Electronics Manufacturing News

« August 2005 | Main | October 2005 »

September 30, 2005

RedRose Mobile Phones Forum Giving Away Motorola V3 and Special Edition Bluetooth Headset in October

RedRose Mobile Phones Forum is giving away a brand new, super-sexy flip-phone and bluetooth headset worth over $400 to the forum member considered most useful and helpful in October.

(PRWEB) September 30, 2005 -- RedRose Mobile Phones Forum has been giving away cell phones and Prepay SIM cards to its deserving members ever since it began but this month they have decided to go one better. In October, the forum member considered most helpful and useful in October will be sent a Motorola V3 Razr (SIM Free) and Special Edition Motorola Bluetooth Headset absolutely free and it is open to members throughout the world!

A 24 Hour Mobile Phone News Service and Discussion Forum combining Mobile Phone Reviews and Articles you can find the forum at www.redrosemobilephones.co.uk/e and signing up to start joining in the fun is completely free. In fact, RedRose is a totally free service dedicated to expanding its mobile/cell phone community worldwide and increasing knowledge of mobile technology and applications through it's member's input. Every new member who joins up and gets posting receives a free prepay SIM card or can opt to have £1 donated to Oxfam, WWF, Amnesty International or Red Cross instead. The same also applies to the daily SIM card giveaway where the most useful forum member for the day can claim a free prepay SIM card to be sent out to them or opt to donate to charity instead!

Fun, friendly and free - all they ask is that you add to the common knowledge and contribute to the mobile technology community!

For more information, visit http://www.redrosemobilephones.co.uk/e/news.php

Posted by Industrial-Manufacturing at 02:16 AM | Comments (0)

Amphenol Industrial Operations has Introduced a New Line of Explosion-proof Cable Glands Designed to Provide Watertight Sealing Capabilities

Amphenol Industrial Operations, a manufacturer of high reliability connectors and interconnection systems for the industrial markets, has introduced a new line of explosion-proof cable glands designed to provide watertight sealing capabilities where a cable passes through bulkheads or enters electrical equipment and junction boxes.

Sidney, NY (PRWEB) September 30, 2005 -- Amphenol Industrial Operations, a manufacturer of high reliability connectors and interconnection systems for the industrial markets, has introduced a new line of explosion-proof cable glands designed to provide watertight sealing capabilities where a cable passes through bulkheads or enters electrical equipment and junction boxes.

The new EX Cable Glands are ideal for a wide variety of indoor and outdoor applications, including oil and gas exploration, production platforms, pharmaceutical, chemical and paint manufacturing, and machine and heavy equipment. In addition, the cable glands provide grounding, bonding, and insulation capabilities, as well as strain relief at the electrical connection.

EX Cable Glands accept any type of cable, including armor-braided cable. With a standard seal, they are rated for operating temperatures from -20°C to +85°C (-4°F to +185°F); with a silicone seal, for -60°C to +180°C (-76°F to 356°F). The glands have an impact rating of at least 7Nm. The cable glands are available in brass or stainless steel and in gland sizes from 16 to 100, incorporating metric thread sizes from M20 to M100x2 as well as NPT (national pipe thread) sizes from 1/2" through 4".

The new line of cable glands are ATEX approved for Zone 1 and Zone 2 applications, IEC-rated up to IP68 (resistant to continuous immersion in water) and NEMA-rated 4X (resistant to powerful water jets). In addition, they are approved by the CSA (Canadian Standards Association).

EX Cable Glands can also be used with Amphenol’s Starline EX connector product line for explosion-proof interconnect solutions. A complete range of accessories is available, including locknuts, earth tags and washers.

Pricing for EX Cable Glands starts at $10 per unit. Delivery is four to six weeks ARO.

For more information, please contact Robert Fralicker, Product Manager, Amphenol Industrial Operations, Amphenol Corporation, 40-60 Delaware Ave, Sidney, NY, 13838-1395. Tel: 607-563-5124; Fax: 607/563-5157;

READER SERVICE INQUIRIES: Please forward all reader service inquiries to Judy Ogden at Amphenol Industrial Operations, Amphenol Corporation, 40-60 Delaware Ave, Sidney, NY, 13838-1395.

EDITOR’S NOTE: Amphenol Industrial Operations, headquartered in a 675,000 square foot facility in Sidney, NY, provides a full range of high reliability connectors and interconnection systems specifically for the industrial markets including base stations, rail/mass transit, process control, automotive manufacturing, heavy equipment, and petrochemical/power generation. Products include ruggedized-for-industry cylindrical, fiber optic, rectangular, and industrialized versions of Amphenol’s MIL-C-5015 cylindrical, MIL-C-26482 miniature cylindrical and GT reverse bayonet cylindrical connectors. It employs more than 1,400 people and is both ISO9001 and MIL-STD-790 certified. Amphenol Industrial Operations is a division of Amphenol Corporation, Wallingford, CT, one of the largest manufacturers of interconnect products in the world, with year 2004 sales topping $1.5 billion.

Posted by Industrial-Manufacturing at 02:15 AM | Comments (0)

Aitech Systems Ltd. Announced that it has Received the First Production Order from the LAHAV Division of IAI (Israel Aircraft Industries) for Display & Mission Computers

Aitech Systems Ltd., a world leader in the development and manufacture of board and subsystem level products for harsh environment defense, aerospace and space applications, announced that it has received the first production order from the LAHAV Division of IAI (Israel Aircraft Industries) for Display & Mission Computers.

Chatsworth (PRWEB) September 30, 2005 -- Aitech Systems Ltd., a world leader in the development and manufacture of board and subsystem level products for harsh environment defense, aerospace and space applications, announced that it has received the first production order from the LAHAV Division of IAI (Israel Aircraft Industries) for Display & Mission Computers.

These will drive the state-of-the-art, glass cockpit avionics of the Indian Advanced Light Helicopter Program (ALH). IAI/LAHAV is the prime contractor for the avionics development of the ALH program.

Under this contract for the first order of 32 computer units, Aitech will provide IAI fully COTS and open-systems architecture compliant, integrated and tested Display & Mission Computer systems, with initial units being delivered at the end of the year. All deliveries for the first production order will be completed by May 2006. Aitech will build 400 Display & Mission Computers for the ALH program, to be delivered over the next several years. In addition, Aitech is under contract to IAI to provide the next generation of Display & Mission Computers for the IAI LAHAV Division’s avionics upgrade programs.

This advanced avionics Display & Mission Computer represents a mutual design between IAI/LAHAV and Aitech.

The Display & Mission Computer was designed to run the display and mission management software developed by IAI LAHAV and is DO-178B compliant. It includes state-of-the-art processor, memory, I/O and quad-head graphics boards packed in a light-weight 1 ATR Short enclosure with a sophisticated MIL-STD-704 compliant power supply.

The computer is capable of driving four digital (DVI) Multi-Function Displays (MFD) simultaneously, displaying high-resolution synthetic graphics with instrumentation, navigation and mission data, as well as multiple sources of video. The full-featured graphics/video subsystem supports many different configurations and protocols in addition to input and display options and formats, thus providing IAI LAHAV the best performance and maximum flexibility to implement next generation glass cockpit systems.

The Display & Mission Computer also includes a large array of communication interfaces, including MIL-STD-1553, ARINC 429, Fast Ethernet, USB (for external removable mass storage devices), high speed RS-422/485/232 serial I/O, high quality audio, as well as support for ARINC 708 weather radar equipment. A large number of digital and analog (A/D, D/A) input and output lines used to read and control different sensors are also integrated in the computer.

The Display & Mission Computer was designed using a modular approach based on the VMEbus open architecture providing the path for future growth, expansion and additional enhancements. In its present configuration, the computer has provisions for internal and external mass-storage devices and an optional digital map subsystem.

For additional information about Aitech’s products and capabilities, please call 888-248-3248

About Aitech
Established in 1983, Aitech offers military and space-qualified, commercial off-the-shelf (COTS) products for defense, aerospace and space applications, radiation tolerant and MIL-SPEC solutions; providing VMEbus and CompactPCI boards, power subsystems, mass memory, enclosures and hardware subsystem integration along with configuration and component obsolescence management services. In addition, Aitech utilizes its broad base of off-the-shelf products and technologies to develop customer-specific solutions, deliver superior cost-performance and reliability, and expedite time to market. Applications for its products range from mission processors, fire control and mission control subsystems for ground vehicles, surface and subsurface naval platforms, tactical and strategic fixed- and rotary-wing aircraft, and low to high earth orbit space vehicles.

Posted by Industrial-Manufacturing at 02:14 AM | Comments (0)

Schaffner EMC, Has Just Published a New Short Form Catalog Detailing its Complete Line of Filters, Chokes, Feedthrough Components and Pulse Transformers

Schaffner EMC, a leading provider of EMI/RFI components, EMC instrumentation and test systems, has just published a new short form catalog detailing its complete line of filters, chokes, feedthrough components and pulse transformers.

Edison, NJ, September 2005 (PRWEB) September 30, 2005 -- Schaffner EMC, a leading provider of EMI/RFI components, EMC instrumentation and test systems, has just published a new short form catalog detailing its complete line of filters, chokes, feedthrough components and pulse transformers.

The 12-page catalog outlines a wide range of components, including feedthrough components (capacitors and filters), PCB filters, IEC inlet filters, single-phase filters for chassis mounting, three-phase filters and line reactors, three-phase and neutral line filters, output filters and load reactors for motor drives, RFI suppression chokes and pulse transformers. Detailed charts for each include maximum voltage, features and typical applications.

The catalog also includes a product selection chart and an application chart for industries including automotive, process automation, consumer goods, medical, military, power generation and telecommunications, among others. The short form describes Schaffner’s EMC testing and engineering services as well. Worldwide contact information for Schaffner EMC headquarters and offices are also listed.

To receive a copy of the catalog, please contact MaryJane Salvador, Schaffner EMC, Inc., 52 Mayfield Avenue, Edison, NJ 08837. Tel: (732) 225-9533 ext.239;
Fax: (732) 225-4789; E-mail: e-mail protected from spam bots. Web: www.schaffnerusa.com.

READER SERVICE INQUIRIES: Please forward all reader service inquiries to MaryJane Salvador, Schaffner EMC, Inc., 52 Mayfield Avenue, Edison, NJ 08837.

EDITOR’S NOTE: Schaffner EMC, Inc., provides the world’s largest range of EMI components, EMC instrumentation and test systems for radiated and conducted interference, and advanced power supply test systems.

Posted by Industrial-Manufacturing at 02:13 AM | Comments (0)

Aries Electronics, Inc., has introduced two new Correct-A-Chip™ adapters.

Aries Electronics, Inc., an international manufacturer of standard, programmed and custom interconnection products, has introduced two new Correct-A-Chip™ adapters that permit the use of SOIC (small outline integrated circuit) D package 150 mil body chips to be used on boards designed for SOIC DW package 300 mil body chips and vice-versa.

Frenchtown, NJ (PRWEB) September 30, 2005 -- Aries Electronics, Inc., an international manufacturer of standard, programmed and custom interconnection products, has introduced two new Correct-A-Chip™ adapters that permit the use of SOIC (small outline integrated circuit) D package 150 mil body chips to be used on boards designed for SOIC DW package 300 mil body chips and vice-versa.

The new series 666000 adapters accept narrow-body SOIC D package devices while mounting on boards designed for wide-body SOIC DW package footprints. Series 665000 adapters accept wide-body SOIC DW package devices while mounting on boards designed for narrow-body SOIC D package footprints.

Both designs are available in pin counts from eight through 24 pins, and are constructed of .062 inch (1.56 mm) FR-4 boards manufactured to IPC-600E Class 2 standards. The FR-4 material is glass filled and UL94V-0 rated, with one ounce of copper traces. The male pins are brass with 200 µ” tin over nickel plating.

All Aries Correct-A-Chip™ adapters are manufactured and inspected using IPC-610B Class 2 guidelines and are available in custom materials, platings, sizes and configurations to suit specific customer applications.

Pricing for a 24-pin adapter starts at $7.25 per unit in quantities of 100. Delivery is stock to four weeks ARO.

For additional information, contact Aries Electronics, Inc., P.O. Box 130, Frenchtown,
NJ 08825. Tel: 908/996-6841; Fax: 908/996-3891;
Web: www.arieselec.com, Data sheets #18044 and 18055 — http://www.arieselec.com/products/18044.pdf and http://www.arieselec.com/products/18045.pdf
Europe contact Tel: +44 870 240 0249; Email: e-mail protected from spam bots.

READER SERVICE INQUIRIES: Please forward all reader service inquiries to Frank Folmsbee, Aries Electronics, Inc., P.O. Box 130, Frenchtown, NJ 08825.

EDITORS NOTE: Headquartered in Frenchtown, NJ, Aries Electronics, Inc., manufactures an extremely broad range of custom and standard interconnection and packaging products for electronics. Industry leading products include Zero Insertion Force (ZIF) test sockets for DIP, PGA, PLCC and SOIC devices; the Correct-A-Chip™ product line of "intelligent connectors"; adapters and connectors; several patented concepts for BGA (ball grid array) and LGA (land grid array) sockets; and an extensive array of high frequency test and burn in sockets. The company also specializes in meeting custom requirements for its customers.A

Contact: Rebecca Simon or
Beth Smith, 215/453-8700

Posted by Industrial-Manufacturing at 02:12 AM | Comments (0)

September 29, 2005

Rave Wireless Announces Launch of New Service that Increases Usefulness of Mobile Phones in Our Lives

Universities and their students are first to benefit from service that enables the next generation mobile lifestyle.

New York, NY (PRWEB via PR Web Direct) September 29, 2005 -- Rave Wireless Inc. (www.ravewireless.com), the leading enabler of the next generation mobile lifestyle, today announces the launch of its Rave Service, initially targeted to universities and their students. This first-of-its-kind service increases the usefulness and relevance of mobile phones. Right from their phone, Rave users can easily personalize and share a world of information from timely traditional online media, to user- and community-generated content, all of which can be location-sensitive.

“The mobile phone is the first device since the key that everyone carries with them and yet its potential to empower people to connect to the world around them is vastly underutilized,” says Rave Wireless CEO Rodger Desai. “Luckily, today's youth provide a glimpse of the future. Rave enables the next generation mobile lifestyle by providing users with an easy way to bring together personally relevant information that can help them plan their day and keep connected to their communities.”

Rave is the result of intensive research by wireless and internet industry veterans into mobile phone usage by today's youth. “The movement towards personalization, self-expression and community has until now not been realized on mobile phones,” says Shikhar Ghosh, chairman, Rave Wireless. “Our research affirmed that today's highly mobile youth want instant access to local and timely information that supports their fluid lifestyle, whether from blogs, publicly available RSS feeds, or community-centric sources, as well as an easy way to express themselves within their communities. Rave is the first to meet this need.”

Rave is available on a monthly subscription basis and can be accessed and managed online at www.getRave.com. Rave Wireless's first customers are universities from around the U.S. that have purchased access for their students. The universities are utilizing Rave to facilitate more effective communication with students, strengthen relationships, increase utilization of university tools and services, and enhance safety.

New Jersey-based Montclair State University is currently conducting the first school-wide rollout of the service, while seven other universities are following Montclair's lead over the next several months, including Baruch College of the City University of New York and the University of South Florida. Some of the first university-focused channels on Rave include: tracking the exact location of Montclair State's campus transportation vehicles; in-class and remote interactive polling; daily information from community establishments about local restaurant specials and events; instant access to real-time library and school resource availability; and more.

About Rave Wireless, Inc.

Rave Wireless is the leading enabler of the next generation mobile lifestyle. Rave increases the usefulness of mobile phones by making it easy to personalize, create, and share traditional online media, user- and community-generated content, and location-based information. Led by a world-class team, Rave Wireless is headquartered in New York, NY and maintains an office in Cambridge, MA. For more information, please visit www.ravewireless.com.

Media Contacts:

Lynn Schwartz
Rave Wireless Public Relations Representative
973-736-7118

Todd Piett
Rave Wireless, Inc.
212-337-9828

Posted by Industrial-Manufacturing at 01:36 AM | Comments (0)

VoIPSupply.com Launches CanadianVoIPStore.com

VoIPSupply.com, the leading provider of IP telephony products, software and services, launched CandadianVoIPStore.com, which offers Canadians the widest selection of VoIP products and services in the industry, as well as the convenience of pricing in Canadian dollars, rather than using currency conversion calculators.

BUFFALO, NY (PRWEB) September 29, 2005 -- VoIPSupply.com, the leading provider of IP telephony products, software and services, today announced the launch of CandadianVoIPStore.com (www.canadianvoipstore.com). The new site provides Canadian customers the convenience of pricing in Canadian dollars, rather than using currency conversion calculators.

CanadianVoIPStore.com will provide customers with distinct advantages:
- Widest product breadth, with 1,000 SKUs from every major VoIP manufacturer
- Live call center with trained sales engineers
- Canadian owner who understands Canada's unique business culture

In addition, CanadianVoIPStore.com will soon begin shipments from a Canadian warehouse location to expedite shipping and reduce shipping costs.

Benjamin P. Sayers, CEO of CanadianVoIPStore.com and a native of Kingston, Ontario, said that a Canadian perspective is important to understanding the value Canadians place on customer service.

“VoIPSupply.com has earned a loyal base of Canadian customers because we have a high level of customer care and an expansive product offering,” said Sayers. “CanadianVoIPStore.com will continue to offer extended sales hours, logistical support and provisioning, but with the added benefit of pricing in Canadian dollars and fast in-country shipping.”

About CanadianVoIPStore.com:
CanadianVoIPStore.com (www.canadianvoipstore.com) is a division of VoIPSupply.com (www.voipsupply.com), the largest single source for Voice over IP products and service. In addition to a comprehensive selection of IP phones, networking equipment and software platforms, the company offers provisioning and fulfillment, custom configuration, technical support, extended warranties and logistical services for end-to-end customer solutions. For additional information on VoIPSupply.com, CanadianVoIPStore.com or to schedule an interview with CEO Benjamin P. Sayers, please contact Christopher D. Greene at 716.250.3886.

Posted by Industrial-Manufacturing at 01:35 AM | Comments (0)

Smoking Cessation Devices Help Smokers Beat the Addiction

These keychain-sized, battery operated behavior modification tools can gradually wean smokers from the cigarette habit, making it easy to quit smoking.

(PRWEB) September 29, 2005 -- Some ex-smokers report that you can effectively alleviate the irritable effects of nicotine withdrawal by using smoking cessation devices. One such device is called the 'Linkman habit reversal tool', released early 2005 by Brady Development, Inc. in Avon, CT.

This battery-powered product can be worn as a pendant or carried on a keychain, and it's shaped like a small cigarette, so you can fidget with it while you're quitting smoking.

It's simple to use, and the logic is dead on. To use the Linkman, you double-click a clear button on one end to request permission to smoke. If you haven't waited long enough between cigarettes (10 minutes to start), this button blinks red, letting you know to fight the urge to smoke for a little while longer. There is no penalty for asking too early – the device simply says “not yet” with short red flashes.

If you double-click the button after waiting long enough, you get a solid green light. This is the device's way of granting you permission to smoke one cigarette. For each cigarette, this cycle repeats with a slightly longer waiting period. In this way, the device weans you gradually and systematically, allowing you to quit smoking within a few months of use.

“It was the only way for me to quit,” says JB Snyder, inventor. “I had tried everything. Nicotine gum kept me addicted to nicotine, and 'cold turkey' had me irritable even after 10 months. I was impossible to be around, so I started smoking again. Not so with the Linkman.”
"Of course it can't make you quit," says Snyder. "But if you want to quit, smoking cessation devices can help you fight your addiction like no other products can."

Made in the U.S.A. and patent-pending, the Linkman can be purchased on the World Wide Web at www.linkman.com. Price: $80. For more information, contact Brady Development, Inc. at PO Box 1465, Avon, CT 06001. Phone (860) 460-7289; Fax (309) 419-6494.

Posted by Industrial-Manufacturing at 01:35 AM | Comments (0)

Integre Technologies Announces PCIExpress™ Verification Services

Integre Technologies a leading provider of ASIC design and verification services today announced their PCIExpress™ verification service. This service is targeted to organizations developing products with the PCIExpress interface.

(PRWEB) September 29, 2005 -- Integre Technologies a leading provider of ASIC design and verification services today announced their PCIExpress™ verification service. This service is targeted to organizations developing products with the PCIExpress interface.

“Our project experience allows us to avoid the pitfalls and risks of various tools and environments” states Mark Blejwas Integre Managing Partner. Whether we are engaged at the outset of the project or brought into an existing effort, our understanding of the intricacies of the PCIe™ architecture and the verification flow can save months of effort for a customer translating into a significant savings in budget without sacrificing quality.”

PCI Express is a robust, scalable, flexible, cost-effective I/O interconnect that provides a significant increase in available bandwidth (500 MBps per lane -- dual-simplex) without requiring the system integrator to use more expensive PCB materials or to add layers to accommodate wider parallel buses. Each PCI Express lane supports 2.5 Gbps in each direction and can scale to support as many as 32 lanes in a single link. Low-cost platforms can now provide enough bandwidth in the I/O backbone to support applications like SATA, Gigabit/10-Gbit Ethernet and 1394b.

The Integre team is experienced with assembling and executing a PCIExpress verification environment utilizing the latest proven techniques and most reliable models. Key verification tasks include; Recommending the proper split of directed versus randomized tests, assembling a comprehensive yet efficient test suites and developing efficient verification test.

About Integre
Integre Technologies is a design services company providing full turn-key and project augmentation support in the ASIC and electronic system design disciplines. Integre’s capabilities include: FPGA and ASIC design and verification including multi-million gate SOC's, Analog/RF ASIC Design, Mixed Signal ASIC Design and Circuit Board Design. Integre is headquartered in Rochester, New York. For more information on Integre please visit our web site at www.integretek.com.

PCI Express and PCIe are trademarks of PCI-SIG.

Posted by Industrial-Manufacturing at 01:34 AM | Comments (0)

From Aircraft Aerodynamics to Improved Heart Implants

At first glance airplane wings and human hearts have little in common, but, say a team of European researchers, a technology used to measure airflow over wings can now be used to help keep hearts in working order.

(PRWEB) September 29, 2005 -- The researchers optimised a Particle Image Velocimetry (PIV) system traditionally used to improve the aerodynamics of aircraft wings to make it capable of accurately measuring the effects of medical implants on blood flow. Their work will allow medical device manufacturers to improve the design of devices such as heart valves and pumps, and provide doctors with a way to detect – and ultimately correct - the side-effects that commonly afflict patients who receive implants.

“This system could revolutionise heart treatments,” says Fabrizio Lagasco, coordinator of the SMART-PIV project.

The SMART-PIV system - which combines the optimised PIV hardware with advanced image processing and numerical analysis software over a parallel computing subsystem - fills a gap in the heart device sector that has limited the efficiency of implants.

Though ultrasound scans allow doctors to view potential problems with the natural heart, as well as locally in the circulatory system, they fall short of providing a detailed analysis of the causes of problems related to blood flow when modified by artificial implanted devices. In the field of biomedical device design, experiments involving the implantation of medical devices into animals can prove that a device functions, but such in vivo trials are lengthy and costly as well as not always being indicative of the effects the implant will have in humans.

Complications, ranging from the minor to the potentially fatal, are widespread among patients who receive implants either as a long-term solution to a failing heart or as a temporary ‘bridge’ while they await a transplant. Though such implants play a vital role in prolonging the lives of people with cardiovascular disease, reducing their side-effects through improved in vitro design would undoubtedly increase patients’ quality of life and their chances of long-term survival. That is particularly true in the case of ventricular-assist devices (VADs), battery-operated pumps that support a failing left ventricle and help supply blood to the rest of the body. VADs are primarily used to buy patients time until a heart donor can be found, but even in a best case scenario they can currently only extend a patient’s life by up to two years and frequently just a few months.

By applying PIV technology in their development Lagasco expects it would be possible to greatly enhance their performance and grant patients more time to obtain a transplant.

“With so few donors available compared to the people who need new hearts the number of people with implants is only going to continue increasing,” notes Lagasco.

Indeed, cardiovascular disease is the principal cause of death in Europe, claiming around four million lives a year. “That is why we saw the need for this technology to be applied in the medical sector,” Lagasco says.

At the core of the project’s PIV system is miniaturised optical sensor technology using ultra-thin laser light sheets to capture images of the fluid dynamics of blood flowing through implanted devices. Numerical analysis is carried out on the images in a parallel computing subsystem allowing device designers or doctors to detect problems with the blood flow, such as high velocity gradients that can cause blood cell damage, or low velocity that could lead to thrombosis or coagulation.

Based on the results of trials, by employing parallel computing the analysis can be performed in under a day in 80 per cent of cases and in less than two days in all cases.

“As computer processing power increases we estimate that within two years the analysis could probably be performed in two to three hours,” Lagasco says. “That compares with the weeks or months it can take to obtain results from using traditional PIV systems.”

Having tested the system in vitro during the project, the partners are planning to develop and evaluate it further in trials involving a medical device manufacturer.

“We’re currently in talks with Sorin, a multinational producer of heart valves, and with an Italian SME that is looking to use SMART-PIV to optimise the design of their VADs,” Lagasco says. “The commercial possibilities for the system are therefore extensive and a product based on the project results will probably be in use within the next few years.”

PLEASE MENTION IST RESULTS AS THE SOURCE OF THIS STORY AND, IF PUBLISHING ONLINE, PLEASE HYPERLINK TO: http://istresults.cordis.lu/
Contact:
Tara Morris,
+32-2-2861985,
tmorris at gopa-cartermill.com.

Posted by Industrial-Manufacturing at 01:33 AM | Comments (0)

Dorm Necessity 101: Norcent Home Theater System

Company offers systems perfect for dorm living: fully featured, smart styling, affordably priced.

San Dimas, CA (PRWEB) September 29, 2005 -- Along with the laptop, a closet stuffed with clothes, athletic gear, and - oh yeah - a textbook or two, there is a new item fast becoming a dorm room staple on college campuses across America: a Home Theater System. Norcent, a leading supplier of consumer electronics, has two systems that are perfect for dorm life. They are the compact and affordable DP-2700 and DP-5000. Each designed with an attractive low-profile chassis.

“Living in a dorm has changed,” commented Jennifer Long, Norcent CEO. “It wasn't that long ago that having a transistor radio would suffice as entertainment. Now home theater systems provide a full range of entertainment options for dorm dwellers. Our Norcent Home Theater Systems are very stylish, feature rich, and, maybe most important, are priced for a college student's - or Mom and Dad's - budget.”

A special feature of these attractive systems, especially if the student is not taking advanced engineering, is they offer easy-to-install functionality. Both also feature a single-disk Progressive Scan DVD player, with Dolby Digital and Dolby Pro Logic surround sound for realistic, high-fidelity sound and life like video quality.

A full-function remote control allows users to effortlessly navigate the display and on-screen menus. They also feature eight different language soundtracks and captions in 32 languages (the latter two, of course, students will claim are useful for studying foreign languages). An AM/FM PLL digital tuner, with 40 memory presets, is also included.

The DP-2700
The 350-watt (PMPO) DP-2700 is a complete system in a thin, low-profile design. It plays virtually any media a college student would want (for at least this semester)-DVD, DVD-R/-RW, DVD+R/+RW, CD, CD-R/-RW, MP3-CD, and Picture-CD. It comes complete with five speakers and a subwoofer (front, 50w x 2; center, 50w x 1; surround, 50w x 2; and sub, 100w x 1).

The DP-5000
For larger dorms or dorm/apartments, the DP-5000 delivers a full 600 watts (PMPO). It too is fully compatible with a variety of media formats, including DVD, CD, CD-R/-RW, MP3, DVD+R/+RW, and DVD-R/-RW. The five speakers and subwoofer (front, 80w x 2; center, 80w x 1; surround, 80w x 2; and sub, 200w x 1) provide an exceptional, rich and full sound.

The Norcent DP-2700 and DP-5000 Home Theater Systems are in stock and ready for immediate shipping. They carry an MSRP of $109.99 (DP-2700) and $129.99 (DP-5000).

About Norcent
Norcent is a worldwide, award winning consumer electronics manufacturer dedicated to bringing the latest in high-tech digital technology to the mainstream consumer market. Norcent's ability to leverage the most competitive ISO certified manufacturing facilities allows it to provide cutting-edge digital products to consumers at the best overall value. For more information please visit www.norcent.net or send an email to e-mail protected from spam bots.

Contact:
Susan van Barneveld
Antarra Communications
(714) 891-3660
Cell (562) 688-8621
e-mail protected from spam bots

Norcent is a trademark of Norcent Technology, Inc. All other products or services mentioned are the trademarks, service marks, registered trademarks or registered service marks of their respective owners.

Posted by Industrial-Manufacturing at 01:33 AM | Comments (0)

Norcent Announces New Family of LCD TVs

New series provides exceptional image quality, styling, performance and value.

San Dimas, CA (PRWEB) September 29, 2005 -- Norcent, a leading supplier of consumer electronics, has announced a new family of LCD TVs. The series includes four models with 20”, 27” and 32” displays, providing consumers with a range of options. With an impressive list of features, a sleek flat-panel design and superior image quality and performance, this new series delivers exceptional value to consumers looking to step up to an LCD TV.

“We're excited to be announcing this new line of full featured LCD TVs,” said Jennifer Long, CEO at Norcent. “Each product within the series offers all the features and performance that make LCD television so attractive, while the range of products meets varying consumer needs. Whether you're looking for a widescreen LCD TV to fill up a large entertainment room or just higher image quality and performance in a TV for a smaller living room or bedroom, this new line-up has an option that fits right in.”

Three of the four models in the series include built-in PC input and all feature a 181-channel tuner with MTS, SAP, closed caption and V-chip. Wide 170-degree horizontal and vertical viewing angles provide exceptional viewing in varied applications. In addition, built-in speakers and Dolby Digital surround sound add to the cinematic experience. The new series also supports multiple input options, including Composite, Component and S-Video, for maximum performance and flexibility.

Three screen sizes provide range of options
Each model in Norcent's new family of LCD TVs offers amazing consumer value and a long list of features.

LT-3222 LCD TV
The LT-3222 is Norcent's new 32” LCD TV, the largest in the family. This model provides 1366 x 768 resolution and a high level of brightness (550 cd/m2). A superior contrast ratio of 1000:1 creates breathtaking, life-like images. The LT-3222 comes with two 10-Watt speakers, on-screen menus in English, French and Spanish, easy auto channel programming, convenient sleep timer settings and favorite channels presets.

LT-2722 LCD TV
The LT-2722 is Norcent's new 27” LCD TV. This model provides 1280 x 720 resolution and a high level of brightness (550 cd/m2). A superior contrast ratio of 600:1 for amazing picture quality. The LT-2722 comes with two 5-Watt speakers, on-screen menus in English, French and Spanish easy auto channel programming, convenient sleep timer settings and favorite channels presets.

LT-2022 LCD TV
The 20” model is a full-featured option for consumers who want a slightly smaller screen. 640 x 480 resolution, high brightness (500 cd/m2) and a high contrast ratio of 500:1 provide crystal clear images and tremendous value. Like the LT-2722, viewers enjoy 2 built-in 5-Watt speakers, as well as trilingual menu options (English, French and Spanish).

LT-2023 LCD TV
The powerful and vibrant LT-2023 comes with PC input and is perfect for consumers looking for the quality and performance of an LCD TV in a smaller footprint. This 20” model offers (800 x 600) resolution, high brightness (500 cd/m2) and a high contrast ratio of 500:1 for amazing image quality at an affordable price point. Viewers can access on-screen menus in either English, French or Spanish with auto channel programming, convenient sleep timer settings and favorite channels presets.

Pricing and availability
Norcent's new LT-2722, LT-2022 and LT-2023 are currently available, with the LT-3222 coming in October, and MSRPs starting at $549.

About Norcent
Norcent is a worldwide, award winning consumer electronics manufacturer dedicated to bringing the latest in high-tech digital technology to the mainstream consumer market. Norcent's ability to leverage the most competitive ISO certified manufacturing facilities allows it to provide cutting-edge digital products to consumers at the best overall value. For more information please visit www.norcent.net or send an email to e-mail protected from spam bots.

Contact:
Susan van Barneveld
Antarra Communications
(714) 891-3660
Cell (526) 688-8621
e-mail protected from spam bots

Norcent is a trademark of Norcent Technology, Inc. All other products or services mentioned are the trademarks, service marks, registered trademarks or registered service marks of their respective owners.

Posted by Industrial-Manufacturing at 01:32 AM | Comments (0)

Norcent Unveils New 42-inch HD Plasma TV

New model offers updated design and the excitement of HD Plasma TV at an outstanding consumer value.

San Dimas, CA (PRWEB) September 29, 2005 -- Norcent, a leading supplier of consumer electronics, unveiled the new PT-4240HD, a 42” high definition Plasma TV. Sporting an updated design along with extremely high resolution and response time and an estimated street price of only $1,999, the PT-4240HD brings the excitement of plasma TV and exceptional value to cost-conscious consumers seeking the next step up in home entertainment.

Norcent's PT-4240HD achieves 1024 X 768 resolution and a 3000:1 contrast ratio on a wide 42” plasma display. It offers the true High-Definition experience with 16.7 million colors, an integrated digital tuner and Component, DVI video and PC input options for sharp color reproduction. Viewers have access to on-screen menus in English, French and Spanish that provide 181 auto channel programming, convenient sleep timer settings and favorite channel presets. Two built-in 5-watt speakers recreate the cinematic experience with dynamic, realistic audio.

“With a new design, full functionally, and incredible value, the PT-4240HD is unlike anything on the market today,” said Jennifer Long, CEO at Norcent. “The PT-4240HD will not only look stunning in the homes of consumers, but we've also priced it competitively without sacrificing features to deliver the best value possible to consumers who want exciting home entertainment on a wide plasma display.”

Pricing and Availability
Norcent's 42” HD Plasma TV will be available October 2005 at an estimated street price of $1,999.

About Norcent
Norcent is a worldwide, award winning consumer electronics manufacturer dedicated to bringing the latest in high-tech digital technology to the mainstream consumer market. Norcent's ability to leverage the most competitive ISO certified manufacturing facilities allows it to provide cutting-edge digital products to consumers at the best overall value. For more information please visit www.norcent.net or send an email to e-mail protected from spam bots.

Contact:
Susan van Barneveld
Antarra Communications
(714) 891-3660
Cell (562 ) 688-8621
e-mail protected from spam bots

Norcent is a trademark of Norcent Technology, Inc. All other products or services mentioned are the trademarks, service marks, registered trademarks or registered service marks of their respective owners.

Posted by Industrial-Manufacturing at 01:31 AM | Comments (0)

myTego.com Releases New Tego Skins for Apple's Hot iPod Nano

myTego.com the world's leader in mobile device personalization has just released it new template for the hot new Apple iPod Nano.

(PRWEB) September 29, 2005 -- myTego.com is pleased to announce the launch of myTego mobile device “TEGO” skins for the Apple iPod Nano. With the launch of the new iPod, myTego is now able to provide the only completely customer customization product which reflects the users own tastes and styles. myTego’s removable, adhesive-backed vinyl mobile device skins are manufactured with the highest quality materials and are precision cut for each device model to ensure a perfect fit. Those early adopters with Apple iPod Nano’s can now fully personalize it using the interactive Tego Builder; they can upload their own photos or artwork, skew, stretch, rotate the image, change the color of the background, and write text. All of this is then transformed into unique, personal skins, delivered to their door for their Nano by myTego.

"We are the only company in the world that lets you get this interactive while designing a Tego Skin for your device; this offers a whole new level of personalization and customization" said Johnny Kien, Marketing Advisor for myTego, Inc. "We are always working forward to have the latest templates on the newest devices – now we have the unique ability to create custom Tego skins for this fabulous new iPod!

Tego skins are available immediately online and are available worldwide, through myTego's online store at www.myTego.com. Tego skins start at about $12 Canadian each, which includes full customer creative control. The customer goes to the website and selects their device and can completely design their own artwork. Apple iPod formats already supported are the iPod 3G, 4G, iTrip (accessory), Mini, and Shuffle. Additional Apple iPod platforms will be supported immediately as they are launched.

For more about myTego, Inc., please visit: www.myTego.com or contact us at 1-866-9-MYTEGO

About myTego, Inc.

myTego, inc. provides the highest level of personalization using a unique creative interface where users can see their device in real time and make any and all creative adjustments. TEGOs are about being able to express personal tastes and stand out in a world with a zillion Motorola's, iPods, Nintendo's, Nokia's , etc. Tego’s are made with the highest quality materials available and are precision cut to cover the entire device to help protect it while also offering a personal touch of style.

myTego makes Tego custom skins for all the major portable electronic devices such as Cell Phones, Camera Phones, Electronic Organizers, MP3 Players, Gaming units, and many other devices. This includes worldwide brands, including Apple, Nokia, Audiovox, Samsung, Motorola, Nintendo, Sony Ericsson, Kyocera, Palm, Siemens, NEC, Sanyo, Panasonic, Blackberry, Handspring, and HP to name but a few.

Posted by Industrial-Manufacturing at 01:30 AM | Comments (0)

myTego.com Releases New Tego Skins for Apple's Hot iPod Nano

myTego.com the world's leader in mobile device personalization has just released it new template for the hot new Apple iPod Nano.

(PRWEB) September 29, 2005 -- myTego.com is pleased to announce the launch of myTego mobile device “TEGO” skins for the Apple iPod Nano. With the launch of the new iPod, myTego is now able to provide the only completely customer customization product which reflects the users own tastes and styles. myTego’s removable, adhesive-backed vinyl mobile device skins are manufactured with the highest quality materials and are precision cut for each device model to ensure a perfect fit. Those early adopters with Apple iPod Nano’s can now fully personalize it using the interactive Tego Builder; they can upload their own photos or artwork, skew, stretch, rotate the image, change the color of the background, and write text. All of this is then transformed into unique, personal skins, delivered to their door for their Nano by myTego.

"We are the only company in the world that lets you get this interactive while designing a Tego Skin for your device; this offers a whole new level of personalization and customization" said Johnny Kien, Marketing Advisor for myTego, Inc. "We are always working forward to have the latest templates on the newest devices – now we have the unique ability to create custom Tego skins for this fabulous new iPod!

Tego skins are available immediately online and are available worldwide, through myTego's online store at www.myTego.com. Tego skins start at about $12 Canadian each, which includes full customer creative control. The customer goes to the website and selects their device and can completely design their own artwork. Apple iPod formats already supported are the iPod 3G, 4G, iTrip (accessory), Mini, and Shuffle. Additional Apple iPod platforms will be supported immediately as they are launched.

For more about myTego, Inc., please visit: www.myTego.com or contact us at 1-866-9-MYTEGO

About myTego, Inc.
myTego, inc. provides the highest level of personalization using a unique creative interface where users can see their device in real time and make any and all creative adjustments. TEGOs are about being able to express personal tastes and stand out in a world with a zillion Motorola's, iPods, Nintendo's, Nokia's , etc. Tego’s are made with the highest quality materials available and are precision cut to cover the entire device to help protect it while also offering a personal touch of style.

myTego makes Tego custom skins for all the major portable electronic devices such as Cell Phones, Camera Phones, Electronic Organizers, MP3 Players, Gaming units, and many other devices. This includes worldwide brands, including Apple, Nokia, Audiovox, Samsung, Motorola, Nintendo, Sony Ericsson, Kyocera, Palm, Siemens, NEC, Sanyo, Panasonic, Blackberry, Handspring, and HP to name but a few.

Posted by Industrial-Manufacturing at 01:30 AM | Comments (0)

September 28, 2005

Audio Visual Equipment Distributor AV Bluebook Offers Resellers Improved Payment Terms through their SmartCredit Program

AV Bluebook, America's only value-added national distributor of audio-visual, multimedia and presentation products, has become the first distributor to offer clients flexible payment methods through its new AV Bluebook SmartCredit program for audio visual equipment resellers.

Cambridgeport, VT (PRWEB) September 28, 2005 -- AV Bluebook, America's only value-added national distributor of audio-visual, multimedia and presentation products, announced availability of its new AV Bluebook SmartCredit program for
audio visual equipment resellers.

“We recognize that in the AV Industry, cash flow is the name of the game, especially this time of year,” said AV Bluebook President Bob Singleton, Sr. “That is why I am especially pleased to introduce our new program, AV Bluebook SmartCredit from TermsPlus™.”

AV Bluebook SmartCredit provides
audio visual equipment resellers with the opportunity to increase cash flow without any additional cost by providing extended 60-day payment terms. While most AV Distributors provide 30 day terms, AV Bluebook SmartCredit lets resellers take up to 60 days to pay their invoices. This program also offers resellers a much higher credit limit than is available through most distributors. Backed by HSBC, the world’s 2nd largest financial services firm, AV Bluebook SmartCredit offers higher credit limits to give resellers more purchasing power. In addition, AV Bluebook SmartCredit gives resellers a dedicated line of credit for a temporary cash-squeeze or the need to “float” a balance beyond 60 days.

“We are delighted to be the first
audio visual equipment distributor to offer a program like AV Bluebook SmartCredit to our resellers” said AV Bluebook Sales Supervisor Michelle Mack. “SmartCredit gives our resellers a leg up by allowing them to select the payment methods that best meet their needs.”

For 30 years, AV Bluebook’s professional sales and support team has provided solutions for the resellers’ needs. For more information about the AV Bluebook SmartCredit program or to request a sample copy of the AV Bluebook catalog, visit www.avbluebook.com or call 800.631.7791.

Posted by Industrial-Manufacturing at 01:52 AM | Comments (0)

Casting Call for Digital Cable Ready Solutions

New research from The Diffusion Group predicts digital cable ready devices to surpass 120 million units by 2010.

Dallas, TX (PRWEB via PR Web Direct) September 28, 2005 -- Today's set-top boxes will gradually give way to Digital Cable Ready devices such as TVs and DVRs that first use CableCARDs and then downloadable security to enable consumers to receive services from a local cable operator. According to The Diffusion Group's latest report, The Transition to Digital Cable Ready: Analysis and Forecasts, TV, DVR, and set-top manufacturers will begin mass shipments of these devices in 2006, with cumulative deployments expected to grow 17 fold by 2010.

"While Digital Cable Ready (DCR) deployments will expand rapidly in the next few years, the product is anything but straightforward," says Gary Sasaki, consulting analyst with The Diffusion Group. "Because the early DCR solutions such as the CableCARD can involve as many as six parties - the MSO, the technician, the consumer, the CableCARD vendor, the television/DVR/STB vendor, and the retailer - it is easy to point fingers at the other guy when something goes wrong. This confusion can make it particularly frustrating for all involved. Many current CableCARD users report four or more technician visits, along with multiple phone calls to television support. MSOs often try to push a STB or DVR on the subscriber, saying that the CableCARD simply does not work."

Currently, digital cable set-top boxes are proprietary and specific to the network operator - thus, they cannot be used on cable networks other than pay TV service operator who distributes the STBs. Standards pushed by U.S. government mandate that new set-top boxes are capable of working with all US cable systems, regardless of the network operator in question. With Digital Cable Ready solutions such as the portable CableCARD and downloadable security, new set-top boxes can be used on multiple network systems. As with the transition from broadcast TV to analog cable TV, it won't be long until the functionality of a separate digital STB will soon become embedded within the TV or DVR itself.

TDG's latest report, The Transition to Digital Cable Ready: Analysis & Forecasts, provides a detailed examination of the transition from analog to digital set-top boxes, to CableCARDs and ultimately downloadable security. The report provides a detailed explanation of technologies and specific standards involved in the transition to Digital Cable Ready; an analysis of the market and bureaucratic forces driving the movement to embedded conditional access and security in the US cable industry; an examination of consumer TV purchase intentions and familiarity with Digital Cable Ready products; as well as detailed forecasts for Digital Cable Ready products through 2010.

About The Diffusion Group (TDG)

The Diffusion Group is a consumer technology research and strategic marketing firm focused on the connected consumer and new media. Our mission is simple: to provide timely, actionable intelligence designed to best position new consumer technologies for rapid diffusion. TDG is committed to providing market research and strategic consulting services based on conservative, real-world analysis and market forecasts grounded in consumer research. For more information about The Diffusion Group, visit our website at www.tdgresearch.com.

Contact:
Andy Tarczon
469-287-8060

Posted by Industrial-Manufacturing at 01:43 AM | Comments (0)

American Sensor Technologies Named Among New Jersey’s Fastest Growing Technology Companies

American Sensor Technologies, a NJ-based manufacturer of state-of-the-art, MEMS-based pressure sensors, transducers, and transmitters, ranked twenty-fifth in Deloitte’s Technology Fast 50 Program for New Jersey, a ranking of the 50 fastest growing technology companies in the state by Deloitte & Touche LLP.

(PRWEB) September 28, 2005 -- American Sensor Technologies, a NJ-based manufacturer of state-of-the-art, MEMS-based pressure sensors, transducers, and transmitters, ranked twenty-fifth in Deloitte’s Technology Fast 50 Program for New Jersey, a ranking of the 50 fastest growing technology companies in the state by Deloitte & Touche LLP.

Rankings are based on the percentage of growth in fiscal year revenues over five years, from 2000 – 2004. Last year, AST placed fifth in the ranking.

“With our innovative sensor technology and experienced team of engineers, American Sensor Technologies has been very successful in growing both its revenue and customer base in the highly competitive global sensor market,” states Karmjit S. Sidhu, Vice President Business Development, American Sensor Technologies. “During the past year, we also acquired the capital stock of Macro Sensors, LVDT manufacturer innovators. Through this acquisition, AST can offer a greater depth of sensor products and expertise to better serve its client base and gain even greater market share.”
To qualify for the Technology Fast 50, companies must have base-year operating revenues of at least $50,000 and current-year operating revenues of at least $1,000,000 in 2004. The company must be headquartered in North America, owns proprietary technology that contributes to a significant portion of its operating revenues and devotes a significant proportion of revenues to research and development of technology.
Winners of the 19 regional Technology Fast 50 programs in North America are automatically entered into the Deloitte Technology Fast 500 program, which ranks North America’s top 500 fastest growing technology companies. Winners of this program will be announced in October 2004. For more information on the Deloitte Technology Fast 50 or Fast 500 programs, visit www.fast500.com

About AST
AST manufacture state-of-the-art, MEMS-based pressure sensors, transducers, and transmitters that offer the best price-performance ratio in the industry. Common applications of AST sensor products are in industrial OEM, hydraulic systems, fuel cells, medical gases, HVAC/R, refrigeration (ammonia, Freon, CO2), oil & gas exploration and production, and off-road vehicles. By combining exotic metals and AST’s exclusive, proprietary Krystal Bond™ Technology (an advanced process in which inorganic materials are molecularly diffused onto a metallic surface in the presence of certain gases), AST can produce high-performance strain gauge pressure sensors that support the specialized needs of key niche markets. Many AST products are UL listed as intrinsically safe and certified for explosion-proof required environments. Some of the world’s most highly respected industrial Fortune 500 corporations have tested and now use AST products in a wide range of critical and harsh environments. For more information on AST products and technology, go to AST’s website at www.astsensors.com.

