March 24, 2022

Cenergies Unlimited Launches the [email protected]

A home and office energy savings device that can save up to 20% on electricity bills by displaying energy spending in real-time. The [email protected]™ also shows greenhouse gas emissions so that by understanding the damage to the environment, the consumer is able to cut their energy usage on several levels.

Austin, TX (PRWEB) March 24, 2022 -- With the United States experiencing record high energy prices and with the approaching summer heat, the U.S. is sorely in need of a simple device that monitors spending on electricity and puts valuable information in the hands of the individual consumer. The [email protected]™ is just that device.

The [email protected]™ is a simple to use, wireless monitor that displays a home or office’s total energy spend in real time. When an appliance, air conditioner or even a light bulb is turned on, the [email protected]™ immediately senses the increased energy load and displays in real-time the resulting cost and kilowatts per hour being consumed. It can even display the amount of green house gas that is attributed to the current energy consumption. Armed with this information, the consumer finally has a simple way to monitor and effectively conserve electricity, save dollars and reduce the burden on the environment.

Kent Nelson, President of Cenergies Unlimited, a distribution company that specializes in energy saving and “green” devices states: “Over time, the [email protected]™ builds a keen awareness of what things cost to run and thus encourages conservation. We’re excited about the [email protected]™ because with a little effort, it can have a real impact on the customer’s electric bill.”

The [email protected]™ also is equipped with an alarm that can be set to sound when consumption exceeds a preset limit, as well as a digital thermometer and humidity sensor, all packaged in an attractive case that measures about four inches square.

Nelson also notes the energy auditing capabilities of the product “Essentially the [email protected]™ enables the consumer to isolate individual appliances such as a refrigerator, electric dryer or air conditioner compressor and accurately determine how much energy each are using. It is then simple to compare that existing appliance to modern, more efficient units and to make an informed decision as to whether it makes sense to invest in a new Energy Star rated product. You’ll be shocked at how much more you’re spending using that 20 year-old dryer.”

The [email protected]™ is available for purchase at $130.00 by calling 877-227-2922 or online at www.cenergies.com where more information about the product is available. The [email protected]™ is also available to wholesale customers. The [email protected]™ must be installed by an electrician. Cenergies Unlimited has partnered with Mr. Electric, a nation-wide electrical service company for installation if desired.

Contact information:
Sarah Binion, Marketing Director Cenergies Unlimited 512.530.2545
Cenergies Unlimited
9501 Cargo Ave, Suite 100
Austin, Texas 78719
www.cenergies.com

Posted by Industrial-Manufacturing at 03:05 AM | Comments (0)

WEEE Directive – Is Your Business Prepared?

A new free service has been launched to help businesses co-ordinate both the disposal and acquisition of Waste Electrical and Electronic Equipment (WEEE) across the UK.

(PRWEB) March 24, 2022 -- Under the EU's WEEE Directive, from August 2005, all UK businesses will be required, by law, to re-use and recycle 100% of their end-of-life electrical equipment. Failure to comply with this legislation will result in a fine or even imprisonment.

“The first problem businesses will encounter when trying to comply with the legislation is to find a WEEE recycler that matches all of their individual requirements. This could take days of searching for, and contacting recyclers for quotes. Our new and unique systems allow businesses to reduce search time to minutes rather than days.” – Lee Sykes - Director of Operations

The WEEE Recycling Directory is a unique website that contains two main areas. The first is the directory of WEEE recyclers across the UK and the second is the WEEE Tenders & Collections section.

The WEEE Recycling Directory ensures that users can quickly search for a recycler in their area by specifying the type of equipment, such as IT Equipment, Fluorescent tubes etc. and the location from which it is to be collected. Other specialist criteria can also be stipulated, for instance, to donate the equipment to charity or the requirement to wipe hard disks to military standards.

Visit http://www.weeedirectory.com for the latest information regarding how to comply with the WEEE Directive and to search for a WEEE recycler in your area.

Notes to Editor:
1. The WEEE Recycling Directory aims to provide a central resource and service for WEEE. To benefit both businesses and recyclers and to provide an environment where the recycling business can grow.
The WEEE Recycling Directory website is maintained by LJS Media, an independent organisation that creates website services. This enables LJS Media to offer the WEEE Recycling Directory service with no bias to any recyclers or businesses, enabling a business searching for a service to obtain the most competitive quote possible.
2. All of the services on the website are free of charge. The website is paid for through advertising.

Posted by Industrial-Manufacturing at 03:03 AM | Comments (0)

March 09, 2022

Protonex and Millennium Cell Deliver ‘Industry First’ to U.S. Air Force

Southborough, MA and Eatontown, NJ--March 9, 2005-- Protonex Technology Corporation, a manufacturer of high performance fuel cell power sources for portable and remote applications, and Millennium Cell Inc. (NASDAQ: MCEL), a leading developer of hydrogen energy systems, announced that they have delivered to the U.S. Air Force the industry’s first fully-integrated 30 Watt portable fuel cell power system fueled by chemical hydride cartridges.

