Industrial Manufacturing News

« March 2005 | Main | May 2005 »

April 29, 2005

To Really Get in Shape, Do it on a Rubber Floor

The ideal floor for many sports activities is Toughsport Rubber Flooring from American Micro Industries, Inc. The sound and shock absorbing properties of this recycled rubber floor make it ideal for your home gym or the fitness center at “the Club”, the children’s playroom or a childcare center. Rubber flooring absorbs impact, thus reducing stress on the knees and other joints during aerobics. It quiets the sound of exercise equipment such as treadmills, stairmasters, and rowing machines and also reduces impact noise from clanging weights and footfall.

(PRWEB) April 29, 2005 -- To really get in shape you need the right shoes, the right clothes, and the right exercise equipment. A major but often overlooked element is the floor, and rubber is now the state-of-the-art flooring material for fitness and sports activities. Just as science and technology have greatly improved the effectiveness of our exercise routines by improving what we wear and the equipment we use, the floor under our feet has been improved, too. A hard-surfaced tile floor over concrete can actually be detrimental for many sports and fitness activities such as aerobics, gymnastics, yoga, or weight training. Harsh impact results in excessive stress on joints during aerobic activities, while the operational noise of exercise equipment can be distracting and take away from your total fitness experience.

The ideal floor for many sports activities is Toughsport Rubber Flooring from American Micro Industries, Inc. The sound and shock absorbing properties of this recycled rubber floor make it ideal for your home gym or the fitness center at “the Club”, the children’s playroom or a childcare center. Rubber flooring absorbs impact, thus reducing stress on the knees and other joints during aerobics. It quiets the sound of exercise equipment such as treadmills, stairmasters, and rowing machines and also reduces impact noise from clanging weights and footfall. This colorful floor is especially “kid friendly”, providing cushioning and a warmer touch for all those on-the-floor activities.

Toughsport Rubber Flooring comes in exciting color combinations, too, and because the color is imbedded throughout the material, the colors remain fresh and bright and will never wear off. Cleanup is a snap. Routine cleaning can be accomplished with broom or vacuum, or simply mop with mild detergent and water; no waxing or polishing is needed.

For areas of heavy foot traffic where attractive appearance and easy maintenance are required, this unique flooring material has the performance and endurance to be the all-around winner. You’ve got the right shoes, the right clothes, and the right equipment. Achieve maximum impact with your fitness program by adding Toughsport Rubber Flooring to your exercise routine!

Learn more about Toughsport Rubber Flooring and see color samples at http://www.soundprooffoam.com/toughsport-floor.html If you have questions or want to place an order, call American Micro Industries toll-free at 1-800-558-2058 Monday through Friday, 8:00 AM to 6:00 PM, ET or Email us at e-mail protected from spam bots.

About Americam Micro Industries, Inc.
Since 1995, American Micro Industries, Inc. has been a fabricator and distributor of specialized products. American Micro Industries, Inc. is a privately held, veteran owned business located in the mid-Atlantic region of the US in South Central Pennsylvania, conveniently located within 200 miles of almost 40% of the US population. In addition to its Chambersburg headquarters, AMI has numerous shipping locations to provide the highest level of logistics.

For more information about AMI, visit our website at http://www.americanmicroinc.com.

Posted by Industrial-Manufacturing at 06:41 AM | Comments (0)

Windshield Repair Equipment Manufacturer Offers Free Training & Certification

Delta Kits, Inc. Now Offering Free Windshield Repair Technical Training To Everyone, Regardless Of Equipment Manufacturer

Eugene, OR (PRWEB) April 29, 2005 -- Effective immediately, Delta Kits, Inc. is waiving the $300 fee to attend the industry leading comprehensive technical training & certification program in Eugene Oregon, which is designed to increase the skill level of windshield repair technicians across the country. This program will now be offered to all technicians, free of charge, regardless of the equipment they use.

"Delta Kits Certified Technicians have always been the most highly trained and successful windshield repair technicians in the industry," says Jeff Higgins, Vice President of Delta Kits, Inc. "Delta Kits has been consistently focused on the betterment of the entire windshield repair industry. By allowing anyone, even technicians who use equipment manufactured by other companies, to be fully trained, and we feel this is the next step in that direction. Substandard quality windshield repairs are becoming more of a problem, and we will do everything possible to encourage technicians to become trained, even if they are not our customers."

Delta Kits' training & certification courses accommodate varying initial skill levels. Upon completion of this course, even people who have never done a repair before the training will be among the best trained technicians in the industry. Each student will have the equipment provided for them during the class at no cost. These students will be given practice windshields where they will have extensive hands on training by fully qualified instructors on how to repair all types of windshield damage.

Upon successful completion of the hands on portion of this class, each student will be required to pass a rigorous written exam before receiving certification as a Delta Kits Certified Technician.

Added Higgins, "We as manufacturers need to take responsibility for this industry, and do everything we can to make sure technicians are certified and able to do quality windshield repairs on a consistent basis. By eliminating the cost of training, having no requirements to purchase our equipment, and supplying all equipment needed during the class, Delta Kits is raising the standards of what is to be expected of not only manufacturers, but also technicians who do windshield repair."

About Delta Kits, Inc.:
Delta Kits' innovative windshield repair equipment has long been the choice of professional windshield repair technicians worldwide. Founded in 1984, Delta Kits has grown to be the premier supplier of windshield repair equipment & training. Delta Kits is headquartered in Eugene Oregon, with distributors throughout the United States and all over the world. For more information about Delta Kits equipment or training, visit www.deltakits.com or call toll free at 1.800.548.8332.

Posted by Industrial-Manufacturing at 06:40 AM | Comments (0)

ESS Creates Interchangeable Prescription Lenses for Its CDI™ Sunglasses

To meet the needs of their customers who require corrective lenses, ESS has launched a new prescription insert accessory for their popular CDI™ sunglasses.

Sun Valley, ID (PRWEB) April 29, 2005 -- To meet the needs of their customers who require corrective lenses, ESS has launched a new prescription insert accessory for their popular CDI™ sunglasses. This new insert allows for the rapid interchange of multiple lens types – clear and tinted, or prescription and non-prescription – all in one sunglass frame.

The CDI™ sunglasses include two sets of interchangeable lenses, which can be swapped out by sliding the lenses in and out of the frame. Now, ESS is introducing the CDI™ Prescription Insert system, which consists of a pair of lens carriers that slide in and out of the frame just like the standard CDI™ lenses. The lens carriers can be fitted with prescription lenses by any optometrist, and then inserted in the CDI™ frame.

This system is ideal for those who want to have clear and tinted prescription lenses, or those who occasionally wear contact lenses and want their sunglasses to be able to accommodate either standard lenses or prescription lenses.

Posted by Industrial-Manufacturing at 06:40 AM | Comments (0)

Fenwal's Applications Lab Expands Into New Markets: Doubles OEM Customer Appliances Served in 2004

A higher percentage of manufacturers in emerging markets are expressing the need for application development support.

Ashland, MA (PRWEB) April 29, 2005 -- Fenwal Controls, Inc., a leading manufacturer of standard and customized automatic gas ignition and temperature controls for commercial and industrial OEM customers, has expanded the capabilities of its Applications Lab.

“OEMs in commercial cooking, hydronics, HVAC, pool/spa and RV have fast-track new product development timelines and are using Fenwal to optimize their designs and maximize performance and reliability. In 2004 the number of customer appliances under evaluation in Fenwal’s applications lab doubled over the previous year, as a higher percentage of manufacturers in emerging markets expressed the need for application development support.

“Beyond commercial and industrial, we’re seeing more projects in residential and municipal markets for automatic ignition of specialty luxury gas appliances,” says Jerry Harting, Director of Sales and Marketing, Fenwal Controls. Projects currently under evaluation include customers’ gas fireplaces as well as gas lanterns, which have found renewed popularity.

Fenwal’s Applications Lab is well positioned to provide product configuration services for these emerging markets and continue to service mainstream products in the commercial and industrial markets. In operation since 1985, the Applications Lab is headed by Paul Finn, a seasoned Applications Engineer with years of hands-on experience troubleshooting agency-approved products. Finn explains, “It’s not always a one-size-fits-all scenario. In the lab we can configure a complete control system that will ensure the highest level of performance and reliability.”

“Customers tell us this service isn’t widely available in the industry, particularly for small to mid-sized manufacturers who need expertise they may not have in-house,” Finn adds. “Our Applications Lab delivers speed to market that is of real value to our customers.”

About Fenwal Controls
Founded in 1935 as the manufacturer of the patented THERMOSWITCH® temperature controller, Fenwal Controls (www.fenwalcontrols.com) now offers a broad range of agency-approved gas ignition and temperature controls. The company configures their own line of spark electrodes, and also tests new products that are entering the market such as Silicon Nitride Hot Surface Igniters to characterize their performance for safe and efficient use with Fenwal controls. Fenwal Controls has a long history of providing standard and custom engineered solutions for many industries including HVAC, hydronics, commercial cooking and fire protection. Fenwal Controls is a division of Kidde-Fenwal and has both domestic and international sales offices.

Posted by Industrial-Manufacturing at 06:38 AM | Comments (0)

Proctor & Gamble Selects EASA to Simplify and Streamline Access to Modeling and Simulation

Procter & Gamble selects EASA for the development and deployment of custom web-based tools to reduce the number of physical prototypes required and to allow more designs to be evaluated earlier in the design cycle.

Pittsburgh, PA (PRWEB) April 29, 2005 -- EASA Software & Services (a division of AEA Technology PLC), a leading global provider of codeless application development software, today announced that Procter & Gamble has selected EASA to enable a global application development and deployment platform throughout all of Procter & Gamble and its subsidiaries.

“Globally dispersed and culturally diverse internal customers have not historically had access to some of our most valuable design and analysis tools,” said John Clisham, IT Manager for P&G’s High Performance Computing group. “The EASA platform has changed this; we can now rapidly build and deploy to the enterprise custom web-based applications that facilitate the use of our existing tools, such as CAD, FEA, Excel, and even legacy codes and databases. The benefits are clear; the requirements for expensive and time-consuming physical prototypes are reduced, and more designs are explored. This results in improved product quality, and reduced time to market.”

”We are delighted that EASA is providing a tangible return on investment for P&G,” said Sebastian Dewhurst, President & CEO of EASA. Matthew Rumenapp, Mid-West Regional Manager, added “P&G’s thorough investigation into several technologies, including conventional programming tools, clearly revealed EASA’s fundamental strength – it is the leading platform for ultra-rapid application development and deployment.”

About EASA Software & Services
EASA helps companies to save time and money by automating, integrating, and sharing their processes. EASA provides a straightforward, codeless methodology for creating professional, web-based applications which can be rapidly published to a user-base. The custom applications created can be used for a variety of purposes: to automate a sequence of one or more underlying software tools, for example transforming complex CAD and FEA models into simple applications which can be safely used by staff anywhere in the enterprise, even if they have no experience with the underlying software. EASA is also frequently used to build and publish applications which function as “wrappers” around legacy or “green-screen” codes and databases, eliminating costly rewrites and removing deployment issues.

EASA technology is covered by US Patent Number 6,430,609.

EASA is a division of AEA Technology, PLC
(London: AAT).

About P&G (NYSE: PG)
Two billion times a day, P&G brands touch the lives of people around the world. The company has one of the strongest portfolios of trusted, quality, leadership brands, including Pampers(R), Tide(R), Ariel(R), Always(R), Whisper(R), Pantene(R), Bounty(R), Pringles(R), Folgers(R), Charmin(R), Downy(R), Lenor(R), Iams(R), Crest(R), Actonel(R), Olay(R), Clairol Nice 'n Easy(R), Head & Shoulders(R), and Wella. The P&G community consists of almost 110,000 employees working in over 80 countries worldwide. Please visit http://www.pg.com for the latest news and in-depth information about P&G and its brands.

Posted by Industrial-Manufacturing at 06:38 AM | Comments (0)

Manual Machinists are a Dying Breed

Job Shops are struggling to stay alive due to a lack of trained, manual, conventional machinists. Computerized (CNC)s machinists have flooded the market for mass production, leaving no one to fill the void in the repair industry.

(PRWEB) April 29, 2005 -- Zwerner Industries in San Bernardino, California, is a job shop that is struggling to stay alive, not because of lack of work, but because of a lack of skilled manual machinists to operate their conventional machines.

Unlike computerized machines that turn hundreds or thousands of like parts, small job shops in the repair business usually only repair one part at-a-time, or they have to make a new part to fix something that is so old that there are no parts sitting on a shelf in some warehouse. And here's where the problem begins.

Schools and government programs encourage those interested in becoming machinists to learn CNC (Computer Numerical Control) machines. No one seems to be training younger workers on the conventional machines. When older, experienced conventional (manual) machinists retire, there is no one to take their place.

Job shops like Zwerner Industries own machines that are 30 to 50 years old, some dating back to World War II. Keeping them running is also a challenge. "The only maintenance mechanic we know of that is skilled in fixing our machines was pulled out of retirement," said Kim Zwerner, Owner. "At times, we have to make the parts to fix our own machines."

Eighty percent of Zwerner Industries' business is emergency repair work. A company may be in the middle of a scheduled job when their equipment breaks. These types of emergency repairs are almost a daily occurence. When their job stops, it means money lost for them. Zwerner Industries specializes in fixing their problems. But for how long? Without the trained machinists in the personnel pool, things are looking grim.

In an effort to plan for their future business, Zwerner Industries has hired a couple of young, talented trainees. Zwerner Industries is taking the time to train and give these young men the skills that are needed, but it takes time. And they will still be faced with trying to find maintenance mechinics able to keep their machines running.

It is Zwerner Industries' hope that schools and government programs will soon realize the importance of returning to conventional machines and give future machinists the training that will provide them with a secure future.

Posted by Industrial-Manufacturing at 06:37 AM | Comments (0)

Panel-Mountable Pressure Transducers Eliminate Threat of Leaks in Corrosive Media

Pressure transducers form a critical function in today’s closed -loop systems, providing data for safety, control and alarm functions encountered in typical industrial applications such as heating boilers, HVAC/R, gas correctors, compressors, test stands, fire suppression equipment and power generation. These sensors measure a wide range of benign and corrosive media.

(PRWEB) April 29, 2005 -- System integrators and panel builders traditionally relied on sensors mounted to bulkhead fittings in order to form of pressure connection for pressure measurements. This meant that in a typical panel, the sensor was mounted inside to a panel-mounted bulkhead fitting and sealed by means of Teflon tape or face O-ring and requires an additional connection between the bulkhead fitting and the hose. The seals between the sensor, bulkhead fitting, and the hose are critical and, if not formed correctly, can lead to leaks and eventual failure of the system, particularly in systems that handle water, steam, corrosive gases and liquids.

Using panel-mount pressure sensors, such as American Sensor Technologies (AST) Model AST4200, can overcome this problem as these sensors were designed to provide a hermetic seal against the media without the use of adapters. The unique one-piece bulkhead design of the AST4200 mounts through the panel to keep hazardous media out of the control box. Secondly, the solid one-piece 17-4PH or 316L high strength stainless steel design is free of welds, internal O-rings or fluid-filled cavities, making it ideal for applications that require high proof and burst pressures. The sensor requires a minimal mounting configuration that utilizes a standard panel punch. A locknut is used to hold the sensor to the panel, and leaves room for a gasket to be used. Two wrench flats on the nose of the sensor allow the user to tighten the external pressure tubing to the sensor without turning the part.

Units offer outputs of 10mV/V, 4-20 mA or 1-5V. Units provide long life and resistance to media corrosion as well as superb over range and burst protection. In addition to utilizing strain gauge technology, the AST4200 offers wetted material such as titanium and nickel alloys with its own-patented Krystal Bond™ Technology to produce strain gauge sensors that yield a high output with low thermal errors.

The AST4200 pressure sensors provide gauge, sealed gauge or compound gauge pressure measurement in ranges up to 10,000 PSI. Sensors are calibrated and temperature compensated to ensure stability over specified ranges. For additional information, please visit American Sensor Technologies website at www.astsensors.com or email at e-mail protected from spam bots

About AST
AST manufacture state-of-the-art, MEMS-based pressure sensors, transducers, and transmitters that offer the best price-performance ratio in the industry. Common applications of AST sensor products are in industrial OEM, hydraulic systems, fuel cells, medical gases, HVAC/R, refrigeration (ammonia, Freon, CO2), oil & gas exploration and production, and off-road vehicles. By combining exotic metals and AST’s exclusive, proprietary Krystal Bond™ Technology (an advanced process in which inorganic materials are molecularly diffused onto a metallic surface in the presence of certain gases), AST can produce high-performance strain gauge pressure sensors that support the specialized needs of key niche markets. Many AST products are UL listed as intrinsically safe and certified for explosion-proof required environments. Some of the world’s most highly respected industrial Fortune 500 corporations have tested and now use AST products in a wide range of critical and harsh environments. For more information on AST products and technology, go to AST’s website at www.astsensors.com.

Posted by Industrial-Manufacturing at 06:37 AM | Comments (0)

Small Parts Stored With Plenty of Room to Spare

Diamond Phoenix, a integrator of material handling systems, recently installed a SMARTdepot Vertical Lift Module for Qualtex in its Denton, Manchester facility. Qualtex, Europe’s largest manufacturer and distributor of domestic appliance spare parts, was quickly running out of space to store its increasing inventory.

(PRWEB) April 29, 2005 -- Diamond Phoenix, a leader in the integration of high performance material handling systems, recently installed a SMARTdepotTM Vertical Lift Module for Qualtex in its Denton, Manchester facility. Qualtex, Europe’s largest manufacturer and distributor of domestic appliance spare parts, was quickly running out of space to store its increasing inventory.

Established over 40 years ago, Qualtex has more than 4500 product lines, including washing machine spare parts and vacuum bags. The recent addition of 2000 new stock items of small moving parts meant that Qualtex required an effective storage system to improve productivity and efficiency within its distribution center. The solution was the Diamond Phoenix SMARTdepotTM, which was installed at the facility in November 2004.

The Diamond SMARTdepot™ Multi-bay Vertical Lift Module with its patented Cross-bayTM technology provides significant space savings when compared to a more traditional static shelving system. The increase of storage density can result in floor space recovery of more than 75% and picking productivity can be increased by up to 2.5 times because walking and searching times are significantly reduced or eliminated.

Philip Hulme, Managing Director of Qualtex said, “Following a recommendation from another supplier, I chose Diamond Phoenix based on its new technology. Seeing its machines in operation at another site reinforced my decision to make this investment.”

Standing nearly 36 feet tall, the SMARTdepotTM makes maximum use of the vertical space in the building. Parts are stored on trays approximately 75 inches wide by 32 inches deep. As employees fill orders, trays are automatically delivered at ergonomically correct heights.

Philip continued, “Diamond Phoenix equipment stands out from other suppliers, and I am extremely pleased with the service it provided. I am positive the SMARTdepot will make significant improvements to the way Qualtex is run, and I intend to maintain a close relationship with Diamond Phoenix for any potential future investments!”

For more information, visit http://www.diamondphoenix.com.

Diamond Phoenix is the industry leader providing integrated materials handling solutions for order fulfillment systems. Diamond Phoenix is headquartered in Lewiston, Maine with offices in Philadelphia, PA, Charlotte, NC, Salt Lake City, UT, Grand Rapids, MI, Los Angeles, CA, Cincinnati, OH, Cleveland, OH, Atlanta, GA, and London, England. For more information about Diamond Phoenix products and services, go to www.diamondphoenix.com.

Posted by Industrial-Manufacturing at 06:36 AM | Comments (0)

New Madvac 101 ‘Engine Cut-Off’ Option

Madvac offers a new engine cut-off option to the Madvac 101: The world’s fastest vacuum litter collector.