About Deloitte
Deloitte, one of the nation’s leading professional services firms, provides audit, tax, financial advisory services and consulting through nearly 30,000 people in more than 80 U.S. cities. Known as an employer of choice for innovative human resources programs, the firm is dedicated to helping its clients and its people excel. “Deloitte” refers to the associated partnerships of Deloitte & Touche USA LLP (Deloitte & Touche LLP and Deloitte Consulting LLP) and subsidiaries. Deloitte is the US member firm of Deloitte Touche Tohmatsu. For more information, please visit Deloitte’s web site at www.deloitte.com/us.

Posted by Industrial-Manufacturing at 01:42 AM | Comments (0)

SplashData’s SplashBlog Now Enables "Photoblogging" on Windows Mobile, Symbian and Palm OS Smartphones

SplashData introduces free photo sharing software for all leading mobile platforms.

San Francisco (PRWEB via MobilityNewswire) September 27, 2005 – SplashData, Inc., the leading developer of "virtual wallet" applications for mobile devices, announced that its award winning SplashBlog photoblogging solution is now available for additional mobile devices—Windows Mobile and Symbian Series 60 and UIQ. Also, new features have been added to the existing Palm OS version and web photo-hosting service. Further, the company is announcing a new business model for SplashBlog that will enable anybody to start and maintain a photoblog of up to 100 images at absolutely no cost.

For the first time, users of Windows Mobile 5.0 Pocket PC and Smartphone handhelds, plus Symbian Series 60 and UIQ wireless devices from manufacturers like Nokia, Sony Ericsson, Samsung, Motorola, HP, i-mate and others, will be able to instantly publish photos to a "photoblog" for friends and family members to see. Users will also be able to subscribe to group photoblogs to share photos on their handhelds with their friends.

SplashData will be demonstrating the new versions of SplashBlog at the CTIA Wireless IT and Entertainment Exposition from September 27 – 29 in the Nokia, Palm and Handango booths.

The process of "blogging," maintaining a personal journal on the Internet that is frequently updated, has been steadily growing in popularity. SplashBlog adds an entirely new element to blogging —- instantly publishing a photo diary from a wireless device. SplashBlog users can snap photos of vacations, newborns, and other momentous occasions, and wirelessly publish those pictures to their personal photoblogs within seconds for friends and family scattered throughout the world to enjoy.

SplashBlog streamlines the process of mobile photoblogging, allowing users to capture an image and publish it to an online photoblog in as little as two clicks. SplashBlog includes everything users need to publish their photos online, including free software for the mobile device and a free online photoblog account at SplashBlog.com. Users who publish more than 100 pictures can subscribe for additional hosting space at SplashBlog.com for $29.95 per year.

New features in SplashBlog include the ability to maintain multiple SplashBlogs from the same account—for those who may want to set up different photoblogs to suit different audiences, such as personal and business associates. And each photoblog can be configured with different access privileges enabling users to require a password to view the photoblog, or the ability to allow some or all users to post photos to a shared group blog.

A vital ingredient to blogging that has made it a global phenomenon is the ability to add personal comments to an original post, fostering a spirit of community and even controversy as differing views are expressed. The new version of SplashBlog follows in this tradition by allowing visitors to post their own comments about each published image. Comments can either be posted on the Web by visitors using a PC, or from a wireless device using SplashBlog. The user experience for reading and replying to comments using SplashBlog on a wireless device is similar to that of an instant messaging client and provides a whole new level of wireless communication with pictures and words.

While SplashData has greatly expanded both the feature-set and potential number of SplashBloggers by adding versions for Windows Mobile and Symbian OS devices, it has also made it possible for wireless device users to start and maintain online photoblogs with no out-of-pocket expenses at all. Anybody can create and maintain a SplashBlog of up to 100 images for free. Those who want to store more than 100 images at SplashBlog.com can purchase a subscription for unlimited photo hosting for $29.95 per year.

"The beauty of SplashBlog is the immediacy in which users can capture, organize and share photos, which is made possible by the tight integration between the SplashBlog handheld software and the online photo sharing site, SplashBlog.com. SplashBlog has changed the way people share photos by eliminating the hassle out of creating and maintaining an online photo album," said John Chaffee, president of SplashData. "We believe that as camera phone image quality continues to improve and the wireless networks continue to get faster and more affordable, SplashBlog will become the primary way users capture, organize and share photos."

Availability and System Requirements
SplashBlog is available now and may be downloaded from www.splashblog.com. It supports handhelds with wireless connectivity running the following operating systems:

* Palm OS 4.1 or later (Palm Treo)
* Windows Mobile 5.for Pocket PC and Smartphone (HP, Motorola, Samsung, i-mate, etc.)
* Symbian Series 60 (Nokia)
* Symbian UIQ (Sony Ericsson) – Coming soon

About SplashData, Inc.
SplashData is the leading developer of virtual wallet applications for handheld devices. SplashData's applications provide all the functions of a traditional wallet in digital form, enabling a truly mobile digital lifestyle. SplashData’s top quality products and experienced management team are playing a leadership role in the emerging mobile applications market. Founded in 2000, SplashData is privately held and based in Seattle, Washington. For more information, please visit www.splashdata.com or call 206-780-9184.

Posted by Industrial-Manufacturing at 01:41 AM | Comments (0)

Oscilloscope Added to Tiny Logic Analyzer/Signal Generator

An Affordable PC-based Tester for Electronic Designs: CWAV, a Southern California based electronics company, announced today the addition of the USBee AX Test Pod (AX) to its winning USBee product family. "The AX is an affordable PC-based pod that functions as a programmable oscilloscope, logic analyzer, and digital signal generator all in one compact and easy to use unit," stated Tim Harvey, Principal of CWAV. "This product offers engineers, students and home hobbyists an affordable and portable way to test and debug their electronic products and designs."

Temecula, CA (PRWEB) September 28, 2005 -- CWAV, a Southern California based electronics company, announced today the addition of the USBee AX Test Pod (AX) to its winning USBee product family. "The AX is an affordable PC-based pod that functions as a programmable oscilloscope, logic analyzer, and digital signal generator all in one compact and easy to use unit," stated Tim Harvey, Principal of CWAV. "This product offers engineers, students and home hobbyists an affordable and portable way to test and debug their electronic products and designs."

The AX is used for testing and controlling electronic circuit designs. It verifies analog voltage levels and digital logic, generating a visual representation of the signals. For elaborate testing, the AX's buffer capacity is able to hold substantial information. The AX relies on the USB 2.0 bus to turn an existing personal computer into a high-powered oscilloscope, logic analyzer, and digital signal generator.

CWAV designed the AX system with personal computer resources in mind. Able to stream data to and from a personal computer, the USBee AX Test Pod performs all triggering and data storing. "This is essential and makes this product affordable," adds Harvey. "The sample storage capacity of this product is beyond traditional dedicated oscilloscopes, logic analyzers, and signal generators." The AX utilizes personal computer memory as the sample buffer, allowing selectable sample depths from one million to many hundreds of millions of samples per trace.

Offered at three price points, the AX comes in Standard, Plus and Pro packages. The AX-Standard comes with oscilloscope and logic analyzer modules and is priced at $445.00 USD. The AX-Plus builds on the Standar's strengths and adds a signal generator and USB, 12C, SPI and Async decoder modules and is available for $745.00 USD. The AX-Pro contains all pieces included in the Plus package with the addition of a data logger, frequency counter, remote controller, PWM controller, frequency generator, pulse counter and the USBee AX ToolBuilder source code library. The source code library allows programming in Visual Basic of Visual C. This AX-Pro is priced at $1045.00 USD.

Software for the AX is provided at http://www.usbee.com and runs in demonstration mode without attachment to the AX. The AX product line is available for purchase at http://www.usbee.com or from CWAV's international distributors.

For more information and a high-resolution image of the USBee AX Test Pod, refer to http://www.usbee.com/usbeeax.zip. Detailed product specifications are available online or upon request. Contact CWAV by electronic mail at e-mail protected from spam bots, or request a copy by calling (951) 693-3065.

About CWAV

CWAV's mission is to be a leader in compact and affordable electronic test tools. Students, engineers, and technicians currently use CWAV's product line-up in a variety of industries throughout the world. CWAV is headquartered in Temecula, California.

Contact Name: Nicole Robbins, CWAV
Contact Phone: (951) 693-3065
Web Address: http://www.usbee.com

Posted by Industrial-Manufacturing at 01:41 AM | Comments (0)

September 27, 2005

Cell Phone Recycling Industry Rapidly Evolving; Home-Based Recycling Entrepreneurs Desperately Needed to Accomplish Governmental E-Waste Goals

Utah recycling entrepreneur/author reveals startling statistics: 500 million cell phones are currently available for recycling in the US alone, representing billions of dollars in potential income to home-based recyclers. Governmental e-waste initiatives, without the efficiency of local entrepreneurs, are doomed to failure, resulting in "tiny, toxic time-bombs" being released into landfills and aquifers by the millions.

Draper, Utah (PRWEB via PR Web Direct) September 27, 2005 -- It has long been recognized that cell phones contain many extremely toxic industrial byproducts -- lead, arsenic, cadmium, beryllium, brominated compounds, and many other carcinogenic and persistent poisons. In effect, cell phones are "ticking, tiny toxic time bombs" just waiting to be released into the environment.

An industry has been evolving to address the rapidly growing disposal challenges associated with the half-billion used cell phones and PDAs already taken out of use. This stockpile will grow by about 150 million new phones this year, and each year thereafter.

Environmentalists and government officials, alarmed at the exploding toxic threat represented by this growing waste stream, are rapidly debating legislative ways to deal with it. Scott Andrews, a Utah recycling veteran, claims that any legislative efforts to address the problem are, at best, band-aid approaches.

Fortunately, states Andrews, a large part of the solution lies in the evolution of an effective and efficient profit-driven recycling market, simlar to what occured in the late 70's with the advent of the automotive catalytic converter. During that period Mr. Andrews, through his publishing efforts, educated thousands of potential recycling entrepreneurs and motivated them to establish a steady supply stream to the ultimate refiners, while making a handsome profit themselves.

With his most recent research report, "Cell Phone Recycling For Profit", he is going to inform a new generation of local, home-based recycling entrepreneurs about the profit potential in used phones, personal digital assistants (PDAs), and other wireless devices. With the scrap value of certain personal electronic devices reaching as much as $250, Andrews states that there is plenty of motivation to collect and supply the devices to eager buyers who do not have a local presence.

In his report Andrews addresses both the opportunity, as well as the challenges, facing the local cell phone recycler. There is a growing list of buyers heavily dependent upon the efficiencies created by local recyclers, and the prices they pay vary widely, as do their service levels. Abetted by a soon-to-be-released weblog in support of his readers, he is prepared to provide up to date information on this rapidly evolving recycling niche.

Scott Andrews and his company Recyclebiz.com, are dedicated to serving the needs of the fledgling cell phone recycling industry and help alleviate the growing concerns revolving around improper disposal of this critically toxic electronic waste stream.

For additional information on the news that is the subject of this release, contact Scott Andrews or visit www.cellphones.recyclebiz.com.

About Scott Andrews and Recyclebiz.com:
Scott Andrews is a 30-year veteran of specialty recycling. Author of "High-Profit Recycling" and "The Recycler's Library", he spent many years traveling the Western US buying scrap film and marketing silver-recovery services to hospitals, newspapers, printers, and radiographic labs. He then diversified his efforts into the dental scrap arena, buying and processing precious metals waste generated in dental offices. With the advent of catalytic converters in the auto industry in the mid-seventies, he expanded into recovery of the platinum-group metals from automobiles.

A native of Attleboro, Massachusetts, and a graduate of the University of Utah, he currently resides in the Salt Lake City area with his wife Susan.

Contact:
Scott Andrews, President and CEO
Recyclebiz.com
801-414-6664
http://cellphones.recyclebiz.com

Posted by Industrial-Manufacturing at 04:24 AM | Comments (0)

New Portable College Security System Launches in September, National Campus Safety Awareness Month

Visonic's new AbbraCampus security system will help protect college students, who are most vulnerable to crimes both on and off campus during September. The AbbraCampus system is now available through Target.com.

(PRWEB) September 27, 2005 -- Visonic recently announced the launch of its latest security system, AbbraCampus, which is designed to protect college students from campus crime. This new product launch comes just in time for National Campus Safety Month, and it is now available at Target.com.

It is widely recognized that college students are most vulnerable in September due to being more lax about their personal safety and security. Being forewarned is being forearmed and while we certainly don't want students to be fearful, having a deepened awareness of surroundings as well as learning simple things they can easily do in daily lives will raise the odds in their favor substantially.

As a result, raising safety awareness for all college students and families is our mission, our simple 10 step Campus Safety Brochure is a must read especially for all undergraduate students and parents. Did you know that 80 percent of all campus crime is perpetrated by students, and approximately 90 percent involve drugs and alcohol?

"I just feel so much safer now that I have this system, I don't worry about someone coming in when I'm studying or sleeping," said Adrianne Hooten, a junior at the University of Texas in Dallas.

The AbbraCampus security system is wireless so it sets up quickly and moves when you do so you'll be protected wherever you live. For a limited time, enjoy one year of professional monitoring with each system as well as free shipping through Target.com exclusively.

Help us help college students across our country be safer now. Thanks for helping us get this important message out; you just might help save a life.

World Leader in the Security Industry
Established in 1973, the Visonic Group has built a strong reputation as a world leader in the design, development, and manufacture of high quality systems and products for the security industry. With over 30 years of experience in every aspect of security, Visonic serves institutional, industrial, commercial and residential markets for both personal and property protection. The Visonic Group is recognized for its advanced patented technologies, reliable high performance systems, and responsive customer support worldwide. Visonic products are designed to comply with international standards and regulations and are approved for use by local authorities in most countries.

For more information on how college students can protect themselves with Visonic's AbbraCampus security system, please contact Deborah Lanore at 502.802.2215 or visit www.target.com .

Media Contacts:
Deborah Lanore
Visonic Americas
800.223.0020 ext 318 (office)
502.802.2215 (cell)

Carli Armando
800.223.0020 ext 204

Posted by Industrial-Manufacturing at 04:24 AM | Comments (0)

Canon VC-C50 Broadband VideoConferencing Range Launched by VideoCentric

VideoCentric today launched two professional desktop video conferencing bundles based on the new Canon VC-C50 PTZ camera with 26x zoom, echo-cancelled tabletop microphone, USB adapter and H.264 control software from Polycom & Emblaze-VCON.

London, UK (PRWEB) September 27th 2005 -- VideoCentric today launched two professional desktop video conferencing bundles based on the new Canon VC-C50 PTZ camera with 26x zoom, echo-cancelled tabletop microphone, USB adapter and a choice of H.264 control software from Polycom or Emblaze-VCON.

The Canon VC-C4 has been one of the most popular professional PTZ cameras in the world for the last 5 years; its high quality, advanced pan, tilt & zoom features, remote control and compact size making it ideal for use as a professional "USB web-cam" with PCs and laptops. The newly announced Canon VC-C50 has additional features which extend VideoCentric’s desktop video conferencing range although lower priced VC-C4 versions will continue to be available for the foreseeable future. The new VC-C50-VC videoconferencing packages gain their accelerated performance from PVX or vPoint software options offering speeds up to 2Mbps over broadband IP networks together with loud-speaking echo-free audio from a separate boundary microphone.

VideoCentric’s exclusive bundles are particularly useful in schools where PCs and projectors are used with a SMARTBoard. Supplied as a complete package or as an upgrade kit, the Canon-VC bundle allows a teacher to dial-out a video call by touching the screen surface and to drag the video window around the screen using his/her finger, making it ideal for data sharing applications.

Services offered by VideoCentric in support its Canon VC bundles include:-
a) On-site customer demonstrations
b) Next day delivery from UK stock
c) Extended warranty options
d) Trade discounts with non-competitive policy for partner resellers & integrators
e) Training of reseller’s sales/technical staff
f) Interoperability testing with all leading brands, inc Tandberg, SONY, Polycom, VCON, Radvision, Codian and others.

In addition to video conferencing, some of the packages includes "one-to-many" interactive multicast streaming allowing a teacher to broadcast to numerous students and open the floor for questions, whereby students can be seen and heard by all, under the control of the streaming originator.

For vertical integrators those wishing to build the Canon VC package into their own banking, finance, agency or medical application, a full SDK (software developer’s toolkit) has also available through VideoCentric.

Speaking at Canon’s press launch in London today, David Shimell, Sales Director for VideoCentric, said, "VideoCentric’s new Canon-VC bundles are available for immediate demonstration and shipment. Our resellers are being offered an extra special trade discount on demo systems which will run up to the end of the year and training will be offered on an ongoing basis."

For more information, phone +44 (0)118 974 0125.

Posted by Industrial-Manufacturing at 04:22 AM | Comments (0)

S. G. Hart & Associates Comments on the Confronting of Counterfeiting in the Technology Industry

S. G. Hart & Associates, LLC, The Brand Equity Protection CompanyTM, was highlighted in KPMG’s weekly e-newsletter discussing counterfeiting as it relates to the technology industry. Stanley G. Hart, President & CEO, and Anthony M. Miano, Executive Partner, lent support to KPMG LLP in their assessment of the growing threat of brand protection loss in the information technology sector. The International Chamber of Commerce estimates that world-wide losses due to counterfeiting and piracy are estimated to be as high as $600 billion dollars. The Alliance for Gray Market and Counterfeit Abatement (AGMA) and KPMG estimate that approximately $100 billion of global IT industry revenue is lost to counterfeiters annually in their whitepaper titled “Managing the Risks of Counterfeiting in the Information Technology Industry.”

Ridgefield, CT (PRWEB) September 27, 2005 -– S. G. Hart & Associates, LLC, The Brand Equity Protection CompanyTM, was highlighted in KPMG’s weekly e-newsletter discussing counterfeiting as it relates to the technology industry. Stanley G. Hart, President & CEO, and Anthony M. Miano, Executive Partner, lent support to KPMG LLP in their assessment of the growing threat of brand protection loss in the information technology sector. The International Chamber of Commerce estimates that world-wide losses due to counterfeiting and piracy are estimated to be as high as $600 billion dollars. The Alliance for Gray Market and Counterfeit Abatement (AGMA) and KPMG estimate that approximately $100 billion of global IT industry revenue is lost to counterfeiters annually in their whitepaper titled “Managing the Risks of Counterfeiting in the Information Technology Industry.”

Stanley G. Hart, President & CEO of S. G. Hart & Associates, talks about how the threat to technology companies is real and growing. “There has been a change within the industry about the problem and the need to be proactive is getting much more attention.” Following the interview Hart remarked, “Industry leaders are calling upon their organizations to look for new ways to add value to their products for consumers given that competition from all quarters is becoming increasingly fierce. CEOs are beginning to realize that by recapturing lost revenue they can actually increase sales through existing channels and potentially save on warranty claims and false recalls.”

“Along with consumers, small-and medium-sized business are also vulnerable to buying counterfeit products, particularly monitors, printers and toner cartridges,” according to Executive Partner Anthony M. Miano. Miano explained, “the larger enterprise customers will have direct relationships with larger manufacturers and are fairly secure about the product’s supply chain …it’s the smaller companies trying to save money that tend to seek alternative markets where counterfeits can pop up [and quality issues arise.”

Mr. Hart concluded the article by saying that, “Counterfeiting is considered a form of fraud, so more companies are including the problem as part of their review of internal controls, which are part of the Sarbanes-Oxley Act (SOX) governing public companies.” We’re seeing that boards of directors have this on their agenda not only because of SOX, but also because of the damage this could do to a company’s brand and the liability [exposure. Directors are very involved in this.”

About KPMG LLP
KPMG is a global network of professional services firms providing Audit, Tax and Advisory services. We operate in 148 countries and have around 6,500 partners, 70,000 client service professionals, and 17,000 administration and support staff working in member firms around the world. KPMG’s purpose is to turn knowledge into value for the benefit of our clients, our people, and the capital markets. Our member firms aim to provide clients with a globally consistent set of multidisciplinary financial and accounting services, based on deep industry knowledge.

About AGMA
The goals of the Alliance for Gray Market and Counterfeit Abatement are to protect the authorized distribution channels and intellectual property of authorized goods to improve customer satisfaction and preserve brand integrity. The Alliance is a nonprofit organization composed of companies in the technology sector. For more information, please visit www.agmaglobal.org.

About S. G. Hart & Associates, LLC
S. G. Hart & Associates, The Brand Equity Protection CompanyTM, is based in Ridgefield, Connecticut, USA. S. G. Hart & Associates is a global brand protection consulting company helping clients develop and implement strategies that protect supply chains from the disruptions caused by counterfeiting, product diversion, tampering & theft. S. G. Hart & Associates ensures that the integrity of the firm’s most valuable asset is secure, that the brand’s ability to generate and preserve revenue is maximized and that effective controls are used to safeguard the branded asset against unauthorized or improper use.

Media Contact:
Director, Public Relations
S. G. Hart & Associates, LLC
31 Bailey Avenue, Suite 5
Ridgefield, Connecticut 06877 USA
Tel: 203-438-4300
Fax: 203-438-3222
Web: www.sghartassociates.com

Posted by Industrial-Manufacturing at 04:22 AM | Comments (0)

September 26, 2005

Blue Nomad, LLC Releases Mac OS X edition of BackupBuddy 2 for Palm Powered Mobile Devices

BackupBuddy 2 brings enterprise-class backup technology to Palm Powered Mobile Devices and computers running Mac OS X.

Santa Monica, CA (PRWEB via MobilityNewswire) September 26, 2005 -- Blue Nomad, LLC today announced the immediate availability of the Mac OS X edition of BackupBuddy 2 for Palm Powered handhelds and smartphones. BackupBuddy 2 uses a unique process for maintaining a complete history of any given device's files and settings so that users can restore individual files or their entire device to any previous point in time with the simple click of a button, a process called ZoomBackTM. BackupBuddy 2, when used with a Palm Powered device, provides a complete backup solution for both consumer and enterprise customers. BackupBuddy 2 for Mac OS X contains all the features present in its Windows counterpart and works both with the MissingSync from MarkSpace, as well as with the standard HotSync software as supplied by PalmOne.

"We are very excited to bring our advanced backup and restore technology to the Mac platform. Mac users need not ever fear loosing any data knowing that BackupBuddy is keeping track of each and every change that they make to their devices, and can restore them to working condition with the press of a button," says Alexis S. Hinds, CEO of Blue Nomad.

"This is wonderful news for Mac owners with Palm OS handhelds and smartphones," said Brian Hall, president and CEO or Mark/Space, Inc., maker of The Missing Sync for Palm OS. "BackupBuddy goes well beyond simple backup and restore and our customers are certain to find BackupBuddy an indispensable tool for securing the personal and business data that they store on their handhelds and smartphones."

Palm OS is known for the power and flexibility of its sophisticated, easy-to-use interface. As the foundation for the 30 million mobile devices sold to date, Palm OS platform provides an open, modular architecture that allows licensees including Aceeca, AlphaSmart, Fossil, Founder Technology, Garmin, GSL, HuneTec, Kyocera, Lenovo, palmOne, PerComm, Samsung, Sony, Symbol Technologies and Tapwave

Pricing and Availability
BackupBuddy 2 is available now from Blue Nomad's website (www.bluenomad.com) for $29.95. BackupBuddy 2 also contains a license for BackupBuddyVFS:LiteTM which allows users to effortlessly backup their organizer's critical files to the Sony Clie's Memory Stick® or to Secure Digital or MultiMedia expansion cards.

About Blue Nomad, LLC
Blue Nomad, LLC, was founded in 1997 by Alexis S. Hinds, M.D. Blue Nomad has developed a comprehensive suite of award-winning backup and installation software for the Palm OS.

Palm, Palm OS and PalmSource are registered trademarks of, and Palm Powered is a trademark of, Palm Trademark Holding Company, LLC. Other brands may be trademarks of their respective owners.

Posted by Industrial-Manufacturing at 10:29 AM | Comments (0)

CY Digital Introduces CY Signature: Bringing Luxury Into Home Theaters With Swarovski Crystal-Studded Plasma TV Frame

CY Signature, a division of CY Digital, has unveiled its new high-end home theater customization with an option to crystallize.

Boston, MA (PRWEB) September 26, 2005 -- CY Signature, a division of CY Digital, has unveiled its new high-end home theater customization with an option to crystallize.

CY Digital, a home theater company, has introduced its CY Signature line with an array of custom home theater options. With the "Build Your Own Home Theater" function, you can customize your TV size, speaker color, and a variety of other choices that truly cater to your needs. From luxurious reclining leather seats to automated home lighting fixtures, CY Signature, in keeping with the goal of its predecessor, CY Digital, makes the home theater purchase a simple one.

An addition to their assortment of TV accessories, CY Signature's latest creation is a crystal-studded frame that was recently included in the 2005 Emmy's Ultimate Nominee TV Gift Bag by Madison & Mulholland. Among the nominees who received the Bag are Eva Longoria, Teri Hatcher, Paris Hilton, and Ashton Kutcher to name a few. The featured frame was covered in over 3,000 Swarovski crystals for an estimated price that exceeds $25,000. Each frame will be custom designed and hand-made. According to Yumin Choi, CEO and designer of the crystal frames, "With the growing infatuation for crystal-studded accessories and clothes, it was only a matter of time before it entered the home theater world. We want to give people the opportunity to bring personal panache and flavor into their home theater." With the most basic crystal-studded frame starting at $15,000, there is no limit to how expensive or how extravagant the frame can become. Each creation will be unique and cater to the person's style. This will truly be the next phase of luxury entertainment.

With persistent attitudes and innovative minds, Choi and Yeomans of CY Digital introduce themselves as problem solvers. The conventional notion of home theater or electronics installation does not confine this company to traditional avenues. Choi and Yeomans seek to establish a new wave of technology in an attempt to combine luxury with individuality. From nightclubs to residential homes, CY Digital will work with its customers to bring a personal touch to an otherwise impersonal digital market.

For those who may be thinking about building a new home theater or just updating your TV and sound system, all you have to do is fill out the form at the end of the customization page on CY Signature's website and a Home Theater Designer will contact you for a consultation.
For more information visit: http://www.cysignature.com or http://www.cydigital.com

You can also call 1-888-617-TECH (8324).

Posted by Industrial-Manufacturing at 10:28 AM | Comments (0)

Stellus Systems Announces that Its StarNet SD GPS Receiver Is Compatible with the Samsung i730 Smartphone

First SD GPS receiver with pocket PC 2003 drivers for the i730.

Palo Alto, CA (PRWEB) September 26, 2005 -- Stellus System, Inc., a leading system integrator of wireless communication products, announced that their StarNetTM GPS SDIO receiver – a high-performance, rugged GPS (Global Positioning System) receiver with a SDIO (Secure Digital Input/Output) interface is now compatible with the Samsung i730 Smartphone. Simply plug in the StarNet GPS receiver into your i730 and you can use it for in-car navigation, recreation, surveying or other location-specific information applications.

“The i730 Smartphone is growing rapidly in popularity because Verizon Wireless is offering it, and because of its unique design and technology features,” said Craig Conkling, CEO of Stellus Systems. “The i730 has Wi-Fi connectivity as well as cellular, and together with Stellus’ StarNet SD GPS receiver, can promotes additional location-based services such as location-specific traffic or weather and other information,” he added.

StarNet is a GPS accessory that puts navigation and find-and-locate capabilities for home or business addresses, ATMs, restaurants and recreational activities (such as golf, boating and hiking), at your fingertips – a map-in-your-hand that helps you get where you’re going. The Pocket PC handheld market is expanding its market share, and with the growing use of Smartphones, Stellus’ StarNet SD GPS receiver is poised to enable additional functionality and services.

Stellus’ innovative design combines a high-performance GPS antenna and receiver, with a SDIO interface IC (integrated circuit), in a compact housing that fits in your brief case or pocket and weighs less than one ounce. StarNet consumes less than 200 mW in tracking mode and has an accuracy of 3 meters (CEP – 50% of the time) and 6 meters (2DRMS – 95% of the time).

Product Availability:

StarNet is available now for purchase through one of Stellus’ reps and distis worldwide, www.stellussystems.com/

Contact Information and Product Inquiries, worldwide:

Hunter Smith
Tel: +1-650-353-4222
e-mail protected from spam bots

About Stellus Systems, Inc.:

Located in the heart of Silicon Valley, Stellus Systems is a leading system integrator of wireless communication products that use off-the-shelf Global Position System (GPS) and a Secure Digital Input/Output (SDIO) interface integrated circuits (ICs) to create a fully-functional system solution for the consumer market. Stellus’ unique solutions are small and compact, and when inserted into the SDIO slot in a mobile or portable product, enable them to be a GPS receiver.

Stellus’ solutions are available for channel resellers, VARs and OEMs to license for resale. The production ready modular designs can easily accommodate modifications to the PCB, external plastic casing and logo, and software drivers per customer requirements.

For more information on Stellus’ product offerings, visit our Web site at www.StellusSystems.com.

Posted by Industrial-Manufacturing at 10:28 AM | Comments (0)

Dialog Semiconductor Launches New Integrated General Purpose Power Management Controller

Dialog Semiconductor Plc has launched a new general purpose device for use as a core building block in power management sub-systems in portable electronics equipment, audio players, cellular handsets and digital cameras. The new DA9025 high performance power management controller takes a system level approach to managing the multiple power domains and voltage requirements of lithium powered portable applications, integrating a number of functions and interfacing directly with a battery pack.

Kirchheim/Teck, Germany (PRWEB) September 26, 2005 -- Dialog Semiconductor Plc (NASDAQ: DLGS, FWB: DLG) has launched a new general purpose device for use as a core building block in power management sub-systems in portable electronics equipment, audio players, cellular handsets and digital cameras. The new DA9025 high performance power management controller takes a system level approach to managing the multiple power domains and voltage requirements of lithium powered portable applications, integrating a number of functions and interfacing directly with a battery pack.

Containing four low power, high performance, low dropout regulators based on Dialog Semiconductor’s unique ‘Smart Mirror™’ technology, a real time clock supply and a high efficiency buck converter, the new IC fits between the simple single function device such as a low dropout regulator (LDO) or switching converter, and sophisticated system-on-chip ICs. The main benefit of this approach is that it reduces the cost and PCB overhead of having to build in multiple off-the-shelf, low-integration power management components from multiple vendors.

The DA9025 can be used both standalone with pre-determined power-up sequence for simple operation, or controlled by an I2C bus for greater control and programmability of output voltages and power in individual blocks.

Power efficiency and therefore longer battery life is enabled using Dialog Semiconductor’s patented and unique Smart Mirror™ architecture – a technology that optimizes quiescent current consumption by matching it to the current demand and performance required, removing the need for a low power mode and the associated hardware and software overhead.

Typical handheld applications for the DA9025 include those with a lithium power source, processor controlling the main functionality, memory, external peripherals such as a display, memory expansion such as SD or MMC card and some analog functionality such as data conversion or sensor interfacing.

Such a system requires a number of different power domains. For example, the processor may typically require two supplies, a low voltage for its core to save power consumption and higher voltage to interface with the other devices. Analog functions tend to require higher voltages to guarantee operating headroom or provide powerful output drivers and display drivers tend to require higher voltages as display size and complexity increases.

The DA9025’s low dropout voltage regulators are designed specially for supplying stable voltages to various parts of the system. The low drop linear regulators are optimized for critical system parameters such as low noise, high power supply rejection or low quiescent current. Two of the LDOs may be used to supply audio or RF circuits as they are low noise and typically exhibit more than 80dB power supply rejection.

Battery supplies to the regulators are separated to maximize isolation. Under I2C control the regulator output voltage is also programmable. A fifth integrated regulator provides a supply for a real time clock. This is permanently active when the battery is connected but is a very low quiescent current design.

The integrated DC-DC buck converter has a programmable range of 0.85 to 3.3V, with a default supply of 1.8V at up to 400mA. In many systems the buck converter is used to power the system processor and memory. The buck converter may be set to operate in either synchronous or asynchronous modes to optimize operating efficiency depending on load current. The converter has integrated switching FETs and requires a minimum number of external components. Under I2C control the buck converter output voltage is also programmable allowing very low voltage processors to be used.

The DA9025 is available now in a 4 * 4mm 24 QFN package.

Information about Dialog Semiconductor
Dialog Semiconductor develops and supplies power management, audio and imaging technology, delivering innovative mixed signal standard products as well as application specific IC solutions for wireless, automotive and industrial applications. The company’s expertise in mixed signal design, with products manufactured entirely in CMOS technology, enhances the performance and features of wireless, hand-held and portable electronic products. Its technology is also used in intelligent control circuits in automotive and industrial applications. Dialog Semiconductor Plc is headquartered near Stuttgart, Germany with additional design facilities in the UK, the USA, Austria and Japan. The company is listed on the Frankfurt (FWB: DLG) and on the NASDAQ (DLGS) exchanges. For more information, visit www.Dialog-Semiconductor.com

Posted by Industrial-Manufacturing at 10:27 AM | Comments (0)

WholesaleCentralUSA.com Gears Up for Busy Holiday Season as 2005 Internet Sales are Expected to Reach Record Numbers

Online sales are expected to reach the trillion dollar threshold by 2012. Online merchants such as WholesaleCentralUSA.com are well positioned to fuel this kind of growth by offering a truly secure and seamless online shopping experience.

(PRWEB) September 25, 2005 -- The 2005 Holiday Season is rapidly approaching and www.WholesalecentralUSA.com is geared up for what looks to be a very busy time for many online merchants. WholesaleCentralUSA.com is well stocked with consumer electronics, home and car audio & video equipment, digital cameras & camcorders, Plasma TVs, PC's & notebooks, computer accessories and much more. The online merchant is prepared to handle the early and last minute shoppers as online sales are expected to reach record numbers this year.

Leadpile.com says online commerce to pass $1 trillion potential and make up 25% of all sales in the United States by 2012. Leadpile.com predicts that new “Younger Super Internet Consumer” will lead the way.

The National Retail Federation is forecasting that holiday retail sales will rise 5 percent over last year. That means that registers will ring up more that $435 billion in transactions. Sales last year were up 6.7 percent from 2003 levels. If recent trends continue, it is very likely that shopping centers and stores will be looking a lot like Christmas long before Thanksgiving.

"Consumers won't have to wait until the last minute to get the best deals this year because retailers are expected to be aggressive in their pricing strategies throughout the entire holiday season," said Tracy Mullin, NRF president. "Stores are planning for holiday sales and promotions, so discounted prices won't have a negative effect on profits."

For additional information on the products offered by Wholesale Central USA, inquire at http://www.WholesaleCentralUSA.com.

www.WholesaleCentralUSA.com carries a variety of car & home electronics, cameras, camcorders, PCs, notebooks, computer accessories, house ware, kitchen products, As Seen on TV products, plasma TVs, GPS / navigation, cell phones, cordless phones, and much more. Privately owned and operated, located in Yorba Linda, Ca.

Contact:

Glen Douglas
Owner - President
www.WholesaleCentralUSA.com

Posted by Industrial-Manufacturing at 10:26 AM | Comments (0)

Sydec Audio Engineering Announces the Release of new Soundscape AES/EBU 'iBox' Audio Interfaces

Sydec Audio Engineering, the developers of the Soundscape line of Professional Digital Audio Workstations and Digital/DSP based Mixtreme and Mixpander Sound Cards are pleased to announce the release of an all new line of AES/EBU 'iBox' Audio Converter Interfaces.

Fort Lauderdale, Fla.(PRWEB) September 24, 2005 -- Sydec Audio Engineering, the developers of the Professional Soundscape 32 Digital Audio Workstation, as well as the popular Mixtreme and Mixpander DSP based sound cards, have announced the release of a new series of "iBox" Audio interfaces featuring AES/EBU format.

Erik Wijnen, Sydec Audio Engineerings spokesman stated "We are very pleased with the availability of our new series of AES/EBU Format Audio Interfaces." He continues, "with 4 models offering configurations including AES/EBU alone, AES/EBU with Analog, AES/EBU with MADI and AES/EBU with both Analog and MADI, our worldwide audience now has a range of iBox Audio Interface choices to fulfill their AES/EBU connectivity requirements."

Ian Weingold, Sydec Audio Engineerings USA spokesman offered, "These newest iBox additions share the stunning, sculpted look of the latest generation Soundscape units: Soundscape 32, Apogee I/O 896 and other new iBox models. And, just as you would expect from Sydec Audio Engineering, it combines superlative sonic quality with the legendary Soundscape build quality." Weingold continues, "Yet, there is a lot more to this unit than great looks and great sound...with it's proprietary TDM expansion port, its flexibility will make it invaluable in a wide range of configurations."

Sydec's USA office is located at 2601 East Aragon Blvd, Unit #6, Sunrise, FL 33313. Tel: 1.954.572.6391 Fax: 1.954.572.8191

Posted by Industrial-Manufacturing at 10:24 AM | Comments (0)

Tidal’s Synergy(TM) Controller Now Optimized for HALT and HASS Environmental Chambers

Tidal Engineering today announced a HALT and HASS testing configuration option for their Synergy(TM) Controller, making it the ideal choice for employment in OEM and retrofit applications. State-of-the-art Controller Boasts Industry’s most Comprehensive Set of Features and Options Engineered To Accelerate Reliability and Throughput while Reducing Costs

Randolph, NJ (PRWEB) September 25, 2005 -- Tidal Engineering, a leader in the design and development of embedded hardware and software for test and measurement and data acquisition applications, today announced a HALT and HASS testing configuration option for their Synergy(TM) Controller, making it the ideal choice for employment in OEM and retrofit applications.

The HASS (Highly Accelerated Stress Screening) and HALT (Highly Accelerated Life Testing) test methods, developed by QualMark, were designed to expose product failures quickly so they can be rectified prior to becoming costly field issues. The intent of HALT testing is to identify design defects and weaknesses in electronics and electro-mechanical assemblies, while HASS is the method used to find manufacturing/production process induced defects in these same assemblies.

Tidal’s Synergy Controller with the HASS/HALT configuration option is precisely engineered to take complete command of the chamber’s temperature and vibration systems to further improve product reliability, reduce warranty costs and increase customer satisfaction. The controller, which utilizes the Microsoft(R) Windows(R) CE .NET 4.2 embedded operating system, is developed to retrofit the most popular chamber manufacturers’ controllers/programmers.

The microprocessor-based, two-channel Synergy Controller may be confidently used in environmental testing applications in the broadest spectrum of industries and applications requiring the precise measurement and control of temperature, humidity, altitude, and now vibration. Among the most common are the electronics, aerospace, automotive, medical and pharmaceutical sectors, where controlled environments are essential for the testing, screening, and calibration of critical systems and components. Further, in addition to HALT and HASS chambers developed by QualMark, Tidal’s Synergy Controller is widely appropriate for use chambers from Envirotronics, Thermotron, Blue-M and Cincinnati Sub-Zero.

The device is available standard with either a front- or flush-mounted 320 x 240 (color STN) touch screen, and in addition to offering total programming of temperature, humidity, altitude, and vibration versus time, six event outputs are
provided for special applications, and optional features. A 100-Ohm platinum RTD is used for temperature measurement, whereas a dry capacitance type sensor is used for humidity measurement. With built-in 10/100 Base-T Ethernet, RS-232/485, GPIB communications, and Web-based remote control, the controller offers the utmost in communications capabilities. The instrument weighs 5 lbs. and measures 9.50” W X 6.75” H X 5.50” D.

Tidal’s Synergy Controller is a member of the Synergy Series of patent-pending hardware and software products designed to enhance the overall efficiency of the environmental testing process. The Series is comprised of the Synergy Controller, embedded Synergy Web Server Software, Synergy Manager Software, and Synergy UUT (Unit-Under-Test) data acquisition module. To learn more about the Synergy Series, visit www.tidaleng.com/synergy.htm.

Pricing for the Synergy Controller starts at $2,755.00 each. Delivery is from stock to 4-6 weeks. A free, 30-day Demo Offer is available through Tidal’s authorized distributor, ADI American Distributors Inc. at 800-877-0510 or www.americandistri.com.

About Tidal Engineering Corporation:
Headquartered in Randolph, NJ, Tidal Engineering Corporation has been designing and building award-winning embedded hardware and software for test and measurement and data acquisition applications since 1992. The company further provides product development services together with engineering support, and is recognized for technical expertise in such areas as Embedded IEEE 488, and turnkey SCADA (Supervisory Control and Data Acquisition) systems. Tidal’s products are available exclusively through ADI American Distributors Inc. an ISO-9002 certified distributor of electronic and electro-mechanical components and assemblies.

Tidal Engineering Corporation
2 Emery Avenue
Randolph, NJ 07869
973/328-1173; Fax: 973/328-2302
www.TidalEng.com

Posted by Industrial-Manufacturing at 10:24 AM | Comments (0)

September 23, 2005

DirectNIC in New Orleans weathering a 2nd Hurricane

Intercosmos Media Group, Inc. wants to thank all of its directNIC.com customers for the overwhelming support and inquiries into our wellbeing.

We are based in New Orleans and located in a secure and dry skyscraper, where our datacenter has remained fully operational.

Our staff is safe and well -- some have been working around the clock in New Orleans to keep clients running smoothly, and other employees have left to safer locations to keep an eye on the network from afar.

We are pleased to announce that we haven't lost service once during this entire distaster, and we have three weeks of backup power secured, and more resources are on the way.

Additionally, backup options outside of New Orleans are being implemented as an added precaution.

Thank you for your support and know we are working hard to maintain our excellent services even during this castrophe.

Sincerely,

Sigmund J. Solares, J.D., M.B.A.
CEO
Intercosmos Media Group, Inc.

Posted by Industrial at 06:08 PM | Comments (0)

New Agreement Bridges the Gap Between Conventional Design Flows for DSP and FPGA Systems using ESL Tools

In a new agreement, Sundance Multiprocessor Technology and Celoxica will combine their expertise to offer out-of-the-box digital signal processing (DSP) and FPGA system design solutions. These will be backed up by their established partnerships with Texas Instruments Inc and Xilinx Inc. Sundance is the leading supplier and manufacturer of advanced DSP and reconfigurable FPGA systems. Celoxica is the leading provider of C-based electronic system level (ESL) design and synthesis solutions. The joint approach offers users real progress in complex signal processing implementation.

Buckinghamshire, UK - September 21, 2005 – In a new agreement, Sundance Multiprocessor Technology and Celoxica will combine their expertise to offer out-of-the-box digital signal processing (DSP) and FPGA system design solutions. These will be backed up by their established partnerships with Texas Instruments Inc and Xilinx Inc. Sundance is the leading supplier and manufacturer of advanced DSP and reconfigurable FPGA systems. Celoxica is the leading provider of C-based electronic system level (ESL) design and synthesis solutions. The joint approach offers users real progress in complex signal processing implementation.

Typically performed by system and software engineers, DSP programming relies on a software-oriented approach. FPGA devices are often programmed using design tools evolved from hardware-centric techniques. The different approaches and levels of abstraction make it difficult to combine the two technologies. The joint solution made possible by today’s agreement from Sundance and Celoxica uses C-based ESL tools. These enable system optimizations employing a comprehensive array of off-the-shelf modules and systems to address the critical issues of hardware/software co-design, DSP/FPGA integration, power utilization and cost reductions from design conception through to deployment.

"System designers commonly choose between DSP for signal processing systems and FPGAs to implement complex algorithms and signal processing systems," said Phil Bishop, president and CEO of Celoxica. "Combined they can offer a compelling solution for optimization of power, performance and flexibility. The key to unlocking this potential is providing design ease-of-use from both the DSP and FPGA perspectives."

"Many of our customers have already moved to model-based design and IP reuse to help streamline design and boost productivity," said Flemming Christensen, managing director of Sundance. "With more and more effort now being placed on value-added IP and customization inside a mixed DSP/FPGA system, the addition of C-based design that tackles complex algorithm development in hardware and software is inevitable."

The result of this partnership is the development of algorithm acceleration solutions for vertical applications. These include C-based IP modules, optimized FPGA hardware accelerators, and reference board prototypes built on Sundance boards programmed using Celoxica software tools. The companies will initially focus their efforts on software-defined radio (SDR) and complex image processing, and will begin rolling out solutions in Q4/05 at the Global Signal Processing Expo (GSPx) in Santa Clara.

"With this improved design flow for DSP plus FPGA based systems, customers can more easily integrate the performance of TI DSP with FPGA based co-processors," explained Ram Sathappan, SDR business development manager, Texas instruments. "C-based design and synthesis for hardware and software in DSP/ FPGA based COTS systems will address the needs of a wide range of designers."

"Xilinx and our Alliance Program members are seeing increasing market acceptance of our FPGAs for a broad range of DSP applications. We are gratified that Celoxica and Sundance have combined their expertise to make DSP development more accessible to design engineers to further accelerate this growth." said Robert Bielby, Xilinx senior director for vertical markets and partnerships.

About Sundance
Sundance designs, develops, manufactures and markets high performance signal processing and reconfigurable systems for original equipment manufacturers in the wireless and signal processing markets. Leveraging its multiprocessor expertise and experience, Sundance provides OEMs with modular DSP and FPGA-based systems as well as data acquisition, I/O, communication and interconnectivity products that are essential to multiprocessor systems where scalability and performance are vital. With over fifty different modules and carriers for PCI, cPCI VME and stand-alone platforms, Sundance is a solution provider to semiconductor, pharmaceutical and factory automation industries. The company was founded in 1989 by the current directors, is a member of the TI Third Party Network, Xilinx Xperts and MathWorks' Connection programs. For more information visit: www.sundance.com.

About Celoxica
An innovator in Electronic System Level (ESL) design, Celoxica is turning software into silicon by supplying the design tools, boards, IP and services that enable the next generation of advanced electronic product design. Celoxica technology raises design abstraction to the algorithm level, accelerating productivity and lowering risk and costs by generating semiconductor hardware directly from C-based software descriptions. Adding to a growing installed base, Celoxica provides the world's most widely used C-based behavioral design and synthesis solutions to companies developing semiconductor products in markets such as consumer electronics, defense and aerospace, automotive, industrial and security. For more information visit: www.celoxica.com.

More information in UK:
Justin Wheatley, Systems Manager, Sundance Multiprocessor Technology Ltd
Chiltern House, Waterside, CHESHAM, Bucks HP5 1PS
Tel. +44 (0)1494 793167 Fax. +44 (0)1494 793168
Web: www.sundance.com E-mail: e-mail protected from spam bots

High res image can be downloaded from: www.clickintopr.com/editors/articleDetail.asp?pjID=218

Posted by Industrial-Manufacturing at 09:45 AM | Comments (0)

AIRcable™ HiFi Bluetooth Headset for Hands-Free, Wireless Enjoyment of Streaming Music

Wireless Cables, Inc. has announced the release of its AIRcable HiFi Headset, which lets users listen to streaming music from their PCs via a wireless Bluetooth® USB "blade" that requires no setup or installation. The lightweight, cable-free and hands-free design provides maximum comfort for office workers, travelers, or home users who want to tune into their personal music or videos. In addition, the AIRcable HiFi Headset serves double-duty as a convenient cell phone headset.