Southborough, MA and Eatontown, NJ (PRWEB) March 9, 2022 -- Protonex Technology Corporation, a manufacturer of high performance fuel cell power sources for portable and remote applications, and Millennium Cell Inc. (NASDAQ: MCEL), a leading developer of hydrogen energy systems, announced that they have delivered to the U.S. Air Force the industry’s first fully-integrated 30 Watt portable fuel cell power system fueled by chemical hydride cartridge.

This portable power system, (referred to as P1), is the first deliverable under a previously announced U.S. Air Force Research Laboratory, Dual Use Science and Technology (DUST) contract awarded to Protonex. The system integrates Millennium Cell’s hydrogen energy system into Protonex’s PEM fuel cell platform to provide a fuel cell power source for soldiers on extended field missions.

"The delivery of P1 midway through the DUST program represents a significant milestone in the development of soldier power systems,” said Thom Reitz, Research Leader, Fuel Cells for the Air Force Research Lab. “The Air Force is very interested in evaluating this system as a means for significantly reducing the overall power system weight burden carried by the war fighter. We are looking forward to testing P1 and providing feedback to advance the technology to the next readiness level for the final deliverable due later in 2005.”

The P1 unit represents a substantial improvement in energy density and cost over the batteries currently used by the U.S. Military. Today, to fulfill the requirement for 30 Watts of continuous power for a 72-hour mission, soldiers carry 13 primary batteries weighing over 29 pounds. The P1 system is capable of meeting these power requirements at less than 50% of the weight (including fuel cell platform and snap-in fuel cartridges).

“Protonex and Millennium Cell are delighted to deliver a superior power solution to the U.S. Air Force that provides both performance and cost advantages over incumbent battery technology,” said Scott Pearson, CEO, Protonex. “The P1 units clearly demonstrate the value and utility of our fuel cell systems for portable military applications and keep us on the path for potential deployment.”

”This is an important milestone for both companies,” commented Adam Briggs, Senior Vice President, Millennium Cell. “Later in 2005, we expect to deliver a next generation system to the Air Force that will further reduce the weight of the power system with its cartridges to less than 10 pounds. The benefits of this power solution will also be attractive in many other military and commercial markets that need reliable, long lasting sources of energy.”

About Protonex Technology Corporation
Established in 2000, Protonex manufactures long duration, portable and remote power sources. Protonex provides complete power solutions to OEM customers for portable and remote off-grid applications underserved by existing battery, generator, solar and other power technologies. The company’s innovative fuel cell products complement existing power technologies and are utilized in hybrid designs for customer applications in the 10 to 500 Watt power range. For more information, visit http://www.protonex.com.

About Millennium Cell
Millennium Cell Inc. is engaged in the development of next generation hydrogen energy systems for use primarily in portable electronic devices for the consumer, medical, military and industrial markets. These energy systems offer runtime, weight, safety and cost advantages in an attractive form factor versus existing solutions. Millennium Cell is developing this technology in partnership with corporate and government entities. For more information, visit http://millenniumcell.com.

Millennium Cell Cautionary Note Regarding Forward-looking Statements:
This press release may include statements that are not historical facts and are considered” forward-looking” within the meaning of the Private Securities Litigation Reform Act of 1995. These forward-looking statements reflect Millennium Cell’s current views about future events and financial performance and are subject to risks. Investors should not rely on forward-looking statements because they are subject to a variety of risks, uncertainties and other factors, many of which are outside of our control, that could cause actual results to differ materially from Millennium Cell’s expectations, and Millennium Cell expressly does not undertake any duty to update forward-looking statements. These factors include, but are not limited to, the cost and timing of development of Millennium Cell’s hydrogen fuel storage and delivery system; the cost and commercial availability of the quantities of raw materials required by the hydrogen fuel storage and delivery systems; and other factors discussed under the caption “Investment Considerations” in Millennium Cell’s Annual Report on Form 10 K for the year ended December 31, 2021

Posted by Industrial at 05:06 AM | Comments (0)

March 04, 2022

Welcome to Convert-A-Phase, Inc. for Shopping Phase Converter Online

Convert-A-Phase, Inc. - Providing you with premium rotary phase converter at affordable prices.

(PRWEB) March 4, 2022 -- If you are in search of high-end converters for your compressors, pumps, elevators, metal/woodworking machines for use in factories, woodworking workshops and processing plants, we serve you best with our rotary 3 phase converters. Our designs have gone through the rigorous Underwriters Laboratories testing and approval [Ind. Cont. Eq. 75U6], which means we serve you with the best power transmission equipments.

While the static phase converter drives a single motor, limit the motor's torque and give less output when compared to 3 phase converters, we have come up with rotary 3 phase converter items, specifically designed for optimal phase conversion efficiency and endurance for industrial grade tools.

