Industrial News

« November 2005 | Main | January 2006 »

December 29, 2005

The Village at Wild Dunes Sells $45 Million in Condominums in Hours

The Village at Wild Dunes estimates $45 million in sales for its newly-unveiled condominiums at Wild Dunes® Resort, a year-round resort located just 30 minutes from downtown Charleston, during its one-day, private Selection Confirmation Event at the Boardwalk Inn – making it one of the largest one-day real estate sales in Charleston area history. Initial sales are a result of a priority, limited offering to current Wild Dunes property owners.

(PRWEB) December 29, 2005 -- The Village at Wild Dunes estimates $45 million in sales for its newly-unveiled condominiums at Wild Dunes® Resort, a year-round resort located just 30 minutes from downtown Charleston, during its one-day, private Selection Confirmation Event at the Boardwalk Inn – making it one of the largest one-day real estate sales in Charleston area history. Initial sales are a result of a priority, limited offering to current Wild Dunes property owners.

“The initial interest from Wild Dunes property owners was beyond our expectations,” said Terri Haack, Vice-President and Managing Director of Wild Dunes. “We will begin a national marketing campaign to the public just after the start of the New Year and expect the demand to be strong. Condominiums in a full service, oceanfront resort are scarce, if not non-existent.” Haack encourages interested parties to call immediately, as it is anticipated that the few remaining condominiums will not be available for long.

Set on eight acres in the center of the 1,600-acre Wild Dunes Resort, The Village at Wild Dunes will offer 254 condominiums designed in mid-rise buildings set around a charming tree-lined central plaza. The Resort is currently comprised of 365 resort homes and villas along with the 93-room Boardwalk Inn. The Village at Wild Dunes will be the new center of activity for the resort, bringing more than 14,000 square feet of retail space and restaurants and 8,500 square feet for an expanded spa and fitness center along with a swimming pool with poolside bar and café.

Nearby the new condominiums, shopping and recreation facilities will be Wild Dunes, Sweetgrass Pavilion – a brand new 10,000 square foot, state-of-the-art meeting complex.

“Once complete, The Village at Wild Dunes will be one part of a multi-million dollar addition to the Resort,” said John Steele, Vice President of Development for The Village at Wild Dunes. “The award-winning Resort has been a destination for families and businesses world-wide and we are now able to offer additional units for future generations to enjoy our recreation, sports and event facilities.”

Owners and guests of the condominiums, which range in size from studios to three-bedroom units, including some penthouses, will enjoy services and amenities such as a 24-hour concierge service, full maid service and in-room dining in addition to the existing resort services including two Tom Fazio designed championship-caliber golf courses, an award-winning 17-court tennis center, shopping and dining, and a host of recreation options in an exquisite coastal setting with 2.5 miles of beach and miles of trails for walking, biking and jogging.

For more information on The Village at Wild Dunes, please visit www.wilddunesvillage.com or call 888-456-3221

About Wild Dunes Resort
The Village at Wild Dunes Resort is being developed by Lowe Destination Development (LDD), a subsidiary of Los Angeles-based Lowe Enterprises which also developed the Boardwalk Inn at Wild Dunes Resort. LDD is developing in excess of $2 billion of hospitality properties nationwide, including Terranea Resort in Rancho Palos Verdes, CA the 3,000-acre Suncadia project near Roslyn, WA and Stowe Mountain Lodge in Stowe, VT. For additional information, visit www.lowedestinationdevelopment.com.

Wild Dunes is one of 34 independent, upscale and luxury hotels, resorts and golf clubs in the United States managed by Destination Hotels & Resorts, a subsidiary of Lowe Enterprises and the fifth largest independent hospitality management company in the country. The company, headquartered in suburban Denver, CO, features a portfolio of more than 8,000 guest rooms, 15 golf courses and 10 full-service spas. Destination Hotels & Resorts properties are located in key metropolitan and resort markets including New York, San Francisco, Washington, D.C., Chicago, Denver, Dallas, Boston, San Diego, Aspen, Austin, Phoenix, Palm Springs, Jackson Hole, Maui and Lake Tahoe. For more information on the properties in the Destination Hotels & Resorts collection, please visit www.destinationhotels.com.

Posted by Industrial-Manufacturing at 02:42 AM | Comments (0)

BuildTopia to Unveil BTBuilder™ v5.4 with Greater Reporting Capabilities and Real-time PDA Access at the 2006 International Builders' Show, Booth W4349

With the creation of On-Demand Reporting™, BuildTopia users can easily create and store complex management reports, while BTMobile™ allows customers with PDA availability access to real-time information in the field.

Potomac, MD (PRWEB) December 29, 2005 -- BuildTopia, Inc., the industry’s leading provider of web-based, on-demand residential construction management applications, will unveil its latest release of its next-generation BTBuilder™ software at the 2006 International Builders’ Show, booth W4349. BTBuilder v5.4 now includes On-Demand Reporting™, a proprietary reporting solution that allows quick and easy creation of business management information, and BTMobile™ which provides wireless access to BTBuilder’s vital functions for in-the-field personnel.

On-Demand Reporting was developed to enhance the reporting function currently offered to BuildTopia users. On-Demand Reporting is simple to use – with the help of a “wizard” you select an area of your building business for which to generate a report, data fields to report on, whether to summarize and group your data, and how to filter and export it. In a quick and organized fashion, you’ve immediately created richly formatted spreadsheets at the touch of a button. The results are management reports that save valuable company time by gathering and distributing vital information to make BuildTopia’s customers more profitable and competitive.

There are over 40 powerful management reports that come pre-packaged with On-Demand Reporting. For example: Projected Lot Profitability Report -- summarizes the cost, price and margin for the base house and options on a specific lot; Option Margin Report -- details price, cost and margin for all options offered in a project; Defect Analysis -- provides details on construction defects reported, number of occurrences, defect detail, source, and average time to resolve. On-Demand Reporting is available now to all current BuildTopia customers and was developed by a team of in-house software experts.

“You know the saying ‘information is power?’ Our new On-Demand Reporting delivers. These new reports and tools provide BuildTopia customers powerful, compelling information about their business, helping them make decisions from cost cutting to discovering profitable options that should be exploited. In a highly competitive building market, these reports will ensure builders are operating as efficiently as possible,” explains Beau Engman, CEO of BuildTopia, Inc.

BTMobile brings in-house access and functionality to the palm of your hand. With BTMobile, field personnel can access critical data in real-time on smartphones while working out on the site. BTMobile allows users to view option selections and change orders, adjust construction schedules, approve or reassign purchase orders, and follow-up with trade partners to reduce mistakes while finishing the job on time.

BTMobile is exclusive to BuildTopia and was designed to work on a selected group of PDAs and PDA-phones, such as BlackBerry or Treō. The service is available now with the BTBuilder product.

About BuildTopia, Inc.
Based in Potomac, MD and founded in 1999, BuildTopia is the leading provider of web-based, on-demand construction management applications for residential homebuilders. The company’s vision is to be more than a software product -- they aim to provide collaborative construction management solutions by delivering the most advanced suite of eBusiness applications for the homebuilding industry. There are over 1,000 companies in the United States using BuildTopia to run their operations. For more information about BuildTopia, visit the company’s web site at www.buildtopia.com or call 866.209.3724.

Posted by Industrial-Manufacturing at 02:41 AM | Comments (0)

December 28, 2005

American Clay Earth Plaster '06 Certification Worshops Resume; Waitlisted and New Applicants Line Up to Work with a Declared "Best Product of '05"

To meet the growing need for qualified experts in the field of clay plaster installation, American Clay (Natural) Earth Plaster is offering more "Train the Trainer" certification programs, as well as other general workshops for both professionals and do-it-yourself renovators (DIYers). In October, American Clay - which was named by both Architectural Record and BuilderNews as a Best Product of 2005 - held their first such program, trying to hold the 3-day class to 15 participants. But word spread and the re-sulting class grew to 38 professional plasterers from across 15 states, with a waiting list for the next program. The 2006 Train the Trainer classes, held at the company’s corporate offices in Albuquerque, NM, are: --February 22-24, 2006 --September 27-29, 2006

Albuquerque, NM (December, 2005) – To meet the growing need for qualified experts in the field of clay plaster installation, American Clay Earth Plaster is offering more Train the Trainer certification programs, as well as other general workshops for both professionals and do-it-yourself renovators (DIYers). In October, American Clay - which was named by both Architectural Record and BuilderNews as a best product of 2005 - held their first such program, trying to hold the 3-day class to 15 participants. But word spread and the resulting class grew to 38 professional plasterers from across 15 states, with a waiting list for the next program. The 2006 Train the Trainer classes, held at the company’s corporate offices in Albuquerque, NM, are:
• February 22-24, 2006
• September 27-29, 2006

American Clay Earth Plaster, the natural finish for interior walls and ceilings, is responding to the increased builder and consumer demand for natural plaster installation by ensuring that all its providers and distributors become certified experts in the field. By being proactive – which already has helped American Clay cross the great divide from the more limited ‘green’ market into a larger general-use market, growing 400% in the last 12 months – the company hopes trainees will help spread the word and provide confidence to home builders and buyers that clay plaster is the best option for their interiors.

The idea appears to be working, as the plasterers in October’s class came from many states: AZ, CA, CO, GA, IL, MD, MI, MT, NM, OR, PA, TX, WY, WA and WI. Across the three-day period, they learned to manipulate the clay in a variety of circumstances and with a wide range of creative ideas. The certification involves complete understanding of clay plaster textures, repairs, sealing, blending, corners, new product application techniques, substrate variables, mixing colors and recoating.

In November, American Clay introduced new application systems called “Dos Manos Classic” and “Dos Manos Pro System”, which augment the “Traditional System”. Both Dos Manos systems deliver a milestone in earth plaster application by eliminating the Primer step, greatly cutting labor costs. Additionally, Dos Manos Pro primarily targets major homebuilders, as preparation takes training and hardens faster than the traditional system. All three methods will be taught at the Train the Trainer program.

Additional workshops for different levels of knowledge are also available through American Clay or through some of their distributors. Please check www.americanclay.com for dates, locations, contact information and pricing. Two kinds of workshops are offered:
--a day-long workshop for professional and serious do-it-yourself plasterers;
--a half-day workshop for do-it-yourself plasterers.
American Clay also produced a 13-minute instructional video (VHS/DVD).

ABOUT AMERICAN CLAY ENTERPRISES
American Clay – The Original Earth Plaster – is an award-winning green formulation of clays and aggregates offering a durable, natural and elegant option for interior wall finishes in a variety of hues and textures. The original Loma and the even smoother Porcelina formulation – which provides a polished, more Venetian-like veneer - are easily applied over properly primed substrates. No off-gassing nor inherent waste on-site; is non-flammable; resists mold; absorbs sound; breathes with temperature and humidity; gives additional masonry mass in rooms and is easily repairable.