(PRWEB) September 23, 2005 -- Wireless Cables, Inc. has announced the release of its AIRcable HiFi Headset, which lets users listen to streaming music from their PCs via a wireless Bluetooth® USB "blade" that requires no setup or installation. The lightweight, cable-free and hands-free design provides maximum comfort for office workers, travelers, or home users who want to tune into their personal music or videos. In addition, the AIRcable HiFi Headset serves double-duty as a convenient cell phone headset.

The attractive, sporty headset is truly a "plug-and-play" wireless accessory that is compatible with computers running Microsoft® Windows® 2000 XP, Apple® Macintosh® Mac OS®, and Linux. Bluetooth software is embedded in the hardware, the USB blade. Users simply plug the blade into the USB port, and the device appears as a new speaker set on their desktops. The AIRcable HiFi Headset gives users immediate access to music and videos, and even acts as a mobile phone headset with its built-in microphone. The device can also be set to receive incoming calls automatically or manually while the user is listening to music. The headset works as an audio headset with two new Samsung cell phones—Samsung SGH-i300 and Samsung SGH-D600 models—which support the MP3 audio player and Bluetooth A2DP. These innovative and versatile new mobile phones can be used as music players, complete with stereo.

Headsets have become a commonplace phenomenon in the corporate environment. In cubicle environments where phone conversations, hallway chat, and the clacking of keyboards can prove distracting, many corporate professionals wear headsets and listen to music while they work. Many workers claim that wearing a headset and listening to their favorite tunes helps their concentration and focus. Music has been an accepted part of Silicon Valley culture for many years. Some companies, like Yahoo, even provide their employees with headsets. The AIRcable HiFi Headset provides office workers with all the benefits of increased productivity, entertainment, and freedom of movement—with a device that does require installation of Bluetooth software on the users' PCs.

"Our goal as a company has always been to solve real-world customer problems—the often complex, messy, and time-consuming installation of cable devices and even most Bluetooth devices. We offer you true freedom—the freedom to listen to music, the freedom to receive calls from your cell phone, the freedom to move around your space. We call it no-fuss, instant wireless connectivity. Our unique technology embeds Bluetooth digital wireless software directly into the USB blade so the user is not required to do anything except plug it in and play the music they want to hear. It can't be any easier than this," says CEO Dr. Jürgen G. Kienhöfer.

The AIRcable HiFi Headset, which normally retails for $199.00 is available for a limited time for $149.00. It can be purchased at online at www.aircables.net.
Features
* Streams music from your PC instantly
* Works with any A2DP (Advanced Audio Distribution Profile) music source that distributes high quality music content such as MP3 files
* No software to install
* Simple-to-use 5-way control button
* Mobile phone headset/stereo audio functionality (stereo audio compatible with Samsung SGH-i300and the Samsung SGH-D600 cell phones)
* Switches to mobile phone mode automatically or manually when calls come in
* Rechargeable long-lasting Lithium-Polymer battery
* Comfortable, light-weight headband
* Compatible with Microsoft Windows 2000, XP; Mac OS; and Linux

About Wireless Cables, Inc.
Wireless Cables, Inc. manufactures plug-and-play Bluetooth-based wireless accessories for PDAs, laptops, and wireless serial and USB cable replacements. Our AIRcable products eliminate the inconvenience and cost associated with connecting cable devices or most Bluetooth devices. No wireless connection software or knowledge of Bluetooth is required on the part of the user because the software resides in our hardware. We offer a wide range of products—from our newly released wireless headset to cable replacements, making Bluetooth connectivity available on a wide range of devices. Through our unique patented technology, we've eliminated the complexities of software setup and device configuration, making AIRcable the most flexible, powerful and cost-effective Bluetooth-Serial product on the market today. In addition to point-to-point, cable mode connection, AIRcable can also be configured to provide Bluetooth service to other devices and can automatically locate other Bluetooth devices. Wireless Cables also provides custom product development for OEMs who wish to integrate AIRcable technology into their devices.

Wireless Cables, Inc. is based in Santa Cruz, California.

Additional information on Wireless Cables, Inc. can be found at www.aircables.net

© 2005 Wireless Cables Inc. All Rights Reserved. Wireless Cables, Inc., Santa Cruz, California, U.S.A. AIRcable is a trademark of Wireless Cables. All other company, product, and brand names are trademarks of their respective owners.

Posted by Industrial-Manufacturing at 09:44 AM | Comments (0)

VitalCom Marketing and Public Relations Opens New Office in Texas

VitalCom Marketing and Public Relations, today announced the opening of its "Silicon Hills” office in Texas. The new office, headed by Joe Basques, account manager at VitalCom, will support the agency's existing and future clients in the Austin area.

Austin, TX (PRWEB) September 23, 2005 -- VitalCom Marketing and Public Relations, today announced the opening of its "Silicon Hills” office in Texas. The new office, headed by Joe Basques, account manager at VitalCom, will support the agency's existing and future clients in the Austin area.

The new office, based in Cedar Park in the Austin metroplex will focus on providing strategic development and execution of editorial and analyst relations programs and trade show support to the growing number of emerging and innovative technology companies in the American Southwest. The office will also actively support VitalCom PR's current Austin-based clients Nascentric and Celoxica.

“Silicon Hills companies are crucial to the tech recovery in the United States," said Lou Covey, principal director of VitalCom. "We have a responsibility to support our current client base with feet on the ground in their home turf as well as serve the interests of innovative technology companies in the area.”

“Small and mid-sized private companies emerging in this economy need affordable and proven public relations strategy and results,” added Basques. "VitalCom's worldwide connections provide that without the costs of a big-named agency."

About VitalCom Marketing and PR

Founded in 1993, VitalCom Marketing and Public is a member of the Millenium Group and international network of public relations agencies specializing in high-tech public relations counsel and marketing communications services to fast-growing technology companies. VitalCom clients currently provide products and services in the electronic design automation (EDA), semiconductor, and embedded technology industries.

Posted by Industrial-Manufacturing at 09:43 AM | Comments (0)

New LIfe for NiCad Rechargeable Batteries

There is a process to Resurrect your NiCad batteries made by Bosch, Craftsman, Ryobi, Black and Decker, Milwaukee, Makita, Dewalt, and Panasonic to make them charge again and give you the full power of their potential.

(PRWEB) September 23, 2005 -- Don't throw away your power tools because the batteries are weak or dead. Now there is a process to Resurrect your NiCad batteries made by Bosch, Craftsman, Ryobi, Black and Decker, Milwaukee, Makita, Dewalt, and Panasonic to make them charge again and give you the full power of their potential.

Of course you're skeptical, but visit our website and read the list of testimonials from internet buyers and also the HUNDREDS of comments from Ebay buyers.

THIS REALLY WORKS! Take a minute to check it out and see for yourself unless, of course, you don't have any NiCad rechargeable batteries.

This is an easy process and if you have a volt meter then you only need a few household items and you're ready to go. Just read what others are saying at
http://resurrection.uniquedynamics.com

You can be saving big $$$ by getting new life from your NiCad battteries.

Posted by Industrial-Manufacturing at 09:41 AM | Comments (0)

E-CONTROL SYSTEMS, INC. to Present Handheld Devices (PDA) for Data Logging of HACCP Control Points Integrated into Raptor Web Software™ (RWS™), at the NAFEM Show

E-Control Systems to present its New Handheld devices(PDA) for data logging of HACCP Control Points and automated inventory management integrated into Raptor Web Software™ (RWS™) at the NAFEM show in Anaheim, CA 23-25 September 2005.

Chatsworth, CA (PRWEB) September 23, 2005 -- E-Control Systems, Inc., a trusted leader of hardware and software products for the foodservice industry's Online Kitchen and HACCP control, presents newly integrated PDA into its RWS™ – Enterprise-wide software solutions for the foodservice industry and the commercial kitchen, including schools, hospitals, restaurants, supermarkets, convenience stores and hotels.

E-Control Systems will be showing the new PDA at the NAFEM Show in Anaheim, CA 23-25 of September 2005 (Booth #2908 in the Technology Pavilion).

E-Control Systems has helped introduce, in the past years, the NAFEM Data Protocol with major industry partners and has now close to a thousand installations, all NAFEM Data Protocol Compliant. Raptor Web Software™ (RWS™) has become the de facto NAFEM Data protocol compliant software used by major foodservice manufacturers.

The newly integrated device helps making RWS™ the ultimate, Nafem Data Protocol compliant software solution for the commercial kitchen. With one software application from E-Control Systems, foodservice consultants and majors foodservice operators can make sure that any equipment in the kitchen is monitored through the same software platform.

E-Control Systems, the leader in Automated HACCP systems, with hundreds of installations nationwide recently announced a program that allows Schools Districts to immediately automate HACCP in all their Schools – Getting the Manual version of E Control Systems Software at no charge.
This program will help School district to meet The USDA Food and Nutrition Service (FNS) Mandated guidance on implementing a food safety system in schools by the end of School year 2005/2006
More details about this program are available on "weblink to our manual Haccp press release".

Other products developed and presented by E-Control Systems at the NAFEM Show include:
* New E-Control Systems Worksite that includes: Preventive Maintenance and Scheduling, Work Order Generation and Management, Project management and Scheduling, Information Sharing, Energy management and Energy Conservation.
* Picogate™ – Tiny Ethernet Gateway
* Microgate™ – Ethernet Concentrator Gateway
* Meshed Network and Wifi Wireless Sensors Integrated into Raptor Web Software™ (RWS™)
* Networked Event Driven Camera and DVR integrated into Raptor Web Software™ (RWS™)
* Networked Power Meters Integrated into Raptor Web Software™ (RWS™)
* Handheld devices(PDA) for data logging of HACCP Control Points and automated inventory management integrated into Raptor Web Software™ (RWS™)
* Hazard Notification to remote devices including E-Mail/Blackberry/PDA Reports On Demand
* NAFEM Data Protocol Integration Services
* Automated Cooking and HACCP control Integration for OEMs
* Automated Cooking and HACCP Management Software

About E-Control Systems, Inc.
E-Control Systems, Inc. is the leader for NAFEM Data Protocol compliant hardware and software for the food service industry. Its enterprise management and information software allows easy integration, automation, and HACCP control of any size restaurant or commercial kitchen. Its scalable architecture and SQL compliant database makes this system useful in single location, 10-location, or 10,000-location installations. E-Control Systems' hardware and software are used in much commercial equipment for the food service industry including walk-in coolers and freezers, reach-ins, under-counters, grills, fryers, ice machines, washers, and many more. These integrated solutions leverage state-of-the-art technologies and innovative practices to enhance performance, profitability, and competitive advantage. To learn more about E-Control Systems, Inc. and how we can help you, please visit us online at www.eControlSystems.com

E-Control System Contact:

Tommy Orpaz
Vice President Business Development
Tel: (818) 885-5228
Chatsworth, CA 91311
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 09:41 AM | Comments (0)

Allied Electronics Releases 2006 Catalog

Featuring over 135,000 electronic and electromechanical products, the new Allied Catalog is a resource for engineers and purchasers due to its broad range of available technology solutions

Fort Worth, TX (PRWEB) September 23, 2005 -- Allied Electronics, a subsidiary of Electrocomponents plc (LSE: ECM), released its 2006 catalog featuring 1,936 pages of electronic and electromechanical products from 300+ world-class manufacturers this month.

The latest catalog features over 135,000 products within 30 sections, all in stock and available for same day shipping. With almost 20,000 new products, a better page layout and more product images and relevant data, the latest Allied catalog will help engineers and purchasers find the parts even easier than ever before.

The catalog also includes a completely redesigned semiconductor section with a complete index by technology for quick reference and new pages that focus on Allied’s franchise semi-lines. As in previous years, the Allied catalog includes its exclusive manufacturers’ part number index.

Allied distributes over 550,000 catalogs annually. With more than 300,000 parts online and more than 135,000 products in the Allied Catalog, engineers and purchasers often look to Allied for prototyping due to its broad range of available technology solutions.

For information on Allied Electronics or to request your free 2006 catalog, visit: www.alliedelec.com.

About Allied Electronics
Allied Electronics’ headquarters are located in Fort Worth, Texas with 57 sales branches across the United States and Canada. Allied is a subsidiary of Electrocomponents plc (LSE: ECM), the world leading catalog component distributor. Electrocomponents has operations in six continents and headquarters in Oxford, England. For more information, visit www.alliedelec.com.

CONTACT:
Roxanne Martinez, Marketing Campaign Manager
817-595-8566

Posted by Industrial-Manufacturing at 09:39 AM | Comments (0)

BT Logics, Inc. "Memory Pointer" for Sale in U.S.

BT Logics, Inc. prepares for sale of it's "Memory Pointer" in the U.S. The Memory Pointer is a remote with a built in laser pointer, used to control Powerpoint presentations. It comes with a 128 MB Flash Memory Stick.

(PRWEB) September 23, 2005 -- BT Logics Inc., has announced that their new product, the “Memory Pointer,” is now available for sale in the U.S. market.

The “Memory Pointer” is designed to eliminate the inefficiencies that are common in many MS PowerPoint presentations, such as miscommunication between presenter and assistant, and slide show fumbles and mishaps. The Memory Pointer serves as a remote, allowing the presenter to control the presentation without an assistant to toggle the slides, and carries a laser pointer for quick referencing as well. In addition the Memory Pointer comes with a 128MB flash memory stick, where presenters can store and access their presentation, or immediately transfer it to the presenting PC.

BT Logics CEO Dr. Bryan Lee states, “Anybody who has given a MS PowerPoint presentation has felt the frustration from the technical annoyances inherent in trying to run the presentation. Our new Memory Pointer offers near total control of the presentation in one absolute solution.”

BT Logics, Inc. is a venture company established in 1997 and located in San Jose, California, the heart of Silicon Valley. BT Logics has been selected as a Promising IT Venture Company by the Ministry of Information Communication Korea. For more information on BT Logics, please visit www.btlogics.com, or call (408) 519-5791.

Posted by Industrial-Manufacturing at 09:39 AM | Comments (0)

September 22, 2005

Amzer® Unveils Collection of Five Premium Leather Cases for iPod nano

Exclusive black leather case collection is now available.

Alexandria, Virginia (PRWEB) September 22, 2005 -- While other accessory manufacturers are claiming to be first-to-market with iPod nano products, Amzer®, which begin its productions long back, has already churned out a whole range of enhancements. Today, the Collection of Five Premium Black Leather Cases is announced, available now exclusively on www.iPodstreet.com. Pallavi Dinesh, a spokesperson for iPodstreet.com says, “The cases are launched just in time, given that we’ve seen a huge demand for accessories for the super-slim nano. We’ve already sold over 20,000 Nanowraps and Nano Tubes, since their release last week. I encourage people to visit the website and see for themselves our entire range of iPod nano products.”

Classic and simple in design, these new cases are made of soft, supple leather, and there’s something for everyone to choose from. Each case sells for $34.95.

Nano Horizontal Encased
A side-loading nano case with sleek style with metal closures. This cushioned leather case helps to keep your nano safe and protects it round-the-clock.

Nano Bifold Leather Encased
Wallet-style case for your dear nano provides complete protection. Keeps your nano totally encased.

Nano Thong
Show off your wild side in a black leather thong. Perfect for making a statement while keeping your nano in place.

Nano Jacket
Understated classic style in soft leather, this stylish and fitted black leather jacket provides solid protection against dirt and scratches.

Nano Jacket w/Trim
A little bit of pizzazz to the ordinary nano jacket, this one comes trimmed with hand stitching detail for those who want to stand out just a little bit.

About Amzer®

Amzer® is a fast evolving technology and enhancements leader in communication products for mobile consumers across the globe. Amzer® products, including SmartPhone and MP3 accessories, are currently available exclusively through Moftware retail sites.

About iPodstreet.com

iPodstreet.com is owned by Moftware, a multinational company, and the innovator of many internet retailers offering mobile and MP3 enhancements. Headquartered out of Virginia, Moftware’s mission is to provide high quality products at unbeatable prices to consumers so they don’t have to deal with the hassle of comparison shopping.

Posted by Industrial-Manufacturing at 07:12 AM | Comments (0)

Smart Box Design Rolls Out Farkle, the Classic Dice Game, for Windows Mobile Handhelds and Adds New Features to Palm OS Version

Smart Box Design announces the release of its Farkle dice game for Windows Mobile devices and a free update for Palm OS users.

Seattle (PRWEB via MobilityNewswire) September 22, 2005 -- Smart Box Design is pleased to announce the release of its Farkle dice game for Windows Mobile devices and a free update for Palm OS users. Like most games of chance and skill, Farkle's attraction stems from players hoping to beat the odds and roll a high scoring combination. Farkle, which earned rave reviews by journalists and gamers alike after its Palm OS launch, will now provide users of both major PDA and smartphone platforms the chance to enjoy this classic dice game whenever and wherever they want.

Farkle is an enormously popular game throughout the world. Players roll a set of six dice for points and can continue rolling the dice as long as their roll continues to yield points. Any non-scoring roll is called a Farkle and the player forfeits their turn and any points accumulated during that turn. Players must gauge the risk of rolling again after setting aside scoring dice and decide whether to "bank" their points or risk them for a potentially higher score.

Farkle offers players an opportunity to challenge friends or compete against a variety of "intelligent" computer opponents with a wide range of personalities—from cautious to daring—that will determine the level of risk each opponent is willing to take when deciding just how far to push their luck.

The "artificial intelligence" of the Farkle opponents was praised by PC World Magazine in its review of the game. The reviewer enjoyed being able to select from a number of AI opponents, each employing a different level of risk in its game-playing strategies.

The just-released Windows Mobile and Palm version offers a new game variation: players cannot pass to the next player if they choose to keep all of the dice as rolled. This additional variation adds a new strategy to the game by having the user consider the benefit of keeping all the dice and chancing another roll (and therefore a possible Farkle) or keeping fewer dice with a lower score and passing.

"We have been thrilled by the response to our WordPop! game from the Windows Mobile market, and we're excited to deliver another title to that platform," said Todd Sherman, president of Smart Box Design. "Farkle is unlike any other game being released for Pocket PCs, and those who are looking for something different to play will enjoy Farkle."

A free trial version is available at http://www.smartboxdesign.com/farkleppc.html It can be purchased for US$14.95.

About Smart Box Design
Smart Box Design LLC, based in Seattle, Washington, was formed in 2003 by game industry veterans who share a common vision of creating exciting high-quality casual games for mobile users. Smart Box Design licenses, develops, and publishes games for Palm OS and Pocket PC / Windows Mobile Powered handheld devices and phones. The company's games include WordPop!, Triples, Farkle Dice, and Word Watch. For more information about the company, visit www.smartboxdesign.com.

The names of actual companies and products mentioned herein may be the trademarks of their respective owners.

Contact: Kevin Doel, TalonPR, Inc.
Phone: 785-273-9660

Posted by Industrial-Manufacturing at 07:11 AM | Comments (0)

International Traffic Expert Matthew 'Chipmunk' Sclier joins the team of ICANN accredited domain registrar Moniker.com

Leading ICANN accredited domain registrar continues to build expertise in domain name sales and traffic monetization.

(PRWEB) September 22, 2005 -- Moniker, one of the fastest growing ICANN accredited domain registrars, is proud to announce that Matthew "Chipmunk" Sclier, international domain name traffic monetization, affiliate marketing, and domain registration expert, is joining their domain name sales and traffic monetization team.

"Moniker has experienced rapid growth, recently entering the top 15 ICANN accredited domain registrars." said Monte Cahn, CEO of Moniker.com, "The addition of Matthew Sclier brings to our team a wealth of knowledge and know-how on international traffic monetization and domain name management. With over 8 years experience in advertising, marketing, retail sales and customer relations, Matthew was the obvious choice to add to the domain name sales team."

With an extensive background in marketing and sales for Cyberservices B.V. , Tutor Time Child Care/Learning Centers / Childtime Learning Centers and Sprint PCS, "Chipmunk" as he is known online, maintained a reputation as being highly knowledgeable and courteous, providing a high level of customer. Chipmunk explained that, "I found that as a rep, being courteous to everyone, regardless of their domain traffic is of utmost importance. There have been many webmasters that are just starting out that I have spent time with that now own a large portfolio of domain names and make a great deal of money."

Matthew has written a number of articles advising webmasters on how to expand their businesses internationally, and plans to add his international traffic monetization skills to Moniker's domain name sales team. Webmasters and domainers can meet Matthew out on the domain conferences and on webmaster forums, as he will be an active presence for this leading ICANN accredited domain registrar.

About Moniker:
Moniker is one of the top three fastest growing ICANN accredited domain registrars, and is the global leader for domain name services, including domain name sales, domain traffic monetization, and domain name registration. Together with its affiliated companies, Coolhandle.com, a web hosting company, and DomainSystems.com, a leader in domain name purchase, domain escrow and aftermarket services, the company manages more than 1,000,000 domains for companies, organizations and individuals, and offers industry leading security and personalized customer service for all of its clients. Moniker clients include The National Hockey League, Lions Gate Films, Jupitermedia, www.tengoldenrules.com , eCorp.com, Marchex, Kanoodle, Future Media Architects, Primus Telecommunications, AOL, Bank of America, and many others.

Posted by Industrial-Manufacturing at 07:10 AM | Comments (0)

Exkate Proves Legitimacy with Remote-Control Patent

Bay Area powerboard maker only one with ‘functional’ wireless remote.

(PRWEB) September 22, 2005 -- For more than five years, Exkate, maker of the legendary X-24 electric skateboard, has successfully defended its patent on the world’s only functional, hands-free remote electronics for its popular line of powerboards, including the affordable Raptor line.

The Bay Area enterprise has prevailed over several “fly by night operators” by obtaining judgments against the rival powerboard manufacturers.

Exkate’s X-24, Raptor 3.0, and Raptor 4.0 set the standard for high-tech electric skateboards. These boards feature powerful motors, regenerative braking, and easy recharge from any standard wall outlet. The cruising range of more than 10 miles and a speed of 15-20 mph make zipping around town easy and practical, and each board has enough power to pull a full-sized adult up steep hills. As an added bonus, the Raptor line is also highly portable – these boards are small enough to fit into a locker and light enough to carry into any public place.

Oakland-based Slide4less, LLC (www.slide4less.com) is an exclusive distributor of high-quality Exkate products. Now, the company is re-dedicating itself to selling the wireless, hands-free remote control boards. “We test every board we sell and Exkate’s wireless trigger remote is the one we prefer,” said Slide4less partner Darren Romar. “We are so confident the boards will perform that we offer a 30-day money-back guarantee on every one we sell.”

“The Raptor line of boards is being referred to as a revolution because of their affordability and high performance,” Romar added. “Never before could you buy a powerboard with wireless remote and regenerative braking for less than $500.”

Powerboards are also one of the most environmentally friendly vehicles available on the market, with strikingly silent operation and zero emissions. It is snowboarding with no lift line, wakeboarding without a boat and skateboarding without your feet ever touching the ground. You just step on and accelerate.

With the Raptor motors specially built to suit the powerboard, riders can reach top speed in less than four seconds. The longboard truck eliminates speed wobble while providing for a 10-foot turning radius, and the specially formulated bushings absorb road shock while the rider remains in firm control via the wireless hand controller.

The standard Exkate Raptor 4.0 ($499) and 3.0 ($399), along with the X-24 ($999)Wholesale Inquiries welcome (510) 832-2824. Consumers can also visit the showroom and take a free powerboard test ride at 212 International Blvd., (rear warehouse, off Second Avenue) in Oakland.

WARNING: These electric skateboards are high-speed, extreme machines and should be operated with extreme care and common sense. Overhead high-voltage wires can interfere with operation under certain circumstances. We recommend operation in a wide-open area with limited-to-zero signal interference. Motorized skateboards are illegal on many public roads. Owners of these boards assume all risks of operation including, but not limited to, injury or death. Helmet, gloves, and leathers are highly recommended.

Posted by Industrial-Manufacturing at 07:08 AM | Comments (0)

Combating Peak Oil with Sunshine and Aluminium

T Ray Deal, futurist author of 'Unlimited Energy,' reveals how the world will use Sunlight and Aluminium as a fuel to provide renewable energy in the near future.

(PRWEB) September 22, 2005 -- There are two major ways of using sunlight. The first is by direct conversion into electricity with solar panels and either transmission where distance permits, or by conversion into a renewable fuel.

The second use of sunlight is to heat up very large areas similar to greenhouses and use the hot air produced. The hot air then rises up a chimney and drives turbines which produce electricity.

Countries with hot deserts are the ideal sites for making renewable fuels. Large area, low cost panels are already in an advanced stage of development. As oil is depleted investment will replace oil production with renewable energy products. Such countries are usually free from Mother Nature producing Hurricanes such as Rita.

The Australian Solar Tower project, already being financed, will provide electricity for 200,000 homes from one such site. Google...Solar Tower Australia... This site has a video of how the tower works.

Such a chimney would also provide water for desert islands and clear air in cities suffering from long term pollution. The book ‘Unlimited Energy’ details how.

Renewable fuels have always been thought of as Hydrogen based, but transport and safety is a major problem. Aluminum is currently used as an explosion enhancer and is being developed as a rocket fuel and bio-fuel enhancer. The next stage is to use it as renewable fuel.

Electricity from sunlight is the means of recycling aluminium with no carbon cost to the Planet. Shipping to countries via boat is easy and existing oil tankers can be converted.

Volume for volume, aluminium gives off twice as much heat as oil when burnt in oxygen, with no pollution, and burns fiercely. Oxygen can be easily be made with machines already in use by the steel industry or collected from the recycling process. The resultant oxide can then be recycled back to aluminium.

When there is low flight activity the weather changes. Finding a way of reducing the effects of aircraft double glazing the world with their flight trails is still a long way off. Until then it is essential to use aircraft that are efficient.

...Napoleon served food for his honored guests on Aluminium whilst the less favored ate off pure Gold...A Roman Emperor is said to have killed the only man to make Aluminum from clay in fear that it would devalue his store of gold...

...Dubai, the Gold Capital of the Middle East, has just completed a large investment in Aluminium production in India... Just as oil companies are now merging, also look for Aluminium companies doing the same thing... PRNs may be a good indicator of investment potential...

T Ray Deal

‘Unlimited Energy’ Sci Fi for women and men is available from all on-line stores and please don’t forget to use your walk-in store.

Authors site www.tridi.com
Tel No. is for iUniverse orders

Posted by Industrial-Manufacturing at 07:08 AM | Comments (0)

September 21, 2005

eFlyte Opens Singapore Office to Support their Asia Pacific Customer Base

eFlyte, Inc. announces the opening of an office in Singapore to better service an expanding list of airline clients in the Asia Pacific region.

(PRWEB via PR Web Direct) September 21, 2005 -- eFlyte, Inc., a leading company specializing in inflight games and applications design and development, is pleased to announce the opening of an office in Singapore to better service an expanding list of airline clients in the Asia Pacific region. The office will commence operation on September 12, 2005 with a deployment of design, software engineering and marketing support in this new office facility.

David Morgan, CEO of eFlyte commented, "The opening of our Singapore office will allow us to better service our rapidly growing customer base. It's encouraging to get this exceptional team together and see the efforts of many months finally come to fruition. This is just the beginning of our global expansion."

"Singapore offers a unique combination of a highly trained workforce, business friendly environment, and strategic location. We're delighted to make this move," said Dan Harris, President of eFlyte.

Darrel Chua, who heads the new office as CEO of eFlyte Asia Pacific, is a veteran of both Singapore Airlines and Panasonic Avionics Systems. Darrel commented on the eFlyte Singapore office, "It is great to have the strong support from eFlyte in the US, while the Asia Pacific office works closely to our customers in the region. With the opening of this facility, the airlines can expect faster response and improved customer support. This should help to fuel more growth in our business. We also want to develop regional partnerships to bring more innovative products to market. We are preparing for the phenomenal growth in this region, particularly now that we have added inflight gambling to our product portfolio."

The new office of eFlyte Asia Pacific is located at:

Darrel Chua, CEO
eFlyte Asia Pacific Pte. Ltd.
506 Chai Chee Lane, #08-49
FirstLink Center
Singapore 417657
Singapore
Email: dchua @ eflyte.com
Phone: +65 6511 6744
Fax: +65 6244 3772

eFlyte is dedicated to the development, implementation and operation of inflight entertainment products and services with a growing portfolio of inflight software that includes messaging, destination guides, games and 3D technology. The company has recently announced its latest product, a low stakes inflight gambling system.

For additional information please contact Gordon Stevenson at +1.904.448.8758 or gstevenson @ eflyte.com.

Posted by Industrial-Manufacturing at 11:43 PM | Comments (0)

eFlyte Announces New Game Partnerships

eFlyte announces that it has partnered with a number of leading Internet and independent game design companies.

Jacksonville, FL (PRWEB via PR Web Direct) September 21, 2005 -- In continuing a commitment to maintain their leading edge status and provide airlines with the very latest game designs and entertainment options, eFlyte have partnered with a number of leading Internet and independent game design companies.

In total, some five strategic alliances have been formed with such renowned companies as PopCap Games, Mumbo Jumbo and Garage Games. These agreements give eFlyte the opportunity to exclusively offer airlines such leading game titles as Bejeweled 2, Rocket Bowl, Feeding Frenzy and Luxor -- currently the #1 downloaded game on the Internet.

"The objective of these alliances," said David Morgan, CEO of eFlyte, "is to provide our airline clients around the world with a constantly evolving library of professional caliber games which match the very best available through retail or on the Internet from major services like Yahoo! Games and MSN Game Zone -- games that are played by tens of thousands of people a day from around the world. This expansion of our product portfolio will ensure that passengers are playing the very newest releases and the hottest games available."

By this move, eFlyte intends to augment their own design and development resources while ensuring long term access to the finest game design talent in the world.

eFlyte will eventually add over 50 games to their existing portfolio by way of these agreements. Some of the new games that have been the first result of this collaboration include a number of 2D and 3D titles such as Chuzzle, Heavy Weapon, Ultraball, Chainz, Mutant Storm and Think Tanks. The combined team is currently working on a number of new titles to be launched throughout the year.

Ron Dimant, Managing Director of Mumbo Jumbo and United Developers, said that he was extremely pleased with the early results of this venture. "eFlyte has proven themselves to be an extremely capable partner. We evaluated several possibilities to enter this exciting new market and selected eFlyte due to their experience and reputation within both the IFE and game development industries."

eFlyte is dedicated to the development, implementation and operation of inflight entertainment products and services with a growing portfolio of inflight software that includes messaging, destination guides, games and 3D technology. The company has recently announced its latest product, a low stakes inflight gambling system.

For additional information please contact Gordon Stevenson at +1.904.448.8758 or gstevenson @ eflyte.com.

Posted by Industrial-Manufacturing at 11:42 PM | Comments (0)

VoIPSupply.com Offers Leasing and Technical Education Programs -- Programs Complement VoIPSupply.com's Extensive Suite of Services and Solutions

VoIPSupply.com (www.voipsupply.com), the largest single source for Voice over IP (VoIP) telephony equipment, has announced new technical education and leasing programs to complement its reseller service offering, which already includes provisioning, logistical support and other services.

Buffalo, NY (PRWEB) September 21, 2005 -- VoIPSupply.com (www.voipsupply.com), the largest single source for Voice over IP (VoIP) telephony equipment, has announced two new programs to assist resellers in growing sales and profitability. The company will offer technical education and leasing programs to complement its reseller service offering, which already includes provisioning, logistical support and other services.

VoIPSupply.com offers the technical education program through a partnership agreement with Global Knowledge, the largest privately held provider of training, enterprise learning services, and software solutions for information technology (IT) and management professionals. This partnership will provide customers with 15% discount on educational classes and certification courses.

"Education is the key to successful solution selling," said Mike Vasko, Director of Marketing for VoIPSupply.com. "We are helping resellers affordably access technical education from the leader in this field, Global Knowledge."

The leasing program, offered through Wells Fargo Financial Services, provides numerous advantages for VoIPSupply's resellers:
* Drastically reduced up-front costs – made possible by low- or no-down payment options
* No obligation to own equipment – Customer decides whether to purchase the product or simply walk away
* Helps overcome end user budget constraints
* Gets the end users on a product refresh cycle in line with the lease.

All of these advantages translate into increased cash flow (see attached backgrounder document).

"VoIPSupply.com has led the industry with end-to-end services to match our comprehensive catalog of products," said Benjamin P. Sayers, CEO of VoIPSupply.com. "We have remained ahead of the curve with provisioning and fulfillment services, system configuration, and logistical services. The new leasing and technical education programs are two more tools that will help our resellers succeed in this fast-moving industry."

VoIPSupply.com has forged numerous strategic partnerships, enabling the company to solidify its leadership position in the IP telephony market space. The company represents every major VoIP manufacturer, and it has provided value added services such as provisioning and fulfillment since 2004 – far in advance of its nearest competitors.

About VoIPSupply.com
VoIPSupply.com (www.voipsupply.com) is the largest single source for Voice over IP products and service. In addition to a comprehensive selection of IP phones, networking equipment and software platforms, the company offers its resellers provisioning and fulfillment, custom configuration, technical support, extended warranties and logistical services for end-to-end telephony solutions. VoIPSupply.com's sales consultants, technicians and engineers are available for expert advice and superior customer care by calling 1.800.398.VOIP or 716.630.1555.

Interviews & Information
For additional information on VoIPSupply.com or to schedule an interview with CEO Benjamin P. Sayers, please contact Christopher Greene at 716.250.3886 or by e-mail at e-mail protected from spam bots.

Posted by Industrial-Manufacturing at 11:41 PM | Comments (0)

E-Control Systems, Inc. Presents Networked Power Meters, Wireless Meshed Network Sensors, HACCP PDAs, All Integrated Into Raptor Web Software™ (RWS™), at the NAFEM Show

E-Control Systems to present networked power meters, wireless meshed network sensors, handheld devices(PDA) for data logging of HACCP Control Points and automated inventory management, Networked Event Driven Cameras and DVR will all be on display and integrated into Raptor Web Software™ (RWS™) at the NAFEM show in Anaheim, CA 23-25 September 2005

Chatsworth, CA (PRWEB) September 21, 2005 -- E-Control Systems, Inc., a trusted leader of hardware and software products for the foodservice industry's Online Kitchen and HACCP control, presents newly integrated devices into its RWS™ – Enterprise-wide software solutions for the foodservice industry and the commercial kitchen, including schools, hospitals, restaurants, supermarkets, convenience stores and hotels.

E-Control Systems will be showing these new solutions at the NAFEM Show in Anaheim, CA 23-25 of September 2005 (Booth #2908 in the Technology Pavilion).

E-Control Systems has helped introduce, in the past years, the NAFEM Data Protocol with major industry partners and has now close to a thousand installations, all NAFEM Data Protocol Compliant. Raptor Web Software™ (RWS™) has become the de facto NAFEM Data protocol compliant software used by major foodservice manufacturers. These devices can be hard wired or wirelessly connected. The wireless solutions provided are Wifi based and a new Meshed Network type will be presented by E-Control Systems at the NAFEM show.

The newly integrated devices and applications make RWS™ the ultimate, Nafem Data Protocol compliant software solution for the commercial kitchen. With one software application from E-Control Systems, foodservice consultants and majors foodservice operators can make sure that any equipment in the kitchen is monitored through the same software platform. The control of other non-cooking kitchen or restaurant related equipment such as cameras, power Meters, PDAs, bar code readers and printers can be monitored as well.

More and more equipment in the modern commercial kitchen will be web based or network controlled. E-Control Systems provides one easy to operate Enterprise-Wide application that handles all of this equipment. E-Control Systems provides OEMs and large Kitchen operations with NAFEM Data Protocol Integration Services, Automated Cooking, HACCP control Integration, and Automated Cooking solutions using their Raptor Web Software™ Enterprise Suite.

Other products developed and presented by E-Control Systems at the NAFEM Show include:

New E-Control Systems Worksite that includes: Preventive Maintenance and Scheduling, Work Order Generation and Management, Project management and Scheduling, Information Sharing, Energy management and Energy Conservation.
Picogate™ – Tiny Ethernet Gateway
Microgate™ – Ethernet Concentrator Gateway
Meshed Network and Wifi Wireless Sensors Integrated into Raptor Web Software™ (RWS™)
Networked Event Driven Camera and DVR integrated into Raptor Web Software™ (RWS™)
Networked Power Meters Integrated into Raptor Web Software™ (RWS™)
Handheld devices (PDA) for data logging of HACCP Control Points and automated inventory management integrated into Raptor Web Software™ (RWS™)
Hazard Notification to remote devices including E-Mail/Blackberry/PDA Reports On Demand
NAFEM Data Protocol Integration Services
Automated Cooking and HACCP control Integration for OEMs
Automated Cooking and HACCP Management Software

About E-Control Systems, Inc.:
E-Control Systems, Inc. is the emerging leader for NAFEM Data Protocol compliant hardware and software for the food service industry. Its enterprise management and information software allows easy integration and automation of any size restaurant or commercial kitchen. Its scalable architecture and SQL compliant database makes this system useful in single location, 10-location, or 10,000-location installations. Its software is used in many commercial equipment for the food service industry including walk-in coolers and freezers, reach-ins, under-counters, grills, fryers, ice machines, washers, and many more. These integrated solutions leverage state-of-the-art technologies and innovative practices to enhance performance, profitability, and competitive advantage. To learn more about E-Control Systems, Inc. and how we can help you, please visit us online at www.eControlSystems.com

E-Control System Contact:
Tommy Orpaz
Vice President Business Development
Tel: (818) 885-5228
Chatsworth, CA 91311

Posted by Industrial-Manufacturing at 11:40 PM | Comments (0)

Fujitsu Media Devices announces Compact AGPS/GPS Module for Mobile Devices

Frankfurt, Germany (PRWEB) September 21, 2005 -- Fujitsu Media Devices (FMD) and Fujitsu Microelectronics Europe (FME) are today introducing a new compact AGPS/GPS module suitable for mobile devices. The small size makes it ideal for incorporating within products such as mobile phones and other portable equipment, where it may be used under any network environment. Demo samples are currently available, with volume production planned for October 2005.

This ultra compact device of just 10.9mm × 9.1mm × 1.4mm, with a low power consumption of 180mW in Search mode, or 0.1mW in Deep Sleep mode (when TCXO is turned off), and high receiver sensitivity of under -150dBm, has been achieved through Fujitsu proprietary techniques in conjunction with e-Ride Inc., a leading provider of GPS/AGPS IP, AGPS servers and GPS reference networks.

In response to the rising demands for the inclusion of AGPS functions within mobile phones, Fujitsu Media Devices develops and offers AGPS modules for precisely this purpose. The company already designs and provides both Wireless LAN and Bluetooth Modules, and is particularly expert in the production of compact, low power modules for mobile devices.

This new GPS/AGPS device has been developed utilising the knowledge gained from FMD’s design & miniaturisation techniques for wireless modules. All components necessary for the GPS functions (including TCXO) are built-in.

The new module can operate in Autonomous, MS-Assisted (Mobile Station assisted) and MS Based (Mobile Station based) operating modes. It functions in the temperature range of -20°C to + 85°C.

This product will be supported in Europe by Fujitsu Microelectronics Europe and compliments Fujitsu’s existing portfolio of ASSPs for the AGPS marketplace, which already includes high sensitivity solutions for autonomous and assisted modes. For enquiries, please contact e-mail protected from spam bots.

About Fujitsu Microelectronics Europe
Fujitsu Microelectronics Europe (FME) is a major supplier of semiconductor and display products. The company provides advanced systems solutions to the automotive, digital TV, mobile telephony, networking and industrial markets. Engineers from design centres dedicated to microcontrollers, mixed-signal, wireless, FRAM, multimedia ICs and ASIC products work closely with FME's marketing and sales teams throughout Europe to help satisfy customers' system development requirements.

This solutions approach is supported by a broad range of advanced semiconductor devices, IP and building blocks as well as leading-edge Plasma Display Panels. For more information visit Fujitsu Microelectronics Europe's website at http://emea.fujitsu.com/microelectronics

About Fujitsu Media Devices
Fujitsu Media Devices (FMD) has established itself as a leading supplier of SAW filters and SAW duplexers and of voltage-controlled oscillators for mobile communication devices, by utilising unique high-density processing, high-frequency, and other technologies, and by taking advantage of the properties and capabilities of piezoelectric single crystals. FMD supplies mobile phone manufacturers around the world with various SAW devices for mobile communications, particularly those used in the RF circuits of mobile phones.

The demand for smaller and slimmer devices is particularly strong for use in modules and Fujitsu Media Devices has responded to this demand by reducing the thickness of the dual-filter SAW devices used for dual-band communications to the same thickness as single-filter devices (0.5mm)
FMD also offers small-size modules that comply with the W-LAN and Bluetooth international standards. In addition, the company is working to develop new fields (including automotive applications) by focusing on various sensors (angular rate, acceleration, and pressure) using new MEMS processing technology.

ISSUED ON BEHALF OF:

Fujitsu Microelectronics Europe
Am Siebenstein 6-10
D-63303 Dreieich -Buchschlag
Germany
Tel: +49-6103-690-0
Fax: +49-6103-690-122

Contact: Jim Bryant

MORE INFORMATION FROM:
JDK Marketing Communications
The Oasts, Charmans Farm
Beggars Lane
Westerham
Kent TN16 1QP

Tel: 0870 787 9510
Fax: 0870 787 9509

Contact: Joanna Muggeridge

Medium resolution pictures relevant to this press release can be found by following the links: ftp://ftp.jdk.co.uk/Fujitsu/Press/MRPR833.jpg

For high resolution download options please follow the links:
ftp://ftp.jdk.co.uk/Fujitsu/Press/HRPR833.zip

Posted by Industrial-Manufacturing at 11:40 PM | Comments (0)

Amzer® introduces a Lanyard Neckstrap Headset for iPod Shuffle

2 in 1 Lanyard Neckstrap Headset brings convenience and style for Shuffle users.

Alexandria, VA (PRWEB) September 21, 2005 -- Amzer®, a market leader in communication enhancements, introduces a Lanyard Neckstrap Headset for iPod Shuffle. This 2 in 1 headset combines amazing digital sound quality with practicality, style, and comfort, all put together for an incredible musical experience.

So, get rid of your tangled mess with separate lanyard and headset. The new Lanyard Neckstrap Headset is available exclusively on www.iPodstreet.com and retails for $29.95. The headset comes with one lanyard headset, one replacement iPod shuffle cap, one iPod shuffle cap with fastener hole, and one fastener.

Pallavi Dinesh, a representative for iPodstreet.com says that this product is a must-have for Shuffle owners. “We always keep the latest selection of high quality products on our website for iPod consumers while keeping the style factor in mind.”

© iPod is a trademark of Apple Computers and iPodstreet.com is a trademark of Moftware, LLC. All rights reserved.

About Amzer®

Amzer® is a fast evolving technology and enhancements leader in communication products for mobile consumers across the globe. Amzer® products, including Bluetooth and MP3 accessories are currently available exclusively through Moftware retail sites.

About Moftware

iPodstreet.com is owned by Moftware, a multinational company, and the innovator of many internet retailers offering mobile and MP3 enhancements. Headquartered out of Virginia, Moftware’s mission is to provide high quality products at unbeatable prices to consumers so they don’t have to deal with the hassle of comparison shopping.

Posted by Industrial-Manufacturing at 11:38 PM | Comments (0)

BT Logics, Inc. Launches "ProDix"

This month, BTLogics launched their new product, "ProDix," for sale in the US market. The ProDix is a 40GB 2.5 HDD with an enhanced digital multimedia player function.

(PRWEB) September 21, 2005 -- BT Logics Inc., has announced that their new product, the ProDix HDD DivX Player is now available for sale in the U.S. market.

ProDix is a 40GB 2.5 mobile external HDD with an enhanced function of a digital multimedia player. The HDD plays media files (movie files, music files) which can be downloaded from the internet, ripped from a CD/DVD, and more. The files are then transferred from the PC to ProDix, and then to any home entertainment system that is designed with a standard A/V outlet, allowing for instantaneous playback of media files from location to location. ProDix’s HDD capabilities eliminate the traditional yet cumbersome CDs required for transfer of media files.

BT Logics CEO Dr. Bryan Lee states, “I’m very happy to introduce this product for sale in the United States. ProDix is already doing very well in Korea and I hope that the market here in the US enjoys the capabilities offered by ProDix just as much.” For more information about ProDix, visit http://www.myprodix.com.

BT Logics, Inc. is a venture company established in 1997 and located in San Jose, California, the heart of Silicon Valley. BT Logics has been selected as a Promising IT Venture Company by the Ministry of Information Communication Korea. For more information on BT Logics, please visit http://www.btlogics.com, or call (408) 519-5791.

Posted by Industrial-Manufacturing at 11:38 PM | Comments (0)

September 20, 2005

New Portable College Security System Launches in September, National Campus Safety Awareness Month

Visonic's new AbbraCampus security system will help protect college students, who are most vulnerable to crimes both on and off campus during September. The AbbraCampus system is now available through Target.com.

(PRWEB via PR Web Direct) September 20, 2005 -- Visonic recently announced the launch of its latest security system, AbbraCampus, which is designed to protect college students from campus crime. This new product launch comes just in time for National Campus Safety Month.

It is widely recognized that college students are most vulnerable in September due to being more lax about their personal safety and security. Being forewarned is being forearmed and while we certainly don't want students to be fearful, having a deepened awareness of surroundings as well as learning simple things they can easily do in daily lives will raise the odds in their favor substantially.

As a result, raising safety awareness for all college students and families is our mission, our simple 10 step Campus Safety Brochure is a must read especially for all undergraduate students and parents. Did you know that 80 percent of all campus crime is perpetrated by students, and approximately 90 percent involve drugs and alcohol?

"I just feel so much safer now that I have this system, I don't worry about someone coming in when I'm studying or sleeping," said Adrianne Hooten, a junior at the University of Texas in Dallas.

The AbbraCampus security system is wireless so it sets up quickly and moves when you do so you'll be protected wherever you live. For a limited time, enjoy one year of professional monitoring with each system as well as free shipping through Target.com exclusively.

Help us help college students across our country be safer now. Thanks for helping us get this important message out; you just might help save a life.

World Leader in the Security Industry
Established in 1973, the Visonic Group has built a strong reputation as a world leader in the design, development, and manufacture of high quality systems and products for the security industry. With over 30 years of experience in every aspect of security, Visonic serves institutional, industrial, commercial and residential markets for both personal and property protection. The Visonic Group is recognized for its advanced patented technologies, reliable high performance systems, and responsive customer support worldwide. Visonic products are designed to comply with international standards and regulations and are approved for use by local authorities in most countries.

For more information on how college students can protect themselves with Visonic's AbbraCampus security system, please contact Deborah Lanore at 502.802.2215 ext 318 or visit www.visonic.com .

Media Contacts:
Deborah Lanore
Visonic Americas
800.223.0020 ext 318 (office)
502.802.2215 (cell)

Carli Armando
800.223.0020 ext 204

Posted by Industrial-Manufacturing at 10:01 AM | Comments (0)

Internet Marketing Agency Elixir Systems Announces New Client -- Worldwide Laser Services Corporation

Internet marketing agency Elixir Systems today announced a new client relationship with Worldwide Laser Services Corporation, a laser automation and integration specialist. Elixir will provide internet marketing services to increase Worldwide Lasert’s search related business.

