for relaxation, mediation, and yoga.
"So expertly crafted is the building, geothermal system, and green roof, when inside the spa wing you simply don't hear anything except the quiet hush of the earth" added McClain.
The owners and architects took further advantage of the natural setting by providing more than 200 windows in the spa wing, and every creature comfort, including wonderful relaxation verandahs, solariums, sitting rooms, and mineral pools, all designed to soak in the unparalleled vistas.
The Spa at Mohonk Mountain House is directed by Hollis Beckwith, who brings more than 25 years of industry experience to the property. Hollis formerly served as Spa Director at the Spa at the Herrington (Geneva, Illinois), the Apuane Spa at the Four Seasons Resort in Punta Mita, Mexico, and the Pangkor Laut and Tanjong Jara Spas in Malaysia. Hollis has a special interest in designing treatments based on indigenous materials, and has incorporated the natural beauty of the mountaintop into the Spa with signature treatments, artwork, and architectural elements.
"I had the signature 80 minute 'Mohonk Red Massage.' This signature treatment included relaxation breathing techniques, warmed body and bath oil with a proprietary 'Mohonk Red' witch hazel on the skin and infused in towels cocooned my face and feet. A combination of acupressure, Swedish massage, Hawaiian Lomi-Lomi massage, and traditional Thai stretches were all used, concluding with a face spritz and a guided 'power nap'" said McClain. "The Mohonk Red Massage was the best I've had in a spa environment to date -- which covers seven years touring spa facilities. It wasn't an 80 minute massage, it was a demonstration of the very definition of wellness, at the hands of an expert."
To read a detailed review about McClain's experiences at the Mohonk Mountain House, including a photo gallery, visit the website for SpaIndex.Com: Guide to Day Spas and Stay Spas and tour the Mohonk Mountain House Featured Spa Presentation (http://www.SpaIndex.com).
About Mohonk Mountain House
The 261-room Mohonk Mountain House in New Paltz, New York, USA, offers its guests elegant accommodations, a formal and elegant dining room, casual and family restaurants, the full-service spa and salon, lake and heated swimming, tennis courts, golf, fishing, hiking, family activities, classes and seminars, a skating pavilion, and outstanding botanical gardens. Mohonk guests enjoy an "American Plan" with three meals and afternoon tea included in the daily accommodation rates. The extensive activities programs are also included. Mohonk Mountain House is a convenient 90-minute trip from Manhattan. The resort is located six miles west of the New York State Thruway near New Paltz, New York and is easily accessible by auto, train, bus, or air. Visit SpaIndex.com for the complete review, or visit Mohonk online at http://www.thayerinteractive.com/clickthru/clickthrough.rry/40142.
About Spa Index Media, LLC
Spa Index Media LLC is based in the San Francisco Bay Area of California, USA, and operates three websites for the international spa, salon and wellness industry. SpaIndex.Com is a comprehensive guide to day spas and spa resorts in 39 countries, and profiles spa specials, cuisine, and lifestyle tips (http://www.SpaIndex.Com). SpaWire.Com is a complimentary news digest and vendor resource site for the spa professional community (http://www.SpaWire.Com). SpaFlyer.Com is an RSS Blog for spa enthusiasts to take advantage of last-minute spa specials, deals, and promotions (http://www.SpaFlyer.Com). Kevin McClain is the founder and co-director of Spa Index Media. . He regularly tours and reviews spa resorts and destination spas for SpaIndex.Com, while additional executive staff tour and review day spas and urban hotel spas. Spa Index Media is a member of the International Spa Association (ISPA).
Posted by Industrial-Manufacturing at 11:25 PM | Comments (0)
Commercial Real Estate Lender - Pacific Security Capital - Provides $8.3 Million Industrial Property Loan
Pacific Security Capital, a leading commercial real estate lender and provider of structured finance, equity financing and investment sales, provides an $8.3 Million industrial property loan to Portland property developer.
Beaverton, OR (PRWEB) October 11, 2005 –- http://www.pacificsecuritycapital.com – Pacific Security Capital (“PSC”), a leading commercial real estate lender, announced today that it has provided an $8.3 Million industrial property loan to a local Portland-area property developer.
The loan was collateralized by a 200,000 square foot industrial property with an office component. The building is occupied by a single non credit tenant.
“The owner was able to negotiate a lease extension which allowed them to lock down today’s low interest rates and pull some equity out of the transaction,” said Michael Wenzlick, Senior Managing Director, Pacific Security Capital. “Even though the tenant was not investment grade we were able to provide long term non recourse financing for the borrower.”
“Concurrent with the loan closing, Pacific Security Capital coordinated the defeasance of the existing loan,” said Wenzlick, “which is a form of loan prepayment that is being seen more and more in the commercial real estate financing world today.”
Defeasance is a prepayment provision that is increasingly being used by commercial real estate lenders to substitute collateral and increase the predictability of payment streams, meaning that the lender can offer the borrower a lower interest rate.
Pacific Security Capital closed the loan at the end of September and provided a ten year fixed interest rate of approximately 5.3%.
To learn more about commercial loans from Pacific Security Capital or its preferred client program, PacificEliteTM please visit www.PacificSecurityCapital.com or call 1-800-844-6085.
About Pacific Security Capital
Pacific Security Capital is a leading commercial real estate lender providing commercial loans, structured finance, investment sales, equity financing and advisory services. The combination of direct lending, advisory, intermediary, corporate and professional services, syndication, investment sales and development services consistently allow PSC to rank among the leaders in the industry. PSC is headquartered in Beaverton, Oregon with other offices in major markets in North America and Europe. More information about the company can be found at www.PacificSecurityCapital.com.
Posted by Industrial-Manufacturing at 11:24 PM | Comments (0)
Gaslight Landing Developers Begin Construction in Virginia’s Historic Downtown Occoquan
Luxury townhomes in historic Occoquan Virginia will feature riverfront and townside units with river views, boat docks and elevators
Occoquan, VA (PRWEB) October 11, 2005 -- Mark Granville-Smith and Bob Hagel announced today that demolition and site clearing of the Gaslight Landing development on the site of the former Prince William Marina on Mill Street site has been completed and construction will begin soon. Granville-Smith and Hagel are the developers of Gaslight Landing’s 20 luxury townhomes, which will be built on the waterfront property between the Occoquan Inn and Mamie Davis Park. The homes are expected to be completed in summer/fall of 2006.
“We’re excited about starting the construction of Gaslight Landing, which will complement the town’s historic downtown area,” said Granville-Smith, chairman of the board and chief operating officer of Classic Concept Builders and a partner in the project. “Two groups of five homes will face Mill Street, and two groups of five homes will face the Occoquan River. Because of the buildings’ unique design, all units will have river views.”
“The townhomes add a new residential dimension to the downtown area, and the planned boat docks for each unit will allow home owners to moor their boats just a few steps away,” said Hagel. “We are also extending the town’s new Riverwalk along the river on the Gaslight Landing property.
“Each home has a 3-level living area, an elevator, and a parking area for three cars beneath each home,” Hagel said. “The town houses will have approximately 2,600 to 2,800 square feet of heated living area with 9-foot ceilings on the first floor and a total more than 3,600 square feet of covered area when you include the parking level and balconies."
In an effort to maintain historic accuracy, Hagel and Granville-Smith worked with architectural consultant Robert Schweitzer, an author and professor of historic architecture and colors at the University of Michigan, who reviewed the exterior designs, then selected exterior colors and roofing patterns. This effort contributed to the approval of the project by the Town of Occoquan and the Occoquan Architectural Review Board.
An artist’s rendering of the development, front and rear elevations, and floor plans is available at www.gaslightlanding.com Individuals interested in purchasing a unit should go to the Gaslight Landing web site to register. Pricing will be available within 60 days, and sales will begin at that time.
About Classic Concept Builders
Classic Concept Builders, Inc., has been building custom homes in Prince William County for 15 years. Classic has won numerous Finest for Family Living awards for design and construction quality. Classic was named Builder of the Year in 2003 by the Prince William Chapter of the Northern Virginia Building Industry Association (NVBIA) as well as Builder of the year in 2004 by the Regional NVBIA. Classic Concept Builders also develops its own land for its housing communities and received an award from the Prince William Conservation Alliance in 2004 for “Environmentally Friendly Development Practices.” Mark Granville-Smith, CEO of Classic Concept Builders, is the acting president of the Prince William Chapter of the NVBIA.
Posted by Industrial-Manufacturing at 11:24 PM | Comments (0)
nParallel Creates a Complete, Modular Point-of-Sale System for Hearth & Home Technologies
Versatile Solution Offers Flexible Product Presentation Options for Retailers
MINNEAPOLIS (PRWEB) October 11, 2005 – With its distinctive brands presenting an extensive selection of gas, electric, and wood burning fireplaces, stoves, grills, mantels and more, Hearth & Home Technologies (www.hearthnhome.com) is the world’s largest manufacturer of fireplaces and hearth products. In 2004, nParallel, the brand communication, merchandising strategy and display company, crafted an imaginative trade show pavilion that integrates brand communication for Hearth & Home. When it came time to develop a comprehensive point-of-sale system for its Heat & Glo™ and Quadra-Fire® brands, Hearth & Home again turned to the creative pros at nParallel.
“We envisioned a solution that would promote awareness of our product brands and help dealers boost sales of individual product lines,” said Alan Trusler, senior vice president, retail channel, Hearth & Home. “Since every dealer’s showroom is different, we had to have a flexible system. nParallel delivered a brilliant and cost-effective solution.”
“The modular system we designed has 40 individual elements – featuring window cling signs, exterior and interior banners, design center kiosks, several types of fixtures (including wall flag and wall mounted options), and small and large light boxes,” said Shawn King, creative director, nParallel.
nParallel defined retail fixture and signage packages designed to maximize the impact on customers during store visits. “The solution can be tailored to the showroom environments of individual Hearth & Home dealers,” said Megan Diamond, president, nParallel. “The various packages offer unique combinations of elements with different, and affordable, price points for retailers.”
Hearth & Home began the roll-out of the point-of-sale system in June 2005. More than 90 orders have been submitted to date, and some 200 dealers are expected to deploy the system by the end of 2005. “We’re confident this new point-of-sale system will enhance the retail experience for consumers and help drive the sales process,” said Trusler. “We look forward to rolling it out to more dealers in 2006.”
About Hearth & Home Technologies
Hearth & Home Technologies is the world’s largest fireplace manufacturer and a leading provider of hearth products for the home. The Hearth & Home Technologies family includes Heat & Glo™, Heatilator® and Quadra-Fire® brand hearth products and Fireside Hearth & Home™ retail stores. Hearth & Home Technologies is a subsidiary of HNI Corporation (NYSE: HNI), the second largest office furniture manufacturer in the United States. More information can be found at www.hearthnhome.com.
About nParallel
Brand marketers and retailers know that store designs, merchandising systems and trade show displays establish the brand experience, engage customers and drive sales – if they are planned with imagination, then skillfully crafted. But, too often, unfocused planning, uneven execution and unexpected costs squeeze the creative spark out of their most promising concepts. The alternative? nParallel (www.nparallel.com), the international brand communication, merchandising strategy and display agency. Whether the venue for your moment of truth with your customers is a store or a show, nParallel fulfills the big-picture vision while keeping a sharp eye focused on the details of disciplined production, meticulous program management, and the budget bottom line. Seeking uncompromised excellence in brand communication? Call nParallel, 763.231.4800.
Posted by Industrial-Manufacturing at 11:23 PM | Comments (0)
Small Businesses in Need of More Affordable Merchant Accounts, Costs to Accept Credit Cards Too High
Several small businesses are searching for options when it comes to accepting credit cards. Most merchant accounts are too costly for a smaller business to justify the cost of having one.
(PRWEB) October 8, 2005 -- Erin is the director of education at the Wisconsin Institute of Permanent Cosmetics, which until recently was unable to find a cost-effective merchant account to accept credit cards from clients and students.
“Business phone lines are very expensive and being a small business I don't want to pay for a business line just to use credit card service”, says Erin, “and all my business calls I take on my cell phone”.
This is a real problem for a lot of businesses that truly need a merchant service, but can’t justify the costs of the account itself, along with the additional and indirect costs that often come with it. Many services require a second line, a terminal rental, and so on.
This sort of problem especially relates to small construction businesses, photographers and similarly small, mobile business types.
Erin, however, has found a unique solution to her merchant account dilemma. It’s called “Accept-by-Phone”, and it’s a unique merchant service that provides a sort of “loophole” in the merchant industry for companies like Erin’s.
“I am thrilled with accept-by-phone… The best attribute about this service is it gives me the ability to accept credit cards without having a phone line for a credit card machine”, Erin says. Now she can use either a regular phone line or her cell phone to process credit cards easily.
Other similar businesses have also found Accept-by-Phone to solve this problem, because of its strangely low rates and unique operating service. The account itself has no limits or transaction fees, which is unheard of in the merchant industry. Business owners only pay $5 a month and a discount rate.
“I don't need to lease a terminal and sign into an extensive contract”, says Bill, CEO of Coastal Travel Vacations Worldwide. He goes on, “Most importantly, [I can’t get over] the significantly low cost of operation and start up.”
In an industry that is generally known to draw profits from every possible angle, it is refreshing for many businesses to see this sort of service arise. Perhaps Accept-by-Phone will start a favorable trend within the merchant industry that is more favorable towards the “little guy”.
Small businesses interested in this service should go to http://www.accept-by-phone.com and sign up for an application, which only costs them if they are approved.
Posted by Industrial-Manufacturing at 11:22 PM | Comments (0)
FlowSense Received Multiple Orders from Kellogg Brown & Root (KBR), U.S. Air Force, Bureau of Reclamation (Department of Interior), and U.S. Fish & Wildlife Service
FlowSense announced today that its environmental and industrial team have received multiple orders for several mission critical process moisture monitoring systems and pressure instruments. Additionally, FlowSense announced that it has been awarded a turnkey contract from the Air Force for equipment supply and startup support of an enhanced walk-in (EWN) curing oven. FlowSense's industrial team also received a contract from the Bureau of Reclamation to supply process instruments for a desalting plant. Fish & Wildlife Service also awarded FlowSense for the installation and programming of a wireless communication system.
FlowSense LLC, Maple Grove, MN (PRWEB) October 11, 2005 -- FlowSense announced today that its environmental and industrial team have received multiple orders for several mission critical process moisture monitoring systems and pressure instruments. Additionally, FlowSense announced that it has been awarded a turnkey contract from the Air Force for equipment supply and startup support of an enhanced walk-in (EWN) curing oven. FlowSense's industrial team also received a contract from the Bureau of Reclamation to supply process instruments for a desalting plant. Fish & Wildlife Service also awarded FlowSense for the installation and programming of a wireless communication system.