American Clay Enterprises, Inc., is based in Albuquerque, NM, and its product is patent pending. The company offers product and different level workshops at its New Mexico location. Product and workshops are also available through the growing number of retailers and distributors across the U.S. Their website, www.americanclay.com, offers information on locations, ordering, technical specifications, product application and additional resources and links.

Posted by Industrial-Manufacturing at 10:10 PM | Comments (0)

2006: A Ticking Time Bomb? 3-2-1 Blastoff

Let the celebration begin. Hayley Mills, Sally Fields and Patty Duke turn 60 this year. So do Presidents Bush and Clinton, Donald Trump and Cher. Joining them will be the front edge of millions of aging Boomers who are anticipated to retire or change careers in unprecedented numbers. This is the leading edge of a series of events and workforce trends that author-workforce expert Ira S. Wolfe has called The Perfect Labor Storm.

Lancaster, PA (PRWEB) December 28, 2005 -- Let the celebration begin. Hayley Mills, Sally Fields and Patty Duke turn 60 this year. So do Presidents Bush and Clinton, Donald Trump and Cher. Joining them will be the front edge of millions of aging Boomers who are anticipated to retire or change careers in unprecedented numbers. This is the leading edge of a series of events and workforce trends that author-workforce expert Ira S. Wolfe has called The Perfect Labor Storm.

Wolfe, founder and president of Success Performance Solutions, recalls six years ago when he first warned about skilled worker shortages. “I received many comments like “interesting” and “thought-provoking,” he recalls, “but many executives and business owners chose to ignore the warning.” Today, stories about skilled worker shortages is front-page news and time to fill open critical positions is growing longer and longer. “The Perfect Labor Storm,” Wolfe contends, “is no longer just a forecast for the future but an imminent threat for the present.”

Wolfe offers highlights of a few stories he believes will dominate the news in 2006 and beyond.

A Shrinking Workforce
The number of U.S. workers between ages 55 and 64 will grow 51 percent to 25 million by 2012, meaning the fastest-growing portion of the work force is the one at most risk of retiring soon. At the same time, the number of workers between ages 35 and 44 is expected to shrink by 7 percent.

New Skills Required
While many workers continue to use skills learned in an Industrial age, consumer demands have changed. Jobs now require skills for service and knowledge, not manual labor. In 1955, 40.5 percent of the U.S. workforce was engaging in manufacturing, construction, and mining. By the end of 2005, those industries employed only 15.8 percent of the workforce. Service-producing industry sent paychecks to 41.8 percent of workers.

Is Education The Answer?
Many point to better education as the solution. But education has its own problems. Today's workforce is the most educated in the world. That is all about to change. U.S. high school students are getting their lunches eaten when it comes to math and science scores compared to the most advanced economies of Europe and Asia.

No Industry Left Behind
Nearly every industry is predicting severe employee shortages, including manufacturing. Despite over 2 million layoffs, 500,000 vacancies exist for manufacturing jobs. Why? The available worker, including the employed, doesn’t have the right skills. The same forecast holds for healthcare, construction and technology.

Ticking time bombs: health care and pensions

For the first time in history retirees are living longer after retirements then they worked for the company or paid into social security. Many organizations including the government are facing huge funding shortfalls. The rules about retirement haven’t kept up with life expectancy.

As a result, public pension and health benefits for the elderly are on track to double while at the same time the old-age dependency ratio (nonworking older person per workers) will double.

Living Longer Costs Money

The health care consumption level of a 70-year-old far exceeds the consumption level of a 30 year old. By one estimate, the average elderly American consumes 37 percent more than the average worker.

As a result, Americans will be expected to pay more for their own health care and more for their dependents through more out-of-pocket payments and increased tax bills required to fund public supported health care.

Consumer-Driven Health Care

Shifting responsibility for health care to the consumer may be the right thing to do but employers and the government are asking a lot when lay people are expected to shop for a provider, decide when to seek care, wait weeks or months to get an appointment, juggle the appointment time with the demands of working, and navigate a complex system of bills and payments.

At least 77 million people in the U.S. -- or two out of every five adults -- have a hard time paying for medical bills or have accrued debt as a result of health care expenses. Two-thirds of people, which includes many workers, with a medical bill or debt trouble go without care because of cost. Meanwhile their health deteriorates. Minor ailments become severe and chronic conditions evolve into acute emergencies.

More than Pocket Change
Losing experienced workers is only part of the problem. Replacing them comes with a high cost. At a time when the cost of doing business is rising and profits are squeezed, the average "cost-to-hire" and "time-to-fill" in 2005 was $7,123 and 37 days, respectively. The number goes up exponentially when recruiting and hiring knowledge workers. (Source: 2005 SHRM Human Capital Benchmarking Study)

Wolfe says, “this combination of an aging population and a shrinking workforce will increase the pressure to reduce pensions, delay retirement, increase outsourcing and open up immigration.”

For more workforce facts and demographic trends, visit http://www.perfectlaborstorm.com.

Posted by Industrial-Manufacturing at 10:09 PM | Comments (0)

ETAP Intelligent Load Shedding Deployed at One of Indonesia’s Largest Copper-Gold Mines

PT Newmont Nusa Tenggara uses the ETAP enterprise solution to monitor, control and optimize its electrical power generation and transmission.

(PRWEB) December 28, 2005 -- Operation Technology, Inc. (OTI) has announced that PT Newmont Nusa Tenggara (PTNNT), operator of one of Indonesia’s largest copper-gold mines, has successfully deployed the ETAP Real-Time enterprise power system solution to reduce production losses due to faults caused by a variety of environmental disturbances. In addition, PTNNT is using ETAP Real-Time to monitor, control and optimize power generation and transmission at its facilities throughout Indonesia’s Sumbawa island.

PTNNT’s installation of ETAP Real-Time employs two primary products: ETAP Intelligent Load Shedding (ILS) and ETAP Power System Monitoring & Simulation (PSMS). Together, these products provide PTNNT with a fully integrated system to optimize electrical power management, resulting in lower generation cost and fewer process time losses due to unnecessary load tripping.

For this project, the heart of ETAP Real-Time is ILS, an advanced product that uses artificial intelligence to dynamically determine the optimal system response to a variety of system changes and disturbances. ILS evaluates electrical and physical parameters, network topology, control logics and system operating conditions (loading, generation, etc.) to determine the best load shedding priority, based on the type and location of the disturbances. ILS provides faster execution of load shedding, as compared to conventional frequency relays, further reducing the load relief requirements.

ETAP Real-Time has been operating at PTNNT for more than six months. According to Ilyas Yamin, GF Power and T&D Maintenance Engineer for PTNNT, ETAP ILS is the most intelligent load shedding system available compared with any other products on the market.

The development of ETAP ILS was a major defining milestone for OTI, stated Dr. Farrokh Shokooh, President and CEO of OTI. “We have developed many new state-of-the-art products in our 20-year history, but ETAP Intelligent Load Shedding stands out as one of our greatest achievements,” Shokooh adds. “ILS has broken new ground in power management technology by providing the intelligence and speed required to minimize the detrimental effects of system disturbances. We are extremely proud to see ETAP ILS in action.”

About Operation Technology, Inc.
Operation Technology, Inc. (OTI) is the developer of the ETAP enterprise solution for analyzing, simulating and optimizing power systems. OTI is ISO 9001 certified, covering all activities related to design, development, production and support of ETAP products. For more information, visit etap.com.

Posted by Industrial-Manufacturing at 10:08 PM | Comments (0)

Rebound Theory Rebounding--Isostatic Rebound Theory an Error in Geological Interpretation

For more than one hundred years geologists have been deluded by the Isostatic Rebound Theory. The reverse is true. The land is not rising but rather the sea is retreating from shorelines worldwide. Falling sea level gave rise to the erroneous theory of Isostatic Rebound. Sea level datum is a myth there is no such thing.

(PRWEB) December 21, 2005 -- In his new book "THE MYSTERIOUS RECEDING SEAS" Richard Guy puts forward conclusive proof that our planet earth is expanding. He concludes that the expansion process makes seas recede from shorelines worldwide. Guy states that sea level datum is the misleading factor in the isostatic rebound theory.

Scientists have misread what is really occurring on earth because sea level has always been accepted as a constant datum. The truth is that sea levels have been ebbing lower and lower and retreating from shorelines, over millions of years, as our earth expands. Guy shows in his book why early civilizations evolved in high mountains: that was the only land they had available in pre-history. He cites biblical references from Noah and the Ark to the Exodus showing how sea levels played a major part in the development of civilizations. All ancient civilizations evolved in high locations around the world. This fact, and the real reason, has never been addressed by historians. Guy states that this is because sea level, through the ages, has always been accepted as a constant. On the contrary it is the variable in the equation of earth expansion and gave rise to the erroneous theory of isostatic rebound.

Guy puts forward copious examples of the seas recession around the world. The proof of the receding seas lies in historical research. Time alone holds the element of proof of receding seas.

Guy is a structural engineer and has built docks, airports, highways and ports on lands that were left behind by the receding seas. His experience as an engineer is worldwide. His books are available on his web page at: www.widemargin2000.com.

Posted by Industrial-Manufacturing at 10:06 PM | Comments (0)

December 27, 2005

Trial Court Dismisses New York Labor Law Suit in 20-Foot Fall From Ladder Resulting in Brain Injury

In a recent case involving millions in potential damages, an employee sued his employer alleging that he was entitled to protection under New York's Labor Law. The employee had fallen off a 20-foot ladder, and suffered severe injuries, including brain damage. TELS attorneys represented the employer and, on motion for summary judgment, were able to demonstrate to the Supreme Court of the State of New York (County of Nassau) that the employee was involved in routine maintenance. Because he was not making substantial changes to the building, he was not entitled to extraordinary protections under New York's Labor Law. The Court agreed, and dismissed the entire case with prejudice. While open to interpretation, this case and others like it may demonstrate a trend towards a narrowing, more restrictive view of the Labor Law.

HAWTHORNE, NY (PRWEB) December 27, 2005 -- TRAUB EGLIN LIEBERMAN STRAUS LLP (TELS) is pleased to announce that the Supreme Court of the State of New York, County of Nassau dismissed the case against the firm's client in its entirety with prejudice. The case was significant in that it involved multi-million dollar claims arising under New York's Labor Law. The Court held that an employee's fall from a ladder, which prompted the lawsuit in the first place, occurred during "routine maintenance" and, as such, not subject to extraordinary protections under New York's Labor Law.

The defendant in this case was Montauk Properties, owner of a shopping center which included a store that had been vacant for approximately 15 years. Montauk Properties retained Regent Management to work as the property manager for the development.

One of Regent's employees was trying to stuff small pieces of insulation into three small cracks in the wall of the vacant store. These pieces of insulation were about the size of a standard Letter-size piece of paper. Neighboring tenants had requested the insulation, since birds were getting into their store from cracks in the wall.

On the very same day, several Regent employees were working in the basement of the store dismantling a boiler. Only six months before, the interior sheetrock walls of the store had been removed.