(PRWEB) April 29, 2005 -- Consistent with its tradition of innovation, the Madvac 101 is the ultimate in versatility and offers unmatched manoeuvrability while disposing of litter. Expertly designed to meet the cleaning challenges of today’s busy streets, the Madvac 101 is a high profile, cost-efficient cleaning machine. Most importantly, the Madvac 101 gives you options to customize your machine to your needs.

The new “Engine Cut-Off” option prevents the operation of the Madvac 101 by shutting the engine off if the operator attempts to leave the operator’s seat without properly setting the parking brake. When this results, the engine shuts off after 5 seconds. When the parking brake is properly engaged, a pilot light is illuminated on the dash to indicate that it is safe to leave the operator’s seat while the engine is kept running. As a result, it becomes impossible to start a Madvac 101 when the parking brake is not applied and when the operator’s seat is vacant.

Features of the Madvac 101 vehicle

- Patented straight through suction
- 80-gallon capacity litter container
- 28 hp Kubota liquid cooled diesel
- 8” diameter suction hose
- Power Assisted Vacuum Arm
- Available in Gasoline, Diesel, and Liquid Propane

Contact Information
Name: Andre Pollmueller
Toll Free : 1-800-862-3822
Tel: +1 (450) 616 8100
Fax: +1 (450) 616 8103
E-mail: e-mail protected from spam bots

Posted by Industrial-Manufacturing at 06:35 AM | Comments (0)

Johnston Madvac Introduces the New VT605/650 Pure Vacuum Sweeper

The New Johnston VT606/650 is designed to meet the requirements of the most demanding municipal and contractor applications.

(PRWEB) April 29, 2005 -- Equally at home on municipal street cleaning or heavier duty work sites, the VT605/605 delivers consistently high pick-up performance – even in contractor applications such as road resurfacing and dirt pick-up around construction sites and access roads.

With durable, rugged construction and more standard features than any other vacuum sweeper on the market, the VT605/650 versatility makes it ideal for a variety of sweeping applications from highways to residential areas and construction sites to parking lots.

Its trademark gearbox driven vacuum fan and 343-gallon stainless water tank has made it the favorite and repeat choice of governments, contractors, cities, towns and municipalities.

Features of the VT605/650
-John Deere turbocharged diesel engine
-Sealed engine compartment
-8.5 cu. Yd. Stainless steel debris hopper
-Top mounted catch basin hose
-190 sq. in. vacuum nozzle
-Straight-through suction system
-Hopper dumping system is powered off the rear engine

Johnston background: Johnston Madvac Inc has a worldwide customer network of 200 stocking distributors in over 70 countries. Madvac designs and manufactures vacuum litter collection vehicles since 1986, and has unquestionably become the leader in its field on the world market. It delivers total quality vehicles for airports, highways, amusement parks, cities & municipalities, federal & state properties, industrial & commercial complexes, landfill sites, parks, campgrounds, schools & universities, shopping centers & parking lots, streets and underground garage applications.

Posted by Industrial-Manufacturing at 06:33 AM | Comments (0)

Scott Specialty Gases Partners with E Instruments Group LLC by Providing Scotty Calibration Kits

Scott Specialty Gases partners with E Instruments Group LLC by providing Scotty Calibration Kits

Plumsteadville, PA (PRWEB) April 29, 2005 -- Scott Specialty Gases supplies portable Scotty® Calibration Kits that make it easy to calibrate on-site instruments manufactured by E Instruments Group, LLC. Each kit provides everything needed for fast, convenient instrument calibration and includes a high-density polyethylene carrying case containing 28 and 35 liter Scotty Transportable cylinders of calibration gases, single-stage pressure regulators and flexible tubing. A variety of Scott gas mixtures are available, including: nitrogen dioxide, sulfur dioxide, carbon monoxide, carbon dioxide, methane and hydrogen sulfide. Custom gas mixtures in Scotty Transportables are available for all types of laboratory and in-field instrumentation.

Scotty Transportables, the industry's most accurate brand of nonreturnable specialty gases, provide high-purity, accurate calibration gases in a variety of small gas cylinder sizes and volumes. High reliability and convenient size make them a cost-effective alternative to returnable, high-pressure cylinders whenever portability or limited gas quantity is needed. Scottys deliver substantial cost savings by eliminating gas cylinder rental and two-way shipping charges associated with refillable cylinders.

Scott Specialty Gases is the sole-source producer of gaseous SRM candidates for NIST and is the world's largest supplier of EPA protocol gases. The company is a worldwide supplier of pure and mixed gases for applications that include natural gas, environmental, homeland security, laboratory, industrial, petrochemical, medical and semiconductor applications. Scott maintains numerous manufacturing facilities in both the U.S. and Europe. Here at scottgas.com, the specialty gas industry's largest website, online ordering, eScott Online Supply Chain Management and other innovative eTools are featured that empower Scott customers to substantially reduce operating costs.

E Instruments Group, LLC is a manufacturer of innovative instrumentation solutions for the power, process, industrial, institutional, food, and HVAC markets. Four business units include: MicroCal signal, pressure and temperature calibration equipment; HVAC instruments; GreenLine portable flue gas/combustion analyzers, and; IRtec hand-held and online infrared thermometers.

For more information about Scotty Calibration Kits, Scotty Transportables and other Scott products and services - browse their website http://www.scottecatalog.com now, call 800-21-SCOTT or send email to: e-mail protected from spam bots.

Posted by Industrial-Manufacturing at 06:33 AM | Comments (0)

April 28, 2005

UK Industrial Fasteners Market Research Report

After researching the UK industrial fasteners market development and taking into account various other factors the following conclusions can be drawn from MBD's report:

Market Review 2000-2004

UK demand for industrial fasteners has fluctuated during the five year review period, with a year of growth followed by a year of reduced demand in each year since 2000. In 2003, sales fell by 2% although this is believed to have been more than offset by a 2% increase in 2004, taking the market to £572.2 million at MSP. Growth has been stimulated by a buoyant construction market, while reduced demand from other enduse sectors such as the automotive industry as well as intense price competition has hindered a more positive development in the market.

Market Forecast 2005-2009

The UK market for industrial fasteners is influenced by the construction sector where further output growth is expected during the next few years. As such, MBD anticipate moderate growth in the fastener sector during the five year the forecast period. Between 2004 and 2009, sales of industrial fasteners are forecast to increase by 2% in real terms. Stronger value growth is expected to be restricted due to increased competition form cheap imports, as well as reduced demand from some enduse industries such as the automotive sector.

Posted by Industrial at 08:53 PM | Comments (0)

Experts Say: "If You are Not in China, You are Not in Business”. New “tell-it-as-it-is” Site Launched today. Provides Window into China for Non-Chinese Executives

Launched today as 'a comprehensive news and knowledge site’ with a eye-popping strap line “If You Are Not In China, You Are Not In Business”, the site www.chinaobserver.cn is targeted at busy board members and senior managers in America, Europe, and Asia, who need to know about China but have no time to search through thousands of English language and Chinese language web sites and journals to understand what is happening, China Observer tells them what will impact their business. Unlike many other websites that claim to give the insider view of doing business in China, this site delivers on its promise. Written by experienced business executives it contains China business news, in-depth interviews and high-quality strategy papers selected and written for relevance to non-Chinese executives who are considering their “China Entry Strategy”.

(PRWEB) April 28, 2005 -- Launched today: and accessible at www.chinaobserver.cn , a comprehensive news and knowledge site with a eye-popping strap line “If You Are Not In China, You Are Not In Business”. Unlike many other websites that claim to give the insider view of doing business in China, this site delivers on its promise. Written by experienced business executives it contains China business news, in-depth interviews and high-quality strategy papers selected and written for relevance to non-Chinese executives who are considering their “China Entry Strategy”. A comprehensive and impressive site – China Observer brings together quality content with convenience of delivery.

The site is targeted at busy board members and senior managers in America, Europe, and Asia, who need to know about China but have no time to search through thousands of English language and Chinese language web sites and journals to understand what is happening, China Observer tells them what will impact their business. Content is relevant to a wide range of decision makers; it also has a slant towards Information Technology, and Application and Business Process Outsourcing.

China Observer's strategy section brings insight and perspective from notables such as Minister Mentor, Lee Kuan Yew - statesman, visionary and founder of modern-day Singapore, and Dr Timothy Chou, former President of Oracle On Demand. The interview section reveals the thoughts and ideas of respected and senior Chinese Executives on their business and their country, while dispensing pragmatic and valuable advice for companies looking to enter China.

China Observer is one of the first ever sites to use “internet broadcasts” for intellectual content - download edited “Executive Sound-bites” (a five minute version) or listen to a full 15 to 20 minutes interview on your PC or Mp3 player.

The news section is an easy to read synopsis of current stories (from English and Chinese media). “Events”, “China 101”, and “Books You Should Read” laser target executives to information about China.

Bill Lewis, Editor of China Observer says, “I believe fervently that the China Observer strap line “if you are not in China you are not in Business” says it all. Executives who arrive next year to look at China may find themselves in the “laggard” category.”

The big problem is that there is a vast mountain of data on China flooding the Internet and traditional media. Executives do not have the time or resources to sift through this deluge of information, much less analyze it. China Observer brings relevant information quickly onto Executives desk tops – informing, educations, and prompting action.

China Observer - an online comprehensive intelligence and knowledge site containing China business news, in depth interviews, high quality strategy papers and information targeted at busy executives in America, Europe, and Asia, who must know about China. “If you are not in China, you are not in Business” is becoming a business truism, China knowledge is essential. No China Strategy - play catch up!

China Observer published by Temasys International, a bilingual, bicultural specialist consulting company assisting businesses to develop and execute their China strategy. Temasys executives and consultants fuse East and West.

More information www.temasys.com.sg

Journalists register on china observer using free press registration: e-mail protected from spam bots password “press”.

e-mail protected from spam bots - additional information, logo, artwork on +65 9436 6333

e-mail protected from spam bots - Interview Contact on: +65 9839 5371

Bill Lewis’s profile is available at www.temasys.com.sg (click on “people” tab).

China Observer, 7 Temasek Blvd #21-02 Suntec Tower One Singapore 038987

Posted by Industrial-Manufacturing at 01:00 AM | Comments (0)

Jetpod Innercity Aircab/multi-role Aircraft

Appointment of Jet Central Limited; CNN news coverage; Technology funding; Investor news; and Technology update.

(PRWEB) April 28, 2005 -- Avcen Limited in London is pleased to announce the following: Jet Central Limited, a newly formed sister Company to Avcen Limited, has been appointed sole worldwide agent responsible for offering specific advice to global city municipals on Jetpod innercity VQSTOL operations. This will allow Avcen time to concentrate wholly on all matters relating to the production of the Jetpod. Jet Central will also offer advice on inner-city landing sites, Jetpod pilot training, aircraft routing and the suggested method of commercial operations in the form of a centralised franchise. Jet Central will also be placing city municipal related aircraft orders with Avcen in due course. Jet Central will not place military or personal jet aircraft orders. All Jetpod and Jet Central sales will be centralized from Europe.

CNN has since the 19th April 2005 been covering the Jetpod extensively on their website and on TV. TV coverage of the Jetpod has been seen on several occasions just before prime-time TV news. The Jetpod has also appeared as a feature on the CNN Spark Technology Show on 24th April and is forecast to appear;
April 28
22:30 CEST (20:30 GMT)
Friday, April 29
13:30 CEST (11:30 GMT)
24:00 CEST (22:00 GMT)

The estimated viewers of the Jetpod on CNN will have run into the billions during this period, as some of the coverage has also been aired in the USA and in Asia.

Technology backers can be seen on our site.

Since 15th April 2005, Avcen has offered 20% of the Company in the form of 200 shares to help fund the proof-of-concept flight trials next year. Thus far, we have been inundated by investors looking to purchase individual shares. In the meantime we are encouraging one or two large-stake investors to come forward and take either 50, 100, or all 200 shares and benefit from this once-only opportunity.

Additional modifications and additions are as follows:
- The aircraft will be fitted with self-sealing fuel tanks;
- The primary flight instrument displays will be clustered into shaped housings to represent the different instrument groupings. Each cluster will be moveable and positionable by the single-seat pilot;
- Blown-air windscreen and heated filament heating will be installed instead of whole-leaf screen heating
- Foldaway ultralight seating will be design assisted in-house but produced separately by a supplier.

City University is continuing with a paid-up six months of research into additional and routine Computational Fluid Dynamics assessment of the Jetpod`s improved wing shape.

We are now getting ready to bring people, materials, systems and tooling together to create the first proof-of-concept Jetpod. The first flight is scheduled for next year.

The Jetpod will revolutionize the way we travel.

Mike Dacre MSc., Managing Director, Avcen Limited, London.

Posted by Industrial-Manufacturing at 12:59 AM | Comments (0)

QSI Offers Panel-Mount Version of the QTERM-G55 — Rugged Graphic Operator Interface

QSI Corporation, manufacturer of rugged operator interface terminals, announces the panel-mount version of the popular QTERM-G55 human-machine interface (HMI). The QTERM-G55 is a rugged, panel-mount HMI terminal using graphics and a keypad to interface with the user.

Salt Lake City, UT (PRWEB) April 28, 2005 -- QSI Corporation, manufacturer of rugged operator interface terminals, announces the panel-mount version of the popular QTERM-G55 human-machine interface (HMI). The panel-mount QTERM-G55 is the newest addition to QSI's family of award-winning Qlarity™ graphic terminals and is now available.

The QTERM-G55 is a rugged, panel-mount HMI terminal using graphics and a keypad to interface with the user. The terminal can be equipped with two EIA-232, -422 or -485 serial ports; Ethernet 10Base-T or a Power-over-Ethernet (IEEE 802.3af) interface. The QTERM-G55 has a 320x240 pixel, color LCD display measuring 96 mm (3.8") diagonal. (optional grayscale display available) and is viewable in most lighting conditions. Other industrial-grade features include 24-key or 40-key membrane / steel snap dome keypad with LEDs; 2 Mbytes flash / 16 Mbytes SDRAM; programmable speaker and real-time clock. The QTERM-G55 operator interface is ruggedized for use in harsh industrial environments (NEMA-4 pending, CE certified housing). The panel-mount terminal has an overmolded rubber boot, providing a superior seal, around an ABS polycarbonate plastic case. Terminal housing is available in blue, black or gray. The QTERM-G55 can be customized to be a part of your product with a custom key legend and company logo.

The QTERM-G55 operator interface uses an object-based graphic terminal programming language called Qlarity™ (pronounced Clarity). Designing a simple control panel interface or a complete stand-alone application has never been easier. The ability to use pre-defined objects, edit existing objects or author your own objects provides flexibility to the novice and expert alike. Qlarity Foundry™, a PC-based design tool, provides a Windows® environment for screen creation, application simulation, debugging and downloading to the QTERM-G55.

About QSI Corporation
Established in 1983, QSI Corporation is a manufacturer of rugged handheld, panel-mount and pedestal-mount terminals for industrial OEMs and commercial vehicle systems integrators. QSI’s human machine interface (HMI) and mobile data terminal (MDT) products include character and graphic terminals that are programmable, customizable, CE certified, and NEMA 4/12/13 rated. Numerous interfaces are available, including EIA-232, EIA-422, EIA-485, J1708, Ethernet and Power-over-Ethernet. Custom or semi-custom terminals withstand high levels of shock, vibration, humidity, and other environmental parameters. All QSI Corporation products are manufactured in the USA at the company's headquarters in Salt Lake City, Utah.

Graphic images of the QTERM-G55 can be downloaded from http://press.qsicorp.com. A QTERM-G55 data sheet can be downloaded at http://www.qsicorp.com/pdfs/data_sheets/qterm-g55-ds.pdf.

For more information contact:
QSI Corporation
801-466-8770
Fax 801-466-8792
Email e-mail protected from spam bots
www.qsicorp.com or www.qlarity.com

Posted by Industrial-Manufacturing at 12:59 AM | Comments (0)

CWC Gaming Implements TCSJOHNHUXLEY Roulette Wheel Analysis Solution

With action increasing daily on its live roulette games broadcast from its television studios in Costa Rica, CWC Gaming (www.cwcgaming.com) is pleased to announce that it has installed the TCSJOHNHUXLEY Roulette Wheel Analysis solution.

(PRWEB) April 28, 2005 -- With action increasing daily on its live roulette games broadcast from its television studios in Costa Rica, CWC Gaming (www.cwcgaming.com) is pleased to announce that it has installed the TCSJOHNHUXLEY Roulette Wheel Analysis solution.

This additional software and hardware solution, which compliments CWC Gaming’s existing monitoring systems, ensures that CWC Gaming’s roulette games are free from any type of wheel or dealer bias. The installation of the TCSJOHNHUXLEY reader head also eliminates the need for dealers to manually key game results, which translates to fewer dealer errors.

“We are thrilled to have worked with TCSJOHNHUXLEY on the implementation of their solution,” said Adam Anhang, CEO of CWC Gaming. “We pride ourselves on bringing the fairness of land-based casino games to the internet, so we could not have picked a better solution supplier than TCSJOHNHUXLEY, with its overwhelming market share and experience in the land based casino industry. We hope we have the chance to expand our relationship with them in the future.”

Commented Daniel Lindsay, Commercial Development Manager at TCSJOHNHUXLEY, “We are delighted to have worked with CWC Gaming on this project. Our efficient & robust reader head technology is one of a number of core products for which TCSJOHNHUXLEY is well known. This application of our proprietary equipment simply serves to reinforce our forward thinking commitment to the gaming industry which is developing on many new and exciting fronts including the internet.”

About the TCSJOHN HUXLEY Roulette Wheel Analysis Solution
The TCS Roulette Wheel Analysis System spots bias and trends before the player does. Casino management can now easily check the performance of any roulette wheel, anywhere and at any time. Winning number data is automatically and securely collected through the TCSJH Reader Head. The unique software program instantly converts data into various, easy to read, full colour pictorial reports, such as Individual Number Bias, Wheel Sector Bias, Performance Change, Spin Speed and Table Performance. Further information about the Roulette Wheel Analysis can be found at http://www.tcsjohnhuxley.com/products/TECHNICAL/TCSRouletteWheelAnalysis/en.

About TCSJOHNHUXLEY
TCSJOHNHUXLEY combines manufacturing excellence with proven innovation and product development. From hand crafted furniture to cutting edge technical equipment, every product is designed to perform, enhance the gaming experience, security and profit.

TCSJOHNHUXLEY has strategically based offices all over the world to provide personal service, after sales support and technical expertise. TCSJOHNHUXLEY currently has over 200 employees located in its head office, manufacturing and logistics facility in the UK, and 9 international regional offices.

About CWC Gaming
CWC Gaming (www.cwcgaming.com) is the leader in live online gaming software and services, and currently powers over 15 licensees. CWC Gaming brings the fairness and integrity of regulated, land-based casino games to the internet.

Contact Information:
Daniel Lindsay
e-mail protected from spam bots
TCSJOHNHUXLEY
+ 44 (0)20 7394 4032
http://www.tcsjohnhuxley.com

Adam Anhang
e-mail protected from spam bots
CWC Gaming Inc.
+506-290-8796
http://www.cwcgaming.com

Posted by Industrial-Manufacturing at 12:58 AM | Comments (0)

International Software Award, Sponsored by Microsoft and Pocket PC Magazine Germany, Honors SYWARE, Inc. With “Best Database Software Award 2004”

SYWARE, Inc., announced an international panel of industry experts honored SYWARE’s Visual CE software with Club Pocket PC’s “Best Database Software Award 2004”. The award was sponsored by Microsoft Germany and Pocket PC Magazine Germany. SYWARE mobilizes information between the enterprise and the field and rapidly converts paper-based or PC processes into mobile applications, without programming, that can be deployed on any Windows Mobile Pocket PC or Windows CE device.

