Industrial News

« September 2007 | Main | November 2007 »

October 31, 2007

Navtrak: Little-Known IRS Tax Break Makes Investing In GPS Tracking Technology More Affordable Than Ever

Special tax deduction offers fleet owners a unique opportunity to invest in GPS tracking software in 2007.

Salisbury, MD (PRWEB) October 31, 2007 -- Many business owners looking to purchase a GPS tracking system to improve the performance of their mobile workforce delay their decision, assuming that the costs of implementing it are too prohibitive, despite overwhelming and well-documented benefits from third-party industry research firms such as the Aberdeen Group.

However, some excellent opportunities exist to help business owners overcome this hurdle. For example, one of most beneficial, yet least known methods is the IRS Section 179 tax deduction, which allows companies to expense the cost of tangible property in the same year it is purchased, rather than spread it out over multiple years.

Specifically, IRS Section 179 allows a sole proprietor, partnership or corporation to fully expense tangible property in the year it is purchased. And tax-law changes over the past few years have made this option much more appealing by dramatically increasing the amount that can be written off immediately (up to $112,000).

To read more about the IRS Section 179 deduction, simply download a free article courtesy of GPS tracking provider Navtrak by clicking here.

This special tax incentive, designed specifically for growing organizations, represents a fiscally sound method of capitalizing on new technologies such as GPS tracking that might otherwise seem to be unattainable.

The Section 179 provision gives business owners and fleet managers the freedom to look closely again at the advantages of GPS tracking for their operation, and re-evaluate the potential impact on both productivity and profits through:

1. Real-time knowledge of entire fleet's activity at a glance
2. Detailed history of vehicle stops, speeds, routes, idling times, etc.
3. Reduced operational costs, i.e. overtime and fuel expenses
4. Improved response to customer due to accurate information from the field
5. Safety and security of vehicle-based employees
6. Liability protection
7. Lower insurance risks/potential insurance discounts

The Section 179 deduction is not automatic, so to take advantage of it you must first elect to do so. Talk to your accountant to explore your options, or download our free article on the IRS Section 179 deduction to learn more.

For more information about Navtrak, please view a free online demo of our GPS vehicle tracking system, or simply request more information by calling 800-787-2337.

Posted by Industrial-Manufacturing at 06:25 AM | Comments (0)

Group 70’s Ralph E. Portmore Named President of Hawai‘i Chapter of the American Planning Association

Group 70 International, Inc. is pleased to announce that Ralph E. Portmore, AICP, of counsel to the firm and a leading member of its master planning, environmental assessment (EA) and environmental impact statement (EIS) team, has been named president of the Hawai‘i Chapter of the American Planning Association.

Honolulu, HI (Vocus/PRWEB ) October 31, 2007 -- Group 70 International, Inc. is pleased to announce that Ralph E. Portmore, AICP, of counsel to the firm and a leading member of its master planning, environmental assessment (EA) and environmental impact statement (EIS) team, has been named president of the Hawai‘i Chapter of the American Planning Association.

Some of Portmore’s Hawai‘i projects include:
• Outrigger’s Waikiki Beach Walk – Master plan, EIS and development permits
• Kapolei City – Urban design plan and design guidelines
• Wailuku Redevelopment – Area plan and design guidelines
• Kuilima Resort – Master plan and development permits
• Victoria Ward Centers – Mixed use development master plan
• Hawaiian Electric Company – Ward Avenue property mixed-use development master plan
• City and County of Honolulu – ‘Ewa, Central O‘ahu and Ko‘olau Loa development plans
• La‘ie Community – Master plan, EIS and development permits

Portmore earned a master of science degree in urban planning from Columbia University in New York in 1968 and a bachelor of science degree in civil engineering from Rutgers University in New Jersey in 1963.

About the Hawai‘i Chapter of the American Planning Association
The Hawai‘i Chapter, founded in 1962, has approximately 270 members from various islands of the State of Hawai‘i and other U.S. states. Membership includes private and public sector planners, decision-makers, administrators, lawyers, architects, interest groups, landowners, developers, university professors, students and other interested individuals. The purpose of the Hawai‘i Chapter is to serve, lead, inspire and educate its members, the residents of the state and Pacific neighbors. This purpose is accomplished by encouraging public participation in planning, promoting excellence in planning and increasing the public’s understanding of, and appreciation for, planning and its contribution toward improving the quality of life.

About Group 70 International, Inc.
Founded in 1971 in Honolulu, Group 70 International, Inc. is an award-winning firm specializing in architecture, planning and environmental services, interior design and assets management. Group 70 International is known for innovative designs and cultural and environmental sensitivity in community consensus building. For more information, visit www.group70int.com.

Media Contact:
Keith DeMello
(808) 539-3482

Posted by Industrial-Manufacturing at 06:24 AM | Comments (0)

The Dow Chemical Company Supports Habitat For Humanity’s Jimmy Carter Work Project in Los Angeles

Using innovative building materials from Dow, thirty families move into energy-efficient homes for the holiday.

Midland, Mich. (PRWEB) October 31, 2007 -- The Dow Chemical Company (Dow) is lending support to Habitat for Humanity’s 24th annual Jimmy Carter Work Project (JCWP), Oct. 28 – Nov. 2, 2007, in Los Angeles. During the weeklong project, thousands of volunteers from around the world will join former U.S. President Jimmy Carter and his wife, Rosalynn, in building 30 new homes and rehabilitating 70 homes this week and through the end of the year.

As a result of Dow’s unique donation, which includes financial and employee volunteer support as well as product contributions like STYROFOAM™ and WEATHERMATE™ housewraps, new homeowners will benefit from significantly reduced energy consumption and increased savings. Using Dow product contributions, a new multi-family unit will reduce natural gas consumption for heating by 23 percent, and provide 30 percent overall reductions in electricity consumption.

Through Dow’s long-standing 27-year relationship with Habitat for Humanity, the Company’s leadership in science and technology will be leveraged at the 2007 JCWP to solve some of the world’s more pressing challenges, including decent housing, sustainable development and energy efficiency.

“Dow is helping to make a difference in the lives of families in need by supporting Habitat for Humanity and the Jimmy Carter Work Project,” said Scott Young, global portfolio director of energy efficiency for Dow. “Together, we are building strong communities where people have a sustainable and affordable place to call home. With the substantial savings from reduced energy use, these new L.A. homeowners will enjoy a more comfortable living space and enjoy lower utility bills - month after month, year after year - long after the last nail is hammered.”

The Habitat for Humanity homes will be built in partnership with 30 low-income families in South Los Angeles and in the San Pedro area near the port. Families partnering with Habitat for Humanity complete 500 hours of ‘sweat equity’ in building both their home and the homes of the other partner families. Families also pay a no-profit mortgage for their homes, which is then used to build even more simple, decent and affordable housing in the Los Angeles area. In addition, 70 homes in these two neighborhoods, already owned by low-income families, will be repaired through Habitat for Humanity’s “A Brush With Kindness” program.

To help additional low-income families in one of the most expensive and overcrowded metropolitan areas in the U.S., Habitat for Humanity of Greater Los Angeles made a three-year commitment to build and rehabilitate 150 additional homes throughout the area. The campaign, “Build a Greater Los Angeles,” is co-chaired by California Governor Arnold Schwarzenegger and Los Angeles Mayor Antonio Villaraigosa.

In addition to supporting the JCWP, Dow has also pledged its commitment to several other programs, including Habitat for Humanity’s Global Village & Discovery Center and Congress Building America initiative.

The Carters are Habitat’s most famous volunteers. Each year since 1984, the Carters have given one week of their time to build homes and raise awareness about the need for simple, decent and affordable housing. Previous JCWP events have been held in New York City, Georgia, Michigan, the Philippines, India, Hungary, South Korea and South Africa. Habitat’s project with the Carters in 2008 will be held along the U.S. Gulf Coast.

About Dow
Dow is a diversified chemical company that harnesses the power of innovation, science and technology to constantly improve what is essential to human progress. The Company offers a broad range of products and services to customers in more than 175 countries, helping them to provide everything from fresh water, food and pharmaceuticals to paints, packaging and personal care products. Built on a commitment to its principles of sustainability, Dow has annual sales of $49 billion and employs 43,000 people worldwide. References to “Dow” or the “Company” mean The Dow Chemical Company and its consolidated subsidiaries unless otherwise expressly noted. More information about Dow can be found at www.dow.com.

About Habitat for Humanity of Greater Los Angeles
Habitat for Humanity of Greater Los Angeles strives to eliminate poverty housing through advocacy, education and partnership with families in need to build simple, decent affordable housing. Since 1990, Habitat for Humanity of Greater Los Angeles has built more than 200 homes, transforming the lives of hundreds of individuals. In the spring of 2007, Habitat for Humanity of Greater Los Angeles kicked off its three-year “Building a Greater Los Angeles” campaign to build or rehabilitate 250 homes in Los Angeles County. For more information, visit www.habitatla.org and www.jcwpla.org.

About Habitat for Humanity International
Habitat for Humanity International is an ecumenical Christian ministry that welcomes to its work all people dedicated to the cause of eliminating poverty housing. Since its founding in 1976, Habitat has built more than 225,000 houses worldwide, providing simple, decent and affordable shelter for more than 1 million people. For more information, visit www.habitat.org.

For editorial information:
Nancy Fullerton
The Dow Chemical Company
+1.989.636.8190
nfullerton @ dow.com

Duane Bates
Habitat for Humanity
+1 229.924.6935, Ext. 3079
dbates @ habitat.org

Tina Janczura
GolinHarris
+1 312.729.4349
tjanczura @ golinharris.com

Posted by Industrial-Manufacturing at 06:23 AM | Comments (0)

Free Excavation Safety Training at Diggingsafely.com

Millions of people dig, trench, and excavate, often unaware of the hazards posed by underground utility lines or cave-ins. diggingsafely.com provides free online training in order to prevent the resulting injuries and fatalities.

Eagan, MN (PRWEB) October 31, 2007 -- Midwest ENERGY Association (MEA) announces a new free excavation safety training website. The Federal Pipeline and Hazardous Materials Safety Administration (PHMSA) reports that excavation damage is a great concern in pipeline failures. More than 6 million construction workers and millions of homeowners dig, trench, and excavate, often unaware of the hazards posed by underground utility lines or cave-ins.

Patrick Van Beek, MEA President explains, "MEA believes excavation related fatalities and injuries are preventable. That's why MEA members are sponsoring our free excavation safety website diggingsafely.com." The training is free and available to anyone with access to the Internet.

"Road, sewer, water, cable, telephone, fencing, swimming pool, basement, landscape, and irrigation contractors are all excavating. Any one of them, or even a homeowner, could create a safety hazard if they do not call before they dig and if they do not know how to safely work around buried utility lines," continued Van Beek.

diggingsafely.com is a tool for contractors, public officials, and homeowners to learn about:
Excavation safety -- who & when to call before digging, hazards and safe practices when working around buried power and gas lines.
Abnormal operating conditions.
Preventing accidental ignition if a gas line is damaged.
Characteristics and hazards of natural gas.
Working in enclosed and confined spaces.
Hazardous emergency response.

Other features and benefits of the site:
Records course use -- help for Pipeline and Utility DOT Integrity Management Compliance including the proposed Distribution Integrity Management Program (DIMP).
Supports State One Call System efforts and excavation safety programs of pipelines and utilities.

MEA will contact state one-call offices nationwide offering to create links so that anyone wanting training can access the diggingsafely.com site. One-call systems will be able to track use of diggingsafely.com in their state.

"Midwest Energy Association is now a national OQ solutions provider dispensing training and qualification materials to over 800 associate entities," DOT Report to Congress, December 2006.

"Diggingsafely.com expands our commitment to worker safety and damage prevention by offering excavators outside our industry the benefit of our quality training. For over 10 years, we have provided pipelines and utilities with DOT compliance materials. We mined our extensive 200 plus course library to find courses that any excavator or homeowner can use to keep themselves safe and cause less damage to underground utility systems," offered Larry Murray, MEA's OQ Team Leader. "We offer the industry a complete system of Comprehensive Energy Records and Compliance (CERC) tools through energyu.org and our other CERCsolution products.

Midwest ENERGY Association is in its second century of service to the gas, electric, and liquids energy industry. MEA products are designed by and for its member companies. Its problem solving roundtables, learning conferences, online learning and web communications services are relied on by over 750 companies in all 50 states. MEA is headquartered in Eagan, MN.

Posted by Industrial-Manufacturing at 06:23 AM | Comments (0)

EquipNet Acquires Advanced Asset Sales Services, Inc.

Further increases its position in the biotech industry while strengthening its auction capabilities.

Canton, MA (PRWEB) October 31, 2007 -- EquipNet, Inc., the leading provider of proactive asset management solutions, today announced that it has acquired Woburn, Massachusetts-based Advanced Asset Services, Inc.a leader in laboratory asset disposition.

Over the last 10 years, Advanced Asset Services has successfully managed more than 1 billion dollars in pre-owned equipment sales for global organizations such as Bayer, BASF, Raytheon, Lam Research, and Quest Diagnostics.

"We're extremely excited about this acquisition," said Roger Gallo, president and CEO of EquipNet. "It nicely solidifies our ability to provide clients with even more options in our cascading multi-channel disposition approach for our clients idle and surplus assets."

"We're thrilled to be joining forces with EquipNet," said Dennis Higgins, co-principal of Advanced Asset, Services who will now lead EquipNet's efforts in its Biotech vertical. "By joining forces with EquipNet, we've instantly created a dominant force in the biotech industry for asset management."

The acquisition also greatly expands EquipNet's online and live auction capabilities. Both Higgins and Tom Noonan, the founder of Advanced Asset Services are licensed auctioneers and bring over 30 years of industrial auction experience to the new venture.

"It's a great step forward for our two companies and for the entire pre-owned equipment industry," explained Noonan, who joins EquipNet to oversee EquipNet's worldwide auction efforts. "We look forward to significantly increasing our market share of online and traditional industrial auctions."

EquipNet has relocated all of Advanced Asset Services' employees into its world headquarters in nearby Canton, Mass. EquipNet is conducting the next biotech online auction on November 13, 2007 and will be featuring assets from GPC Biotech in Waltham, MA.

About EquipNet, Inc.
EquipNet is a leading provider of proactive asset management solutions and services to leading corporations such as Colgate-Palmolive, Eastman Chemical, GlaxoSmithKline, and Unilever. Its vision is to revolutionize the way companies manage their surplus assets. EquipNet has earned a reputation for helping clients maximize their financial return; avoid the risks associated with health, safety and environmental hazards, and shrinkage, and to be in compliance with Sarbanes-Oxley. For more information, please visit www.EquipNet.com.

Posted by Industrial-Manufacturing at 06:22 AM | Comments (0)

EquipNet to Host Web Seminar

Interactive event to cover best practices for closing a manufacturing plant

Canton, MA (PRWEB) October 31, 2007 -- EquipNet, Inc., the leading provider of proactive asset management solutions, today announced that it will be hosting a web seminar on Thursday, November 1st at 2:00 pm ET. The webinar titled Seven Plant Closing Mistakes and How To Avoid Them will outline the best practices to employ when closing a manufacturing plant.

EquipNet will draw on its in-depth expertise in asset management to educate participants about the 7 most costly mistakes when closing a plant. The mistakes include practically giving away valuable equipment; selling it all for a dollar, or just bulldozing it away.

Attendees will hear what EquipNet's Fortune 500 manufacturing customers in the pharmaceutical, chemical, consumer goods and biotech industries have learned. Avoiding even one of these seven plant-closing mistakes can save a company millions of dollars.

A significant amount of C-level executives, VPs, directors and many other corporate level managers involved in plant closings have already signed up to attend this seminar. Manufacturing and operations managers at the plant level experienced in disposing of surplus equipment will find this seminar valuable because even one of these mistakes can have a significant impact on a company's bottom line.

To register for the web seminar go to http://www.iian.ibeam.com/events/enet/24127/

About EquipNet, Inc.
EquipNet is a leading provider of proactive asset management solutions and services to leading corporations such as Eastman Chemical, GlaxoSmithKline, and Unilever. Its vision is to revolutionize the way companies manage their surplus assets. EquipNet has earned a reputation for helping clients maximize their financial return; avoid the risks associated with health, safety and environmental hazards, and shrinkage, and to be in compliance with Sarbanes-Oxley. For more information, please visit www.EquipNet.com.

Posted by Industrial-Manufacturing at 06:21 AM | Comments (0)

G&A Partners to Host Webinar on Social Security 'No Match' Letters

G&A Partners, a fully integrated Houston-based human resource (HR) and administrative services company, will host its newest webinar, "Myths and Facts of Social Security 'No Match' Letters," on Nov. 1. This webinar will explore the Department of Homeland Security's (DHS) new "No Match" regulations and differentiate myths from facts.

Houston (PRWEB) October 31, 2007 -- G&A Partners, a fully integrated Houston-based human resource (HR) and administrative services company, will host its newest webinar, "Myths and Facts of Social Security 'No Match' Letters," on Nov. 1. This webinar will explore the Department of Homeland Security's (DHS) new "No Match" regulations and differentiate myths from facts.

On Oct. 10, 2007, a federal judge temporarily halted the implementation of the DHS' new "No Match" regulations. Under the regulations, employers who receive "No Match" letters must take affirmative steps to resolve the issues that gave rise to the "No Match" letter or face possible civil and criminal liability. A "No Match" letter is issued when an employee's Social Security number does not match the employee's name in either the DHS' or the Social Security Administration's databases.

This complimentary webinar will be hosted by Jacob Monty, managing partner for Monty Partners, LLP. Registration is currently open for the webinar. To register, visit https://www.gotomeeting.com/register/711842920

"This webinar informs HR professionals about what to do if they receive a "No Match" letter and dispels many of the myths surrounding these letters," said Anthony Grijalva Jr., vice president of marketing for G&A Partners. "The information presented is critical for understanding how these new regulations could impact your business."

About G&A Partners:
G&A Partners is a Houston-based HR and administrative services company that manages human resources, benefits, payroll, accounting and risk management for growing businesses. G&A maintains offices in Houston, Dallas, San Antonio, Austin, College Station and Corpus Christi. For more information about the company, visit www.gnapartners.com.

Posted by Industrial-Manufacturing at 06:21 AM | Comments (0)

All Senior Executives Need to be Aware of FIN 48

Just when you thought it was safe again, from the horrors of FASB pronouncements (remember FAS 123r and the stock option accounting nightmare) along comes FIN 48, "Accounting for Uncertainty in Income Taxes."

Los Angeles, CA (PRWEB) October 31, 2007 -- Charles Dargan, CEO of www.cfo911solutions.com offers, "While many in the accounting profession thought this was a bad idea, since it could give the IRS a roadmap to auditing certain corporate tax positions, nobody thought Congress would also use it. Surprise!"

The Senate's Permanent Subcommittee on Investigations, led by Michigan Democratic Senator Carl Levin, is using the FIN 48 disclosures to investigate companies that disclosed large tax reserves. There are some 30 companies that the Senate investigators have requested information regarding details of tax transactions, as reported in the Wall Street Journal. Where it goes from here will be interesting and probably unnerving.

Before FIN 48, none of this information was required to be disclosed in the financial statements, and most if not all corporations chose not to provide such information, for the obvious reasons. Most tax issues, and especially aggressive tax positions, were adjudicated with the IRS or in court, away from the public arena. Now, this will not be the case.

From the FASB summary, FIN 48 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. The first step is recognition: The enterprise determines whether it is more likely than not that a tax position will be sustained upon examination, including resolution of any related appeals or litigation processes, based on the technical merits of the position. The second step is measurement: A tax position that meets the more-likely-than-not recognition threshold is measured to determine the amount of benefit to recognize in the financial statements. The tax position is measured at the largest amount of benefit that is greater than 50 percent likely of being realized upon ultimate settlement.

About CFO 911 Solutions:
CFO 911 professionals are the leading, hands-on experts in solving operating, accounting and finance problems for both public and private companies. CFO 911 professionals have amassed a unique depth and breadth of operational and finance experience developed by having worked as Presidents, COOs and CFOs inside Fortune 500 firms, micro cap publicly traded companies, private emerging growth companies and not-for-profit organizations.

Our experience includes a variety of industries: software, telecommunications, wireless services, systems integration, aerospace, defense, manufacturing, distribution, entertainment, health care, medical devices, apparel, transportation, food, computer hardware and peripherals, internet portals, E-commerce, motor sports, specialty retail, restaurants, automotive aftermarket, satellite radio and heavy construction.

To help you improve your bottom line, call our office @ (310) 574-9119, or visit our newly updated website at: www.cfo911solutions.com.

Posted by Industrial-Manufacturing at 06:20 AM | Comments (0)

Award Winning Architects Revitalize Key Commercial Site And Showcase Hillside Estate In Exclusive Palette of Homes Tour

This weekend brings several things to celebrate at Montgomery Design Group. Their architectural design will be showcased for a third year in Phoenix Home and Garden's Palette of Homes Tour, the commercial practice recently broke ground on the revitalization of a major retail site in Scottsdale, and the combination of new residential and commercial projects has driven 25% growth in the firm's 2007 revenue projections.

Scottsdale, AZ (PRWEB) October 31, 2007 -- Montgomery Design Group Inc, with three decades of experience, will showcase their third hillside property in Phoenix Home and Garden's Palette of Homes Tour that will take place on November 4, 2007 and benefit Free Arts of Arizona. "The Corey residence underwent a complete transformation that included the addition of a second floor, reconfiguration of 90% of the interior spaces, and wrapped up with two very pleased home owners," states Fabio S. Neto, Vice President, Montgomery Design Group. "Each year we have been honored in the Palette of Homes Tour is very special. Naturally the recognition of the teams that have worked on these fine properties is appreciated - but more important to our firm, is the fact that the proceeds from the home tours directly benefit Free Arts of Arizona. Since our group is driven by art and design every day, we believe in this non profit organization because Free Arts provides a valuable service in sparking the artistic imagination of at-risk children and their families."

From a completely different perspective, the firm's commercial practice continues to build. As ground breaks in Scottsdale on a key retail site, the Montgomery Design Group submits another set of plans into design review that will support Peoria's commercial expansion. "We are very excited about the firm's growth across the board this year and proud that our commercial practice has been a big contributor," remarks Robert M. Brown, President, Montgomery Design Group. "We are active across the valley and a few highlights include: the redesign of the 56,000 sq ft. retail space along with an 8,000 sq ft. entry façade for the Scottsdale and Shea Retail Center, new construction for neighborhood retail over 26,000 sq ft that will feature a boutique grocery store, and one of our larger efforts under construction is The Village Shoppes project which will cover an 3.8 acre site located along the Baseline corridor."

Although these are just a few examples of the projects Montgomery Design Group has underway, they invite you to learn more about the firm and their role as trend setters in residential and commercial architectural design. To view Montgomery Design Groups award winning designs or schedule a meeting, please visit their website at: www.mdgaz.com or contact their offices in Scottsdale, Arizona.

About Montgomery Design Group Inc
Montgomery Design Group, with offices in Scottsdale Arizona, is an award winning architectural firm with three decades of experience. The firm specializing in residential and commercial design, has been recognized by the National Association of Home Builders through the receipt of the 'Best In American Living' custom residence award, showcased in three 'Palette of Homes' tours, and featured in Phoenix Home & Garden. Currently, the Montgomery Design Group has several custom residential and commercial properties in design which include: a 12,000 sq ft. private estate in Paradise Valley, Arizona; The Village Shoppes commercial project in Phoenix; and they have recently completed the restoration of the historic Secret Garden wedding reception center built in 1929.

Media Contact information:

Kelly A. Isley, Partner
Corcoran Associates
Business Advisors & Public Relations
V: 480.814.7471
F: 480.998.9088
Web site: www.corcoranassoc.biz

Posted by Industrial-Manufacturing at 06:19 AM | Comments (0)

Webinar on Fixing North America's Trillion Dollar Construction Industry

Boston's Big Dig broke ground in the mid-1980s, and ten years later broke records as the most expensive highway project in U.S. history, running nearly $10 billion over budget. But it's only the most visible example of an increasingly common trend. Across the nation, construction projects large and small are spiraling out of control with delays and cost overruns. This webinar will examine the issues currently plaguing the construction industry and their rippling effects, and offer practical advice for owners wishing to eliminate inefficiency, lack of accountability, and waste in their projects.

Ft. Lauderdale, FL (PRWEB) October 31, 2007 -- e-Builder, a provider of web-based construction project management and collaboration solutions today announced it will host a webinar on November 14, 2007 based on the recently published book "Broken Buildings, Busted Budgets: How to Fix America's Trillion-Dollar Construction Industry". The event will be presented by the book's author Barry Le Patner, who will discuss the problems behind project delays and costly budget overruns that continually plague North America's construction industry. Mr. LePatner will also offer valuable and practical insights to help construction owners minimize risk, avoid costly surprises, and improve project delivery. To register, please visit https://www.gotomeeting.com/register/694815662

Jonathan Antevy, co-founder and CEO of e-Builder, will join Mr. LePatner and share his insights into what corporate owners can do to take a more proactive role in ensuring on-time, on-budget project execution. Jonathan brings over 12 years of first-hand experience on how owner organizations have leveraged technological advances to improve business processes and project delivery capabilities.

During this provocative webinar, Mr. LePatner will build a powerful case for change in America's $1.23 trillion construction industry, to eliminate the $120 billion wasted each year. As a recent Brookings Institution report highlights, the United States will spend $25 trillion on construction by 2030. A full $3 trillion of that will be wasted if the system continues unchecked.

This informative session will:
1. Highlight the variables contributing to this waste, including the asymmetry of information and ineffective intermediaries;
2. Define the players and their role in correcting the problem;
3. Define what owners can do to regain control and avoid 'surprises'
4. Provide insights to help owners identify and allocate risk
5. Help owners better understand contract provisions and fixed-price implications

About Barry LePatner
Barry B. LePatner, Esq. is the founder of the New York City-based law firm LePatner & Associates LLP. For three decades, he has been prominent as an advisor on business and legal issues affecting the real estate, design, and construction industries.

A nationally recognized speaker, Mr. LePatner has addressed audiences on topics central to trends affecting the real estate industry at recent events including: "Real Estate Outlook," an annual seminar series for corporate and real estate executives; "Protecting the Owner from Pitfalls in Today's Construction Projects," a series of Continuing Legal Education lectures given to law firms and their in-house real estate departments; "Protection, Survival, Readiness: Project Strategy in the Post 9/11 World," a seminar presented to institutional, developer and corporate real estate executives; "Secure Space," a building security seminar for corporate owners and developers; and "Marketing for Design Professionals" at the Harvard Graduate School of Design's Summer Program, with A. Eugene Kohn from1990-2004.

He has written extensively and is widely quoted in the media on the subject of construction law. Mr. LePatner has previously co-authored the legal sections of the Interior Design Handbook, McGraw Hill 2001, and Structural & Foundation Failures: A Casebook for Architects, Engineers & Lawyers, McGraw Hill, 1982 co-authored with Sidney M. Johnson, P.E. For more information, visit http://www.lepatner.com/

About Jonathan Antevy
Jonathan N. Antevy is CEO and co-founder of e-Builder, Inc., a leading provider of web-based collaborative project management solutions that help owners frustrated with project delays and cost overruns.

After working for several Florida based construction companies he was admitted to the graduate construction management program at the M.E. Rinker Sr. School of Building Construction in 1993. In completing his degree, Jon researched and presented his year-long study of multimedia and Internet applications for the construction industry. In 1994 Jon formed e-Builder, Inc. His team led the industry in the design, development and implementation of Program Specific Web Sites, Extranets, and Intranets exclusively for the construction industry. e-Builder provides solutions that enable Web sites created for projects to be used for real-time communication, information exchange, scheduling and cost control.

Since June 1995, Jon has been featured over 30 times in Engineering News-Record. In January 1996, Jon was nominated by McGraw-Hill and ENR as one of the Top 25 Newsmakers of the Year for being the first to move practical construction applications onto the World Wide Web. In 1999, Jon was selected as one of the Top 125 Innovators in the Last 125 years of the Construction Industry, by ENR and McGraw Hill. In 2000, McGraw-Hill made its mark in the industry by exclusively teaming up and investing in e-Builder. For more information, visit www.e-builder.net

Posted by Industrial-Manufacturing at 06:19 AM | Comments (0)

Clear the Title on Your Real Property with a Deed of Reconveyance

LawDepot.com launches the newest in its line of real estate documents: the Deed of Reconveyance.

Desert Hot Springs, CA (PRWEB) October 31, 2007 -- LawDepot.com expands its suite of automated real estate documents with the release of the Deed of Reconveyance form. Using LawDepot's step-by-step process, this new form allows users to create a document in minutes.

A Deed of Reconveyance is a document that transfers the title of a property to the borrower (trustor) from the trustee (lender) to the borrower once the borrower has fully paid the debt secured by a Deed of Trust. A Deed of Reconveyance must be recorded with the County Recorder or Recorder of Deeds in order to clear the Deed of Trust from the property. If the trustee fails to record a satisfaction within the set time limits, the trustee may be responsible for damages as set out by statute.

LawDepot's new form makes drafting a Deed of Reconveyance quick and inexpensive. An intuitive, fill-in-the-blanks process allows anyone to use the Deed of Reconveyance form with ease. It's faster and less expensive than hiring a legal professional to draft the same document.

Having just paid off a significant debt, the last thing the borrower wants is to incur a large legal bill in order to clear the title of his or her property. LawDepot's Deed of Reconveyance form allows the borrower to clear his or her property without spending a large amount of money to create the document necessary to do so.

For additional information on the news that is the subject of this release (or for a sample, copy or demo), contact Dave Pettitt or visit http://www.lawdepot.com/contracts/deed-of-reconveyance-form/

About LawDepot.com: LawDepot.com is the most advanced provider of online legal documents. Hundreds of thousands of satisfied customers have appreciated LawDepot.com's efforts to make complex legal documents easy to generate with a simple step by step process. Thorough legal review processes ensure all documents are current and accurate. LawDepot.com offerings cover all facets of the legal industry, ranging from Real Estate, Business and Human Resources, to Estate, Divorce, and Family Law.

Posted by Industrial-Manufacturing at 06:18 AM | Comments (0)

e-Builder Hosts Architect, Engineering & Construction Technology Conference

Professional conference showcases latest technologies, building green & workshop.

Fort Lauderdale, FL (PRWEB) October 31, 2007 -- e-Builder, a leading provider of web-based construction project management and collaboration software, announces it will host its annual user conference November 7-9, 2007 at the Marriott Harbor Beach Resort in Fort Lauderdale.

The conference, targeted at architect, engineering, and constructions professionals (AEC) will highlight new and innovative ways in which construction stakeholders are deploying technology to manage and control their capital development projects and the new wave of technology that will revolutionize the industry.

Who Should Attend:

IT Professionals in the building, design and construction industry who want to network with their peers and learn more about emerging technology in construction
Architect, engineering & construction professionals looking to learn how to increase competitive advantage, and improve project planning, execution, and delivery from industry leaders
e-Builder users and non-users, including executives, project managers, owners/owner reps, and administrators

Where:
Marriott Harbor Beach Resort & Spa
3030 Holiday Drive, Ft. Lauderdale, FL
www.marriottharborbeach.com

When:
November 7 - 9, 2007

Why:

Two days of intense knowledge sharing, networking and fun including a packed schedule with interactive training classes on e-Builder product modules, Building Information Modeling (BIM), the future of green building, building business process improvement, emerging technologies, and industry best practices
Learn how AEC professionals are leveraging technology advances to increase ROI and improve efficiency in project lifecycle management
Learn from a list of guest speakers who come from the largest construction and design firms in North America
Meet the e-Builder Team - build relationships and communicate your ideas, suggestions, and needs

Information: www.e-builder.net/uc

About e-Builder
Founded in 1994, e-Builder is a leading provider of construction management and collaboration software. The company's flagship product, e-Builder Enterprise, provides owners of large capital development projects with visibility into key performance indicators across their entire portfolio to ensure timely, on-budget project completion. e-Builder combines cutting edge technology and industry knowledge to provide thousands of owners, architects, engineers, contractors and suppliers with solutions that enhance development and construction processes. The company is headquartered in Fort Lauderdale, Florida. For more information, visit www.e-Builder.net.

Posted by Industrial-Manufacturing at 06:18 AM | Comments (0)

New Green Building Regulations in the United Arab Emirates Provide Opportunities for Industrial Nanotech's Nansulate® Coatings.

Industrial Nanotech, Inc. (Pink Sheets:INTK), an emerging global leader in nanotechnology, announced today that new guidelines issued recently by the Dubai government will require all new construction in Dubai to comply with state-mandated standards for energy and environmental efficiency beginning in January 2008. The Company's exclusive distributor in the U.A.E., Al Samah Company, began work earlier this year with commercial developers to certify the company's nanotechnology-based coatings for energy efficient Green Building standards.

Naples. FL (PRWEB) October 31, 2007 -- Industrial Nanotech, Inc. (Pink Sheets:INTK), an emerging global leader in nanotechnology, announced today that new guidelines issued recently by the Dubai government will require all new construction in Dubai to comply with state-mandated standards for energy and environmental efficiency beginning in January 2008. The Company's exclusive distributor in the U.A.E., Al Samah Company, began work earlier this year with commercial developers to certify the company's nanotechnology-based coatings for energy efficient Green Building standards.

The new policy gives Dubai the distinction as the first Middle Eastern city to require all new buildings to be energy efficient and one of the first in the world. An energy efficient building, according to the U.S. Green Building Council, must save 70 percent on electricity, 50 to 60 percent on water and 36 percent of energy compared to standard edifices.

"It is estimated that there is approximately 100 billion dollars of construction either under way or planned in Dubai, UAE. The groundwork that our distributor, Al Samah, has been laying in the U.A.E. will allow our Nansulate coatings to be incorporated into their green construction standards in this region and provide a precedent for other countries around the world," states Francesca Crolley, V.P. of Operations & Marketing for Industrial Nanotech, Inc. "We are now positioned to make a major impact on green building construction as more regulations like these are enacted in cities around the globe."

About Industrial Nanotech, Inc.
Industrial Nanotech Inc. is rapidly emerging as a global nanoscience solutions and research leader. The Company develops and commercializes new and innovative applications for nanotechnology. Industrial Nanotech, Inc. is a member of the U.S. Green Building Council. Additional information about the Company and its products can be found at their websites www.industrial-nanotech.com and www.nansulate.com.

About Nansulate(R)
Nansulate(R) is the Company's patented product line of specialty coatings containing a nanotechnology based material and which are well-documented to provide the combined performance qualities of thermal insulation, corrosion prevention, resistance to mold growth and lead encapsulation in an environmentally safe coating formulation. The Nansulate(R) Product Line includes both industrial and residential coatings.

Safe Harbor Statement
Safe Harbor Statement under the Private Securities Litigation Reform Act of 1995: This release includes forward-looking statements made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 that involve risks and uncertainties including, but not limited to, the impact of competitive products, the ability to meet customer demand, the ability to manage growth, acquisitions of technology, equipment, or human resources, the effect of economic and business conditions, and the ability to attract and retain skilled personnel. The Company is not obligated to revise or update any forward-looking statements in order to reflect events or circumstances that may arise after the date of this release.

SOURCE: Industrial Nanotech, Inc.

CONTACT:

For Industrial Nanotech, Inc., Naples
Martin E. Janis & Company, Inc.
Investor Relations
Beverly Jedynak, President, 312-943-1100 ext. 12
bjedynak(at)janispr.com

or

Martin E. Janis & Company, Inc.
Media Inquiries
Laura Grock, Vice President, 312-943-1100 ext. 13
lgrock(at)janispr.com

Posted by Industrial-Manufacturing at 06:17 AM | Comments (0)

Hendrick Named President of DORMA Automatics

DORMA Group North America has named Gerald B. Hendrick President of DORMA Automatics, Inc.

Reamstown, PA (PRWEB) October 31, 2007 -- DORMA Group North America has named Gerald B. Hendrick President of DORMA Automatics, Inc. He will be responsible for all of the division's products and services. In his new role, Hendrick will also oversee the Crane Revolving Door and Carolina Door Control brands, which with DORMA Automatics comprise the DORMA Entrance Systems marketing unit.

"Gerald's exceptional knowledge of the industry and his proven leadership within DORMA make him an ideal candidate to steward our trusted, well-known brands: DORMA Automatics, Crane and CDC," said Larry O'Toole, president and CEO of DORMA Group North America. "Coordination of these three important components of our business will advance DORMA Group North America's strategy of delivering complete architectural opening solutions--from innovative products to service."

As the previous director of sales and marketing for DORMA Automatics, Hendrick built on a background that encompasses nearly 20 years of experience in the architectural products industry. Before arriving at DORMA, he was division president for an automatic door manufacturer and has extensive familiarity with senior management with branch sales and operations.

About DORMA Group North America
DORMA Group North America manufactures and markets a wide range of products for the architectural openings industry, with a particular focus on commercial and institutional openings. Part of The DORMA Group worldwide, DORMA Group North America comprises DORMA Architectural Hardware, DORMA Glas, Modernfold, DORMA Canada, DORMA Mexico, and DORMA Entrance Systems -- which markets products and services under the DORMA Automatics, Crane Revolving Door and Carolina Door Controls brands.

DORMA Group North America offerings include safety and security products, locks, door closers, exit devices, glass hardware and patch fittings, sliding and swinging automatic doors, revolving doors and operable partitions.

Posted by Industrial-Manufacturing at 06:16 AM | Comments (0)

BidClerk.com Reports Construction Projects Up For Bid in the Houston, TX Area

BidClerk's daily update of Texas construction projects coming up for bid and starting construction within the next 90 days.

(PRWEB) October 30, 2007 -- BidClerk, the Construction Industry Search Engine, reported today that the following commercial construction projects are planning to go out for bid or start construction in the next 90 days in the Houston, TX area. Businesses interested in providing services relative to these projects should visit BidClerk.com and reference the Project ID listed below to obtain direct contact information for each job:

Houston, TX - Town & Country North, 10516 Old Katy Road, 8,649-square-foot retail building, November 2007, $800,000. Project ID: 683416

Houston, TX - Steel Supply - Remodeling & Addition, 10600 Telephone Road, 9,600-square-foot steel supply facility addition & renovation, December 2007, $1 million. Project ID: 688343

Houston, TX - Starbucks Retail Shell Building at Mission Bend, 6830 Highway 6 S., 4,066-square-foot national chain coffee shop retail shell building, December 2007, $400,000. Project ID: 686729

Houston, TX - Michaels / Houston, 224,633-square-foot retail fit-out, November 2007, $2.5 million. Project ID: 687241

Houston, TX - Museum Place -Vertical Construction, 5300 Fannin St., 300,000-square-foot multi-residential development, March 2008, $40 million. Project ID: 682279

BidClerk.com is the only Search Engine dedicated to providing businesses with in depth information on thousands of construction projects coming up for bids all throughout the United States. Our daily updates of commercial and residential construction project leads are available to contractors and businesses in related industries that are seeking bid opportunities. For more information on bidding construction projects in your area, visit BidClerk online or call 877-737-6482.

Posted by Industrial-Manufacturing at 06:16 AM | Comments (0)

Donaldson Torit Extends Proven Ultra-Web Technology to Deliver MERV 15 Rated Cartridge Filter

New higher efficiency cartridge filter delivers longer filter life, cleaner air and greater energy savings.

Minneapolis (PRWEB) October 30, 2007 --Donaldson® Torit® announces its Ultra-Web® nanofiber technology line now includes an even higher efficiency cartridge filter that delivers longer filter life, cleaner air and greater energy savings. Ultra-Web SB, certified by independent lab tests at MERV 15 efficiency, is the latest extension of this dust collection technology that is backed by 80 issued and pending patents worldwide and has performed 25 years in the field.

Ultra-Web SB filters ship in 24 hours and are available as replacement filters for Donaldson Torit cartridge dust collectors as well as all other popular dust collectors. Ultra-Web technology also improves lives, extending beyond dust collection to use in medical research, M1 Abrams tanks and more.

Ultra-Web SB with MERV 15 efficiency is a tougher filter ideally suited for applications that face challenges from agglomerative dust in industries such as chemical, pharmaceutical, cosmetic, textile, grain, woodworking, metalworking and others. This filter media combines the excellent surface-loading and dust release capabilities of high efficiency Ultra-Web technology with a strong spunbond polyester substrate for enhanced durability, moisture and chemical tolerance when compared to typical spunbond or meltblown filter media. The spunbond substrate is also made with a unique resin-free process that allows Ultra-Web SB to perform in challenging conditions where higher temperature, chemicals and moisture could weaken or destroy the resin system within standard substrate media.

Ultra-Web SB cartridge filters also feature wide pleat spacing which allows thorough pulse cleaning of fine and fibrous particulate including ceramics, cotton, fiberglass, grains, shotblast, grinding, polishing and dust from powder coating.

To meet a wide variety of application needs, Donaldson Torit provides a full Ultra-Web line that filters submicron dust particles (0.3 micron and larger) with MERV 13, 14 or 15 efficiency ratings. Donaldson Torit has optimized its MERV 13 rated Ultra-Web technology through the years to provide the longest filter life and lower stabilized pressure drop while requiring less energy. Cartridge filters with higher MERV ratings often have shorter filter life.

Donaldson Torit designs, manufactures and markets in-plant air filtration and pollution control systems, replacement filters and products that help eliminate dangerous dust, fume and mist contaminants from the workplace. Donaldson Torit is part of the Donaldson Company, a leading worldwide manufacturer of filtration systems.

For information on Ultra-Web technology, visit UltraWebisAlwaysBetter.com, call
888-338-3878 or e-mail donaldsontorit@mail.donaldson.com.

About Donaldson Company, Inc.
Donaldson is a leading worldwide provider of air and liquid filtration systems and replacement parts that improve people's lives, enhance our Customers' equipment performance and protect our environment. We are a technology-driven company committed to satisfying our Customers' needs for diesel engine equipment and industrial filtration solutions through innovative research and development, superior technology, and global presence. Our 12,000 employees contribute to the company's success by supporting our Customers at more than 100 sales, manufacturing, and distribution locations around the world. Donaldson is a member of the S&P MidCap 400 and Russell 1000 indices, and our shares trade on the NYSE under the symbol DCI. Additional information is available at www.donaldson.com.

Posted by Industrial-Manufacturing at 06:15 AM | Comments (0)

Ground Breaking for International Airport in Panama City, Florida Convinces Real Estate Developer Glick that this is the Right Place at the Right Time for Fractional Real Estate

Real estate developer Nathan Glick announced to the reservation holders of his 280th project, Infinity Blu, that the ground breaking ceremony for the highly anticipated Panama City -- Bay County Airport has been set.

Panama City, FL (PRWEB) October 30, 2007 -- A short time ago, Dr. Stephen Cochrane (Chief Regional Economist for Moody's Economy, www.infinitybluu.com ) predicted Panama City, Florida as the #1 market for growth. In his prediction, he noted a projected 72% increase in real estate value over a 5 year period. Prominent real estate developer Nathan Glick is preparing for that prediction to come true. Today Nathan Glick announced to the reservation holders of his current project, Infinity Blu, www.infinityblu.com, the ground-breaking ceremony for the highly anticipated Panama City - Bay County International Airport. The date has been set for Thursday, November 1st, an event so welcome to the area that the News Herald is reporting Florida Governor Charlie Crist will be in attendance. This New International Airport will serve as a gateway to locations around the world.

The land for the airport, approximately 4,000 acres, was donated by The St. Joe Company (NYSE: JOE), Florida's largest real estate development company. The estimated total cost of completion is slated at approximately 331 million. Navy officials have announced that the new airport is also scheduled to serve as an aviation security test site including implementation by the Transportation Safety Administration (TSA) of a system that uses wireless cameras, sensors and motion detection devices.

"With a new airport, the opportunity for incredible economic development and real estate expansion is real," says Glick. "There hasn't been an airport built in the U.S. of this magnitude since Denver International and that was over 16 years ago. Do you know what that's going to do to this area?"

The new Panama City - Bay County International Airport has given Infinity Blu, www.infinityblu.com, the opportunity to do something no one else has in Panama City Beach. "I wanted a way to offer second home ownership to everyone," declares Glick. "I wanted it to be affordable, and give the consumer the option of renting or selling. I am not in the timeshare business, nor do I ever intend to be, so I wanted something genuine, and that's when I discovered fractional ownership."

Fractional ownership is a real estate concept that has continued to gain ground year after year. Originally geared towards ski resorts in areas such as Utah and Colorado, fractional real estate has made a big splash with beach front resort owners by providing an innovative way for 2nd home ownership. "Over 90% of our reservations for Infinity Blu have been fractions," boasts Glick. "We have a huge advantage as compared to other resorts on the Emerald Coast, all because of our precedent setting fractional ownership. This concept allows consumers to enjoy the advantages of our amenity rich resort facility, in a suite of their choosing that they return to year after year."

There is yet another Glick innovation and the first of its kind spreading like wild fire in the Panama City area. "Our precedent setting Real Estate Affiliate Program is exploding fractional sales," says Adam C. Berkley, Glick's Affiliate Manager. "Realtors are flocking to this concept from across the entire globe. We provide them their own Infinity Blu branded web sites, training on fractional real estate - it's a win/win proposition, www.joininfinityblu.com ," says Berkley. "The clients of our Affiliates might never otherwise have known about the market. There are so many positives about our program including the potential for price appreciation for the client and the opportunity for up to a 10% referral on our fractional product for the Affiliate Real Estate Agent. Everyone wins!"

"The vision of Nathan Glick is revolutionary," announces CH Smith, senior marketing consultant for Infinity Blu. "Not only is the new ground breaking of this International Airport making history, so is Nathan Glick. At 31 he exemplifies genius, hard work, vision, innovation, and an uncommon natural ability to be in the right place at the right time."

Infinity Blu markets a variety of whole and fractional suites including 1/7th (7 weeks) starting in the $90's and 1/12th (monthly) starting in the 30's. Call 1-888-788-5860 or visit their website at www.infinityblu.com for details.

Realtor/Broker inquiries are welcome by linking to www.youandinfinityblu.com. Business opportunists or venture capitalists should email Nathan Glick at Nathan@infinityblu.com.

Posted by Industrial-Manufacturing at 06:14 AM | Comments (0)

Chief, Industry Leader in Flat Panel TV and Projector Ceiling Mounts, Provides How to Tips to Build Dynamic Ceiling Installations

Chief Manufacturing, the leader in mounting solutions, offers all the mounting equipment needed for any ceiling installation.

Minneapolis, MN. (PRWEB) October 30, 2007 -- projector ceiling mounts or flat panel displays can seem like a difficult and complex task. That's why Chief has compiled a list of helpful steps to aid in any ceiling mount installation. Chief provides a variety of accessories, projector mounts and flat panel ceiling mounts that are sure to fulfill any application need.