The Regent employee used a 20 foot extension ladder to install these paper-size pieces of insulation. He placed the ladder against the wall below a crack near the ceiling. After ascending the ladder, the bottom suddenly slid away, causing the employee to fall nearly 20 feet, sustaining severe injuries and brain damage.

The employee that fell eventually sued Montauk Properties, asserting violations of New York State Labor Law §240(1), §241(6) and §200, as well as common law negligence. Upon closer examination of Regent's liability coverage, Montauk qualified as an additional insured. Montauk then commenced a third-party action against Regent seeking contractual indemnification for any judgment above the carrier's policy limit, which was $1 million.

Attorneys Robert Leff and Denis Farrell of TELS were brought in to represent Regent Properties, and immediately began to focus discovery to show that the plaintiff was engaged in “routine maintenance,” and that his activities were otherwise unconnected to the other alleged alteration/renovation activities. New York Labor Law only applies to the “erection, demolition, repairing, altering, painting, cleaning or pointing of a building or structure.” The Labor Law does not apply to “routine maintenance” activities.

At the close of discovery, TELS moved for summary judgment on behalf of the third-party defendant Regent, seeking dismissal of the entire case. Mr. Leff and Mr. Farrell argued that the plaintiff was engaged in “routine maintenance” and as such, the protection of the Labor Law did not apply. The Plaintiff cross-moved for summary judgment arguing that plaintiff’s activities were part of a larger renovation project that included “gutting” the store and removing the boiler.

While the motion was pending, the plaintiff made a policy limit demand from Regent's insurance carrier, and sought additional funds from Montauk’s primary insurance carrier. Montauk's insurer demanded that Regent's insurance carrier settle the matter within its policy limit.

In the end, the trial Court granted Regent’s motion dismissing the case in its entirety. In dismissing the case, the Court noted that the Labor Law only applies to the “erection, demolition, repairing, altering, painting, cleaning or pointing of a building or structure.” The Court determined that based on the evidence submitted, the plaintiff was not engaged in any of these activities but was performing “routine maintenance.”

The Court held that an application of a small amount of insulation into a space with one’s hands is not a significant physical change to the building’s configuration or composition so as to constitute an alteration under the Labor Law. As to the plaintiff’s argument that his activities were part of a larger renovation project, to the extent the store had been “gutted,” that had occurred over six months prior to the accident and, thus, had no connection to plaintiff’s activities on that day.

In consideration of the boiler work going on, the Court also ruled there was no evidence that the dismantling of the boiler constituted an alteration or was otherwise connected to plaintiff’s work on the day of the incident. Accordingly, the Court found no connection between the alleged “larger” alteration project and the plaintiff’s activities on the day of the accident. The Labor Law §241(6) claim was similarly dismissed as the plaintiff was not engaged in “construction, demolition or excavation.” The Labor Law §200 and negligence claims were also dismissed as there was no evidence that Montauk supervised or controlled the plaintiff’s work nor created the alleged dangerous condition.

The decision is encouraging in that it arguably demonstrates that the trend of restricting the reach of the Labor Law as set forth in recent decisions of the New York State Court of Appeals is having an impact at the trial level. In appropriate cases, TELS believes summary judgment motions should be made as such motions not only force a plaintiff to lay bare their proof and thus enhance settlement positions, but the motions can result in a complete dismissal in what may otherwise be a policy limits case.

The case was James v. Montauk Properties, LLC., et ano. (Court Index No. 6558/04)

TELS congratulates Robert Leff and Denis Farrell for their diligent work on this case. For more information on Mr. Leff, a partner with TELS, please visit:

http://www.tels.com/profiles/robertleff/

And for additional background on Mr. Farrell, an associate with TELS, please click on:

http://www.tels.com/profiles/denisfarrell/

ABOUT TELS

TRAUB EGLIN LIEBERMAN STRAUS LLP (TELS) has achieved a national reputation for excellence in legal representation. Our philosophy is to provide quality legal representation in an expeditious and efficient manner. Our emphasis on client service, as well as our reputation in the legal community, has served our clients and the firm well. TELS has been recognized by many, including Martindale-Hubbell, for outstanding legal ability and ethical standards. For more information, visit us online at www.tels.com.

Posted by Industrial-Manufacturing at 03:23 AM | Comments (0)

Reedrill Teams Up with Sunrise Equipment Company

Reedrill is proud to announce that Sunrise Equipment Company is the new distributor for Reedrill bucket truck & digger derrick products, bringing the added value of experienced, responsive support to customers.

Canton, OH (PRWEB) December 27, 2005 -- Reedrill is proud to announce that Sunrise Equipment Company is the new distributor for Reedrill products, bringing the added value of experienced, responsive support to customers. Whether you’re purchasing, renting or having your equipment serviced, Sunrise Equipment Company is a name synonymous with value in heavy equipment.

The Sunrise Equipment Company is a third generation family owned business. Since 1967 Sunrise has been a leader in powerline, utility, municipal, and contractor's equipment and has had a successful business history marked by growth and longevity. The reputation for providing the industry’s best product support, coupled with quality Reedrill equipment, Sunrise Equipment Company is now uniquely qualified to meet all of your drilling needs.

Reedrill President Alan Walker said, “We are excited about the new Reedrill - Sunrise Equipment team. This is a dynamic combination of
product and support services for drillers.” Sunrise Equipment Company President Ken Joseph adds, “We are equally excited about this partnership with Reedrill. As we focus on the needs of our customers, we look to partner with many existing as well as new customers in helping them complete their jobs more efficiently and therefore, more profitably. Since we already have a strong presence in the Aerial Bucket and Digger Derrick market, it is the perfect fit to add Reedrill equipment to our product line -- the best and most efficient pressure drills on the market.”

Posted by Industrial-Manufacturing at 03:22 AM | Comments (0)

Cary Tantlinger Joins Antech Corporation

David Roher, CEO of Antech Corporation, has announced the appointment of Cary Tantlinger, to the management team at Antech Corporation, in Tucson, Arizona

(PRWEB) December 27, 2005 -- Antech Corporation specializes in the design, fabrication, and installation of Gate Systems, Fencing, Ornamental Metal Work and Security Products. Quality – Service – David Roher, CEO of Antech Corporation, has announced the appointment of Cary Tantlinger, to the management team at Antech Corporation.

Mr. Tantlinger has been appointed to Vice President of Sales and a member of the Board of Directors. He was previously in construction sales and management. Tantlinger will focus on all aspects of sales and marketing for all companies within Antech including Barcelona Concepts, Guardian Traffic Systems, Guardian Gate Hardware, Nations Gate and Antech Corporation. He will manage sales teams and customer service and assist in product development and day to day operations.

Value represented the cornerstones of Antech when founded in 1949, and those traditions continue today in all endeavors. Come and see what Antech can do to add that special feature to your property.

Antech Corporation, a diversified specialty construction firm is a licensed General Contractor for residential and commercial work in Arizona, and has been helping property owners in Arizona make statements about their properties since 1949. Visit our galley of projects for examples of what we can do for you and your property. If you want a professional job, done with the highest quality materials, that will make a lasting impression about your property, then ANTECH Corporation can meet your needs. Learn more about how we can help make that lasting first impression of your property with improved access control.

Barcelona Concepts manufactures artistic and unique, steel landscape lighting and sconces, metal art, including complete custom services. Artistic, impressive, innovative and functional metal art designed for the discriminating client, to give your home, garden, yard or patio a "signature" appearance; different than your neighbors; something you can’t buy at the home center. Learn more about how Barcelona Concepts can help decorate the outside, or inside, of your home or business with your own special, unique look. www.barcelonaconcepts.com

Guardian Gate Hardware makes the only Lifetime Warranty Heavy-duty Gate Hinge on the market, along with related gate hardware. Guardian Gate Hardware is specified by architects and engineers worldwide. Don't trust your gate system to a cheap imitation or unreliable hinge. We manufacture over 30 styles, sizes and combinations to fit almost any situation. Whether it’s botl-on, weld-on, flange mount, galvanized, powder coated, aluminum or stainless steel, or any of the other options we offer, we have what you need. Learn more about why professional gate installers all over the world rely on Guardian Gate Hardware to get the job done right.

Guardian Traffic Systems manufactures an extensive and impressive line of Access and Traffic Control products sold around the world for commercial, government, education and military applications helping to solve your traffic or access control problems. We have been helping businesses, just like yours, for years, and have the products to get the job done right the first time. We manufacture one of the most extensive lines of traffic control devices, all built with industry leading quality and superb engineering. Learn more about why businesses trust Guardian Traffic Systems to solve their Access and Traffic Control problems.

Nations Gates is the leading gate resource in North America for one-of-a-kind custom gate systems. Whether it is for your home, community or business our designers and engineers will work with you to create the design and specifications to meet your specific needs and budget. Full custom capabilities with nationwide service and support means cost effective solutions for gates and gate entry systems. If you want to install it yourself we'll provide step-by-step instructions with friendly phone technical and installation support for any questions you may have. Make your property entrance grand, for less than you might think and give yourself that peace-of-mind that comes with knowing you just installed an impressive and high quality Nations Gates system. Learn more about how you can have a professional gate system built for your property.

Posted by Industrial-Manufacturing at 03:21 AM | Comments (0)

Barcelona Concepts Launches Exciting Line of Architectural Metal Elements

Barcelona Concepts launched the most comprehensive and exciting line of metal architectural elements available for the residential and commercial applications this week.

Tucson, Arizona, USA (PRWEB) December 27, 2005 -- Barcelona Concepts launched the most comprehensive and exciting line of metal architectural elements available for the residential and commercial applications this week.

Barcelona Concepts is designed and manufactured in the United States in Tucson, Arizona using master artisans that truly understand the versatility and beauty of metal. The line consists of column lighting, Luminettes, sconces, candelabras, trellises, water features, gift items, steel art and limited edition sculptures.

No other company has integrated a complete collection of metal like Barcelona Concepts. Quality can be controlled and monitored more closely due to domestic manufacturing.

Barcelona Concepts works with designers, landscape architects and architects to develop custom images that fit any project. The images seen in the catalog and on the web site can be made into most any product line.

Barcelona Concepts provides a custom, limited edition and artistic approach to metal design at an affordable price. We have created an easy to use on line ordering system and our sales staff is available to assist people with their selection via phone.

Barcelona Concepts is a business unit of Antech Corporation, a company that has been in business in Tucson for over 54 years as a leader in the gate and metal fabricating industry. We have found that people are going out of their way to purchase products made in the USA and Barcelona Concepts is positioned to provide metal elements domestically.

Barcelona Concepts was the brainchild of President and CEO, David Roher. His inspiration began on a trip to Barcelona, Spain and continued with years of planning and design development.“We have been working for months to bring this concept to the residential and commercial markets and believe that this will revolutionize how designers and homeowners incorporate metal into their total design.” says Roher.