Scottsdale, AZ (PRWEB) September 20, 2005 -- Internet marketing experts Elixir Systems, a leading provider of online marketing services including search engine optimization, paid search and online public relations, today announced an agreement with Worldwide Laser Services Corporation, a laser automation and integration specialist, to provide search engine marketing services to increase their online business.

Worldwide Laser founded in 1986 is a laser automation and integration specialist who's areas of expertise include new laser systems for laser marking, laser cutting, and laser drilling, They also provide new and refurbished parts for Co2 lasers and ND-YAG lasers as well as offering a laser repair service.

"Worldwide Laser is a growing company with customers on a national and international level" said Fionn Downhill, CEO of Elixir Systems. "They offer a specialized service and we aim to help them develop their web presence through a search strategy built to meet their needs. Our goal is to help them to develop their business and achieve world-wide recognition as the leading laser automation and integration specialists."

Elixir Systems are leaders in the field of internet marketing and offer customized strategies built around search engine optimization, paid search and online public relations. Elixir Systems is dedicated towards developing strong business partnerships and to delivering the highest possible levels of service. They aim to achieve long term results that have a true impact on their clients' business success.

Worldwide Laser was founded in 1986 and the company has evolved into a respected major laser marking systems manufacturer. They have also developed an impressive list of national and international service and parts clients. Worldwide Laser currently has active clients in ten countries on three continents. They have developed a major service organization for TEA CO2, CWCO2, and ND-YAG based laser marking products. They provide one of the largest inventories of spare parts in North America. Their own products include the LP2000 series, the LP9000 series of diode & flash lamp YAG lasers. Worldwide Laser has established a major laser marking job shop with TEA CO2, CWCO2, Diode, and flash lamp ND-YAG laser marking systems. For further information call (480) 892-8566 or visit their website http://www.wlsc.com

About Elixir Systems:
Elixir Systems is a full service, professional internet marketing agency that specializes in strategies to increase online business for their clients. Their experts develop strategies built around search engine optimization, paid search marketing and online public relations to help clients develop online business opportunities. Elixir Systems has offices in Scottsdale, Arizona. For more information, visit http://www.elixirsystems.com, or their Insights intoSearch for Business Blog http://seoblog.elixirsystems.com or call 480-889-5393.

Posted by Industrial-Manufacturing at 10:00 AM | Comments (0)

Lead-Free Reflow Soldering Is Focus of Free Web Seminar, Oct. 20, from Speedline Technologies

As the electronics industry continues the transition to lead-free manufacturing, many questions continue to challenge manufacturers as they consider the required extensive, and often expensive – changes in their production processes. Questions in the reflow soldering process involve decisions about equipment and process changes to considerations necessary to optimize the lead-free process. To help, experts from Speedline Technologies will address the issues involved in a free, live, Web seminar, titled "Lead-Free Reflow Soldering," on Thursday, October 20, from 11 a.m. to noon, EST. To register, visit http://www.speedlinetech.com/seminars

FRANKLIN, MASSACHUSETTS (PRWEB) September 20, 2005 -- As the electronics industry continues the transition to lead-free manufacturing, many questions continue to challenge manufacturers as they consider the required extensive, and often expensive – changes in their production processes. Questions in the reflow soldering process involve decisions about equipment and process changes to considerations necessary to optimize the lead-free process.

To help, experts from Speedline Technologies will address the issues involved in a free, live, Web seminar, titled "Lead-Free Reflow Soldering," on Thursday, October 20th, from 11 a.m. to noon, EST. Topics will include:

* Reflow equipment configurations and differences
* Producing lead-free assemblies
* Nitrogen process variables
* Cooling considerations
* Cost of operation

A Questions & Answers discussion will be included.

For more information, and to register, visit http://www.speedlinetech.com/seminars or call 1-508-541-4749.

Future free, live Web seminars – all scheduled at from 11 a.m. to noon, EST include:

* Thurs., Nov. 17: Tin Whiskers
* Thurs., Dec. 15: Fine Pitch Printing

About Speedline Technologies
Speedline Technologies is the global leader in process knowledge and expertise for the PCB assembly and semiconductor industries. Based in Franklin, Massachusetts, U.S.A., the company markets five best-in-class brands — Accel microelectronics cleaning equipment; Camalot dispensing systems; Electrovert wave soldering, reflow soldering, and cleaning equipment; MPM stencil and screen printing systems; and Protect global services, support, and training solutions. Speedline was named as the "2005 Surface Mount Technology Company of the Year" by Frost & Sullivan.
For more information, visit http://www.speedlinetech.com or contact Speedline at:

* USA: Speedline Technologies, 16 Forge Park, Franklin, MA 02038 USA, Tel: 1-508-520-0083, Fax: 1-508-520-2288, E-mail: e-mail protected from spam bots;
* Europe: Speedline Technologies GmbH, Im Gefierth 14, 63303 Dreieich, Germany, Tel: +49 (0)6103/832-0, Fax: +49(0)6103/832-299, E-mail: e-mail protected from spam bots;
* Asia: Speedline Technologies Asia Pte Ltd, 150 Kampong Ampat, #05-08 KA Centre, Singapore 368324, Tel: 65-6286-6635, Fax: 65-6289-9411, E-mail: e-mail protected from spam bots.

Posted by Industrial-Manufacturing at 09:59 AM | Comments (0)

New High Powered Lasers

Laserex has recently developed a high powered TEC laser module.

(PRWEB) September 20, 2005 -- The TEC laser module is suitable for use in bioinstrumentation, particle counting, fluorescence, machine vision as well as R&D and OEM applications.

The TEC is a highly stable, easy to use laser. The unit includes a high quality thermoelectric cooler and internal fan for maintaining the laser diode at a fixed temperature, even in demanding temperature environments. This along with using high quality anti-reflective coated optics and high speed modulation ensures that mode hopping is practically eliminated.

The TEC laser can be set for a CW output, internal 155MHz square wave modulation, or with external 10kHz burst mode. By modulating the laser at high frequencies, it is possible to reduce mode hopping. When the laser is initially switched on, it has a multimode output. As intensity increases, a single mode uses up the gain medium and suppresses the other modes. Changes in power or temperature can cause a single mode to hop to another mode. This does not occur with a multimode output. Therefore, to achieve maximum stability, the laser is modulated at 155MHz, to keep its output in multimode. An external TTL 10kHz signal can be applied to give bursts of CW or 155MHz pulses.

Posted by Industrial-Manufacturing at 09:57 AM | Comments (0)

Xterprise Becomes Zebra Technologies Premier RFID Solution Provider

Xterprise passes Zebra Technologies’ criteria for special reseller designation.

DALLAS (PRWEB) September 20, 2005 -- Xterprise Incorporated, a leading solutions provider for the "RFID Enabled Supply Chain," announces that it has earned the premier certification for RFID printer resellers, dubbed “RFID Solution Provider” from Zebra Technologies, a world leader in delivering on-demand printing solutions for business and process improvement, and a pioneer and leading provider of radio frequency identification (RFID) products.

To become an authorized Zebra Technologies RFID Solution Provider, candidates must have an established track record in delivering RFID services to end users, demonstrating that RFID solutions are either the main or a chief focus of their business strategy. In addition, RFID Solution Providers must have invested in key assets to enable them to deliver a total RFID solution to end users. To that end, authorized Zebra RFID Solution Providers must participate in RFID standards organizations, have completed Zebra’s specialized in-depth training program, demonstrate solid technical proficiency, and provide dedicated RFID integration resources.

Authorized Zebra RFID Solution Providers are fully qualified to sell, install, and service Zebra's line of industry-leading RFID printers/encoders as part of the total solution they provide. Zebra’s authorization program also allows participants to receive priority access to Zebra RFID training and forums, technical support, and other incentives targeted towards increasing market share and revenue.

"After doing thorough research into the various RFID printer solutions, we found that the Zebra product design, support capabilities and RFID label offerings were the right solutions for our customers and prospects," stated Steve Hall, senior vice president of global sales for Xterprise. "In addition, Zebra’s printer applicators have become the standard for our automated print and apply solutions in our XARM™ family."

"We are excited to welcome Xterprise as one of Zebra’s authorized RFID Solution Providers," said Bob Cornick, vice president and general manager of RFID for Zebra. "Our goal is to ensure that Zebra partners around the world are fully trained and authorized to supply and support complete RFID products and solutions in their markets. Given the current demands for knowledgeable providers and the complexity of RFID technology, it is critical that our customers work with top caliber channel partners who have a solid track record in assisting companies in the selection, implementation, and deployment of RFID systems for their supply chain initiatives."

Xterprise Incorporated was founded as an RFID focused solutions provider. Its scalable suite of RFID compliance solutions has been designed by working with some of the top CPG manufacturers in the world. With over 30 successful compliance installations, their XARM series now feature printer/encoders from Zebra Technologies that will enable manufacturers under compliance mandates to encode EPC imbedded labels and apply them to cases and pallets in both manual and automated application solutions. As the current retailer mandates for EPC labels continues to increase in both stores.

Posted by Industrial-Manufacturing at 09:57 AM | Comments (0)

September 19, 2005

First Presidential Webcast, 'Online Town Hall With President William Jefferson Clinton,' Now Part of Clinton Presidential Library

The first presidential Webcast, held by President Bill Clinton on November, 8, 1999, is now the first bona fide Internet-age broadcast in a Presidential library. The first presidential internet broadcast, produced and directed by Marc Scarpa, was billed as an "Online Town Hall Meeting" ushering in 'The New Politics of the Information Age'".

NEW YORK --- The first presidential Webcast, held by President Bill Clinton on November, 8, 1999, is now the first bona fide Internet-age broadcast in a Presidential library.

Produced and directed by Marc Scarpa, for the former Excite@Home network under the direction of the Democrat Leadership Council (DLC), the first presidential internet broadcast was billed as an "Online Town Hall Meeting" ushering in 'The New Politics of the Information Age'". The event showcased some of the latest Webcast technology of the time and provided a look at how local, state, and federal officials could use the Internet as a direct tool in shaping the dialogue between voters and politicians. The historical broadcast has been included in the permanent collection of the Clinton Presidential Library, which opened on November 18, 2004 in Little Rock, Arkansas.

The Clinton Town Hall chat enabled viewers to send in questions and watch the proceedings simultaneously. Billed as a 21st-century version of Franklin Delano Roosevelt's fireside chats, the Clinton Town Hall event has stood the test of time, as a model for real-time political communication with voters and political constituents. Featuring the lofty title "Third Way Politics in the Information Age," during which the participants would "engage in an online discussion on the common values and priorities of progressive Third Way politics in the Information Age," the chat was held on a Monday evening, from 7:00-8:30 pm EST, and was accessible through Excite's Web site.

Clinton was joined by DLC leader Al From, who hosted the event at George Washington University. Remote feeds connected New Democrat leaders (some of them just recently-elected), including Kathleen Kennedy Townsend, then Lt. Governor of Maryland; Donald T. Cunningham, Jr., then mayor of Bethlehem, PA; Wisconsin State Rep. Antonio Riley; Ron Gonzales, then mayor of San Jose, and Jeanne Shaheen, then governor of New Hampshire.

Remote crews in Bethlehem, PA; San Jose, CA, and Annapolis, Maryland connected, respectively, Mayor Cunningham; Mayor Gonzales, along with Netscape co-founder Marc Andreeson, and Lt. Governor Townsend all using IP-enabled technologies. No traditional broadcast technology was used in this event aside from cameras, lighting and microphones. The remote feeds were brought to George Washington University using web enabled audio conferencing technology and video streaming. There were an additional four cameras at the live shoot that enabled Scarpa to cut respectively between the President Clinton, Mr. From or remotely to any of the New Democrat leaders, all in real time via the internet.

Users at home were empowered to watch the "directors cut" of the live program or any of the remote feeds independently using Windows Media Player streaming technology while simultaneously submitting real-time questions to the president through a video-enabled chat room on the Excite@home network. Any Internet user could simply log on to the Webcast through their Web browser and participate at any time during the 90-minute live event. Further, the Internet broadcast was seen partially live on TV news networks such as CNN, MSNBC, NBC and others during the event as the networks reported on the story. This, in turn, encouraged more people to participate in the broadcast; as seeing it unfold on TV inspired them to go their computers and participate directly.

"This was a major production; you have to realize this was the first time a President had decided to communicate with the general public using a very early technology in order to do so, video over the Internet. In addition, there were several remotes (video feeds) to manage in conjunction with the main venue at George Washington University, which was loaded with Secret Service, his aides, a live studio audience and the world watching - all making for a very tense real-time event," said Scarpa. "Needless to say, this event was ahead of its time and with our very professional, experienced crew working behind the scenes, we together made it a success."

Shot using four studio cameras, six remote cameras and using eight microphones for the speakers, the Town Hall event was hosted brilliantly by DLC chairman Al From who relayed questions to Clinton from a chat room monitor, who responded on video. In many instances the President would point at this monitor to choose his own questions making for a fun and engaging experience for him as well. The web voice chat technology, which enabled participants to speak with others in separate chat rooms, had been part of Excite's Web portal for several months, ensuring robust performance.

"In many respects, the event was much easier to produce than some of the live online music concerts that I had directed in the late-'90s, including the Tibetan Freedom Concert series and Woodstock '99", said Scarpa, "but with this one we had several of the highest-profile public and private figures in the United States. Due to their visibility the success of this event aided in accelerating the Webcast genre as a legitimate medium"

The reaction to the broadcast was quite positive within political circles, which justified the Clinton administration's strong focus on promoting the Internet as a ubiquitous tool for public access to information and education. Not surprisingly, the Webcast made the most noise in Silicon Valley, where San Jose mayor Gonzales and Netscape founder Mark Andreeson were located.

Holly Page, vice president for strategy and innovation at the DLC, originally initiated the project with then Excite senior vice president of marketing Fred Siegel. They were thrilled to learn that the project had been preserved for the Clinton Library, "So much of the innovation via the Internet in the early and late 90's has been lost due to the nature of the medium. Its wonderful that the Library had the vision and foresight to preserve this important historical work, more museums and libraries around the world should also take a cue from their initiatives," said Page.

David E. Alsobrook, director of the Clinton Library, conveyed his enthusiasm for this piece of history in the museum through a written statement, "The 1999 online broadcast at George Washington University documents an historic demonstration of modern information technology in the service of progressive politics. More importantly, it provides a valuable visual record of President Clinton's long-standing commitment to technological innovation." He added, "I am confident that those researching the first president of the information age will find this contribution an invaluable resource."

"We are very pleased that the Clinton Presidential Library has selected the Town Hall chat for inclusion in its permanent collection," said Scarpa. "We hoped to capture what the near-term future would be for Internet broadcasting with it, and now that broadband penetration in the U.S. is at such a fast-growing pace, we believe that there will be an even brighter future for media communities."

Restoration was conducted personally by director Marc Scarpa at his digital broadcast facility with the financial support of Web pioneer Jeffrey Dachis (co-founder of Razorfish), who saw the work relevant to the overall historical arc of the Web itself. "With something like this, it's a no-brainer. The work that Marc had done in 1999 set the bar for the next generation of communication between a president and the general public, similar to that of the first televised broadcast of a president". He added, "With the timing of the Library opening and their ability to recognize the historical merits of this work, I was pleased and honored to be a part of this restoration. It's unfortunate that we do not see forward-thinking communications between government (Presidents) and the general public in today's political climate"

While the Clinton Town Hall chat was a singular event, it helped illuminate the Internet's role in the coming decade, in which political parties, political action groups, and candidates of all kinds could conduct meaningful communication, fundraising, and issue-shaping with their constituents. For elected officials, public Web sites are a mainstay of government today, and a means of maintaining a persistent face with the body politic.

For further information on the Clinton Town Hall online event or for copies of the work on DVD, please contact Chris Pfaff at c.pfaff @ att.net or 201-218-0262

About Clinton Library - www.clintonfoundation.org/cpc-index.htm
About DLC – www.dlc.org
About Marc Scarpa – www.marcscarpa.org/timeline

Excite is currently a property of Ask Jeeves, Inc.

Posted by Industrial-Manufacturing at 11:05 PM | Comments (0)

New SLAPPA PSP Storage Case

SLAPPA Distribution LLC., today announced the launch of its new SLAPPA® Playstation Portable (PSP) Storage case. The line, as described on SLAPPA’s website (www.slappa.com), combines highly tactile materials and a unique design focused on secure protection, this new PSP case is a must-have for any avid gamer-on-the-go.

(PRWEB) September 19, 2005 -- SLAPPA Distribution LLC., today announced the launch of its new SLAPPA® Playstation Portable (PSP) Storage case. The line, as described on SLAPPA’s website (www.slappa.com), combines highly tactile materials and a unique design focused on secure protection, this new PSP case is a must-have for any avid gamer-on-the-go.

The SLAPPA HardBody PSP Daily Case is designed to protect your PSP from the elements while maintaining a sleek, cutting-edge look. This case features the same xEVA material featured on the award winning CD and DVD case lines, as well as rainproof zippers with rubber SLAPPA zipper pulls, storage divider, cargo storage nets, Xtra-wide elastic band for ultra-secure PSP storage and super-soft lining. This case also features a D-ring with removable carabineer clip and an adjustable Velcro storage strap for multiple transport options.

"We believe the PSP is positioned to be a staying force in mobile digital devices, and as such we focused on making a case that PSP owners can trust to protect their investment over the long haul," says Dustin Garis, Director of Marketing for SLAPPA.

The SLAPPA HardBody PSP Daily storage case is now available for preorder for only $14.99 at www.slappa.com (MSRP $19.99). Product will ship September 20.

About SLAPPA Distribution LLC.
SLAPPA Distribution LLC. is a distributor of digital storage cases and accessories for digital products that are sold under the "SLAPPA" brand name. SLAPPA products have been recognized as "ground breaking" and "the best available," and can be found at retail outlets around the globe.
SLAPPA’s innovative team continues to produce quality style savvy designs for digital gear, such as CD/DVD storage cases. For more information on SLAPPA, visit the website at www.slappa.com.

Posted by Industrial-Manufacturing at 11:05 PM | Comments (0)

SchmartBoard Unveils SchmartBoard|ez At DEMOfall 2005

A ten year old can now do what 99% of electrical engineers could not-hand solder small IC's.

Fremont CA and Huntington Beach CA (PRWEB) September 19, 2005 -- SchmartBoard, a company that develops products for prototyping electronic circuits, unveiled today a new line of prototype boards called SchmartBoard|ez. The new product line makes it possible for virtually anyone to hand solder integrated circuits (ICs), even BGA (Ball Grid Array). Based on surveys of companies and universities, SchmartBoard believes that this product will have a huge impact for both industry and academia.

"I enjoyed the privilege of a hands on demonstration of SchmartBoard, including soldering a small IC," said Chris Shipley, executive producer of the DEMO conferences. "The design of this system is brilliantly simple. If I can quickly and easily solder components, I'm convinced that electrical engineers will see a significant productivity boost from this approach."

"Engineers have historically used prototyping boards to test circuits and avoid costly custom printed circuit board (PCB) revisions" said Andrew Yaung, SchmartBoard's CEO. "Prototyping boards have existed for a long time, but as surface mount components have become smaller and smaller, these boards have not kept up with the technology and have not remained a practical tool for most applications. Because of this, engineers are forced to use custom PCBs and can spend large amounts of time and money on revision after revision of expensive custom PCBs before they finally have the circuit perfected. By making prototyping boards viable again, SchmartBoard|ez will save companies a tremendous amount of time and money." In addition to this need for an easy prototyping tool, SchmartBoard|ez can be used as the circuit board in mass-produced technologies.

In discussions with universities, SchmartBoard has found that hand soldering components is also a hindrance in teaching electrical engineering. Universities want to focus on teaching theory, not soldering skills. The ability for students to hand solder is a significant hurdle especially on "senior projects" in which students are expected to create a working circuit in order to graduate. SchmartBoard expects that students will develop an interest in electronics at an earlier age due to SchmartBoard|ez technology.

Details on SchmartBoard|ez, including a three-minute flash video can be seen at www.schmartboard.com

About SchmartBoard
SchmartBoardM is committed to helping engineers, students, and hobbyists develop electronic circuits faster, easier, and less expensively than previously possible. At Schmartboard, our three-word mission statement is "Electronics for Everyone". More information is available at http://www.schmartboard.com

About DEMOfall 2005
The annual DEMO conferences focus on emerging technologies and new products, which are hand-selected from across the spectrum of the technology marketplace. The DEMO conferences have earned their reputation for consistently identifying tomorrow's cutting-edge technologies and have served as launch pad events for companies such as Palm, E*Trade, Handspring, and U.S. Robotics, helping them to secure funding, establish critical business relationships and influence early adopters. Each DEMO conference features approximately 70 new companies, products and technologies. For more information on the DEMO conferences, visit http://www.demo.com.

Posted by Industrial-Manufacturing at 11:03 PM | Comments (0)

Cooke's Innovative Lenses Capture 'Casanova' as This Fabled Romantic Strives to Discover the Real Meaning of Love

In “Casanova,” directed by Lasse Hallstrom, Cooke S4 Prime lenses capture the comedy, drama and romance of Heath Ledger (Casanova), Jeremy Irons (Pucci) and Sienna Miller (Francesca) in this new film, which is due out on December 25, 2005.

Hollywood, CA (PRWEB) September 19, 2005 -- Mention Casanova and what comes to mind? Soldier, spy, diplomat, writer, adventurer? More than likely, you’ll associate the name from his autobiography, which has established his reputation as the most famous erotic hero. Casanova’s memoirs are a fascinating but unreliable account of his adventures with 122 women – according to his own counts –but they also provide an intimate portrait of the manners and life in the 18th century.

Heath Ledger plays the fabled romantic – Giacomo Casanova - as a man who, after failing to win the affection of a particular Venetian woman, strives to discover the real meaning of love.

In “Casanova,” directed by Lasse Hallstrom, Cooke S4 Prime lenses capture the comedy, drama and romance of Heath Ledger (Casanova), Jeremy Irons (Pucci) and Sienna Miller (Francesca) in this new film, which is due out on December 25, 2005.

For over 23 years, Cinematographer Oliver Stapleton has worked on over 40 films. He used Cooke lenses extensively while filming Casanova and is currently working on The Hoax. The S4 design, winner of a technical Academy Award®, Emmy Award®, Cinec Award and Queens Awards, used by Stapleton, incorporates innovative features for superb control of flare, distortion, veiling glare and spherical aberrations at full aperture. The cam-type focus mechanism gives smoother focus adjustments and allows for better-spaced and clearer lens markings.

The S4 Primes include focal lengths of 14, 16, 18, 21, 25, 27, 32, 35, 40, 50, 65, 75, 100, 135mm and the recently introduced 180mm with a close focus of only 4’3.” In addition, all focal lengths are color balanced, achieving excellent contrast and resolution over the full Super 35 format. Cooke S4 Primes give excellent definition in low light or shadow and warm image under all external, arc, or fluorescent lighting and feature Cooke’s acclaimed multicoating, providing what’s known in the cine realm as the “Cooke Look” – a lush, velvety appearance with rich warm colors.

Cooke is a storied name in both cinemagraphic and the ultra-high-end professional photography markets. Known worldwide for their precision, exacting tolerances and superior quality, Cooke lenses are specified by many of the most renowned directors of photography and cinematographers in Hollywood. Cooke S4 Prime lenses, acclaimed for
their unique mechanical design and extraordinary photographic qualities, have been used to shoot several of the most renowned and visually beautiful motion pictures of all time, both in Hollywood and internationally. Other recent box office releases shot with Cooke lenses include Mr. & Mrs. Smith, Ray, Bridget Jones’s Diary, Chicago, Under the Tuscan Sun, Harry Potter and the Prisoner of Azkaban and the extraordinarily beautiful Girl With a Pearl Earring.

For more information about Cooke lenses, visit their website at www.cookeoptics.com

Posted by Industrial-Manufacturing at 11:02 PM | Comments (0)

Manfrotto Introduces New 351MVB2 Tripod - Also Available in Pro Video Kit Featuring 503 Fluid Video Head

503,351MVB2K Pro Video Aluminum kit is perfect complement to new HDV cameras.

Amsterdam, The Netherlands (PRWEB) September 19, 2005 -- Manfrotto, the world’s leading manufacturer of photographic and video support products, is now offering the 503,351MVB2K Pro Video Aluminum Kit, complete with all of the products and features in demand for the most popular video cameras on the market. The tripod kit includes a top tandem leg section, mid-level spreader, a 75mm bowl topped with a smooth pro fluid video head that all folds down to a small, convenient size and comes with padded bag.

Designed to support new HDV cameras, the 503 Pro Fluid Head supplied with the kit, can withstand payloads up to 8kg / 17.6 lbs

The light, but positive, fluid movement provides exceptionally smooth control. The new drag adjustment device is continuous, allowing very fine movement control and the smoothest possible pans and tilts. The head is also equipped with a built in balance spring to help to support the camera weight.

The kit can also be used with Manfrotto’s 522P and 523PRO remote pan bar controllers.

Manfrotto’s 351MVB2 is a lightweight, two-stage aluminum version of the popular 351MVCF tripod. The upper twin leg design and built-in shoulder spreader allows for greater rigidity and angle settings. The 351MVB2 is an extremely portable and light professional video tripod.

Manfrotto products are distributed exclusively by Bogen Imaging in the United States. For information, contact Bogen Imaging at 565 East Crescent Avenue, Ramsey, NJ 07446-0506.

About Manfrotto
Gruppo Manfrotto are world leaders in the manufacture of professional camera and lighting supports for photography, video, broadcast and entertainment. For 35 years, Manfrotto has been building the world’s widest range of tripods, heads and dedicated accessories to support professional and semi-professional still cameras, from the traditional small, medium and large format to the latest digital camera. Every product in the Manfrotto range is designed to provide a perfect combination of important features such as: load capacity, size, stability, transportability, interchangeability and construction quality – guaranteeing unique inimitable reliability and longevity.

About Bogen Imaging:
Since 1959, Bogen Imaging (formerly Bogen Photo) has been a leading source for photographic, cinematic and video lighting, supports, and accessories. Many of the most respected manufacturers of precision products for the photographic, video, Cine and lighting are distributed in the U.S. exclusively by Bogen. These include Manfrotto and Gitzo tripods and heads, Kata protective carrying systems and accessories, Avenger lighting grip, I.F.F. ceiling mounted lighting suspension, Metz on-camera flash systems, Gossen light meters, Elinchrom studio lighting systems and a wide host of additional product lines which round out the most complete range of exceptional accessories in the business.

Posted by Industrial-Manufacturing at 11:02 PM | Comments (0)

Manfrotto Introduces 524 Zoom Remote Control for Professional DV Cameras

New range of remote controls for Angenieux, Canon and Fujinon lenses.

Amsterdam, The Netherlands (PRWEB) September 19, 2005 -- Manfrotto, the world’s leading manufacturer of photographic and video support products, is introducing the 524 Zoom Remote Control, developed for the evolving professional ENG lens market.

The 524 range of remote controls includes the 524AX for Angenieux, the 524CN for Canon and the 524FN for Fujinon lenses. The 524 remote control features a professional thumb zoom wheel that comfortably fits the hand for fine adjustment and smooth zooming. The stepless zoom control speed dial allows shooting versatility, giving the user the ability to pre-select a zoom speed or change the zoom speed mid-shot.

The telescopic pan bar allows the user to choose the most comfortable working position for their needs. Also, the integration of the remote controller with the video head pan bar ensures a sturdy attachment and eliminates all compatibility and mechanical issues.

Using the same popular pan handle design of the 523PRO and 522P remotes, each of the 524 remote controls comes with a built-in 90 cm/35.4 in, 8-pin cable to automatically adapt to ENG lenses. An optional 10 cm/3.9 in 524ADPT adaptor cable is available for the 12-pin configuration found on some Fujinon lens models.

Manfrotto products are distributed exclusively by Bogen Imaging in the United States. For information, contact Bogen Imaging at 565 East Crescent Avenue, Ramsey, NJ 07446-0506.

About Manfrotto
Gruppo Manfrotto are world leaders in the manufacture of professional camera and lighting supports for photography, video, broadcast and entertainment. For 35 years, Manfrotto has been building the world’s widest range of tripods, heads and dedicated accessories to support professional and semi-professional still cameras, from the traditional small, medium and large format to the latest digital camera. Every product in the Manfrotto range is designed to provide a perfect combination of important features such as: load capacity, size, stability, transportability, interchangeability and construction quality – guaranteeing unique inimitable reliability and longevity.

About Bogen Imaging:
Since 1959, Bogen Imaging (formerly Bogen Photo) has been a leading source for photographic, cinematic and video lighting, supports, and accessories. Many of the most respected manufacturers of precision products for the photographic, video, Cine and lighting are distributed in the U.S. exclusively by Bogen. These include Manfrotto and Gitzo tripods and heads, Kata protective carrying systems and accessories, Avenger lighting grip, I.F.F. ceiling mounted lighting suspension, Metz on-camera flash systems, Gossen light meters, Elinchrom studio lighting systems and a wide host of additional product lines which round out the most complete range of exceptional accessories in the business.

Posted by Industrial-Manufacturing at 11:01 PM | Comments (0)

Manfrotto Introduces 526 Pro Fluid Video Head

Feature-packed fluid video head for heavy-duty, high-end video market.

Amsterdam, The Netherlands (PRWEB) September 19, 2005 -- Manfrotto, the world's leading manufacturer of photographic and video support products, is now offering the 526 Pro Fluid Video Head, which directly addresses the heavy-duty, high end ENG and EFP video market with a feature-packed fluid video head with the ability to support weight loads up to 16kg/35.3 pounds.

The 526 features Manfrotto's most precise fluid drag system, which is composed of three step settings for low to high drag levels. It also features a no-drag setting for snap-pans and tilts. The large rubber, padded knobs and the design – with all controls on the left side of the head – allow for ease of use.

Designed to support professional video cameras, the 526 Pro Fluid Video Head contains an adjustable spring for camera weights for counterbalance and a built-in 100mm half-ball for adaptability. The 526 also features a removable pan arm rosette, allowing for small and easy replacements in case of any damage to the side castings during normal use.

The 526 Pro Fluid Head is also available with the 350MVB tripod in a complete video kit. The 526MBVKIT offers professional versatility in an affordable kit. The tripod and head kit supports heavy ENG loads and comes equipped with a padded tripod bag for protection and travel convenience.

For more extreme weight loads and rock solid stability, the 526,528XBK is the ultimate tripod kit with all the benefits of the 526 head with the powerful heavy-duty 528XB tripod. The 528XB includes a quick-opening mid-level spreader and steel legs for greater durability.

Manfrotto products are distributed exclusively by Bogen Imaging in the United States. For information, contact Bogen Imaging at e-mail protected from spam bots or 565 East Crescent Avenue, Ramsey, NJ 07446-0506.

About Manfrotto
Gruppo Manfrotto are world leaders in the manufacture of professional camera and lighting supports for photography, video, broadcast and entertainment. For 35 years, Manfrotto has been building the world's widest range of tripods, heads and dedicated accessories to support professional and semi-professional still cameras, from the traditional small, medium and large format to the latest digital camera. Every product in the Manfrotto range is designed to provide a perfect combination of important features such as: load capacity, size, stability, transportability, interchangeability and construction quality – guaranteeing unique inimitable reliability and longevity.

About Bogen Imaging:
Since 1959, Bogen Imaging (formerly Bogen Photo) has been a leading source for photographic, cinematic and video lighting, supports, and accessories. Many of the most respected manufacturers of precision products for the photographic, video, Cine and lighting are distributed in the U.S. exclusively by Bogen. These include Manfrotto and Gitzo tripods and heads, Kata protective carrying systems and accessories, Avenger lighting grip, I.F.F. ceiling mounted lighting suspension, Metz on-camera flash systems, Gossen light meters, Elinchrom studio lighting systems and a wide host of additional product lines which round out the most complete range of exceptional accessories in the business.

Posted by Industrial-Manufacturing at 11:00 PM | Comments (0)

It's Better to Shoot With Both Hands on the Wheel

Manfrotto introduces revolutionary support system for the DV shooter.

Amsterdam, The Netherlands (PRWEB) September 19, 2005 -- At Manfrotto, ingenuity and innovation have long been the driving force behind the company’s ability to continuously develop cutting edge products that satisfy the rapidly evolving needs of videographers. The FIG RIG, which will be featured at IBC 2005, is a revolutionary support system for the new generation of DV cameras, demonstrates that ability, and furthermore reflects Manfrotto’s exceptional engineering and design capabilities.

From initial conception to finished product, Manfrotto worked alongside director Mike Figgis, whose films include Leaving Las Vegas and Cold Creek Manor, to develop a hand held DV camera support system that offers the shake-free stability of a tripod with the framing flexibility of handheld shooting. Respectively named for Figgis, the FIG RIG was the result of their collaborative efforts.

A lightweight, handheld camera stabilizer, the FIG RIG features a “wheel shaped” design. It is the only modular system in the world to smoothly support the DV camera and act as a frame to mount all accessories, including zoom controllers, mics, mixers, lights, monitors, arms and more. As there are no straps or harnesses attached to the FIG RIG, quick and wide movements can be made within the same shot, from ground level to overhead, in one smooth movement. With the FIG RIG, videographers can take their DV cameras beyond the limits of traditional and conventional systems, such as tripods and shoulder or body mounted supports, that are obtrusive and at times, limit the creativity of the shooter.

“I needed to design a piece of equipment that could be used with the new generation of DV cameras – something that could support the camera and eradicate the instability that is synonymous with small camera use,” said director, Mike Figgis. “Manfrotto seemed to be the ideal company to take it to. They have a world wide profile and a keen competitive ambition to be at the forefront of the new generation of film technique and innovation,” concluded Figgis.

The FIG RIG is exceptionally mobile and features numerous configurations, allowing the user to customize the setup per their individual preferences or shooting requirements. Several adapter plates are available for most types of cameras, and the FIG RIG is compatible with Manfrotto’s 521, 521PRO and 521P remote controls for Sony, Canon and Panasonic Mini DV and Hi8 cameras. The FIG RIG is also the only modular system in the world to smoothly support the DV camera and act as a frame to mount an array of accessories. Using the optional 595CLA FIG RIG Clamp, users can attach zoom controllers, mics, mixers, lights, monitors, arms and more, or even use the Clamp to attach the entire FIG RIG to a tripod or monopod. The 595CLA is specifically designed for use with the FIG RIG and is supplied with 1/4” and 3/8” screws and female adapters.

Key Features

1. Hand Pads – For a comfortable and secure grip even in the most extreme environments.
2. Crossbar – Each side of the camera bar is threaded with on ¼-20”, 3/8” and 5/8” hole for additional accessory mounting.
3. Sliding Quick Release Plate – Supplied with a 501PL sliding Quick Release Plate allowing you to position and balance your camera. The plate system can be switched out with a variety of Manfrotto plate assemblies to best match your camera.
4. Rubber Base Padding – A non-slip rubber pad provides stability when using the Fig Rig on a flat surface such as a table, floor or railing.
5. Cable Clips – Supplied with 4 cable clips to keep all your wires wrapped cleanly around the rig and out of your shot.

Manfrotto products are distributed exclusively by Bogen Imaging in the United States. For information, contact Bogen Imaging at 565 East Crescent Avenue, Ramsey, NJ 07446-0506.

About Manfrotto
Gruppo Manfrotto are world leaders in the manufacture of professional camera and lighting supports for photography, video, broadcast and entertainment. For 35 years, Manfrotto has been building the world’s widest range of tripods, heads and dedicated accessories to support professional and semi-professional still cameras, from the traditional small, medium and large format to the latest digital camera. Every product in the Manfrotto range is designed to provide a perfect combination of important features such as: load capacity, size, stability, transportability, interchangeability and construction quality – guaranteeing unique inimitable reliability and longevity.

About Bogen Imaging:
Since 1959, Bogen Imaging (formerly Bogen Photo) has been a leading source for photographic, cinematic and video lighting, supports, and accessories. Many of the most respected manufacturers of precision products for the photographic, video, Cine and lighting are distributed in the U.S. exclusively by Bogen. These include Manfrotto and Gitzo tripods and heads, Kata protective carrying systems and accessories, Avenger lighting grip, I.F.F. ceiling mounted lighting suspension, Metz on-camera flash systems, Gossen light meters, Elinchrom studio lighting systems and a wide host of additional product lines which round out the most complete range of exceptional accessories in the business.

Posted by Industrial-Manufacturing at 10:59 PM | Comments (0)

Longmont Area Economic Council Announces Annual Community Appreciation Award Winners; Longmont's outstanding corporate citizens honored

The Longmont Area Economic Council (LAEC) presented its annual Community Appreciation Awards on Wednesday, September 14th. Three local businesses were honored: Alpharma Animal Health, Melles Griot, and Mentor Graphics. Bayne Gibson was awarded the Tom Brock Award for his contributions to the economic success of the Longmont community. Keith Kanemoto of Prudential LTM Realtors was presented with the LAEC's President's Award.

Longmont, CO (PRWEB) September 19, 2005 -- The Longmont Area Economic Council (LAEC) presented its annual Community Appreciation Awards on Wednesday, September 14th at the Radisson Conference Center, 1850 Industrial Circle in Longmont. Three local businesses were honored: Alpharma Animal Health, Melles Griot, and Mentor Graphics. Bayne Gibson was awarded the Tom Brock Award for his contributions to the economic success of the Longmont community. Keith Kanemoto of Prudential LTM Realtors was presented with the LAEC's President's Award. Mike Landess, Anchor for Denver's Channel 7 News was Master of Ceremonies.

While each of the companies receiving awards support the Longmont community in many ways, they were each recognized for supporting a specific group. Alpharma was recognized for its support of the Foothills United Way Chapter (www.unitedwayfoothills.org). Casey Kingsley, site controller for the Alpharma, accepted on behalf of the company. Melles Griot was recognized for its support to the Our Center (www.ourcenter.org). Chris Zeitkiewitz is the site manager with Melles Griot, and accepted on behalf of his employer. Mentor Graphics was recognized for its contributions to the Longmont Theater Company (www.longmonttheatre.org). Dan Peters and Debbie Layton accepted on behalf of Mentor Graphics.

LAEC's Community Appreciation Luncheon is designed to honor Longmont-area primary employers that have demonstrated support for the community through their employee programs and donations to the charitable organizations that improve the quality of life for Longmont residents. This recognition is part of a comprehensive effort by the Longmont Area Economic Council to support existing industry, which includes 238 companies employing more than 13,000 people in the region.

Area businesses supporting this year's event included Platinum-level sponsors AMGEN, Centennial Bank, Longmont Power & Communications and Xilinx, and Gold-level sponsors Longmont United Hospital and Flatirons Bank.

About the Award Winners

Alpharma Animal Health
Alpharma Animal Health (www.alpharma.com/ahd/) is a global leader in the development, registration, manufacturing and marketing of pharmaceutical products and technologies for food-producing animals. Through prudent use, these various products maintain good health and support robust growth, enhance reproductive efficiency and treat disease in cattle, swine and poultry. They are integral health-management tools necessary to meet the world's growing demand for a safe, abundant and affordable food supply.

Melles Griot
Melles Griot (www.mellesgriot.com) supplies the elements used to create, control and position light for applications as diverse as biotechnology, semiconductor manufacturing, entertainment and reprographics. For 30 years, Melles Griot has taken a leadership role in supplying products that enable the practical application of light. As the photonics marketplace grew, so did the company, becoming a worldwide manufacturer and distributor of optics, lasers, opto-mechanical hardware and instruments. Working with industry, supporting research and development, partnering in OEM production – Melles Griot continues to lead the photonics industry.

Mentor Graphics
Mentor Graphics (www.mentor.com) is a technology leader in electronic design automation (EDA), providing software and hardware solutions that enable companies to develop better electronic products faster and more cost-effectively. The company offers innovative productions and solutions that help engineers overcome the design challenges they face in the increasingly complex worlds of board and chip design. Mentor Graphics has the broadest industry portfolio of best-in-class products, and is the only EDS company with an embedded software solution.

The Tom Brock Award
In the early 1960s, a number of business leaders got together to spur Longmont’s economic development through the establishment of an industrial park. What began as a grassroots effort to raise money for the park became a successful development that paid back investors with money left over to support the community. One of the founders of the industrial park board was Tom Brock, a business leader who helped build the Longmont-area economy and better the community. The award that bears his name was established in 1999 and recognizes these leadership qualities in a Longmont-area business person. The recipient of this award is chosen by a committee representing the former Longmont industrial park board. This year’s Tom Brock award winner is Bayne Gibson of Prudential LTM Realtors.

Gibson is active in area business and community organizations with more than 50 years of corporate sales, marketing and management experience. He works with Prudential LTM Realtors specializing in sales of raw land and leasing of office and industrial properties. Gibson is on the Magellan Center think tank Advisory Council and has served in the Boulder Chamber, the Denver Chamber, Longmont Area Economic Council Board as well as Girl Scouts and Boy Scout councils.

About the Longmont Area Economic Council
The Longmont Area Economic Council exists for the sole purpose of keeping the Longmont area economy strong. This is accomplished specifically by "actively supporting the creation and preservation of quality primary jobs." Primary employers are those who sell the majority of their goods and services outside the region. LAEC is a public/private partnership, governed by a Board of Directors made up of representatives from primary employers, the City of Longmont, and the business community at large. For more information, call (303) 651-0128, or visit www.longmont.org.

Posted by Industrial-Manufacturing at 10:58 PM | Comments (0)

Amzer® Announces a Tripod Speaker for iPod Nano

Amzer® announces a convenient and portable speaker for iPod Nano, also compatible with Shuffle and Mini.

Alexandria, VA (PRWEB) September 19, 2005 -- Amzer®, a leading manufacturer of iPod accessories, has launched a hot new Tripod Speaker for iPod Nano. Stylish and hip, the tripod is lightweight and very portable. And with no wires to worry about, it can turn your Nano into an instant surround sound music system wherever you are! While most speakers on the market today for iPods are bulky and non-compact, this device is the first of its kind to hit the market combining beautiful sound and portability. It takes an instant to put your Apple iPod device into the Tripod Speaker.

Priced at $69.95 the Tripod Speaker comes with a protection cap and requires only an AAA battery and operates for up to 10 hours. The speaker is also compatible with the Shuffle and Mini iPod models. Moftware is exclusively retailing this new speaker through their e-tail sites www.iPodstreet.com and www.Fommy.com.

Last week Amzer® launched an exclusive range of Nanowraps and Nano Tubes and will continue to unveil new accessories for the Nano in the weeks to come.

About Amzer®

Amzer® is a fast evolving technology and enhancements leader in communication products for mobile consumers across the globe. Amzer® products, including Bluetooth and MP3 accessories are currently available exclusively through Moftware retail sites.

About Moftware

iPodstreet.com and Fommy.com are owned by Moftware, a multinational company, and the innovator of many internet retailers offering mobile and MP3 enhancements. Headquartered out of Virginia, Moftware’s mission is to provide high quality products at unbeatable prices to consumers so they don’t have to deal with the hassle of comparison shopping.

Posted by Industrial-Manufacturing at 10:57 PM | Comments (0)

Callpod Technology Launches to the World at DEMOfall 2005

Chicago, Illinois. Callpod, Inc. has launched its patented and innovative Callpod™ technology at DEMOfall 2005.

Chicago, IL (PRWEB) September 19, 2005 -- Callpod, Inc. has launched its patented and innovative Callpod™ technology at DEMOfall 2005. Callpod was selected as one the 66 companies to launch its technology at the DEMO conference. Chris Shipley, DEMO executive producer, mentioned, “Callpod is one of the most simple and impressive new technologies I have seen in a long time. There are many products in the market today that can be greatly enhanced with this type of sharing application. Callpod has pioneered something that virtually everyone can use.”

What is Callpod Technology?

Callpod, Inc., founded by Darren Guccione, designed and patented a unique conferencing technology for cellular telephones, PDAs, MP3 players and notebook computers. As Guccione states, “It was designed to allow multiple users of a cell phone to share audio content such as phone calls, music and news. We are seeing the cell phone become a centralized media source for audio and video content. Callpod technology allows multiple users to connect their Bluetooth or tethered earpieces and share audio content or conduct a conference call from a single device without voice cancellation. The conference call is no longer relegated to boardrooms or third-party conferencing solutions -- you can now take it from the boardroom to the beach or on the way to the airport. We look forward to unveiling our technology to the world at DEMOfall.”

About DEMOfall 2005

The annual DEMO conferences focus on emerging technologies and new products, which are hand-selected from across the spectrum of the technology marketplace. The DEMO conferences have earned their reputation for consistently identifying tomorrow's cutting-edge technologies, and have served as launch pad events for companies such as Palm, E*Trade, Handspring and U.S. Robotics, helping them secure venture funding, establish critical business relationships and influence early adopters. Each DEMO conference features approximately 70 new companies, products and technologies. For more information on the DEMO conferences, visit www.demo.com.

About Callpod

Callpod Inc. licenses its unique conferencing technology to manufacturers of cellular and wireless accessory devices, wireless service providers and notebook computer manufacturers to provide customized sharing features for their end-users.

Callpod is a trademark of Callpod, Inc. All other company and product names mentioned are used only for identification and may be trademarks or registered trademarks of their respective companies.

Media Contact:
Darren Guccione
e-mail protected from spam bots
www,callpod.com
312-421-5780

Posted by Industrial-Manufacturing at 10:56 PM | Comments (0)

RMS, Montgomery County Police Partner to Help Seniors, Crime Victims and Those Hurt by Katrina

Under the partnership, funds will be raised and free emergency 911 cell phones will be provided.

OCALA, Fla. (PRWEB) September 18, 2005 -- RMS Communications Group Inc., a leading recycler and remarketer of old cell phones, announced today it will partner with the Montgomery County (Md.) Police Department to raise funds and provide free emergency cell phones for local crime victims and senior citizens.

The Montgomery County Police Department has collected old cellular phones for several years. But under the new agreement with RMS, the department will raise funds which will be managed by the Montgomery County Police Foundation. Those funds will support senior education and outreach efforts and will provide emergency 911 cell phones to crime victims and residents in need.

During the month of September, the department will give up the value of each phone it collects, and RMS will donate that amount plus $1 for each phone to the National Sheriff’s Association (NSA) Adopt-A-Cop program. That program is providing funds to law enforcement officers who are working in hurricane-affected areas and who have lost what they own due to hurricane and flood damage.

In addition, the Montgomery County Police Department has agreed to give up the emergency 911 phones that would be received from RMS in September and send them for use by survivors in the three states most affected by Hurricane Katrina.

Residents who have unused cell phones are encouraged to drop them off at any of the six Montgomery County Police district stations. The phones will then be mailed to RMS, which will evaluate each phone’s best use. High value phones will be converted to cash that will be sent to the Montgomery County Police Foundation. For each phone that is converted to cash, one working 911 cell phone will be donated to the Montgomery County Police by RMS.

Useable phones not converted to cash will be added to an inventory of 911 emergency phones. As a participating agency, the Montgomery County Police Department will have access to the inventory pool of 911 cell phones to benefit crime victims or citizens in need.

