« November 2005 | Main | January 2006 »
December 28, 2005
Free Tri-MixTM Tungsten Samples Offer Increased Life & Weld Quality
For a limited time, “The Tungsten Electrode Experts” at Diamond Ground Products are proud to offer free samples of Tri-Mix Tungsten, a scientifically balanced blend of three oxides in one multi-purpose tungsten.
Newbury Park, CA (PRWEB) December 28, 2005 -- For a limited time, “The Tungsten Electrode Experts” at Diamond Ground Products are proud to offer FREE samples of Tri-Mix Tungsten, a scientifically balanced blend of three oxides in one multi-purpose tungsten.
Tri-Mix offers stability and consistency to increase weld quality and service life dramatically. It increases the number or arc starts and decreases the amount of misfires. Tri-Mix features a low work function, so it requires less energy to start and runs cooler than common 2% Thoriated Tungsten. Unlike 2% Thoriated, Tri-Mix is also a non-radioactive tungsten.
To get your sample today, contact Diamond Ground Products or visit our website at www.diamondground.com
Diamond Ground Products is dedicated to the improvement of weld quality & welder productivity, and maintains a reputation as the industry leader in tungsten and tungsten preparation. Our ongoing management philosophy is to provide quality product and receptive service that exceeds even the most stringent expectations. Contact DGP today to see how we can help with your current or future welding applications.
For more information, contact:
Jim Elizarraz
Diamond Ground Products
2550 Azurite Circle Newbury Park, CA 91320
Ph: (805) 498-3837
Fax (805) 498-9347
E-mail: e-mail protected from spam bots
Website: www.diamondground.com
Posted by Industrial-Manufacturing at 10:18 PM | Comments (0)
December 26, 2005
Practical Bladder Repair System Reduces Web Shaft Repair Time to About Ten Minutes
With an innovative twist on a common web shaft issue Convertech has re-released its time-saving bladder repair system for lug and button shafts. By easing and reducing repair time Convertech's bladder repair system will ensure more uptime and fewer workplace injuries.
Wharton, New Jersey (PRWEB) December 25, 2005 -- With an innovative twist on a common web shaft issue Convertech has re-released its time-saving bladder repair system for lug and button shafts. By easing and reducing repair time Convertech's bladder repair system will ensure more uptime and fewer workplace injuries.
The easy-to-use bladder cartridges are designed with the safety and time of the operator in mind. Typical shaft repairs require specialized tools and difficult procedures to remove and replace damaged bladders. Convertech's bladder repair system does not require any special tools and is easy and simple to use.
Using the self-contained bladder cartridge can reduce reset time to as little as ten minutes. By keeping a spare bladder cartridge on hand shaft repairs can be easily completed by the operator without complex procedures or unecessary and dangerous shaft manipulation.
Convertech’s lug and button shafts are optimized for wider webs and designed to support your heavier loads. These shafts are now available in 3” (standard duty and heavy duty), 4”, 5” and 6” diameters.
For over a quarter century Convertech, Inc. has been the leader in exceptionally fast lead time with superior engineering and quality built into every shaft and chuck product. With it's competitors debilitating delivery time of as much as sixteen weeks Convertech's fast delivery time of about two weeks keeps customers up and running.
You can find out more about Convertech's time-saving repair systems at http://www.convertech.com
Interview Contact:
Larry Taitel
Telephone: 973-328-1850
http://www.convertech.com
Convertech Inc.
353 Richard Mine Road
Wharton, NJ 07885
+01-973-328-1850 voice
+01-973-328-7256 fax
www.convertech.com
Posted by Industrial-Manufacturing at 04:18 AM | Comments (0)
December 22, 2005
Haroon Inam Joins Cattron Group as Vice President of Global Engineering
Cattron Group International, a leading manufacturer of remote control products and professional services for the industrial, mining, commercial mobile and railroad markets, has announced the appointment of Haroon Inam as Vice President of Global Engineering reporting to the CEO.
Sharpsville, PA (PRWEB) December 22, 2005 -- Cattron Group International, a leading manufacturer of remote control products and professional services for the industrial, mining, commercial mobile and railroad markets, has announced the appointment of Haroon Inam as Vice President of Global Engineering reporting to the CEO.
Cattron Group International (Cattron Group) represents the group of subsidiary companies and product brands owned by Cattron Group Inc.