Barcelona Concepts can be ordered directly from the factory at 1.520.881.1815 or on line at www.BarcelonaConcepts.com
The new and updated web site will be launched in December 2005.
Wholesale pricing is available.

Posted by Industrial-Manufacturing at 03:19 AM | Comments (0)

December 26, 2005

Architect Anthony Eckelberry Releases New Home Remodeling

Anthony Eckelberry has completed a new home remodeling that transforms the appearance of a contemporary home.

Los Angeles (PRWEB) December 26, 2005 -– Anthony Eckelberry announces that he has just completed a remodeling project that transforms the appearance of a home to a stylish, contemporary structure.

The owner of the property in the Hollywood Hills wanted a new look for his home and alterations to the interior to accommodate musical evenings and a substantial collection of contemporary art.

Architect Anthony Eckelberry came up with the idea of sheathing the exterior walls with horizontal copper siding and using the same material for a curved ceiling in the entry. The owner contributed to the creation by designing a custom stained-glass front door that incorporated copper and the house’s colors.

The homeowner remarked: "Friends that come by admire the house and the neighbors are happy that the house has a new, upgraded façade.”

Musical evenings are now held in the new performance space and the revised interior walls are an ideal backdrop for the attractive display of contemporary art.

Some of Anthony’s residential design work can be seen on the website, http://www.eckelberry.biz

About Anthony Eckelberry, architect:
Anthony Eckelberry is a Los Angeles architect that specializes in new and remodeled high-end homes, and his customers include many people in the entertainment industry.

Contact:
Anthony Eckelberry, principal
323-661-0895
http://www.eckelberry.biz

Posted by Industrial-Manufacturing at 04:14 AM | Comments (0)

Catastrophic Events of This Years Hurricanes Have Impacted Intertape's Business in Unforseen Ways

The rising energy costs and difficulty in obtaining raw materials have forced Intertape to take steps that were not anticipated a year ago. Shortages of product and product changes have seriously impacted business.

(PRWEB) December 26, 2005 -- Jim Derrick, National Sales Manager, commercial products at Intertape Polymer Group (IPG), on 11/22/05 stated that "We have all looked looked in distress at the changing landscape of American Business in the last 12 months. The catastrophic events of this year's hurricanes have impacted Intertape's business in dramatic and unforseen ways. The rise in energy costs along with the difficulty in obtaining raw materials at a favorable price is forcing us to take steps that we did not anticipate one year ago."

He further stated that "because of our need to rationalize the Commercial Business unit of Intertape, we are forced to make some difficult decisions. We have decided to reduce the number of Rep Groups that we are associated with."

Intertape has additionally decided to step away from their presence in the Plumbing Business. The recent loss of Brian Martin Vice President of Sales and long time employee was another serious blow.

Intertape manufacturers a line of tapes, shrink wrap, and related packaging products. The company, which sells directly to end users, as well as through distributors, produces a variety of polyolefin plastic and paper packaging products and packaging systems, including pressure-sensitive and water-activated tape, carton sealing machines, stretch and shrink film, and industrial electrical tape. The company's customers include distributors, retail stores, and large companies in the aeronautical, automotive, food, paper, and other industries. The US accounts for about 80% of the company's sales. In 2004 intertape did in excess of $690 million. They employ aproximately 2600.

Posted by Industrial-Manufacturing at 04:13 AM | Comments (0)

Firenze Enterprises Inc. on the news; Miami-based Venetian Plaster Importer Gets Recognition by Prominent Newspaper

The Miami Herald newspaper covered the success of Firenze enterprises with its Venetian Plasters finishes distribution to the entire US.

(PRWEB) December 26, 2005 --A full, two-page article was published by the most prominent newspaper in Miami, Florida, on December 17th. The reporters visited actual construction sites and collected photos of the stunning Italian wall finishes provided for the Sunday edition of the newspaper. This article is already boosting interest on this specialized product.

Find the link to this article at the http://www.FirenzeEnterprises.com site.

Posted by Industrial-Manufacturing at 04:12 AM | Comments (0)

The School Board of Broward County Awards Projects to Moss & Associate

Bob L. Moss, President of Moss & Associates (Moss), is pleased to announce that the School Board of Broward County has awarded two projects to Moss – Apollo Middle School and Boulevard Heights Elementary. Both of the schools are located in Hollywood, Florida.

Ft. Lauderdale, Florida (PRWEB) December 26, 2005 -- Bob L. Moss, President of Moss & Associates (Moss), is pleased to announce that the School Board of Broward County has awarded two projects to Moss – Apollo Middle School and Boulevard Heights Elementary. Both of the schools are located in Hollywood, Florida.

Moss will construct a new 14-classroom addition and swimming pool for Apollo Middle. The work at Boulevard Heights Elementary consists of a complete renovation to the cafeteria/kitchen as well as improvements to the IAQ program and Fire sprinkler systems.

“We are excited about the opportunity to continue to serve Broward’s Schools through these improvement projects,” Mike Little, Executive Vice President, remarked.

beforeafter
Recently the School Board of Broward County asked Moss to make emergency repairs in the aftermath of Hurricane Wilma. The storm caused severe damage to the West-facing side of the School Board’s K.C. Wright Administration Center building in downtown Fort Lauderdale. The wind pressure and flying debris compromised the glass façade causing the majority of its windows to break.

“We were proud to be able to respond so quickly to the request of the School Board,” Bob Moss stated. “Moss made repairs to watertight the building within 16 days after Hurricane Wilma.”

In March 2003, after 35 years of successfully managing construction organizations throughout the United States and the Caribbean, Bob L. Moss formed Moss & Associates (Moss) along with a core team of top executives, bringing with them vast experience and a diverse project history. The management team of Moss has built some of the most recognized projects constructed in Florida during the last 20 years. They are consistently recognized for outstanding performance in project scheduling, quality and client relationships. Moss & Associates is based in Fort Lauderdale with satellite offices in Miami, Ocala, and Orlando. Additional Moss information is available at http://www.mosscm.com.

Posted by Industrial-Manufacturing at 04:11 AM | Comments (0)

David T. Biggs Presents Lectures on Structural Engineering

Troy engineer was speaker at national conferences.

(PRWEB) December 24, 2005 -- Ryan-Biggs Associates, P.C., a consulting firm specializing in structural engineering, announced today that David Biggs, Principal, recently presented lectures focused on structural engineering topics.

Biggs was the featured speaker for the Masonry Institute of Iowa where he presented “Masonry Aspects of the World Trade Center” as well as a brief presentation on the Pentagon damage from the 9/11 attack. Mr. Biggs also made a presentation titled “Thinking Inside the Box with Concrete for Masonry” at the 2005 Build Boston Conference in Boston, MA. The program was designed primarily for architects and illustrated common and often overlooked uses of concrete masonry units (CMU). This event was sponsored by the New England Concrete Masonry Association. Lastly, Biggs was the guest speaker for the Eastern New York Chapter of the American Concrete Institute. Biggs gave a presentation titled, “f’m 2000 – What Does it Mean?” This seminar presented examples of masonry design to reduce construction costs through more efficient design. He is scheduled to give this seminar again in February in Syracuse.

Mr. Biggs has over 30 years of experience as a structural engineer in private practice. He holds civil engineering degrees from Rensselaer Polytechnic Institute and has taught as an adjunct professor at the university. He has served as national director of the American Society of Civil Engineers, serving on the national committee to develop standards for masonry construction in the United States, and is an Honorary Member. He was also a member of the Building Performance Assessment Team that investigated the collapse of the World Trade Center. Mr. Biggs has authored numerous papers focusing on masonry design and restoration and is a frequent lecturer at universities, professional seminars, and conferences in the United States and overseas.

About Ryan-Biggs Associates, P.C.
Ryan-Biggs Associates, P.C., is a consulting engineering firm specializing in structural engineering. Since 1973, they have been providing design services from their main office in Troy, New York, and branch offices in Skaneateles, New York, and West Chester, Pennsylvania.

Posted by Industrial-Manufacturing at 04:10 AM | Comments (0)

December 23, 2005

National Association of Women in Construction Launches Promotions for Women in Construction Week

Women in Construction Week focuses on helping to build careers, build lives and build the future for women in construction. NAWIC exists to enhance the success of women in the construction industry and every year dedicates a week in March to do just that.

Fort Worth, TX (PRWEB) (PRWEB) December 23, 2005 -- The National Association of Women in Construction (NAWIC), www.nawic.org, is pleased to announce the launch of its promotions for the ninth annual Women in Construction (WIC) Week March 5-11, 2006. This week focuses on helping to build careers, build lives and build the future for women in construction. NAWIC exists to enhance the success of women in the construction industry and every year dedicates a week in March to do just that.

NAWIC promotes WIC Week nationally to raise awareness of the possibilities the construction industry holds for potential employees. “With the labor shortage the construction industry will soon be facing, we want everyone to see how important the industry is to our futures,” says Kara Roberson, NAWIC’s communications director.

This year’s theme is “NAWIC Builds: Building careers, building lives, building the future.” The theme highlights NAWIC’s brand (“NAWIC Builds ... Education ... Careers ... and Futures”) and the desire to build the lives of all women in the construction industry.

NAWIC has close to 200 chapters across the United States. Last year more than 140 of those chapters participated in WIC Week. NAWIC’s Marketing Director, Cassandra Lopez, says, “I was very pleased with the level of participation in 2005 and hope to see one hundred percent participation from all of our chapters in 2006.” Anyone interested in participating in events with local chapters is welcome to contact the National Office at 1(800)552-3506 for more information.

WIC Week was created to increase the visibility of women who work in the construction industry through programs like Construction Career Days and Block-Kids. Chapters will be celebrating the week with a variety of activities from award banquets and membership drives, to community service activities and hands-on workshops, all designed to promote construction and the value of women’s contributions to the industry. “Through recognizing women’s contributions to the industry during this week we are able to give back to the community,” says Lopez.

About The National Association of Women in Construction

Founded in Fort Worth, Texas, in 1955, NAWIC is an international association serving approximately 5,800 members in nearly 200 chapters in the United States. Questions or bio requests can be directed to Marketing Director Cassandra Lopez at (817) 877-5551. NAWIC’s core purpose is “to enhance the success of women in the construction industry.”

Media Contact:
Cassandra Lopez, Marketing Director
The National Association of Women in Construction
327 S. Adams St.
Fort Worth, TX 76104
817-877-5551
www.nawic.org

Posted by Industrial-Manufacturing at 02:06 AM | Comments (0)

Domestic Attorneys Search For Ways to Accept Credit Cards, Some Divorce Clients Unable to Pay Retainers

Skyrocketing divorce rates in the US have domestic attorneys looking for ways to help their clients pay legal fees. Divorce clients are often in severe financial trouble.

(PRWEB) December 23, 2005 -- Domestic attorneys in the United States are currently experience problems with clients that are unable to pay retainers (legal fees). This is especially affecting domestic and defense attorneys.

In the unfortunate case of many divorce lawsuits for example, the client may have frozen bank accounts and other severe financial limitations.