For KBR, FlowSense will supply integrated, fully automatic self-calibration moisture analyzers for use in natural gas and hydrocarbon processing applications. Another award specified both custom and commercial off-the-shelf (COTS) pressure instruments as part of the Iraq infrastructure reconstruction program. KBR provides a wide range of engineering, construction, operations and maintenance, logistics and project management services to three markets: upstream, downstream, and government & infrastructure.
For the U.S. Air Force, The contract specified a custom electrically heated enhanced walk-in series industrial oven with installation at Wright-Patterson AFB, Ohio.
For the the Bureau of Reclamation, FlowSense will provide level monitoring systems for the measurement and control of 12 gravity filter tanks. The level monitoring systems are comprised of Honeywell ST 3000 Smart Transmitters which provide proven technology for differential and gauge pressure measurement.
For the U.S. Fish & Wildlife Service, FlowSense will provide installation and programming of communication equipment to be located on a 220 feet communication tower under construction at Rice Lake National Wildlife Refuge. FlowSense's scope of work in this project will include all necessary equipment, supplies, materials, and supervision for the installation and programming of Motorola's communication system.
FlowSense LLC is an award-winning veteran owned small business (VOSB) and 8(a)/SDB certified company providing integrated technical solutions in environmental systems (air and water quality management), security technology (biometric access control), and industrial solutions (facilities contracting). FlowSense products and services include engineering, project management, and procurement serving diverse industries including private and public sectors, military, defense, and government agencies.
Posted by Industrial-Manufacturing at 11:20 PM | Comments (0)
Improving Communication This Week on Family Business Doctor with BusinessWeek Online’s Rod Kurtz
This week, Host Fred Hathaway and Family Business Doctor Wayne Rivers, discuss Improving Communication with guest Rod Kurtz, Small Business Editor of BusinessWeek Online. Family Business Doctor will air on the business channel of Voice America Network (Voiceamerica.com) Thursday October 13, 2005 at 2:00pm EST.
Raleigh, NC (PRWEB) October 11, 2005 -- This week, Host Fred Hathaway and Family Business Doctor Wayne Rivers, discuss Improving Communication with guest Rod Kurtz, Small Business Editor of BusinessWeek Online. Family Business Doctor will air on the business channel of Voice America Network (Voiceamerica.com) Thursday October 13, 2005 at 2:00pm EST. Psychologist Dr. Michael Lyons will also join the show to discuss the psychology of improving communication.
Effective communication is crucial to the success of any business. Communicating well in a family business can present additional challenges. This episode of Family Business Doctor will help you learn how to improve communication in your family business. Access to the Family Business Doctor program is free and can be downloaded from the Voiceamerica.com website after the broadcast. The show runs weekly on Voiceamerica.com Thursdays at 2:00pm EST.
Wayne Rivers is the President of the Family Business Institute and author of You Don’t Have to Die To Win and Prescriptions for a Healthy Family Business. The Family Business Institute specializes in helping family and closely held businesses maximize their success. For more information on Family Business Doctor, contact Fred G. Hathaway at 1-877-326-2493 or visit the company website, www.Familybusinessinstitute.com.
Contact:
Fred G. Hathaway
1-877-326-2493 Ext 13 or
(919) 783-1880 Ext 13 or
(919) 270-9491
e-mail protected from spam bots
Posted by Industrial-Manufacturing at 11:19 PM | Comments (0)
Dallas Contracting Co., Inc. Completes Building Demolition & Foundation Removals
South Plainfield, New Jersey Dallas Contracting Co., Inc., (website: http://www.dallascontracting.com) a specialized contractor providing demolition, onsite concrete aggregate crushing, equipment salvage and scrap metal recycling to various industries, recently completed the demolition of a building and other related activities on an active chemical site in New Jersey.
South Plainfield, New Jersey (PRWEB) October 11, 2005 -- Dallas Contracting Co., Inc. (Dallas Contracting) was contracted to perform several tasks including the demolition of a former maintenance building, demolition of all associated foundations, removal of surrounding asphalt area and removal of piping on a pipe bridge. The demolition of these items was complicated by being on an active chemical site with live utility (above and below grade) and process lines in the immediate vicinity of work efforts. The plant has very strict work practices which needed to be abided by at all times.
The first task was to remove the old utility and water lines on a pipe bridge that fed to the building. This was accomplished by having laborers on a Genie boom lift cut the lines down with demolition saws. The building and foundation demolition was the next task. A PC 220 excavator mounted with a grapple demolished the structure and a skid steer was utilized to sort and remove debris. The grapple on the excavator was replaced with a bucket to perform the foundation and asphalt removal. A hydraulic hammer attachment was mounted on the skid steer to assist with breaking up the concrete. In addition, laborers utilized a walk behind concrete saw to make cuts in the asphalt and concrete. During the foundation removal, several unknown old sewer and water lines were encountered which were carefully exhumed and removed. Concrete, brick, masonry and asphalt were sent offsite for recycling. Debris was sent off for non hazardous disposal.
From a safety standpoint, nearby underground utilities were marked out and steel plates were placed over the areas for protection. A water hose was utilized to suppress dust migration during the building demolition. Caution tape and fencing were also used to secure the work area. There were no injuries or incidents.
The project was completed in approximately 2 ½ weeks.
Dallas Contracting Co., Inc. is an expert in demolition and equipment salvage. Additional information on our services can be obtained at our website http://www.dallascontracting.com/
About Dallas Contracting Co., Inc.
Dallas Contracting Co., Inc. has been in business for 26 years, is financially sound (D&B Rating of 3A2), is bondable, and works on a nationwide basis. Dallas Contracting Co., Inc. offers a turnkey approach to demolition, concrete recycling and remediation projects by offering the following services under one roof:
Demolition, Onsite Concrete Aggregate Crushing and Recycling, Environmental Remediation, Rigging, Brownfield Redevelopment, Surplus and Used Equipment Sales, Interior Demolition, Equipment Removals, Dismantlement, Equipment Salvage and Scrap Metal Recycling.
Dallas Contracting Co. Inc. sells used and surplus equipment and inventory at their storefront on EBAY (http://stores.ebay.com/Dallas-Contracting?refid=store).
Contact:
Dallas Contracting Co., Inc.
1260 New Market Avenue
South Plainfield, New Jersey 07080
P: (908) 668-0600
F: (908) 668-0601
Contact: Damon Kozul, PE, CHMM
Email: e-mail protected from spam bots
Website http://www.dallascontracting.com
Posted by Industrial-Manufacturing at 11:18 PM | Comments (0)
Portaloo on the Move
Portaloo, the UK’s leading supplier of portable restroom facilities, is on the move to bigger and better premises, doubling its number of employees on the way.
(PRWEB) October 11, 2005 -- The move for the company’s Midlands Region Hire Centre is thanks to its huge success in providing quality toilet and shower blocks to organisations in a range of sectors across the UK.
The two-acre purpose-built site at Foundry Lane in Smethwick, West Midlands will enable the company to keep a greater quantity of buildings on site, allowing customers to see first-hand the growing number of Portaloo products available, and further improve the speed in which they can be delivered to customers.
Ben Coupar, Midlands Region Hire Manager for Portaloo, said: “We’ve always provided an extremely high quality, speedy service to our customers, but moving to bigger premises will allow us to respond to requests even more quickly through an expanded team and having a greater number of units on site.
“The business has grown by over 65% during the last couple of years and we have seen more and more organisations in an increasing variety of sectors recognising the benefits of providing the highest quality rest facilities at all times.”
Portaloo, a subsidiary of Portakabin, provides a range of quality restroom facilities, whether it be toilets, washrooms or showers, or a combination of all three. The buildings provided are delivered and installed by highly experienced professionals, with a dedicated team on-hand at all times to provide advice or solve any problems should they arise.
Ben continued: “Many people think of portable toilets as being the plastic single toilet units you see at events such as concerts. This is simply not the case at Portaloo. All Portaloo toilet blocks feature full-flushing amenities, with easy-clean fittings, surfaces and floors, as well as high quality sinks, taps and fixtures. The internal specifications provide high levels of comfort, with air fresheners and soap dispensers, among many other features, providing maximum hygiene.”
As part of the company’s commitment to customer service excellence, and to provide complete peace of mind to customers, Portaloo provides free site surveys to assess customers’ needs, returns quotations within 24 hours and delivers products on time and on budget.
For further information on the products and services available from Portaloo contact 0845 200 5555 or visit www.portaloo.co.uk.
Posted by Industrial-Manufacturing at 11:17 PM | Comments (0)
October 10, 2005
Design News Announces Ground-Breaking Online Motion Control and Automation Conference 2005, Sponsored by National Instruments, Galil and Aerotech
Design News announces the Ground-Breaking Online Motion Control and Automation Conference 2005, Live October 11-12, 2005. The event is sponsored by National Instruments, International Rectifier, Aerotech, Galil Motion Control, Parker Hannifin Electromechanical Automation Division and Banner Engineering.
NEW YORK, NY (PRWEB) October 10, 2005 -- Design News, the leading publication covering the latest tools, components, and materials used in mechanical and electromechanical design of a broad range of products, announces the Ground-Breaking Online Motion Control and Automation Conference 2005, Live October 11-12, 2005. The event is organized by Design News and sponsored by National Instruments, International Rectifier, Aerotech, Galil Motion Control, Parker Hannifin Electromechanical Automation Division and Banner Engineering.
The online conference offers a compelling multi-session conference program with leading industry experts. Visitors are able to attend straight from the comfort of their home or office. Topics to be covered:
- Amplifiers & Drives
- Controllers
- Feedback Devices
- Automation
- Mechanical components
- Motors
The Online Motion Control and Automation Conference is an online educational event designed for engineers who want to learn about new motion control and automation strategies, from the engineers who are using them. The conference agenda will deliver content-rich sessions and case studies addressing the relevant topics. Presenters include Dr. Eric Baumgartner, NASA JPL senior engineer that will be lecturing about: "The Mars Exploration Rover Instrument Positioning System."
This free online event comprised of multiple webcasts. Leading industry experts and solution providers offer attendees a unique opportunity to participate straight from the comfort of their home or office.
Webcast topics include:
- Tuning Servo Systems - Classical and Advanced Methods
- Optimal Component Selection for High-Performance Motion Control
- Where Are You on the Evolutionary Scale of Motion Control?
- How to Slash Design Time with Simulation Tools
- Demystifying Vision Sensing
- Addressing More Efficient Motors
More information about the event and free registration:
http://www.designnews.com/e2emotion
About the sponsors:
Aerotech
Aerotech has designed and manufactured the highest performance motion control and positioning systems for our customers in industry, government, science and research institutions around the world.
Banner Engineering
Banner offers complete and integrated line of sensing and machine safety products, from Photoelectric Sensors to Machine Safety Products, Vision Sensors, and Precision Measurement and Inspection Products.
Galil Motion Control
Galil Motion Control, Inc. specializes in providing microprocessor-based motion controllers for the purpose of controlling motors with utmost precision.
International Rectifier (IR)
International Rectifier (NYSE:IRF) engages in the design, manufacture, and marketing of power management products. Its products include analog integrated circuits and advanced circuit devices, power systems, and power components.
National Instruments
National Instruments (Nasdaq:NATI) is a technology pioneer and leader in virtual instrumentation. Leveraging PCs and commercial technologies, virtual instrumentation increases productivity and lowers costs for test, control and design applications through easy-to-integrate software, such as NI LabVIEW, and modular measurement and control hardware for PXI, PCI, USB and Ethernet.
Parker Hannifin
Parker Hannifin (NYSE: PH) is the world's leading diversified manufacturer of motion and control technologies and systems, providing precision-engineered solutions for a wide variety of commercial, mobile, industrial and aerospace markets.
Posted by Industrial-Manufacturing at 11:45 PM | Comments (0)
National Association of Women in Construction Receives National Award for Magazine
NAWIC was awarded first place in the Small Firm, magazine category, for The NAWIC IMAGE, NAWIC’s bimonthly publication.
Ft. Worth, TX (PRWEB via PR Web Direct) October 10, 2005 -- The National Association of Women in Construction (NAWIC) recently won a national Marketing Communications Award. NAWIC was awarded first place in the Small Firm, magazine category, for The NAWIC IMAGE, NAWIC’s bimonthly publication. This national award was given by the Society of Marketing Professional Services (SMPS) at the SMPS Awards Gala held in New Orleans, La., on August 12, 2005.
Dede Hughes, Executive Vice President for the Association, is proud and honored to win the award. Ms. Hughes says, “It’s wonderful — the hard work has paid off. Professionalism is what our Association strives for, and it shows in The NAWIC IMAGE.”
Kara Roberson, editor of The NAWIC IMAGE, comments, “I believe this award will give the Association and the publication much deserved recognition. I am proud that through The Image the editorial staff has been able to showcase NAWIC and the construction industry in a positive manner.”
SMPS Marketing Communications Awards
The annual SMPS Marketing Communications Awards Program recognizes excellence in marketing communications by professional service firms in the design and building industry. Awards are presented in 18 categories. Open to both SMPS members and nonmembers, this program provides an unparalleled opportunity for firms to showcase their best marketing efforts each year.
The SMPS award highlights The NAWIC IMAGE as a professional publication, both in design and content.
The NAWIC IMAGE
The NAWIC IMAGE is an award-winning publication for members of the Association and other professionals in the construction industry. The magazine addresses industry issues, keeps readers informed of current and upcoming trends in construction, and promotes a healthy home and work lifestyle.
The magazine is mailed bi-monthly to members of the Association. Annual subscriptions are available for $50. To request a complimentary sample, please contact the NAWIC Office at (817) 877-5551 or go to www.nawic.org.
The NAWIC IMAGE Staff
Kara D. Roberson, editor, and Misty D. Overman, assistant editor, write, design and create the layout of the magazine. Members, guests and freelance writers also contribute articles.
About the Association
NAWIC is an international Association serving approximately 5,800 members in nearly 200 chapters across the United States. To learn more about NAWIC or The NAWIC IMAGE, contact Communications Director Kara Roberson at (817) 877-5551 or visit NAWIC Online at www.nawic.org. NAWIC’s Core Purpose is “To enhance the success of women in the construction industry.” NAWIC Builds — Your education, your career, your future. Build your life with NAWIC.
Posted by Industrial-Manufacturing at 11:45 PM | Comments (0)
Portakabin Portable Buildings: Getting to Grips with Access in the Leisure Sector
On 1 October 2004, the third and final part of the Disability Discrimination Act (DDA) came into force. This legislation has had a huge influence on the way services, such as leisure facilities, are provided in relation to people with disabilities and apply to both existing and new buildings.
(PRWEB) October 10, 2005 -- With an annual spending power of £50 billion, making sure that people with disabilities can fully access your buildings makes sound financial sense.
However, not all leisure service providers seem to appreciate this. Many companies still haven’t fully got to grips with the implications of the new regulations and the steps they need to take to ensure that their buildings are fully accessible for everyone, regardless of ability, both internally as well as externally.
The Disability Rights Commission works with disabled people, employers and service providers to achieve its vision of “a society where all disabled people can participate fully as equal citizens.” It was established in April 2000 by an Act of Parliament to stop discrimination and promote equality of opportunity for disabled people.