Inam will officially join Cattron Group the first of January, 2006, from his current position in management of Design Automation at Hamilton Sundstrand, a unit of United Technologies, in Rockford, IL. Inam comes to Cattron with over 19 years of engineering experience including aerospace and industrial experience leading large, diverse technical teams and creating world-class product development groups.
“We’re very fortunate to have someone of Haroon’s caliber leading Cattron’s global engineering initiatives,” stated John Paul, President and CEO of Cattron Group International. “His experience with sophisticated aerospace and systems design automation, in addition to his strong business sense, will enable us to maintain and enhance our corporate mission to bring world-class products to market.” Paul added that Inam’s skill with substantially reducing time-to-market and development of a global engineering footprint will significantly augment the company’s product development cycles necessary to maintain their market leadership.
Prior to Hamilton Sundstrand, Inam was Director of Engineering at Honeywell Power Systems and Vice President of Engineering at Best Power. He earned both his Bachelor’s (with honors) and Master’s degrees in Electrical Engineering from Duke University. He holds three patents in addition to a fourth patent that is pending. Inam has also completed executive training at University of Virginia’s Darden Business School and Harvard Business School.
With 60 years of radio frequency (RF) and industrial remote control experience, Cattron Group companies have a total installed base of over 125,000 remote control systems throughout the world. Its products are suitable for all industries including railroads, construction, shipyards, mining, aerospace, steel, military, agriculture, shipping, material handling, utility vehicles and many more.
Cattron Group International subsidiary companies have operations in the USA, Canada, UK, South Africa, Brazil and Europe, and are supported by an extensive sales and distribution network throughout North and South America, Europe, Asia, Africa and Australia. World Headquarters are located at 58 West Shenango St., Sharpsville, PA, 16150, USA. More information on the company is available by calling +1 (724) 962-3571 or on the internet at www.cattron.com.
Posted by Industrial-Manufacturing at 02:59 AM | Comments (0)
December 20, 2005
Speedline Announces Free Monthly Webinars to Tackle SMT Manufacturing Challenges
Speedline Technologies experts will tackle the SMT industry’s most pressing manufacturing challenges in a new series of free, monthly webinars. More info: Speedline Technologies experts will tackle the SMT industry’s most pressing manufacturing challenges in a new series of free, monthly webinars (www.speedlinetech.com/seminars).
FRANKLIN, MASSACHUSETTS (PRWEB) December 20, 2005 -- Speedline Technologies experts will tackle the SMT industry’s most pressing manufacturing challenges in a new series of free, monthly webinars.
Designed for OEM and CEM process engineers, each of the monthly one-hour Internet-based seminars will focus on challenges specific to a major surface mount technology manufacturing process – ranging from lead free printing to high speed underfill to practical DOE and SPC for electronics assembly to 0201 and 01005 component assembly – and more.
Experts from Speedline Technologies, the SMT industry’s single-source of process knowledge, solutions, and service, will host the online workshops. The webinars will include an educational presentation, discussion of new technologies and techniques, practical how-to advice, and a Q&A opportunity.
The 2006 schedule is:
• Thursday, January 19 - Lead Free Printing Process
• Thursday, February 16 - 0201 and 01005 Component Assembly Process
• Thursday, March 16 - Lead Free Reflow Soldering
• Thursday, April 13 - Adhesive Printing
• Thursday, May 18 - Pin in Paste (Intrusive Reflow)
• Thursday, June 15 - Lead Free Wave Soldering
• Thursday, July 13 - Challenges of High Speed Underfill
• Thursday, August 17 - Lead Free Printing Process
• Thursday, September 14 - Practical DOE and SPC for Electronics Assembly
• Thursday, October 19 - Cleaning Lead Free Residues
• Thursday, November 16 - MicroDot Dispensing
• Thursday, December 14 - 0201 and 01005 Component Assembly Process
All Web casts are free and will begin at 11 AM, U.S. Eastern time. For more information, or to register, go to www.speedlinetech.com/seminars or call 1-508-541-4749.
About Speedline Technologies
Speedline Technologies is the global leader in process knowledge and expertise for the PCB assembly and semiconductor industries. Based in Franklin, Massachusetts, U.S.A., the company markets five best-in-class brands — Accel microelectronics cleaning equipment; Camalot dispensing systems; Electrovert wave soldering, reflow soldering, and cleaning equipment; MPM stencil and screen printing systems; and Protect global services, support, and training solutions.
