Aerospace - Defense: November 2005 Archives

September 2006
Sun	Mon	Tue	Wed	Thu	Fri	Sat
					1	2
3	4	5	6	7	8	9
10	11	12	13	14	15	16
17	18	19	20	21	22	23
24	25	26	27	28	29	30

« October 2005 | Main | December 2005 »

November 30, 2005

WNYW’s SKYFOX is First HD News Helicopter in New York Market

WNYW-FOX5 is proud to announce the addition of the most powerful and fastest news helicopter in the New York market. The first of its kind, SKYFOX is an American Eurocopter ASTAR B2 and makes FOX5 the leader in airborne technology.

New York, NY (PRWEB via PR Web Direct) November 30, 2005 -- WNYW-FOX5 is proud to announce the addition of the most powerful and fastest news helicopter in the New York market. The first of its kind, SKYFOX is an American Eurocopter ASTAR B2 and makes FOX5 the leader in airborne technology.

"The innovative multi-format design of this helicopter and new HD capability from the Cineflex camera system will serve as a vital bridge that will allow us to provide improved service to our standard definition viewers while providing unequaled quality for those with HD receivers," said Lew Leone, vice president and general manager of WNYW-FOX5.

"We're proud that FOX5 came to Helinet for their aerial news gathering needs," said CEO of Helinet Aviation, David Calvert-Jones. "We have provided FOX5 with the best aircraft and high definition camera system on the market, assuring that FOX5 stays ahead of the curve and at the forefront of aerial journalism."

SKYFOX is totally equipped with state-of-the-art technology and high-definition capabilities, including the Cineflex HiDef HD camera system and multiple band microwave abilities. The advanced electronics systems in place in SKYFOX allow multifunctional HD capabilities that are not available in any other aircraft; resulting in increased detail up to three times that of standard broadcast resolution and increased news coverage. SKYFOX utilizes the same HD technology as the LAPD, which provides FOX5 with the ability to get closer to a story than any of its competitors. The SKYFOX helicopter is provided by Helinet Aviation Services and its state of the art design is custom tailored by Helinet’s engineering branch, Geneva Aviation.

"Being able to capture and broadcast live, high definition images from the air is the most significant development in airborne news gathering in many years,” said FOX5’s airborne reporter, Kai Simonsen. “SKYFOX HD is the most flexible helicopter I have ever flown in. Because of its state of the art design, I have access to numerous video, audio, and communication sources in a configuration that I can tailor to my own needs by the flip of a switch.”

The Helinet/Cineflex HiDEF camera system, which is built around the Sony HDC-F950 camera, is the lightest, most compact fully digital camera platform in the world. With its light weight, at just 67 pounds, the Cineflex HiDEF platform is significantly lighter and more compact than existing film-based systems and more powerful in its pan, tilt and zoom capabilities. The Cineflex HiDef camera system provides up to three times more detail than standard broadcast resolution and has enhanced zoom capabilities allowing, for example, a license plate to be read from thousands of feet away. This is the same camera system that was used in the critically acclaimed film Domino and the soon to be released Miami Vice.

WNYW-FOX5 is one of two FOX owned-and-operated stations in the nation’s No. 1 TV market – New York City – and is also broadcast via DIRECTV on JetBlue Airways. Fox Television Stations, Inc. is one of the nation's largest owned-and-operated network broadcast groups, and consists of 35 stations in 26 markets covering nearly 45% of U.S. television homes.

About Helinet Aviation Services
Helinet Aviation Services is an international provider of aviation services to a diversity of markets. The company is recognized as one of the nation's top electronic news gathering (ENG) aerial solutions providers. In addition, Helinet regularly flies heads of state, celebrities and Fortune 500 executives, and transports patients in need of specialized care and life-saving organs to hospitals. Another facet of Helinet's business model is its entertainment division, Helinet Cinema Solutions, a turnkey provider for the most challenging aerial shots and stunts for Hollywood's top films and commercials.

For additional technical information on FOX5’s SKYFOX HD helicopter, please contact Brian McWilliams of Spelling Communications at 310.477.9500 or Brandii Toby of FOX5 at 212.452.5881.

Posted by Industrial-Manufacturing at 02:41 AM | Comments (0)

Homeland Security Official Justin Oberman to Join Crestview Capital Funds

Justin P. Oberman, Assistant Director of the Transportation Security Administration, U.S. Department of Homeland Security, will join the firm as the senior analyst focused on homeland security, transportation and other related industries.

Northbrook, IL (PRWEB) November 30, 2005 -- Crestview Capital Funds announced that Justin P. Oberman, Assistant Director of the Transportation Security Administration, U.S. Department of Homeland Security, will join the firm as the senior analyst focused on homeland security, transportation and other related industries. Oberman announced that he will leave TSA next month.

“We are proud to have attracted such a high-ranking and experienced homeland security official,” said Stewart Flink, Managing, Co-founder of Crestview Capital Funds. “Justin's experience in helping to create TSA in the wake of 9/11, and his management of a key component of the agency over the last two years, give us the breadth and depth to effectively evaluate investment opportunities, and add value to our portfolio companies. We look forward to his contributions in homeland security, transportation, and other areas related to public policy.”

Oberman will review companies' business plans and suitability for investment, and assist in developing and executing strategies for growth for Crestview's holdings. In this role, he will help the firm broaden its portfolio while managing risk and upside in the still-emerging homeland security industry.

Mr. Oberman stated, “I am eager to join Crestview's team because it provides a sound platform to support the needs of the homeland security and transportation industries while creating value for our investors. The firm sees numerous opportunities every day, has holdings in growing companies, and is receptive to evaluating new opportunities. I am honored to have been at TSA for more than four years, and now look forward to a return to the private sector.”

At TSA, Oberman heads the Office of Transportation Threat Assessment and Credentialing, where he is responsible for the agency's programs to identify known or suspected terrorist threats seeking access to the transportation system. These programs cover the commercial aviation, general aviation, trucking, and maritime industries.

About Crestview Capital Funds
Crestview Capital invests in small cap public companies in the health care, technology and energy sectors that seek capital for growth, while generating strong returns for individual investors. The company offers investors an opportunity to participate in private investments in public companies (PIPES). Crestview Capital has completed over 70 investments and has more than 90 different deal sources in the US and Western Europe.

Crestview Capital Partners, LLC ("Crestview Capital")

This site may contain forward looking statements or information regarding funds or other investment vehicles. The material contained on this site is believed to be accurate at the time it was posted, but is provided to users "AS IS" without any express or implied warranty as to availability, reliability, merchantability, non-infringement, accuracy, completeness, timeliness, fitness for a particular purpose or otherwise. No solicitation of any kind is conducted through this site. Interested parties or purveyors of this site are not to construe such language or the contents of this site as investment, legal, or tax advice. Furthermore, such parties should consult their professional advisors on the potential tax and other legal consequences of subscribing for, purchasing, holding and selling any interests under the laws of any jurisdiction to which they are subject and the investment risks associated with such interests. The information on this site does not constitute an offer to sell or a solicitation of an offer to buy any interests in any of the described investment funds nor shall there be any sale of any interests in any jurisdiction in which such offer or solicitation is not authorized or to any person to whom it is unlawful to make such offer or solicitation. This Website and its contents are the property of Kingsport Capital.

Posted by Industrial-Manufacturing at 02:39 AM | Comments (0)

SENTEL Makes Big Leap in Sensor Integration With MicroRDR; SENTEL’s Micro Remote Data Relay Delivers Security Innovation in a Compact Package

SENTEL Corp., a premier engineering and software company, is launching a lighter, smaller, portable sensor integration technology with its Micro Remote Data Relay system (MicroRDR).

ALEXANDRIA, VA (PRWEB) November 30, 2005 -- SENTEL Corp., a premier engineering and software company, is launching a lighter, smaller, portable sensor integration technology with its Micro Remote Data Relay system (MicroRDR).

“This is the iPod of sensor networking,” said James F. Garrett, president of SENTEL. “It’s peace of mind and security in the palm of your hand.”

The MicroRDR is a compact smart networking tool designed and built by SENTEL that monitors and controls numerous sensors, including those that can detect radiological, biological, chemical and other toxic agents – simultaneously. The sensors can protect and warn the public in the event of a terrorist attack so anyone exposed to a toxic agent can receive immediate treatment.

The compact and lightweight MicroRDR can be deployed in stadiums, subway systems, airports, hotels, offices, shopping malls, theaters and wherever security is a priority. It’s just 3.1 inches wide and 6.7 to 12.5 inches long, depending on the model. It weighs as little as 10 ounces, so it can be deployed in innovative ways, including being mounted in security vehicles or strapped to personnel. Rugged enough for indoor, outdoor and mobile use, the MicroRDR unit has no moving parts and is weather resistant, operating in temperature extremes of minus-40°F to 130°F.

“The MicroRDR allows us to interconnect monitoring devices that detect physical security threats or chem/bio/rad hazards remotely,” said Ray Babineau, vice president of the Technology Integration Group at SENTEL, a division of Dimensions International Inc. “The MicroRDR speaks with all the disparate devices and then fuses their data, taking all that raw data from the various sensors and devices and turning it into actionable information – information that someone can do something with.”

In addition, the MicroRDR can be used with security cameras, motion detectors and any other kind of sensor. “With this technology, we can control camera positions remotely,” Babineau said.

Available in wireless and Ethernet models, the MicroRDR – and its big brother, the standard RDR – provide innovative, scalable and cost-effective solutions for connecting disparate, remotely located sensors and other electronic devices into one integrated network. Each sensor’s output can be monitored and controlled at a central location using SENTEL’s RDR Command Post (RDR-CP) software. More than 40 RDRs and MicroRDRs can be connected to just one RDR-CP, creating a network of hundreds of remote devices.

The RDR and MicroRDR are ideal for organizations, such as the Departments of Defense and Homeland Security, and businesses because it’s incredibly flexible and adapts to changing technology. When an organization upgrades its technology, the RDR infrastructure remains and works with that technology. For example, if a new type of sensor is developed, it would still work with the RDR and the infrastructure already in place.

“It’s a win, win for everyone on all levels,” Garrett said. “SENTEL’s clients can still take advantage of changing technology without having to go back to the drawing board – a costly proposition – because our RDR’s system integration is innovative, flexible and scalable.”

SENTEL is a division of Dimensions International. SENTEL provides mission-critical support to the Department of Defense, DHS, FAA and other government agencies in the areas of chemical and biological agent defense, software development, electromagnetics engineering and test and evaluation. SENTEL’s innovative Remote Data Relay (RDR), a sensor networking system, is among its leading products. The RDR, with its new PDA capabilities, is a smart networking tool designed and built by SENTEL that can simultaneously monitor and control numerous, disparate sensors that detect, nuclear, biological, chemical and other toxic agents. Please call SENTEL at 703-739-0084 or visit http://www.sentel.com/

Dimensions International's core business areas include information technology, integrated logistic support and air traffic control systems providing advance technology in command and control systems, electronic commerce/electronic data interchange, radar global positioning systems, warehouse management and material distribution systems to government and commercial clients. Founded in 1985, DI continues to provide innovative solutions to its clients, which include the U.S. Army, Navy, Air Force, Marine Corps, Coast Guard and other Department of Defense agencies, FAA, USAID and the District of Columbia government. DI is an international company with staff offices in more than 50 cities in the United States and worldwide. For more information, call DI at 703-998-0098 or visit http://www.dimensionsinternational.com.

Posted by Industrial-Manufacturing at 02:38 AM | Comments (0)

SportairUSA Pioneers With Yet Another First -- Light Sport Aircraft (LSA) Airbag Restraints; Will Showcase StingSport at Camarillo CA EAA Sport Pilot Tour

SportairUSA LC, North American distributors of Light Sport Aircraft (LSA), announced another industry first -- availability of airbag restraints on an LSA. This week, SportairUSA’s StingSport became the first LSA to incorporate the AmSafe Aviation Inflatable Restraints (AAIR) system into its aircraft safety features.

Little Rock, AR (PRWEB) November 30, 2005 -- SportairUSA LC, North American distributors of Light Sport Aircraft (LSA), announced another industry first -- availability of airbag restraints on an LSA. This week, SportairUSA’s StingSport became the first LSA to incorporate the AmSafe Aviation Inflatable Restraints (AAIR) system into its aircraft safety features.

The AAIR is a self-contained modular restraint system designed to improve occupant protection from serious head impact injury during a survivable aircraft accident and enhance the occupant’s ability to exit the aircraft. The AAIR system (http://amsafeaviation.com/inflatablega.htm), manufactured by AmSafe Aviation, performs essentially the same as conventional seatbelts.

“The AAIR system delivers a progressive new approach in which the airbag restraints deploy away from the occupant instead of towards them” cites Bill Canino of SportairUSA. “We are quite impressed with the years of research and development and rigorous testing of the AAIR system and believe its addition to our safety feature portfolio greatly enhances StingSport pilot and passenger safety.”

The AAIR system joins a Ballistic Recovery Parachute System and over 30 safety based features to augment StingSport occupant protection. Adds Canino, “SportairUSA upholds a never-ending commitment to customer safety and will continue to evaluate and implement new features with safety as our primary goal.”

StingSport, the premier performance, best-equipped and safety conscious value in sport aircraft will headline this Saturday’s EAA Sport Pilot Tour aircraft exhibit at the Camarillo Airport (CMA) in California. Sport aircraft enthusiasts are invited to experience the SLSA certified StingSport first hand at the EAA sponsored event this Saturday December 3rd, call 1-866-FLY-STING or visit http://sportair-usa.com/stingprices.htm for more information. Additional information on the EAA Sport Pilot Tour can be found at http://sportpilot.org.

SportairUSA distributes exceptional international sport aircraft via an unparalleled regional sales and service dealer network throughout North America.

Posted by Industrial-Manufacturing at 02:36 AM | Comments (0)

November 29, 2005

U.S. Army Corps of Engineers Chooses DRI Consulting for Leadership Training and Development Contract

DRI Consulting, a renowned organization and management consulting firm, today announced their acquisition of a prestigious leadership training and development contract with the U.S. Army Corps of Engineers (USACE).

Minneapolis, MN (PRWEB via PR Web Direct) November 29, 2005 -- DRI Consulting, a renowned organization and management consulting firm, today announced their acquisition of a prestigious leadership training and development contract with the U.S. Army Corps of Engineers. Competition for the contract was extremely intense, with dozens of consulting firms from around the nation submitting bids.

The United States Army Corps of Engineers (USACE) is comprised of civilian and military engineers, scientists, and other specialists who work to contribute to the public good by meeting national security, environmental, and emergency requirements. As part of successful succession planning, the Corps has chosen to work closely with DRI Consulting to develop leadership training programs that will prepare both young and experienced engineers and scientists to take on positions of greater responsibility in the future.

“We are very excited to have the opportunity to work with such an elite group of dedicated professionals,” said Victoria M. Littlefield, Ph.D., Director of Public Sector Relations with DRI Consulting. “It is our goal to help the Army Corps Engineers develop leadership skills that complement their technical expertise and enable them to perform to their fullest potential within their industry.”

DRI Consulting’s foundation of psychology-based services solves show-stopping problems, enhances performance, improves work team satisfaction, and increases each organization’s overall profitability and effectiveness. By assessing leadership skills and styles, DRI consultants develop and deliver team and group leadership excellence training and coach individuals in developing leadership action plans tailored to their specific needs.

In addition to providing leadership training and development, DRI Consulting offers organization development, work team facilitation and teambuilding, organization and customer surveys, selection and staffing assessment packages, career coaching, personality profiling, and other services customized to help clients best meet their objectives. To learn more about DRI Consulting’s specialized programs and services visit http://www.dric.com

DRI Consulting’s proven executive leadership development program and consulting has benefited nearly 10,000 people over the last 20 years. Every staff member is highly experienced in consulting to a wide variety of organizations, businesses, and corporations. They work with the country’s top organizations including Target, 3M, Wells Fargo, Radio Shack, General Mills, Honeywell, the University of Minnesota and numerous others.

Media Contact:
John Fennig
651-415-1400

Posted by Industrial-Manufacturing at 02:15 AM | Comments (0)

Troux Technologies Demos Powerful EA Client Tools for DoDAF at CISA

New Metis™ Desktop 5.1 for DoDAF Template 1.1 squeezes costs from redundant IT systems, supports collaboration between military decision makers to strengthen warfighter programs.

OMAHA, NEBRASKA, CISA World Wide Conference --November 29, 2005 -- Troux Technologies, the global leader in IT Governance and Enterprise Architecture solutions, today announced significantly improved support for DoDAF products in its Metis Desktop 5.1 for DoDAF (Department of Defense Architecture Framework) Template 1.1. With the new DoDAF implementation, leveraging the award-winning visual modeling platform Metis by Troux, enterprise architects in the DoD and systems integration firms can more cost effectively build systems that achieve interoperability across DoD groups. This improves decision making, promotes resource efficiency, and reduces operational costs.

Highlights of the announcement include an SV8 living timeline, 'capability' object types integrated into the underlying metamodel for improved warfighter support, and standardized reference models that are reusable across multiple architectures.

“With our expanded set of Metis client tools for DoDAF, we provide rich EA support for IT and business decision makers in the DoD as they fulfill their missions to support and properly arm and enable warfighters,” said Pat Motola, president of Troux Technologies. “A DoDAF-compliant Metis-based EA gives technology and business groups within the military a powerful collaborative tool for rapidly advancing their business-centric IT initiatives and minimizing costs to meet mission needs.”

“Delivering services and capabilities to the warfighter quickly and efficiently have always been driving goals,” said John M. Gilligan, VP, Deputy Director, Defense Sector, SRA International, Inc. (NYSE: SRX). “Today there is an accelerating urgency -- fueled by DoD’s network-centric transformation objectives -- to develop and field new capabilities faster, fully interoperable, highly secure and reliable, and to do this more cost effectively. Actionable Enterprise Architectures are fundamental to achieving these imperatives, and our architects need significantly improved tools to meet these growing challenges. We are very encouraged that Troux is responding aggressively to provide enhanced capabilities for creating and integrating architectures.”

The Metis Desktop 5.1 for DoDAF Template 1.1, provides extensive automation of data collection and reporting with optimized output for appropriate stakeholders. Other key features include:
• System Evolution Description (SV8) support. The Metis Desktop 5.1 for DoDAF Template 1.1 is the only EA tool on the market that can provide a ‘living timeline’ summary depicting interrelationships of multiple systems and component parts, and highlighting major milestones as a system evolves over time. The SV8 timeline enables DoD architects and systems integration partners visually to display the progress of a system or architecture, rather than simply check off a box to indicate completion of discrete events.
• Operational capabilities as objects. The Metis DoDAF-compliant metamodel provides an object type for operational capabilities. As a result, DoDAF services and capabilities needed by the warfighter aid in identifying potential gaps as well as unnecessary redundancies.
• Architecture reuse through broad support for DoD reference models and guidance documents. The new offering supports many of the DoD reference models, including the Technical Reference Model (TRM) and the DoD IT Standards Registry (DISR), as well as other FEA-style reference models. Supported DoD guidance documents include UJTLs (universal joint task lists), METLs (mission-essential task list) and associated tasks mapped to operational architecture constructs.

Other DoD-oriented products and services from Troux
In addition to its new Metis Desktop 5.1 for DoDAF Template 1.1, Troux is showcasing a variety of other DoD-oriented products and services at CISA. These include:
• Metis Data Import Facility (DIF)
• DoDAF Planning Methodology from Troux Solutions Group
• Data collection services from Troux Solutions Group

About Troux Technologies
Troux Technologies (pronounced “true”) is a global provider of IT Governance software that accelerates IT and business transformation. Troux’s IT Governance solutions enable organizations to strategically plan the enterprise, capture and analyze critical IT and business data and deliver actionable decisions to transform the business. Troux’s breakthrough technology provides the enterprise-class information, policies, and analytics critical for IT excellence. With Troux, organizations succeed in breaking the traditional IT silos and effectively aligning IT with core business goals.

Based in Austin, Texas, Troux Technologies serves the Global 1000 and government marketplaces. For more information, please visit www.troux.com or call (866) 273-9371.

Copyright 2005 Troux Technologies, Inc. All rights reserved. Troux and Metis by Troux are trademarks of Troux Technologies, Inc. All other company and product names mentioned are used only for identification and may be trademarks of their respective companies.

Visit Troux at the CISA World Wide Conference - Winter 2005
Omaha, Nebraska
November 28 to December 1

Media Contacts:
For Commercial Inquiries:
Meredith DeSpain
GCI Group
(512) 542-2819
e-mail protected from spam bots

Government:
Julie Keyser-Squires, APR
Softscribe Inc.
(404) 256-5512
e-mail protected from spam bots
www.softscribeinc.com

International:
Emilio Marisei
Troux Technologies
47 67 83 10 00
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:15 AM | Comments (0)

GTES Announces Relocation of SHERLOC™ Location Servers to PEER 1 World-Class Data Center

GTES announces today that it has relocated the servers for its SHERLOC™ Location Services (www.sherlocgps.com) to a world-class data center operated by PEER 1 Network Enterprises, Inc. (TSX-V:PIX).

Custer, WA – (PRWEB) Nov 29, 2005 -- GTES announces today that it has relocated the servers for its SHERLOC™ Location Services (www.sherlocgps.com) to a world-class data center operated by PEER 1 Network Enterprises, Inc. (TSX-V:PIX).

“Our customers are pleased with the hosted access to location services offered by SHERLOC™, as it requires no software installation and minimizes support requirements” stated GTES Senior Vice President and General Manager Gunnar Jonsson. “We recognized that as our customers come to rely on SHERLOC™ to enhance the security and visibility of their high-value goods in transit or mobile assets, we needed to ensure that we provided the most secure and reliable hosting and internet connectivity possible”.

After an extensive evaluation of the available co-location facilities, GTES chose PEER 1 as its Internet infrastructure provider. “The combination of security, reliability, and performance made PEER 1 the best choice for GTES and our customers” said GTES Vice President of Engineering Peter Carr. “With video surveillance, carded access, on-site security personnel, UPS and diesel power backups, redundant air-conditioning and fire suppression systems, and a high-availability Internet Transit network infrastructure, we are confident that PEER 1 will provide the support we need to ensure the availability and performance of SHERLOC™”.

SHERLOC™ is a web-based service that tracks the location of specialized wireless devices produced by a number of manufacturers, including those based on the latest Assisted GPS technologies. The system combines these technologies with an intelligent business-oriented application that is simple to manage and yet scales to meet the needs of customers from SMB to enterprise. Target applications include the tracking of high-value goods in transit through the supply chain, as well as vehicle based tracking solutions.

For more information on the SHERLOC™ wireless location services and products please contact VP of Sales Brooks Marsden at 770 754 1666.

About GTES
GTES has historically focused on providing support for Glenayre wireless messaging infrastructure and software. Recently, however the company has expanded its development activities to include wireless location technologies, a market that analysts forecast at $3.6 billion by 2010. In support of this new strategic direction, GTES has developed SHERLOC™ (www.sherlocgps.com), a complete one-stop wireless location service, which provides support for multiple tracking devices including the latest generation utilizing Assisted GPS technologies. Targeted at business customers who need to improve security or efficiency by tracking their high-value goods in transit or field assets, SHERLOC™ is a hosted application that combines configuration flexibility with ease of use.

About PEER 1
PEER 1 Network, a leading Internet infrastructure provider, delivers client-centric solutions that ensure customers’ online presence is available 100% of the time. From Internet network and co-location to dedicated hosting, PEER 1 has a solution to meet the online needs of companies of all sizes. Since its inception in 1999, the company has grown to include data centers and network points of presence in 16 major cities across North America and Europe, all connected by PEER 1’s world class Internet network. PEER 1 serves a variety of customers including hosting providers, online gaming companies, Internet phone (VoIP) companies and many small and medium sized businesses. The company’s headquarters are in Vancouver, Canada and the stock is traded on the TSX Venture exchange under the symbol PIX. For more information visit http://www.peer1.net.

Posted by Industrial-Manufacturing at 02:14 AM | Comments (0)

Kozio, Inc. Names New Director of Sales; Allan Arendt Joins Longmont-based Provider of Advanced Embedded Test Software for CPU Boards

Kozio, Inc., a leading provider of embedded software for system-level hardware testing, has named Allan Arendt as its director of sales. Arendt has nearly 20 years of experience in consultative sales for software and hardware companies.

Longmont, CO (PRWEB) November 29, 2005 -- Kozio, Inc., a leading provider of embedded software for system-level hardware testing, has named Allan Arendt as its director of sales. Arendt has nearly 20 years of experience in consultative sales for software and hardware companies.

"We're pleased to have found someone who has such strong sales experience, as well as such a solid understanding of technology," stated Kozio President Joseph Skazinski. "His work selling technical solutions to solve business problems, and specifically his work related to embedded software and development tools, is a great fit for us and our clients."

The director of sales position at Kozio is designed to help the company strengthen its market position in the embedded software arena, reinforce its current sales force and foster new relationships with processor board vendors and OEMs in the U.S., Asia and Europe. Arendt will report to Joseph Skazinski, Kozio's co-founder, president and CEO.

"I'm eager to help Kozio continue its established record of success," notes Arendt. "The company's software technology is already proven to streamline testing and production of computer-based motherboards, and I look forward to helping new companies benefit from Kozio's innovative approach."

Arendt's experience includes work as an independent manufacturers' representative, a sales trainer, consultant and sales manager. He's been recognized throughout his career for his skills and abilities in sales, and has successfully opened local and regional offices and broken new ground selling into new territories and markets. Arendt holds B.S. and M.S. degrees in engineering from Southern Illinois University in Carbondale, Illinois.

Kozio provides electronic product designers and manufacturers with software customized to perform on their processor board. This service includes the creation of software test algorithms providing comprehensive or near-comprehensive test coverage of various hardware components on a processor board. A detailed test-coverage document is delivered with the software.

Kozio software is offered in several variations, along with supporting services:
-Manufacturing Test Software – kMfgTest
-Board Bring-up Diagnostics – kDiagnostics
-Power-On Self Test Software – kPOST

In addition, Kozio also offers a free evaluation of its kDiagnostics software for board bring-up diagnostics for use on supported processor reference platforms from industry-leading semiconductor providers and product solutions companies.

About Kozio, Inc.
Kozio, Inc. develops software solutions that verify design and validate hardware for embedded single-board computer systems used in products such as ADSL gateways, wireless access points, network routers, voice solutions, security and test equipment, and aerospace systems. Kozio's products provide comprehensive test solutions, including diagnostics for board bring-up, automated manufacturing test, and built-in self-test software for manufactured products. Kozio's customers design, develop and manufacture boards used in computer-based electronic systems for the aerospace, networking, defense, test and wireless industries. Kozio has formed alliances with top-tier processor companies, including AMCC, Intel, IBM and Freescale. Kozio products ease many embedded systems development challenges, from design through manufacturing and support, saving customers time and money. The company is privately held and based in Longmont, Colorado. For more information, visit www.kozio.com.

Kozio and kDiagnostics is a registered trademark of Kozio, Inc. All other trademarks are property of their respective owners.

Contact:
Joseph Skazinski
Kozio, Inc.
(303) 776-1356

Brad Shannon
Shannon Marketing Communications
(970) 461-4906

Posted by Industrial-Manufacturing at 02:13 AM | Comments (0)

November 28, 2005

Integre Technologies Selected As Texas Instruments Authorized Design Center

Integre Technologies a leading provider of ASIC design and verification services today announced their selection as an Authorized Design Center for Texas Instruments HiRel, Defense & Aerospace (HiRel) Foundry Services. Integre’s team will assist Defense and Aerospace Foundry customers with analog and mixed-signal ASIC design and verification support along with support for the TI HiRel Foundry fabrication flow.

Rochester, NY (PRWEB) November 28, 2005 – Integre Technologies a leading provider of ASIC design and verification services today announced their selection as an Authorized Design Center for Texas Instruments HiRel, Defense & Aerospace (HiRel) Foundry Services. Integre’s team will assist Defense and Aerospace Foundry customers with analog and mixed-signal ASIC design and verification support along with support for the TI HiRel Foundry fabrication flow.

"Our customers expect a complete ASIC solution that requires a close partnership between the design engineers and the foundry," said Doug Zak, partner and head of the Analog Design group for Integre Technologies. "The strength of TI and their technologies enables us to offer our military and homeland security customers a top-shelf solution to satisfy their analog and mixed-signal ASIC requirements."

“Establishing a relationship with Texas Instruments allows both parties to offer a reliable and proven path to successful silicon development. Much of what we do at Integre is continuously look for opportunities to reduce risk in project development; having a close relationship with TI is a big step in that direction.” states Mark Blejwas Integre Managing Partner.

Rob Daniels, TI HiRel Foundry Engineering manager, states “Defense and Aerospace customers continue to move to custom analog and mixed signal integrated solution providers which are affordable, reliable, perform the desired functions, maintain government compliance, and are capable of supplying product for many years. TI in partnership with Integre Technologies brings a total solution addressing all of these customer care-abouts by offering proven analog and mixed-signal design services with stable and proven TI technologies and silicon.“

“Texas Instrument’s HiRel, Defense and Aerospace (TI HiRel) operation has been supporting Military and Space industries for over 30 years with high quality products and services. TI HiRel’s dedicated team, located in Sherman, Texas takes pride in being part of the Defense and Aerospace communities with a broad spectrum offering of semiconductor products. We are delighted to be closely working with Integre in expanding our TI HiRel support model to Defense and Aerospace customers with special needs in design services with foundry support. TI HiRel continues to bring state of the art technologies while maintaining mature technology support” said TI HiRel General Manager Monir Sadeghzadeh.

Trademarks

All trademarks and registered trademarks are property of their respective owners.

Posted by Industrial-Manufacturing at 01:57 AM | Comments (0)

Evergreen Air Center Captures Livery Painting Award for Airbus A310 Aircraft

Evergreen Air Center, Inc. is pleased to announce it was recently awarded a program to paint the liveries of 4 Airbus A310 aircraft for Air Transat. This program award launched the expansion of Evergreen Air Center by establishing a dedicated paint facility at Tucson International Airport.

Phoenix, Arizona (PRWEB) November 28, 2005 -– Evergreen Air Center, Inc. is pleased to announce it was recently awarded a program to paint the liveries of 4 Airbus A310 aircraft for Air Transat. This program award launched the expansion of Evergreen Air Center by establishing a dedicated paint facility at Tucson International Airport. The first aircraft was completed on time and has been released to service. Evergreen is scheduled to complete the fourth delivery in December of this year.

“This contract is another important step forward in expanding the partnership we have built with our Canadian customers,” said Robert McAndrew, President. “Our FAA Class IV Airframe Rating, 30 years of experience, and commitment to quality place Evergreen Air Center in a unique position to address our global customer base and their diverse fleet requirements.”

To learn more about Evergreen Air Center and the Evergreen companies please visit their website at: www.evergreenac.com

About Air Transat
Air Transat specializes in charter flights from several Canadian and European cities to vacation destinations, primarily in the south during the winter months and in Europe during the summer. Their fleet of 14 aircraft serves 90 destinations in 25 countries.