Cambridge, MA (PRWEB) April 28, 2005 -- SYWARE, Inc., announced an international panel of industry experts honored SYWARE’s Visual CE software with Club Pocket PC’s “Best Database Software Award 2004”. The award was sponsored by Microsoft Germany and Pocket PC Magazine Germany. SYWARE mobilizes information between the enterprise and the field and rapidly converts paper-based or PC processes into mobile applications, without programming, that can be deployed on any Windows Mobile Pocket PC or Windows CE device.

Hundreds of companies from around the world submitted their products for review by a panel of international judges to determine the winners. The annual Club Pocket PC awards program identifies the best software and hardware products on the market for a global community of users. Other winners in the hardware category included T-Mobile’s MDA 2 for best Pocket PC of the year 2004 and Motorola’s Mpx 200 for best Smartphone of the year 2004. This item follows previous news where SYWARE announced the availability of mEnable 2.0, to provide mobile users with wireless access to enterprise data and run database applications on handhelds and connect to ODBC-enabled databases in real-time at any time or place. For more on mEnable, visit http://www.syware.com/lp/menable

“SYWARE is honored to receive Club Pocket PC’s Best Database Software Award 2004,” said Sy Danberg, President, SYWARE, Inc. “This award further validates our position as an international leader in the marketplace,” Danberg added. “Thousands of users voted for Visual CE at the Pocket PC Award 2004 to make Visual CE the number one product in the Best Database Software Category-- congratulations!” said Alex Januschewsky, Founder, Club Pocket PC Europe. For more information on Visual CE, visit http://www.syware.com/lp/visualce

About SYWARE, Inc.
SYWARE empowers mobile users to collect data and create feature-rich database applications that can be deployed on any Windows Mobile Pocket PC or Windows CE device- wherever they need to work. Industry or user-specific data can be downloaded, collected, displayed, modified and synchronized, without programming. SYWARE provides low cost of ownership, rapid deployment and return-on-investment without requiring users to expand IT departments to manage software and data between desktops and servers to devices. SYWARE removes obstacles to commerce and enables users to share data seamlessly over wireless, LAN, WAN or Internet connections in a wide variety of market sectors, including municipalities, healthcare, transportation, government, life sciences, financial services, manufacturing, automotive, energy, aerospace and other markets.

The cornerstone of SYWARE’s product line is Visual CE®, the award-winning database and forms development tool for Windows Mobile and Windows CE handhelds. A diverse, international panel of industry experts awarded SYWARE Pocket PC magazine’s “Best Software Award 2004” in the database category, as Visual CE is used by small-to-medium-sized businesses around the world- and trusted by FedEx (NYSE: FDX), ChevronTexaco Corp. (NYSE: CVX), Cargill, Inc., Coca-Cola (NYSE:KO), General Dynamics (NYSE: GD) and the U.S. Geological Survey. SYWARE is also the creator of mEnable®, a flexible software architecture for real-time wireless access to enterprise data located on corporate servers, and FoneDB®, the first database software for Microsoft Smartphone devices.

For media inquiries, contact Joe Romano, Partner, HighGround, Inc. at 781-279-1320 x 208 or e-mail protected from spam bots

Posted by Industrial-Manufacturing at 12:57 AM | Comments (0)

German Plastic Additive Giant Baerlocher Far East Awards ERP2 Solution Implementation Contract to Dignersys Consulting Bhd

YB Dato’ Kalsom Abdul Rahman, Chairman of Small and Medium Industries Development Corporation (SMIDEC) Witnesses Signing of Among the First ERP Provision Contracts by a Malaysian Solution Provider to a German Multinational

(PRWEB) April 28, 2005 -- Dignersys Consulting Bhd scored what is believed to be a first for a Malaysian enterprise resource planning 2nd generation (ERP2) provider in winning a contract to provide its EnterpriseBuilder solution to the Singapore and Malaysia operations of Baerlocher Far East, among the world’s leading plastics additives suppliers.

The contract signing between Baerlocher Far East and Dignersys was witnessed by YB Dato’ Kalsom Abdul Rahman, Chairman of Small and Medium Industries Development Corporation (SMIDEC, here today.

The contract estimated to be worth close to RM1Million is significant as it is believed to be the first agreement that an industry-leading German company has entered into with a Malaysian ERP2 solution company.

YB Dato’ Kalsom Abdul Rahman, Chairman of Small and Medium Industries Development Corporation (SMIDEC) said, “This is a notable achievement as it is a reversal of the traditional pattern of Malaysian companies buying foreign ERP2 solutions. Dignersys’s EnterpriseBuilder is among the few locally developed ERP2 solutions that have gained acceptance among multinational companies such as Baerlocher Far East.”

In 2004, Baerlocher Malaysia and Singapore achieved combined sales revenue totaling approximately RM100 million. Malaysia is also one of Baerlocher’s 13 international production sites.

She encouraged more Malaysian solutions providers to offer their services to multinational companies with operations in Malaysia as well as to explore foreign markets.

According to Mr. Pierre Toh, Chief Executive Officer of Dignersys Consulting Bhd, the company considers the contract win recognition of the international standard of its EnterpriseBuilder ERP2 solution and services, as well as an ideal starting point to capture more global business.

“This win is a milestone for us and for Malaysian ERP2 solution providers as it proves that locally developed solutions have reached international standards. Baerlocher is a worldwide leader in plastic additives and other players in the plastics industry will be keen to follow their lead,” Mr. Toh said. “Baerlocher’s confidence in our solution has put us in an even better position to offer our services to multinationals with operations in this region.”

The company’s EnterpriseBuilder solution has more than 80 modules including modules for the management of Demand-Chain Management Modules, Supply-Chain Management Modules, Production Control Modules, Materials Management Modules, Finance Modules, Accounting modules, SMS Modules, RFID Modules, POS Management Modules and Human Capital Management Modules. Baerlocher Far East will deploy 32 modules in Malaysia and 24 modules in Singapore.

Baerlocher Far East selected Dignersys EnterpriseBuilder solution over eight other ERP vendors as the product met Baerlocher Far East’s system requirements, was ROI in relation to the system’s features and functionality. The product’s ease of integration with other systems. Its experienced and dedicated team was also deciding factors said Baerlocher Far East, Managing Director, Mr. Malpaso Cheng.

“It became clear that Dignersys’ EnterpriseBuilder was the best software solution provider to offer the technology infrastructure we needed to help achieve our business objectives to enhance effectiveness, efficiency and real time decision making,” Mr. Cheng said. “This solution will help us optimize the deployment of human resources.”

He added that Baerlocher with 56 employees in Malaysia and 19 in Singapore places high value on employee productivity and requires timely information to support informed decision making and market responsiveness.

Dignersys Consulting Bhd clients include Asia File Corporation Bhd, Slumberland Singapore & Malaysia, SME Aerospace and Power Choice Sdn Bhd among others.

Note: ERP is short for enterprise resource planning, a business management system that integrates all facets of the business, including planning, manufacturing, sales, and marketing.

(Source: http://www.webopedia.com/)

Posted by Industrial-Manufacturing at 12:57 AM | Comments (0)

Engineer-to-Order ERP Selection

Engineer-to-Order ERP Selection

(PRWEB) April 28, 2005 -- Enterprise Resource Planning (ERP) systems offer great benefits to engineer-to-order (ETO) companies looking to increase productivity and decrease cost. According to TR Cutler, spokesperson for the ETO Institute, “These benefits come as a result of a successful implementation, but not every implementation is successful.” Cutler asserts that, “One reason some implementations are not successful is the selection of the wrong system.”

The ETO Institute has just published a white paper, “Why Do Companies Choose the Wrong System?” This document is written with engineer-to-order companies in mind. It highlights the problems facing ETO companies trying to find and evaluate a new ERP system. The while paper provides some time and simple steps companies can take to reduce the chances of making a critical mistake.

(www.etoinstitute.org)
Cutler, who authors regular columns for Industrial Connection magazine (www.industrialconnection.net) and InMFG magazine (www.inmfg.com) is looking for case study profiles of ETO manufacturing companies and their ERP experiences. “The good, the bad, the ugly. I want to know what ETO manufacturers think about the ERP selection process, what companies have served them well and which have not. This will provide an interesting profile for the members of the ETO Institute.”

The ETO Institute specifically highlights some of the problems ETO manufacturers face when searching for an ERP system. Go to www.etoinsititute.org and learn more. Registration is free of charge and more than a thousand ETO manufacturers are expected to join in 2005.

Thomas R. Cutler
ETO Institute
954-486-7562
www.etoinstitute.org
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 12:56 AM | Comments (0)

Manufacturing Software System E-Z-MRP Announces New Pricing and Product Structure

E-Z-MRP, the leading manufacturing software system for small manufacturers, announces that a new pricing and product structure is in effect.

(PRWEB) April 28, 2005 -- E-Z-MRP, the leading manufacturing software system for small manufacturers, announces that a new pricing and product structure is in effect as of April 15.

According to Rocky Smolin, founder of Beach Access Software, makers of E-Z-MRP, “We see a distinction between those small manufacturers with less than five hundred parts in material resource planning, and those with a need for unlimited part numbers.”

Smolin noted that some manufacturers will start with the under 500 parts version of E-Z-MRP, priced at $2,995, and grow into the new unlimited version, priced at $9,800. Beach Access Software credits the $2,995 for customers who later choose to upgrade. Other small manufacturers who presently have more than five hundred part will start right away with the E-Z-MRP Unlimited version.

To accommodate the new pricing structure, E-Z-MRP offers a leasing program that ensures a rapid Return-on-Investment.

*Lease E-Z-MRP with two full years of support for just $169.96 per month.
*Lease E-Z-MRP Unlimited with two full years of support for just $495.00 per month.

Small manufacturers with more than one hundred parts can no longer manage the manufacturing process on an Excel spreadsheet. Since more than 84 percent of all manufacturers have less than 50 employees, there is a remarkable opportunity for cost-effective manufacturing systems like E-Z-MRP. Despite the extensive media coverage regarding ERP (Enterprise Resource Planning), in most cases these small manufacturers do not require all the functionality offered, nor can many afford the price point.

Somewhere between Excel and ERP is the core process for most manufacturers. By offering the two versions of E-Z-MRP, no small manufacturer will be required to purchase more software than actually needed, while still having the ability to grow into the E-Z-MRP Unlimited version.

The EZ MRP package includes a full-featured Bill of Materials processor, plus a material planning and tracking module which tracks all sales orders, forecasts, work orders (planned, firm, and released), purchase orders, shortages, raw materials and finished goods inventories. It also records a complete audit trail on all inventory transactions. Also included is a physical inventory function and a purchase order module for printing purchase orders.

E-Z-MRP runs on any Windows-based PC or network, and requires Access 2000, Access XP or Access 2003 to run. No on-site or remote training is required. A comprehensive user manual with tutorials provides all the required instruction.

For more information, visit the company’s web site at www.e-z-mrp.com.

Contact:
Beach Access Software
Rocky Smolin
858-259-4334

Posted by Industrial-Manufacturing at 12:55 AM | Comments (0)

Online Fastener Store Offers Transparent Pricing (http://www.instockfasteners.com)

InStock Fasteners, an online transaction website selling standard fasteners (screws, nuts, bolts, etc.) to the industrial and construction markets, is now live. Not only does the company offer customers a very user-friendly site, but also transparent pricing across all purchase volumes - and notoriously low prices to boot.

Chicago, IL (PRWEB) April 28, 2005 -- A consortium of long-time hardware and component industry investors have launched InStock Fasteners (http://www.instockfasteners.com), an online store for small bulk and package-size standard industrial and building fasteners. The new, independent company offers a deep inventory of screws, nuts, bolts, washers, pins and related items, and a selection of over 20,000 SKUs. Product selection is tailored to serve the small manufacturer and job shop, building contractor, and MRO (Maintenance, Repair, & Operations) market segments. Fastener buyers will find a website with all prices published for all purchase volumes, a novel and noteworthy development in the fastener industry.

Additionally, they will find some of the lowest prices available in the marketplace. Visitors will enjoy a very convenient, easy-to-use website, designed to maximize user experience, and with tools to help the customer manage his procurement relationship with InStock Fasteners (http://www.instockfasteners.com). Customer service is available for assistance as well.

“InStock Fasteners will continue to expand its online tools, its online benefits to the customer, and its fastener product line”, states Robert Drew, Marketing Director. “Our goal is to be the low-price one-stop destination for all industrial, construction, and MRO buyers. With well over 100 years combined experience, our management team has the domain experience and track record to make this happen.”

InStock Fasteners will focus on the North American market initially, with a long-term goal of growing internationally. For more information, see the website (http://www.instockfasteners.com) or e-mail Robert Drew at e-mail protected from spam bots.

Posted by Industrial-Manufacturing at 12:55 AM | Comments (0)

$30 Billion Fluid Power Industry Validates LatchTool Group's Contention

The National Fluid Power Association petitions Government to fund development of compact and efficient hydraulics.

Colorado Springs, CO (PRWEB via PR Web Direct) April 27, 2005 -- The National Fluid Power Association announced last month that it had received a favorable response from the National Science Foundation for its proposed consortium of University Research Centers to develop compact and efficient fluid power.

The group comprised of prominent universities in close cooperation with the $30 billion fluid power industry seeks $18 million to fund research to integrate components into unified systems that will minimize the weight and volume of fluid power systems. They expect to expand fluid power from its current use for heavy equipment to portable and self-powered applications such as wearable tools and rescue robots.

Over the past nine years, the LatchTool Group has quietly pursued this quest for smaller, lighter, more affordable hydraulic systems that could be integrated into tools, prosthetics and a plethora of industrial and consumer products.

The Company introduced its technology at an American Society of Mechanical Engineers event last November where it showed its PowerCylinder™, a mechanical force amplifier that uses encapsulated hydraulic circuitry. The device weighs ounces, yet leverages pounds into tons. Last month, the PowerCylinder was picked a best product of 2004 by Design News, a Reed Business Information publication for mechanical and design engineers.

Monday, the LatchTool Group announced that it has integrated a simpler version of its encapsulated hydraulic circuitry directly into a locking type of pliers. For the first time, women, the elderly and infirmed can have the hand strength equal to a man's. The prospects for miniaturized compact hydraulics are huge, just as the LatchTool Group contends, and now the NFPA and its more than 400 members assert.

LatchTool has multiple patents both issued and pending that covers its developments in valves, hydraulic circuitry and systems integration. The Company has offered to make its PowerCylinders available to the proposed consortium should the NSF decide to go ahead with the funding proposal.

Contact:
Sean Fry
LatchTool Group
719-360-0977
e-mail protected from spam bots
www.latchtool.com

Posted by Industrial-Manufacturing at 12:54 AM | Comments (0)

Glass Artisans Provide Custom Glass Etching

On-Site Systems Glass Etching, an experienced etching company, employs the latest technology and the most talented glass artisans to create sophisticated and elegant custom glass etching for commercial, residential, and government buildings.

(PRWEB) April 27, 2005 -- On-Site Systems Glass Etching, one of the largest and most experienced etching companies in the Southeast, employs some of the most talented glass artisans and utilizes the latest technology and techniques to create custom glass etching projects for commercial, residential, and government buildings.

By utilizing specialized glass etching techniques and proprietary glass etching equipment, On-Site Systems Glass Etching is able to perform their etched glass work on the job site, without the mess and dust normally associated with sandblasting. Their custom glass etching projects can be completed in practically any environment, including office interiors, residential interiors, airplanes, automobiles, motor homes, boats, and more.

“We’re known, well-known, for being able to handle custom glass etching projects as small as one piece to as large as thousands of pieces, as well as for getting difficult and sometimes unimaginable projects from the idea through the completion stage,” said Gary Taylor, Project Coordinator of On-Site Systems Glass Etching.

Some glass etching clients at On-Site Systems include:
• Coca-Cola
• Delta Airlines
• Cingular Wireless
• Home Depot
• McDonalds
• Disney

In addition to custom glass etching designs, On-Site Systems Glass Etching also does stone carving, fiberboard, and graphic films to create standard or custom designs. To view the online photo gallery of some of their finest work or to learn more about their custom glass etching services, visit www.On-SiteSystems.com.

About On-Site Systems Glass Etching
On-Site Systems Glass Etching was founded over 20 years ago in a small building by two brothers, Richard and Michael Lindeborg. Now, they have a 10,000 square-foot glass etching facility, a staff of talented artisans, and are hailed as one of the finest custom etching services in the Southeast.

Posted by Industrial-Manufacturing at 12:53 AM | Comments (0)

Doe Run Partners with Local Universities for Global Student Exchange Project

Students travel to Doe Run Peru to gain international experience and lend fresh perspectives on operations.

St. Louis, MO (PRWEB via PR Web Direct) April 27, 2005 -- The Doe Run Company recently embarked on an innovative cross-cultural educational program known as the Global Student Exchange Project with the University of Missouri, Rolla (UMR). Doe Run's unique position as a global leader in metallurgy gave UMR exchange students an opportunity to gain practical experience on an international level.

From March 27 through April 4, six UMR mining and civil engineering students traveled abroad to tour Doe Run Peru facilities and conduct field assessments of the company's La Oroya smelter and Cobriza mines. Doe Run provided housing accommodations for the students at the company's facilities in Peru, round-trip airfare, meals and in-country travel expenses. Later this year, Doe Run will welcome a group of Peruvian exchange students to its Southeast Missouri Mining and Milling Division (SEMO) in Viburnum, Mo. Not only will the trip help fulfill educational requirements, but it will also give the students an international advantage as they pursue mining education at Peruvian universities.

In addition to observing Doe Run Peru's mining and smelting operations, the multinational team will also study Doe Run's latest environmental innovations and community involvement in Peru. Upon completion of the project, expected late 2005, UMR students with their Peruvian counterparts will present Doe Run with a detailed report, including considerations for improving Doe Run Peru's efficiency and operations.

"This is a wonderful opportunity that allows our students to put their mining, metallurgical and environmental knowledge to work," said Jerry Tien, associate professor of mining and engineering studies at UMR. "Our students were interested to learn about Doe Run’s operations and were amazed to see their commitment to safety and community development. We're excited to apply our knowledge in these areas and determine if we can help Doe Run further improve its operations."

Doe Run Peru has invested more than $140 million on facility and environmental improvements since purchasing the Peruvian smelter from the government-run Centromin in 1997. The company continues to implement community programs in Peru, including those that support education, agriculture, health, sanitation and community sustainability. Meanwhile, the plant continues to work to reduce plant emissions, which are at historic lows.

"We're constantly looking for ways to improve our facilities, and this opportunity allows us a unique chance to get several fresh perspectives," said Bob Roscoe, co-general manager at SEMO and Doe Run's Cobriza Mine. "We’re excited to participate in a project that has the potential to enhance our facilities, while at the same time enabling students to gain the vital experience they'll need to compete at a global level. We've worked with UMR on several occasions and we're delighted to share our expertise with them to educate the next generation of metallurgists and mine engineers."

The Doe Run Company, along with its subsidiaries, is a privately held natural resource company
focused on environmentally sound mineral production, recycling and metals fabrication. Based in St. Louis, the company and its subsidiaries serve as North America's largest integrated lead producer and third-largest total lead producer worldwide, employing more than 4,000 people. The company and its employees are committed to keeping its operations and communities clean and safe while producing essential raw materials – lead, zinc, copper, gold and silver – that are needed for everyday life. Doe Run and its subsidiaries have U.S. operations in Missouri, Washington and Arizona, and South American operations in Peru. For more information, visit http://www.doerun.com.

Editor's Note: A photo of the UMR students in Peru is available in JPG format. Please contact Kristin Saunders at ksaunders @ standingpr.com or (314) 469-3500 for the file.