As a result, several attorneys are looking for ways to accommodate their clients by offering financing options -- which can be as simple as accepting credit cards.

“Giving my clients the option of paying with credit has reduced my receivables and has really augmented my business,” says John, an attorney from Richmond, VA.

John recently started using a credit card processor made specifically for attorneys or small law firms.

He continues, “I am a sole practitioner so I don't have a steady flow of credit card business. Nevertheless, the low monthly fee allows me to offer credit payments for my clients.”

This makes it easier for clients to pay legal fees, and it allows attorneys to assist larger numbers of people going through a divorce.

The service that John uses is called “Accept by Phone”, based out of Columbus, OH. It's unique because it requires no equipment, and therefore the traditional expenses of accepting credit cards are eliminated.

See John's solution at http://www.accept-by-phone.com/attorneys.html

Posted by Industrial-Manufacturing at 02:05 AM | Comments (0)

December 22, 2005

NeoTek Homes Continues Its Redevelopment Efforts in Milwaukee, Wisconsin

Previously operating under Duke Construction Group, NeoTek Homes was featured on Fox News to help get the word out to potential home owners. The city is offering lots for $1 and giving a $10,000 forgivable loan to help you build the home of your dreams. No gimmicks.

(PRWEB) December 22, 2005 -- Lindsay Heights is a vision of old neighborhoods restored to their original beauty, according to the initiative based on a collaboration between the City of Milwaukee, private industry, local residents and state and municipal organizations.

Lindsay Heights is named for an African-American woman named Bernice Copeland-Lindsay, who lived in Milwaukee during the first half of the 20th century. A long-time community activist, she fought for equality in jobs, social practices and housing throughout her adult life.

The goal of the initiative is to restore the value of the inner city neighborhood through a sustainable housing development that includes building new homes on infill lots and restoring existing older homes.
The benefits of a new Lindsay Heights home as described on the project Web site, intended for prospective home buyers, include the high quality of the homes, a 10-15% lower cost than site-built units, better construction quality control, shorter construction time, low maintenance costs, less chance of expensive repairs and energy efficiency. The homes are specifically designed for the older neighborhoods.

The two-story and bungalow homes include features typical of classic Milwaukee residential styles. Base prices for standard homes run from $117,000 to $183,500. To support new home ownership, the Neighborhood Improvement Development Corp. (NIDC) collaborated with the Wisconsin Housing and Economic Development Authority (WHEDA) to provide buildable lots. One lot in the project features a home built by Duke Construction Group (now NeoTek Homes) and manufactured by Homes by iBS, Middlebury, IN. By chance, iBS CEO John Guequierre has a personal tie to the project.

“The lot where Duke Construction is using our house lies between Lloyd Street and North Ave on 15th Street. My father grew up three blocks away and my great, great grandfather, the first of our clan in this country and a builder, lived two blocks south of it. I remember walking past all these houses, so I know that neighborhood,” Guequierre says. The original floor plan Duke wanted to use wasn't designed for a narrow lot, so iBS redesigned it. This is one example of the kind of flexibility Guequierre believes is necessary to fully exploit his company's resources. Meanwhile iBS has launched a new focus on infill lots. “It's a good plan for that neighborhood and we've listened to feedback and picked up a few changes,” Guequierre says.

“This is the mindset you have to have. We attune our sales and engineering staff to the fact that this what needs to be done to be successful in infill. We're accumulating a gallery of ideas from both our Indiana and Pennsylvania operations which can be transferred from city to city. There are differences between the two regions but in redevelopment and infill there are lots of commonalities,” Guequierre adds.

Adam Pletcher, chief executive officer for NeoTek Homes, found Milwaukee unlike any other municipality in its approach to the Lindsay Heights neighborhood initiative. Pletcher says, “They are unique in promoting modular design. They are 110 % behind modulars. One advantage is that in the lower income neighborhoods you sometimes get pilferage or vandalism but with modulars you're done in one day and it's weather-tight.”
The lot size limitations called for some careful maneuvering
when the time for setup came, as Pletcher notes.

“Our crane operator is worth his weight in gold,” Pletcher says. “It was an extremely cold day, the windchill factor took it to about zero degrees. He was navigating the sections over the home next to the lot. His crane was between a lightpost and a tree and he had about one inch clearance. That‘s the tightest lot I've ever been involved with,” says Pletcher, “and after that we can do this anywhere.” Pletcher has worked with other builders in the area but he is impressed with Homes by iBS. “They are by far the best we've worked with,” he says. “The quality is there and they stand behind it.”

To see the Fox News report or Automated Builder Article log on to http://www.neotekcorp.com. To find out how you can build your home for tens of thousands less than buying a home feel free to call Adam directly at 847.553.1496.

Posted by Industrial-Manufacturing at 02:54 AM | Comments (0)

Grosvenor Sells bwtech @ UMBC Buildings

Grosvenor is pleased to announce its sale of two buildings totaling 123,000 square feet in Baltimore County, MD to Merritt Properties. The buildings are part of the bwtech @ UMBC Research Park adjacent to University of Maryland, Baltimore County. The sale is part of Grosvenor's new U.S. strategy.

Baltimore, Maryland, December 20, 2005 -- International property development and investment firm Grosvenor has sold two fully leased Class A office buildings totaling 123,000 SF in Baltimore County, MD to Baltimore-based Merritt Properties, LLC. The buildings are located within bwtech @ UMBC, a 41-acre research and technology park adjacent to the University of Maryland, Baltimore County (UMBC) campus.

Grosvenor was represented by Philip C. Iglehart, Andrew J. Smith and James S. Wellschlager of the Colliers Pinkard brokerage firm.

Merritt acquired the 63,000 square foot three-story building at 5521 Research Park Drive, delivered in 2001 and fully occupied by RWD Technologies, and the 60,000 SF 5523 Research Park Drive building delivered in mid-2004. 5523 Research Park Drive is leased to multiple tenants including BDMetrics, Inc., Edwards and Kelcey, Invoke Systems, Convergent Technologies, Physicians Practice, Goddard Earth Sciences and Technology Center, and other organizations including several UMBC program offices.

The sale includes transfer of a long-term ground lease for the two building lots, totaling approximately eight acres. However, the sale terminated Grosvenor’s prior development agreement and plan for the remainder of the 41-acre site.

“Our successful sale of bwtech @ UMBC is part of Grosvenor’s overall U.S. strategy to concentrate our holdings in four major markets -- Washington, D.C., Chicago, Los Angeles and San Francisco -- while focusing on urban office and boutique retail product,” said Andrew Galbraith, Senior Vice President, Grosvenor. “In divesting this suburban office park, we found a perfect match with Merritt Properties, which is locally based and has developed more than 13 million square feet of office, flex, and industrial property in the Baltimore-Washington corridor.”

bwtech @ UMBC allows tenants to benefit from access to UMBC’s expertise, students, technology, programs, and facilities. Businesses moving to the Research Park, which is part of Maryland’s Southwest Enterprise Zone, may receive tax incentives in exchange for creating new jobs and making capital investments.

UMBC began planning for a new research and technology park in the early 1990s, based on the success of similar endeavors in other parts of the U.S. In 1998, UMBC forged ahead with its approved plan for a research and technology park that would house more mature companies, potentially including “graduates” of the techcenter @ UMBC incubator program. UMBC searched for a development partner and ultimately selected Grosvenor, based in part on the firm’s experience in developing other research parks including one at The University of Edinburgh in Scotland.

Grosvenor is a privately owned real estate development and investment company that has been active in North America for more than 50 years. The Company’s North American portfolio consists of more than six million square feet of space, including office, retail, industrial properties, and residential units. Internationally, Grosvenor has interests in properties with a total value of $20 billion, with operating companies in the Americas, UK and Ireland, Continental Europe and the Australia/Asia Pacific region. For more information about the Company, please visit the Grosvenor Web site at: www.grosvenor.com.

Posted by Industrial-Manufacturing at 02:53 AM | Comments (0)

Haroon Inam Joins Cattron Group as Vice President of Global Engineering

Cattron Group International, a leading manufacturer of remote control products and professional services for the industrial, mining, commercial mobile and railroad markets, has announced the appointment of Haroon Inam as Vice President of Global Engineering reporting to the CEO.

Sharpsville, PA (PRWEB) December 22, 2005 -- Cattron Group International, a leading manufacturer of remote control products and professional services for the industrial, mining, commercial mobile and railroad markets, has announced the appointment of Haroon Inam as Vice President of Global Engineering reporting to the CEO.

Cattron Group International (Cattron Group) represents the group of subsidiary companies and product brands owned by Cattron Group Inc.

Inam will officially join Cattron Group the first of January, 2006, from his current position in management of Design Automation at Hamilton Sundstrand, a unit of United Technologies, in Rockford, IL. Inam comes to Cattron with over 19 years of engineering experience including aerospace and industrial experience leading large, diverse technical teams and creating world-class product development groups.

“We’re very fortunate to have someone of Haroon’s caliber leading Cattron’s global engineering initiatives,” stated John Paul, President and CEO of Cattron Group International. “His experience with sophisticated aerospace and systems design automation, in addition to his strong business sense, will enable us to maintain and enhance our corporate mission to bring world-class products to market.” Paul added that Inam’s skill with substantially reducing time-to-market and development of a global engineering footprint will significantly augment the company’s product development cycles necessary to maintain their market leadership.

Prior to Hamilton Sundstrand, Inam was Director of Engineering at Honeywell Power Systems and Vice President of Engineering at Best Power. He earned both his Bachelor’s (with honors) and Master’s degrees in Electrical Engineering from Duke University. He holds three patents in addition to a fourth patent that is pending. Inam has also completed executive training at University of Virginia’s Darden Business School and Harvard Business School.

With 60 years of radio frequency (RF) and industrial remote control experience, Cattron Group companies have a total installed base of over 125,000 remote control systems throughout the world. Its products are suitable for all industries including railroads, construction, shipyards, mining, aerospace, steel, military, agriculture, shipping, material handling, utility vehicles and many more.

Cattron Group International subsidiary companies have operations in the USA, Canada, UK, South Africa, Brazil and Europe, and are supported by an extensive sales and distribution network throughout North and South America, Europe, Asia, Africa and Australia. World Headquarters are located at 58 West Shenango St., Sharpsville, PA, 16150, USA. More information on the company is available by calling +1 (724) 962-3571 or on the internet at www.cattron.com.

Posted by Industrial-Manufacturing at 02:52 AM | Comments (0)

Holiday Builders Teams Up With CK Communications

Holiday Builders has recently hired CK Communications to provide advertising, design and marketing support for the homebuilder. CKC will create the company’s 2006 branding campaign, which will center on having homeowners “Come Home to a Holiday.”

Melbourne, FL (PRWEB) December 22, 2005 -- Holiday Builders has enlisted strategic marketing firm, CK Communications, Inc. (CKC) to provide advertising, design and marketing support for the homebuilder. CKC will create the company’s 2006 branding campaign, which will center on having homeowners “Come Home to a Holiday.”