Its role includes ensuring that all organisations take the required steps to meet the new regulations set out in the DDA by closely monitoring the provision that is made available, and encouraging people with disabilities to exercise their rights by highlighting any instances where access is inadequate.
To help organisations in the leisure sector meet these requirements, Portaloo, a Portakabin subsidiary, has helped lead the modular building industry, and specifically the portable restroom sector, in interpreting and devising workable solutions to help meet the regulations.
John Smith, Portaloo Business Manager, said: “A popular misconception is that Part III of the Disability Discrimination Act covers only wheelchair access to premises. This isn’t the case, as it covers all forms of access to goods and services, including provision of access for the partially sighted and people with physical disabilities.
“Unlike the employment provisions of Part II of the DDA, there are no exemptions for service providers on the basis of their size. All types of businesses are now legally required to take positive steps to make all goods and services accessible to disabled people. Portaloo can provide building solutions that can help companies in the leisure sector provide the vital amenities that will help them to achieve this.”
Jake Fowler, Head of Building Control and Property Information at York City Council, who worked with Portakabin to devise workable access solutions, added: “The scope of this legislation is huge and we’ve had to standardise on many features. For example, doors should be wide enough to take a wheelchair, which is common sense really, but there have been no regulations previously.
“Unfortunately I think a lot of people will get caught out. Portakabin is the exception rather than the rule. We haven’t had many approaches from companies about what they need to be doing. They seem to have buried their heads in the sand.”
Kevan Halliday-Brown, Regional Manager of the Federation of Disability Sports Organisations (FDSO), supports this sentiment. He said: “Our mission is to encourage people with disabilities to get involved in sport and leisure activities so that they can explore their talents and abilities. We have an extensive programme of events that runs throughout the year, and while we have a good network of leisure facility providers that host the events for us, we are always looking to increase this.
“Access is obviously a key criteria for us when looking at the suitability of a particular venue, and we still regularly come across buildings that don’t provide adequate access despite the introduction of the final part of the DDA.”
Updating facilities to accommodate the regulations often requires refurbishment work to be done. However, the DDA requirements state that ease of access for all must be provided at all times, even during periods of refurbishment.
To help achieve this, Portaloo can provide disabled persons toilet and shower units, which allow organisations to provide high quality amenities for disabled people where they might not have previously existed. Typical features of the 9m² toilet unit include a single pedestal, allowing plenty of room for wheelchair manoeuvring, grab handles around the hand basin and pedestal, as well as a raised toilet seat for easy transfer from wheelchairs, and a low-level door threshold for easy access.
As a subsidiary of Portakabin, Portaloo is also able to provide entry ramps to ensure that all of an organisation’s buildings meet the regulations. Portakabin Access is one of the few organisations in Europe that provides ramps that meet all the requirements of the DDA on a short or long-term basis. The ramps are delivered, installed and removed by a dedicated team of access experts, which means the process is totally hassle-free for the customer.
John concluded: “We always strive to help our customers in every way possible. Ease of access for everyone is an important subject and I hope that all organisations across the country that aren’t meeting the needs of disabled people are doing everything they can to ensure they are very soon. If they don’t they will certainly find themselves under pressure to do so in the very near future.”
Any company requiring advice and guidance on providing access for people with disabilities can contact the Disability Rights Commission for further information or visit www.drc-gb.org.
For further information on the products and services available from Portaloo contact 0845 200 5555 or visit www.portaloo.co.uk
Posted by Industrial-Manufacturing at 11:44 PM | Comments (0)
Homebuilder K. Hovnanian Homes Awarded with Three STARS Awards from NCHBA
Raleigh homebuilder K. Hovnanian Homes continues to earn honors for its NewHome101 advertising campaign. The North Carolina Home Builders Association (NCHBA) recognized the company for several components of the campaign. NewHome101 directed many apartment renters, first-time buyers and move-up homebuyers in the Triangle area to its website, www.NewHome101.com. The campaign and site are designed to teach prospective buyers about the advantages of becoming a homeowner by providing an online guide for choosing and buying a new home.
Charlotte, NC (PRWEB) October 9, 2005 -- Homebuilder K. Hovnanian Homes in Raleigh was honored with three awards at the 2005 STARS Awards Gala. K. Hovnanian won a STARS Award for best brochure/direct mail piece for its NewHome101 campaign. The company also won two STARS “Outstanding Achievement” Awards for the campaign - best logo design for a company and best billboard.
The NewHome101 campaign, which helped lead the company to its best year in the Triangle area, has already brought the homebuilder 11 awards from local, national and international committees.
K. Hovnanian’s Newhome101 campaign and website, www.NewHome101.com, is designed to appeal to first-time and move-up buyers by revealing the advantages of buying a newly constructed, technologically enhanced home versus an older house. The site also educates users about the advantages of home buying versus renting.
The North Carolina Homebuilders Association (NCHBA) STARS Awards took place during the 21st Century Building Expo & Conference on Thursday, September 15, 2005 at the Westin Hotel in Charlotte. The awards show recognizes home building, sales and marketing professionals throughout North Carolina.
For more information about K. Hovnanian Homes in Raleigh, visit www.KHOV.com. For more information about NewHome101, call the K. Hovnanian Homes’ Raleigh Division at 919-462-0070 or visit www.NewHome101.com.
About K. Hovnanian Homes
Hovnanian Enterprises, Inc., founded in 1959 by Kevork S. Hovnanian, Chairman, is headquartered in Red Bank, New Jersey. The Company is one of the nation's largest homebuilders with operations in Arizona, California, Delaware, Florida, Illinois, Maryland, Michigan, Minnesota, New Jersey, New York, North Carolina, Ohio, Pennsylvania, South Carolina, Texas, Virginia and West Virginia. The Company's homes are marketed and sold under the trade names K. Hovnanian Homes, Goodman Homes, Matzel & Mumford, Diamond Homes, Westminster Homes, Forecast Homes, Parkside Homes, Brighton Homes, Parkwood Builders, Great Western Homes, Windward Homes, Cambridge Homes, Town & Country Homes, Oster Homes and First Home Builders of Florida. As the developer of K. Hovnanian's Four Seasons communities, the Company is also one of the nation's largest builders of active adult homes.
Posted by Industrial-Manufacturing at 11:43 PM | Comments (0)
Self-Builders can Solve Sustainable and Affordable Housing Crisis
“Grant more planning permissions for self builders and Britain will gain exemplar sustainable housing projects applying all of the ideas presented to this conference,” said Professor Michael Benfield the Greener Homes and Buildings conference and exhibition at Machynlleth, Powys last Friday. “Doing so will also enable the nation to make great strides toward solving Britain’s affordable housing crisis,” he continued.
(PRWEB) October 9, 2005 -- Addressing the Grand Debate, chaired by Welsh Assembly Member Mick Bates, which concluded an intensive day of seminars, presentations and showcased environmental products, Professor Benfield - a leading environmentalist, housing specialist, and nationally recognized timber frame engineer - argued passionately for a substantial increase in the grant of planning permissions for self-builders. “Everything points to the fact that if the building plots were made available we could see a doubling or tripling of the present 20,000 or so ‘self builder’ projects undertaken in the UK every year” he claimed. “Self evidently such an increase in self-build activity would make a huge dent in our need for affordable, as well as sustainable housing.”
Dedicated to mainstreaming greener building concepts for homeowners, architects, planners, surveyors, procurers and everyone working in construction related industries, findings from the Grand Debate are being fed back to the Welsh Assembly for urgent action as Ministers struggle to fulfill their claim that Wales is one of only three countries in the world to have fully embraced the principles of sustainable development in its policies.
Supported in his argument by other members of the debate’s panel of experts, Professor Benfield claimed that many self builders are in fact the ‘path finders’ for sustainable development, “… prepared to invest their own time, effort and money in using all of the materials, methods and ideas considered here today, to build their own – ‘truly ideal’ - homes”. With the conference having added its voice to the call for many more ‘demonstration’ schemes to secure massive reductions in green-house gas emissions from the built environment, he suggested that increasing self-build activity would be one of the best possible ways to create exemplar projects for sustainable development throughout the country.
On the continent many more people build their own homes than in Britain, with, for example, local authorities in parts of Germany being required to allocate up to 40% of all building land for private, one-off houses, said David Olivier, one of the panelists.
Responding to the implied criticism that town planners and their profession were to blame for mounting environmental and housing problems, Professor Benfield pointed out that Local Authority planners were subject to the ‘whims and wishes’ of the elected members – the councilors and committee members – who were their bosses and told them what to do. “Given the urgency and importance of the problems faced, the Assembly should initiate a serious and meaningful program to educate members in the issues and what is necessary to address them, possibly making this a statutory requirement for all planning committee members.” he said.
Bio-Notes:
One of the four ‘founding fathers’ of the international ‘Green Party’ movement, Dr. Michael Benfield is visiting Professor of Research in Civil and Construction Engineering with the University of Wales, Newport. He also heads Benfield ATT - a leading national firm of timber frame design, manufacture and build engineers - based in Caldicot, South East Wales (www.benfieldatt.co.uk). Additionally he has recently been appointed to chair the ‘Knowledge Hub’ – forerunner of a full-blown ‘Centre of Excellence’ – for the Wales Forest Business Partnership (WFBP). Sponsored by the WDA and Forestry Commission, the WFBP aims to facilitate the development of the Welsh timber industries sector in achieving World Class recognition.
Posted by Industrial-Manufacturing at 11:43 PM | Comments (0)
Portakabin and Zurich Municipal get Pupils Back to School with Modular Building Systems
When a fire took hold at Avon Valley School in Rugby, destroying 95% of the school buildings, the quick response and one-stop-shop service provided by Portakabin was the key to getting the school back teaching in record time. As its recently appointed approved supplier of modular buildings, Portakabin was recommended by the school’s insurers Zurich Municipal, the UK’s leading insurer of school buildings.
(PRWEB) October 9, 2005 -- Portakabin’s Coventry Hire Centre Manager, Mark Fox, quickly visited the school to discuss the necessary requirements and, after a two–week consultation and planning period, the final design and layout of the interim school modular buildings was agreed.
Mark Braine, Headteacher at Avon Valley School, said: “We worked very closely with Portakabin to create exactly what we needed. The company satisfied all of our requirements, as per our specifications, and designed a comprehensive plan for the new school.”
Over a four-week period 142 Portakabin building modules were installed at the school, creating 44 classrooms for all subjects, kitchens, a dining hall, library, ICT suites, changing rooms and toilets.
The Portakabin buildings are on hire for an initial two-year period and will house the school’s 1,000 students until the construction of their new, enlarged school is completed.
In addition to providing its high-quality buildings, Portakabin supplied all of the classroom furniture, since much of this had been destroyed in the fire. The company also supplied climate control systems for the ICT suites, access ramps for the classrooms, and a comprehensive fire and security alarm system.
Mark Braine added: “We’re all delighted with the new school and the facilities are more up to date than we had before. Students have settled in well and are enjoying being back together. My thanks go to Portakabin for the excellent service we received from the very beginning, and for the company’s total dedication to this project.”
Portakabin is accustomed to providing its facilities under such circumstances, but this is the first major project that has been carried out since it became Zurich Municipal’s approved supplier. It is also the first time that Zurich Municipal has appointed a company to act as approved supplier in the provision of school buildings, a measure which is further improving Zurich Municipal’s services to its customers.
Throughout the two year contract, Zurich Municipal's UK operation, part of the worldwide Zurich Financial Services Group, will authorise and pay for replacement facilities for its customers in the form of Portakabin buildings following damage to existing buildings through fire, flood or in the event of any other crisis.
Sheena Boomer, Purchasing Consultant at Zurich Financial Services, said: “After a thorough review, we concluded that Portakabin met our requirements in terms of quality of buildings, service and overall price and that they were best placed to look after the needs of our customers.”
The unique Portakabin Customer Charter*, developed to provide customers with total peace of mind, also helped Zurich Municipal to come to the decision that Portakabin was the best company for the job. Sheena continued: “The Customer Charter states that if the company fails to complete projects on time and on budget, we will be entitled to a week’s free hire for every day Portakabin is late.
“This gave us additional assurance that Portakabin would enable us to deliver the highest possible service to our customers.”
For further information on Portakabin products and services please contact your local Hire Centre on 0845 355 0350.
Posted by Industrial-Manufacturing at 11:42 PM | Comments (0)
A Shower of Style from Portakabin Events
Unique five star portable shower facilities, designed exclusively for events, are about to be launched by leading event facilities provider, Portakabin Events.
(PRWEB) October 9, 2005 -- The Portakabin Luxe shower unit has been developed in response to customer demand for relocatable showers that offer more space and higher levels of comfort.
Jonathan Reid, General Manager of Portakabin Events, said: “We wanted to be able to offer event organisers shower and changing facilities that provide the same quality and comfort that people would find in their own homes, and thanks to the excellent work of our experts here at Portakabin, we are now able to do this.”
The first of the new Portakabin Luxe shower units will be unveiled at this year’s Country Land & Business Association (CLA) Game Fair (22-24 July), which celebrates a range of countryside pursuits and is the biggest event of its kind in Europe.
Charlie Benson, Events Organiser for the CLA Game Fair, said: “We needed high-class facilities for our event to reflect the calibre of guests we have at the fair. We worked closely with the team at Portakabin Events and they designed a solution that exactly fitted our requirements.”
The Portakabin Luxe shower unit includes six extra wide shower cubicles (1100mmx800mm) and changing areas (1100mmx900mm), providing a lot more personal space than any other relocatable bathroom facilities.
Everything, right down to the shower cubicle doors - which are often used in high quality new house builds - has been carefully selected to provide the highest possible quality.
Charlie Benson continued: “I’ve seen a lot of shower and changing facilities in my time, but I’ve never seen one built as well as this. The new Portakabin Luxe shower unit is the best I’ve ever seen.”
For further information on the products and services available from Portakabin Events contact 01698 429414 or visit www.portakabin.co.uk.
Posted by Industrial-Manufacturing at 11:41 PM | Comments (0)
Roof-A-Cide™ Makes Algae-Stained Roofs and Premature Replacement a Thing of the Past in Southern New Jersey
Roof-A-Cide™ Makes Algae-Stained Roofs and Premature Replacement a Thing of the Past in Southern New Jersey
Roof-A-Cide, the manufacturer of environmentally safe roof cleaning solutions and algae preventatives is making their products available throughout Southern New Jersey through a recently established Authorized Roof-A-Cide™ Applicator – Sierra Construction Group (856/596-3003).
Marlton, NJ (PRWEB) October 9, 2005 -- Roof-A-Cide™ is an EPA approved algaecide / fungicide specifically designed and approved for use on roof surfaces. Roof-A-Cide™ is safe to work with, safe for the roof, and safe for landscaping. Roof-A-Cide™ has been used successfully on over 70,000 properties to date throughout the Southeast. Roof-A-Cide has Authorized Applicators in Arkansas, Florida, Georgia, Louisiana, North Carolina, South Carolina, Texas, Tennessee, Virginia and now New Jersey.