Contact:
Christi Dixon
e-mail protected from spam bots
314-469-3500
http://www.doerun.com

Posted by Industrial-Manufacturing at 12:53 AM | Comments (0)

Ellsworth Adhesives Presented with Supplier of the Year Award

Ellsworth Adhesives Specialty Chemical Distribution has been named the Lean Initiative award winner for 2005 by Rockwell Collins.

Cedar Rapids, IA (PRWEB via PR Web Direct) April 26, 2005 -- Ellsworth Adhesives Specialty Chemical Distribution has been named the Lean Initiative award winner for 2005 by Rockwell Collins. The award was presented by Chairman, President and CEO Clay Jones during the Annual Supplier Conference.

The Supplier of the Year award is an acknowledgement of significant contributions made during the year by suppliers and is based upon quality delivery, total cost of ownership, lead time and customer service.

Rockwell Collins is a leader in the design, production and support of communications and aviation electronics solutions for government and commercial customers worldwide.

Ellsworth Adhesives, Germantown, Wisconsin, USA, is North America’s largest distributor of adhesive products and equipment. Ellsworth Adhesives is a value added supplier of adhesives, sealants, coatings, encapsulants, tapes, releases and lubricants from leading international manufacturers like Dow Corning, Dymax, Lord, 3M, Loctite, Bostik, Permabond, Emerson & Cuming, Techcon and many others.

Ellsworth Adhesives has developed a reputation in the industry for providing the unusual combination of excellence in distribution as well as the most comprehensive level of technical expertise available. In addition to 46 locations in the US, they have a growing international presence, which now includes operations in Canada, Mexico, Belgium, Scotland, Sweden, Italy, Spain, Germany, Poland, Hong Kong and China.

For more information on Ellsworth Adhesives, please call 800-888-0698.

Contact Information:
Nyla Burns
Ellsworth Corporation
262-509-8711
http://www.ellsworth.com

Posted by Industrial-Manufacturing at 12:52 AM | Comments (0)

Hosted Document Management Services Prove Cost Effective for Businesses with Limited IT Resources.

WorldView’s Document Management Services Reduce Upfront Investment Costs and Implementation Time while Streamlining Business Processes.

Omaha, NB (PRWEB) April 27, 2005 -- Keeping the costs and maintenance of information systems to a minimum is a challenge for businesses operating on limited IT resources. WorldView Ltd. is helping to control these costs and maintenance issues by offering a hosted web-enabled document management solution. Its Enterprise Content Management (ECM) solution offers document management, storage, retrieval and distribution – all the features of a robust in-house model, for a fraction of the price.

Updated in March 2005, WorldView’s new browser interface is an intuitive, user-friendly way to allow employees to collaborate and manage important business documents. The hosted ECM package offers multiple features including: Automated workflow processes, version control with check-in/check-out functionality and user privileges, electronic forms, email integration, exception reporting, and the ability to retrieve documents with keyword searching and cross-referencing. The web-enabled system allows worldwide remote access from any PC with Internet connection.

“Our hosted document management model offers businesses a practical, easy-to-implement solution to control the rising costs of information systems within the office,” says Tom Hassenstab, WorldView president. “Many of our customers are seeing a return on investment in less than one year.”

WorldView utilizes a secure off-site document data center, equipped with state-of-the-art firewalls, intrusion detection systems and data encryption, all working in unison to provide a seamless hosted document service.

The WorldView ECM solution is a combined solution that includes service, support and tailored solutions to meet the needs of any business. Certified Installation and Support Specialists provide custom integration and installation services to satisfy any unique requirements a business may need. The ECM solution is implemented quickly, easily and cost-effectively and because it’s a hosted product, there is no need for software upgrades or maintenance.

“Information is an organization’s most valuable resource,” says Hassenstab. “WorldView’s services offer businesses the ability to gain efficiencies in the workplace by better managing their information. Our hosted document management services allow businesses the opportunity to do this without having to make a large upfront investment or consume their technical staff’s valuable time throughout the year – two major drawbacks of an in-house system.”

ABOUT WORLDVIEW LTD:
WorldView Ltd. is an Internet based document management service provider offering secure, hosted enterprise solutions that enable organizations to store, manage and share vital information between employees, vendors, partners and customers. Each month, over a million documents are stored by more than 800 business professionals across North America, using WorldView's document management service. For more information, visit http://www.worldviewltd.com .

CONTACT INFORMATION:
Jay Buroker
Marketing Manager
WorldView Ltd.
402-330-0210

Posted by Industrial-Manufacturing at 12:51 AM | Comments (0)

DDL Testing Services Demystifies Complex Package Validation Process - Shares Advice with Medical Device Manufacturers at Medcon 2005

DDL Inc., a leading package, product and material testing laboratory, will be presenting “Demystifying Medical Device Package Validation” at the Medcon 2005 Conference, April 27–28.

San Diego, CA (PRWEB) April 27, 2005 - http://www.testedandproven.com - Scott Levy, Package Engineer at DDL Inc., a leading package, product and material testing laboratory, will be presenting “Demystifying Medical Device Package Validation” at the Medcon 2005 Conference, April 27–28, Del Mar Fairgrounds Activity Center, San Diego, CA.

Demystifying Medical Device Package Validation is intended to help medical device manufacturers understand complex package validation processes, along with what it takes to satisfy regulatory requirements regarding sterile medical device packaging.

“Many medical device manufacturers struggle on a daily basis with what they need to do to set up a shelf-life package validation,” said Levy. “Many are unaware of how to satisfy industry standards such as ISO 11607.”

According to the ISO 11607 standard, the manufacturer “must ensure the product and package system combine to create a total product which performs efficiently, safely, and effectively in the hands of the user.”

Levy will answer ten frequently asked questions regarding the medical device package validation process, including which industry standards the package should adhere to and what each manufacturer should do to ensure the satisfaction of these requirements.

Levy will also share how DDL is helping manufacturers comply with ISO 11607 (Clause 7) via its PackReview service.

Join Scott Levy for “Demystifying Medical Device Package Validation”
Wednesday, April 27, 2005, at 11am - Bing Crosby Hall, Del Mar Fairgrounds Activity Center, San Diego, CA

For more information on complex package validation processes and the PackReview service, stop by the DDL booth #59 at Medcon or visit http://www.testedandproven.com/packreview.html

About DDL
DDL offers expert testing services that provide excellent documentation for package testing, material testing, product testing and HazMat testing. DDL package testing clients find peace of mind with the DDL reliable PackReview (SM) ISO 11607 clause 7 certification. DDL maintains full service testing labs in Minnesota and California.

Contact DDL at: http://www.TestedAndProven.com or call Scott Levy at 952-941-9226 ext.115.

Posted by Industrial-Manufacturing at 12:50 AM | Comments (0)

Lovejoy Releases Expanded Full-Line Catalogue, CD-ROM

New Products, Demonstrations and Training Sessions Fill Daily Reference Tools

(PRWEB) April 27, 2005 -- “Coming soon to DVD!” hypes the release of a first-run movie for the public’s at-home viewing pleasure. This month, a new CD-ROM is hitting the mailboxes of plant service managers in the U.S. and Canada and the unlikely star is the power transmission coupling, a common yet essential component for the smooth operation of any facility.

Lovejoy, Inc., is releasing the updated, expanded version of its full-line catalogue with an accompanying CD-ROM to create an invaluable reference tool for engineers, planners and maintenance supervisors. The CD-ROM expands the catalogue offerings by including training, demonstration and application videos that lend a visual hand to the operator who needs to install or replace a coupling.

Specifically, new products included in the 2005 edition of the Lovejoy, Inc., product catalogue include:
- An expanded grid section to include new 1000 Series fully interchangeable grid-style coupling specifications, sizes and application suggestions;
- Case studies for various key industries such as power or paper;
- Application photos to illustrate common uses for power transmission couplings in industrial settings;
- ROSTA section updates that include the new AB and AB-D product lines;
- A new section on the shaft-locking device introduced by Lovejoy in 2004;
- And installation instructions for the Jaw, Jaw-in-Shear and S-Flex couplings.

Lovejoy first introduced the full line catalogue in CD-ROM format in 2003. Each year, the company enhances the value of the CD-ROM with essential tools and visual guidelines designed to help plant service managers perform their jobs more efficiently and easily.
This year, new in the CD-ROM catalogue is:
- English/German metric CJ Series catalogues
- English/German metric Torsional catalogues
- Shaft Locking Device application stories and user guide
- The Coupling Configurator demonstration/training video, which explains the process of sizing and configuring a coupling online at the Lovejoy Web site
- Jaw-In-Shear installation video
- Disc coupling installation video
- ROSTA AB mount comparison video
- ROSTA AB mount demonstration video
- ROSTA AU on Shaker Conveyor video
- Industry Connect Power Point presentations and cost comparisons for two key industries including power and aggregate
- And a U.S. list price book.

Both print catalogue and CD-ROM versions utilize multiple drawings, photos and specifications to make it easy to determine the right type of coupling for any application.

To receive a copy of the new Lovejoy, Inc., full-line catalogue and CD-ROM, detailing the many solution-engineered products available from Lovejoy, interested parties should visit the Web site at www.lovejoy-inc.com. Founded in 1900, Lovejoy enjoys an international reputation as the leading company specializing in flexible coupling design and development. Lovejoy products are available worldwide through distributors in North America and 55 other countries, supported by Lovejoy offices and support staff in Canada, Europe and the USA. Lovejoy, Inc. is certified under the ISO-9001:2000 International Standards for Quality Management.

Lovejoy, Inc., corporate offices are at 2655 Wisconsin Ave., Downers Grove, IL, 60515, USA. Phone 630-852-0500; fax 630-852-2120; e-mail inquiries e-mail protected from spam bots.

Posted by Industrial-Manufacturing at 12:50 AM | Comments (0)

LogiXML Simplifies Distribution of Free LGX Report for Partners

New OEM licensing package allows developers to embed LGX Report within applications, eliminating the need for separate download and installation of the free LGX Report

McLean, VA (PRWEB) April 27, 2005 -- LogiXML (www.logixml.com) today announces a simplified process for OEM licensing that enables software solutions providers to deploy the company’s popular free reporting product, LGX Report, embedded as part of their solutions.

“Partners are deploying LGX Report in a variety of innovative applications and have contacted us to suggest ways to use LGX Report as an embedded reporting component of their applications and host or deploy the solution in a seamless manner,” said Linda Höwe, Vice President of Business Development at LogiXML. “The new Distribution Pack is our solution based on that input. It is a “no hassle” way for solutions providers to host or deploy LGX Report Server embedded within their web based solutions. “

The popularity of the free LGX Report (www.freereporting.com), which LogiXML launched in July 2004, has resulted in tens of thousands of developers downloading and using the product. LogiXML is committed to continue offering free reporting and the LGX Report Distribution Pack streamlines the integration, licensing and distribution of LGX Report with partner's web applications.

The LGX Report Distribution Pack is OEM licensing that allows solution providers and developers to embed the reporting tool within their application – eliminating the need for their clients to download and install the reporting tool separately. The Distribution Pack includes the PDF export add-on (which is an optional add-on for free LGX Report) and can be deployed on web servers with any number of processors. Pricing of the LGX Report Distribution Pack starts at $1,000 for distributing LGX Report to a total of 100 processors on the production web servers.

In addition to LGX Report, LogiXML offers a complete set of report development products for web based reporting that can be used as a powerful managed report development platform including LGX Report Plus and LGX Info. The company also offers the powerful LGX Ad Hoc Report Builder product for end user driven report development via a browser.

Built on XML technology, the LGX Report Development Platform lets developers create full-featured web-based reports using a drag and drop user interface. The platform allows developers to connect with web services and all major (or ODBC and OLEDB compliant) databases such as Oracle, SQL Server, DB2, Sybase, MySQL, etc., and can be deployed across any .NET architecture.

About LogiXML, Inc.
LogiXML builds powerful web based Business Intelligence reporting and analytics products that are easy to learn, use, deploy and maintain. Our products help organizations make better, timelier decisions by transforming disparate data into critical business information.

LogiXML's growing base of customers includes leading organizations in Telecommunications, Life Sciences, Finance, Logistics, Education, Computer Hardware and Software, Retail, Non-Profit and Government. LogiXML stands as a leading provider of pure web based BI products, providing a complete and unique set of easy to use, XML-based reporting solutions accessible through a standard web browser.

For more information about LogiXML and the LGX suite of products, please contact:
Partner Programs
Linda Höwe VP of Business Development, LogiXML
703.748.0020 ext 150,
e-mail protected from spam bots.
www.logixml.com.
Marketing and Public Relations
LogiXML
401 330-0385
e-mail protected from spam bots
www.logixml.com

Posted by Industrial-Manufacturing at 12:49 AM | Comments (0)

INC Magazine Spotlights PC-Doctor in "Best Cities" List

Maker of diagnostics software for PCs is highlighted as Reno company is highlighted in article that ranks Reno as No. 1 best city for doing business

Reno, NV (PRWEB) April 27, 2005 -- PC Doctor Inc., the leading global developer of hardware diagnostic and system information tools, is highlighted in the May 2005 issue of Inc magazine, a leading U.S. business magazine that delivers advice, tools and services to help business owners and CEOs start, run and grow their businesses.

The article is part of the magazine’s annual “Best Places to Do Business” list, which ranked Reno as No. 1 of 272 cities across America. The issue was scheduled to be available on newsstands nationally last Monday.

“Writer Joel Kotkin’s article underscores many of the business benefits that we’ve experienced since we moved to Reno,” said Aki Korhonen, PC-Doctor president and chief technology officer. “The lower cost of doing business goes a long way in helping us to remain competitive in the U.S. software industry. We’re creating jobs in an industry that increasingly is sending them overseas.”

PC-Doctor relocated to Reno in October 2003 from Emeryville, Calif. -- a city on the banks of San Francisco Bay where it had been located since its founding in the early 1990s. In addition to the lower cost of doing business, the article also details the lower cost of living for the company’s employees. “Many of our people are finding it possible to purchase homes and to have the option of being a single-income family – something that was out of reach in the Bay Area,” said Korhonen, who founded the company.

About PC-Doctor
Founded in 1993, PC-Doctor Inc. is the leading provider of PC hardware diagnostic, customer support and manufacturing tools to top PC makers, service centers and IT organizations worldwide. Acknowledged by leading PC manufacturers as the de facto standard for diagnostics, PC-Doctor has shipped more than 100 million units worldwide. Its products are available in 11 languages for Windows and Linux operating systems, which run on leading Intel and AMD microprocessors.

For more information about PC-Doctor and its products, visit www.pc-doctor.com. To place an order from within the U.S. and Canada, call toll-free (866) 289-7237. From outside the U.S., please call (775) 336-4000. The company’s headquarters is located at 9805 Double R Blvd. Reno, NV 89521.

©2005 PC-Doctor, Inc. PC-Doctor is a trademark of PC-Doctor, Inc., Reno, NV. ALL RIGHTS RESERVED. All other brand and product names are registered trademarks, trademarks or servicemarks of their respective holders and are gratefully acknowledged.

Posted by Industrial-Manufacturing at 12:48 AM | Comments (0)

Lighting Expert Cautions Landscape Lighting Professionals Against Premature Use of LED’s.

Landscape lighting expert, David Beausoleil, issued a public statement today drawing attention to the industry’s latest innovation, Light Emitting Diodes (LED’s). His concern is that landscape lighting professionals will begin replacing industry-standard incandescent and halogen lamps with LED’s before these new lamps have been standardized and proven.

(PRWEB) April 27, 2005 -- Landscape lighting expert, David Beausoleil, issued a public statement today drawing attention to the industry’s latest innovation, Light Emitting Diodes (LED’s). His concern is that landscape lighting professionals will begin replacing industry-standard incandescent and halogen lamps with LED’s before these new lamps have been standardized and proven.

Mr. Beausoleil, an instructor at Rutgers University and founder of Cast Lighting, expresses his concern, “While LED lamps have great potential as an energy efficient, long-lasting light source in outdoor lighting applications, there are many problems with models currently available. The main issues are heat build-up, poor color rendition, undeveloped optics and a lack of quality standards. These new lamps have been rushed to market before all the bugs have been worked out. Landscape lighting professionals that use LED’s are risking their reputations since the lamps may not perform as desired and prematurely burn out.”

LED’s are miniature electronic lamps used for many years as indicator lights in computers and electrical devices. Their small size, long life and energy efficiency make them ideal for these applications. Recent research has broadened their use to include bright light sources in flashlights, street signs and brake lights on cars. Since individual LED’s are relatively dim, they are grouped in bundles to achieve a greater intensity of light. These new higher-output devices have pushed the limits of the technology and have yet to make significant inroads as dependable bright light sources in architectural lighting.

Despite the early stage of development, LED products dominated the recent Light Fair Conference held in New York City. This yearly industry event is the largest forum of lighting manufacturers in the world. LED versions of all commonly used incandescent lamps were found in many booths – most of them from Asian companies. In contrast to these offerings, LED researchers in pre-conference workshops explained in great detail the manufacturing obstacles that have yet to be overcome. Their best-guess estimate for when LED’s would be ready as bright light sources was 2 to 3 years.

Emphasizing the need for caution, Mr Beausoleil stated, “The early years of landscape lighting were plagued by poorly manufactured products. Because of this, lighting systems were failing prematurely and reputations were damaged. It’s taken many years for our industry to mature and for the products to reach a high level of quality. Lamp quality is especially important; my company, Cast Lighting, offers over 30 models of lamps, each of them precisely manufactured to achieve the patterns and intensities essential for the palette of the landscape lighting designer. When LED’s reach this level of sophistication, then we will offer them, too – but that’s a few years down the road.”

About David Beausoleil
David Beausoleil, Founder and President of Cast Lighting, LLC., is widely recognized as a leading authority on Landscape Lighting design and installation. He founded Cast Lighting with the intention of providing the highest quality products and training at prices affordable to the small business owner. Through his courses at Rutgers and hands-on trainings conducted across the country, thousands of landscape professionals, designers and architects have launched landscape lighting businesses. Information about Cast Lighting can be found at www.cast-lighting.com.

Posted by Industrial-Manufacturing at 12:47 AM | Comments (0)

Longmont LifeScience Thursday to Be Held May 12; Panel Will Discuss Investigational New Drug (IND) Applications & Issues

The Colorado BioScience Association (CBSA) will host Longmont LifeScience Thursday on May 12 from 3:30 p.m. until 6:00 p.m.at the Radisson Conference Center in Longmont, at 1900 Ken Pratt Blvd. The event will feature a panel discussion on "Investigational New Drug (IND) Applications & Issues" by a group of experts.

Longmont, CO (PRWEB) April 27, 2005 -- The Colorado BioScience Association (CBSA) will host Longmont LifeScience Thursday on May 12 from 3:30 p.m. until 6:00 p.m.at the Radisson Conference Center in Longmont, at 1900 Ken Pratt Blvd. The event will feature a panel discussion on "Investigational New Drug (IND) Applications & Issues" by a group of experts.

Panel members will include Dr. Ali Said Faqi, MPI Research, Inc., Mr. Bruce Feistner, OSI Pharmaceuticals and Dr. Dorothy Colagiovanni, Replidyne, Inc., with another panel member to be added. Dr. Colagiovanni will also act as moderator. Panelists will discuss pre-clinical, regulatory and clinical issues, as well as stumbling blocks.

CBSA members may attend at no cost. Non-member admission is $50, and a student discount is available.

Longmont LifeScience Thursday, held each quarter, began in 2003, and is designed to provide information and networking opportunities for those interested in the life science industry, including those involved or interested in biotechnology, medical devices, ag biotech, pharmaceuticals, research institutions and life science industries. The Longmont Area Economic Council is a founding sponsor of the event and John Cody, LAEC President, serves on the CBSA Program Committee. Denise Brown, Executive Director of CBSA, has been instrumental in developing new programs for the Association and raising its profile in Colorado.

This program is sponsored by the Longmont Area Economic Council and Pratt Management.