“Holiday Builders has always been known for our quality and value,” says Jennifer Youngblood, spokesperson for Holiday Builders. “The new campaign will allow us to reach our customers on another level.”

The “Come Home to a Holiday” campaign will launch in December via outdoor, print and direct mail efforts. The campaign will promote homes in Florida, Texas, Ohio, Kentucky, and Alabama.

“The idea behind ‘Come Home to a Holiday’ is to create a consumer experience that emphasizes the emotion involved with building a home,” says Craig Kempf, CEO and creative director, CK Communications, Inc. “We hope to continue building on Holiday’s foundation of price and value, while giving prospective homebuyers an added-value component to add depth to the Holiday brand.”

Providing quality-built homes since 1983, Holiday Builders caters to the value-conscious buyer. They proudly display over 35 Showcase Homes throughout Florida, Texas, Ohio, Kentucky and Alabama. In addition, Holiday Builders has diversified to offer a full-circle home-buying experience to their customers through the creation of HBI Title Company, Holiday Builders Real Estate, LLC, HB Designs, LLC and a partnership with Shelter Mortgage. For more information on Holiday Builders please visit www.holidaybuilders.com or call 800-951-8898.

CK Communications, Inc. is an award-winning strategic marketing firm offering public relations services, print and broadcast advertising, Web design, brand identity, graphic design, multimedia and animation, and special event planning. The firm supports clients additionally by providing advertising space, airtime, production, and printing with no agency mark-up. CKC can be reached by calling 800-594-3CKC (3252) or learn more online at www.CKC411.com.

Posted by Industrial-Manufacturing at 02:51 AM | Comments (0)

Largest Solar Energy Glass Canopy in United States to be Constructed at California Academy of Sciences

Barnabus Energy Inc. awarded contract to develop and install solar energy system that offsets the electric company’s power.

(PRWEB) December 21, 2005 -- The renowned California Academy of Science, the fourth largest Natural History Museum in the United States and home to the Steinhart Aquarium and Morrison Planetarium will soon also be the home to the largest photovoltaic (PV), solar energy glass canopy in the country. Barnabus Energy, Inc. (OTCBB: BBSE), a California-based company that specializes in renewable energy projects, has just been contracted by The Academy to develop and install the system as part of an extensive rebuilding project in Golden Gate Park. The new system will generate in excess of 213,000 kilowatts of electricity and will directly offset power that would have been supplied by the local electric company.

Designed by Pritzker Prize winning architect Renzo Piano of Genoa, Italy, the Natural History Museum’s new building will include a Barnabus Energy-designed PV canopy that will fully circumnavigate the building. Each of the 720 custom-built PV glass laminates is designed to have the highest conversion efficiency available at 20%. Once completed, the new Academy promises to be a symbol of environmental architecture and sustainable design.

Barnabus Energy’s President, David Saltman, said, “This is a great solar energy investment for The Academy. The photovoltaic (PV) system and other environmental features of the project will prevent the release of over 400,000 pounds of Co2, the equivalent of planting 340 trees.” The Company is providing a full scope of services on the project including PV module and system design, material manufacture and procurement, as well as system commissioning and documentation. The project will also utilize SolarSave roofing membranes supplied by sister company, Solar Roofing Systems.

With oil and gas prices hovering at near-record prices, recent energy stock investment articles in Fortune (12/26/05), USA Today (12/19/05), and CNN/Money (11/05/05) continue the discussion about the growing trend to invest in alternative energy to help lessen the world’s reliance on oil and gas.

Barnabus Energy, Inc. (BBSE) is currently acquiring projects within the renewable energy sector encompassing diverse aspects of the industry. The Company has closely aligned itself with key strategic partners that will move themselves forward towards future acquisitions and growth.

Posted by Industrial-Manufacturing at 02:50 AM | Comments (0)

December 21, 2005

Roof-A-Cide Announces the Availability of Our New Mold Remediation Product, Rid-A-Mold™

Roof-A-Cide, the manufacturer of environmentally safe roof cleaning solutions and algae preventatives has recently received EPA Acceptance and Registration of our new mold remediation product, Rid-A-Mold™.

Palm City, Fl, (PRWEB) December 21, 2005 -- Roof-A-Cide, the manufacturer of environmentally safe roof cleaning solutions and algae preventatives has recently received EPA Acceptance and Registration of our new mold remediation product, Rid-A-Mold™.

Rid-A-Mold™ has been independently tested and verified to kill 99.999% of most forms of bacteria and mold within 30 seconds of surface contact.

Building and Construction Professionals can now pre-treat construction materials to minimize the chances of costly mold problems in new construction and remodeling.

For Remedial Treatment of Mold on Construction Materials:
Application should be made by trained applicators only. Remedial treatment of mold on construction materials consists of, but is not limited to, plywood, roof sheeting, OSB board, trusses, wood studs, furring strips, support members, exterior siding, baseboards, CBS block and concrete tie beams.

Authorized Roof-A-Cide™ Applicators properly equipped with our spray equipment can generally use the same equipment for application of Rid-A-Mold™, but we are in the process of designing fogging equipment, which might be more effective in penetrating cracks, crevices, and small spaces.

This presents an excellent opportunity for interested companies to expand their offerings into areas previously unavailable – such as flood clean up & restoration, preconstruction treatment, and preventative services in conjunction with remodeling.

Posted by Industrial-Manufacturing at 01:33 AM | Comments (0)

Rebound Theory Rebounding--Isostatic Rebound Theory an Error in Geological Interpretation

For more than one hundred years geologists have been deluded by the Isostatic Rebound Theory. The reverse is true. The land is not rising but rather the sea is retreating from shorelines worldwide. Falling sea level gave rise to the erroneous theory of Isostatic Rebound. Sea level datum is a myth there is no such thing.

(PRWEB) December 21, 2005 -- In his new book "THE MYSTERIOUS RECEDING SEAS" Richard Guy puts forward conclusive proof that our planet earth is expanding. He concludes that the expansion process makes seas recede from shorelines worldwide. Guy states that sea level datum is the misleading factor in the isostatic rebound theory.

Scientists have misread what is really occurring on earth because sea level has always been accepted as a constant datum. The truth is that sea levels have been ebbing lower and lower and retreating from shorelines, over millions of years, as our earth expands. Guy shows in his book why early civilizations evolved in high mountains: that was the only land they had available in pre-history. He cites biblical references from Noah and the Ark to the Exodus showing how sea levels played a major part in the development of civilizations. All ancient civilizations evolved in high locations around the world. This fact, and the real reason, has never been addressed by historians. Guy states that this is because sea level, through the ages, has always been accepted as a constant. On the contrary it is the variable in the equation of earth expansion and gave rise to the erroneous theory of isostatic rebound.

Guy puts forward copious examples of the seas recession around the world. The proof of the receding seas lies in historical research. Time alone holds the element of proof of receding seas.

Guy is a structural engineer and has built docks, airports, highways and ports on lands that were left behind by the receding seas. His experience as an engineer is worldwide. His books are available on his web page at: www.widemargin2000.com.

Posted by Industrial-Manufacturing at 01:32 AM | Comments (0)

December 20, 2005

Downturn Forces Anglian Windows To Move Out of Horsford Manor Headquarters

Downturn hits windows firm, Anglian Windows and forces them to move out of their Horsford Manor headquarters as part of a restructuring plan.

(PRWEB) December 20, 2005 -- Anglian Windows has been struggling in the face of a slump in consumer demand and a slowdown in the housing market and has announced that it will be moving out of its Horsford Manor headquarters as part of a restructuring plan designed to make the business more competitive.

And it has embarked on a series of measures to drive down costs, improve efficiency and increase sales, which the company says are starting to bear fruit.

Figures published today show that Anglian's parent company, Naiglan Holdings, reported an operating loss of £485,000 for the year to the end of April 2, 2005, compared with a profit of £19.4m a year earlier. When interest charges were added in, Naiglan reported a pre-tax loss of £12.5m compared with a profit of £3m the year before.

Turnover also fell, down to £277m from £311m in the previous period, as fragile consumer confidence hit sales of conservatories and windows.

As part of the restructuring plan Anglian has decided to close down its loss-making kitchens business. The division, called Living Design, was based in Scotland and sold kitchens through a network of agents.

David Rimmer, Anglian's deputy executive chairman, said it had been losing money for a number of years. "It was acquired in 1994 and to be honest it had been struggling for some time," he said. "We have been scaling it back for the past three or four years and we decided to close it."

Anglian has also shut its manufacturing plant in Port Talbot in South Wales, which manufactured windows for the commercial market. Production was moved to the company's Rochdale site.

Mr Rimmer, who is running Anglian while chief executive Larry Condon recovers from an operation, said shutting the factory was designed to match production capacity with demand.

"The closure of Port Talbot means we have the right production capability going forward," he said. "We do not see sales recovering this year as the market is still very tough, but we have the flexibility to step up if that occurs."

In Norwich, Anglian is moving its senior management team out of Horsford Manor to the company's main factory site in Anson Road.

Horsford Manor itself is being put up for sale, but the company's social club and sports facilities will be unaffected and are not part of the sale.

Mr Rimmer said the move would save money but, more importantly, bring the senior managers closer to staff and make it easier to share ideas.

"Anglian has more than 20 buildings in Norwich alone which isn't very efficient," he said. "Our reorganisation is about bringing people together so they can work more closely and more productively."

Posted by Industrial-Manufacturing at 02:11 AM | Comments (0)

Talking Rock Introduces New Ranch Cottage Floor Plans

With only 30 new Prescott homes available, buyers encouraged to act now.

PRESCOTT, AZ (PRWEB via PR Web Direct) December 20, 2005 –- Talking Rock (http://www.talkingrockranch.com), a luxurious master-planned housing community in Prescott, Arizona, has earned a reputation among buyers for offering the best in high-country living and quality crafted homes in Northern Arizona. The community will live up to that reputation once again when it unveils four new floor plans of the popular Ranch Cottage homes (http://www.talkingrockranch.com/ranchCottages.aspx). In January new Prescott home buyers will be introduced to the new plans that integrate the best features of the previous plans with innovative additions, including one entirely new Prescott home model.

Developed by leading Southwest new home builder, Geoffrey H. Edmunds and Associates, the new Ranch Cottages maintain the spirit and character of Talking Rock, while offering buyers higher bedroom counts, a larger variety of exterior color pallet and roof material options, and more space inside and out.

“Once again Geoffrey H. Edmunds’ unique architectural style and quality new home construction has provided us with a product that not only harmoniously blends with the Talking Rock environment and lifestyle, it sets a new standard in comfortable country living,” said Jim Buckley, sales director for Talking Rock.

The latest Prescott, Arizona home model at Talking Rock will offer buyers approximately 2,500 square feet including three bedrooms, three and one-half baths and a three-car split garage, with a guest bunkhouse option, complete with a separate entrance. This spacious floor plan also includes a front courtyard that creates a relaxed outdoor living space perfect for entertaining.