Unusable or damaged phones will be responsibly recycled by RMS according to strict environmental guidelines

About RMS Communications Group Inc.
Based in Ocala, Fla., RMS Communications Group Inc. provides consumers and businesses a convenient way to get cash for cell phones that otherwise lay idle. Phones may qualify regardless of manufacturer – Motorola, Nokia, LG, etc.; or service provider - Sprint, Verizon, Cingular, T-Mobile, etc. The company often partners with non-profit organizations that find the collection and sale of old cell phones to be an excellent source of revenue. More information can be found at http://www.RMSComm.com.

Posted by Industrial-Manufacturing at 10:53 PM | Comments (0)

Free Video Game Alert Notification Service and Price Watch For Consumers Enters Second Year

CE buys offers help to consumers looking to buy Microsoft’s Xbox 360 game console.

San Mateo, CA (PRWEB) September 18, 2005 -- CE Buys, is now taking sign-ups for its Xbox 360 Alert Notification Service mailing list. Subscribers are alerted when online merchants start taking pre-orders or when Xbox 360 items are in stock - consoles, games, and accessories. CE Buys is an affiliate partner of trusted online merchants including WalMart, Amazon.com, PCConnection, EBGames, GameStop, BestBuy and CircuitCity.

The Xbox 360 Price Watch (updated daily) compares the prices of the different bundled packages offered by online merchants.

The CE Buys web site provides comprehensive buying information on video games hardware, games (English & imported Japanese), accessories, and related news and resources.

"We launched our Alert Notification Service about two years ago with the free Nintendo DS™ and Sony PSP™ Alert Notification Services in October 2004 and February 2005 respectively. We now have well over 10,000 happy subscribers," said Nick Pang, President. "Our notification service alerted subscribers to online merchants that were taking Nintendo DS pre-orders for early Christmas 2004 delivery and Sony PSP pre-orders for Summer 2005 delivery. Consumers who do not pre-order online for the November 22, 2005 launch of the hottest game platform from Microsoft will unlikely be able to get it in their hands by Christmas Day 2005."

Consumers can sign up for the free Xbox 360 alert notification service at Xbox 360 Alerts.

About CE Buys, LLC
CE Buys, LLC a Delaware company, has operations located in the Bay Area of Northern California. CE Buys assist clients with Pay-Per-Click (PPC) advertising, search engine optimization (SEO) for natural search, and provide price comparisons information to consumers for making better shopping decisions.

Posted by Industrial-Manufacturing at 10:53 PM | Comments (0)

September 17, 2005

Fastrax Announces Availability of iTrax130 Development Kit for iSuite 3 SDK, Supporting Selected Sony Chipsets

Fastrax Ltd., a leading provider of open and portable OEM GPS Software Development Kit environments and programmable OEM GPS receivers, today announced the availability of the iTrax130 Development Kit for the iSuite™ 3 SDK. The new iTrax130 Development Kit adds support for selected Sony GPS chipsets to the iSuite 3 Software Development Kit.

Long Beach, CA (PRWEB) September 17, 2005 -- Fastrax Ltd., a leading provider of open and portable OEM GPS Software Development Kit environments and programmable OEM GPS receivers, today announced the availability of the iTrax130 Development Kit for the iSuite™ 3 SDK. The new iTrax130 Development Kit adds support for selected Sony GPS chipsets to the iSuite 3 Software Development Kit. Both the iSuite 3 Software Development Kit and the iTrax130 Development Kit have been licensed to Sony Corporation.

Fastrax iSuite technology is designed for rapid modification of the features and functionality of a GPS receiver, thus reducing the time to market and bill of materials cost of location-aware products. iSuite technology also enables remote on-the-fly reprogramming of GPS receiver firmware and application software. This can significantly decrease product maintenance costs and improve customer satisfaction.

With the announcement of the iTrax130 Development Kit, the iSuite 3 SDK becomes the only embedded GPS Software Development Kit available for multiple GPS chipset platforms. In addition to existing iTrax03 Development Kit for u-Nav Microelectronics GPS chipsets, iSuite SDK users now have several chipset options available for their application platform.

"We are very pleased to announce the new iTrax130 development kit for Sony-based GPS receivers. With multiple choices of software development kits for both iTrax03 and iTrax130 receiver families, the iSuite 3 SDK now provides even more powerful tools for embedded GPS application development," said Mr. Matti Räty, President/CEO, Fastrax.

Designed for high portability and easy application development, the iTrax130 Development Kit provides all the features of iSuite™ 3 software, in addition to full support for JTAG debugging. iTrax130 Development Kit users can utilize industrial-strength ARM® RealView Developer Suite and RealView® ICE development and debugging tools for efficient embedded software development.

The iTrax130 Development Kit for iSuite 3 SDK supports Sony CXD2951 and CXD2956+CXA3355 GPS chipsets and will be available by the end of 2005.

For more information on iSuite™ 3 SDK and iTrax Development Kits, please visit http://isuite.fastrax.fi

NOTE TO EDITORS: Fastrax is an exhibitor at the ION GNSS conference from September 14th to 16th 2005, at Long Beach Convention Center, Long Beach, CA (Booth #412/414).

Fastrax contact:
Mr. Matti Räty
President / CEO
Tel. +358 400 431 124

Fastrax agency contact:
Netprofile Tech PR
Juha Rantanen
Tel. +358 9 6812 080

About Fastrax Ltd
Fastrax provides industry-leading receivers and software solutions for optimal utilization of GPS (Global Positioning System) and other GNSS location services (Global Navigation Satellite Systems). Fastrax transforms GPS technologies into highly scalable iTrax and iSuite solutions with open interfaces, combined to ultra low power consumption and miniature hardware design. With industry-leading performance, Fastrax GPS receivers navigate continuously even in extreme conditions. Receivers are ideally suited to both industrial location applications and high-volume consumer products such as cell phones and sports accessories. Fastrax Engineering Services provide expert services in application design. Headquartered in Finland and founded in 1999, the company is privately owned and backed by leading venture capital investors CapMan, Eqvitec, Startupfactory and Innocap, with a strategic investment by Suunto Corporation, a subsidiary of Amer Sports Corporation, one of the world's leading sports equipment companies. More information: www.fastrax.fi.

Global Positioning System (GPS) is a worldwide satellite navigation infrastructure funded and controlled by the U.S. Department of Defense, originally developed for U.S. military purposes. GPS provides satellite signals that enable GPS receivers to calculate their exact position and velocity. The GPS infrastructure has three segments. The space segment consists of 24 satellites that orbit the earth every 12 hours. The control segment consists of tracking stations located around the world, with the master control station located at Falcon Air Force Base in Colorado. The user segment consists of GPS receivers and users utilizing the information provided by the system. GPS is widely used in applications such as marine navigation.

ARM® and RealView® are registered trademarks of ARM Limited. Sony is a registered trademark of Sony Corporation.

Posted by Industrial-Manufacturing at 01:21 AM | Comments (0)

Numark Introduces iDJ, First Ever DJ Mixer for the iPod

Numark Brings DJ Mixing to the Masses With This October's Hottest Product

Cumberland, RI (PRWEB) September 17, 2005 -- Numark Industries, a global leader in Disc Jockey (DJ) technology, proudly announces the first-ever iDJT Mixer for iPod® portable music players. The iDJ enables users to seamlessly integrate two iPods into a portable and user-friendly DJ system. With its sleek and cutting-edge design, Numark's iDJ is the perfect iPod companion that will transform any music lover into the life of the party.

Numark's ground-breaking iDJ is specifically designed to provide a simple and inviting "plug and play" approach to becoming a DJ. In addition to being an easy to use DJ Mixer, the iDJ also works as a basic playback device and dual charging/docking station.

Technical specifications include large navigation controls, lighted console, 3-band equalizer, and phono, line and USB inputs for maximum external connectivity. This full-featured mixer with dual iPod docking stations incorporates a microphone input and a headphone output to complete the mixing experience - also a perfect tool for creating Podcasts on the fly.

Consumer electronics retailers can now order this new technology, and it will be available to the public in October of 2005. According to Numark's CEO, Jack O'Donnell, "We couldn't be more excited to bring the art of DJing to the consumer market. Since almost everyone carries an iPod in their pocket, the new iDJ makes it easy to use their iPod as professional DJ gear."

Mr. O'Donnell continued, "For college students and other iPod enthusiasts, this compact mixing system is a natural extension of the iPod platform that makes enjoying music with others that much easier."

About Numark Industries
Numark Industries is the global leader of professional DJ and audio equipment, and is recognized for providing progressive breakthrough technology. Since 1971, Numark has designed and delivered innovative products and numerous music industry "firsts." For more information, visit www.numark.com.

iPod is a registered trademark of Apple Computer.

For a hi-res image of the iDJ Mixing Console for iPod go to:
http://numark.vwh.net/numark/numark2/images/mixers/scratch/iDJ.zip

Username: numarkftp
Password: fusion

Posted by Industrial-Manufacturing at 01:21 AM | Comments (0)

Sonion Launches World's Smallest Microphone

It's silicon, digital and with a tiny 3 cubic mm size- the new DigiSiMic fits perfectly into tomorrow's mobile phones, PDAs, and headsets.

Roskilde, Denmark (PRWEB via PR Web Direct) September 16, 2005 -- Sonion is proud to announce the launch of the DigiSiMic microphone, the world's smallest digital, silicon microphone. Sonion products, such as the DigiSiMic help mobile phone manufacturers design smaller, lighter products with cost in mind.

"After more than a decade of research, the DigiSiMic is a development breakthrough for the industry. It is a minute, feather light but still a very robust microphone that has stable high quality acoustic performance," said Jacob Philipsen, president of Sonion MEMS.

With a footprint of only 2.6 x 1.6 mm2 the DigiSiMic is ideal for applications where minimum microphone size is key.

As analogue electric condenser microphones (ECM) are the standard in today's mobile terminals with analogue silicon microphones emerging, the DigiSiMic represents a technological leap towards the fully digitalized mobile phone architectures of "tomorrow."

"The launch of the DigiSiMic allows Sonion to strengthen our position as a one-stop shop for mobile phone acoustical equipment as the company can now add advanced microphones to its range of speciality miniature audio receivers and loudspeaker," said Peter U. Scheel, CEO of Sonion.

The DigiSiMic, which is SMT compliant, integrates a microphone chip and an ASIC assembled onto a carrier chip to form a single pinhead-sized "all-silicon" component.

The microphone chip holds the acoustic sensor structure and the ASIC contains a bias-circuit, a low-noise pre-amplifier and a sigma-delta-based A/D converter. The output is a single-bit digital output stream that can be connected to downstream digital electronics for a high degree of flexibility and freedom. Acoustic performance of the DigiSiMic is equal to or better than today's conventional microphones.

An important benefit of the DigiSiMic is its reduced susceptibility to temperature and humidity, as well as its high immunity to electromagnetic interference (EMI). The closely integrated microphone and ASIC in a sealed, all-silicon chip scale package, dramatically reduces parasitic electrical elements, while the digital output eliminates EM interference for transmission over long distances. This allows product designers flexibility in the system design in e.g. a mobile phone, including the possibility to implement arrays of microphones for directionality or noise cancellation.

The DigiSiMic has been selected by one of the major mobile phone manufactures and is currently undergoing production ramp-up in Sonion's clean-room based production facility.

Key features and benefits of the DigiSiMic:
* Size, all silicon package and surface mountability – ease manufacturing costs and increase efficiency.
* Integrated Solution – Integrated microphone, analogue pre-amplifier and sigma-delta modulator reduce component count and board space, as well as RF/EM interference.
* High Suppression of RF and EM Interference – Digital output eliminates EM interference over long transmission distances, enabling microphone arrays that increase performance.
* Digitalization – Enables high performance microphone array applications.
* Left/Right feature enabling stereo application over a single data wire.

In addition to the DigiSiMic, Sonion is also launching the SiMic, the industry's smallest analogue microphone this week. The product brings an unparalleled level of performance and fidelity, including a typical signal-to-noise ratio of 61 dB in a previously unachievable small package size with a footprint of only 2.4 x 1.6 mm2.

For more information contact:
Sharmi Albrechtsen
Head of Corporate Communication, Sonion A/S
+45 7025 6510
e-mail protected from spam bots

Peter U. Scheel
President & CEO, Sonion A/S
Mobile phone: +45 4025 0974

Jørn Bjerregaard-Nielsen
Executive Vice President, Sonion A/S
Mobile phone: +45 2049 0884

Posted by Industrial-Manufacturing at 01:20 AM | Comments (0)

Motorola ROKR with iTunes Offered at GuyBuys.com

First phone in US to play Apple iTunes -- holds up to 100 iTunes songs.

New York (PRWEB) September 16, 2005 -- Guy Buys (http://www.guybuys.com), an online e-tailer specializing in merchandise for men, today became one the first online retailers in the United States to introduce the Motorola ROKR with iTunes.

"The cutting-edge Motorola ROKR is sure to be one the hottest gadgets this holiday season", explain the Guy Buys guys. "It also fits perfectly with our hand-picked selection of merchandise for men."

The Motorola ROKR for Cingular lets you hold up to 100 iTunes on your phone and play them through the built-in stereo surround-sound speakers or the included stereo headset. It features the ability to simply switch from listening to music to talking on the cell phone and back again with the push of a button. In addition to its iTunes compatibility, the phone boasts a long list of other features including stereo speakers and rhythm lights. The ROKR also houses a number of cutting-edge features including Bluetooth technology and still picture and video clip capture.

In addition to the Motorola ROKR, Guy Buys offers an impressive selection of more than 40,000 different items, all pre-screened and personally endorsed by - who else? - guys. Merchandise ranges from electronics, video games and DVDs to tailgating gear, foosball and air hockey tables, sporting goods and collectibles. In fact, the site carries one of the largest collections of autographed sports paraphernalia available anywhere.

For more information about the new Motorola ROKR with iTunes, or to be among the first to purchase the phone, please visit http://www.GuyBuys.com.

Posted by Industrial-Manufacturing at 01:19 AM | Comments (0)

The WireTracks iCove Supports the New iPod Nano

WireTracks LLC is pleased to announce that the WireTracks iCove supports the new iPod nano.

Seattle, WA (PRWEB) September 16, 2005 -- WireTracks LLC is pleased to announce that the WireTracks iCove supports the new iPod nano.

The WireTracks iCove is an in-wall display and storage cabinet for personal electronics. As part of its inherent open source design, it supports all models of the Apple iPod, including the regular iPod, the iPod mini, the iPod shuffle, and the new iPod nano.

Additionally, it supports other products including:

* MP3 players
* Portable satellite radio receivers
* Mobile phones
* PDAs and Smartphones
* Two-way radios
* Commercial electronics
* Other Specialty Devices

“WireTracks is a strong proponent of the open source philosophy,” explains Bruce Gutman, president of WireTracks, “we designed the WireTracks iCove to work with most personal electronic devices.”

“Some of our competitors design proprietary products that will eventually leave their customers with a useless plastic box or a hole in the wall,” continues Bruce Gutman, “customers who choose our products will be ready for the future regardless of technological and product changes.”

According to the Washington Post, the average lifespan of a cellular telephone is 18 months in the United States. Lifespan estimates for the Apple iPod ranges from 2 to 3 years. With the WireTracks iCove, customers are ready for the future.

The WireTracks iCove is designed to be customized. It comes in standard sizes that enable you to frame it out with custom molding or standard picture frames. This provides a tremendous amount of flexibility and lets owners get exactly the look and feel they are seeking.

The WireTracks iCove retails for $199.95. For more information, please view the brochure at www.wiretracks.com/wt-iCove-brochure.pdf.

For more information about WireTracks, contact Bruce Gutman at 206-361-6110 or e-mail protected from spam bots. Or, visit the WireTracks website at www.wiretracks.com.

Quick Statistics

As of January 2005, over 10 million Apple iPods have been sold—Apple Computer.

Apple is expected to sell over 100 million Apple iPods by 2008—MacDailyNews.

There are 159 million cellular phone users in the United States—U.S. Census 2003.

As of December 2004, XM Satellite Radio has over 3.1 million subscribers—XM Satellite Radio.

Up to 48 percent of new homes will be pre-wired with structured wiring by the end of 2004—Parks Associates.

Fifty-eight percent of all new homes incorporate structured wiring—CE Pro Magazine.

Posted by Industrial-Manufacturing at 01:18 AM | Comments (0)

VI Technology's Arendar 2006 Test Data Management Software Delivers Multidimensional Test Performance Analysis

Arendar 2006 test data management software, delivers the first drag-and-drop multi-dimensional test data analysis capability for research, design and manufacturing test.

Austin, TX (PRWEB) September 16, 2005 -- VI Technology, Inc. announces that Arendar® 2006, the newest version of its test data management software, offers the first drag-and-drop multi-dimensional test data analysis capability along with enhancements for data organization, security, analysis and reporting.

"Arendar brings business intelligence technologies to test engineering to give engineers and managers the ability to improve their design and manufacturing efficiency by immediately viewing test data from an unlimited number of perspectives," says Richard House, President of VI Technology.

Arendar 2006 enhancements include:

Test Performance Analysis: Arendar's Test Performance Analysis (TPA) leverages the power of online analytical processing (OLAP) to immediately show how tests are performing from an unlimited number of perspectives including by date, by test station, by product, by product line, by operator, and by test revision.

Hierarchical Test Data Classification and Object-Level Security: Arendar's new unlimited hierarchical folders and object-level security allow engineers to graphically configure and segment the database for specific test data, station information and reports. Users now have a security model to control visibility, modification and access to test data, folders, and reports. Arendar security administration allows users to set viewing, modification and access privileges for individuals and groups independently. Arendar simplifies security administration by integrating with Windows security for login control.

Enhanced Analysis and Reporting Capability: Arendar 2006 now offers N-pass yield and histogram reports. Other usability enhancements include a simplified data selection process, streamlined navigation and user specified bins for capability histograms.

Arendar 2006 Desktop and Enterprise Test Data Management software will be available in October 2005. The price for Arendar Desktop is $3995. Arendar Enterprise Server starts at $9995. For more information go to www.vi-tech.com/arendar.

About VI Technology
VI Technology (www.vi-tech.com) has increased companies' quality and productivity by delivering test data management, automated test and automation products and services since 1991. Arendar, the award-winning test data management software captures and organizes research, design and manufacturing test data and makes it universally accessible and useful. Arendar is a scalable solution that gives engineers and managers global access to information they need to shorten time-to-market, improve quality, increase productivity and reduce cost. VI Technology is a National Instruments Certified Alliance Partner and a Microsoft ISV Solutions Certified Partner.

Contact Information
Don Holley
Marketing Manager
(512) 327-3348 Fax (512) 327-3341
e-mail protected from spam bots
http://www.vi-tech.com

Posted by Industrial-Manufacturing at 01:16 AM | Comments (0)

AlfaMag Electronics Is Offering New AC-DC Switching Power Supplies

Rolla, Missouri (PRWEB) September 16, 2005 -- AlfaMag Electronics has a new line of AC-DC switching power supplies, ranging from 3W to 60W, with standard universal input voltages at 115/230VAC, 50/60Hz, and standard single output voltages ranging from 2.8Vdc to 24Vdc. These power supplies are low cost and high quality, and available in wall mount, desktop, and open style construction. Custom designs are also available.

AlfaMag can incorporate into the design protection against in-rush current, protection against overload, and EMI filtering requirements. You can also specify the delay time after switch-on and delay time after switch-off. AlfaMag has a UL Family Recognition on all the enclosed style standard supplies. Full specification and dimensionsal information can be viewed on the Product Index link on the AlfaMag website. For additional information, contact Rick Eissinger, Sales Manager at AlfaMag Electronics, Phone: 800-413-6693 or 573-364-2422, Fax: 573-364-5390.

AlfaMag Electronics specializes in high frequency magnetic components, linear and switching power supplies, and EI laminate transformers. They offer the convenience of local technical and sales support, with the ablilty to produce most of their magnetic components in-house for quick engineering sample turnaround and the economy of offshore manufacturing for production quantites.

Posted by Industrial-Manufacturing at 01:16 AM | Comments (0)

September 15, 2005

Amzer® introduces Nanowraps on iPodstreet.com

Amzer® Nanowraps now available exclusively along with other iPod Nano accessories on iPodstreet.com

Alexandria, VA (PRWEB) September 15, 2005 -- Amzer®, a leading manufacturer of iPod accessories, recently unveiled its new collection for the Nano on iPodstreet.com. Among the most popular accessories, there are 10 ‘Nanowraps’ for Apple’s new iPod device, which hit the market last week. Pallavi Dinesh, a representative for iPodstreet.com says, “The new Nano is even more lightweight than the mini, so we asked Amzer® to develop a Nanowrap – an ideal solution for iPod owners to personalize their device without adding bulk to it.” The current offerings come in hot colors and designs ranging from Solid State Orange to Flower Power. These precision-engineered ‘wraps’ are easily removable, washable, and will never fade, smudge, or smear.

And not to worry! For people out there that will find it hard to part with the long-beloved silicone cases, iPodstreet.com is featuring ‘Nano Tubes’ as well. In addition to Nanowraps and Nano Tubes, the e-tailer also has other accessories for the Nano including headsets, chargers, and battery backups.

About Amzer®

Amzer® is a fast evolving technology and enhancements leader in communication products for mobile consumers across the globe. Amzer® products, including Bluetooth and MP3 accessories are currently available exclusively through Moftware retail sites.

About iPodstreet.com

iPodstreet.com was launched in January 2005 in order to provide customized solutions for iPod users. Since then the website has gained a reputation for offering one of the largest selections of iPod enhancements and accessories in the world. iPodstreet.com is owned by Moftware, a multinational company, and the innovator of many internet retailers offering mobile and MP3 enhancements. Headquartered out of Virginia, Moftware’s mission is to provide high quality products at unbeatable prices to consumers so they don’t have to deal with the hassle of comparison shopping.

Posted by Industrial-Manufacturing at 09:16 AM | Comments (0)

Bluespan®, Inc. Names Brickhouse Security to Distribute Child Safety Device ionKids in New York City

Bluespan®, Inc. will team up with BrickHouse Security in New York to promote their child locating and tracking device ionKids to parenting groups in New York City. The hand-held system utilizes short-range radio wave technology, making it more effective and reliable than GPS salellite which does not function indoors. Bluespan, Inc. is a wireless technology company and leader in child location technology based near Austin, Texas.

NEW YORK, NY (PRWEB) September 15, 2005 -- Bluespan®, Inc. CEO Robert M. Frank has announced that BrickHouse Security in New York City has been selected to promote and distribute their first product, ionKids® to parenting groups in the New York area. IonKids is a child safety device manufactured and distributed by Bluespan, Inc., a wireless technology company and leader in child location technology based near Austin, Texas.

Using short-range radio wave monitoring and locating technology, ionKids is an easy-to-use system designed to help parents or guardians keep track of their children. The system includes a specially designed, tamper- and water-resistant wristband worn by the child, and a small handheld device, or base unit used by the parent or guardian to monitor a child’s location. Parents can set the base unit to "safe distances" up to 350 feet to simultaneously keep tabs on up to four children.

BrickHouse Security is a division of BrickHouse Electronics Corporation located in New York City, a service oriented company dedicated to protecting individual privacy and security. Brickhouse Security seeks to provide customers with cutting-edge home security and child safety products that are easy to set up and use. The company has identified safety solutions previously available only to government agencies, security companies and corporate executives.

BrickHouse Security is organizing live demonstrations of the ionKids tracking and locating system for parents. Interested schools, daycare centers and other parenting groups in New York can request a live demonstration at a parent night or other parent event. Information is available online at www.brickhousesecurity.com/nyc.html.

"Bluespan has selected BrickHouse Security to be our lead partner in this important metropolitan market," says Mr. Frank. "Ionkids is the most reliable child monitoring and locating device on the market and we are looking forward to working with Brickhouse to broaden awareness of this potentially life-saving technology."

BrickHouse Security has begun meeting with leading parenting groups, schools and daycare centers to show parents how they can use this new technology. "We have tested hundreds of products designed to help parents protect their children," says Brickhouse Security founder Todd Morris. "When we select products to promote, we look for a real solution to a problem that parents face each day. Most products we test don’t perform as advertised but Bluespan has developed a system that really works and meets our standards for quality, reliability and manufacturer support."

Bluespan's patented ionTechnology™ enables parents to set up an invisible electronic barrier. If the child passes through the barrier, an alarm sounds and lights flash on the Base Unit. If they are out of sight, the parent can activate the "locate" system and the child’s location will be indicated on the Base Unit and the parent can track the child’s movement until they can be retrieved.

For more information about Bluespan, Inc., visit www.bluespan.com or ion-Kids.com. For more information about Brickhouse Security, visit www.brickhousesecurity.com.

Posted by Industrial-Manufacturing at 09:15 AM | Comments (0)

Nazomi Communications Partners with Excelsior to Create Optimizing "C" Compiler for Nazomi's JA108 and MX280 Multimedia Processor for Cell Phone Applications

New optimizing compiler empowers designers with ability to hardware-accelerate Java as well as C-based multimedia applications, codecs and middlewares for high volume MMS mobile handsets.

SANTA CLARA, Calif. - September 15, 2005 - Nazomi Communications, Inc., a leading developer of multimedia processors for mobile handsets, today announced its partnership with Excelsior, LLC, a JVM and development tools vendor, which has resulted in the development of an optimizing C compiler for Nazomi's JA108, MX280 and future multimedia processors. These multimedia processors enable MPEG4 video, MP3 music, 2D/3D games and other multimedia applications on wireless handsets.

The compiler developed by Excelsior is being made available to Nazomi's worldwide customers. This tool enables mobile handset manufacturers and related third party ISVs to easily port existing C language video, audio and 2D/3D middlewares libraries for Nazomi's multimedia processors. This allows mobile handset carriers to deploy additional services for handsets equipped with Nazomi's multimedia processors. With ever increasing demand for middleware libraries, cell phone manufacturers can now offer field upgrades enabling additional revenue sources for phone carriers.

"The toolkit we developed for Nazomi is the first of its kind because it includes a C compiler that generates code for a family of Java hardware accelerators," said Vitaly Mikheev, Excelsior's CTO. "Nazomi's multimedia processor architecture is quite unique, and the creation of a production-quality optimizing compiler was a challenging and innovative project. It required a substantial amount of our compiler expertise."

"The project has been completed on time and on budget, a welcome result for such an R&D project, especially one that was outsourced," commented Mukesh Patel, CTO and Chairman of Nazomi Communications. "Excelsior provided us a complete solution that enables our customers to deploy additional multimedia features at a rapid pace."

Availability

The new C compiler toolset is available now from Nazomi. This toolset enables firmware developers to compile any C program, without any modifications or performance penalties. The JA108 and MX280 processors are compatible with many embedded microprocessor, SoC or mobile handset chipsets for GSM, GPRS, CDMA and WCDMA, PCS & PHS. They are compliant with all Java standards and adaptable to any Java virtual machine, offering Java-based, as well as native multimedia applications on wireless handsets. Nazomi's multimedia processors are designed to be completely transparent to existing designs and legacy operating systems.

About Excelsior

Excelsior, LLC provides top quality products and services for all stages of the software development lifecycle. Excelsior is an authorized licensee of the Java technology and particularly focuses its development on optimizing compilers and high-performance runtime environments. Excelsior has its headquarters in Novosibirsk Scientific Center, Russia, and is on the Web at www.excelsior-usa.com.

About Nazomi Communications

Nazomi Communications, Inc. is a Silicon Valley-based fabless semiconductor company focused on delivering multimedia processors for mobile handsets. Its solutions enable hardware-based acceleration to dramatically speed, processing and performance of Java, video, imaging, 2D/3D graphics, animation, gaming, and other multimedia applications. Nazomi's technology is supplied in the form of stand-alone processors, combination memory devices and IP cores to well-known mobile phone makers and semiconductor companies worldwide. Its technology is incorporated in world-leading mobile phone makers such as Samsung, Sony-Ericsson, Sharp and SKTeletech. Nazomi holds fundamental patents on Java hardware acceleration technology. More information about Nazomi Communications can be found at http://www.nazomi.com.

Contact:

Dmitry Leskov
Director of Marketing
Excelsior, LLC
Tel: +7 (383) 213-8649 (6AM-6PM GMT)
Fax: +1 (509) 271-5205
http://www.excelsior-usa.com

Suresh Agarwal
VP of Marketing
Nazomi Communications
Phone: +1(408)-654-8988
http://www.nazomi.com

Sun Microsystems, the Sun logo, Java and all Java-based logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. All other products, services and companies are trademarks, registered trademarks or servicemarks of their respective owners in the U.S. and/or other countries.

Posted by Industrial-Manufacturing at 09:13 AM | Comments (0)

New Scale Awarded Fundamental US Patent for Piezo SQUIGGLE Motor Technology

Patent validates unique design of tiny ceramic motor used in mobile phone cameras, MRI-safe implantable medical devices, and vacuum or low-temperature research applications.

Rochester, NY (PRWEB) September 15, 2005 -- The U.S. Patent and Trademark Office has granted New Scale Technologies, Inc. a fundamental patent for its revolutionary SQUIGGLE motor design. Made of piezoelectric ceramics and other non-magnetic materials, the tiny SQUIGGLE motor has applications in nanotechnology research, microelectronics, optics, lasers, biotechnology, medical devices, aerospace and defense, fluid control, and office/consumer products including mobile phone cameras.

Patent Number 6,940,209 issued on September 6, 2005.

"This fundamental patent on our SQUIGGLE motor technology validates its unique design," said New Scale president David Henderson. "It gives us key intellectual property protection as we continue to develop new, smaller SQUIGGLE motors and pursue additional commercial applications."

The SQUIGGLE motor design uses a threaded nut and screw to create precise linear movement in a very small space. Piezoelectric ceramics create ultrasonic vibrations in the nut, causing the screw to rotate and translate with high precision. Since introducing the first SQUIGGLE motor in 2004, New Scale has continuously improved the performance and reduced the size of its miniature motors. The latest models are less than 3 mm in diameter.

SQUIGGLE motors are smaller, more precise, less expensive and more efficient than conventional electromagnetic motors. With its unique materials and construction, the SQUIGGLE motor operates reliably in extreme environments such as vacuum, very cold (sub-kelvin) temperatures, and very high magnetic fields.

A key application is control of auto focus and optical zoom lenses in mobile phone cameras, where the motor’s compact size and low power consumption offer advantages over current technology. Because it is non-magnetic, it also offers unique benefits in medical device development; for example, creation of tiny drug delivery pumps that are MRI-safe and image compatible.

About New Scale Technologies

New Scale Technologies, Inc. (www.newscaletech.com) makes miniature ceramic motors that enable our customers to create smaller products and research tools. Our piezoelectric SQUIGGLE motors are smaller, more efficient and more precise than conventional motors. With only four parts and no gears, this patented piezoelectric motor design uses ultrasonic vibrations to create precise linear motion. New Scale’s miniature motors are compatible with extreme environments including vacuum, very low (sub-Kelvin) temperatures, and high magnetic fields. They are used in nanotechnology research, microelectronics, optics, lasers, biotechnology, medical devices, aerospace and defense, fluid control, and office/consumer products including mobile phone cameras.

SQUIGGLE is a registered trademark of New Scale Technologies, Inc.

Posted by Industrial-Manufacturing at 09:13 AM | Comments (0)

DISHCELL.COM Offers Support of Dish Network's 'Dish CityMakeover'

OSPREY, FL (PRWEB) September 15, 2005 -- Dishcell.com, a proud affiliate of AllSat.com, one of the leading online retailers of DISH Network services and equipment, announced today that it is offering its support to DISH Network's "DISH City Makeover" campaign.

The DISH City Makeover is an opportunity for every household in a participating city or town to receive a complete satellite TV system, including free TV programming, for 10 years. In turn, the town must agree to officially change its name to "DISH."

To participate, the town government must agree to change the name legally and permanently on government buildings, post offices, official letterhead, schools and hospitals if applicable, street signs where necessary, and any other government signage that contains the city or town's name.

The municipality must also file all necessary state and federal documentation. Submissions must be sent to CityMakeover(At)dishnetwork.com for approval by Nov. 1, 2005. Dishcell.com urges New Jersey residents to take advantage of a decade worth of free programming by changing their town's name to DISH. Representatives from Dishcell.com will contact city officials and try to convince them to participate in the Makeover. For more information about the DISH City Makeover or to get involved with the campaign, visit http://dishcell.com. DISH Network provides "Better TV for All" by giving customers the latest technology such as high definition and digital video recording, award-winning customer satisfaction and America's lowest all- digital price.

By signing up with DISH Network, television subscribers find they can save money, while receiving the best in customer satisfaction, programming and equipment. With DISH Network's Digital Home Advantage, customers can receive more than 60 channels including local channels, with free installation, no commitment, and no equipment to buy, all for $31.99 per month. Customers can also get a free upgrade to a digital video recorder (DVR). DISH Network leads the pay-TV industry in international programming, with more than 100 channels in more than 25 languages. DISH Network also offers more interactive TV, and more high definition channels than any other pay- TV company in the U.S. DISH Network recently unveiled its one-of-a- kind, high definition DISH Player-DVR 942, which allows customers to record, fast-forward and pause live TV in multiple rooms.

Additional information is available at: http://www.dishcell.com

About Dishcell.com:
Dishcell.com is a proud affiliate of AllSat.com, an authorized DISH Network retailer. Visit the web site at http://www.Dishcell.com for more information and to order services including FREE cellphones and cellphone plans from TMI Wirelss, which DishCell.com is also an affiliate of.

About EchoStar
EchoStar Communications Corporation (NASDAQ: DISH) serves more than 11.4 million satellite TV customers through its DISH Network(tm), the fastest growing U.S. provider of advanced digital television services in the last five years. DISH Network offers hundreds of video and audio channels, Interactive TV, HDTV, sports and international programming, together with professional installation and 24-hour customer service. Visit EchoStar's DISH Network at http://www.dishnetwork.com

Posted by Industrial-Manufacturing at 09:11 AM | Comments (0)

Evolution Vinyl Works Releases New Accessory Skins for the iPod© Nano™

Evolution Vinyl Works, the Skindustry leader announces the release of their iPod© Nano™ line of vinyl skins and wraps.

(PRWEB) September 15, 2005 -- Evolution Vinyl Works is proud to announce the release of their new iPod© Nano™ Skins. The iPod© Nano™ is another fantastic addition to their rapidly growing collection of Skins.

Once again Evolution Vinyl Works has taken "Skin" design to another level. With the most accurate and precise cuts available, their revolutionary new cutting system allows them to have the best looking and the most detailed skins ever invented!

"This is just the start of what we plan to do with the "Skindustry" said Mike King, Co-Founder of Evolution Vinyl Works. "In a matter of days the demand for this particular product line has been overwhelming to say the least."

All of their printed wraps are 1440 dpi, high resolution images printed on 8-year cast vinyl that never shrinks or warps. After the printing is done it then receives a 2 ml high-luster clear vinyl laminate film to prevent any smudging, scratching, or smearing.

This is Clearlock™ their patented Graphix Protection Technology available only through Evolution Vinyl Works. It's protection for your Skin without the bulky look and feel. They offer the only Skins on the market with a 100% Satisfaction Guarantee. Along with the unbelievable protection that you get with the skin, it can be removed without leaving any residue! This permanent/removable adhesive makes applying and removing the skin a piece of cake.

With MP3 players "covered" literally, EVO has a wide selection of "Skins" for your Xbox™, PS2™, PSP™, Gameboy™ and the Nintendo© DS™ available for purchase online at http://www.evolutionvinylworks.com or through numerous international retailers shipped worldwide.

Posted by Industrial-Manufacturing at 09:11 AM | Comments (0)

September 14, 2005

iShopHQ.com Launches New Niche Shopping Comparison Site: ManyMonitors.com

In response to the growing trend in online shopping, iShopHQ.com has launched a new website, ManyMonitors.com—a compilation of multi-purpose monitors, that caters to user searching preferences.

(PRWEB) September 14, 2005 -- The iShopHQ.com shopping network has announced the launch of their newest website, www.ManyMonitors.com. This site, like all iShopHQ’s niche shopping directory and comparison sites, caters to the user’s product preferences. ManyMonitors.com offers a comprehensive compilation of Computer Monitors, including LCD, CRT and touchscreen TFT monitors from the Internet’s most popular consumer electronics stores. The site provides users with a variety of sorting and filtering options, allowing visitors to adjust results according to price, product name, store and more. ManyMonitors.com currently has over 400 monitors available from stores like Best Buy, PC Connection, Home Shopping Network, Overstock, Computer Geeks and more.

According to the Commerce Department, “Retail sales over the internet rose 7.2% in the second quarter of 2005, the largest rise in three years.” E-commerce sales accounted for $67.2 billion dollars in 2004. “The number of Internet searches done monthly on the word monitor alone is typically in excess of 500,000, with approximately 250,000 additional subsequent searches for related terms such as buy monitors, compare monitors, LCD monitors, shop monitors, etc.,” stated David Felts, iShopHQ founder. “There are a lot of consumers looking to buy a computer monitor, and ManyMonitors.com can help.”

“The advantage of iShopHQ websites is that each site caters to a particular product line, making it easier for customers to shop for the specific product they want and then compare prices and stores. This results in the shopper getting the information he or she needs to make an informed purchase, while finding the price they are willing to pay,” added Felts.

There are no fees or price mark-ups for using www.ManyMonitors.com. Since all transactions and shipping go through the vendors, the shopping advantage is simple: Compare, decide, and buy, knowing you have found the monitor you want, from the brand name store you trust, at the price you want to pay.

About iShopHQ.com
David Felts built www.iShopHQ.com in 2003 in response to the growing demand for e-commerce shopping. In order to accommodate the customers needs, he designed iShopHQ.com websites that allow the shopper to control their own experience. At iShopHQ.com websites, you can compare products and prices from over 40 big names stores, control the shopping experience, and use the power of information to make an informed buying decision. Since inception, iShopHQ.com has branched out into 30 niche shopping directory websites, with each site dedicated to simplifying and expediting the online shopping process.

Posted by Industrial-Manufacturing at 11:33 AM | Comments (0)

nLayers CEO, Gili Raanan, to Present at VentureWire Datacenter Ventures Conference

San Jose, CA (PRWEB) September 14, 2005 -- nLayers, the leader in real-time discovery and resource optimization, today announced that the company's CEO and founder, Gili Raanan, was handpicked by the editors of VentureWire to present at the Datacenter Ventures 2005 conference. This year's event will take place on September 20-21, 2005 at Sofitel San Francisco Bay Hotel in Redwood City, CA.

Recognized as a CEO of a start-up company that is positioned for long-term success, Raanan will present his business model at this month's conference and engage attendees in a discussion around the strategies, technologies, services and products that enable businesses to maximize the value of their IT budgets. Raanan's session will take place on Tuesday, September 20 at 3:35 p.m. and then again at 4:50 p.m.

Datacenter Ventures, now in its fourth year, has established itself as one of the premier thought leadership opportunities for senior executives from top-tier security, storage and data management companies. It brings together a critical mass of leading technology entrepreneurs and investors -- potential customers, partners and suppliers at the cutting edge of innovation. The two-day program is produced by VentureWire and features keynotes, panels and CEO presentations from over 70 handpicked private companies presenting their business plans and prospects.

If you would like more information about nLayers, please visit www.nlayers.com, or contact Julie Tangen at 831.420.3511 or e-mail protected from spam bots.

About nLayers
nLayers InSight is the easiest, most comprehensive solution for discovering, understanding and mapping the complex relationships between applications and technology infrastructure. Unlike incomplete, point solutions that rely on difficult-to-deploy agents or provide scattered, "snapshot" views using scanners, nLayers is the only discovery solution that combines passive and active discovery approaches to provide an end-to-end, "living" model of the IT environment that continuously tracks resource dependencies, demand, usage and service levels. For nLayers' customers, this model serves as the foundation to accelerate and increase ROI for a wide range of critical IT service and cost management initiatives, including change and configuration management, ITIL/CMDB development, business service management (BSM), data center automation (DCA), and capacity planning. nLayers is a privately held company headquartered in San Jose, California, and at www.nlayers.com.

Posted by Industrial-Manufacturing at 11:32 AM | Comments (0)

Jennic Purchases State-of-the-Art Agilent RF IC Tester for On-Site Product Validation and Test Development

Jennic has announced the purchase of its first Agilent 93000 SoC series RF IC tester, to be installed at its Sheffield headquarters in the UK. This acquisition, considered to be a first for a UK fabless semiconductor company, enables Jennic to implement rapid product validation and multi-site test development for its JN5121 IEEE802.15.4 wireless microcontroller.

Sheffield, UK (PRWEB) September 14, 2005 -- Jennic has announced the purchase of its first Agilent 93000 SoC series RF IC tester, to be installed at its Sheffield headquarters in the UK. This acquisition, considered to be a first for a UK fabless semiconductor company, enables Jennic to implement rapid product validation and multi-site test development for its JN5121 IEEE802.15.4 wireless microcontroller.

The installation of the tester in-house represents a major investment for Jennic. It forms part of its overall development, test and manufacturing strategy for volume shipments of the JN5121, including the hiring of additional staff. The tester enables Jennic to optimize production test costs and to accelerate the time to volume production by improved correlation between laboratory and production test programs.

The Agilent 93000 SoC series is a high throughput state-of-the-art system-on-chip RF IC tester that allows quick validation of production test programs in-house with quad site testing (the ability to test four devices simultaneously) to ensure the lowest possible test costs. Agilent has also provided Jennic with the N4010A dedicated IEEE802.15.4 bench test equipment.

DELTA, based in Denmark, will supply Jennic with volume test and packaging solutions, also using an Agilent 93000 tester, and ASE, one of the leading IC assembly houses based in Taiwan, will provide volume chip packaging services using a lead-free QFN package.

Commenting on the purchase of the Agilent tester as part of the company’s overall manufacturing flow, Paul Wells, Jennic’s VP of manufacturing said, “In order to meet volume delivery requirements for our single chip low power wireless microcontroller, we need to ensure we have the right manufacturing infrastructure. By making major investments in a state-of-the-art tester and establishing strong relationships with world class suppliers, we are able to source large volumes of high quality products for our customers.”

About Jennic
Jennic is a fabless semiconductor company leading the wireless connectivity revolution into new applications. Its expertise in systems and software combined with world class RF and digital chip design provides low cost, highly integrated silicon solutions for the low power short range wireless data market with a focus on the IEEE802.15.4 and ZigBee standards. The company’s products include state-of-the-art low power wireless microcontrollers, transceivers and low cost development platforms. Headquartered in Sheffield, UK, and employing over 60 people, Jennic is privately held and has a track record of successful silicon chip development for wireless applications over the last nine years.

Contact:
Fiona Davis, Jennic
Tel: +44 (0) 114 281 2655
Fax: +44 (0) 114 281 2951
Email: e-mail protected from spam bots
web: www.jennic.com

Posted by Industrial-Manufacturing at 11:32 AM | Comments (0)

At Last, the Magic Bullet Is Available for Easily Moving Barcode and Scale Data to Rockwell ControLogix, PLC5E and SLC 5/05 PLCs with No Ladder Logic

Sending ASCII data to a PLC is a nightmare: complicated setup menus; ASCII strings sent as I/O data; tricky message instructions; long, intricate PLC hand shaking logic; hours wasted knee deep in 100 page manuals; and unsupportive technical support. Why is it always like that? It’s not anymore. The Messenger ASCII to PLC Gateway is the magic bullet for quickly and easily moving ASCII data into Rockwell Automation Programmable Controllers with no Ladder Logic.

Milwaukee, WI (PRWEB via PR Web Direct) September 13, 2005 -- The Messenger ASCII to PLC Gateway is the magic bullet for quickly and easily moving ASCII data into Rockwell Automation Programmable Controllers with no Ladder Logic.

"I challenged my customer to get it working by the time I got back from his break room with a coke and he indeed had it working when I got back. Then he said, 'It's worth twice the price!'" says Eric P. at Kendall Electric Rockwell, the Automation Distributor in Grand Rapids, Michigan.

Jim, Controls Engineer at a Paper Manufacturer in Upper Michigan, said, "We had our barcode scanner up and running within a day…the great web interface makes it easy."

End the agony of sending ASCII data to your Rockwell PLC with the RTA "No
More Agony Plan":
1) Create a tag array or set of numeric registers in your PLC
2) Start the Web Server and tell it the PLCs IP address, the tag (or register) name and how to recognize your ASCII data (terminating character, num bytes or time)
3) Watch as the ASCII data just shows up in your PLC – Even if the PLC is in Program Mode

Get ASCII to PLC modules for ControlLogix and CompactLogix (Catalog #435NBA), PLC5E Processors (Catalog #435NBP) and SLC5/05 and MicroLogix (Catalog #435NBS).

Real Time Automation is a Milwaukee, WI-based provider of Industrial Ethernet Products, Source code stacks and systems.

For further information, contact:
John Rinaldi
Real Time Automation
414-453-5100
www.ascii-to-plc.com

Posted by Industrial-Manufacturing at 11:30 AM | Comments (0)

Planetweb® Integrates Award Winning Photo Software Into Silicon Optix Realta Video Platform

Planetweb's Digital Photo Manager, an integral application on the SpectraWorks software platform, is available on Silicon Optix's Realta HQV™ fully programmable video processing engine.

San Jose and Redwood Shores, CA (PRWEB) September 14, 2005 -- Planetweb’s Digital Photo Manager, an integral application on the SpectraWorks software platform, is available on Silicon Optix’s Realta HQV™ fully programmable video processing engine.

SpectraWorks application software includes digital photo management, digital audio management and personal video recording. With Digital Photo Manager, consumers can preview thumbnails, view high resolution full-screen photos (including the ability to zoom, pan and rotate photos), and enjoy personalized slide shows of their JPEG format digital photos from memory cards, digital cameras or other USB storage devices.

“Planetweb is the first third party software company to take advantage of the power of Realta’s programmable platform,” said Dennis Crespo, VP of Marketing, Silicon Optix. “SpectraWorks is a proven software platform with applications that enable consumer electronics manufacturers to rapidly differentiate their products from their competitors.”

“We’re excited to combine the impressive image processing capabilities of Silicon Optix’s Realta HQV video processor with the award-winning Digital Photo Manager,” said Ken Soohoo, President and CEO of Planetweb.

The Digital Photo Manager was on display during CEDIA Expo 2005 at the Silicon Optix 13,000 sq. ft. HQV exhibition in the Grand Hall at the Crowne Plaza Hotel Union Station. Silicon Optix will include a demonstration version of the Digital Photo Manager and Planetweb’s SpectraBuilder user interface development tool in Realta-based reference designs beginning October 2005.

SpectraWorks Enriches User Experience and Improves OEMs Time to Market.
Digital Photo Manager is built with the SpectraWorks platform for Consumer Electronics applications, which gives Original Equipment Manufacturers (OEM) an unprecedented ability to rapidly develop and customize both applications and Graphical User Interfaces for any consumer electronics device. With the SpectraBuilder User Interface development tool and SpectraCore software engine, an OEM can develop a unique platform independent user experience with strong branding in a fraction of the time it would take using conventional methods while ensuring a consistent look and feel across multiple devices or product lines. More than one million units of Digital Photo Manager have shipped to date through industry leading OEM brands.