About the Longmont Area Economic Council
The Longmont Area Economic Council exists for the sole purpose of keeping the Longmont area economy strong. This is accomplished specifically by "actively supporting the creation and preservation of quality primary jobs." Primary employers are those who sell the majority of their goods and services outside the region. LAEC is a public/private partnership, governed by a Board of Directors made up of representatives from primary employers, the City of Longmont, and the business community at large. For more information, call (303) 651-0128, email e-mail protected from spam bots, or visit www.longmont.org.

About the Colorado BioScience Assocation
The Colorado BioScience Association is a not-for-profit corporation providing services and support for Colorado’s growing biosciences industry. Colorado is embarking on an aggressive plan to grow the state’s bioscience industry into one of the country’s premier bioscience clusters. CBSA enjoys the support of over 200 member organizations representing a range of bioscience companies dedicated to solving problems and developing products as well as companies providing key services to the bioscience industry and research institutions. CBSA works closely with the state and local policy makers to represent the interests of the bioscience industry. A critical component for Colorado to become one of the country’s top bioscience clusters is a supportive legislative and regulatory environment. The Colorado BioScience Association actively works to achieve these results. For more information, call 720-859-4153, email e-mail protected from spam bots, or visit www.cobioscience.com.

Speaker Bios
Dr. Ali Said Faqi, Director of Developmental & Reproductive Toxicology at MPI Research in Kalamazoo, Michigan. Before joining MPI Research he was a senior Scientist at IITRI in Chicago, Illinois and Allergan Pharmaceuticals in Irvine, California. Dr. Faqi is also an adjunct Professor at the University Palermo, Italy. Dr. Faqi received his DVM degree from the Somali National University in Mogadishu, Somalia and Diploma of Specialization in Experimental Pharmacology at University of Milan in Italy. He received his PhD from the University of Leipzig in Germany. He worked as a Postdoctoral Fellow/Research Scientist at the Free University of Berlin, in Germany, Thomas Jefferson University in Philadelphia and Morehouse School of medicine in Atlanta.

Mr. Bruce Feistner, Regulatory Affairs Manager at OSI Pharmaceuticals. He joined NeXagen Pharmaceuticals in 1993 and has worked through the various permutations of the Boulder company as it evolved from NeXagen to NeXstar Pharmaceuticals to Gilead Sciences and finally OSI Pharmaceuticals. During that period Mr. Feistner has worked primarily with oncology drug products and has witnessed the transformation from traditional chemotherapeutics to targeted therapies. He is responsible for preparing and/or overseeing regulatory submissions for investigational and commercial products on a global basis.

Dr. Dorothy Colagiovanni, novel antibiotic development toxicologist, Replidyne, Inc. Prior to working at Replidyne, she was a Research Investigator at OSI Pharmaceuticals where she was involved with development of targeted cancer therapeutics and managed the toxicology group which conducted GLP compliant studies for regulatory submissions. She has also worked for Amgen in the area of immunotoxicology assessment of novel proteins and at Gilead Sciences in the Anti-Infectives Division. Dr. Colagiovanni attended the University of Vermont and completed a Bachelor of Science degree in Medical Technology. Her graduate training took place at the University of Colorado Health Sciences Center where she earned a doctorate in Molecular Toxicology. She is board certified as a Diplomate of the American Board of Toxicology and has written numerous toxicology documents to support IND submissions and Investigator’s Brochures.

Posted by Industrial-Manufacturing at 12:46 AM | Comments (0)

ETO ERP Encompix Now Includes Configurator

ETO ERP Encompix now includes Configurator

(PRWEB) April 27, 2005 -- Encompix ETO ERP software leader based in Cincinnati, OH, announced the inclusion of the proprietary ETO Configurator as part of the company’s product suite. The ETO Configurator is based on Configure One’s concept product and is specifically design for engineer-to-order manufacturers.

Unlike most project configurators that can handle only simple configuration challenges, the ETO Configurator can handle the very complex product rules normally associated with engineer-to-order, project-based, or custom manufacturers.

Roger Meloy, Marketing Director with Encompix, note, “The ETO Configurator dramatically reduces the time it takes to go from a customer’s initial request for a quote to when the product is actually shipped by streamlining and automating much of the pre-manufacturing process. This includes the creation of quotes, sales and production drawings, routings, and bill of material (BOM.) The data is seamlessly integrated with other Encompix components and is used to create a routing and a complete indented BOM in Emcompix.”

According the Eric Binning at Encompix, “By automating sales and engineering tasks the Encompix ETO Configurator helps speed up response to quotation requests, free up engineering personnel, decrease errors and rework, and reduce overall lead time.”

Encompix (www.encompix.com) has filled the manufacturing software requirements of Engineer-to-Order companies since 1992. The company name reflects our commitment to developing business application solutions that encompass the complex areas of project-based and job-based manufacturing.

Encompix provides ETO manufacturers with a competitive advantage by improving bottom line results.

Posted by Industrial-Manufacturing at 12:45 AM | Comments (0)

Breeding Proactive Suppliers Defines Lean e-Kanban

Breeding Proactive Suppliers Defines Lean e-Kanban

(PRWEB) April 27, 2005 -- According to Sam Bayer, President of Datacraft Solutions (www.datacraftsolutions.com). “Kanban implies partnership. Both parties have a responsibility to share information and strive towards process improvement. Sounds great in theory but how do you enable it in practice? Share real time “actionable” information between both parties.” This level of e-kanban Lean efficiency is achievable.

Fax Kanban is not Efficient and not Lean

At ten minutes per fax, someone is spending 3.5 hours per day in administration time. That inefficiency results in less time to utilize more suppliers or improve the relationships with existing suppliers.

Furthermore, even if 99% of those faxes are trouble free procurement signals, four faxes per month are going to be problematic and dilute the entire rationale for a lean manufacturing operation. Suppliers claim they did not receive the fax kanban; suppliers cannot make the shipment date requested and expedited shipping fees are incurred, or worse, there will be a stockout which will negatively impact customer service levels.

Datacraft Solutions
www.datacraftsolutions.com
Sam Bayer
e-mail protected from spam bots
919-667-9804

Posted by Industrial-Manufacturing at 12:45 AM | Comments (0)

Small Manufacturers Two Leasing Manufacturing Software Leader Beach Access

Small Manufacturers Two Leasing Manufacturing Software Leader Beach Access

(PRWEB) April 27, 2005 -- E-Z-MRP, the leading manufacturing software system for small manufacturers, announced effective April 15th, there will be a new pricing and product structure. According to Rocky Smolin, founder of Beach Access Software, makers of E-Z-MRP, “We see a distinction between those small manufacturers with less than five hundred parts in material resource planning, and those with a need for unlimited part numbers.”

Smolin noted that some manufacturers will start with the under 500 parts version of E-Z-MRP, priced at $2995, and grow into the new unlimited version, priced at $9800. Beach Access Software credits the $2995 for customers who later choose to upgrade. Other small manufacturers who presently have more than five hundred part will start right away with the E-Z-MRP Unlimited version.

To accommodate the new pricing structure E-Z-MRP offers a Leasing program that ensure a rapid Return-on-Investment.

•Lease E-Z-MRP with two full years of support for just $169.96 per month.
•Lease E-Z-MRP Unlimited with two full years of support for just $495.00 per month.

For more information visit the company’s web site: http://www.e-z-mrp.com, or call 858-259-4334.

Small manufacturers with more than one hundred parts can no longer manage the manufacturing process on an Excel spreadsheet. Since more than 84% of all manufacturers have less than fifty employees, there is a remarkable opportunity for cost-effective manufacturing systems like E-Z-MRP. Despite the extensive media coverage regarding ERP (Enterprise Resource Planning), in most cases these small manufacturers do not require all the functionality offered, nor can many afford the price point.

Somewhere between Excel and ERP is the core process for most manufacturers. By offering the two versions of E-Z-MRP, no small manufacturer will be required to purchase more software than actually needed, while still having the ability to grow into the E-Z-MRP Unlimited version.

The EZ MRP package includes a full-featured Bill of Materials processor, plus a material planning and tracking module which tracks all sales orders, forecasts, work orders (planned, firm, and released), purchase orders, shortages, raw materials and finished goods inventories. It also records a complete audit trail on all inventory transactions. Also included is a physical inventory function and a purchase order module for printing purchase orders.

E-Z-MRP runs on any Windows-based PC or network, and requires only Access 2000, Access XP, or Access 2003 to run. No on-site or remote training is required. A comprehensive user manual with tutorials provides all the required instruction.

Beach Access Software
Rocky Smolin
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 12:44 AM | Comments (0)

Noted Futurist and Management Consultant Peter G. Balbus to Speak on "Ownable Distinction" at M.I.T. Enterprise Forum

M.I.T. panel discussion will focus on creating "ownable distinction" – a compelling new strategic concept for achieving and sustaining business growth.

Chicago, IL (PRWEB via PR Web Direct) April 7, 2005 – The Massachusetts Institute of Technology Enterprise Forum Chicago Chapter announced today that Peter G. Balbus will speak at its next symposium entitled "Ownable Distinction: The Key to Driving Sustained Growth." The event will be held on April 20 at the Chicago offices of Gardner Carton & Douglas LLP, 191 N. Wacker Drive, Chicago, IL. Registration and networking begins at 5pm; the program starts at 6pm.

Ownable Distinction is a compelling new business concept that is helping companies achieve sustained growth from their intellectual property, product and service lines, tangible assets and strategic alliances. It directly addresses the question "How can executives prevent their businesses from becoming commoditized?"

Mr. Balbus is a recognized futurist and management consultant who assists Fortune 1000 executives in creating ownable distinction for their companies. He is the founder and managing director of Pragmaxis LLC, a consulting group that helps clients define and execute profitable growth strategies. Prior to founding Pragmaxis, Mr. Balbus held senior practitioner and practice management positions with Booz Allen & Hamilton, CSC Index and KPMG Strategic Services. Mr. Balbus was also the on-air host of "The Information Age," an FNN cable-TV program focusing on the business implications of emerging technologies.

Other members of the panel include:

Darren S. Cahr – Partner with the Chicago office of Gardner Carton & Douglas LLP, specializing in helping clients to identify, protect and exploit their full range of intellectual capital.

Michael M. Geoffrey – Chief Intellectual Property Counsel for USG Corporation, responsible for intellectual property matters of the corporation and its subsidiaries worldwide.

Darcy Evon, Executive Director, Corporate Relations & Interprofessional Business Development at Illinois Institute of Technology, will serve as moderator for the event.

About Pragmaxis

Pragmaxis LLC provides high-impact management consulting and advisory services to executives responsible for driving business growth – especially through the pragmatic development and execution of technology- and intellectual property-driven business strategies.

The firm’s concentration areas include creating ownable distinction, integrated business & technology strategy, indirect sales strategy and marketing automation, and technology commercialization. www.pragmaxis.com

About The MIT Enterprise Forum

The MIT Enterprise Forum is a non-profit organization that promotes the formation and growth of innovative and technologically oriented companies through a series of specialized executive education programs. Through these programs, the Forum provides networking, leadership opportunities, and provocative new ideas to senior business leaders while showcasing MIT's role in entrepreneurship in communities around the world. The Enterprise Forum was formed in 1978 and has 25 chapter organizations worldwide. Participation and membership is open to the general public.

www.mitefchicago.org

Posted by Industrial-Manufacturing at 12:42 AM | Comments (0)

M.I.T. Enterprise Forum of Chicago Delves Beyond Intellectual Property into ‘Ownable Distinction’

M.I.T. panel discussion focuses on creating "ownable distinction" – a compelling new strategic concept for achieving and sustaining business growth.

Chicago, IL (PRWEB) April 26, 2005 -- While the topic of intellectual property (IP) is often talked about and largely misunderstood, a company’s IP is only half the battle in carving out market command, according to a local panel of IP experts. A compelling new notion called “ownable distinction”, which is being used as a powerful business tool to fully leverage corporate IP, was debated last week at the April gathering of the MIT Enterprise Forum of Chicago.

In reality, IP is a poorly understood “legal fiction,” according to Darren Cahr, a partner with the Chicago office of Gardner Carton & Douglas LLP and one of three MIT Enterprise Forum panelists. An intangible asset, a company’s intellectual property is nothing more than a “piece of paper saying you have a right to defend it,” Cahr said.

On the other hand, applying the concepts of ownable distinction (OD) to its intellectual property is how a company gains and holds a strong position in the market. With OD, a company has the ability to ultimately create a market in which it is the undisputed leader.

“It’s not enough to have a clever brand or a unique technology. IP is irrelevant without OD,” Cahr said. “IP has little value unless it’s on a strategic vector taking you in a direction. With OD, you must choose and know that direction. IP without OD is like a car without a steering wheel.” He added: “IP is a hammer. It’s not a pot of gold. It’s a tool that needs a goal.”

Companies often have lots of IP of different kinds floating around the organization without a clear executive understanding of what it is, where it is and what business applications it can best serve. A notion emanating from a combination of business, legal and branding strategy, OD is grounded in the context of the market’s dynamics and its customers -- and done correctly, OD is a force that helps prevent commoditization.

"With 75 percent of today’s companies not knowing what their IP is worth and 80 percent of the value of U.S. companies locked up in their IP, the need for IP to be thought of differently is more pressing now than ever before," Cahr said. Added Pragmaxis LLC founder and fellow panelist Peter Balbus: “Businesses today face essentially two choices: commodify your competition or be commoditized yourself. OD is the antidote to commoditization.”

For OD to become a reality within a company, it must receive top-down support and be driven with “intentionality,” Balbus said. “It must directly address the question of where a company’s IP stands in the context of the market and its future direction.” Balbus, a recently elected MIT Enterprise Forum board member, cited hockey legend Wayne Gretzky as being great because he skated to where the puck was going rather than where it was.

One obvious example of solid OD is the Apple iPod. While consumers can buy competing products that are at least as advanced technically, Apple has built and branded an immersive experience around the device and consumers have responded overwhelmingly. Other notable examples of successful OD include the Volkswagen Beetle, Starbucks and the Motorola Razr.

On the flip side, various companies have been innovative with their IP but failed to follow up with solid OD. You may recall the Sony Betamax from 1975, the original Radio Shack laptop in 1983 or the Motorola “brick phone,” which spawned an entirely new cellular telecommunications industry before market leadership was captured by Nokia.

On a humorous note, Balbus highlighted examples of other trinkets which were innovative but lacked clear ownable distinction, including an alarm clock on wheels that hides until its user finds it and a toilet paper dispenser worn on a person’s head for convenience in blowing the wearer's runny nose.

About the MIT Enterprise Forum of Chicago
The MIT Enterprise Forum is a non-profit organization that promotes the formation and growth of innovative and technologically oriented companies through a series of specialized executive education programs. Through these programs, the Forum provides networking, leadership opportunities, and provocative new ideas to senior business leaders while showcasing MIT's role in entrepreneurship in communities around the world. The Enterprise Forum was formed in 1978 and has 25 chapter organizations worldwide. Participation and membership is open to the general public.

www.mitefchicago.org

Posted by Industrial-Manufacturing at 12:42 AM | Comments (0)

April 26, 2005

New Industrial Training Solution Offered to Customers in Most Major US Cities

Business Industrial Network announces they now offer over 150 training locations in most major US cities to hold their customized industrial training classes at . The New Service will be launched at the St. Louis location (“The Microsoft Building”), with the June PLC Training Seminar.

St. Louis, MO (PRWEB) April 26, 2005 -- Business Industrial Network (BIN) reports they have been negotiating a deal with a major property owner since the end of 2004. Today they announced training locations in most major US cities, to offer their industrial maintenance and engineering customers yet a third training option. In the past, training customers had two options, on-site training or fly their employees to seminar locations. Now they have a third training solution, “Near Site Training”, as dubbed by BIN.

Business Industrial Network President, Don Fitchett explains it best... “During the last decade of training here at BIN, I have witnessed time and again, customers sacrificing quality for cost savings. Unfortunately with today’s highly competitive budgets, they did not have a choice, until now. On site training of maintenance, engineering and management is often plagued with interruptions and make-shift training facilities.”

Don: “With the cost of air fares now days, companies can not afford to send all the employees who need the training to another state for a seminar. With maintenance, engineering and management employees being crucial to the normal operation of a facility, some executive management find it difficult to let their people travel too far away.”

Don: “The solution, 'Near Site' training facilities. A traveling training bus? No, we could not fit all the industrial equipment and computers for the hands on training in any mobile training solution. Also we could not maintain the lowest prices in the industry if we had to invest in over 150 properties, so we negotiated a deal with a major existing property owner.”

Business Industrial Network's customers can drive to the nearest training location and return home every night just like their normal work schedule. The local facility will be set up specifically for the training with the latest technology and AV equipment. An example of the new training facilities is the one located in the 'Microsoft Building', which is being spotlighted with the BIN PLC Troubleshooting Seminar June 20, 2005.

For additional information about Business Industrial Network and the new locations, please see http://www.bin95.com/about.htm

For additional information about the June PLC Training Seminar, please see http://www.bin95.com/St-Louis_PLC_Training.htm

About Business Industrial Network:
Delivers world class onsite engineering and maintenance training, specializing in Allen Bradley equipment. BIN is partnered with Industrial Training Inc. (http://www.IndustrialTrainingInc.com) to offer it’s customers a complete training solution covering mechanical, electrical and management training topics. Feed Forward Publications (http://www.FeedForward.com.au) develops and sells industrial training products and is a subsidiary of Business Industrial Network.

Contact:
Don Fitchett
Business Industrial Network
573-547-5630
http://www.BIN95.com

All trademarks and trade names are property of their respective owners. We are in no way affiliated with Allen Bradley and do not promote any vendors during our training seminars.

Posted by Industrial-Manufacturing at 07:07 AM | Comments (0)

Electrophysics® Unveils Breakthrough Thermography Camera Highlighted by Cutting Edge Industrial Design

HotShot combines high performance and best in class ergonomic design in a cost-effective line of thermographic cameras.

Fairfield, NJ (PRWEB) April 26, 2005 -- Focused on developing innovative infrared imaging cameras, Electrophysics is proud to introduce HotShot. HotShot represents a paradigm shift in thermography camera design and is an entirely new concept in industrial inspection data collection. HotShot is the world’s first thermography camera with an advanced ergonomic design, integrated data logger functionality and icon-based user interface. The camera was designed specifically for industrial inspection of high voltage electrical systems, production machinery and buildings. HotShot features a unique articulating thermal camera head that enables framing of electrical and mechanical systems from floor level to overhead while maintaining an optimal viewing angle and hand position, even when operating in tight spaces.

HotShot integrates a high performance microbolometer infrared sensor that delivers sharp, highly sensitive thermal images. It’s easy-to-use joystick control and 3.5” LCD touch screen with on screen control buttons, facilitates the identification of inspection point locations, incident information and observation details that can later be automatically incorporated into reports. A Compact Flash accessory port provides an industry standard interface for a wide range of existing and future accessory devices including a visible camera, CF memory cards, a WiFi card and a miniature hands-free viewfinder. The USB port and active sync provides an easy method for downloading data to a computer.

“During the early phases of our product development, we interviewed a large number of thermography camera users to learn what they wanted in a next generation camera. Responses were centered around making the user interface more intuitive and automating the methods of getting field information into reports,” said Chris Alicandro, Director of Sales for Electrophysics. “While a number of companies have focused on point-and-shoot cameras without the capability of data entry in the field, Electrophysics focused on a design that incorporated data capture routines and a tightly integrated report generation software program. Users also stated that they wanted much lighter weight systems that they could operate for longer periods of time on a single battery charge. Weighing less than 1.8 lbs and featuring a low-power design that will run for 4 hours on a single charge, the HotShot delivers a high level of power in a very lightweight housing,” concluded Alicandro.