About Evergreen Air Center
Evergreen Air Center (EAC), based in Arizona, is the largest commercial aircraft storage, paint, and maintenance facility in the world with 20 million square feet of ramp and storage area that accommodates over 400 aircraft. For three decades, the privately owned company has been a FAA Approved FAR Part 145 repair station with a FAA Class IV Airframe Rating (#ERKR675D). In addition to FAA certification, EAC is ISO 9002 registered, holds maintenance certifications from the EASA, CAAC, and the Aruba DCA regulatory agencies, and offers various levels of maintenance and paint services on Airbus, Boeing, Embraer, Lockheed, McDonnell Douglas, and Raytheon aircraft. Recently featured in Aircraft Technology Magazine and proud recipients of the FAA’s Diamond Award, Evergreen Air Center continues to set the pace for the rest of the industry.

For more information regarding this release please contact:

Paul Worthington
Director Heavy Maintenance Sales & Marketing
Evergreen Air Center
V: 520.682.4181 ext 5041
F:520.616.5065
Website: www.evergreenac.com

Press Release submitted by: Corcoran Associates

Posted by Industrial-Manufacturing at 01:56 AM | Comments (0)

November 25, 2005

Aspen Avionics AT300 Hazard Display Awarded FAA Certification

Aspen Avionics’ innovative AT300 Hazard Awareness Display has been issued FAA TSO Authorization. The AT300 display shows pilots a moving map of nearby terrain and obstacle hazards, helping to improve safety in the cockpit. The product's compact design makes it well suited for installation into light piston engine aircraft that do not traditionally have room for adding new equipment.

Albuquerque, NM (PRWEB) November 25, 2005 -- Aspen Avionics announced today that the company recently received Federal Aviation Administration Technical Standard Order (TSO) Authorization for the innovative AT300 Hazard Awareness Display.

“Achieving FAA certification is a tremendous accomplishment for our team,” said Peter Lyons, Aspen’s president. “As a new manufacturer certifying a new class of product we were subject to intense FAA scrutiny during the certification process. We are immensely proud of the fact that we have successfully achieved both technical design approval and production manufacturing approval in such a short period of time. This accomplishment speaks volumes about the quality and pedigree of our team, our products, and our company.”

The AT300 has been certified as a TSO C8d Vertical Speed Indicator and as a TSO C113 Multipurpose Electronic Display. This dual certification allows the product to directly replace the legacy mechanical vertical speed indicator that is found in virtually all light aircraft.

The AT300 is the only color moving map display available in the market that can be directly installed in standard 3 inch instrument hole. This unique capability allows the AT300 to show valuable situational awareness information in the pilot’s primary instrument scan, and to do so without the expense or installation complexity associated with traditional Electronic Flight Information Systems (EFIS) or Electronic Horizontal Situation Indicators (EHSI). Because installation of the AT300 requires no panel modifications or equipment relocation, the unit can be installed in virtually any aircraft regardless of the available panel space.

The AT300 moving map display shows the pilot current and next navigation leg information overlaid on a high-resolution terrain and obstacle map. Terrain and obstacle data is color-coded based upon its vertical separation from the aircraft’s current altitude (similar to more expensive Terrain Awareness Warning System displays), providing the pilot with an intuitive and easy to understand display to help improve their awareness of potential hazards along the current flight route.

The AT300 also provides the pilot with a full time display of the aircraft’s height above ground – information which has not previously been readily available in most light aircraft. The AT300 can also be configured by the pilot to display either side profile terrain or a data block showing the active waypoint identifier, desired track, groundspeed, distance to go and estimated time enroute.

The large moving map display area offered by the AT300 is comparable in size to many mainstream multifunction display and global positioning systems (GPS). The instrument is unique in that it only requires the existing pneumatic interface used by the legacy vertical speed indicator, and a single wire connection to an approved panel-mounted GPS system. The AT300 is an affordable and easily installed color moving map upgrade for many older text based GPS navigation systems, and adds valuable secondary navigational display information to enhance the capabilities of more modern color map GPS equipment.

The AT300 has a list price of $3995 and is currently available from any Aspen Avionics Authorized Dealer. A complete list of dealers can be found on the company website at www.aspenavionics.com.

About Aspen Avionics LLC
Aspen Avionics is in the business of designing, developing and distributing technically innovative low cost avionics to meet the economic and operational needs of the piston-engine aircraft market. The company, headquartered in Albuquerque NM, was formed in 2004. The company can be found on the web at www.aspenavionics.com, or may be reached at (505) 856-5034.

Posted by Industrial-Manufacturing at 03:55 AM | Comments (0)

November 24, 2005

SEA Member Meeting Set for December 7, 2005

The Supplier Excellence Alliance (SEA) will hold its Member meeting in San Diego at the Hamilton Sundstrand facility on December 7, 2005.

IRVINE, CA (PRWEB) November 24, 2005 -- SEA Executive Director, Mickey Wiebe announced the next member meeting of the Supplier Excellence Alliance (SEA) will take place on Wednesday, December 7, 2005 in San Diego. The meeting will be hosted by United Technologies at their Hamilton Sundstrand facility, located at 4400 Ruffin Road, San Diego, CA 92186.

The meeting agenda will feature:
- A benchmarking of Hamilton Sundstrand’s new moving production line for the 787 aircraft
- United Technologies‘ presentation on key elements of their supply management strategies
- Four supplier presentations describing their results from implementation of the SEA Lean Enterprise System
- Update on the industry conversion process

Supplier company executives interested in attending the SEA Member meeting should contact Hilda Pacheco-Taylor at e-mail protected from spam bots

About the Supplier Excellence Alliance
SEA is the Joint Program Office for the conversion of the aerospace, defense and space industry supply chain. SEA is a non-profit alliance of leading industry prime contractors, tier-one suppliers, and key industry suppliers whose purpose is to accelerate supply chain performance.

SEA membership includes The Boeing Company, Lockheed Martin, Northrop Grumman Company, United Technologies (Pratt & Whitney, Hamilton Sundstrand, Sikorsky), Parker Aerospace, Rockwell Collins, Textron, (Bell Helicopter, Cessna Aircraft), Space Systems Loral, Hitco Carbon Composites, Bombardier, Honeywell, and TW Metals.

The industry Conversion Plan deploys a collaborative business system adopted by SEA member companies to help supplier organizations expand their capabilities and gain immediate and sustainable improvements.

To learn more about SEA visit the SEA website at www.seaonline.org.

Posted by Industrial-Manufacturing at 01:01 AM | Comments (0)

SVM Launches the 2005 E-Business Trends in Manufacturing Survey

SVM E-Business Solutions, a leading online marketing firm for manufacturers, launches the 2005 E-Business Trends in Manufacturing Survey -- a study of the key e-business and online marketing trends that are impacting manufacturing companies.

Parsippany, NJ (PRWEB) November 22, 2005 -- SVM E-Business Solutions, a leading online marketing firm for manufacturers, announced today it is launching the 2005 E-Business Trends in Manufacturing Survey.

This annual study helps industrial marketing executives acquire an in-depth understanding of the key e-business and online marketing trends that are impacting their industry and shaping their competitive environment. The goal of this survey is to educate and empower manufacturing executives with the knowledge to create and implement successful e-business and online marketing strategies.

"Most manufacturers understand that they must actively engage in online marketing to remain competitive," said Bob DeStefano, president of SVM E-Business Solutions. "The goal of our annual study is to help manufacturing marketing executives identify the key online marketing trends, tactics and best practices that they should employ to grow their business."

Through their participation in the 2005 E-Business Trends in Manufacturing Survey, industrial marketers will learn:
- The primary factors that contribute to a profitable e-business strategy
- The top online marketing techniques that generate the most sales leads
- The leading features and capabilities of successful manufacturing Websites
- Successful ways to employ email and search engines to achieve results
- The main online marketing initiatives to be employed by their competitors in 2006
- The most effective ways to measure e-business success

There is no cost to participate in this study and all industrial marketers are invited to contribute. All responses will remain strictly confidential and the survey will take only a few minutes to complete. Participants will receive priority access to the aggregated survey results, and an entry to win a $50 gift certificate from Amazon.com.

To participate in this survey, please go to www.svmsolutions.com/survey.

ABOUT SVM E-BUSINESS SOLUTIONS
SVM E-Business Solutions is a leading provider of strategic Web solutions focused on delivering measurable business results for manufacturers. Founded in 1995, SVM helps companies leverage the Web to drive revenues, control costs and strengthen relationships with customers. SVM's clients include Basic Fun, Becton Dickinson, Bombardier Aerospace, Covance, Cyro, Degussa, FosteReprints, Fujipoly, Konica Minolta, Marotta Controls, Ohaus, Ricoh, Sharp and Total Lubricants. For more information, visit SVM on the Web at http://www.svmsolutions.com, or call (877) SVM-EBIZ

Posted by Industrial-Manufacturing at 12:59 AM | Comments (0)

November 23, 2005

Hi-Tec Systems Well-Represented at Engineer Awards

Five Nominees Recognized at Banquet work for NJ Aviations Safety/Security Firm

MAYS LANDING, NJ (PRWEB) November 23, 2005 -- Hi-Tec Systems, Inc., was well-represented at the "Engineer of the Year" banquet hosted by the Southern New Jersey Professional Societies. Five of the 15 nominees work for Hi-Tec as specialists in safety or security at the Federal Aviation Administration's William J. Hughes Technical Center.

The combined organization consists of local chapters of the American Institute of Aeronautics and Astronautics (AIAA), the Institute of Electrical and Electronics Engineers (IEEE), the IEEE Computer Society, and the IEEE Women in Engineering Affinity Group. They recognized South Jersey's top engineers, scientists and technical leaders last week at a dinner and awards presentation at the Mays Landing Golf and Country Club.

A senior systems engineer from Hi-Tec Systems, Dr. Srinivas Mandalapu, received a plaque for "Outstanding Aviation Research." Mandalapu was honored for developing probability models that determine the relative risk of human and mechanical failures in aircraft. He supports the FAA's Risk Analysis Branch.

"This award gives a boost to my research, and inspires me to explore some new and exciting applications," said Dr. Mandalapu. "I am thankful to Hi-Tec for giving all the support I need for my work."

Other Hi-Tec employees were nominated in that same category for aviation research. Renee Frierson is a test engineer concentrating on airport lighting and pavement markings in support of the FAA Visual Guidance Section. The research by Nicholas M. Subbotin may help the FAA Airport Safety Technology Branch determine U.S. firefighting guidelines when new two-tiered aircraft such as the Airbus A380 begin flying to this country.

Harish Suri of Hi-Tec was a finalist for the title of "Engineer of the Year." Supporting the Technical Center, the environmental engineer developed one of FAA's first environmental management systems to identify and reduce risks, and to encourage conservation and recycling. Hi-Tec's Michael R. Wodell was a nominee in the "Technical Leadership" category. Wodell helps seek out emerging technologies for the Checkpoint Screening Program of the Transportation Security Administration Laboratory at the Technical Center.

ABOUT HI-TEC SYSTEMS: The company provides technical support to the U.S. Departments of Transportation, Homeland Security, Defense, the National Aeronautics and Space Administration, and the Social Security Administration. From its headquarters in Egg Harbor Township, NJ, and an office in the Washington, DC, area, the SBA-certified small business has made the 2005 Inc. 500 list. In March, Hi-Tec began a yearlong celebration of its tenth anniversary.

Posted by Industrial-Manufacturing at 01:41 AM | Comments (0)

November 22, 2005

Leading Tech Vendors Drive Sales with Online PR

Softscribe adds online PR product to fuel technology clients’ sales growth; debuts new Website.

Atlanta, GA (PRWEB) November 22, 2005 -- Softscribe Inc., a technology public relations firm focused on driving sales for companies targeting the US government, healthcare and hospitality markets, today announced a new online PR product to fuel clients’ sales growth and leverage their marketing investments. Softscribe also launched its new website today at http://www.softscribeinc.com to introduce the offering.

The new signature service, KeywordCapitalSM keyword phrase research, will be used by clients who want to draw more qualified prospects to their websites by making their technology public relations writing and websites more attractive to search engines. Keywords or phrases relate to a particular topic; sales prospects often type them into search engine browsers during the early stages of the technology buying cycle. Softscribe’s KeywordCapitalSM service develops a list of keyword phrases - based on competitiveness, popularity and relevance - for which the largest numbers of people are searching.

“Clients were asking, ‘How can more prospects find our company on the Internet?” said Michael B. Squires, president of Softscribe Inc. “During the past year, Softscribe has been aggressively learning how to apply the principles of Search Engine Marketing to online PR. One effective way is to use relevant keyword phrases in public relations writing and on websites. You may think you know the words that describe what you are selling, but are they the same words your sales prospects are using to find you on the Internet? The research that goes into our KeywordCapital product ensures they are the same.”

Jay Troutman, president of Aptech Computer Systems, said, “We told Softscribe that if they were not exploring Internet-based lead generation they ought to be, and were pleased to see they anticipated our needs.” Aptech engaged Softscribe to implement a long-term customer story PR program in 2001 that resulted in boosted qualified inbound sales leads and a 30% increase in website traffic. Aptech is the foremost provider of business intelligence, enterprise planning, financial, and operational software and services for the hospitality industry. In addition to the customer story program, Aptech also uses Softscribe’s new KeywordCapitalSM product and its optimized website writing program.

Squires explained KeywordCapitalSM may be integrated with the customer story program. He highlighted three other Softscribe clients that have successfully deployed Softscribe’s customer story campaign to:
• Grow from a legacy company to a digital-age success story and acquisition target;
• Accelerate growth from a product start-up mode to being acquired for $30 million;
• Drive 24% growth increase.

New website homepage features clients’ breaking news
Softscribe’s new website homepage will post breaking client news for greater reach across Web channels. “Fresh content causes a chain reaction on the Internet that pulls search engines to your site," said Squires, who recommends companies post fresh content weekly, if possible, through blogs, thought leadership columns or by repurposing press releases and Webinar content.

The following best-in-class companies created Softscribe’s new website:
Website design and construction:
• Cool Blue Interactive
• Graphic design and art direction: Hortensia Chu with McMac Publications
• Counsel on Search Marketing concepts: Prominent Placement, Inc.

For more information on KeywordCapitalSM or to register for a marketing analysis, please visit www.softscribeinc.com or contact Julie Keyser-Squires at e-mail protected from spam bots,
(404) 256-5512.

About Softscribe Inc.
Founded in 1999, Softscribe Inc. practices true public relations, not just publicity, to help technology companies targeting the US government, healthcare and hospitality industries drive product sales and solidify their brands. The company does this through a blend of traditional one-to-one-marketing public relations and imaginative Search Marketing with an emphasis on media and influencer relationships, writing and a focus on messaging strategy. Softscribe is honored to be chosen by Aptech Computer Systems, Inc., Gold Key Solutions, LodgeNet, NORTHWIND, Manugistics, Vantis International Corporation, SECURE-RES, Troux Technologies, ZDirect and many other leading technology companies. For more information please visit www.softscribeinc.com.

Media Contact:
Julie Keyser-Squires, APR
Softscribe Inc.
e-mail protected from spam bots
(404)256-5512
http://www.softscribeinc.com

Posted by Industrial-Manufacturing at 01:53 AM | Comments (0)

Micro/sys Releases EPIC Celeron/Pentium III Computer Board for GUI Applications

Based on an Ultra-Low Voltage Celeron core, the SBC4685 from Micro/sys provides a powerful, multimedia controller in a 4.5” x 6.5” EPIC-standard footprint. The color VGA interface supports resolutions of up to 1600 x 1200 and will connect directly to CRTs, TTL panels, single-channel LVDS panels, and dual-channel LVDS panels. Additionally, the AC97 audio interface allows output of sound from digital files or CDs or DVDs. This combination of video and audio interfaces allows the SBC4685 to easily implement systems ranging from kiosks to point-of-sale to industrial control panels.

Montrose, CA (PRWEB via PR Web Direct) November 22, 2005 -- Based on an Ultra-Low Voltage Celeron core, the from Micro/sys provides a powerful, multimedia controller in a 4.5” x 6.5” EPIC-standard footprint. The color VGA interface supports resolutions of up to 1600 x 1200 and will connect directly to CRTs, TTL panels, single-channel LVDS panels, and dual-channel LVDS panels. Additionally, the AC97 audio interface allows output of sound from digital files or CDs or DVDs. This combination of video and audio interfaces allows the SBC4685 to easily implement systems ranging from kiosks to point-of-sale to industrial control panels.

In addition to the multimedia features, the new model also includes many different data communications channels. Two 100BASE-T Ethernet ports, four serial channels (three RS232 and one RS232/RS485), two USB host ports, and the first CAN bus interface on an EPIC-sized board, allow the SBC4685 to rapidly and reliably transfer data, whether it is audio files or machine control packets. The SBC4685 also has a full complement of AT-compatible I/O, including a dual floppy interface, a dual IDE controller for four IDE devices, a keyboard/mouse controller, and a parallel printer port.

With 256MB of SDRAM, CompactFlash, and full AT-compatibility, high-performance control systems can be developed as single board solutions. In its stackthrough version, the SBC4685 is ideal for plugging into a custom OEM I/O card. The SBC4685 can boot DOS, Windows 98, Linux, Windows CE, Windows XP, VxWorks®, and other PC-compatible operating systems.

The SBC4685 is implemented with the Intel Ultra-Low Voltage Celeron or Low-Power Pentium III, which offers speeds up to 700MHz, on-chip cache, 64-bit DRAM access, and hardware floating point. If needed, I/O expansion can be added to the SBC4685 through PC/104 cards or high-speed I/O expansion can be added with PC/104-plus cards. The CompactFlash socket on the SBC4685 can be used as solid-state storage for operating systems and large applications. A free development kit is provided that includes cables, sample software, and full documentation.

The basic SBC4685 starts at $895 in single quantity. Optional features are quite cost-effective, as they do not require additional boards. Significant OEM discounts are available. Contact Technical Sales Dept., Micro/sys, Inc., 3730 Park Place, Montrose, CA, 91020, phone (818) 244-4600, FAX (818) 244-4246, email: e-mail protected from spam bots, URL: www.embeddedsys.com.

Micro/sys has been manufacturing OEM industrial microcomputer products since 1976, including board-level products and integrated computers. Micro/sys embedded computers are specified by OEMs in semiconductor processing, medical, mail handling, pharmaceutical, industrial marking, process control, and many other industries.

Posted by Industrial-Manufacturing at 01:52 AM | Comments (0)

SVM Launches the 2005 E-Business Trends in Manufacturing Survey

To participate in this survey, please go to www.svmsolutions.com/survey.

Posted by Industrial-Manufacturing at 01:51 AM | Comments (0)

FIPS 140-2 Certification Awarded to MOBILE ARMOR for its Advanced Cryptographic Module Used Across the Linux, Windows and Windows Mobile Platforms

Mobile Armor provides comprehensive mobile data security solutions for government and industry that protect data and facilitate regulatory compliance.

ST. LOUIS, Missouri (PRWEB) November 22, 2005 -- Mobile Armor, LLC (www.MobileArmor.com), the leading provider of Enterprise Mobile Data Security (EMDS) solutions software for protecting critical electronic assets through centralized management, integrated authentication, and high-speed cryptography, announced today it has been awarded FIPS 140-2 validation for the MOBILE ARMOR Cryptographic Module. This validation includes Microsoft Windows, Linux and Windows Mobile platforms and provides an independent assessment that MOBILE ARMOR’s cryptographic implementation meets the Level 1 encryption standards for data security and integrity under the joint US National Institute for Standards and Technology (NIST) and Canadian Communications Security Establishment (CSE) Cryptographic Module Validation Program.

“Mobile Armor is pleased with the independent validation provided by the Cryptographic Module Validation Program,” said Chand Vyas, Chairman and Chief Executive Officer of Mobile Armor. “Our Government customers require strong encryption that has been independently tested for quality and effectiveness; we are pleased to provide Enterprise scalable solutions that make use of this validated security.”

FIPS 140-2 specifies the rigorous testing requirements that must be satisfied by a cryptographic module utilized within a security system protecting information within computer and telecommunication systems. The testing covers areas related to the secure design and implementation of a cryptographic module and include design and documentation, module interfaces, authorized roles and services, physical security, software security, operating system security, key management, electromagnetic interference/electromagnetic compatibility (EMI/EMC), cryptographic algorithms, and self-testing.

Government and private sector organizations constantly face pressure to protect vital information and the United States Government requires FIPS 140-2 Certification for cryptographic technologies deployed in most federal agencies to assure adherence to industry standards. For more information regarding the Cryptographic Module Validation Program, visit http://csrc.nist.gov/cryptval/.

The ability to centrally create, deploy and manage security software, and ensure the stability and integrity of mobile data is crucial to safeguarding the increasingly mobile enterprise. MOBILE ARMOR provides the most reliable security management interface for all deployed Linux, Windows, Pocket PC, Palm OS and Blackberry devices and only MOBILE ARMOR provides the industry’s highest level of knowledge, experience and commitment to securing the enterprise.

With a data security system centered on its flagship Policy Server software, MOBILE ARMOR seamlessly integrates its Microsoft Certified DataArmor full-disk strong encryption and pre-boot authentication security software with other security applications such as file/folder encryption, antivirus, firewall, and virtual private networking. Using an extensible, cross-platform FIPS 140-2 certified cryptographic module and enterprise scalable web services based architecture, MOBILE ARMOR security solutions enable rapid deployment of centralized security policies that are consistently and uniformly applied across the enterprise to all electronic devices such as servers, PDAs, desktops, laptops, tablet PCs, and smart phones.

“FIPS 140-2 certification confirms MOBILE ARMOR’s enterprise mobile data security software meets and exceeds the most stringent standards for data security in the world,” said John Muir, Managing Director, Trusted Strategies, LLC, a research and analyst firm based in Pleasanton, California. “This award provides independent validation that Mobile Armor offerings provide their customers the highest level of security, performance and scalability.”

About Mobile Armor
MOBILE ARMOR, LLC is a Saint Louis based leading provider of Enterprise Mobile Data Security (EMDS). MOBILE ARMOR develops and markets the next-generation software suite that enables dynamic organizations to fully protect business, financial, and operating information and data. MOBILE ARMOR solutions are backed by the most knowledgeable experts in the industry. MOBILE ARMOR is a Microsoft Certified Gold Partner and has achieved Designed for Windows Mobile certification as well as Designed for Windows XP certification for its products. For more information, please visit www.mobilearmor.com.

Posted by Industrial-Manufacturing at 01:50 AM | Comments (0)

Marotta Selected By Aviation Week as Product Breakthrough Award Finalist

Marotta Controls today announced that Aviation Week & Space Technology has selected Marotta as one of 2005’s Product Breakthrough Award Finalists. Marotta’s model MV604C 3-way/2-position solenoid valve used in the Airbus A380 landing gear was chosen for this award due to its compact size, minimal part count and superior performance.

Montville, NJ (PRWEB) November 22, 2005 -- The MV604C is used in the hydraulic manifolds of the A380’s new main body landing gear, which was developed to enhance the maneuverability of the super-jumbo aircraft on the ground, and allows both front and back wheels to turn in unison. The compact and lightweight MV604 actuates a spool in the manifold, controlling the aft steering of the aircraft when commanded.

“Our engineering team has a long history of designing demanding fluid control solutions,” said Michael Leahan, Vice President and Chief Sales Officer of Marotta. “We are pleased to be recognized by Aviation Week for our contribution to this exciting new aircraft.”

The Airbus A380, the word’s largest passenger plane, will be the most advanced, spacious and efficient commercial airliner in the sky. The 555-seat, double-deck aircraft will provide a supreme level of comfort for its passengers, and is expected to take its first commercial flight next year.

About Marotta Controls:
Marotta Controls, Inc., a worldwide leader in control solutions, has over 200 patents and more than 60 years’ experience in providing customers with a wide range of fluid control systems for the most demanding applications in the marine, space, aerospace and pneumatic weapons markets. Marotta has subsidiaries in Cheltenham, UK, and Dublin, Ireland. For more information visit Marotta's website, www.marotta.com.

Contact:
Tara Castorina
Marotta Controls, Inc.
e-mail protected from spam bots
973-334-7800 x506

Posted by Industrial-Manufacturing at 01:49 AM | Comments (0)

November 21, 2005

AFIT Accelerated Flight and Instrument Training... Our clients Increasingly Realize The Importance To Train With The Industries Finest Flight Instructors

Inexperienced Accelerated Flight Training providers may offer useless or even damaging services to unsuspecting clients/pilots abound in the Accelerated Flight Training Industry. “There are so many myths, half-truths and potentially dangerous methods in circulation that Accelerated Training has become extremely confusing. We spell out and provide the reality of Accelerated Flight Training, drawing from years of extensive experience, Training, service and successful Business we have provided over the years.

(PRWEB) November 17, 2005 -- We are very excited to have 46 of the finest Senior Flight Instructors on staff across the country with the experience and expertise AFIT’s team has to offer,” stated Tony P. Montalte General Manager of Accelerated Flight & Instrument Training. The Accelerated Flight Training Industry continues to develop at a rapid pace. AFIT has the Reputation, Knowledge, Expertise and References that brings clients to us from all walks of life, from Big Screen Actors, Doctors, lawyers, National Football League Players, and Businessmen alike, from around the country. Added Mr. Montalte.

New clients keep calling in and referrals are at an all time high, we just released our new Customer Satisfaction Survey and existing and returning clients routinely express their high satisfaction, stated an obviously happy Montalte. The company's slogan and guarantee – “We Come To You” and “We Guarantee our 10 day IFR course" – are apparently not just catchy taglines as evidenced by it’s new Client testimonials and references that each potential customer receives upon enquiring for AFIT’s Accelerated Flight Training Programs and services across the country.

AFIT along with their 46 Senior Instructors share a common passion, ensuring clients receive the finest Accelerated Flight Training this industry has to offer and a willingness to take innovative steps to serve our customers," said Montalte. "As a larger than life symbol of our Commitment AFIT will further our efforts in providing unique customer experiences and a new means of enriching the Accelerated Flight Training Community with special Flight Training programs and our Renowned 10 Days (or less) “Guaranteed” Accelerated IFR Program.

Posted by Industrial-Manufacturing at 02:34 AM | Comments (0)

SEA Expands its Supplier Executive Briefing Schedule to Two New Key States

Supplier Excellence Alliance (SEA) expands its series of Executive Briefings for aerospace, defense, and space suppliers. Supplier firms learn about the industry conversion plan for the supply chain.

IRVINE, California (PRWEB) November 20, 2005 -- The Supplier Excellence Alliance (SEA) conducted initial Executive Briefings in Texas and New York for aerospace, defense and space supplier companies, marking the launch of SEA’s rollout in these states. The Texas briefing took place at the NASA facility in Houston on November 7. It was hosted by The Boeing Company, Lockheed Martin, and Rockwell Collins. The New York briefing, hosted by Lockheed Martin, took place at their Owego facility on November 18.

A series of Executive Briefings will be scheduled in both states, as well as in California, Connecticut and Florida.

SEA is the Joint Program Office for the conversion of the aerospace, defense and space industry. As a non-profit alliance of leading industry prime contractors, tier-one suppliers and key industry suppliers, SEA’s purpose is to accelerate supply chain performance.

SEA Executive Briefings give aerospace, defense and space suppliers an opportunity to learn about SEA and how they can partner in the effort to ensure the global competitiveness of the U.S. supply chain.

According to Barry Neighbors, SEA’s Director of Outreach, “During an Executive Briefing suppliers have the opportunity to evaluate their current performance against emerging customer requirements - and they develop an understanding of the capabilities they’ll need to compete successfully in the new supply chain.”

In addition to regional Executive Briefings hosted by SEA member companies, suppliers throughout the country can log onto National Executive Briefings presented periodically as web casts. The next National Web Cast is set for December 13. For web cast details go to www.seaonline.org and click on the “Briefing” tab.

SEA began its national rollout with supplier firms in California and followed with launches in Connecticut, New York, Texas, and Florida. Now supplier in these states can learn about the SEA Conversion Plan and consider adopting this industry standard business system. The Conversion Plan supports suppliers in improving on-time delivery and quality performance, while reducing costs. Supplier companies already implementing the Conversion Plan are reporting dramatic improvements.

About the Supplier Excellence Alliance (SEA)

SEA is the Joint Program Office for the conversion of the aerospace, defense and space industry supply chain. SEA membership includes The Boeing Company, Lockheed Martin, Northrop Grumman Company, United Technologies (Pratt & Whitney, Hamilton Sundstrand, Sikorsky), Parker Aerospace, Rockwell Collins, Textron, (Bell Helicopter, Cessna Aircraft), Space Systems Loral, Hitco Carbon Composites, Bombardier, Honeywell, and TW Metals.

To learn more about SEA – and to register for an Executive Briefing - visit the SEA website at www.seaonline.org.

Posted by Industrial-Manufacturing at 02:32 AM | Comments (0)

Aircraft Anti-Hijacking-Collision Systems Previews Addition for Pilot and Passenger Safety

Newly Patented Anti-Terrorist Aircraft Pilot Sensor System And Method Prevents Aircraft From Being Hijacked (US Pat. # 6,810,310 1B) To Add Element To Greater Enhance Pilot and Passenger Safety

(PRWEB) November 19, 2005 -- GLOBAL AIRCRAFT SAFETY SYSTEMS of Reno, Nevada, which announced the latest innovation in aircraft safety last quarter, will be unveiling a new element to the patent which will use biometric sensors on the pilot and co-pilot to add heightened safety to both crew and passengers.

August 25, 2001: Singer and R&B vocalist Aaliyah was killed in a plane crash when leaving the Bahamas following a video shoot. Her Cessna 402-B crashed during takeoff. Investigation has showed that the pilot had had traces of cocaine and alcohol in his body. All nine people aboard died.

October 25, 1999: Professional Golfer Payne Stewart died when his Learjet Model 35 crashed near Aberdeen, South Dakota. The airplane departed Orlando, Florida, for Dallas, Texas. Radio contact with the flight was lost north of Gainesville, Florida. The airplane was intercepted by several Air Force and Air National Guard aircraft as it proceeded northwest-bound. The military pilots in a position to observe the accident airplane at close range stated that the forward windshields of the Learjet seemed to be frosted or covered with condensation. The military pilots could not see into the cabin. The military pilots observed the airplane depart controlled flight and spiral to the ground, impacting an open field. All six were killed. The cause was the explosive decompression of the aircraft's cabin, resulting in the loss of consciousness for the occupants.

April 26, 2002: Glider tow pilot died in a crash at the Air Force Academy suffered a heart attack before the plane went down. Paul Vogel was pulling a glider with two cadets when his Piper Cub suddenly dove, pulling the glider down with it. The tow rope snapped and Vogel's plane barreled into the ground. The glider landed safely. Tests showed Vogel probably had a heart attack.