Speedline Technologies is Frost & Sullivan’s “2005 Surface Mount Technology Company of the Year.” For more information, visit: http://www.speedlinetech.com or contact Speedline at:
• USA: Speedline Technologies, 16 Forge Park, Franklin, MA 02038 USA, Tel: 1-508-520-0083, Fax: 1-508-520-2288
• Europe: Speedline Technologies GmbH, Im Gefierth 14, 63303 Dreieich, Germany, Tel: +49 (0)6103/832-0, Fax: +49(0)6103/832-299
• Asia: Speedline Technologies Asia Pte Ltd, 150 Kampong Ampat, #05-08 KA Centre, Singapore 368324, Tel: 65-6286-6635, Fax: 65-6289-9411.
Posted by Industrial-Manufacturing at 02:18 AM | Comments (0)
December 17, 2005
Stafford Manufacturing Corporation Celebrates 30th Anniversary
Stafford Manufacturing Corporation announced recently that they have just celebrated their 30th year in business. Stafford now occupies a 30,000 sq.ft. manufacturing facilty in Wilmington which they moved into in 1982 and now services many industries including medical instrumentation, excercise equipment, packaging machinery, automation systems,material handling conveyors, and more.
Wilmington, MA (PRWEB) December 17, 2005 -- Stafford Manufacturing Corporation announced recently that they have just celebrated their 30th year in business. Founded in 1975 by Arthur Stafford, the company began as a machine shop in nearby Woburn with a mission to supply shaft collars and related mechanical components to the power transmission industry. They grew to six employees that first year.
Today, Stafford Manufacturing Corp. occupies a 30,000 sq.ft. manufacturing facility in Wilmington which they moved into in 1982 and now services many industries including medical instrumentation, exercise equipment, packaging machinery, automation systems, material handling conveyors, and more. They now boast over 3,000 catalogued products including special components.
The hallmark of Stafford’s success has been encouraging “specials” or custom designed parts and their willingness to produce small quantities. According to Arthur Stafford, President, “We have a highly skilled and loyal workforce of more than 40 people and encourage innovation when solving our customer’s most challenging design requirements.”
For more information contact:
Stafford Manufacturing Corporation
Jim Swiezynski, Technical Director
P.O. Box 277
North Reading MA 01864-0277
(800) 695-5551 FAX (978) 657-4731
www.staffordmfg.com
Posted by Industrial-Manufacturing at 01:30 AM | Comments (0)
December 15, 2005
Worldwide Laser Introduce Zap-Alone Laser Controller Option for LP8000 Series of Co2 Laser Systems
Worldwide Laser Services Corporation introduces the Zap-Alone laser controller option for the LP8000 series of Co2 laser systems.
Gilbert, Arizona (PRWEB) December 20, 2005 -- Worldwide Laser Services Corporation, a laser automation and integration specialist announced today the introduction of their new Zap-Alone laser controller option now available on all LP8000 series of Co2 laser systems.
The new Zap Alone controller has a USB input and smart chip on board. The Zap-Alone board is incorporated into the LP8000 Co2 laser series power supplies and replaces the traditional interface PCI card that was located in the computer. The Zap-Alone board is located in the power supply, a laptop or remote computer is plugged into the USB port for dowloading the Zap-IT laser marking, laser etching, or laser cutting files which are retained by the smart chip on board the Zap-Alone. When programming is completed the laptop or programming computer is removed & the laser runs completely independently of any computer system.
Clients with multiple laser marking or laser cutting files can have the correct laser etching or laser cutting files automatically selected via binary input from a programmable controller or serial input using a devise such as a bar code reader among other methods, hundreds of laser marking, laser cutting, or laser etching files can be retained on the Zap-Alone smart chip.
The Zap-Alone laser controller option includes a system clock for automatic marking of time, date, Julian date, or designation of operating shift. When this is coupled with Worldwide Laser’s new proprietary laser controller software, Zap-IT and design cad front end, a powerful user friendly laser control system, that can run on any windows platform, is created.
The Zap-Alone options are perfect for laser marking, laser etching or a laser cutting system where lack of space will not allow a computer and monitor. It is also perfect for installations where security is important, and removal of the computer lessens the chance that laser marking, laser cutting, or laser etching files will be altered or misapplied.