Step 1: Choose the Best Structural Adapter
The first step in installing a mount from the ceiling is to determine what type of structure you want to install into. Chief offers a variety of structural adapters to choose from including: wood joist, concrete, truss, pipe, Unistrut®, I-beam, suspended ceiling, angled ceiling and general purpose ceiling plates.

Step 2: Select an Extension Column
Choose between fixed or adjustable extension columns made of aluminum. Chief's CMS™ Adjustable Extension Columns include a notched design for easy length changes. Both fixed and adjustable columns include cable management and access ports for a clean installation. In order to choose the appropriate extension column, you also need to determine the drop distance. Chief's columns come in lengths from 3"-132". Extension column accessories like the CMA640™ Finishing Ring help make any installation successful and provide a finished appearance when aesthetics are important.

Step 3: Choose an In-Line Adapter
An in-line adapter is required for most installations that connect two extension columns together. Choose an adapter based on the desired function or specification requirements. Some of Chief's in-line adapters include:

Couplers: connect two sections of column together
Swivel Adapters: increase viewing flexibility up to 330º
Quick-Disconnect Adapters: make installations easier and more flexible
Storage Adapters: store excess cables and power supplies to clean up installations
Vibration Isolator: balance the projector to reduce vibration
If an in-line adapter is used, a second extension column is required to connect the projector to the adapter.

Step 4: Choose the Right Mount
Chief offers a variety of projector ceiling mounts and flat panel displays. Choose from the RPA™ and RPA Elite™ Series for projectors. The mounts are available in custom or universal options and provide quick installation and low-profile design. The RPA Elite Series is a first-class upgrade to the RPA mounts and offers innovative features, like precise micro adjustments to reduce installation time. Chief also offers non-inverted projector mounts, heavy-duty models and stackers to meet every application need.

Flat panel ceiling mounts are available for small, medium and large displays, and include Centris® Technology for fingertip adjustability and quick installation. To retrofit an existing CRT installation, simply disconnect the existing CRT mount and rethread using Chief's MCS™ or PCS™ Single Ceiling Mounts and an NPT extension column.

About Chief:
Chief Manufacturing, a division of CSAV, Inc. - Chief/Sanus Audio Visual, has more than 29 years of proven product and service excellence. Committed to responding to industry needs in the Pro AV, Residential and Office markets, Chief offers a complete line of mounts, lifts and accessories for flat panel displays and projectors.

Chief continues to design innovative mounting solutions that complement the technology they support. With multiple product awards and patented designs, Chief provides unique mount features, and is recognized for delivering not only quality products, but knowledgeable, helpful customer service.

U.S. and Europe sales offices support a global network spanning the Americas, Europe, the Pacific Rim and beyond. Chief distribution centers are located in Minnesota and the Netherlands. www.chiefmfg.com.

Posted by Industrial-Manufacturing at 06:13 AM | Comments (0)

Coszo Expands and Relocates to Upgrade the Level of Service They Offer

Coszo commits itself to high quality product manufacturing, a great price offering and on-time delivery. They announce office relocation to a larger facility recently, which shows a strong determination to deliver superior customer service.

(PRWEB) October 30, 2007 -- Established as a casting manufacturer for fifteen years, Coszo expanded its production lines and relocated their offices to their factory this September. The move increases efficiency in service for customers. Coszo products all satisfy worldwide original equipment manufacturer OEM applicants, most notably in Europe and America. It also has seen successes in South Asia and India market this year.

To reach annual production capacity of four thousand tons effectively, Coszo attaches great importance to factory management. With ISO9001-2000 and TS16949 certifications, its casting factory is well equipped with a medium frequency induction furnace, a coal furnace, a sand blaster machine, and a wax injection machine. These facilities are adequate support for Coszo's casting process, which includes sand casting, die casting and alloy casting, and gravity casting.

As a primary competitive advantage of Coszo, Coszo's machining center occupies three thousand square meters of floor space. It offers CNC machining, turning, milling, filling, plating, heat treatment, and finishing process, which is an integrated service for wide range OEM casting requirements.

Because Coszo can offer high quality assurance in production, their products include mining machinery parts, steel shaft, pipe fitting, stamping, forge, bucket teeth, vehicle components and structural accessories; all conform to ASTM, AISI, BS, DIN, JIS and JIS standards. In terms of a strong connection with domestic supply chains, Coszo assures its materials are strictly quality controlled, for example, carbon steel, stainless steel, alloy steel, heat resistant steel and ductile iron are fully guaranteed to be of top quality.

Coszo products will pass quality inspections. This procedure means their products are guaranteed to accurately match customized specifications. Quality checks are conducted at every step of the manufacturing procedure from beginning to end. Coszo also welcomes third parties for a final check before goods delivery. Coszo tests are conducted using equipment coordinated to include a measuring machine, spectrum analysis instrument, surface indicator, metallurgical analysis, tensile strength tester, hardness tester, impact test machine etc.

Due to strong teamwork with domestic professional mold-design companies, this collaboration shortens throughput time and enables Coszo to verify molding items to satisfy customers' need.

As casting market is undergoing rapid change, Coszo insists on technological development to meet the competition. Their qualified engineers improve equipment reliability and performance constantly. Coszo also participates in China Foundry Association and will keeps technological exchange with international partners in the near future.

"We understand time is a key element in business, therefore, Coszo makes prompt customer response, within twenty four hours when possible," Coszo General Manager, Mr. Andy Qiu said.

Coszo accepts orders of different quantities, and delivers goods within thirty days for casting products and fifteen days for machining on average. In addition they take good advantage of its location in Ningbo, the second biggest container port of China. Coszo definitely reduces the time and cost of shipment for customers.

Driven by broad market demands, Coszo continues to obtain more international certifications, such as CE and UL. It also takes part in international trade shows at the National Agriculture Exhibition Center, China Dongguan International Mould & Metalworking Exhibition (DMP) and China International Hardware Show 2007 in Shanghai. Coszo is planning to attend SEMA trade show in Las Vegas this year, as well as Hannover Messe 2008 to reach more oversea customers.

Posted by Industrial-Manufacturing at 06:12 AM | Comments (0)

By enabling access to the ADSearch tool, AutoCAD Architecture 2008 users will gain rapid electronic access to thousands of manufacturer's products. Benefits include the ability to:

The Berke Group announced today its partnership with AboutFace, an Atlanta-based mystery shopping company, in a strategic expansion of The Berke Group's sales consulting services.

Atlanta, GA (PRWEB) October 30, 2007 -- The Berke Group is pleased to announce its partnership with AboutFace, an Atlanta-based mystery shopping company, in an expansion of The Berke Group's suite of services to improve sales performance within client organizations. In addition to The Berke Group's proven sales systems, which empower client organizations with the process, knowledge and skills necessary to maximize their sales success in a competitive environment, AboutFace adds a much-needed measurement component to provide objective feedback regarding salespeople's performance.

"The old business adage 'without measurement, there can be no improvement' is absolutely true," notes The Berke Group's Sales Practice Leader, Jon Fogg. "AboutFace's mystery shopping programs will provide our clients with objective, actionable feedback regarding how effectively their salespeople are implementing the sales systems and techniques with which The Berke Group is equipping them. AboutFace enables us to 'close the performance loop' so to speak."

The Berke Group's sales practice meets salespeople at their point of need - how to help customers buy in an increasingly competitive environment in which the rules are always changing and competitors are all offering the same promises. With proven success in one of the toughest markets today, new home sales, The Berke Group teaches salespeople how to differentiate themselves through building strong customer relationships vs. relying on sales methods that are no longer viable in the current environment.

"There is only so much information that can be gleaned from sales numbers," shares Fogg. "Our partnership with AboutFace enables us to offer clients insight into how effectively their salespeople are implementing the principles we're helping them learn. We're able to reinforce strengths, nip bad habits in the bud, and measure progress to ensure sales process is aligned with sales success."

The Berke Group was attracted to AboutFace's mystery shopping programs due to the unique depth of the company's commitment to helping clients understand how their salespeople are perceived by customers. While most companies try to lessen the amount of detail their mystery shoppers submit, AboutFace encourages thoroughness, knowing their clients can't improve something they don't fully understand. Moreover, AboutFace's sophisticated, yet easy-to-use, online reporting system provides clients with 24/7 access to mystery shop results, as well as a host of features designed to equip them with the information needed to continually improve sales performance.

"We are thrilled to be working with Paige Hall, President and CEO of AboutFace, and her outstanding organization," notes Kelly Land, President of The Berke Group. "We feel our priorities are very much aligned in terms of partnering with our clients to facilitate improvement in their sales organizations. We look forward to the upcoming year and to driving meaningful, measurable results for our clients."

About The Berke Group

The Berke Group is an assessment and consulting company specializing in employee selection, management, retention, and sales performance. We are creators of the Berke Assessment, an online hiring assessment measuring candidates' natural talents, behaviors and personality traits against job requirements and company culture. For more information on The Berke Group's sales practice, call us at 888-220-7611 or visit our website at www.berkegroup.com.

About AboutFace

Founded in 1994, AboutFace™ is the world's premier mystery shopping company. An Atlanta-based company whose sole focus is improving a client's business, AboutFace uses mystery shopping and follow-up training to help companies and teams reach their full potential. Its secret shopping programs effectively allow clients to hold a mirror up to their business, urging them to look inward and discover all that is good and not so good about how they operate.

Contact:

Kara Land, Director of Marketing
The Berke Group
404-262-7009

Posted by Industrial-Manufacturing at 06:11 AM | Comments (0)

Architectural Data Systems Gives AutoCAD Architecture 2008 Subscribers Access to ADSearch

Architectural Data Systems (ADS), a leading provider of online document production tools and solutions, today announced that subscription customers of AutoCAD Architecture 2008 software (formerly Autodesk Architectural Desktop) -- now have access to ADSearch -- an extensive attribute-based building product search engine from ADS.

Katonah, NY (PRWEB) October 30, 2007 -- Architectural Data Systems (ADS), a leading provider of online document production tools and solutions, today announced that subscription customers of AutoCAD Architecture 2008 software (formerly Autodesk Architectural Desktop) -- now have access to ADSearch -- an extensive attribute-based building product search engine from ADS. Through the ADSearch technology, AutoCAD Architecture 2008 users can quickly retrieve a broad array of manufacturer catalogs and digitally search, compare, and manage project product data made available by ADS.

"We are thrilled to now be able to offer this very powerful gateway to AutoCAD Architecture 2008 users to help simplify the management of multiple manufacturer catalogs and product data, and streamline workflow," said Chuck Williams, CEO of ADS. "Our initiative with Autodesk -- via the ADSearch tool -- modernizes the laborious and manual process of searching manufacturers' sites and reference materials, making it more efficient, less time consuming, and painless. This is a very exciting advancement in the architectural industry, and we are ecstatic to be at the center of it all."

By enabling access to the ADSearch tool, AutoCAD Architecture 2008 users will gain rapid electronic access to thousands of manufacturer's products. Benefits include the ability to:

Automatically capture and store selected data in the user's spec sheets until the user decides how, what and when to save based on specific traits the user requested for the design.
Integrate AutoCAD Architecture 2008 with product selection and spec writing.
Allow product-to-product search and compare capabilities in one search result.

"Connection to the ADSearch tool will provide AutoCAD Architecture software users with access to an extensive library of manufacturer catalogs," said Jim Lynch, vice president of marketing, Autodesk AEC Solutions. "This collaboration is the latest example of our ongoing commitment to supporting established industry processes and the large AutoCAD Architecture community."

Pricing and Availability:
AutoCAD Architecture 2008 subscription customers can gain access to the ADSearch tool through the members-only Subscription Center at Autodesk.com/subscription. For more information on the ADS Search tool, go to: www.architecturaldatasystems.com.

About Architectural Data Systems (ADS)
ADS is a leading provider of online document production tools and solutions; designed by architects for architects. ADS offers a menu of revolutionary product and service solutions that encapsulate a suite of electronic productivity tools designed to allow the user to bridge the gap between traditional practice and newer ways of working and thinking. ADS software automates the specification process by allowing architects to select attributes of products and materials through a menu-driven system. For more information about ADS visit: http://www.architecturaldatasystems.com/

Autodesk and AutoCAD are registered trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.© 2007 ADS. All rights reserved.

Posted by Industrial-Manufacturing at 06:10 AM | Comments (0)

Delta Parts - Newest Line of Tool Parts Offered on eReplacementparts.com

Thousands of Delta parts now offered on eReplacementparts.com.

Sandy, UT (PRWEB) October 30, 2007 -- Customers can buy more brand name tool parts from eReplacementparts.com as they continue to grow. Delta is the newest brand offered in their ever expanding product line of tool parts. EReplacementparts.com now offers eight major tool manufacturers, Delta being the most recent addition. Dave Fairbanks, co-founder of eReplacementparts.com commented on this newest addition. He said, "Our goal is to eventually supply parts for all major tool part brand names to service all customers regardless of brand preference."

When eReplacementparts.com started, they carried only Makita parts. Now they have added six additional tool part product lines: DeWalt, Bosch, Skil, Milwaukee, Porter Cable, and now Delta. "You can now find Delta parts for hundreds of Delta tools," Fairbanks added. eReplacementparts.com carries delta parts for band saws, chop saws, drill presses, grinders, planers, miter saws, table saws and more.

In addition to expanding their product line, eReplacementparts.com has been streamlining their websiteto include more up to date inventory information. This newest technical feature allows customers to see in real time if the parts are available for purchase. Shipping options have also expanded to include quicker delivery.

Posted by Industrial-Manufacturing at 06:09 AM | Comments (0)

Flat Roofing Systems, IB Roofing Systems, Now Available From Classic Metal Roofs For Property Owners In Massachusetts, Rhode Island, Connecticut, And New Hampshire

IB Roofing Systems are now available, for Flat Roof or low-pitched roof property owners in Massachusetts, Rhode Island, Connecticut, and New Hampshire, from the roofing experts at Classic Metal Roofs, LLC. These durable roofing systems have had no material failures in their 28 years of installation and come with extensive warranties that include a no maintenance clause.

Boston, Massachusetts (PRWEB) October 30, 2007 -- IB Roofing Systems are now available for flat or low-pitched roof property owners in Massachusetts, Rhode Island, Connecticut, and New Hampshire. Classic Metal Roofs, LLC now offer one of the best Flat Roofing systems available on the market, completely installed by only trained and certified IB Roofing System installation experts. Each professionally installed Flat Roofs system comes with a lifetime warranty for residential properties and up to a 25 year warranty on commercial properties.

The IB Roofing System uses a perfectly engineered blend of polymers and elastomers to create the only single-ply membrane Flat Roofing system to provide superior flat or low-pitched roofs quality covering better than the traditionally used EPDM rubber roofing. The IB Roofing System will keep Massachusetts Flat Roof, Rhode Island Flat Roof, Connecticut Flat Roof, and New Hampshire Flat Roof property owner's dryer, eliminate the need for costly future repairs or maintenance, and is proven to outlast traditional Flat Roof systems by years. In fact, in 28 years of installation and service these Flat Roofing systems have never had one documented case of material failure. IB Roofing Systems are engineered to withstand prolonged exposure to ultraviolet rays, snow, hail, rain, ponding water, micro-organisms, chemical pollutants and the most extreme of weather conditions from the extremely cold to the scorching hot. The IB Roofing system can also be engineered to withstand uplift winds of 120 kilometers an hour.

IB Roofing Systems provide property owners a Massachusetts Flat Roofing system which provides a waterproofing sheet which remains waterproof throughout its expected lifetime. A Rhode Island Flat Roofing system that is non-flammable. A Connecticut Flat Roofing system that meets building codes across America and is easy to work with and repair. And a New Hampshire Flat Roofing system that is weldable and pliable at any temperature.

The benefits of the IB Roofing System for flat or low-pitched roofs can be shown simply in the knowledge that all McDonald restaurants in the Puget Sound area have IB Roof Systems installed. These roofs are more resistant to contaminants that collect on Flat Roofs, 100% non-prorated, and the only single-ply membrane with a residential lifetime warranty that is transferable to a new owner and does not require a maintenance program. These systems use hot air welded seams, rather than chemically activated hot air welded seams, creating a physical weld stronger and less erosive than a chemical weld. The membrane is 50% top film and 50% base film, making it easy to weld and giving it a good thickness above the scrim. The membrane has 60% elongation allowing it to flex and move with the building, while industry standards require a material with only 15% elongation.

The benefits of these roofing systems are immense. For the property owner the benefits of installing one of these roofing systems on their residential or commercial property far out weighs any cost and is shown to increase the value of the property itself. The IB Roofing System is the only single-ply roofing membrane designed after the ASTM chemical containment liner standard, and is a Class A Fire Rated product that will not support combustion. Flat or low-pitched roof property owners in the New England area can now get this superbly engineered IB Roofing System from Classic Metal Roofs, LLC.

For more information about Metal Roofing, IB Roofing Systems, to explore the full line of available products, to make an appointment with a Classic Metal Roofs, LLC expert roofer about Flat Roof or Metal Roof options for your property, or to sign up to receive a free copy of An "Insider's Guide To Metal Roofing," please visit the official website of Classic Metal Roofs, LLC at: http://www.classicmetalroofs.com Or call Toll Free: 1-866-660-6668.

Contact Information:
Mike Gonet
Boston, Massachusetts
Classic Metal Roofs, LLC
Toll Free: 1-866-660-6668
http://www.classicmetalroofs.com

Posted by Industrial-Manufacturing at 06:09 AM | Comments (0)

Sustainability in the Global Paint Industry –- Performance Technology That is Also Better for the Environment

The global paint and coatings industry is doing its part to build a safer, greener and more sustainable world. These were the observations of Luis Fernandez, Vice President and Global Business Leader for Rohm and Haas’s $2 billion Paint and Coatings Materials business, when he addressed ABRAFATI, the Brazilian Paint Manufacturers Association, late last week.

Philadelphia, PA (Vocus/PRWEB ) October 30, 2007 -- The global paint and coatings industry is doing its part to build a safer, greener and more sustainable world. These were the observations of Luis Fernandez, Vice President and Global Business Leader for Rohm and Haas’s $2 billion Paint and Coatings Materials business, when he addressed ABRAFATI, the Brazilian Paint Manufacturers Association, late last week.

Fernandez noted that the term ‘sustainable development’ today is seen and heard everywhere, and pursued eagerly by responsible leaders in every industry. “And so it should be,” he said. “Industrial activity has a significant impact on economic development, social development and the environment around the world.”

He explained that the global paint industry has been making the shift to more environmentally advanced technologies for more than 50 years, when water-based, acrylic emulsions were introduced by Rohm and Haas for use in house paints. Today, clean water-based technologies are used around the world, accounting for about 70 percent of the total U.S. paint and coatings market; 30 percent and growing across Asia.

“Yet, while our neighbors and our customers want us to develop cleaner technologies, they also require that these new, greener products provide equivalent or better performance compared to traditional technologies,” said Fernandez. He noted that cutting-edge technologies – nanotechnology, bio-based, and more – are on the way. Just as important, Fernandez said water-based acrylic technology has advanced to the point that it is increasingly used in some of the toughest industrial coatings applications, where less desirable, solvent-based products have been traditionally used. These solvents create volatile organic compounds, or VOCs, which contribute to air pollution.

Fernandez also spoke about extensive community outreach and education programs that paint company and paint material suppliers operate across the globe. These include outreach and help in rebuilding after a natural disaster, to ongoing training programs that help build a strong network of professional painters and contractors who know how to bring quality products and services to their customers.

“Sustainable development is about meeting the needs of the present . . . and the needs of the future,” said Fernandez. “It’s about social responsibility, environmental protection, and healthy economic growth – to often-called ‘triple bottom lines’ of sustainable development. . . . I am proud and happy that our industry has seized the initiative and is responding to the challenges that creating a better world presents,” he continued. “We are making the world look better – and making a better world for ourselves and our children at the same time. This is what will make our industry sustainable for many years to come.”

Note: Rohm and Haas featured a number of environmentally advanced products at the ABRAFATI Show last week. To learn more follow these links: Avanse™ 412 low VOC, decorative resin, Avanse™ MV-100 high performance waterborne technology, Acrysol™ RM 895 solvent free, low VOC Rheology Modifier, Fastrack XSR extended use road marking technology that reduces VOCs by eliminating the need for epoxies and thermoplastics, Fastrack HD-21A low VOC coating for heavier than normal line marking for optimum reflectivity and sightline safety

About Rohm and Haas Company
Leading the way since 1909, Rohm and Haas (NYSE: ROH) is a global pioneer in the creation and development of innovative technologies and solutions for the specialty materials industry. The company’s technologies are found in a wide range of industries including: Building and Construction, Electronics and Electronic Devices, Household Goods and Personal Care, Packaging and Paper, Transportation, Pharmaceutical and Medical, Water, Food and Food Related, and Industrial Process. Innovative Rohm and Haas technologies and solutions help to improve life everyday, around the world. Based in Philadelphia, PA, the company generated annual sales of approximately $8.2 billion in 2006. Visit www.rohmhaas.com for more information. imagine the possibilities™

Contact:
Laura Hadden
Rohm and Haas
Phone: +1 (215) 592-3054
E-mail: lhadden(at)rohmhaas.com

Posted by Industrial-Manufacturing at 06:08 AM | Comments (0)

Penetron Singapore -- Over a Decade of Building on Foundations of Service and Performance

After more than a decade of experience and successful applications, Penetron continues to be a leading crystalline waterproofing solutions provider in Singapore's ambitious development plans.

East Setauket, NY (PRWEB) October 30, 2007 -- For more than 12 years, Penetron had been serving the market of Singapore from its base in China, meeting the challenging construction conditions with successful Penetron crystalline waterproofing solutions. With numerous projects in its portfolio and an ever burgeoning construction market, Penetron Singapore Pte Ltd was established in 2006. This provided even greater attention to the market through an efficient distribution of the Penetron range of products and continuous technical and application support to architects, engineers and contractors.

Mr. Gary Loh, who played a big role in Penetron's success there and was appointed General Manager of Penetron Singapore, commented that, "this setup further displays Penetron's dedication and long-term commitment to the Singapore market and the entire region by providing superior waterproofing products that are trusted and appreciated by architects, designers, consultants, engineers, developers and applicators the world over."

Singapore is a nation made up of 63 islands, including the Singapore mainland. Since the 1960's, Singapore has had on-going land reclamation projects with earth obtained from its own hills, the sea-bed, and neighboring countries. As a result, its land area grew from 581.5 square kilometres (224.5 sq mi) in the 1960s to 704 square kilometres (269.1 sq mi) today, and may grow by another 100 square kilometres (38.6 sq mi) by 2030. The projects sometimes involved some of the smaller islands being merged together through land reclamation in order to form larger, more functional islands, such as in the case of Jurong Island.

Development and construction on reclaimed land generally poses waterproofing challenges and this is one of the many reasons the architectural, engineering and design community has come to rely on and trust the Penetron system. Penetron has proven its performance and superior effectiveness in a variety of independent laboratory tests and through numerous successful projects. In the process, Penetron has gained the trust and confidence of many satisfied clients including Ascendas, CapitaLand, CDL, CPG Consultants, Far East, Maple Tree, and many more.

Recent Penetron projects include the Changi Airport Terminal 3, Vivo City, The Sail at Marina Bay and the latest development by Ascendas known as Foodxchange. On these projects alone, and in addition to the other products that will also have been used to surface treat various areas, more than a quarter of a million cubic yards of concrete will have been treated with Penetron Admix.

Penetron's efforts in Singapore were summed up by its CEO Robert G. Revera when he said, "Penetron will continue to listen to our markets to provide region specific solutions and will forge ahead meeting every need of the engineers, designers, architects and contractors, offering superior products, service and support."

ICS Penetron International, Ltd., is a leading manufacturer of integral crystalline waterproofing and repair products for concrete with a manufacturing and service network that spans more than 60 countries. For more information on Penetron products, please visit our website at www.penetron.com or contact Ann Martucci at 631-941-9700.

Posted by Industrial-Manufacturing at 06:08 AM | Comments (0)

IVI Overseeing Trump's 96-Story Chicago Tower

Inspection Valuation International Inc. (IVI) is overseeing the construction of the Trump International Hotel and Tower, located in downtown Chicago, Illinois.

New York, NY (PRWEB) October 30, 2007 -- Inspection & Valuation International, Inc. (IVI) was retained on behalf of the construction lender to be its consultant on the development of Trump International Hotel and Tower, located in downtown Chicago, Illinois.

The Trump Organization is developing the project with Skidmore Owings & Merrill, engaged as the architect, and Bovis Lend Lease as the construction manager. The 96-story, 2,600,000 SFG mixed-use tower will include 472 super luxury residential condominium units and 286 5-star hotel guestrooms. Construction is expected to be completed in 2009. Upon completion, it will be the second tallest building in Chicago behind the Sears tower.

On behalf of the construction lender, IVI is providing project management oversight services consisting of construction cost control; reviewing contract drawings and specifications; and the reviewing of construction and building loan documents, schedules, permits and approvals. IVI is also providing payment requisition disbursement control services and ensuring general compliance of construction with the project documents.

About IVI
Since 1973, IVI has been the first destination for institutional and private mortgagees, and equity investors seeking construction consulting/real estate development advisory services. Offices are located in New York, Miami, Washington DC, Chicago and Los Angeles, with affiliate offices in London and Paris.

Inspection & Valuation International, Inc.
55 Red Oak Lane
White Plains, NY 10604 October 26, 2007

Contact:
Claudette Hussey
800-778-4139
claudette.hussey@ivi-intl.com

Posted by Industrial-Manufacturing at 06:07 AM | Comments (0)

'What everybody ought to know about estate agents fees and why No Sale No Fee = No Sense' Report Released

The report examines why estate agents charge such high fees and why a fairer, less expensive model is now possible. The report's aim is to shake up the estate agency industry in the UK and inform people why it's now possible to sell their house for thousands less than they're currently being charged. The internet and dominance of Rightmove are just two of the factors that are evolving the UK's property market.

(PRWEB) October 30, 2007 -- Property specialists Dominic James have this week released a new report that explains why estate agents charge such high fees, and shows why a new, fairer model is possible that saves sellers thousands. The report is expected to shake up the way people sell houses and force the UK estate agency industry to evolve from its dated and expensive 'No Sale No Fee' model.

It's only recently that the circumstances have been right to change the way people sell their homes. The popularity of the internet and Rightmove's dominance of the online property market are just two of the factors that have made Dominic James' new model possible.

"For years expensive high street estate agents have been the place to find buyers," said Dominic James consultant Ian Stuart, "But now a new model exists that doesn't require estate agents for finding buyers. We've realised and accepted that the role of the estate agent has to evolve."

The report has been released as part of the launch of Dominic James' new approach to estate agency, and to educate sellers on why the existing model is dated and flawed. Dominic James' model is unique in that it utilizes Rightmove's massive audience of buyers and charges a flat fee, rather than the industry's usual percentage of a property's value.

Supermarket chain Tesco recently shone the media's spotlight on the growing popularity of internet property sales. Their first venture Tescopropertymarket.com had to be withdrawn because it was deemed, by the Office of Fair Trading, to be conducting estate agency work without providing estate agency services, which would put them in breach of the Estate Agents Act 1979.

Tesco are, however, undeterred as they understand there is a golden opportunity to overhaul the current outmoded and expensive method of selling homes in this country. They also understand that their previous model was unworkable without being able to list properties on Rightmove, but their recent application to Rightmove has been denied so they will have to seriously re-think their strategy.

Dominic James can get properties listed on Rightmove and their model combines the expertise of an estate agency with the low cost of an internet sale, allowing sellers to save thousands compared with other high street agents.

The report can be downloaded for free from Dominic James' website ( http://www.domjam.co.uk ) and it's anticipated to make people think twice about how they sell their property, and redefine the estate agency model.

Posted by Industrial-Manufacturing at 06:07 AM | Comments (0)

eDynaQuote and Luthin Associates Team Up to Save Over $2.5 Million on Electricity and Fossil Fuels with Reverse Auction

A major university in New York saved over $2.5 million on its energy costs last quarter through a competitive purchasing process powered by eDynaQuote and managed by Luthin Associates. The savings were realized using eDynaQuote's proprietary reverse auction software which enabled this university to procure electricity, gas and oil contracts from energy suppliers in a highly competitive process.

Erie, PA (PRWEB) October 29, 2007 -- A major university in New York saved over $2.5 million on its energy costs last quarter through a competitive purchasing process powered by eDynaQuote and managed by Luthin Associates. The savings were realized using eDynaQuote's proprietary reverse auction software which enabled this university to procure electricity, gas and oil contracts from energy suppliers in a highly competitive process. Luthin Associates Inc., of Avon by the Sea, New Jersey, was hired as the university's energy management consultant for the bid.

The process involved two reverse auctions, one for electricity and one for gas and oil. During these two auctions almost 200 bids were issued by eight energy suppliers. The two reverse auctions lasted approximately four hours and were characterized by frequent bidding and price reductions. This highly competitive process was made possible by the ease of use of the eDynaQuote auction platform, the energy management expertise of Luthin Associates, and the university's willingness to use a state-of-the-art, high tech solution to ensure competitiveness in their procurement process.

eDynaQuote offers Internet-based competitive bidding services and consulting for businesses, organizations, and governments. eDynaQuote used its proprietary reverse auction tool that enables bidders to know immediately where their bids rank, and allows them to alter their bids immediately if they choose.

"The staff at eDynaQuote was very easy to work with and was there to help us every step of the way," said Catherine Luthin, President of Luthin Associates Inc. "Plus, their reverse auction system exceeded our expectations for ease of use and intuitiveness."

The reverse auction is a process used in many procurement areas and has recently become an important tool for energy procurement. In standard auctions, there is a single seller offering a product and multiple purchasers compete for the right to purchase it. In a reverse auction, the opposite occurs. There are multiple sellers all competing for the right to sell their product to a single buyer. Prior to the introduction of the reverse auction platform, energy procurement bids were done manually through telephone calls, faxes and emails. This process was cumbersome and the lowest bidder could at times be excluded due to logistics, e.g. the fax may be busy.

Using the eDynaQuote platform, the process is streamlined and allows for continuous bidding until all of the suppliers provide their lowest bid. Before the process begins, the energy consultant, customer and suppliers, agree on contract terms and conditions. Once the auction begins, the bid documents are available to all suppliers online in eDynaQuote, so bidders have easy access to the most up-to-date specifications that they needed to formulate a bid. And instead of submitting sealed bids via phone, fax, email or paper, they simply register with eDynaQuote and sign in to the secure site on the announced day and time of the auction to place their bids.

"This success proves that eDynaQuote has the flexibility and experienced staff on hand to service any organization that wants to engage in strategic e-procurement activities," said Bret Grady, CEO of eDynaQuote.

Doug Luthringer, eDynaQuote's Client Development Manager said, "The two major reasons why this event was so successful was the clear specifications that Luthin Associates wrote, and the competitive format of a live reverse auction. When bidders know exactly what they are bidding on and know exactly where they rank real-time among their competition, it makes for a very competitive situation."

"eDynaQuote™ offers a powerful, yet easy-to-implement on-demand solution that helps clients streamline the purchasing process to save potentially millions of dollars. eDynaQuote offers professional support and provides full-service help-desk support which allows clients to choose from among a variety of service levels to address specific needs, including full-service reverse auction management or self-service auction management options.

For additional information, visit http://www.edynaquote.com

Posted by Industrial-Manufacturing at 06:06 AM | Comments (0)

Atlanta Roofing Contractor is "Next Version" of Roofer

Tired of the same old approach to roofing, Atlanta man opens his own version of a residential roofing provider serving the metro Atlanta area.

Atlanta, GA (PRWEB) October 29, 2007 -- Giovanni Rueda was tired of what he was seeing in the Atlanta roofing market. Roofs being half completed, properties being trashed, and consumers getting ripped off all led him to think about starting his own operation.

"I wanted to make a difference," Rueda says. "When you have a metropolitan area as big as Atlanta, you're gonna have a number of bad roofing providers who are more concerned about taking money than serving the customer."

Rueda's solution? Start your own Atlanta roofing company and not only do a good job, but take the extra step. And so iRoof was launched in June. While there is a subtle reference to technology in the name, the word "i" is really meant to reference the focus on the customer. In fact, the company's core message is 'I Want a Dream House, I Need a Dream Roof, iRoof'.

Rueda's approach is to put the emphasis on what the customer's vision is rather than what they perceive it to be. Of course, many times customers may not know what they want. In these cases, iRoof will take the lead by making recommendations based on the customer's budget.

Perhaps the thing that most epitomizes iRoof's willingness to serve are the target areas they focus on. While most roofers target a certain area in town, they travel all over the metro area, which is a job in and of itself. If you're looking for a roof in Peachtree City, give us a call," says Rueda. "We have customers all over. We have customers south of Atlanta in Fayetteville, Jonesboro and McDonough; east in Decatur, Snellville and Lawrenceville; and north in Duluth, Alpharetta and Cumming. We'll come to you…just give us a call."

Their approach seems to be working…they now have seven crews and growing.

Posted by Industrial-Manufacturing at 06:06 AM | Comments (0)

New Guide Gives Tips to Design a Kitchen for Your Lifestyle

Premier cabinet company allows consumers planning a kitchen remodel to merge everyday activities into the style of their homes.

Sioux Falls, SD (PRWEB) October 29, 2007 -- Recognizing that every household has different needs when it comes to creating a kitchen, a leading cabinet company offers the new guide "6 Tips to Designing a Kitchen for Your Lifestyle."

StarMark Cabinetry gives advice to families with children, to couples who enjoy entertaining, to those who may need to renovate their home for handicap accessibility, and to anyone who wants to showcase collectibles. http://www.starmarkcabinetry.com/tips.php

"We wanted to show the typical homeowner out there that they, too, can have a beautiful kitchen that suits their style," said John Swedeen, president of StarMark Cabinetry. "You can build new or renovate an existing kitchen with every bit of your personality in it."

The cabinet company gives readers ideas to better fit their home designs into how they spend their time. A tech-savvy family could install hidden stereo speakers inside cabinets. A home with multiple cooks can benefit from two prep areas with plenty of countertop space. A newly married couple can display their China in custom-designed cabinetry. Swedeen encourages families to think outside the box when it comes to kitchen remodeling.

About StarMark Cabinetry:
StarMark Cabinetry is a Sioux Falls, S.D.-based cabinet company that allows consumers to customize their bathrooms and kitchens with their favorite woods, styles, embellishments and finishes.

Posted by Industrial-Manufacturing at 06:05 AM | Comments (0)

October 26, 2007

Navtrak: Independent Study Reveals Mobile Field Service Solutions Improve Overall Service Profitability By 27%

Aberdeen study reveals Best-in-Class companies post significant gains in service profitability, contract compliance and first call fix rates.

Salisbury, MD (PRWEB) October 26, 2007 -- Among service organizations recently surveyed by the Aberdeen Group, a Harte-Hanks Company (NYSE: HHS), companies that have implemented leading practices like automation and mobile field service solutions have improved service level agreement compliance 23% and overall service profitability 27%.

The recently published study, underwritten in part by Navtrak, entitled "Making Money via Mobile Field Service," found that field service organizations are successfully implementing strategies to create automatic linkage between headquarters operations and technicians in the field. Mobile applications are being deployed to aid scheduling and dispatch, work order management, advanced technician and vehicle locating and the capture of data surrounding equipment status and performance.

Navtrak's recent agreement with InfoLogix, Inc. (NASDAQ: IFLG), a leading technology provider of enterprise mobility and RFID solutions, enables the companies to jointly provide a complete 'single source' mobility solution for the fleet management industry, harnessing the advanced capabilities of Navtrak's GPS-based resource management services and InfoLogix's suite of enterprise mobility solutions - ranging from inventory and work order tracking, to signature capture, automated dispatching/scheduling and more.

"Top organizations are utilizing mobile technology for far more than basic
communication," said Micky Long, Research Director at the Aberdeen Group and coauthor of the report. "By leveraging mobility hardware and robust software applications, service organizations are providing technicians with better, more timely information about service requests, enabling service managers to better track service assets and are enabling technicians to capture and communicate completed information back to headquarters."

"Navtrak's mission has always been to help mobile workforce organizations to be more efficient and productive, enabling them to grow their business," said Jim Duncan, President of Navtrak. "The combination of InfoLogix's unique ability to provide complete 'single source' mobility solutions, together with the advanced capabilities of Navtrak's GPS-based resource management services, will provide the comprehensive, integrated, easy-to-manage mobile enterprise solution that service and delivery companies have been looking for," Duncan said.

Micky Long recommends that service organizations consider the following strategies to better position themselves to meet customer service needs:

Enable real-time two-way data flow among all elements of the service chain
Use mobile technology to capture accurate information on serviceable assets
Develop company-wide service intelligence knowledge base
Provide service technicians with personalized performance information

Nearly 350 companies participated in this quantitative study, including Abbott Diagnostics, ADT, Cummins, Inc., IBM Global Services, Marathon Oil, and Northrop Grumman.

Underwriters of the Mobile Field Service study are: Navtrak Inc., Dexterra, Panasonic
TOUGHBOOK, Sprint/Nextel and MobileFrame.

To obtain a complimentary copy of the report, please follow this link:

www2.navtrak.net

About Aberdeen Group, a Harte-Hanks Company
Aberdeen is a leading provider of fact-based research and market intelligence that delivers demonstrable results. Having benchmarked more than 30,000 companies in the past two years, Aberdeen is uniquely positioned to educate users to action: driving market
awareness, creating demand, enabling sales, and delivering meaningful return-on investment analysis. As the trusted advisor to the global technology markets, corporations turn to Aberdeen™ for insights that drive decisions.

About Navtrak, Inc.
Navtrak utilizes advanced wireless, GPS, Internet and database technologies to deliver operational visibility and flexibility to fleet managers - resulting in improved operating margins, productivity, security and customer satisfaction. Navtrak transforms real-time, location-based data into actionable business intelligence that is easily integrated into customers' existing back-end systems. For more information visit www.navtrak.net or call 800-787-2337.

About InfoLogix, Inc.
InfoLogix is a leading provider of technology and RFID based intelligence solutions that enable the mobile enterprise. InfoLogix uses the industry's most advanced technologies to increase the efficiency, accuracy, and transparency of complex business and clinical processes for the healthcare industry and the commercial marketplace. With 19 issued patents, InfoLogix provides mobile managed solutions, on-demand software applications, mobile infrastructure products, and strategic consulting services to over 2,000 clients in North America including Adventist Health, Universal Health Services, Stanford School of Medicine, Kraft Foods, Merck and Company, General Electric, News America Corporation and Mercedes Benz. Founded in 2001 and headquartered in suburban Philadelphia, PA, InfoLogix has been named the sixth fastest growing new business in the United States for the last three years by Entrepreneur Magazine. InfoLogix is a publicly-traded company (NASDAQ: IFLG). For more information, visit www.infologixsys.com.

Contact:
Rod Whisner
800-787-2337
Rod.whisner(at)navtrak.net

Posted by Industrial-Manufacturing at 06:16 AM | Comments (0)

Update Floors With Stained Concrete Techniques for Holiday Entertaining

Concrete staining offers a variety of decorative options for concrete floors. To learn more about this popular application, view photos, and find a local contractor to start on your project, visit ConcreteNetwork.com.

Yucaipa, CA (PRWEB) October 26, 2007 -- As one of the hottest topics being researched on The Concrete Network website, it's no wonder that homeowners are turning to stained concrete to update their home's interior concrete floors for the upcoming holiday season. These trendy floors have long been found in retail stores, restaurants, and offices, but now, they can be found in homes, as well.

The great news it is that there are unlimited design options, color possibilities, and application techniques to choose from that are sure to meet every homeowner's needs. The Concrete Network, the largest and most comprehensive source for concrete information anywhere in the world, provides a wealth of information for enhancing your floors with concrete staining on its website.

Concrete staining imparts a luxurious richness that can't be achieved by any other coloring medium while leaving behind a permanent, flake-proof color. The stain can even be applied to most existing concrete, making it an ideal solution for revitalizing lackluster surfaces. Depending on the color and application techniques used, the results can mimic everything from polished marble to tanned leather to natural stone or even stained wood.

For a multitude of design ideas and coloring options check out the site's online interior concrete floors photo gallery filled with examples for enhancing your interior floors from ordinary to extraordinary using this decorative technique.

Established in 1999, The Concrete Network's purpose is to educate consumers, builders, and contractors on popular decorative techniques and applications. These include stamped concrete, stained concrete floors, concrete countertops, polished concrete, and much more. In July 2007 The Concrete Network Website had over 1.3 million visitors researching decorative concrete.

The site excels at connecting buyers with local contractors in their area through its Find-A-Contractor service. The service provides visitors with a list of decorative concrete contractors throughout the U.S. and Canada, and is fully searchable by 23 types of decorative concrete work and 202 regional areas throughout North America.

Article photos courtesy of Stained Concrete by Peyton & Associates.

Posted by Industrial-Manufacturing at 06:16 AM | Comments (0)

The Fireplace Mantels of François & Co. Highlighted the Opening of the New Los Angeles Showroom

The Fireplace Mantels of François & Co. Highlighted the Opening of the New Los Angeles Showroom. The Opening was Co-Hosted by Architectural Digest, and Featured an Original Thierry François Design the "Marie-Antoinette."

Atlanta, GA (PRWEB) October 26, 2007 -- The Fireplace Mantels of François & Co. highlighted the opening of the new Los Angeles Showroom. The opening was co-hosted by "Architectural Digest," and featured an original Thierry François design the "Marie-Antoinette." The entire Collection of award winning designer can be seen at François & Co at www.francoisandco.com.

The "Marie-Antoinette," is just one fireplace mantel, and an original design of Thierry François who founded the company in 1998. Today François & Co. is a premiere source for Hand-Carved Limestone fireplace mantels, stone fireplace mantels, fine Hand-Crafted Scagliola Stone™, Bathtubs, Stone Kitchen Hoods, and Architectural Accents.

The new Los Angeles Showroom features several Hand-Carved Limestone Fireplace Mantels, and unique Fireplace Mantels in Scagliola Stone™. The François and Co. Showroom also features two Baroque Consoles with Marble-Tops, and a set of antique chairs covered in damask that are complement beautifully the French-inspired stone mantels. "It demonstrates François & Co.'s commitment to showing its products in a fashionable setting" explains Jean-Christophe Pandolfi, Director of Sales.

Earlier this year, François & Co. introduced the "Heritage Collection," that includes a new line of Limestone Fireplace Mantels. The "Heritage" collection is comprised of exceptional antique fireplace mantels purchased in France. Each of these masterpieces has a history of its own. The fine artisans of François & Co. then bring each piece to vibrant life by meticulously carving a mirror image, perfect down to the tiniest detail. Each resulting replica is available in hand-carved limestone or Scagliola Stone™. The Heritage Collection fireplace mantels emulate the appearance and preserve the legacy of original masterpieces, thus providing a true sense of history and timeless beauty to any modern home.

The new Showroom also showcases - in a French inspired décor - several Scagliola Stone™ fireplace mantels. As rich in texture as it is in history, Scagliola is a technique developed by impoverished Italian monks in the 17th Century to restore their monastery. It is the art of mixing together chips of stone (Scaglia in Italian), stabilizing agents and pigments, and layering the mixture by hand to achieve a material indistinguishable from natural stone. The precision and intricate detail possible with this method is truly astonishing. The Scagliola Stone™ is a noble, authentic alternative to lesser cast stone and concrete products. The François & Co. hand-made Scagliola Stone™ fireplace mantels feature intricate details, impossible to achieve with cast stone or lightweight concrete.

Visit the Showrooms of François & Co. in Atlanta, Orlando, Charlotte, and now in Los Angeles, California or visit online and see each one of the original Collections.

About François & Co.
François & Co. is the parent company of Stone Age Designs which opened in Atlanta in 1998. Since then, the Atlanta-based Company has developed a stellar reputation for its fine Hand-Carved Limestone Fireplace Mantels and fine Hand-Crafted Scagliola Stone™ Fireplace Mantels, Kitchen Hoods, Bathtubs, and Architectural Accents.
The fireplace designs of François & Co. have become well known and respected amongst homeowners, as well as with Interior Designers and in the Architectural and Builder Communities.
In addition to its 9,000-square-foot Showroom and Headquarters in Atlanta, François and Co. has Showrooms in Orlando - Winter Park, Florida, Charlotte, North Carolina, and in Los Angeles - West Hollywood, California. You may contact François & Co. at 1-866-385-9486 or visit them online at http://www.francoisandco.com/

Kathee Austin
(480) 998-0246

Posted by Industrial-Manufacturing at 06:14 AM | Comments (0)

Stone Age Designs Fireplace Mantels Selected for the Suites of The Renaissance Montgomery Hotel and Spa in Alabama

Stone Age Designs Fireplace Mantels Selected for the Suites of The Renaissance Montgomery Hotel & Spa in Montgomery, Alabama. Stone Age Designs is the Commercial Division of Francois & Co. an Atlanta-based Maker of Hand-Carved Limestone Fireplace Mantels and Scagliola Stone™ Fireplace Mantels, Kitchen Hoods and Architectural Accents.

Atlanta, GA (PRWEB) October 26, 2007 -- Several Fireplace Mantels from Stone Age Designs will be installed in the Presidential and Governor's Suites of The Renaissance Montgomery Hotel and Spa scheduled to open in early 2008 in Alabama's capital city. Stone Age Designs is the Commercial Division of Francois & Co. an Atlanta-based maker of Hand-Carved Limestone Fireplace Mantels and Scagliola Stone™ Fireplace Mantels, Kitchen Hoods and Architectural Accents.

The Fireplace Mantel Collections of Stone Age Designs, include the "Manier", and the "Mont-Richard" fireplace mantels that were selected by the Renaissance Montgomery Hotel. "These two fireplace mantel designs will complement beautifully the European-style of the hotel and its classic, luxurious, elegance" explains Jean-Christophe Pandolfi, Director of Sales of François & Co., Parent Company of Stone Age Designs.
Founded in the late 1990's by Thierry François, Stone Age Designs entire collection is now available to discriminating homeowners as well as design professionals through its parent company, François & Co. The Company also has several Showrooms across the country where you can see the work of award winning designer, Thierry Francois.

Superb craftsmanship is the trademark that brings people to the Stone Age Designs Showcase, , and the reason more and more Commercial builders and developers select their designs over a cast stone mantel or kitchen hood, and concrete products.