About Silicon Optix
Silicon Optix Inc, a privately held fabless semiconductor company, is the leading supplier of advanced video/image digital processing integrated circuits (ICs). The company's products are driving three unique technologies into a broad range of markets: a patented, powerful, array-based programmable DSP for digital video, industry-leading software algorithms from Teranex and proprietary eWARP geometry processing. Its mission is to leverage these innovative technologies into ICs that will enable the next generation of digital video/image capture, transmission, distribution, editing, storage and display solutions, with an initial focus on large area digital displays including front and rear projection. Silicon Optix is headquartered in San Jose, California, with operations in Hanover, Germany; Orlando, Florida; Taipei, Taiwan; Shanghai, China; and Toronto, Canada.

About Planetweb®
Planetweb® is a leading provider of embedded software and developer tools for the consumer electronics industry. Planetweb’s SpectraWorks platform – SpectraCore, SpectraBuilder and SpectraApps - enables OEMs and silicon vendors to rapidly develop and customize graphical applications and services for consumer electronics products. These applications and services bring popular features and functionality to digital entertainment devices, including DVD recorders, DVD players, digital televisions, set-top boxes and mobile devices. Software from Planetweb has shipped in more than 6 million units of product from top manufacturers worldwide. Planetweb, a privately held company, is headquartered in Redwood Shores, California, and has offices in Tokyo, Japan. For more information, visit http://www.planetweb.com/.

Posted by Industrial-Manufacturing at 11:30 AM | Comments (0)

September 13, 2005

Intelligent Digital LVDT Controllers & Indicators Simplify Set-Up In Diverse Applications

Macro Sensors, (www.macrosensors.com), an American Sensor Technologies (AST) company specializing in the manufacture of LVDT-based linear and rotary sensors, gaging probes, support electronics and related instrumentation, introduces a new family of economically-priced and user-friendly digital controllers and indicators that delivers precise measurement for applications using AC- and DC-LVDT (Linear Variable Differential Transformer) inputs.

(PRWEB) September 13, 2005 -- Macro Sensors, (www.macrosensors.com), an American Sensor Technologies (AST) company specializing in the manufacture of LVDT-based linear and rotary sensors, gaging probes, support electronics and related instrumentation, introduces a new family of economically-priced and user-friendly digital controllers and indicators that delivers precise measurement for applications using AC- and DC-LVDT (Linear Variable Differential Transformer) inputs.

Designed especially to optimize the use of LVDTs in automation, process or lab applications, the Series DMI Single Channel LVDT Indicators offer user-friendly set-up with a scrolling display that actively prompts users for all LVDT parameters. A 5-digit alphanumeric display, which can be calibrated in any engineering units, offers readout down to 1/10,000 inch. Units offer four programmable setpoints with alarm status annunciator LEDs. With the Series DMI Indicators, R&D staff, factory automation personnel and other technicians can easily set up and monitor the functionality of plant controllers and indicators without engineering assistance.

Designed to drive and condition the signal from an LVDT transducer, the Series DMI Single Channel LVDT Indicators contain two high-speed micro controllers and a 16-bit A/D converter that has over 130 dB noise rejection at the excitation frequencies and is capable of 40 Hz averaged output on 45 samples. Scrolling text menus provide quick access to a range of configuration modes for easy application setup.

LVDT sensors used with the Series DMI Single Channel LVDT Indicators can be applied in almost all engineering applications covering civil, mechanical, petrochemical, power generation, production, aerospace, defense, and much more. They can be used on production lines to automatically gauge products for quality control and product sorting. In the power generation and petrochemical industries they can be used, for example, as servo position feedback on actuated equipment such as valves and dampers, or for measuring turbine casing expansion. Submersible units can be used in marine and offshore mining applications.

Macro Sensors offers its digital LVDT controllers in both AC- and DC-versions including:

The DMI-A1 Series AC LVDT Indicator utilizes one of its two micro controllers to generate the sine wave for the AC LVDT excitation frequency. These frequencies are produced as multiples of the line frequency (either 50 Hz or 60 Hz that are selectable via the scrolling text menus). Units provide a high-speed 10V scalable analog output without recalibration and built-in excitation to properly power any standard AC-LVDT.

The DMI-DI Series DC LVDT Indicator communicates with the selected controller internally via the .2C data bus. Units offer a 10V scalable analog output without recalibration and built-in 24V DC to power virtually any DC-LVDT

Macro Sensors’ Series DMI Signal Channel LVDT Indicators are economically priced at about one-third lower than competitive LVDT dedicated units. For additional information, please contact Eileen Otto at 856-662-8000/email: e-mail protected from spam bots or visit our web site at www.macrosensors.com.

About Macro Sensors
Macro Sensors’ extensive line of LVDT-based linear and rotary sensors are used for linear position measurement and feedback in a variety of industrial applications including factory automation, motion control systems, metal fabricating, automotive assembly as well as power plants, gas/steam turbines. Incorporated in 1994, the Company offers more than 200 years of cumulative design and manufacturing experience by its key staff in serving its OEM and end-user international customer base. On June 1, 2005, Macro Sensors was acquired by AST, manufacturer of state-of-the-art (Micro Electro Mechanical Structures) MEMS-based pressure sensors, transducers, and transmitters. Common applications of AST sensor products are in industrial OEM, hydraulic systems, fuel cells, medical gases, HVAC/R, refrigeration, oil & gas exploration/production, and off-road vehicles. For more information on AST products and technology, visit the AST website at www.astsensors.com.

Posted by Industrial-Manufacturing at 05:19 AM | Comments (0)

September 12, 2005

Speedline Technologies' MPM AccuFlex Featured in Live EASi Electronics Assembly Line at ATExpo 2005

Speedline Technologies' popular MPM AccuFlex stencil printer will be showcased as part of the live, working electronics assembly line at the center of this year's Assembly Technology Expo (ATExpo), September 27-29, in Rosemont, IL.

Franklin, MA (PRWEB) September 12, 2005 -- Speedline Technologies' popular MPM AccuFlex stencil printer will be showcased as part of the live, working electronics assembly line at the center of this year's Assembly Technology Expo (ATExpo), September 27-29, in Rosemont, IL.

Live in the show's Electronics Assembly Pavilion, the AccuFlex stencil printer, and other leading industry equipment will comprise the functioning EASi (Electronic Assembly Suppliers' Initiative) manufacturing line. Attendees will be invited to view the live assembly and inspect the results – the final product being a digital clock which will be handed out to visitors.

In ATExpo booth number 5710, Speedline will feature information about the AccuFlex system – as well as its new MPM Accela stencil printer, its Electrovert OmniExcel 7 reflow oven and Quick Change Solder pot equipped with Speedline's new UltraFill nozzles for lead-free wave soldering.

Ideally suited for moderate volume, high-mix printing at a cost-effective price, the AccuFlex stencil printer (www.speedlinetech.com/mpm/accuflex.aspx) combines accuracy and unparalleled flexibility in a compact footprint. It provides only what is needed for efficient and precise printing, while offering electronics manufacturers a full range of options for future expansion. The AccuFlex printer is designed for production of about 8,000 boards per week with two or more product changeovers per shift. The system easily handles boards from 3" x 2" to 23" x 20" and is capable of printing 12-mil pitch devices with consistent accuracy. The system can be equipped with an Auer boat handling system with improved fixturing and easy-change tooling recently designed by Speedline. It allows customers to achieve the high yield and throughput performance required for fine pitch semiconductor substrates. The AccuFlex stencil printer provides an accurate and reliable platform for this application. With the addition of Auer boat printing capabilities, the AccuFlex is now poised to satisfy even more customers in the semiconductor industry.

For more information about the MPM AccuFlex stencil printer, contact your Speedline distributor or representative, or reach Speedline Technologies at 1-508-520-0083 or http://www.speedlinetech.com.

About Speedline Technologies
Speedline Technologies is the global leader in process knowledge and expertise for the PCB assembly and semiconductor industries. Based in Franklin, Massachusetts, U.S.A., the company markets five best-in-class brands — Accel microelectronics cleaning equipment; Camalot dispensing systems; Electrovert wave soldering, reflow soldering, and cleaning equipment; MPM stencil and screen printing systems; and Protect global services, support, and training solutions. Speedline Technologies is Frost & Sullivan's "2005 Surface Mount Technology Company of the Year." For more information, visit: http://www.speedlinetech.com or contact Speedline at:

* USA: Speedline Technologies, 16 Forge Park, Franklin, MA 02038 USA, Tel: 1-508-520-0083, Fax: 1-508-520-2288, E-mail: e-mail protected from spam bots;
* Europe: Speedline Technologies GmbH, Im Gefierth 14, 63303 Dreieich, Germany, Tel: +49 (0)6103/832-0, Fax: +49(0)6103/832-299, E-mail: e-mail protected from spam bots;
* Asia: Speedline Technologies Asia Pte Ltd, 150 Kampong Ampat, #05-08 KA Centre, Singapore 368324, Tel: 65-6286-6635, Fax: 65-6289-9411, E-mail: e-mail protected from spam bots.

Note to Editors:
* Download high resolution photos for publication from: http://www.tizinc.com/speedline/images/accuflex-high-res.jpg

Posted by Industrial-Manufacturing at 11:01 AM | Comments (0)

TechNote Time Introduces Ohm's Law Coin for Electrical and Electronics Tradesmen

TechNote Time, which specializes in Ohm's law watches and clocks, has introduced a new Ohm's law coin to their product line. Their newest product offers the convenience of carrying electrical formulas in the form of a pocket coin and has the durability to last for a lifetime of use.

(PRWEB) September 13, 2005 -- TechNote Time, which specializes in Ohm's law watches and clocks, has introduced a new Ohm's law coin to their product line. Their newest product offers the convenience of carrying electrical formulas in the form of a pocket coin and has the durability to last for a lifetime of use.

The new die-struck medallion, which features alternating current formulas (AC Ohm’s law) on one side and direct current formulas (DC Ohm's law) on the other, is sure to please both electrical and electronics trades professionals. The large 2" antique copper coin is reddish brown in color and made from solid copper. Coated with an antiquing catalyst, the raised areas illuminate against the dark recesses giving it a sophisticated and unique look.

TechNote Time's Ohm's law pocket coin is designed for the professional tradesman and the serious do-it-yourselfer and is expected to make a unique gift idea this holiday season.

TechNote Time offers specialty gifts and useful products for electricians and electrical maintenace workers, linemen, electronic technicians, engineers, students preparing for electrical and electronics examinations and hobbyists such as amateur radio operators. For more information on the new Ohm's law medallion, please contact TechNote Time, Ocala, FL. Phone: 352-694-2744. Fax: 352-694-2746. or visit their website at www.technotetime.com

Posted by Industrial-Manufacturing at 11:01 AM | Comments (0)

iPodstreet.com Announces Full Range of iPod Nano Accessories

iPod Nano accessories now available from a leading iPod accessory e-tailer.

Alexandria, VA (PRWEB) September 12, 2005 -- iPodstreet.com, one of the largest accessory e-tailers for iPod announced today its new products for the iPod Nano debuted by Apple earlier this week. The company is rolling out a full range of cases, headsets, and other gadgets in line with its already hip collection of accessories for other iPod models.

Many iPod Nano enhancements are now available on the site according to sources at iPodstreet.com. In addition, CEO, Pinakin Dinesh, comments "The pencil-thin Nano has inspired us to develop a special line of cases, debuting later this month, which will be unparallel in performance and design style. We're very excited to feature these new products." As for other unique products for the Nano, keep checking iPodstreet.com for a special earbud coming out in October.

About iPodstreet.com

iPodstreet.com was launched in January 2005 in order to provide customized solutions for iPod users. Since then the website has gained a reputation for offering one of the largest selections of iPod enhancements and accessories in the world. iPodstreet.com is owned by Moftware, a multinational company, and the innovator of many internet retailers offering mobile and MP3 enhancements. Headquartered out of Virginia, Moftware's mission is to provide high quality products at unbeatable prices to consumers so they don’t have to deal with the hassle of comparison shopping.

iPod is a trademark of Apple Computers and iPodstreet.com is a trademark of Moftware, LLC. All rights reserved.

Posted by Industrial-Manufacturing at 10:58 AM | Comments (0)

Xterprise Customers' Capacity Exceeds Five Million RFID Tags

Over 5,000,000 cases a year labeling capacity is in place and growing with Xterprise customers. A new study shows the demand for increased capacity and data aggregation will continue.

Dallas (PRWEB) September 12, 2005 -- Xterprise Incorporated, an industry leading solutions provider, consultant and compliance expert for the "RFID Enabled Supply Chain" announced its customers have passed the benchmark capacity of 5,000,000 RFID labels a year.

Xterprise officials say installed capacity will soon exceed 15,000,000 RFID labels a year. Installed capacity will continue to rise because of upgrades the company has made in its XARM™ 3000 and 4000 solutions, and because of recent project wins at some of the world's largest retail suppliers. Most Xterprise customers are using RFID in retailer supply chain logistics for case and pallet tags. The company said a number of customers are expanding capacity by upgrading their XARM™ solutions to achieve higher quantities and higher levels of automated performance.

"The XARM enhancements provide a number of performance and price advantages over other alternatives," said Tom Abraham, Director of Solutions at Xterprise. "By working closely with our partners Alien, Zebra Technologies, Apriso, Weber and DPI, we achieved a 250 percent increase in throughput over our already best-in-class solutions. As retailers expand tagging requirements, we will continue to provide higher capacity and add more value by using the number of the RFID data aggregation and data exchange features that are in our solutions."

The company provides RFID infrastructure capacity with it's low volume solutions of XARM 1000 & 2000 (manual and software integrated slap 'n ship) and medium to high volume offerings with its XARM™ 3000 (conveyor automated tag and label placement) and the XARM™ 4000 in-line conveyor manufacturing solutions. These solutions can be software integrated into practically any WMS or ERP solutions that are being run by its customers.

The company stated it expects the market will require greatly increased tagging capacity over the next 12 months, with the market growing by 500 percent.

"We are now entering a phase where focus in RFID infrastructure solutions is on automation and maturity rather than on physics," Abraham said. "It can now be said that both manual and high speed application of RFID tags on cases is both technically proven and effective in meeting major retailer's mandates."

As a result, Xterprise is focusing internal investments on leading the industry in the automation and information exchange trend.

In addition, the company announced completion of a customer benchmarking study on RFID tagging. The study showed only a few retail suppliers who invested modestly in RFID tagging and data aggregation will be able to reduce their overall cost of compliance as expanding RFID tagging volumes are required. The study showed RFID automation and integration of data are critical elements in RFID economics. Xterprise benchmarking also showed many retail suppliers underestimated the value of adding some automation to their initial tagging solution and they underestimated the importance of deploying a solution that can effectively use RFID information from the retailer. The combination of these two elements is essential to minimizing cost and maximizing benefit for a positive ROI. Most companies who initially chose manual processes are finding the labor costs and the lack of data visibility are a hindrance to scaling RFID, and as a result are unable to extract supply chain value from their RFID implementations.

"We have a significant amount of experience understanding the nuances of these systems and managing the EPC data that they create, to enabled demand signaling decisions in the future," added Dan Ahearn, Vice President of Services for Xterprise. "Putting tags on boxes becomes the initial table stakes. You have to be able to do it reliably and efficiently, but as the requirements continue to scale upward from the retailers and you have to be able to support the increased tag requirements, the data analytics and the data exchange requirements that enable the ROI's we are building."

About Xterprise - - Xterprise Incorporated develops RFID supply chain solutions and has been chosen by the many of the worlds most respected supply chains and fastest growing companies as their RFID solution provider. Xterprise blends best practices, supply chain processes, material handling, RFID system hardware and application software, enterprise systems integration, data analytics, demand signaling applications and remote solution support.

Xterprise works with other RFID & Supply Chain industry leaders, including Alien Technology, Zebra Technology, Symbol, Apriso, Red Prairie, TrueDemand, DPI, Weber, and others. Stop by their booth at EPC Global this week and discuss with one of their professionals how they can help your company.

Xterprise is headquartered in Carrollton, TX and currently serves customers in Asia, Europe and North America. For more information, visit www.xterprise.com or call 972-690-9460, ext. 300.

Posted by Industrial-Manufacturing at 10:57 AM | Comments (0)

The First Seamless Mobility Server for PacketCable Introduced by Fixed-Mobile Convergence Solution Developer Ventego Networks

Ventego Networks introduces UniCell Server, the industry's first Seamless Mobility server for PacketCable. UniCell is the only Fixed-Mobile Convergence offering that complies with IMS 3GPP R6 specifications, while retaining full backwards compatibility with current fixed and mobile networks

Tel Aviv, Israel (PRWEB) September 12, 2005 -- Ventego Networks, a provider of end-to-end solutions converging fixed and mobile services over existing broadband networks, introduces UniCell Server, the industry's first Seamless Mobility server for PacketCable.

The UniCell server provides a Fixed-Mobile Convergence (FMC) solution that not only enables cable operators to offer quadruple play services, but also allows them to significantly extend their reach to serve customers with the best possible service, no matter where they happen to be, using industry-standard dual-mode celular handsets or "combo" phones.

UniCell is the only Fixed-Mobile Convergence offering that complies with IMS (IP multimedia subsystem)-3GPP R6 (Release 6) specifications, while retaining full backwards compatibility with current fixed and mobile networks.

Fixed-mobile convergence (FMC) revenues will reach $80 billions in 2009, or 6% of total communications spend worldwide, according to a new report from Pyramid Research. Converged service revenue growth will be derived from value-added services and the migration of digital content from broadcasting networks to new converged networks. Pyramid Research expects converged services adoption to accelerate after 2007 as more services are provided and consumers migrated to convergent platforms.

Ventego Networks’ UniCell Server was introduced at the CableLabs (Cable Television Laboratories) Summer 2005 Conference, the cable television industry's research and development consortium.

About Ventego Networks
Ventego provides end-to-end solutions converging fixed and mobile services over existing GPRS, UMTS, PSTN and IMS networks.

The company develops advanced software solutions based on 3GPP and IMS specifications. Using Ventego solutions, service providers can now deliver quality mobile voice, video and data over fixed broadband networks at minimum cost.

Founded in June 2004, Ventego has already secured an initial investment, and has several provisional patents. Ventego Headquarters and Research Center are located in Tel Aviv, Israel. For more information please visit Ventego Networks website at, http://www.ventegonetworks.com

Posted by Industrial-Manufacturing at 10:56 AM | Comments (0)

New iPod Battery Service Provider Differentiates Itself from the Competition with Robust Batteries, Detailed Instructions, Effective Tools, and Superior Service

ipodjuice.com sells battery replacement kits for all models of the Apple iPod and iPod mini and has experienced technicians that can replace the iPod battery for you.

San Antonio, TX (PRWEB) September 11, 2005 – ipodjuice.com, a new iPod battery service provider located in San Antonio, TX, provides battery replacement kits that uniquely differentiate them from the competition. "There are many companies that sell iPod batteries, but they don't provide customers with the proper tools or guidance, which results in frustration and, even worse, increases the likelihood of damaging the player", said Anthony Magnabosco, owner of ipodjuice.com.

ipodjuice.com is the only iPod battery provider that offers the iOpener a unique tool that efficiently opens an iPod or iPod mini. The iOpener has a sharp, wedge-shaped head that slips into the narrow seam of the player, and a long, solid handle. Other companies include cheap, flimsy tools that customers struggle or don't provide any tools at all. Also included with each kit are detailed instructions with vivid, color photographs that walk customers step-by-step through the iPod battery replacement process and highlight areas where caution is warranted.

In addition, ipodjuice.com provides robust batteries that far exceed the playtimes offered by the standard ones inside most iPod and iPod mini players. "It's not unusual to increase your playtime by several hours longer than what you used to get with your first iPod battery," added Magnabosco.

For those reluctant to replace the iPod battery themselves, ipodjuice.com has experienced technicians who can replace the battery in an iPod or iPod mini for as little as $20. "In most cases, iPod batteries are replaced the same day that we receive the device and ship back to the customer on the following business day," continued Magnabosco.

About ipodjuice.com
ipodjuice.com is a website owned by Milliamp Enterprises LLC, and specializes in providing iPod battery replacement kits and services for the Apple iPod™ and iPod™ mini only. ipodjuice.com doesn't perform any other types of repairs. Milliamp Enterprises LLC and the ipodjuice.com website are in no way associated with Apple Computer, Inc. iPod™ and iPod™ mini are registered trademarks of Apple Computer, Inc.

Contact Information:
Mr. Anthony Magnabosco, Owner
Milliamp Enterprises LLC
5886 De Zavala Road, Suite 102
San Antonio, TX 78249-2269
www.ipodjuice.com
Telephone: 800.809.8133
Facsimile: 210.568.9484

Posted by Industrial-Manufacturing at 10:55 AM | Comments (0)

New Compact Mpeg Encoder From Aitech Allows Efficient, In-The-Field Video And Audio Compression And Transmission

Chatsworth, CA (PRWEB) September 11, 2005 -- Aitech Defense Systems, Inc, a world leader in the development and manufacture of board and subsystem level products for harsh environment defense, aerospace and space applications, now offers a compact, real-time MPEG video/audio encoder implemented on a standard PMC that efficiently encodes either NTSC or PAL video into an MPEG-2 transport stream.

The M503 encoder is ideal for both rugged and military applications using real time video/audio compression. These include recording mission data in advanced target tracking weapons systems and transmitting video/audio surveillance data in unmanned ground and aerial reconnaissance vehicles.

The new M503, which employs an IBBP GOP video frame encoding mode at full D1 resolution (CCIR-601, CCIR-656) with industry-standard stereo MPEG layer 2 audio, enables in-the-field video and audio compression and transmission. The single-wide M503 – fully compliant with IEEE 1386.1-2001 – features pause and resume encoding as well as dynamic, user-defined encoder and video parameter adjustment to give users more control of image transmission and quality. In addition, adaptive prediction mode selection and frame/field DCT improve coding efficiency, especially for encoding interlaced video. The new M503 offers refiltering and color format conversion of 4:2:2 to 4:2:0. A companion PMC product – the M550 – provides real-time MPEG decompression to extract the video and audio data back to their original formats.

The M503 MPEG encoder consumes only 5W typical power in operation, features 12 MB of onboard RAM, supports 32-bit PCI bus operation at 33 MHz, and is fully compliant with the PCI Rev. 2.1 specification. The new M503 also incorporates front panel or backplane-based inputs.

Drivers supported include VxWorks and MS Windows 98 (vendor-supplied reference drivers). The M503 employs a universal PMC interface that supports both +5V and +3.3V PCI universal signaling levels, and is available in both air-cooled and
conduction-cooled versions.

Pricing for the M503 starts at $1,920. Delivery is from stock.

For more information please call 888-Aitech-8 (248-3248), visit www.rugged.com.

About Aitech
Established in 1983, Aitech offers military and space-qualified, commercial off-the-shelf (COTS) products for defense, aerospace and space applications, radiation tolerant and MIL-SPEC solutions; providing VMEbus and CompactPCI boards, power subsystems, mass memory, enclosures and hardware subsystem integration along with configuration and component obsolescence management services. In addition, Aitech utilizes its broad base of off-the-shelf products and technologies to develop customer-specific solutions, deliver superior cost-performance and reliability, and expedite time to market. Applications for its products range from mission processors, fire control and mission control subsystems for ground vehicles, surface and subsurface naval platforms, tactical and strategic fixed- and rotary-wing aircraft, and low- to high-earth orbit space vehicles.

Posted by Industrial-Manufacturing at 10:55 AM | Comments (0)

DecalGirl.com Announces New Skin Products for the Apple iPod Nano

DecalGirl.com, an industry leader in providing full-color adhesive vinyl skin products for electronic devices announced support today for the new Apple iPod Nano MP3 player.

(PRWEB) September 10, 2005 -- DecalGirl.com is pleased to announce the release of their removable vinyl "skin" kits for the new iPod(R) Nano handheld MP3 player. Specializing in full-color, high resolution photo-realistic designs, they offer the highest quality skin products on the market today. Beginning with premium vinyl with a patented removable adhesive, the skins are produced using a full-color, UV resistant digital printing process. Once printed, they're covered with a high-gloss protectant layer to prevent smudging, scratching or fading and are computer-cut to precisely fit the console. A strict quality assurance process ensures that each skin is of the highest caliber possible.

"We're thrilled to be one of the first to market with accessories for the newest device in the iPod family. We think it's important to give people the ability to personalize their iPods without voiding any warranty. Our new line of iPod Nano skins are priced under $6 and feature hand-selected, original, high-resolution full-color artwork." said Amanda Peters, Managing Director of DecalGirl.com. "Each of our designs are carefully selected for image quality, level of detail and position on the device; they're meant to enhance the appearance of the device."

Skins can be purchased online at www.DecalGirl.com or through any one of the hundreds of authorized retail outlets, websites and distribution partners worldwide. Reseller and distributor inquiries are welcome.

Recognized as a leader in the vinyl skin market, DecalGirl.com has a long history of innovation. They were the first company to offer skins for the slim-design Playstation 2(TM), the Nintendo GameCube(TM) controller, the Nintendo DS(TM), the Apple iPod Min(TM), and pushed the envelope with skin designs on the Microsoft Xbox(TM) console. Their products have been featured in such popular magazines as Nintendo Power(TM), Electronic Gaming Monthly(TM), Game Informer(TM), PlayList(TM) and others.

Posted by Industrial-Manufacturing at 10:54 AM | Comments (0)

TeleType Develops Affordable, New In-Car GPS Navigation System with MP3 Player

TeleType Company is launching an innovative product that blends cutting-edge vehicle GPS navigation with MP3 player technology. The all-in-one device, called WorldNav 3000 XL, is a portable, in-car navigation system that offers door-to-door GPS guidance with simple spoken instructions. The official release date for the product is scheduled for Sept. 15, 2005.

Boston, Mass. (PRWEB) September 10, 2005 -- TeleType Company is launching an innovative product that blends cutting-edge vehicle GPS navigation with MP3 player technology. The all-in-one device, called WorldNav 3000 XL, is a portable, in-car navigation system that offers door-to-door GPS guidance with simple spoken instructions. The official release date for the product is scheduled for Sept. 15, 2005.

WorldNav 3000 XL’s exciting convergence of portable in-car navigation with the immense popularity of the MP3 player makes it possible for travelers to not only reach their destination with greater efficiency, but to easily carry along their favorite music. There is no other product on the market that offers the exceptional utility, simplicity and affordability of this new piece of gadgetry.

"WorldNav 3000 XL is stylish, lightweight and easy to use, and we are excited to offer this device for a very reasonable price," said Marleen Winer, a spokesperson for TeleType.

Based on TeleType’s award-winning GPS product line, WorldNav 3000 XL is a compact system that weighs less than 8 ounces. The device is user-friendly and simple to operate, making it easy for drivers to get from Point A to Point B. To operate the system, drivers simply touch the screen where a simple menu is presented similar to in-dash navigation systems. The driver is then guided along the desired route effortlessly. Drivers can navigate directly to a point of interest (POI) using the extensive POI database included, or an exact business or home address, or even a desired intersection.

"The WorldNav product will be launched initially in the United States, Canada, and Puerto Rico. Localization and distribution is being expanded worldwide," Winer said.

Currently, the WorldNav 3000 XL offers the following features and benefits:
· Pre-installed, street-level maps for the entire USA, including Puerto Rico. A Canadian bundle will also be offered.
· Visual and voice prompts to direct drivers directly to their final destination point.
· Various settings that allow drivers to create the best possible routes.
· MP3 Player that can be used with your own SD or MMC card for expanded storage
· Can be mounted to the windshield and easily moved from car to car
· 3D view with pan and zoom functions
· Points of interest, landmarks, gas stations, restaurants, etc.
· USB cable for connection to PC for data and music transfer
· High-resolution touch screen with large buttons

The WorldNav 3000 XL is the latest in a long line of products created by TeleType to provide unique and versatile solutions for land, air and water navigation. Notable innovations by the company include: the first aviation navigation product for use on PDAs in flight, the first program to offer combination vector-based marine and car navigation for Pocket PCs, the first 16-channel Bluetooth receiver with 20 hours of battery life. Pushing the envelope of technology for Pocket PC computing, TeleType created the first program to offer the combination of street, air, water, land navigation with live weather, live traffic, topographic and aerial map support on Pocket PCs and Windows CE devices.

Established in 1981, TeleType has emerged to become a leader in the field of Global Positioning Systems. TeleType specializes in software system integration and produces innovative products for a variety of industries. GPS software solutions include support of Windows CE and Pocket PC for vehicle navigation, fleet tracking, and geographic information systems data collection. Current hardware solutions include low power, high-sensitivity GPS receivers. The company is also expanding to support additional emerging technologies for GPS solutions based on satellite communications, GPRS, and GSM with support for Pocket PC phones and other mobile devices.

TeleType’s WorldNav 3000 XL can be purchased conveniently online at www.teletype.com for a pre-order price of $399. For further information, contact TeleType Company at e-mail protected from spam bots, 1-800-717-4478, or 1-617-542-6220.

Posted by Industrial-Manufacturing at 10:53 AM | Comments (0)

Swann’s Latest Standalone DVR with Web Access Brings Professional Grade Security to the D-I-Y Industry

Swann Communications’ DVR4-Net with internet connectivity sets a new standard by combining the most features at the lowest price in the Surveillance Industry.

MIAMI (PRWEB) September 10, 2005 -- Swann Communications debuts the best value in the D-I-Y security market with the unveiling of their DVR4-Net digital video recording unit with internet connectivity. Retailing at $499, Swann’s DVR4-Net raises the bar for digital video recording by combining huge amounts of storage space and internet connectivity at the most competitive price in the industry.

Swann’s latest DVR records four camera feeds and plays back through any monitor or television. Control of the DVR4-Net is made simple through an on-screen menu display, enabling video recording to be activated manually or automatically via built in motion detection. The unit also gives the user the option to view all surveillance remotely through web access. With 250GBs of storage capacity, the DVR4-Net is capable of saving 6 months worth of data at the lowest setting and 7 days at the highest setting.

For cameras, Swann offers a huge selection of options that cater to the needs of do-it-yourselfers. One solution is the 4 Pack of Security Cameras, which bundles two high resolution outdoor cameras with two high resolution indoor cameras. Retailing at $399, the 4 Pack of Security Cameras represent the best value for professional grade surveillance.

For more information on the DVR4-Net or to learn about more of Swann Communications products, go to http://www.swannusa.com. To request the DVR4-Net and a selection of security cameras for review, please contact PR Specialist Brian Metcalf at (305) 576-1171 x5 or at e-mail protected from spam bots.

About Swann Communications:
Founded in 1988, Swann Communications is Australian owned and operated IT Peripherals company. Swann is committed to the development and support of new communication technologies and at the same time providing their customers with simple and cost effective solutions. While they are an IT peripherals company with products ranging from modems to Universal Serial Bus (USB) interfaces, and from FireWire technology products to DV Editing suites, they are strongly focusing their energy on security products.

Press Contact:
Brian Metcalf
Marketing Specialist
Max Borges Marketing Solutions
(305) 576-1171 x 5

Posted by Industrial-Manufacturing at 10:51 AM | Comments (0)

2004 & 2005 Stats Show Color Print-On-Demand Challenging Commercial Printing

Freeprinters.com President, Dennis Walthers commented today on analysis released from the NPES, the Association for Suppliers of Printing, Publishing and Converting Technologies.

Flower Mound, TX (PRWEB) September 10, 2005 -- Freeprinters.com President, Dennis Walthers commented today on analysis released from the NPES, the Association for Suppliers of Printing, Publishing and Converting Technologies.

''Stats from the last two years have shown that more than 60% of commercial printers feel that within the next two years, more than half their printing jobs will require 24 hour turnover or faster,'' says Walthers. The NPES has predicted that leading up to 2007, revenues from digital printing in the industry would continue to grow.

Taking advantage of this trend, Walthers has ignited what could be a controversy in the printing industry by offering wide format color laser printers free of charge to US based businesses. His company, known for distributing free printers to high volume users, is banking on this business model to bring down the cost of printing capital for small commercial printers and print shops.

The company requires no reporting, and clients do not need to print a minimum number of pages each month or each quarter. Participating businesses and organizations receive automatic monthly or quarterly shipments of ink cartridges at rates that represent up to 35% savings over prevailing retail prices for similar products with no additional shipping charges. The programs also include up to three years of free on-site service. Upon successful completion of the printer program, clients own their printers outright with no further monthly requirements.

The Lexmark C920 prints paper sizes up to 12'' X 48''. Freeprinters.com introduced this line of printer into its services for clients who have an increasing need to print in color but don't want to sacrifice quality, performance or much-needed funds."

Contact:

For interview opportunities, please contact:
Mark Buzan, Publicist – Freeprinters.com
Action Strategies Communications
(819) 770-2899

For sales information, please contact:
Dennis Walthers, President
www.Freeprinters.com (214) 764-3526

Posted by Industrial-Manufacturing at 10:51 AM | Comments (0)

September 09, 2005

Speedline Technologies Showcases Leading SMT Process Solutions at ATExpo 2005

Speedline Technologies, Inc., will showcase industry leading MPM printers, an Electrovert reflow oven and wave soldering equipment at ATExpo 2005, 27-29 September, in Rosemont, IL, booth number 5710.

Franklin, MA (PRWEB) September 9, 2005 -- Speedline Technologies, Inc., will showcase industry leading MPM printers, an Electrovert reflow oven and wave soldering equipment at ATExpo 2005, 27-29 September, in Rosemont, IL, booth number 5710.

Speedline’s exhibit at the show will spotlight the following systems from the comprehensive line of assembly equipment solution the company delivers to the electronics assembly and semiconductor packaging industries:

Speedline’s MPM AccuFlex printing system will be part of the live, working electronics assembly line at the center of this year’s show. The printer is ideally suited for moderate volume, high-mix printing at a cost-effective price. Combining accuracy and unparalleled flexibility in a compact footprint, the printer provides only what is needed for efficient and precise printing, while offering a comprehensive range of options for future expansion or demanding advanced processes. The system is designed for production of about 8,000 boards per week, with two or more product changeovers per shift.

In its booth, Speedline will spotlight its newest stencil printer, the MPM Accela printing system. The revolutionary new design and theory of operation in this printer have created a paradigm shift in the way electronics manufacturers view and measure printer performance. With the Accela’s innovative parallel processing technology the focus of measuring printer performance has shifted from base cycle time to total throughput, the more important criteria for manufacturers requiring high volume throughput with high yield performance. The new system produces the most boards per hour of any industry printer – delivering raw throughput gains of 20% to 80% over the closest competitor and generating more quality boards per hour; therefore increasing the return on capital investment.
The printer is also designed for ease of use, and features a completely new, robust design and easy-to-use operator interface. Offering superior accuracy and repeatability, this printer is well positioned for the challenge of lead-free assembly and the increasingly complex boards used throughout the industry.

Also on display will be Speedline’s Electrovert OmniExcel 7, a lead-free capable, 7-zone, forced convection reflow oven specifically designed to optimize operating efficiencies, reduce maintenance intervals, and lower life-cycle costs.

The system features an advanced chamber design for more balanced airflow with minimal turbulence, which improves heat transfer and substantially reduces power and N2 consumption. Compared to other platforms, the OmniExcel consumes up to 50% less power and up to 35% less nitrogen. Besides multiple other options the system can be equipped with Speedline’s proprietary self-cleaning Flux Extraction Systems (FES), delivering a dramatic drop in maintenance intervals from a typical weekly schedule to once per month, which translates into more uptime for our customers. Speedline’s newest enhancement, the OmniCheck monitoring system, delivers a cost-effective, redundant check on process temperatures and conveyor belt, and provides both extensive data tracking and monitoring capabilities of the process parameters.

In addition Speedline will exhibit two systems that simplify the process and enhance the quality of the lead-free manufacturing, its Electrovert Quick-Change Solder Module equipped with the new UltraFill Nozzle.

The Quick-Change Solder Module’s design allows for easy changeover between tin/lead and lead-free alloys and its cast iron solder pot and other components are resistant to the corrosive nature of lead-free solders and capable of withstanding temperatures of 315ºC (600ºF).

Speedline’s new UltraFill Lead-Free Nozzles feature an innovative technology and design to overcome a variety of process challenges inherent in lead-free wave soldering.

The nozzles are 40% wider than traditional tin/lead nozzles to increase contact length and dwell time. The nozzles are also placed closer together to reduce the temperature drop between the nozzles – so that less heat is needed to reflow solder joints in the second wave. As a result, UltraFill nozzles deliver better hole fill without requiring a slowing of the conveyor, while reducing bridge defects and dross production.

With the optional nitrogen shroud either air or nitrogen operation can be chosen; without the need to change nozzles. Recent applications have shown UltraFill nozzles enhance both product quality and process.

All of the featured solutions are immediately available from Speedline distributors and representatives. For more information, visit Speedline Technologies during ATExpo 2005 in booth number 5710, contact your Speedline distributor or representative, or reach Speedline Technologies at 1-508-520-0083 or http://www.speedlinetech.com.

ATExpo 2005 will be held September 27-29, 2005, at the Donald E. Stephens Convention Center, Rosemont, IL, USA.

About Speedline Technologies
Speedline Technologies is the global leader in process knowledge and expertise for the PCB assembly and semiconductor industries. Based in Franklin, Massachusetts, U.S.A., the company markets five best-in-class brands — Accel microelectronics cleaning equipment; Camalot dispensing systems; Electrovert wave soldering, reflow soldering, and cleaning equipment; MPM stencil and screen printing systems; and Protect global services, support, and training solutions. Speedline Technologies is Frost & Sullivan’s “2005 Surface Mount Technology Company of the Year.” For more information, visit: http://www.speedlinetech.com or contact Speedline at:
• USA: Speedline Technologies, 16 Forge Park, Franklin, MA 02038 USA, Tel: 1-508-520-0083, Fax: 1-508-520-2288, E-mail: e-mail protected from spam bots;
• Europe: Speedline Technologies GmbH, Im Gefierth 14, 63303 Dreieich, Germany, Tel: +49 (0)6103/832-0, Fax: +49(0)6103/832-299, E-mail: e-mail protected from spam bots;
• Asia: Speedline Technologies Asia Pte Ltd, 150 Kampong Ampat, #05-08 KA Centre, Singapore 368324, Tel: 65-6286-6635, Fax: 65-6289-9411, E-mail: e-mail protected from spam bots.

Note to Editors:
Download high resolution photo for publication from: http://www.tizinc.com/speedline/images/

Posted by Industrial-Manufacturing at 11:43 PM | Comments (0)

Reduce IC Packaging Costs with Screen-Printable B-Stage Epoxy

B-stageable thermally conductive Epoxy adhesive increases product performance and controls manufacturing costs.

Tyngsboro, MA (PRWEB) September 9, 2005 -- The application team at Creative Materials, Inc., has introduced a screen-printable, b-stageable, highly thermally conductive epoxy adhesive for integrated circuit (IC) packaging. This material is designed to increase product performance through the use of b-staging, while reducing manufacturing costs through screen-printing. Creative Materials’ 122-07(SP) features excellent thermal stability, outstanding chemical resistance and excellent high temperature properties. The thermal cure cycle produces cross-linked, void free bonds.

B-stage is an intermediate stage in the reaction of a thermosetting resin where the adhesive softens when heated at a low temperature (110°C -125°C) for a brief time period (minutes) and is non-tacky when cooled to room temperature.

At this stage the adhesive is not fully cured. With B-staging, the product can be held for a period of time prior to curing, without sacrificing performance. Attempts to use traditional epoxies in IC manufacturing have often created expensive production bottlenecks, because the components had to be assembled and cured immediately in small batches. B-staging eliminates these bottlenecks by allowing the IC manufacturing to proceed efficiently, with operations performed on larger batches.

B-staging provides the added advantages of a very thin bond line that helps in the dissipation of heat and provides flexibility for mismatched substrates. Performance of Creative Materials’ 122-07(SP) is increased by allowing solvent release without advancing the resin cross-linking. After b-staging, the adhesive and substrate can be held for a period of time before bonding, thus reducing the tendency of the adhesive to flow beyond location of application.

Creative Materials’ 122-07(SP) employs the cost effective technology of screen-printing that enables high volume manufacturing. Applications for this material include, but are not limited to, die attach, printed circuit board fabrication, advanced material composites, sealing, and high performance coatings.

About Creative Materials, Inc.
Creative Materials, Inc. develops and markets specialty chemical products to customers world-wide. Founded in 1986, Creative Materials has its headquarters and production facilities in Tyngsboro, Massachusetts. Products from Creative Materials are used to manufacture RFID tags; electronic components for automobiles, computers, keyboards, and cell phones; medical electrodes and medical instruments; heating equipment; and aerospace devices. Creative Materials offers more than 1000 product formulations, and is ISO 9001 certified. For additional information please visit http://www.creativematerials.com/.

Posted by Industrial-Manufacturing at 11:42 PM | Comments (0)

John Corless Joins CRLO Displays Dalgety Bay, Scotland

Dr. John Corless of Santa Rosa California has joined CRLO Displays as Optical Engine Development Manager.

(PRWEB) September 9, 2005 -- CRLO Displays announces that Dr. John Corless of Santa Rosa, California, has joined the firm as Manager, Optical Engine Development.

Previously, Corless was a Research Manager and Engineering Manager with JDS Uniphase, where he led the successful development of optical engines for High Definition Rear Projection Televisions (HD-RPTVs).

"John's accomplishments in integrating microdisplays and optical engines, combined with his proven technical and management skills, make him a valuable addition to our team," said Leslie G. Polgar, CEO of CRLO Displays.

"John's optics expertise complements our established capabilities in Ferroelectric Liquid Crystal on Silicon (F-LCOS) microdisplays," said Greg Truman, COO.

Corless holds a PhD in Optics and an MS in Optical Engineering, both from University of Rochester, and an MBA from the University of San Francisco.

He will initially be based in CRLO Displays' new offices in Walnut Creek, CA (San Francisco Bay area). He and his family will later relocate to Dalgety Bay, Scotland.

CRLO Displays Ltd. was formed in September 2004 through investments by Amadeus Capital Partners and Doughty Hansen Technology Ventures.

Posted by Industrial-Manufacturing at 11:38 PM | Comments (0)

BusinessEdge Solutions Leverages Latest in Microsoft Technology To Enable Nimble Deployment of a Field Force Application

Smart Manager Platform, a field force optimization tool that leverages the latest Microsoft technology, allows field force 20% more time in the field.

East Brunswick, NJ, (PRWEB) September 9, 2005 -- BusinessEdge Solutions Inc., an East Brunswick, NJ based industry-focused business and technology consulting firm, announced a client deployment of its Next Generation Smart Manager Platform (SMP), a field force optimization tool that leverages the latest Microsoft technology to allow client firms to quickly and affordably develop and deploy mobile applications, improving field force effectiveness, enhancing market share and increasing revenues.

SMP leverages Microsoft .NET framework’s latest in Smart Client and Occasionally Connected Computing (OCC) technology, Microsoft Visual Studio 2005® and NetAdvantage™, the development toolset from Infragistics®, a leading publisher of presentation layer tools and services, to create an integrated mobile productivity application. This application establishes a nimble environment for developers, and provides a familiar and rich interface for end users that requires minimal ongoing support, and ensures quick and widespread enterprise adoption. The use of Smart Client technology extends the system functionalities of a client’s legacy infrastructure, transforming it into a new mobile operating environment while protecting the firm’s previous systems investments. This enables the comprehensive automation of field support systems and significantly increases the time available to spend in the field.

The six-month BusinessEdge Solutions SMP rollout enabled field operatives at the client firm to effectively access relevant information, complete tasks and share information anywhere, anytime. Now, more productive, the field operatives at the client firm spend as much as 80% of their time in the field – an increase of 20% – while decreasing the administrative overhead that constrained their ability to be responsive to revenue-generating opportunities prior to SMP implementation.

Field operatives have typically been inundated with information and requests for information from all directions, and burdened by administrative and reporting responsibilities. This has limited their time in the field as well as their ability to take advantage of actionable opportunities to boost sales and impact overall organizational effectiveness.

SMP mitigates these constraints, by providing field operatives with complete visualization of relevant data from multiple sources and systems. SMP delivers personalized metrics and alerts, enables the integration of work tasks and documents, and affords an integration layer that connects the dashboard to the existing portfolio of systems to provide transparent synchronization between mobile devices and backend systems.

The smart manager platform offers user companies business agility, quick time-to-market, ease of integration, increased productivity and a low cost of ownership. Powerful visualizations of key metrics also enable field operatives to rapidly determine the status of their territories and the performance of their products. All of these business advantages are made possible by the Microsoft. NET-based solution

“The .NET Framework and Visual Studio 2005 provide a comprehensive and flexible toolset that enable BusinessEdge Solutions to quickly and collaboratively provide a powerful application that seamlessly interfaces with existing systems and infrastructure while providing the familiar MS-Office UI environment that is the standard for many field operatives in all sectors,” says Mark Hayward, chief technology officer at BusinessEdge Solutions. “Smart Client, along with ClickOnce, the Web deployment for smart client applications, are major steps forward – allowing BusinessEdge to continually build advanced capabilities into the core product, facilitating quick adoption of new tools and minimizing technical support requirements without compromising the robust feature sets the platform offers.”

About Infragistics
Infragistics is the market leader in providing a broad range of presentation layer development tools and services for building applications utilizing Microsoft .NET, COM, and Java environments. Over the past 16 years, Infragistics has received over 220 product awards and industry vendor of the year awards from market-leading publications and resellers. Infragistics' diverse product line for Windows Forms, ASP.NET, Tablet PC, COM, and Java environments are used worldwide in nearly every Fortune 2000 Company. For more information on Infragistics development tools, please visit www.infragistics.com.

About BusinessEdge Solutions
BusinessEdge Solutions Inc. is an industry-focused business and technology consulting firm offering operational strategy, business process and systems integration solutions to clients in the communications, financial services and insurance, and life sciences industries. The company drives competitive advantage for its clients by leveraging innovative Velocity Platforms, visualizations of breakthrough business solutions; Reusable Solution Accelerators (RSAs) to reduce the time, cost and risk of client engagements; and EdgeWareTM, pre-engineered solution frameworks. The Smart Manager Platform is one of the firm's many EdgeWareTM solutions. See www.businessedge.com for a complete listing of all solutions and service offerings.

All other marks are either trademarks or registered trademarks of their respective owners.

Posted by Industrial-Manufacturing at 11:38 PM | Comments (0)

Frontier Silicon Demos Multi-standard Mobile TV and Radio

At IBC2005 (stand no: 6.006), Frontier Silicon shows its DVB-H mobile TV demo for the first time, and a live T-DMB reception demo using its Kino chip set.

London (PRWEB) September 9, 2005 -- Frontier Silicon - the leading fabless manufacturer of semiconductors for mobile digital television (MDTV) and DAB digital radio products – will show its complete digital TV and radio reception capability for mobile applications using T-DMB, DVB-H and DAB technologies.

Among the demonstrations on its stand will be its first showing of DVB-H mobile TV, following the company's announcement of its multi-standard, multi-band chip set development strategy for mobile TV and radio.