Operating from California, USA, we provide "Green Line" and "Silver Line" converters while the technology behind our 3 phase rotary converters are presented as follows :

1. Using the same components of electric motors, we have added the best features to redesiged those components (rotor, laminations and winding density)
2. More efficient phase conversion is ensured

A few of the salient features of our phase converter -
A. Our Converter Rotor Assembly : The "heart" of our converter has been specifically designed for optimal Phase conversion efficiency and endurance. Featuring our proprietary armature design, our converters operate cool and quiet.
B. American Made Quality : Manufactured in the USA to our specifications by Baldor Electric Co. and Marathon Electric, both trusted names in quality motor manufacturing. Final assembly and check out is performed at our facility to maintain the highest quality and performance control.
C. Patented Design / Leading Edge Technology : Convert-A-Phase has secured the first two patents pertaining to phase converters in sixteen years! (US Patents: 4,777,421 & 4,656,575)
D. Underwriters Laboratories (UL) Seal of Approval " (Ind. Cont. Eq. 75U6 / File # 107960)" Granted to Convert-A-Phase line of Phase Converters. (Ind. Cont. Eq. 75U6) : This hard earned distinction provides our customers with a unprecedented level of confidence and peace of mind within the converter industry. Check out our competitors, you will see we have "gone the extra mile" to prove we offer the best in value and performance. "We were also instrumental in getting the National Electrical Code to introduce Article 455 and we conform to that code for specifying engineers."

Why Convert-A-Phase, Inc.?
A. Patented Phase Converter Design
B. Highest Efficiency
C. Efficient Cooling
D. Unconditional Guarantee on Parts and Labor for One Year Plus Lifetime on Rotor

To know more, contact us at our toll free no 888-739-9392 or visit our website http://www.convertaphase.com.

Address: 1022 W. Mission Avenue,
Escondido, CA 92025, USA
tollfree: 888-739-9392
phone: 760-745-4900

Posted by Industrial at 01:21 AM | Comments (0)

February 21, 2022

Sensor System Solutions, INC. (3S) Announces New Low-Cost Panel Mounted Digital Pressure Gauge

Sensor System Solutions, Inc. (OTCBB:SSYO) introduced a new product -Model 1205 Low-Cost Panel Mounted Digital Pressure Gauge, which combines the solid-state pressure sensing technology with modern microprocessor electronics to provide accurate digital pressure readout.

Irvine, CA (PRWEB) February 21, 2022 -- Sensor System Solutions, Inc. (OTCBB:SSYO) introduced a new product - Model 1205 Low-Cost Panel Mounted Digital Pressure Gauge, which combines the solid-state pressure sensing technology with modern microprocessor electronics to provide accurate digital pressure readout.

The design of Model 1205 offers a 4-digit LCD digital display, digital zeroing feature, continuous or peak & hold display, and 200% overpressure protection. Standard unit comes with a ¼-18 NPT pressure port for ease of installation. This gauge can operate on 110 VAC (Standard), 220 VAC, or can be used with external 12VDC power. Private label or custom design for OEM application is also available.

Based in Irvine, California, 3S develops and markets Micro-Electro-Mechanical Systems (MEMS) and thin-film sensors to medical, chemical, oil, and gas industries. 3S also offers a line of specialty products to allow process-oriented industries to bring new levels of intelligent control and monitoring to their operations. These products include wireless data acquisition and sensor interface devices, and intelligent data collection and distribution products.

For more information, contact: Danny Uehara, 3S, 45 Parker Street, Suite A, Irvine, California 92618, Phone: 1-949-855-6688 ext. 110, Fax: 1-949-855-6685, E-mail: sales @corp3s.com.
Web site: http://www.corp3s.com/ or http://www.acsensor.com

Posted by Industrial at 07:30 PM | Comments (0)

February 16, 2022

WeatherWise USA Adds Risk Management to Product Line

New Service Lowers Risk of Fixed Bill Programs
WeatherWise USA announces the addition of Risk Management to its portfolio of products. WeatherWise’s Risk Management is a formal structure to provide utilities offering fixed bill products with advanced risk management technology, and even more importantly, a guarantee of program performance. WeatherWise is best known for its support of energy companies offering fixed bill products to their consumers. They provide the analysis critical to successful electric or gas fixed bill implementation by factoring in variability in usage patterns, weather, and energy prices.

Pittsburgh, PA (PRWEB) February 16, 2022 -- WeatherWise USA announces the addition of Risk Management to its portfolio of products. WeatherWise is best known for its support of energy companies offering fixed bill products to their consumers. They provide the analysis critical to successful electric or gas fixed bill implementation by factoring in variability in usage patterns, weather, and energy prices. This results in reduced risks and operating costs to the energy companies and to their consumers. WeatherWise utilizes its proprietary computer models and expert analysis to provide appropriate fixed bill quotes for each individual consumer.

WeatherWise’s Risk Management is a formal structure to provide utilities offering fixed bill products with advanced risk management technology, and even more importantly, a guarantee of program performance. "We are confident of our capabilities in electric and gas fixed bill programs and are certain of our ability to manage all the underlying risks," states Rand Warsaw, CEO of WeatherWise USA. "So much so that we are willing to back our product by putting our own money at risk."

WeatherWise is no stranger to risk. Their entire business is built around energy risk management and financial engineering. “In any fixed bill program there are risks to the company offering the product, such as market penetration levels, energy purchasing, pricing, consumer behavior, and model issues that include temperature bias or selection bias, and numerous weather-hedging concerns," explains Severn Wright, Manager of Financial Engineering. "WeatherWise actively manages those risks and we work with our customers to control their specific risk factors.”