The addition of a Zap-Alone system is available on all LP8000 series of Co2 lasers at no additional cost, for details or additional information on the Zap-Alone laser controller option just call Worldwide Laser 480.892.8566 option 5 or visit our web site www.wlsc.com
About Worldwide Laser
Worldwide Laser was founded in 1986 and the company has evolved into a respected major laser marking systems manufacturer. They have also developed an impressive list of national and international service and parts clients. Worldwide currently has active clients in ten countries on three continents. Worldwide has developed a major service organization for TEA CO2, CWCO2, and ND-YAG based laser marking products. They provide one of the largest inventories of spare parts in North America. Their own products include the LP2000 series of TEA Co2 lasers, the LP9000 series of diode & flash lamp YAG lasers, and the LP8000 series of Co2 lasers. Worldwide Laser has established a major laser marking job shop with TEA CO2, CWCO2, Diode, and flash lamp ND-YAG laser marking systems. For further information call (480) 892-8566 or visit their website http://www.wlsc.com
Posted by Industrial-Manufacturing at 02:42 AM | Comments (0)
December 08, 2005
Soiltac® Soil Stabilizer and Dust Control Agent Utilized For Adot Unpaved Road Projects
Arizona Department of Transportation (ADOT) approved and successfully applied Soiltac® copolymer emulsion as a new and more economical method for soil stabilization and dust control. The Soiltac® dirt road stabilization product has been proven to stabilize poor soils on unpaved roads.
(PRWEB via PR Web Direct) December 7, 2005 -- Arizona Department of Transportation (ADOT) approved and successfully applied Soiltac® copolymer emulsion (http://www.soiltac.com/ ) as a new and more economical method for soil stabilization and dust control. The Soiltac® dirt road stabilization product has been proven to stabilize poor soils on unpaved roads.
ADOT and the City of Mesa recognized the benefit of utilizing Soiltac® to suppress dust and improve the strength, stiffness and durability of the soft subgrade soils that make up many of their unpaved dirt roads. When used to solidify poor subgrade soils on unpaved roads, the Soiltac® soil stabilization solution reduces the required thickness of overlying asphalt pavement or other types of wear surfaces as well as increasing the useful life of the road. Furthermore, Soiltac’s® ability to stabilize almost any type of native soil or aggregate provides a significant cost savings over the costly traditional method of importing suitable aggregate to replace the existing native soil road base. This revolutionary road dust control and soil stabilization product is environmentally safe and is one of the first genuinely biodegradable soil stabilizers (http://www.soiltac.com/Environmental_Data.html). Unlike most soil stabilizers and dust control products currently on the market, Soiltac® does not contain any byproducts and is manufactured to a patented formula using strict engineering specifications.
Soilworks®, LLC is the innovator and manufacturer of Soiltac® liquid soil stabilizer and dust control agent. Soiltac® is a cost effective and innovative dust suppressant that is engineered for today's challenging soil stabilization and dust control needs (http://www.soiltac.com/Product_Information.html). This revolutionary product is a highly concentrated copolymer emulsion. The key to Soiltac’s® exceptional performance is its ability to form strong yet flexible three-dimensional bonds between soil and aggregate particles. Soiltac® is designed to be extremely durable and resistant to water, sun, alkaline and daily use. It can be as simple to apply as watering the ground. Furthermore, the Soiltac® road dust control agent is designed to be diluted with water and work its way down into the soil to maximize the penetration depth and minimize dust. Once cured, Soiltac® becomes completely transparent, leaving the natural landscape to appear untouched. Soiltac’s® results are based on the application rate used (http://www.soiltac.com/Application_Rates.html). Modest applications can create a light temporary surface crust that is ideal for erosion control and dust control needs. Heavier applications of Soiltac® can generate results similar to the qualities of cement or a low cost alternative to traditional asphalt paving.
The United States Army Engineering Research and Development Center (ERDC) and the Marine Corps Systems Command (MCSC) have evaluated many of Soilworks’® soil stabilizers, dirt road sealers and dust control agents, including Soiltac® (http://www.soiltac.com/Tests_Evaluations.html). As a result, all of the company’s products, Soiltac®, Gorilla-Snot®, Surtac® and Durasoil® continue to receive dust suppression and desert soil stabilization contracts as well as GSA orders (https://www.gsaadvantage.gov) to aid the United States Department of Defense for domestic and international theater operations, including Iraq.