These are just a few examples of situations that could have been averted when using the system developed by Global Aircraft Safety Systems. The current patent released by Global Aircraft Safety Systems operates by installing biometric sensors in the cockpit of all aircraft, preventing any unauthorized persons from gaining control of in-flight aircraft. Only the pilot and co-pilot are recognized by the onboard computer to operate the aircraft. If for any reason, the pilot and co-pilot become disconnected from the system, the aircraft will then enter into “Global Aircraft Safety Systems Automatic Override Safety Systems Procedure” which begins by alerting all emergency agencies of the impending dangerous situation. If the aircraft and/or pilots are compromised, “The Command Control Center” will disenable flight control functions from the compromised aircraft. “The Command Control Center” can then land the aircraft safely at the nearest designated airstrip prepared for emergencies situations.

The new technology will add the ability to detect serious changes in the biometrics of the pilot and take over control of the aircraft, while alerting emergency agencies of the status of the pilot. The beacon system works by having a transceiver in all aircraft. The transceiver receives the signal from the transmitter located on the protected object. If any aircraft get within the airspace surrounding the protected object, the aircraft will go into “autopilot-override mode” which then deactivates the onboard controls. The aircraft can then be diverted away from protected objects. “The Command Control Center” can then land the aircraft to safety safely.

Global Aircraft Safety Systems is working with IntelliGlobal Mergers and Acquisitions to actively develop a consortium of buyers across a spectrum of businesses which would benefit from developing the patent. These include the US government, airplane manufacturers, airports, insurance companies, and aerospace technology developers just to start. “The applications for this device range from military to commercial to personal aircraft. We are seriously considering inquiries from the U.S. government as well U.S.-based private companies,” stated Deborah de Montfort for IntelliGlobal. “In the commercial industry, there are numerous uses in airport security management in addition to those by the private liners themselves. These also include private jets used for moving of supplies, mail, and other materials but do not carry large numbers of passengers.” The goal of building the consortium is to create a partnership among government and corporations that can harness the technology and applications in order to provide the highest level of safety possible.
In conclusion, Ted McBain, president of Global Aircraft Safety Systems, stated, “The sooner we all get together on implementing these systems, the sooner we can feel safer at home, work, and of course, while flying. Once the systems are in use, we will be another step closer at keeping our people and our country out of harms way.”

FOR MORE INFORMATION CONTACT:
Deborah de Montfort
IntelliGlobal Mergers & Acquisitions
704.846.0483
Fax: 704.846.0439
www.intelliglobal.com
For Patent Information: www.victorypatents.com

Posted by Industrial-Manufacturing at 02:31 AM | Comments (0)

Hi-Tec Systems Names Philip N. Gray as Vice President of Business Development

Hi-Tec Systems President and CEO Trib Singh calls Gray an asset to the company.

(PRWEB) November 19, 2005 -- Philip N. Gray has joined Hi-Tec Systems, Inc., as the Vice President of Business Development. Hi-Tec also has an office in Arlington, VA, to serve customers at federal agencies in and near Washington, DC.

Hi-Tec Systems President and CEO Trib Singh calls Gray an asset to the company. Singh says, "Phil brings hands-on experience managing and supervising large, highly technical FAA programs to modernize the National Airspace System."

Gray, a native of the Washington, DC, area, comes to Hi-Tec after 22 years with Raytheon Technical Services Company. As regional manager for Raytheon, Gray has spent the last 14 years working on Federal Aviation Administration contracts at the William J. Hughes Technical Center near Atlantic City.

Singh says Gray's primary responsibilities are to develop business opportunities and win new government contracts for Hi-Tec. He will focus on the company's core competencies of aviation safety; communication, navigation, surveillance and air traffic management (CNS/ATM) systems, homeland security and defense; information technology, and environmental engineering.

Gray has three adult children, and serves as a volunteer helping raise money behind-the-scenes for various charities in Atlantic County, NJ. He holds a bachelor's degree in mathematics and a master's degree in computer science from the University of Maryland. Gray is an avid golfer.

ABOUT HI-TEC SYSTEMS: The company provides technical support to agencies in the U.S. Departments of Transportation, Homeland Security, Defense, the National Aeronautics and Space Administration, and the Social Security Administration. Employees around the world provide engineering, management, research and information technology services to customers which include the Federal Aviation Administration (FAA) and Transportation Security Administration (TSA), as well as aviation authorities, airports and airlines in Asia. Based near Atlantic City, NJ, the SBA-certified small business is on the 2005 Inc. 500 list of the nation's fastest-growing private companies. In March, Hi-Tec began a yearlong celebration of its tenth anniversary.

Posted by Industrial-Manufacturing at 02:30 AM | Comments (0)

Southwest Airlines Offers Travel Tips for Holiday Trips

Southwest Airlines has travel tips for this busy Holiday Season that will keep spirits flying high. The Holidays can be hectic, and Southwest tips can help Customers make their holiday trip stress-free.

Dallas, TX (PRWEB) November 18, 2005 -- Southwest Airlines has travel tips for this busy Holiday Season that will keep spirits flying high. The Holidays can be hectic, and Southwest tips can help Customers make their holiday trip stress-free.

Tip 1: Get your Yoga cards out…it’s time to be flexible! Southwest Airlines, known for its low fares, makes traveling this holiday season as easy as clicking your mouse. To get the best travel deals, visit www.southwest.com. Keeping your travel dates flexible will help Customers find fares that fits their holiday budget, and flexibility is made easy on www.southwest.com through Southwest Shortcut—a tool that assists Customers by offering alternate travel dates that may have a lower fare available.

“Flights are filling up earlier this year, but there are still great deals available,” said Keith Taylor, Southwest Airlines Vice President of Revenue Management and Pricing. “Save your dough for holiday gift giving. With just a few clicks of the mouse, Southwest Customers can get home for the Holidays.”

Tip 2: But I can’t remember Aunt Bertha’s size! Never fear, the southwestgiftcard is here. No one will want to return the new southwestgiftcard. In amounts ranging from $10 to $1,000, the southwestgiftcard comes in sizes to fit everyone’s wallet. Since it never expires or loses value, it’s perfect for both the jet setters and procrastinators on your list. “The gift of travel never goes out of style,” said Joyce Rogge, Southwest Airlines Senior Vice President of Marketing. “Southwest is all about giving Customers what they want, and the southwestgiftcard is sure to be high on everyone’s gift list.”

Tip 3: Over the river and through the woods, wait—I have to get through the airport first! Southwest Airlines offers the keys to easy travel. Below are some of Southwest Airlines’ secrets to lightening the load; securing the coveted “A” boarding pass; and zipping through the airport; visit www.southwest.com to view the complete list and check it twice:

• Your mother was right; the early bird does get the worm! Like your favorite shopping center, the lines at designated airport parking areas, ticket counters, and security checkpoints get longer, especially on peak travel days. Though all airport personnel will be diligently working to help you have a pleasant airport experience, Southwest expects Tuesday, November 22; Wednesday, November 23; Sunday, November 27; and Monday, November 28 to be busier than usual.

• Boarding passes, flights times, and long lines; Oh My!: Getting to the airport is one thing; moving through it is another. That’s why Southwest recommends that you [check in online to help you get from the main entrance to the designated departure gate more quickly. (Even if you plan to check luggage, you can still retrieve your Boarding Pass via southwest.com.) Southwest encourages our Ticketless Travel Customers to visit the Travel Center to cancel, change, and/or rebook their flight reservations. All ticketed Customers may contact Reservations (1-800-435-9792) for additional assistance. Please visit Flight Status Online for the latest information regarding your flight. You may also sign up for our convenient Flight Status Messaging to receive the latest information about your flight via e-mail, cell phone, or pager.

• Baggage is naughty and nice, make sure you check yourself before checking your bags! All luggage is subject to inspection, and regardless of the way it is packed or sealed, it may have to be opened. In addition to our normal baggage policies and procedures, Southwest recommends arriving at the ticket counter 60 to 90 minutes before your flight’s scheduled departure. Click here to review our suggested Airport Arrival Times. To ensure that your name and contact information are displayed on your checked luggage, Southwest also recommends that you place a name tag (that includes a convenient phone number) on your carryon items and inside your checked baggage. That way, Southwest can attempt to return them should any get left behind. If you plan to bring a gift, please know that all wrapped packages must be opened for inspection by airport security. Though some airports that Southwest serves offer gift wrapping (courtesy of their concierge services), Southwest suggests shipping your gifts and packages ahead of time. Southwest also asks that you carry your keys and medicines on you (or in your carryon items) instead of in your checked luggage.

• When In Doubt, Leave It Out. If you’re not sure whether an item will be accepted past the security checkpoint, it’s probably best to either travel without it or pack it in your checked luggage. For a list of items that can and cannot be carried onboard the aircraft, Southwest encourages you to visit: www.tsa.gov to help reduce the amount of time spent at the security checkpoint.

• Help your little turkeys not be little jerkys: To ensure a pleasant travel experience for parents traveling with small children, as well as for Unaccompanied Minors, Southwest asks you to take a few minutes and visit southwest.com’s Taking the Kids™ travel link.

For the Holiday Season or for anytime—take advantage of Southwest Airlines’ super low fares, book their via the Internet and subscribe to Southwest Airlines’ Click ‘n Save e-mail updates as well as Southwest Airlines’ newest technological innovation – DING!

DING! delivers Southwest Airlines’ hottest deals directly to Customers’ desktops allowing Customers to get a jump on the latest southwest.com sales! For more information, visit http://www.southwest.com/ding.

www.southwest.com

Media Please Contact:
Southwest Airlines Public Relations
+1-214-792-4847
Customers:
+1-800-I-FLY-SWA or +1-800-435-9792
en Espanol:
+1-800-VAMONOS or +1-800-826-6667

Posted by Industrial-Manufacturing at 02:29 AM | Comments (0)

November 18, 2005

SmartClixx Clears the Runway for the southwestgiftcard

Boca Raton, FL (PRWEB) November 17, 2005 -- Southwest Airlines Co. (NYSE: LUV) announced on November 1st the launch of the southwestgiftcard at http://www.southwest.com . SmartClixx, the leading provider of in-house stored value card and gift card software, supplied the solution.

Southwest now offers the southwestgiftcard for purchase at southwest.com, and is redeemable at southwest.com, Southwest Ticket Counter locations, and by calling Southwest Airlines Reservations at (800) IFLYSWA.

"SmartClixx delivered a customized system on time and on budget," said Tom Nealon, CIO at Southwest. "When we were evaluating gift card software and third party solution providers, SmartClixx had the best Customer references and a proven track record for delivering and deploying successful solutions. As their first airline customer, Southwest brought some special challenges to the SmartClixx technical team that no other airline has yet accomplished. We are extremely pleased with the results and know that we have a premier solution."

"So far, the program has been a tremendous success," stated Joyce Rogge, Senior VP of Marketing for Southwest. "Gift card sales have well exceeded our expectations. We are most pleased with the success of our electronic version of the southwestgiftcard, which can be emailed to the recipient free of charge and received within an hour. Our Customers are proving that they like the instant gratification of the electronic southwestgiftcard."

The Southwest Marketing department reports that their creative Customers are the best source for new ideas. Customers are sending southwestgiftcards to friends and family for a variety of reasons -- holiday gifts, birthdays, wedding gifts, and many simply encouraging the recipient to take a much needed vacation. As the holidays approach, it seems that everyone wants to be with someone they love, and what better way to make it happen than with the southwestgiftcard from the LUV airline!

SmartClixx targets the world's largest companies that want to run their stored value card operations in-house. Gary Dinkin, SmartClixx CEO, says, "We are very pleased with the success that Southwest is experiencing. Southwest Airlines brought some new challenges to the table for us but because our software is extremely robust, easily configurable, and richly API-driven, we were able to successfully meet their expectations."

About Southwest Airlines Co.
Southwest Airlines, the nation's largest carrier in terms of domestic passengers enplaned, currently serves 61 cities in 31 states. Based in Dallas, Southwest currently operates more than 3,000 flights a day and has 31,000+ employees systemwide.

About SmartClixx LLC
SmartClixx LLC works with some of the world's largest retailers providing unique in-house Stored Value Card/Gift Card application software and services without charging per-transaction fees. Security, flexibility, streamlined processes and operations, data mining, and future capability with significant cost savings are just a few reasons why Southwest Airlines, Saks Incorporated, Charming Shoppes, Chico's, The TJX Companies and many others selected the SmartClixx Stored Value Card solution. For more information about SmartClixx, please visit http://www.SmartClixx.com or call (561) 998-8515.

SmartClixx, SmartClixx Stored Value Card, and SmartClixx SVC are all trademarks of SmartClixx LLC in the United States and/or other countries.

CONTACT:
Linda Brodsky of SmartClixx LLC,
+1-561-998-8515/
Web site: http://www.SmartClixx.com

http://www.southwest.com/

Posted by Industrial-Manufacturing at 12:38 AM | Comments (0)

November 17, 2005

Solid Converter PDF v3.0 Enhances PDF Conversion and Creation Capabilities

New features, including advanced table handling and the ability to create PDFs in any program, make Solid Converter PDF more compatible with Microsoft Office than ever.

Redmond, Washington (PRWEB) November 17, 2005 -- VoyagerSoft, LLC, makers of Solid Documents™ products, today announced the release of Solid Converter® PDF version 3. The new version features advanced PDF conversion and creation capabilities that enhance its compatibility with Microsoft® Office programs, making it easy to convert documents to and from the universally accessible Portable Document Format (PDF).

“Our goal is to make it as easy as possible for our customers to work with PDFs;” said Michael Cartwright, CEO of VoyagerSoft, LLC. “With Solid Converter PDF v3 users can easily import PDF content into Microsoft® Word and Excel®, make edits and changes, and save their files in the PDF format again after editing. There’s no need to learn or own other software to take advantage of the power of PDF.”

The new version of the product features:
• Enhanced conversion output. Now more than ever, Solid Converter PDF v3.0 provides extremely high-quality conversions that are easy to edit in Word or Excel. Technological improvements in the program have improved the quality of extracted graphics, character formatting, font handling and font matching. The integrity of the original file is maintained, eliminating the need for reformatting and rework.
• Advanced table handling. Users can now extract tables from PDF files directly into Excel spreadsheets to access and re-use data. Users can also open PDF files with tables into Microsoft Word, where each table is handled as a separate object that can be easily changed using Word’s table manipulation features.
• Create PDF from any program. In the new Professional version of Solid Converter PDF users can create PDFs from any Windows program. (As in previous versions, users of the Standard version can create PDFs directly from Microsoft Word.) Newly created PDF files can be compressed for faster downloading on the Web and protected by adding passwords to open or edit documents.

Thus, a common use scenario might be the following: A user extracts a PDF table to an Excel spreadsheet, makes updates to the data, and adds new formulas. Because of the compatibility of Microsoft products, the new converted table can then be imported and re-used in other Office programs such as Word or PowerPoint. The new document is then saved as a compressed PDF and displayed on the company’s Web site.

Solid Converter PDF has been a successful and trusted product for years, backed by first-class customer service. As one of our many appreciative customers recently told us, “Good buys are hard to find; this is one of them.”

Feature List:
• Extract tables to Excel
• Extract all images to common graphics files formats – JPG, GIF, PNG, BMP, or TIF
• Create PDFs from ANY Windows program (Professional version only)
• Supports new Word and Excel XML formats used in Office 12
• One-button PDF creation from Word
• One-button PDF creation from Excel and PowerPoint® (Professional version only)
• Converts the entire PDF file at once, or, you can choose specific pages to be recovered
• Matches PDF fonts with Microsoft® Windows® installed fonts
• Re-flows content from column to column, and page to page
• Replicates the PDF page layout including tables
• Retains fonts, character formatting and paragraphs
• Enhanced table conversion in Microsoft Word
• Plain Text option that removes layout and character-level formatting, if desired
• Converts vector graphics to embedded, editable vector objects in Word

Availability and Pricing:

Solid Converter PDF is available directly through Solid Documents®, the Solid Documents global network of reseller partners, and major software retailers. Solid Converter PDF v3 is available in $59.95 and $99.95 (Professional) versions for individual users, with volume discounts available through the Solid Documents Enterprise License Program. For additional information on features, pricing, and volume licensing programs, please visit www.solidpdf.com or call (1) 800-880-2654.

About VoyagerSoft, LLC:

VoyagerSoft, LLC, makers of Solid Documents products, is a leading provider of easy-to-use document utility tools, including Solid Converter PDF. The company creates an array of affordable document conversion, image capturing, and digital editing products that are backed by superior customer service and support. Company success can be attributed to one fundamental design principle: Keep it simple.

Posted by Industrial-Manufacturing at 01:25 AM | Comments (0)

Pilots Increasingly Realize The Importantance To Train With The Industries Finest Flight Instructors

New clients keep calling in and referrals are at an all time high, we just released our new Customer Satisfaction Survey and existing and returning clients routinely express their high satisfaction, stated an obviously happy Montalte. The company's slogan and GUARANTEE – “We Come To You” and “WE GUARANTEE OUR 10 DAY IFR COURSE” – are apparently not just catchy taglines as evidenced by it’s new Client testimonials and references that each potential customer receives upon enquiring for AFIT’s Accelerated Flight Training Programs and services across the country.

AFIT along with their 46 Senior Instructors share a common passion, ensuring clients receive the finest Accelerated Flight Training this industry has to offer and a willingness to take innovative steps to serve our customers," said Montalte. "As a larger than life symbol of our Commitment AFIT will further our efforts in providing unique customer experiences and a new means of enriching the Accelerated Flight Training Community with special Flight Training programs and our Renowned 10 Days (or less) “Guaranteed” Accelerated IFR Program.

Posted by Industrial-Manufacturing at 01:24 AM | Comments (0)

Co-Operative Industries Aerospace Receives CAAC Repair Station Approval

Co-Operative Industries Aerospace has recieved certification from the Civil Aviation Authority of China to overhaul and repair electrical wiring harness accesories for airline and overhaul centers operating under Chinese authority.

Fort Worth, TX (PRWEB) November 17, 2005 -- Co-Operative Industries’ Repair Station has received CAAC certification for civil aircraft equipment and aviation component maintenance. The Civil Aviation Authority of China’s approval, under Section CCAR-145R2, allows Co-Operative Industries Aerospace to overhaul and repair electrical wiring harness accessories for those airline and overhaul centers operating under Chinese authority.

This certification complements the FAA and EASA certificates presently held by Co-Operative Industries. Their certified Repair Station currently serves major airlines and OEMs in the US and European markets. With the addition of CAAC approval, Co-Operative Industries now has near worldwide compliance for overhaul & repair services of engine wiring harnesses, ignition leads, components and accessories. “The addition of CAAC certification allows us to expand our services and assist the growing Asian market with their maintenance needs,” said Sam Symonds, CEO.

About Co-Operative Industries
Co-Operative Industries is an ISO9001:2000 and AS9100 registered company based in Fort Worth, TX. They provide Part 145 services such as check & test, overhaul and repair, and S/B incorporation for many of the aircraft wiring harnesses in service today. In addition to their Repair Center, Co-Operative Industries designs and manufacturers electrical wiring interconnects, ignition leads, and flexible conduits for airframe, engine, and space applications.

For additional information on Co-Operative Industries Aerospace or the services offered, please contact:

Repair Station Services Group
Co-Operative Industries Aerospace
5133 Northeast Parkway
Fort Worth, TX 76106

Phone: 817-740-4700
Fax: 817-624-4282
Web: www.coopind.aero

FAA No.: OI0R891N
EASA: EASA.145.5897
CAAC No.: F00100406

Posted by Industrial-Manufacturing at 01:23 AM | Comments (0)

BPS: Homeland Security; Protecting our Borders through Biometrics, RFID, Surveillance and Sensor Technology

Homeland Security Focused on Addressing Illegal Immigration and Terrorism through Stronger Borders and Ports

(PRWEB) November 17, 2005 -- www.BorderAndPortSecurity.com (BPS), and www.HomelandDefenseStocks.com (HDS), investor news portals for border, port and Homeland Security, report on the nation’s focus on innovative technology to address illegal immigration and terrorist activity. Industry expert Brian Ruttenbur, Equity Research Analyst, Morgan Keegan & Co. Inc. provides insight and sector participants L3 Communications/SYColeman, SENSE Holdings and Law Enforcement Associates, discuss inside perspectives on the direction of this critical area within Homeland Security.

Article Excerpt: Homeland Security - Protecting our Borders and Ports through Biometric, RFID, Sensor and Surveillance Technology

Securing our ports and borders has become a major focus of Homeland Security, in particular since the events of 9/11. President Bush has made addressing problems with illegal immigration, terrorist activities, and illegal smuggling of weapons and drugs a high level priority of border and port security.

A key initiative towards the achievement of secure borders and ports to ensure the facilitation of lawful travel and trade, an accurate immigration system and the overall protection of visitors and citizens is the U.S. Visit program.

“The biometric side of the business is going to grow extremely fast all because of the enhanced border and visa security act that was passed in 2002 by Congress, which is forcing every country in the entire world to go with biometric sensors and biometric travel documents,” explains Homeland security technology expert Brian Ruttenbur, Equity Research Analyst, Morgan Keegan & Co.

To Read the Full Report Click Here: http://www.BorderandPortSecurity.com/BPS/News/Technology.asp

BPS and HDS do not make recommendations, but offer unique, free information portals for investors to research news, articles, interviews and a growing list of participating public companies within the Homeland Security sector.

www.BorderandPortSecurity.com, a portal within the InvestorIdeas.com and HomelandDefenseStocks.com content umbrella, offers investors research, news and links to public companies within the border and port security sector. For a list of companies within this sector: http://investorideas.com/BPS/Stock_List.asp

www.HomelandDefenseStocks.com also includes one of the most comprehensive free Homeland Security stock lists in the investment industry: www.HomelandDefenseStocks.com/Companies/HomelandDefense/Stock_List.asp

Member: US National Defense Industries Association (NDIA), Canadian Defence Industries Association (CDIA)

HomelandDefenseStocks.com Blog:
Read the latest news and views about the Homeland Defense Industry and Homeland Security Stocks: www.InvestorIdeas.com/blogs/index.html or www.HomelandDefenseStocksblog.com/blogs/index.html

Homeland Security / InvestorIdeas Advertising Opportunities:
www.InvestorIdeas.com/advertise/

InvestorIdeas.com RSS Feeds and Blogs: http://www.investorideas.com/RSS/Default.asp

Investor Incite Newsletter
InvestorIdeas.com’s free "Investor Incite" Newsletter consists of company and industry updates, investment research and developing trends in key areas such as Homeland Security, Renewable Energy, Oil and Gas and more.

To sign up, click here: www.InvestorIdeas.com/Resources/Newsletter.asp

Investorideas.com Disclaimer: www.InvestorIdeas.com/About/Disclaimer.asp Our sites do not make recommendations, but offer information portals to research news, articles, stock lists and recent research. Nothing on our sites should be construed as an offer or solicitation to buy or sell products or securities. We attempt to research thoroughly, but we offer no guarantees as to the accuracy of information presented. All information relating to featured companies is sourced from public documents and/ or the company and is not the opinion of our web sites. The site is currently compensated for by its "featured companies." SENSE Holdings, Inc. (OTCBB: SEHO) Four thousand dollars per month plus five thousand equivalent in shares, Law Enforcement Associates (AMEX: AID) one thousand dollars per month.

For more information contact:
Dawn Van Zant 800.665.0411
Ann-Marie Fleming 866.725.2554

Posted by Industrial-Manufacturing at 01:22 AM | Comments (0)

November 16, 2005

Lowfares.Com Travel Web Site Re-Launches as Premier Online Travel Comparison Research Site

The focus of LowFares.com's travel web site is to provide consumers with the first true, side-by-side comparison of discount travel prices from various travel sites, accessible from a single site. This saves the user time by eliminating the need to visit each site individually to perform their search since LowFares.com directly connects the user to the travel sites to compare the trips.

Redondo Beach, CA (PRWEB via PR Web Direct) November 16, 2005 -- The travel web site LowFares.com, originally launched in 2001 as an online travel agency offering discount airfare, hotels, car rentals and vacations, has re-launched itself as the premier travel product comparison research site for consumers looking for discount travel.

The focus of LowFares.com is to provide consumers with the first true, side-by-side comparison of prices from various travel sites, accessible from a single site. This saves the user time by eliminating the need to visit each site individually to perform their search since LowFares.com directly connects the user to the travel sites to compare the trips.

“We’ve radically changed our business model where we served consumers as an online travel agency, competing with other sites and earning revenue from each booking and made a fundamental shift to become an online travel marketing firm where LowFares.com works with other travel sites to promote those merchants,” said Joshua Lippiner, president of LowFares.com, a travel web site for discount travel.

From its launch in 2001 until recently, LowFares.com competed with Expedia, Travelocity and other similar sites utilizing deep partnerships with various back-end travel providers to handle the booking, ticketing and support. These companies included OneTravel.com, Hotwire and Priceline.com.

In 2004, recognizing that there was a major shift occurring in the online distribution of travel products with increased competition directly from the suppliers, LowFares.com began researching alternative business models to meet the increased demand for comparison travel shopping and discount travel.

“Our focus quickly centered on comparison shopping and finding ways to make the consumer’s ability to find travel easier,” Lippiner said.

In response to this, research was conducted to identify consumer pain points. The following pain points were found in this order:
1. Finding the best price
2. The number of sites people have to search to find the best price
3. The amount of time it takes them to search for the best price

LowFares.com also learned that the average consumer shops three sites, on average, before making a travel purchase.

LowFares.com executives concluded that consumers are essentially “feed-up” with researching travel online, since they have to spend so much time jumping back and forth between searching suppliers and online agencies. There are also sites that aggregate information from multiple sites called meta-searchers, but many consumers include those sites as another place they need to compare.

“With this knowledge, we developed the first, side-by-side comparison travel site for consumers, letting them directly connect to suppliers, agencies and meta-searchers. We save the travel shopper a considerable amount of time since they only have to enter their search once on LowFares.com, pick three sites they want to compare and then we launch those sites, run the shopper’s search and display the three sites side-by-side,” Lippiner said.

LowFares.com also recommends different merchants based on the user’s needs. For example, if a user is looking for a flight in the next 21 days, LowFares.com may recommend Hotwire as one of the sites for the best price. This would probably not be the case if the customer was leaving in six weeks.

LowFares.com re-launched this new air travel web site in August 2005 with Expedia, Hotwire, Priceline, LowestFare, CheapAir, TravelGrove, JetBlue and Kayak signed on as sponsors. In October 2005, comparison shopping for one-way air was added to the site capabilities and in November, LowFares.com will complete its re-launch with the release of comparison shopping for hotels.

LowFares.com currently allows the user to comparison shop directly for discount travel on dozens of travel sites including: Expedia, Bookings.net, Hotels.com, Lodging.com, Delta, US Airways, American Air, Continental, Northwest, ATA, FlyTed, Travelocity, Orbitz, Comfort Inn, Comfort Suites, Econolodge, Clarion and more.

About LowFares.com
LowFares.com, a travel web site, was created to make researching discount air, hotel, car rental and vacation packages simple online saving the consumer time and money. It is not an online travel agency. LowFares.com helps match users with the best travel site for their needs, and makes it easy to shop around. LowFares.com has created a way for consumers to simply search dozens of other sites from one place. Users enter desired travel information once and search multiple sites with one click.

LowFares.com’s Mission is to become the first destination on a consumer’s journey when shopping for discount travel options. For more information, visit www.LowFares.com.

Media Contact:
Josh Kahn
Kahn Travel Communications
516-594-4100
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 01:24 AM | Comments (0)

Keeping in Step With the Needs of Rework Technology

The electronics industry is now facing new demands in manufacturing to meet the lead free requirement. PDR-America has teamed up with Thermalogix Inc. to ease the transition providing rework systems that have better temperature control. The result is better yeilds in the over all manufacturing process.

Single Springs, CA November 16, 2005

PDR-America and Thermalogix, Inc. have joined forces to provide rework systems with the most accurate temperature delivery and monitoring in the marketplace today.

ThermaLogix provides its recently introduced and technically advanced non-contact sensor,the TL-75.

PDR-America’s proven IR technology is in the forefront when it comes to reworking micro-sized components prevalent in the lead free environment.

While many "make do" methods are being used to provide accurate temperature control, such as visually monitoring the solder at reflow or attempting to tack thermocouples to the PCB, they all rely somewhat on the user's skill or intervention. PDR-America has moved a step forward by now offering ThermaLogix’s unique non-contact pyrometer.

ThermaLogix TL-75 Series pyrometers measure the average temperature of just the target rather than measuring “spill over” areas adjacent to the target. In rework applications this means the TL-75 can accurately measure the temperatures of components as small as 2mm during both placement and removal. The TL-75’s integrated LED alignment beam illuminates the target, but unlike a LASER the TL-75 does not need a caution label.

The TL-75’s “operator safe” alignment beam also makes taking precise temperature measurements easy. The TL-75’s visible LED beam illuminates only the area to be measured. Rework professional can, with confidence and precision, know what area is actually being measured without having to calculate the distance from the target to the sensor (D:S Ratio).

The tight temperature control now possible with this instrument ensures that time/temperature ramp rates are accurate and the rework process repeatable.

By combining ThermaLogix’s patented thru-the-lens sighting with PDR’s patented focused IR rework systems, a new standard of controlled rework has emerged.

The new “Lead Free Soldering” challenge has mandated that higher rework temperatures become commonplace. To further complicate matters, small variances in temperature accuracy can lead to catastrophic results, exhibited by component failure, PCB de-lamination, etc. Never before has the need for accurate temperature sensing and controlled temperature delivery systems been more apparent than in Lead Free Rework!

PDR’s focused Infrared rework accuracy is achieved via two closed loop temperature feedback circuits. They are for the PCB and the component. Feedback measurements are taken real-time and take into consideration changes in the rework environment such as ambient temperature conditions, etc... Both component and PCB (top/bottom) IR heat is applied according to feedback from fast response sensors. Auto-profile software is a true auto-profile software due to real-time feedback provided by the fast response sensors.

Unlike conventional “black IR” or “hot air” rework methods, PDR’s patented technology and low mass component IR radiator provide close to zero lag time when component heating requirements follow a degrees per second change requirement as used in rework profiles.

PDR-America is proud to offer this new combination of technical excellence with all PDR model IRX-410Vi systems at no additional cost. That’s a savings of US$2,000.00.

This is a limited time offer. Some restrictions may apply.

For additional information contact PDR-America at USA 916 267-1895 or via
Email at e-mail protected from spam bots. You may also visit us at www.reworkservicesusa.com

Posted by Industrial-Manufacturing at 01:23 AM | Comments (0)

Okino’s PolyTrans Provides Conversion of All Major 3D CAD and DCC Files into the NGRAIN 3KO File Format

New 3D exporter allows Okino's PolyTrans to re-purpose all major 3D CAD and DCC file formats into NGRAIN 3D Knowledge Objects.