Board member Barry Fingerhut, of Wheatley Partners, sees the addition of Risk Management to the fixed bill product line as changing the entire competitive landscape. "Companies in the fixed bill support marketplace compete on the capabilities of their modeling technology," Fingerhut contends. "WeatherWise has proven the superior capability of their models. By adding Risk Management to their fixed bill support services, they've created a sustainable advantage. If I were an energy company offering a fixed bill program to my customers, I would want support from someone who is willling to back their work with their own money.”

About WeatherWise USA, Inc.
WeatherWise USA, located in Pittsburgh, PA, is the premier provider of customized products for energy suppliers to offer their customers—including fixed bills, capped bills, energy efficiency reporting, and billing support services. WeatherWise’s unique use of computerized models based on engineering, rather than econometric, principles enables the development of products and services that reduce financial risk for energy providers and their residential and commercial consumers. WeatherWise is the only supplier of fixed bill products that can provide warranties of fixed bill program performance for programs offered in the United States and in Canada.

Posted by Industrial at 06:11 AM | Comments (0)

February 14, 2022

Howard Ballast Expands Product Offerings to Include Sign Ballasts

Howard Ballast Products to offer its customers Sign Ballasts

(PRWEB) February 14, 2022 -- Howard Ballast Products announced today that it has added Sign Ballasts to its vast selection of product offerings. With this addition, customers will now be able to purchase Magnetic Fluorescent Sign Ballasts, Electronic Fluorescent Sign Ballasts, and HID “F” Can Ballasts from the sole US-based ballast manufacturer, a division of Howard Industries®

“We are excited about these new offerings,” said Derral Ward, Howard Ballast Division’s Vice President of Sales, “and are confident that they will provide our customers with the same high-quality products that they’ve grown to trust from our Ballast Products Division.”

About Howard Ballast Products
Howard Industries Ballast Products is a division of Howard Industries, Inc., a diversified international manufacturing company headquartered in Laurel, Mississippi. With innovative products that include a variety of fluorescent and HID (High Intensity Discharge) ballasts and lighting components, it is an industry leader and the only ballast manufacturer with its manufacturing facilities located in the US. Like its sister divisions, Howard Transformers, Howard Computers, and Howard Medical Technologies, Howard Ballast Products is committed to manufacturing and providing superior products that meet or exceed the needs of its customers.

For more information, visit our website at www.Howard-Ballast.com or call us toll free at (800) 956-3456

Posted by Industrial at 04:29 AM | Comments (0)

February 06, 2022

My-Tronic's Numeric LED Display is Suited for Steam Baths or Special Environmental Conditions

Short Description my-display-406 Features

(PRWEB) February 2, 2022 -- Suited for environments where time, humidity, and temperature need to be measured under special environmental conditions, my-display-406 consists of water-resistant, 60 mm wall clock with DCF77 radio-controlled clock and temperature and humidity sensors. It can show time in 24 or 12 hr format, display temperatures in °C or °F, and control brightness of display. Device switches between temperature, humidity, and time in adjustable intervals from 1–99 sec.

My-LED, a branch of my-tronic GmbH, offers innovative LED displays. Based on the customers' requirements the company develops continuously new products. The my-display-406 is a 60mm wall clock (numeric LED display) for steam baths or for other environment where there is a need to measure time, humidity and temperature under special environmental conditions. The device is water resistant and has a DCF77 radio-controlled clock, temperature and humidity sensors. The my-display-406 series is a special line of products with a few special features, being able to show time in 24 or 12 hours format, to display temperatures either in Celsius or Fahrenheit and to control the brightness of the display depending on the ambient light so this way it is sure that no matter what light conditions are the displays will always have the optimal brightness. The device shows time, temperature and humidity, switching from one to the other in an interval adjustable between 1 and 99 seconds. There are two options for programming the device: DCF77 radio-controlled clock (included) or universal IR remote control. The housing was special designed for using under unspecific weather conditions. But the clock can be also used in conference rooms, industrial environment,as outdoor displays, for steam baths or swimming pools. Available colors: red, yellow, green, blue or white. The design makes the device attractive, and the colors are bright without being aggressive.

The company offers two years warranty for this line of products. Customized solutions are also available.

Mihaela Lica for my-tronic GmbH

Posted by Industrial at 11:07 AM | Comments (0)

February 03, 2022

Cheetah and No More Screw Brings a New Product to the Table

No More Screws announces their new lind of Cheetah Speed Systems. Debuted at the 2005 National Home Builders Show. You've never seen a screwless system quite like this one.

(PRWEB) February 3, 2022 -- No More Screws announces their new line of Cheetah Speed Systems. Debuted at the 2005 National Home Builders Show held in Orlando, Florida, Cheetah's Fortress Series featuring the Fortress Safety Strap was all the buzz among the show goes & exhibitors.