Inspired by his work over the years with architects and designers, Thierry François has brought his masterful eye and unrivaled expertise to the creation of both the Scagliola Stone™ fireplace mantel and kitchen hood collections. Thierry and his team have drawn from a variety of historical periods and styles, adhering to authentic architectural standards and proportions, to present exquisite lines of Scagliola Stone™ fireplace mantels and kitchen hoods that provide elegant alternatives to designs like those in pre-cast stone.

With a variety of scales and styles, from grand and majestic to delicate and understated; from classical to country French; the Scagliola Stone™ fireplace mantels from Stone Age Designs are sure to fit the bill of any room whether in a grand mansion or a Luxurious Hotel Suite. In little more than a decade, the hand-crafted Scagliola Stone™ products of Stone Age Designs have become market leaders and are well-known among homeowners, as well as the design, architectural and builder communities.

About Stone Age Designs and François & Co.
Founded in 1997, Stone Age Designs and parent company, Francois & Co. are premiere sources for Hand-Carved Limestone fireplace mantels, and fine hand-crafted Scagliola Stone™ kitchen hoods, bathtubs, fireplace designs, and architectural accents. In addition to its 9,000-square-foot showroom and headquarters in Atlanta, François and Co. has showrooms in Winter Park (Florida), Charlotte (North Carolina) and West Hollywood (California). You may contact Stone Age Designs today at 1-866-385-9486 or visit them online at http://www.francoisandco.com/

Kathee Austin
AZhttp, Inc.
480-998-0246

Posted by Industrial-Manufacturing at 06:13 AM | Comments (0)

Lead Astray

People across the UK are experiencing a sharp rise in lead theft from flat roofs and this includes home owners, shop proprietors and even local schools. Reports from the BBC website also show that this problem is becomming a nationwide issue. But help is at hand says flat roofing specialist, Sarnafil Roof Assured.

United Kingdom (PRWEB) October 26, 2007 -- People across the UK are experiencing a sharp rise in lead theft from flat roofs and this includes home owners, shop proprietors and even local schools. Reports from the BBC website (www.bbc.co.uk) show that this problem is becomming a nationwide issue. But help is at hand says flat roofing specialist, Sarnafil Roof Assured.

The value of scrap lead has risen sharply and this has seen an increase in theft, particularly from flat roofs, porches and bay windows. Several Police Forces have already launched local operations to crackdown on this latest spate and have advised homeowners in particular to be wary even when replacing lead on roofs.

In response to this, homeowners have taken the opportunity to replace their flat lead roofs with a similar appearing Sarnafil flat roof solution. Miss Marsh, from Halesowen experienced lead theft and decided to invest in this alternative low maintenance roof solution: "Having experienced the theft several weeks ago we took the decision to invest in an alternative product to ensure that the theft would not happen again. Even the Police suggested that if the lead was replaced it could still be liable for further theft, so we took this course of action and are delighted with the result."

Mark Harris from Sarnafil Roof Assured comments, "Our installers have received a number of enquiries from homeowners and shopkeepers who've experienced lead theft from their roofs. Blooms Menswear of Wolverhampton is another example and fell victim when two roofs were completely stripped of lead in the centre of town. A Sarnafil solution was installed to ensure the same theft did not repeat itself." He adds: "Our installers are advising people to keep an eye out on their roofs to ensure that any theft from the roof doesn't result in any further damage or in leaks within the property."

Posted by Industrial-Manufacturing at 06:13 AM | Comments (0)

ATEX Certified Oxygen Analyzer for PPB, PPM, Trace and Percent level O2 Measurements

Advanced Instruments GPR-18MS/18/28 series oxygen analyzer has been certified for use in ATEX (Ex d IIB+H2 T6, CE) approved hazardous area Class 1, Division 1, Groups B, C, D. Advanced Instruments is a global leader in the development and manufacturing of analytical instrumentation for the process industries.

Pomona, CA (PRWEB) October 26, 2007 -- Advanced Instruments' GPR-18MS/18/28 series Online Oxygen Analyzer combines our proven advanced galvanic electrochemical oxygen sensor with its fast response and long life design with a newly acquired ATEX Certification (Ex d IIB+H2 T6, CE) for hazardous area classification Class 1, Division 1, Groups B, C, D service and is NEMA 3/4/7/9 rated.

The GPR-18MS/18/28 is linear over all full scale (F.S.) ranges of analysis: 0 - 1 parts-per-million (ppm), 0 - 10, 0-100, 0-1000, 0-1%, 0 - 5%, 0 - 10%, 0-25%. The o2 analyzer comes with a 5ppb sensitivity and 1ppb resolution from the LED display. The precision stainless steel sensor housing, wetted parts and enhanced temperature compensation circuitry produce accuracy / repeatability of < 0.5% F.S. with an expected life of 24 - 60 months. A signal output of 4 - 20mA and 0-1VDC is provided.

The compact, disposable oxygen sensor design requires no maintenance and features < 0.5% accuracy under constant conditions along with a fast 7 second response time. The high current output also reduces the temperature dependence at low oxygen levels and produces a very stable signal output that lengthens calibration intervals. This allows the sensor to exhibit superior performance in inert gases, gaseous hydrocarbons, acid and mixed gases.

Not many on-line trace oxygen analyzers provide as much performance for the price as the Advanced Instruments' GPR-18MS/18/28 series ATEX certified Oxygen Analyzers. For additional information, contact Ben Barker at Advanced Instruments Inc., 2855 Metropolitan Place, Pomona, CA 91767, Tel. 909-392-6900, Fax 909-392-3665, web site: www.aii1.com.

Posted by Industrial-Manufacturing at 06:12 AM | Comments (0)

New Hardscape North America Hardscape Project Awards Launched

The Interlocking Concrete Pavement Institute (ICPI) along with the Brick Industry Association and National Concrete Masonry Association are pleased to announce the launch of the new Hardscape North America (HNA) Hardscape Project Awards. The awards recognize outstanding hardscape projects by contractors in residential and commercial/industrial applications. These projects include but are not limited to walkways, patios, driveways, plazas, parking lots, etc.

Washington, DC (PRWEB) October 26, 2007 -- The Interlocking Concrete Pavement Institute (ICPI) along with the Brick Industry Association and National Concrete Masonry Association are pleased to announce the launch of the new Hardscape North America (HNA) Hardscape Project Awards. The awards recognize outstanding hardscape projects by contractors in residential and commercial/industrial applications. These projects include but are not limited to walkways, patios, driveways, plazas, parking lots, etc. "This awards program is a must for HNA, THE Hardscape Show for Contractors. The awards recognize the outstanding workmanship of the contractor. I encourage all hardscape contractors to submit an entry." states HNA program committee chair, William Schneider (Chairman, LPS Pavement Company)

Projects must be completed between January 1, 2007 and December 31, 2007 and submitted to ICPI by Friday, January 11, 2008. A potential of 12 awards will presented at the HNA trade show (February 27-March 1, 2008) at the Downtown Nashville Convention Center. The award winning projects will be prominently displayed throughout the trade show floor and featured in industry trade publications.

The Residential Awards recognize clay brick, concrete paver, segmental retaining walls and a combination of all hardscape products projects. These awards will be given in categories of 1,000 square feet, 1,000 to 5,000 square feet and more than 5,000 square feet. The project size only includes the hardscape portion. Included in the Commercial/Industrial Awards are clay brick, concrete paver, segmental retaining walls and a combination of all hardscape products projects. The Commercial/Industrial Awards will be given in categories of 1,000 to 10,000 square feet, 10,000 to 50,000 square feet and more than 50,000 square feet. The project size only includes the hardscape portion.

The 2008 HNA show will include a larger trade show floor and indoor exhibitor demonstrations and outdoor demonstrations. To support Hardscape North America and the growth of the North American hardscape industry, several sponsorship levels are available for the 2008 show. Sponsors at the Platinum level are Belgard, Hanson Paver Products, Pathfinder Systems, Pavestone Company, PAVE TECH, Pine Hall Brick, Snap Edge Corporation, SRW Products, Surebond, Techni-Seal and Unilock. Gold sponsors include Hess Machinery, Ltd., Oaks Concrete Products, Paver Systems LLC and TEKA North America, Inc. Also, Alliance Designer Products, Inc.; The Belden Brick Company; Big Rock Building Products, an Oldcastle Company; CTI, Inc., Endicott Clay Products Company; KOBRA Molds, LLC; Sebastian Mueller AG and Whitacre-Greer will sponsor at the Silver level.

To learn more about how to enter the inaugural HNA Hardscape Project Awards, visit HardscapeNA.com.

About BIA
The Brick Industry Association (BIA) is the national trade association representing distributors and manufacturers of clay brick and suppliers of related products and services. The Association is involved in a broad range of technical, research, marketing, government relations and communications activities. It is the recognized national authority on brick construction. For more about BIA, visit brickinfo.org.

About Hardscape North America
Hardscape North America (HNA) is THE Hardscape show for contractors. Its focus is to bring top notch education including certification courses, products and technology to contractors and installers who build segmental pavements and retaining walls and also to provide networking opportunities. HNA features indoor and outdoor exhibits displaying state of the art tools and products and trade floor demonstrations and offers the latest technology for contractors. To learn more about HNA, visit HardscapeNA.com.

About ICPI
The Interlocking Concrete Pavement Institute (ICPI) represents producers, suppliers, contractors, design professionals and consultants. ICPI promotes the highest product standards through ICPI product certification and installation guidelines through ICPI concrete paver installer certification. ICPI publishes the Interlocking Concrete Pavement Magazine, along with marketing and technical resources for design professionals, contractors and homeowners. Applications for "pavers" include driveways, patios, plazas, walkways, roofs, airports, streets, ports and stadiums. To learn more about ICPI, visit icpi.org.

About NCMA
The National Concrete Masonry Association (NCMA), established in 1918, is the national trade association representing the concrete masonry industry. The Association is involved in a broad range of technical, research, marketing, government relations and communications activities. To learn more about NCMA, visit ncma.org.

Posted by Industrial-Manufacturing at 06:12 AM | Comments (0)

PCB Solutions Expands Operations, Becoming National Powerhouse for Electronics Circuit Board Assembly

PCB Solutions announces the expansion of it's printed circuit board assembly facility. The new facility provides advanced pcb assembly technology at incredibly affordable customer rates, making PCB Solutions a powerhouse for clients nationwide.

(PRWEB) October 25, 2007 -- PCB Solutions Inc., a recognized leader in printed circuit board assembly, announced today that it has expanded it's production facility by adding new production lines to meet increased demands of quality pcb assembly. They are expecting to increase production volume by more than 250,000 units over the course of the next year. Adding an additional assembly line increases the strength of an already exceptional printed circuit board assembly operation.

Based out of Layton, Utah, PCB Solution's is focused on one-of-a-kind pcb assembly, SMT surface mount placement (smt), box build, through-hole and prototype assembly services and technologies. Although this is an international company, they are very local and customer-service oriented at heart. VP, Steve Niblack, says, "We are proud to have a reputation in this market for quality, dependability and trustworthiness."

PCB Solutions Inc. was founded in 2000 by current President, Dave Woodbury, in Roy, UT. After working in the pcb assembly business for years, Dave realized that the pcb assembly market could use a more personal approach while still maintaining the ability to deliver high volume. At that point Dave began looking for an establishment to host his forthcoming business. Thanks in part to the great success of PCB's customers and exceptional reputation, this company has grown greatly since it's inception. It didn't take long before increases in production demand suggested that PCB move into a larger and more advanced facility. Just 4 years later they relocated from Roy to Layton, UT. With the expansion of operations they now offer a variety of assembly services, including box build assembly.

Steve commented, "The main ingredient that separates us from the competition is our focus on using the latest in technology. As production demands increase, the competition may add 20 new employees. We often take a variation to that approach and add new equipment or a new production line to meet increased demand. This makes sure that we meet the increased requests, but in a more cost effective manner for us in the long run. That allows us to then pass the savings on to our customers."

For those of you that may be curious about what printed circuit boards exactly are, the easiest example would be green microchip-looking boards within everyday electronics. Popular examples are computers, monitors, phones, stereos, video games and other gadgets.

With many years of service under their belt, PCB has an impressive portfolio of loyal customers. "With our recent implementation of an online quote request system we are excited to open up our doors to an even larger customer base. We have already had a surge of through-hole assembly requests in just the past few days." says Steve. "We provide the best quality pcb assembly services that meet or exceed the needs and expectations that our customers deserve. We also recognize the importance of confidentiality with our clients. Confidentiality is mutually beneficial as it maintains our reputation and credibility while protecting our many customers' proprietary interests. It reflects a true professional relationship."

PCB Solutions

www.PCB-Solutions.net

Phone: (801) 773-5509
Fax: (801) 773-7984

3020 N. Fairfield Road
Layton, Utah 84041

Posted by Industrial-Manufacturing at 06:11 AM | Comments (0)

Who Buys a Mountain?

With nearly two weeks until the bid deadline, there is a lot of speculation as to what kind of high-profile buyer will purchase the Capes Lake mountaintop parcel in the TimberWest land auction, and what he or she will do with it. In conjunction with Avison Young and Colliers International, LFC Online is auctioning this 12,000 acre parcel of beautiful timberland along with an additional 2,000 acres in Port Renfrew and Campbell River on Vancouver Island.

Newport Beach, CA (PRWEB) October 25, 2007 -- With nearly two weeks until the bid deadline, prospective buyers are gearing up to bid on a portion of the 14,000 acres of land that TimberWest Forest Corporation is selling on Vancouver Island in British Columbia. In conjunction with Canada-based commercial real estate brokers Avison Young and Colliers International, LFC Online is offering six separate parcels of forest land, most with merchantable timber value, in an accelerated online auction marketing campaign.

"What's so great about our online platform is that potential buyers can bid from all over the world," comments Bill Lange, President of the LFC Group of Companies. "It isn't too late for interested buyers to participate in this auction, even if they cannot physically visit the property, they can perform their due diligence through our website which features thorough and extensive information on the properties, including images, maps, and other detailed documents."

Particularly of interest to many high-profile buyers is the Capes Lake property, a one-of-a-kind 12,000 acre mountaintop parcel offering pristine forest, cascading waterfalls, serene private lakes and unsurpassed views of picturesque Georgia Strait.

Given the Internet's worldwide exposure of the property, combined with the property's intriguing qualities, the question still remains: 'who buys a mountain?'

There has been a lot of speculation as to what kind of buyer will purchase the Capes Lake parcel and what he or she will do with it. From celebrities seeking a private getaway to real estate moguls looking for a legacy property to add to their real estate portfolio, anyone's guess is possible this early in the "auction game." Others imagine an entrepreneur could buy the land for development purposes while, on the flip side, a philanthropist might buy the land, which borders Strathcona Provincial Park, for conservation purposes.

Also offered in this online auction are four distinct parcels, totaling 1,400 acres, of secluded forest land with potential development opportunities in Port Renfrew. In addition, just northwest of Vancouver, there is a functional industrial waterfront lot in Campbell River, perfect for a company looking to relocate or expand and complete with an office building, an 11,000 sq. ft. workshop, a concrete boat launch and a wharf with adjoining dock.

Unfortunately, British Columbia residents may have to wait until the bid deadline of Thursday, November 8 to find out who the winning bidder is and at what price. Interested parties and potential bidders are urged to visit www.LFC.com/686R3 to review more information about the available properties and register to bid in this once-in-a-lifetime online auction event. Until then, as the bid deadline approaches, Vancouver Island citizens will have to continue to wonder, as only time will tell who will own this mountain.

LFC Group of Companies
For over 30 years, the LFC Group of Companies have served numerous Fortune 500 companies, real estate developers, investors, financial institutions and government agencies by auction marketing thousands of commercial, industrial, land and residential properties with an aggregate value well in excess of $5 billion. www.LFC.com

Avison Young Commercial Real Estate Commercial Real Estate Inc.
Avison Young is a real estate brokerage and consultancy firm specializing in corporate tenant representation for office, industrial and retail companies as well as in investment property acquisitions and dispositions and in landlord representation. The company has ten offices across Canada and is part of the Grubb & Ellis Global Alliance of commercial real estate professionals. Avison Young is a partner-owned Canadian commercial real estate company comprised of over 300 real estate professionals including licensed brokers, financial analysts, research professionals and marketing specialists across Canada. www.avisonyoung.com

Colliers International
Colliers International is the largest commercial real estate firm in Canada and one of the largest in the world. Colliers offers a wide range of specialized capabilities including commercial brokerage services, asset services, corporate and financial services as well as market research and information services. Colliers employs over 10,000 professionals occupying 334 offices in 57 countries. Colliers has been built on the strengths and depth of our local market knowledge offered to our clients through a global platform. In Vancouver, Colliers has a full service office consisting of 212 employees and is recognized as the top performing Canadian Colliers office for the last four consecutive years. With our 100 plus years of history in Vancouver, Colliers has a distinct competitive advantage.

TimberWest Forest Corporation (TSX: TWF.UN)
TimberWest Forest Corporation is uniquely positioned as the largest owner of private forest lands in western Canada. The Company owns approximately 334,000 hectares or 825,000 acres of private timberland. These timberlands are located on Vancouver Island and the majority of the land base supports the growth of Douglas fir, a premium tree species sought after for structural purposes. TimberWest runs fully-contracted harvesting operations. With almost 80% of the Company's annual private land logging now being done in second-growth stands, TimberWest leads the Coastal industry in the growing and harvesting of second-growth timber. The Company's independent auditor, KPMG Performance Registrar Inc., periodically certifies that the forest management practices on the Company's private timberland continue to meet all Sustainable Forestry Initiative (SFI®) requirements. SFI requirements specify that forest harvesting is integrated with environmental and conservation goals for soil, wildlife, water quality protection, conservation of biodiversity, protection of special sites and aesthetics in a manner that ensures a sustainable harvest over the long-term. TimberWest also owns renewable Crown harvest rights to 0.7 million m³ of logs per year and operates a sawmill located near Campbell River, BC. In addition, approximately 38,000 hectares or 94,000 acres of the Company's private forest lands have been identified as having greater value as real estate properties and will progressively be made available for higher uses over the next ten to fifteen years. The Company reviews its land base on a periodic basis to update the size of its portfolio of higher use properties. www.timberwest.com

Posted by Industrial-Manufacturing at 06:10 AM | Comments (0)

The Top 2007 Holiday Corporate Gifts are Featured at Promopeddler.com

The Branding Ideas Guru, Dale Kirby, offers up advice on the three most important things to consider when ordering holiday promotional products; 1. Order well before Thanksgiving 2. If giving apparel, don't guess, ask recipients their sizes 3. Gift wrap everything, it will separate you from the pack.

Sherwood, OR (PRWEB) October 25, 2007 -- Promopeddler.com , the largest online catalog of promotional products, announced their 2007 list of the top best picks for corporate gifts. Corporate gifting, the act of saying thank-you to valued employees, showing appreciation to business relationships, and spreading holiday goodwill is more popular then ever.

Corporate gifts are a way to show appreciation for client loyalty and extend the company brand into the marketplace. Making the annual list this year are holiday gifts as low as $4.50 each including a logo imprint. Sending a custom imprinted promotional product by Promopeddler.com is the best way to maintain a presence in your client's memory while also showing gratitude for his or her business.

Corporate gifts are appropriate any time of the year but the winter holidays are the most common time to say thanks. Gifts demonstrate the generous spirit of the season and show a desire to continue a strong business relationship in the coming year. It is also an appropriate time to show an appreciation for a client as a person and not just as a business resource.

Topping the electronic gadgets list this year are in demand retail products such as the emergency cell phone charger and the ipod charger. For a more personal touch, a Turkish robe with slippers beautifully presented with a ribbon attached custom gift card that will generate a warm feeling when handed out.

The Branding Ideas Guru, Dale Kirby, offers up advice on the three most important things to consider when ordering holiday promotional products; 1. Order well before Thanksgiving 2. If giving apparel, don't guess, ask recipients their sizes 3. Gift wrap everything, it will separate you from the pack.

Indications are this could be another record year of over 18 billion in sales for the promotional product industry. In an industry that must insure delivery of custom branded products in time for holiday parties and a creeping earlier and earlier holiday season most companies need to place their orders by November 9th. If you wait to order after Thanksgiving be prepared to pay extra for guaranteed shipping.

About Promopeddler.com
Promopeddler.com, the largest online promotional products catalog, maintains an extensive, low-priced, quality product line, along with fast shipping and a focus on personalized customer service and can be contacted through its website at promopeddler.com or toll free at 1-800-455-1350. Promopeddler.com is a recipient of The Distinguished Designation from the ASI's Multi-Million Dollar Distributor Roundtable and winner of the first Marketing and Branding Web Award in the promotional product industry for 2007.

Posted by Industrial-Manufacturing at 06:09 AM | Comments (0)

HousePlansAndMore.com Adds Exciting New Features to House Plans Web Site

With more than 15,000 home plans to choose from, users may find the task of searching for a new home a bit daunting. But with HDA's new search features, finding that special luxury house plan is a breeze. Consumers are able to search by home plan style, size, and by estimated cost-to-build. HDA lists more than a dozen home plan style categories, and has dozens of styles from custom log home plans to contemporary home plans. The simple navigation allows one to narrow by category and the cost-to-build tool is a unique feature that allows the home plan searcher to ensure they will stay within their set budget.

(PRWEB) October 25, 2007 -- It's no secret that consumers are turning to the Internet for more and more purchases. For a company to stay at the top of their industry, they must employ a stimulating, yet user-friendly Web site, that makes it to the front page of any search engine. HDA, Inc., a St. Louis-based distributing, merchandising and publishing company, has recently added features to their home plan site, www.houseplansandmore.com, to meet this need.

With more than 15,000 home plans to choose from, users may find the task of searching for a new home a bit daunting. But with HDA's new search features, finding that special luxury house plan is a breeze. Consumers are able to search by home plan style, size, and by estimated cost-to-build. HDA lists more than a dozen home plan style categories, and has dozens of styles from custom log home plans to contemporary home plans. The simple navigation allows one to narrow by category and the cost-to-build tool is a unique feature that allows the home plan searcher to ensure they will stay within their set budget.

In addition, a brand new Photo Gallery has been added to give consumers a true feel for the home they are interested in purchasing. Visitors to the site can click on the Photo Gallery to view all plans with photos available, or when viewing a single plan, click on the camera icon to view available photos. It is a fun and simple way to take the customer on a virtual tour through the home.

"In today's world everyone turns to the Internet for information, and now anyone with a desire to build can turn to www.houseplansandmore.com, the one-stop shop on the electronic highway for all the building information they need," said Larry Rigg, Senior Designer at HDA. "Our Web site offers variable search options to make it easy to choose from thousands of home plans and projects complete with material outlines, building estimates, customizing, photo galleries, a builder locater service, legal help, and more."

In the site's Resource Center users will find an abundance of articles to assist them through the home building journey. Articles cover every topic - from how to select the best contractor to how to decorate the house when it's complete. A blog site is also offered, featuring a new topic each week for users to read and share their comments.

With all of these additions, country house plan perfect for you."

To see the upgraded Web site, and to find more information about HDA, Inc., please visit www.houseplansandmore.com or call 314-770-2222.

HDA, Inc., headquartered in St. Louis, Missouri, is the one of the country's largest distributors and category managers of books and magazines to retail outlets. HDA currently distributes more than 350,000 books, magazines and CD's weekly and has the warehouse and distribution capacity to expand output to more than 1,000,000 units weekly. The company also publishes its own books, magazines, home plans, project plans, wall murals and kits for creating Yard Art. HDA was founded in 1983 by Robert Ketterer and George Bearer. The company is located at HDA, Inc. 944 Anglum Road, St. Louis, Missouri, 63042-2329. The phone number is 314-770-2222 and the corporate website is www.hdainc.com.

Posted by Industrial-Manufacturing at 06:08 AM | Comments (0)

Top North American Luxury Real Agents Recognized in Upscale Marketing Competition - Upper-tier Agents Acclaimed as Leaders in Luxury

Luxury real estate professionals working in upscale markets gathered to see how their marketing techniques compare to the best in the business at a networking symposium for upper-tier Realtors at La Posada Resort in Santa Fe (NM). Hosted by The Institute for Luxury Home Marketing, Leaders in Luxury (LIL) is an exclusive, invitation-only educational and networking opportunity for luxury real estate agents who work in the million dollar plus housing market.

Dallas, TX (PRWEB) October 25, 2007 -- Luxury real estate professionals working in upscale markets such as New York or Las Vegas recently gathered to see how their marketing techniques compare to the best in the business at a networking symposium for upper-tier Realtors at La Posada Resort in Santa Fe (NM). Hosted by The Institute for Luxury Home Marketing, Leaders in Luxury (LIL) is an exclusive, invitation-only educational and networking opportunity for luxury real estate agents who work in the million dollar plus housing market.

The Institute for Luxury Home Marketing announced this year's Leaders in Luxury award winners, who were chosen by a panel of advertising executives for their quality and performance in upscale marketing:

Michael Morrison of John L. Scott Real Estate, Tacoma (WA), won Overall Excellence in Marketing.

Mike Brodie of Keller Williams, Dallas (TX), won Best Integrated Marketing Campaign for a Single Property.

Ingrid Glancy of Denver Fine Properties, Denver (CO), won Most Effective Use of Institute Membership in Agent Marketing.

Maribeth Peters of Ellen Terry Realtors in Dallas (TX), won for Personal Achievement.

Bruce Hiatt of Luxury Realty Group, Inc., Las Vegas, (NV), took home two awards: Highest Dollar Volume of Closed Transactions Priced at $1 Million and Above, and Most Closed Transactions of Properties Selling for $1 Million or More. The two awards were recognition for individual achievement and did not include overall Luxury Realty Group property sales.

"With such major and internationally known luxury real estate agents across North America attending the Leaders in Luxury conference, this award clearly gives me both personal recognition and a testament to the accomplishments of Luxury Realty Group in the luxury real estate business," says Bruce Hiatt, Broker and co-owner of Luxury Realty Group, Inc.

"With so much negative press about the Las Vegas real estate market these days, this award confirms that the luxury real estate market in Las Vegas continues to thrive very well. This is especially true on an international basis as Las Vegas is increasingly the number two choice behind New York for international buyers of luxury high rise condos," Hiatt said. "The supply of luxury condos along the Las Vegas Strip is very limited. Currently, there is only one luxury residential high rise tower with a Strip address. The Las Vegas luxury high rise condo market is a tiny fraction of the huge inventory of luxury condos that exist in Miami. With the price of Strip land rising from $4 million to $34 million an acre over the past three years, buyers sitting on the sidelines will most likely not see these price points again in Las Vegas," observed Bruce Hiatt.

Leaders in Luxury connects real estate agents who focus on the luxury arena, giving them a venue in which they can share constructive ideas, learn from each other's experiences, and gain new insights into the luxury market from industry experts. For information on Leaders in Luxury, visit www.LeadersInLuxury.com.

About The Institute of Luxury Home Marketing
The Institute has 5000 members on four continents. Members who have completed special training and met performance standards may earn the prestigious Certified Luxury Home Marketing Specialist designation. Associates who demonstrate competence in the million dollar and above property arena are recognized with membership in The Institute's Million Dollar Guild.

About Luxury Realty Group
Luxury Realty Group is a boutique, highly specialized luxury real estate brokerage in Las Vegas, Nevada. The brokerage specializes in both luxury homes and luxury high rise condominiums from new construction to existing properties. Luxury Realty Group is recognized on a national level by many major publications and television media for its expertise in the Las Vegas luxury real estate market. Additional information about Luxury Realty Group can be found at www.LuxuryRealtyGroup.com or phone 702-456-7080 PST.

Posted by Industrial-Manufacturing at 06:08 AM | Comments (0)

Legalview Provides up to Date Mesothelioma Information as Recent Flooding Exposes Asbestos Danger

Asbestos discovered after flooding of Redlands City Hall; LegalView offers wealth of asbestos and Mesothelioma guidance.

Denver, CO (PRWEB) October 25, 2007 -- When City Hall in Redlands City, California was flooded last week with gray water backed up from the city's sewage system, the initial concern was e coli bacteria. Another danger, however, was quickly identified by city workers; hazardous levels of asbestos. An asbestos remediation company has been brought in and workers have been relocated as cleanup efforts are delayed due to this dangerous discovery.

Asbestos was widely used in building insulation in the first half of the 20th century. We now know that exposure to asbestos can lead to mesothelioma, a crippling type of lung cancer that attacks the lining of the lung. Unlike most lung cancers, mesothelioma is not caused by smoking, according to the National Cancer Institute; the Institute reports that 80 percent of mesothelioma patients had known asbestos exposure earlier in life. Mesothelioma can kill quickly; on average, doctors give patients six months to a year to live after their diagnosis. With this in mind, LegalView.com continues to provide factual information, news and links to more information for mesothelioma patients and their families through its mesothelioma information internet portal.

LegalView.com strives to bring its readers complete, up-to-date information on legal issues that affect ordinary Americans. In addition to the mesothelioma resources, LegalView.com offers comprehensive sites with information concerning brain injury litigation, auto accident lawsuits, or construction accident attorneys. These are in addition to general resources LegalView.com maintains on possible unsafe drugs, medical malpractice cases, and defective consumer products and foods. All of these sites, and others at LegalView.com, combine easy-to-understand information facts with the latest news, government information, jury verdicts and settlements, as well as links to more information specific to each legal issue. And for those who are ready to seek out a mesothelioma attorney or other type of experienced lawyer can find one in their areas using LegalView.com's free attorney search service.

LegalView.com is a free public service brought to you by Legal WebTV Network, LLC, a Limited Liability Corporation created by a group of the nation's most highly respected law firms: Anapol Schwartz; Brent Coon and Associates; Burg Simpson; Cohen, Placitella and Roth; James F. Humphreys and Associates; Lopez Hodes; and Thornton and Naumes. For more information on the accomplishments and track records of LegalView.com's respected sponsoring law firms and to get in touch with LegalView.com attorneys, visit LegalView.com at http://www.legalview.com/

Posted by Industrial-Manufacturing at 06:07 AM | Comments (0)

Perini Receives New Work in Iraq worth $68.5 Million

FRAMINGHAM, Mass. (Business Wire EON) October 25, 2007 -- Perini Corporation (NYSE: PCR), a leading building and civil construction company, announced the award of four new task orders from the U.S. Army Corps of Engineers for work in Iraq. Together, these four new Task Orders total $68.5 million. The Task Orders were competitively bid under an existing contract to provide design-build and construction related services within the Central Command (CENTCOM) Area of Operations.

Two of the projects, valued at $12 million and $19.8 million respectively, are for additional Overhead Coverage Systems at Coalition Forces and U.S. Government facilities in Iraq. A Perini led Team has designed and constructed more than 70 similar structures at seventeen different locations in Iraq since September 2005. These new awards bring Perini’s Overhead Coverage Systems program to a total of more than $320 million.

The Overhead Coverage System consists of pre-engineered structures with double layer roofs, which are designed to protect personnel from incoming mortars and rockets. The Perini Team for this program includes Tetra Tech, Inc. of Pasadena, CA as the lead design firm, Butler Manufacturing Company of Kansas City, Missouri and Stanley Consultants of Muscatine, Iowa.

Perini recently received recognition from General David H. Petraeus, Commander of the Multi-National Force – Iraq, and Brigadier General Michael J. Walsh, Commander of the U.S. Army Corps of Engineers Gulf Region Division, for its role in providing protection for U.S. personnel with quality and timely construction services under this program.

In addition to the Overhead Coverage awards, Perini received two separate awards for upgrading infrastructure at Coalition Forces bases in northern Iraq. These awards are for the design and construction of water and fuel storage tanks valued at $ 20 million and $16.7 million, respectively. For these projects, Perini leads a team of specialized engineering firms; Tetra Tech, Inc. will design the water systems and Argus Consulting of Blue Springs, MO will design the fuel systems.

Perini has had extensive experience in the CENTCOM Area of Operations. It has successfully executed over $1 billion worth of fast-track design-build task orders, including projects at 15 Coalition bases in Iraq and at four Afghan National Army Brigade complexes in Afghanistan. Perini is pleased to continue supporting the U.S. government with its vital missions through the provision of quality construction services.

About Perini Corporation

Perini Corporation is a leading construction services company offering diversified general contracting, construction management and design-build services to private clients and public agencies throughout the world. We have provided construction services since 1894 and have established a strong reputation within our markets by executing large complex projects on time and within budget while adhering to strict quality control measures.

We offer general contracting, pre-construction planning and comprehensive project management services, including the planning and scheduling of the manpower, equipment, materials and subcontractors required for a project. We also offer self-performed construction services including sitework, concrete forming and placement and steel erection. We are known for our hospitality and gaming industry projects, sports and entertainment, educational, transportation, healthcare, biotech, pharmaceutical and high-tech facilities, as well as large and complex civil construction projects and construction management services to U.S. military and government agencies.

The statements contained in this Release that are not purely historical are forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934, including without limitation, statements regarding the Company’s expectations, hopes, beliefs, intentions or strategies regarding the future. These forward-looking statements are based on the Company’s current expectations and beliefs concerning future developments and their potential effects on the Company. There can be no assurance that future developments affecting the Company will be those anticipated by the Company. These forward-looking statements involve a number of risks, uncertainties (some of which are beyond the control of the Company) or other assumptions that may cause actual results or performance to be materially different from those expressed or implied by such forward-looking statements. These risks and uncertainties include, but are not limited to, the Company's ability to successfully and timely complete construction projects; the difficulties associated with performing work in Iraq, the Company’s ability to convert backlog into revenue; the potential delay, suspension, termination, or reduction in scope of a construction project; the continuing validity of the underlying assumptions and estimates of total forecasted project revenues, costs and profits and project schedules; the outcomes of pending or future litigation, arbitration or other dispute resolution proceedings; the availability of borrowed funds on terms acceptable to the Company; the ability to retain certain members of management; the ability to obtain surety bonds to secure its performance under certain construction contracts; possible labor disputes or work stoppages within the construction industry; changes in federal and state appropriations for infrastructure projects; possible changes or developments in worldwide or domestic political, social, economic, business, industry, market and regulatory conditions or circumstances; and actions taken or not taken by third parties, including the Company’s customers, suppliers, business partners, and competitors and legislative, regulatory, judicial and other governmental authorities and officials. The Company undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as may be required under applicable securities laws.

Posted by Industrial-Manufacturing at 06:06 AM | Comments (0)

BridgeStreet Worldwide Hosts Global Corporate Housing Alliance at Annual Conference

Corporate housing industry leaders collaborate on globalization & technology.

(Vocus/PRWEB ) October 25, 2007 -- BridgeStreet Worldwide, a leading international provider of corporate housing to business travelers and relocation firms, hosted its Annual Leadership Conference at the Sheraton Myrtle Beach Convention Center Hotel from September 28 – October 1. The leadership team of BridgeStreet Worldwide along with representatives from BridgeStreet offices across the world, Global Alliance Partners and corporate housing industry Supplier Partners attended the conference.

The annual event combines a unique blend of world-renowned speakers and educational seminars, along with teambuilding and networking opportunities. Throughout the four-day conference the focus was on the globalization of the industry, the expansion of the BridgeStreet Global Alliance to meet new locations for business travelers and the release of EasySourcesm, BridgeStreet’s web-based supplier management tool.

“The rise of globalization is hitting the corporate housing industry at light speed. This year’s conference offered an opportunity to strengthen relationships between BridgeStreet and our Global Alliance Partners,” said Lee Curtis, president and CEO of BridgeStreet Worldwide. “We have set an aggressive agenda for continued global expansion which requires a commitment throughout the alliance. The annual conference really provides an open forum for leaders in the corporate housing industry to come together and collaborate on the direction of this hospitality segment.”

BridgeStreet’s expansion is in response to a growing number of its multi-national clients with executives traveling overseas who were seeking longer-term accommodations of comparable quality to BridgeStreet’s U.S. and UK accommodations. Through the BridgeStreet Global Alliance, all partners work in concert to deliver the very highest quality service with total consistency in presentation and communications. Further the Alliance itself contributes directly to the growth of the corporate housing/serviced apartments industry across the world.

“Our clients are seeking a global solution for all of their temporary housing needs. They seek quality and value along with flexible solutions, consolidated reporting and performance metrics,” said Curtis. “Through the BridgeStreet Global Alliance we developed a strong network of providers to service client needs. With the release of EasySourceSM, we now have access to and metric the most complete group of corporate housing / serviced apartment suppliers across the globe. BridgeStreet Worldwide is the only corporate housing provider employing a fully integrated procurement management tool of this nature.” said Curtis.

The EasySource application uses the latest web technology to automate the supplier sourcing process and generate accountability metrics. “It was essential that we solve the corporate housing procurement problem for our clients while developing a shared platform for our Global Alliance Partners. EasySource has made life easier for clients while adding cohesiveness to the alliance program,” comments Jon Wohlfert, CTO of BridgeStreet Worldwide. “We are pleased to see how the EasySourcesm technology has led to the development of new partner relationships with both our clients and our Global Alliance members.”

BridgeStreet Worldwide is a leading international provider of corporate housing. BridgeStreet and its Global Alliance Partners offer over 15,000 corporate apartments located throughout the United States and 50 cities internationally. An award winner both in the U.S. and Europe, BridgeStreet properties meet uncompromising standards of quality, comfort and service. For more information about the company or to learn more about how BridgeStreet is Making Corporate Housing Easy, visit www.bridgestreet.com or call 1-800-BSTREET.

Posted by Industrial-Manufacturing at 06:06 AM | Comments (0)

Pringle Development, Inc. Wins National Housing Award from NAHQ

EUSTIS, Fla. (Business Wire EON) October 25, 2007 -- Pringle Development, Inc. is proud to announce they are one of five winners of the 2008 National Housing Quality (NHQ) Awards. This is the third time Pringle Development has received an NHQ award, and the second time earning silver. These awards are determined and presented by the NAHB Research Center and Reed Business Information and represent the home building industry's highest recognition for quality achievement and operational excellence. Pringle Development and the rest of this year's winners mark the 15th anniversary of the NHQ awards, which are determined through an intensive evaluation of the quality of all aspects of their business.

According to Professional Builder magazine's editorial director Paul Deffenbaugh, “The National Housing Quality Award is the hardest award to win in home building. It requires dedication and purpose throughout a home building company, and only the best can achieve this distinction.” Pringle is pleased to publicize this achievement that distinguishes them as the best of the best in the home building industry and recognizes their attention to maintain the highest standards of excellence.

Pringle Development, Inc. (www.Pringle.com) was founded in 1981 by George and John Pringle but the family has been in the developing and building business in Lake County for over 80 years. In 2004, Pringle Development sold the company to their employees becoming the first Employee Stock Ownership Program (ESOP) developer in Lake County. Through the years, they have won numerous awards in Lake County's Parade of Homes competition and their communities are known to sell out very quickly which is just one of many reasons they are the industry leader in Central Florida.

Posted by Industrial-Manufacturing at 06:05 AM | Comments (0)

Poll Shows America Does Not Support Federal Intervention in Sub-Prime Market

Public Opinion Strategies poll show 62 percent believe ‘individuals should take responsibility.’

WASHINGTON (Business Wire EON) October 25, 2007 -- National headlines are dominated with stories about the housing market slowdown and credit crunch. Believing that market problems need government solutions, Congress is debating federal intervention into the mortgage market.

The housing market is adjusting to an oversupply of housing stock and the failure of many high risk borrowers to meet their mortgage agreements. After years of steady growth in housing prices and a historic expansion of homeownership, a market correction is to be expected. Rather than aiding the situation, government intervention would distort the natural correction and prolong the uncertainty and turmoil in the housing market.

Americans understand this and believe that individual homeowners and lenders will need to adjust to market realties, and a federal bailout of the sub-prime market or new regulations are not wanted according to a newly released Public Opinion Strategies poll. Between October 18 and 21, 1,000 likely voters were questioned over their opinions on the mortgage crisis.

With a margin of error of 3.1 percent., 90 percent of those surveyed viewed sub-prime mortgages as a serious crisis, but only 31 percent of respondents believed the federal government should get involved.

“This poll provides a clear signal to lawmakers that the public is leery of expansive new regulations or a massive government bailout of lenders,” said Wayne Brough, Chief Economist at FreedomWorks.

Rather than create new federal mandates and regulations, 93 percent of respondents support disclosure to provide consumers more financial information before signing mortgages. Eighty-seven percent favored verifying finances and incomes to ensure buyers can pay back their loans and by more than a two-to-one margin, people opposed legislation that would eliminate the need for a down payment on federally funded loans.

Brough continued:

“People understand the risks inherent in the housing market. New regulations to prop up those who misjudged the market encourage individuals to undertake riskier transactions, knowing that ultimately the government will bear the risk. Moreover, new regulations can actually reduce access to credit, making it more difficult for consumers to realize their goals of homeownership. The American people view the market, not the government, as the proper arena for correcting current trends. Congress would be wise to follow the same path.”

Full poll results are available at www.freedomworks.org.

Posted by Industrial-Manufacturing at 06:04 AM | Comments (0)

Leopardo Construction Completes Multi-Tenant Build-To-Suit Office/Warehouse in Elgin, Illinois

Leopardo Construction, a leading construction services firm, today announced it completed the Fox Bluff Corporate Center, a 37,000-square-foot multi-tenant, build-to-suit office/warehouse facility in Elgin.

Elgin, IL (PRWEB) October 24, 2007 -- Leopardo Construction, a leading construction services firm, today announced it completed the Fox Bluff Corporate Center, a 37,000-square-foot multi-tenant, build-to-suit office/warehouse facility in Elgin.

The pre-cast building, located at 1355 Bowes Road, has capacity for 12,000 square feet of high-end office space, and features three dock doors and three drive-in doors. The warehouse has a 24-foot clear height.

Leopardo provided turnkey development services for this build-to-suit project.

About Leopardo Construction

Leopardo Construction is a leading construction firm providing pre-construction, general contracting, construction management, design-build and development services. In 2007, Leopardo Construction was recognized by Engineering News-Record magazine as one of the nation's largest 220 contractors. The company's team of 500 experts has specialized capabilities in interiors, healthcare, senior housing, retail, office, industrial, residential condominiums, aviation, hospitality and community-related projects such as libraries, churches and educational institutions.

For more than a quarter century, Leopardo's family of employees has been committed to quality construction, superior client service and tremendous value. In addition to its corporate headquarters in Hoffman Estates, Illinois, Leopardo Construction has offices in Chicago and Mount Pleasant, South Carolina, as well as job sites across the nation. For more information, please visit http://www.leopardo.com

Posted by Industrial-Manufacturing at 06:04 AM | Comments (0)

Leopardo Construction Completes 103,000-SF Interior Build-Out for Chicago Advertising Agency

Leopardo Construction, a leading construction services firm, recently completed a 103,000-square-foot interior build-out for the Chicago headquarters of Abelson Taylor, a medical and pharmaceutical advertising agency.

Chicago, IL (PRWEB) October 24, 2007 -- Leopardo Construction, a leading construction services firm, recently completed a 103,000-square-foot interior build-out for the Chicago headquarters of Abelson Taylor, a medical and pharmaceutical advertising agency.

Needing to expand its operations, add collaborative spaces and create a modern working portfolio to feature its award-winning work, Abelson Taylor assembled an expert project team that included Harley Ellis Devereaux as designer, Leopardo Construction as general contractor and Staubach Midwest as the owner’s representative.

The new interior provides Abelson Taylor with many open office areas to create a space that feels much larger. Constructed during a 16-week schedule, the headquarters realized a significant increase in conference rooms without a dramatic addition of conferencing space. The office also features several small collaborative areas, more natural light and outside views into the workspace. A custom pantry was built in the shape of a 9-foot-tall egg – made of wood, plaster and fresco finishes – to pay homage to one of the agencies first campaigns.

About Leopardo Construction
Leopardo Construction is a leading construction firm providing pre-construction, general contracting, construction management, design-build and development services. In 2007, Leopardo Construction was recognized by Engineering News-Record magazine as one of the nation’s largest 220 contractors. The company’s team of 500 experts has specialized capabilities in interiors, healthcare, senior housing, retail, office, industrial, residential condominiums, aviation, hospitality and community-related projects such as libraries, churches and educational institutions.

For more than a quarter century, Leopardo’s family of employees has been committed to quality construction, superior client service and tremendous value. In addition to its corporate headquarters in Hoffman Estates, Illinois, Leopardo Construction has offices in Chicago and Mount Pleasant, South Carolina, as well as job sites across the nation. For more information, please visit www.leopardo.com.

Posted by Industrial-Manufacturing at 06:03 AM | Comments (0)

G&A Partners Releases 2007 Texas HR Outsourcing Report

G&A Partners, a fully integrated Houston-based human resource (HR) and administrative services company, today announced the release of its latest market research report, the "2007 Texas HR Outsourcing Report." This white paper explores the benefits associated with HR outsourcing and provides insight into current outsourcing trends in Texas businesses.

Houston, TX (PRWEB) October 24, 2007 -- G&A Partners, a fully integrated Houston-based human resource (HR) and administrative services company, today announced the release of its latest market research report, the "2007 Texas HR Outsourcing Report." This white paper explores the benefits associated with HR outsourcing and provides insight into current outsourcing trends in Texas businesses.

"We believe this report provides an accurate view of current HR outsourcing practices and illustrates the benefits that companies can realize when they outsource," said John W. Allen, president and COO of G&A Partners. "In addition to highlighting what can be achieved through successful outsourcing arrangements, the report also explores why some companies elect not to outsource."

According to the report, there is an increasing need for HR outsourcing in growing businesses, and the "2007 Texas HR Outsourcing Report" provides information about the benefits associated with outsourcing. Current HR activities, satisfaction and concerns also are examined. The report delineates the findings of G&A Partners' "Texas Outsourcing Survey," which studied approximately 200 business owners and professionals during the second quarter of 2007.

Key findings of the "2007 Texas HR Outsourcing Report" include:

There is a need for HR outsourcing in growing businesses.
Growing companies know that they need an HR solution, but perhaps think there is a diminished benefit for smaller companies to outsource their HR functions.
Growing companies are looking for a less expensive and more efficient way to provide HR functions.
These growing businesses lack the motivation to adopt an HR outsourcing solution despite knowing that they could benefit from doing so.

The report is available at http://gw.vtrenz.net/?WSW4NGMMJC For more about G&A Partners, visit their website at www.gnapartners.com.

About G&A Partners
G&A Partners is a Houston-based HR and administrative services company that manages human resources, benefits, payroll, accounting and risk management for growing businesses. G&A maintains offices in Houston, Dallas, San Antonio, Austin, College Station and Corpus Christi. For more information about the company, visit www.gnapartners.com.

Posted by Industrial-Manufacturing at 06:02 AM | Comments (0)

Tarp Company Expands Business by Participating in Disaster Relief Efforts

Since 2005, A1 Tarps has been a proud supplier and, manufacturer of commercial and residential tarps for disaster relief efforts around the world creating an expansion and demand for more business.