Toronto, Ontario (PRWEB) November 16, 2005 -- Okino Computer Graphics announced today that it is now officially shipping the newly developed NGRAIN exporter module with each copy of its PolyTrans and NuGraf software distribution, at no cost to current customers still within a valid maintenance period. This integrated module will allow NGRAIN customers to directly and robustly re-purpose complex 3D datasets from upstream applications into optimized datasets for NGRAIN's interactive 3D installation, maintenance and repair training solutions for the military and defense manufacturing markets.

NGRAIN users will be able to create 3D Knowledge Objects (3KOs) by converting native CAD packages and file formats such as ACIS SAT, Alias .wire, Autodesk Inventor, Autodesk AutoCAD and Mechanical Desktop, CATIA v4, CATIA v5, IGES (solids, surfaces and bounded surfaces), IronCAD, Parasolid, Pro/Engineer, Raindrop Geomagic, Rhino-3D/OpenNURBS, Solid Edge, SolidWorks, STEP, STL, XGL, VDA-FS and many other industry standard file formats and authoring/animation programs.

The new plug-in module will allow 3KOs to be exported from any application that currently supports the Okino PolyTrans converter interface and API, including the stand-alone Okino PolyTrans and NuGraf software, PolyTrans-for-MAX, PolyTrans-for-Maya, PolyTrans-for-XSI and other third party vendor software with integrated PolyTrans support.

“NGRAIN has become renowned as a major provider of interactive 3D training solutions for the aerospace, defense, and manufacturing sectors, whereas Okino has become well known as a major provider of 3D CAD, DCC and VisSim conversion technology for the same market segments over the last 17 years," said Robert Lansdale, President and CEO of Okino Computer Graphics, Inc. “It was a natural progression for Okino and NGRAIN to collaborate on the development on a tight pipeline between Okino 3D conversion software and NGRAIN’s interactive 3D training solutions. Rather than purchasing many disparate conversion utilities, packages and licenses, the Okino/NGRAIN collaboration provides customers with a one stop solution for funneling all major 3D data sources into NGRAIN software at a reasonable and fixed cost, with excellent hands-on customer support. I am pleased to see this new product offering as another result of our ongoing and evolving working relationship with NGRAIN."

“NGRAIN’s focus is to provide a complete end-to-end training solution. For our customers that have existing 3D models, we partner with companies such as Okino to provide a translation solution. With PolyTrans, our customers can quickly and easily convert most 3D file formats directly to the NGRAIN format” said Erik Kaas, Director of Strategic Business Development at NGRAIN. “Okino has been an NGRAIN partner for many years. Together, we provide a complete solution that allows our customers to repurpose existing 3D content for their downstream training needs."

Applicable WEB pages

The following are pertinent pages on the Okino WEB site relating to this press release:

http://www.okino.com/conv/exp_ngrain.htm = NGRAIN export converter documentation
http://www.okino.com/conv/conv.htm = PolyTrans home page
http://www.okino.com/nrs/nrs.htm = NuGraf home page
http://www.okino.com/conv/filefrmt.htm = Supported PolyTrans file formats

NGRAIN Export Converter Availability

The new NGRAIN export converter module ships for free with each v4.3.1 copy of Okino PolyTrans and NuGraf software. For upgrade or product pricing to v4.3.1, or to locate an authorized VAR or for customer inquiries, please contact Okino Computer Graphics at (905) 672-9328 or toll free at (888) 3D-OKINO (1-888-336-5466).

About Okino Computer Graphics

Founded in 1991 (Toronto, Canada), with development starting in 1988, Okino Computer Graphics, Inc. is an industry leader in the development and deployment of 3D data re-purposing software that allows professional 3D software users to intelligently and accurately convert/view/render/modify 3D data and assets between most major CAD, DCC and VisSim software packages. Okino software is used the world over by all major Fortune 1000 companies, 18 of the top 21 defense contractors, the top 17 automotive manufacturers, and thousands of production studios, 3D content creation, game development, CAD, engineering and product design companies (as broken out in the Okino customer user list at www.okino.com/conv/users.htm). For more information about Okino, please visit www.okino.com.

About NGRAIN

NGRAIN delivers interactive 3D training solutions to the defense industry. The company’s solutions accelerate installation, maintenance, and repair training on complex equipment and enable first-time-right repairs, resulting in greater operational readiness at lower cost. NGRAIN customers include the United States Army, the United States Air Force, the Canadian Department of National Defense, and Lockheed Martin. For more information about NGRAIN, please visit www.ngrain.com.

Attention editors. This document, as well as screen snapshots and related documents for the press, can be obtained electronically by visiting http://www.okino.com/press/magpics.htm

NuGraf and PolyTrans are registered trademarks of Okino Computer Graphics, Inc. Okino is a trademark of Okino Computer Graphics, Inc. NGRAIN is a registered trademark of NGRAIN (Canada) Corporation or its subsidiaries in the U.S. and Canada. Windows is a registered trademark or trademark of Microsoft Corp. in the United States and/or other countries. All other branded names, product names, or trademarks belong to their respective holders.

Posted by Industrial-Manufacturing at 01:22 AM | Comments (0)

Okino Computer Graphics Ships Second Generation of Precise, Solids-Based CATIA v4, CATIA v5 and ACIS SAT CAD Import Converters

New generation of CAD importers provide direct and dependable access to ACIS SAT files, native CATIA v5 files (using Dassault Systèmes technology) and CATIA v4 files for data translation, viewing, rendering & animation.

Toronto, Ontario(PRWEB) November 16, 2005 -- Okino Computer Graphics, a leading provider of high quality 3D data translation solutions to the enterprise Fortune 1000 market for over a decade, announced that its second major generation of precise solids-based CATIA v4+v5 and ACIS SAT CAD importers are now shipping. Based on components from Dassault Systèmes (the developers of the CATIA 3D modeling software) and Spatial Corp, the importers provide the most accurate and highest quality import conversions possible since they share the same runtime code as used by the CATIA v5 modeling software and the Spatial ACIS modeling engine. Recent newcomer companies to the data translation world use reverse engineered libraries to provide similar CAD import support whereas Okino uses the actual and official CATIA and ACIS libraries, and at lower costs to our customers.

When combined with Okino's CAD data optimization routines (for hierarchy & part count simplification), very complex assemblies can be imported, optimized, simplified, then re-exported to packages such as 3ds Max, Maya, Lightwave, SoftImage|3D and |XSI, Cinema-4D, OpenFlight/Creator, Renderman RIB, trueSpace and many others.

"This is one of our most important and crucial set of CAD importers for our PLM and large enterprise users, such as Boeing, GM, Ford and other key customers," said Robert Lansdale, President & CEO of Okino Computer Graphics, Inc., "My focus since initiating Okino software in 1988 has always been to provide the highest quality CAD data repurposing and conversion solutions, and to allow all disparate departments of large enterprise companies (such as engineering, design, marketing and support) to easily exchange product data without the need to rebuild their CAD datasets. With a huge number of existing CATIA and ACIS seats, our second generation of CATIA v4+v5 and SAT importers allow such users to easily repurpose their native CAD files to a dizzying number of downstream software applications and file formats supported by our PolyTrans and NuGraf packages. Downstream uses include product documentation and manual creation, animation and rendering software, visual communication and review of data, and for accessing simpler and easier to manipulate versions of the original CAD datasets. Our second major release is based on the ACIS R15 modeling engine and the newest Dassault Systèmes CATIA v5 runtime libraries. As such, these importers provide top notch and dependable performance. They have also been extensively field tested prior to this open release.”

Major Benefits of the CATIA and ACIS CAD Importers to Users of Okino's Software

· Supports CATIA v5 parts (.catpart) and assembly (.cadproduct) files, as well as the import of the assembly structure information.

· Supports CATIA v4 .model and .dlv (mainframe), .exp (export) and .session files. The .model files are generally used for one part files while .dlv and .exp files are used for multipart creation.

· Supports ACIS SAT (text) and SAB (binary) files up to ACIS R15 (the current release from Spatial).

· Many options to control the import of the data. Import by body, face, bodies + faces or bodies + shells + faces. This allows rendering materials to be applied at the finest granularity (faces) or the coarsest (bodies).

· Model healing (for CATIA v4) and erroneous surface repairs (for CATIA v4 & v5).

· Importing via the CATIA and SAT "solids-based" file formats ensure that adjacent NURBS patches are "stitched" together via topology information (BREP data) and thus creates "crack free" tessellation when the NURBS or parametric solids are converted to a polygonal mesh.

· Imports CATIA and ACIS SAT CAD file formats directly into the user interfaces of 3ds Max, Maya, XSI, Director, Cinema-4D, Quest-3D (and other third party programs) via native PolyTrans plug-in systems.

Applicable WEB pages

The following are pertinent pages on the Okino WEB site relating to this press release:

http://www.okino.com/conv/imp_catia4.htm = Okino CATIA v4 importer module overview

http://www.okino.com/conv/imp_catia5.htm = Okino CATIA v5 importer module overview

http://www.okino.com/conv/imp_sat.htm = Okino ACIS SAT importer module overview

About Okino Computer Graphics

Founded in 1991 (Toronto, Canada), with development starting in 1988, Okino Computer Graphics, Inc. is an industry leader in the development and deployment of 3D data re-purposing software that allows professional 3D software users to intelligently and accurately convert/view/render/modify 3D data and assets between most major CAD, DCC and VisSim software packages. Okino software is used the world over by all major Fortune 1000 companies, 18 of the top 21 defense contractors, the top 12 automotive manufacturers, and thousands of production studios, 3D content creation, game development, CAD, engineering and product design companies (as broken out in the Okino customer user list at www.okino.com/conv/users.htm). For more information about Okino, please visit www.okino.com.

PolyTrans and NuGraf are registered trademarks of Okino Computer Graphics, Inc. Okino is a trademark of Okino Computer Graphics, Inc. CATIA and SolidWorks are registered trademarks of Dassault Systèmes. ACIS and SAT are registered trademarks of Spatial Corp. All other brand names, product names, or trademarks belong to their respective holders.

Posted by Industrial-Manufacturing at 01:22 AM | Comments (0)

SEA Announces Expanded Role for its Authorized Service Providers

SEA Chairman, Michael Beason, announces changes to the Supplier Excellence Alliance Authorized Service Provider Program.

Irvine, CA (PRWEB) November 16, 2005 -- Michael Beason, Chairman of the Supplier Excellence Alliance (SEA) announced a new, expanded agreement for Authorized Service Providers throughout the U.S.

“These changes should make service providers very happy and will certainly help SEA to accelerate its outreach to small and mid-sized suppliers across the nation,” notes Beason. “SEA’s support of its Authorized Service Provider Program has become stronger than ever,” adds Beason.

The SEA Authorized Service Provider Program (ASP) supports the national deployment of the SEA Lean Enterprise System the standard business system for companies serving the aerospace, defense and space industry. The Lean Enterprise System has been adopted by SEA member companies -- the leading industry primes, tier-one suppliers and other supplier firms.

Authorized Service Providers are consulting firms and independent consultants that focus on the aerospace, defense and space industries. ASPs must complete a rigorous certification process in order implement one or more of the three tracks of the Lean Enterprise System – and ensure the high standards SEA has established for its delivery system.

SEA ASP certification allows certified consultants to integrate the industry standard model into their existing practice, expand their scope of work and gain national recognition for their support of the industry.

Key changes in the Authorized Service Provider program announced today provide for:

1. Expanded freedom for Authorized Service Providers to contract directly with supplier firms
2. Direct contracting with suppliers, using their own pricing structure for services
3. Outreach to suppliers with or without SEA involvement

About the Supplier Excellence Alliance

SEA is the Joint Program Office for the conversion of the aerospace, defense and space industry supply chain. SEA is a non-profit alliance of leading industry prime contractors, tier-one suppliers and key industry suppliers whose purpose is to accelerate supply chain performance.

To learn more about SEA visit the SEA website at www.seaonline.org.

Posted by Industrial-Manufacturing at 01:20 AM | Comments (0)

November 15, 2005

MAXjet, a New International Airline, Deploys SOA for Speed, Agility

How to launch an airline: demand, business strategy and technology.

Austin, TX (PRWeb) November 15, 2005 -- Launching an international airline is an endeavor that most find hard to comprehend. Calculating the demand, logistics, capital equipment, required alliances and customer care disciplines necessary for success creates a compelling case study and interesting read. Within these calculations of growth, profits and evolving business environments there exists enabling technologies that delivered significant and lasting value to MAXjet and its customers. Designing and developing solutions that utilize a Service Oriented Architecture (SOA) helped MAXjet innovate, connect and launch utilizing scalable and reusable technology.

Customer interaction through its Web site and reservation service is key to MAXjet’s cost effectiveness. MAXjet uses an innovative business model that incorporates Web services for its consumer Web site. “We deploy innovative technologies with sound customer care principals to build and maintain customer loyalty and confidence,” said Gary Rogliano, CEO. “The ability to support large transaction volumes while providing high-availability, scalability and instantaneous response to the customer was essential.”

To be able to change the Web site to a specific language, MomentumSI implemented internationalization, which is the process of designing an application so that it can be adjusted to various languages and regions without engineering changes. A fundamental feature that is particularly useful for the organization is that formatting, typesetting and hyphenation rules for all numbers, currency, time and dates are in the users’ native language.

Service Oriented Architecture (SOA) plays a larger role in many industry segments; the travel industry is quickly adopting Web services technology as an axiom. SOA is particularly valuable in building agility within the symbiotic travel ecosystem of related and required links that share information and ultimately make the customer’s travel a pleasant experience.

“SOA provides two major benefits,” said Jeff Schneider, CEO of MomentumSI. “It allows MAXjet to respond quickly to changes in the business environment, and it will lower future costs of development, maintenance and extension of business applications.”

About MAXjet
MAXjet is a luxury all-business-class airline dedicated to bringing greater value to the intercontinental market by connecting major cities with a high-quality, low-fare business class product. For additional information about MAXjet including its routes, fares and flight schedules, or to book travel, visit the MAXjet Web site at www.maxjet.com or call the airline’s toll-free number: in the US at 1-888-I-FLY-MAX (435-9629) or in the UK at 0800-023-4300.

About MomentumSI
MomentumSI has been at the forefront of business and technology consulting, continually setting new standards by designing and implementing integrated solutions that dramatically improve our customers' ability to drive business solutions. To learn how Momentum can assist you in building your Service Oriented Enterprise, visit our web site at www.momentumsi.com or call us at 888.886.8560.

MAXjet Contact:
Jean Swindell
Tucker & Associates
214-252-0900, ext. 24

MomentumSI Media Contact:
Hjalmer Danielson
(916) 294-0747

Posted by Industrial-Manufacturing at 02:32 AM | Comments (0)

Kozio, Inc. Joins Freescale Tools Alliance; Kozio Tools to Help Speed Time-To-Market, Reduce Cost of Test for Freescale Customers

Kozio, Inc., a leading provider of embedded software for system-level hardware testing, today announced it is a new corporate member of the Freescale Semiconductor Tools Alliance Program.

Longmont, Colo. (PRWEB) November 15, 2005 -- Kozio, Inc., a leading provider of embedded software for system-level hardware testing, today announced it is a new corporate member of the Freescale Semiconductor Tools Alliance Program. Kozio provides a comprehensive system-level test package for custom hardware platforms with fast delivery times for supported processors, including the Freescale PowerQUICC™ III family featuring the MPC8540, MPC8560, MPC8541 and MPC8555 processors.

“We're excited to join the Freescale Tools Alliance, and we look forward to supplying Freescale customers with a means of reducing the cost of test and getting to market more quickly while designing and manufacturing new electronic products,” notes Kozio President Joseph Skazinski.
The Freescale Tools Alliance Program is a worldwide network of industry-leading development tools vendors that provides a variety of solutions for Freescale customers. By forming this alliance with industry-leading development tools suppliers, Freescale helps bring the right solutions to its customers. The directory of program members can be accessed at www.freescale.com.

Kozio software is offered in several variations, along with supporting services:

- Manufacturing Test Software – kMfgTest
- Board Bring-up Diagnostics – kDiagnostics
- Power-On Self Test Software – kPOST

About Kozio, Inc.
Kozio, Inc. develops software solutions that verify design and validate hardware for embedded single-board computer systems used in products such as ADSL gateways, wireless access points, network routers, voice solutions, security and test equipment, and aerospace systems. Kozio's products provide comprehensive test solutions, including diagnostics for board bring-up, automated manufacturing test, and built-in self-test software for manufactured products. Kozio's customers design, develop and manufacture boards used in computer-based electronic systems for the aerospace, networking, defense, test and wireless industries. Kozio products ease many embedded systems development challenges, from design through manufacturing and support, saving customers time and money. The company is privately held and based in Longmont, Colorado. For more information, visit www.kozio.com.

Kozio and kDiagnostics is a registered trademark of Kozio, Inc. All other trademarks are property of their respective owners.

Contact: Joseph Skazinski, Kozio, Inc., (303) 776-1356, or Brad Shannon, Shannon Marketing Communications, (970) 461-4906.

Posted by Industrial-Manufacturing at 02:31 AM | Comments (0)

People on the Move: Dr Steven Windmill, Recently Recognised by Who's Who as One of the UKs Leading Businessmen, is Profiled by The Executive Club

People on the Move: Dr Steven Windmill, recently recognised by Who's Who as one of the UKs leading businessmen, is profiled by The Executive Club.

(PRWEB) November 15, 2005 -- Interview of the Month - Steven Windmill

By Raya Mamarbachi theexecutiveclub.com content manager

Interview with Dr. Steven Windmill
Dr. Steven Windmill during the last four years has planned and managed the £18 Billion “Defence Training rationalisation Programme” (DTR); the largest Business Process Re-engineering programme in Europe, for the Ministry of Defence. He has had roles in public and private companies, both large and small, and began his leadership career in the military; the pragmatism of the army and the various change management and turnaround projects that he has undertaken during the span of his career has led to where he is today.

So how did Steven get to where he is?
At 20 he joined the Territorial Army (TA) and became a civil servant. After a few years realised that he could do the job of his managers better than they could but, with no degree, he couldn’t move quickly up the ladder; so he enlisted at night school and received a degree in Philosophy. He later became involved in a Ministerial Initiative focused on improving the productivity of small and medium sized businesses. One degree was not enough for Steven; he obtained a first class MBA at Henley School of Management. Head-hunters soon began to call…Steven, inundated with offers, accepted a senior position within a global management consultancy owned by Sun Alliance. There he was constantly challenged in his role as ‘Director of Commercial Projects’.

Four years on he switched industries and became Head of Strategic Planning & Research for both the ‘Training & Enterprise Council’ (TEC) and ‘Business Link’, leading on marketing, strategic planning and business research; en route he acquired membership of the DTI’s ‘Six Wise Men’ resource targeting committee and was awarded a rare ‘Doctorate in Business Administration’.

In 2000 Steven felt he needed to experience the dotcom boom. Invited to join Europrospectus.com (an £8m information service to the global capital markets) he rapidly increased sales and aggressively promoted the brand. Leaving the dot.com at the time of the crash, he moved to the MOD, his remit to rationalise activities replicated across the armed forces; merging, integrating, rationalising and outsourcing services across the Royal Navy, Army, RAF and Police.

Steven is now a Lieutenant Colonel. Has his time in the TA helped him with his civilian career? Very much so! As an army officer he learned how to project his personality and install confidence; developing those dynamic leadership skills that win battles and underpin hyper-growth businesses. Military (especially TA) officers are by nature more flexible and capable of making effective snap judgements. According to Steven, when in a ‘crisis’, it’s often better to make an immediate decision so that your team has a plan to follow; rather then wait for that ‘perfect’ plan - along with demoralised staff, saying “…any plan is better than no plan…”.

When asked what qualities he would like to emphasise to a head-hunter/recruiter if they were to call…Steven feels that he does not fit a specific mould nor industry, but that the unifying factors are the way he copes with ‘challenges’, his wide experience, leadership and communication skills. His management style is obviously very much about ‘going out there and making things happen’. Throughout his life he has been propelled by the idea of ‘lead from the front’ by volunteering first, challenging the status quo, being open to new ideas and genuinely empowering and supporting his people; thus evolving and shaping the powerful and persuasive leadership and communication skills he commands today.

Steven joined The Executive Club to help identify his next challenge. He found the advertised positions to be ideal for his needs and, within two hours of using the CV Distribution Service, he received a call from a head-hunter regarding an unadvertised position with a base-salary of £220,000.

To contact Dr. Steven Windmill you can visit his website on www.stevenmwindmill.pwp.blueyonder.co.uk
www.omnetaplc.com
http://www.theexecutiveclub.com/member/library/article_view.aspx?thisArticle=101

Posted by Industrial-Manufacturing at 02:30 AM | Comments (0)

November 14, 2005

RAS (Remote Astronomical Society) Observatory Announces Second Free Web-based Seminar on Asteroid Hunting -- General Public Invited

Following closely on the heels of a very successful first event, the RAS Observatory has the distinct honor of presenting noted Canadian geophysicist, Andrew Lowe, on the subject of using the internet to discover asteroids. Lowe, currently is pending confirmation of his 100th asteroid discovery since January, will detail his scintillating encounters with space rocks. Further, Mr. Lowe goes into minute details of his unique strategies that have allowed him to achieve this remarkable performance.

Fountain Valley, CA (PRWEB) November 14, 2005 -- The RAS (Remote Astronomical Society) Observatory, in conjunction with Ivocalize.com, (www.ivocalize.com) a web conference hosting service, announced the second web-based seminar that will be available to the world-wide general public. The seminar titled, “Using the Internet to discover Asteroids”, is presented by Andrew Lowe (http://members.shaw.ca/andrewlowe/) and is being offered as a public service of the RAS Observatory. There is no charge for access to this seminar.

Here are the main points:
• Who: Presented by Andrew Lowe, (http://members.shaw.ca/andrewlowe/inthenews.htm)
• What: Web-based seminar on Asteroid Discovery Using the Internet
• Where: On your most convenient web connected computer via the internet
• When: Saturday, November 19, 2005 12:00 PM MST (19:00 UTC). Approximately 1 hour
• What: Here is an example of what can be accomplished using the internet as a resource

Those wishing to participate are required to join a Yahoo group specifically setup for this meeting. The link to that group may be found at http://www.ras-observatory.org/ras/Web_Seminars/web_seminars.html

All further information will be distributed only to those that sign up for this group. Questions should be directed to the email link provided.

The sponsors indicate that hundreds of attendees can be simultaneously accommodated to participate in this seminar. However, space is limited so interested parties are urged to sign-up immediately to guarantee a seat.

Martin Nicholson, director of the RAS (Remote Astronomical Society) Observatory, also commented, “Along with this series of seminars, the RAS Observatory is also offering additional programs to provide amateur astronomers with similar remote observing facilities currently only enjoyed by professional astronomers.”

An added attraction to the 5 sophisticated Takahashi telescope systems mounted on Paramount robotic mounts is their access to the pristine dark skies of New Mexico, USA.

In a technical vein some of the instruments are equipped with special filters and sensitive detectors that are typically beyond the financial means of many amateurs. By joining the RAS Observatory members can engage in some very specific types of research.”

RAS Observatory listed some of the additional benefits available to members:

• A support system for amateur astronomers to participate in scientific research
• Educational resources
• Assistance in developing meaningful projects
• Assistance in presenting findings and document research results
• Submission of papers
• Coordination of research projects
• Subsidizing special research rates for amateur research projects
• A platform to permit researchers to present work
• Recognition to researchers for achievements
• Coordinate amateur projects with professional projects
• Coordinate collaborative projects
• Completive projects to help develop skills
• Participate in web-based technical seminars

Mr. Nicholson continued, “This seminar is a continuation of our previously announced plans for future activities of the observatory. Now, international amateur researchers will be able to attend global meetings using the RAS Observatory resources from their respective locations through-out the world. This will allow many more individuals to participate, save a tremendous amount of time, reduce travel and accommodation costs and in general speed up the entire process of disseminating new technology and resolving many issues in a much shorter time frame.”

Posted by Industrial-Manufacturing at 12:34 AM | Comments (0)

Marotta Recognized for Quality Performance

Marotta Controls has been once again honored by the Defense Supply Center Columbus (DSCC) as one of the Government’s best suppliers.

Montville, New Jersey (PRWEB) November 15, 2005 -– Marotta Controls has been once again honored by the Defense Supply Center Columbus (DSCC) as one of the Government’s best suppliers.

The award was presented by Commander Navy Rear Admiral Charlie Lilli at an Automated Best Value System (ABVS) award ceremony, held during the Land & Maritime Supply Chain’s Business Conference and Exhibition.

“Marotta has been a supplier of superior fluid control solutions to the Department of Defense for over a half-century. We pride ourselves on our commitment to the excellence of our product and our service and we are pleased to once again be recognized as a Quality Supplier,” said Tom Marotta, Chairman and Chief Executive Officer of Marotta Controls. “This award is another great example of Marotta’s commitment to support the needs of our customer.”

Companies that qualify as ABVS award winners have met the stringent quality and delivery requirements established by the Defense Logistics Agency. The ABVS, a computerized system, collects a vendor’s past performance data and translates it into a numeric score, ranging from zero to a perfect 100. Marotta received a robust score in the range of 98.0 to 98.9 for their on-time delivery and quality rating.

DSCC, which is located in Columbus, Ohio, is known to more than 25,000 military and civilian customers and is teamed with more than 6,000 suppliers of weapons systems and spare parts. A field activity of DLA, which is in Ft. Belvoir, Virginia, DSCC manages more than 6 million orders annually and accounts for more than $2.8 billion in annual sales.

About Marotta Controls
Marotta Controls, Inc., a worldwide leader in control solutions, has over 200 patents and more than 60 years’ experience in providing customers with a wide range of fluid control systems for the most demanding applications in the marine, space, aerospace and weapons systems markets. For more information visit Marotta's website at www.marotta.com.

Posted by Industrial-Manufacturing at 12:33 AM | Comments (0)

November 13, 2005

Adacel To Provide Precision Approach Radar Training Systems to United States Air Force

Adacel will supply the Air Force with PAR capability for deployment in all of their 90 existing tower simulator systems in operation throughout the world.

Orlando, Florida (PRWEB) November 13, 2005 -- Adacel, an industry leader in software integration, simulation development, and voice recognition technology, has signed a purchase agreement to provide its Precision Approach Radar (PAR) simulation and training module to the United States Air Force. The agreement is valued at more than $1.6 million (USD).

Under the terms of the agreement, Adacel will supply the Air Force with PAR capability for deployment in all of their 90 existing tower simulator systems (TSS) in operation throughout the world. This new addition to the TSS system serves to further enhance its capability by integrating a voice-controlled module capable of training controllers on all aspects of PAR skills and techniques without the use of pseudo pilots.

Adacel’s PAR simulator supplies the comprehensive set of phraseology necessary to provide control instructions to aircraft conducting various PAR and Airport Surveillance Radar Approaches (ASR). The upgraded TSS system visually displays the radar pattern and the 3-D “out-the-window” screens allow tower and radar trainees to visually see and understand what is happening to the aircraft during landing.

“Adacel is extremely pleased to have been awarded this contract. We appreciate our strong working relationship with the Air Force, and look forward to integrating the PAR capability into their tower simulator systems throughout the world. Our PAR module is a mission-critical training tool that deploying air traffic controllers can use to maintain and develop their skills,” states Fred Sheldon, Adacel’s CEO. “Until now, it was difficult to find a PAR system that could be seamlessly integrated with existing systems. After significant testing and development, we have created a tool that does just that.”

The Adacel PAR simulator will enable USAF air controllers to maintain their proficiency on PAR operations at all USAF locations – stateside and overseas. The PAR skill set is used primarily in contingency settings.

Adacel’s PAR simulator also is available as a standalone system capable of supporting both fixed and mobile deployment environments.

About Adacel
Adacel is a global software technology and systems integration leader. The company is a leading developer of critical aviation (air traffic management), speech recognition, and defense simulation and security systems for government and business entities. Support services are available for all products including full-time, on site maintenance and operation of the systems.

Adacel’s products can be found in more than 30 countries. The company is committed to innovative research and development and industry leading customer support.

Adacel was established in 1987 and listed on the ASX in 1998 (ASX: ADA). The Company’s U.S. operations area headquartered in the I-4 Technology Corridor of Orlando, Florida. Adacel has offices in Washington, D.C., Montreal Canada, Melbourne, Australia and Manchester, United Kingdom.

For more information please visit us at www.adacel.com.

Posted by Industrial-Manufacturing at 11:39 PM | Comments (0)

Companies and Government Departments Donate Computers to Veterans, Elderly Institutions, and Army Related Groups During Rememberance Day Celebration

Refurbished and working computers collected from local companies such as Imperial Oil, The Brick, Office Depot, Calgary Tower, Telus Convention Center, and many others, are offered as donations to local veteran groups, Royal Canadian Legions, elderly home, and various Brigades and Reserves.

(PRWEB) November 12, 2005 -- Refurbished and working computers collected from local companies such as Imperial Oil, The Brick, Office Depot, Calgary Tower, Telus Convention Center, and many others, are offered as donations to local veteran groups, Royal Canadian Legions, elderly home, and various Brigades and Reserves.

Deepak Obhrai, MP for Calgary East said, "In a country and province where we so quickly change and upgrade our computer systems, the Electronic Recycling Association is meeting a growing need. Not only are you focused on reducing the amount of waste in our landfills, you have also found a way to impact both charitable donations and developing countries. I commend your innovative approach and thank you for your contribution to our country and to future generations."

Bojan Paduh, ERA president in Calgary, said, "Many Alberta and Vancouver based companies support our organization by donating old computer for donations to many valuable causes. We donate many computers to local charitable organizations, elderly homes, third world contries in need, and many other places."

During this holiday season ERA has made it a point to donate working computers to local Royal Canadian Legions, veterans, elderly homes and various youth army related groups.

Any interested organization and individuals that feel this is something that can help them are invited to contact the ERA, in Calgary, Edmonton, and Vancouver. ERA also has various volunteer and work experience program, that can earn you a computer, teach you about computers, and at the same time benefit the community and environment.

Bill Bonko, MLA for Edmonton Decore said, "I think the efforts by the Electronic Recycling Association of Alberta are to be commended. Keeping waste out of the landfills and allowing for 30 percent of the “used” computers to be put back into the community is on track and allows Alberta to remain a leader in recycling initiatives. The work that your association does is truly an act to follow. From one passionate recycler to another, keep up the excellent work."

Contact:
Electronic Recycling Association
www.era.ca
Calgary: 403-262-4488
Edmonton: 780-455-2088
Vancouver: www.era.ca

Posted by Industrial-Manufacturing at 11:38 PM | Comments (0)

People on the Move: Steven Windmill, Recently Famed by Who's Who has been Profiled by The Executive Club as a Leading Businessman, Strategist and Leader

The COO of an £18 Billion M&A and change management programme recently quit to become CEO of Omneta Plc, Europes only commercial supercomputer. He has links with Fuel-Europe, the eLeaerning firm based in Euston (London). First Who's Who and now The Executive Club profile shows him to be one of the UKs leading business thinkers and leaders.