The company's T-DMB mobile TV chipset, branded Kino, is already sampling to multiple customers planning production towards the year end. Frontier Silicon's DVB-H technology expands its mobile TV product portfolio and the first public demonstration of this development will be showcased at IBC2005.

Anthony Sethill, CEO of Frontier Silicon, said, “The next 12 months will be very significant for the emerging mobile TV market, with commercial launches across Korea, USA, Japan and Europe and multiple transmission standards being used regionally due to issues of regulation, spectrum availability and installed infrastructure. Frontier has invested in developing multi-band/multi-standard solutions – this way our customers can support multi-region standards and reduce risks in trying to predict which standard will win out across which region. This approach will drive the roll-out of mobile broadcast TV and address the deployment uncertainties facing handset manufacturers.”

Other demonstrations to appear on Frontier Silicon's stand are live Korean T-DMB compliant mobile TV reception using Frontier Silicon's Kino chipset, and the recently announced DABplus capability enabling personal-video-recorder (PVR) like capabilities on digital radio broadcasts. The former was very successfully demonstrated at the IFA2005 fair in Berlin last week.

Editor's notes:

About Kino
Kino is based on META™ and UCC™ IP licensed from Imagination Technologies.

About Frontier Silicon
Frontier Silicon is an award-winning company at the forefront of the digital multimedia revolution with a range of semiconductor solutions for mobile digital television, digital TV and digital radio. The company develops and delivers both the broadcast signal receiver modules and digital processing circuits as individual chips and complete system modules to leading consumer electronics and mobile phone brands.

As a fabless semiconductor business, Frontier Silicon's core products include complete DAB modules, DVB-T solutions, DMB (digital multimedia broadcasting) solutions, and the underlying system-on-chip (SoC) devices and receiver chips.

Key customers for the company's products include consumer electronic, automotive entertainment and PDA/mobile phone manufacturers such as Bang & Olufsen, Cambridge Audio, Goodmans, Grundig, Hitachi, Ministry of Sound, Philips, PURE Digital, Roberts Radio, Samsung, Sharp, Sony and TEAC. Frontier Silicon has won a number of awards and its products have also enabled award-winning consumer products. The company's awards include the Fabless Semiconductor Association's start-up to watch award, PricewaterhouseCoopers hottest technology company of 2004 award, the World Economic Forum's technology pioneers to watch 2005, and the Tornado T100 award for one of the best-performing and innovative high-tech private companies.

Posted by Industrial-Manufacturing at 11:36 PM | Comments (0)

Wholesale Consumer Electronics

New online consumer electronics wholesaler, LoneWolfDigital.com is making waves in the electronics industry.

(PRWEB) September 9, 2005 -- LoneWolfDigital.com offers consumers brand name electronics at wholesale prices.

Consumers from all around the U.S. have been getting online to buy their next MP3 Player or Home Theater System from www.lonewolfdigital.com. Offering everything from cell phones to plasma screens and iPods to laptop PC’s, Lone Wolf Digital will take care of all your electronic needs. One customer was quoted saying “I never thought purchasing electronics online was a good idea until I worked with LoneWolfDigital.com. Their selection and prices are amazing”. Founder and President, Jeremy Danielson offers this promise to consumers, “At LoneWolf Digital we are dedicated to providing the highest quality electronics at wholesale prices. If we don’t have what you’re looking for we will find it for you, even if we have to send you to our competitors”.

The LoneWolf Digital website is very easy to navigate with a product search tool and category listings to help you find the electronics you need. Also offered is the “Wolf Pack”, a monthly special offered to registered users of www.lonewolfdigital.com. These specials offer an even greater discount on top of the already low prices.

www.lonewolfdigital.com was opened in July 2005 and has seen huge sales growth in its first two months. Consumers are encouraged to explore the website and all it offers.

LoneWolfDigital.com is privately owned and operated by LoneWolf Inc, a Seattle based marketing firm.

Posted by Industrial-Manufacturing at 11:36 PM | Comments (0)

Stunning New Sony WALKMAN MP3 Players Announced

26 years after WALKMAN created a revolutionary music lifestyle, the new Sony WALKMAN will now redefine it. Simply called 'WALKMAN,' the new Sony MP3 player features spectacular ergonomic design and an exciting range of intelligent features that allow owners to enjoy music in a totally new way.

PRWEB) September 8, 2005 -- Stunning new Sony WALKMAN MP3 players announced.

26 years after WALKMAN created a revolutionary music lifestyle, the new Sony WALKMAN will now redefine it. Simply called 'WALKMAN,' the new Sony MP3 player features spectacular ergonomic design and an exciting range of intelligent features that allow owners to enjoy music in a totally new way.

Full story at http://products.sony.co.uk/walkman_hd.asp

Sony WALKMAN, available in two capacity sizes - 20GB (NW-A3000) and 6GB (NW-A1000), also features two new shuffle functions. By selecting 'My Favorite Shuffle,' the Sony MP3 player automatically selects the most listened to 100 songs and plays them at random. The 'Time Machine Shuffle' function randomly selects a year and plays all of the songs from that particular year that are currently held on the device.

Sony WALKMAN is a true extension of the user's personal taste and musical preferences. At the press of a button, the 'Artist Link' function will search every artist, album and song stored on the MP3 player and offers suggestions of artists and bands closely linked to the genre of music being played at the time.

Featuring an advanced organic EL display (2 inches on the 20GB NW-A3000 version and 1.5 inches on the 6GB NW-A1000 model), Sony WALKMAN not only incorporates a range of great features, it also offers the ultimate in ease of use through an appealing user interface and fantastic visibility.

Once switched on, a mobile phone style 'Home' menu appears offering nine different options that can be selected via the four-way directional button. These include 'Music Library,' 'Play Mode,' 'Initial Search,' 'Intelligent Shuffle,' 'Favorite 100,' 'Play History,' 'Settings,' 'Playlist' and 'Now Playing.'

Music can be searched in a variety of ways, via 'Genre,' 'Artist,' 'Album,' 'Song,' 'Release Date,' 'Rating' and 'Recently Transferred,' all of which can be scrolled through to enable users to find their music faster and easier. Sony WALKMAN records three years of playback history that can be searched and also features the first ever 'Initial Search' on a hard disc device, allowing the user to scroll from A-Z for ultimate ease of use.

"We are raising the bar with the new Sony WALKMAN," said Gregory Kukolj, General Manager at Sony Europe. "These stunning new MP3 players will be instantly appealing to both style followers and technology-minded individuals alike. One drawn by the spectacular design and the other by the outstanding ease of use and features that really deliver. The new Sony WALKMAN is an irresistible proposition for people who want the ultimate digital music player."

The 20GB Sony WALKMAN is available in two stylish colours, violet and silver; while the 6GB unit comes in the additional colours of pink and blue. All models are packaged with colour-coordinated headphones.

The NEW WALKMAN will be simultaneously introduced with a whole range of design-matching accessories such as a stylish remote control for easier navigation, various carrying cases, a docking station for convenient connection with the PC as well as a docking speaker system giving the option to both connect to a PC as well as playing music through the speakers.

Sony WALKMAN features ATRAC3plus and MP3 playback and ships with the new "CONNECT Player" that offers advanced music library management as well as providing seamless access to the CONNECT™ catalogue of more than one million tracks and albums available for download.

"CONNECT Player" incorporates a new and improved user interface that features a simple 'drag and drop' function for easy transfer from library to player. "CONNECT Player" supports the new functions within Sony WALKMAN as well as providing automatic software updates and increased Codec support.

NOTES TO EDITORS
Please find below further details about products and services highlighted in the Press Release:

CONNECT™ - Music downloads powered by Sony
Sony Europe launched its European online music download service in July 2004, starting in the UK, France, Monaco and Germany, and now available in the Netherlands, Austria, Switzerland, Belgium, Luxembourg and Ireland. CONNECT™ offers more than one million songs including albums and singles from both major and independent record labels and focuses on creating locally adapted services. Tracks are available in the ATRAC3 format at a price starting at €0.99 per track, or £0.79 in the UK.

CONNECT™ is available at www.connect-europe.com

ATRAC3plus
ATRAC3plus is the audio compression technology from Sony. Consumers can choose different levels of compression when recording music from CDs onto their PC using CONNECT Player. ATRAC3plus has been developed to offer the best sound quality, especially at high compression rates.

For more information, please contact:
Jean-Baptiste Duprieu, Sony Europe
email: e-mail protected from spam bots

About Sony
Sony manufactures audio, video, communications and information technology products for the global consumer and professional markets. With its music, pictures, game and online businesses, Sony is uniquely positioned to be one of the World's Leading Consumer Brands. Sony recorded consolidated annual sales of EUR 53.43 billion (yen 7,160 billion) for the fiscal year ended March 31, 2005 and it employs approximately 151,400 people worldwide.

In Europe, Sony recorded consolidated annual sales of EUR 12.03 billion (yen 1,613 billion) for the fiscal year ended March 31, 2005, based on an average market exchange rate for the same period of yen 134 to the EUR. Sony Europe, headquartered at the Sony Center am Potsdamer Platz in Berlin, is responsible for the company's European electronics business and registered consolidated sales of EUR 8.87 billion for the fiscal year ended March 31, 2005.

For more information on Sony Europe, please visit http://www.sony-europe.com and http://www.sony-europe.com/presscenter

Posted by Industrial-Manufacturing at 11:33 PM | Comments (0)

Sony Announces 10.3 Effective Megapixel Digital Camera with Zeiss 24mm Wide-Angle Lens

All-in-One professional quality solution The Sony Cyber-shot R1 is the world's first digital camera that combines a large 10.3 effective Megapixel CMOS sensor, and a high quality 24mm - 120mm (35mm) ZEISS Zoom lens in the same body, allowing 'live' viewing with the free-angle LCD screen. It is the latest breakthrough in high-class image quality at an affordable price.

(PRWEB via Spex Co.UK) September 8, 2005 -- Sony announces 10.3 Effective Megapixel Digital Camera with Zeiss 24mm Wide-Angle Lens.

Professional image quality, integral wide angle - telephoto lens, revolutionary shooting style

All-in-One professional quality solution
The Sony Cyber-shot R1 is the world's first digital camera that combines a large 10.3 effective Megapixel CMOS sensor, and a high quality 24mm - 120mm (35mm) ZEISS Zoom lens in the same body, allowing 'live' viewing with the free-angle LCD screen. It is the latest breakthrough in high-class image quality at an affordable price.

Full story at http://products.sony.co.uk/sony_dsc-r1_asp.asp

Large Size 10.3 effective Megapixel CMOS
Top-class image quality is guaranteed through the inclusion of a large-sized Sony CMOS image sensor (effective 21.5mm x 14.4mm), uniquely designed to significantly improve dynamic range, sensitivity, and signal-to-noise ratio. The large Sony CMOS sensor is able to capture more light, reducing noise levels, allowing higher shutter speeds, and therefore reducing the effects of handshake for beautifully clear, true to life pictures. Picture blur is significantly reduced because of the camera's high sensitivity capability, with noise being simultaneously reduced as a result of the newly developed Clear RAW NR feature. The signal is amplified within each pixel, resulting in ultra-fast signal transfer, no smear and ultra low power consumption.

Carl Zeiss Vario-Sonnar T* quality and flexibility
The dedicated 24mm-120mm (35mm) wide-angle zoom lens of the Cyber-shot R1 is integrated into the body of the camera. With its F2.8-4.8 aperture, the camera is designed to exacting specifications for optimum performance, reduced internal reflections and fast, quality photography, even at low light levels. Images taken by the Cyber-shot R1 are razor-sharp with excellent colour and contrast rendition.

The unique 'short back focus design' of the Cyber-shot R1 also allows the last lens to be positioned immediately in front of the CMOS sensor, contributing to a reduction in chromatic aberration. On the Cyber-shot R1 this distance has been reduced to an astonishing 2.1mm.

The flexibility of the lens design also means there is no need to change lenses to capture the shot you want. This allows the Cyber-shot R1 to be exceptionally fast in use - faster than most other high-end cameras. For example, the Cyber-shot R1 is capable of taking a macro of a butterfly, zooming in on an object in the distance, and then taking a wide-angle landscape shot, all within a few seconds without the need for changing lenses.

The fixed-lens design of the Cyber-shot R1 provides enhanced durability, reducing the risk of dust or foreign bodies scratching or damaging the sensor as a result of multiple lens changes. The lens block designed specifically for the Cyber-shot R1 is made up of 10 groups of 12 elements, four of which are aspherical.

Sony and Carl Zeiss in partnership
Working with Carl Zeiss, Sony has developed a highly qualified high performance lens to realise a higher contrast and resolution even at the edge of images. The lens of the Cyber-shot R1 has been designed through simulating MTF (Modulation Transfer Function) and chromatic aberration. Additionally, the Carl Zeiss T* multi layer coating, already appreciated by professional photographers the world over, ensures higher quality images with vastly reduced ghosting and flare.

Real Imaging Processor for ultimate performance
The Real Imaging Processor has been further enhanced for the Cyber-shot R1 to provide more detailed, purer and vivid colours. The white balance accuracy has also been improved to differentiate between indoor and outdoor shooting, producing more precise colour. The microprocessor has been further customised for the large CMOS image sensor, resulting in a much shorter response time and greatly reduced image noise. With it's ultra-low power consumption, STAMINA power efficiency, and the use of an intelligent InfoLITHIUM battery, the Cyber-shot R1 can carry on shooting for an amazing 500* shots, without the need for recharging the battery.

Free-Angle LCD to shoot like no other
The inclusion of a large 2.0-inch "Over Head" free-angle LCD screen, facilitates a revolutionary approach to shooting with the Cyber-shot R1, unique in its class. Combined with the ultra-bright (luminance 600 Cd/m2) screen, the swivel action allows you to shoot from horizontal or vertical levels, high or low angles or waist height, to maximise creativity.

High sensitivity for reduced blur
Picture blur is significantly reduced because of the high sensitivity capability of the Cyber-shot R1. Traditionally this would lead to an increase in noise, however with the use of the large size CMOS sensor, and the newly developed Clear RAW NR feature, the signal to noise ratio is improved. The Clear RAW NR original algorithm system reduces colour and luminance noise, enabling shooting with significantly higher sensitivity than current Cyber-shot models, using a selectable ISO sensitivity mode (up to ISO 3200). This ensures images with less noise and finer detail. This especially benefits customers when they shoot in low-light conditions, or when shooting moving objects.

A.G.C.S for rich colours and optimal contrast
The Cyber-shot R1 features an Advanced Gradation Control System to obtain optimal image contrast. The capability to evaluate distribution of the brightness on-screen and apply an appropriate Gamma curve (luminance distribution) means that images can be altered in real-time for a clearly defined image. For example shooting in difficult conditions such as a poorly lit subject and brightly lit background is not a problem for Cyber-shot R1 - using the A.G.C.S. feature, brightness can be balanced out, ensuring an evenly lit image.

Advanced display for live preview
You can view a 'live' preview of the shot you are framing, so you can clearly see what the end result will look like before you take the shot. The improved display layout on the Cyber-shot R1 shows the basic camera settings such as shutter speed, F number, and EV diagram in the bottom area of both LCD and EVF without overlapping the subject in the image area. In addition to the basic settings, the following functions provide further assistance when shooting:

- Histogram
The display shows a live histogram when shooting, ideal for adjustment of brightness. Additionally, in playback a histogram also appears for each of the three separate RGB colours, this is ideal for checking the detailed balance of each colour and then making necessary adjustments.

- Zebra Pattern
This uses black and white stripes (Zebra Pattern) to indicate areas where the brightness exceeds a certain level resulting in burnt-out highlights. The exposure can then be adjusted accordingly.

- Grid lines
This helps when photographing a horizontal or vertical subject. It can also be used artistically and creatively when composing a picture to a particular pattern.

- Enlarged Focus
The focusing point appears in an enlarged image when the manual focus ring is used, for more accurate focusing.

Choose your JPEG colour mode
Users now have a choice of three colour modes on the Cyber-shot R1:
- Standard (sRGB): a Sony-developed colour arithmetic process used on all Cyber-shot cameras, giving natural and true colour reproduction.
- Vivid (sRGB): lowers brightness and emphasises primary colour depth for impressive results with Reds, Greens and Blues, rather like a saturated slide film. Scenes like a deep blue sky, an intense red flower, and spectacular green scenery will be expressed with lively vivid colour.
- Adobe RGB: increased gamut (colour range) for a larger colour space and better reproduction, to meet professional and high quality picture environments such as desktop publishing with Adobe Photoshop.

Image Data Converter SR for picture adjustment flexibility
Of course, RAW mode is also available for the most demanding users, allowing the highest picture quality with no compression, and preserving the original RGB data and camera settings. The supplied RAW development software (Image Data Converter SR) is particularly versatile compared to competitors' software. It incorporates fast processing, display and development, with improved operability such as dual view and navigator windows. The software allows adjustment of the white balance and exposure, colour modes such as Vivid or Standard, and provides high compatibility with Adobe Photoshop.

Share
The Cyber-shot R1 also features PictBridge, the standard for printing directly to photo printers, such as the Sony DPP-FP50. Pictures can be printed conveniently with the USB Direct Print option.

The next stage
The Cyber-shot R1 has a range of dedicated optional accessories to further extend the shooting possibilities, from wide and tele lenses, to ND and PL filters, from cases and bags to versatile external flash units.

Your language
Sony has increased the choice of local menu languages to a staggering 15 on the Cyber-shot R1, another great solution to ensure easier operation. Menu languages now include: Czech, Danish, Dutch, English, Finnish, French, German, Hungarian, Italian, Norwegian, Polish, Portuguese, Russian, Spanish, and Swedish.

The Cyber-shot R1 will be available throughout Europe from mid- November 2005.

NOTES FOR EDITORS
Please find below further details about products and services highlighted in the Press Release:

Shooting style revolution
The Cyber-shot has been designed from the ground up with picture quality and operability number one priorities. The Free Angle LCD screen allows shooting from angles not possible with digital SLRs. The shutter release has been positioned in an ergonomic location, and creative flexibility controls such as ISO, WB, Flash Mode, AF Mode and one-push AF are all positioned within easy reach of the left thumb area. Primary shooting controls (shoot, playback, magnify, move/check focus, and delete) have all been placed around the right thumb area.

Fast response
The Real Imaging Processor at the heart of the Cyber-shot R1 has been enhanced further so in Preview mode the camera is ready to shoot a remarkable 0.68 seconds after it is switched on. The shutter time lag is only 0.29 seconds, shutter release lag is only 0.0075 seconds and the camera can take up to three photographs in quick succession at a speed of 3 fps in high speed burst mode.

Storage and Connectivity
Compact memory storage is provided by optional Memory Stick and Memory Stick PRO, alternatively the Compact Flash (Type I/II) slot allows storage on Compact Flash or Micro Drive media. Connectivity options include Hi-Speed USB 2.0 and an enhanced version of the PictBridge interface provides a way for the Cyber-shot R1 to connect directly to a compatible printer without the need for a PC.

Time (Bulb) Exposure
In addition to the manual shutter speed ranging from a flexible 30 seconds to 1/2000 second, the Cyber-shot R1 has a Time Exposure function which enables the user to control exposure time depending on their requirements - up to 3 minutes.

Rear Synchro
With Rear Synchro mode, the flash fires just before the shutter closes so that any light traces grow towards the back of a moving subject. This function can be combined with the regular Slow Synchro mode (flash produces a light trace in the direction of movement) for original and creative flash photography.

Accurate Manual Focusing with one-push AF
When focusing with Manual Focus mode, the one-push AF (PUSH AUTO) button on the left side of the camera body can help focus the subject more easily and quickly. The focusing area can be adjusted using the focus frame and multi-selector that appears on the LCD screen, finally the focus can then be manually adjusted.

Improved Electronic Viewfinder
The new EVF on the Cyber-shot R1 has an improved optical system with three lenses, for a lower distortion and aberration and better eye position. The image resolution is also higher than on previous models. The camera seamlessly switches between the EVF and the LCD using an eye sensor. Both can show zebra stripes as well as the newly designed information display.

Monitoring Mode
The Cyber-shot R1 offers two different monitoring modes, Framing and Preview. The Framing Mode reduces flicker under fluorescent light, and the screen is brightened to view the subject more easily, so is ideal for use indoors or in low light conditions. Preview Mode, on the other hand, reflects the true camera settings such as the aperture and shutter speed so that you can confirm the real depth of field before shooting.

Linear Focus
Sony has developed an ultra-efficient Linear Focus system for the Cyber-shot R1. This direct drive system uses a motor without gears, resulting a super-fast response and extremely accurate focus.

Silent Operation
As the Cyber-shot R1 does not have a mirror and there is no shutter sound, you can discretely use the camera in situations where you would hesitate with a traditional camera, such as at a concert, in a museum, or on safari.

Advanced Accessory Shoe
This shoe supports wireless connections, pre-flash and automatic adjustment for the best exposure. It can also be used with conventional flash units for analogue cameras if they have compatible connections. Of course, the Cyber-shot R1 also incorporates a strong pop-up flash unit for convenient low-light shooting on the go.

Supplied accessories
Sony also includes a variety of accessories with the Cyber-shot R1. These include InfoLITHIUM Battery, AC adaptor, video cable, USB Cable, shoulder belt, flower hood and Software.

Optional accessories
A choice of optional accessories are available including: Tele conversion lens (VCL-DEH17R), Wide conversion lens (VCL-DEH08R), ND filter (VF-67ND), PL filter (VF-67CP), Soft Jacket Case (LCJ-RA) and Hard Case (LCH-RA).

Key specifications:
Cyber-shot R1

* Large Sized 10.3 effective Megapixel CMOS Sensor
* 24-120mm (35mm) Carl Zeiss Vario-Sonnar T* Lens
* High MTF Performance
* Free Angle 2.0" LCD
* 3 Colour Reproduction Modes (Standard/Vivid/AdobeRGB)
* Advanced Gradation Control System
* High Speed Burst 3.0fps
* Dual Slot for Memory Stick and Compact Flash / Micro Drive (typeI/II)
* Zebra Display
* One Push AF
* Quick Operation (Preview mode - Start-up 0.68 sec, Shutter Time Lag 0.29 sec, Shutter Release Lag 0.0075 sec)
* STAMINA Battery Life (approx 500* shots)
* RGB Histogram
* Real Time Preview
* Conversion Lens Compatible (Optional)
* Advanced Accy Shoe
* Real Imaging Processor
* Aperture/Shutter Priority and Manual Exposure Mode
* RAW Data Recording
* AF Illuminator
* USB 2.0 High Speed Transfer
* Scene Selection Mode
* PictBridge Compatible
* 15 Menu Languages (English, French, German, Italian, Spanish, Portuguese, Dutch, Russian, Swedish, Norwegian, Danish, Finnish, Polish, Hungarian, Czech)

* The measurement method is based on the CIPA standard recording on Memory Stick (CIPA: Camera & Imaging Products Association).

Subject to errors and technical changes.

For further information, please contact:

Jean-Baptiste Duprieu, Sony Europe
Tel: 0044 1932 817 349/ email: e-mail protected from spam bots

Maria Heavey, Sony Europe
Tel: 0044 1932 817 383 / email: e-mail protected from spam bots

In addition, for any queries about Sony in your respective country, please contact your local Sony PR office.

About Sony:
Sony manufactures audio, video, communications and information technology products for the global consumer and professional markets. With its music, pictures, game and online businesses, Sony is uniquely positioned to be one of the World's Leading Consumer Brands. Sony recorded consolidated annual sales of EUR 53.43 billion (yen 7,160 billion) for the fiscal year ended March 31, 2005 and it employs approximately 151,400 people worldwide.

In Europe, Sony recorded consolidated annual sales of EUR 12.03 billion (yen 1,613 billion) for the fiscal year ended March 31, 2005, based on an average market exchange rate for the same period of yen 134 to the EUR. Sony Europe, headquartered at the Sony Center am Potsdamer Platz in Berlin, is responsible for the company's European electronics business and registered consolidated sales of EUR 8.87 billion for the fiscal year ended March 31, 2005.

For more information on Sony Europe, please visit http://www.sony-europe.com and http://www.sony-europe.com/presscenter

Posted by Industrial-Manufacturing at 11:32 PM | Comments (0)

September 08, 2005

Mr Test Equipment Announces Free Delivery & Pick Up in Ontario, Canada

Mr Test Equipment is pleased to announce free delivery for all sales and free pick-up and delivery for all service, repair and calibration work within Ontario Canada.

(PRWEB) September 8, 2005 -- Mr Test Equipment is pleased to announce free delivery for all sales and free pick-up and delivery for all service, repair and calibration work within Ontario Canada.

“Free delivery for all sales of equipment and free pick-up and delivery for all service, repair and calibration work within Ontario Canada is a serious value-add for our clients… we usually get things done within 24 hours and our clients value the timely, complimentary service... it really elevates our overall level of service to the client” states Stephen Hopkins, Director, Mr Test Equipment.

Mr Test Equipment is a Canadian company that specializes in sales of refurbished, calibrated, electronic test and measurement equipment like oscilloscopes, spectrum analyzers, network analyzers, signal generators, logic analyzers, etc. All service, repair and calibration work is done in an NIST traceable metrology laboratory.

For more detailed information, contact Stephen Hopkins, Mr Test Equipment by email at e-mail protected from spam bots or call 905 274 6200 or visit http://www.mrtestequipment.com/

Posted by Industrial-Manufacturing at 12:54 AM | Comments (0)

Installing Your Own Home Security System is Becoming Extremely Popular

Installing a home security system is becoming increasingly popular and easy for most do it yourselfers while saving money. Some home security companies require a three year contract trapping home owners in.

(PRWEB) September 8, 2005 -- Installing your own home security system is becoming more and more popular.

With new technology, it is making it more affordable and easier for people to install their own home security system. One company in particular started selling DIY home security systems after the owners were frustrated at the extremely high costs of the larger national home security companies. Code Tech security started offering systems where the do it yourselfer can have a system up and running for a few hundred dollars without signing a contract for monitoring. Many people believe that if a burglar breaks into the house a simple alarm sound will deter most people from sticking around.

That is exactly what Code Tech security offers, a wireless system that the home owner sets up and then allows the system to call up to nine different telephone numbers versus a monitoring system. The homeowner can allow the system to call a cell phone, neighbor, a family member, friends, etc. with their own personal message.

The best selling product for Code Tech security is the “Complete Wireless alarm system” that comes with a Control Panel, a dialer, motion detector, 2 door or window sensors, and a keychain transmitter. Then customers add on additional accessories as needed. For instance, most people add on more window or door sensors.

Before the owners opened www.codetechsecurity.com they called on a national home security company to give them an analysis of their home. It wasn't $99 as the commercial mentioned. After plugging in all of the window sensors and motion detectors it was well over $1,000 then another 3 year contract that needed signed for $27 per month or a total of $972 over the life of the contract when they only needed to know if a window was opened. Then they believe most people would be frightened off at the sound of an alarm.

For more information, please visit www.codetechsecurity.com

Public Relations Contact
Jim Galvin
330.212.7070 Tel
330.688.3326 Fax

Posted by Industrial-Manufacturing at 12:54 AM | Comments (0)

September 07, 2005

Small 486/586 Computer Rich with SuperVGA, Analog I/O, Digital I/O, and 10/100 Ethernet

Micro/sys releases the small SBC0489 high performance 486/586 computer rich with SuperVGA, analog I/O, digital I/O, and 10/100 Ethernet. With 64MB of RAM, up to 128MB flash, and full AT-compatibility, high performance control systems can be developed as single board solutions.

Montrose, CA (PRWEB) September 7, 2005 -- Based on a high performance 486/586 core, the SBC0489 from Micro/sys provides truly single board solutions in a 5" x 5" footprint.

In addition to all expected PC features, such as SVGA and disk controllers, the new model also includes digital I/O, analog-to-digital converters, digital-to-analog converters, and Ethernet support for both 10BASE-T and 100BASE-T. With 64MB of RAM, up to 128MB flash and full AT-compatibility, high performance control systems can be developed as single board solutions. SBC0489-based systems can run applications in many modes, from completely headless and diskless (no operator interface or disk drives) to full disk based GUI systems. The SBC0489 can boot DOS, LINUX, Windows CE, and other PC compatible operating systems.

The SBC0489 is implemented with the STPC Atlas processor, which offers speeds from 66MHZ to133MHz, on-chip cache, 64-bit DRAM access, hardware floating point, and AT-compatible interrupt, timer, and DMA controllers. The SBC0489 includes COM1, COM2, LPT1, SuperVGA, keyboard, mouse, floppy, IDE, and an 8-by-8 matrix touchscreen or keypad interface. The SuperVGA includes hardware acceleration, and drives CRT monitors and active matrix TFT flat panel displays with resolutions to 1024 x 1024. Application I/O offered on the SBC0489 includes 10/100MHz Ethernet, 24 CMOS I/O lines from an 82C55, eight channels of 12-bit A/D, four channels of 12-bit D/A, and three 16-bit timers from an 82C54. If needed, I/O expansion can be added to the SBC0489 through both PC/104 and PC/104-Plus cards.

The large 128MB flash space available on the SBC0489 can be used as solid state storage for operating systems and large applications. Micro/sys installs a ready-to-run firmware system on the SBC0489 at no cost. This firmware includes a complete industrial BIOS, board setup screens, and application download utilities, and can create a DOS-like execution environment immediately upon powerup. Borland or Microsoft C/C++ 16-bit .EXE files can be downloaded to the board upon receipt. Alternatively, the computer may be configured to boot 32-bit operating systems upon powerup. A free development kit is provided that includes cables, sample software, and full documentation.

The basic SBC0489 starts at $595 in single quantity. Optional features are quite cost effective, as they do not require additional boards. Significant OEM discounts are available. Contact Technical Sales Dept., Micro/sys, Inc., 3730 Park Place, Montrose, CA, 91020, phone (818) 244-4600, FAX (818) 244-4246, URL : www.embeddedsys.com.

Micro/sys has been manufacturing industrial microcomputer products since 1976, including board-level products and integrated computers. Micro/sys embedded computers are specified by OEMs in semiconductor processing, medical, mail handling, pharmaceutical, industrial marking, process control, and many other industries.

Posted by Industrial-Manufacturing at 05:46 AM | Comments (0)

Company Shows How To Keep Costs Down On Laptops and Notebooks

With refurbished laptops and notebooks buying a laptop computer for cheap is still possible. Company will shows how easy and affordable it is. Now supplying laptops to the world.

(PRWEB) September 8, 2005 -- Ever think buying computer equipment is not cheap anymore? Well it's time to change some thoughts. Refurbished laptops and notebook computers are a sure way to save money while getting the same quality as a new laptop computer. OCD is out to prove mobile computing doesn't have to be expensive anymore even with top companies such as IBM ThinkPad, Dell Latitude and Compaq Presario. http://www.onlinecrazydeals.com

Gas prices may never be low again. It's time to accept that fact. Almost everything we use as consumers is shipped by plane, diesel, or ship. All of which use gas. Our plan is to offset those raised costs by offering cheap laptops.

When trying to decide which company to buy a refurbished laptop computer from make sure you know what one is actually getting from them. Many companies offer cheap laptops, but the hardware and technology is so outdated it probably won't run most of today's programs. It's smarter to find someone that offers newer and better refurbished notebooks with faster processors, more memory, better options and they come with current technology instead of yesterdays applications. Why buy a refurbished laptop that won't function with today’s standards? Choose the best.(see document) http://www.onlinecrazydeals.com/default.asp?S=E3&Document=Refurbished+Laptops+Notebooks&NID=2309530

The evolution of the laptop is ever changing. New additions such as wireless internet, faster processors and better hardware keep the mobile computing world at a fast paced race. As many of us find it's easier to carry our computers with us we must also make sure that equipment will function how we need it to when we need it. Refurbished notebook computers will do just that. Cheap laptops and notebooks that have the most advanced features and highest standards is now possible thanks to Online Crazy Deals.(see document) http://www.onlinecrazydeals.com/default.asp?S=E3&Document=Cheap+and+Discount+Laptops&NID=2284329

Buying updated computer equipment shouldn't have to cost an arm and a leg. It's easy to stay mobile while saving money.

Imagine being able to access the internet through Wi Fi wireless internet, or set up a home network and your laptop becomes an uninhibited guide to the rest of the world. Perfect for those on the go, or need to stay mobile. Laptops and notebooks make this possible.

There is nothing like being able to use a notebook computer that is light enough to carry, doesn't have any wires and can still function like a desktop PC.

This company will not let the price of gas reflect the costs of mobile technology. Saving money with our high quality refurbished laptops and notebooks is easy. How do we do it? Superior products, efficient operating costs and it's our job to make sure everyone is happy. http://www.onlinecrazydeals.com

Posted by Industrial-Manufacturing at 05:45 AM | Comments (0)

Human Monitoring has Licensed Moonlight’s Embedded AVC and MPEG-2 Source Codes

The Israeli District Court approved the purchase offer that Human Monitoring Ltd ("HM") submitted for Moonlight’s Video CoDecs source codes for Embedded Media Processors.

(PRWEB) September 7, 2005 -- The Honorable Judge Danya Kareth-Meyer of the District Court of Tel Aviv has approved on Thursday 1.9.05 the purchase offer that Human Monitoring Ltd ("HM") submitted for Moonlight’s Video CoDecs source codes for Embedded Media Processors.

The integration of Moonlight’s proven CoDec technology with HM’s algorithms will allow HM to offer the Philips Media Processors' customers unique solutions of superior quality having a significant technological edge for LCD-TV Sets, DVD Recorders, Surveillance Cameras, and Video Servers.

HM’s Intelligent Algorithms include a Digital Image Stabilizer, and sophisticated VMD (Video Motion Detection), which incorporates Privacy Protecting Technology. These highly efficient algorithms can be integrated with full resolution open standard Video Encoders using a single low-cost Philips Media Processor,

Moonlight Cordless Ltd. is reputed for the quality of its open standard CoDecs, which were licensed to companies like NEC, Cyberlink, and Panasonic. The Company is under Temporary Liquidation since April 2004, the Temporary Liquidator being the attorney Ron Gazit, of Gazit, Rotenberg & Co.

Human Monitoring Ltd. was founded February 2005 by Dr. Nitzan Rabinowitz, the former CTO of Moonlight, and Ira Dvir, the former CEO and co-founder of Moonlight. Human Monitoring is developing sophisticated video algorithms which include Digital Image Stabilizers and Privacy Protection Motion Detectors.

Posted by Industrial-Manufacturing at 05:44 AM | Comments (0)

September 06, 2005

Printable Electronics Market To Surpass $7 Billion In Revenue in 2010

According to a new report from NanoMarkets, an industry analyst firm based here, the market for printable electronics will generate estimated revenues of over $7 billion ($ US) in 2010 driven by demand for printable displays, RFID, photovoltaics, computer memory and other printable products. Information about the report, “Printable Electronics: Roadmaps, Markets and Opportunities” and a white paper can be accessed from the firm’s Website at www.nanomarkets.net.

Glen Allen, VA (PRWEB) September 6, 2005 -- According to a new report from NanoMarkets, an industry analyst firm based here, the market for printable electronics will generate estimated revenues of over $7 billion ($ US) in 2010 driven by demand for printable displays, RFID, photovoltaics, computer memory and other printable products. Information about the report, “Printable Electronics: Roadmaps, Markets and Opportunities” and a white paper can be accessed from the firm’s Website at www.nanomarkets.net.

NanoMarkets’ new report claims that the areas with the largest growth opportunities include printable displays which NanoMarkets projects to be a market worth over $3 billion ($US) in 2010, printable RFID which will be worth $2.2 billion, and computer memory and photovoltaics which will achieve more modest yet significant markets opportunities of almost $ 770 million and $580 million respectably. According to Lawrence D. Gasman, NanoMarkets’ Principal Analyst, “Once one printable electronics product proves itself in the marketplace, it will lend considerable credibility to the entire sector.”

The term “printable electronics” refers to circuitry created out of conductive polymer and nano-metallic inks using a wide variety of printing technologies, old and new. NanoMarkets’ report says that printable electronics offers compelling advantages over more conventional ways of producing electronic circuits. These include the ability to cost effectively mass produce products that could never be created using the old CMOS paradigm such as RFID tags that are inexpensive enough to replace bar codes, roll up displays or smart packaging that will allow companies to enhance their offerings and product lines. The report notes that ink-jet printing offers the potential to create specialized circuits in very small runs which will address the semiconductor industry's urgent need to reduce prototyping costs. Lastly, printable electronics will also enable companies to create new forms of consumer products embedded with intelligence or other features that will enhance revenue possibilities. All of this can be done with relatively modest upfront investments.

About the Report:
NanoMarkets' new report provides a detailed analysis of market opportunities available to a wide range of companies who stand to benefit from developments in printable electronics. Such firms range from materials firms such as 3M, Cabot and DuPont that are actively pursuing this sector, through printing equipment firms such as Litrex and Dimatix, to manufacturers of actual printable products such as Cambridge Display Technology, Philips, Plastic Logic and Samsung. The report is based on in-depth interviews of firms throughout the entire value chain including materials, manufacturing, equipment, packaging and finished products companies.

The report includes an analysis of all the key sectors where printable electronics can be deployed and provides (1) insight into how printable electronics technology is likely to evolve over the coming decade, (2) forecasts through 2012 of all the applications markets where "printables" will generate significant revenues, including breakouts by end user type and specific products, (3) a guide to which companies are active in this space now and what they are doing and (4) a complete roadmap for the printable electronics market. The report will be essential reading for marketing and planning executives in the electronics, semiconductor and printing industry as well as to VCs and others that are investing in the printable electronics space.

Please visit www.nanomarkets.net for additional information or contact Robert Nolan at (804) 360-2967. Members of the press may receive an executive summary upon request.

About NanoMarkets:
Through our reports, white papers and customized client engagements NanoMarkets analyzes opportunities in both established and emerging markets brought about through developments in advanced technology and materials science.

Posted by Industrial-Manufacturing at 01:38 AM | Comments (0)

Design Chain Associates, LLC To Present in Mentor Graphics Webcast

Design Chain Associates, LLC is pleased to announce that Ken Stanvick, Senior Vice President, will be the featured speaker in a Mentor Graphics webcast on September 14th. The webcast, entitled “The Impact of RoHS on the Design Process”, focuses on how the European Union’s (EU) “restriction of the use of certain hazardous substances in electrical and electronic equipment”, or RoHS, directive (2002/95/EC) and similar legislation and regulations around the world impacts electronic design engineering.

San Francisco, CA (PRWEB) September 6, 2005 -– Design Chain Associates, LLC is pleased to announce that Ken Stanvick, Senior Vice President, will be the featured speaker in a Mentor Graphics webcast on September 14th. The webcast, entitled “The Impact of RoHS on the Design Process”, focuses on how the European Union’s (EU) “restriction of the use of certain hazardous substances in electrical and electronic equipment,” or RoHS, directive (2002/95/EC) and similar legislation and regulations around the world impacts electronic design engineering.

Mentor Graphics is the premier provider of board-level electronic design tools to the electronics industry and provides a design for RoHS compliance capability for their products. John Isaac, Mentor Graphics’ Director of Systems Market Development, identified Ken as a “renowned expert on RoHS” and stated that “Mentor Graphics is pleased to partner with Ken and Design Chain Associates to provide this design-focused webcast. The industry needs more RoHS information specifically targeted at the engineers and designers performing the PCB design.”

Ken commented that “DCA and I welcome this opportunity to reach out to Mentor Graphics’ customer base and help them become aware of and prepare for the technical as well as legal impact these new regulations will have on their day-to-day work”.

Topics covered will include why the regulation impacts design engineering and specifically what the impact is to:

· printed circuit board materials and layout
· component selection and related manufacturability and reliability issues
· what data is required to be collected, why, and what to do with it
· circuit design

as well as a brief introduction to “Design for Environment”.

Visit http://www.mentor.com/products/pcb/events/rohs_webinar.cfm to sign up to attend the webcast, which is free.

About Design Chain Associates, LLC
Design Chain Associates' consulting services help Electronics OEMs speed product time-to-market, reduce supply chain risks, and lower costs while increasing engineering and procurement efficiency. DCA offers a variety of consulting services related to RoHS and environmental compliance, including public and private seminars, product impact evaluation, personalized training, material composition acquisition, component engineering, Green BOM analysis, and competitive advantage analysis. San Francisco-based DCA has a local presence in other high-tech regions of the country such as the Austin/Houston corridor and the Boston region as well as around the globe through local associates. For more information, visit DCA on the web at http://www.designchainassociates.com.

Posted by Industrial-Manufacturing at 01:36 AM | Comments (0)

SchmartBOARD To Give 3 Percent of Online Sales to AmeriCares and their Hurricane Relief Fund.

Three percent of online sales from now through 2005 will go to AmeriCares efforts to bring assistance to those most in need in the aftermath of Katrina.

Fremont, CA (PRWEB) September 6, 2005 -- SchmartBOARD, a company that develops electronic prototyping boards, has announced that three percent of all online sales will go towards the survivors of Hurricane Katrina from September 1st through the end 2005.

SchmartBoard gave three percent of online sales to the Asian tsunami victims in the first quarter of 2005 through AmeriCares. "Our hearts go out to our fellow Americans who have been affected by this disaster" said SchmartBoard's VP Sales & Marketing, Neal Greenberg. "We all want to help in our own small way. I feel very good about helping with the support of our customers through AmeriCares".

About SchmartBOARD (www.schmartboard.com)
SchmartBOARDTM is committed to helping engineers, students, and hobbyists develop electronic circuits faster, easier, and less expensively than previously possible. Schmartboard's patent pending Electronic Circuit Building Blocks makes this possible.

About AmeriCares (www.americares.org)
AmeriCares is a nonprofit humanitarian aid and disaster relief organization that supports long-term medical assistance programs and provides emergency relief in the U.S. and around the world. In the U.S., AmeriCares provides basic medical services for the uninsured, refurbishes the homes of the physically and financially disadvantaged and gives a summer camping experience to inner-city children affected by HIV/AIDS. Since it was established in 1982, AmeriCares has distributed more than $5 billion in humanitarian aid to 137 countries. For more information, visit AmeriCares web site at www.americares.org or call 1-800-486-HELP.

Posted by Industrial-Manufacturing at 01:35 AM | Comments (0)

Jennic announces availability of world’s first single-chip IEEE 802.15.4 wireless microcontroller

Sheffield, UK (PRWEB) September 5, 2005 -- Jennic has announced that its JN5121 single chip IEEE 802.15.4 wireless microcontroller is now available and in production in volume quantities.

Designed for power-efficient control within wireless sensor networks based on the IEEE 802.15.4 and ZigBee standards, the chip is now available worldwide through the company’s sales offices directly and through its distribution network.

The JN5121 is unique since it combines a 32-bit RISC core, fully compliant 2.4GHz IEEE802.15.4 transceiver and integrated 64KB ROM and 96KB RAM memory blocks, all in a single 8x8mm 56 lead QFN chip package. Manufactured on IBM’s 7RF low cost RF CMOS process which is designed for radio frequency (RF) and low power wireless applications, the wireless microcontroller from Jennic provides a versatile general purpose solution for a diverse range of low power sensor network applications ranging from simple point-to-point to complex mesh requirements in home, building and industrial control and automation systems.

Unlike other proposed solutions, the JN5121 features a high-level of integration to help reduce overall system cost, and allowing very small low power modules to be constructed. For example, the RAM allows support of router and coordinator functions without the need for an additional external SRAM. Other features include an integrated hardware MAC for highly secure AES encrypted data flow, integrated sleep oscillator and power saving facilities for low system power consumption, and a wide range of industry standard peripherals and interfaces.

This integrated functionality ensures that a minimum of external components are required to implement the majority of sensor and control applications, enabling modules to be designed without recourse to advanced PCB technologies. The JN5121 only requires an additional crystal oscillator, flash memory, decoupling components and printed antenna for a low bill of materials cost. A reference module is available from Jennic with designs that can be readily customized to suit the application with alternative antennas, IO and so on. The module is just 18x25mm in size, and includes an integrated antenna, 21 multi-purpose digital IO, an SPI port and four analog connections.

The device is controlled via the SPI or UART interfaces, whereas debug is achieved via a second UART port. Jennic also provides IEEE802.15.4 protocol software, coordinator and endpoint device evaluation boards and software development tools.

Editor's note:
About Jennic
Jennic is a fabless semiconductor company leading the wireless connectivity revolution into new applications. Its expertise in systems and software combined with world class RF and digital chip design provides low cost, highly integrated silicon solutions for the low power short range wireless data market with a focus on the IEEE802.15.4 and ZigBee standards. The company’s products include state-of-the-art low power wireless microcontrollers, transceivers and low cost development platforms. Headquartered in Sheffield, UK, and employing over 60 people, Jennic is privately held and has a track record of successful silicon chip development for wireless applications over the last nine years. For more information visit www.jennic.com.

Contact:
Fiona Davis, Jennic
Tel: +44 (0) 114 281 2655

Posted by Industrial-Manufacturing at 01:34 AM | Comments (0)

September 05, 2005

NanoPulse ESD/EMI Sensor Is Separating ESD from All the Rest

Novx Corporation introduces the next generation in process monitoring and control solutions.

San Jose, Calif. (PRWEB) September 5, 2005 -- Novx Corporation, the leading supplier of ESC/ESD-related monitoring instruments, cleanroom and ESD protective work area monitoring and control solutions, is introducing the next generation process monitoring and control instrument the NanoPulse Series 7000.

The NanoPulse sensor has been developed for ESD/EMI applications requiring a constant dedicated monitoring strategy in highly constrained processing environments. The combination of smart signal processing to identify ESD events from most background noise with the freedom to adapt antenna types and configurations for specific applications makes it a valuable addition to process monitoring. The NanoPulse uses dynamic threshold analysis to determine ambient noise level and form the first part of ESD pulse event discrimination. It also addresses a spectral range of 1MHz to 8GHz, which accommodates ESD event bandwidth as well as most commonly encountered electromagnetic noise frequencies.

The NanoPulse also tracks electromagnetic noise levels separately from ESD event detection and analysis, allowing separate alarm reporting. Alarm reporting levels for both ESD events and EM levels are user programmable. The instrument facilitates direct reporting of monitored parameters from a significant number of tools and may be simultaneously interfaced to the process tool and monitoring system (PEMS) for data storage and report generation. The Series 7000 monitor and its associated workstation and/or process equipment, has the capability to directly perform SPC calculations and direct tool communication in addition to previously available reporting functions.

Another feature of the NanoPulse is antenna independence. Both active and passive antennas in a variety of configurations can be implemented to further tune ESD event detection. In some cases, specialized antennas can be implemented which are direct analogs for very sensitive product and which can correctly represent true product vulnerabilities to radiated energy. In applications with accessibility and space restraints, small form-factor antennas can be installed directly at the monitoring point with sensor processing taking place in the Series 7000 at a more accessible location.