Adding to the appeal of these new floor plans is their location on Talking Rock’s golf course. Buyers of this beautiful Prescott golf real estate (http://www.talkingrockranch.com/golf.aspx) will enjoy grand views of the rolling greens and distance mountain ranges from the home’s rear verandas. With only 30 of the newly designed Prescott area homes for sale, buyers are encouraged to call the Talking Rock Sales Office at 866-433-4220 for more information or to be placed on the interest list (http://www.talkingrockranch.com/RequestInfo.aspx). Sales for the new floor plans are expected to begin in early February.

Offering the best of both worlds, Talking Rock is located in a peaceful, rural setting and yet is just minutes from Prescott where homeowners have access to shopping, dining, entertainment and numerous outdoor recreational opportunities (http://www.talkingrockranch.com/location.aspx). It is a 3,400-acre private, Northern Arizona luxury home community with a casual western lifestyle and the amenities of an exclusive country club. Its Jay Morrish-designed 7,350-yard championship golf course intertwines through more than 1,000 acres of preserved open space, presenting residents with the spaciousness of Arizona’s high country.

In addition to The Ranch Cottages, Talking Rock offers spacious custom Prescott lots for sale, as well as new Ranch Homes and Custom Homes designed in an authentic ranch style and constructed by the finest Prescott custom home builders (http://www.talkingrockranch.com/architectsBuilders.aspx).

Talking Rock is a development of Harvard Investments, a Scottsdale, Arizona based real estate development company respected for its high quality, residential projects throughout the Southwest. Beyond the Talking Rock new homes community in Prescott, Harvard designed and developed communities are found in Austin, San Antonio, and Dallas, Texas; and in Phoenix, Sedona, and Tucson, Arizona.

Harvard’s Canadian parent, the Hill Companies, is a privately held diversified company involved in real estate development, oil and gas production and distribution, broadcasting, surety bonding, and life insurance. The Hill Companies celebrated its 100th year of continuous family ownership and operation in February, 2003.

More information on Talking Rock and Harvard Investments, Inc. can be found at www.talkingrockranch.com.

Media Contact: Constance Sablan
Olson Communications, Inc
(480) 471-6761

Posted by Industrial-Manufacturing at 02:10 AM | Comments (0)

Home Maintenance Franchiser - Maintenance Made Simple - Fixes the Fix-it Business

Entrepreneur Magazine’s #1 home maintenance franchiser, Maintenance Made Simple, delivers on-time, high-quality home repairs through advanced systems and strong relationships.

Scottsdale, Arizona (PRWEB) December 20, 2005 -- Home maintenance franchiser Maintenance Made Simple announced a one-stop home repair service for everything from masonry and landscaping to plumbing and electrical, employing tradespeople who call ahead, arrive on time and—best of all—do the job right the first time, at a reasonable price.

Since its debut in 2003, Maintenance Made Simple has been rewiring the home repair industry through a franchise concept that emphasizes quality, consistency, dependability and value. Assembling a formidable network of entrepreneurs, tradesmen, business systems and operational expertise, the company has grown to 30 franchises nationwide and will triple in size within the next 12 months.

In December 2004, Maintenance Made Simple was named the #1 Handyman and Home Maintenance Service in Entrepreneur magazine’s 2005 list of America’s 100 Hottest New Franchises, signifying its pioneering status in the home repair field.

“Maintenance Made Simple has done more than simply bring discipline to the fragmented home repair industry. In everything we do, we start with the homeowner’s mindset. What does he or she want or need?” says Michael McNinch, president of Maintenance Made Simple. “Satisfying the customer is the priority that drove our scheduling system, our stringent personnel standards, our service plans and our performance guarantee. Maintenance Made Simple brings peace-of-mind like no other home repair resource.”

Reinvestment, Resale

Home improvement continues on an unprecedented scale in the U.S., with more than $125 billion spent annually according to Harvard University’s Joint Center for Housing Studies. Increasing numbers of homeowners, realtors, and neighborhood associations are seeing the value of continued upkeep as a way to increase property values and overall home enjoyment.

Maintenance Made Simple has capitalized on these trends as well as the need for time- and skills-challenged homeowners to find quality tradespeople at a fair price. The company can address virtually any repair, replacement, or installation issue around the home including heating and cooling, windows and doors, gutters, siding, carpentry, decks and fences, painting and much more.

All Maintenance Made Simple tradesmen are licensed and insured and have extensive experience in their field. The company does not impose trip charges or mark up materials, and all work is backed with a 1-year limited guarantee.

Sophisticated Support

Maintenance Made Simple franchisees, many of whom are mid-life businesspeople looking to own their own business, enjoy a level of support unparalleled in the home improvement industry. Programs include extensive headquarters training and on-site consultation; to ensure a solid start to their operation, Maintenance Made Simple also provides a comprehensive sales lead program and full menu of marketing services.

Among the most valued benefit for customers and franchise owners alike is Maintenance Made Simple’s customer service. The company maintains a national call center, equipped with advanced and proprietary customer relationship management software, to schedule all customer referrals and appointments. Contractors employed by the local franchisee know their schedules days in advance and are in touch with appointment specialists from the field throughout their workday. Even more, contractors are required to call the homeowner 30 minutes before every scheduled appointment, eliminating no-shows and those dreaded multi-hour spreads for arrival times.

Maintenance Made Simple even makes it simple for homeowners to schedule their maintenance work via the Internet. To learn more about the company, its services and franchise opportunities, call 866-778-6283 or visit www.m2simple.com.

About Maintenance Made Simple:
Founded in 2003, Maintenance Made Simple is the nation’s premier full service home repair and improvement company specializing in residential and commercial services. As a “one stop shop” for the full range of home improvement needs, Maintenance Made Simple makes finding, bidding, and scheduling quality repairs easy for consumers. Backed by a professional, national call center and sophisticated marketing programs, Maintenance Made Simple was named “Hottest New Franchise” by Entrepreneur magazine for 2005. Veritas Investment Partners, an investment firm owned by John Culbertson and Michael McNinch, bought MMS in July, 2005. For more information, log on to www.m2simple.com.

Posted by Industrial-Manufacturing at 02:09 AM | Comments (0)

Martinson-Nicholls Heated Entrance and Work Mats Provide Safer Footing and Warmth Indoors and Out

The Heated Entrance and Work Mats produce a portable, radiant heat, and are ideal for vestibules, work stations, and high traffic entrances where cold feet or tracking in slush and snow is a problem. The mats are very economical to use, may be used indoors or outdoors, and will melt snow and ice.

(PRWEB) December 20, 2005 -- The Heated Entrance and Work Mat provides safer footing during snowy winter months by melting snow and slush for pennies a day. Additionally, they provide radiant heat in entrances and vestibules, helping reduce heating costs while providing warmth and helping to dry the floor. They also work very well as work mats for working in the garage during winter months and other areas where people must stand on cold floors.

The Heated Entrance and Work Mats produce a portable, radiant heat, and are ideal for vestibules, work stations, and high traffic entrances where cold feet or tracking in slush and snow is a problem. The mats are very economical to use, may be used indoors or outdoors, and will melt snow and ice.

Using the same technology as our outdoor snow melting mats, The Heated Entrance Mats are easy to install—just unroll and plug them in. With a 140 BTU per square foot output, and based on research in a 60 degree area, the mats reach a temperature of 100 degrees indoors for only pennies a day. When used outdoors, the mat's heated section keeps it free of snow and ice.

This mat can be installed in door ways and ramps creating a safer walking environment around the clock. The drying action of the heated mat also eliminates damage to floors and door jams by helping to dry tracked-in water. In high traffic areas where snow from outside is likely to be carried in by boots, the Heated Entrance Mat provides surer footing by quickly melting slush and snow that can accumulate on unheated mats.

The low profile surface of this mat provides ease of use for wheel chairs or walkers. The non-slip surface provides optimum traction year round, is durable, and may be cleaned with mild detergent and water.

The Heated Entrance Mat has unlimited applications, including your garage, vestibule areas, work station, assembly lines, guard shack and shipping and receiving areas. The radiant floor heat can be more effective and economical than space heaters. It's easy to operate—simply plug it in using the 10 foot cord that incorporates an inline GFI. Using standard 120VAC, 15A circuit, all electrical components are UL listed. Offered in black, high grade Nitrile rubber, The Heated Mat is an ideal size for residential use and work area (36" x 39" overall, with a 28" x 32.5" heated section). Other sizes offered include 3' x 5', 3' x 10' (ideal for ramping), 4' x 6', and 4' x 12'.

About Martinson-Nicholls

Martinson-Nicholls, over the last 25 years, has established itself as a leader in custom floor matting and safety solutions.

Martinson-Nicholls provides the customer with the exact size needed-small, large, standard, nonstandard, special shapes and logos. Custom installations are also a specialty of the company.

Anti-slip safety tapes and treads are available in various sizes and textures from hand cut or die cut pieces to full rolls and special shapes.

"We have concentrated on floor safety, anti-fatigue and indoor and outdoor heated floor mat applications. We welcome the special applications that our customers present us with. This has enabled us to satisfy come very unique and unusual problems for our customers," says Dan Ruminski, President of Martinson-Nicholls.

Posted by Industrial-Manufacturing at 02:08 AM | Comments (0)

December 19, 2005

Energy Savings and Return On Investment for UV Equipment Installations

The report reviews the history and current literature on ultraviolet germicidal irradiation (UVGI) cooling coil disinfection and summarizes the available information on laboratory and field testing of UV installations. Information on the energy savings and payback period of cooling coil irradiation are provided along with examples of the computation of typical payback periods.

Hilton Head Island, SC (PRWEB) December 19, 2005 -- Dr. Kowalski, PE, Ph.D., Penn State University, developed a strong report which shows that UV can be cost justified as a capital expenditure by the savings it provides. The UV installations provide savings in energy and maintenance costs as well as enormous benefits of a healthier indoor environment.

The report reviews the history and current literature on ultraviolet germicidal irradiation (UVGI) cooling coil disinfection and summarizes the available information on laboratory and field testing of UV installations. Information on the energy savings and payback period of cooling coil irradiation are provided along with examples of the computation of typical payback periods.

The report shows that irradiating cooling coils with UV will virtually prolong the life of the HVAC system. The study includes results from existing laboratory and field tests on UV equipment as well as analysis of UV effectiveness for cooling coils disinfection. It provides formulas for calculating return on investment (ROI) and the savings in energy and dollars from improving the efficiency and extending the life of coils. It can reasonably be expected that typical UV installations will produce payback periods of 2-4 years. That is, the cleaning action of UV on fouled coils is so effective and the reduced maintenance costs and the savings in energy are so significant that the retrofit of a UV cooling coil system typically pays for itself in about 2-4 years. The report shows an example where the payback period is achieved in only 8 months. The energy savings results from two effects – the reduced pressure loss through the coils and the increased heat transfer in the coils when the fouling film is removed. Both of these can be significant, as can the reduction or elimination of maintenance for the cooling coils. Since the coils will be maintained in a clean condition, there is virtually no requirement for periodic cleaning.

