« Thousands Now Sell Their Property Notes And Trust Deeds Who Never Knew They Could | Main | Construction Recruiter Reveals Secret to Hiring Better Employees »
December 05, 2005
Call For Earthquake Resistant Buildings
In light of recent events in Pakistan, the Director of Reid Steel, Rollo Reid, has written an article on the company’s website about why buildings fail during earthquakes and how Reid Steel has been able to overcome this problem.
(PRWEB) December 3, 2005 -- In light of recent events in Pakistan, Rollo Reid, Director of Reid Steel, has been looking at the need for earthquake resistant buildings. Mr Reid has written an article on the company’s website about why buildings fail during earthquakes and how companies, like Reid Steel, have been able to overcome this problem.
All buildings can support their own weight plus a little bit more. Even badly built buildings can resist some up-and-down movement caused by earthquakes. However, it is the side-to-side movement that causes buildings to collapse and this is the issue that needs to be addressed.
There are many different methods to use but the general rule is; the lighter the building, the less the loads are. Structures should be supported to resist sideways movement by using diagonal bracing or moment resisting framing. Larger buildings should be isolated from the floor using dampers or bearings, but this can be a difficult and expensive process. Larger structures in earthquake areas should not be built too high compared to their width.
Nothing is guaranteed when it comes to earthquake resistant buildings but there are certain methods which can give buildings the best chance of survival and in turn save many lives and livelihoods. Mr Reid said, “We are not ambulance chasers. Every time we see the results of earthquakes, with numerous people, mostly poor people, killed or bereaved, we cannot help but wish that buildings were better built. If we can help in any way we are always ready to do so. The information in the article shows builders, developers, government agencies and anyone else how to do it."
To view the full article please visit:
http://www.reidsteel.co.uk/information/earthquake_resistant_building.htm
Notes for editors:
Reid Steel design and make every form of structural steelwork from light architectural steel to the heaviest industrial plant including Industrial Buildings, Aircraft Hangars, Sports Stadia, Warehouses and Bridges. They also provide cladding, insulation, overhead cranes, gantries, roller shutter doors, electro- mechanical hangar doors, windows, ventilation and all the accessories needed for the complete structure. For more information please visit: http://www.reidsteel.co.uk
For more information please contact:
Rollo Reid C.Eng FIstrucE MICE FinstD
John Reid & Sons Ltd
Strucsteel House
6-106 Reid Street
Christchurch
Dorset
BH23 2BT
Tel: +44 (0)1202 483333 Fax: +44 (0)1202 470103
Ref: RS011205
Posted by Industrial-Manufacturing at December 5, 2005 01:32 AM