ADOT’s use of Soiltac® was heavily weighted by its proven soil stabilization performance, unique characteristics and ability to save money over traditional dust control and road building methods (http://www.soiltac.com/FAQ.html). Soiltac® was applied by Cactus Transport, Inc. of Tolleson, AZ as well as its sub contractor, Asphalt Busters, Inc. of Phoenix, AZ. The Soiltac® was mixed into the existing native soil road base using a computerized distributor truck and an industrial road reclaimer to maximize efficiency (http://www.soiltac.com/Application_Equipment.html). The uniformly mixed base course was then compacted and allowed to dry and cure into a dense permanent base. Following the application of the surface wear course for dust suppression, the roads were then opened to traffic.
From unpaved heavy haul road soil stabilization to a light crust for construction site fugitive dust control, Soiltac® is actively solving soil stabilization and dust control challenges throughout the world's residential, industrial, commercial and military markets. For more information on Soiltac® dirt road sealer, dust suppression and soil stabilization products please visit www.soiltac.com or call 1-800-545-5420.
Contact: Chad Falkenberg
President/Owner
Phone: (800) 545-5420
Mobile: (602) 758-6465
Fax: (480) 545-5456
Website: www.Soilworks.com
Posted by Industrial-Manufacturing at 02:04 AM | Comments (0)
December 07, 2005
DBA Announces Marketplace for Manufacturing Consultants
New Web portal provides clients with a small-business alternative to ERP.
San Luis Obispo, CA (PRWEB via PR Web Direct) December 7, 2005 -- DBA Software Inc., the leader in ERP alternatives for small manufacturers, today announced the opening of its Consultants Marketplace, a new Web portal that enables manufacturing consultants and potential clients to meet and compare service offerings with customer requirements.
"Unlike ERP systems, which utilize a high-touch, high-cost sales model, we use a Web-based sales model that enables our small-business customers to get manufacturing software at a fraction of the cost of ERP," said Joe Hart, DBA's Consultants Program Manager. "In keeping with this model, our Consultants Marketplace establishes a community for consultants and clients who share a common set of interests based around our DBA Manufacturing Next-Generation software."
The typical DBA customer has five to 20 users. As ERP systems push down-market and promote to small manufacturers, resistance to the high cost and complexity of ERP is common. DBA offers consultants who service the small-business community an alternative that is scaled to fit the small-company environment.
The DBA Consultants Marketplace has three main components. First, consultants may add their contact information to free listings in the Consultants Directory, where they also can provide information about their services and background. Secondly, for a modest fee, consultants can advertise services within eight specialty categories. And thirdly, customers can post help requests, which are automatically e-mailed to the Consultants List for responses.
"In keeping with the spirit of the Internet, we are creating an open community without certification requirements or other barriers to participation," Hart said. "The Consultants Marketplace is open to any bona-fide manufacturing and accounting consultant who wants to get involved with our DBA Manufacturing Next-Generation product. Consultants are not endorsed or recommended by DBA, and customers are advised to do their own due diligence during the consultant selection process."
Consultants interested in this program can learn more by visiting the Support page at the company's Web site (www.dbamanufacturing.com).
About DBA Software Inc
DBA Software, Inc., a privately held company, has been a leading provider of manufacturing software to small businesses since 1992. The company's flagship product, DBA Manufacturing Next-Generation, provides manufacturers with an alternative to ERP systems that is scaled and priced for the small business environment. A free single-user version of the product is available for download at the company's Web site (www.dbamanufacturing.com).
Posted by Industrial-Manufacturing at 01:53 AM | Comments (0)
COGZ CMMS Software Releases Version 4.60 for Faster Performance
COGZ CMMS Version 4.60 is now available from COGZ Systems, LLC. With added multiple processor environment support, COGZ Version 4.60 offers users an increase to their maintenance management software performance. COGZ Systems, LLC continues to provide new capabilities to make preventive maintenance, work order management, and inventory control even more effortless and with this new version release COGZ CMMS program provides these benefits faster.
Woodbury, CT (PRWEB) December 7, 2005 -- COGZ CMMS Version 4.60 is now available from COGZ Systems, LLC. With added multiple processor environment support, COGZ Version 4.60 offers users an increase to their maintenance management software performance. COGZ Systems, LLC continues to provide new capabilities to make preventive maintenance, work order management, and inventory control even more effortless and with this new version release COGZ CMMS program provides these benefits faster.
With the release of COGZ version 4.60, users now have performance-related enhancements, but still with the same user-friendly, dependable program functionality that has always been at the heart of the COGZ CMMS software.