(PRWEB) November 12, 2005 -- Dr. Steven Windmill planned and managed the £18 Billion “Defence Training rationalisation Programme” (DTR); the largest Business Process Re-engineering programme in Europe, for the Ministry of Defence. He has had roles in public and private companies, both large and small, and began his leadership career in the military; the pragmatism of the army and the various change management and turnaround projects that he has undertaken during the span of his career has led to where he is today.

So how did Steven get to where he is?

At 20 he joined the Territorial Army (TA) and became a civil servant. After a few years realised that he could do the job of his managers better than they could but, with no degree, he couldn’t move quickly up the ladder; so he enlisted at night school and received a degree in Philosophy. He later became involved in a Ministerial Initiative focused on improving the productivity of small and medium sized businesses. One degree was not enough for Steven; he obtained a first class MBA at Henley School of Management. Head-hunters soon began to call…Steven, inundated with offers, accepted a senior position within a global management consultancy owned by Sun Alliance. There he was constantly challenged in his role as ‘Director of Commercial Projects’.

Steven is now CEO of Omneta Plc the European supercomputer and retains a boardlevel interest in fuel-europe.

To contact Dr. Steven Windmill you can email or visit his website on www.stevenmwindmill.pwp.blueyonder.co.uk
www.omnetaplc.com
www.theexecutiveclub.com

--This Dr. Steven Windmill interview was conducted by Raya Mamarbachi theexecutiveclub.com content manager.

Posted by Industrial-Manufacturing at 11:37 PM | Comments (0)

Guaranteed Airport Parking Just a Click Away

Park 'N Fly Network virtual national airport parking lot makes travel merrier.

Atlanta, GA (PRWEB) November 11, 2005 -- Based upon recent reports, airport travel this holiday season is going to be one of the busiest and most crowded seasons ever.

To relieve the stress of finding parking at the airport, the Park ‘N Fly Network enables travelers to reserve a guaranteed parking space at many major U.S. airports. By booking their parking in advance at http://www.parknflynetwork.com travelers can now reserve parking at 46 facilities at 40 of the major U.S. airports nationwide.

Travel can be stressful. “During the busy holiday season, travelers will be able to enjoy peace of mind knowing that they have a guaranteed place to park,” said David Grocer, Park 'N Fly Senior Vice President of Marketing & Sales. “If you’ve booked your trip for the holidays, now’s the time to take care of your parking,” Grocer added.

Park 'N Fly, which launched the Network a year ago, has long been recognized as the nation’s industry leader with more than 35 years experience in off-airport parking. Known for its friendly staff and exceptional customer service, Park 'N Fly customers can expect secure and well-lit lots, convenient, quick and safe shuttle service, and cheerful luggage assistance. The long walks and long waits are eliminated, as frequent shuttles pick up and drop off travelers at their car every 3 to 5 minutes.

About Park 'N Fly
Park 'N Fly offers more than 25,000 parking spaces to travelers at 13 facilities and accommodates more than two million vehicles a year. Park 'N Fly is part of the BCD group of companies.

About BCD
BCD N.V. is the parent company of Park ‘N Fly. A Dutch, family-owned company, BCD focuses on the travel and financial services industries. Founded in 1975, BCD has 8,200 employees in more than 900 locations in 11 countries including North and South America and Europe.

For more information, visit http://www.parknflynetwork.com.

Posted by Industrial-Manufacturing at 11:36 PM | Comments (0)

November 11, 2005

Intelligent Production Machines and Systems Conference 2006 (IPROMS 2006)July 3-14, 2006

IPROMS 2006 is an online web-based conference organised by the EU funded FP6 IPROMS Network of Excellence coordinated by the MEC at Cardiff University. IPROMS 2006 allows people across the world to register as guest delegates and view paper abstracts and presentations and take part in online discussions, free of charge.

(PRWEB) November 11, 2005 - IPROMS 2006, the 2006 Virtual International Conference on Intelligent Production Machines and Systems, will take place on the Internet between 3 and 14 July 2006. IPROMS 2006 will build on the outstanding success of its predecessor, IPROMS 2005. Authors from 32 countries across five continents contributed over 100 papers to IPROMS 2005 and some 4168 registered delegates and guests from 71 countries participated in the Conference, making it a truly global phenomenon.

Like its predecessor, IPROMS 2006 will provide an unrivalled medium for researchers to disseminate and promote their work. For example, searches using Google for articles on topics related to IPROMS (such as Intelligent Manufacturing, Reconfigurable Manufacturing, Intelligent Design Systems, and Intelligent Planning and Scheduling Systems) regularly show papers by IPROMS authors among the top ten articles out of the millions of items found.

Papers submitted for IPROMS 2006 will be peer reviewed. Accepted articles and presentations will be accessible on-line by all registered attendees. Subsequently, papers will be printed in the book of proceedings by a major Publisher. Selected papers will also be developed into manuscripts for inclusion in a special issue of the Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture

Researchers worldwide are cordially invited to contribute original papers on topics pertinent to Intelligent Production Machines and Systems. The following
is a non-exclusive list of topics of interest to IPROMS 2006:

* Collaborative and Responsive Manufacturing Systems
* Concurrent Engineering
* Digital Manufacturing
* E-manufacturing, E-business and Virtual Enterprises
* Innovative Production Machines and Systems
* Intelligent and Competitive Manufacturing
* Intelligent Automation Systems
* Intelligent Decision Support Systems
* Intelligent Design Systems
* Intelligent Optimisation Techniques for Production Machines and Systems
* Intelligent Planning and Scheduling Systems
* Intelligent Supply Chains
* Mechatronics
* Micro/ Nano Electro Mechanical Systems (MEMS/ NEMS)
* Novel Human Machine Interfaces including Tangible Acoustic Interfaces (Tai Chi)
* Reconfigurable Manufacturing Systems
* Robotics
* Sustainable Manufacturing Systems

In addition to regular sessions, IPROMS 2006 will also include special sessions of 6-12 invited papers. Suggestions for special session themes within the scope of IPROMS 2006 are welcome.

IPROMS 2006 Call for Papers

The deadline for full paper submission is 15 December 2005.

Posted by Industrial-Manufacturing at 12:36 AM | Comments (0)

SportairUSA to Showcase StingSport at McKinney Texas EAA Sport Pilot Tour November 12 and Extend Complimentary XM Satellite Services

SportairUSA LC, North American distributors of Light Sport Aircraft (LSA) including the StingSport, headlines this Saturday’s EAA Sport Pilot Tour aircraft exhibit in McKinney Texas. StingSport, the premier performance, best-equipped and safety conscious value in Light Sport Aircraft (LSA) will showcase to the public 24 new standard features announced at the AOPA Expo 2005 in Tampa.

Little Rock, AR (PRWEB) November 11 -- SportairUSA LC, North American distributors of Light Sport Aircraft (LSA) including the StingSport, headlines this Saturday’s EAA Sport Pilot Tour aircraft exhibit in McKinney Texas. StingSport, the premier performance, best-equipped and safety conscious value in Light Sport Aircraft (LSA) will showcase to the public 24 new standard features announced at the AOPA Expo 2005 in Tampa.

The SLSA certified StingSport became the first LSA last week to integrate the Garmin GPSMAP into its instrumentation panel. While delivering unparalleled situational awareness through XM WX Satellite Weather™, the GPSMAP 396 also offers 130+ channels of entertainment via XM Satellite Radio. StingSports purchased at this EAA Sport Pilot Tour event will receive a complementary 1 year subscription for both of these XM services. Attendees have the opportunity to also view the aircraft’s innovative full time carburetor heating system which extends enhanced safety without the power degradation associated with traditional designs.

22 additional new features augment the StingSport’s already well-equipped standard feature package, including the first ever standard LSA Ballistic Recovery Parachute System. LSA enthusiasts are invited to experience the StingSport first hand at the Collin County Regional Airport (TKI) this Saturday or visit http://sportair-usa.com/stingprices.htm for more information.

SportairUSA distributes exceptional international light sport aircraft via an unparalleled regional sales and service dealer network throughout North America.

With the goal of educating and creating nationwide awareness of the new opportunities available in the rapidly growing Sport Pilot / LSA field, the EAA brings the Sport Pilot Tour regionally to its members and those desiring to fly. More information on the EAA and Sport Pilot Tour can be found at http://sportpilot.org.

Posted by Industrial-Manufacturing at 12:35 AM | Comments (0)

eCycle Awarded Contract to Provide Brushless Fan Solution to Aurora Flight Sciences

eCycle provides brushless motors for Tactical Unmanned Aerial Vehicle (TUAV).

Temple, PA (PRWEB) November 11, 2005 -- eCycle announced today that is has been contracted by Aurora Flight Sciences, located in Manassas, VA, to provide lift fan motors and controllers for an unmanned aircraft.

Under the contract, eCycle, Inc. is designing and building brushless motors based on its CMG ‘Silicon Series’ brushless motors. The fan motors and electronics will be integrated into Aurora’s Excalibur Tactical Unmanned Aerial Vehicle (TUAV). The Excalibur platform will feature a Williams International jet engine for main propulsion and three eCycle brushless fan drives for additional lift and attitude control. This platform is intended to demonstrate Aurora’s new VTOL (vertical take off and landing) technology.

About eCycle (www.ecycle.com)
Established in 1996 and located in Temple, PA, eCycle produces a line of advanced brushless motors and generators, which have a wide range of applications in commercial, industrial, and consumer markets worldwide, particularly for mobile applications.

About Aurora Flight Sciences (www.aurora.aero)
Aurora Flight Sciences is a leader in unmanned aerial vehicle technology for research, defense and homeland security organizations. For more than 15 years, Aurora Flight Sciences has expanded the limits of unmanned flight through the design and manufacture of innovative aircraft.

Posted by Industrial-Manufacturing at 12:34 AM | Comments (0)

November 10, 2005

Veterans Day Forum – Personal Insights on Veterans Day at VetFriends.com

With Veterans Day approaching, VetFriends.com - the premier website for reuniting veterans - has created an online Veterans Day Forum reaching out to veterans and anyone else interested in contributing their thoughts and insights in regard to our military personnel and Veterans Day. Personal stories, sentiments and words of thanks can be found online in a Veterans Day collection throughout November for all to view at vetfriends.com/veteransday. VetFriends.com invites members of the media to visit the forum and utilize the quotes in their Veterans Day news stories.

Charleston, SC (PRWEB) November 10, 2005 -- With Veterans Day approaching, VetFriends.com - the premier website for reuniting veterans - has created an online Veterans Day Forum reaching out to veterans and anyone else interested in contributing their thoughts and insights in regard to our military personnel and Veterans Day.

Personal stories, sentiments and words of thanks can be found online in a Veterans Day collection throughout November for all to view at www.vetfriends.com/veteransday. VetFriends.com invites members of the media to visit the forum and utilize the quotes in their Veterans Day news stories.

A few favorite quotes from the Veterans Day forum:

“I thank you veterans for not being selfish with your lives and believing in our nation's freedom. May we laugh, cry and remember on this day, November 11th, our experiences and memories.” R. Zelonis

“Veterans Day to me is one of the most significant and memorable days of the year. I pause and reflect on my own service time, my buddies whom I miss always, my family's collection of Veterans, and I thank all those who have ever served to protect this country.” D. Chevalier

“A profound salute and thank you to all who have taken the stand of Soldier, Airman, Sailor, Marine, Coast Guardsman. Thankful then, now, and forevermore! Everyday is Veterans Day. Good luck, God Bless.” K. Godsey

“Veterans Day is a day of recognition to the ultimate sacrifices of men and women that have served their nation in protection of the freedom that all Americans enjoy every year.” C. Vela

VetFriends.com currently has over 590,000 members, attracting over 150,000 visitors per month to its website…and the number is rapidly growing! Support, honor and celebrate our US military personnel and veterans with VetFriends.com.

For further information and/or interview opportunities please contact founder Dale F. Sutcliffe at 1-843-856-2863

Posted by Industrial-Manufacturing at 01:08 AM | Comments (0)

Saluting the Military at the Performance Race Training Center

The Performance Race Training Center has announced that the month of November is “Salute to the Military” month.

Irwindale, CA (PRWEB) November 10, 2005 -- The Performance Race Training Center has announced that the month of November is “Salute to the Military” month.

To thank America’s Heroes, The Performance Race Training Center is offering discounted Racing Adventures for Military personnel and their families during the entire month of November 2005. The Performance Race Training center is increasing their regular military discount to 30% off regular prices this month only. “We are offering double the discount this month as a way of honoring our Military.” Hugh Schenkel, VP Operations was quoted, “They work very hard every day, and we just want to offer them the opportunity to come play hard down at the Track.”

Adrenaline junkies can experience the awesome excitement of driving an actual 450 HP NASCAR stock car at legendary Irwindale Speedway, considered by most to be "the best short track in America". The Performance Race Training Center gives participants, regardless of their skill level, a chance to personally experience the full throttle spectacle of NASCAR stock car racing. Programs begin with classroom instruction, where drivers learn the “ins & outs” of stock car driving, and then into the fire suits and out onto the track! Racing packages range from 10 to 40 laps. Or for the ultimate thrill, choose the “Super Ride”, which allows you to ride Shot Gun next to one of our professional drivers at the wheel.

“Race Passes” and official NASCAR merchandise collectibles are also available and make unforgettable gifts. From Race Pass Adventures to all the necessary gear, it’s all here for your personal, family and group racing experience. Located where the 210 & 605 freeways meet in Irwindale, California, Performance Race Training Center is open year-round, Monday through Saturday, from 8am to 5pm. Call (877) 901-RACE for further information, or visit their website at www.RaceTrainingCenter.com

Distributed By Marketing Online Crash Course at www.MarketingOnlineCrashCourse.com

Posted by Industrial-Manufacturing at 01:07 AM | Comments (0)

November 09, 2005

Law Enforcement Training Group Provides Defensive Training and Edged Weapon Awareness to Police

No Lie Blades provides law enforcement personnel with the knowledge and skills they need to ensure safe-being during the performance of their duties. They are an official Government Vendor and approved GSA Supplier of defensive training knives and combative training programs designed to improve awareness and defensive skills among law enforcement operators.

Viejo, CA (PRWEB) November 9, 2005 -- No Lie Blades is the first and only edged weapon and defensive tactics training program capable of providing law enforcement officers with the instant knowledge and experience needed to permanently improve all areas of their defensive tactical skills. Both the training blades and on-site instructional programs are designed for police, security, SWAT, corrections personnel, and other high risk operators who want to gain the skills necessary to prevent injury and/or death during mission critical and routine operations.

All seminars and training courses are built around the unique capabilities of the No Lie Blades training knife, a unique marking system and training blade designed for rapid learning environments where performance is instantly measured and improved.

The training blades incorporate an innovative felt-edged marking system, dispersing an ink mark from the edge of the blade where the cut would be. Designed with the feel and attributes of a real knife, all No Lie Blades training tools allow professionals to instantly validate and improve their tactical defensive skills. The training blade instantly heightens awareness to life-saving factors such as unrealistic blocking methods, range and targeting considerations, situational readiness, and the most important benefit of all - the true lethality and danger of a committed knife attack.

The No Lie Blades edged weapon certification programs and advanced training courses for law enforcement have been put together from the collaborative team work of the top police and military training instructors worldwide. The No Lie Blades instructor team combines years of real-world experience, skill and creative ideas to continually develop the best training tools and on-site instructional programs available.

The law enforcement training programs are designed to work with the unique strengths of each individual, to ensure they reach their full potential through life-changing mental and physical transitions that make an instant and measurable impact to personal and defensive readiness. All No Lie Blades training systems, Command Certification programs, and Special Response Team courses introduce team members to the most advanced personal combatives and edged weapon defensive tactics available. Each instructional program is customized around command objectives, with final course curriculum and tactical training modules determined by operational requirements.

The No Lie Blades Instructor Division also provides advanced training certifications for all tactical and combative knife needs, including program courses for armed forces, fast entry groups, Special Forces, and other high-risk units.

For course availability and product information, visit the No Lie Blades website online at www.nolieblades.com, or call Hank Hayes at 1-877-725-2337.

Posted by Industrial-Manufacturing at 12:10 AM | Comments (0)

Department of Homeland Security Continues to Infringe on Whistleblower Rights, ACLU/SC Says

The ACLU of Southern California seeks to enjoin a new Department of Homeland Security policy relating to Federal Air Marshals' free speech rights that like the previous directive overly restricts speech and is likely to continue to jeopardize public safety.

Los Angeles, CA (PRWEB via PR Web Direct) November 9, 2005 -- The ACLU of Southern California is seeking to enjoin a new Department of Homeland Security policy relating to Federal Air Marshals' free speech rights that like the previous directive overly restricts speech and is likely to continue to jeopardize public safety.

"The new policy does nothing to ease the chilling effect on whistleblowers' speech," said Peter Eliasberg, Manheim Family Attorney for First Amendment Rights at the ACLU of Southern California. "The policy is still unconstitutional and leaves air marshals in the untenable position of not knowing whether they have First Amendment rights to participate in public discussion that could improve the safety of the airline industry."

The motion filed today seeks a temporary restraining order in advance of a House Committee on the Judiciary report pertaining to its investigation of the mismanagement of the Federal Air Marshal Service by the current administrators. The current air marshal rules could prohibit Frank Terreri, Federal Law Enforcement Officers Association (FLEOA) Federal Air Marshals Agency President, from commenting on the report despite his prominent role as the FLEOA FAM Agency President and an informed critic of the FAMS.

The director of FAMS has personally initiated four investigations of Terreri -- two after the lawsuit was filed. As a result, portions of the motion for a restraining order are being made under seal since the Department of Homeland Security warns employees that any release of information about an investigation may result in discipline or criminal action.

In the original lawsuit (ED-CV 05-320er - (SGLx) Central District; California) dubbed Air Marshal X, filed in April against Department of Homeland Security Secretary Michael Chertoff and other security officials, Air Marshal Frank Terreri challenged Federal Air Marshal Service rules that prohibited Terreri from speaking publicly about
his job or saying anything to do with the Air Marshal Service, a clear violation of his First Amendment rights.

The Office of Professional Responsibility concluded the original rules were "unenforceable as written." In July, the Department of Homeland Security issued a new directive purporting to honor the free speech rights of Federal Air Marshal employees. At the end of August, Terreri amended his lawsuit to also challenge the constitutionality of the new policy.

"The new policy of the Department of Homeland Security simply repackages the original unconstitutional restrictions in different language," said Professor Allan Ides of Loyola Law School. "The biggest loser is the public, which is denied information on critical policy matters."

Terreri has 15 years of law enforcement experience with an unblemished record. For the past three years he has been a federal air marshal and is also the Federal Law Enforcement Officers Association Federal Air Marshal Agency President, an organization that represents more than 24,000 federal agents including approximately 1,500 air marshals.

Last year Terreri was taken off active flight duty and placed on administrative duty after he sent a private e-mail to another air marshal raising concerns about an air marshal profile in People
magazine. He was returned to active flight duty the day after filing the lawsuit in April. He learned he was cleared of the first investigation and the charges were unfounded only after filing a Freedom of Information Act Request.

The ACLU of Southern California, Professor Allan Ides of Loyola Law School and Paul Hoffman of Schonbrun, DeSimone, Seplow, Harris and Hoffman are representing Terreri.

Contact:
Elizabeth Brennan
ACLU of Southern California
Media Relations Manager
(213) 977-5252
http://www.aclu-sc.org/News/

Posted by Industrial-Manufacturing at 12:10 AM | Comments (0)

QuantumSphere to Fundamentally Alter Battery, Fuel Cell Markets

QuantumSphere, Inc. to fundamentally alter battery and fuel cell markets-- files two patents-- development enables increased power and efficiency at lower production costs.

SANTA ANA, CA, U.S.A. (PRWEB) November 9, 2005 -- QuantumSphere, Inc., the leading manufacturer of metallic nanopowders for applications in aerospace, defense, energy, electronics and other markets demanding advanced material applications, announced it filed two patents related to the fuel cell and battery industry allowing for customization of nanometallic-additives for increased power and efficiency. The first patent supports the company’s existing technology framework that will enable battery and fuel cell manufacturers to address novel methods to produce uniform air cathodes. Unique, proprietary features in nanopowder handling enables the production of air cathodes in small test sample sizes up to continuous production capability using the same apparatus, thereby enabling battery manufacturer’s R&D facilities to accomplish complex experimental designs related to gas electrode development while enhancing scale-up capability of resulting designs.

The second patent addresses gas diffusion electrodes for the fuel cell and metal air battery industry using nano-sized transition metal catalysts and alloys. These nanometal-containing cathodes can be used in conjunction with a variety of types of battery and fuel cells, including Zn/air, Li/air, hydrogen and direct methanol fuel cells. In addition, they are flexible and may conform to a variety of surface contours, allowing for more freedom in cell design to power a wider variety of devices.

“This technology allows QuantumSphere to provide customers the capability of developing and verifying cathode designs specific for their applications. For example, a methanol fuel cell and a zinc air battery have very different power and voltage requirements,” Robert Dopp, President, DoppStein Enterprises, Inc. “Ratios of QuantumSphere-produced nanocatalysts can be optimized using this technology. The resulting cathodes use catalysts never tested before because the method to make small cathode samples did not exist, but also because, until recently, no one knew how to make the metallic nanopowders uniformly and in quantities large enough to test. QuantumSphere and DoppStein Enterprises, Inc, working in partnership, have resolved both of these issues. These inventions will lead to more efficient and more powerful fuel cells and metal air batteries using QuantumSphere’s nanocatalyst and powder handling process.

“This new cathode making process, coupled with the addition of highly active catalyst is invaluable for the production of high-power density fuel cells and batteries which are streamlined and can be tailored to a wide array of devices-- thereby providing significant performance advantages in the next generation cell phones, cameras, and other portable electronics,” said Dr. Kimberly McGrath, Director of Fuel Cell Research, QuantumSphere, Inc. “QuantumSphere will continue to work with world-class partners, such as DoppStein Enterprises and others, to research, develop, produce and ship alternative catalyst products on a mass scale at a fraction of the cost,” Dr. McGrath added. As Director of Fuel Cell Research, Dr. McGrath also tailors catalysts for various cell types and operating temperature regimes, and designs new fuel cell systems for small, portable applications that will be efficient at room temperature with minimal catalyst loading. For more information on QuantumSphere’s products, visit http://www.qsinano.com/products.html. Sales and technical services personnel can be reached at 714-545-NANO (6266).

About QuantumSphere, Inc.
QuantumSphere is the leading manufacturer of metallic nanopowders for aerospace, defense, energy, electronics, and other markets demanding advanced material applications. QuantumSphere’s exclusive manufacturing process provides consistent and narrow particle size distribution, low levels of agglomeration and impurities, a custom-tailored oxide shell thickness, and the highest purity metallic nanopowders on the market that are easier to transport and handle. The company accomplishes this without compromising its commitment to the environment and the community. No other company offers these performance advantages.

QuantumSphere is the only supplier of the world’s highest quality magnetic, conductive and catalytic metallic nanopowders, including QSI-nano™ nickel, silver, copper, cobalt and other proprietary nanoscale alloys. QSI-nano™ alloys will ultimately replace platinum as the main catalyst in a variety of fuel cells and battery electrodes, providing a renewable source of power to supply the world’s energy needs. The company is leveraging its leading market position in metallic powders to manufacture and ship materials and devices for applications in batteries, fuel cells, conductive inks, magnetic coatings and membrane filtration devices. For more information, visit www.qsinano.com or contact Joe Romano, Partner, HighGround, Inc. at 781-279-1320 x 208.

Posted by Industrial-Manufacturing at 12:09 AM | Comments (0)

Optical Alchemy Strengthens Management Team, Names Jennifer Richardson Vice President of Engineering to Address Military Unmanned Aerial Vehicle Market

Ms. Richardson will leverage her experience in systems engineering and product development to drive the company’s strong track record as a manufacturer and provider of products to address the unmet needs in the 5-50 lb. UAV payload market.

Maynard, MA (PRWEB) November 9, 2005 -- Optical Alchemy, Inc., the leading developer and manufacturer of ultra-light, inertial, stabilized sensor systems for unmanned vehicles, announced it appointed Jennifer Richardson as the Vice President of Engineering. In this position, Ms. Richardson will leverage her experience in systems engineering and product development to drive the company’s strong track record as a manufacturer and provider of products to address the unmet needs in the 5-50 lb. UAV payload market. Ms. Richardson brings over 20 years of R&D experience, and a history of doing business with military branches and associated research facilities, to Optical Alchemy, Inc. The news follows the company’s previous announcement regarding the availability of Optical Alchemy’s new, ultra-light, 2-Axis Sensor payload (i.e., gimbal / turret), the KJ-600, for field trials and deployment. KJ-600’s comprehensive and flexible payload includes an infrared camera (IR), visible zoom camera, laser marker, onboard IMU, GPS and digital compass. Options include a laser range finder (LRF). KJ-600 provides accurate longitude/latitude pointing, weighs only 4 lbs. with its enhanced integrated sensor payload, and allows for 50-60 lbs. of additional payloads, such as fuel, ammunition, or multiple sensors, in existing or new UAVs.

“Ms. Richardson’s addition will augment a seasoned team of engineering veterans as Optical Alchemy continues to experience unprecedented customer demand for the company’s products that serve our military clientele,” said Marc Daigle, President, Optical Alchemy, Inc. “Ms. Richardson will continue to drive our technology and product development strategy to provide the U.S. military with new capabilities to perform new missions in formerly denied areas on the battlefield,” Daigle added.

“I am extremely pleased to serve as Vice President of Engineering at Optical Alchemy, Inc.,” said Jennifer Richardson, Vice President of Engineering, Optical Alchemy, Inc. “I am honored to build and lead a diverse, world-class technology team that has achieved unprecedented initial success making products that fill the sensor void in the UAV market between the Dragon Eye and Shadow Class UAVs,” Richardson added.

Ms. Richardson previously served as Vice President of Engineering for Diversified Optical Products (DiOP), producing thermal imaging systems and optical products. Ms. Richardson has program management experience with large corporations such as Loral and Lockheed Martin (NYSE: LMT), as well as senior management experience with Alcatel (NYSE: ALA) and next generation communication equipment start-up organizations that grew through successful acquisition. Her technical expertise includes more than 20 years of experience in systems engineering and product development for infrared imaging systems, radiometers and missile seekers.

Optical Alchemy’s KJ-600 enables UAVs in the Shadow and smaller class to significantly improve their endurance and sensor payloads, thereby meeting the needs of many unmet missions. KJ-600 will follow open architecture standards such as STANAG 4568 and our IP based architecture supports future net-centric open communications requirements necessary for manned and unmanned vehicle communications needs.

About Optical Alchemy, Inc.
Optical Alchemy, Inc. is a developer and manufacturer of ultra-lightweight, high performance stabilized sensor systems for unmanned vehicles. The company’s products will create a new level of persistence, enabling UAVs to dramatically expand mission ranges, save fuel, remain in the air for longer periods of time to patrol vast areas and carry additional sensors and ordinance.

The company’s small, ultra-light high performance stabilized sensor systems offer the payload flexibility, inertial stabilization and high pointing accuracy required for sense and respond missions. Optical Alchemy’s system provides configurable payloads including high resolution IR and visible sensors, laser range finder (LRF), laser marker, laser designator or a user-defined custom sensor suite. Onboard IMU, GPS, digital compass and the inertial control system provide accurate latitude/longitude/elevation pointing and, combined with the LRF, target mapping. For more information, visit http://www.uavpayloads.com or contact Joe Romano, Partner, HighGround, Inc. at 781-279-1320 x 208.

Posted by Industrial-Manufacturing at 12:08 AM | Comments (0)

Direct Part Marking in the Aerospace Industry

Part identification and traceability are important in many industries, but probably none more so than aerospace where safety is the highest priority. It has been recognised that the most effective way to ensure complete traceability is to directly mark a part with a machine-readable code and track it through its entire life cycle. This is known as Direct Part Marking – sometimes referred to as Machine Readable identification.

(PRWEB) November 9, 2005 -- Direct Part Marking is now being adopted across many industry sectors, and in particular the aerospace industry where there is a mandatory DoD (Department of Defence) requirement for UID (Unique Identification) on all equipment it purchases.

Unique Identification of items is achieved by marking each qualifying item with a machine-readable identification code. The data matrix is encoded with data elements necessary to construct a Unique Item Identifier (UII), which is globally unique and unambiguous.

Imaje has been working in close co-operation with many major aircraft part manufacturers to demonstrate how inkjet technology can be used to achieve machine readable identification, whether to meet specific international standards, or to satisfy customer’s higher quality expectations.

Many coding applications require some degree of customisation to achieve a reliable and effective solution. The inkjet printer is a “standard” piece of hardware, but its versatility is enhanced considerably with ancillary products such as bespoke software, a unique handgun attachment and a wide range of inks.

Part handling is “key” to enable a reliable inkjet action to take place. The differing sizes and shapes of components and parts within a manufacturing sector such as aerospace do not often lend themselves to a conventional production line coding method. The Imaje handgun simplifies both part handling, as well as part coding, by offering the flexibility of a manual coding method, as and when required. Large parts can be coded “in situ”, whilst with smaller components, a code can be accurately located within a limited space.

Barcoding (both one dimensional [1D] and two dimensional [2D]) provides an accurate and easy method for data usage and storage in the aerospace industry. The use of intelligent electronic de-coding can significantly improve the accuracy and speed of data exchanged with minimal, or no, manual input.

Whereas 1D barcodes are widely used in label or packaging applications, 2D Data Matrix codes have been quickly adopted in industries where a lot of information has to be stored in a small amount of space. Consequently, 2D Data Matrix codes are used in Direct Part Marking applications, not only because of their ability to store the large amounts of information required for UID, but also for their high degree of error correction capability thereby reducing the number of identification failures. Each Data Matrix code consists of equal size squares or elements in a 2D array. The size of the data matrix code can easily be adjusted by changing the size of the individual elements. The code can, therefore, be made very small, but still hold all the data required; ideal for marking small components.

The task of reading 2D codes has traditionally been the exclusive domain of machine vision systems which are relatively expensive. However, the introduction of lower cost plug and play image scanners and smart cameras, has enabled the widespread adoption of 2D technology.

Imaje has many years’ experience of working with suppliers in the aerospace industry, developing both inks and software to enable them to comply with strict regulations for part identification. The Imaje Aerospace Part Marking system (APS) takes all the relevant components necessary for Direct Part Marking to provide a Total Solution to aerospace suppliers.

The APS package comprises an inkjet printer, a PC, a 2D Data Matrix scanner, a handgun and bespoke software that conforms to ATA Spec 2000 and Department of Defence standards.

The application allows the operator to print 2D Data Matrix codes, serialised or non-serialised, and check these codes using the 2D reader ensuring readability of the marks. Information can be input into the system either using the 2D reader, the on-screen keypad or with an optional 1D barcode reader, in the event that key information is already stored in a 1D barcode, eg from a job sheet.