Several HotShot models are available featuring application-specific software, extended object temperature ranges, as well as accessories, including both wide angle and telephoto optics. The base model features a temperature range from –20° to 350°C with +2% accuracy and an IP-54 environmental rating. The HotShot is also designed for field upgrades and customers will be able to upload new software as new features are added.

Headquartered in Fairfield, New Jersey, Electrophysics develops advanced thermal imaging, near infrared and night vision systems for use in a host of imaging applications. Since 1969, Electrophysics has maintained its focus on delivering products that reflect the company’s exceptional engineering capabilities to meet specific real world demands while keeping pace with rapidly evolving imaging technologies. The Company has realized exceptional growth as a result of its customer-centric philosophy and remains firmly committed to continually innovating its products in order to enhance the experience of end-users. Electrophysics is vertically integrated with expertise in complex signal processing, optics, embedded software, PC software applications development and hardware design.

For additional information and full specifications, please visit the HotShot product page at www.electrophysics.com

Posted by Industrial-Manufacturing at 07:06 AM | Comments (0)

Sciemetric's SigLEAK™ Test System Delivers Highest Gage R&R and Fastest Cycle Time

The SigLEAK™ is an out-of-the-box leak test system. Unlike other leak test systems, the SigLEAK™ utilizes Sciemetric’s advanced signature analysis technology for leak detection. This leads to better gage R&R, decreased cycle time and fewer false rejects.

(PRWEB) April 26, 2005 -- Sciemetric®, the premier provider of defect detection, analysis and traceability solutions for manufacturers, is pleased to announce the release of the SigLEAK™ Test System. This leak test system is ideally suited for detecting leaks and testing seal integrity during the assembly of automotive components, medical devices and electronic parts. The SigLEAK™ Test System is available in many different configurations including pressure decay, differential pressure and mass flow.

The SigLEAK™ Test System uses Sciemetric’s proprietary signature analysis software to capture and analyze complete leak test waveforms in real time. Using all the data points on the waveform leads to increased accuracy and better Gage R&R (repeatability and reproducibility) than competitive leak test systems that rely solely on the initial and final pressure levels. The industry leading Gage R&R of the SigLEAK™ Test System minimizes false rejects and improves manufacturer efficiency and yield.

With the signature analysis technology of the SigLEAK™ Test System it is possible to visualize and identify the key elements of the leak test for a specific product. Instead of collecting and analyzing the complete waveform, individual zone testing can be performed on specific key features which results in reduced cycle time. Unlike traditional leak test systems that need to wait for the final pressure level reading, the SigLEAK™ Test System relies on the values from key features and compares these against acceptable limits to determine pass or fail status.

“The SigLEAK™ Test System solves two common problems of traditional leak test systems by providing better gage R&R and faster cycle time” said Nathan Sheaff, President and CEO of Sciemetric Instruments Inc.

The SigLEAK™ Test System is now available to customers.

About Sciemetric® Instruments
Sciemetric is the premier provider of defect detection, analysis and traceability solutions for manufacturers. We are shaping the future of efficient, high quality manufacturing.

Our solutions deliver the insight manufacturers require to improve quality, increase productivity and decrease costs across the entire production lifecycle.

Sciemetric customers are leading manufacturing companies in the automotive, industrial, medical, electronics and other sectors. Customers who have implemented Sciemetric solutions to help them achieve their quality and productivity objectives include Ford, General Motors, Behr, DaimlerChrysler, BMW, Toyota, Cummins, Delphi, John Deere, Caterpillar, Mazda, Hyundai, Visteon, Holden, International, Saturn, Medtronic and Hewlett Packard.

More information can be found on the company’s web site at www.sciemetric.com.

Posted by Industrial-Manufacturing at 07:06 AM | Comments (0)

Reva Night Operations Systems Introduces New Generation of Products

New RI-2200 HID Searchlight and Visi-Flare™ SL Portable Safety System answer the mission-critical needs of the customer.

Reno, NV (PRWEB) April 26, 2005 -- Reva Night Operations Systems (N.O.S) announces the launch of the new RI-2200 HID Searchlight and the next generation in flare technology, the Visi-Flare SL Portable Safety System.

“Our expertise and commitment to innovation with respect to customer needs will allow us to further strengthen our ability to provide high-intensity lighting solutions to the armed forces and other markets,” commented Markus Frick, Chief Executive Officer, Reva International, Ltd.

The RI-2200 HID Searchlight
The RI-2200 HID Searchlight’s compact, waterproof design offers the versatility needed for any night operations situation including hand-held use along with weapon-mounted configurations. Boasting 2200 lumen (at 6000K), the system can easily illuminate targets past ¾ of a mile making it the most powerful compact searchlight in the world.

“Because the products we manufacture are safety related, and the lives of those who use them depend on their capability, it is important for us to provide lighting solutions with the customer in mind,” stated Frick. “The RI-2200 is the next step in HID Searchlight technology for Reva. The system provides many innovative features making it the most versatile handheld searchlight available.”

The Visi-Flare SL Portable Safety System
The Visi-Flare SL family of Portable Safety Systems is Reva’s most unique platform introduced into the digital flare market to date. The SL has moved the system capability to the next level by having each flare in the system communicate directly with one another and flash in sequence. The SL system is also IR capable providing the end user with the ability to operate in covert situations. With visibility up to two miles the Visi-Flare SL is the most versatile strike flare alternative in the world.

“The system’s ability to communicate and create its own sequencing flash pattern is truly revolutionary,” said Rick Melillo, Director of Domestic Sales, Reva N.O.S. “The versatility of the product is unparalleled. It can be used for roadside checkpoints, landing zone operations, or even traffic control.”

Reva Night Operations Systems (www.revaNOS.com), based in Reno, NV, is the world’s leading developer, producer and supplier of high-intensity illumination technology for U.S. and allied military forces as well as Federal, state and local law enforcement. The company also offers illumination products for commercial applications, such as utility companies and the Department of Transportation.

Reva International, Ltd. (www.revainternational.com), an FMG Company, is a privately-held organization specializing in the design and manufacture of exclusive technology for government agencies and professional users worldwide. Embracing the benefits of strategic alliances, Reva International also works with partners on an OEM basis to continually develop and introduce a wide range of innovative products to the global marketplace.

Posted by Industrial-Manufacturing at 07:05 AM | Comments (0)

B&K Corporation Selects Encompix ETO ERP

B&K Corporation has two Michigan manufacturing plants, one in Fenton and one in Saginaw.

Cincinnati, OH (PRWEB) April 26, 2005 -- B&K Corporation has two Michigan manufacturing plants, one in Fenton and one in Saginaw. The company founded in 1952 recently transformed their technology process by implementing ETO (Engineer-to-Order) ERP (Enterprise Resource Planning) Leader Encompix, based in Cincinnati, OH.

Kurt Kuck, CFO for B&K shared some of the operational challenges the company faced on a daily basis prior to the Encompix implementation. Kuck noted, “We are a special order business. Every order we get is different in some regard, but many of our machines have some commonality to them. Our tendency was that when we received a new order, we had not simplified method of identifying what we could use from previous orders. That approach just added to the cost. What was needed was some standardization.”

Kuck also on the lack of efficiency in the old Syteline system from Symix (now Infor Global Systems). “Syteline was fine for tracking material and labor costs. But what was lacking was the capability to bring it all together into a job cost system that we could use for percentage of completion.”

Kuck noted they did not have a real time system. It was a very paper intensive system. The company would go into monthly job cost meetings that lasted hours and with three inch books of paper with all project budget recaps. The Syteline data was three weeks old.

Encompix benefits after just six months made a dramatic difference according to Kuck: “By eliminating the manual input that resulted from maintaining duel systems, B&K dramatically decreased our clerical time. This has made out month-end process much more streamlined and efficient. Encompix give us vastly improved information. We are able to see the exact status of all our projects. How we go into those meetings and we just pull everything up onto the screen and enter job notes right into the system. It is much more of a real-time system.”

Encompix (www.encompix.com) has filled the manufacturing software requirements of Engineer-to-Order companies since 1992. The company name reflects our commitment to developing business application solutions that encompass the complex areas of project-based and job-based manufacturing.

Encompix provides ETO manufacturers with a competitive advantage by improving bottom line results.

Posted by Industrial-Manufacturing at 07:04 AM | Comments (0)

Internal Supermarket Consumption Signals Replenishment Key To Lean Manufacturing via E-Kanban

The use of supermarkets is a kanban best practice. They insure steady availability of material to consuming cells, albeit at a cost of maintaining some inventory buffer. But how do supermarkets stay stocked at the minimum inventory levels? Manufacturers, like DJ Orthopedics has linked the supermarket electronically to internal suppliers in their machine shop. This level of e-kanban Lean efficiency is accomplished through Signum, the product of Datacraft Solutions (www.datacraftsolutions.com).

(PRWEB) April 26, 2005 -- Internal SuperMarket Consumption Signals Replenishment:
The use of supermarkets is a kanban best practice. They insure steady availability of material to consuming cells, albeit at a cost of maintaining some inventory buffer. But how do supermarkets stay stocked at the minimum inventory levels? Manufacturers, like DJ Orthopedics has linked the supermarket electronically to internal suppliers in their machine shop. This level of e-kanban Lean efficiency is accomplished through Signum, the product of Datacraft Solutions (www.datacraftsolutions.com).

Fax Kanban is Not Efficient and Not Lean

At ten minutes per fax, someone is spending 3.5 hours per day in administration time. That inefficiency results in less time to utilize more suppliers or improve the relationships with existing suppliers.

Furthermore, even if 99% of those faxes are trouble free procurement signals, four faxes per month are going to be problematic and dilute the entire rationale for a lean manufacturing operation. Suppliers claim they did not receive the fax kanban; suppliers cannot make the shipment date requested and expedited shipping fees are incurred, or worse, there will be a stockout which will negatively impact customer service levels.

Datacraft Solutions
www.datacraftsolutions.com
Sam Bayer
e-mail protected from spam bots
919-667-9804

Posted by Industrial-Manufacturing at 07:04 AM | Comments (0)

Small Manufacturers Two Leasing Manufacturing Software Leader E-Z-MRP

Small Manufacturers Two Leasing Manufacturing Software Leader E-Z-MRP

(PRWEB) April 26, 2005 -- E-Z-MRP, the leading manufacturing software system for small manufacturers, announced effective April 15th, there will be a new pricing and product structure. According to Rocky Smolin, founder of Beach Access Software, makers of E-Z-MRP, “We see a distinction between those small manufacturers with less than five hundred parts in material resource planning, and those with a need for unlimited part numbers.”

Smolin noted that some manufacturers will start with the under 500 parts version of E-Z-MRP, priced at $2995, and grow into the new unlimited version, priced at $9800. Beach Access Software credits the $2995 for customers who later choose to upgrade. Other small manufacturers who presently have more than five hundred part will start right away with the E-Z-MRP Unlimited version.

To accommodate the new pricing structure E-Z-MRP offers a Leasing program that ensure a rapid Return-on-Investment.

•Lease E-Z-MRP with two full years of support for just $169.96 per month.
•Lease E-Z-MRP Unlimited with two full years of support for just $495.00 per month.

For more information visit the company’s web site: http://www.e-z-mrp.com, or call 858-259-4334.

Small manufacturers with more than one hundred parts can no longer manage the manufacturing process on an Excel spreadsheet. Since more than 84% of all manufacturers have less than fifty employees, there is a remarkable opportunity for cost-effective manufacturing systems like E-Z-MRP. Despite the extensive media coverage regarding ERP (Enterprise Resource Planning), in most cases these small manufacturers do not require all the functionality offered, nor can many afford the price point.

Somewhere between Excel and ERP is the core process for most manufacturers. By offering the two versions of E-Z-MRP, no small manufacturer will be required to purchase more software than actually needed, while still having the ability to grow into the E-Z-MRP Unlimited version.

The EZ MRP package includes a full-featured Bill of Materials processor, plus a material planning and tracking module which tracks all sales orders, forecasts, work orders (planned, firm, and released), purchase orders, shortages, raw materials and finished goods inventories. It also records a complete audit trail on all inventory transactions. Also included is a physical inventory function and a purchase order module for printing purchase orders.

E-Z-MRP runs on any Windows-based PC or network, and requires only Access 2000, Access XP, or Access 2003 to run. No on-site or remote training is required. A comprehensive user manual with tutorials provides all the required instruction.

Beach Access Software
Rocky Smolin
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 07:03 AM | Comments (0)

PRONTO North America Marketing Director Verzi Thrilled to Have Smedley and Cutler at Users Conference

PRONTO North America Marketing Director Verzi Thrilled to Have Smedley and Cutler at Users Conference

(PRWEB) April 26, 2005 -- Wednesday, May 4th, Thomas R. Cutler, CEO of TR Cutler, Inc., author of the Manufacturers Public Relations and Media Guide, Associate Editor of Industrial Connection, and Contributing Editor to InMFG magazine will be addressing the first annual PRONTO North America Users Conference. Cutler is also the founder of the Manufacturing Media Consortium, a group of 2000 journalists writing about various aspects of manufacturing and industrial trends.

Peggy Smedley is the editor of Start Magazine and will also address the PRONTO North America Users Conference on Thursday, May 5th. Smedley was recently profiled in the Wall Street Journal and authored Mending Manufacturing, How America Can Manufacture its Survival. She is an award-winning journalist.

Tom Verzi, Director of Marketing for PRONTO North America, expressed his delight with both speakers, “We are thrilled to have both Peggy Smedley and TR Cutler address our first PRONTO North America Users Conference. Both are distinguished journalists in the manufacturing sector and will provide great insight to our customers.”

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the manufacturing, service, and distribution ERP leader.

Tom Verzi
PRONTO ERP
952-942-5858
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 07:03 AM | Comments (0)

LatchTool Designs a Pair of Pliers that Levels the Playing Field

Gives women, the elderly and infirmed the hand strength of a weightlifter.

Colorado Springs, CO (PRWEB via PR Web Direct) April 25, 2005 -- Late last year, LatchTool introduced its PowerCylinder™, a mechanical force amplifier that leverages pounds into tons. Its sophisticated three-speed system uses encapsulated hydraulic circuitry to multiply an input force 60 fold. Design News, a magazine for design engineers, picked the PowerCylinder a best product of the year for 2004.

Now the Company has integrated a simpler version of its encapsulated hydraulic circuitry right into a pair of pliers. Roughly 70 years ago, Christian Peterson invented what was to become the Vise-Grip®, pliers with a mechanical system that once tripped allow the tool to stay latched on to whatever it has grasped. It takes substantial hand strength to set a Vise-Grip® type locking pliers; even more to release its hold. Now comes the LatchTool invention where a 30-pound squeeze can deliver nearly triple the clamping force of a locking pliers. And even better, a push of a button releases its grasp.

For some idea of relative strengths, a man's grip averages 50 pounds, a woman's 30 pounds. With LatchTool's new PowerPliers™, a 15-pound grip will deliver the same force a man can deliver with a conventional locking pliers. The Company has patented its technology and is now seeking venture partners to manufacture and market their PowerPliers™.

Contact:
Bob McPherson
LatchTool Group
Colorado Springs, CO
719-488-8800
www.latchtool.com

Posted by Industrial-Manufacturing at 07:02 AM | Comments (0)

April 25, 2005

Romar Studios, Inc. Announces Management Team in Charge of the Debbie Siebers Brand

Nationally acclaimed marketing & creative firm, Romar Studios, Inc. has a hit brand on its hands. Chairman credits a strong management team, hot products, and the universal appeal of health & fitness guru Debbie Siebers as the reasons behind its success.

Los Angeles, CA (PRWEB) April 25, 2005 -- Romar Studios, Inc. today announced the management team responsible for the successful launch of the Debbie Siebers brand and its official web site, www.DebbieSiebers.com. The lineup includes Chairman Don Polk, General Manager Queen Udofia, Creative Director Thomas Moon, Marketing Director Jeffery “Julien” Price and brand partners Kerry Gordy and Debbie Siebers.

“My diverse management team at Romar Studios, Inc. represents the very best of talent in multiple disciplines,” explains Polk. “Its members make it possible for the Debbie Siebers brand to be the recipient of unmatched skills and creative capabilities. The team represents a microcosm of America, both culturally and in the way we think.”

Chairman Polk brings 26 years of experience in the apparel & manufacturing industries to the brand. He owns a BS in psychology & a BA in Public Relations, both from Boston University. He is a national SCF trustee with the NAACP, a corporate round table member with the National Black Caucus of State Legislatures, and a national board member with the Rainbow/PUSH Coalition.

The one-two punch of Gordy and Siebers adds significant value to the brand. A successful former executive with Mowtown Records and Paisley Park Studios, Gordy partnered with Romar Studios, Inc. & health and fitness guru Siebers, of FOX Television’s hit reality show, “The Swan,” because, “This team has the synergy to take America by storm with a great product offering and brand.”
Having joined the company in 2001, Udofia recently joined the management team as its general manager. She has a long history of hard work, as evidenced by graduating summa cum laude from UCLA with a triple major in aerospace science, philosophy, and African-American studies.

Creative Director Moon, who joined the team in 2005, brings with him eight years of experience and a degree in studio & visual arts from the University of California. Price, the Marketing Director, also came aboard in 2005. He contributes his eight years of experience, along with a psychology education from Loyola Marymount University in Los Angeles and a marketing certification through UCLA Extension to the brand.

According to Polk, “Debbie Siebers’ collections were designed to not only be sportswear, but also to fit a consumer’s need to own multifunctional clothing that would also be suitable for the beach, or just to wear out for a night of dancing.”

Based in Los Angeles, Romar Studios, Inc. is the largest African-American owned apparel and manufacturing firm in the country. It was honored as number 38 on the minority-owned business list by Black Enterprises in 2004. The online home for the Debbie Siebers brand may be found at www.DebbieSiebers.com.

For more information contact:

Jeffery “Julien” Price
Marketing Director
Romar Studios, Inc.
(213) 621-4409
www.DebbieSiebers.com

Posted by Industrial-Manufacturing at 05:20 AM | Comments (0)

Barcoding Inc. on Seventh Annual ICIC – Inc. Magazine Inner City 100

Barcoding Inc. is ranked 11th on the list of the fastest growing inner-city companies in America

Boston, MA (PRWEB) April 25, 2005 -- Today, the 2005 ICIC-Inc Magazine Inner City 100 were released, and Barcoding Inc. is ranked 11th on the list of the fastest growing inner-city companies in America.

The list, a ranking of 100 of the fastest-growing businesses in inner city areas around the country, reveals that virtually all of these companies are profitable and planning to expand their workforces. The 2005 Inner City 100 showed an astounding CAGR of 63 percent and an average annual growth of 827 percent between 1999 and 2003, compared with an average of 716 percent for all companies appearing on the Inner City 100 since its inception in 1999. This year’s list was culled from more than 4,500 nominations in 150 cities. These companies have created almost 9,600 new jobs in the past five years.

Merrill Lynch, the international financial management and business advisory services company, returns for the 3rd year as national sponsor of the program.

"Our partnership with ICIC and sponsorship of this year's Inner City 100 event gives Merrill Lynch a unique opportunity to recognize and support the vitality, creativity and leadership of these fast growing inner city companies," says John C. Minter, Jr., First Vice President and National Sales Director, Merrill Lynch Business Financial Services. "These companies embody the very best of American business."

Fifty-eight cities are represented on the final list. Chicago, Detroit and Denver have the most winners with five apiece. The list represents the leading edge of a new approach to America’s urban revitalization – one that relies not on charity but on the competitive advantages of inner cities. The Initiative for a Competitive Inner City (ICIC) has been studying the economic condition of the largest 100 American cities and is working to revitalize inner cities across the country.