Roof-A-Cide™ has been approved for use by GAF Materials, the largest shingle manufacturer in the United States and will inhibit the growth of dark algae stains for years with each treatment. Preventative treatments generally take 30 minutes or less and a roof treated with Roof-A-Cide™ every few years will remain free and clear of unsightly algae and fungus growth for the life of the roof.
Sierra Construction Group can be reached at 856/596-3003 for a fast, free estimate on cleaning and stain prevention, as well as all phases of roof installation and maintenance.
For additional information about Roof-A-Cide products or Applicator Opportunities, contact us at our Palm City office: 800/806-6727, or on the internet by typing: www.Roof-A-Cide.com.
Posted by Industrial-Manufacturing at 11:41 PM | Comments (0)
Carpenters Union Fulfills Earl Oliver’s Vision: Commit to Job Training for Chicago’s Minority Residents; Expanded Center Fills Void
Chicago’s minority residents gained a new pathway to a well-paying career, when community leaders joined the Chicago Regional Council of Carpenters on September 22 to dedicate the Union’s expanded apprenticeship training center to the memory of Earl J. Oliver, its immediate past president, who died before its completion.
(PRWEB) October 9, 2005 -- Chicago’s minority residents gained a new pathway to a well-paying career, when community leaders joined the Chicago Regional Council of Carpenters on September 22 to dedicate the Union’s expanded apprenticeship training center to the memory of Earl J. Oliver, its immediate past president, who died before its completion.
“Earl Oliver was both a realist and a visionary,” said current Council President Martin C. Umlauf. “As the leader of our regional council he understood our strength depended on expanding the number of skilled carpenters that could serve Chicago’s development community. He also believed that given access to training, Chicagoans would flock to the center, building skills and better lives.”
Earl Oliver created the vision of a Chicago apprenticeship center in the mid-1990s, nearly a decade after the Washburne Trade School had closed, drastically decreasing the presence of union training programs in Chicago.
Boldly leading the way for other unions, in 1996 Oliver announced that the carpenters, working together with labor management, would establish a training center at the corner of Union and Cermak to ensure that urban minority residents had access to construction trade training and that Chicago, with its robust construction market, had a diverse and well-trained cadre of carpenters.
Joining Umlauf at the dedication at 2141 S. Union Avenue were Cook County Board President, John Stroger; Esther Lopez, Deputy Chief of Staff, Department of Labor and Professional Regulations, Office of the Governor; 25th Ward Alderman Daniel Solis; Council First Vice President Jeffrey Isaacson; and Regional Council Second Vice President Frank Libby.
“Our city has a long, proud tradition of building and re-building and there will always be a need for highly skilled carpenters,” said Solis. “The expanded Oliver Center brings hope to young people who want to change their lives and increase their earning power, not just in the 25th Ward, but in neighborhoods throughout the City of Chicago.”
When the center opened in 1998, it was an immediate success. Within a year, the center was graduating more than 250 people from its pre-apprenticeship programs, and demand exceeded capacity. Today, with the opening of the 38,000 square-foot addition, the Council doubled the number apprentices that can be trained each year.
“Today’s expansion of the center, which will now graduate 500 pre-apprentices each year, is a testament to Earl’s vision, tenacity and sense of fairness and justice,” said Cook County Board President John Stroger. “Earl may be gone, but his legacy will help train thousands of area residents for well paying jobs and provide Cook County contractors with the most skilled carpenters available.”
At 76,000 square feet, the expanded training center will provide state-of-the-art training to 500 pre-apprentices annually as well as continuing training for apprentice and journeymen carpenters. Over 100 apprentices per week are expected to attend daytime weekday classes, and just as many experienced carpenters are anticipated weekly for evening and weekend continuing education.
Members of the Chicago Regional Council of Carpenters earn steady and rewarding wages at all levels. Apprentices are paid while they receive an education, and earn between 40 and 80 percent of the journeymen rate, depending on their year in the program.
Journeymen wages are $35.32 per hour for commercial and residential carpentry. This means even first-year apprentices earn wages of $14.13 per hour. Pre-apprentices receive benefits that include a stipend for five weeks of their training and money towards the purchase of tools and union dues upon the completion of training.
Applicants for the Council’s pre-apprenticeship program must be at least 17 years old, reside in the 10-county Chicago area (Cook, DuPage, Grundy, Iroquois, Kane, Kankakee, Kendall, Lake, McHenry or Will counties), have successfully completed two years of required high school (a high school diploma or GED is preferred), have an original Social Security Card and be physically fit to work as a carpenter. Applicants must also pass an aptitude test. For more information, call the Chicago Regional Council of Carpenters at 847-640-7373.
Media usable photographs of the dedication can be viewed at the union’s web site at http://www.carpentersunion.org/Members.htm by scrolling down to “Photos.” Contact Gene Tenner to request 600 dpi photographs via email.
The Chicago Regional Council of Carpenters represents over 47,000 men and women working throughout 81 counties in Northern Illinois, Southeast Wisconsin, and Eastern Iowa. It is the largest Regional Council of Carpenters in the United States.
Members of the Chicago Regional Council of Carpenters include carpenters with these specialties: General Carpenter and Joiner, Residential Carpentry, Exhibit and Display Installer, Interior Systems Carpenter, Lather, Cabinetmaker and Millworker, Flooring Installer, Pile Driver, Millwright, Insulation Installer, Roofing and Siding Installer.
Since 1881 The Chicago Regional Council of Carpenters has been a positive force in building communities and improving the lives of its skilled members and their families.
Posted by Industrial-Manufacturing at 11:40 PM | Comments (0)
ColonialWebb Contractors Select Penta Technologies, Inc.'s PENTA to Standardize Construction and Service Operations
ColonialWebb Contractors, the Mid-Atlantic’s premier Construction Service firm, has selected PENTA to run its construction and service operations. ColonialWebb required a single, integrated solution which would address the needs of multiple business units, namely their construction and service enterprises.
Milwaukee, WI (PRWEB) October 9, 2005 -- Penta Technologies, Inc. announces today that ColonialWebb Contractors, the Mid-Atlantic’s premier Construction Service firm, has selected PENTA to run its construction and service operations. ColonialWebb required a single, integrated solution which would address the needs of multiple business units, namely their construction and service enterprises.
After an exhaustive 14 month vendor-selection process, ColonialWebb determined that Penta Technologies, Inc. had the best vision for large specialty contractors, citing PENTA’s tight integration of service and construction management, and development of mobile computing solutions for service organizations.
“Meeting the information and automation needs of our changing and growing business were as important to us as meeting our existing requirements in the selection of our new ERP system,” said Mike Wood, ColonialWebb CFO. “What we needed was a partner, not just a vendor. We chose Penta because of their focus on our industry, the depth of their product, their demonstrated vision and their commitment to the continued development of their world class product.”
About Penta Technologies, Inc.
Penta Technologies, Inc. develops, supports, and sells financial, accounting, and project management software systems for engineering, construction, and other project-oriented industries. Its premier product, PENTA, is the latest in an evolutionary line of financial and project management software solutions. For more information about Penta Technologies, Inc., please visit www.penta.com.
About ColonialWebb Contractors
ColonialWebb is the Mid-Atlantic Region’s premier source for Construction, Service and Manufacturing with a focus on HVAC, plumbing, electrical, process piping, refrigeration, controls, and water treatment. Over 1200 employees, located in Maryland, Virginia, North Carolina and South Carolina are committed to providing the finest service and customer support. For more information about ColonialWebb Contractors, please visit www.colonialwebb.com.
Posted by Industrial-Manufacturing at 11:39 PM | Comments (0)
Green Roof Blocks™ Expands Operations To Beijing.
Green Roof Blocks (TM), manufacturers of a patent pending self contained green roof system, has expanded its operations to Beijing, China.
St. Louis, MO (PRWEB) October 7, 2005 -- Green Roof Blocks (TM), manufacturers of a patent pending self contained green roof system, has expanded its operations to Beijing, China. Kelly Luckett, president of Green Roof Blocks™ hopes that this is just the beginning of the company’s global expansion.
“We are very pleased with our manufacturing and distribution resources in Beijing,” says Luckett. “We hope that over time can expand to other areas of the globe utilizing the same methods.”
The methods that Luckett refers to involve establishing a solid manufacturing and outside sales force, as well as selecting growers who are able to produce and cultivate the Green Roof Blocks™ growth medium. Green Roof Blocks™ contain a growth composition comprised of drought resistant sedums propagated in a soil specifically engineered for rooftop applications. Several growers were contacted in Beijing and in Southern China in order to establish a network of growers capable of meeting the growing Chinese demand.
“The green roof market in China is one of enormous potential,” says Luckett. “The various provincial governments have mandated green roof usage for new building projects as well as for retrofitting existing buildings.”
In addition to a grower, Green Roof Blocks™ selected a manufacturing facility, sales force and Director of Operations for its Beijing market.
Green Roofs are vegetated roof covers that help to reduce energy consumption and costs, decrease storm water runoff, and preserve the life of roof materials. Green Roof Blocks™ were designed as an affordable and flexible option to installing a green roof which is typically an expensive process. Green Roof Blocksª are self-contained portable units that cover four square feet of roof surface and contain a growth medium with drought resistant plants. In addition to energy and cost savings, Green Roof Blocks™ strive to provide environmental benefits, as well.
Says Luckett, “ Just as in the U.S., the Chinese government encourages private building owners to invest in making China a greener and healthier place to live. As the green (roof) building industry continues to seek a balance between budgetary and environmental priorities, and demand for these products increases, green roofs will continue to gain popularity and we should all breath a little easier.”
Green Roof Blocks™ is a subsidiary of St. Louis Metalworks, with offices located at 11701 New Halls Ferry Rd., Florissant, MO 63033. The company maintains a web site at, www.greenroofblocks.com and media site at, www.greenroofsmedia.com .
Posted by Industrial-Manufacturing at 11:38 PM | Comments (0)
Garbage Bills Got you Down in the Dumps? Is Your Real Estate Investment or Business Paying High Waste Expenses?
How do real estate investors turn trash into cash? We found a waste management company that will show you.
(PRWEB) October 8, 2005 -- Cash Flow Equipment is a waste management company that will analyze the amount of garbage produced by apartment complexes, codominiums and commercial office buildings to determine whether or not there are savings to be had by installing a trash compactor.
Developers now make it a standard practice of installing these machines when building anything from apartments, condominiums and office buildings to hospitals and super malls. Owners and investors of existing real estate are installing trash compactors and adding incredible value by saving thousands of dollars each month on their garbabge bill.
In nearly all cases, the compaction ratio of these machines are 5 to 1. This means five times fewer garbage pick-ups and a garbage bill that is significantly less. These machines typically pay themselfs off with the savings recognized each month within 1 to 3 years.
These machines are reducing the mass of garbage being dumped into our landfills in many cases by 5 times and usually more. Both ecologically and financialy these machines are an incredible asset to building owners and developers.
Posted by Industrial-Manufacturing at 11:38 PM | Comments (0)
October 07, 2005
The university is utilizing the green roof system for research purposes and is part of an eventual 1000 Green Roof Block™ system. Green Roofs are vegetated roof covers that help to reduce energy consumption and costs, decrease storm water runoff, and pr
Green Roof Blocks (TM), manufacturers of a patent pending self contained green roof system, has expanded its operations to Beijing, China.
St. Louis, MO (PRWEB) October 7, 2005 -- Green Roof Blocks (TM), manufacturers of a patent pending self contained green roof system, has expanded its operations to Beijing, China. Kelly Luckett, president of Green Roof Blocks™ hopes that this is just the beginning of the company’s global expansion.
“We are very pleased with our manufacturing and distribution resources in Beijing,” says Luckett. “We hope that over time can expand to other areas of the globe utilizing the same methods.”
The methods that Luckett refers to involve establishing a solid manufacturing and outside sales force, as well as selecting growers who are able to produce and cultivate the Green Roof Blocks™ growth medium. Green Roof Blocks™ contain a growth composition comprised of drought resistant sedums propagated in a soil specifically engineered for rooftop applications. Several growers were contacted in Beijing and in Southern China in order to establish a network of growers capable of meeting the growing Chinese demand.
“The green roof market in China is one of enormous potential,” says Luckett. “The various provincial governments have mandated green roof usage for new building projects as well as for retrofitting existing buildings.”
In addition to a grower, Green Roof Blocks™ selected a manufacturing facility, sales force and Director of Operations for its Beijing market.
Green Roofs are vegetated roof covers that help to reduce energy consumption and costs, decrease storm water runoff, and preserve the life of roof materials. Green Roof Blocks™ were designed as an affordable and flexible option to installing a green roof which is typically an expensive process. Green Roof Blocksª are self-contained portable units that cover four square feet of roof surface and contain a growth medium with drought resistant plants. In addition to energy and cost savings, Green Roof Blocks™ strive to provide environmental benefits, as well.
Says Luckett, “ Just as in the U.S., the Chinese government encourages private building owners to invest in making China a greener and healthier place to live. As the green (roof) building industry continues to seek a balance between budgetary and environmental priorities, and demand for these products increases, green roofs will continue to gain popularity and we should all breath a little easier.”
Green Roof Blocks™ is a subsidiary of St. Louis Metalworks, with offices located at 11701 New Halls Ferry Rd., Florissant, MO 63033. The company maintains a web site at, www.greenroofblocks.com and media site at, www.greenroofsmedia.com .
Posted by Industrial-Manufacturing at 03:11 AM | Comments (0)
Green Roof Blocks™ Expands Green Roof Program At Southern Illinois University Edwardsville
Green Roof Blocks™, makers of a portable self-contained green roof system, recently donated an additional 108 units of its product to Southern Illinois University Edwardsville (SIUE).
St. Louis, MO (PRWEB) October 7, 2005 -- Green Roof Blocks™, makers of a portable self-contained green roof system, recently donated an additional 108 units of its product to Southern Illinois University Edwardsville (SIUE). The addition to the green roof experiment was installed on the SIUE Engineering Building on September 20.
The university is utilizing the green roof system for research purposes and is part of an eventual 1000 Green Roof Block™ system. Green Roofs are vegetated roof covers that help to reduce energy consumption and costs, decrease storm water runoff, and preserve the life of roof materials. Individual Green Roof Blocks™ cover four square feet of roof surface and contain a growth medium with drought resistant plants.
The installation follows an initial 16 Green Roof Block™ installation on the SIUE Engineering Building on July 20. The Green Roof experiment is a collaborative effort between Green Roof Blocks™, Southern Illinois University Edwardsville, G.R.E.E.N. (Green Roof Environmental Evaluation Network) , The University of Georgia, and The University of Missouri at Columbia.