Safety matters. The Fortress Series epitomizes this philosophy. The Fortress Safety strap is molded into one solid piece on all the electrical devices. This sturdy guard raises the bar on safety. With Cheetah's innovative designs & premium quality materials, it ensures the product to offer a higher lever of safety to installers & homeowners. Even without a faceplate snapped on, the wider design protects even the littlest fingers from coming in contact with the electrical wires.

"No More Screws understands & appreciates the needs of electricians & homeowners alike,” said Roger Beckman, President of No More Screws. "By featuring Cheetah Speeds Systems & the new Fortress Series, this helps to reinforce the idea that safely & ease are essential to consumer satisfaction. Cheetah makes innovative, easy-to-use electrical devises that exceed the expectations of even the hardest to please costumers."

Installation is a snap!

No More Screws will continue to be your exclusive online dealer of the Cheetah Speed Systems. The new Fortress line is scheduled to hit the market in early April 2005.

www.NoMoreScrews.com
Place your order now to reserve your product.

Posted by Industrial at 11:09 AM | Comments (0)

February 02, 2022

New RCD Twin Sockets for Electrical Safety in the Home, Garden and Using Power Tools

Two new RCD safety sockets have been launched by Cudis, under the CPN brand. Designed in the UK to meet local conditions, the units offer class-leading quality, value and good margins for installers. They are available nationwide, via a growing network of over 80 local independent electrical wholesalers.

(PRWEB) February 2, 2022 -- The twin 13A sockets give protection for anyone operating 240v 50Hz power tools or garden equipment. Units have plastic face plates for domestic situations or have impact resisting metal enclosures for garage, utility or workshop use.

Safety is a critical issue and the units will trip in less than 40ms when the differential between live or neutral exceeds 30mA. Test and reset buttons enable performance to be verified. Units comply with BS7288 while design and manufacture takes place in ISO 9000 quality assured factories.

The units are easy to wire. The metal clad unit comes with its own enamelled steel back box to match the faceplate. This has knockout apertures for connection to electrical conduit. RCD Sockets are just part of the expanding CPN range of electrical systems from Cudis that are designed for safety, performance and value.

More information: Jan Meikle, Cudis, Tel. +44 (0)161 765 3004 Fax. +44 (0)161 763 1421 E-mail: e-mail protected from spam bots Web: www.cudis.co.uk

High/low resolution images are on the web at www.ainsmag.co.uk/cu221/3876cu1a.htm

Posted by Industrial at 11:06 AM | Comments (0)

Time Recorder Manufacturer - U-Need Technology Co

Highly specialized manufacturer for Electronic Time Recorder in Taiwan.

(PRWEB) February 2, 2022 -- Time Recorder Manufacturer - U-Need Technology Co. is highly specialized manufacturer for Electronic Time Recorder in Taiwan. We now are offering uniquely designed dot matrix printer time recorders / time stamping machine with competitive price worldwide. Our major markets are including all Asian countries, Central and South American, Middle East, Europe and some African countries. Along with our quality product and its superior performance we have earned very good reputation from all of our customers. Through our strong RandD and work team, the products can be applied to extensive end users, OEM and ODM are also acceptable for customer's demand. The entire machines meet CE standard. We are sure that you will be quite satisfied with our service and enjoyed with extent of our reliability.

At this moment, we are offering our UT series time recorder and seeking for a reliable agent to present our products. As we know that you are the one well know company in this filed, we take this chance to introduce you NEEDTEK 5000/7000 We are sure that you will be quite satisfied with our service and enjoyed with extent of our reliability.

Our Related Products:
time recorders & time clocks, time recorders, lcd/led displays & parts, typewriters & ribbons, sport scoreboards, MICRO COMPUTER TIME RECORDER, ELECTRONIC TIME RECORDER, MINI TIME RECORDER, SPORT TIMER, Electronic Time Recorder, time recorders, time clocks, Time Stamp, Electronic Checkwriter, Time Recorder Accessories, paper shredders , Time attendance Recorder, Time and attendance solution, Electronic Time Recorders, electromagnetic locks, magnetic locks, office equipment, time attendance clock, time clock, time recorder, checkwriter, sheddrer.

Article / Products ID:
Electronic Time Recorder : Electronic Time Recorder (UT-2000 Series) , Electronic Time Recorder (UT-3000 Series) , Electronic Time Recorder (UT-5000 Series) ,Electronic Time Clock (UT-6000 Series), Electronic Time Clock (UT-7000 Series) , Electronic Time Recorder (TM900)
Time Stamp : Time Stamp (16), Time Stamping Machine (17)
Electronic Time Recorder Accessories : Time Card (13), Card Rack (14) , Ribbon Cassette (15)
Paper Shredder : Paper Shredder (ST-206), Paper Shredder (S-800) , Paper Shredder (C-3500)
Electronic Checkwriter : Electronic Check Writer (MS-800), Electronic Check Writer (MS-900), Electronic Check Writer (MS-800N), Electronic Check Writer(MS-900N)

Contact Details:
CEO: Mr. Hua C.J.
Sales Contact: Manager Gary Chang
Address: 1F, No. 19, Sec. 3, Shrbin 1st Lane, Taichung Gang Rd., Taichung, 407, Taiwan
URL: http://www.3cmakers.com/Time_Recorder/needtek/
Tel: 886-4-24626355
Fax: 886-4-24635019

Posted by Industrial at 11:03 AM | Comments (0)

New Grounding Coupling Prevents Shaft Current from Damaging AC Motor Bearings

Aegis™ Shaft Grounding Coupling prevents electrical damage to bearings of AC motors by safely passing harmful shaft current to ground. The cleanroom-quality bearing isolation with dust-proof seal also protects against water spray.