The 2005 Inner City 100 winners are attending the Inner City 100 Summit in Boston for a two-day event featuring seminars for Inner City 100 owners and managers at Harvard Business School, a reception at Fenway Park, and culminating in a gala awards dinner, where more than 1,000 guests are expected.

“Despite perceptions to the contrary, our research and work has continually shown that locating all or part of one’s business in an inner city gives you inherent advantages – from workforce diversity and availability to proximity to transportation nodes and downtown,” said Michael E. Porter, a Harvard Business School professor who founded ICIC in 1994. “By choosing to grow businesses in America’s inner cities, the owners of these businesses are transforming urban landscapes across the nation.”

Highlights of the 2005 Inner City 100 list include:

* Thirty-one percent of the companies on the list are minority-owned (compared with 11 percent nationally) and 18 percent are owned by women;
* Twenty-nine percent said recruiting qualified employees was one of the top factors limiting growth;
* When it came to raising capital, 45 percent of companies reported some difficulty in doing so. In turn, 89 percent used personal assets to start their business;
* Forty percent of company employees live in the inner city, including 38 percent of all “rank and file” employees and 10 percent of all senior management;
* Seventy-two percent of companies lease their location, rather than own;
* The average age of a CEO at the time their company was founded was 34; 53 percent of all CEOs have completed at least four years of college; and 78 percent live or have lived in an inner city;
* On average, CEOs owned 62 percent of their companies, while outside investors averaged 10 percent ownership

The record number of nominations received this year was largely due to the Inner City 100 National Program Sponsor Merrill Lynch and nominating partners such as U.S. Conference of Mayors, New America Alliance, National Women’s Business Council, and National Association of Manufacturers.

“We have learned from the Inner City 100 CEOs and employees that success is more certain when you reverse thinking from addressing deficits in the community to building upon its assets,” said Dorothy A. Terrell, president and CEO of ICIC. “Our partnership with Merrill Lynch will significantly enhance ICIC's capacity to find and celebrate the impact of the company’s success on the neighborhoods where it does business.”

Editor’s note
The Inner City 100 winners are based in 58 cities. Inner City 100 companies were selected from a pool of over 4,500 new nominations including 500 from Merrill Lynch and 600 from Mayors’ offices. These companies were nominated from 150 cities compared. Criteria for the award include having at least 51 percent of operations located in economically distressed urban areas; having sales of at least $150,000 in 1999 and at least $1 million in 2003. Average annual sales for the 100 companies in 2003 was in excess of $21 million. Collectively, sales totaled more than $2.2 billion.

About Initiative for a Competitive Inner City
The Initiative for a Competitive Inner City (ICIC) is a national not-for-profit organization founded in 1994 by Harvard Business School professor Michael E. Porter to promote a market-based approach and cutting-edge solutions for inner-city revitalization. ICIC’s mission is to build healthy economies in America’s inner cities that create jobs, income, and wealth for local residents.
We act to transform thinking, provide cities with a new vision of economic development, and engage the resources of the private sector to accelerate inner-city business growth.
For more information, please visit our web site at http://www.icic.org/.

About Inc
Inc is the leading magazine written for the men and women who own and manage small-to-mid-sized, fast-growing companies. Published 12 times a year, Inc helps its 1.5 million readers by providing expert advice and practical solutions as they face the opportunities, pitfalls, and rewards of growing a company. inc.com (www.inc.com), the Web site for growing companies, was named Best Online Magazine by Folio and Best Overall New Publication (all media) by the Computer Press Association.

About Merrill Lynch
Merrill Lynch is one of the world's leading financial management and advisory companies, with offices in 36 countries and total client assets of approximately $1.1 trillion. As an investment bank, it is a leading global underwriter of debt and equity securities and strategic advisor to corporations, governments, institutions and individuals worldwide. Through Merrill Lynch Investment Managers, the company is one of the world's largest managers of financial assets. For more information on Merrill Lynch, please visit http://www.ml.com/.

About Barcoding Inc.
Barcoding Inc. helps business and government organizations deploy supply chain technology, including bar code scanners, wireless terminals, mobile computers, RFID systems, and related software. Clients include manufacturing, distribution, healthcare and warehousing companies, and many state, local and federal agencies. Based in Baltimore, Maryland, Barcoding has North American offices in Virginia, Pennsylvania, Georgia, Florida, California, Colorado, Connecticut and Illinois. European sales and customer service are handled through an office in the Netherlands. Please visit http://www.barcoding.com/ for additional information.

Contacts

For more information about the 2005 Inner City 100 list contact Deirdre Coyle at 617 292-2363 ext.242

Posted by Industrial-Manufacturing at 05:19 AM | Comments (0)

Broadata Communications, Inc. Increases Sales Force Due to 30% Growth in 2004

BCI announces that it has appointed Jim Banda as West Coast Account Manager. Due to its 30% growth in fiscal year 2004, BCI has increased its internal sales force to support and continue to build its external nation-wide dealer and reseller channels.

Torrance, CA (PRWEB) April 25, 2005 -- Broadata Communications, Inc. (BCI) announces that it has appointed Jim Banda as West Coast Account Manager. Due to its 30% growth in fiscal year 2004, BCI has swiftly responded by increasing its internal sales force to support and continue to build its external nation-wide dealer and reseller channels. Jim will be based in Torrance, California, joining Don Hosmer, National Sales Manager, and Jason Chian, International Sales Manager, who have both been with Broadata since its inception. Jim will be responsible for both business development and account management in California, Arizona, Nevada, Washington, Oregon and Hawaii. In addition to corporate sales initiatives, Jim will leverage local relationships to build business partnerships, joint ventures, and strategic alliances to further grow BCI’s West Coast business.

“Given Jim’s experience in establishing strategic sales and partnership programs, we are looking to him to increase our presence on the West Coast,” said Freddie Lin, President and CEO. “The addition of Jim to our team allows us the opportunity to enhance our sales and partner presence in North America.” Jim Banda added, “I pride myself on customer service and delivering on what I have promised.”

Broadata Communications, Inc. (BCI) develops, manufactures, and markets leading edge, fiber optic, multimedia communication products. The company’s patented products include audio, video, and data delivery over optical fiber for advanced multimedia, broadcast, and network transmission applications. BCI’s multimedia platforms enable end-users to implement multiple applications, conventionally requiring multiple optical transceivers and fiber links over a unified platform, needing only a single optical link. For more information visit the BCI Web site at http://www.broadatacom.com or call 800-214-0222.

Contact Information:
Cristina Spence, Director of Business Administration
Broadata Communications, Inc.
310-530-1416, Ext 240
800-214-0222
http://www.broadatacom.com

Posted by Industrial-Manufacturing at 05:19 AM | Comments (0)

ATP Announces Highest Capacity 512MB Dual Voltage RS-MMC(DV RS-MMC) Flash Cards. x8 Expansion of Data Storage Capability of Mobile Phones(Nokia 6630, 6680,6681, and 6682)

ATP Electronics Inc., a leading manufacturer of digital flash media products, today announced that it is beginning mass production of the world’s first 512MB dual voltage RS-MMC (DV RS-MMC). This follows ATP’s announcement in early February of 256/128MB DV RS-MMC product availability. The dual voltage (DV) feature allows for compatibility with devices running on the conventional 3.0V as well as with the dual voltage 3.0/1.8V devices. The low voltage feature translates to much lower power consumption, meaning a longer battery life for mobile digital devices of both today and tomorrow.

Sunnyvale, CA (PRWEB) April 25, 2005 -- The highest capacity 512MB DV RS-MMC card expands the storage capacity 8-fold, thus allowing for 8 times the amount of video, music, photos, games, and ringtones on new mobile phones which either require or can use dual voltage memory cards such as Nokia smartphones 6630, 6680, 6681, 6682 models.

Today these Nokia handsets and other digital mobile devices requiring dual voltage (DV) RS-MMC typically come bundled with a 64MB DV RS-MMC card. This poses a huge limitation on the amount of digital content a user can store. By offering such a high capacity 512MB card solution, ATP enables users to fully utilize the handsets' multimedia functions and feature sets, allowing for the enhanced ability to store and play video, music and games", said Danny Lin, ATP VP of Sales and Marketing.

ATP’s new DV RS-MMC memory cards offer the same advanced features as ATP’s other flash card products offering ample protection from water, dust, ESD (electro-static discharge), and extreme temperatures ranging from –40C to 85C. This allows for versatility and durability rarely found today in flash memory cards. The 512MB DV RS-MMC product is available immediately. 256MB and 128MB DV RS-MMC cards are also currently available.

About ATP
Founded in 1991, ATP (Advanced Technology & Packaging) Electronics, Inc. is a recognized leading manufacturer of high capacity flash digital media solutions as well as top quality memory module products. With strictly regulated ISO 9001 certified facilities and advanced technologies in memory packaging, flash card designs, testing and qualification, ATP differentiates itself from the competition, offering highly durable flash card solutions which in addition to high performance, offer protection from water/moisture, dust, static discharge, and extreme temperatures. High Speed, Weather Proof and Dependable Storage. ATP’s latest flash products feature 2GB SD and MMC, as well as 1GB miniSD, RS-MMC and Dual-Voltage (DV) RS-MMC. For more information on ATP memory products, visit http://www.atpinc.com.

About RS-MMC
At 24 x 18 x 1.4mm and about half the size of the MMC, the Reduce-Size MultiMediaCard (RS-MMC) is a standard memory card format from the MultiMediaCard Association (MMCA). For more information about the MMCA, http://www.mmca.org

ATP and the ATP logo are trademarks of ATP Electronics Inc. All other brand or product names are trademarks or registered trademarks of their respective holders.

Press Contact:
Daphne Jang
TEL: 408-732-5859
Fax: 408-732-5055

Posted by Industrial-Manufacturing at 05:18 AM | Comments (0)

Concepts in Mold Building and Design Seminar Announced

Comprehensive Two-day Seminar Provides a State-of-the-Art Guide to Designing and Building Injection Molds

East Hanover, NJ (PRWEB) April 25, 2005 -- SeminarsForEngineers.com, a wholly owned subsidiary of Sensor Products LLC, announces its 2005 Concepts in Mold Building and Design seminar to be held June 16-17 in Las Vegas, NV. Focusing on mold classifications and components, as well as runner systems and temperature control, this seminar also emphasizes practical problem solving techniques.

Instructed by Robert Dealy, a renowned authority in the area of plastics engineering and member of the Society of Plastics Engineers, this popular seminar has proven to be an essential resource for product design and process engineers, manufacturing, QA/QC, plastics and tooling engineers, as well as sales/service, purchasing, maintenance and management personnel.

More information about this and other technical seminars is available at www.SeminarsForEngineers.com or by contacting Bill Ebner at 1.973.560.9092.

About SeminarsForEngineers.com
SeminarsForEngineers.com, headquartered in East Hanover, New Jersey USA, was founded in 2003 by Sensor Products LLC as a useful information resource for their clientele. Focusing on specialized engineering topics, these two-day technical courses are designed to disseminate the most current and comprehensive information available and provide practical problem solving techniques for a broad spectrum of manufacturing and R&D professionals. Topics ranging from Fastening Technology and Bolted Joint Design and Static & Dynamic Sealing to Web Handling and Converting and Composite Materials Design, Testing & Fabrication are taught by the foremost authorities in their fields. Company website: www.SeminarsForEngineers.com

About Sensor Products LLC
New Jersey based Sensor Products LLC, established in 1990, is a world leader in the manufacture and distribution of tactile pressure sensing solutions. Their customized and off-the-shelf products are installed within all of the Fortune 500 industrial companies as well as thousands of smaller manufacturing firms. Their sensors are used in applications as diverse as tire testing to semiconductor manufacturing and from R&D labs to space missions. Additionally, Sensor Products provides in-house and on-site stress and pressure mapping analysis, as well as a variety of regional technical seminars. Visit them at www.sensorprod.com.

Media Contact:
Heather D. Brown
Sensor Products LLC USA
Public Relations Specialist
1.973.884.1755 x5826

Posted by Industrial-Manufacturing at 05:17 AM | Comments (0)

MultiTest – A New Range of Tension and Compression Test Frames

A particularly cost-effective method for evaluating quality of manufactured products, components or materials is by measuring response to applied tensile or compressive loads. Mecmesin has announced the launch of ‘MultiTest’ a range of motorised test stands for tension and compression testing in industrial quality control laboratories.

(PRWEB) April 25, 2005 -- Mecmesin has launched ‘MultiTest’ a comprehensive new range of motorised test stands for tension and compression testing. A system based upon one of these stands, a force gauge or loadcell, and appropriate fixtures and accessories can be used to measure:

- ‘pull-off’ resistance of crimped electrical connectors
- peel strength of induction-sealed foils and adhesive films or labels
- characteristic forces and deflections of switches and keypads
- top-load strength of bevcans, PET bottles and other containers
- insertion and withdrawal forces of connectors, fasteners, blades/needles – or corks
- performance of compression springs, tension springs and spring assemblies

The basic MultiTest range, with a suitable capacity BFG (Basic Force Gauge) or AFG (Advanced Force Gauge) forms the basis of a budget-priced system where a single maximum force needs to be captured. Such a system would, for example, be ideal for capturing: the failure force of a crimped electrical joint, the force to initiate peeling or tearing of a seal, sliding of a film, or the collapse of a container. MultiTest systems with a frame capacity of 1000N or 2500N are available.

The MultiTest–x range feature console-controlled machines, with load, displacement and crosshead speed being displayed. System features include: dynamic zeroing, running to load, length, time or break, loadholding and averaging. A facility for creating simple programs, with up to five test routines being stored is also provided. Such a system is particularly suitable for testing: springs, plastics, rubbers, elastomers. A MultiTest-x system can be used in environments unsuitable for a PC. MultiTest-x systems with a load capacity of 1000N, 2500N and 5000N are available.

The MultiTest-i range can be fully-controlled by Mecmesin’s powerful, flexible and user-friendly ‘Emperor’ software. Quality engineers and packaging technologists will find this materials testing system particularly useful for developing sophisticated test procedures and analyses to suit their particular requirements. MultiTest-i systems are available with load capacities of 1000N, 2500N and 5000N.

Posted by Industrial-Manufacturing at 05:16 AM | Comments (0)

Kozio, Inc. Names New Business Development Director; Ed Kase Joins Longmont-based Provider of Embedded Software for System-level Hardware Testing

Kozio, Inc., a leading provider of embedded software for system-level hardware testing, has named Ed Kase as its director of business development. Kase brings to Kozio more than 20 years of experience in the software industry.

Longmont, CO (PRWEB) April 25, 2005 -- Kozio, Inc., a leading provider of embedded software for system-level hardware testing, has named Ed Kase as its director of business development. Kase brings to Kozio more than 20 years of experience in the software industry.

"I'm excited to have Ed join us," stated Kozio President Joseph Skazinski. "He brings a wealth of expertise in sales, marketing and business development, and his previous work in marketing and selling software, along with business relationships he's developed over his career, will help Kozio continue our growth in the embedded software market."

Kozio's new director of business development role has been created to help the company strengthen its market position in the embedded software arena, reinforce its current sales force and foster new relationships with processor board vendors and OEMs in the U.S. and Europe. Kase will report to Joseph Skazinski, Kozio's founder, president and CEO.

"I’m very pleased to contribute to this next phase of growth at Kozio," notes Kase. "Kozio software and services provides a unique capability in the market that helps board manufacturers save time and money. As companies focus on their core competencies in design and manufacturing, and leverage expertise like the diagnostics and testing provided by Kozio, the whole industry will benefit."

Kase's software experience is focused on the numerical modeling and test and measurement markets. Throughout his career, he has directed marketing, sales and professional services organizations. Kase has a Bachelor of Science degree in mechanical engineering from Clarkson University in Potsdam, New York.

About Kozio, Inc.
Kozio, Inc. develops software solutions that verify design and validate hardware for embedded single-board computer systems used in products such as ADSL gateways, wireless access points, network routers, voice solutions, security and test equipment, and aerospace systems. Kozio's products provide comprehensive test solutions, including diagnostics for board bring-up, automated manufacturing test, and built-in self-test software for manufactured products. Kozio's customers design, develop and manufacture boards used in computer-based electronic systems for the aerospace, networking, defense, test and wireless industries. Kozio products ease many embedded systems development challenges, from design through manufacturing and support, saving customers time and money. The company is privately held and based in Longmont, Colorado. For more information, visit www.kozio.com.

kDiagnostics is a registered trademark of Kozio, Inc. All other trademarks are property of their respective owners.

Contact: Ed Kase, Kozio, Inc., (303) 776-1356, e-mail protected from spam bots, Joseph Skazinski, Kozio, Inc., e-mail protected from spam bots, or Brad Shannon, Shannon Marketing Communications, (970) 461-4906, e-mail protected from spam bots.

Posted by Industrial-Manufacturing at 05:16 AM | Comments (0)

Leveraging Lean Sigma in Non Manufacturing Processes to Broaden Continuous Improvement

There is a whole World Outside of the Manufacturing Shop Floor Waiting for Improvement.’ The Lean Sigma Office Conference, 20th September 2005 will facilitate executives on their journey to a leaner office. Participating in this Conference is the American Society for Quality, they will organize a Quality Café lead by Paul Borawski, Executive Director/Chief Strategic Officer. Incorporated within this three- day agenda is a post- conference seminar ‘ Benefiting from Sarbanes Oxley Requirements Through Beyond Lean Six Sigma Techniques.’ Leading this seminar is Forrest Breyfogle III founder and President of Smarter Solutions Incorporated. For more information about this seminar please go to www.marcusevans.com/sarbanessixsigma

(PRWEB) April 25, 2005 -- In addition to the previously mentioned highlights industry leaders will reiterate the importance of implementing Lean & Six Sigma into the office/administrative functions. Industry Leaders such as Will Decker, Director of Center lean thinking from the University of Toyota will divulge his expertise on ‘Lean Thinking: A Principle Centered Approach to Serving and Adding Value to Customers’. Henry Goldberg; Director of Finance for Motorola will explain how he helped his organization ‘Manage Change Across in the Transactional Environment to Secure Lean Sigma Success’. Experts from The Dow Chemical Company and The Whirlpool Corporation will be just two of the many companies sharing their knowledge and expertise.

This conference will act as a learning forum for those who are ready to take the next step in the Lean Sigma Journey. With the correct implementation organizations can reduce costs while increasing performance and efficiency. Companies that fail to successfully apply Lean and Six Sigma techniques to their Office/ administrative functions will risk a stalled or regressed factory initiative.

Posted by Industrial-Manufacturing at 05:15 AM | Comments (0)

Lean Manufacturing via E-Kanban: Blanket Purchase Orders

Lean Manufacturing via E-Kanban: Blanket Purchase Orders

(PRWEB) April 25, 2005 -- Blanket Purchase Orders are a “best practice” in the well-oiled kanban process. They minimize the flow of information between buyers and their suppliers, while maintaining the terms, conditions and integrity of the business relationship between the two parties. Datacraft Solutions (www.datacraftsolutions.com), the leader in e-kanban, found that while managing a large number of suppliers with many part numbers, managing the integrity of blanket purchase orders become an issue. For every given kanban release it is important to make sure that: an open purchase order still exists, and that there was enough remaining balance on the purchase order to cover the current purchase. The new Best Practice was “integrating the electronic kanban system” with a manufacturers current purchasing system. Kanbans are now guaranteed never to be sent to supplier unless there is a valid blanket purchase order.

Fax Kanban is not efficient and not Lean

At ten minutes per fax, someone is spending 3.5 hours per day in administration time. That inefficiency results in less time to utilize more suppliers or improve the relationships with existing suppliers.

Furthermore, even if 99% of those faxes are trouble free procurement signals, four faxes per month are going to be problematic and dilute the entire rationale for a lean manufacturing operation. Suppliers claim they did not receive the fax kanban; suppliers cannot make the shipment date requested and expedited shipping fees are incurred, or worse, there will be a stockout which will negatively impact customer service levels.