The research project was coordinated by Kelly Luckett, president of Green Roof Blocks™ and is being directed by Dr. William Retzlaff of the SIUE Environmental Sciences Program. Plant growth, performance, roof coverage and thermal characteristics will be evaluated over the next 2 years. Research outcomes will be shared with those wishing to establish commercial green roof installations.
Green Roof Blocks™ is a subsidiary of St. Louis Metalworks, with offices located at 11701 New Halls Ferry Rd., Florissant, MO 63033. The company maintains a web site at, www.greenroofblocks.com and media site at, www.greenroofsmedia.com .
Posted by Industrial-Manufacturing at 03:10 AM | Comments (0)
Materials and Design at Abitare il Tempo
At the most exclusive trade fair for interior design a sneak preview of some of the latest tile products for fall 2005.
VERONA, Italy (PRWEB) October 7, 2005 -- More than fifty thousand visitors flocked to the 20th Abitare il Tempo trade fair for luxury furniture and home decorating accessories, held in Verona September 15 through 19.
At the trade fair Iris Ceramica presented a sneak preview of some of the new products in its MA.DE - Materials and Design 05 collection, with an installation by architects Ludovica+Roberto Palomba, who created the Terra e Fuoco exhibition at Fuorisalone del mobile in Milan for the company in 2005, as well as providing artistic direction at the last Abitare il Tempo trade fair.The concept behind the installation is based on the combination of materials and design, and takes the form of a hybrid space which could be incorporated into a home or a modern hotel, a boutique or a fashionable night spot: a spacious environment, very sparely furnished, in which ceramic tile materials become the true decor complements.
A workshop of ideas on the role of textures and formats in interior design, the ways light and colour work together, a decorative style centring around the concept "less is more" and a philosophy of composition that breaks out of the usual mould to combine stone with metal, natural fibre floorings with a futuristic surface of iridescent pyramids.
Iris Ceramica: www.irisceramica.com
Abitare il Tempo: www.abitareiltempo.it
Palomba Serafini Studio Associato: www.palombaserafini.com
Posted by Industrial-Manufacturing at 03:09 AM | Comments (0)
Celebrating suite success.
Portakabin has proved that convenience is key to success in today’s ever-competitive housing market with the sale of its 100th modular marketing suite.
(PRWEB) October 7, 2005 -- Launched less than two years ago, Portakabin Marketing Suites were developed to provide house builders, such as Redrow Homes, with high quality, bespoke buildings that provide a better environment to showcase new developments.
Providing spacious, stylish environments with the flexibility to reflect whatever image is required - from the hustle and bustle of city living to quieter rural developments - the marketing suites can be configured to the individual needs of the project.
One of the UK’s most successful residential and commercial property developers, Redrow Homes was the first customer to purchase a Portakabin Marketing Suite and has now become the proud owner of the 100th.
Situated at the company’s new Platform One development in Staffordshire, Redrow bought this marketing suite, as well as the others it now owns, to reflect its reputation for quality.
Chris Pitt, Redrow Homes’ Plant Manager, said: “More often than not the marketing suite is the first building to be put in place on any new site. They are crucial to the success of a development as potential buyers have to be able to visualise what the properties will be like when they are finished.”
“Before Portakabin introduced its new modular marketing suite range, we used to site our marketing offices in the space allocated for a double garage, which meant it could take several weeks before it was up and running. It also meant we had to design them to fit in with the physical constraints of the space on offer, rather than what we really needed in terms of shape and size.
“Portakabin has provided us with high quality site accommodation for many years so we decided to look at what it could offer us for marketing purposes, which could be easily moved from site to site and constructed quickly.”
Marketing suites need to make use of as much natural light as possible, as well as being spacious and airy for sales staff and customers. The exterior of the buildings also needs to be modern and smart to reflect the high standard of homes being built.
Portakabin Marketing Suites can be up and running within two weeks, compared to the average 12 weeks it takes to construct one by traditional means, allowing housebuilders to begin marketing new developments much more quickly.
Chris continued: “The team at Portakabin worked closely with us to design and develop a bespoke modular building that incorporated all the features we required and we’re very pleased with the results. That’s why we’ve bought so many!
“We currently use Portakabin Marketing Suites on developments across the country. The buildings are completely flexible so as well as being totally portable buildings, if we feel that the layout of a suite needs to be adapted to more closely reflect the properties being built in a particular area it can be easily changed.”
For further information about Portakabin products and services contact 01904 611655 or visit www.portakabin.co.uk.
Posted by Industrial-Manufacturing at 03:08 AM | Comments (0)
Portakabin Portable Accommodation Marketing Suites Hit the Road
Leading modular building supplier Portakabin is launching another industry first by introducing a new range of marketing suites using the Titan building range.
(PRWEB) October 7, 2005 -- The suites have been specifically designed to enable house builders to provide potential customers with the opportunity to experience the homes they have to offer in a modern, comfortable environment.
Available in four sizes, from 36m2 to 67m2, Portakabin Titan, the largest relocatable building in Europe, is easy to install and move from site to site as it is transported in one load, ready for immediate use. It can also be fitted out to meet individual house builders’ requirements.
Andy Hume, Portakabin Business Development Manager for Construction, said: “Although we already construct marketing suites in our Ultima range we recognized that not all house builders had the need to showcase such large developments and range of house types within their marketing suites."
“The Titan marketing suites are perfect for these customers as they can choose the layout and size of their buildings which can then be easily transported from site to site. The layout can also be changed to meet the requirements of individual developments.”
The Titan building range not only offers the largest single modular building in Europe, it also offers a versatile linking system that creates full building complexes. The energy efficient design complies with Part L of the building regulations 2002 and reduces heating costs for customers.
To find out more about the Portakabin Titan building range call 0845 200 1111 or visit www.portakabin.co.uk.
Posted by Industrial-Manufacturing at 03:08 AM | Comments (0)
First Flush of Success for Primary School Pupils
(PRWEB) October 7, 2005 -- The days of dark, dank toilets in schools will soon be long gone, thanks to the launch of the new Portaloo Junior washroom.
The toilet unit, which has been specifically designed for use by Key Stages 1 and 2 primary school children, has been developed by the UK’s leading supplier of portable restroom facilities in response to customer demand.
John Smith, Portaloo Business Manager, said: “Recently we have had more and more customers in the education sector requesting portable washroom facilities that are designed specifically for use by primary school-age children. In the past we have met this demand by modifying our existing products, but we wanted to provide a solution that was especially designed for this requirement.
“Through our work with customers we identified all the features needed to ensure Portaloo Junior washrooms provide the highest quality amenities for primary school children across the country.”
The 7.48m x 3.27m toilet block can accommodate up to 80 pupils. It provides separate boys and girls toilets or can be used as a single sex block.
Designed in conjunction with The Education (School Premises) Regulations 1999, which includes guidelines on ‘Washrooms for Pupils’, the children’s toilet unit has an all-steel construction, providing maximum durability, comfort and easy maintenance.
John continued: “As well as meeting the requirements set out in the Education (School Premises) Regulations, we have also ensured that the new toilet units incorporate safety features to protect the young children using them.
“For example, we have included finger guards on the entrance door and internal doors so that fingers can’t get trapped, possibly causing nasty injuries.
“We have also used bright, contrasting colours for all the internal furnishings, which helps visually impaired people as well as providing a nice, vibrant environment for young children.”
Portaloo Junior can be used as a stand-alone building, or can be easily linked to an existing building or Portakabin products*.
It also features a concealed central storage cupboard, which houses all the pipework and cisterns for the toilets. This reduces the risk of accidental damage or vandalism and also provides ease of maintenance for any plumbing work that needs to be carried out.
Other features include:
-Low-level urinals, pedestals and recessed washbasins suitable for pupils at Key Stages 1 and 2.
-A thermostatically-controlled water supply, which ensures consistent water temperature and prevents scalding.
-A high capacity 50-litre storage tank, providing a plentiful supply of hot water.
-High-level heaters for maximum comfort and child safety.
-Scalloped toilet cubicle doors, which allow teacher supervision whilst maintaining privacy.
-Vanity units with recessed washbasins enhance the appearance, whilst also concealing plumbing and therefore minimising the risk of damage.
-Child-height mirrors over the washbasins.
John concluded: “The new Portaloo Junior product is an ideal solution for schools in a whole range of circumstances, such as periods of refurbishment or to accommodate an increase in pupil numbers.
“They provide smart, comfortable amenities, which can be sited anywhere they are required on the school grounds. The feedback we have had from customers so far has been very positive and we are looking forward to working with more schools across the country to help them provide quality washroom facilities for their pupils at all times.”
For further information on the products and services available from Portaloo contact 0845 200 5555 or visit www.portaloo.co.uk.
Posted by Industrial-Manufacturing at 03:06 AM | Comments (0)
Portakabin Event Hire Swings into Action for PGA European Tour
(PRWEB) October 7, 2005 -- Portakabin Event Hire and PGA European Tour are teeing off a new partnership after the modular building supplier hooked the contract to supply all site accommodation for PGA European Tour events for the next two years.
The contract includes some of the most prestigious events in the golfing calendar, including the BMW Championship, the Barclays Scottish Open, the Daily Telegraph Dunlop Masters and the Senior British Open.
Tom Critchley, Event Staging Manager at PGA European Tour, said: “We had worked with our previous supplier for the past 20 years, but after a review of services we decided to put the contract out to tender.
“We met with three companies, but the quality of the buildings and the level of service that Portakabin Event Hire is able to provide really stood out from the rest. We worked with the Portakabin team when they provided all the portable site accommodation for the Ryder Cup in 2002, allowing us to see these high standards in action and we were very impressed.”
Portakabin Event Hire will provide a range of buildings, which will be used for a wide variety of purposes. From ticket offices to bathroom facilities, medical centres to high security storage, the buildings will be delivered and installed by highly experienced professionals and accompanied by a dedicated on-site team to ensure full maintenance of the buildings throughout the events.
Jonathan Reid, General Manager of Portakabin Events, said: “We’re delighted to have won this contract and are looking forward to an excellent working relationship with Tom and the team at PGA European Tour over the next two years.
“We have got extensive experience in providing facilities for a wide variety of events and are always on hand to provide advice and guidance, as well as full on-site support.”
The PGA European Tour partnership is the latest in a string of high profile contracts won by Portakabin Event Hire including The Open Golf Championship and MTV Europe, the Country, Land and Business Association (CAA) Games Fair.
For further information on the products and services available from Portakabin Event Hire contact 01698 429414 or visit www.portakabin.co.uk.
Posted by Industrial-Manufacturing at 03:06 AM | Comments (0)
October 06, 2005
9th Annual Historic Preservation Conference Scheduled For February '06
Colorado Preservation Inc.'s 9th annual historic preservation conference "Saving Places 2006: Building on the Past "will take place February 8-10, 2006, at the historic 1770 Sherman Street Event Complex in downtown Denver.
Denver, CO (PRWEB) October 6, 2005 -- Colorado Preservation Inc.'s 9th annual historic preservation conference "Saving Places 2006: Building on the Past" will take place February 8-10, 2006, at the historic 1770 Sherman Street Event Complex in downtown Denver. The program features 200 national and regional preservation experts discussing current preservation programs, projects, trends and technology, as well as educational sessions, workshops, tours, networking opportunities, and the only trade show of preservation goods, services and products in the Rocky Mountain region. Registration information is available at www.coloradopreservation.org, or contact Colorado Preservation at 303-893-4260 or e-mail protected from spam bots. Early bird registration starts at $130. Continuing education credits are available for realtors and architects.
One of the nation's premiere historic preservation education conferences, the event is expected to attract more than 1,000 attendees and includes the announcement of Colorado's 2006 Most Endangered Places, Colorado's Main Street and Preserve America communities, and the Colorado Historical Society Stephen Hart awards.
The 2006 program focuses on preservation's past, present and future as it recognizes the 100th Anniversary of the Antiquities Act, the 100th Anniversary of Mesa Verde National Park and the 40th Anniversary of the National Historic Preservation Act.
Past attendees have included architects, community leaders, contractors, planners, real estate professionals, landscape architects, preservationists, archaeologists, craftsmen, historic neighborhood groups, and other advocates of preserving American heritage.
The conference is funded, in part, by the Colorado State Historical Fund, a program of the Colorado Historical Society.
Contact:
Ann Pritzlaff
Phone: 303-893-4260 or 303-475-9403
Posted by Industrial-Manufacturing at 05:42 AM | Comments (0)
Add Decorative Privacy to Sidelights
EtchArt has introduced a new line of decorative window films that transform ordinary glass sidelights into decorative panels that add privacy and a custom look to the front entrance.
(PRWEB via PR Web Direct) October 6, 2005 -- EtchArt has introduced a new line of decorative window films that transform ordinary glass sidelights into decorative panels that add privacy and a custom look to the front entrance.
Sharon Mosher owns D&S Unique Creations, a home décor store in Arizona. Before she found Wallpaper for Windows™, she had trouble offering help to customers who wanted more privacy or visual interest at their front door. She had carried adhesive-backed privacy film, but stopped because it was too hard to use. “Anything I would have trouble applying, I would have trouble selling,” she said.
When she started carrying Wallpaper for Windows™ last fall, the problem was solved. “We have had so much positive feedback on this product in the short time we've carried it, it's amazing,” she said.
Mosher's store is nestled in an upscale area in the middle of a building frenzy. Many of the homebuyers have opted for clear glass sidelights to flank their door, rather than upgrading to the more-expensive decorative glass.
They’re discovering after they move in, however, that the clear sidelights leave them too exposed to whoever comes to the front door. Or they just find the look too plain.
Mosher points them toward Wallpaper for Windows™. The adhesive-free vinyl film easily gives the look of decorative glass to the plain glass sidelight, increasing privacy and letting in sunlight. Wallpaper for Windows™ comes in a variety of designs and sizes to decorate sidelights, windows, and glass doors.
Buyers just spritz the window with water from a spray bottle, apply the film, and smooth out air bubbles with the plastic tool included with the product. “The ease of the product is the No. 1 seller,” Mosher said. For those who are leery of the “easy to install” description, Mosher has a demonstration area in the store where they can see it applied and try it themselves.
“People go out of their way to call and let us know how happy they are with it,” she said. Visit www.wallpaperforwindows.com to see the decorative etched and stained glass designs.
Images available on request. Some images and additional information is available at: http://wallpaperforwindows.com/pressarea/ and in the photo gallery http://wallpaperforwindows.com/gallery/
Contact:
Renee Combs or Larry Cashion
800-320-8439
Posted by Industrial-Manufacturing at 05:41 AM | Comments (0)
Lorman Education Services presents 'Construction Lien Law' seminar on November 10, 2005.
This 'Construction Lien Law' seminar will provide all those who work in the construction field with the law, forms, techniques and strategies to properly create and preservelien rights, as well as several other areas of law important to collections in the construction industry.
(PRWEB) September 22, 2005 -- For anyone involved in the construction industry, the ultimate goal is to be paid. To assure that you are properly and timely paid for your labor, materials or equipment provided, it is necessary to follow specific steps which sometimes involve the filing of a construction lien or bond claim.