Los Angeles, CA (PRWEB) October 24, 2007 -- During the aftermath of Hurricane Katrina blue tarps were vividly displayed across the landscapes of damaged homes in Louisiana revealing extensive destruction. Many people experienced that hurricanes can strike anytime with little or even no warning for preparation leaving several homeowners with damaged roofs and little time to repair the problem. More than 250,000 blue tarps used throughout the hurricane-impacted region of New Orleans were supplied by A1Tarps creating wide company recognition and expansion.

A1 Tarps plays an integral role in disaster preparedness by providing large amounts of tarps worldwide due to the many accessible quantities on hand. The company has supplied many polyethylene coverings to organizations in response to natural disasters such as Hurricane Charley, Frances, Ivan, Jeanne and Tropical Storm Bonnie.

In 2005, A1 Tarps immediately shipped over fifty containers of weather resistant tarps to the blue roof project managed by the U.S. Army Corps of Engineers (USACE) for the Federal Emergency Management Agency FEMA The tarps were used as temporary roof covers and shelters in response to Hurricane Katrina as homeowners waited to be re-roofed.

In addition to providing natural disaster support, A1 Tarps has increased business by expanding company products and offering superior commercial and residential quality tarps at competitive prices. The company supplies and manufactures a wide variety of tarps and canopies ranging in a multitude of colors and sizes, covering everything from dump trucks and lumber to portable buildings, RV's and much more.

With more consumers A1 Tarps is the largest tarp manufacturer and supplier in the US and will continue to use its services to assist many organizations in additional natural disaster relief efforts.

Company Information:

A1 Tarps is the sister company of PTM Inc. products and is a family owned and operated business with over 25 years experience in the manufacturing of tarps, tents, portable garages and canopies. A1 Tarps offers a wide variety of durable rust resistant construction tarps, the world's largest selection of heavy-duty poly tarps and two color types of fire retardant tarps certified under the California State Fire Marshal with the Fire Marshal tag permanently attached to the side. Every tarp available offers rust resistant grommets, rope-enforced corners is water and mildew proof.

A1Tarps takes pride in its excellent service and immediate shipping capabilities. For more information on products and purchases visit www.a1tarps.com

Posted by Industrial-Manufacturing at 06:02 AM | Comments (0)

EquipNet Opens India Office

EquipNet expands presence in Asia.

Canton, MA (PRWEB) October 24, 2007 -- EquipNet, Inc., the leading provider of proactive asset management solutions, today announced the opening of its India office, EquipNet India Pvt. Ltd. The announcement marks an expanded Asian presence following the opening of the company's Singapore office in June. The Indian-owned subsidiary is the latest addition to the list of global locations for EquipNet, which has seen a rapid increase in demand for its services.

By providing sales and services from employees that understand the various local marketplaces, the India office will be able to provide EquipNet's global industry expertise to the sub-continent. The new office will allow EquipNet to more directly serve the sub-continent, a market that is projected to grow exponentially over the next few years.

"EquipNet is uniquely positioned to help Indian companies manage their surplus assets on both a global and local level," said Roger Gallo, president and CEO of EquipNet, Inc. "We are excited about the opportunity to directly serve the region and to be considered a truly local partner."

EquipNet India Pvt. Ltd., A 701, Dyanmudra, Link Road, Mumbai - 400 068, India. The office can be reached at +91 22 28480883.

About EquipNet, Inc.:
EquipNet is a leading provider of proactive asset management solutions and services to leading corporations such as Colgate-Palmolive, Eastman Chemical, GlaxoSmithKline, Iron Mountain, and Blue Cross Blue Shield of Massachusetts. Its vision is to revolutionize the way companies manage their surplus assets. EquipNet has earned a reputation for helping clients maximize their financial return; avoid the risks associated with health, safety and environmental hazards, and theft, and to be in compliance with Sarbanes-Oxley. For more information, please visit www.EquipNet.com.

Posted by Industrial-Manufacturing at 05:59 AM | Comments (0)

NevaSlip Anti-Slip Floor Service Expands Coverage Nationwide

NevaSlip™ anti-slip floor service, which helps architects, builders, and owners of large commercial properties prevent the injuries and liability of slip-and-all accidents, has expanded its service nationwide. Now NevaSlip can help architects and companies in all 50 states protect themselves while containing their insurance and healthcare costs.

Lynn, MA (PRWEB) October 24, 2007 -- NevaSlip™ anti-slip floor service, which helps architects, builders, and owners of large commercial properties prevent the dangers and liability involved in slip-and-all accidents, has expanded its service nationwide. With the recent additions of trained technicians in Oregon, Washington, Alabama, and Georgia, NevaSlip is now available to make floors slip-resistant and safe in all 50 states.

A slip-and-fall accident can cause serious injuries, and can also hurt a company's productivity. An industry leader for over 18 years, NevaSlip™ applies the most advanced anti-slip formula available on tile, marble, granite, terrazzo, and concrete floors -- indoors or out -- to give them a Static Coefficient of Friction (SCOF) reading that meets or exceeds requirements of the Americans with Disabilities Act (ADA) for at least 8 years.

"It's no secret that falls are the number one reason people are admitted to hospitals today," said Owner and President Stan Handman. "Around 25,000 falls occur every day. But our NevaSlip™ service makes it easier than ever for a company anywhere in the country to protect employees and customers from falls while also protecting its bottom line."

Since health care costs and personal injury actions both continue to rise, several corporations now look at NevaSlip™ installation as a significant cost-savings strategy. And many insurance companies even require their corporate clients to install anti-slip surfaces to ensure coverage. NevaSlip technicians can install anti-slip surfaces while most businesses are closed, and with this nationwide expansion, one call to NevaSlip -- or visit to www.nevaslip.com -- makes that easier than ever.

Posted by Industrial-Manufacturing at 05:59 AM | Comments (0)

AirAdvice State of Building Performance Report 2007 Shows Majority of Commercial Buildings Fail to Meet Fundamental Standards

Data in the newly released AirAdvice State of Building Performance Report 2007 shows that more than 9 out of 10 commercial buildings fail to meet fundamental standards for acceptable comfort and energy efficiency. This and other key findings in the report suggest significant opportunities to reduce energy and operating costs as well as to improve building system performance and occupant satisfaction.

Portland, OR (PRWEB) October 24, 2007 -- Data in the newly released AirAdvice State of Building Performance Report 2007 shows that more than 9 out of 10 commercial buildings fail to meet fundamental standards for acceptable comfort and energy efficiency. This and other key findings in the report suggest significant opportunities to reduce energy and operating costs as well as to improve building system performance and occupant satisfaction.

Commercial building assessments performed across North America show that:

Most buildings suffer from two or more basic comfort or energy efficiency flaws
Conditions that are likely to generate comfort complaints exist in over 75% of buildings surveyed
Over-ventilation is the most common cause of excessive HVAC-related energy use

The AirAdvice State of Building Performance Report 2007 defines the current state of HVAC system performance in North America. It combines the latest industry findings with the AirAdvice Indoor Environment and Building Performance Database (IEBPD), a collection of data from over 300 customized commercial building assessments conducted since June 2006 and over 3,700 individual indoor environment analyses conducted in cooperation with over 1500 HVAC professionals since March 2004.

Overall, 96% of buildings analyzed failed to meet industry guidelines in at least one of five fundamental elements of building comfort and energy efficiency: temperatures that are too warm, too cool, fluctuate excessively, fail to match the setpoint, and evidence of over-ventilation.

"In addition to quantifying the prevalence and nature of commercial building performance issues, the AirAdvice State of Building Performance Report 2007 summarizes the significant economic costs of these issues," says Gary Frayn, AirAdvice vice president of commercial development. "This report delivers critical information and insight to building owners, operations and facilities managers, as well as HVAC industry professionals, such that performance issues in commercial buildings can be effectively addressed and resolved, creating both new business opportunities within the industry as well as improved performance outcomes."

The report provides building performance professionals with information to address today's most common building performance issues: comfort complaints and occupant/employee satisfaction, high energy costs, and sustainability issues. For example, the report findings show that:

Over 80% of buildings surveyed showed evidence of over-ventilation. Improving ventilation control offers a significant potential for energy savings, up to 40% in many cases.
Less than half of buildings surveyed maintained temperatures within 2 degrees Fahrenheit of the specified set point. One in five buildings surveyed experienced actual temperatures that were more than 5 degrees F from the specified set point. There is a direct relationship to temperature variation and comfort complaints. Based on ASHRAE comfort models the predicted rate of dissatisfaction is as high as 30% when the temperature swings are greater than 5 degrees F, resulting in productivity loss.
Nearly one-quarter of buildings surveyed were found to have inefficient temperature control, with the temperature in the space significantly higher than the heating setpoint or lower than the cooling setpoint. The potential exists for energy savings of up to 10% if more precise temperature control at the specified set point could be achieved.

The report also summarizes data and insight from several industry studies, providing important information about building owners' perspectives on energy savings, comfort and energy performance of LEED®-certified projects, and quantitative data detailing the positive impact on productivity from improved thermal comfort.

Download the Report
The full AirAdvice State of Building Performance Report 2007 is available for download at www.airadvice.com/commercial/report-form.php. Or, visit www.airadvice.com for additional commercial building performance resources and information.

About AirAdvice, Inc.
AirAdvice, Inc., headquartered in Portland, Oregon, was founded in 1999 to help people improve their quality of life by taking charge of their indoor environment.

AirAdvice develops innovative technologies to monitor and analyze building performance and indoor environment factors that impact occupant comfort, health, and safety as well as system and building efficiency. The HomeAdvice™ and BuildingAdvice™ systems enable contractors, facility managers, and building owners to identify opportunities to reduce energy costs, improve the operational efficiency of heating, ventilation, and air conditioning (HVAC) systems, and solve indoor environmental quality issues.

More than 1,500 contractors and 30 distribution companies across North America use the HomeAdvice™ and BuildingAdvice™ systems. For more information, contact AirAdvice at www.airadvice.com.

Posted by Industrial-Manufacturing at 05:58 AM | Comments (0)

Environmental Service Professionals, Inc. Division President Named President of IESO

Indoor Environmental Standards Organization Promotes Public Health and Safety

PALM SPRINGS, Calif. (Business Wire EON) October 24, 2007 -- Environmental Service Professionals, Inc. (OTCBB:EVSP) today announced that Francis X. (“Rich”) Finigan, President of the Company’s Allstate/Advance Look Building Inspections & Environmental Testing division (AHI), has been elected President of the Indoor Environmental Standards Organization (IESO).

IESO is a non-profit organization that provides a national forum for the development and publication of voluntary consensus standards for the assessment of indoor environments. IESO is an accredited standards developer of the prestigious American National Standards Institute (ANSI).

Mr. Finigan remarked: “IESO’s mission is the promulgation of standards that promote public health, safety and the overall quality of life. I’m proud to offer my knowledge and time to this influential organization, particularly now, when environmental issues in the home and workplace are of critical concern.”

“Rich Finigan has been recognized as ‘America’s Number One Home Inspector.’ He founded AHI in 1994, and is a nationally-renowned author, speaker and environmental expert,” commented Edward L. Torres, Chairman and Chief Executive Officer of ESP. “As President of IESO, Rich will bring a unique perspective on environmental trends from across the country. That will allow ESP to respond quickly to the needs in the marketplace and to stay on the cutting edge of technologies, equipment and services.”

ESP acquired AHI in February, 2007. AHI offers a high-level household environmental inspection training curriculum along with the professionally-designated Certified Environmental Home Inspector (CEHI) Program. The CEHI Program consists of a suite of environmental services: allergen screening, energy inspections, mold testing, moisture management program, neighborhood environment reports, radon testing, and new builder program. ESP/AHI offers training, stringent protocols, scheduling and administrative support for the CEHIs, all of whom deliver the company’s “gold standard” inspection and management services to the market.

About Environmental Service Professionals, Inc.

Environmental Service Professionals, Inc. is the first publicly-traded company established to consolidate the highly-fragmented home inspection industry and to specialize in environmental inspections. ESP is focused on the development and delivery of state-of-the-art procedures and tools to provide environmental services for addressing many environmental issues in the home and workplace. Its Healthy Home Assurance mission results in the mitigation of risk across the board for homeowners and for mortgage, title and insurance companies. The company’s motto is “peace of mind for your family, your home and your health.” For more information, visit the ESP web site at www.espusa.net.

Safe Harbor

Statements in this press release may constitute forward-looking statements and are subject to numerous risks and uncertainties, including, but not limited to, a lack of adequate capital to enable the Company to execute its business plan or make important business acquisitions in order to grow; the failure to successfully complete the development of new or enhanced products and services; the lack of market demand for any of the Company’s existing or new products and services; failure to grow the Company’s businesses, a decline in revenues and stock price; litigation adversely affecting the Company; failure to operate profitability; operating losses that may impair the Company as a going concern; any actions by the Company or its affiliates that may have adverse effects on the Company’s financial condition, operating results or business performance; the success of competitive products and services; other economic factors adversely affecting the Company and its markets; seasonal changes; and other risks detailed from time to time in the Company’s filings with the U.S. Securities and Exchange Commission. Actual results may differ materially from those expressed in this press release. The Company disclaims any obligation to update any statements in this press release.

Posted by Industrial-Manufacturing at 05:58 AM | Comments (0)

Wrecking Corp Wins Demolition Contract for Waterfront Mall Project in Southwest DC

Wrecking Corporation of America has been awarded a contract for the demolition Waterfront Mall at 4th and M Streets in southwest DC, including excavation for a new structure for the site. The project consists of razing 1.2 million square feet of concrete structure, plus 75,000 cubic yards of excavation, and 35,000 cubic yards of backfill. In addition, concrete crushing and recycling will be done on site.

Alexandria, VA (PRWEB) October 24, 2007 -- Wrecking Corporation of America, which has provided demolition services to major industrial, commercial, and government clients in the Washington DC, Virginia, and Maryland metropolitan areas for more than 30 years, has been awarded a contract for the demolition Waterfront Mall at 4th and M Streets in southwest DC. The project also includes excavation for a new structure for the site. The general contractor for the project is the Clark Construction Group LLC of Bethesda.

"This is the largest single building in the District to be razed," said Terry Anderson, Wrecking Corp executive vice president, "and it's part of the master plan for the renewal of the DC waterfront. The building is a massive concrete structure that has to be hand-separated from the buildings that are to remain. Wrecking Corp has razed hundreds of buildings in cramped urban areas, and is skilled in the dealing with the unique challenges such projects represent."

Three businesses will remain on the mall site: a branch of Bank of America, a CVS pharmacy, and a Safeway store. The project consists of razing 1.2 million square feet of concrete structure, plus 75,000 cubic yards of excavation, and 35,000 cubic yards of backfill. In addition, concrete crushing and recycling will be done on site.

About Wrecking Corporation of America:
Wrecking Corporation of America took down its first downtown DC building 30 years ago. Headquartered in Alexandria, VA, Wrecking Corp. has worked on hundreds of high-profile projects downtown and in the surrounding metropolitan areas, including 1900 Pennsylvania Avenue and the former Washington Convention Center. Wrecking Corp. specializes in the challenges of demolition and excavation on high-profile commercial projects and cramped urban sites as well as sprawling multi-building complexes. For more information, visit the Wrecking Corp. web site at www.wreckingcorp.com or call 703.823.3850.

Posted by Industrial-Manufacturing at 05:57 AM | Comments (0)

November Launch Set for "Countdown" Campaign to Promote Canadian Exhibitors at International Builders Show

Multimedia initiative will spotlight and drive incremental trade traffic for participating companies.

New York, NY (PRWEB) October 24, 2007 -- A new marketing campaign to focus trade attention on Canadian exhibitors at the upcoming International Builders Show (IBS) in Orlando, FL, is set to launch in late November and run through the close of the event in mid-February 2008.

The campaign, titled "Canada: Countdown to IBS 2008," is an integrated multimedia initiative designed to inform construction professionals in advance of the event, particularly in the United States, about participating Canadian building product manufacturers, builders and affiliated organizations, and motivate them to visit their exhibits at the show.

"Canada 'Countdown' recognizes how competitive the market for attention is among IBS exhibitors, and introduces a sustained and measurable alternative to last-minute or one-dimensional promotion," said campaign director Chris Meyer, president of IAR Marketing. "Considering the time and money companies spend just to attend an event, a low-cost, high-impact 'Countdown' approach can significantly boost the return on an exhibitor's investment in trade show marketing."

In print, online and on-site, the "Countdown" campaign will promote participating companies to building professionals, specifiers, decision-makers and influencers who may attend the IBS event, as well as those who want to know, but may not go.

The "Countdown" campaign media plan includes:

Trade advertising with "BUILDER Online," the web site of BUILDER magazine, the official magazine of the National Association of Home Builders and IBS
A campaign community website at CanBuild.org, the official site of Canadian Export Development, Inc.
Frequent e-newsletters and alerts
Media and public relations
Plus a "Preview Program and Executive Event Planner" that will be distributed electronically before the show and in a hard-copy magazine format onsite, with bonus distribution at the annual "Canada Night" VIP Reception hosted by the Canadian Trade Commissioner Service

Distribution of campaign materials will be coordinated to build marketing momentum in advance of IBS for participating companies.

To learn more about the "Canada: Countdown to IBS 2008" campaign, including sponsorship options, visit Canadian Export Development and click on the "Countdown" clock.

About IAR Marketing
IAR Marketing is a strategic business development/brand marketing practice dedicated to help businesses, membership/professional organizations and advocates leverage innovation to gain access to markets and develop sustainable, profitable relationships with customers and influencers. For more information, visit IAR Marketing

Posted by Industrial-Manufacturing at 05:56 AM | Comments (0)

Penetron Helps Keep the Trains Rolling in Guangzhou, China

Penetron Admix is selected to protect concrete structures of the Multi-Billion dollar project known as the Guangzhou Metro.

East Setauket, NY (PRWEB) October 24, 2007 -- The city of Guanghzou (formerly known as Canton) is the third largest in China. In December 1994 it became the second, after Shanghai, to order a new light-rail system. This city of 7 million inhabitants is situated in the South near Hong Kong. Construction of a subway network was approved in 1989 and construction started in 1993.

With an estimated completion date of 2010 and an expected total of more than 16 lines and projected total costs of more than US$10 billion dollars, the Guangzhou Metro (GZM) will offer its citizens the latest in metro technology and efficiency.

Building an underground metro in this city is no simple feat. Guangzhou is a port city straddling the mighty Pearl River where water tables and waterproofing are high on the list of concerns for the engineers of the GZM. Due to the varied soft ground conditions nearly all the main modern tunneling methods were employed: shallow mining methods, shield driven tunnels as well as cut and cover methods. Part of Line 5, currently under construction, will even cross the Pearl River. To achieve this, the Metro will be constructed in a 457m immersed tunnel.

With such a wide variety of tunneling methods being used, it is no wonder the engineers needed to incorporate time tested and proven waterproofing solutions that met their specific needs. Penetron Admix was approved to be added to the fresh concrete to address some of these waterproofing concerns. By using Penetron Admix in the concrete, engineers are assured that they are receiving the best protection in concrete admix waterproofing technology. This also addresses other logistical concerns such as time saved by not having to install a membrane or drainage system or delaying backfilling operations as a result.

To date, some 70 tonnes of Penetron Admix has been successfully used on the GZM.

"The Guangzhou Metro is a testament to Chinese engineering prowess and Penetron is proud to be working with such inspired people" stated Robert G. Revera, CEO and Managing Partner of ICS Penetron International, Ltd, "We are pleased that Penetron has been given the opportunity to help preserve the Guangzhou Metro for the City of Flowers for many generations to come."

ICS Penetron International, Ltd., is a leading manufacturer of integral crystalline waterproofing and repair products for concrete with a manufacturing and service network that spans more than 60 countries. For more information on Penetron products, please visit our website at www.penetron.com or contact Ann Martucci at 631-941-9700 or email at info(at)penetron.com.

Posted by Industrial-Manufacturing at 05:56 AM | Comments (0)

Abelard Construction Company and National Storm Management, Inc. Discontinue Merger Discussions

Companies reach mutual agreement to pursue different paths.

Maryland Heights, MO (PRWEB) October 24, 2007 -- Abelard Construction Company announced in April of 2006 that merger discussions with National Storm Management, Inc. had been terminated. Terry Kiefer, President of National Storm Management, Inc., stated: "We are disappointed that the two organizations could not reach a definitive agreement, but felt it was in the best interests of both to pursue different paths. Our management team will now focus on continuing to seek other acquisition opportunities."

Brian Southard, one of Abelard's principals, resigned from his position as Vice President Sales and Marketing of National Storm Management, Inc., effective March 24, 2006.

About Abelard Construction. Abelard Construction is headquartered in Maryland Heights, Missouri, with offices in Maryland Heights; Indianapolis, Indiana; Columbus, Ohio and Brooklyn Center, Minnesota. Abelard is committed to the communities it serves, and keeps established branches in place, providing employment and resources for long-term cooperative growth. Visit www.abelardconstruction.com or call 1.888.260.ROOF.

About National Storm Management, Inc. National Storm Management is an expanding national construction company specialized in storm restoration management that works closely with affiliates in seven states.

MEDIA CONTACT:
Dave Dix
Small Business Mavericks
512.257.1605
dave(at)melberg.com

Posted by Industrial-Manufacturing at 05:55 AM | Comments (0)

Former MN Gophers Athletic Star Joins Lommen Abdo Law Firm; Lee Hutton III Brings Sports Representation to Firm's Growing Entertainment Practice Plus Considerable Trial Skills

A former Golden Gopher letterman has joined the law firm of Lommen, Abdo, Cole, King & Stageberg, P.A., effective October 1, 2007. Lee Hutton III, who played for the Gophers between 1994 and 1999, brings sports representation of players from the NFL and area coaches to the firm's growing entertainment practice, plus considerable litigation skills in construction law, products liability, premises liability, advertising law and other areas. Hutton was previously at Johnson & Condon, P.A., in Edina, MN, where he was an Associate Attorney in the Liability and Litigation Group (2003-2007). With entertainment law offices in New York and Minneapolis, the law firm boasts one of the largest entertainment practices in the Midwest. Lee will further expand its roster of music, film, game, literary and other intellectual property issues with his experience in player- and sports-related contracts, says Ken Abdo, Co-Chair of the entertainment division at the firm.

Minneapolis, New York, Hudson, WI (PRWEB) October 23, 2007 -- Former MN Gophers Football, Track and Field Star joins Lommen Abdo Law Firm; Lee Hutton III brings sports representation to firm's growing entertainment practice plus considerable trial skills.

A former Golden Gopher letterman has joined the law firm of Lommen, Abdo, Cole, King & Stageberg, P.A., effective October 1, 2007. Lee Hutton III, who played for the Gophers between 1994 and 1999, brings sports representation of players from the NFL and area coaches to the firm's growing entertainment practice, plus considerable litigation skills in construction law, products liability, premises liability, advertising law and other areas. Hutton was previously at Johnson & Condon, P.A., in Edina, MN, where he was an Associate Attorney in the Liability and Litigation Group (2003-2007).

"Lommen Abdo is an ideal place for me to grow both my skills as a litigator and my practice in sports and entertainment law. There are not many law firms that would allow me to do both," Hutton says. "The firm's substantial relationships throughout the entertainment industry and the corporate community provide a great foundation for my sports clients to help them further their careers and their businesses. But I'm also excited to be joining a law firm with a history of successful litigation that dates back more than 70 years."

With entertainment law offices in New York and Minneapolis, the law firm boasts one of the largest entertainment practices in the Midwest. Lee will further expand its roster of music, film, game, literary and other intellectual property issues with his experience in player- and sports-related contracts, says Ken Abdo, Co-Chair of the entertainment division at the firm.

"We believe Lee will grow his already significant sports practice as part of Lommen Abdo's legal entertainment services," Abdo notes. "Lee has the grid iron-honed drive, talent and skill. We're thrilled to have him on our team. This is definitely important yardage for our practice."

"Gopher football fans will remember number 3 for his aggressive and competitive spirit on the field," says Margie Bodas, Attorney/V.P. Practice Management for Lommen Abdo. "His outgoing nature, strong communication skills, and community participation--including his affiliation with the Norwegian Norske Torske Clubben, perhaps the only membership held by an African-American in Minnesota --- make him a great asset for current and future clients of the firm. His substantial business trial experience and sports practice that serves players, coaches, educational organizations and local nightclub establishments make him a double threat."

Hutton's clients and colleagues expect the best and get it from him
Those same sentiments were reflected in remarks from former and current clients and longtime colleagues:

"Lee always has done a good job for us," says Jim Clark of Great Plains Supply Co., based in Oakdale, MN, who retained Hutton for about 30 cases of water intrusion where the company was charged with water-related damages as a subcontractor in the residential home building industry. "He's aggressive and smart and has done very well defending our company."

"Things really changed once we started working with Lee," explains Jim Jordan, a general contractor with the 12-year-old Prairieland Homes company in Mankato, MN. "We were working with other legal representation but felt like we were not gaining any traction. Lee really charged ahead and he really knows his stuff on construction litigation. He's aggressive, knowledgeable and a good communicator, plus he's enjoyable to work with."

"Lee's always shown leadership ability, from the time he was on student committees in college to his professional duties as an attorney," says Darrell Thompson, who broadcasts Gophers football games for WCCO Radio and who also is the Executive Director of Bolder Options, a youth program that helps young juvenile offenders. "I've know him for 10 years and he's very capable of getting things done, whether it's a reconciliation process or working with sports and agents. Lee's got great capacity for accomplishment and goes above and beyond what's required of him. He has always been someone you could trust to get things done."

About Lee Hutton III
A Texas native, Hutton came to the University of Minnesota on an athletic scholarship and had an outstanding academic and athletic career while at the U. He was recruited by Coach Wacker and played under Coach Glen Mason. He also met his future wife at the university. The couple has two children and lives in Brooklyn Park.

EDUCATION
William Mitchell College of Law (1999-2002) St. Paul, MN
Juris Doctor, 2002
· President-elect of the Black Student Lawyer Association (2000-2002)
· CALI Award for Work of the Lawyer (2002)
University of Minnesota (Twin Cities) (1994-1999) Minneapolis, MN
Bachelor of Arts, Journalism (Emphasis Advertising) (1998)
Bachelor of Arts, Speech Communications (1999)
· NCAA Division I Athletics
· University of Minnesota Community Involvement Award (1999)
· University of Minnesota Student Athlete Advisory Representative serving on Big Ten Counsel headed by Commissioner James E. Delany
· President, Student Athlete Advisory Committee (1996-1999)
· Vice-President, Student Athlete Advisory Committee (1995-1996)

PROFESSIONAL AFFILIATIONS
· Minnesota State District Court
· Federal District Court, District of Minnesota
· Minnesota State Bar Association
· Minnesota Defense Lawyers Association
· Hennepin County Bar Association
· NFLPA Certified Contract Advisor
· WNBA Certified Contract Advisor
· ABA Sports and Entertainment Association
· Minnesota Association of Black Lawyers

COMMNUITY/LEADERSHIP ROLES
· Board of Directors - YMCA (North Branch) - (2004-Present)
Board Chair, Finance Chair
· Board of Directors - Minneapolis Urban League Committee - (2003-Present)
Board Chair, Human Resources Group
· Board of Directors - Skills for Tomorrow High School - (2005-Present)
· Adjunct Professor - St. Thomas School of Law (2003-2007)
· Board Member - North Memorial Nursing Review Board - (2002-2007)
· Volunteer Hurdles High School Girls/Boys Coach - (2004-Present)

For more information - or to interview Lee Hutton III - please contact Martin Keller, Media Savant Communications Co., 612-729-8585, mkeller @ mediasavantcom.com.

Posted by Industrial-Manufacturing at 05:54 AM | Comments (0)

October 23, 2007

Real Estate Marketing Company Launches New Real Estate Listings Website

Yourkasa offers resources for homeowners, buyers, and real estate professionals.

Atlanta, GA (PRWEB) October 23, 2007 -- Yourkasa.com, the premiere online real estate marketing company offering resources for homeowners, buyers and real estate professionals, is pleased to announce the launch of the company's new website and real estate listings service, Yourkasa.com. The website focuses on providing a risk-free marketing service for sellers and a one-stop-shop for buyers across the United States to find homes available for sale.

The minimal overhead cost associated with providing Yourkasa's real estate marketing services enable the company to provide a wealth of resources and value to buyers and sellers at a low cost. The site caters to busy buyers who do not have a lot of time to invest in research. Yourkasa.com enables buyers to enter search criteria for the home they desire and receive real estate listings for homes advertised on multiple websites, decreasing search time and optimizing users' ability to comparison shop. The website also enables buyers to save search criteria and to request to be notified automatically via email when property matching their criteria is located.

Yourkasa also offers a variety of real estate marketing services to benefit those who are selling a home. In the past, home sellers had to post an advertisement in the newspaper's classifieds sections and wait for a response. At Yourkasa.com, sellers can post profiles in the real estate listings detailing homes for sale, including multiple photos of homes' interiors and exteriors and interactive maps. When a buyer is interested in a seller's house, he or she has the capability to reach the seller via phone, e-mail or text message, decreasing turn-around time and, ultimately, improving chances of selling the home.

"For the same price that many people spend on lunch, a home seller can list their home. Yourkasa.com provides a cost effective way for home sellers to extend their marketing dollar. Also, anyone can access endless home buying and selling resources on Yourkasa.com," said Neil Terc, President of Yourkasa.com. "Whether you are looking for the perfect home, in need of a mortgage, or struggling to sell your home, we have the services available to accomplish your goal," said Terc.

About Yourkasa.com
Yourkasa.com is a feature-rich online real estate property listing service that connects home sellers with home buyers. Packed with resources and easily navigable, the site provides sellers with the ability to market their homes to a large, targeted audience and enables potential buyers to view thousands of real estate property listings online via detailed profiles, pictures and maps. For more information, visit www.Yourkasa.com.

Posted by Industrial-Manufacturing at 03:37 AM | Comments (0)

FastMaint CMMS Maintenance Software Gets Tucows Highest Rating of 5-Cows

SMGlobal Inc.'s FastMaint CMMS maintenance software was recently reviewed by Tucows (www.tucows.com) and received a "5-Cow" rating, the highest rating possible. Tucows is one of the top software download sites on the Internet. Very few products receive a "5-Cow" rating.

Apex, NC (PRWEB) October 23, 2007 -- SMGlobal Inc.'s FastMaint CMMS maintenance software was recently reviewed by Tucows (http://www.tucows.com) and received the highest rating of "5- Cows". Tucows is one of the most popular software download sites on the Internet and has a library of over 40,000 programs. FastMaint CMMS is a computerized maintenance management solution (CMMS) suitable for industrial/ manufacturing plant maintenance, facilities/ building maintenance, fleet maintenance as well as general equipment/ machinery maintenance.

Tucows conducts a rigorous evaluation of software submitted to it for a review. Software products are evaluated on a number of factors including but not limited to; usability, installation, functionality, documentation, customer support, product website and more. Very few products receive a "5-Cow" rating.

FastMaint CMMS customers include Carnegie Mellon University, CIGNA, General Dynamics Robotics Systems, the General Services Administration (GSA), Mars Pet Care, Northrop Grumman Corporation and Westin Hotels. It is available in stand-alone, networked and web editions. Prices start at US$995 for the single user version. To download a 30-day trial of the product visit http://www.smglobal.com

About SMGlobal Inc.
Founded in 2002, SMGlobal Inc. is based in Apex, North Carolina. SMGlobal has been a member of Microsoft's Certified Partner program since 2004. SMGlobal's FastMaint CMMS maintenance management software earned SMGlobal Microsoft's ISV/ Software Solutions Competency in 2006. For more information, contact SMGlobal at (919) 647-9440 or visit www.smglobal.com.

All products mentioned are registered trademarks or trademarks of their respective companies.

Contact: SMGlobal Inc.
Phone: +1 919.647.9440
Web: http://www.smglobal.com

Posted by Industrial-Manufacturing at 03:36 AM | Comments (0)

Record Sales at Ross Bridge, Hoover, AL with 16 Signature Homes Sales in 1 Day

Signature Homes continues to lead the way with sales at Ross Bridge.

(PRWEB) October 23, 2007 -- Last week Signature Homes released six townhomes along Ross Bridge’s famous Robert Trent Jones Golf Trail Golf Course (www.rossbridge.com). They sold all six homes the day they were released.

They also released 18 other townhomes surrounding Ross Bridge’s Ross Park and Pool located in the coveted Village Center. They sold 10 of those 18 homes the same day they were released!

Together, Signature Homes sold 16 homes in one day.

The community of Ross Bridge and Signature Homes has been leading the market in sales since they opened their doors in July of 2005. Despite a decline in real estate sales nationally and regionally, Ross Bridge has continued to be successful. What’s their secret?

“The homes available today at Ross Bridge appeal to every level of the home buying market. From first time home buyers to custom estate homes, they all take advantage of the wonderful amenities and convenient location,” States Dorothy Tayloe, Director of Sales and Marketing for Daniel Homes. “This unique combination will always be appealing to home buyers regardless of market conditions.”

The appeal of a Signature Home is obvious the moment you see one. They are dramatically different than the typical, vanilla homes available to buyers at a similar price-point. Signature Homes driving principal is to build affordable, well-built homes with fresh architectural styles.

“We’re constantly evolving and improving our designs with interesting, yet livable floor plan layouts and exterior elevations that are the epitome of curb appeal,” boasts Dwight Sandlin, President of Signature Homes. “Variety is the spice of life and we season every one of our models with copious amounts to ensure our home buyers love everything about their home. It seems to be working.”

Leading New Home Sales for Master Planned Communities in 2007
Ross Bridge located in Hoover, Alabama continues to be Birmingham’s hottest selling new home community. Featuring single-family homes and townhomes built by the areas finest homebuilders from the mid $200's to over $1 million.

Home to the world-class Ross Bridge Golf Resort & Spa including the stunning 8,191 yard Robert Trent Jones Trail Golf Course, Ross Park, miles of historic trails, pool and clubhouse and The Village Center; complete with shopping, restaurants, services and entertainment — it’s no wonder why Ross Bridge has lead the market in sales for the past two years.

Despite recent news about the housing market, Ross Bridge continues to lead the industry in sales and settlements in 2007 with 186 contracts and 152 settlements prior to last week’s activity.

“With this latest flurry of activity from Signature Homes we have already met our projections for 2007 sales with two more months to go. We will sell and settle over 200 homes this year,” states Ms. Tayloe.

To date, the next three largest master planned communities in the market have only settled 121 new homes combined.

And the good news just keeps coming. Ross Bridge has just completed the sale of their newest neighborhood, James Hill, representing the largest commitment to date. Signature Homes will continue to build single family homes and townhomes in James Hill adding to their existing collections in other Ross Bridge neighborhoods including Freestone Ridge, Greenside, The Village Center and the fantastic show homes lining Grand Avenue leading towards the Resort. As always, Signature Homes plans to introduce new, stunning architectural styles at affordable prices in the James Hill neighborhood of Ross Bridge.

Ross Bridge Continues to Add More Amenities

In addition to the opening of Ross Park and Pool this past summer, plans have been announced for the Historic Ross Bridge Park across from Haddon, Ross Bridge’s newest neighborhood currently under development and another community pool.

Ross Bridge is showing no signs of slowing down.

Welcome Center 2101 Grand Avenue, Hoover, AL 35226
Phone (205) 443-4663
Open: Monday-Saturday 9am to 5pm
Sunday 1pm-5pm

www.rossbridge.com

Posted by Industrial-Manufacturing at 03:34 AM | Comments (0)

Vertechs Announces a New Home Elevator Built to Industrial Safety Standards

As the price drops, more homeowners and builders are opting to look at the residential elevator and the next home appliance.

(PRWEB) October 23, 2007 -- Vertechs Industries has developed a new and affordable home elevator that brings the features and safety of industrial elevators into the home just as homeowners begin looking at the residential elevator as the new home appliance.

Full automatic sliding elevator doors have long prevented accidents in commercial settings. Historically, design constraints have made such technology unavailable to homeowners. Vertechs has now changed the industry landscape with the introduction of safe and convenient "real" elevator doors. These doors are designed to perform in the same way as commercial elevators doors while staying within a homeowner's budget.

Vertechs Industries Inc., based in Ontario, Canada, a leader in elevator safety, makes it physically impossible for children or pets to get between the two sets of automatic double doors. Full-length light curtains sense any obstruction or movement and combine with a computer-based logic center to provide ultimate safety.

With of the convenience of fully automatic doors, there's no need to try to bypass the home elevator's safety features. If anyone attempts to bypass the system, the advanced controller detects any unauthorized alterations from its original set up, providing fault signals that prevent the elevator from moving until the fault is cleared and the elevator is safe to move.

"Why should people be protected in elevators outside their home but not in it?" asks Luis Barrios, General Manager of Vertechs Industries. "We promote home elevator safety and affordability in everything we do from the way it's designed, installed, used, and maintained."

"For safety and liability reasons, nobody should drive a car without a thorough safety inspection; for the same reasons nobody should use a home elevator unless it's built to code," declares Barrios, whose elevators are built to national, state and local codes including ASME/ANSI A17.1 2004, ICC/ANSI A117.1, and the NFPA 70 National Electric code.

To further safety and expedite correct installation while reducing cost, Vertechs has simplified residential elevator design in a number of areas. On critical elevator guide rails, which must be perfectly aligned for a safe, smooth ride, installers can typically take days to get the alignment, distance, and welds just right. To compress this process into a few hours, Vertechs pre-welds and pre-aligns the guide rail sections. Installers just align the guide rail sections with a laser beam then stack them.

The company has removed much of the guesswork and time consuming interpretation from architects' and installers' jobs as well. Where typical elevator drawings provide just the layout with the minimum dimensions and require the architect to decide many details, the company provides all the architectural specifications and details so there's no delay or misinterpretation.

To ensure that these elevators are built to code in the fastest, most efficient and cost effective way possible, Vertechs has even looked at how installers interact. Installers typically must dig through their toolboxes to find the correct tool and sometimes wait for each other to finish jobs before borrowing the right tool. Vertechs provides installers with identical toolboxes including all the tools needed for the job.

"It's about time that someone helped building professionals adapting multi-level construction to the needs of baby boomers and the marketplace," concludes Barrios.
"As boomers get older and property more costly, a safe convenient home elevator will keep boomers independent and mobile on multi-level floor plans. They are rapidly moving from luxury to the next home appliance."

Vertechs Elevator Systems
Luis Burrious
http://www.vertechselevators.com
Phone: 519-621-8443
Fax: 519-621-3211

Posted by Industrial-Manufacturing at 03:33 AM | Comments (0)

New Surety Claims Venture Launches Online Help for Legal, Construction Markets

Surety claims firm offers innovative online help, experts and consultants to neglected markets.

Alpharetta, GA (PRWEB) October 23, 2007 -- Surety Insider LLC, a new venture targeting the previously neglected legal and construction markets with surety claims experts and consultants, has announced its innovative online Quick Question option.

Until now, these highly specialized services were readily available only to surety companies. With the Quick Question option, availability extends broadly to most consumers within the multi-billion dollar US surety bond market.

"We expect a wide range of interest from disoriented first-time creditors to the most sophisticated owners, contractors and attorneys looking for a little more insight or an edge in a tough case," said the firm's owner, "This is a new development and we expect smart people will want to take advantage of it."

The firm stresses turn-around times, cost-efficiency and minimal formality as desirable features of its Quick Question option. It is available for users in any phase of the surety claims process and is yet another example of a niche filled on the World Wide Web.

The company also offers services of former surety claims industry insiders for consulting assignments in investigation, litigation, alternative dispute resolution and expert witness testimony.

Additional information is available at www.suretyinsider.com.

About Surety Insider LLC
Surety Insider provides experienced industry insiders as consultants and experts for clients in need of surety claims help.

Contact
Surety Insider LLC
Bryan Kelly - Principal
www.suretyinsider.com
(770) 696-1840

Posted by Industrial-Manufacturing at 03:33 AM | Comments (0)

Power Partners Goes Solar; Georgia Manufacturing Company Begins Manufacturing Lightweight Solar Water Heaters for Professional Installers and Do-It-Yourselfers

Power Partners announced today it has diversified its product portfolio and begun manufacturing a lightweight, roof-mounted solar water heater whose design enables easy installation by professional installers and do-it-yourselfers. The solar water heaters, whose design will be featured Oct. 28 on ABC's Extreme Makeover Home Edition program, are being marketed under the Power Partners Solar name.

Athens, GA (PRWEB) October 23, 2007 -- Power Partners, a leading manufacturer of pole-type distribution transformers, announced today it has diversified its product portfolio and begun manufacturing a lightweight, roof-mounted solar water heater whose design enables easy installation by professional installers and do-it-yourselfers. The solar water heaters, whose design will be featured Oct. 28 on ABC's Extreme Makeover Home Edition program, are being marketed under the Power Partners Solar name.

The solar water heaters will appeal to consumers who want to use green, renewable energy sources to reduce greenhouse gas emissions, wish to save significant money over time, and desire a lightweight product that is easy to install.

Water heating uses up to 30% of the energy in U.S. homes, making it one of the largest energy expenses in U.S. households. By using the sun's energy to heat water, solar water heaters offer a cost-effective, environmentally friendly way to reduce carbon consumption and CO2 generation. Consumers are never left without hot water, as the Power Partners solar systems are installed with a back-up source of water heating.

Diversifying from the manufacture of electrical transformers to solar water heaters is a natural extension of Power Partners' mission, according to Sherrie Ford, chairman and majority owner of the company. "Power Partners continues to serve the power industry, but by going green, we're stepping forward and doing something positive to mitigate global environmental challenges. Being a leader is a role each of our employees eagerly embraces. Solar thermal is an industry that is growing significantly each year, and the Power Partners Solar water heaters offer many advantages to environmentally- and cost-conscious residential, commercial and industrial users."

The Solar Water Heater Design Will Be Featured on ABC's Extreme Makeover:

Power Partners Solar water heaters are manufactured under license from SolarRoofs.com. The SolarRoofs.com design will be featured in the October 28th episode of ABC's Extreme Makeover Home Edition.

Power Partner Product Highlights:

Power Partners Solar water heaters offer the following features:

Durable and light weight polycarbonate materials that make the systems easy and safe to install single-handedly.
SRCC and FSEC certifications that give access to federal, state, and local credits or rebates. A federal tax credit of 30% tax credit is available on all Power Partner Solar systems, and many states and utilities offer additional incentives. Power Partners has developed a proprietary financial pay-back calculation method that maximizes pay-back for residential, commercial and industrial users, regardless of the incentives and rebates that may or may not be in place.
Complete or partial systems allow consumers to customize a system to their needs.
Over 20 trim colors, meaning almost any roof color can be matched.
Systems for both cold and warm climates.
Pumps that are entirely run by the sun and 100% green are available.

About Power Partners:

Power Partners (www.powerpartnersolar.com) is a leader in distribution transformers, selling transformers to most major utilities in the United States and throughout the world. It has a record of 50 years of high quality products and fast shipments in the electrical industry. The 13th largest woman-owned business in the U.S. as certified by WBENC, Power Partners has a 600,000 square foot facility in Athens, GA, that is operated by approximately 500 employees.

Information about Power Partners Solar water heaters can be obtained from Power Partners, Inc at www.powerpartnersolar.com or by calling Dan Everett at 1-800-545-3121, ext. 290.

Posted by Industrial-Manufacturing at 03:32 AM | Comments (0)

BidClerk.com Reports Construction Projects Up For Bid in the San Francisco, CA, Area

BidClerk's daily update of San Francisco construction projects coming up for bid and starting construction within the next 90 days.

(PRWEB) October 22, 2007 -- BidClerk, the Construction Industry Search Engine, reported today that the following commercial construction projects are planning to go out for bid or start construction in the next 90 days in the San Francisco, CA, area. Businesses interested in providing services relative to these projects should visit BidClerk.com and reference the Project ID listed below to obtain direct contact information for each job:

Antioch, CA -- Costco, 2201 Verne Roberts Cir., 120,075-square-foot retail store, December 2007, $10 million. Project ID: 564472

King City, CA -- Pacific Valley Bank, 743 Broadway St., 2,160-square-foot modular bank facility, November 2007, $100,000. Project ID: 617544

San Jose, CA -- 24 Hour Fitness, 1610 Crane Ct., 22,000-square-foot fitness center, December 2007, $1.2 million. Project ID: 682625

Oakland, CA -- Jack London Gateway Senior Housing, 8th Street and Market Street, 56-unit senior housing complex, December 2007, $5 million. Project ID: 450452

Burlingame, CA -- 888 Airport Boulevard -- Office Shell TI, 888 Airport Blvd., 3,300-square-foot office fit-out, December 2007, $100,000. Project ID: 683570

BidClerk.com is the only Search Engine dedicated to providing businesses with in depth information on thousands of construction projects coming up for bids all throughout the United States. Our daily updates of commercial and residential construction project leads are available to contractors and businesses in related industries that are seeking bid opportunities. For more information on bidding construction projects in your area, visit BidClerk online or call 877-737-6482.

Posted by Industrial-Manufacturing at 03:31 AM | Comments (0)

New High Volume Surface Pressure Washing Company That's Environmentally Safe

Clean Up America of California premieres its Swabby 48 hard surface BRUSHLESS pressure washing system that reclaims and recycles contaminated water.

(PRWEB) October 22, 2007 -- This week at the National Parking Association Trade Show in Hollywood, CA, Clean Up America of California (CUACA) will premiere its highly effective and efficient brushless high volume hard surface pressure washing company that saves water and is environmentally safe.

CUACA's Swabby 48 systems will save large amounts of water, and protect our environment, harbors, and beaches at the same time. CUACA is the alternative to the constant surreptitious washing activity and dumping of contaminated water into our U.S. Waterways and Storm Drain systems that environmentally impacts our harbors, ports and beaches, and wastes MILLIONS of gallons of water.

The patented Swabby 48 system washes a path of 48 inches at a rate of up to 10,000 square feet PER HOUR. The automated Swabby 48 system has four water nozzles rotating on an independent belt-driven system. The nozzles fire up to 4,000 Pounds per Square Inch (PSI) and heat water up to 180 degrees Fahrenheit, then our extraction system vacuums the contaminated water with a dedicated 38 horse-powered system. Water pressure and temperature are adjustable 1,000 to 4,000 PSI and ambient to 180 degrees Fahrenheit, respectively. Because the Swabby 48's nozzles operate with high pressure at a high temperature - they actually use less water on more surface area than a standard garden hose. The Swabby 48 system reclaims & recycles 80% of contaminated water (20% is lost to evaporation) during washing operations, and prevents ALL pollution from entering U.S. Waterways and Storm Drain systems in the Southwestern U.S. where water is a scarce resource and environmental protection enforcement is a high priority among local and federal governments. With the ability to reclaim and recycle water, the Swabby 48s can remain on a work-site for longer periods without having to refill for fresh water, which also results in less fuel usage and labor. The Swabby 48s get in and get out fast so that less water is used and your facility can resume routine operations immediately.