MECHANIC FALLS, ME (PRWEB) February 2, 2022 -- The revolutionary new Aegis™ Shaft Grounding Coupling (SGC) from Electro Static Technology prevents electrical damage to bearings of AC motors by safely passing harmful shaft current to ground. Extremely effective yet low-cost, the Aegis coupling provides an ultra-low impedance path from shaft to frame, allowing current induced by variable frequency drives (VFDs) to pass to ground without damaging motor bearings or the bearing race.

When variable frequency drives are used with AC motors, current is induced along the motor shaft. When it overcomes the resistance of the grease, this current discharges through the motor bearings causing frosting, pitting, fluting, and fusion craters which can lead to premature motor failure. With its patent-pending Electron Transport Technology™, the Aegis coupling solves this problem by providing a “virtual short” between the shaft and motor frame that keeps shaft current and voltage from building up in the first place. Easily installed and maintenance free, the Aegis coupling is a reliable, low-cost alternative to less effective mitigation schemes such as brushes.

In addition to eliminating damaging shaft current, the Aegis SGC provides cleanroom-quality bearing isolation with a dustproof seal that also protects against water spray. Developed initially for 5 to 15 HP NEMA motors (the largest installed base of motor/drive applications), the Aegis SGC is ideal for HVAC, cleanroom, petrochemical, manufacturing, transportation, and other applications where VFDs are used. Additional sizes will be available in the immediate future.

Electro Static Technology is a global leader in the elimination and/or mitigation of induced electrical charges. Other products include FLX-P™ flexible peel-and-stick passive static eliminators for printers, copiers, and other imaging devices. Electro Static Technology is a division of Illinois Tool Works (ITW), a $10 billion multinational conglomerate operating in 44 countries.

For more information, contact: Adam Willwerth, Sales and Marketing Manager, Electro Static Technology, 31 Winterbrook Road, Mechanic Falls, ME 04256, Toll-Free: 1-866-738-1857, TEL: (207) 998-3493, FAX: (207) 998-5143, e-mail protected from spam bots, www.est-aegis.com

Posted by Industrial at 11:01 AM | Comments (0)

February 01, 2022

Fuji Novel Batteries Actively Seeks Additional Retail Partners

Internationally-Known Battery Manufacturer Announces New Emphasis on Markets in the Americas
Fuji Novel Batteries, one of the largest manufacturers of batteries for portable electronics and digital cameras worldwide, announces a new emphasis on markets throughout the Americas, with an overall goal of significantly boosting its retail presence for the Fuji Novel line of high-performance line of Super Alkaline, Lithium Photo, Lithium Coin Cell and Button Cell, as well as Super Heavy Duty batteries. As a part of this effort, Fuji Novel is actively seeking new and additional retail partners to take on the Fuji Novel-branded line.

(PRWEB) February 1, 2022 -- Fuji Novel Batteries, one of the largest manufacturers of batteries for portable electronics and digital cameras worldwide, announces a new emphasis on markets throughout the Americas, with an overall goal of significantly boosting its retail presence for the Fuji Novel line of high-performance line of Super Alkaline, Lithium Photo, Lithium Coin Cell and Button Cell, as well as Super Heavy Duty batteries. As a part of this effort, Fuji Novel is actively seeking new and additional retail partners to take on the Fuji Novel-branded line.

“Fuji Novel batteries are known throughout the world for their superior performance characteristics,” notes Russ Bongiorno, Vice President of Marketing at Fuji Novel Batteries. “Until recently our retail penetration in the United States and throughout the Americas has been somewhat limited. However, we are committed to change that fact by introducing retailers to the benefits of stocking the Fuji Novel line.”

One of the benefits that Bongiorno plans to educate retailers about is the opportunity to make significantly higher profit margins versus the two nationally advertised battery brands. “Once retailers see that they can place Fuji Novel batteries either side-by-side, or within proximity of one of the leading national brands, and that a significant number customers will choose Fuji Novel, they are sure to stock a number of our SKUs,” said Bongiorno.

Bongiorno further explains, “As consumers’ brand loyalties migrate from product loyalty to destination loyalty, retailers large and small are commanding stronger and stronger customer loyalty. With this migration comes an increased consumer willingness to choose among several different brands – creating significant inroads for retailers who offer a choice in well-positioned name brands such as Fuji Novel – brands that can earn them additional profits.”

In addition to the opportunity to make additional profits and higher margins, Fuji Novel will also provide retailers who take on the line with a variety of merchandising opportunities and promotional incentives, including advertising and public relations money and support. “We have a reputation for tailoring just the right promotional incentives to suit the particular market segment in which the retailer operates,” notes Bongiorno.