The economic savings that can result from the installation of a UV cooling coil disinfection system can be estimated by comparing the operating costs after installation with the operating costs before installation, minus the cost of installing and operating the UV system. Ideally, operating data would be drawn from field test results. This necessitates installing of a UV system. Little published data is available for installed systems but there are testimonials suggesting that UV disinfection systems are fully capable of restoring a fouled cooling coil to approximately the original design operating conditions. The cost savings will then depend on how much coil fouling has occurred and how far the system capacity has been diminished in comparison with the original design conditions.

The elimination of microbiological fouling of the cooling coils can be demonstrated through surface sampling before and after installation of the UV system. An alternative indicator of the effectiveness of UV germicidal irradiation could be coil performance, since the elimination of surface contamination should theoretically restore cooling coil performance to original design values.

For the complete UV Report and detailed information on UV air and surface disinfection please visit the American Air & Water, Inc. website at www.americanairandwater.com

Posted by Industrial-Manufacturing at 02:12 AM | Comments (0)

Watkins Hire Portable Boiler Plant Helps Construction Continue At New Hospital

When leading PFI provider Skanska wanted help to maintain heating and domestic hotwater supply for the Oncology Department during the construction of Walsgrave hospital in Coventry, Skanska contacted Watkins Hire for a complete hire solution that included 720kW Heatgen mobile packaged boiler plant. Skanska has an extensive PFI portfolio, the project is to design, construct and provide facilities management services to a new 1212-bed acute hospital and clinical teaching facility at Walsgrave.

(PRWEB) December 18, 2005 -- During the demolition phase of the old Walsgrave hospital, the existing supply pipework for heating and domestic hotwater systems were to be terminated, to allow preparation for the new buildings. A hire boiler was required to supply heating and domestic hotwater to the Oncology Ward. Skanska called Watkins Hire to carry out a site survey and engineer a solution.

Watkins Hire interpreted the site requirements, equipment required for the project included a 720kW Heatgen mobile packaged boiler plant fuelled by natural gas, 210kw domestic hotwater heat exchanger, system pumps to match the flow, volume and resistance of the existing pipe distribution network. The Heatgen was selected from one of Watkins Hire extensive fleet of 350 mobile boiler plants.

The Heatgen was delivered with Watkins Hire own transport and lifted onto site with a 100 tonne crane. With the 720kW Heatgen mobile packaged boiler plant in place the next phase of the project to install. The installation proceeded well culminating in the final break-in to the clients heating system with the 720kw LPHW Heatgen going directly on line to maintain heating and domestic hotwater to this crucial ward of the Hospital.

With a time scale of 4 hrs there was no going back and the final terminations were made, the Watkins Hire commissioning engineer carried out pre- commissioning checks, final connections were made and Watkins placed the hire boiler system online. Now online the Watkins Hire engineer balanced the 720kW Heatgen mobile packaged boiler plant to the clients heating system.

The supply of a temporary heating system has been achieved with meticulous planning in the pre-commissioning of the Heatgen in Watkins Hire new depot located at Walsall.

Mark Walton of Watkins Hire said" we followed our routine procedure prior to delivery, to test fire the Heatgen and individual components, with the hire system checked and tested before delivery, the commissioning engineer was able to put the system on line with the 4 hour timescale required by the client."

The project has now been taken over by Watkins Hire service department ensuring that unit is effectively maintained and serviced to ensure problem free 24/7 running over the remaining 12 month hire period.

Mark Hills Managing Director said "with over 350 boilers within our boiler rental fleet, we can respond to any request for boiler plant. Every need is individual so our expertise and experience prove vital to the provision of immediate solutions to your requirements - from planned shutdowns to emergency situations and long term solutions, with our comprehensive range."

Posted by Industrial-Manufacturing at 02:10 AM | Comments (0)

December 17, 2005

Huiquan Fiberglass mesh

Ningbo Huiquan Fiberglass Mesh Co., Ltd is a professional manufacturer and exporter of coated alkaline-resistant fiberglass mesh with fixed capital of 2 million US dollars and annual throughput of 45 million square meters per year. There is a staff of over 500. The company mainly produces fiberglass wall reinforced mesh, EIFS reinforced mesh, GRC(Glassfiber reinforcement cement) reinforced mesh, mesh used for marble and mosaic and self-adhesive fiberglass tape(mesh).

(PRWEB) December 17, 2005 -- We won praise of customers with our advanced equipment and perfect quality control and won market with our competitive prices. Our products are exported to more than 30 countries and areas. In Europe and America, we set strategic cooperative partner relationship with many clients. Welcome cooperation.

1. Coated Alkaline-resistant fiberglass Mesh: With machine weaving fiberglass as basic material. Specially treated by latex on surface. With performances of high intensity, alkali and erosion resistance. As a new-type reinforced construction material, it is widely used in fields of wall reinforcement, cement and plaster reinforcement, EIFS reinforcement, mesh used for marble and mosaic.

2. Self-adhesive fiberglass Tape (mesh): Self-adhesive fiberglass tape (mesh) is treated by surface glutinous glue with functions of repairing crack and reinforcing wall body connection as well as features of easy construction.

Mesh: 2.85×2.85MM(9×9mesh/inch)
Weight: 50g/M2 or 60g/M2
Width: 35MM, 45MM, 48MM, 50MM, 100MM, 150MM or according to customers' requirements
Length: 20M, 45M, 90M, 153M or according to customers' requirements
http://www.nbhuiquan.com

Posted by Industrial-Manufacturing at 01:24 AM | Comments (0)

The Bering Strait Project: Symposium 2006

A forthcoming publication on the Bering Strait Project offers opportunities for companies, advertisers, and sponsors.

(PRWEB) December 17, 2005 -- "The Bering Strait Project: Sympsoum 2006" provides a tantalising set of perspectives on an endeavour that represents one of greatest challenges of the post-Cold War era: uniting the continents across the Bering Strait.

Overview:
This is where the 53-mile wide strait, named for Danish explorer Vitus Bering (c.1681-1741), separates four continents across the Europe-Asia landmass and the Americas.

The archives reveal some surprises: the link was first proposed in the mid-19th century; and in 1902-07, a rail-tunnel project was seriously considered by US and French investors.

In the early 21st century, there is a significant opportunity to re-evaluate the potential for East-West links across the Bering Strait: via rail tunnel; the Northeast and Northwest sea passages; and the ongoing development of the air corridor above the Bering Strait.

In a world thirsty for energy resources and trade, the potential for US-Russian/International cooperation across the northern Pacific Rim remains vast.

Format Hardback (Casebound) and Digital File

Extent: Approx 180 Pages with illustrations, maps, photographs, and Index.

Isbn: 0-9551834-8-0 (Hbk/slipcase)/
Isbn: 978-0-9551834-8-5 (13 Digit)

Publishers: Information Architects

Note: IA is the lead agency for collating and publishing information and investigating the pre-feasibility of the crossing. Please note: a bridge or highway crosssing is NOT under consideration. Projects include: rail-tunnel mega-project; shipping and ferry links; air corridor development; energy projects; resource development; regional schemes (rail-feeder lines) and cross-border relations and customs, etc.

Dade: June 2006

Category: Science/Geography - Technology/Transport - International Relations

Editor: James A. Oliver

Authors: George Koumal, Joe Henri, Dr Yutaka Mochida, et al (distinguished authors from US, Russia, Canada, Japan, and the UK).

Call for Papers: if you wish to submit a paper, provide a brief synopsis with details of your expertise, etc to: e-mail protected from spam bots

[The Editor's decision is final.]

Advertisers & Spnosors: US$800 Per Page (black and white; artwork 156x236 mm). Company Profiles: US,1500 (pages negotiable).

Agency Commissions: 20%

All Enquiries: James A. Oliver, Editor, via e-mail protected from spam bots

Who should Read the book? The report will be of special value to: government and inter-governmental agencies, multi-lateral agencies, energy corporations, international law firms, multinational construction companies, global banks and financiers, diplomats, consultants, strategic planners, regional leaders, policy makers, global freight carriers, transport analysts, heavy equipment manufacturers, international tunnel & rail companies, academics, universities, and major libraries.

The Editors
Information Architects
Date: 8 December 2005

Posted by Industrial-Manufacturing at 01:23 AM | Comments (0)

Independent Testing Confirms Superiority of Rapid Edge® Serrated Blade

The Rapid Edge® serrated utility blade emerged as the best performing utility blade in an independent product test. Rapid Edge® Utility Blade (product # 004) was tested against six other brand utility blades, including Stanley®, Ace®, Lenox®, and Irwin® products and scored at the top of every category.

BURLINGTON, ONTARIO (PRWEB) December 16, 2005 -- The Rapid Edge® serrated utility blade emerged as the best performing utility blade in an independent product test. Rapid Edge® Utility Blade (product # 004) was tested against six other brand utility blades, including Stanley®, Ace®, Lenox®, and Irwin® products and scored at the top of every category.

Bureau Veritas, an autonomous product testing company, recently released the results from the November evaluations. All blades were tested on four materials - drywall, nylon rope, nylon carpet and asphalt shingles - by the same product test engineer to insure an exact, equal and consistent manner for all manufacturers. Observations recorded at 50, 100 and 150 cuts on each material clearly recognize the Rapid Edge® blade superiority in resistance to dulling, blade wear and notch wear. In three of the four categories, Rapid Edge is highlighted as the best performing product, while in the drywall test it has a shared rating as top performer. On the nylon carpet test, engineer comments indicate Rapid Edge® is the only blade without any visible wear after 150 cuts.

- A sampling of responses from Rapid Edge® users;

From W.B., Temple, TX: “I’m a maintenance supervisor and I use utility and Bonnie knives all the time. I probably own 8-10 different knives. This one has a better comfort when handling. The Blade Lock and Light are excellent safety features. They seem to cut smoother and faster than standard blades, and the blades really do last longer than others. An excellent hand tool for any pouch or tool box.”

From P.K., Warwick, RI: “The Rapid Edge® is an unbelievable knife. I got the blades at a perfect time. I was just remodeling my bathroom and I had to cut the concrete board. I used the Rapid Edge and compared it to my Stanley® blades. The Rapid Edge® blades lasted longer and required less cuts. The light on the bottom is also another great feature. At $6.99, this item is priced perfectly. I would love to sell the Rapid Edge® in my store.”

The Rapid Edge® serrated utility blade is the first patented product in the Rapid Tools line. The Rapid Edge® serrated utility knife blade is designed with a unique serration pattern that incorporates three to five cutting surfaces compared with the single cutting surface of conventional knife blades. This configuration allows the blade to stay sharp longer and cut more evenly. The blades are designed to fit most standard utility knives and are available in blister packs as well as with the Rapid Edge® Knife, an innov