The Swabby 48 system evolved from late CUA systems that pressure washed the decks of military aircraft carriers since 1992. When the military required the pressure washing of their aircraft carrier decks to be fully U.S. Environmental Protection Agency (EPA) compliant and further preserve precious onboard fresh water storage, it tasked CUA to develop the Swabby 48. Now you can have military technology pressure wash your high volume surfaces.

CONTACT:

www.CUACalifornia.com

info@cuacalifornia.com

877-CUA-WEST

Clean Up America of California
824 E. Anaheim St, Suite B
Wilmington, CA 90744-6833

Posted by Industrial-Manufacturing at 03:31 AM | Comments (0)

Lincoln Institute Of Land Policy Presents Fall News Roundup

Growth in China, Land Use And Climate Change, and Taxes.

Cambridge, Mass (Vocus/PRWEB ) October 22, 2007 -- The Lincoln Institute of Land Policy, a think tank with a focus on the use, regulation and taxation of land, released its fall news roundup of tips and story ideas on urbanization in China, climate change and property taxes, among other topics:

A new book published by the Lincoln Institute, Urbanization in China: Critical Issues in an Era of Rapid Growth, edited by Yan Song and Chengri Ding, examines the environmental, social, and economic challenges of China’s rapid growth. “The urban growth we’re seeing in China is at an unprecedented scale -- over the next 10 years, China’s urban population is expected to grow by 15 to 20 million people per year,” said Gregory K. Ingram, president of the Lincoln Institute and co-chair of the International Studies department. “The growth has huge implications for urban areas, land policy and the environment, while the massive migration from rural areas will have important consequences in those communities as well.”

- The Emerging Role of Land Use in Climate Change is the topic of a one-day symposium at the Federal Reserve Bank, Boston Nov. 1, sponsored by the Lincoln Institute of Land Policy. Experts from around New England will address how smart growth policies and citywide climate action plans can achieve the goals of reducing greenhouse gas emissions and greater energy efficiency. “At a time when climate change is more and more on people’s minds, our goal is to bring a sharp focus on the land use component of planning for global warming,” said Armando Carbonell, senior fellow and chair of the Department of Planning and Urban Form at the Lincoln Institute. The event is free and open to the public but registration is required. The Lincoln Institute is engaged in the climate change-land use connection, by convening big city planners to discuss climate action plans, and initiating research on how land conservation management and urban planning must adapt to the changing conditions brought on by climate change.

- Residents in many states continue to grumble about property tax bills, and elected officials are heeding the call to reform. But the property tax actually puts residents in the driver's seat in terms of the level of services they are willing to pay for. That was the theme of an op-ed essay by Joan Youngman, senior fellow and chair of the Lincoln Institute's Department of Valuation and Taxation, and visiting fellow Andrew Reschovsky, published recently in The Boston Globe. "We get the bill, and compare it with the local services we receive. If the comparison is unfavorable, we are motivated to restrict local spending and support local candidates who agree with that view. Linking additional local spending to local taxes is an important source of fiscal discipline," the authors wrote. The property tax continues to be a focus of Lincoln Institute research, including an upcoming Policy Focus Report on the use of property tax revenue to fund schools. In addition, a talk at Lincoln House Nov. 2 in Cambridge will address the dependence on property tax revenues in older industrial cities.

- They are the pillars of city life: the museums, libraries, colleges and universities, arts centers, sports facilities, and medical centers that provide employment and services purchasing, and in many cases a strong sense of identity and civic pride, in the nation’s cities. These urban “anchors” are increasingly working with municipal officials to accommodate mutual interests and grow in sync with residents in the neighborhoods where they are located. “Anchor institutions are economic engines, and cities and these institutions depend on each other,” said Rosalind Greenstein, senior fellow and chair of the Department of Economic and Community Development at the Lincoln Institute, which was a partner in the conference, “Urban Anchors in the 21st Century,” at the University of Pennsylvania in Philadelphia Oct. 8-9. In addition, a recently posted Lincoln Institute paper examines university real estate development.

- Community Land Trusts, where a private, nonprofit corporation retains the ownership of the land and removes the cost of land from the price of homes, have grown steadily as one strategy to provide permanently affordable housing, according to a survey by the Lincoln Institute. The survey drew responses from 119 CLTs providing 6,495 homes created for primarily very low and low-income families, with the units about evenly split between owners and renters. CLTs exist primarily in urban areas but also serve suburban and rural areas and small towns; most have less than 100 units. The first CLT in the United States, New Communities Inc., was established in 1968 in rural Georgia. While there were about two-dozen in the 1980s, growth accelerated in the 1990s and subsequently. Today CLTs are mostly concentrated in the Northeast (37 percent) and the West (29 percent), with the remaining in the Midwest (19 percent) and the South (15 percent). The survey findings are available in the July-August issue of the online column At Lincoln House.
Contact Anthony Flint at anthony.flint(@)lincolninst.edu for sources, experts and resources.

Posted by Industrial-Manufacturing at 03:30 AM | Comments (0)

Versabuoy International Announces Breakthrough Technology for Deepwater Platform System

Versabuoy International announces a new deepwater platform system, consisting of articulating spars, which brings deepwater land mass creation closer to fruition. Model tests for this new platform system show ten times more stability in rough waters. New capability could lead to mobile offshore real estate.

(PRWEB) October 22, 2007 - Versabuoy International announces a new deepwater platform system that could change the way the world uses deepwater. The key to the new platform system is the articulating spars. The length of the spar keeps heave to a minimum while the articulating joint absorbs wave energy keeping the platform level. This innovation brings deepwater land mass creation closer to fruition.

Model tests for the platform have proven that the Versabuoy System is 5 to 10 times more stable in harsh marine environments such as hurricanes, typhoons and rogue waves.

"This could change the way the world uses deepwater," says Versabuoy CEO Steve Khachaturian. Creating man made islands and portable land masses is something that has never before been possible. Versabuoy's new platform design offers the first proof that it is actually feasible. Now the company wants people to look forward to what is possible with 71% of the earth, much of it in deepwater.

Khachaturian adds, "It's possible to create not only a more stable platform for the oil and gas industry, but because we can connect our platforms together, you can create floating, moveable land masses like floating airports, renewable energy platforms for wind turbines or hydrogen production, private islands, floating casinos, floating prisons, oil refineries, offshore ports and even mobile offshore real estate! And because of fabrication and deployment strategies, we believe our platforms will cost roughly half that of the oil and gas platforms."

For more information about Versabuoy visit Vbuoy.com.

About Versabuoy International and Versabar, Inc.:

Versabuoy International and Versabar, Inc. were founded by Jon Khachaturian, owner of more than 35 worldwide patents and one of the world's most innovative engineers. The idea behind Versabuoy dates back 7 years, when a group of oil companies asked Jon Khachaturian to devise a way to keep a platform stable during a deepwater lift. The solution was to support the deck with four columns extending down from each corner of the platform. Khachaturian then devised an articulating joint at the top of each column. That allows the columns to be moved by waves while the platform remains relatively motionless. Versabar, Inc. has provided custom rigging systems for over 25 years and has made over 35-thousand lifts worldwide.

Posted by Industrial-Manufacturing at 03:29 AM | Comments (0)

Spacesaver Dealer McMurray Stern Awarded The Colburn School Storage Solutions Contract

The Colburn School in Southern California has awarded their storage solution contract to McMurray Stern, the exclusive Spacesaver Area Contractor for the Greater Los Angeles, Riverside, Orange County and Central Coast Areas.

Los Angeles, CA (PRWEB) October 22, 2007 -- The Colburn School in Southern California has awarded their storage solution contract to McMurray Stern, the exclusive Spacesaver Area Contractor for the Greater Los Angeles, Riverside, Orange County and Central Coast Areas. Multiple storage solutions have been designed to include cantilever shelving in their newly constructed library facilities, and high density mobile systems for the storage of their expansive music collections.

"According to the Colburn School, student enrollment in music instruction alone has grown by 75% in the past five years," stated Matt Denburg, President of McMurray Stern. "And this unprecedented growth is inevitably accompanied by the challenge of optimizing storage."

The Spacesaver mobile systems will be hosted in their newly developed 326,000 square-foot, 12-story high rise. This project was designed by the architectural firm, Pfeiffer Partners and has acoustically isolated teaching and performance spaces, a 200-seat performance lab, a 4,000 square-foot rehearsal hall, expanded library facilities, 20 teaching studios, 4 classrooms, a percussion studio, 50 practice rooms, residential housing for up to 145 students, and a student lounge and a cafeteria.

For more than 50 years, The Colburn School has provided music, dance and drama training from introductory to advanced levels. In addition, The Colburn School presents a full season of admission-free performances of music, dance, mime and drama. The School's Conservatory of Music and School of Performing Arts together form a coherent continuum of education in the arts. A video clip about the new expansion can be found on their website at: http://www.colburnschool.edu/colburnMovie.html

About McMurray Stern
As a 27 year strong company founded in 1980, McMurray Stern is the leading source of design and build solutions for filing and storage systems in Southern California. They have been the exclusive Southern California Area Contractor for Spacesaver Corporation since inception, and have continued their relationship with Spacesaver with no interruptions. This significant milestone places McMurray Stern in an elite group of providers who have successfully improved the way business offices, libraries, healthcare facilities, schools, museums, justice facilities, and industrial facilities manage filing and storage operations. Some of their services offerings include; structural evaluations and calculations, cost analysis, budgetary evaluations, consulting design services, relocation planning and coordination, and document conversions, file tracking and imaging application implementation.

More information can be found on their website:
www.mcmurraystern.com, or by contacting them directly at 562.623.3000.

Posted by Industrial-Manufacturing at 03:29 AM | Comments (0)

Houston Courier Service Opens New Climate Controlled Warehouse

Hot Shot Delivery, Houston's leading provider of same day courier services and warehousing solutions, today announced the expansion of their Houston operation with the opening of a new climate controlled warehouse.

Houston, TX (PRWEB) October 22, 2007 -- Hot Shot Delivery, Houston's leading provider of same day courier services and warehousing solutions, today announced the expansion of their Houston operation with the opening of a new climate controlled warehouse.

Located in the heart of Houston, Hot Shot Delivery has been providing same day delivery and warehousing solutions to clients for over 29 years. What began as a small messenger service in 1978 has grown to maintain one of the largest fleet of drivers in the Houston area, operate multiple warehousing facilities and coordinate nationwide trucking and logistics services.

The new warehouse offers over 7,500 square feet of climate-controlled space available to customers for strategic stocking, inventory management, critical parts storage and fulfillment. In addition, measures have been taken to ensure a secure and monitored environment in order to maintain the safety of critical inventory.

"By adding the new warehouse, we are now able to provide a climate-controlled solution to customers needing a secure option for off-site storage." said Eric Donaldson, Vice President, Hot Shot Delivery, Inc. "This addition, along with our existing warehouse space, provides over 65,000 square feet of warehouse offered by Hot Shot Delivery. We will continue to expand our services and space to fulfill our commitment to providing the highest level of service to our customers."

Houston same day courier service information or warehousing needs can be obtained by calling (713) 869-7575 or by visiting www.hotshot-delivery.com.

About Hot Shot Delivery
Hot Shot Delivery, Inc. is a full service same day delivery and logistics company, serving clients of all sizes and across all industries throughout Houston. Founded in 1978, Hot Shot Delivery Inc. has established a reputation for reliability and consistent on time performance which has enabled steady growth while retaining a diverse client portfolio. Additional information can be found by calling (713) 869-7575 or visiting the company website at www.hotshot-delivery.com.

Posted by Industrial-Manufacturing at 03:28 AM | Comments (0)

VWLee.com Launches Electrical Sub Contractor Services Portal for the UK

VW Lee Control Installations Ltd., an experienced and trusted supplier of skilled electrical personnel, has launched VWLee.com - a portal specialising in electrical subcontractor services in the UK.

London, UK (PRWEB) October 22, 2007 -- VW Lee Control Installations Ltd., an experienced and trusted supplier of skilled electrical personnel, has launched VWLee.com - a portal specialising in electrical subcontractor services in the UK.

Established in 1997, VW Lee specialises in HVAC Controls, Electrical Installation, and Commissioning. Its clients range from small local businesses, through to large international PLCs, including: Johnson Controls Ltd., and Sandford Electrical Projects Ltd.

Mary Lee, Managing Director of V.W. Lee said, "In launching VWLee.com we're offering our Clients a faster and simpler method of receiving no obligation contract quotations. And, for our Sub-Contractors the website offers up-to-date information on the latest vacancies and opportunities."

Lee continued, "In addition to serving the needs of our existing Clients and Sub-Sub-Contractors, we are confident that VWLee.com will become an essential one-stop-shop, for electricians, electrical engineers, self-employed sub-contractors, and businesses looking for information on Electrical Sub Contractor Services in the UK."

VWLee.com offers various features, including: online quotation tool for Clients; a real-time CV submission process for Electricians; a database of useful industry related links; and a range of free downloads including free PDF calendars for 2007 and 2008.

See: http://www.vwlee.com for more information!

About V.W. Lee Control Installations Limited:

V.W Lee is a leading supplier of skilled electrical personnel, specialising in Business Management Systems, HVAC Controls, and Electrical Installations. Clients range from small local businesses, through to large international PLCs.

Posted by Industrial-Manufacturing at 03:28 AM | Comments (0)

Abelard Certifies Seven in CertainTeed Quality Programs

In St. Louis, Sales Reps, Quality Control Inspector, and GM All Achieve Master Shingle Applicator Wizard Status; GM Adds Quality Master Certification

St. Louis, MO (PRWEB) October 22, 2007 -- Abelard Construction, the premier residential restoration firm in the Midwest, announced today that seven employees in its St. Louis office have completed rigorous quality training and certification from CertainTeed, North America's leading exterior and interior building products brand.

"CertainTeed's Master Shingle Applicator certification is the gold standard in roofing," said Brian Southard, Abelard co-owner. "Abelard Construction is relentlessly committed to quality, and so it was absolutely critical for us to invest the time and expense in putting all five of our lead sales reps, as well as our quality control inspector, through this training."

The Master Shingle Applicator™ program provides education in every aspect of shingle installation techniques, and the approved procedures for installing all CertainTeed shingles. The program covers topics such as workmanship, roof systems, estimating, flashing, ventilation, and product installation instructions.

In recent years Abelard has created hundreds of jobs in the St. Louis area, and Southard credits the company's growth to Abelard's commitment to quality, customer satisfaction, and employee training. With a unique quality control system in place, Abelard has one of the lowest warranty calls or "leak" rates in the industry.

About Abelard Construction. Abelard Construction is headquartered in Maryland Heights, Missouri, with offices in Maryland Heights; Indianapolis, Indiana; Columbus, Ohio and Brooklyn Center, Minnesota. Abelard is committed to the communities it serves, and keeps established branches in place, providing employment and resources for long-term cooperative growth. Visit www.abelardconstruction.com or call 1.888.260.ROOF.

About CertainTeed
Through innovation and creative product design, CertainTeed has helped shape the building products industry for more than 100 years. Founded in 1904 as General Roofing Company, the firm made its slogan "Quality Made Certain, Satisfaction Guaranteed," which quickly inspired the name CertainTeed. Today, CertainTeed is North America's leading brand of exterior and interior building products, including roofing, siding, windows, fence, decking, railing, trim, foundations, pipe, insulation, walls, ceilings and access covers. Headquartered in Valley Forge, Pennsylvania, CertainTeed and its affiliates have approximately 8,000 employees and nearly 70 manufacturing facilities throughout the United States and Canada. In 2006 the group had consolidated sales approaching $4 billion. www.certainteed.com.

MEDIA CONTACT:
Dave Dix
Small Business Mavericks
512.257.1605
dave @ melberg.com

Posted by Industrial-Manufacturing at 03:27 AM | Comments (0)

Abelard Joins as Sponsor to Help End Hunger

The Neighborhood House Hunger Learning Series works to eliminate hunger in Minnesota, and help low-income Americans move from poverty to self-sufficiency.

Minneapolis, Minnesota (PRWEB) October 22, 2007 -- Abelard Construction, the premier residential restoration firm in the Midwest, announced today that it has agreed to sponsor the Neighborhood House Hunger Learning Series, 2007. The Hunger Learning Series is a series of leadership conferences engaging policymakers, emergency food system staff, public and private sector leaders, and the public at large. Its purpose is to build the community will to end hunger in Minnesota.

"Abelard Construction started out as a business helping people make it through tough times resulting from storms, accidents, or other unforeseen home maintenance requirements," says Brian Southard, Abelard co-founder. "The Neighborhood House is locally based, focused on helping new immigrants and homeowners, and has a mission that aligns tightly with our own goals as a company."

The final 2007 Neighborhood House Learning Conference, expected to draw 300 attendees, will be held November 8, 2007, at the Paul and Sheila Wellstone Center for Community Building in St. Paul.

Besides Abelard Construction, other sponsors include Land O' Lakes, Inc., the Greater Twin Cities United Way, Seneca, and the Minneapolis Foundation. Confirmed speakers at the event include Joel Berg of the New York City Coalition against Hunger; Representative Marty Seifert (R-MN); Sue Kainz, Campaign Coordinator at Minnesota Food Share; Senator Mee Moua (invited); Lydia Botham, Executive Director at Land O' Lakes, Inc. (invited); Mike Luker, and CEO Cargill Kitchen Solutions (invited).

Hunger Partners committee members who will share community recommendations to end hunger in Minnesota include Marcia Fink, Basic Needs Director at the Greater Twin Cities United Way; Colleen Moriarty, Executive Director of Hunger Solutions; Barbara Thell, Executive Director of Minnesota FoodShare; John Kemp, Executive Director of Neighbors Inc.; and Tim Barnes, Executive Director of the Emergency Foodshelf Network.

Abelard's sponsorship will be applied to cover all or partial conference registration fees for individuals and non-profit organizations seeking assistance in attending the events.

About Abelard Construction. Abelard Construction is headquartered in Maryland Heights, Missouri, with offices in Maryland Heights; Indianapolis, Indiana; Columbus, Ohio and Brooklyn Center, Minnesota. Abelard is committed to the communities it serves, and keeps established branches in place, providing employment and resources for long-term cooperative growth. Visit www.abelardconstruction.com or call 1.888.260.ROOF.

About Neighborhood House. Founded in 1897 to provide basic services to immigrant families, Neighborhood House is a multicultural, multilingual community center with services for all ages and open doors for all people. It is often a first stop for new immigrants and refugees. Neighborhood House fulfills its mission by providing emergency assistance, long-term social assistance, youth activities, family enrichment, culturally specific education and empowerment initiatives, AmeriCorps*Youth Works, scholarships, seniors services, and much more. Visit http://www.neighb.org or call 651.789.2500.

MEDIA CONTACT:
Dave Dix
Small Business Mavericks
512.257.1605
dave @ melberg.com

Posted by Industrial-Manufacturing at 03:27 AM | Comments (0)

Pixelweave 3D Enhances Architectural Visualization Delivery by Incorporating Formal Project Management

Marshall Reiss, certified in project management, joins Pixelweave 3D as project director and managing partner for the full-service 3D studio specializing in architectural visualization.

Greensboro, NC (PRWEB) October 21, 2007 -- Pixelweave 3D announced today that Marshall Reiss has joined the full-service 3D visualization company as project director and managing partner. Reiss, PMI-certified in project management, will oversee all 3D projects, ensuring that Pixelweave clients consistently receive top quality deliverables on time and on budget.

"We are honored to have Marshall join our team," said Mark Bradshaw, founding partner of Pixelweave 3D. "Our strategic goal is to provide clients superior service by delivering on schedule with the highest quality control. Marshall's expertise will guarantee our competitive advantage in this area."

Most recently before joining Pixelweave 3D, Reiss was an IT project manager with EDS. Previously, he worked with Aon Corporation and was charged with varied responsibilities including implementation management, project management and process improvement. Prior experience includes a distinguished tenure in senior technical management, applications development and new technology architecture with AT&T. During his time with the telecom giant, Reiss established the AT&T Multimedia Lab in Greensboro, N.C.

Reiss was awarded certification from the Project Management Institute in Newtown, Penn., in February 2005. He holds a master's certificate in interactive multimedia from Georgia Institute of Technology, and he received a B.A. in mathematics with concentration in computer science from the State University of New York at Binghamton.

"I'm delighted to join Pixelweave 3D and to contribute to its continued growth and success," said Reiss. "Through my experience working with large corporations, I have developed the technical, creative and leadership skills necessary to propel the N.C. Triad's pioneering 3D studio to a nationally recognized firm. With the introduction of formal project management techniques to its results-focused and richly creative endeavors, Pixelweave is uniquely positioned to further enhance customer satisfaction."

As part of the recent expansion of the 3D visualization company, Pixelweave has also announced the relocation of its offices. Previously located in the Old Greensborough Gateway Center, the company has moved to another historic area near downtown Greensboro. The new address of Pixelweave 3D is 502 East Cornwallis, suite L-2, Greensboro, N.C. 27405.

About Pixelweave 3D
Founded in 2004, Pixelweave is a 3D visualization company based in Greensboro, N.C., and serving clients throughout the U.S. The firm specializes in photorealistic 3D renderings for various fields including architecture, commercial and residential real estate, manufacturing, advertising and marketing, government, healthcare and education. Pixelweave offers the full range of 3D visualization services including modeling, rendering, animation, photogrammetry and interactive multimedia. For more information, call Star Reedy Bradshaw at 336-333-2150 or visit Pixelweave 3D online at pixelweave.com.

If you'd like more information about this topic, or to schedule an interview with Marshall Reiss, please contact Star Reedy Bradshaw at 336 333-2150 or star @ pixelweave.com.

Posted by Industrial-Manufacturing at 03:26 AM | Comments (0)

BUILDER Magazine's October Issue Highlights the Green Aspects of the 2007 Builder's Choice Winners and Offers a Forecast for the Future of the Housing Industry.

The winning element in the Builder's Choice award competition this year was a focus on energy-efficient, sustainable design and production practices.

Washington, D.C. (PRWEB) October 21, 2007 -- Green building and the housing recession are perhaps the two most important topics in home building industry conversation in this tumultuous market, and as a leading voice in the industry, BUILDER addresses both topics in its October issue. This month marks BUILDER's 27th annual Builder's Choice Design and Planning Awards competition for the best-designed housing in the United States. All of the winning projects are on display in the October cover story, and many of them feature green and sustainable site planning, construction techniques, and products.

The Builder's Choice feature also reveals 10 new market trends, many stemming from energy-efficient, sustainable design and production practices. Some builders, for example, preserve architectural history while conserving resources; others start from scratch to create walkable communities, cutting down on residents' reliance on automobiles. But green building is not a trend, says Senior Editor Nigel Maynard.

"Green building is here to stay. Over time, I think green building methods will become an essential part of home construction because the more consumers learn about green building, the more they'll demand green building features in their homes," Maynard says. "While some green practices require more investment, many are cost-effective for both builders and buyers."

BUILDER's third installment of "Nobody's Home" queries 12 industry experts about the current housing recession and when they expect the downturn to end. The conclusion of this three-part series takes a look at where the market stands now, what factors will influence its direction, and where it is likely to end up.

"Customer perception seems to be playing a large role in the current housing recession," says Builder's Editor in Chief Denise Dersin. "However the American home buying public responds to the daily news, though, builders must continue to keep their eyes on the numbers. Sales, starts, inventory, prices -- economic forecasts of these and other metrics are crucial in determining how to best conduct their business."

Find articles on green building, the housing recession, and the winners of this year's Builder's Choice awards in BUILDER's October issue. For more BUILDER features, past BUILDER issues, and breaking news from the housing industry, visit http://www.BuilderOnline.com.

About Hanley Wood:
Hanley Wood, LLC, is the premier media and information company serving housing and construction. Through four operating divisions, the company produces award-winning magazines and Web sites, marquee trade shows and events, rich data and custom marketing solutions. The company also is North America's leading publisher of home plans. Hanley Wood Business Media (Washington, D.C.), publishes 36 award-winning residential and commercial construction titles, including BUILDER, REMODELING, CUSTOM HOME, CONCRETE CONSTRUCTION and residential architect. Hanley Wood Business Media also offers the construction industry's foremost collection of Web sites, including BUILDER ONLINE, REMODELING ONLINE, and ebuild, the comprehensive online guide to building products, as well as the largest collection of house plans online through eplans.com and Dream Home Source.

Founded in 1976, Hanley Wood is a $250 million company owned by affiliates of JPMorgan Partners, LLC. CCMP Capital Advisors manages the Hanley Wood investment for JPMorgan Partners.

Posted by Industrial-Manufacturing at 03:26 AM | Comments (0)

Welding Employment and Education Site to Help Address Skilled Welder Shortage

A new site designed to give a boost to the welding industry has been officially launched. HireWelders.com will offer worldwide information about welding jobs and welding education in an effort to develop a stronger link between the two. Created to help ease the difficulty in finding qualified welders, the site promises to offer those seeking welders, welding jobs, welding education, or welding students a single place to find what they need.

(PRWEB) October 21, 2007 -- A new site designed to give a boost to the welding industry has been officially launched. HireWelders.com will offer worldwide information about welding jobs and welding education in an effort to develop a stronger link between the two. Created to help ease the difficulty in finding qualified welders, the site promises to offer those seeking welders, welding jobs, welding education, or welding students a single place to find what they need.

"With the shortage of skilled welders, the welding community needs a site like this to bring everyone together," states site developer and hobby welder, Shane Turner. According to American Welding Society (AWS) statistics, there will be a projected shortfall of skilled welders in the U.S. of more than 200,000 by the year 2010.

Employers will recognize immediately that this site has been designed with them in mind. With the ability to search for candidates who are proficient in the welding process or processes they need, have a work authorization for a particular country, or even speak a particular language, employers will be able to source welders for their welding jobs with more efficiency and lower cost. They'll also have the ability to manage their vacancies, process applications, and view statistics on the openings that they list with the site. To give employers an opportunity to try it out risk free, HireWelders.com will be offering free 60-day job postings to employers for a limited time.

"Companies seeking welders will be pleasantly surprised by the tools that they have in this site. They were developed in direct conversation with people in the welding industry, and that's what makes HireWelders.com a welding job site instead of a job site with welding openings," Turner states.

"We need more individuals to get interested in welding and they need to be able to find information about welding education easily," Turner states. As a result, the site offers a free venue for educators to share information about their programs as well as an interactive map where visitors can find welding programs around the world. Welding educators are invited to submit information regarding their school including program descriptions, courses offered, photos, videos, etc. to the site.

Posted by Industrial-Manufacturing at 03:25 AM | Comments (0)

Telogis Inc. GPS Technologies to Launch OnTrack WorkForce at CTIA Expo See OnTrack WorkForce in Action at NAVTEQ Booth 615

Telogis Inc. unveils OnTrack WorkForce at the CTIA Wireless Association Conference and Expo in San Francisco. OnTrack Workforce is a wireless location-enabled application that allows businesses of all size to increase regulatory compliance, streamline operations, and improve customer service while eliminating paperwork and manual dispatch functions. WorkForce is being launched on a GPS enabled smartphone.

Irvine, CA (PRWEB) October 20, 2007 -- Telogis Inc. to unveil OnTrack WorkForce at the CTIA Wireless Association Conference and Expo in San Francisco. OnTrack Workforce is a wireless location-enabled application that allows businesses of all size to increase regulatory compliance, streamline operations, and improve customer service while eliminating paperwork and manual dispatch functions. WorkForce is being launched on a GPS enabled smartphone.

Highlights of OnTrack WorkForce include: Voice prompted turn-by-turn navigation using premium NAVTEQ® map data, an hours of service module for regulatory compliance, and real-time instant messaging. OnTrack Workforce increases regulatory compliance, streamlines operations, and improves customer service.

The navigation functionality enables drivers to route themselves to known customer locations as well as new locations entered on the fly. Stops can also be dispatched by the back office via OnTrack; Telogis' web-based fleet management application. The seamless integration of web-based and mobile applications was a natural extension of Telogis' technology portfolio.

"We listen to our customers and continue to provide them with the location enabled tools they require to make their fleet run more effectively." says Jason Koch President of OnTrack at Telogis. Telogis' real-time GPS Fleet Tracking solution helps businesses of all sizes improve productivity and enhance their operations.

For a live demonstration of OnTrack Workforce, stop by the CTIA NAVTEQ Booth #615 or call 866-835-6447 to set up a demonstration.

About Telogis:
Telogis is a Location Technology company delivering software and services through two product lines- OnTrack and GeoBase. OnTrack is a GPS Fleet Tracking Productivity Tool and Fleet Management System. GeoBase is a scalable, feature rich, easy-to-use engine that delivers core geospatial functionality in a software application. Telogis software services and products are used and distributed worldwide. To learn more about Telogis please visit www.telogis.com and to learn more about GeoBase please visit www.geobase.info.

About NAVTEQ:
NAVTEQ is a leading provider of comprehensive digital map information for automotive navigation systems, mobile navigation devices, Internet-based mapping applications, and government and business solutions. NAVTEQ creates the digital maps and map content that power navigation and location-based services solutions around the world. The Chicago-based company was founded in 1985 and has over 3,000 employees located in 168 offices in 30 countries. www.navteq.com

Posted by Industrial-Manufacturing at 03:24 AM | Comments (0)

City of Gulfport Builds State of the Art Boating Facility

The City of Gulfport, FL (located approximately 20 miles due east of Tampa) recently completed a significant marina upgrade using state of the art floating docks manufactured by Gator Dock & Marine -- a division of Crane Materials International (CMI). The new transient dock is 325 feet in length and can accommodate vessels up to 60 feet with six foot draft. Gulfport is a full service marina offering fresh water, fuel, 30 & 50 amp power, sanitary pump out, WiFi and a full service ship store.

Atlanta, GA (Vocus/PRWEB ) October 20, 2007 -- The City of Gulfport, FL (located approximately 20 miles due east of Tampa) recently completed a significant marina upgrade using state of the art floating docks manufactured by Gator Dock & Marine -- a division of Crane Materials International (CMI). The new transient dock is 325 feet in length and can accommodate vessels up to 60 feet with six foot draft. Gulfport is a full service marina offering fresh water, fuel, 30 & 50 amp power, sanitary pump out, WiFi and a full service ship store.

"We chose Gator Dock & Marine, again, because the quality of construction is unsurpassed by any other dock manufacturer," said Denis Frain, Harbormaster for the City of Gulfport. Gator built a 140 foot fuel dock which was installed in 1995. "The fuel dock has required little to no maintenance -- enduring over 12 years of service and several tropical storms and hurricanes."

Environmental concerns were also a major consideration in dock selection. The Gator Dock system installed at Gulfport has no chemically treated CCA wood, which can potentially harm the fragile marine environment. Furthermore, the pilings used to secure the dock are fully encapsulated and polymer protected to prevent marine borer attack. "We used TimberGuard pilings because conventional wood piling is quickly destroyed by marine borers and can leach chemicals into the water," said Denis. "The local Department of Environmental Protection recommends this type of protection." Denis is proud to fly the flag as a certified Clean Marina.

Installation of the floating docks was completed by Seaway Marine of St. Petersburg. "We have been working with Gator for 26 years," said Mark Kretzer, President. "The all-aluminum frames are light and durable which makes them very easy to install. Our earliest Gator projects are still performing beautifully."

Gator Dock & Marine builds the finest dock system available anywhere in the world and has for over 30 years. If your facility requires a durable, long lasting, aesthetically pleasing and environmentally friendly dock solution then Gator is the only choice.

CMI Waterfront Solutions is the new vision of waterside life. We offer a complete line of waterfront solutions including seawalls, docks, piers and gangways.

Stacy Acton
CMI Waterfront Solutions
800-256-8857 Ext 1132
770-262-0375 Cell
Sacton@cmilc.com
www.cmiwaterfront.com

Posted by Industrial-Manufacturing at 03:23 AM | Comments (0)

Keeping Up on Home Maintenance Saves Homeowners From Costly Home Improvement Disasters

With winter on the way, homeowners should take the time to prepare and protect their home for the coming weather.

Portland, Ore. (PRWEB) October 20, 2007 -- By emphasizing the importance of home maintenance, ReliableRemodeler.com, a nationwide home improvement and remodeling contractor referral service, makes sure homeowners are preparing their biggest investment for the winter and for the future.

While homeowners may scurry to get their last minute large remodeling projects done, Fall is the best season for many home maintenance projects. Routine maintenance, such as roof repairs, can help homeowners avoid pricey problems such as major roof leaks. Maintenance will also ensure the service life on major aspects of a home will last as long as possible.

To ensure homeowners know the most important fall maintenance projects ReliableRemodeler.com has compiled their top maintenance projects for fall to help them prepare their home for the season. By focusing on prevention of home related problems through routine maintenance, homeowners will be able to rest easy this season knowing their home is in top shape.

"Homeowners may be more focused on major remodeling projects since they have the most return on their investment, and make the most visible change to their home," said Eric Doebele, CEO of ReliableRemodeler.com. "However, it is vital to have basic home maintenance done to ensure that their home is energy efficient, safe, and prepared for the winter."

Other smaller projects such as adding insulation and weatherstripping windows and doors are also great home improvement projects for homeowners looking to lower their bills this winter. These tasks will not only make sure that a home stays warmer and more comfortable this winter, but homeowners will see a drop in their overall energy consumption and the amount of their energy bill.

About ReliableRemodeler.com:
ReliableRemodeler.com is a leading nationwide home improvement contractor referral service working to bring together homeowners and contractors. To date, the company has matched over 450,000 homeowners with home improvement projects to quality, local contractors. Besides homeowners, the company targets over 1.2 million home improvement and remodeling contractors in the United States, providing them access to quality home improvement leads using proprietary matching technologies.

Both homeowners looking to start a home improvement project, or contractors who want to start receiving qualified leads, can visit our website, http://www.ReliableRemodeler.com/pr

For information about this press release or about http://www.ReliableRemodeler.com/pr

Posted by Industrial-Manufacturing at 03:23 AM | Comments (0)

QualitySmith Announces the Appointment of Chad Kreutz as President

QualitySmith, Inc. announced today that, effective October 22, 2007, Chad Kreutz will be appointed President of the company. Following a brief transition period, Mr. Kreutz will assume full responsibilities from the company's founder and current President Rob Schmidt. Mr. Schmidt will remain on as CEO. Mr. Kreutz will be responsible for executing the company's national growth plan and leading the company's product innovation strategy.

Walla Walla, WA (PRWEB) October 20, 2007 -- QualitySmith, Inc. announced today that, effective October 22, 2007, Chad Kreutz will be appointed President of the company. Following a brief transition period, Mr. Kreutz will assume full responsibilities from the company's founder and current President Rob Schmidt. Mr. Schmidt will remain on as CEO. Mr. Kreutz will be responsible for executing the company's national growth plan and leading the company's product innovation strategy.

Mr. Kreutz has many years of broad based management experience. Prior to joining QualitySmith, he worked as a political consultant including the management of a U.S. Congressional campaign. He joined QualitySmith in April 2005 as director of the automotive division. In 2006, Mr. Kreutz was promoted to National Sales Director and in 2007 was promoted to Vice President of Sales. In his prior roles, he was responsible for managing sales, business development, customer service and product development. Mr. Kreutz has a B.A. in Political Science from the University of Washington.

"Chad brings tremendous vision and tenacity to QualitySmith" said Rob Schmidt, CEO. "He has a deep knowledge of web strategy and broad range of experiences in business development, business to business sales, and business to consumer sales. I have complete confidence in Chad's ability to lead QualitySmith's growth and innovation in the home improvement and auto service markets."

About QualitySmith:
Established in 2002, QualitySmith operates sites that match customers with reputable home improvement contractors nationwide in trades such as roofing, air conditioning, window replacement, and siding at http://www.qualitysmith.com The company also owns Glass.net, a website that offers an interactive one-stop-shopping experience for auto glass, helping customers find rated windshield installers at http://www.glass.net Glass.net was the first site to offer online windshield shoppers three different auto glass shop profiles and pricing on one site.

QualitySmith® and Glass.net ®, are registered trademarks of QualitySmith, Inc. All rights are reserved.

Contact:
Lance Haun
Human Resources Manager
(509) 301-9167

Posted by Industrial-Manufacturing at 03:22 AM | Comments (0)

October 19, 2007

Solar Innovations Announces the Release of the All New Conservatory Traditions Brochure and Decorative Elements Supplement

Solar Innovations, a custom manufacturer of residential and commercial conservatories, greenhouses, sunrooms, folding and sliding glass doors, windows, and screens, and more, is proud to announce the release of the all new Conservatory Traditions™ brochure and Decorative Elements supplement.

Myerstown, PA (PRWEB) October 19, 2007 -- Solar Innovations, a custom manufacturer of residential and commercial conservatories, greenhouses, sunrooms, folding and sliding glass doors, windows, and screens, and more, is proud to announce the release of the all new Conservatory Traditions™ brochure and Decorative Elements supplement.

In production for over six months, the new Solar Innovations, Conservatory Traditions™ 32 page brochure provides customers with an in-depth look at the options available from Solar, a custom conservatory manufacturer. Solar Innovations encourages customers to use their imaginations and allow the sales and drafting teams to incorporate the customers' ideas into a structure that meets their exact specifications and budget requirements.

"Solar Innovations offers free standing, double pitch, and lean-to structures in curved or straight eave options which withstand even the most brutal outdoor climate and retain a superior level of craftsmanship and detail." The thermally-enhanced aluminum system offered by Solar Innovations combined with the best of modern glass technology, proper ventilation, and shading, ensure many years of comfortable year round use. In addition, Solar Innovations' conservatories can be designed to meet virtually any structural need, including hurricane and seismic requirements.

Released on October 12th, the new 16 page Decorative Elements supplement showcases Solar Innovations' comprehensive line of decorative accessories including extruded moldings, gutters, ridge cresting, finials, appliqués, decorative corners and trim. In addition to the standard decorative accessories, Solar Innovations is able to create custom elements to meet any specific aesthetic appeal. Incorporated into any structure, Solar Innovations' accessories create exquisite detail that previously was only available in all-wood conservatories.

Customers can also choose from numerous standard colors including White, Bronze, Hartford Green, Natural Clay, Black, Sandstone, and Mill finish aluminum. Clear Anodized, Dark Bronze Anodized, and custom color finishes are available for an additional charge. Copper, Stainless Steel, and simulated Lead coated Copper cladding options are available for an additional charge. Solar Innovations also offers a large selection of glazing options, including some of the highest performance combinations available.

Solar Innovations' conservatories are available in all-aluminum and aluminum exterior/wood interior options including solid Mahogany or laminates of Southern Yellow Pine, Western Red Cedar, and Douglas Fir. Other woods, like Redwood, Cherry, or Spanish Cedar, can be integrated upon request. The advanced design of our aluminum glazing system isolates the moisture from the wood, preventing water damage. The virtually maintenance-free aluminum exterior protects the delicate interior wood from environmental extremes.

Dealers, contractors, and home owners can obtain their copy of the Conservatory Traditions™ brochure and Decorative Elements supplement by contacting the Marketing Department at 800-618-0669.

Posted by Industrial-Manufacturing at 06:19 AM | Comments (0)

HOK Chairman Bill Valentine Named 'Outstanding Business Executive of the Year' by American Public Transportation Association

APTA honor recognizes architect's positive influence on innovative transit and transit-oriented design in the U.S.

San Francisco, CA (Vocus/PRWEB ) October 19, 2007 -- In recognition of his commitment to designing innovative transit facilities and encouraging transit through sustainable design leadership, HOK Chairman Bill Valentine, FAIA, LEED® AP, accepted the 2007 "Outstanding Business Executive" Award at the American Public Transportation Association (APTA)'s Annual Meeting in Charlotte, N.C., on October 9.

APTA's award honors outstanding contributions made by an executive who has taken a leadership role in improving his or her company and in making significant contributions to the community and public transportation. The honor is awarded to chief executive officers or board members of APTA business members or companies that have contributed to advancing public transit.

Valentine joined HOK in 1962 and is based in the firm's San Francisco office. Valentine’s passion for public transportation is reflected in HOK’s long list of mixed-use, transit-oriented development projects. Whenever possible, Valentine pushes to make transit appealing and convenient as an integral part of a project’s design solution. He believes – and has proven through his distinguished architectural career – that each transit-first project and sustainable transit facility design creates an incremental step toward preserving our environment and improving people’s lives

"This award is a fitting tribute to a man who has had a profound positive impact on leading our firm and the entire industry toward environmentally responsible design," says HOK CEO Patrick MacLeamy.

HOK's notable transit and transit-oriented development projects include the Santa Clarita Transit Maintenance Facility in Santa Clarita, Calif., (LEED Gold); Delta Air Lines Terminal A at Logan International Airport in Boston (LEED Certified); Indianapolis International Airport Midfield Terminal in Indianapolis (under construction and pursuing LEED certification); Houston METRO Light Rail System urban and station design; Dallas Area Rapid Transit Light Rail design standards; St. George Intermodal Terminal in Staten Island, N.Y.; Transbay Transit Center plan and design guidelines in San Francisco; Bay Meadows Mixed-Use Development in San Mateo, Calif.; the Franchise Tax Board State Office Building in Sacramento, Calif. (transit-first); and VERITAS' headquarters in Mountain View, Calif. (transit-first).

Valentine earned a Bachelor of Architecture degree from North Carolina State University and a Master of Architecture degree from Harvard University. A Fellow of the American Institute of Architects, he is a frequent speaker and author on sustainable design topics.

HOK is a global architectural firm that specializes in planning, design and delivery solutions for buildings and communities. Through its collaborative network of 26 offices worldwide, the firm serves diverse clients within the corporate, commercial, public and institutional markets. HOK is committed to developing resources and expertise to help lead the world toward sustainable communities and building environments. Founded in 1955, the firm's expertise includes architecture, engineering, interiors, planning, lighting, graphics, facilities planning and assessment and construction services.

Contact:
Mike Plotnick
314.754.4315
mike.plotnick @ hok.com
www.hok.com

Posted by Industrial-Manufacturing at 06:18 AM | Comments (0)

Wrecking Corp Begins Demolition of Coppin State University Lutheran Hospital

Wrecking Corporation of Americahas begun demolition work on the former Coppin State University Lutheran Hospital in Baltimore, Maryland. Razing the hospital, which includes seven buildings consisting of approximately 200,000 square feet, is scheduled for completion in February 2008.

Alexandria, VA (PRWEB) October 19, 2007 -- Wrecking Corporation of America, which has provided demolition services to major industrial, commercial, and government clients in the Washington DC, Virginia, and Maryland metropolitan areas for more than 30 years, has begun demolition work on the former Coppin State University Lutheran Hospital in Baltimore, Maryland.

"We have been razing institutional sites for 30 years, including a number of hospital complexes," said Terry Anderson, Wrecking Corp executive vice president. "We recently took down the old Columbia Hospital for Women, a building about the same age as the oldest Lutheran Hospital building, and we are very familiar with the complexities of extremely old facilities. We've already begun abatement of asbestos and lead in the buildings."

Razing the hospital, which includes seven buildings consisting of approximately 200,000 square feet, is scheduled for completion in February 2008. Abatement has been subcontracted to Hudak's Construction Services. Wrecking Corp also will perform on-site recycling and regarding with crushed concrete.

The Lutheran Hospital site has been vacant for more than 15 years and was purchased by Coppin State University in 2003 for purposes of expansion.

About Wrecking Corporation of America:
Wrecking Corporation of America took down its first downtown DC building 30 years ago. Headquartered in Alexandria, VA, Wrecking Corp. has worked on hundreds of high-profile projects downtown and in the surrounding metropolitan areas, including 1900 Pennsylvania Avenue and the former Washington Convention Center. Wrecking Corp. specializes in the challenges of demolition and excavation on high-profile commercial projects and cramped urban sites as well as sprawling multi-building complexes. For more information, visit the Wrecking Corp. web site at www.wreckingcorp.com or call 703.823.3850.

Posted by Industrial-Manufacturing at 06:18 AM | Comments (0)

Crane™ 1000 Series Revolving Doors Provide Quick, Economic Solutions

Crane Revolving Doors, a division of DORMA Entrance Systems introduces the Crane 1000 Series revolving door. The 1000 Series is a perfect solution for budget conscious projects that call for the look, function and energy savings of a revolving door.

Lake Bluff, Ill. (PRWEB) October 19, 2007 -- Crane Revolving Doors (www.dorma-usa.com), a division of DORMA Entrance Systems introduces the Crane 1000 Series revolving door. The 1000 Series is a perfect solution for budget conscious projects that call for the look, function and energy savings of a revolving door.

Fabricated with .125" thick rigid aluminum construction, each component of the Crane 1000 Series is carefully cut and fitted by experienced iron workers and craftsmen. All exposed surfaces are mechanically cleaned and finished with one of several options: clear anodized, dark bronze, custom anodized, or painted. Another benefit of this series is the expedited production lead-time for jobs with a fast-tracked completion date.

Managed by a 100:1 precision-geared manual speed control, the 1000 Series comes in three sizes: an 8' outside diameter, a 7' inside diameter, as well as a 6'6" inside diameter. The 7/16" clear or tinted glass enclosure can be specified from 7'-9' feet in height. Standard push bars are available as a 1/2" by 1-1/2" rectangular bar or 1" diameter round bar. All push bars are created in the same material and finish as the door for seamless aesthetic appeal. Optional ceiling lights, consisting of a translucent lens and snap-in trim ring that matches the door's finish, can be flush-mounted in non-glass ceilings.

For safety and security, Crane's patented Bookfold Collapse Lock provides emergency egress, however will not release during excessive winds or stack conditions. The pressure to engage the bookfold mechanism is adjustable to meet local conditions. The bookfold mechanism features machined chill-cast bronze discs and hangers finished to match the door.

In addition to the Crane 1000 Series, Crane Revolving Doors provides a complete revolving door portfolio including 2000 Series semi-custom doors, 3000 Series fully custom doors, 4000 Series all-glass doors. Crane also offers security revolving doors, large diameter revolving doors and revolving door rehab kits to meet all revolving door project needs.

For more information or a product brochure, call DORMA at 1-800-942-7263 or visit www.cranedoor.com.

About DORMA Group North America

DORMA Group North America manufactures and markets a wide range of products for the architectural openings industry, with a particular focus on commercial and institutional openings. Part of The DORMA Group worldwide, DORMA Group North America comprises DORMA Architectural Hardware, DORMA Glas, Modernfold, DORMA Canada, DORMA Mexico, and DORMA Entrance Systems -- which markets products and services under the DORMA Automatics, Crane Revolving Door and Carolina Door Controls brands.