Worldwide demand for the batteries that power so many of the devices that we seem to take for granted – from personal digital assistants to digital cameras to CD players – is seemingly endless. In fact, industry analysts put North American demand for disposable Alkaline batteries at almost $4 billion annually. As this hotly-contested category continues to heat up, retailers have a tremendous opportunity to choose suppliers that can help them to boost profits and build margins.

“In the highly competitive, device driven battery business, it makes sense for retailers to carry a second – or even a third – branded line, in addition to one of the national leaders, which can be a lower cost, higher margin alternative,” says Bongiorno.

All Fuji Novel Alkaline batteries offer superior performance characteristics. Today's portable consumer electronic products like digital cameras and MP3 players are more sophisticated and require more power. As today's high-tech handheld electronics incorporate higher-speed digital processing, their hunger for battery power grows dramatically. Therefore the demands on portable power sources, especially Alkaline batteries, are skyrocketing.

State-of-the-art techniques and materials enable Fuji Novel to produce batteries of the highest quality and longest life to meet the needs of today’s consumer electronic devices. Through the use of an innovative technology that incorporates an advanced cathode material with more electrolytes in its Alkaline batteries, Fuji Novel ushered in a new era of high performance portable power. In fact, recent independent tests conducted by the ACTS Testing Laboratory, showed that Fuji Novel AA batteries either matched or outlasted more recognized battery brands.

Fuji Novel meets the highest manufacturing standards, ensuring superior product performance worldwide. All Fuji Novel batteries undergo rigorous quality control tests that ensure exceptional operation and superior consistency, providing outstanding value for consumers every hour of every day in a myriad of portable power uses all over the world.

For over 50 years, Fuji Novel Batteries has been recognized as a market leader and innovator in the hyper-competitive battery industry. Fuji Novel pioneered the launch of Carbon Zinc battery technology in 1950, and was first to develop and market a line of Manganese batteries, launching the product line in 1969. An environmentally-conscious company, Fuji Novel was the first battery manufacturer to produce 100% Mercury Free Formula and Cadmium-free batteries. Fuji Novel manufacturers and markets batteries under its own internationally-recognized brand, and is the leading manufacturer of private-label batteries worldwide.

Fuji Novel batteries are available in a wide variety of SKUs, and include a full range of lithium, Alkaline and Super Heavy Duty dry cells.

For more information about Fuji Novel Batteries, visit their Website at www.fujinovelbatteries.com, or in North America, call toll free at 800-224-3854.

Media Contact:
John Lonsdorf
R&J; Public Relations
(973) 331-1070

Posted by Industrial at 10:56 AM | Comments (0)

January 31, 2022

WeatherWise USA Announces Completion of Recapitalization

Company Poised to Double Revenues and Introduce Innovations
WeatherWise USA, Inc. announces the completion of its 15 month recapitalization. The recapitalization solidifies the company’s balance sheet and gives it the flexibility to respond to new opportunities.

Pittsburgh, PA (PRWEB) January 31, 2022 -- WeatherWise USA, Inc. announces the completion of its 15 month recapitalization. According to Board member and investor, Andrew Senchak of Keefe, Bruyette, & Woods, “This recapitalization solidifies the company’s balance sheet and gives it the flexibility to respond to new opportunities. The company is profitable with positive cash flows.” WeatherWise CEO Rand Warsaw adds “We are delighted to have business booked through 2008 and expect to increase our revenues significantly in the next two years.”

WeatherWise USA plans to continue growing its customer base for the electric and gas fixed bill products that are based on proprietary computer modeling. The strengthened balance sheet also enables the company to leverage its skills in applying risk management and financial engineering to new energy services and products. “This turnaround positions us to build on our core strengths in fixed bill product services for utility markets and to provide unparalleled innovative services to new and existing markets,” Vijay Parmar, VP of Financial Technology, explains. WeatherWise expects to offer new products in weather market technology, utility financial management, and electric and gas hedging markets and is poised to commercialize techniques previously developed for in-house use, such as a specialized computer language for database interrogation.

About WeatherWise USA, Inc.:
WeatherWise, USA, located in Pittsburgh, PA, is the premier provider of customized products for energy suppliers to offer their customers—including fixed bills, capped bills, energy efficiency reporting, and billing support services. WeatherWise’s unique use of computerized models based on engineering, rather than econometric, principles enables the development of products and services that reduce weather-related financial risk for energy providers and their residential and commercial consumers.

Posted by Industrial at 10:51 AM | Comments (0)

January 23, 2022

EIG Announces On-Line Historical Trending to the Nexus Series P60N LCD Display Replacing Substation Chart Recorders

Electro Industries/GaugeTech announces new features to the Nexus Series P60N LCD Display. This technologically leading display offers a user-friendly touch screen environment with new features such as On-Line historical trending. The P60N touch screen HMI display provides real time readings, harmonics, waveforms and phasors from Nexus series power meters.