The new Imaje 9000 has already made its mark in the aerospace industry. It is capable of delivering the highest quality codes on a variety of substrates, particularly painted surfaces, and with its compact and portable design, it is ideal for moving around the production floor as and when required. The patented Jet Speed Control technology of the 9000 monitors the print quality irrespective of the relationship of the printhead to the level of the ink system, thus ensuring consistently high print quality – whether used on a production line or manually, with the handgun.

No Direct Part Marking package would be complete without relevant consumables and, to this end, Imaje have developed a wide range of inks that have been qualified for use specifically in the aerospace industry.

Posted by Industrial-Manufacturing at 12:07 AM | Comments (0)

November 08, 2005

Symmetricom Announces Enhanced Militarized Rubidium Oscillator

8130A’s low phase noise outputs provide higher signal-to-noise ratio, combine long and short term stability for tactical communications, navigation and identification.

San Jose, CA (PRWEB via PR Web Direct) November 8, 2005 -- Symmetricom, Inc. (NASDAQ:SYMM), a worldwide leader in precise time and frequency products and services, today announced a low phase noise option for Symmetricom 8130A, an enhanced version of their popular M-100 rubidium oscillator. This off-the-shelf militarized rubidium oscillator provides excellent overall performance for numerous tactical applications, and excels particularly for systems requiring good phase noise under vibration.

“This enhanced rubidium oscillator’s low phase noise outputs combine long term stability as well as improved short time stability,” commented Doug Lowrie, product marketing manager at Symmetricom. “The low phase noise option provides higher signal-to-noise ratio allowing for improved signal detection in doppler radar systems and in time difference of arrival measurement. It provides excellent overall performance for numerous tactical applications where shock, vibration, humidity and other environmental factors are a challenge.”

The circuit boards of the 8130A are conformal-coated for moisture resistance, and special precautions are taken for improved shock vibration hardening. Use of a filtered power/monitor connector minimizes EMI emissions and susceptibility. Designed for ease of integration into frequency and timing systems, the 8130A offers a smaller size MIL atomic frequency reference with a heritage of over 25 years of proven experience in the design, qualification and production of atomic frequency references.

The long life rubidium lamp and extended crystal oscillator control range of the 8130A minimizes maintenance requirements. The unit includes an RS-232 digital interface for monitoring and frequency adjustments.

Other key features of the 8130A include 1) modern militarized design, 2) 5 and 10 MHz sinewave outputs, 3) ruggedized high performance Rb physics package and 4) internal temperature compensation option.

The 8130A is ideal for use in tactical applications including ground, shipboard and airborne navigation and timing applications where environmental factors are a challenge.

Pricing and Availability

The Symmetricom 8130A will be available October 2005. Pricing begins at $11,500 USD.

For more information please visit: www.oscillator.symmttm.com.

About Symmetricom Inc.
As a worldwide leader in precise time and frequency products and services, Symmetricom provides “Perfect Timing” to customers around the world, including communication service providers, network equipment manufacturers, US Department of Defense (DOD), aerospace contractors, enterprises, governments and research facilities. Since 1985, the company’s timing, frequency and synchronization solutions have helped define the world’s standards, delivering precision, reliability and efficiency to wireless and wireline networks, instrumentation and testing applications and network time management. Deployed in more than 90 countries, instrumentation products include atomic clocks, cesium and rubidium standards, VME, VXI, crystal oscillators, Bus Timing, PCI cards and Global Positioning System (GPS) solutions for instrumentation applications, alphanumeric displays, as well as network time servers for Network Time Protocol (NTP) synchronization and time synchronization solutions. In 2002, Symmetricom acquired TrueTime and Datum, enhancing its position in the world time and frequency markets. Symmetricom is based in San Jose, Calif., with offices worldwide. For more information, visit www.symmetricom.com

Contacts:
Raychel Marcotte
BroadPR
617-645-6022

Jeanne Hopkins
Symmetricom
978-232-1487

Posted by Industrial-Manufacturing at 11:47 PM | Comments (0)

Ohio Flags of Honor Foundation Announces Schedule of Events to Honor Ohioans Killed in Action in Iraq and Afghanistan

The Ohio Flags of Honor Foundation was recently created with the support of Ohio's KIA families. The foundation seeks to honor Ohioans who gave the last full measure of duty and devotion to community and country while also assisting the state's veterans community.

Columbus, OH (PRWEB) November 8, 2005 -- Ohio Flags of Honor Foundation Chairman Andrew B. Leavitt announced the schedule of events for the foundation’s upcoming remembrance of Ohioans killed in action (KIA) in Iraq and Afghanistan on Wednesday, November 9 through Friday, November 11, 2005.

The foundation will host a private event with Ohio KIA families at the Ohio Statehouse in Columbus from 5:30 p.m. until 7:30 p.m. on Wednesday, November 9, 2005. This historic event will take place in the Ohio Statehouse atrium and will include a special presentation in honor of Ohio KIAs at 6:30 p.m.

“It is fitting that the foundation’s launch and remembrance of Ohioans who gave the last full measure of duty and devotion to community and country in Iraq and Afghanistan coincides with tributes to our recently returned military units and our state’s veterans,” said Foundation Chairman Leavitt. “Millions of Ohioans have served with honor and distinction in our nation’s military and many have given their lives on foreign shores to protect our freedoms, liberties and way of life here at home. The Ohio Flags of Honor Foundation exists to ensure that, like ‘Old Glory’ itself, the memory and understanding of the service and sacrifice of these brave men and women endures in perpetuity and for all posterity.”

Leavitt continued, “as citizens of this great state and nation, we each owe a tremendous debt to all of our soldiers, sailors, airmen, marines and coast guardsmen, especially our fallen and their families. We are, therefore, duty-bound to honor and assist these patriotic and selfless citizens as much as possible. The Ohio Flags of Honor Foundation is committed to this charge.”

Also on Wednesday, November 9, Marines attached to the recently returned Lima Company, 3rd Battalion, 25th Marine Regiment along with Ohio KIA families, veterans and volunteers will post 354 dedication flags at Columbus City Hall, 90 West Broad Street, Columbus, Ohio 43215. This undertaking, which will begin at 8:00 a.m., will include the posting of 103 Ohio Flags of Honor in remembrance of those Ohioans who have died in military service in Iraq and Afghanistan. Beginning at 4:00 p.m. that afternoon, members of Lima Company wearing full combat gear will serve as sentries at the entrance of the display and will stand the post around the clock until midnight on Friday, November 11, 2005. After a private remembrance of and tribute to their loved ones by KIA families, the Ohio Flags of Honor memorial will be open to the public beginning at 5:00 p.m. on Wednesday, November 9. The LeVeque Tower—a skyscraper in downtown Columbus—will be lighted in red, white and blue in honor of Ohio’s KIAs on the evenings of November 9 through November 11.

On Thursday, November 10, the Ohio Flags of Honor Foundation will host a public dedication at Columbus City Hall at 10:30 a.m. and announce the launch of a statewide tour beginning on January 1, 2006 with the support of the American Legion Department of Ohio and other veteran organizations, businesses and individuals throughout Ohio.

Posted by Industrial-Manufacturing at 11:46 PM | Comments (0)

Celebrate End of Hurricane Season – Support Continuing Relief Work with a Donation to Charity “Angels”

To celebrate the end of the hurricane season, all Americans should demonstrate thanks by supporting relief agencies such as Mercy Medical Airlift, says Chatlos Foundation President William J. Chatlos.

Longwood, FL (PRWEB via PR Web Direct) November 8, 2005 -- The end of hurricane season spells relief for many Americans, but relief work doesn’t end on Nov. 30, the season’s official last day.

Americans can celebrate the end of this year’s devastating season by making a donation to the relief organization of their choice, says William J. Chatlos, president of The Chatlos Foundation.

To kick off this celebration, The Chatlos Foundation has contributed to several charities working with Hurricane Katrina victims, including Mercy Medical Airlift (MMA). Since the early 1970’s, MMA’s volunteer pilots have flown over 25,000 missions, transporting financially vulnerable people at no cost to get the medical treatment they need. Pilots donate their time and often their aircraft and the fuel. Chatlos observes that “people don’t volunteer unless they feel the organization they are supporting is accomplishing something important.”

Hurricane Katrina dramatically stepped up the pace for MMA. Edward R. Boyer, CEO and president of MMA, knows that “the stories and numbers will continue to grow. We expect to fly 6,000 missions in Katrina relief over and above our normal patient transport activities.”

Boyer is also chairman of the board of Angel Flight America, a network of unpaid “Earth Angels” who arrange the free flights and coordinate with pilots. “Using our volunteer pilots around the country (we have 6,200 of them – in all 50 states),” Boyer explains, “our Angel Flight operations have reunited hundreds of families – a huge number where parents were separated from their children.”

Since the hurricanes, Mercy Medical Airlift is managing the use of donated corporate jets with flight crews to transport relief workers, government employees, and disaster specialists, and to reunite evacuee families. Donated funds are urgently needed to cover expenses of coordinating these flights and responding to public needs. There is no charge to the public for MMA-provided transportation.

Chatlos admires the people of MMA. “What a blessing it is to know we Americans are still a people that know how to take care of one another.”

On December 1, celebrate twice. Give thanks first that the hurricane season has officially ended. Then give thanks – and a check – to an organization that continues to help so many others still in need.

To learn more about Mercy Medical Airlift and make a donation, visit http://www.mercymedical.org/.

About The Chatlos Foundation:
The Chatlos Foundation funds nonprofit organizations based in the USA. Support is provided to organizations currently exempt by the Internal Revenue Service of the United States. The Foundation's areas of interest are: Bible Colleges/Seminaries, Religious Causes, Medical Concerns, Liberal Arts, and Social Concerns.

Contact:
CJ Leff
The Chatlos Foundation
407-862-5077
http://www.chatlos.org

Posted by Industrial-Manufacturing at 12:07 AM | Comments (0)

November 07, 2005

How i-Sight Case Management Software Helps DataPath to Improve Support for its Combat-Ready Satellite Earth Stations

Carpenter investigated several potential solutions before choosing i-Sight Case Management Software from Customer Expressions, the leader in customizable, Web-based case management and complaint-handling solutions. “I was impressed by the flexibility of the solution,” Carpenter says. “It was immediately obvious to me that the i-Sight software would enable us to accomplish what we wanted to do, quickly and cost-effectively.”

(PRWEB) November 7, 2005 -- Datapath Inc. has selected the i-Sight Case Management Software by Customer Expressions.

At DataPath, Inc., words like “rugged,” “reliable” and “industrial strength” are not just empty marketing promises. The Duluth, GA-based systems integrator builds fixed, transportable, mobile and portable satellite earth terminals for use in some of the world’s most challenging and hostile environments – areas where less sophisticated equipment simply will not cut it.

Widely deployed by the U.S. military, DataPath’s battle-tested satellite earth terminals have seen action in Iraq, Afghanistan and the Balkans, delivering secure, headquarters-quality voice, video and Internet communications. The company’s commercial solutions, meanwhile, support television broadcasters and other major customers across the United States and around the world.

One of the keys to DataPath’s success is its reputation for expert on-site operations and maintenance support. Wherever its solutions are installed, the chances are good that DataPath engineers and technicians are there, too, delivering round-the-clock, mission-critical connectivity.

Founded in 1996, DataPath has grown rapidly over the past decade, to the point where it now employs more than 300 personnel globally.

The Challenge

In the field, DataPath’s systems are typically configured with full redundancy. In the rare event that a problem necessitates the shutdown of a primary satellite earth terminal, the company can switch seamlessly to a secondary unit that is kept on hot standby. For customers, the result is reliable, uninterrupted communication.

To enhance its reputation for superb customer service quality, DataPath needed an efficient means of tracking and managing technical problems and other support issues. Prior to 2004, the company’s field technicians would generally report problems to head office by email. “Our field personnel would tell us what was wrong, and then I would make a note of it in a Word document,” recalls Steve Carpenter, DataPath’s Manager of Customer Service. “It was a pretty painstaking process. At any one time, we might be juggling multiple issues; and I had nothing more than individual paper documents to track them all.”

The Solution

Convinced that there was a better way, Carpenter set out to find a full-featured case management system that was secure, easy to use and cost-effective. He wanted a system that could be customized quickly to DataPath’s unique requirements and that would be accessible to all personnel via the Internet, regardless of location or time zone. That way, employees in the field would be able to log in securely at any point and see the status of their support tickets. If a technician at head office was working on a solution, the system would ensure that all appropriate personnel were kept fully informed. If a replacement part was required, the system would tell staff in the field whether the part was in stock or on order, and how quickly it would be shipped out.

Carpenter investigated several potential solutions before choosing i-Sight Case Management Software from Customer Expressions, the leader in customizable, web-based case management and complaint handling solutions. “I was impressed by the flexibility of the solution,” Carpenter says. “It was immediately obvious to me that the i-Sight software would enable us to accomplish what we wanted to do, quickly and cost-effectively.”

The customized i-Sight solution was fully deployed less than 90 days after DataPath placed its order. The new system not only met Carpenter’s requirements, it included several additional features that were not part of the original design specifications. For example, during the testing phase, Carpenter asked whether the system could be configured to send automatic reminders to field personnel whenever their passports, visas or foreign work permits were nearing expiration. He also wondered whether the system could be set up to generate an automatic email alert whenever a specific piece of testing equipment was due for recalibration. As well, he wanted to know if i-Sight could double as an inventory management system, helping the company to keep track of spare parts that are stored at various field offices.

In every case, the answer was yes. “I was extremely impressed by the way the engineers at Customer Expressions managed to pull everything together,” Carpenter says. “I would say something like, ‘It would be really great if i-Sight could do this,’ and they would just go ahead and make it happen. We definitely threw some challenges at them, and they never let us down.”

i-Sight also features a full range of advanced reporting and analysis tools. As a result, Carpenter can now easily monitor service turnaround times, analyze hardware failures by vendor, and identify trends before they become a serious problem. “Previously, reporting and analysis of our field systems was quite challenging,” Carpenter says. “i-Sight has given us a range of important tools that we did not have before.”

The bottom line? “i-Sight Case Management Software enables us to support our customers and field employees better. It was the right solution for us.”

About Customer Expressions

Based in Ottawa, Canada, Customer Expressions (web-based case management solutions for regulators and enterprises focused on quality assurance and customer service. Customer Expressions has gained an international reputation for best-in-class software that enables managers to improve customer retention and profitability. The privately held firm provides i-Sight, an integrated solution for complaint handling, corrective and preventive action management (CAPA Management), compliance monitoring and other business processes that require case management.

Posted by Industrial-Manufacturing at 12:26 AM | Comments (0)

RAS (Remote Astronomical Society) Observatory Announces First Web-based Seminar on Astronomy that is Available to the Entire World Population

As a follow-up to the announcement made on October 19, 2005 the RAS Observatory, in conjunction with Ivocalize.com a web conferencing hosting service, is initiating this new exciting program that provides interested participants located anywhere in the world, with appropriate internet access, an opportunity to explore some of the various aspects of amateur astronomy; in this case, Backyard Spectroscopy.

Fountain Valley, CA (PRWEB) November 7, 2005 -- The RAS (Remote Astronomical Society) Observatory, announced, to their knowledge, the first ever web-based seminar that will be available to the world-wide general public.

The seminar on “Backyard Spectroscopy”, presented by Dale Mais, Ph. D. (http://www.mais-ccd-spectroscopy.com/Personal.htm) is being offered as a public service of the RAS Observatory. There is no charge for access to this seminar.

Here are the main points:
• Who: Presented by Dale Mais, Ph.D. of the SAS (Society for Astronomical Science) http://socastrosci.org/
• What: Web-based seminar on backyard spectroscopy for the amateur astronomer
• Where: On your most convenient web connected computer via the internet
• When: Sunday, November 13, 2005 12:00 PM MST. Approximately 1 hour
• What: Here is an example of what can be accomplished in a typical amateur’s backyard environment

All further information will be distributed only to those that sign up for this group. Questions should be directed to: e-mail protected from spam bots.

An added attraction to the 5 sophisticated Takahashi telescope systems mounted on Paramount robotic mounts is their access to the pristine dark skies of New Mexico, USA.

RAS Observatory listed some of the additional benefits available to members:

• A support system for amateur astronomers to participate in scientific research
• Educational resources
• Assistance in developing meaningful projects
• Assistance in presenting findings and document research results
• Submission of papers
• Coordination of research projects
• Subsidizing research projects
• A platform to permit researchers to present work
• Recognition to researchers for achievements
• Coordinate amateur projects with professional projects
• Coordinate collaborative projects
• Completive projects to help develop skills
• Participate in web-based technical seminars

Posted by Industrial-Manufacturing at 12:26 AM | Comments (0)

SportairUSA Announces StingSport New Standard Features

SportairUSA LC, North American distributors of Light Sport Aircraft (LSA), today announced integration of the Garmin GPSMAP 396 into the StingSport. The GPSMAP 396, in addition to an innovative carb heating design, headline 24 new standard features.

Tampa, FL (PRWEB) November 7, 2005 -- SportairUSA LC, North American distributors of Light Sport Aircraft (LSA), today announced another first in the LSA category – integration of the Garmin GPSMAP 396 into the StingSport panel as a standard feature. While delivering unparalleled situational awareness through XM WX Satellite Weather™ products, the GPSMAP 396 also offers 130+ channels of entertainment via XM Satellite Radio. The same distributor to pioneer introduction of a standard Ballistic Recovery Parachute System for LSA, SportairUSA also revealed as standard an innovative full time carburetor heating system on the StingSport providing enhanced safety without the traditional power degradation associated with earlier designs. Solidifying the StingSport’s dominance as the premier performance, best-equipped and safety conscious value in Light Sport Aircraft, the release contains 22 other new standard features. LSA enthusiasts are invited to experience first hand the SLSA certified StingSport’s feature release at the AOPA Expo 2005 in the LSA Corral at Peter O. Knight Airport November 3 – 5 or visit http://sportair-usa.com/stingprices.htm.

About Us: SportairUSA distributes exceptional international light sport aircraft via an unparalleled regional sales and service dealer network throughout North America.

Contact Info: Rick Snelling
Marketing Director
SportairUSA
1.678.427.1531

Posted by Industrial-Manufacturing at 12:00 AM | Comments (0)

November 06, 2005

Bill Hayden of Honeywell Aerospace joins SEA Board of Directors

Honeywell Aerospace is now represented on the Supplier Excellence Alliance Board of Directors.

Irvine, Calif. (PRWEB) November 6, 2005 -- Supplier Excellence Alliance (SEA) Board Chairman, Michael Beason, announced that Bill Hayden, Director of Supplier Performance for Honeywell Aerospace, has joined the expanding SEA Board of Directors.

Honeywell is a leading global provider of integrated avionics, engines, systems and service solutions for aircraft manufacturers.

SEA is the Joint Program Office for the conversion of the aerospace, defense and space industry supply chain. SEA is a non-profit alliance of leading industry prime contractors, and suppliers whose purpose is to accelerate supply chain performance.

To learn more about SEA visit the SEA website at www.seaonline.org.

Posted by Industrial-Manufacturing at 11:20 PM | Comments (0)

SatelliteWebDirectory now orbits the Internet - New Satellite Web Directory Site Launches, Making it Easy to Find Information and News on Satellites

SatelliteWebDirectory.com launches its web site providing news and resources from around the world for any and all satellites for the internet public.

(PRWEB) November 6, 2005 -- Recently SatelliteWebDirectory launched its new website, http://www.SatelliteWebDirectory.com, featuring services for finding numerous resources and news relevant to satellites and satellite services via the internet.

http://www.SatelliteWebDirectory.com is the premier resource site for all your satellite needs. It includes worldwide news and information on satellite services, and the satellite industry.

A few decades ago, satellites were viewed as exotic, top-secret military devices. They were used primarily for activities such as navigation and espionage. Now they are an essential part of our daily lives, even if we are unaware of it. Contrary to a popular misconception the speed of these transmissions provide services just as fast as land based broadcasts.

All sorts of daily products can be delivered via satellite. The most common satellite service is television broadcast with radio broadcast slowly gaining popularity. Many gadgets are also using satellite service such as GPS and cellular phones. Satellites improve the accuracy of weather reports.

http://www.SatelliteWebDirectory.com offers many news articles and resources for all kinds of satellite services.

http://www.SatelliteWebDirectory.com goal is to offer fast and easy access to all kinds of satellite services and related products on the internet.

About SatelliteWebDirectory: SatelliteWebDirectory promotes fast and easy references and resources for all types of satellite services. SatelliteWebDirectory can be contacted through its website at http://www.SatelliteWebDirectory.com

Posted by Industrial-Manufacturing at 11:20 PM | Comments (0)

SportairUSA Announces StingSport New Standard Features

SportairUSA LC, North American distributors of Light Sport Aircraft (LSA), today announced another first in the LSA category – integration of the Garmin GPSMAP 396 into the StingSport panel as a standard feature. The GPSMAP 396 as well as an innovative full time carburetor heating system headline 24 new standard features added to the StingSport light sport aircraft.

Tampa, FL (PRWEB) November 5, 2005 -- SportairUSA LC, North American distributors of Light Sport Aircraft (LSA), today announced another first in the LSA category – integration of the Garmin GPSMAP 396 into the StingSport panel as a standard feature.

While delivering unparalleled situational awareness through XM WX Satellite Weather™ products, the GPSMAP 396 also offers 130+ channels of entertainment via XM Satellite Radio. The same distributor to pioneer introduction of a standard Ballistic Recovery Parachute System for LSA, SportairUSA also revealed as standard an innovative full time carburetor heating system on the StingSport providing enhanced safety without the traditional power degradation associated with earlier designs. Solidifying the StingSport’s dominance as the premier performance, best-equipped and safety conscious value in Light Sport Aircraft, the release contains 22 other new standard features. LSA enthusiasts are invited to experience first hand the SLSA certified StingSport’s feature release at the AOPA Expo 2005 in the LSA Corral at Peter O. Knight Airport November 3 – 5 or visit http://sportair-usa.com/stingprices.htm.

SportairUSA distributes exceptional international light sport aircraft via an unparalleled regional sales and service dealer network throughout North America.

Posted by Industrial-Manufacturing at 11:19 PM | Comments (0)

IBG Discusses Comparative Biometric Testing on Thursday, November 10, 2005, at 1 PM EST

This teleconference introduces the newest round of IBG’s biometric system performance testing effort.

(PRWEB) November 4, 2005 -- International Biometric Group (IBG) extends an invitation to participate in its teleconference on Comparative Biometric Testing Round 6.

Event Start Time: Thursday, November 10, 2005, at 1 PM EST (10 AM PST; 1800 Coordinated Universal Time). There is no fee to participate in the teleconference.

Since 1998, IBG’s Comparative Biometric Testing (CBT) has evaluated the accuracy and usability of biometric systems in controlled test environments. Each CBT Round evaluates 10-12 systems from leading fingerprint, face recognition, iris recognition, voice recognition, and emerging biometrics vendors. Results are used by government and commercial organizations to select appropriate vendors and technologies for applications such as border management, enterprise security, and ID systems.

CBT Round 6, commencing in early 2006, represents the next generation of IBG’s long-running test effort. The CBT methodology has been enhanced and expanded to generate substantially more independent performance data relevant to biometric vendors, technology partners, and deployers.

In the November 10 teleconference, IBG Consultant Victor Lee will address the following:

- Opportunities for participation in CBT Round 6
- Unique aspects of CBT relative to other test efforts
- Range of performance data generated through CBT Round 6
- How government and commercial organizations can put CBT results to use
- How the CBT methodology has been enhanced to meet industry needs

Visit www.biometricgroup.com/webcon to log in and obtain further details.

About International Biometric Group
Founded in 1996, International Biometric Group, LLC is the biometric industry’s leading independent research, consulting and integration firm. IBG has extensive hands-on experience with every biometric technology, including fingerprint, face, hand, iris, voice, and signature. Working on behalf of private and government clients, IBG evaluates, designs, and integrates biometric solutions for Internet applications, public sector programs, network security, point of sale applications, and physical access systems. Learn more at http://www.biometricgroup.com.

Posted by Industrial-Manufacturing at 11:18 PM | Comments (0)

November 04, 2005

Veterans Day Countdown with VetFriends.com In Honor of our Veterans

Veterans Day -- History of and present day veterans worldwide on VetFriends.com.

Charleston, SC (PRWEB) November 4, 2005 -- In remembrance of the sacrifices and acts of courage that many men and women made during WWI, Armistice Day was declared a federal holiday on Nov. 11, 1938. Soldiers marched in hometown parades, politicians and veteran officers gave speeches and held ceremonies all in celebration of the peace they had won. Years later in 1954, Nov. 11th was officially changed to Veterans Day, representing our nation’s thanks, loyalty and respect to our veteran soldiers. This Veterans Day, we ask all Americans to take a moment and reflect on the bravery of the many men and women who have served our country in times of need.

Carrying this national spirit and tradition of supporting veterans, VetFriends.com has created an easy-to-use online website for veterans, active military, along with friends and family, offering a wealth of information and a variety of helpful services. VetFriends.com currently has a member count of 580,000+ people, attracting over 150,000 visitors per month to its website…and the number is rapidly growing!

Top priority: reuniting veterans, family and friends. Visitors can search the database to make contact with old friends and to find information on how to obtain their own or their parent’s military records and medals, which they earned and may have lost. Moreover, users can chat online with other veterans, post photos and share military jokes, search and set up reunions, along with a variety of other great features and services.

The unique Veterans Business Directory at VetFriends.com/biz allows users to further support veterans by doing business with veteran owned companies and professionals. Visitors can browse through state, city and specific category, ranging from carpenters to realtors to information technology and lawyers.

With Veterans Day only weeks away, VetFriends.com has initiated a “Countdown to Veterans Day” campaign, to further promote and support our veterans. An online forum has been created at www.vetfriends.com/veteransday, reaching out to veterans and anyone else interested in contributing their thoughts and insights in regard to our military personnel and Veterans Day. These submissions will be posted online in a Veterans Day collection throughout the months of October and November and will be distributed to the media. Furthermore, Veterans Day nationwide parade/event listings, newsletters and press releases will be posted, faxed and emailed in support of our veterans.

This year, with the approach of Veterans Day, feelings of thankfulness and respect will fill the hearts of the American people, as we all come together and unite to celebrate and show our gratitude to our veterans and active military soldiers alike.

Note to our friends in the media:
“Interview a Veteran” at www.VetFriends.com/interview_veteran.cfm, connects members of the media with veterans who might be interviewed for a news story. If interested in this free service, please contact VetFriends.com founder Dale F. Sutcliffe at 843-856-2863 for further information. Mr. Sutcliffe is also available for interviews or questions.

Posted by Industrial-Manufacturing at 01:51 AM | Comments (0)

Knowledge Management Solutions, Inc. and the National Technical Information Service Create a Joint Venture to Provide e-Learning Solutions

Knowledge Management Solutions, Inc. (KMSI) has entered into a joint venture with the National Technical Information Service (NTIS) to deliver a wide range of end-to-end e-learning and knowledge management solutions. KMSI serves as a solution provider to create innovative solutions that increase the performance and effectiveness of learning and knowledge management systems for Federal Government Agencies.

(PRWEB) November 4, 2005 -- Knowledge Management Solutions, Inc. (KMSI) has entered into a joint venture with the National Technical Information Service (NTIS) to deliver a wide range of end-to-end e-learning and knowledge management solutions. KMSI serves as a solution provider to create innovative solutions that increase the performance and effectiveness of learning and knowledge management systems for Federal Government Agencies.

“KMSI provides the best learning technology platform on the market today. Our technology leadership, coupled with the experience and resources of NTIS will provide Government Agencies with a best in class solution.” said Jack E. Lee, CEO of Knowledge Management Solutions, Inc.

About Knowledge Management Solutions, Inc.
Knowledge Management Solutions, Inc. is a leading provider of innovative learning and knowledge management solutions for Fortune 2000 companies and Government agencies. For more information, please visit www.kmsi.us

About KMx Enterprise
KMx Enterprise is an Advanced Distributed Learning Platform that provides fully integrated e-learning content development, learning management, performance management, learning content management and virtual classroom technologies in one easy to use solution. KMx enables rapid content creation and delivery by a wide range of content creators including instructional designers and subject matter experts. KMx is accessible using standard desktop applications and browser technologies and supports popular learning, content and document management technologies. KMx is available as both an installed application and as an ASP hosted service

About The National Technical Information Service
The National Technical Information Service (NTIS) (www.ntis.gov) is a bureau within the Department of Commerce that offers a wide range of professional services to Government Agencies. The Agency Consortium for Secure E-Learning (ACSEL) at NTIS works with Government Agencies that require a total solution, providing a higher level of security and certification for their learners. In 2004, NTIS through OPM’s e-Training Initiative supporting the President’s Management Agenda became an approved Service Provider offering e-Learning solutions. In addition, NTIS serves our nation as the largest central resource for Government-funded scientific, technical, engineering, and business related information available today. NTIS is celebrating 60 years of information sharing to agencies, businesses, universities, and the public

Contact Information and Press Inquiries:

Mr. Brett Wilson
Vice President, Operations (KMSI)
(410) 859-0104

Mr. Steve Case
Vice President, Sales (KMSI)
(603) 382-2262

Mr. Ken Echevarria
Joint Venture Advocate
(917) 975-4874

Posted by Industrial-Manufacturing at 01:50 AM | Comments (0)

Trade In Your Old Tungsten Grinder For A New DGP Grinder

Diamond Ground Products, “The Tungsten Electrode Experts” has been the industry leader in tungsten preparation and tungsten electrode grinding since 1990. Now, for a limited time, we will allow you to trade-in your current tungsten grinder from any of our competition toward the purchase of any DGP Model Tungsten grinder.

FOR IMMEDIATE RELEASE

Newbury Park, CA (PRWEB) November 4, 2005 -- Diamond Ground Products, “The Tungsten Electrode Experts” has been the industry leader in tungsten preparation and tungsten electrode grinding since 1990. Now, for a limited time, we will allow you to trade-in your current tungsten grinder from any of our competition toward the purchase of any DGP Model Tungsten grinder.

Here’s your chance to purchase the grinder you probably wish you had purchased in the first place. Whether a member of our Piranha series of grinders, or our industrial quality DGP models, we will take your trade-in toward the purchase of the most reliable and capable tungsten grinders on the market.

Contact DGP today at 805-498-3837 for a quote on your trade-in!

Diamond Ground Products is dedicated to the improvement of weld quality & welder productivity, and maintains a reputation as the industry leader in tungsten and tungsten preparation. Our ongoing management philosophy is to provide quality product and receptive service that exceeds even the most stringent expectations. Contact DGP today to see how we can help with your current or future welding applications.