DORMA Group North America offerings include safety and security products, locks, door closers, exit devices, glass hardware and patch fittings, sliding and swinging automatic doors, revolving doors and operable partitions.

Posted by Industrial-Manufacturing at 06:17 AM | Comments (0)

SmartBrief, Inc. Announces Addition of Job Listings to Popular Daily Newsletters for Executives and Top Level Professionals

SmartBrief, Inc. announced today the addition of job listings to its popular online daily newsletters in the following industries: Aerospace, Cable and Broadband, Construction, Education, Food service, Gay & Lesbian Leadership, Health Information Technology, Interactive Advertising, Regulatory / Medical Affairs, Retail, Retail Pharmacy and Wholesale Distribution.

Washington, DC (PRWEB) October 18, 2007 -- Washington DC-based SmartBrief, Inc. announced today the addition of job listings to its popular online daily newsletters in the following industries: Aerospace, Cable and Broadband, Construction, Education, Food service, Gay & Lesbian Leadership, Health Information Technology, Interactive Advertising, Regulatory / Medical Affairs, Retail, Retail Pharmacy and Wholesale Distribution.

The addition of job listings to the daily informative news briefs expands both the range and depth of services previously offered by the industry-leading site to executives and employers. The company also announced that it will soon launch job listings in additional newsletters focused on the business and Healthcare industries.

SmartBrief has become the leading publisher in customized e-mail newsletters and maintains partnerships with leading trade associations, professional societies and corporations. More than 1 million professionals in 18 industries rely on SmartBrief every day to save them time and keep them informed of essential industry news.

Unlike other online job services, SmartBrief offers an alternative to the typical job search for both candidates and recruiters. SmartBrief.com job listings help solve two of the biggest concerns in the online recruiting industry: anonymity and the need for passive job seekers.

Anonymity - One of the major concerns for Job seekers, both passive and active, remains the importance of staying anonymous during their job search. SmartBrief's job listings allow jobseekers to anonymously search jobs while reading industry news in their daily newsletters. Potential candidates have the ability to learn of open positions before they even begin their job search without anyone knowing they are in the market for a new career. Interested candidates reply to positions that fit their background and skill levels.

Passive Job Seekers - SmartBrief job listings helps employers and recruiters get their job openings in front of potential job seekers not typically listed on job boards or being called by recruiters. Many of these job seekers are not actively looking for a new position but are simply reading industry news. SmartBrief readers are interested in learning more advancing their knowledge of the industry as well as their career.

In addition to its superior job services, Smartbrief.com also provides a wealth of industry news, knowledge, and up-to-date information covering a wide range of industries.

To request interviews or learn more about SmartBrief Job and SmartBrief.com, please visit www.smartbrief.com/industryjobs/ or call Laurie Pollak at 202-737-5500 ext 248.

Contact:
Laurie Pollak
http://www.smartbrief.com/industryjobs/
Phone: 202-737-5500 ext 248
jobhelp(at)smartbrief.com

Posted by Industrial-Manufacturing at 06:17 AM | Comments (0)

Bidders' Last Chance to Own a 'Desert Oasis' Resort Home in Bullhead City via Online Auction

After successfully selling all the homes in two previous auctions in Bullhead City, Arizona earlier this year, Freedom Realty Exchange is auctioning nineteen more new single-family homes in a final closeout of inventory. With nearly three weeks until the bid deadline, eager bidders are racing to take advantage of this once-in-a-lifetime opportunity to purchase a new home near the Colorado River in an online auction.

Newport Beach, CA (PRWEB) October 18, 2007 -- With nearly three weeks until the bid deadline, eager bidders are rushing to take advantage of the opportunity to purchase a new home at an incredible price in Bullhead City, Arizona, via an online auction.

After successfully selling all the homes in two previous auctions earlier this year, this current auction represents a final closeout of inventory and is the last chance for buyers to own property in one of two premier gated communities: Laughlin Ranch and Talon Pointe.

Freedom Realty Exchange (FRE), an online real estate auction marketing company and a member of the LFC Group of Companies, is currently auctioning these resort-style single-family homes on FRE.com, for a fraction of their estimated value. Three of the models, two of which are fully furnished, with minimum bids starting at $1, are being sold as absolute, regardless of price, to the highest bidder.

Furthermore, special financing programs are available on the homes in this auction through FRE's preferred lender. When combined with the recent cut in the Federal interest rate, and the subsequent decrease in the prime lending rate, this auction is a rare opportunity for buyers, who have been contemplating purchasing a vacation or retirement home, to get a great deal.

Bullhead City is situated across the Colorado River from Laughlin, Nevada and just a short drive from Lake Mead, Lake Mohave and Lake Havasu. Located off of Bullhead Parkway and Highway 95, Laughlin Ranch is a master-planned golf community boasting an award-winning 18-hole golf course and clubhouse, a luxurious day spa and salon, a fitness center and excellent dining.

Similarly, Talon Pointe at Desert Shores, located along Bullhead Parkway, is a prestigious gated community with panoramic views of the beautiful Black Mountains. For the adventurer, the Bullhead City area offers a variety of outdoor recreation including hiking and biking on nearby trails, boating on the Colorado River and the surrounding lakes, and gambling and nightlife in the Laughlin casinos on the Nevada side of the river.

With the bid deadline of November 8, 2007 just around the corner, prospective buyers are urged to visit www.FRE.com/166R8 and register to bid in this "must sell" auction event.

Freedom Realty Exchange - part of the LFC Group of Companies For over 30 years, the LFC Group of Companies have served numerous Fortunate 500 companies, real estate developers, investors, financial institutions and government agencies by auction-marketing thousands of commercial, industrial, land and residential properties with an aggregate value well in excess of $5 billion.

Posted by Industrial-Manufacturing at 06:16 AM | Comments (0)

19-Year-Old Shows Spanish Workers How to Speak English on The Job -- in Seconds

UCSD student-turned-entrepreneur develops effective phonetic-based system to pay her way through college.

San Diego, CA (PRWEB) October 18, 2007 -- During this summer's heated debate over immigration, guest worker programs, and language differences, university student Katie Pross was working on her idea: applying what she learned as a high-school honors-student, including honors-Spanish, she knew she could develop a phonetic system that would teach Spanish-speaking workers how to speak English on the job in seconds.

If her idea worked, these entry-level workers would integrate better into the US workforce, thus improving overall productivity and, she would earn enough money to pay for her education at UCSD.

The goal was to keep it simple. The minimum needed to communicate a thought is just a few key words or phrases. But it was vital to know which words worked best. Then, with the proper phonetic equivalent, the Spanish-speaker could be speaking English without previous knowledge of the language.

Teaming-up with her mom, they selected, researched, then listed thousands of words and terms specific to construction, home maintenance, landscaping, gardening, housekeeping, food service, and basic business. Once the list was done, they painstakingly developed the phonetic equivalents for each entry. For example:

Tengo una licencia de manejo. » I have a driver's license. » ''ai jav a DRAI-vers LAI-sens''

Puedo trabajar los fines de semana. » I can work weekends. » ''ai kan uork UIK-ends''

Esto es peligroso. » This is dangerous. » ''dis is DEIN-cher-as''

After the finished manuscript was reviewed by Spanish language experts, they tested it in the real world. They gave copies to local workers who spoke very little English. The results were far better than expected: after only a try or two, these workers were actually speaking English.

Encouraged by their efforts, the two created a second book that quickly shows English-speaking employers how to speak Spanish on the job.

Katie's mom Sharon: "In today's work environment, it's imperative that you can speak at least a little of the language. Our book has the key words and phrases that can make a project go smoother because there are fewer misunderstandings."

Using the techniques born from the first book, the two listed the most useful work phrases for the common trades, translated them to the Spanish, and then gave the phonetic equivalent. For example:

Do you have papers to work? » ¿Tiene papeles para trabajar? » ''tee-EH-neh pah-PEH-les PAH-rah trah-bah-HAR''

Do you have references? » ¿Tiene referencias? » ''tee-EH-neh reh-feh-ren-see-AHS''

Can I pay you with a check? » ¿Puedo pagarle con un cheque? » ''PWEH-doh pah-GAR-leh kohn oon cheh-KEH''

The new 208-page books are titled "Speak English on the Job" (''Hable Inglés en el Trabajo'') and ''Speak Spanish on the Job.'' They cost $9.95 each. Thousands have already sold. The very first customer was the California State Department of Education, followed by Texas, and Florida. Target, Amazon, and Barnes & Noble offer them online. And now national construction and hardware chains are beginning to carry them in their stores.

Posted by Industrial-Manufacturing at 06:14 AM | Comments (0)

Un-Faux-gettable Wall Finishes Make Their Way in Homes

New section on faux finishes offers detailed information on the growing popularity of these decorative finishes. The Concrete Network recently launched this new section highlighting a definition faux finishing, featured faux projects, photos and more.

Yucaipa, CA (PRWEB) October 18, 2007 -- Designing and creating with faux finish techniques provides many options for making plain surfaces much more intriguing and appealing. These techniques offer a wide variety of possibilities for creating unique surfaces. Perfect for interior and exterior application including vertical walls or floors, faux finishes continue to grow in popularity.

The Concrete Network Website has recently launched a new section that explores the highly innovative technique that is faux finishing. From a detailed description of what the application entails, the website also gives insight on which surfaces can receive a faux finished design, and highlights different faux projects from around the country.

Faux (pronounced 'foh') means imitation or fake.

"A faux finish is made to look like something else," explains Christina Lask, owner of Faux Designs in Albany, Ore. "It's using color and application techniques to make something look like fake stone, fake marble, or fake wood."

Faux finishing techniques have recently started to merge with concrete. A faux finish can be applied to nearly any surface. With concrete, the two most popular surfaces include walls and floors. Carving and stamping with faux finish coloring techniques can make walls look like real stone, while finishes created by using stains, dyes and other coloring methods can create unique faux finished concrete rugs, and detailed patterns on floors.

Read more about how a unique, faux finished concrete rug was created to complete a backyard patio.

Established in 1999, The Concrete Network's purpose is to educate consumers, builders, and contractors on popular decorative techniques and applications. These include stamped concrete, stained concrete floors, concrete countertops, polished concrete, and much more. In July 2007 The Concrete Network Website had over 1.3 million visitors researching decorative concrete.

The site excels at connecting buyers with local contractors in their area through its Find-A-Contractor service. The service provides visitors with a list of decorative concrete contractors throughout the U.S. and Canada, and is fully searchable by 23 types of decorative concrete work and 202 regional areas throughout North America.

Article photos courtesy of Progressive Concrete Works Inc. Attached photos courtesy of Flex-C-Ment.

Posted by Industrial-Manufacturing at 06:13 AM | Comments (0)

The Élan Collection Agrees To Purchase Prime Real Estate Site at Tamarack Resort in Idaho

Élan Tamarack is projected to break ground in 2008

Tamarack, ID (Vocus/PRWEB ) October 18, 2007 -- Tamarack Resort continues to show strong momentum in the destination resort market; highlighted by the signing of a letter of intent by luxury developer The Élan Collection to purchase a prime resort pad site.

The site showcases one of the unique elements that continues to drive demand at America’s newest all-season destination—rare slopeside ski-in/ski-out real estate.

Élan Collection LLC — led by well-known industry veterans David M. Disick (Park City, Utah), and Don and Andrew Pitarre (Santa Barbara, California) — has entered into an agreement to purchase land on the north end of Tamarack’s Village Plaza for more than $17.2 million.

Élan Tamarack is envisioned as a Private Residence Club comprised of 60 condominium residences. The development is situated on a snowfront knoll just above the Tamarack

Express lift, providing the ultimate in ski-in/ski-out access. These luxury properties combine a fractional ownership structure with club-level services and amenities.

The Élan Collection will be distinctive in the luxury second-home ownership field, combining the fractional fee-simple concept of Private Residence Clubs with the flexibility and variety offered by Destination Clubs. Key to the attraction of Élan properties will be a high-caliber lifestyle club incorporating benefits and amenities such as a private wine label, exclusive Élan jewelry and clothing, lifestyle concierge, and Harley Davidson motorcycles for touring Idaho’s Payette River Mountains and the surrounding countryside.

Élan co-founder David Disick is considered a pioneer in the Private Residence Club market, having developed the iconic Franz Klammer Lodge in Telluride, Colorado.

“The driving principles in my work have been to craft pleasure into people’s lives, and to do everything, always, with quality,” says Disick. “In choosing Tamarack Resort for Élan’s newest Residence Club, we were attracted by the quality of life offered here - the result of spectacular all-season recreation and the boutique nature of the development.”

“David is a true innovator in this market segment, and is respected nationally for his knowledge of the business and operational elements essential for a successful Private Residence Club,” says Jean-Pierre Boespflug, Tamarack CEO. “By bringing the Élan Collection to Tamarack, we are seeing yet another validation from leaders in our industry that living and playing in the Payette River Mountains provides a unique experience – one that is in high demand among second-home buyers.”

Élan Tamarack is projected to break ground in 2008, and will be designed by OZ Architecture, whose previous work has involved projects for The Ritz Carlton, The Broadmoor, Westin Hotels and Resorts, and Exclusive Resorts.

About Élan Collection LLC
The Élan Collection is envisioned as a portfolio of Private Residence Clubs (PRC) in signature destinations located throughout the U.S. Led by principals David M. Disick, Don Pitarre and Andrew Pitarre, the Élan Collection brings together individual fractional real estate ownership of elegant properties, combined with the freedom and flexibility of multiple vacation residences in the Élan network. David Disick, an innovator in this market segment, has been referred to as ''personally a brand in this industry'' conducting ''pioneering work in the Private Residence Club Market, essential in establishing the Private Residence Club as a nationally recognized product, and helping establish the prominence of that segment in vacation ownership generally.''

About Tamarack Resort
Tamarack Resort, the first all-season resort to open in the U.S. in more than two decades, has received national attention for its world-class mountain for skiing, hiking and mountain biking; Osprey Meadows, a Robert Trent Jones, Jr., signature golf course named America’s Best New Course in its category for 2006 by Golf Digest; and beautiful Lake Cascade, ideal for swimming, sailing, fishing, sea kayaking, and boating. A key element of the Tamarack community is The Club at Tamarack for homeowners, their families and guests. Nestled in Idaho’s Payette River Mountains, Tamarack is a luxury boutique resort with a variety of lodging options all within walking distance of the four-season amenities. Call 877.TAM.RESORT or visit www.tamarackidaho.com for more information about Tamarack Resort.

Posted by Industrial-Manufacturing at 06:13 AM | Comments (0)

New CRM Service: Customer Revenue Transitions

Q4 Sales, LLC today introduced a new CRM service called Customer Revenue Transitions

(PRWEB) October 18, 2007 -- Q4 Sales, LLC (www.q4sales.com) today introduced a new CRM service called Customer Revenue Transitions that looks at how a company's best customers move (and spend) over time and what it means to the bottom line.

"We have licensed a successful software tool that quantifies market opportunity and identifies key segments by value," said TJ McCue, president of Q4 Sales, LLC.

Many companies talk about the Pareto Principle - the famous 80/20 rule, but few really know which customers spend the most and how that changes over time. The changes may signal a need to change marketing spending accordingly.

"We are also finding interest by our clients in 'Benchmarking Clubs' where we have companies in the same industry, but noncompetitive geographic markets, who want to aggregate customer profiles and find that 'best customer'. Customer Revenue Transitions does that. And it is a lot of fun because we learn things that each company can use to grow its business," said McCue.

Customer Revenue Transitions is an affordable service for the SME space starting at $2,200.00 for a basic assessment. It can be completed in as little as two to three weeks.

Q4 Sales, LLC is a sales and business development company with software-as-a-service clients in sales performance management, web hosting, and social media aggregation.

For more info:
www.q4sales.com/quantify
TJ McCue
quantify@q4sales.com
425-503-3577

Resellers and partners interested in revenue-sharing opportunities should go to: www.q4sales.com/quantify/partners

Posted by Industrial-Manufacturing at 06:12 AM | Comments (0)

Spacesaver Dealer McMurray Stern Awarded the Los Angeles County Department of Public Social Services Storage Solutions Contract

Spacesaver Dealer McMurray Stern Awarded the Los Angeles County Department of Public Social Services Storage Solutions Contract Multiple High Density Mobile Systems Slated For The Vermont Manchester Administration Building

Los Angeles, CA (PRWEB) October 18, 2007 -- McCarthy Construction has awarded their storage solution contract for the Los Angeles County Department of Social Services Vermont Manchester Administration Building to McMurray Stern, the exclusive Spacesaver Area Contractor for the Greater Los Angeles, Riverside, Orange County and Central Coast Areas. Multiple storage solutions, on multiple floors within the administration building have been designed providing more than three miles of storage.

"By selecting to install Spacesaver mobile systems, The Department of Public Social Services saved an impressive 4,000 square feet compared to conventional storage shelving," said Matt Denburg, President of McMurray Stern. "In addition, McMurray Stern was able to meet McCarthy Construction's stringent time schedule because of our in-house factory trained crew."

The new administration building serves as a catalyst project for the 163-acre Vermont/Manchester Recovery Redevelopment Project. It is one of several redevelopment projects formed in response to the civil unrest of 1992. The Project Area generally encompasses the portions of Vermont Avenue between 79th and 89th streets, and Manchester Avenue between Van Ness Avenue and the Harbor Freeway. The four-story, Class A administration building will consist of 220,000 square feet of office space, a 6,000-square-foot employee child-care center, a 7,500-square-foot outdoor childcare play area and 4,000 square feet of retail space.

The Department of Public Social Services (DPSS) serves an ethnically and culturally diverse community through programs designed to both alleviate hardship and promote health, personal responsibility, and economic independence. The department's mission includes statements such as; 'We believe that we can help those we serve to enhance the quality of their lives, provide for themselves and their families, and make positive contributions to the community'. More information about The Department of Public Social Services can be found on their website at: http://www.ladpss.org

About McMurray Stern
As a 27 year strong company founded in 1980, McMurray Stern is the leading source of design and build solutions for filing and storage systems in Southern California. They have been the exclusive Southern California Area Contractor for Spacesaver Corporation since inception, and have continued their relationship with Spacesaver with no interruptions. This significant milestone places McMurray Stern in an elite group of providers who have successfully improved the way business offices, libraries, healthcare facilities, schools, museums, justice facilities, and industrial facilities manage filing and storage operations. Some of their service offerings include; structural evaluations and calculations, cost analysis, budgetary evaluations, consulting design services, relocation planning and coordination, and document conversions, file tracking and imaging application implementation. More information can be found on their website: www.mcmurraystern.com, or by contacting them directly at 562.623.3000.

Posted by Industrial-Manufacturing at 06:11 AM | Comments (0)

Locale Launches Redesigned Network Of Real Estate Sites In Exceptional Places

Locale's redesigned Web sites give real estate shoppers the information they need to find lifestyle real estate in exceptional places to live and realtors the tools they need to reach buyers.

Jackson Hole, WY (PRWEB) October 18, 2007 -- Locale.com announced today the launch of its redesigned network of Web sites featuring lifestyle real estate in exceptional places to live. Knowing that more than 80 percent of real estate buyers now conduct their initial research online, Locale aims to enhance and aid in the real estate information gathering process for those looking to relocate to "blue-chip" communities, while improving conversion rates for advertisers.

"We know that people searching for real estate have moved online and that the Internet is the most effective medium for those in the market," said Latham Jenkins, founder and president of Circumerro in Jackson Hole, Wyoming, and publisher of Locale. "Success online requires you to marry your listings with contextual content about the lifestyle, specifying what the neighborhood and region offers to prospective buyers."

Locale has incorporated the latest Internet technology and best practices into its sites, including:

Blogs authored by local real estate industry experts.
Videos featuring properties, agents, agencies and regions.
Vastly expanded content about each locale.
Larger, standardized banner ads with less competition on each page, resulting in greater per-ad impact.

Knowing that transparency of information is paramount with today's buyers, Locale increases the "deal flow" between buyers and sellers by giving buyers what they need to make informed decisions.

"It is a simple strategy," continued Jenkins, "most Internet users start their online experience with a search engine, where all of our Locales have top rankings. The users then enter the Locale site, where we sell them on the lifestyle benefits of that locale through insightful, informative and locally produced content. We then help them choose a neighborhood or region based on their preferences and show them the available inventory for that particular area," said Jenkins.

Locale offers many advertiser benefits. By achieving top search engine rankings, Locale drives real estate-specific traffic into each marketplace where listings are previewed by a highly targeted audience of prospective buyers. Locale provides realtors with an inexpensive, customizable Internet marketing campaign through a highly qualified advertising platform.

Locale has partnered with top national brands for real estate search and is garnering increased exposure for its advertisers' listings through New York Times and Wall Street Journal. Locale listings are also syndicated through Google Base, Trulia and Oodle.

Locale is your network of lifestyle real estate in exceptional places to live. We gather premium, "blue chip" locales, known for their attractive lifestyle amenities and a strong real estate market. Locale provides deep, rich local content along with informative real estate listing and helpful online tools to help prospective homebuyers make an informed real estate decision and realtors reach a targeted, qualified audience.

Locale invites you to explore our network of lifestyle real estate in exceptional places to live. To find your next home, visit Locale.com. For more information about Locale or listing your property with Locale, visit www.locale.com/sales or call 307-733-8319.

Search for Lifestyle Real Estate in Exceptional Places to Live
LocaleBeaufort.com
LocaleCharleston.com
LocaleDaufuskie.com
LocaleHiltonHead.com
LocaleJacksonHole.com
LocaleSavannah.com
LocaleLowcountry.com
WesternRanches.locale.com

Posted by Industrial-Manufacturing at 06:11 AM | Comments (0)

HBH Gas Systems Announces Central Propane Tank Installation at Fort Worth, Texas Development on Eagle Mountain Lake

Ferrellgas has installed a 30,000 gallon propane tank contracted by HBH Gas Systems as part of the Central Propane Distribution System that will fuel The Resort at Eagle Mountain Lake, a golf course and clubhouse community west of Fort Worth, Texas.

Austin, TX (PRWEB) October 18, 2007 -- On Thursday, October 4, 2007, Ferrellgas installed a 30,000 gallon propane tank contracted by HBH Gas Systems as part of the Central Gas Distribution System that will fuel The Resort at Eagle Mountain Lake, a golf course and clubhouse community west of Fort Worth, Texas.

The Resort on Eagle Mountain Lake is a large primary residence and resort community located off of the natural gas grid. The Developer wanted the marketing advantages of gas supplied and operated by a large, competent company that has demonstrated sufficient capacity to serve a development of this size. The team at HBH Gas Systems has unsurpassed expertise in the implementation of systems designed to serve off-grid developments.

Central Gas Systems offer the developer the option of steering their off-grid developments away from carbon-heavy electricity toward more sustainable development fueled by gas. These systems are economical, saving homeowners about 50% on their heating bills when compared to electric heating. Moreover, a recent American Gas Association study showed that most homeowners demand the luxury of dual fuels for their cooking and heating requirements. Homeowners in The Resort at Eagle Mountain Lake will have the peace-of-mind associated with using an alternative green fuel as classified by the Clean Air Act and the Energy Policy Act. In fact, one home fueled by an HBH central gas system in lieu of electricity effectively offsets the annual carbon emissions from one average vehicle.

The Resort on Eagle Mountain Lake is a 540-acre master planned, gated, luxury residential Fort Worth golf community on the shores of Eagle Mountain Lake. The Resort boasts approximately 650 single family and condominium lots, a clubhouse, common areas, and a golf course. For the serious nature lover, there are over 40 acres of private open space with nature trails, private parks and picnic areas. Also, a private island belongs to every resident of The Resort and offers additional private beaches as well as a water park for children.

Central Gas Systems provide domestically produced propane to each individual home from a centralized tank; it is delivered, metered, billed, and consumed in a manner virtually identical to natural gas. Furthermore, these systems allow for the implementation of high efficiency gas appliances in place of low efficiency, grid-hogging, carbon-heavy electric appliances.

HBH Gas Systems has formed a strategic partnership with Ferrellgas, the nation's 2nd largest propane retailer and 17th largest energy company. Together, they provide developments located off the natural gas grid with clean burning, economical propane from centralized tanks. HBH Gas Systems oversaw the design and implementation of the system at Eagle Mountain, while Ferrellgas will own and operate the system. Together, Ferrellgas and HBH Gas Systems will make all necessary provisions for permanent underground metered propane gas service for this sustainable and environmentally-responsible community.

HBH Gas Systems specializes in the marketing, design, and implementation of fully-engineered Central Gas Distribution Systems nationwide. To obtain more information about this project or HBH Gas Systems visit www.hbhsystems.com or contact Harris Baker at 512-306-0073 or info@hbhsystems.com.

Media Contact:
Shelby Stephens
512 916 9200
shelby@wildfireaustin.com

Posted by Industrial-Manufacturing at 06:10 AM | Comments (0)

Chesapeake Homes - NC Division To Build ENERGY STAR® Qualified Homes in Bedford at Falls River

Chesapeake Homes - NC Division, today announced intentions to build in the Greenbriar Collection at Wakefield Development Company's award-winning master-planned community, Bedford at Falls River.

Raleigh, NC (PRWEB) October 18, 2007 -- Chesapeake Homes - NC Division, today announced intentions to build in the Greenbriar Collection at Wakefield Development Company's award-winning master-planned community, Bedford at Falls River.

Chesapeake Homes - NC Division will break ground in early December on 30 single-family ENERGY STAR® qualified homes. Priced from the mid-$300s with square footage ranging from 2,300 to 3,000 in six different home styles, the first homes will be completed in late spring 2008.

"We are thrilled to be building in such a successful community as Bedford at Falls River," said Paul Luck, North Carolina Division Manager for Chesapeake Homes. "As an ENERGY STAR® BUILDER PARTNER, homebuyers will benefit from living in a more energy-efficient home that is proven to be more durable and comfortable."

For more information about Chesapeake Homes - NC Division, please call 919-256-3060 or visit www.cheshomesnc.com. For more information about Bedford at Falls River's Greenbriar Collection, please contact the Welcome Center at 919.792.0100 or visit www.bedfordtradition.com.

About Chesapeake Homes - NC Division
Chesapeake Homes - NC Division is backed by Virginia-based L.M. Sandler & Sons, Inc., the largest privately-owned developer of master-planned communities in the United States and sister company to Wakefield Development Company, central North Carolina's largest developer of residential communities. Due to its success in the Hampton Road's area, Chesapeake Homes has expanded into the North Carolina market with projects in 12 Oaks, Wakefield Development Company's newest high-end master-planned community in Holly Springs, and Renaissance Park, an urban development just minutes from downtown Raleigh.

Posted by Industrial-Manufacturing at 06:10 AM | Comments (0)

Log Home Dealers Wanted: Cedar Knoll Log Homes Expanding Dealer Network

Cedar Knoll Log Homes (www.cedarknollloghomes.com), a leading Adirondack log home designer and manufacturer, announces the appointments of two new key members to its management team: Adam Bouchard, Director of Domestic Distributor Sales and Melanie Bouchard, Director of International Distributor Sales. Both joined the company in August 2007 and are responsible for developing and growing Cedar Knoll Log Homes' dealer networks.

Plattsburgh, NY (PRWEB) October 18, 2007 -- Cedar Knoll Log Homes (www.cedarknollloghomes.com), a leading Adirondack log home designer and manufacturer, announces the appointments of two new key members to its management team: Adam Bouchard, Director of Domestic Distributor Sales and Melanie Bouchard, Director of International Distributor Sales. Both joined the company in August 2007 and are responsible for developing and growing Cedar Knoll Log Homes' dealer networks.

Ron Marx, president of Cedar Knoll Log Homes, said, "I am excited to add Adam and Melanie to our management team. Interest from potential dealers and distributors has continued to grow as the Cedar Knoll Log Homes brand has become synonymous with high-quality log homes and log cabins that an average person can afford. We created these new positions to provide better service and support to our existing log home dealer network. Additionally, they will focus on creating the necessary infrastructure to meet the rising demand from log home builders, contractors and real estate brokers who want to partner with an award-winning log home manufacturer."

Adam Bouchard, Director of Domestic Distributor Sales, commented, "We have developed a three-tiered log home distributor program. Our Referral Representative Program is ideally suited for anyone who owns a Cedar Knoll Log Home or is a log home enthusiast who wants the ability to earn extra income for successfully referring buyers to Cedar Knoll Log Homes. The Independent Sales Representative Program is geared towards log home builders or contractors who want to be more actively involved in the log home purchase decision-making process with their customers. Independent reps earn a 6% commission. And finally, our Wholesale Representative Program is best suited for smaller, locally-focused lumber retailers/wholesalers who need access to quality pine and cedar log timbers to supply their local customers."

Melanie Bouchard, Director of International Distributor Sales, added, "Our International distributor programs are structured the same way to ensure we have consistency and continuity in all our distributor dealings. We have dealer training and support programs available and we provide cooperative advertising allowances for each level of participation. We feel strongly that these new log home dealer programs are among the most competitive in the log home industry. I encourage anyone who thinks this opportunity may be right for them to contact us immediately."

"It is our mission to make affordable log homes and log cabins more readily available to anyone who's ever wanted to build one. I believe these new dealer programs will not only help us accomplish our mission, but also create financially rewarding business opportunities for many log home enthusiasts," Marx concluded.

Cedar Knoll Log Homes (CK Log Homes) is a family-owned business that has been designing and manufacturing custom and kit log homes and log cabins since 1979. CK Log Homes headquarters, 20,000 square foot state-of-the-art milling facility, and a 1680 square foot beautifully appointed log home model, are situated between the Adirondack Mountains and the shores of Lake Champlain in Plattsburgh, NY. CK Log Homes uses only the finest Adirondack cedar and pine available and dries all its logs at the company's onsite kiln. Prospective log home / log cabin buyers, builders, contractors, wholesalers or dealers are encouraged to call 800-644-3564 for additional information or visit www.cedarknollloghomes.com.

Posted by Industrial-Manufacturing at 06:09 AM | Comments (0)

New accel-ET S.T.E.P. Wall System Offers Superior Insulation and Noise Control

Creating cost-effective demising walls that are both energy efficient and sound dampening in industrial structures is very difficult to do, particularly since high ceiling heights make traditional framing and insulation techniques very challenging. However, thanks to an innovative technology known as the accel-ET Steel Thermal Efficient Panel (S.T.E.P.) system that combines these processes into one step, the industry now has an effective new tool for use in climate and noise control for warehouses and factories - even with ceiling heights up to 48 feet.

(PRWEB) October 18, 2007 -- Creating cost-effective demising walls that are both energy efficient and sound dampening in industrial structures is very difficult to do, particularly since high ceiling heights make traditional framing and insulation techniques very challenging. However, thanks to an innovative technology known as the accel-ET Steel Thermal Efficient Panel (S.T.E.P.) system that combines these processes into one step, the industry now has an effective new tool for use in climate and noise control for warehouses and factories - even with ceiling heights up to 48 feet.

The accel-ET STEP system uses construction technology that takes advantage of cold formed steel framing fused with expandable polystyrene (EPS). The new technology offers excellent insulation and acoustic performance, according to Andy Claypole, president of ACCELERATEDT Building Technologies, which developed and markets the system.

"The accel-ET wall system's climate control and sound-dampening capabilities are outstanding," said Claypole. "What's more, the system makes it possible to reduce both construction costs and time schedules."

Because of these characteristics, the accel-ET STEP system is ideal for use in demising walls, such as sound-dampening walls between noisy factory operations or climate-controlled offices in factories and warehouses.

sing a proprietary production technology, the steel framing components and expandable polystyrene (EPS) are fused together to create energy efficient and strong structural insulating panels. The accel-ET system replaces traditional framing and insulation with a single, easy-to-install panel that also offers significant advantages to building owners.

For example, the superior insulating properties of expandable polystyrene produce a wall system that not only dampens sound transmission between adjoining spaces, it also provides exceptional energy efficiency.

"This combination of benefits makes the accel-ET wall system an ideal technology in many of today's most challenging applications in industrial settings " said Claypole, adding that the energy-saving advantages of the accel-E wall panel system are also an extremely important consideration.

"Because of the EPS panels' superior insulating properties, building owners can realize significant reductions in both heating and cooling costs," he said. In addition, accel-E panels are made from recycled materials and are also 100 percent recyclable.

Because of these environmentally friendly characteristics, accel-ET panels contribute points toward qualifying for the U.S. Green Building Council's LEED® rating system, the national benchmark for high performance green buildings.

Panels can be any height up to 48 feet. Openings can be precut for quick on-site installation, and open cavities on the panel interiors offer space for electrical and plumbing components. The simple installation process also shortens the construction cycle, and enables contractors to reduce both the size and required skill levels of their on-site construction crews.

"The accel-ET system is a fast building technology that not only offers superior acoustic performance, it also provides a stronger, more energy-efficient wall that is cost-effective to build and maintain," Claypole concluded.

ACCELLERATED Building Technologies, LLC, was formed by two leading building materials manufacturers, combining the talent, resources and knowledge of Dietrich Metal Framing and NOVA Chemicals. The company draws on NOVA Chemicals' extensive experience in expandable polystyrene (EPS) technology, and the cold-formed steel framing expertise of Dietrich Metal Framing, a Worthington Industries Company. For more information, contact Andy Claypole, president, or Jeff Peskowitz, director of marketing, at 412-490-5037; or visit the company's Web site at http://www.accbt.com

Posted by Industrial-Manufacturing at 06:09 AM | Comments (0)

Data-Basics Announces Tablet PC Giveaway to Help Firms 'Get the BIG Picture'

Drawing to highlight the hardware behind TechAnywhere wireless field service software.

Cleveland, OH (PRWEB) October 18, 2007 -- Data-Basics, a leading provider of management software solutions to service, construction and facilities management firms, today announced its "Get the BIG Picture" giveaway for a free tablet PC. By simply viewing a demonstration of TechAnywhere, Data-Basics' wireless field service software optimized for tablet PC devices, a visitor's name will be entered into the drawing.

The "Get the BIG Picture" Giveaway
Since TechAnywhere wireless field service software and the tablet PC is the perfect pairing of unique wireless field service software and cutting-edge hardware, Data-Basics is giving away a free tablet PC (an $800 US value).

Entrants can visit www.databasics.com/contest or call 1-800-837-7574 to sign up for a demonstration of TechAnywhere software, along with SAM Pro Enterprise service management software. Once the demo is complete, visitors will be entered in the running for a Toshiba tablet PC. The random drawing is scheduled to take place on December 2, 2007. Official contest rules are posted at www.databasics.com.

Why Tablet PCs?
Through a unique interface, TechAnywhere software for tablet PC allows technicians to electronically fill out job tickets as they presently do: with a pen (also called a stylus) and on a form designed to look like the job tickets currently used. TechAnywhere software is the only solution available that accurately emulates the paper work orders that techs are already used to.

"Choosing to optimize TechAnywhere for tablet PCs really freed up Data-Basics," said Tim Carcione, senior product engineer. "Since we weren't limited to the three-inch screens found on PDA-style devices, we could avoid complicated navigation and menu systems."

The result is software with a smaller learning curve, leading to decreased deployment time and quicker adoption by a firm's mobile workforce. And since tablets are fully functional PCs, additional software such as an office productivity suite or an estimating package can also run alongside TechAnywhere.

Why TechAnywhere?
TechAnywhere wireless software is a comprehensive field service solution that allows technicians to update assigned work orders, access equipment history, check inventory, capture equipment metrics, add parts and labor, make recommendations and more. With technicians filling
out more information in the field - even entering time while on site - firms that use TechAnywhere reduce back office data entry and realize measurable cost savings.

Furthermore, TechAnywhere is fully integrated with SAM Pro Enterprise, a complete dispatching, accounting and service management software solution. Since the two software packages work seamlessly, work orders that are updated in the field using TechAnywhere will automatically update SAM Pro Enterprise's database back at the office. TechAnywhere is compatible with BlackBerry devices, ideal for users concerned with the size of a tablet PC. Firms with techs needing ultra-portable devices can access TechAnywhere on RIM's BlackBerry platform.

About Data Basics
As a software provider for more than 30 years, Data-Basics (www.databasics.com) has helped hundreds of service, construction and facilities firms streamline and improve their business through technology. The company's software is in use across North America at a variety of businesses, which has provided the company with experience in a wide range of industries and disciplines.

Data-Basics provides field service software, work order software, dispatching, and service management software solutions to automate the field service, accounting, service dispatching, and more for service contractors, facilities maintenance and similar industries.

Posted by Industrial-Manufacturing at 06:08 AM | Comments (0)

360 Interchange's Sustainable Bamboo Flooring On Living With Ed

360 Interchange's sustainable bamboo flooring was featured in an episode of HGTV's hit show, Living with Ed.

Ashland, OR (PRWEB) October 18, 2007 -- 360 Interchange, Inc. provided strand-woven bamboo flooring for the episode of the critically-acclaimed show Living with Ed, which aired on HGTV Monday night, October 16th. In the show, Ed Begley, Jr. and his wife Rachelle Carson visited an eco-remodel of a bedroom for a family that has made significant changes in their life to live more sustainably. The flooring from 360 Interchange was an integral component of the room's makeover, providing a unique aesthetic in addition to long-lasting durability from a rapidly-renewable resource, bamboo.

360 Interchange's bamboo products are "mature harvest" to ensure the long-term sustainability of the crop, and low-VOC to make sure that there is no toxic outgassing in the home after installation. Strand woven bamboo is a unique flooring product that uses strands of bamboo that are weaved together and then compressed into a solid product using adhesive. The final product is up to twice as hard as traditional oak flooring, but because bamboo can be harvested every 5 years sustainably, producers can create twenty or more generations of product in the amount of time needed for one harvest of oak.

"We were very happy have the opportunity reach such a large audience with the potential pitfalls and eco-friendly advantages of bamboo flooring, as well as install some of our sustainable flooring products for a wonderful family that is making smart choices about how to live more sustainably" said Vice President of Marketing & Business Development, Josh Bradley.

About Living with Ed
Living with Ed features Emmy-nominated Ed Begley, Jr. and his wife Rachelle Carson as they balance the Hollywood lifestyle with environmentally-conscious living. The critically acclaimed show has been a great success for HGTV, entering its second season as the series to watch for the ecologically minded. The show airs Mondays at 10:30 p.m. ET/PT.

About 360 Interchange
360 Interchange, Inc. was founded in 2004 by Bill Patridge anticipating the significant growth in high-quality, low cost production of goods in China. The company offers ecoSolutions™, a unique strategy to focus on sourcing, developing, marketing and selling eco-friendly products and materials to high-volume customers for some of the largest industries in the world. 360 Interchange is working to partner with manufacturers and buyers worldwide to find, develop and market new products that replace some of the most wide-spread, damaging materials in use today.

Posted by Industrial-Manufacturing at 06:08 AM | Comments (0)

Patio Enclosures, Inc. Named ‘Top Performing Sunroom Company’ Four Consecutive Years in a Row

Patio Enclosures, Inc., the largest manufacturer and installer of sunrooms in the US, has been named the "Top Performing Sunroom Company" in North America for the fourth consecutive year by Qualified Remodeler Magazine.

Macedonia, Ohio (PRWEB) October 17, 2007 -- Patio Enclosures, Inc., the largest manufacturer and installer of sunrooms in the US, has been named the "Top Performing Sunroom Company" in North America for the fourth consecutive year by Qualified Remodeler Magazine. In addition, Patio Enclosures, Inc. was listed as the "fourth largest US Remodeler” in Qualified Remodeler Magazine’s annual ranking of the Top 500 Remodeling Companies.

"We are proud to be recognized once again as the 'Top Performing Sunroom Company' in the sunroom category for Qualified Remodeler Magazine’s Top 500 Remodeling Companies,” stated Patio Enclosures, Inc. President and CEO Ken Sekley. "We continually improve our sunrooms to bring customers superior, energy-efficient sunroom products that increase homeowner value and add high-quality living space. In turn, we have been rewarded with their business.”

Patio Enclosures, Inc. recent initiatives include attaining Energy Star® ratings on its ComfortGard Plus® sunroom glass and other key sunroom components to ensure the highest comfort and energy-efficiencies for its sunroom offerings.

Patio Enclosures, Inc. employs a "custom manufacturing" approach, whereby its design consultants determine how the consumer will utilize the sunroom, then manufacture it to custom specifications in virtually any style to blend seamlessly with a home's existing architecture. Because it doesn’t use standard-sized sunroom doors and windows, Patio Enclosures, Inc. can provide its customers with what it calls the “Edge-to-Edge Advantage™”, the ability to produce sunroom designs with floor-to-ceiling and wall-to-wall glass for maximum outdoor views.

Founded in 1966, Patio Enclosures, Inc. is headquartered in Macedonia, Ohio and is the largest manufacturer and installer of sunrooms in North America. It has branches, franchises, and dealers throughout the United States and Canada serving residential and commercial sunroom markets. Patio Enclosures, Inc. also markets a complete line of vinyl replacement windows, retractable and window and door awnings, and custom blinds and shades for sunrooms.

Links:
http://www.patioenc.com/Products/Sunrooms.aspx
http://301url.com/Qualified-Remodeler (Qualified Remodeler Magazine article)
http://www.patioenc.com/Advantage/ComfortGard.aspx

For more information, contact:
Reginald Carter, Public Relations
Patio Enclosures, Inc.
750 East Highland Road
Macedonia, Ohio 44056
phone (330)468-0700 ext. 2278
fax (330) 908-1123
reggie.carter @ patioenc.com

Posted by Industrial-Manufacturing at 06:07 AM | Comments (0)

Power Equipment Direct Launches SnowBlowersDirect.com

Snow Blowers Direct is most convenient way to buy a snow blower from the leading snow thrower manufacturers.

Bolingbrook, IL (PRWEB) October 17, 2007 -- Today Power Equipment Direct launched SnowBlowersDirect.com -- a new online superstore exclusively dedicated to snow blowers.

"SnowBlowersDirect.com is the most convenient way to buy a snow blower," said Jon Hoch, founder and CEO of Power Equipment Direct.

Instead of drudging through slushy parking lots and battling blistery winds, customers can now shop online from the comfort of their own homes. SnowBlowersDirect.com offers a vast selection of consumer- and professional-grade snow blowers from the leading manufacturers, including Ariens and MTD Yard Machines.

In addition, SnowBlowersDirect.com carries a complete selection of hard-to-find snow blower accessories, including clean out kits, covers, front weights and gas cans. All snow blowers are shipped directly to the customer's home for free. In addition, the online superstore features a sales tax-free guarantee on all orders.

SnowBlowersDirect.com publishes in-depth buyer's guides, product recommendations and customer reviews to help shoppers pick the perfect snow blower. The web site also offers Priority Shipment service to rapidly reduce transit times. For a nominal fee, SnowBlowersDirect.com guarantees that the product is in-stock and ships the same business day if ordered before 3 p.m. EST.

"During a snow storm, snow blowers are notorious for selling out at local hardware stores," said Hoch. "With Priority Shipment, you don't have to fight though the snow for a chance to buy a snow blower."

SnowBlowersDirect.com currently services the contiguous (lower 48) states. Hoch says the company plans to expand into Alaska and Canada in the very near future.

Power Equipment Direct operates four niche online superstores. In addition to SnowBlowersDirect.com, the Bolingbrook, IL-based company operates AirCompressorsDirect.com, ElectricGeneratorsDirect.com and PressureWashersDirect.com.

Posted by Industrial-Manufacturing at 06:06 AM | Comments (0)

Business Coach Clay Nelson to Teach Business Owners the Value of Accountability and Having a Written Plan at Aqua Show 2007

On November 14th and 15th, 2007, business coach Clay S. Nelson will present two programs on business planning and the role accountability plays in running a successful business at Aqua Show 2007 in Las Vegas, Nevada.

Santa Barbara, CA (PRWEB) October 17, 2007 -- Having spent 14 years as a contractor himself, and the past two decades coaching clients in the construction and remodeling industry, nationally-known business and life coach Clay S. Nelson understands the ins and outs of running a construction business.

On November 14th and 15th, 2007, Nelson will share his business experiences with attendees of Aqua Show 2007 in Las Vegas, Nevada, where he will present two programs designed to help business owners put their companies on the path to greater success.

The first program, "A Written Plan: The One Solid, Underlying Fundamental You Can't Afford to Be Without" focuses on how to create a business plan that produces real results.

• Learn the real purpose behind writing a business plan, and what it provides
• Learn the basics of what to include in a business plan
• Common business plan mistakes to avoid

"Many businesses today operate with an outdated business plan--or without a plan at all!" Nelson explains. "But how can you expect to compete effectively in today's fast-paced construction industry without a solid, written plan to guide your business through changes in the economy, changes in technology AND changes in your personal life?"

The second program, "Accountability = Success" shows the power accountability has to create fun, excitement, and take the guess work out of what is expected from whom and by when!

• Discover the tools needed to set and track goals
• Learn how to ask for help and communicate effectively
• Make accountability a part of the company's toolbox for success

"Accountability is an invaluable tool for all aspects of running a business," Nelson says, "from having a great home life, to running a productive office, to maintaining an efficient environment at the jobsite and all points in between. Management needs to know how to ask for help so they don't wear themselves out trying to do everything themselves, and the team needs to know how to communicate what they need so that everyone is clear on what needs to be done to complete projects on time, on budget, and to keep the customer happy."

Nelson has been a featured speaker at many national construction events and conferences, including the NAHB Custom Builder Symposium, The Remodeling Show, and is an upcoming contributor to Custom Home Magazine. He creates his speaking programs to give conference attendees the insights, encouragement, and straightforward tools they need to get the most out of their conference experience and keep the momentum going once they've returned to their jobs.

Clay Nelson founded his company, Clay Nelson Life Balance, out of his own life philosophy: To teach what one has learned in life is the greatest gift one has to give. The company's innovative programs teach individuals and businesses how to set goals, get past what stops them from accomplishing them, and create written plans that help them attain extraordinary results.

For more information about Clay Nelson's speaking schedule, and to learn more about the products and services Clay Nelson Life Balance provides for contractors and remodelers, please visit http://www.claynelsonlifebalance.com . For more information about the Aqua Show 2007 and to register, visit http://www.aquashow.com/

Posted by Industrial-Manufacturing at 06:06 AM | Comments (0)

Sitephocus.com Image Library for Designers and Developers Continues Growth

Sitephocus.com, the on-line image library of the built environment, has exceeded 15,000 images with its October 2007 update. The update includes the first part of a two part series focusing on Seattle, Washington and the surrounding area.