This seminar will provide all those who work in the construction field in South Florida with the law, forms, techniques and strategies to properly create and preserve lien rights, as well as several other areas of law important to collections in the construction industry.
Melinda Gentile, Esq., is a partner in the law firm of Peckar & Abramson, P.C., and is board certified in construction law by The Florida Bar. She has developed a particular expertise in all aspects of construction law and construction dispute resolution and has demonstrated success in preparing and handling construction matters ranging from bid protests to contract disputes and from construction liens to defect claims.
In addition to her construction law practice, Ms. Gentile maintains an active practice in other areas of general, civil and commercial litigation. Her construction law practice has provided substantial experience and understanding of the development and construction process, which is used to assist engineers, contractors, construction managers, subcontractors, architects, owners, materialmen, suppliers, laborers and sureties in avoiding and resolving disputes during the construction process.
Ms. Gentile's representation begins at the earliest stages of the construction process and continues through completion and any subsequent disputes which may arise. She endeavors, wherever possible, to resolve disputes that arise during the contracting and construction process immediately in an effort to avoid litigation upon completion of the project. When dispute resolution cannot be accomplished during the construction process, Ms. Gentile has vigorously represented her clients in varied litigation proceedings. She has successfully handled a variety of matters before state courts, federal courts, and in arbitration, mediation, administrative proceedings and private negotiations.
Neal I. Sklar, Esq., is a partner in the law firm of Peckar & Abramson, P.C., and is board certified in construction law by The Florida Bar. His primary area of practice is construction law, which includes the representation of general contractors, subcontractors, property owners, material suppliers and design professionals in a variety of construction related matters.
Mr. Sklar's services include the preparation and negotiation of construction contracts as well as the negotiation, mediation, arbitration and litigation of construction contract disputes, construction lien claims, construction defect claims, design defect claims, bond claims, insurance claims and related matters.
A substantial portion of his practice involves providing on-site counsel and day-to-day guidance to clients on small, medium and some of the nation's largest construction projects. When litigation is required, Mr. Sklar has vigorously represented his clients in assorted litigation proceedings. He has successfully handled a wide range of matters before state courts, federal courts, arbitration tribunals, mediation panels, administrative boards, in out of court negotiations and in appellate arenas.
Mr. Sklar has represented clients in cases involving concrete, roofing, foundation, bulkhead, drywall, water proofing, stucco, paint, window and door assemblies, HVAC and several other building components. Additionally, his practice includes real property litigation, commercial litigation, mortgage foreclosure litigation and business torts.
Mr. Sklar received his B.A. degree from the University of Miami and his law degree from Nova University, Shephard Broad Law Center. He is admitted to practice law before the United States Court of Appeals for the 11th Circuit, the United States District Court for the Southern and Middle Districts of Florida, as well as all courts of the state of Florida. Mr. Sklar is a member of numerous professional organizations, has also authored several articles on current developments in construction law and is a frequent lecturer at seminars on construction-related matters.
Gary M. Stein, Esq., is a partner in the law firm of Peckar & Abramson, P.C. His primary areas of practice are construction and real property disputes. This includes the representation of owners, developers, general contractors and subcontractors in the litigation, arbitration and mediation of construction and design defect claims, contract claims, as well as the negotiation and preparation of construction documents and related matters.
Mr. Stein received his B.A. degree from the University of Florida and his J.D. degree from the University of Miami. He has lectured before various professional groups and has authored articles on construction related matters in various publications. Mr. Stein is a member of the Panel Of Arbitrators, American Arbitration Association, Academy of Florida Trial Lawyers, Dade County Bar Association, American Bar Association – Construction Industry Forum, The Florida Bar, Construction Specifications Institute, the AGC South Florida Chapter and the American Trial Lawyers Association.
This one-day seminar is designed for attorneys whose practice involves construction related matters, lenders, owners/developers, contractors, construction managers, subcontractors, material suppliers, architects, engineers, controllers, project managers, presidents, vice presidents and others involved in the construction industry.
To register for this event please click http://www.lorman.com/info/357805 or please call 866-352-9539 to speak with a Lorman Education customer service representative. Reference number for this event is 18189.
Posted by Industrial-Manufacturing at 05:40 AM | Comments (0)
ebuildingproducts.com Announces the Addition of Firestopping
ebuildingproducts, inc., a distributor of commercial, industrial and residential building products, announced the addition of Metacaulk® Firestopping products to their growing product line available at ebuildingproducts.com. The new line features Metacaulk’s caulks, sealants, collars, wrap strip, and electrical/large opening firestop. ebuildingproducts.com stocks Metacaulk's complete line of Firestopping products.
Frederick, MD (PRWEB) October 6, 2005 -- ebuildingproducts, inc., a distributor of commercial, industrial and residential building products, announced the addition of Metacaulk® Firestopping products to their growing product line available at ebuildingproducts.com. The new line features Metacaulk’s caulks, sealants, collars, wrap strip, and electrical/large opening firestop. ebuildingproducts.com stocks Metacaulk's complete line of Firestopping products.
ebuilding products is dedicated to being your premier “online building products provider.” Founded in 2004, we are located in Frederick, Maryland. Just 40 miles north of Washington DC. We are open Monday through Friday, 7 a.m. - 5:00 p.m., eastern standard time.
ebuildingproducts is the premier provider of building products on the web. We offer over a 1000 commercial and residential building products, ranging from Access Doors, Firestopping, Fire Extinguishers to Laser Pointers.
ebuildingproducts.com offers free standard shipping on orders over $50 shipped within the contiguous 48 US States. For expedited shipping please contact us. Expedited shipping is subject to availability and rates.Purchase $500 of products at ebuildingproducts.com and receive 5% off your total order. $1000 gets you 10% off and a $1500 purchase we will give you a 15% discount. With our free shipping and great savings offer, ebuildingproducts.com is your one stop shop for all of your building product needs.
Our warehouse is stocked with all of the products you see featured on this web site. Give us an opportunity to work with you on your next project!
For more information about ebuildingproducts.com please e-mail e-mail protected from spam bots, visit ebuildingproducts.com. or call 888.926.1365
Posted by Industrial-Manufacturing at 05:39 AM | Comments (0)
Lorman Education Services presents 'Construction Delay Claims' seminar on November 16, 2005
This 'Construction Delay Claims' seminar will explain the legal and scientific basis of delay claims from a practical perspective.
(PRWEB) September 22, 2005 -- Industry experts will explain the legal and scientific basis of delay claims from a practical perspective. Proper techniques for proving – and disproving – such claims will be explained, along with the nuts and bolts of litigation strategy.
Nicholas K. Holmes, Esq. is an officer in the law firm of Nelson, Kinder, Mosseau & Saturley, P.C., located in Boston, Massachusetts, and Manchester, New Hampshire. Mr. Holmes is a member of the firm's Construction Industry Practice Group. His practice is devoted primarily to construction litigation; representing owners, architects, engineers and contractors before arbitration panels; and in state and federal courts throughout the United States. Mr. Holmes received a B.A. degree in history from Cornell University and a J.D. degree from the University of Wisconsin.
Anthony D. Lee, CPA is a construction claims consultant and forensic accountant with 30 years of experience in over 100 construction claims involving public buildings, highways and sewer lines, private and federal housing projects, hotels, schools, office buildings, automatic toll collection systems, marinas, landfill capping, power plant, nuclear power plant and a major bridge. The size of the claims range from $100,000 to $50 million. Mr. Lee helps contractors prepare claims, analyzes claims presented by contractors against owners and design professionals, and provides expert testimony. He leads construction claims seminars and has published several articles on the topic. Mr. Lee previously worked with Arthur Andersen & Co. in San Francisco and focused on the audits of construction, mining and real estate companies. He also participated in a litigation support team which provided expert analysis and testimony of construction claims. Mr. Lee subsequently was the chief financial officer for Williams & Burrows, a large general contractor in Belmont, California, with over $100 million in revenues and 400 employees, where he coordinated legal activities for claims with lawyers, subcontractors and owners. He is an arbitrator of construction disputes for the American Arbitration Association, member of the Construction Financial Management Association and past chairman of the Massachusetts Society of CPAs' Construction Industry Committee. Mr. Lee is a certified public accountant, and he graduated with a B.A. degree in economics from Yale University and a M.B.A. degree from Rutgers University. His office is in Wayland, Massachusetts.
Michael T. McInerny, Esq. is an officer of Nelson, Kinder, Mosseau & Saturley, P.C. and chairs its Construction Industry Practice Group. He has 20 years of experience in construction law, both as a trial attorney and as in-house counsel to a large international engineering and contracting company. Mr. McInerny has a civil engineering degree from the University of Notre Dame and is a licensed civil engineer in the state of California. He has a law degree from the University of Maryland and is admitted to practice before the courts in Maryland, Connecticut, and Massachusetts, as well as the Federal Court of Contract Claims. Mr. McInerny is a member of the ABA's Forum on the Construction Industry.
Daniel P. Moynihan, PE has more than 30 years of experience in the construction industry. He has extensive experience in claims evaluation, analysis and preparation, project management and surety consulting. Mr. Moynihan has been a vice president of Strategy, Inc. since 1994. He has prepared and evaluated numerous claims on behalf of contractors, owners, designers and insurers on projects including waste water treatment and industrial facilities; state and municipal buildings; and educational, health care and residential facilities. Mr. Moynihan has analyzed issues ranging from impact and delay to loss of efficiency and lost profits. He has testified at mediations and arbitration hearings, and has facilitated negotiated settlements. Mr. Moynihan is a panelist for the American Arbitration Association, and a member of the National Society of Professional Engineers and the American Society of Civil Engineers. He has a B.S. degree in civil engineering from the University of New Hampshire, and is licensed as a professional engineer in New Hampshire and Vermont.
This one-day seminar is designed for project managers, attorneys, presidents, vice presidents, engineers, contractors, subcontractors, owners, developers, principals, architects, contract managers, lenders and accountants.
To register for this event please click http://www.lorman.com/info/360236 or please call 866-352-9539 to speak with a Lorman Education customer service representative. Reference number for this event is 18189.
Posted by Industrial-Manufacturing at 05:39 AM | Comments (0)
October 05, 2005
NiteLites of Chicago to Illuminate the Old House, New House Home Show from Oct. 7-9
NiteLites of Chicago will be shining brightly from Oct. 7-9 at this year’s Old House, New House Home Show in Saint Charles, Illinois. Stop by and visit co-owners Amar and Tushar Patel for more information.
(PRWEB) October 5, 2005 -- This year's Old House New House Home Show will be a little bit brighter due to the presences of NiteLites of Chicago. Amar and Tushar Patel, owners of NiteLites of Chicago, will be there ready to assist in all landscape lighting needs. This year's show will be held at Pheasant Run in Saint Charles, Illinois from October 7th through October 9th.
NiteLites is an industry leader in the low voltage, outdoor landscape and architectural lighting field and specializes in both residential and commercial installations.
NiteLites specializes in creating many different lighting effects for your home or commercial lighting project. Some of these effects include:
* Accent and spotlighting – To add drama to a landscape or to focus attention on a specific architectural feature of a home by shining an intense spotlight on it.
* Path or outdoor lighting – Placing fixtures at a low level to make walking on a garden path safer and more serene.
* Washing – Installing a light at the base of a wall or hedge to wash light over the surface, creating a soft glow effect.
* Up lighting – Shining a light up from the ground into the branches of a tree to accentuate the shape of the tree and to highlight its foliage.
* Moonlighting – By locating lights 14 to 16 feet up in the branches of taller trees and angling the light upward, a romantic moonlight effect is created. To create a subtle, whimsical lighting effect on the ground, similar to a full moon shining through the trees, the well elevated fixtures will be angled in the ground direction.
* Shadowing – Installing spotlights low in front of a tree or statue with a striking profile will create shadows with depth. To create an even more dramatic look, your lighting designer may place the lights high above the focal point.
* Silhouetting – By positioning lights behind and below an object, a distinctive silhouette is produced.
* Spread lighting - Hiding lights in low-lying landscaping and ground cover causes the lighting to “spread” which emphasizes the textures and patterns of the plants.
NiteLites is offering a free demonstration for your property. See the results of a NiteLites system before you invest anything. A NiteLites professional will design and temporarily install a lighting system on your property. You can work with a NiteLites designer to develop an application that reflects your personal tastes and fits your budget. By taking advantage of the evening demonstration, you will see exactly how your home will be illuminated and accentuated. NiteLites also provides you with an accurate cost estimate for the finished installation. There are no surprises with the NiteLites lighting system.
NiteLites' world headquarters, located in Franklin, Ohio, specializes in the manufacturing, design, installation, and lifetime maintenance of top-quality, low voltage lighting for both residential and commercial applications. NiteLites continually strives to elevate the standards of quality, safety, and professionalism in the outdoor lighting industry. The NiteLites products and systems provide the latest cutting edge technology from their progressive manufacturers as well as a solid history of providing first rate service to every client. For more information on a NiteLites franchise, please call 1-866-NITELITES or visit our website at www.nitelites.com and click on Franchise Opportunities.
For more information on NiteLites Architectural and Landscape Lighting in your area or to schedule a free nighttime demonstration, visit Amar and Tushar at the Old House, New House Home Show or call (847) 222-0226.
If you are looking for more information on the Old House, New House Home Show, check out their website at www.kennedyproductions.com.
Posted by Industrial-Manufacturing at 03:52 AM | Comments (0)
Concrete Paver Sales Rise Dramatically in 2004
North American sales of concrete pavers were up 15.4 percent from 2003 to 2004, according to the Interlocking Concrete Pavement Institute in Washington, DC.
Washington, D.C. (PRWEB) October 5, 2005 -- The Interlocking Concrete Pavement Institute (ICPI) announces the release of an annual survey that confirms continued growth of concrete pavers in North America for 2004. The survey estimated total sales for North America at 710 million sf (65.9 million m2). This is divided into approximately 630 million sf (58.5 million m2) for the U.S. and 80 million sf (7.4 million m2) for Canada. Comparing results from a similar survey last year by ICPI, the amount sold represents a 15.4% increase from 2003 to 2004. Since the survey’s inception in 1999, the North American concrete paver market has more than doubled.
“This dramatic growth demonstrates the continued strength of the segmental concrete pavement market in North America…” said Steve Berry, ICPI Chairman, “especially in the residential and municipal markets.”
As with previous surveys, the residential market was the largest, accounting for 77 percent of concrete paver sales in 2004. The second largest market was commercial at 16.5 percent, followed by municipal at 6.0 percent. The industrial/port/airport market accounted for the smallest portion, representing 0.5 percent of all paver sales.
Permeable interlocking concrete pavers were surveyed for the first time. As a percentage of total paver production they accounted for approximately 1%. Sales for this product will be surveyed in coming years to develop a trend line. Given developments in national, provincial, state and local stormwater regulations to reduce runoff, sales of permeable interlocking concrete pavers are expected to grow.