For more information, contact:
Jim Elizarraz
Diamond Ground Products
2550 Azurite Circle Newbury Park, CA 91320
Ph: (805) 498-3837
Fax (805) 498-9347
Website: www.diamondground.com

Posted by Industrial-Manufacturing at 01:49 AM | Comments (0)

Honoring WWII Women on the Home Front and Correcting a 60 Year Old Misconception

As Veterans Day 2005 approaches, we should also remember those who worked on the Home Front in World War II. For over 60 years, women who worked in “men’s jobs” during World War II are called “Rosie the Riveter.” It is time to recognize the many women in the defense trades who were not riveters.

(PRWEB) November 4, 2005 -- “No. We were not Rosie the Riveter. We welded ships. Rosie got all the attention. No one even gave us a name.” – Ann Jurjevic Thomas in “Don’t Call Me Rosie, the Women who Welded the LSTs and the Men who Sailed on Them”

Rosie the Riveter was the U.S. Government’s icon during World War II and posters showing Rosie were produced to encourage women to join the work force. Women went to the airplane factories, the shipyards, the munitions factories, and other defense related industries and performed work that was considered “men’s jobs”.

Although today we try to honor these women by calling them Rosie the Riveter, if you ask a woman welder who worked in a shipyard if she was a Rosie, she might tell you no. She will then explain to you that welding is different than riveting.

The development of arc welding made it possible to build ships faster -- a critical element during World War II. In 1942, shipyards began producing the Landing Ship, Tank or LST. Winston Churchill requested this new type of ship, the LST, be constructed so that the Allies could land directly on the beaches of Africa and Europe and discharge troops and equipment.

Because the U.S. was at war and there was a shortage of men in the shipyards, it was the women that went to the shipyards to build the LSTs. The shipyards that built the majority of LSTs were located in Pittsburgh, Ambridge, Seneca, Evansville, Jeffersonville, and Hingham. As shipyard welders, the women endured the cold of winter and the heat and humidity of summer, the hot steel occasionally dropping beneath their coat and burning their chest, and the chance of a flash burn that may develop into an eye infection. But ask these women about being a welder during World War II and many will tell you that they loved their work.

If the U.S. government had come out with a different icon, for example “Doris the Defense Worker”, these women would have felt more connected to it. As an example, if one called all doctors, “Sam the Surgeon”, this might create a detachment for those who are general practitioners, pediatricians, gynecologists, internists, etc.

Recognizing that Rosie the Riveter does not represent the thousands of women who worked in the other trades during World War II does in no way lessen the importance of those who really were Rosies. All of the women who worked on the Home Front during World War II are very proud of their accomplishments and contribution to the war effort. But if we want to truly remember them, then we need to find an all-encompassing icon.

Kathleen Thomas is author of the book, “Don’t Call Me Rosie, the Women who Welded the LSTs and the Men who Sailed on Them”.

Posted by Industrial-Manufacturing at 01:48 AM | Comments (0)

Hi-Tec Systems Wins ATCA Award; Industry Group Recognizes Aviation Safety/Security Firm

Hi-Tec Systems, Inc., has received the Air Traffic Control Association's 2005 Small and Disadvantaged Business Award.

GRAPEVINE, TX (PRWEB) November 4, 2005 -- Hi-Tec Systems, Inc., has received the Air Traffic Control Association's 2005 Small and Disadvantaged Business Award. The nonprofit organization's Medallion Award recognizes a company "for an exemplary achievement or contribution that has added to the safety, quality or efficiency of air traffic control (ATC)."

The award was presented this week to Hi-Tec President/CEO Tribhuvan Singh at ATCA's 50th Annual Conference, which was held October 30 - November 2 at the Gaylord Texan Resort near Dallas.

"I am both honored and flattered Hi-Tec Systems is selected for this award, and I am humbled by seeing so many colleagues from other successful companies," said Singh. "This recognition brings to the forefront the work that Hi-Tec performs behind the scenes supporting the Federal Aviation Administration's development of ATC systems."

ATCA is a nonprofit, nongovernmental organization formed in 1956 to promote and encourage advancement of the aviation and air traffic control. Its members include ATC professionals, governments, companies, universities, and air navigation service providers from around the world.

The chairman of the ATCA Awards Committee, Tim Halpin, called Medallion Award recipients "the most deserving in the profession" of air traffic control. "This award is confirmation of Hi-Tec's adherence to the mission and values of ATCA," Singh said. "It's also a sign of the respect our employees are winning."

The Small and Disadvantaged Business Award is given annually to an organization owned and controlled by minority individuals. After a 20-year career with Fortune 500 companies, Trib Singh started out on his own from the garage of his Egg Harbor Township, NJ, home in 1995.

Hi-Tec Systems has now grown to 90 employees working around the world in aviation safety and aviation security, and still serves its first contract awarded ten years ago at the FAA William J. Hughes Technical Center near Atlantic City, NJ. Hi-Tec professionals provide engineering, research and information technology services to federal agencies and international aviation authorities and airlines. Hi-Tec also maintains a branch office in Arlington, VA, to serve customers at FAA headquarters and elsewhere in the Washington, DC, area.

Posted by Industrial-Manufacturing at 01:47 AM | Comments (0)

November 03, 2005

Southwest Airlines Launches New NBA-Themed Specialty Airplane; Slam Dunk One Marks First Southwest Specialty Plane with a Partner in 17 Years

Three Ronald McDonald House families on maiden voyage to Los Angeles as part of NBA CARES.

Dallas, TX (PRWEB via PR Web Direct) November 3, 2005 -- Southwest Airlines (NYSE: LUV) unveiled its first new specialty airplane with a marketing partner in 17 years, the NBA-themed Slam Dunk One, it was announced today by Southwest Airlines President Colleen Barrett, NBA Commissioner David Stern, NBA legends Bill Russell, Dominique Wilkins, Clyde Drexler, Bob Lanier, Bill Walton, and George Gervin and WNBA legend Rebecca Lobo. The first and only other customized Southwest plane dedicated to a marketing partner honors Shamu of Sea World fame, and has been in service since 1988. Southwest also has a fleet of six specialty aircraft dedicated to various states and one dedicated to Ronald McDonald House.

The only plane of its kind in all of sports, Slam Dunk One is emblazoned with an NBA basketball going through a basketball hoop on the forward portion of the fuselage. The ball is trailed by an orange wave that starts from the back of the plane making it appear as if it is being shot into the basket. Slam Dunk One is emblazoned on the nose of the plane. The plane has a customized interior with each of the 30 NBA team logos adorning the overhead compartments and a custom windscreen featuring a panel commemorating today the date of the aircraft's maiden flight.

The NBA and Southwest Airlines expanded their marketing partnership in July, and Slam Dunk One is the first product of the broader relationship. The multi-year agreement establishes new community outreach efforts and increases Southwest advertising through NBA media to reach the league's loyal base of trendsetting fans.

Following its trip to Los Angeles, Slam Dunk One will go into regular rotation throughout Southwest's 61-city network. The special plane also will be used in ongoing charitable activities and special events conducted by the NBA and Southwest.

"The rare step of creating a specialty airplane with a partner demonstrates our strong commitment to the NBA partnership," said Barrett. "This partnership provides us with unique opportunities to convey our spirit and pride to our Customers through a subject they feel passionate about ... NBA basketball."

"The NBA and Southwest Airlines share a common passion for community outreach and a willingness to take innovative steps to serve our fans and customers," said Stern. "As a larger than life symbol of our partnership, Slam Dunk One will further our efforts in providing unique fan and customer experiences and a new means of enriching our communities with special outreach programs."

Slam Dunk One, a Boeing 737, will fly a special charter flight as its maiden passenger voyage today from Dallas to Los Angeles carrying three families from the Dallas Ronald McDonald House. Once in Los Angeles, the families will receive a Shoot For Hope experience which includes receiving tickets to an NBA game (Suns @ Lakers), visiting with NBA players and legends, a chance to see warm-ups courtside, and special gifts.

The Shoot For Hope program with Southwest Airlines is part of NBA CARES, a global community outreach initiative that will feature the league, players, and teams raising and contributing more than $100 million for charity, donating more than one million hours of hands-on volunteer service to communities worldwide, and building more than 100 places where kids can learn and play over the next five years.

The following special guests and their families will be riding on Slam Dunk One and will receive a Shoot For Hope experience from the NBA and Southwest Airlines:

Jonathan Rangel (17, San Angelo, TX) -- At 12 years old Jonathan was diagnosed with a benign tumor in his arm that was wrapped by his arteries (Parkes Weber Syndrome), meaning doctors were unable to remove the tumor without risking Jonathan's life. In attempt to maintain the amount of blood feeding the tumor, Jonathan travels to Boston every three months for surgery to block some of the blood vessels feeding the tumor. Jonathan is a positive person who believes he was given this disease because he can handle the situation better than most people. Jonathan is a big NBA fan and his favorite player is Dirk Nowitzki.

Andy Noland (15, Beaumont, TX) -- Due to Spina Bifada, Andy is unable to walk and is in a wheelchair, but he doesn't let that stop him. Andy is currently a freshman in high school, where he is the varsity football team trainer. The Noland family was affected by Hurricane Rita and have recently traveled back home to Beaumont after staying at the Ronald McDonald House for three weeks. Andy loves basketball and his favorite player is Kobe Bryant.

Cody Miller (14, Port Neches, TX) -- Cody was diagnosed with a type of Muscular Dystrophy known as Intermediate Spinal Muscular Atrophy or SMA Type 2 at the age of three. Due to the disease, Cody is in a wheelchair but he doesn't look at himself as disabled. Cody is a high school freshman and enjoys meteorology. Currently the family is staying in Dallas but is originally from Port Neches, where 75 percent of their business and home were damaged by Hurricane Rita. Cody is also an NBA fan and his favorite player is Kobe Bryant.

About Southwest Airlines
Southwest Airlines, the nation's largest carrier in terms of domestic passengers enplaned, currently serves 61 cities in 31 states. Based in Dallas, Southwest currently operates more than 3,000 flights a day and has 31,000+ Employees systemwide.

About the NBA
With 30 teams in the United States and Canada, NBA games and related programming are broadcast to 215 countries in 43 languages. The NBA is a recognized leader in sports marketing, currently maintaining its longest-ever list of fully integrated domestic and global marketing partnerships with the most recognizable brands in the world. NBA players are the most recognizable and successful product endorsers in sports, with dozens of players appearing in national and international promotions each season. For more information on the NBA, visit http://www.NBA.com .

Media Contact:
Matt Bourne of NBA
cell +1-917-612-5401
e-mail protected from spam bots
or Melanie Jones of Southwest Airlines +1-214-792-4413
e-mail protected from spam bots
http://www.southwest.com

Posted by Industrial-Manufacturing at 10:09 PM | Comments (0)

PlantLog Inspection Solution Chosen as Finalist for Plant Engineering Product of the Year 2005

Robust paperless inspection solution for plant and facility management groups selected as a finalist in the 2005 Plant Engineering Product of the Year contest.

Hayward, CA (PRWEB) November 3, 2005 -- Vorpalware, a software development group focused on mobility solutions for business, today announced its new PlantLog paperless inspection software has been selected as a finalist in the 2005 Plant Engineering Product of the Year contest. The contest showcases "quality, innovative products" introduced to the marketplace within the past year.

The PlantLog solution is used to replace traditional paper and hand written inspection systems by using rugged barcode enabled PDA’s that identify equipment and present the operator with a list of readings to take in a clear and concise manner while ensuring readings are taken within normal operational thresholds. Engineers can then view a component’s complete history with just a few mouse clicks, filter the inspections by a given date range, generate graphical charts and reports or export the data as a standard spreadsheet for sharing with external parties or regulatory agencies.

The PlantLog product includes the following capabilities:

· Automatic equipment identification through barcode labels scanned from PDA
· Date, time and operators name are automatically attached to each inspection record
· Optional notes can be entered for each inspection.
· Warnings alert operator when a reading was taken outside of optimal ranges.
· Readings outside of optimal ranges are automatically displayed in red when viewing historical data
· User permissions feature to designate who can edit the inspection dataset, view historical data or perform actual inspections.
· Networked environment to allow multiple users to view inspection data
· Print out historical inspection data or export to Microsoft Excel
· Filter historical data by any given date range
· Create and memorize graphical charts for data analysis
· Quickly find all instances of a given value for an individual reading

Vorpalware provides PlantLog as a complete turn key solution that includes all PDA hardware, barcode labels, software and installation support. No other external dependences are required including database servers and reporting tools, which are integrated in the PlantLog software.

Pricing and Availability
The PlantLog solution is immediately available direct from Vorpalware and is licensed on a ‘per site’ basis. Licenses are $5,695 for commercial users and $4,556 for non profit and government entities, plus the cost of PDA terminals at ~$800 each.
Multi license discounts are available as well as an evaluation package by request.
For additional information visit: http://www.vorpalware.com/plantlog

About Vorpalware
Vorpalware is a privately held software development group established in March of 2001. Its primary focus has been business mobility solutions and consulting services to the mobile/PDA industry. Vorpalware is headquartered in Hayward California (Silicon Valley) and can be reached at +1 (510) 785-6680 or http://www.vorpalware.com

Posted by Industrial-Manufacturing at 10:08 PM | Comments (0)

Veterans Day Only 2 Weeks Away--VetFriends.com Parade/Events Directory

Veterans Day Parades - www.VetFriends.com.

Charleston, SC (PRWEB) November 3, 2005 -- In 1921, an unknown WWI American soldier was buried in Arlington National Cemetery, the nation’s highest place of honor. The memorial service took place at 11 a.m. on Nov. 11th, Armistice Day, representing the anniversary of the end of WWI (Nov. 11, 1918). Armistice Day was declared a federal holiday on Nov. 11, 1938, in remembrance of the many men and women who served during WWI. Years later in 1954, the name was changed to Veterans Day to honor all U.S. veterans. This Veterans Day, VetFriends.com is reaching out and asking Americans to take a moment and reflect on the sacrifices and bravery of all who have served our country in times of need.

VetFriends.com - the premier Website for reuniting veterans - has created a nationwide Veterans Day parade/events directory. This directory will highlight the locations, dates and times of the Holiday’s events. Moreover, coordinators can submit and register their events that may not yet be listed on the site. With these efforts, VetFriends.com hopes to encourage people across the nation to come together and support our veterans.

Founded by Marine Corps veteran of Desert Storm, Dale F. Sutcliffe, VetFriends.com has reached hundreds of thousands of veterans through its online registry with the goal of reuniting Veterans. The idea of the Website occurred during a conversation with his father-in-law, who had served during the Korean War. When asked whether he would attend a hypothetical reunion with his old Army unit, his father-in-law responded, "I'd be on the next plane to Korea to see those guys." Reflecting on the depth of this reply, Sutcliffe realized those special bonds often withstand the test of time precisely because of the unique and often difficult circumstances under which they were formed. Now, those bonds can be reestablished through modern technology.

Commenting on the significance of Veterans Day, a VetFriends.com member writes, “Veterans Day means so much to me and my entire family. We come from a long line of patriotic people and we recognize the sacrifices we all made and the ultimate sacrifices many made with their lives.”

Countdown Veterans Day with VetFriends.com, in support of our U.S. military veterans. Reuniting, honoring and respecting.

Note to our friends in the media: “Interview a Veteran” at VetFriends.com (www.vetfriends.com), connects members of the media to veterans who would like to be interviewed for a news story. If interested in this free service, please contact VetFriends.com founder Dale F. Sutcliffe at 843-856-2863 for further information. Mr. Sutcliffe is also available for interviews or questions.

Posted by Industrial-Manufacturing at 10:07 PM | Comments (0)

Serious Video Game SpaceStationSim Simulaneously Released and Adapted to Create SimCEV for NASA

Vision Videogames has simultaneously released and adapted it's SpaceStationSim video game to become an early version of SimCEV, a systems engineering and integration visualization tool for NASA. Bill Mueller and Greg Beauchesne described the process of development on October 31st at the Serious Games conference in DC.

(PRWEB) November 3, 2005 -- Vision Videogames’ president Bill Mueller and Technical Director Greg Beauchesne spoke on October 31st at the second annual Serious Games Summit in Washington DC. The topic of their lecture was the progression of their SpaceStationSim software from PC game to an initial version of SimCEV, a collaborative systems engineering and integration visualization tool for NASA. Their topic covered the many issues a small company faces collaborating with a huge government agency like NASA. These lessons learned are valuable to other companies attempting a similar business plan. There is currently broad interest in the space industry to apply game technology like 3D visualization and active components to industrial strength systems engineering and life cycle management on space vehicles. The Crew Exploration Vehicle (CEV) is the new space vehicle that NASA will fly to the moon and to Mars.

Simultaneously, Vision Videogames has released SpaceStationSim through the space oriented distributor Learning Technologies, to the science center, school and museum store market. SpaceStationSim conveys the challenges of managing astronauts aboard the International Space Station while simultaneously building and maintaining the ship.

SpaceStationSim is a database-driven, astronaut/space vehicle simulator game capable of being adapted to visualize data from a variety of sources. Currently the software visualizes Vision's SpaceStationSim game-oriented simulation and in the future, will be capable of visualizing NASA’s own simulation data.

While it is unusual for a product to transition from a game to a serious tool, more and more game techniques are being used in industry to model sophisticated environments and equipment ranging from hurricane impact to military hardware and tactics. The second annual Serious Games Summit is where leading academics, training experts, military personnel, government leaders, foundations, and non-governmental organizations gather to discuss future collaboration and determine how game methods and technologies can further outreach, education and training goals. For more info, see http://www.spacestationsim.com/

Posted by Industrial-Manufacturing at 10:06 PM | Comments (0)

Gus McLeod's Solo Pole to Pole Flight Scrubbed Due to Contaminated Fuel Line; Next Attempt at Historic Flight Must Wait Until Spring

The unknown contaminate that was found in "Firefly's" fuel supply has forced the postponement of Gus McLeod's historic Pole to Pole solo flight. All of the fuel tanks and lines must now be "scrubbed and cleaned." The contaminated fuel has been sent for testing.

Gaithersburg, MD (PRWEB) November 3, 2005 -- It was probably one of the most difficult decisions Gus McLeod has ever made… the decision to postpone his historic solo flight from Pole to Pole.

In today’s interview, McLeod said, “There are times when circumstances are beyond your control and the only thing to do is to bow to the inevitable. Certainly the failure of the "Firefly's" nose gear was a bad omen. In and of itself, it was not a show stopper. The contamination I found in the tanks yesterday is another matter. As of now, I do not know what the contaminate is, nor how it got there. But its presence in the fuel system and engine requires that I partially disassemble the aircraft to correct the damage. Although this process is not difficult, it is very time consuming. It will take more time than I have in order to make the North & South Poles this season. Fortunately, the Poles are not going anywhere and they will be there this spring." The contaminated fuel has been sent for testing.

“Let there be no doubt, Gus is still going!” said Steve Rosenberg, McLeod’s publicist. “Gus said, ‘making this decision was like being eviscerated with a dull knife. But there is no other choice in the matter.’ Updates on the contaminate shall be forthcoming. When all is well with the aircraft, Gus will still fly it to the Coast and back for a test flight. “I even hope to try for an altitude record in Firefly this winter,” said McLeod. “The adventure and fun continues, stay with me and ride the ups, the downs, the twists and the turns of an aviation odyssey. It's not always what I want it to be, but I can assure you, it won’t be boring.”

This coming spring, Gus will go for the Pole to Pole prize. It has been an elusive and difficult goal so far. But why do it if it isn’t hard? The team’s eye is still on that prize and Gus is still holding the course.

“There are so many people that make adventures like this possible ... you know who you are and I wish to thank you all,” said McLeod. “I'd like to thank two in particular though ... Steve Rosenberg at SMRosenberg & Associates who edited the blogs and sent out all the press releases, and Bill Shackford at Honda of Bowie, my local sponsor.”

Finally, Gus is once again available to speak to your group about his Y2000 North Pole Adventure, the Amazing Race, or even what he must do to complete this adventure in the Spring. Please contact Steve Rosenberg of SMRosenberg & Associates at 703.354.7833 for appearance information.

Gus’s Y2000 flight to the North Pole was chronicled in both a National Geographic “Explorer” television special and “Solo to the top of the world,” from Smithsonian Books, written by McLeod.
For further updates or to schedule an interview with Gus McLeod, contact Steve Rosenberg at (703) 658.1302 or email e-mail protected from spam bots.

Posted by Industrial-Manufacturing at 10:05 PM | Comments (0)

Kuwait’s Prime Minister Gets Wings

Kuwait (PRWEB) November 3, 2005 -- Jazeera Airways, the airline that brings more freedom to travellers in the Middle East, recently designated the Prime Minister of Kuwait His Highness Sheikh Sabah Al-Ahmad Al-Sabah as the honorary captain of the Jazeera Airways fleet of brand new, all leather seats, Airbus A320.

PM, and now captain, Sabah Al Ahmad Al Sabah received the honorary title during a launch event held by Jazeera Airways at the VVIP terminal at Kuwait airways to mark the beginning of the new airline’s operations. Chairman and CEO Marwan Boodai presented the PM with the wings in front of an audience of Kuwaiti businessmen, foreign diplomats, and industry professionals. Boodai said, “it gives me great honour to present the PM with the captain’s wing, a symbol of Jazeera Airways.

The airline is the first private scheduled airline in the Middle East and the only competitor to the Kuwaiti government owned carrier, which -until now- had a 50 year monopoly of Kuwait aviation sector. (Jazeera is an independent airline and is not affiliated with any other organization that bears the same name).

Posted by Industrial-Manufacturing at 10:05 PM | Comments (0)

November 02, 2005

VIACK Increases Industry Expertise with New Additions to Senior Management Team

VIACK, a leading authority on secure online collaboration and business communications tools, continues to enhance its business development efforts with the addition of Michael Snitman as the vice president of commercial sales, and with the promotion of Cathy Planchard to vice president of marketing and corporate communications. Bringing combined expertise in such industries as technology and government, Snitman and Planchard will support VIACK’s continued growth in its targeted sectors.

Scottsdale, AZ (PRWEB via PR Web Direct) November 2, 2005 -- VIACK (http://.www.viack.com), a leading authority on secure online collaboration and business communications tools, continues to enhance its business development efforts with the addition of Michael Snitman as the vice president of commercial sales, and with the promotion of Cathy Planchard to vice president of marketing and corporate communications. Bringing combined expertise in such industries as technology and government, Snitman and Planchard will support VIACK’s continued growth in its targeted sectors.

“The expansion of our talented management team (http://www.viack.com/company/leadership.asp) will only enhance our abilities to meet our customers’ needs for secure Internet communications and information sharing over the Web,” said Amy Fadida, senior vice president of corporate business development at VIACK Corporation. “With extensive knowledge of the technology market, combined with proven success in sales and marketing, these two professionals will help us further our sales and marketing efforts and round out our corporate business development team.”

With a career that spans more than 20 years, Snitman brings stellar leadership and technical experience in consulting, information technology and managed services in both the business and government sectors. At VIACK, Snitman will be responsible for the growth and retention of commercial clients, a role for which he is highly qualified, says Fadida. Throughout his career, Snitman has focused on the rapid growth phase of a company’s development in numerous government, commercial and business industries, including manufacturing, telecommunications, retail and transportation.

Before joining VIACK (http://www.viack.com), Snitman worked at Perot Systems Corporation, where his team helped build the company’s government services business unit. Under his sales leadership, the business grew to more than $270 million in annual revenue from organic and acquisition growth.

Snitman was previously an Army officer, where he held leadership positions in missile, and command & control units. He recently completed the Stanford Business School’s “Executive Program for Growing Companies.” He also holds an MBA from Southern Methodist University in Dallas as well as a bachelor’s degree in computer science from the University of South Alabama.

Planchard, a longstanding VIACK employee, is extending her marketing and management role within the company and is responsible for all aspects of marketing and corporate communications. In Planchard’s new position, she will oversee all outbound marketing and communications vehicles for VIACK, including corporate communications, public relations, lead generation, website, promotions and events.

Prior to her work with VIACK, Planchard was a marketing manager for Motorola Computer Group, where she directed marketing communications efforts for the company’s telecom offerings. At Motorola, Planchard led one of the group’s most successful product launches to date, which yielded three industry recognition awards and significant national and international press coverage.

Preceding her transition to the technology industry, Planchard was a senior level communications and brand manager for the parent companies of Hilton Gaming Corporation, Doubletree Hotels and Promus Hotel Corporation. Planchard holds an MBA from the University of Nevada, Las Vegas, and a dual bachelor’s degree in marketing and communications.

About VIACK
VIACK Corporation (http://www.viack.com) is the leading authority on secure Web collaboration and communications over the Internet. Unlike communication services with limited capabilities, the company's VIA3 Assured Collaboration Service (http://www.viack.com/product/tour.asp) provides organizations with an integrated combination of business communication tools including instant messaging, video, audio and information sharing all in one convenient desktop offering. VIA3 was built from the ground up to establish the highest standard of security, enabling companies to conduct meetings and communications over the Internet without risking theft or interception of sensitive information. Employees, colleagues, partners and vendors can now conduct online meetings and information sharing as if they were in the same office. VIACK's service has been embraced by leading enterprises, high-tech companies, professional service organizations and the U.S. government (http://www.viack.com/government/). The company's products and services are available from VIACK, authorized service providers and government contracting vehicles. For more information, go to http://www.viack.com.

Contact:
Cathy Planchard
VIACK Corporation
(480) 735-5925
e-mail protected from spam bots

Leah Hardesty
Off Madison Ave
(480) 505-4528
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 10:51 PM | Comments (0)

Mecmesin Introduces New Quality Testing Machines Designed Especially for Use on Production Floor

A new range of console-controlled compressive and tensile testing machines has been developed by Mecmesin - the specialist in designing and manufacturing force measurement equipment for quality control testing.

(PRWEB) November 2, 2005 -- Mecmesin has introduced a new range of compact systems for quality control testing in manufacturing. MultiTest-x test frames assess quality of manufactured products, components and materials by measuring the ability of samples to sustain applied loads - in tension or compression.

The MultiTest-x has been designed especially for operation in production areas. It is a stand-alone system with an integral LCD control console making it ideal for use in environments which would not be suitable for PC-controlled systems. The system is lightweight yet rugged with a particularly small ‘footprint’.

Up to five test procedures can be created and stored with associated calculations and pass/fail criteria. Once programs have been developed they can be password-protected. Subsequent shop floor operation could then hardly be simpler – a matter of loading a sample, pressing the [Start] button and waiting for test results to be displayed.

When more sophisticated analyses are required, the software supports RS232 communication with external devices, e.g. PCs or dataloggers, enabling test procedures and results to be downloaded, archived and processed.

The system allows cyclic testing and features real-time compensation for deflection of the test frame, fixtures and loadcell – making it particularly suitable for spring testing and simple materials testing applications.

Single-column MultiTest-x systems are currently available with capacities of 1kN, 2.5kN and 5kN, but twin-column machines with substantially greater load capacities are planned for the future.

Posted by Industrial-Manufacturing at 10:50 PM | Comments (0)

Lean Six Sigma Consulting Firm Enters The Small Business Administration’s Business Development Program

The US Small Business Administration (SBA) certifies Bellwether Logistics Services, a Lean Six Sigma and Global Supply Chain Consultancy Firm with high growth potential, as a particpatant, in the 8 (A) Business Development Program.

(PRWEB) November 2, 2005 -- The Small Business Administration's 8(A) Program was created in 1974 to help minority and other disadvantaged businesses to grow through a program of federal contracting preferences and set-asides. Through the program, eligible firms can be awarded federal government contracts on a sole-source or non-competitive basis. Contracts up to $5m for manufacturing and up to $3m for most other categories are available a non-competitive basis.

Bellwether, headquartered in Stockbridge, GA, with large & small business affiliates throughout Georgia, Alabama, Colorado, Illinois, Kansas, Kentucky, Maryland, Missouri, Tennessee, Virginia, is dedicated to providing effective lean six sigma and global supply chain solutions to Aerospace, Automotive Suppliers, Beverage, Call Centers, Chemical, Consumer Products, Department of Defense, Department of Homeland Security, Exporters, Food, Importers, Telecommunications, Transportation and Warehousing companies.

Bellwether Logistics Services was founded as Consult Quality, LLC in 2001. Bellwether expanded its service offerings to include lean six sigma and global supply chain consulting in October 2004. Bellwether Logistics Services, a Minority Business Enterprise (MBE), Small Disadvantaged Business (SDB), Service Disabled Veteran Owned Enterprise (SDVOB), and 8(A) enterprise is an international consulting firm which specializes in applying the six sigma methodology in challenging public and private sectors. Interested parties may view more bellwether logistics services details at the website, www.bellwether-services.com.

Posted by Industrial-Manufacturing at 10:49 PM | Comments (0)

Marotta Selected to Build Motor Controller for the F-35 Joint Strike Fighter

Innovative solutions group, Marotta Controls, has been selected by Eaton Aerospace to design, develop, qualify and manufacture the Ground Maintenance Motor Pump (GMMP) Controller for the Lockheed Martin F-35 Joint Strike Fighter. Marotta’s controller will be used in each of the three variants of the Joint Strike Fighter.

Montville, NJ (PRWEB) November 2, 2005 -- Innovative solutions group, Marotta Controls, has been selected by Eaton Aerospace to design, develop, qualify and manufacture the Ground Maintenance Motor Pump (GMMP) Controller for the Lockheed Martin F-35 Joint Strike Fighter. Marotta’s controller will be used in each of the three variants of the Joint Strike Fighter.

The GMMP provides hydraulic power on the ground to actuate doors during maintenance mode. It also operates in emergency mode, providing backup hydraulics in the event of an engine failure. Marotta’s GMMP Controller uses motor speed and current feedback to precisely control pump speed under varying load and power conditions, monitors temperature and system health and has the ability to shut down the motor in the event of over-temperature or failure. The motor is a 270 VDC, 6.3 kW, brushless motor that uses Hall sensors to provide motor rotational feedback to the controller.

“We have been working closely with Eaton and are delighted to be formally selected for this exciting program,” said Michael Leahan, Vice President and Chief Sales Officer of Marotta. “This contract complements several other projects that Marotta has been awarded for motor controllers on the Joint Strike Fighter and other military aircraft. This award represents a major milestone in the development of our controller technology and the continued expansion of our product line for both sensored and sensorless motor controllers.”

About Marotta Controls
Marotta Controls, Inc., a worldwide leader in control solutions, has over 200 patents and more than 60 years’ experience in providing customers with a wide range of fluid control systems for the most demanding applications in the marine, space, aerospace and pneumatic weapons markets. Marotta has subsidiaries in Cheltenham, UK, and Dublin, Ireland. For more information visit Marotta's website at www.marotta.com.

Posted by Industrial-Manufacturing at 10:48 PM | Comments (0)

Infospectrum, Inc. Named in Top 400 of America’s Fastest Growing Technology Companies in Deloitte’s Technology Fast 500 Program

Deloitte and Touche has awarded Infospectrum, Inc. as one of the 500 fastest growing technology companies in America and one of the 50 fastest growing technology companies in the Los Angeles Area. Infospectrum, Inc contributes its high growth and success to its people, from employees to clients.