This instrument is capable of communicating with industry standard particle counters and particle detectors in addition to its own ESC/ESD-related monitoring capabilities with the ability to report data using RS-485, ModBus, Ethernet, Wireless Ethernet (802.11a/b/g) protocols. Additional capabilities include detection of field charge (ionization balance monitoring) with automatic or manual decay testing, EMI magnitude and pulse counting, dual-channel ground monitoring and operator voltage or body current detection (patent pending) all with programmable alarm thresholds via a PC interface. Novx has developed this instrument with customer programmable sensitivity and alarm threshold sensing to meet and exceed customer requirements for an extended period of time. The instrument is designed with a modular construction allowing the user to add optional plug-in process enhancements as required. The plug-in modules include digital I/O communication adding direct interface to PEMS, particle count reporting, field sensing with decay testing, EMI detection, operator body voltage or current and ground monitoring. The combination of hardware and software allows the user to monitor, analyze and control processes 24/7 365 days a year.

The introduction of the Series 7000 represents a direct response to strategic customer communication that defines their process requirements for ESC/ESD-related monitoring for today and tomorrow's processes. The digital I/O communication plug-in module provides a proactive function when interfaced to PEMS to receive and report warning or alarm conditions to control the process. This platform will directly reduce process variations, decrease scrap/rework and improve process yields at the specific workstation level. The result will be process yield improvement, an increase in tool availability resulting in an increase in factory capacity. Utilizing the Series 7000 will result in a more accurate way of evaluating operator and tool performance and complements the Novx complete line of ESC/ESD-related instruments and environmental sensors. A single sensor may also be connected to the instrument when interfaced to the PEMS Software, ideal for workstation characterization. In addition, a real-time alphanumeric display (Remote Display) for engineering analysis and continuous monitoring can also be connected to the Series 7000. The Remote Display includes body voltage levels, ground resistance values, field charge (ionization balance) levels, EMI count and peak voltage.

Features

- Tracks EM Noise Levels
- Dynamic Threshold Analysis
- Independent EMI/ESD Event Detection
- User Programmable Alarm Levels
- Field Charge/Ionization Balance Monitoring
- Ionizer and Closed-loop Feedback
- Body Voltage or Current Detection
- Remote Monitoring and Proactive Control
- Dual-channel Ground Monitoring
- Decay Testing
- EMI Detection and Reporting
- SPC for Direct Tool Interface and Control
- Wireless Ethernet (802.11a/b/g)
- Critical Alert Notifications
- Digital I/O Communication

The Series 7000 is the next generation product for enhanced process control capability, while significantly reducing the cost of purchase, cost of ownership and cost of upgrading to meet tomorrow's requirements. www.novxcorp.com/series_7000.htm

About Novx Corporation

Novx founded in 1989, is a leading provider of workstation/process equipment monitors and process environment management solutions. The company provides products and services to the semiconductor, storage device, flat panel display, electronics manufacturing services, medical and many other industries.

Novx customers use its products and services to monitor electrostatic charge, and the process environment, thereby; improving manufacturing yields, finished product quality, and manufacturing equipment performance. The shrinking geometries of today’s electronic devices place greater importance on knowing what is happening within your processes. Novx hardware and software solutions make this possible, reliable and affordable. Novx assists customers in achieving higher productivity levels by mitigating the adverse effects of Electrostatic Discharge (ESD), Electromagnetic Interference (EMI) and Electrostatic Attraction (ESA) from the manufacturing environment. The introduction of the Series 7000, communicating directly with PEMS, Novx can now supply the complete environmental monitoring solution, thereby reducing scrap and improving product quality in any manufacturing environment. On the web at http://www.novxcorp.com

Novx Corporation is headquartered at 830 Jury Court, San Jose, CA 95112, (408) 998-5555 ph, (408) 998-1414 fax, 1-800-728-Novx

Editorial Contacts

Steve Heymann, CEO, Novx Corporation, (408) 998-5555 x303, e-mail protected from spam bots

Lem Hollins, Vice President of Marketing and Sales, Novx Corporation, (408) 998-5555 x306, e-mail protected from spam bots

Posted by Industrial-Manufacturing at 01:42 AM | Comments (0)

iPod Garage Donates 15 Percent of August Revenues to the Red Cross for Hurricane Relief

(PRWEB) September 5, 2005 -- iPod Garage, one of the world's leading iPod websites, announced that it has donated fifteen percent of its August 2005 revenues to the Red Cross for the purpose of assisting with hurricane relief in New Orleans and the surrounding areas.

"We're announcing this publicly in the hopes that iPod users everywhere will follow our example," said Bill Palmer, iPod Garage Publisher and Founder. "If you can afford to buy an iPod, then you can afford to make a donation to help our fellow citizens who have lost their homes and whose lives in many cases are hanging in the balance. Even if you're not in a position to make a sizable donation, you can certainly donate $5 or $10."

iPod Garage encourages iPod users (and non-users) everywhere to donate to the Red Cross or any other reputable charity currently involved in hurricane relief. Red Cross banners, displayed prominently throughout http://www.iPodGarage.com, link directly to a donation page in the iTunes Music Store which allows users with existing iTunes accounts to make a one-click Red Cross donation.

Posted by Industrial-Manufacturing at 01:41 AM | Comments (0)

With Transportation Costs on the Rise the FTC Is Embracing Electronic Delivery

FTC announces PrivaSign™ complies with industry regulations.

Dallas, TX (PRWEB via PR Web Direct) September 3, 2005 -- VaultraNet announced today that it has received a letter from the Federal Trade Commission stating that VaultraNet’s electronic signature capturing service, "PrivaSign™," fully complies with industry regulations. This letter lays the foundation for businesses to start using electronic file delivery and electronic signature capturing to immediately save time and money over traditional shipping options.

PrivaSign™ is currently used by a wide variety of businesses to securely deliver and electronically sign files, and the PrivaSign™ technology is neither industry nor purpose specific, so it may be used by any business to lower delivery costs and shorten delivery times. Currently VaultraNet is focusing its efforts and product development on growing its franchise industry presence. PrivaSign™ is widely used in the franchise industry to electronically distribute information to prospective and existing franchisees including Uniform Franchise Offering Circulars (UFOC), as well as marketing materials and other information franchisers have traditionally sent by snail-mail or other shipping channels.

The Federal Trade Commission said in its letter to VaultraNet, "Based upon our review, we are satisfied that VaultraNet has made a good faith effort to comply with the proposed Internet instructions specified (in the Federal Register)." The FTC has dedicated a great deal of time and energy into regulating electronic signature capture and electronic delivery of legally binding documents, in particular how those technologies affect the franchise industry. These efforts have never been more useful than they are today. With gas prices reaching record highs and transportation costs escalating on a seemingly daily basis, the use of electronic file delivery and signature capturing will save businesses and consumers money immediately.

VaultraNet President Jason McKay said of the letter, "VaultraNet has always strived to provide our customers with the most efficient technology available while at all times complying with industry regulations. We have always been compliant with the E-SIGN Act (Electronic Signatures in Global and National Commerce Act) and we are honored that the FTC has taken time to acknowledge our efforts. Electronic file delivery and electronic signature capturing is the wave of the future and businesses who adopt this technology now will be more organized and efficient. Additionally they will shelter their business against rising fuel, printing and handling costs."

The E-SIGN Act was written to help the business community and the consumer become more efficient by utilizing electronic technologies, but electronic file delivery and electronic signature capturing offer more than just time and money savings, they enable the consumer and businesses that use the technology to be more organized. The technology is better for the environment, and it makes corporate compliance significantly easier by streamlining and tracking chains of communication.

Electronic signatures are just one aspect of the document lifecycle that VaultraNet’s PrivaSign™ service helps to manage. Other services available through PrivaSign™ are electronic storage and archiving of files, multi-file and multi-signatory capturing, viewer licensing for audit and tracking signature files, secure e-mail and an integrated calendar system that tracks all relevant dates or action events associated with a file. PrivaSign™ is setting a new industry standard for electronic file delivery and electronic signature capturing, and it is available in an ASP Edition as well as an Enterprise Edition for large customers.

About VaultraNet
The two founding partners who created VaultraNet in 2001 are still the driving force behind VaultraNet’s ambition and success. After paying its dues in the startup arena, VaultraNet has found itself being used in over 20 different industries including Franchising, Legal, Construction, Finance, Health Care, Hotel and Hospitality, Consumer Services, Banking and many more. The PrivaSign™ product is sold and distributed primarily through OEM and Marketing Partnership programs. The company has patents pending on its proprietary electronic signature capture service, and it is currently developing the first 100 percent web-based electronic signature system for international and domestic file transfer and signature capturing.

Contact:
Isaac Bowman
469.878.6015
866.447.2203
www.vaultranet.com

Posted by Industrial-Manufacturing at 01:38 AM | Comments (0)

SchmartBoard, Inc. To Give 3% of Online Sales to Hurricane Katrina.

3% of online sales from now through 2005 to be given to AmeriCares Foundation

Fremont, CA (PRWEB) September 4, 2005 -- SchmartBOARD, a company that develops electronic prototyping boards, has announced that 3% of all online sales will go towards the victims of Hurricane Katrina from September 1st through the end of 2005

SchmartBoard gave 3% of online sales to the Asian tsunami victims in the first quarter of 2005 through AmeriCares Foundation. “Our hearts go out to our fellow Americans who have been affected by this disaster” said SchmartBoard’s VP Sales & Marketing, Neal Greenberg. “We all want to help in our own small way. I feel very good about helping with the support of our customers through AmeriCares foundation”.

About SchmartBoard, Inc. (www.schmartboard.com)
SchmartBoardM is committed to helping engineers, students, and hobbyists develop electronic circuits faster, easier, and less expensively than previously possible. At Schmartboard, our three-word mission statement is “Electronics for Everyone”. More information is available at http://www.schmartboard.com

About AmeriCares (www.americares.org)
AmeriCares is a nonprofit humanitarian aid and disaster relief organization that supports long-term medical assistance programs and provides emergency relief in the U.S. and around the world. In the U.S., AmeriCares provides basic medical services for the uninsured, refurbishes the homes of the physically and financially disadvantaged and gives a summer camping experience to inner-city children affected by HIV/AIDS. Since it was established in 1982, AmeriCares has distributed more than $4 billion in humanitarian aid to 137 countries. For more information, visit AmeriCares web site at www.americares.org or call 1-800-486-HELP.

Posted by Industrial-Manufacturing at 01:38 AM | Comments (0)

September 02, 2005

New Consumer Electronics Website Reaches Over One Quarter Million Customers in First Year

With over 10,000 consumer electronics products and accessories in their inventory, AVToyBox made its online debut in June of 2004 with only six customers on the very first day. Since then, AVToyBox has grown to host over 2500 unique customers daily from all around the world and totalling over 330,000 unique customers in the first 12 months. The trend continues to rise.

(PRWEB) September 2, 2005 -- The concept for AVToyBox.com began in 1999 by a 26 year old audio and video hobbyist from Phoenix, Arizona who had a personal obsession with mobile electronics installations.

Since the age of 17, Adam Edmondson has been installing and fine tuning car audio equipment and learning along the way how expensive his hobby had become. He realized that sometimes the most cost effective means of purchasing high end equipment at below dealer pricing was to shop online, however the wait for shipment would sometimes take weeks before receiving any product. This meant potential lost business. There had to be a more efficient way to provide customers with competitive pricing yet still be able to ship within a more reasonable amount of time or overnight if needed. AVToyBox.com was born.

Shellie Adams, owner of AVToyBox.com, had this to share - "With Adam's electronics know-how, web design background and marketing experience, he became an immediate asset. We would never have grown to the success point that we are at so quickly without his direct involvement at AVToyBox."

As soon as AVToyBox.com opened to the public in June of 2004, competitive pricing with on-time delivery was immediately available. Customers could now place an order by 5 p.m. EST and receive delivery as early as 8 AM the next morning. Mobile electronics are not the only merchandise available – customers can now order a full selection of home, vehicle and portable electronics including plasma television, installation accessories, XM radio, car stereo products and much more. AVToyBox.com is also an authorized online dealer of many manufacturers including Monster Cable, Garmin GPS, Konica Minolta, Delphi, Casio, Sennheiser and more. Daily pricing updates and ongoing product additions continue today. AVToyBox.com has made plans to expand to over 50,000 consumer electronics products and accessories by the end of 2006.

Posted by Industrial-Manufacturing at 04:23 AM | Comments (0)

Demand For A Sirius Wearable Radio Rocks SkyBox USA

SkyBox USA, a leading online retailer of satellite products and services, announced a dramatic surge in consumer demand for a wearable Sirius Satellite Radio following Sirius(SIRI) announcing the addition of the Sirius S50 to its upcoming fourth quarter lineup.

Boynton Beach, FL (PRWEB) September 2, 2005 -- SkyBox USA, a leading online retailer of satellite products and services, announced a dramatic surge in consumer demand for a wearable Sirius Satellite Radio following the announcement by Sirius (SIRI) of the addition of the Sirius S50 to its upcoming 4th Quarter product Line-Up. SkyBox USA responded swiftly by changing business rules, processes and its web interface within 24 hours of Sirius' announcement to allow consumers to reserve an S50 radio.

The first of its kind, available from Sirius, the S50 is portable, wearable and has MP3/WMA capability. The unit will be able to hold up to 50 hours of satellite and MP3/WMA programming. The S50 comes bundled with a car kit and the home dock is sold separately. This product gives Sirius an entry into the wearable marketplace previously captured only by XM Radio with its successful wearable products, also available from SkyBox USA.

Jason Myers, Co-Founder of SkyBox-USA.com was quoted as saying, "Our team stepped up to the challenge by enabling our customers to reserve the Sirius S50 thereby allowing us to provide important product forecasting to our distribution partner Sirius Satellite." He went on to say, "the S50 is a welcome addition to the SkyBox USA catalog of products."

About SkyBox USA:
Founded in August of 2004, SkyBox USA, the d/b/a for Gold Chip Investments, LLC, specializes in Satellite TV, High Speed Satellite Internet and Satellite Radio products offered through its website at http://www.skybox-usa.com and is an independent Authorized Retailer of Dish Network, Direcway, XM Radio and Sirius Satellite Radio. SkyBox USA is a privately held company located in Boynton Beach Florida. Dish Network (Dish), Direcway (HNS), XM Radio (XMSR), and Sirius (SIRI) are publicly held companies.

Posted by Industrial-Manufacturing at 04:22 AM | Comments (0)

AmericanCell Announces Launch of its new web site AmericanCell.com

AmericanCell launches its new website www.AmericanCell.com, brainchild of American entrepreneurs living in Israel. The website offers some of the best cellular phone deals on or off the net.

(PRWEB) September 2, 2005 -- AmericanCell announces the launch of its newest site AmericanCell.com. The company invites individuals, businesses, and non-profit organizations to browse its selection of leading wireless devices and take advantage of its amazingly low prices and service plans.

Founded by a US-born entrepreneur, AmericanCell is a unique example of a US company's operations being fully managed overseas, in this case by American citizens in Israel, rather than by foreign workers in India or China. AmericanCell follows the lead of New Jersey based Telco IDT, who in 2002 established a world-class call center in Jerusalem employing US-born call center agents. Like IDT Global, AmericanCell utilizes the highly educated and skilled American workforce in Israel to manage its day-to-day operations. The result is a highly motivated American staff that is in tune with the American consumer.

Like other cellular phone websites, AmericanCell offers Free FedEx shipping, a large selection of popular cell phones blackberries, and PDAs, at the lowest prices available. AmericanCell also offers a 14-day money back guarantee, "hacker safe" secure online ordering as well as unprecedented access to newest and most popular cellular phones available.

AmericanCell launches its new site just in time for the back-to-school season rush. Specials are available where consumers can save hundreds of dollars by ordering featured models such as the Motorola Razr V3, Treo 650, T-Mobile Sidekick 2, as well as the complete line of Blackberry phone PDAs. Prices are typically 60% lower than retail dealers.

AmericanCell's VP of Strategy, Brice Richards says, "AmericanCell.com makes the purchase of a cell phone and service plan smooth, hassle-free and fun because of its unique customer service which operates in real-time."

With US Offices in New York and its operations center in Israel, AmericanCell will soon officially launch its new affiliate program providing affiliates partners with creative ways to monetize their website and newsletter traffic.

About AmericanCell:
The mission of AmericanCell is to create an excellent online experience for consumers and businesses shopping for cellular phones. AmericanCell seeks to increase the percentage of Americans who purchase their cellular phones online from an estimated 7% to more than twice that number over the next 12 months.

Posted by Industrial-Manufacturing at 04:22 AM | Comments (0)

MobileDataforce® Announces PointSync® 2.0 for Win CE.NET, Enabling Rapid Creation and Deployment of Mobile Applications on Industrial Strength Handhelds

Win CE.NET version expands PointSync's reach into industrial grade handheld computer market.

Meridian, Idaho (PRWEB via MobilityNewswire) September 1, 2005 -- MobileDataforce®, the leading provider of rapid application development solutions for mobile environments (RADS-ME), announced today the launch of PointSync® 2.0 for Win CE.NET, a complete system for building and deploying advanced mobile applications on industrial grade mobile devices. With PointSync, organizations with or without in-house programmers can quickly and easily create customized mobile applications for field data collection, bar code reading, RFID and much more.

"The new support of Win CE.Net handhelds by MobileDataforce on their PointSync platform will be well received by our enterprise mobility customers," says Brent Felker, Americas vice president, Mobile Solutions, Psion Teklogix. "Win CE.Net is rapidly becoming the preferred handheld operating system in the enterprise sector, based on its tighter security features, smaller footprint, and reduced power needs. The full mobile application development and operations capabilities of the PointSync platform will help us serve the rapidly expanding market for mobile workforce applications in a wide variety of vertical market segments."

PointSync 2.0 now enables IT departments and systems integrators to rapidly develop mobile database applications that run on both Pocket PC and Win CE.NET devices. PointSync provides enterprises, government agencies and integrators the ability to rapidly develop and deploy mobility projects of all kinds. It is designed for use in a range of industries, such as environmental engineering, utilities, facilities management, field service, logistics, heavy construction and inventory control.

PointSync makes it faster and more affordable to go from concept to deployment with no programming experience required. While advanced application logic capabilities are available, PointSync enables anyone—regardless of technical knowledge—to rapidly build high-performance mobile applications with full two-way database synchronization from the mobile handheld computer to the enterprise.

"PointSync 2.0 for Win CE.NET expands MobileDataforce's leadership in the enterprise mobile software market by adding support for industrial grade handheld computers of all sizes and shapes that utilize Win CE.NET," says Kevin Benedict, CEO of MobileDataforce. "The ability to build one mobile application and have it work on many different hardware devices and platforms is an extremely compelling feature for IT departments and systems integrators."

About MobileDataforce
MobileDataforce is a global leader in the development of high performance software solutions for use on mobile handheld computers. Privately held, MobileDataforce was founded in 2000 and its software solutions are sold worldwide through direct and Value Added Reseller (VAR) channels. MobileDataforce's software solutions are primarily targeted for the "hardhat" industries including engineering, utilities, facilities management, heavy construction, and inspection services. For more information, please visit our website at www.mobiledataforce.com.

Media Contact:
Kevin Doel
TalonPR, Inc.
Office 785-273-9660

Posted by Industrial-Manufacturing at 04:20 AM | Comments (0)

Belden Homechoice® TruAudio™ Speaker Cables Offer Homeowners Enhanced Sound Performance

Belden CDT Electronics Division introduces its new HomeChoice® TruAudio™ Speaker cables for indoor/outdoor/burial residential applications.

Richmond, IN (PRWEB via PR Web Direct) September 1, 2005 -- Belden CDT Electronics Division, a world leader in the development of specialty cable products for the commercial, industrial, broadcast and residential markets, introduces its new HomeChoice® TruAudio™ Speaker cables for indoor/outdoor/burial residential applications. The new TruAudio cables answer the residential market's need for a high-end, indoor/outdoor rated speaker cable offering enhanced sound performance, as well as installation benefits.

To deliver clear, precise sound quality, Belden HomeChoice TruAudio Speaker cables are manufactured using oxygen-free, high conductivity copper conductors and a polyolefin dielectric, which is distinctly better than traditional PVC insulation because of its low capacitance. As a result, TruAudio Speaker cables are able to transmit a consistently pure sound with superior high frequency response, even at extended distances. For homeowners, this ensures delivery of quality audio, both indoors and at outdoor locations, such as patios, decks, gardens and poolside.

Installers of the speaker cable will benefit from the cables' brightly colored satin PVC jackets and easy-to-read identification of room and zone, as well as ascending and descending sequential footage markings. In addition, the TruAudio cables are extremely flexible and easy to pull, making installation fast and efficient.

HomeChoice TruAudio Speaker cables are available with 16, 14 or 12 AWG bare copper conductors, highly stranded for optimal flexibility. The line includes five speaker cables, all of which are CMR, CL3R, CMG, FT4 rated for in-wall or outdoor use. These include:
* HC 2757 - 16 AWG (65 strands), 2-conductor cable with a Purple or White PVC jacket
* HC 2758 - 16 AWG (65 strands), 4-conductor cable with a Violet or White PVC jacket
* HC 2759 - 14 AWG (105 strands), 2-conductor cable with a Yellow or White PVC jacket
* HC 2760 - 14 AWG (105 strands), 4-conductor cable with an Orange or White PVC jacket
* HC 2761 - 12 AWG (168 strands), 2-conductor cable with a Pink or White PVC jacket

Belden CDT Electronics Division offers a comprehensive line of HomeChoice cables— including single application cables for voice, audio/video, data and multimedia, and over 20 different composite cable constructions that combine fiber optic, UTP, coaxial, paired and multi-conductor cables.

For more information about our complete line of HomeChoice cables, contact Belden CDT Electronics Division, P.O. Box 1980, Richmond, Indiana 47375, or call 1-800-BELDEN-4 to request a copy of New Product Bulletin NP210. FAX: 765-983-5294. Or visit the Web site: www.belden.com.

About Belden CDT Electronics Division
Belden CDT Electronics Division, a unit of Belden CDT Inc., is a leader in the design, manufacture, and marketing of cable products for the entertainment, residential, industrial and security markets. It also provides highly engineered products for both the aerospace and automotive markets. Belden CDT Electronics Division is headquartered in Richmond, Indiana; it has manufacturing facilities in North America and Europe and distribution centers in the U.S., Canada, Singapore, Australia and the Netherlands. A majority of Belden's manufacturing, engineering and support functions are registered to the International Organization for Standardization.

Belden CDT Inc., formed in July 2004 through the merger of Belden Inc. and Cable Design Technologies Corp., is one of the largest U.S.-based manufacturers of high-speed electronic cables and focuses on products for the specialty electronics and data networking markets, including connectivity.

Belden CDT Electronics Division
Frank Stone
1-800-BELDEN-4

Agency Contact:
Janet Killen
Adventive Marketing, Inc.
847-590-1110

Posted by Industrial-Manufacturing at 04:18 AM | Comments (0)

Allied Electronics and Abracon Corporation Sign Distribution Agreement

Allied inks a partnership agreement with Abracon Corporation to distribute crystals, resonators and oscillators.

Fort Worth, TX (PRWEB) September 2, 2005 -- Allied Electronics, a subsidiary of Electrocomponents plc (LSE: ECM), has signed a distribution partnership agreement with Abracon Corporation.

“Allied is excited to offer our customers the Abracon Corporation product line, which will greatly expand our current offering of crystals, resonators and oscillators.” said Lee Davidson, president of Allied Electronics. “Customers buying Abracon products from Allied will get a wide range of devices in stock and in the quantities they need.”

“Abracon Corporation is very pleased to announce our partnership with Allied Electronics,” said Christopher Polley, President of Abracon Corporation. “Allied Electronics has been in business for over 75 years and I am confident that Allied’s customers will greatly appreciate the increased product offering of Abracon Frequency Control and Silicon Timing IC’s that will be offered in stock ready for immediate shipment.”

Allied Electronics stocks more than 135,000 electronic components and electromechanical products from over 300 world-class manufacturers. For more information on Allied Electronics, visit www.alliedelec.com.

About Allied Electronics
Allied Electronics’ headquarters are located in Fort Worth, Texas with 57 sales branches across the United States and Canada. Allied is a subsidiary of Electrocomponents plc (LSE: ECM), the world leading catalog component distributor. Electrocomponents has operations in six continents and headquarters in Oxford, England.

About Abracon Corporation
Abracon Corporation, founded in 1992, is a privately held California corporation and a worldwide leading supplier of electronic components. Abracon offers a wide selection of crystal oscillators, quartz crystals, ceramic resonators, Silicon oscillators, SAW filters and resonators, inductors, and transformers. The company is ISO9001/2000 and QS9000 certified with design engineering and sales offices in California, China, Taiwan, Singapore, and Germany. The companies’ headquarters are located in Rancho Santa Margarita, CA. www.abracon.com

CONTACT:
Roxanne Martinez, Allied Electronics
817-595-8566

Posted by Industrial-Manufacturing at 04:18 AM | Comments (0)

September 01, 2005

Belden's Shielded Twisted Pair Cables Deliver Superior Performance In Wi-Fi Tower Transmissions

Belden CDT Electronics Division recently introduced an outdoor-rated, 4-pair shielded twisted pair (ScTP) cable that meets and exceeds all industry standards for Wi-Fi tower transmissions.

Richmond, IN (PRWEB via PR Web Direct) September 1, 2005 -- Belden CDT Electronics Division, a world leader in the development of specialty cable products for the broadcast, commercial, industrial and residential markets, recently introduced an outdoor-rated, 4-pair shielded twisted pair (ScTP) cable that meets and exceeds all industry standards for Wi-Fi tower transmissions. The new Wi-Fi cable (Product #1300A) is designed for use in wireless transmission systems provided by manufacturers such as Cisco, Motorola, NetGear, Nokia and other leading providers. WISPs (Wireless Internet Service Providers) also using these systems to provide wireless service to customers include AT&T Wireless, Cingular Wireless, Clearwire, Nextel, SBC and Verizon Wireless.

Belden developed the 1300A Wi-Fi cable in response to rapidly increasing market demand for efficient, convenient wireless networking technology – at home, at work and at play. Numerous businesses have added wireless capability to their wired LANs, and many airports, hotels, casinos and retail establishments now offer public access to Wi-Fi networks, called hot spots or hot zones. Although many of these networks are supported by different industry standards – including Bluetooth®, IEEE 802.11a, 802.11b, and 802.11g – Belden Wi-Fi cables are compatible with any system that uses RJ-45 connectors. The cable also adheres to two other applicable standards: TIA/EIA 568-B.2 Category 5e and Power over Ethernet (PoE) IEEE 802.3af.

Rugged Construction Key to Belden's Wi-Fi Cable Electrical Performance

Since Wi-Fi cables connect point-to-point and point-to-multipoint wireless LAN systems that run from the transmitting/receiving radios on the tower to the base station's internal electronics, they must be exceptionally rugged. Belden's Wi-Fi 1300A cable features a very thick (.030 in.), UV-resistant PVC jacket and has Belden's patented Beldfoil® shield bonded to the jacket's inner wall. This durable, weather-resistant construction allows the cable to deliver exceptionally stable electrical performance, even in high-traffic RF (radio frequency) environments.

In addition, Belden's Wi-Fi shielded twisted pair cable is easy to install and can be quickly terminated on standard RJ-45 connectors. Installation is also eased by a 24 AWG stranded tinned copper drain wire and by the sequential marking of the cable's PVC jacket at two-foot intervals.

For more information about Belden's Wi-Fi shielded twisted pair cable, contact Belden CDT Electronics Division, P.O. Box 1980, Richmond, Indiana 47375, or call 1-800-BELDEN-4 to request New Product Bulletin NP230. FAX: 765-983-5294. Or visit the Web site: www.belden.com.

About Belden CDT Electronics Division

Belden CDT Electronics Division, a unit of Belden CDT Inc., is a leader in the design, manufacture, and marketing of cable products for the entertainment, residential, industrial and security markets. It also provides highly engineered products for both the aerospace and automotive markets. Belden CDT Electronics Division is headquartered in Richmond, Indiana, it has manufacturing facilities in North America and Europe and distribution centers in the U.S., Canada, Singapore, Australia and the Netherlands. A majority of Belden's manufacturing, engineering and support functions are registered to the International Organization for Standardization.

Belden CDT Inc., formed in July 2004 through the merger of Belden Inc. and Cable Design Technologies Corp., is one of the largest U.S.-based manufacturers of high-speed electronic cables and focuses on products for the specialty electronics and data networking markets, including connectivity.

From:
Belden CDT Electronics Division
Frank Stone
1-800-BELDEN-4

Agency Contact:
Adventive Marketing, Inc.
Janet Killen
847-590-1110

Posted by Industrial-Manufacturing at 03:07 AM | Comments (0)

H.M. Cragg Co. Deploys 1st GenCore® PEM Fuel Cell at MN Telecom Companies - Replaces Battery Backup Power with Clean, Cost Effective Fuel Cell Alternative

PEM Fuel Cell adoption rate is growing within MN Telecoms and Utilities thanks to the help of MN-based provider of quality power solutions, H.M. Cragg Co., 3M, Entegris, Plug Power and the Minnesota Department of Commerce.

Minneapolis, MN (PRWEB) September 1, 2005 -- http://www.hmcragg.com/index-fuel-cells.html, H.M. Cragg Co., a MN-based provider of quality power solutions including proton exchange membrane PEM fuel cells and uninterruptible power systems (UPS) and batteries, today announced the successful installation of the GenCore® PEM fuel cell power backup technology at Ada-MN based Loretel Systems, Inc. at their central office in Glyndon-MN.

The Loretel Systems installation of cost effective and clean PEM fuel cell technology is a result of the collaborative efforts of H.M. Cragg Co., the Minnesota Department of Commerce, Plug Power Inc. and the cumulative energies of Minnesota-based 3M and Entegris.

Loretel Systems was one of two telecom providers to receive a grant from the Minnesota Department of Commerce which awarded grants to telecom providers demonstrating interest and commitment to clean energy via deployment of a fuel cell backup system.

H.M. Cragg Co. installed a five kilowatt 100 AMP fuel cell system at Loretel Systems Central Office in Glyndon MN.

"PEM Fuel Cell technology is the cost effective and clean power alternative of the future," said Paul Heggestad, H.M. Cragg, Co. president. "This is an important milestone for H.M. Cragg Co. and for the telecom industry. It shows there is a viable alternative for backup power that is cleaner, more reliable and ultimately more cost effective."

The PEM fuel cell units are housed outside the Loretel Systems facility and connected to a specially designed fuel storage cabinet. Each cabinet contains six hydrogen cylinders which, in tandem, provide up to 12 hours of clean backup power in the event of a "traditional" power outage. Up to 4 fuel cell systems can be daisy-chained together for delivery of additional kilowatts and/or longer run time.

The PEM fuel cell technology uses software and a modem to communicate remotely with Loretel Systems technicians. It can notify them of any alarm conditions such as low supply of hydrogen gas or an electrical malfunction via email, BlackBerry® or pager.

"I believe H.M. Cragg Co.’s installation of GenCore® PEM fuel cells from Plug Power are a safe and economical way to provide backup power to our Glyndon central office as well as other central office sites in the future," said Steven Katka, VP & General Manager, Loretel Systems, Inc.

PEM Fuel cells start at $20,000 plus installation, but require little maintenance and emit only heat and water as bi-products. With alternative battery backup power running at comparable costs, typically requiring significant maintenance and complex disposal techniques, fuel cells are quickly being adopted as the "right" energy alternative, especially in terms of return on investment (ROI) for Midwest telecom and utility companies.

To learn more about H.M. Cragg Co.’s PEM fuel fell capabilities visit: www.hmcragg.com/index-fuel-cells.html.

About H.M. Cragg Co.
H.M. Cragg Co. is a premier MN-based provider of quality power solutions including PEM fuel cells and uninterruptible power systems (UPS). Products include Anderson Connectors, C & D Technologies, Inc. batteries, Eaton Powerware UPS and UPS batteries. More information about the company can be found at www.hmcragg.com.

About Loretel Systems
Loretel Systems, Inc. with headquarters in Ada, Minnesota, has been providing telecommunications services to customers in northwestern Minnesota and eastern North Dakota for over 100 years. In addition to local and long distance calling options, Loretel Systems also offers digital subscriber line (DSL) technology and cable TV services to communities in and around its telephone exchanges. For more information about Loretel Systems, please visit www.loretel.com.

About 3M – A Global, Diversified Technology Company
Every day, 3M people find new ways to make amazing things happen. Wherever they are, whatever they do, the company’s customers know they can rely on 3M to help make their lives better. 3M's brands include Scotch, Post-it, Scotchgard, Thinsulate, Scotch-Brite, Filtrete, Command and Vikuiti. Serving customers in more than 200 countries around the world, the company’s 67,000 people use their expertise, technologies and global strength to lead in major markets, including consumer and office; display and graphics; electronics and telecommunications; safety, security and protection services; health care; industrial and transportation. For more information, including the latest product and technology news, visit www.3M.com.

3M, Scotch, Post-it, Scotchgard, Thinsulate, Scotch-Brite, Filtrete, Command and
Vikuiti are trademarks of 3M Company.

About Entegris
Entegris is the global leader in materials integrity management – purifying, protecting and transporting critical materials used in high technology products, processes and services for some of the world's foremost technology industries, including semiconductor, data storage, life sciences and fuel cell. For more information about Entegris, please visit www.entegris.com.

About Plug Power
Plug Power Inc. is an established leader in the deployment of clean, reliable, on-site energy products. More than 500 Plug Power fuel cell systems have been delivered to customers worldwide in commercial, public sector, telecommunications, utility and uninterruptible power supply markets. For more information about how to join Plug Power’s energy revolution as an investor, customer, supplier or strategic partner, please visit http://www.plugpower.com.

Posted by Industrial-Manufacturing at 03:06 AM | Comments (0)

Kozio Supports MIPS32 Processor Architecture and VoIP Products; Expands Processor Architecture Support to Add to Networking, Broadband and VoIP Capabilities

Kozio, Inc., a leading provider of embedded software for system-level hardware testing, today announced plans for support of the MIPS32 processor architecture with general availability October 1. Kozio provides a comprehensive system-level test package for custom hardware platforms with fast delivery times for supported processors. Support includes the ability for Kozio to provide outstanding system-level test coverage for any hardware product using a MIPS32 processor. All Kozio products will be updated to include MIPS32 processor support.

Longmont, Colo. (PRWEB) September 1, 2005 -- Kozio, Inc., a leading provider of embedded software for system-level hardware testing, today announced plans for support of the MIPS32 processor architecture with general availability October 1. Kozio provides a comprehensive system-level test package for custom hardware platforms with fast delivery times for supported processors. Support includes the ability for Kozio to provide outstanding system-level test coverage for any hardware product using a MIPS32 processor. All Kozio products will be updated to include MIPS32 processor support.

The move to add this support was spurred by the company's growing relationship with key customers and the resulting need to provide a complete test solution for Voice-over-IP (VoIP) products. Kozio develops turnkey software solutions that verify design and validate hardware for any embedded single-board computer systems for a variety of applications, including networking and communications technology.

"Integrating support for the MIPS32 processor architecture continues Kozio’s leadership position as the only embedded system-level test provider with the tools to accelerate board-level test," notes Kozio President Joseph Skazinski. "Our products help manufacturers and hardware designers reduce their effort while deploying more reliable technology faster than ever before."

The new release of Kozio's kDiagnostics software will support MIPS as well as offer complete digital signal processor (DSP) and VoIP test suites. Specifically, support will be added for:
* MIPS32 4K Core, a solution for multi-CPU system-on-a-chip designs, which are becoming increasingly popular in next-generation networking and broadband applications.
* Texas Instruments' TNETV1060 CPE Gateway Solution, a highly integrated software and silicon system-on-a-chip designed to address the requirements of residential and small office/home office (SOHO) gateways.
* Texas Instruments' programmable TMS320C55x™ DSP.

Kozio's new software versions will also deliver Foreign eXchange Office (FXO) and Foreign eXchange Subscriber (FXS) test suites for the two most common interfaces (ports or plugs) found in analog telephony environments

In addition to the general software release supporting the MIPS 32 architecture, Kozio also ports all of its comprehensive embedded system-level test products to custom platforms. This service is included with the price of a software license and can be completed, on average, in one week.

Kozio delivers a complete diagnostics and functional test solution for hardware board bring-up, manufacturing test and production-ready power-on self-test through its products: kDiagnostics for system-level diagnostics of embedded designs; kMfgTest for automated embedded manufacturing and functional test; and kPOST for off-the-shelf Power-On Self-Test (POST). These solutions from Kozio provide more complete testing throughout the development process, resulting in fewer spins in the prototype stages and fewer defects in the final product. Boards move from design through prototyping and manufacturing to release in less time, with less cost and fewer defects.

Kozio's latest software release includes new, enhanced, and extended support for a variety of technologies across all its products. In the past quarter Kozio has added drivers and test suites for NAND Flash devices, Host and Device USB test suites, PCI bridge support, LCD support, expanded Altera FPGA support and enhanced Compact Flash support. These new features expand on the already extensive Kozio Test Library, enhancing the company's leadership role in providing the most comprehensive hardware test software for board bring-up, manufacturing test and power-on self-test (POST).

About Kozio, Inc.
Kozio, Inc. develops software solutions that verify design and validate hardware for embedded single-board computer systems used in products such as ADSL gateways, wireless access points, network routers, voice solutions, security and test equipment, and aerospace systems. Kozio's products provide comprehensive test solutions, including diagnostics for board bring-up, automated manufacturing test, and built-in self-test software for manufactured products. Kozio's customers design, develop and manufacture boards used in computer-based electronic systems for the aerospace, networking, defense, test and wireless industries. Kozio products ease many embedded systems development challenges, from design through manufacturing and support, saving customers time and money. The company is privately held and based in Longmont, Colorado. For more information, visit www.kozio.com.

Kozio and kDiagnostics is a registered trademark of Kozio, Inc. All other trademarks are property of their respective owners.

Contact: Joseph Skazinski, Kozio, Inc., (303) 776-1356, e-mail protected from spam bots, or Brad Shannon, Shannon Marketing Communications, (970) 461-4906, e-mail protected from spam bots.

Posted by Industrial-Manufacturing at 03:05 AM | Comments (0)

RELEX, a Free Online Conference by the Reed Science Group, is Now Available On-Demand

The Research Lab Expo (RELEX), a free online conference and virtual exhibition launched by the Reed Business Information Science Group, is now available on-demand. The online conference addresses critical research areas, including chromatography, materials research, and spectroscopy.

New York, NY, September 1, 2005 -- The Research Lab Expo (RELEX), an online conference and virtual exhibition launched by the Reed Business Information Science Group, is now available on-demand. This free online event addresses critical research areas, including chromatography, materials research, and spectroscopy.

The online event features a high quality educational forum comprised of multiple live free webcasts. Leading industry experts and solution providers offer attendants a unique opportunity to participate directly from the comfort of their homes and offices.

The Research Lab Expo offers cutting-edge compelling web content to industry professionals and decision makers across multiple industries, including aerospace and defense, automotive, chemicals, petroleum, coatings, inks, adhesives, textiles, computers, software, office equipment, energy, utilities, environmental, food, beverage, tobacco, government lab, industrial equipment, instruments, laboratory, design, manufacturing, metal, materials, pharmaceuticals, biopharmaceuticals, healthcare, plastic, rubber, paper, pulp wood, scientific, medical, test instruments, semiconductors, electronic components, and telecom.

To register, please go to the online conference registration center, at http://relex.unisfair.com

Conference-At-A-Glance

Chromatography - Keynote Address

Searching for Markers of Cancer Using 2-D Chromatography
* Dr. David M. Lubman, Professor of Chemistry, University of Michigan
Understanding Chiral Recognition in Liquid Chromatography
* Clifford R. Mitchell, Researcher, Dr. Daniel W. Armstrong’s Lab, Iowa State University
The Evolution of Confocal Microscopy – An Overview From a Biological Perspective
* Dr. Stephen W. Paddock, Howard Hughes Research Specialist, Laboratory of Molecular Biology, University of Wisconsin
The Challenges and Progress toward Real-Time Biological Aerosol Detection and Identification
* Dr. Eric Gard, Division Leader for Defense Biology, Lawrence Livermore National Laboratory
Bioanalytical NMR Spectroscopy
* Dr. Daniel Raftery, Professor, Analytical Chemistry, Nuclear Magnetic Resonance, Purdue University
Imaging and Sensing with Terahertz Radiation
* Dr. Daniel M. Mittlemanm, Associate Professor - Electrical and Computer Engineering, Rice University

Digital Microscopy and Image Analysis - Keynote Address

Microscopy for Nanomaterials Characterization
* Dr. Nan Yao, Director, Imaging & Analysis Center, Materials Institute, Princeton University

Materials Research - Keynote Address

Challenges and Opportunities of Measuring Properties of Nanoparticles and Nanostructured Materials and the Need for Multi-Technique Approaches
* Dr. Donald R. Baer, Laboratory Fellow, Pacific Northwest National Laboratory
High-Efficiency Separation of Synthetic Oligonucleotide Oligomers
* Dr. Charles H. Lochmüller, Professor of Chemistry, Duke University
Scanning Probe Microscopy Techniques
* Marilyn E. Hawley, PI, Materials Science and Technology Division, Los Alamos National Laboratory
The Determination of Mercury at Ultra-Trace Levels Employing Cold Vapor Atomic Fluorescence with and without Gold Amalgamation
* Dave Pfeil, Product Manager ICP & Hg products, Teledyne Leeman Labs
Use of MALDI Mass Spectrometry for Identification of Microbes
* Dr. Charles Wilkins, Distinguished Professor, University of Arkansas
Event Sponsors

Hamilton:
Hamilton Company, a worldwide leader in the design and manufacture of manual, semi-automated, and robotic products for precision fluid measuring, was first to develop and manufacture pressure stable HPLC columns. Currently Hamilton Company manufactures 16 different polymer-based HPLC columns for reversed phase, anion exchange, cation exchange, ion exclusion, and amino separations. Two silica-based C-8 and C18 columns are available for reversed phase separations. Hamilton Company is a global enterprise with manufacturing facilities in Reno, Nevada and Bonaduz, Switzerland. Branch sales offices are located in France, Germany, and the United Kingdom. .

Olympus Scientific Equipment Group:
Olympus Scientific Equipment Group provides innovative microscope imaging solutions for researchers, physicians, clinicians, and educators. Olympus microscope systems offer unsurpassed optics, superior construction, and system versatility to meet the ever-changing needs of microscopists, paving the way for future advances in life science. Olympus is a precision technology leader, designing and delivering innovative solutions in healthcare and consumer electronics worldwide.

SpectroPure:
SpectoPure is the "newest" established standards company. It offers a broad range of metal standards (AA, ICP, ICP-MS, and blends), reference standards, conductivity standards, pH buffers, and other reagents and solutions for environmental analyses. It is a division of RICCA CHEMICAL COMPANY that specializes in satisfying the demands of the environmental industry, particularly in the areas of standards and solutions. The emphasis on spectroscopy, the exceptionally high purity materials used, and the detailed analysis that goes into its products made Spectropure the natural choice for the product line.

E. Fjeld:
E. Fjeld Company is a leading international supplier of precision mechanical and electronic systems for SEM/FIB instruments. E. Fjeld products are found in many fields, including medical, pharmaceutical, semiconductor, metallurgical nanotechnology, military and government labs, and universities.

SEMTech Solutions:
SEMTech Solutions sells and services reconditioned Scanning Electron Microscopes (SEMs). The company performs an "extreme make-over" of previously owned Field Emission, LaB6, and Tungsten SEMs. Upgrades include new digital imaging and modern PC technology. SEMTech service organization has more than 100 years of SEM experience.

Exhibitors:
ESA, Rice Lake Weighing Systems, Viscotech, GFS Chemicals, CDS Analytical Inc, Ocean Optics, Wyatt Technology, US Filter, ZEISS, RSI, LEAP Technologies, Anton Paar, Polymer Laboratoires, ANTEK, Nikon, Pacific Nanotechnology, Cole Parmer.

To register, please go to the online conference registration center, at http://relex.unisfair.com

Posted by Industrial-Manufacturing at 03:04 AM | Comments (0)

Sunny UK, a Wholly Owned Subsidiary of Roberts Warr, Launches New Website for Electronics and Low Voltage Power Supplies

Recently launched at SunnyUK.com, the large and well established electronics subsidiary is increasing its business and exposure on the internet with this new website. Featuring product lists, company information, contact details and more, it offers the best way for potential customers and retail partners to find out about Sunny UK.

(PRWEB) Sept. 1, 2005 -- Recently launched at SunnyUK.com, the large and well established electronics subsidiary is increasing its business and exposure on the internet with this new website. Featuring product lists, company information, contact details and more, it offers the best way for potential customers and retail partners to find out about Sunny UK.

Sunny UK is the British distributor for Sunny Computer Technology Co. Ltd. Supplying a competitive range of Linear/Switching Power Supplies, AC DC Adapters, CPU Coolers, AC Sources, Transformers, LCD Monitors and PCB Assemblies.

Sunny UK is now able to offer factory direct pricing, which means you will be able to purchase at much lower prices, but still retain the high quality that Sunny is known for. Sunny welcome your OEM projects and have the Design Team and Research Dept. ready to accommodate any special projects you might have. Sunny UK can act as your overseas warehouse right next door. In order to get factory direct pricing, you would expect to buy the products by the container load. Not at Sunny UK! You can buy short run quantities and still get the same low price as if you were buying by the container.

Visit www.sunnyuk.com to find out this reliable and long established business can privide power supplies and electronics, along with great service.

Posted by Industrial-Manufacturing at 03:02 AM | Comments (0)

Roberts Warr, Exclusive UK Power Supplier for Hitron, Launches New Website for Electronics and Power Supplies at www.robertswarr.com

Recently launched at www.robertswarr.com, the large and well established electronics supplier is increasing its business and exposure on the internet with this new website. Featuring product lists, company information, contact details and more, it offers the best way for potential customers and retail partners to find out about Roberts Warr services and Hitron power supplies.

(PRWEB) September 1, 2005 -- Founded in 1983, Roberts Warr has been the sole UK power supply supplier and sales representative for Hitron Electronics Corporation of Taiwan for 21 years. Going strong, the relationship has given electronics manufacturers, electronics engineers, medical engineers and all kinds of manufacturing companies the chance to purchase high quality Hitron power supplies at highly competitive prices.

The Hitron range embraces state of the art power supply technology and includes Linear, Switch Mode, Eurocard, Din Rail, Compact PCI AC-DC and DC-DC Power Supplies, Wallmount and Desktop External Adaptors, PCB Mounting and Encapsulated Power Supplies, Medical Power Supplies and many more.

All Hitron power supply manufacturing and design facilities are ISO9001/9002 approved and each product is produced to all International standards. In the UK, Europe and USA Roberts Warr offers a scheduled delivery service - allowing their customers to take full advantage of bulk quantity pricing whilst taking delivery from stock to your schedule.

RWE's highly experienced engineers back up Hitron's design excellence with expert knowledge of Power Supplies of all types, so not only can you expect quality products, but excellent service and assistance too.

Visit www.robertswarr.com for more information on products, services and contact details.

Posted by Industrial-Manufacturing at 03:02 AM | Comments (0)