Westbury, NY (PRWEB) January 23, 2022 -- Electro Industries/GaugeTech announces new On-Line historical trending to its P60N touch screen HMI display for the Nexus series meters. This allows the display to be used for chart recording applications like monitoring Voltage over time, Current over time, Power or Frequency. Using this technology, substation operators get traditional Chart recorded data in real time on a graphical touch-screen LCD display without having to install separate equipment. The Nexus and its displays are ideal for Substation Automation applications. Electro Industries manufacturers a comprehensive line of substation grade power metering and control equipment.

Additional Advanced Features Include:
·Large 320 x 240 pixel display
·Extra bright cold-cathode fluorescent display
·NEMA 4 Rated
·View Multiple Meters with One display
·EN50160 Flicker Screens
·Harmonic Spectrum Presentation
·View Out of Limit Alarms

For more information, contact:
Electro Industries / GaugeTech
Attention: Andrew Kagan, National Sales Manager
1800 Shames Drive
Westbury, NY 11590

Tel (516) 334-0870
Fax (516) 338-4741

Posted by Industrial at 10:35 AM | Comments (0)

January 19, 2022

Extension Module & Curved Covers for DIN Rail Enclosures from Camden Electronics

Camden Electronics has introduced a new extended height module and curved cover options for its range of DIN rail mounting enclosures.

(PRWEB) January 19, 2022 -- Camden Electronics has introduced a new extended height module and curved cover options for its range of DIN rail mounting enclosures.

The new extension module adds 15mm to the height of the original enclosure and enables two additional PCBs to be mounted horizontally. It simply snap fits to the top of existing enclosures enabling additional space to accommodate larger components and sub-assemblies where necessary. Like the original enclosures, the new extension module is moulded from Lexan polycarbonate to ensure the finished moulding fully meets UL94V0 flame retardancy ratings.

The new curved covers are designed to provide improved aesthetic appeal for the enclosures and offer an enhanced look that allows customers to deliver their systems in housings that appear to be custom designed rather than a standard box from any supplier. They are available in solid grey, clear, red transparent and smoky grey transparent. The design allows the hinged lid to be locked in the opened position so adjustments can be made to circuits within the enclosure without having to hold the cover.

Like their flat counterparts, the new curved covers can be supplied with or without a small hole that enables units to be sealed with wire, preventing unauthorised tampering with circuitry.

Camden's UK-manufactured snap-fit DIN rail enclosures sport a wide variety of features allowing users to produce housings to meet almost any conceivable requirement.

Unlike competitive products, Camden’s patented DIN rail mounting enclosures are fully UL94V0 flame retardant as they are moulded in polycarbonate instead of Noryl and other lower grade materials. Seven versions are available offering lengths of 17.5, 36, 53, 71, 89, 106 and 160mm all 90mm wide.

Offering greater versatility, Camden’s design features PCB guides to ensure boards are held in place firmly and moulded screw holes in the base to facilitate mounting of PCBs with heavier components such as relays or transformers. Up to three PCBs can be mounted horizontally while there are four mounting positions for vertical boards. The extension module adds two further horizontal positions.

The enclosure base is fully sealed with none of the holes that are found on competing products avoiding the need for any insulating pads and reducing assembly costs for users. The design of the enclosure is such that all tabs on the body have been eliminated to avoid small lugs that might break off.

Standard colour is grey (RAL 7035) although Camden can supply mouldings in black, green, red or blue for volume orders. In addition, the company can incorporate ventilation slots in its tooling for volume customers to avoid the need for machining by the end user. Besides reducing costs for the end user this facility also results in a stronger moulding compared to a similar enclosure with machined ventilation slots.

The new curved covers complement the original range of standard snap-in panel covers available in grey, transparent red or clear. Enclosures can optionally be supplied with a moulded top panel that can be screen printed also enabling transparent red or clear snap-in panels to be mounted with a label underneath for example.

Additional special features include snap-on terminal covers to IP20 finger protection with perforated screwdriver and wire entry holes and tabs as standard and spring loaded DIN rail clips that can be snapped open to allow chassis/surface mounting. Camden can also supply an optional adaptor for G-rail mounting. Terminal covers, snap-in panels and curved covers can also be provided to customer specifications for volume orders. Other optional special features include alternative black higher rated RTI material and EMC shielded metallic coated boxes.

Camden Electronics Ltd., based at St. Albans, Hertfordshire, UK, is a leading manufacturer & supplier of PCB terminal blocks, fuses & fuseholders, sealed lead acid batteries, LEDs, miniature switches, interface modules, enclosures, IC & PLCC sockets and relay bases for the electronics, telecommunications, lighting, and electrical industries. The company has ISO 9002 accreditation and exports a significant proportion of its production to Europe and the Far East.

Information from Camden Electronics Ltd., 15 Porters Wood, Valley Road Industrial Estate, St. Albans, Hertfordshire, AL3 6PQ, England. Tel.: +44 (0)1727 864437 Fax: +44 (0)1727 855400.
Web site: http://www.camdenelec.com

Press information from: Tim Jennings, Marshall Jennings PR Ltd, Wyvols Court, Swallowfield, Reading, Berkshire, RG7 1WY, England. Tel: +44 (0)118 988 0288 Fax: +44 (0)118 988 0388.
Web site: http://www.mjpr.com

Posted by Industrial at 10:25 AM | Comments (0)