Version 4.60 provides performance enhancements with multiple processor support for Terminal Server and Citrix Server installations along with Windows XP Service Pack 2 support providing maintenance management improved support for preventive maintenance, work orders, inventory, and purchasing with an intuitive interface. Remote users benefit with increased speed and more effective maintenance management operations.
Easily incorporate the added performance enhancements in version 4.60 as the previous version can be quickly updated to this new release of COGZ CMMS software for added efficiency and successful maintenance management creating a thriving program that will meet increasing management requirements. Provide your corporate-wide program application with the increased speed and system performance available with the 4.60 COGZ CMMS version update.
http://www.cogz.com/updates/up460.htm
About COGZ Systems, LLC:
COGZ Systems, LLC is a leading provider of CMMS software for maintenance management. Since 1989, COGZ Systems has been supporting companies to effectively improve their maintenance management organization as they compete in the global marketplace. With the help of COGZ CMMS software, companies are increasing productivity by ensuring that their equipment is maintained for optimum performance and increased company-wide efficiency. Visit the COGZ Systems, LLC site for additional information: http://www.cogz.com/
Contact:
Lori Ewen
COGZ Systems, LLC
203-263-7882
http://www.cogz.com/
Posted by Industrial-Manufacturing at 01:52 AM | Comments (0)
December 06, 2005
Three Crucial Qualifiers for Material Handling Equipment Purchases
In the material handling equipment world, fixed conveyors are infamous for difficult maintenance, belt hassles and scant warranty coverage. Now there is a modular solution that addresses all three of those issues.
(PRWEB) December 6, 2005 -- In the material handling equipment world, ease of maintenance and uptime go hand in glove. Both affect productivity and profits. “The cost of a conveyor can be far greater than purchase price,” says Dan Duchamp of Gulf Coast Wire Products, a manufacturer of crawfish traps in Kaplan, Louisiana. Duchamp knows that maintenance is a major component of “true cost,” and considers it an insidious budget thief.
When choosing a system, one must consider the cost of regular maintenance, mishaps that can put production out of business, sufficient warranty coverage and belting options that don’t require constant realignment.
Qualifier #1: Look for a system that has minimal maintenance requirements. “It’s the benefits, the things you can do with it, and the things you don’t have to do, such as maintenance. One of the main reasons we bought a DynaCon® system was because it is durable plastic (polypropylene and polycarbonate) and non-corrosive,” Duchamp adds. Dynamic Conveyor Corporation (Muskegon, MI) produces the DynaCon® system, which features lightweight yet impact-resistant plastic construction requiring little or no maintenance.
With unique modular design, the DynaCon® system sections can be serviced, replaced or reconfigured easily because sides, belts, flights, drives and accessories are all separate units. Hit this system with a forklift, and it will likely “give,” quite possibly with little or no damage. If there is damage, replacing a section is as easy as snapping it into place.
Material handling equipment constructed of plastic construction are much easier to keep clean than metal ones. Plastic can be cleaned with water or detergents without risking rust, which may be very important to applications such as food handling.
Also, most conventional conveyors require regular lubrication in addition to continuous belt tensioning, whereas some modular systems are maintenance free.
Qualifier #2: Beltings on traditional conveyors are time-consuming to service and require frequent realignment. Look for link-style belting. When DynaCon® link-style belts are damaged, you only replace the damaged section of the belt. Constructed of interlocking links, belt repair and replacement are both easier and relatively inexpensive. A diagram of how the interlocking belts work is available on the manufacturer’s website.
Belting on traditional systems, (e.g., PVC), are difficult and time-consuming to install and service, require frequent realignment, and are more difficult to clean than plastic link-style belting.
Qualifier #3: Warranty coverage. Many conventional systems and even one-off designs have a short limited warranty period. Basically an insurance policy, a short warranty policy can save on purchase price, but is often a dangerous gamble, especially when an expired warranty affects service response.
DynaCon® systems carry a five-year warranty on materials and workmanship as well as a warranty on the motor and other electric components. Also consider the warranty on belts. PVC belts, such as those used on many standard fixed systems, need to be replaced every 18 months. DynaCon® provides a five-year warranty on all belting.
Call to see if a modular conveyor system is right for your material handling equipment application.
Posted by Industrial-Manufacturing at 01:49 AM | Comments (0)
Concrete Washout Systems Partner Wins Prestigious Arizona Environmental Award
Washout Systems of Tucson runs away with Governor’s Pride in Arizona Award for Pollution Prevention.