North American cement consumption in 2004 was 1,774,166 tons (1,612,878 metric tonnes), compared to 1,552,947 tons (1,411,770 metric tonnes) in 2003. U.S. cement consumption accounted for 1,574,260 tons (1,431,145 metric tonnes), while Canadian consumption was 199,906 tons (181,733 metric tonnes).
Industry Insights, a nationally recognized market research firm, conducted this survey for ICPI. The survey report is available from the Interlocking Concrete Pavement Institute (ICPI). It can be ordered at www.icpi.org or by contacting ICPI at tel: 202-712-9036; fax: 202-408-0285; e-mail: e-mail protected from spam bots.
ICPI is a trade association whose mission is to increase the use of segmental concrete pavement systems in North America. Applications for “pavers” include driveways, patios, plazas, walkways, roofs, airports, streets, ports, and stadiums. ICPI members include producers, contractors, design professionals and consultants. ICPI promotes the highest product standards through ICPI product certification and installation standards through ICPI contractor certification. ICPI publishes the Interlocking Concrete Pavement Magazine, along with marketing and technical resources for design professionals, contractors, and homeowners.
Posted by Industrial-Manufacturing at 03:51 AM | Comments (0)
Yorkon Awarded Contracts Totaling £5m to Build New Healthcare Facilities at Surrey Hospital
Award-winning off-site construction specialist and Portakabin subsidiary, Yorkon, has been awarded contracts totalling more than £5m to build new healthcare facilities at St. Peter’s Hospital in Chertsey, Surrey.
(PRWEB) October 5, 2005 -- Award-winning off-site construction specialist and Portakabin subsidiary, Yorkon, has been awarded contracts totalling more than £5m to build new healthcare facilities at St. Peter’s Hospital in Chertsey, Surrey.
These latest contracts bring the value of Yorkon’s work in the healthcare sector so far this year to over £20m.
With this latest investment, the local community in Chertsey will benefit from a new purpose-designed day surgery unit and additional ward accommodation providing 56 in-patient beds for emergency admissions.
Both buildings have now been manufactured off-site and craned into position over three weekends to reduce disruption to hospital staff and patients, and remove the need for decanting. This more innovative approach to construction will also ensure a faster programme time.
Designed by Todd Architects, the two-storey ward block will comprise 10 four-bed wards and 16 single bedrooms. Additional facilities include a nurse’s station, bathrooms, toilets, patient’s day room, discharge lounge, offices, staff room and a link to the main hospital ‘street’. Externally, the scheme will be clad in brickwork, rendered panels and cedar boarding to create an attractive finish as the building is prominently located at the Duchess of Kent Wing, one of the main hospital entrances.
The day surgery unit, which will be fitted out by Yorkon and linked to the main hospital building, will comprise an operating theatre, anaesthetics room, preparation area, reception and a 12-bed recovery ward.
Commenting on the construction projects, Peter Curtis, Capital Projects Manager for Ashford and St. Peter’s Hospitals NHS Trust, said, “The locations of both of these new schemes are constrained by other buildings on this busy hospital site. Moving much of the construction work off-site and into a factory has allowed us to expand the facilities at St. Peter’s with as little disruption to the running of the hospital as possible.”
He added, “These are challenging projects and I am pleased to report that we have been impressed by the efficiency of the cranage and installation process. Off-site construction was more cost-effective for these two schemes than site-based building methods. It is also important to have both buildings fully operational quickly in order for us to complete a major reorganisation of service provision ahead of the busy winter months. The modular approach will enable us to achieve this.”
The two construction projects undertaken by Yorkon are part of a £13m reconfiguration programme which involves the relocation of emergency and medical services to St. Peter’s Hospital and elective surgery to Ashford Hospital including the creation of an Orthopaedic Treatment Centre and rehabilitation services at that hospital.
www.yorkon.info
Posted by Industrial-Manufacturing at 03:50 AM | Comments (0)
SCHWING Stetter India Bags Indo German Chamber of Commerce Award
SCHWING Stetter India Private Limited, a 100% subsidiary of SCHWING Stetter Gmbh, Germany, headquartered at SIPCOT Industrial Estate near Chennai, has bagged an award for outstanding contribution towards the promotion of Indo-German Economic Relations from Indo-German Chamber of Commerce. Mr. Anand Sundaresan, Managing Director, SCHWING Stetter India received the award from the Union Civil Aviation Minister Mr. Praful Patel.
Chennai(PRWEB) October 5, 2005 -- SCHWING Stetter India Private Limited, a 100% subsidiary of SCHWING Stetter Gmbh, Germany, headquartered at SIPCOT Industrial Estate near Chennai, has bagged an award for outstanding contribution towards the promotion of Indo-German Economic Relations from Indo-German Chamber of Commerce. Mr. Anand Sundaresan, Managing Director, SCHWING Stetter India received the award from the Union Civil Aviation Minister Mr. Praful Patel.
On receiving the Award, Mr. Anand Sundaresan said, “With Indo-German bi-lateral trade set to touch a new pinnacle this year by recording growth of almost 21% during first half of 2005, we are proud for the part we played in Indo-German Economic Relations. We appreciate the efforts of the Indo-German Chamber of Commerce in instituting such an Award to motivate and honor the member corporates.”
A wholly owned subsidiary of the Euro 600 Million Ready Mix Concrete (RMC) equipment global giant SCHWING Group of Germany, SCHWING Stetter India Private Limited manufactures a wide range of Batching plants, Transit mixers and concrete pumps. Set-up in 1999 with an investment of Rs. 14 crores and an initial turnover of 8 crores, the company had undertaken expansion of Rs. 18 crores in 2004 and now sells equipment worth Rs.250 crores a year. SCHWING Stetter India today supplies RMC equipment to the Indian subcontinent and exports to 14 countries in the neigbourhood.
About SCHWING Stetter (India) Private Limited
Incorporated in June 1998, and commencing its manufacturing operations in 1999, SCHWING Stetter India is a 100% subsidiary of SCHWING Group of companies, a 600 million euro German Concrete machinery manufacturer. SCHWING Stetter is a market leader in manufacturing equipment for concrete preparation, placement, transportation and recycling.
In November 2001 SCHWING Stetter India moved to its own, state-of-the-art manufacturing facility at SIPCOT Industrial Park near Chennai, on a land measuring 45,000 Sqm. With demand for its products growing at a fast pace, SCHWING Stetter has doubled its present capacity with an investment of Rs 18 crores. SCHWING is planning to make India the hub for some of its product ranges.
SCHWING Stetter (India) Private Limited, manufactures computer controlled concrete batching plants, transit mixers for transporting readymade concrete to construction sites, concrete pumps and concrete placing booms. It caters to the needs of infrastructure developers and also acts as an OEM supplier to various cement companies who offer Ready Mix Concrete.
SCHWING has its manufacturing units in 8 countries including Germany, Austria, USA, Brazil, Russia, China and India, sales and service centres in France, Netherlands, Austria, Czech Republic, Sweden and Korea as well as representations in more than 125 countries worldwide.
For more details, contact:
John Ashok / Sriram Govindarajan
Tel: 52144890 / 91 / 92
Posted by Industrial-Manufacturing at 03:50 AM | Comments (0)
October 04, 2005
SteelCorr and Severstal Group Create Joint Venture
The new company, to be called SeverCorr, will construct and operate the world's newest state-of-the-art steel mill in Lowndes County, Mississippi.
Columbus, MS (PRWEB via PR Web Direct) October 4, 2005 – Steel industry veteran John Correnti and Severstal Group announced today their newly formed company, SeverCorr LLC, which will construct and operate the world's newest state-of-the-art steel mill in Lowndes County, Mississippi. The steel mill is designed to produce 1.5 million tons of high quality flat-rolled steel products for the southern United States steel market.
”We are pleased to partner with such an experienced group of industry leaders and look forward to launching the most efficient steel making operations in the United States meeting the highest quality standards for commercial and automotive applications,” said Severstal Group executive Gregory Mason.
SeverCorr’s management team will be led by John Correnti and other experienced industry executives, recognized for their ability to engineer, construct and manage these types of steel operations. Severstal, which is providing most of the equity for the project is a major global steel producer with worldwide operations.
In announcing the formation of the partnership, John Correnti commented that the decision to locate the steel mill in Lowndes County, Mississippi, was driven by the site’s proximity to the growing number of automotive producers located in the southern United States, access to low cost and reliable electric power from the TVA and the business-friendly environment in Mississippi.
"This is the next generation of steel production," Correnti said. “We are very excited to have a partner with a complementary business philosophy that includes aggressive growth, customer-focus and a return on investment for stakeholders.”
SeverCorr expects to produce hot-rolled, cold-rolled and coated steel products by third quarter 2007. Approximately 2,000 construction-related jobs will be created during the next 24 months and nearly 450 people will be employed when the production facilities are fully operational.
For further information contact:
Lada Astikas
Severstal Group
Phone: +7 (095) 5407766
Cell: +7 (095) 130 7662
Moscow, Russia
Niani Colom
Soul Fleur Communications
Phone: 662-328-0488
Columbus, Mississippi
Posted by Industrial-Manufacturing at 03:21 AM | Comments (0)
HandCrafted Homes of North Carolina Donates Over $15,000 to the American Red Cross
The American Red Cross Central North Carolina Chapter received a generous contribution from employees of homebuilder HandCrafted Homes of Henderson, N.C. The company matched the employee contribution, pushing the donation to over $15,000 to support relief efforts for hurricane victims.
HENDERSON, N.C. (PRWEB) October 4, 2005 -- Employees of HandCrafted Homes in Henderson pulled together to help support victims of recent hurricanes. HandCrafted Homes, a regional homebuilder and subsidiary of developer HHHunt, was able to raise over $7,000 for the American Red Cross through contributions from its employees and managers. HHHunt then matched the contribution, bringing the total donation to $15,282.
“This donation came in part from the employees of HandCrafted Homes and will go immediately towards relief efforts for Gulf Coast residents impacted by recent hurricanes," said Rick Norwood, branch manager for the Vance County Red Cross.
Bill Murray, general operations manger for HandCrafted Homes, was not surprised at the generous donation his company and its staff were able to collect. “This is one of the most compassionate groups of people I have ever been associated with,” Murray said of his company. “They assist those in need on a regular basis.”
“It demonstrates the types of individuals that work at HandCrafted Homes,” added Norwood. “Just like the individuals in Vance County, they’re always willing to help their neighbors, and in times of crisis, we all consider those in Louisiana, Mississippi, Texas and anyone in need to be our neighbors.”
HandCrafted Homes uses state-of-the-art technology to develop the highest quality modular solutions. The company’s unique solutions provide builders the flexibility of on-site construction and ultimately, HandCrafted Homes allows builders to construct higher quality, customized homes faster and more efficiently for their customers. For more information about HandCrafted Homes, call 877-424-4321 or visit online at www.HandCraftedHomes.com.
About The Central North Carolina Chapter of the American Red Cross
Through September, 2005, 170 families have been served through the Central North Carolina Chapter. Thus far over $137,000 has been committed for Hurricane Katrina Relief services. Over $800,000 has been raised in funds and pledges from the Central North Carolina Chapter which includes Durham, Granville, Person and Vance counties. For more information, or to donate to the Red Cross and the Disaster Relief Fund, visit www.redcross.org or call 1-800-HELP-NOW.
About HandCrafted Homes and HHHunt
Established in 1998, HandCrafted Homes has been setting the standard in modular construction by providing builders with superior customer service, state-of-the-art modular technology, and unique home designs. HandCrafted Homes is a wholly owned subsidiary of HHHunt, a major residential and commercial real estate developer. For over three decades, HHHUNT has been a recognized leader in real estate development throughout Maryland, Virginia, North Carolina, Tennessee and South Carolina.
Posted by Industrial-Manufacturing at 03:20 AM | Comments (0)
Revolutionary Nanotechnology Sealants from SealGuard USA
Painter's Nation, LLC has become the Texas Gulf Coast exclusive distributor for SealGuard USA products. From concrete to fabric SealGuard USA has the products that can protect and seal just about anything.
(PRWEB) October 4, 2005 -- Painter's Nation, LLC has become the exclusive distributor of SealGuard USA products for the Texas Gulf Coast. Our territory covers from the Houston/Galveston area down to the Corpus Christi area. We also offer these fine products through our internet store to anyone nationwide wishing to purchase SealGuard USA products.
SealGuard is the first sealant on planet earth to use nano-technology. Nanotechnology is a manufacturing technology that will make most products lighter, stronger, cleaner, less expensive and more precise, while causing the lowest environmental impact. SealGuard is an invisible impregnator, which repels water and oil-based stains with no change or alteration to the original surface. What separates SealGuard is their ability to incorporate their technologies into a variety of products, environments and applications. SealGuard can be used on all types of surfaces such as marble, granite, limestone, sandstone, brick, slate, terra-cotta, terrazzo, concrete, stucco, fabric, leather, metal, wood, boats, log homes, fishing flies and much, much more. SealGuard can be easily applied using an airless sprayer, brush, roller, or pump sprayer.
SealGuard USA offers a multitude of products including Anti-Graffiti, Multi-Use Sealers, Tile and Grout Sealers, Anti-Slip solutions, as well as Stone and Masonry Sealers. These products can serve markets including municipalities and governments, hospitals, construction, commercial services, as well as residential uses.
"We feel that the SealGuard USA will be a great fit to the Painter's Nation, LLC product lines.
SealGuard USA provides a great compliment to our current product offering." said John Wright, President of Painter's Nation, LLC. The Graffiti Bullet Proof product is a great proactive way for our customers to block the harmful effects of graffiti before it becomes a chronic problem. In addition, the Graffiti Armor and Graffiti Remover Turbo will allow customers to remove the harmful effects of graffiti. Protecting the beauty and brilliance of our worlds infra structural buildings and historical structures requires products that are extremely sensitive in cleaning natural building materials and are effective. We are proud to make available to the public one of the most revolutionary sealant products on the market today. The repellency of SealGuard is beyond compare.
Not only does SealGuard USA provide some great anti-graffiti products, but they also have some other great etching solutions and sealants. The Nev-R-Slip Anti-Slip is a great way to prevent injuries to people on a slippery surface and reduce the likelihood of medical costs. This can be applied to bathtubs and showers or where slippery surfaces have been known to cause injuries. Nev-R-Slip Anti-Slip is a safe product that can give you a non-slippery floor as well as increased protection from law suits, and reduced potential for Workers Compensation claims.