Agora Hills, CA (PRWEB) November 2, 2005 -- Infospectrum, Inc. is pleased to announce that the company has been named to Deloitte's prestigious Technology Fast 500 Program for America and Fast 50 Program for Los Angeles, a ranking of the fastest growing technology companies in America by Deloitte & Touche LLP, one of the nation's leading professional services firms. Rankings are based on the percentage revenue growth over a five year period from 2000-2004.

Infospectrum’s CEO, Suresh Radhakrishnan, credits Infospectrum’s highly skilled employees, strong commitment to customer service, and advanced technical skills with the company’s 300+ percent revenue growth from 2000-2004. He said, “It is the people who have helped Infospectrum grow as rapidly as it has. This includes both our employees, as well as our clients. We collaborate as a team, as one entity, to ensure that we are constantly meeting the needs of our clients, while also remaining on the cutting edge of technology. We focus on meeting the demands of today while also focusing on research and development to help provide efficient solutions to problems of the future.”

“Deloitte’s Los Angeles Technology 500 companies have shown the strength, vision and temerity to succeed in today’s very competitive technology environment,” said Tim Lovoy, partner, Technology, Media & Telecommunications, Deloitte & Touche LLP. “We applaud the successes of Infospectrum, Inc and acknowledge their place as one of the very few to accomplish such a fast growth rate over the past five years.” Infospectrum’s increase in revenue of over 300 percent from 2000-2004 resulted in a top 15 ranking in the Technology Fast 50 for Los Angeles and top 400 raking in the Technology Fast 500 in America.

To qualify for the Technology Fast 500, companies must have had operating revenues of at least $50,000 in 2000 and $1,000,000 in 2004, must be public or private companies headquartered in North America, and be a “technology company,” defined as a company that owns proprietary technology that contributes to a significant portion of the company’s operating revenues; or devotes a significant proportion of revenues to the research and development of technology. Using the other companies’ technology in a unique way does not qualify.

For more information on Deloitte’s Technology Fast 50 or Technology Fast 500 programs, visit www.fast500.com.

ABOUT INFOSPECTRUM
Infospectrum is an international systems integration and product development company with extensive Aerospace & Defense domain expertise. Infospectrum integrates large ERP Systems (e.g., SAP, Oracle, Manugistics) with legacy applications using 3rd party middleware, services, and products (i.e., API adaptors specific to the ERP system), and also specializes in mobile applications.

Infospectrum’s U.S. and India offices, encompassing 160 employees, service an U.S., European, and Asian client market, many in the capacity of applications development, maintenance, and support (PDSC) turnkey projects in an ISO 9001:2000 disciplined facility. For additional information on Infospectrum’s right-shore, integrated approach visit the company website at www.info-spectrum.com or call 818-874-9226.

ABOUT DELOITTE

Deloitte refers to one or more of Deloitte Touche Tohmatsu, a Swiss Verein, its member firms and their respective subsidiaries and affiliates. As a Swiss Verein (association), neither Deloitte Touche Tohmatsu nor any of its member firms ahs any liability for each other’s acts or omissions. Each of the member firms is a separate and independent legal entity operating under the names “Deloitte”, “Deloitte & Touche”, “Deloitte Touche Tohmastu” or other related names. Services are provided by the member firms or their subsidiaries or affiliates and not by the Deloitte Touche Tohmatsu Verein.

Deloitte & Touche USA LLP is the US member firm of Deloitte Touche Tohmatsu. In the US, services are provided by the subsidiaries of Deloitte & Touche USA LLP (Deloitte & Touche LLP, Deloitte Consulting LLP, Deloitte Financial Advisory Services LLP, Deloitte Tax LLP and their subsidiaries), and not by Deloitte & Touche USA LLP.

Posted by Industrial-Manufacturing at 10:47 PM | Comments (0)

National Defense Industrial Association and the Defense Talent Network Enter Into Partnership

DefenseJobs.com, the Internet Job board of the National Defense Industrial Association (NDIA) has joined the Defense Talent Network (DTN), the Nation’s Largest Defense Technology, Aerospace and Homeland Security Job Board Network.

(PRWEB) November 2, 2005 -- DefenseJobs.com, the Internet Job board of the National Defense Industrial Association (NDIA) has joined the Defense Talent Network (DTN), the Nation’s Largest Defense Technology, Aerospace and Homeland Security Job Board Network.

The partnership will give NDIA‘s 1,200 corporate and over 39,000 individual members access to thousands of industry jobs and over 5,000,000 aggregate candidates through DTN’s network of 27 industry targeted job boards. With the addition of DefenseJobs.com, DTN will further solidify its position as the nation’s leading Defense Technology, Aerospace and Homeland Security Job Board Network.

“NDIA, along with its affiliates, is a stellar organization committed to national security and we are proud to announce this partnership," said Jamie Hartling, Vice President, Business and Partner Development, Defense Talent Network Inc. “NDIA and DefenseJobs.com are an ideal fit for our vision to continue to be the nation’s number one defense staffing resource.”

“We are very pleased to be joining the Defense Talent Network, and believe this will vastly improve the value of defensejobs.com to our members and the industry overall,” said Thomas Nordby, AVP of Business Operations at NDIA.

For additional information please contact Jamie Hartling, Vice President, Business and Partner Development, Defense Talent Network Inc. or visit www.defensetalent.com

About the Defense Talent Network:
The Defense Talent Network is the Nation's Largest Defense Technology, Aerospace and Homeland Security Job Board Network, consisting of 27 industry targeted job boards and over 5,000,000 aggregate candidates, most with security clearances. The partners include industry associations, trade magazines and industry web portals.

About NDIA/DefenseJobs.com
Defensejobs.com was created by the National Defense Industrial Association (NDIA) to help connect defense contractors, government agencies and DoD with employees skilled in the defense industry.

Contact:
Jamie Hartling, Vice President, Business and Partner Development,
Defense Talent Network Inc.
941.803.8049
http://www.defensetalent.com

Posted by Industrial-Manufacturing at 10:46 PM | Comments (0)

Ohio Veterans Hall of Fame Foundation Announces Schedule of Events for 2005 Induction Ceremonies

The Ohio Veterans Hall of Fame Foundation announces the schedule of events for the class of 2005 induction ceremonies. The series of events will take place on Wednesday, November 2 and Thursday, November 3, 2005.

Columbus, OH (PRWEB) November 1, 2005 -- Ohio Veterans Hall of Fame Foundation President Douglas E. Lay announced the schedule of events for the upcoming 2005 hall of fame induction ceremonies earlier today.

The foundation will host a private reception for inductees and other invited guests at the Clarion Hotel, 600 Metro Place North, Dublin, Ohio 43017 from 6-9 p.m. on Wednesday, November 2, 2005.

On Thursday, November 3, 2005, a public reception hosted by the Governor’s Office of Veterans Affairs at 10:00 a.m. will be followed by the formal ceremony at 11:00 a.m. where Governor Bob Taft will confer the awards. Both the reception and the induction ceremony will be held at the Franklin County Veterans Memorial, 250 West Broad Street, Columbus, Ohio 43215.

Other participants in the formal ceremony will include:

- Timothy A. Espich, Director, Governor’s Office of Veterans Affairs (Master of Ceremonies)

- Charles P. Craig, President, Wayne County Veterans Service Commission (Call to Order)

- The Ohio National Guard (Posting of the Colors)

- The Navy & Marine Corps Operational Support Center (Posting of the Colors)

- The United States Air Force Band of Flight, Wright Brass Ensemble (National Anthem and Armed Forces Medley)

- Colonel Christine M. Cook, Superintendent, Ohio Veterans Home (Pledge of Alliance)

- Colonel Kenneth N. Daft, Ohio Army National Guard (Invocation)

- Derek Brown (America the Beautiful)

Those being inducted include Cameron R. Agin (Zanesville); James W. Anderson (Medina); David A. Barker (Portsmouth); William A. Boettcher (Cincinnati); Alex A. Boudreaux (Columbus); Dorothy S. Budacki (Mogadore); Marshall W. Busey (Cleveland); James Comedy (deceased – formerly of Akron); Edward W. DeLaet (Dayton); John W. Erby (Cincinnati); Eugene M. Fellmeth (Canal Fulton); Joseph B. Foraker (deceased – formerly of Cincinnati); Robert M. Galvin (Port Clinton); John J. Nicastro (Independence); Joseph A. Peters (Alliance); James Quisenberry (Lakewood); Robert B. Steele (Xenia); Betty Stagg Turner (deceased – formerly of Cincinnati); Maynard W. Unger (Lakewood); and Joseph Vance (deceased – formerly of Urbana).

Posted by Industrial-Manufacturing at 10:45 PM | Comments (0)

Belden Expands Line of DataTuff® Industrial Ethernet Cables with Addition of 2- and 4-Pair Category 5e Cables

Belden CDT Electronics Division, a world leader in the development of specialty cable products for industrial, commercial, broadcast and residential markets, announces that it has once again expanded its line of DataTuff® Category 5e and Category 6 Industrial Ethernet cables.

Richmond, IN (PRWEB via PR Web Direct) October 31, 2005 -- Belden CDT Electronics Division, a world leader in the development of specialty cable products for industrial, commercial, broadcast and residential markets, announces that it has once again expanded its line of DataTuff® Category 5e and Category 6 Industrial Ethernet cables. Two new Category 5e cables have been added to Belden's comprehensive selection of Industrial Ethernet cables, which includes DataTuff Cat 5e and Cat 6 twisted pair copper cables and TrayOptic® fiber optic cables.

Both of the new DataTuff copper cables feature Belden's patented Bonded-Pair technology which assures superior electrical performance before and after installation. Belden calls this after-installation performance capability Installable Performance®.

Belden's new Bonded-Pair DataTuff cables include:
• Belden 7932A - 2-pair, 24 AWG, unshielded, Category 5e Bonded-Pair cable is CMR FT4 rated, features solid bare copper conductors, polyolefin insulation, industrial grade sunlight- and oil-resistant PVC jacket (Black or Teal), and is EtherNet/IP* compliant.
• Belden 7934A - 4-pair, 24 AWG, unshielded, Enhanced Category 5e Bonded-Pair cable features solid bare copper conductors, polyolefin insulation, sunlight- and oil-resistant black polyethylene jacket, and is EtherNet/IP* compliant. The cable is waterblocked for burial applications.

All of Belden's Industrial Ethernet cables are expertly designed and engineered to provide superior performance and reliability. They are ruggedly constructed to withstand harsh industrial and environmental conditions – including sunlight, temperature variations, oil and gasoline, crushing and abrasion. As a result, the cables ensure optimum network performance and uptime and avoid transmission errors that can lead to unsafe conditions or interruption of critical industrial control functions.

For more information about Belden's DataTuff® and TrayOptic® Industrial Ethernet cables, contact Belden CDT Electronics Division, P.O. Box 1980, Richmond, Indiana 47375, or call 1-800-BELDEN-4 to request New Product Bulletin NP231. FAX: 765-983-5294. Or visit the Web site: www.belden.com.

About Belden CDT Electronics Division
Belden CDT Electronics Division, a unit of Belden CDT Inc., is a leader in the design, manufacture, and marketing of cable products for the entertainment, residential, industrial and security markets. It also provides highly engineered products for both the aerospace and automotive markets. Belden CDT Electronics Division is headquartered in Richmond, Indiana, it has manufacturing facilities in North America and Europe and distribution centers in the U.S., Canada, Singapore, Australia and the Netherlands. A majority of Belden's manufacturing, engineering and support functions are registered to the International Organization for Standardization.

Belden CDT Inc., formed in July 2004 through the merger of Belden Inc. and Cable Design Technologies Corp., is one of the largest U.S.-based manufacturers of high-speed electronic cables and focuses on products for the specialty electronics and data networking markets, including connectivity.

*EtherNet/IP is a trademark of ControlNet International, Ltd. under license by Open DeviceNet Vendor Association, Inc.

Company Contact:
Belden CDT Electronics Division
Frank Stone
1-800-BELDEN-4

Media Contact:
Adventive Marketing, Inc.
Janet Killen
847-590-1110

Posted by Industrial-Manufacturing at 10:45 PM | Comments (0)

SecureUSA Looks to Improve Customer Service: Agreement with Delta Scientific Ends

SecureUSA, Inc., the leading provider of turnkey perimeter defense solutions, announced that its marketing agreement with Delta Scientific will be ending on October 31, 2005.

Atlanta, GA (PRWEB) October 31, 2005 -- SecureUSA, Inc., the leading provider of turnkey perimeter defense solutions, announced that its marketing agreement with Delta Scientific will be ending on October 31, 2005. SecureUSA stated the ending the agreement was due to market and industry changes as they move forward to improve customer service and provide more comprehensive perimeter defense solutions.

SecureUSA, Inc., began business in 1997 as a service and maintenance contractor for anti-vehicular perimeter defense barriers. They quickly became Delta Scientific’s largest equipment reseller and integrator. With the advent of 9/11, SecureUSA developed a unique market position as being the only provider of comprehensive perimeter defense solutions in North America, being able to provide consulting, design engineering, and project management services for complete turnkey projects. “SecureUSA is in a unique position as the only full service, turnkey solution provider of perimeter defense solutions in North America” said Michael (Mick) Keough, SecureUSA’s Chief Operating Officer. “This means that we need to expand our range of crash barriers and intrusion defense equipment in order to better serve our customers. In the last two years there has been several new manufacturers enter the market place with new technology and leading edge designs that promise better aesthetics and lower maintenance costs, both of which are being demanded by the many corporate buyers now seeking perimeter defense solutions.” he added.

The natural market growth following 9/11 has spawned many new manufacturers in the market place, bringing the customer a wider variety of new and innovative products. SecureUSA has decided to continue to stand behind its commitment to bring the customer the best solution possible. The decision to end the agreement was ultimately a result of this commitment as Mick Keough, Chief Operating Officer, stated, “In order to serve our clients with full integrity, it is imperative that we do not favor one product line over another. Our job is to fully evaluate and understand these new products and the changing customer requirements, so that we can provide our clients with the best perimeter defense solution available anywhere in the world.”

“SecureUSA will continue to offer Delta equipment and provide service and maintenance contracts for their barriers as a part of their turnkey perimeter defense solutions” said Mitch Morgan, SecureUSA’s President. He added “As the market changes and grows we will also change and grow to exceed our customer’s expectations”.

About SecureUSA, Inc.
SecureUSA, Inc. provides turnkey anti terrorist perimeter defense solutions to help protect North America’s infrastructure from attack. SecureUSA is a complete turnkey provider for the prevention of vehicular and personnel intrusion into “At Risk” private and government facilities. SecureUSA offers consulting, engineering, and project management services. This is followed by ongoing service and maintenance to ensure continued trouble free operation of the client’s perimeter security system.

For more information visit www.SecureUSA.net.

Posted by Industrial-Manufacturing at 10:44 PM | Comments (0)

For Adventurer/Aviator, it’s One Step Forward, Three Back

On a recent check flight, more problems arose for Gus McLeod's experimental aircraft, "The Firefly." The brakes needed adjusting ... then, an oil leak ... and then, blocked fuel injectors. At this point, Gus feels more test flights are a must before attempting his Pole-to-Pole adventure.

Gaithersburg, MD (PRWEB) October 30, 2005 -- Up at 5AM ... in the Firefly by 6:30AM ... for a flight from Frederick to Gaithersburg. That was the easy part. Then ... dramatic drum roll ... the problems started.

“The Brakes needed an adjustment, very normal, just another airplane thing. Then, an oil leak ... again normal, none-the-less annoying ... but I can isolate and fix it,” said Adventurer/Aviator Gus McLeod in today’s interview.

McLeod was planning a quick test flight to have Kevin Murry, the genius who designed and built his customer turbo charger, check out the plane for the last time. According to McLeod, “He's the best in the business. All the air show performers use his exhaust systems.” A flight to his house on Smith Mountain Lake would be a chance to let him check the repairs on the engine. “More than anyone else, I respect what Kevin has to say about an airplane,” added McLeod.

Thirty miles out from Gaithersburg, the fuel flow read 11 gallons per hour. It should have read 15 gallons per hour. No problem ... McLeod pushed the mixture lever and gave it more gas. But the mixture level was already full rich. In an aircraft you can vary the mixture to maximize performance and economy at various altitudes. As the engine is starved for fuel (leaned out) it will get hotter. The Firefly’s engine temperatures was climbing. Gus reduced power to cool it down, but it had no effect.

What made matters worse was that he had his photographer with him

McLeod notified Air Traffic control he was returning to Gaithersburg. Along for the ride was Team Firefly’s official photographer. He was to get some pictures of Kevin and Gus together. He asked, "Why are we turning around?" No time for a lecture on fuel flow, there’s a problem. Thirty miles seems like a thousand when there is a problem. The photographer asked to go a little to the left to get a shot of something interesting on the ground. McLeod ignored him as some idle chatter come over his headset. Then the photographer repeated the request. Gus, who has flown the Firefly for over 20,000 miles with no one in the right seat needed to tell his passenger that there was a problem. It has always been just Firefly and Gus to work out the problems.

“We are different aspects of the same entity,” said McLeod. “Firefly is the body, I am the brain. There is no plane, there is no me, there is just one and we are. I found myself at a loss as to what to say to the photographer. So I said, there is a problem, we're going back to Gaithersburg." Something in the way he said it stopped all conversation and he was content to take pictures out of the window.

Firefly made it back to Gaithersburg using only 30% power. “I knew as we were landing what the problem was. It's a blocked fuel injector” said McLeod. “The Korean engineers have gone home. It will take me at least two days to fix it by myself. Maybe Firefly is trying to tell me something. We need a longer test flight. My North Pole section of this trip is 2,200 nautical miles. From Gaithersburg to Seattle it's 2,100 nautical miles. On my North Pole section on this trip there is no town, no airport or any human over the entire 2,200 mile course. From Gaithersburg to Seattle there are lots of people and lots of places to land. The entire flight from Gaithersburg to Seattle can be made without being more than 50 miles from an airport. If I can take a series of flights out to Seattle, it will give me time to work out all these small annoying problems. I can fuel up and do a direct flight back as a long range test. If I can do that, I feel we can make the North Pole anytime.”

According to publicist, Steve Rosenberg, “the plan is to clean the fuel injectors Saturday or Sunday. Then Gus will take off for the coast on a long test flight - Team Firefly will then decide whether to proceed with the big trip, or hold off until there's both light and better weather at the North Pole.”

The year 2000 flight to the North Pole was chronicled in both a National Geographic “Explorer” television special and “Solo to the top of the world,” from Smithsonian Books, written by McLeod.

For further updates or to schedule an interview with Gus McLeod, contact Steve Rosenberg at (703) 658.1302.

Posted by Industrial-Manufacturing at 10:43 PM | Comments (0)

Southwest Airlines Gives Customers What They Want; Airline Adds Flights in 42 City-pairs, Including New Orleans

Dallas, TX (PRWEB via PR Web Direct) October 27, 2005 -- Southwest Airlines (NYSE: LUV) announced today the addition of 49 new flights in 42 city-pairs across the nation, eight of which will serve New Orleans. The new flights will be added in two installments. To take advantage of this new Southwest Airlines service and super low fares, visit: http://www.southwest.com/jp/luvhome.shtml?src=PR_newservice_102705

"Southwest Airlines Customers are traveling at record rates, and they're asking for more flights," said Joyce Rogge, Southwest Airline's Senior Vice President of Marketing. "We're simply giving our Customers what they want."

The 49 additional flights break down as follows:

BEGINNING NOVEMBER 12, 2005
New Orleans Service:
* Two new daily nonstop roundtrips between New Orleans and Dallas Love Field.
* Two new daily nonstop roundtrips between New Orleans and Nashville.
* Two new daily nonstop roundtrips between New Orleans and Orlando.
* Two new daily nonstop roundtrips between New Orleans and Tampa Bay.
* Previously announced: One additional daily nonstop roundtrip between New Orleans and Houston (for a total of five daily).

Other New Service:
* One new daily nonstop roundtrip between Las Vegas and Oklahoma City.
* One new daily nonstop roundtrip between Las Vegas and Providence.
* One additional daily nonstop roundtrip between Las Vegas and Spokane (for a total of two daily).
* One additional daily nonstop roundtrip between Las Vegas and St. Louis (for a total of two daily).

"We are especially pleased to see demand increasing in New Orleans," said Rogge. "Our load factors have been high, and we are pleased to be rebuilding our New Orleans service. As aircraft availability permits, Southwest Airlines will continue to adjust its New Orleans flight schedule to respond to increasing Customer demand."

BEGINNING FEBRUARY 5, 2006 (due to schedule adjustments)
* One additional daily nonstop roundtrip between Albuquerque and Houston Hobby (for a total of three daily).
* One additional daily nonstop roundtrip between Albuquerque and Oakland (for a total of three daily).
* One additional daily nonstop roundtrip between Austin and Nashville (for a total of three daily).
* One additional daily nonstop roundtrip between Austin and San Diego (for a total of two daily).
* One additional daily nonstop roundtrip between Birmingham and Orlando (for a total of two daily).
* Two additional daily nonstop roundtrips between Burbank and Oakland (for a total of 16 daily).
* One additional daily nonstop roundtrip between Chicago Midway and Philadelphia (for a total of eight daily).
* One additional daily nonstop roundtrip between Chicago Midway and Sacramento (for a total of two daily).
* One additional daily nonstop roundtrip between Ft. Lauderdale/Hollywood and Houston (for a total of two daily).
* One additional daily nonstop roundtrip between Houston Hobby and Philadelphia (for a total of two daily).
* One additional daily nonstop roundtrip between Houston Hobby and Tampa Bay (for a total of two daily).
* One additional daily nonstop roundtrip between Indianapolis and Kansas City (for a total of two daily).
* One additional daily nonstop roundtrip between Jacksonville and Philadelphia (for a total of two daily).
* One additional daily nonstop roundtrip between Jacksonville and Tampa Bay (for a total of three daily).
* One additional daily nonstop roundtrip between Kansas City and San Diego (for a total of two daily).
* One additional daily nonstop roundtrip between Kansas City and St. Louis (for a total of six daily).
* One additional daily nonstop roundtrip between Kansas City and Tampa Bay (for a total of two daily).
* One additional daily nonstop roundtrip between Las Vegas and Philadelphia (for a total of two daily).
* One additional daily nonstop roundtrip between Las Vegas and Tucson (for a total of six daily).
* Two additional daily nonstop roundtrips between Long Island/Islip and Chicago Midway (for a total of seven daily).
* One additional daily nonstop roundtrip between Nashville and Ft. Lauderdale/Hollywood (for a total of two daily).
* One additional daily nonstop roundtrip between Nashville and Jacksonville (for a total of four daily).
* One additional daily nonstop roundtrip between Nashville and Las Vegas (for a total of four daily).
* One additional daily nonstop roundtrip between Nashville and Orlando (for a total of five daily).
* One additional daily nonstop roundtrip between Nashville and San Antonio (for a total of two daily).
* One additional daily nonstop roundtrip between Nashville and Tampa Bay (for a total of five daily).
* Two additional daily nonstop roundtrips between Oakland and San Diego (for a total of 20 daily).
* One additional daily nonstop roundtrip between Oakland and Orange County (for a total of nine daily).
* One additional daily nonstop roundtrip between Orlando and San Antonio (for a total of two daily).
* One additional daily nonstop roundtrip between Philadelphia and Phoenix (for a total of two daily).
* One additional daily nonstop roundtrip between Philadelphia and Pittsburgh (for a total of seven daily).
* One new daily nonstop roundtrip between San Diego and San Antonio.
* One additional daily nonstop roundtrip between St. Louis and Tampa Bay (for a total of two daily).
* One additional daily nonstop roundtrip between Tampa Bay and Ft. Lauderdale/Hollywood (for a total of nine daily).

Southwest Airlines is offering special low fares on its new Las Vegas service. Fares start as low as $69 one-way between Las Vegas and Oklahoma City, Las Vegas and Spokane, and Las Vegas and St. Louis, and as low as $89 one-way between Las Vegas and Providence. The special Las Vegas fares are available for purchase today through Dec. 8, 2005, and are valid for travel from Nov. 12, 2005, through Dec. 15, 2005. Tickets must be purchased at least seven days before departure.

General Fare Rules
Fares are available one-way and are combinable with all other fares. When combining fares, all ticketing restrictions apply. Seats are limited. Fares may vary by destination and day of travel and will not be available on some flights that operate during very busy travel times. Fares do not include a $3.20 federal segment tax per takeoff and landing. Fares do not include airport-assessed passenger facility charges (PFC) of up to $9 one-way and U.S. government-imposed September 11th Security Fees of up to $5 one-way. Fares are subject to change until ticketed. Tickets are nonrefundable but may be applied toward the purchase of future travel on Southwest Airlines. Fares are valid on Southwest-operated published, scheduled service only and are not available through the Group Desk. Any change in itinerary may result in an increase in fare.

To take advantage of Southwest Airlines' super low fares, Customers who book their travel via the Internet can subscribe to Southwest Airlines' Click 'n Save email updates as well as Southwest Airlines' newest technological innovation - DING! DING! delivers Southwest Airlines' hottest deals directly to Customers' desktops allowing Customers to get a jump on the latest southwest.com sales! For more information, visit http://www.southwest.com/ding/ .

http://www.southwest.com

Media Contact:
Public Relations of Southwest Airlines +1-214-792-4847

Posted by Industrial-Manufacturing at 10:41 PM | Comments (0)

Aerospace - Defense

Aerospace Machinists - Aerospace Metals, Tubing, Seals, Adhesives - Aerospace Technology

Industrial Product Directories

Aerospace & Defense News Categories

Recent Entries

Search

Archives

November 30, 2005

WNYW’s SKYFOX is First HD News Helicopter in New York Market

Homeland Security Official Justin Oberman to Join Crestview Capital Funds

SENTEL Makes Big Leap in Sensor Integration With MicroRDR; SENTEL’s Micro Remote Data Relay Delivers Security Innovation in a Compact Package

SportairUSA Pioneers With Yet Another First -- Light Sport Aircraft (LSA) Airbag Restraints; Will Showcase StingSport at Camarillo CA EAA Sport Pilot Tour

November 29, 2005

U.S. Army Corps of Engineers Chooses DRI Consulting for Leadership Training and Development Contract

Troux Technologies Demos Powerful EA Client Tools for DoDAF at CISA

GTES Announces Relocation of SHERLOC™ Location Servers to PEER 1 World-Class Data Center

Kozio, Inc. Names New Director of Sales; Allan Arendt Joins Longmont-based Provider of Advanced Embedded Test Software for CPU Boards

November 28, 2005

Integre Technologies Selected As Texas Instruments Authorized Design Center

Evergreen Air Center Captures Livery Painting Award for Airbus A310 Aircraft

November 25, 2005

Aspen Avionics AT300 Hazard Display Awarded FAA Certification

November 24, 2005

SEA Member Meeting Set for December 7, 2005

SVM Launches the 2005 E-Business Trends in Manufacturing Survey

November 23, 2005

Hi-Tec Systems Well-Represented at Engineer Awards

November 22, 2005

Leading Tech Vendors Drive Sales with Online PR

Micro/sys Releases EPIC Celeron/Pentium III Computer Board for GUI Applications

SVM Launches the 2005 E-Business Trends in Manufacturing Survey

FIPS 140-2 Certification Awarded to MOBILE ARMOR for its Advanced Cryptographic Module Used Across the Linux, Windows and Windows Mobile Platforms

Marotta Selected By Aviation Week as Product Breakthrough Award Finalist

November 21, 2005

AFIT Accelerated Flight and Instrument Training... Our clients Increasingly Realize The Importance To Train With The Industries Finest Flight Instructors

SEA Expands its Supplier Executive Briefing Schedule to Two New Key States

Aircraft Anti-Hijacking-Collision Systems Previews Addition for Pilot and Passenger Safety

Hi-Tec Systems Names Philip N. Gray as Vice President of Business Development

Southwest Airlines Offers Travel Tips for Holiday Trips

November 18, 2005

SmartClixx Clears the Runway for the southwestgiftcard

November 17, 2005

Solid Converter PDF v3.0 Enhances PDF Conversion and Creation Capabilities

Pilots Increasingly Realize The Importantance To Train With The Industries Finest Flight Instructors

Co-Operative Industries Aerospace Receives CAAC Repair Station Approval

BPS: Homeland Security; Protecting our Borders through Biometrics, RFID, Surveillance and Sensor Technology

November 16, 2005

Lowfares.Com Travel Web Site Re-Launches as Premier Online Travel Comparison Research Site

Keeping in Step With the Needs of Rework Technology

Okino’s PolyTrans Provides Conversion of All Major 3D CAD and DCC Files into the NGRAIN 3KO File Format

Okino Computer Graphics Ships Second Generation of Precise, Solids-Based CATIA v4, CATIA v5 and ACIS SAT CAD Import Converters

SEA Announces Expanded Role for its Authorized Service Providers

November 15, 2005

MAXjet, a New International Airline, Deploys SOA for Speed, Agility

Kozio, Inc. Joins Freescale Tools Alliance; Kozio Tools to Help Speed Time-To-Market, Reduce Cost of Test for Freescale Customers

People on the Move: Dr Steven Windmill, Recently Recognised by Who's Who as One of the UKs Leading Businessmen, is Profiled by The Executive Club

November 14, 2005

RAS (Remote Astronomical Society) Observatory Announces Second Free Web-based Seminar on Asteroid Hunting -- General Public Invited

Marotta Recognized for Quality Performance

November 13, 2005

Adacel To Provide Precision Approach Radar Training Systems to United States Air Force

Companies and Government Departments Donate Computers to Veterans, Elderly Institutions, and Army Related Groups During Rememberance Day Celebration

People on the Move: Steven Windmill, Recently Famed by Who's Who has been Profiled by The Executive Club as a Leading Businessman, Strategist and Leader

Guaranteed Airport Parking Just a Click Away

November 11, 2005

Intelligent Production Machines and Systems Conference 2006 (IPROMS 2006)July 3-14, 2006

SportairUSA to Showcase StingSport at McKinney Texas EAA Sport Pilot Tour November 12 and Extend Complimentary XM Satellite Services

eCycle Awarded Contract to Provide Brushless Fan Solution to Aurora Flight Sciences

November 10, 2005

Veterans Day Forum – Personal Insights on Veterans Day at VetFriends.com

Saluting the Military at the Performance Race Training Center

November 09, 2005

Law Enforcement Training Group Provides Defensive Training and Edged Weapon Awareness to Police

Department of Homeland Security Continues to Infringe on Whistleblower Rights, ACLU/SC Says

QuantumSphere to Fundamentally Alter Battery, Fuel Cell Markets

Optical Alchemy Strengthens Management Team, Names Jennifer Richardson Vice President of Engineering to Address Military Unmanned Aerial Vehicle Market

Direct Part Marking in the Aerospace Industry

November 08, 2005

Symmetricom Announces Enhanced Militarized Rubidium Oscillator

Ohio Flags of Honor Foundation Announces Schedule of Events to Honor Ohioans Killed in Action in Iraq and Afghanistan