Elk Grove, CA (PRWEB via PR Web Direct) December 6, 2005 -- Concrete Washout Systems, Inc., (CWS) announced today that Washout Systems, LLC. of Tucson, Arizona, a CWS licensee, has received the coveted 2005 Governor’s Pride in Arizona Award for Pollution Prevention activities for its use and deployment of the patent pending Concrete Washout Systems™ container.
Arizona Clean and Beautiful hands out the Governor’s Pride in Arizona awards every year to companies whose focus is on litter reduction, elimination of illegal dumping, encouragement of recycling and improving the quality of life in the state. More information can be found by visiting; www.arizonacleanandbeautiful.org
“We are very pleased that Arizona Clean and Beautiful has chosen us for its 2005 Governor’s Pride in Arizona Award. We have been using Concrete Washout Systems patent pending container and system that not only meets and exceeds Best Management Practices (BMPs) but has set the standard for the industry as Best Available Technology for concrete washout containment,” stated Brian Ham, President of Washout Systems, LLC and Santa Rita Landscaping. “We continue to devote a lot of our efforts in educating the construction and erosion control industry professionals on the potential impact of illegal concrete washwater discharges and how our product and service can minimize their risk and exposure,” added Mr. Ham.
The patent pending CWS is a portable, self-contained and watertight bin that controls, captures and contains concrete washout material and wastewater. It allows trade personnel to easily washout concrete trucks, pumps and equipment on site and facilitates easy off site recycling of the same concrete materials and wastewater, while protecting the storm drain system from potential illegal discharges. The off site recycling component creates an even more environmentally sound application. This system replaces other outdated washout BMP’s, which are costly, unsightly and damaging to the environment since their containment value diminishes, due to inherently faulty material, over use and lack of maintenance.
About Concrete Washout Systems, Inc.
Concrete Washout Systems is a risk management specialist and industry pioneer in concrete washout and wastewater removal, treatment and recycling. The patent-pending Concrete Washout Systems provides a cost effective, environmentally friendly and compliance alternative for homebuilders, contractors, ready mix and pump operators and environmental engineering firms. For more information visit http://www.concretewashout.com
Contact:
Roger Engelsgaard
Concrete Washout Systems, Inc.
1-877-2-WASHOUT
Fax: (916) 689-0592
e-mail protected from spam bots
www.concretewashout.com
Posted by Industrial-Manufacturing at 01:48 AM | Comments (0)
December 02, 2005
Material Handling Equipment Distributor Provides Clientele with Specially Designed Equipment
Businesses and manufacturers can now order specially designed material handling equipment for specific business applications from Ergonomic Solutions, an innovative material handling equipment distributor that provides professionally engineered products.
(PRWEB) December 2, 2005 -- Businesses and manufacturers can now order specially designed material handling equipment for specific business applications from Ergonomic Solutions, an innovative material handling equipment distributor that provides professionally engineered products. Businesses that have a specific material handling equipment need can get the product engineered through Ergonomic Solutions.
While Ergonomic Solutions provides standard material handling equipment items, they can also give manufacturers a tailor-made product that specifically fits their client’s needs. These specially-engineered products save time and money because the equipment is precisely designed to work with a specific application. Ergonomic Solutions also believes that manufacturers and businesses that use the correct material handling equipment can reduce injuries within their workforce.
“We look forward to the opportunity to meet the needs of the business/industrial community in this highly specialized way,” said Brent Engelbert, Service Manager of Ergonomic Solutions. “From complete turn-key engineered systems to replacement parts, we are ready to serve our clients.”
Some of the standard material handling equipment Ergonomic Solutions provides includes lift tables, conveyors, hoists, and dock equipment. The Ergonomic Solutions website includes complete information with product inventory levels ready for purchase and delivery.
Visit www.ESIDirect.com to:
• Get more information on material handling equipment
• Order a catalogue of material handling equipment products
• Contact Ergonomic Solutions for information on specially engineered material handling equipment
About Ergonomic Solutions
Ergonomic Solutions is an innovative material handling equipment distributor that provides professionally engineered products as well as standard material handling and storage systems. Businesses and manufacturers can order professionally engineered material handling equipment that fits their specific business needs. They are located in Wichita, Kansas.
Search Engine Marketing and Press Release Advertising by Xeal Inc.
Posted by Industrial-Manufacturing at 03:08 AM | Comments (0)