More about Multi-Use Sealer:
http://www.paintersnation.com/Multi-Use_Sealer.aspx
More about Nev-R-Slip Anti-Slip:
http://www.paintersnation.com/Nev-R-Slip_Anti-Slip.aspx
More about Graffiti Armor:
http://www.paintersnation.com/graffiti_armor.aspx
More about Graffiti Bullet Proof:
http://www.paintersnation.com/graffiti_bullet_proof.aspx
About Painter's Nation LLC:
Painter's Nation is a supplier of industrial coatings to the petro-chemical, oilfield, fleet, equipment and tanking industries. We supply independent contractors and industrial users with an easy to do business with online store. http://www.paintersnation.com
About SealGuard USA:
SealGuard USA is a microcap entrepreneurial privately owned manufacturing company. SealGuard is becoming recognized as a leader in “Green Chemistry” in the nanosealant industry. Headquarters for SealGuard USA is in Las Vegas, NV. http://www.sealguardusa.com
Posted by Industrial-Manufacturing at 03:20 AM | Comments (0)
RedVector.com Adds Interactivity to Online Courses
RedVector.com, the leading provider of online continuing education to the design and construction industry, is now using Lectora technology to add interactivity, animation and enhanced navigation to many courses.
(PRWEB) October 4, 2005 -- RedVector.com, the leading provider of online continuing education to the design and construction industry, is now using Lectora technology to add interactivity, animation and enhanced navigation to many courses.
Lectora® Publisher, created by the Trivantis Corporation in 2000, has earned a reputation as the “best of breed authoring tool available” and has rapidly become the software of choice among educators, trainers, and human resources professionals.
“RedVector can now offer interactive content that changes as users interact with the course to enhance learning and comprehension,” said Victoria Zambitio, Vice President Research and Development for RedVerctor.com. “Our new courses also share a common navigation that offers additional resources such as checkpoints and links to external resources. Users will also see some flash and sizzle from animated graphics and activities that add to the educational experience.”
“Both our individual and corporate clients tell us they are able to learn and retain important information better through online classes developed with our new Lectora Course Development Software,” said Donna Hamilton, Enterprise Accounts Director. “The interactive features of Lectora courses appeal to both our Generation X professionals who have grown up with computers, as well as those established AEC professionals who want something a little more engaging than the traditional page-turner formats.”
RedVector offers hundreds of courses for AEC professionals including architects, engineers, contractors, landscape architects, interior designers, land surveyors, building inspectors, and water and wastewater operators. Most courses are approved by appropriate state and professional boards. Users can search RedVector for courses approved for their state and profession.
New interactive Lectora courses offered by RedVector include:
• ADA Guidelines: Accessible Routes
• Ethical Decision Making for Engineers
• Fire Safety Design Basics: Means of Egress & Extinguishing Systems
• Hurricane Mitigation: Design and Construction Lessons
• Introduction to Indoor Air Quality
• Project Management Basics
• Toxic Mold Detection, Prevention, & Remediation
• Marketing Your Consulting Services
For details on these and other courses, visit http://www.RedVector.com .
About RedVector.com, Inc.
RedVector.com offers online courses to professionals involved in the design and construction industries. RedVector.com serves more than 60,000 registered users who can choose from hundreds of course titles authored by more than 100 exclusive subject-matter experts. RedVector.com is dedicated to helping professionals achieve their goals, advance their careers and enrich their lives through education. For more information, log on to www.RedVector.com or call 800-877-5159, Ext. 1520.
Posted by Industrial-Manufacturing at 03:18 AM | Comments (0)
Raleigh's Bedford at Falls River Set for 40th Annual Parade of Homes
North Carolina's largest open house is underway in in Wake County. The 40th Annual Parade of Homes features 16 new homes at Bedford at Falls River, a master-planned community in Raleigh.
Raleigh, NC (PRWEB) October 4, 2005 -- Bedford at Falls River, a traditional neighborhood development in North Raleigh, will offer a wide range of home-styles for all to visit at this year's Parade of Homes. Bedford has 16 new homes entered in what the Home Builders Association of Raleigh-Wake County describes as "North Carolina's Largest Open House," the 40th Annual Parade of Homes.
Bedford will showcase new homes from 15 of its builders, including the national award winning Charleston Collection, according to Dawn Forrest, director of marketing for Bedford's developer, Wakefield Development Company. "The list of builders also includes Orleans Homebuilders, McNeill Burbank Homes and Preservation Homes," added Forrest. Preservation Homes' artistic bungalow-style has become a Parade favorite at Bedford.
In addition, the community will showcase at least one home from Drees Homes, the Riverwalk Collection, Orleans Builders, Estate Builders, Spectrum Homes and homes from a number of the community's award-winning custom builders who make up the Bedford Builder Group. The tour begins Saturday and Sunday, October 1 & 2, and continues Friday, Saturday and Sunday, October 7 - 9, and wraps up Saturday and Sunday, October 14 – 16. Models are open from 12:00 noon to 5:00 p.m. on all dates.
For more information about the 40th annual Parade of Homes, visit the Home Builders Association of Raleigh-Wake County website at www.HBAWake.com. For more information about Bedford at Falls River call the Welcome Center at 919-792-0100 or visit online at www.BedfordTradition.com. The Welcome Center is located at 4390 Falls River Avenue.
About Bedford at Falls River
Bedford at Falls River, a Wakefield Development Company community, revives the traditional neighborhood setting and atmosphere while combining modern conveniences of today's homes. For more information about the community, please visit www.BedfordTradition.com, call 919-792-0100, or visit the Welcome Center at 4390 Falls River Ave., Raleigh, NC 27614.
About Wakefield Development Company
Wakefield Development Company is the Triangle's largest developer of residential communities, with a portfolio that includes over 14,000 home sites. In addition to the 2004 NCHBA Community of the Year, Bedford at Falls River, the company has six other communities under development across the Raleigh-Wake County market, including Wakefield Plantation, Eagle Ridge, Edgewater, Cornerstone, Delta Ridge and Twin Lakes. Wakefield has also begun development of Mackintosh on the Lake, a new 612-acre community between I-85/I-40 and Lake Mackintosh in Burlington, and will begin development of two new Raleigh communities, Renaissance Park and Twelve Oaks. For more information, call 919-556-4310, visit www.WakefieldCommunities.com, or email info @wakedev.com.
Posted by Industrial-Manufacturing at 03:18 AM | Comments (0)
October 03, 2005
ICIS Training Launches Petrochemicals Course in China Understanding the Impact of Oil Volatility on Raw Materials
ICIS training launches a beginners course to explain the petrochemical industry in non technical terms. The course will cover basic chemical chains, relationship between oil and petrochemicals, petrochemical global players and trends, future trends and regional picture, pricing & markets and basic forwards and futures.
London, (PRWEB) October 3, 2005 -- ICIS, the world’s largest information provider for the global chemical industry, launches ‘Petrochemicals – A Beginners’ Course’ in China on the 25th November 2005. To be held in Shanghai, the course is intended to give an introduction to the petrochemical industry, a sector that is still growing in China at 8-9%/year despite a recent slowdown.
During 2005, three major petrochemical complexes will have undergone start-up, boosting ethylene capacity in the country to nearly 10m ton/year. But in a background of volatile oil markets, will petrochemicals be able to compete against China’s soaring gasoline demand in sourcing its oil-derived raw materials? And will this impact China’s future ability to export textiles, electronic equipment and other consumer products?
'Petrochemicals – A Beginners’ Course' explains the fundamental relationship between oil products and petrochemicals, and then how petrochemicals are used in the many everyday consumer products which China manufactures for local demand and export. The petrochemical business and fundamentals that drive markets are covered, providing delegates with the tools to be able to apply their knowledge to the bigger picture.
“ICIS training courses bring clarity and focus to often difficult concepts and ideas,” commented Christopher Flook, ICIS training Publisher. “Our training seminars are designed for newcomers to the industry, analysts and service providers, as well as product specialists who want to refresh their knowledge of the big picture. Delegates will learn the basics from both business and technical standpoints and how oil and petrochemicals impact one another as they are increasingly used in consumer production,” he said.
ICIS training will run this course at The Four Seasons Hotel, Shanghai on the 25th November 2005. Other successful events have been held in Amsterdam, Singapore and Dubai. Visit http://www.icis.com/training for further details and registration information.
To register for the seminar, contact Sarah Barnes
tel: +44 (0) 20 8652 3233, fax: +44 (0) 20 8652 3482
To discuss promotional opportunities and for further information, contact Sheila Seow, tel: +65 6780 4395
About ICIS:
ICIS is the world’s largest information provider for the chemical industry. We aim to help chemical and oil companies worldwide increase revenues and profits by providing high-quality, business-critical information, sales leads and brand positioning. ICIS provides: independent chemical and oil price reporting from ICIS-LOR; ICIS news, the real-time news service as well as facts and analysis behind the news.
ICIS publishes market leading regional weekly publications: Asian Chemical News, European Chemical News and Chemical Market Reporter. See ICIS.com for the latest industry TV news broadcasts; key business contacts and data in Who’s Who in World Petrochemicals and Plastics and the OPD Chemical Buyers Directory. ICIS also runs numerous topical industry conferences and training courses.
ICIS is part of Reed Business Information (RBI), a division of Reed Elsevier plc, the world’s leading publisher and information provider. RBI publishes over 100 market leading publications, directories and online services, and organizes many industry conferences and awards. The RBI portfolio includes Computer Weekly, Caterer & Hotelkeeper, Commercial Motor, Community Care, Estates Gazette, Farmers Weekly, Flight International, New Scientist, Travel Weekly, Totaljobs.com, Caterer.com, CWJobs, Estates Gazette Interactive (EGi), ATI (Air Transport Intelligence), ICIS, Kellysearch, Kompass UK, and Bankers’ Almanac. For a full listing visit http://www.reedbusiness.co.uk ;
Posted by Industrial-Manufacturing at 01:13 AM | Comments (0)
Lights Go Out for Kissimmee's Historic Power Plant
The original section of the Roy E. Hansel Generating Station was decommissioned on Sept. 30 after 104 years of continuous service.
Kissimmee, FL (PRWEB) October 2, 2005 -- The eight diesel generators that served generations of Kissimmee residents fell silent Sept. 30 after an official decommissioning ceremony hosted by Kissimmee Utility Authority (KUA).
Built on the northwestern shore of Lake Tohopekaliga in 1901, the Roy E. Hansel Generating Station produced electricity continuously for 104 years.
"Today is this plant's last in commissioned service," KUA president and general manager Jim Welsh said at the ceremony. "For 104 years she has performed with remarkable distinction."
At just after 12:00 noon an electrical switch was pulled which powered down the generators -- forever. The decommissioning honors went to Welsh, KUA chairman Nancy Gemskie and two daughters of Roy Hansel in whom the plant is named.
"This plant has built an extraordinary record of achievement because it possessed one exceptional asset: generations of operators who were willing to do what it took to keep the lights on in Kissimmee," said Welsh. "And for that, they deserve our profound thanks."
The KUA board of directors authorized the decommissioning of the units in February because they were no longer economical to operate. The historic building and adjacent property will be returned to the city of Kissimmee for future development.
A separate 50-megawatt (MW) combined cycle plant and related facilities will continue to operate at the southern end of the Hansel site until its scheduled retirement date in 2013.
Founded in 1901, KUA (www.kua.com) is Florida's sixth largest community-owned utility providing electric and telecommunication services to 170,000 residents in five Central Florida counties.
Posted by Industrial-Manufacturing at 01:12 AM | Comments (0)
Structural Materials Inc. Makes MSDS and Tech Data Easy to Find
SMI launches a new website (www.SMIonline.com) to enable customers to find MSDS and Tech Data sheet information to print out. Customers can contact our product specialsts for all their questions and can get on our free delivery schedule and/or print out a credit application.
Fargo, ND (PRWEB) October 2, 2005 -- Find MSDS and Tech Data information for your next construction project.
SMI added a website (www.SMIonline.com) to compliment our product specialists and to make it easy for our customers to print out sensitive technical information for their next project.
Our customers need this information on a timely basis, and the best way to achieve that is to enable them to view it over the web and to print out the MSDS and technical sheets themselves at their location, apposed to our product specialist mailing or faxing to the customers destination.
Basically you go to our site and hover on MSDS/Tech Data link, find the division, go to the product page and print either sheet or go to the manufacturer’s sites for more information.
Contractors will find quick reference estimating guides for areas and metric/standard conversions. SMI also includes articles on hot topics in the industry so contractors are able to make an educated decision. Contractors can sign up for upcoming training events put on by SMI and manufacturers reps and their will be information on new products coming to the industry.
About Structural Materials Inc.
Since 1957 Structural Materials has been supplying the Upper Midwest with quality concrete and masonry supplies and equipment. Our goal is to provide quality products at a fair price with fast, friendly service. We have a trained sales staff with the experience to provide you with professional assistance on all your construction supply needs.
Contact:
George Blank
Structural Materials Inc.
1.800.437.4776
http://www.smionline.com
Posted by Industrial-Manufacturing at 01:11 AM | Comments (0)
Felco Industries, LLC Announces the Launching of Its New and Improved Website at Felco-ind.com
Felco Industries, innovator and pioneer in the utility attachment industry, is launching a new website: Felco-ind.com. Felco fabricates excavator and backhoe attachments and conveyors for the construction industry.
(PRWEB) October 1, 2005 -- Felco Industries, innovator and pioneer in the utility attachment industry, is launching a new website: www.felco-ind.com. Felco fabricates excavator and backhoe attachments and conveyors for the construction industry. In continuing with Felco?s philosophy of providing exceptional customer service, its new website contains even more information to better serve its dealers and contractors.
Felco?s website has up-to-date product information, including new and custom fabricated products as well as current Felco Manufacturer?s Suggested Retail Price lists for all product lines. Contractors and dealers can fill out an online quote form to receive an exact quote including shipping and handling fees.
The website also contains specifications, owner?s manuals, parts lists, and installation and service instructions for Felco product lines. The information is available in Adobe PDF to make it easy to print or download.
Felco is celebrating the launching of www.felco-ind.com, so visit the new site and be prepared to save time and money.
Posted by Industrial-Manufacturing at 01:10 AM | Comments (0)
Pet Resorts with a Touch of Glass
Peter & Macs Recreational Resort for Pets (Scottsdale, AZ) has selected Glass Block Innovations, Inc. to provide glass block product for their new facility in Colorado.
Phoenix, AZ (PRWEB) October 2, 2005 -- Peter & Macs Recreational Resort for Pets (Scottsdale, AZ) has selected Glass Block Innovations, Inc. to provide glass block product for their new facility in Colorado.
Peter & Macs Recreational Resort for Pets offers an ultimate day care and lodging service for pets and their owners by providing them with a facility that includes a deluxe activity center, swimming pool, grooming salon and a bakery with various freshly baked treats. Services also include a Veterinarian Advisory Board and a live-in manager to ensure care at all times.
Peter & Macs Recreational Resort for Pets will elevate leadership in pet care and lodging, as their kennels will offer individuality with the addition of Glass Block Innovations’ partitions that utilize an innovative interlocking vinyl joint system, insuring a quality and durable system that allows for the comfort of the pets.
Information about Peter & Macs Recreational Resort for Pets is available at www.petemac.com. More information about Glass Block Innovations is available at http://www.glassblockinnovations.com.
Posted by Industrial-Manufacturing at 01:10 AM | Comments (0)