(PRWEB) October 17, 2007 -- Sitephocus.com, the on-line image library dedicated to documenting urban form and public spaces, continues its leadership in providing images and related management tools for professionals involved in shaping the built environment (i.e. architects, landscape architects, urban designers, developers). With this month's update complete, the site now comprises over 15,000 images of sites from around the world. The update includes the first part of a two part series focusing on Seattle, Washington and the surrounding area.

"Reaching this milestone has underscored our commitment to providing new and exciting images every month," said Co-founder Chris Whitis.

Previous updates have included Barcelona, Vancouver, Minneapolis, and other major cities. By continuing its commitment to providing between 300-500 images a month, sitephocus.com is projected to exceed 20,000 images by the same time next year.

Sitephocus.com is a subscription based service started by Brian Phelps and Chris Whitis, two landscape architects who became frustrated with lack of easy to find, relevant imagery on-line for designers. "We love design, we love to travel and we love photography. Putting them all together has been very exciting for us," said Phelps.

Together they have created an easily searchable, cost-effective resource that assists design professionals in quickly finding photography for presentations, reports, and communications with their clients. The image library includes a wide array of subject matter relevant to their subscribers. Examples include streetscapes, public spaces, architecture, parks, site furniture, site elements, and transportation.

For more information visit sitephocus.com at www.sitephocus.com.

Posted by Industrial-Manufacturing at 06:05 AM | Comments (0)

Anderson Homes Welcomes New Architecture Manager

Anderson Homes, the largest privately held homebuilder in the Raleigh area, recently added Rick Maddox to their workforce as Architecture Manager. Maddox has more than 15 years of experience in the home building industry, working for a variety of builders throughout Arizona and California.

Raleigh, N.C (PRWEB) October 17, 2007 -- Anderson Homes, the largest privately held homebuilder in the Raleigh area, recently added Rick Maddox to their workforce as Architecture Manager. Maddox has more than 15 years of experience in the home building industry, working for a variety of builders throughout Arizona and California.

Maddox will initially be accountable for new product creation and implementation, existing plan maintenance and brochure creation and maintenance. His first major projects include driving downtown Raleigh's Blount Street Commons row homes and carriage homes to completion, creating six new plans for the single-family homes at Briar Chapel in Chapel Hill and enhancing plans for the townhomes at the Villas at Forest Hills in Pinehurst.

"We couldn't be more thrilled to have Maddox aboard," said Robert Smart, Vice President of Construction of Anderson Homes. "I am glad to finally fill such a critical position within our company. With Maddox's experience and innovative thinking I believe that we are setting our company up for much success in the future."

Anderson Homes
Anderson Homes, the 2006 and 2007 ENERGY STAR® partner of year, offers 27 years of leadership in home innovation, bringing energy efficient and green building practices into reality for all price ranges. The area's largest privately held homebuilder, Anderson Homes builds Peak Performance ENERGY STAR® Homes, utilizing innovative technologies and construction practices, while meeting strict EPA guidelines. As a testament to the quality and craftsmanship, every Anderson home is backed by a 10-year structural warranty through RWC, one of the nation's most respected new home warranty companies.

Posted by Industrial-Manufacturing at 06:05 AM | Comments (0)

Sun Brite Supply Inc. Announces The Opening Of Another Pressure Washing Supply Store For Pressure Washers

Sun Brite Supply, a specialty chain and leading supplier of pressure washers, sealers and cleaning solutions, is planning the opening of a new store at the start of 2008.

Lawrenceville, GA (PRWEB) October 17, 2007 -- Sun Brite Supply (www.sunbritesupply.com), a specialty chain and leading supplier of pressure washers, sealers and cleaning solutions, is planning the opening of a new store at the start of 2008.

Sun Brite Supply is considering possible locations in several southeast cities, including Orlando, Raleigh, Knoxville, Charleston, and Mobile. This will be the third location of their "local store" concept, joining shops in greater Atlanta and metropolitan Washington, DC. The company was established in 1998 in Georgia, and currently ships pressure washing products all over the country from their Georgia warehouse.

"Establishing regional stores, which began in 2004, allows us to provide contractors with immediate access to products, information, and customer support, letting pressure washing contractors respond faster to the needs of pressure washers" according to Peter Marentay, president of Sun Brite Inc. "Our local store concept" he continued, "has been well-received as a 'one-stop' shop for the contractor on-the-go. Our customers have also been overwhelmingly responsive to the educational opportunities offered at their local store - along with the product support we are so well-known for. Contractors are busy people to whom convenience means a lot. They appreciate being able to get technical advice from experienced staffers, attend demonstrations and educational seminars near where they live, and, of course, they love the product line and the prices."

"We are optimistic about adding stores all along the eastern seaboard over the next several years" Marentay went on to say, "and cities in both the southeast and on the west coast are all particularly good markets for us."

Heading up the New Store Opening Team is veteran Nichole Anglin, who was a key part of the Georgia staff before being tapped for this new duty. Her product knowledge and experience with pressure washing made her the right choice to lead this project.

Posted by Industrial-Manufacturing at 06:04 AM | Comments (0)

DesignerHardware.com Announces its Preferred Online Partnership with Baldwin Hardware

DesignerHardware.com (DHWH) has recently become the first Baldwin Hardware Preferred Online Partner. Baldwin has built its name and reputation on its attention to detail, quality, style and timeless good taste. Combined with its more than fifty years of commitment to making its products look better and last longer, these are the reasons that Baldwin is recognized as the premier manufacturer of solid brass lock sets, practical yet elegant.

(PRWEB) October 17, 2007 -- DesignerHardware.com (DHWH) has recently become the first Baldwin Hardware Preferred Online Partner.

Baldwin has built its name and reputation on its attention to detail, quality, style and timeless good taste. Combined with its more than fifty years of commitment to making its products look better and last longer, these are the reasons that Baldwin is recognized as the premier manufacturer of solid brass lock sets, practical yet elegant. Your handleset is the first thing your visitors see; let it leave an endless impression on everyone who visits your home. The right handleset is a unique blend of artistic and architectural design, finish and craftsmanship. Find the perfect door hardware from Baldwin; which offers a full collection of interior and exterior door hardware, matching locks, numbers, hinges, bell buttons, knockers, kick plates and bath accessories. Baldwin products evoke a sense of quality and style. At DesignerHardware.com delivering quality products and services are emphasized. Enjoy the pleasure of buying from a Baldwin Preferred Online Partner.

DesignerHardware.com is proud to present Baldwin's three hardware collections Archetypes, Estate and Images. These collections features the finest mortise and tubular handlesets, interior locks, knobs and levers. Find the quality, harmony and beauty in every lock.

Baldwin Archetypes express the artistic nature of different places/time, culture and style. It also evokes the character of your home, enhancing and deepening the pleasure derived from living there. Archetypes consist of three styles; Villa, Chateau and Craftsman. The Villa reflects the elegance of contemporary rustic hardware; on the other hand the Chateau is rich in ornamentation, style and pattern; while the Craftsman imitate the unique blend of natural materials and are hand crafted to perfection. Each of these styles are designed and crafted to perfection and are available in seven different finishes; Natural Silicon Bronze, Light Bronze, Medium Bronze, Dark Bronze, Aged Bronzed, Pewter Bronze and Natural White Bronze.

On the other hand, the Estate Collection is Baldwin's premier line of door hardware, featuring the finest mortise and tubular locks, knobs and levers. Each is creatively designed with ornately detailed solid forged brass and offered in a wide variety of affluent finishes. This line of door hardware consists of simple, unadorned, classic, inspired, delicate and fanciful designs, styling details and finishes that appeal to people who recognize that investment in their homes is one of the few things that is virtually certain to yield a solid return: bringing dividends to both the value of the home and the spirits of the people who live in them. One of the great things about the Estate collection is that it can be ordered in parts, as a result very unique and original designs can be developed.

The Images Collection is Baldwin's most affordable line of pre-packed door hardware that is commonly seen in home centers and hardware stores. This collection features the exceptional design, time-honored craftsmanship and refined elegance that are Baldwin hallmarks. Experience the pleasure that comes from owning the finest along with confidence in Baldwin's complete lifetime guarantee. The Images Collection offers a diverse selection of handlesets; knobs, levers and deadbolts in several superior finishes. Enjoy the richness and every day luxury of Baldwin in an easy-to-install tubular design.

The perfect blend of function and beauty! Dress your home in Baldwin elegance and added security.

About DesignerHardware.com

DesignerHardware.com offers a vast collection of exceptional solid brass products to elegantly enhance all areas of your home. Each collection features a wide variety of beautiful, high-fashion finishes. From door hardware to bathroom tubs, fixture, faucets, kitchen faucets, sinks and accessories and more; DesignerHardware.com provides the discriminating decorator with numerous options to accent and compliment your home's ambiance with distinction, taste and detail.

Designer Hardware's staff has over twenty-five years experience in the door hardware and plumbing faucet and fixture industry. The Designer Hardware Team has worked hard and are proud to bring you an exceptional website which makes online shopping easy by providing all the product information required and making the selection process simple. We endeavor to offer excellent service through our well-rounded employees with unrivaled product knowledge.

Posted by Industrial-Manufacturing at 06:04 AM | Comments (0)

Sunroom Kits Direct to Offer Online Sales of Premium DIY Sunrooms, Screen Rooms and Patio Roofs Direct to Consumers

Sunroom Kits Direct, a manufacturer of sunrooms and related products, offers the Do-it-Yourself homeowner the ability to purchase a sunroom direct from the internet website SunroomKitsDirect.com. These high quality DIY sunroom kits are offered in the basic Standard Sunroom Series or can be ordered in the Designer Sunroom Series.

Pittsburgh, PA (PRWEB) October 16, 2007 -- Sunroom Kits Direct, a manufacturer of sunrooms and related products, offers the Do-it-Yourself homeowner the ability to purchase a sunroom direct from the internet website SunroomKitsDirect.com. These high quality DIY sunroom kits are offered in the basic Standard Sunroom Series or can be ordered in the Designer Sunroom Series.

The Standard Sunroom Series is ideal for the cost-conscious DIY homeowner. This option takes advantage of Sunroom Kits Direct most popular sunrooms at pre-determined sizes and prices starting under $5800, including delivery to the customer's front door.

The Designer Sunroom Series provides online customers with additional sunroom design options and more sizes to choose from, for those who desire a custom DIY sunroom kit.

According to Sunroom Kits Direct spokesperson, Kristina Good, "With any selection, customers will be provided the highest-quality sunroom, and the DIY homeowner can save by installing the sunroom themselves. Sunroom Kits Direct offers additional living space at a fraction of the cost of traditional room additions. And, after delivery, an experienced and fully staffed support group will be available to answer any questions or concerns should they arise. We're committed to a successful outcome for all of our customers."

All Sunroom Kits Direct DIY Rooms Feature:

Maintenance free, PPG Duracron, baked enamel aluminum framing meeting requirements of AAMA 2603.
Clear, single pane, safety tempered glass, or optional insulated glass, in accordance with ANSI 297.1 and CSPC16 CFR 1201.
Universal track featuring a dedicated glide track for sunroom screens and glass doors and windows.
Removable screens.
Insulated, aluminum clad roof system manufactured in accordance with ICC-ES requirements.
Single slope roof, or optional gable style roof, white baked enamel painted finish.

Sunroom Kits Direct also offers a DIY Screen Room and a DIY Roof Only patio cover for your deck or patio to offer protection from the sun and rain.
For more information visit Sunroom Kits Direct at www.sunroomkitsdirect.com, or contact Kristina Good toll-free at 1-866-548-2998.

Posted by Industrial-Manufacturing at 06:03 AM | Comments (0)

October 16, 2007

HFO Announces Sales of Apartments in Salem, Hillsboro, Vancouver Totaling $11.5 million

HFO investment Real Estate announces sales of apartment buildings in Salem and Hillsboro, Oregon and Vancouver, Washington totaling $11.5 million.

Portland, OR (PRWEB) October 16, 2007 -- Hagerman Frick O'Brien (HFO), a real estate investment firm located in Portland, Ore., recently arranged the sale of the 64-Unit Evergreen Park and the 43-unit Eastland Court Apartments in Salem, Oregon; the 54-unit Hidden Village apartments in Vancouver, Washington, and the 30-unit Grant Park Apartments in Hillsboro, Oregon. Hagerman Frick O'Brien LLC handled the transactions.

The Evergreen Park Apartments, a 24-unit apartment complex in Salem, has sold for $3 million or $46,875 per unit. The buyer is M&M holdings of San Jose, CA and the seller is D. Darin Davison of Salem. Hugh Holtman of HFO Investment Real Estate represented the buyer.

Eastland Court, a 43-unit apartment complex in Salem has sold for $2.475 million or $57,558 per unit. The buyer is Tall Pine Properties II LLC of Bend and the seller is ELW Trust of Salem. Hugh Holtman of HFO Investment Real Estate represented the seller.

Hidden Village, a 54-unit apartment complex in NE Vancouver, Washington, sold to Koch Farm investments LLC for $3,900,000 or $72,222 per unit. Tim O'Brien of HFO investment Real Estate represented the seller, MK Peterson construction, Inc of Vancouver

Grant Park Apartments, a 30-unit apartment complex in Hillsboro sold to Mr. and Mrs. Gorman of Hood River for $2.15 million or $71,667 per unit. Seller was Bauer Storage, LP of Seaside. HFO brokers Cody Hagerman and Greg Frick represented the parties.

About HFO. HFO specializes in the sale of apartment properties throughout Oregon and Washington. Using cutting edge resources, HFO helps clients find dynamic investments and offers an insider's knowledge of the local market. It is HFO's mission to create wealth for its clients by providing extraordinary service, forging mutually beneficial, long-term relationships. Learn more at HFO Investment Real Estate.

Posted by Industrial-Manufacturing at 06:14 AM | Comments (0)

Florida Institute of Government to Host Public-Private-Partnership (P3) Summit for Government Leaders January 14-16, 2008

From January 14th through the 16th at the Holiday Inn Hotel and Conference Center, Melbourne, Florida will be the greatest opportunity to hear the nation's leading experts on P3 in Energy, Affordable Housing, Urban Planning, Financing, P3 legal arrangements, Financing, Hurricane building, School, Transit Oriented Development Projects, Highway Transportation, Privatization of City Government, Outsourcing, Water and Sewer projects and the East Lake Foundation success story.

Melbourne, FL (PRWEB) October 16, 2007 -- A real opportunity is coming to create better government through the use of P3. Government leaders will hear from Governor Charlie Crist and learn how to better manage, maintain, and promote cost effective solution oriented government for its citizens. This is a rare opportunity to hear from the Executive Director of the East Lake Foundation of Atlanta, about how urban blight was turned around using P3 to create one of the nation's shinning success stories of urban renewal. Also, Worldwide STOAM Company, one of the nation's leading modular design and manufacturing firms will demonstrate how building product for housing and buildings withstand winds of up to 180 mph, and reduces construction time and cost.

For municipal and county government to thrive, leaders must learn how P3 helps government projects through to completion. From January 14th through the 16th at the Holiday Inn Hotel and Conference Center, Melbourne, Florida will be the greatest opportunity to hear the nation's leading experts on P3 in Energy, Affordable Housing, Urban Planning, Financing, P3 legal arrangements, Financing, Hurricane building, School, Transit Oriented Development Projects, Highway Transportation, Privatization of City Government, Outsourcing, Water and Sewer projects and the East Lake Foundation success story.

Marilyn Crotty, Director of the University of Central Florida Institute of Government (http://www.cohpa.ucf.edu/iog/) said recently, "This is going to be one of the best all around conferences in Florida that will touch on every aspect of public-private-partnerships, a real added value for our Florida government leaders."

Carol R. Naughton, Executive Director of Atlanta's East Lake Foundation said, "I try to seek out opportunities to talk about the East Lake Foundation successes. I want to spread the word about how urban renewal can improve living arrangements, education, and after school recreational activities. I believe anything is possible when teaming with government, industry and non-profits."

For additional information on the news that is the subject of this release, or to obtain a brochure, contact Robert Knauer, CEO of the Acquisition Institute Inc., or visit www.public-private-partnerships.org.

About The Acquisition Institute Incorporated
Mr. Knauer started TAI Inc. to promote the use of P3 and important acquisition topics to help government create better workable solutions to problems that exist in today's complex world. A recognized leader in government contracting and privatization, along with P3, he is certified by the National Institute of Government Purchasing and National Association of Contract Management.

About the University of Central Florida IOG
The John Scott Dailey Florida Institute of Government (IOG) is a statewide institute established in 1981 by the Florida Legislature. The purpose of the IOG is to increase the effectiveness and quality of government in Florida through applied research, training, technical assistance programs and public service. IOG covers five state universities including UCF. The IOG offers high-quality, affordable programs and services tailored to the specific needs of each government community's service area, and works closely with their local constituent groups to plan and implement a unique selection of programs.

Contacts:
Robert Knauer, CEO, CPCM, CPPO
The Acquisition Institute Inc.
703-680-5663
770-754-9900 (P3 Summit)
http://www.a76performance.com

Marilyn Crotty
Florida Institute of Government
407-235-3960

Posted by Industrial-Manufacturing at 06:13 AM | Comments (0)

New Homes and Home Sites in California's Premier Wine Country for Sale via Online Auction

Freedom Realty Exchange (FRE), an online real estate auction marketing company and a member of the LFC Group of Companies, has just announced the launch of their "Wine and Roses" online auction to sell three new single-family homes and thirteen separate residential lots in Paso Robles, California. This online auction offers an incredible opportunity for buyers who have been contemplating purchasing or building a home in a new suburban development because the seller must sell this inventory.

Newport Beach, CA (PRWEB) October 16, 2007 -- Freedom Realty Exchange (FRE), an online real estate auction marketing company and a member of the LFC Group of Companies, has just announced the launch of their "Wine and Roses" online auction to sell three new single-family homes and thirteen separate residential lots in Paso Robles, California. With the Federal Reserve recently slashing a key interest rate by half a point, from 5.25 percent to 4.75 percent, lenders have subsequently dropped their prime lending rate, making this online auction the perfect opportunity for buyers who have been contemplating purchasing or building a new home.

"This auction presents an incredible deal for buyers and the recent Fed rate cut is icing on the cake," exclaims Bill Lange, President of the LFC Group of Companies. "Besides the prime location of these properties in California's wine country, this auction offers homebuyers a great opportunity to name their price because the seller must sell this inventory."

The three single-family homes and six of the home sites are located in Caymus Court, a suburban neighborhood in a newly-developed area of Paso Robles. Situated only a few miles away from historical downtown, the Paso Robles golf club and several wineries, Caymus Court is centrally located with all local public schools within a two-mile radius. The three modular, factory-constructed, homes range from approximately 2,360 to 3,160 square feet and offer from 4 to 5 bedrooms and 2.5 to 3 bathrooms. Standard amenities in these ready-to-move-in homes include tile entryways, solid quartz countertops, hardwood floors, multiple built-in fireplaces and custom cabinetry. The six large residential lots range from approximately 7,500 to over 9,000 square feet and are perfect for someone looking to build their dream home in a new development. Also offered in this online auction are an additional seven 1-acre lots just off of Highway 46 and Interstate 101 and conveniently located near a local winery and several golf courses.

Paso Robles, considered California's fastest growing wine region, holds the charm of a rural community, with its friendly and hospitable residents, yet is developing into a center of industry, viticulture, recreation and commerce. Nestled in the coastal mountain range of central California, it is a short drive from beaches, mountains, deserts and the thriving metropolitan areas of Los Angeles and San Francisco. Just 30 minutes from coastal communities, including picturesque Morro Bay, 30 minutes from the campus of Cal Poly State University in San Luis Obispo and 45 minutes from the famous Hearst Castle, Paso Robles features attractions and entertainment to fit anyone's interests. Besides being home to one of the United States' premier wine growing areas and an increasing number of hot springs resorts, Paso Robles also offers safe neighborhoods, state-of-the art recreation facilities, convenient shopping and dining, and excellent public schools.

With a bid deadline of November 15, 2007, interested buyers are encouraged to review more information about the properties and register to participate in this "must sell" online auction by visiting www.FRE.com/163R2.

Freedom Realty Exchange - part of the LFC Group of Companies For over 30 years, the LFC Group of Companies have served numerous Fortunate 500 companies, real estate developers, investors, financial institutions and government agencies by auction-marketing thousands of commercial, industrial, land and residential properties with an aggregate value well in excess of $5 billion.

Posted by Industrial-Manufacturing at 06:12 AM | Comments (0)

New Outdoor Design Website Delivers High Quality Renderings of Swimming Pools, Outdoor Kitchens, Barbecues, Firepits, Fireplaces, Ponds, Waterfalls, Ironwork, and Woodwork.

When it comes to outdoor design, a picture really is worth a thousand words. For homeowners, vivid illustrations can give contractors a clear picture of the look they want for their property. For designers and contractors, high-quality images and perspectives create powerful presentations that capture the imagination of clients. Fetch-A Sketch.com, a new e-commerce website, enables contractors, designers, and homeowners to present their landscaping ideas using first-class drawings created by today's top designers.

Canoga Park, CA (PRWEB) October 16, 2007 -- When it comes to outdoor design, a picture really is worth a thousand words. For homeowners, vivid illustrations can give contractors a clear picture of the look they want for their property. For designers and contractors, high-quality images and perspectives create powerful presentations that capture the imagination of clients. Fetch-A Sketch.com, a new e-commerce website, enables contractors, designers, and homeowners to present their landscaping ideas using first-class drawings created by today's top designers.

Fetch-A-Sketch.com is an online source for ready-to-use outdoor design illustrations. The site offers thousands of drawings, from full landscape designs to renderings of individual features like pools, ponds, waterfalls, fireplaces, outdoor kitchens, and interior designs.

Homeowners can use the site to collect ideas and then print them out to show their contractors. They can browse by topic or look for work from their favorite designers. The site also provides a contractor referral service to locate qualified professionals in their area.

Contractors can purchase, download, and print high-resolution perspectives to create winning presentations for their clients. Designers will also find Fetch-A-Sketch useful because it offers an ideal venue for showcasing their work and generating additional revenue from plans they've already created.

Fetch-A-Sketch features work from a variety of designers. The first company featured is The Green Scene, an award winning California-based outdoor design firm. Included are hundreds of drawings from The Green Scene's designer Scott Cohen, whose work has been featured on Home and Garden Television, in Better Homes and Gardens, and numerous other national media.

"These are the same renderings I've used on programs like HGTV's Landscaper's Challenge, Designing for the Sexes, Big Splash, Property Buzz, and Get Out, Way Out! We see this as a way to share some of our design secrets with others", says Cohen.

Contractors and homeowners who use Fetch-A-Sketch.com can be confident that the plans they select are expertly designed. Before being added to the site, new drawings undergo an approval process to ensure that only top quality work is featured.

"Not only is this an inspirational design tool for homeowners and professionals, says Cohen, it's also a fantastic way for clients and contractors to communicate their ideas to each other."

The site has been designed with convenience, affordability, and flexibility in mind. Drawings can be purchased in a variety of sizes and printed in color or black and white. Drawings can be downloaded for printing in home or office or can be purchased and professionally mounted in poster size. Prices start at $9.99, depending on detail, content, and additional services purchased.

Fetch-A-Sketch promises to give designers, contractors, and homeowners the tools they need to create stunning landscape designs.

About Scott Cohen and the Green Scene
Scott Cohen is President and Supervising Designer for The Green Scene, a premier outdoor design and construction firm based in the Los Angeles area. His work is featured on Home & Garden Television and in numerous national magazines and books. A Masters of Design Award Winner, Cohen is known for his spectacular gardens that combine the best of outdoor living with inspired artistic touches.

Posted by Industrial-Manufacturing at 06:12 AM | Comments (0)

Powerbilt Steel Buildings Gains GSA Approval for Pre-Engineered Buildings

Leading steel building supplier offers simple building solutions for GSA customers.

Virginia Beach, VA (PRWEB) October 16, 2007 -- The General Service Administration (GSA) recently granted approval to Powerbilt Steel Buildings, Inc for its prefabricated steel building systems. Now, federal customers will be able to order a steel building using the GSA pricing structure and with improved customer service.

"We understand our federal customers are looking to obtain quality products that meet strict budget requirements as well as tight deadlines," said Stephan Michaels, CEO of Powerbilt Steel Buildings. "This approval will simplify the ordering process, provide those looking to utilize the GSA discount better access to our products and in the long run, save taxpayers money."

Originally used for military barracks during WWII to house troops and supplies, these versatile arch-style steel buildings are now more commonly used for many other military, government and commercial applications. Some building uses include training facilities, office buildings, equipment and supply storage warehouses, vehicle garages and workshops, correctional institutions, public works buildings, Fire & EMS Stations and even schools.

Not only does steel outlast other building materials, but pre-engineered buildings are maintenance free and easy to build. Along with their durability these versatile steel building kits provide an all-useable space while saving you time and money on construction, maintenance and repair in comparison to other building materials.

About Powerbilt Steel Buildings
Powerbilt Steel Buildings designs and manufactures quality pre-engineered steel buildings for many applications including government, commercial, residential, industrial and agricultural uses. Powerbilt Steel Buildings uses only the strongest US steel and American labor and provides excellent customer service along with superior products backed by a 30-year warranty direct from the factory.

Some of Powerbilt Steel's federal customers include Maryland Air National Guard, USDA New Orleans and Charleston Federal Prison System.

To learn more about Powerbilt's steel building systems and for GSA Contract information, please visit www.powerbiltbuildings.com/government-buildings/index.htm.

Posted by Industrial-Manufacturing at 06:11 AM | Comments (0)

VFW Companies Group forms Great Beach Attractions Corporation "GBAC" as a Capital Investment vehicle for Bringing Major Themed Attractions and Theme Park Development to the Florida Panhandle

VFW Companies Group, Inc. has announced the formation of Great Beach Attractions Corp. - GBAC - to focus on theme park and themed attractions development in the Florida Panhandle.

Panama City Beach, FL (PRWEB) October 16, 2007 -- Representatives of the VFW Companies Group announced today the formation of an investment arm that will focus on capital investment for major new themed attractions and theme park development in the Florida Panhandle. The new entity - the Great Beach Attractions Corporation "GBAC" (www.greatbeachattractions.com) - will act as an investment holding company for such developments, with the VFW Companies Group organizing acquisitions, planning, and construction for each GBAC project.

"We've formed Great Beach Attractions Corporation to expedite our attractions development activities for Northwest Florida," said Frank Wood, Jr., Chairmand and CEO for the VFW Cmopanies Group, "we've been proceeding with concept development for new attractions, site selection, and capital formation, as well as possible licensing and attractions management. It is exciting to see the level of interest."

The VFW Companies (www.VFWcompanies.com) is an active commercial developer, home builder, and general contractor, with an in-house services team providing comprehensive property management and operational support. The Company leverages its expertise in these areas with a matrix-style project management and implementation organization that includes third-party design, construction, and consulting professionals.

"We have long believed that our combination here of the best beaches in the Southeast U.S., and a brace of world-class attractions, will be an unbeatable combination to attraction visitors, meetings and conventions, and new residents to the area," said Mr. Wood, "we believe the next ten years are going to be the decade of the Florida Panhandle."

"One of the great economic booms in this region's history is about to commence," said Don Bredberg, Managing Director of Stonecreek LLC (www.stonecreekllc.com) and an advisor to the VFW Companies Group on area-wide attractions, theme park, and tourism development. "The new Panama City-Bay County International Airport has cleared its environment hurdles and is being readied for construction. When the new international airport opens up the world to Panama City Beach, Bay County, and rest of the region, visitor demographics and seasonality will fundamentally expand. This is the first new international airport in the U.S. in a very long time. This region is going to be connected to the rest of the U.S., the Caribbean, and Latin and South America for the first time."

The VFW Companies Group, Inc. was formed by Frank Wood, Jr. in February, 2006 to act as the umbrella organization for a diverse portfolio of projects. The VFW Companies Group has invested significantly in real estate in Florida's Panhandle, focusing initially on Panama City Beach and greater Bay County. The Company is now expanding its project focus to encompass additional opportunities throughout Northwest Florida. Real estate in Panama City Beach has been a major focus of the Company since its inception. Panama City Beach is the heart of the Bay County region, and a major driver in Florida Panhandle economic development, a fact that is expected to be even more evident as the new Panama City Beach - Bay County Airport moves into construction.

VFW Companies Group is actively exploring next opportunities for its portfolio, and welcomes submissions that describe potential acquisitions or investment, recognizing the company's focus in Bay County, Florida, and throughout the Florida Panhandle. If a prospective acquisition or investment opportunity is elsewhere in the Southeast U.S., such projects may be considered if clearly within the core competency and interest of the Company.

For more information about this media release, please contact David Mitchel at Adventure Studios iMedia (www.adventure-studios.com).

Posted by Industrial-Manufacturing at 06:11 AM | Comments (0)

Thorburn Associates Awarded University of Illinois Acoustic and Technology Master Contract

TA announces the award of a master contract from the University of Illinois at Urbana-Champaign for acoustics and technology system design.

Castro Valley, CA (PRWEB) October 16, 2007 -- The University of Illinois at Urbana-Champaign awarded Thorburn Associates (TA) a master contract for audiovisual and acoustical design for classrooms and other education spaces. The contract, issued as a result of a national competitive solicitation, enables the university to receive expert design services.

The scope includes: providing audiovisual and control system engineering solutions for designated rooms on campus; programming equipment; construction project management; supporting the project with end-user training on systems; providing acoustical analysis and recommendations of architectural finishes; and participating in planning and construction meetings.

TA is committed to helping universities develop acoustical and technology system designs to more directly meet the needs of the students. This contract replaces a previous, similar contract. Previous work on the University of Illinois campus includes room upgrades to several spaces including: David Kinley Hall, Architecture, Foreign Language Labs, Noyes Labs, Veterinarian Medicine, Speech and Hearing and a Conference Center. Thorburn Associates also holds similar contracts for North Carolina State and the University of North Carolina at Chapel Hill. Overall, Thorburn Associates is working on 36 campuses across the United States.

The University of Illinois at Urbana-Champaign (http://www.uiuc.edu/) was founded in 1867 as one of the original 37 public land-grant institutions created by President Lincoln. With over 4,000 courses offered in 150 programs of study, UI supports over 42,000 students in their educational endeavors.

Thorburn Associates is a professional service firm providing acoustical consulting and technology system engineering for the commercial, corporate, leisure, residential and retail industries. For more information please visit http://www.ta-inc.com/

Corporate Office: Castro Valley, California 510-886-7826
Regional Office: Burbank, California 818-569-0234
Regional Office: Morrisville, North Carolina 919-463-9995

Thorburn Associates: 15 years of Designing Quality Environments
Acoustics ~ Audio ~ Video ~ Data/Telecom ~ Lighting ~ Security

Posted by Industrial-Manufacturing at 06:10 AM | Comments (0)

ConstructionDeal.com Relaunches Website to Make It Easier to Find a Home Improvement Contractor

ConstructionDeal.com relaunches their website to include a new design, easier navigation, a Contractor Directory, financing options and informative blogs for both project owners and contractors.

(PRWEB) October 15, 2007 -- After months of research, strategic planning and development, ConstructionDeal.com is proud to announce the relaunch of its website. As a leading company in the industry, ConstructionDeal.com helps project owners find reliable contractors, discover the latest remodeling trends, and find the right loan to pay for it all, free of charge.

Elita Dandridge, marketing manager for ConstructionDeal.com, states, "We took into account the feedback we received from site visitors, and have changed the look of our site and made it easier to navigate. Since our goal is to be a one-stop shop for anyone with a commercial or residential job request, we have added the Contractor Directory. We found some consumers don't want to wait for calls and wish to speak to a contractor in real time. Our Directory allows them to search for companies in their area and call them immediately," states Dandridge. "They simply enter their zip code, the type of contractor they're looking for, and begin reviewing the members of our network."

ConstructionDeal.com has partnered with a major lending institution to provide home equity loans and lines of credit. Homeowners can access the equity they've built up over the years to remodel a kitchen, replace their roof, or add a new room to their house. "While people are shopping for a contractor, they can apply for a loan on our website and find out right away how much money they'll have to spend. A partnership with a name lender made the most sense for our visitors. We want them to get the best rates possible," said Tim Clark, creative director.

The ConstructionDeal.com Update, a weblog for homeowners, has been added to the site to provide valuable tips, trends, and information on home renovation. "The more informed the consumer, the better choices they'll make when they remodel or repair their house. I try to provide product reviews, the latest styles, the hottest trends, and tips on how to make the remodeling process as painless as possible," notes Clark, author of all the site blogs. There is also a blog specifically for contractors, the Contractor Update that provides marketing, sales, and small business advice to service professionals.

About ConstructionDeal.com
Construction Deal.com helps homeowners and business owners get their projects done. Since 2004, they have developed a nationwide network of quality contractors and service professionals ready to help these project owners. People can post residential and commercial requests for free and are connected to local experts, usually within 24 to 48 hours. Construction Deal.com, a trusted member of the Better Business Bureau, is the fastest growing contractor referral service in the industry.

Contact:

Tim Clark
ConstructionDeal.com
Creative Director
818-657-8002
tim(at)constructiondeal.com

Elita Dandridge
ConstructionDeal.com
Marketing Manager
818-657-8017
elita(at)constructiondeal.com

Posted by Industrial-Manufacturing at 06:10 AM | Comments (0)

BidClerk.com Reports Construction Projects up for Bid in the Jacksonville, FL Area

BidClerk's daily update of Florida construction projects coming up for bid and starting construction within the next 90 days.

(PRWEB) October 15, 2007 -- BidClerk, the Construction Industry Search Engine, reported today that the following commercial construction projects are planning to go out for bid or start construction in the next 90 days in the Jacksonville, FL area. Businesses interested in providing services relative to these projects should visit BidClerk.com and reference the Project ID listed below to obtain direct contact information for each job:

Jacksonville, FL - Gate Parkway Office Building, 6061 Gate Pkwy., 6061 Gate Pkwy., November 2007, $15 million. Project ID: 680177

Jacksonville, FL - Community First Credit Union, Atlantic Boulevard, 3,000-square-foot bank, November 2007, $600,000. Project ID: 680915

Jacksonville, FL - Magnolia Park Building, Shad Road, 26,600-square-foot office and warehouse, November 2007, $3 million. Project ID: 681011

Jacksonville, FL - LDS Church / Jacksonville, To Be Announced, 12,000-square-foot religious facility, December 2007, $1.5 million. Project ID: 681669

Jacksonville, FL - GameStop #6038, 1,800-square-foot store, November 2007, $90,000. Project ID: 682313

BidClerk.com is the only Search Engine dedicated to providing businesses with in depth information on thousands of construction projects coming up for bids all throughout the United States. Our daily updates of commercial and residential construction project leads are available to general contractors, subcontractors and businesses in related industries that are seeking bid opportunities. For more information on bidding construction projects in your area, visit BidClerk online or call 877-737-6482.

Posted by Industrial-Manufacturing at 06:09 AM | Comments (0)

HousingIntelligence.com's Neighborhood Insights Provides Intelligence on Over 275 MSAs

HousingIntelligence.com, an online source for national and local intelligence about housing, announced enhancements to its web platform and a new application service available to users. The new application, Neighborhood Insights, is a dynamic web-based tool that shows residential property trends down to the neighborhood level.

Atlanta, Georgia (PRWEB) October 15, 2007 -- From the housing geeks at HousingIntelligence.com comes Neighborhood Insights, a research tool that covers 97% of all US residential real estate transactions. In addition to a standard collection of powerful reports, this dynamic multidimensional online reporting tool uses an unparalleled set of housing data and demographic information.

"Neighborhood Insights exemplifies our philosophies and approach for analyzing housing markets," said Jonathan Smoke, president and founder of BlueSmoke and HousingIntelligence. "When designing this application, we didn't settle for anything that came short of addressing the needs of national, regional or local housing market professionals. As a result, our data covers over 275 markets so that whether someone needs to cover the whole country, compare counties in a single market, or understand differences in housing market activity in local zip codes, Neighborhood Insights is the only application needed."

Neighborhood Insights represents an innovative combination of housing sales data and demographic data to enable incredible insights into housing trends. For builders, developers, real estate agents and lenders there is nothing as powerful as understanding which consumers are buying which homes, and how profiles change over time and across neighborhoods. Neighborhood Insights combines rich property data with the most current demographic data available to provide reliable profiles of the households buying homes.

For Jonathan Smoke, Neighborhood Insights is a dream come true. "I've spent over 12 years consulting to or working in the housing industry. This is the application that I dreamed of having. There's nothing like it. Where else can you follow home sales and price trends with information on who's buying down to the neighborhood for practically any market in the country?"

True to the old adage, it's all about location, location, location. The blog articles on HousingIntelligence.com continually emphasize that local factors really determine housing market performance. Anyone who wants true housing intelligence needs information that goes well beyond the national and MSA level statistics. In Neighborhood Insights you can drill down to the neighborhood--county, census tract, zip code or actual subdivision.

The application covers over 275 MSAs in the United States from the biggest housing markets like Chicago, New York, Dallas, Houston, Atlanta, Phoenix, and Washington, DC, to the smallest MSAs like Carson City, NV, Casper, WY, Hot Springs, AR, and Victoria, TX. The application includes data on both new and existing home sales.

Neighborhood Insights complements the monthly Market reports currently available through subscriptions on HousingIntelligence.com. For more information on these reports and Neighborhood Insights, visit the company's website at www.housingintelligence.com.

About HousingIntelligence
HousingIntelligence.com (www.housingintelligence.com) is the most comprehensive source of housing intelligence on the web. The website offers housing news, an informative blog, monthly market reports, and neighborhood-level insights into home sales and buyer profiles for over 275 metropolitan statistical areas in the U.S.

HousingIntelligence is owned and operated by BlueSmoke, LLC (www.BlueSmoke.biz). Founded in 2006 by Jonathan Smoke, BlueSmoke is an innovative market research and advisory firm focused on housing. The company firmly believes in finding a better way -- through innovative uses of technology, and economic and market research techniques -- to help builders, developers, investors, and consumers make better decisions regarding land, communities, housing and investments based on housing.

Contact Information:
Christina Weitzman
christina @ housingintelligence.com
888-721-1116

Jonathan Smoke
jonathan @ housingintelligence.com
888-721-1116

Posted by Industrial-Manufacturing at 06:08 AM | Comments (0)

Gem of Caribbean Real-Estate Going On Auction

33 Hectares (82 Acres) of historic Caribbean real estate goes up for sale. This property, Indian Point Estate, part of the Louis D'or Estate on the island of Tobago, is the ideal living space for the nature lover and is situated a mere 25-minute drive from the capital city of Scarborough, and the Crown Point International Airport. Auction date is set for December 1st 2007.

(PRWEB) October 15, 2007 -- Resting invisibly from the eyes of modernization on the south eastern coast of the Caribbean island of Tobago lies a hidden treasure of the perfect sun set and 180 degree views of the Atlantic Ocean. This 33 Hectares (82 Acres) of contoured, windswept land is now ready and waiting for the right buyer to reveal its history’s secrets.

The buyer of this gem of Caribbean real estate gets the best of both worlds … from the uncharted forest and isolated beaches to the steel-pan playing outdoor cafes and exotic restaurants. From Indian Point Estate, you can get to the bustling Capital of Scarborough, in mere minutes and even better, you are situated only steps away from the Crown Point International Airport.

Here, it seems like time stood still for nature’s hands to mold its pure, crystal clear springs, which empty themselves into the river’s mouth on the northwestern base of the headland. The meandering coastline of secluded coves and uncharted inlets all whisper tales of there past.

The wetlands’ valley floors will entice the nature enthusiast within you with its exhilarating Tropical grandeur. These contours give birth to a luxuriant and diverse array of one-of-a-kind flora and fauna. Your senses will indulge in the mysterious wild life; with their intense color and harmonious sounds. Indian Point Estate tickles your adventurous side and yet offers you utter and complete sanctuary. Spoiling you and bowing to your every whim and fancy, this magical gem of Caribbean real estate gives special and full attention to your every mood.

POSSIBLE USES:
1. This property can be developed into an ultra-private residence

2. It can be developed as originally planned with a Hotel Resort Complex on the seafront at the foot of the valley and housing clusters on 1 Hectare (2.5 Acres) parcels on selected sites on the side and top of the valley (outline approval previously granted)

3. It can also be developed into 5 acre plots which can be marketed independently

Noteworthy is that the local authorities are receptive to a development that preserves at best the nature of the environment and incentives including tax holidays for up to five years are offered to approved real estate projects. In addition to this there is no volcanic activity on the island and it lies outside of the hurricane zone. Political stability exists and crime and pollution are practically non-issues.

To entertain the hidden explorer, Indian Point Estate also had its own keeper. But, not just any keeper, a keeper that left a book. A bound diary of its history all mapped out waiting for your arrival. Read about how the estate began in the 1700s when the British colonized Tobago, right up to the point when it was sold in the 1800s.

Its very own website, www.Indianpointestate.com reveals so much, yet, not worthy enough to impart its true magical past. Here and only here will you find the diary to read yourself into living the dream.

This land owns many secrets but only one will know them all. This is your opportunity to own your own sunny, Caribbean escape and embrace paradise.

Auction of this gem of Caribbean real-estate has been scheduled for December 1st 2007. For additional information on this property please visit the official website at www.indianpointestate.com or the Auctioneer, Mr. Joel Langer, at www.escapeartist.com/International_Real_Estate/Auctions/ for more details.

Contact:
Joel Langer, Auctioneer
International Real Estate Auction
1-847-867-7518
www.escapeartist.com/International_Real_Estate/Auctions/

Posted by Industrial-Manufacturing at 06:08 AM | Comments (0)

Hot Work Permit Training Ensures Safer Work Sites and Reduces Corporate Risk

Helping construction and industrial workplaces fully implement their Hot Work Permit programs.

Novi, MI (PRWEB) October 15, 2007 -- Mastery Technologies, Inc., a leader in workplace health and safety training technology, announces the release of a new safety training course, Hot Work Permits. The interactive training program, developed with video produced by Digital 2000 - a leader in OHSA-compliant, custom safety training videos - is available on Web, Intranet, or CD.

"Where safety and corporate assets are at risk, this course is extremely important," said Kirk Berry, vice president of marketing for Mastery Technologies, Inc. "This is just the kind of course that our industrial and construction customers have been asking for."

In 28 interactions, the course teaches the basics of the hot work permit system, the details of permit variations, and valuable safety precautions, all while reinforcing the need for hot work permits. This training is important for anyone working around or with open flames or sources of heat that could ignite materials in the work area.

"Hot work permits are more and more important as evidenced by the increased number of burned down buildings and facilities, and the potential for injuries," said Don Brown, founder and CEO of Houston-based Digital 2000. "We developed this program to provide an understanding of the rules of hot work permits and how to implement such a program within any organization. Construction companies, in particular, should implement strict hot work permit programs in both new and remodel projects."

Lesson interactions provide opportunities for the worker to apply what he or she has learned. To ensure the promise of mastering all course objectives, each missed question is followed by a review of the specific content. At the end of each lesson's quiz, the learner's attention is focused on areas of difficulty until he or she can successfully demonstrate mastery. This course documents mastery of the following performance objectives:

Follow Basic Hot Work Permit Procedures:

Define 'hot work'
Identify examples of hot work
Recall a hot work permit's maximum time limit
Agree that only designated persons can issue hot work permits

Use Precautions When Performing Work Requiring Hot Work Permits:

Recall the amount of space to clear debris when hot work is performed
Choose the precautions to take when performing hot work in an area with combustible floors
Agree never to perform hot work on combustible walls or ceilings
Select the proper times when a fire watch is required

Abide by the Hot Work Permit System's Regulations

Agree that contractors must follow the employer's hot work policies
Identify hot work permit requirements
Recall the maximum length of time a hot work permit can be issued for new construction
List types of work considered general hot work activities
Explain what to do with a permit once the hot work is complete

Use Hot Work Permits in the Appropriate Locations

Choose areas requiring a hot work permit

Take All Safety Precautions When Working Around Hot Work

Agree to utilize smoke detectors when performing hot work

As in all courses offered by Mastery Technologies, Inc., questions are fully narrated, adding welcome support for learners with reading skill deficits. Narration also assists learners when English is their second language.

Mastery's exclusive Follow-up Review, standard in all Mastery Advantage courses, provides time-delayed reinforcement and review of the learner's newly acquired knowledge. The Follow-up Review enhances the transfer of knowledge to the learner's long-term memory.

About Mastery Technologies, Inc.
Mastery Technologies, Inc., located in Novi, Michigan and Plano, Texas, has been a leader in workplace health and safety training technology since 1986. Mastery has partnered with leading video content providers to co-produce the largest interactive multimedia training library available today to the workplace health, safety and environmental marketplace. Mastery Advantage™ products are sold by Mastery Technologies, its Licensed Content Partners and The Mastery Group. The Mastery Group is comprised of independent licensed distributors with in-depth experience in workplace training and technology.

Posted by Industrial-Manufacturing at 06:07 AM | Comments (0)

Environmental Service Professionals, Inc. Acquires Trade Associations

Assets in ESP’s Outreach to Home and Building Inspectors, Appraisers and Mortgage Underwriters

PALM SPRINGS, Calif. (Business Wire EON) October 15, 2007 -- Environmental Service Professionals, Inc. (OTCBB:EVSP) today announced the acquisition of the International Association of Managers, Inc. (IAMI). IAMI is the manager and owner of six associations that are intimately involved in ESP’s industry: the National Association of Real Estate Appraisers; the Environmental Assessment Association; the Association of Construction Inspectors; the Housing Inspection Foundation; the International Real Estate Institute; and the International Society of Meeting Planners. Together, these for-profit entities cover a wide range of inspection-related services, including construction inspection, environmental inspection and testing, promotion and development of home inspection, professional realty and appraisal reports, the provision of meeting planners, the promotion of ongoing education in appraisal review, and mortgage underwriting.

Collectively, these associations currently have a total of 8,000 members. Cumulative 2006 revenues for all six entities are estimated at $1,000,000 and earnings before income taxes, depreciation and amortization are estimated at $450,000. (Both numbers are approximate, and are unaudited.) The acquisition was effected as an asset purchase: ESP paid $659,000 in cash and assumed $134,000 in unearned revenue liability in the transaction. Management of all of the associations is now under the umbrella of ESP’s wholly-owned subsidiary, National Professional Services, Inc. (NPSI).

Edward L. Torres, Chairman and Chief Executive Officer of ESP, commented: “People don’t realize that often homes and buildings are uninsurable for mold and moisture damage. Our company was formed to offer training, stringent protocols, scheduling and administrative support for the Certified Environmental Home Inspectors (CEHIs) in our program. Consumers and organizations such as those represented in the IAMI memberships can avoid the consequences to both individual health and loss of property value associated with certain environmental issues by using ESP’s ‘gold standard’ inspection and management services.”

ESP’s first two acquisitions were National Professional Services, Inc. (NPS) and Allstate Home Inspection and Household Environmental Testing, Ltd. (AHI). NPS trains and educates industry stakeholders and consumers through certification programs; AHI offers a high-level home inspection and household environmental testing training curriculum along with the professionally-designated CEHI Program. The CEHI Program consists of a suite of environmental services: allergen screening, energy inspections, neighborhood environment reports, radon testing, moisture management program, mold testing, and new builder program.

About Environmental Service Professionals, Inc.

Environmental Service Professionals, Inc. is the first publicly-traded company established to consolidate the highly-fragmented home inspection industry and to specialize in environmental inspections. ESP is focused on the development and delivery of state-of-the-art procedures and tools to provide environmental services for addressing many environmental issues in the Building, Residential, Commercial and Real Estate industries. Its Healthy Home Assurance mission results in the mitigation of risk across the board for homeowners and for mortgage, title and insurance companies. The company’s motto is “peace of mind for your family, your home and your health.” For more information, visit the ESP web site at www.espusa.net.

Safe Harbor

Statements in this press release may constitute forward-looking statements and are subject to numerous risks and uncertainties, including, but not limited to, a lack of adequate capital to enable the Company to execute its business plan or make important business acquisitions in order to grow; the failure to complete successfully the development of new or enhanced products and services; the lack of market demand for any new or enhanced products and services the Company may develop; any actions by the Company or its partners that may be adverse to the Company; the success of competitive products and services; other economic factors affecting the Company and its markets; seasonal changes; and other risks detailed from time to time in the Company’s filings with the U.S. Securities and Exchange Commission. Actual results may differ materially from those expressed in this press release. The Company disclaims any obligation to update any statements in this press release.

Posted by Industrial-Manufacturing at 06:07 AM | Comments (0)

GPEC Program Accelerates Greater Phoenix Planning and Development

To compete in an increasingly global economy, companies need to move quickly in establishing business operations. The Greater Phoenix Economic Council (GPEC) and our communities have responded by introducing an accelerated permitting certification program that completes the process at the municipal level in 90 days or less.

Phoenix, Arizona (Vocus/PRWEB ) October 15, 2007 -- To compete in an increasingly global economy, companies need to move quickly in establishing business operations. The Greater Phoenix Economic Council (GPEC) and our communities have responded by introducing an accelerated permitting certification program that completes the process at the municipal level in 90 days or less.

“Most companies seeking to relocate or expand need to be operational within 12 to 18 months,” said Barry Broome, GPEC president and CEO. “Expediting the permitting process enables us to better compete with other markets vying for the same quality projects.”

Leadership for the 90-day or less permitting certification initiative is provided by GPEC’s Community Building Consortium (CBC), a collaboration of real estate development professionals throughout the region who are committed to increasing the quantity and quality of transactions in Greater Phoenix while ensuring the region’s long-term sustainability.

“CBC’s collaborative efforts will lead to successful projects that otherwise may move to other markets with more availability and capacity,” said Greg Coxon, CB Richard Ellis senior managing director and chair of GPEC’s CBC.

To qualify for 90-day or less permitting, projects must meet high-wage and community criteria, involve project professionals on a development team, participate in pre-phase meetings, develop competitive timelines, submit fully developed plans and maintain a pre-determined schedule.

The 90-day or less development team brings together the public and private sector and includes GPEC, communities, banks, brokerage firms, real estate developers, land owners and other parties to guarantee qualified projects both speed and certainty in getting design and permit times reviewed.

“Communities in Greater Phoenix recognize that in the business environment, time is money and we want businesses to be successful,” said Sheri Wakefield-Saenz, City of Tempe deputy community development manager and chair of GPEC’s Economic Development Directors Team. “We know that companies need to move to market quickly and GPEC’s 90-day or less certified permitting helps exemplify the region’s business-friendly environment and our commitment to attracting quality businesses.”

GPEC Program Accelerates Greater Phoenix Planning and Development (cont.)

“The 90-day or less certified permitting program is essential to landing the desirable regional and national projects that conduct multi-market searches,” said Steven Schwarz, ViaWest Properties managing director. “The assurance that users will have in knowing that their project will not get held up on the municipal level will result in Greater Phoenix being included on more initial lists, and make us much more competitive in landing projects needing readily available customized space.”

“GPEC's 90-day or less certified permitting holds tremendous promise for helping us provide better site selection services for our clients,” said Deane Foote, Carter & Burgess senior project manager, real estate and economic development.

Expedited permitting times will further position Greater Phoenix as a preferred and competitive region for companies with expansion or relocation plans.

For more information about GPEC’s CBC and 90-day or less permitting, visit http://www.gpec.org/gpec90-day.html

About GPEC
A true public/private partnership, GPEC works with its 18 member communities, Maricopa County and more than 140 private investors to promote Greater Phoenix to companies seeking a location where they can compete and thrive in today's global economy.

Posted by Industrial-Manufacturing at 06:06 AM | Comments (0)

Steinger, Iscoe & Greene, P.A., Assists Client in Million-Dollar Recovery

Client Joseph Mourning severely injured after a construction company leaves metal pipe protruding from a manhole.

West Palm Beach, FL (PRWEB) October 15, 2007 -- The law offices of Steinger, Iscoe & Greene, P.A., recently recovered $1 million for client Joseph Mourning, injured in West Palm Beach on April 17, 2003. Mourning, who recently celebrated his thirty-third birthday, severely injured his back when his vehicle struck a large steel pipe protruding from a manhole on South Flagler Drive. Due to traffic and other factors, he could not avoid the pipe that had been left by a construction company. As a result, his vehicle was jerked violently to the right, resulting in significant injuries to Mourning.

Mourning, who was in good health and an accomplished basketball player, suffered from cervical and lumbar disc abnormalities due to the accident—ultimately affecting his ability to continue his everyday activities. These injuries required two invasive surgical procedures, which were performed by surgeons at The Spine Center in Palm Beach Gardens. While these surgeries helped Mourning with some of his pain, he will likely have physical limitations for the rest of his life.

“Steinger, Iscoe & Greene worked to receive a judgment from the jury in this matter, and then won a critical decision in the Appellate Court to secure this recovery for Mr. Mourning,” said attorney Seth Pachter of Steinger, Iscoe & Greene. “I could not be happier for Mr. Mourning. He is a fine gentleman, and we are happy to help give him peace of mind and assist in alleviating the burden associated with his accident.”

A case against Ballast Nedam Construction, Inc., was filed on November 18, 2004, and was settled on September 14, 2007. (Trial Court Case No.: 502004CA010866XXXXMB, Fifteenth Judicial Circuit for Palm Beach County Appellate Court Case No.: 4D06-2557 Fourth District Court of Appeals.)

About Steinger, Iscoe & Greene
Founded in 1997, Steinger, Iscoe & Greene is a West Palm Beach-based law firm comprised of attorneys, case managers, legal assistants, legal investigators, and support staff. The firm is dedicated to helping clients seek the compensation they deserve for their injuries. In addition to providing knowledgeable advice and experienced advocacy, the attorneys at Steinger, Iscoe & Greene are committed to providing superior service to every client. For more information, visit www.InjuryLawyers.com

H. Shaw Heydt
Phone: 561.616.5550
Fax: 561.932.1577

Posted by Industrial-Manufacturing at 06:05 AM | Comments (0)

Ccr Propiedades e Inversiones S.A. Announces a Second Phase of Country Estate Properties at Vistas De Chirripo is Southern Costa Rica

CCR Propiedades e Inversiones S.A. is proud to announce the initiation of Phase 2 of Vistas de Chirripo Country Estates in southern Costa Rica. "With Phase 1 two thirds sold less than three months of completion of infrastructure, it is time to begin planning Phase 2", said developer Bill Herle, "This increased scale will ensure that Vistas de Chirripo will be a vibrant community well into the future, ideal for a retirement or seasonal home and as a sound real estate investment in an increasingly popular area of Costa Rica."

Vistas De Chirripo Country Estates, San Isidro, Perez Zeledon, Costa Rica (PRWEB) October 15, 2007 -- Bill Herle, spokesman for CCR Propiedades e Inversiones S.A., announced the acquisition of land for Phase 2 of the Vistas de Chirripo Country Estates development. Vistas de Chirripo is located in the Municipality of Perez Zeledon, 35 km inland from the Pacific coast, in southern Costa Rica. "The Phase 2 development is being announced due to the rapid sale of Phase 1 properties, with nearly 70% of Phase 1 lots sold within three months of infrastructure completion, said Herle, "The Phase 2 development land has been acquired by the company and will be available for sale after completion of service infrastructure."

Costa Rica's wonderful people and culture, social and political stability, positive attitude to foreign ownership of property, and tropical climate have made it one of the most popular locations for retirement and vacation homes. The specific attributes of the southern area around San Isidro in the Municipality of Perez Zeledon have until recently been a well-kept secret. 35 km. of paved highway leads inland from the Pacific coast to Vistas de Chirripo. On arrival, you will find a more temperate and less humid climate due to a higher altitude. Vistas de Chirripo is a much more eco-friendly development that has not required tree-cutting for roads and building sites on mountainsides, with resulting environmental damage, that so prevalent in the coastal regions. All these advantages are yours, within close proximity to the services and amenities of San Isidro, a city of 100,000 people.

Vistas de Chirripo offers large building sites and accompanying land at much more affordable prices than coastal property. Vistas has been designed to foster a real community-feel for its residents. The community facilities include a preserve with nature trails along a the Rio Penas Blancas, a common fruit orchard, and a central rancho (with kitchen!) as a gathering place A full-time caretaker is living on site, with his family, in a new home provided by the developer

"Vistas de Chirripo offers completely natural, green surroundings for your home with adjacent rainforest and spectacular mountain and valley views, yet only a short drive from both a city and the beautiful Pacific beaches," according to developer Bill Herle. As demand for these acreage properties has demonstrated, this is truly a wonderful combination.

While Phase 2 properties are now in the planning stages, there are great building sites still available (at original prices) in Phase 1.

Posted by Industrial-Manufacturing at 06:04 AM | Comments (0)

ECAD, LLC Announces Launch of New Website for Civil Engineering Services

ECAD, LLC, a new engineering consulting company is announcing the introduction of design support by phone, and has launched a new website detailing the production, cad management, and training services being offered to civil engineering firms in the Mid-west.

Columbus, Ohio (PRWEB) October 15, 2007 -- ECAD, LLC, (www.ecad-llc.com) a new engineering consulting company is announcing the introduction of design support by phone, and has launched a new website detailing the production, cad management, and training services being offered to civil engineering firms in the Mid-west.

Since ECAD, LLC is the only independent consulting company to provide training and production assistance for MicroStation and GEOPAK in the Mid-west area, launching the website was very important to interface with clients. With the launch of the new website, civil engineering firms now have an easier way to contact ECAD, LLC to request services and support.

"Launching the website was a crucial part in growing the service offerings for my clients and potential clients," said Ethan Schwartz, owner of ECAD, LLC. "The website enables companies to more easily get in touch with me to set-up training and consulting, along with phone support and CAD management."

ECAD, LLC offers part-time and full-time availability in the Mid-West region, depending on each engineering firm's needs. To find out how ECAD, LLC can help improve your company and to schedule services, visit the new website at www.ecad-llc.com, or contact Ethan Schwartz at 614-596-1720.

About ECAD, LLC:
ECAD, LLC is an independent, engineering consulting company in Columbus, Ohio offering services in MicroStation, GEOPAK and ODOT Roadway Plan production work. ECAD, LLC. offers consulting, customized training, support, and CAD management to engineering firms in the Mid-West region.

Posted by Industrial-Manufacturing at 06:03 AM | Comments (0)

Four Seasons Private Residences Denver Sells Second Penthouse Suite

Four Seasons Penthouses Sell at Record Breaking Prices Attracting Nearly $18 Million in Total: 1111 Tower LLC today announced it has now sold both of its penthouse suites in Four Seasons Private Residences Denver. Just last month a $10 million penthouse sold, and now the $7.9 million city-view penthouse has sold.

Denver, CO (PRWEB) October 15, 2007 - 1111 Tower LLC today announced it has now sold both of its penthouse suites in Four Seasons Private Residences Denver. Just last month a $10 million penthouse sold, and now the $7.9 million city-view penthouse has sold. The 5,600-square-foot, two-level city-view suite has three bedrooms, a den, loft and two balconies. The balconies total nearly 760 square feet, overlooking the incredible views of the Denver skyline. This purchase, combined with the sale of the $10 million front-range view penthouse, accounts for record-breaking prices for a pair of penthouse condos sold in downtown Denver.

The grandeur of Four Seasons is soon to come alive in the theater district of downtown Denver. Owners of a Four Seasons Private Residence Denver will have a view out their window that is displayed on coffee table books everywhere; an island in their kitchen that is a paradise of its own; Four Seasons service that isn't just for vacations anymore; and a neighborhood where the boys playing ball are the Colorado Rockies.

Construction of Four Seasons Denver began on September 24, 2007 with a groundbreaking ceremony featuring Mayor John Hickenlooper, who said the project "reinforces the Mile High City's stature as the business, social and cultural center of the Rocky Mountain West." Construction work is well underway at the site and the project is scheduled for completion by early 2010.

"Although Four Seasons Denver won't open its doors for a couple more years, the demand and excitement is palpable right now; people realize this is a unique opportunity," said Jeff Selby with 1111 Tower LLC and developer of Four Seasons Denver. "Downtown Denver has a luxury-living void, which this project fills. The countdown is on for when people can move into their Four Seasons Private Residence and enjoy Four Seasons amenities."

Owners of a Four Seasons Private Residence Denver will live in luxurious accommodations that are truly unique for the Mile High City. Owners will enjoy oversized balconies, fireplaces, exquisite finishes and spacious bathrooms with deep soaking tubs. The floor plans range from one-bedroom pieds-a-terre that start around 1,000 square feet to the now sold-out two-level penthouse suites with up to 6,100 square feet of livable space.

"Private Residence owners will get to enjoy some of the best views in the city and a perfect location in downtown Denver," said Michael Minchin, Director of Residential Marketing, Four Seasons Hotels and Resorts. "Four Seasons is known around the world for its unparalleled service, and when you live in a Four Seasons you get to enjoy that service everyday."

Four Seasons Hotel and Private Residences Denver will soar 45 stories high at the corner of 14th Street and Arapahoe Street, with 240 hotel rooms and 102 Private Residences. Situated in an ideal location, homeowners will be an elevator ride away from The Denver Center for the Performing Arts and all the other amenities located in the heart of the 14th Street Denver Theatre District.

Those interested in learning more about Four Seasons Private Residences can make an appointment to visit the Presentation Center at 1080 14th Street in downtown Denver by calling 720-946-3939 or 888-877-4081 or by visiting www.towerprivateresidences.com.

Disclaimer:
Cambridge Property Group, LLC is responsible for the marketing and sales of Four Seasons Private Residences Denver. 1111 Tower LLC uses the Four Seasons trademarks and tradenames under a license from Four Seasons Hotels Limited. Four Seasons Private Residences Denver are not owned, developed or sold by Four Seasons Hotels Limited or its affiliates (Four Seasons). The marks "FOUR SEASONS," "FOUR SEASONS HOTELS AND RESORTS," any combination thereof and the Tree Design are registered trademarks of Four Seasons Hotels Limited in Canada and U.S.A. and of Four Seasons Hotels (Barbados) Ltd. elsewhere.

Posted by Industrial-Manufacturing at 06:02 AM | Comments (0)

All Pro Trailer Superstore Awarded Car Mate Trailers #1 Trailer Dealer in the Nation

All Pro Trailer Superstore, located just outside of Harrisburg, Pennsylvania has been recognized by Car Mate Trailers as its number one Trailer Dealer in the Country, an achievement based on retail sales for the 2007 model year.

(PRWEB) October 14, 2007 -- All Pro has been one of Car Mate's top trailer dealers for over 20 years and is honored to be their number one trailer dealer for 2007. "We truly understand the importance of the trailer purchasing experience to our customers" remarks Jake Wagner, owner of All Pro "Our successes are driven by our daily focus on our company purpose of making customers for life and our continuous search for ways to add value to the All Pro experience."

Car Mate Trailers has been one of the nations leading manufactures of Open and Enclosed Cargo Trailers since 1982. Car Mate's trailer line also includes Car Trailers, Equipment Trailers, Utility Trailers, as well as Motorcycle Trailers and ATV Trailers. "The staff and management of All Pro TRAILER SUPERSTORE are to be congratulated on an outstanding year" said Rick Rathfon, Director of Sales at Car Mate Trailers. "They have been a solid performer for many years but in 2007 they took their operation to another level."

The quality of a Car Mate Trailer is undeniable with their seamless one piece aluminum roof, Dexter Torflex axles, and all LED lighting. It's apparent that Car Mate offers an above average product at a very competitive price. All Pro Trailer Superstore stocks hundreds of CarMate Enclosed Trailers for sale and each trailer can be fully customized or individually built to meet customer specifications.

"Our team can convert a stock enclosed trailer into a custom trailer by configuring bike chocks and floor ties downs to installing custom trailer cabinets, trailer flooring & LED lighting. "The possibilities are endless" states Wagner "We turn our customer's ideas into reality by converting their new trailer into exactly what they envisioned."

You can visit All Pro Trailer Superstore online at www.allprowest.com or at 6799 Carlisle Pike, Mechanicsburg, Pennsylvania.

Posted by Industrial-Manufacturing at 06:02 AM | Comments (0)

Darin Gray at Stadler Custom Homes of Austin named Construction Manager of the Year

At the 2007 Texas Star Awards ceremony, Darin Gray of Stadler Custom Homes of Austin was named Construction Manager of the Year. Darin was chosen from nominees from across 4 states including Texas, Oklahoma, Arkansas, and Louisiana.

Austin, TX (PRWEB) October 14, 2007 -- Darin Gray of Stadler Custom Homes of Austin was named Construction Manager of the Year at the 2007 Texas Star Awards ceremony. The awards ceremony was held Friday, September 28, 2007 at the Gaylord Texan Convention Center in Grapevine, Texas. Darin was selected from nominees in 4 states including Texas, Oklahoma, Arkansas, and Louisiana.

As the Director of Construction Operations at Stadler Custom Homes of Austin, Darin oversees all custom home and luxury condominium projects that Stadler builds. Darin has been a builder or working with custom home builders for 12 years. In 2007, Darin became a Certified Graduate Builder and Graduate Master Builder, a distinction held by only a few builders in Austin. Darin is active in the Lakeway Home Builder Association and attended the International Builders Show in Orlando, Florida as well as the Sunbelt Builders Convention in Dallas, Texas.

Darin's excellence in home building comes from his dedication to the customer experience. Explains Darin, "I've always been a people person. That's why I really love building homes--because of the relationships I form with my customers, employees, contractors, and associates. When I'm faced with a decision or an obstacle, I've found that the golden rule always leads me in the right direction. I simply treat my customers and my employees the way that I would want to be treated." Darin also loves the custom home building process. He says, "It's rewarding to join with a customer in the creative building process. What starts with just a few abstract ideas culminates in a finished custom home comprised of hundreds of unique and personal details. For me, it's more than waht we get at the finish, it's about how we get there."

About Stadler Custom Homes of Austin. Stadler has been building luxury homes in Austin and Central Texas since 1995. Recipients of numerous awards, they have been an active participant in Austin's explosive grow. Stadler strives to build homes that beautify Austin as well as add to the uniqueness of its neighborhoods. Stadler builds homes primarily in the West Austin and Lake Travis areas. You can see beautiful Stadler Custom Homes in desirable Austin neighborhoods such as Barton Creek, Spanish Oaks, Seven Oaks, Rough Hollow, Westlake, Tarrytown, Bee Caves, Spicewood, Lakeway, and many others. Both of Stadler's founders, Brent Allison and Todd McCullough, are fixtures in the community and plan to call Austin home for the rest of their lives. Brent Allison states, "That is why it's so important for us to build homes that make a lasting impression. We're building homes for our present and future neighbors."

Posted by Industrial-Manufacturing at 06:01 AM | Comments (0)

All Pro Trailer Superstore Launches Their New 'Call Ahead Trailer Package' Allowing Consumers to Select, Finance, Customize and Arrange Delivery of a New Trailer In One Easy Step

All Pro's new "Call Ahead Trailer Package" conveniently allows consumers to choose their Trailer Online, add additional Trailer Accessories if needed, receive on the spot Trailer Financing with the option of Trailer Delivery or Pick Up at their location in Mechanicsburg, Pennsylvania.

Mechanicsburg, PA (PRWEB) October 13, 2007 -- All Pro Trailer Superstore is not just an internet trailer dealer. All Pro has a 14,000 square foot facility with 2 acre's full of trailer inventory. "We consistently stock 400 plus trailers for sale at all times and our enclosed cargo trailers are fully customizable and can be individually built to meet your personal needs," remarks Jake Wagner, owner of All Pro Trailer Superstore.

"Our trailer sales department is top of the line and offers the most and best selection of trailers than any other trailer dealer in Pennsylvania," states Wagner "We are your one-stop trailer source, we inspect, repair, customize and finance trailers." All Pro's Trailer Sales Pa. facility is easily accessible from surrounding states, such as Maryland, Delaware, Virginia, New Jersey and New York.

All Pro's Trailer Superstore offers a broad product line of trailers for sale, including a full line of enclosed cargo trailers, enclosed car trailers and enclosed snowmobile trailers. "We are CarMate Trailers number one trailer dealer in the nation," states Wagner "And we are also a proud trailer dealer of Pace American Cargo Trailers, US Cargo Enclosed Trailers, Carry-On Trailers and our top of the line Thule Aluminum Trailers. We are Thule Trailers number one trailer dealer in Pennsylvania."

"We also stock an extensive line of equipment trailers, dump trailers, and landscape utility trailers by Cam Superline at our Trailer Superstore," remarks Wagner. "From heavy duty equipment trailers to heavy duty dump trailers, I am confident we will have the trailer to fit your needs and budget."

All Pro's newest line of Diamond C equipment trailers, utility trailers and ATV trailers are getting excellent reviews from their consumers. "Diamond C Trailers, out of Texas, build heavy duty trailers with a Texas flare to them," states Wagner. "We are having a hard time keeping them in stock, their quality is undeniable."

Visit All Pro Trailer Superstore's official website at www.allprowest.com to view hundreds of trailers for sale or call 800-622-7003 for more information or to take advantage of their convenient "Call Ahead Trailer Package" today

Posted by Industrial-Manufacturing at 06:00 AM | Comments (0)

AUSTIN NARI Hosts 5th Annual Tour of Remodeled Homes Journey to Beautiful American Getaways

AUSTIN NARI, central Texas chapter of the National Association of the Remodeling Industry is holding its 5th Annual Tour of Remodeled Homes, "Journey to Beautiful American Getaways," Saturday and Sunday, October 20 and 21 in the Greater Austin area. This is your personal passport to see stunning renovations and additions for a variety of home styles, many inspired by beautiful American getaways. The nine projects showcased include single room to whole-house remodels by award winning contractors.

Austin, TX (PRWEB) October 13, 2007 -- AUSTIN NARI, the local chapter of the National Association of the Remodeling Industry is holding its 5th Annual Tour of Remodeled Homes sponsored by Dupont Tyvek, Saturday and Sunday, October 20 and 21 from 12-6 p.m. Travel throughout the Greater Austin area and explore remodeling possibilities through the eyes of some of AUSTIN NARI's most talented remodelers.

This is your personal passport to see stunning renovations and additions for a variety of home styles, many inspired by beautiful American getaways. "What is most exciting about this year's tour is when you walk into a featured home you'll feel like you have traveled to some of the country's beloved vacation spots," said Stephanie Fitzharris, Tour Committee Chairwoman and president of The Faux Co. "It promises to be inspiring and displays some of the most unique interior finishes we've seen to date."

Projects include fabulous single room to whole-house remodels by award winning contractors. See spacious remodeled kitchens, family leisure and media rooms, outdoor entertainment areas, bathroom remodels and two-story additions. The showcased projects range from $80,000 up to over $1,000,000 in spectacular renovations by Masterpiece Remodeling & Design, Eric Harrison Builders, T.A. Todd Construction, Austin Creative Builders, Hacienda Construction, Realty Restoration, Marsh Vorspan Partners, Don Boozer Construction and CG&S Design-Build.

The tour features great new design and building techniques, custom hand-made cabinetry and creative use of reclaimed building materials, beautiful furnishings, green building technology and unique storage solutions.

Take a drive and visit a photographer's contemporary Rocky Mountain retreat in northwest Austin, step back in time by walking through a magnificent Frank Lloyd Wright-inspired renovation off City Park Road and tour an expansive Texas Tuscan villa in Georgetown with an atrium tower, guesthouse and outdoor pavilion.

Marvel at the handmade cabinetry and antiquities in a gorgeous west Austin bath that is Southern living at its finest, or take a trip to the King Ranch with a renovation designed around antique furnishings, including a bed that LBJ and Lady Bird slept in from the ranch. Drive up the road and warm up to a massive reclaimed stone fireplace, straight out of an Appalachian lodge with antique hand-made trusses and an ingenious gourmet kitchen.

Should you desire to "stay" close to home, visit the beautifully remodeled traditional Lake Austin estate with striking details and a new view of the water. Perfectly matched for the historic Austin neighborhood, it is a lovely second story addition and kitchen transformation not to miss. Finally, for the truly authentically Austin experience, stop over at the eclectic Clarksville cottage with gorgeous detailing and surprises in every room.

You may begin the tour at any home and tickets are available at each for $5.00 per home or $20 for all nine. For a map and more information, visit Home Tour Info or call 512-708-0637.

About AUSTIN NARI
AUSTIN NARI, a non-profit organization, is the central Texas chapter of the National Association of the Remodeling Industry. For over 30 years, the association (formerly the Austin Remodelers Association) has been assisting quality general contractors, subcontractors, suppliers, and related service providers as well as homeowners seeking remodeling information. AUSTIN NARI has access to the latest industry news and state-of-the-art developments through regular meetings, advice and training by experts in their field, publications and networking events.

Tour Sponsors:

DuPont Tyvek
Don Boozer Construction, Inc.
Davis & Wilkerson, P.C.
Realty Restoration
ProSource Wholesale Floorcoverings
Katz Builders, Inc.
Grand Openings, Inc.
Factory Builder Stores
Artisan Hardwood Floors
American Light
Austin Design Guide
CG&S Design-Build
Davis & Wilkerson
Dawn Hearn Interior Design
National City Mortgage
Schroeder Carpet & Drapery
The Faux Co.

Posted by Industrial-Manufacturing at 06:00 AM | Comments (0)

360 Interchange Signs Marketing Agreement with Living with Ed

360 Interchange, an emerging company focused on ecoSolutions™, is teaming up with the hit 'green-reality' show, Living with Ed to promote its sourcing, developing, marketing and sales services for eco-friendly materials and finished goods.

Ashland, Oregon (PRWEB) October 13, 2007 -- 360 Interchange, an emerging company focused on ecoSolutions™, is teaming up with the hit 'green-reality' show, Living with Ed to promote its sourcing, developing, marketing and sales services for eco-friendly materials and finished goods.

360 Interchange, Inc. has signed a long-term exclusive brand license and endorsement agreement with the producers of the hit TV show, Living with Ed and the show's co-star Ed Begley Jr., which airs on Home and Garden Television (HGTV). Under the terms of the agreement, 360 Interchange will use the show's trademark and Begley's endorsement to market its eco-friendly foam and PVC replacement, ecoFoam™. Additionally, 360 Interchange will be marketing its ecoFitness™ and sustainable flooring lines of finished products utilizing Begley and the Living with Ed brand, with the ability to add products and materials as the company's scope increases. Begley has also taken an advisory board position with the company.

360 Interchange's ecoFoam™ is a direct replacement for PVC, and other plastics, that can enter production today utilizing most of the same equipment already in use in factories producing goods from other, more toxic materials. ecoFoam™ requires no heavy metals in production, such as lead; contains no chlorine or phthalates; does not give off toxic fumes, even when burned; and is 100% recyclable and degradable.

Many of the company's ecoFitness™ products are made from ecoFoam™, such as yoga mats that have superior performance to standard PVC mats without the toxic fumes and plasticizers that are associated with that material. 360 Interchange also markets and sells sustainable flooring products such as mature harvest, low/no-VOC bamboo and solid and hardwood products certified by the Forest Stewardship Council (FSC) into large retail and distribution channels throughout North America.

"We are so pleased to be working with Living with Ed and Ed Begley Jr.," said Vice President of Marketing & Business Development, Josh Bradley. "Ed has really acted as an inspiration to millions of people with his personal commitment to the planet and sustainable living. He, in conjunction with his TV show, exemplifies what is possible with everyday lifestyle choices. That is how we will make great strides to protect our planet, when we individually and collectively start making smarter decisions in our lives."

The marketing relationship will be launched efforts with the redesign of 360 Interchange's web site, www.360interchange.com, to be unveiled next week, on-line video materials featuring Begley and appearances by him for key trade shows.

About Living with Ed
Living with Ed features Emmy-nominated Ed Begley Jr. and his wife Rachelle Carson as they balance the Hollywood lifestyle with environmentally-conscious living. The critically acclaimed show has been a great success for HGTV, entering its second season as the series to watch for the ecologically minded. The show airs Mondays at 10:30 p.m. ET/PT.

About 360 Interchange
360 Interchange, Inc. was founded in 2004 by Bill Patridge anticipating the significant growth in high-quality, low cost production of goods in China. The company offers ecoSolutions™, a unique strategy to focus on sourcing, developing, marketing and selling eco-friendly products and materials to high-volume customers for some of the largest industries in the world. 360 Interchange is working to partner with manufacturers and buyers worldwide to find, develop and market new products that replace some of the most wide-spread, damaging materials in use today.

Posted by Industrial-Manufacturing at 05:59 AM | Comments (0)

Online Enquiries Go Through the Roof for Interior Fit Out Company Thornton Projects, After Online Advertising Agency AdStorm Optimizes their AdWords Online Advertising

Advertising agency AdStorm achieves excellent online advertising results for Thornton Project Solutions.

Lichfield, UK (PRWEB) October 13, 2007 -- Advertising agency AdStorm (www.adstorm.co.uk) achieves excellent online advertising results for Thornton Project Solutions (www.thorntonprojects.co.uk).

Thornton Project Solutions is an experienced Interior Fit Out company, providing services for the retail, leisure and commercial sectors. As part of their ambitious drive to grow to a £20m turnover fit out company within 2 years, they appointed advertising agency AdStorm (www.adstorm.co.uk) to develop a variety of marketing resources aimed at generating new sales opportunities. The program included a new website, Search Engine Advertising with Google AdWords, and optimisation of the web site to perform well in organic search.

The AdStorm agency developed a completely new Interior Fit Out website -- www.thorntonprojects.co.uk -- that would provide the very best possible end-user experience, designed to achieve the highest possible conversion of visitors into valuable sales enquiries via its Fit Out Quote Form at www.thorntonprojects.co.uk/fit-out-quote.php. AdStorm also implemented Google Analytics on the new website in order to measure cost per acquisition of new customers against different keywords and advertisers, to facilitate future optimisation of the advertising program. Crucially, from an optimisation point of view, the website was designed to channel genuine sales leads differently from other enquiries, so that leads could be accurately measured and the data used for future advertising optimisation.

Gary King, Managing Director of Thornton Projects comments, "The initial advertising showed good results. Enquiries began coming in and within a few weeks we were quoting on a £350,000 job. That job alone would pay for an entire year's advertising."

Following a few months advertising, the AdStorm agency had gathered enough data to begin its advanced optimisation. Using the data gathered from Google Analytics, advertising spend was focussed on the ads that performed better, and diverted away from poorer performing keywords and adverts. Ads were optimised to improve their Google quality score, and bids were optimised to generate the maximum possible clickthrough for TPS's advertising budget. New ads were also created for niches that had been spotted in the intervening months, and ads were also tailored to encourage the right kind of enquiries that suited TPS, and to discourage unwanted clicks.

As a result of the PPC advertising optimisation, the already healthy number of leads increased dramatically. Gary King commented, "In 20 years in the industry, I have never known an interior fit out company receive so many enquiries. They are coming in one or two per day and we are now hiring an additional Business Development Manager. Having more leads we are also now better able to prioritize the leads we follow up, so we can dedicate our valuable resources on chasing the more profitable opportunities.

"Thanks in no small part to AdStorm and their expertise in online marketing we are well on target to achieve our very ambitious goals," Gary added.

The Thornton Project Solutions web site, providing details of their Interior Fit Out solutions for gyms and other sectors can be visited at http://www.thorntonprojects.co.uk.

AdStorm's Google Qualified Status can be seen here: https://adwords.google.com/select/ProfessionalStatus?id=C2UEE5rbADxAA2P1PcXwng.

AdStorm advertising agency web site can be visited here: www.adstorm.co.uk and the agency's marketing agency website can be visited here: www.precismarketing.co.uk.

Posted by Industrial-Manufacturing at 05:59 AM | Comments (0)

October 12, 2007

American Log Mortgage Announces Innovative Spec and Model Home Financing Program

Jim Deitch, Founder and CEO of American Home Bank, said, "Our new spec financing program was developed in response to the needs of log builders, manufacturers and dealers." Deitch continued, "Builders know that showing their log homes is the quickest way to making a sale. When consumers see the quality construction, features and security of a log home model, they are more inclined to move ahead with a purchase. Model and spec home availability increases the speed and volume of sales."

Mountville, PA (PRWEB) October 12, 2007 -- American Home Bank (AHB) has introduced a new lending program through its American Log Mortgage Division. The program will provide financing for model and spec homes. It was specifically created for the log home industry.

Jim Deitch, Founder and CEO of American Home Bank, said, "Our new spec financing program was developed in response to the needs of log builders, manufacturers and dealers." Deitch continued, "Builders know that showing their log homes is the quickest way to making a sale. When consumers see the quality construction, features and security of a log home model, they are more inclined to move ahead with a purchase. Model and spec home availability increases the speed and volume of sales."

Features of the program include up to 100% financing of hard costs, and in some cases the ability of consumers to convert the spec financing into an assumable mortgage or end loan financing for their log homes.

"This product speaks directly to the log home industry," commented Doug Groff, President of American Log Mortgage and a member of NAHB's Building Systems Councils. Groff added, "Builders and manufacturers were continually asking us about financing for log show homes and spec homes. This program reflects our ongoing commitment to the log industry. Spec financing was a logical next step."

One reason that spec, model and show homes are so important to the industry is to reinforce the message about the quality of systems-built homes. And, although the industry is growing quickly, there is still much work to be done in this area. Jeremy Bertrand, Executive Director of the NAHB's Building Systems Councils is proud of the extremely high quality of systems-built homes. "Consumers are blown away after walking through new systems built homes and experiencing the quality, beauty and soundness of these structures. Their perceptions beforehand are easily changed once they see the homes firsthand. One of our main goals in the systems built industry is showing consumers the great quality and value of these homes," concluded Bertrand.

American Home Bank anticipates that offering this unique financing will not only help educate consumers about log homes, but will help builders, dealers and manufacturers sell more homes. "Seeing is believing when it comes to log homes, concluded Groff. With this program, we are helping make that possible."

American Home Bank is a National Bank providing retail, wholesale, correspondent and joint venture mortgage solutions. The Bank specializes in Construction to Permanent and Residential Mortgage Lending and offers products from over a dozen national sources. Joint ventures with builders, manufacturers and dealers are created through Builder's Total Control, a turnkey mortgage company solution that can be up and running in about 30 days. American Log Mortgage and American SystemBuilt Mortgage, other divisions of American Home Bank, were created to meet the special needs of the systems-built industry and provides builders, manufacturers and dealers with a high level of products and services designed specifically for that industry. For more information about American Log Mortgage, contact Doug Groff at 877-Bank-AHB or visit the Bank's website at www.americanlogmortgage.com.

Posted by Industrial-Manufacturing at 06:25 AM | Comments (0)

Housing Conference Receives Record Support

The annual event, put on by the Building Systems Councils (BSC) of the National Association of Home Builders is welcoming record support this year. Exhibit space and sponsorship programs have sold out, with even more potential exhibitors on waiting lists. Registration is even at levels not seen since 2000. NAHB figures show that 2007 will probably end up with 1.3 million housing starts. Interest rates are still at an all time low. Not the lowest, but 80% lower than in the past 30 years."

Washington, DC (PRWEB) October 12, 2007 -- If you believe everything you read, you may think that the housing industry is deteriorating at record-breaking speed. In actuality, what's record breaking is the interest that the upcoming SHOWCASE housing conference is receiving. The annual event, put on by the Building Systems Councils (BSC) of the National Association of Home Builders is welcoming record support this year. Exhibit space and sponsorship programs have sold out, with even more potential exhibitors on waiting lists. Registration is at levels not seen since 2000.

The Councils within the BSC represent the concrete, log, modular, and panelized home building companies, all of which build homes that are either pre-constructed or pre-fabricated in a factory or mill. This segment of the housing industry represents a growing slice of residential construction across the country, so it's no surprise that this conference has generated so much interest.

The SHOWCASE event is being held this year in Hilton Head, SC, at the Marriott Hilton Head Beach and Golf Resort, October 28-31. In addition to the exhibitors, attendees will have the opportunity to network with leading systems-built companies from across the country. In addition, attendees will also be able to attend a variety of seminars, tour a state-of-the-art panelized facility and a number of leading housing developments and model homes.

The programs planned for this year are diverse and plentiful, and include sessions on topics such as being successful in the current housing market, improving workforce skills, how to design and implement building programs, the green movement, and many more. Keynote speaker and acclaimed author Bill Webb will share some of the secrets of his success, and Dave Seiders, NAHB Chief Economist, will report on housing trends and market conditions. Other speakers on the agenda include Mike Luzier, President & CEO of the NAHB Research Center on "Systems Built Goes Green", Jerry Rouleau of J. Rouleau & Associates, LLC on "How To Use New Technologies To Increase Sales", Hal Von Nessen of RESH Marketing on "The Secret to Success" and other speakers, who will be discussing various housing related topics.

NAHB Building Systems Councils Chair Rob Cantrell of Stonemill Log Homes is excited about the popularity of this event, but not too surprised. "Even though housing starts have dropped," says Cantrell, "Many builders are looking at the housing starts numbers as finally getting back to normal. Housing starts were so good for so long, a lot of people forgot what normal was. NAHB figures show that 2007 will probably end up with 1.3 million housing starts. Interest rates are still at an all time low. Not the lowest, but 80% lower than in the past 30 years."

Information on the Building Systems Council and this years SHOWCASE event can be found on their website: www.buildingsystems.org or by calling 202-266-8676.

Additional data and photos are available upon request.

Posted by Industrial-Manufacturing at 06:24 AM | Comments (0)

elearning-training.com Wins Cooling Industry Award

The Cooling Industry Awards, Britain's symbol for successful and environmental cooling, was awarded to Star Refrigeration for the success of elearning-training.com for its international achievement as a groundbreaking Training Provider for the HVACR Industry.

Glasgow, UK (PRWEB) October 12, 2007 -- elearning-training.com, the pioneering elearning initiative of Star Refrigeration, focusing on air conditioning and refrigeration training, received the Cooling Industry Award for the training initiative of the year 2007. A gala dinner brought the industry together to celebrate the achievements of those at the forefront of the Refrigeration and Air Conditioning Industry.

2007-10-12


Home
Learn More
Release Features
Success Stories
Search Archives
PRWeb Direct
Submit Release


Industry Categories
News by Country
News by MSA
Todays News
Browse by Day
PR Trackbacks™
ViewNews™
eBook Digests
RSS



Close Move
All Press Releases for October 12, 2007 Subscribe to this News Feed




elearning-training.com Wins Cooling Industry Award

The Cooling Industry Awards, Britain's symbol for successful and environmental cooling, was awarded to Star Refrigeration for the success of elearning-training.com for its international achievement as a groundbreaking Training Provider for the HVACR Industry.

Glasgow, UK (PRWEB) October 12, 2007 -- elearning-training.com, the pioneering elearning initiative of Star Refrigeration, focusing on air conditioning and refrigeration training, received the Cooling Industry Award for the training initiative of the year 2007. A gala dinner brought the industry together to celebrate the achievements of those at the forefront of the Refrigeration and Air Conditioning Industry.

real world solutions that address today's needs
The Cooling Industry Awards, organised by RAC Magazine, took place on the evening of the 3 October at the Royal Lancaster Hotel in London. Comedian Dara O'Briain introduced the winners for the twelve different categories including elearning-training.com as the winner of the award for the Training Initiative of the Year sponsored by Hitachi Europe.

The judges unanimously agreed that elearning-training.com "Transforms the process of training, giving the student the ability to learn anytime, any place, anywhere - and master the core principles quickly".

elearning-training.com was launched in September 2006 by Star Refrigeration as a pioneering e-learning training initiative for the Heating, Ventilation, Air Conditioning and Refrigeration Industry, offering a learning solution that makes training easier, more effective and more convenient to all.
In only twelve months, elearning-training.com has built an international student community of more than 1500 members and has now been updated to include an improved Learning Management System that will be home to the World's No.1 virtual gateway for Air Conditioning, Heating, Ventilation and Refrigeration training and reference material.

After collecting the award, Graham Stuart, Managing Director - Operations said "This award recognises the great value of a 21stCentury web-based training solution that offers everyone the potential to be lifelong learners regardless of location, age or job title. This flexible learning platform enables students to work towards their preferred course at their own pace and ability.

elearning-training.com is gathering a momentum at a rapid pace. The list of future priorities and plans is growing rapidly and promises even more success for the coming years."

Star Refrigeration was also the recipient of two more awards; the Environmental Pioneer - Refrigeration (Sponsored by Marks and Spencer) and the Gold Award (sponsored by Climate Center) in recognition of excellence in leadership and performance.

The judges praised Star Refrigeration accomplishments saying: "Where others have been content to go with the flow and work with existing technology, Star Refrigeration has been consistently creative and unorthodox, coming up with a seemingly endless stream of new ideas and fresh approaches. Its inventiveness and curiosity is coupled with the highest levels of professionalism, delivering new solutions that not only work -- but could become the industry mainstream for the future."

As an environmental pioneer Star Refrigeration has developed over the years "real world solutions that address today's needs" according to the judges. The company has pioneered on the technology front with a raft of product developments harnessing friendlier technologies. Star has played a leading role in the development of carbon dioxide refrigeration in the UK and overseas, and it continues to innovate focusing on today's environmental issues.

A full list of nominees and winners can be found at the Cooling Industry Awards website: coolingindustryawards.com

The Star Refrigeration Group

elearning-training.com is backed by the resources and expertise of The Star Refrigeration Group. Founded in 1970, the Group maintains a worldwide reputation built on quality, reliability and sound technical innovation and has successfully delivered products and services to its customers to over 50 countries. The SRG operates in five global business sectors: - Refrigeration Engineering (Star Refrigeration); Industrial Freezing and Chilling Systems (Starfrost); Electrical Engineering (Penec); Technical Consultancy (Star Technical Solutions); and Learning (elearning-training.com).

For more information visit http://www.elearning-training.com
For further information about this project, please contact:
Contact name: Astrid Prado
Contact telephone: +44 (0) 141 638 7916

Posted by Industrial-Manufacturing at 06:23 AM | Comments (0)

Kings House Business Centre Refurbishment by Maddison Business Systems is Sellout Success

Kings House Business Centre converts former Astra Zeneca training centre to sell out managed office suites and open areas with furnishing solutions from Maddison Business Systems.

Pitstone, Bedfordshire, UK (PRWEB) October 12, 2007 -- Kings House Business Centre converts former Astra Zeneca training centre to sell out managed office suites and open areas with furnishing solutions from Maddison Business Systems.

When Anthony Moss, managing director of the recently opened Kings House Business Centre in Kings Langley, Hertfordshire, UK, was considering how to furnish the business needs and open areas, uppermost in his mind was the need to create precisely the right sort of environment for the businesses he hoped to attract. Moss wanted the look and feel to be uniquely different to other business centres in the area, and provide a facility that would help his clients create a quality working atmosphere, and impress visitors.

King's House sought Maddisons advice on suitable design and furniture approaches, and after discussions covering creative ideas and product selections from a choice of quality reception, office, and open area solutions, Maddisons received the contract.

Maddisons visited a number of the local serviced office providers to get an idea of the competitive standards. Working with a Kings House appointed designer, John Eldsworthy, Maddisons first brought in their CAD design services to model each of the offices and spaces that required furnishing. The advantage of the CAD services lay in their ability to pre-model and visualise how furnishings, layouts and colours would appear prior to the rooms being fitted out.

Next, Maddisons selected solutions from their range to provide an impressive reception area, trapezoidal table and chairs solutions for training rooms, to allow fast reconfiguration for workshops and seminars.

For focus rooms and individual offices, ergonomic workstations, desks and chairs, within a creative stimulating environment, were selected, and in the breakout areas, good-looking and comfortable leather seating was provided.

Dining facilities were a highlight, designed to a bistro/cafe theme complimenting the unique 72 seat multi media theatre, and a stylish up market concept adopted for the meeting table and chairs in the boardroom. The bistro required wooden flooring, and Maddisons worked with local flooring contractor CRC Flooring of Kings Langley, to complete this part of the project.

Total contract value was over £100,000, and clearly Kings House's clients liked the result, because the premises are usually fully occupied, and were sold out almost from the start!

Commenting on the work undertaken by Maddisons, Anthony Moss stated: The building was acquired in December 2006, having been empty for over four years, it needed a complete refurbishment. However with Maddison Business Systems support all the individual offices, breakout and reception areas were fully designed, furnished and operational, allowing us to move into Kings House at the end of March.

With such a tight schedule including the ordering of a special reception counter MBS and Tony Maddison worked wonders. Their fitters worked around the clock to insure that were open for business on 2nd April 2007.

Tony Maddison, joint MD, Maddisons Business Systems added " it was an interesting project for us, because we had a free rein to offer all of our creative services, our design skills, and top of the range solutions, to come up with a furnishing solution that was attractive, welcoming and practical."

For more information:

Kings House Business Centre:
Kings House Business Centre provides modern and flexible Serviced and Virtual offices to impress. The Jewel of the Centre is a 72 Seat Multi Media Theater for corporate events; in addition there are State of the Art, Viewing and Meeting Rooms with Conference facilities and on Site Catering.

Maddison Business Systems:
Maddison has been providing stylish furnishing solutions to businesses, adding value by delivering customised projects that are professional, flexible, focused on creating comfortable and productive environments, and compliant with evolving health and safety regulations. In business for almost 10 years, the company continues to develop and provide forward-looking furnishing solutions to help clients create stylish, productive and healthy working business environments.

Madd