Datacraft Solutions
www.datacraftsolutions.com
Sam Bayer
e-mail protected from spam bots
919-667-9804

Posted by Industrial-Manufacturing at 05:14 AM | Comments (0)

Engineer-to-Order Manufacturers and Design Engineers

Engineer-to-Order Manufacturers and Design Engineers

(PRWEB) April 25, 2005 -- According to Roger Meloy of ETO ERP leader Encompix, based in Cincinnati, OH, “If you ask design engineers what an ERP system means to them, you are likely to hear something like “nothing” or “more work.” To most design engineers, an ERP system is either irrelevant or it is perceived as something that requires additional time and effort, often providing little or no value. One reason for this perception is that most ERP systems are not integrated with the design engineer’s drawing tool.

Traditional ERP systems were developed for the repetitive, make-to-stock manufacturer, where there is a clear demarcation between design and production. In that environment the engineer designs the product in a CAD application. After testing and prototyping, the product is released to production, which is managed by the ERP system.

The design engineer has little or no interaction with the ERP system and works quite happily in a CAD environment. Following the work of the design engineer, a production engineer then creates a bill of material (BOM), based not on how the product is designed but how it will be manufactured.

In the Engineer-to-Order (ETO) world the role of the design engineer is very different. By its nature an ETO company builds a unique product designed to meet the specification of a single customer. The two worlds of design and manufacturing are closely linked. In many cased the design of the product continues through the product process (design-in-process), incorporating a multitude of engineering changes. These changes can be driven by the customer or by the manufacturer. In this environment a seamless flow of data between engineering and production is critical. An ETO company must integrate CAD and ERP.

Encompix (www.encompix.com) has filled the manufacturing software requirements of Engineer-to-Order companies since 1992. The company name reflects our commitment to developing business application solutions that encompass the complex areas of project-based and job-based manufacturing.

Encompix provides ETO manufacturers with a competitive advantage by improving bottom line results.

Posted by Industrial-Manufacturing at 05:13 AM | Comments (0)

Small Manufacturers Find Rapid ROI by Leasing Manufacturing Software

Small Manufacturers Find Rapid ROI by Leasing Manufacturing Software

(PRWEB) April 25, 2005 -- E-Z-MRP, the leading manufacturing software system for small manufacturers, announced effective April 15th, there will be a new pricing and product structure. According to Rocky Smolin, founder of Beach Access Software, makers of E-Z-MRP, “We see a distinction between those small manufacturers with less than five hundred parts in material resource planning, and those with a need for unlimited part numbers.”

Smolin noted that some manufacturers will start with the under 500 parts version of E-Z-MRP, priced at $2995, and grow into the new unlimited version, priced at $9800. Beach Access Software credits the $2995 for customers who later choose to upgrade. Other small manufacturers who presently have more than five hundred part will start right away with the E-Z-MRP Unlimited version.

To accommodate the new pricing structure E-Z-MRP offers a Leasing program that ensure a rapid Return-on-Investment.

- Lease E-Z-MRP with two full years of support for just $169.96 per month.
- Lease E-Z-MRP Unlimited with two full years of support for just $495.00 per month.
For more information visit the company’s web site: http://www.e-z-mrp.com, or call 858-259-4334.

Small manufacturers with more than one hundred parts can no longer manage the manufacturing process on an Excel spreadsheet. Since more than 84% of all manufacturers have less than fifty employees, there is a remarkable opportunity for cost-effective manufacturing systems like E-Z-MRP. Despite the extensive media coverage regarding ERP (Enterprise Resource Planning), in most cases these small manufacturers do not require all the functionality offered, nor can many afford the price point.

Somewhere between Excel and ERP is the core process for most manufacturers. By offering the two versions of E-Z-MRP, no small manufacturer will be required to purchase more software than actually needed, while still having the ability to grow into the E-Z-MRP Unlimited version.

The EZ MRP package includes a full-featured Bill of Materials processor, plus a material planning and tracking module which tracks all sales orders, forecasts, work orders (planned, firm, and released), purchase orders, shortages, raw materials and finished goods inventories. It also records a complete audit trail on all inventory transactions. Also included is a physical inventory function and a purchase order module for printing purchase orders.

E-Z-MRP runs on any Windows-based PC or network, and requires only Access 2000, Access XP, or Access 2003 to run. No on-site or remote training is required. A comprehensive user manual with tutorials provides all the required instruction.

Beach Access Software
Rocky Smolin
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 05:12 AM | Comments (0)

PRONTO North America Marketing Director Verzi Thrilled to Have Cutler and Smedley at Users Conference

PRONTO North America Marketing Director Verzi Thrilled to Have Cutler and Smedley at Users Conference

(PRWEB) April 25, 2005 -- Wednesday, May 4th, Thomas R. Cutler, CEO of TR Cutler, Inc., author of the Manufacturers Public Relations and Media Guide, Associate Editor of Industrial Connection, and Contributing Editor to InMFG magazine will be addressing the first annual PRONTO North America Users Conference. Cutler is also the founder of the Manufacturing Media Consortium, a group of 2000 journalists writing about various aspects of manufacturing and industrial trends.

Peggy Smedley is the editor of Start Magazine and will also address the PRONTO North America Users Conference on Thursday, May 5th. Smedley was recently profiled in the Wall Street Journal and authored Mending Manufacturing, How America Can Manufacture its Survival. She is an award-winning journalist.

Tom Verzi, Director of Marketing for PRONTO North America, expressed his delight with both speakers, “We are thrilled to have both Peggy Smedley and TR Cutler address our first PRONTO North America Users Conference. Both are distinguished journalists in the manufacturing sector and will provide great insight to our customers.”

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the manufacturing, service, and distribution ERP leader.

Tom Verzi
PRONTO ERP
952-942-5858
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 05:12 AM | Comments (0)

Falcon-Software has Recently Entered into a Contract Agreement with Data Display Based in El Segundo, for the Development of a new Corporate Website

Falcon-Software has recently entered into a contract agreement with Data Display based in El Segundo, for the development of a new corporate website.

Victoria, BC (PRWEB) April 24, 2005 -- Falcon-Software Company has recently entered into a contract agreement with Data Display Products located in El Segundo, California for the design and development of their new corporate website. The primary objectives will be to improve the company’s brand image and to deliver online applications and product information more efficiently. The websites will also include component based eBusiness tools and integration of their eCommerce ordering system.

Since 1970, Data Display Products (www.datadisplay.com) has pioneered the design and development of LED lamps, panel lights, and board-level indicators to provide primary status indication and backlighting of switches, lenses and legends. Data Display’s 30,000-square-foot manufacturing facility includes a flexible production line, a dedicated quality assurance department, surface-mount assembly equipment, a machine shop for product development, and an engineering lab for new product design and qualification.

About Falcon-Software Company, Inc.
Falcon-Software Company www.falcon-software.com is a leading web design and multimedia firm specializing in web based solutions for companies across North America. Falcon-Software offers a complete range of web-based design, development and business application services including prototype development, site architecture planning, creative graphic designs and photo imagery, advanced programming capabilities, rich-media production and online marketing services.

For Additional Information:
Natalie Evans - e-mail protected from spam bots
Marketing & Public Relations
250-480-1311

Posted by Industrial-Manufacturing at 05:11 AM | Comments (0)

FCI Vibratory Feeders Introduces Our Streamlined Business Approach to Fulfilling Industrial Automation’s Need for Orienting Vibratory Feeders

Since 1988, FCI Vibratory Feeders (www.vibratory-bowl-feeders.com) has offered premier vibrating feeder bowls for production lines across the country.

(PRWEB) April 24, 2005 -- Over the years, we have paid close attention to what we’ve been told by the engineers and production managers who have relied on us for design, modification, and service to their various types of vibratory bowl feeders. As a result, we are now taking the process of integrating feeder applications another step further with the technological advantages of the internet. FCI Vibratory Feeders enables you to accelerate the phase of researching the costs and options relating to orienting vibratory feeders by allowing you to request quotes online and obtain a response the same day.

The amount of teamwork and organization involved in managing, designing and implementing a production line is staggering. When such a wide range of factors is under consideration, our team understands the need to simplify some of the more basic tasks involved in developing solutions for production line service, additions, or adaptations. That is why FCI Vibratory Feeders is committed to providing information and service on your vibrating feeder bowls with as little effort on your behalf as you desire. This fact becomes immediately apparent when customers inquire about our products and services. By utilizing our online Quote Request, customers can submit the basic information concerning their feeding system requirements and expect a response within 24 hours. This way, customers won’t have to overextend their already preoccupied staff with such concerns as playing phone tag with sales representatives, or perpetually explaining their needs to a variety of parties.

To learn more about the ways in which we can assist your organization, please feel free to visit our website: www.vibratory-bowl-feeders.com, For specific information about specific vibratory bowl feeders you are welcome to submit an online Quote Request. In addition, you may either call, or write to us:

FCI Vibratory Feeders
15235 Herriman Boulevard
Noblesville, Indiana 46060
Ph: 317/773-2040
FAX: 317/773-1494

We look forward to the opportunity of demonstrating our simplified method of presenting solutions.

FCI Vibratory Feeders … supplying the feeding system needs of industrial automation with superior products, service and business techniques.

Posted by Industrial-Manufacturing at 05:10 AM | Comments (0)

FCI Vibratory Feeders Introduces Our Streamlined Business Approach to Accomplishing Vibratory Feeding Systems Objectives within the Industrial Automation Realm

Since 1988, FCI Vibratory Feeders (www.vibratory-bowl-feeders.com) has offered premier vibratory feeder solutions for production lines across the country.

(PRWEB) April 24, 2005 -- Over the years, we have paid close attention to what we’ve been told by the engineers and production managers who have relied on us for design, modification, and service to their vibratory feeding systems. As a result, we are now taking the process of integrating feeder applications another step further with the technological advantages of the internet. FCI Vibratory Feeders enables you to accelerate the phase of researching feeding system costs and options by allowing you to request quotes online and obtain a response the same day. At that time, we may also be able to include information regarding used vibratory feeders if you indicate in your request that you are interested.

The amount of teamwork and organization involved in managing, designing and implementing a production line is staggering. When such a wide range of factors is under consideration, our team understands the need to simplify some of the more basic tasks involved in developing solutions for production line service, additions, or adaptations. That is why FCI Vibratory Feeders is committed to providing information and service for your vibratory feeding systems with as little effort on your behalf as you desire. This fact becomes immediately apparent when customers inquire about our products and services. By utilizing our online Quote Request, customers can submit the basic information concerning their feeder system requirements and expect a response within 24 hours. If the cost of new equipment is a concern, then our customers simply indicate that they would be interested in used vibratory feeders or components, as we are always happy to include information regarding cost and availability. This way, customers won’t have to overextend their already preoccupied staff with such concerns as playing phone tag with sales representatives, or perpetually explaining their needs to a variety of parties.

To learn more about the ways in which we can assist your organization, please feel free to visit our website: www.vibratory-bowl-feeders.com, For specific information about used vibratory feeders or other feeding system solutions, you are welcome to submit an online Quote Request. In addition, you may either call or write to us:

FCI Vibratory Feeders
15235 Herriman Boulevard
Noblesville, Indiana 46060
Ph: 317/773-2040
FAX: 317/773-1494

We look forward to the opportunity of demonstrating our simplified method of presenting solutions.

FCI Vibratory Feeders … supplying the feeding system needs of industrial automation with superior products, service and business techniques.

Posted by Industrial-Manufacturing at 05:09 AM | Comments (0)

FCI Vibratory Feeders Introduces Our Unique Business Approach to Accomplishing Vibratory Feeder Objectives within the Industrial Automation Realm

Since 1988, FCI Vibratory Feeders (www.vibratory-bowl-feeders.com) has offered premier vibratory feeder solutions for production lines across the country.

(PRWEB) April 24, 2005 -- Over the years, we have paid close attention to what we’ve been told by the engineers and production managers who have relied on us for design, modification, and service to their vibratory feeding systems. As a result, we are now taking the process of integrating feeder applications another step further with the technological advantages of the internet. FCI Vibratory Feeders enables you to accelerate the phase of researching feeding system options by allowing you to request quotes online and obtain a response the same day.

The amount of teamwork and organization involved in managing, designing and implementing a production line is staggering. When such a wide range of factors is under consideration, our team understands the need to simplify some of the more basic tasks involved in developing solutions for production line service, additions, or adaptations. That is why FCI Vibratory Feeders is committed to providing information and service for your vibratory feeding systems with as little effort on your behalf as you desire. This fact becomes immediately apparent when customers inquire about our products and services. By utilizing our online Quote Request, customers can submit the basic information concerning their vibratory feeder requirements and expect a response within 24 hours. This way, customers won’t have to overextend their already preoccupied staff with such concerns as playing phone tag with sales representatives, or perpetually explaining their needs to a variety of parties.

To learn more about the ways in which we can assist your organization, please feel free to visit our website: www.vibratory-bowl-feeders.com, For specific information about a particular vibratory feeder solution or component, you are welcome to submit an online Quote Request. In addition, you may either call or write to us:

FCI Vibratory Feeders
15235 Herriman Boulevard
Noblesville, Indiana 46060
Ph: 317/773-2040
FAX: 317/773-1494

We look forward to the opportunity of demonstrating our simplified method of presenting solutions.

FCI Vibratory Feeders … supplying the feeding system needs of industrial automation with superior products, service and business techniques.

Posted by Industrial-Manufacturing at 05:08 AM | Comments (0)

FCI Vibratory Feeders Introduces Our Streamlined Business Approach to Fulfilling Industrial Automation’s Vibratory Feeder Equipment Needs

Since 1988, FCI Vibratory Feeders (www.vibratory-bowl-feeders.com) has offered premier vibratory feeder equipment for production lines across the country.

(PRWEB) April 24, 2005 -- Over the years, we have paid close attention to what we’ve been told by the engineers and production managers who have relied on us for design, modification, and service to their various types of vibratory feeder bowls. As a result, we are now taking the process of integrating feeder applications another step further with the technological advantages of the internet. FCI Vibratory Feeders enables you to accelerate the phase of researching vibratory feeder equipment costs and options by allowing you to request quotes online and obtain a response the same day.

The amount of teamwork and organization involved in managing, designing and implementing a production line is staggering. When such a wide range of factors is under consideration, our team understands the need to simplify some of the more basic tasks involved in developing solutions for production line service, additions, or adaptations. That is why FCI Vibratory Feeders is committed to providing information and service on your vibratory feeder bowls and equipment with as little effort on your behalf as you desire. This fact becomes immediately apparent when customers inquire about our products and services. By utilizing our online Quote Request, customers can submit the basic information concerning their feeding system requirements and expect a response within 24 hours. This way, customers won’t have to overextend their already preoccupied staff with such concerns as playing phone tag with sales representatives, or perpetually explaining their needs to a variety of parties.

To learn more about the ways in which we can assist your organization, please feel free to visit our website: www.vibratory-bowl-feeders.com, For specific information about specific vibratory feeder equipment, you are welcome to submit an online Quote Request. In addition, you may either call or write to us:

FCI Vibratory Feeders
15235 Herriman Boulevard
Noblesville, Indiana 46060
Ph: 317/773-2040
FAX: 317/773-1494

We look forward to the opportunity of demonstrating our simplified method of presenting solutions.

FCI Vibratory Feeders … supplying the feeding system needs of industrial automation with superior products, service and business techniques.

Posted by Industrial-Manufacturing at 05:07 AM | Comments (0)

New Deal to Bring Padre-Tirem Trolley and Tools to the UK

Specialist tool supplier to engineers in automotive, aerospace, general industry and enthusiast markets, Damar International, has announced a deal to provide the Padre-Tirem range of mobile trolleys and tools. The extensive range of German manufactured tools include sockets, wrenches, cutters, pliers, screwdrivers, ratchet, keys and much more - all illustrated in a 400-page CD catalogue.

(PRWEB) April 23, 2005 -- Specialist tool supplier to engineers in automotive, aerospace, general industry and enthusiast markets, Damar International, has announced a deal to provide the Padre-Tirem range of mobile trolleys and tools. The extensive range of German manufactured tools include sockets, wrenches, cutters, pliers, screwdrivers, ratchet, keys and much more - all illustrated in a 400-page CD catalogue.

“Value for money throughout the range, the quality of Padre-Tirem tools and the innovative and flexible design of their trolleys are the key assets that we believe will attract UK engineers throughout industry,” explained Brian Martin, managing director of Damar International.

To launch the new name to the UK market, Damar are offering a sturdy mobile tool trolley complete with a full 116 piece tool set for an exceptionally low introductory price of £525 plus vat and delivered free anywhere in the UK mainland.

The trolley is typical of Padre-Tirem’s superior design in that the four drawers open out on both sides. This allows many more items to be at hand and allows two or more people to have easy access at the same time. For speed and convenience, module tool holders keep everything arranged in order. In the base, a cavernous storage area provides plenty of space for the safe keeping of cable reels, bottles and containers. Above this area is an extra sliding half-tray to suit taller item storage.

Reliable wheel sets ensure the trolleys are easy to move around the work area as required. Front and rear sliding shields with locking and individual release helps protect the valuable contents.

Information on the full range of Padre-Tirem products and a copy of the extensive catalogue is available from Damar International on 01162 764 144.

More Information
Brian Martin, Managing Director, Damar International Ltd
Clipper Road, Troon Industrial Estate, Leicester, LE4 9JE, UK
Tel. +44 (0)1162 764144 Fax. +44 (0)1162 460663
E-mail: e-mail protected from spam bots Web: www.damar.biz

High res image can be downloaded from: www.clickintopr.com/editors/articleDetail.asp?pjID=171

Posted by Industrial-Manufacturing at 05:07 AM | Comments (0)

ESS Selected as Sole Goggle Awardee for the US DOD Combat Eye Protection Solicitation - ESS ICE-2 Spectacle Also Added to the Authorized Equipment List

Eye Safety Systems, Inc. (ESS) is the sole recipient of the goggle award for the US Department of Defense’s Combat Eye Protection (CEP) solicitation #DAAD16-03-R-0027.

Sun Valley, ID (PRWEB) April 23, 2005 -- Eye Safety Systems, Inc. (ESS) is the sole recipient of the goggle award for the US Department of Defense’s Combat Eye Protection (CEP) solicitation #DAAD16-03-R-0027. The solicitation process spanned approximately one year ending August 26, 2004. During this time, a comprehensive evaluation of commercial and developmental eye protection systems was conducted by the US Army’s PEO Soldier Office in cooperation with Marine Corps Systems Command and the Natick Soldier Center to determine which products would be placed on a list of authorized combat eyewear and considered for multi-service type classification.

The evaluation considered four principal product factors, listed below in order of importance:
1. Ballistic Characteristics
2. Human Factors
3. Physical Characteristics
4. Carrying Case

The evaluation also considered manufacturing and warranty factors, as well as past performance.

At the conclusion of the CEP solicitation, the ESS Vehicle Ops™ model goggle (NSN: 4240-01-525-5101) was selected for the contract award, with special mention of two other ESS models that had previously been widely purchased through the Rapid Fielding Initiative (RFI). Those models are the ESS Profile NVG™ goggle (NSNs: 4240-01-504-6222 and 4240-01-504-5727) and the ESS Land Ops™ goggle (NSN: 4240-01-504-0052), which continue to be the goggles most widely procured by the US Department of Defense. The award notification letter commented on the performance of these three ESS products:

“After a very careful evaluation process it was determined that, of the three goggles proposed by Eye Safety Systems, Inc., the Vehicle Ops Goggle best meets the Government’s needs at this time. While the overall rating for all three goggles was considered outstanding, limited resources resulted in the selection of one goggle for this solicitation, the Vehicle Ops Goggle.” – Natick Contracting Officer

At this time, the only commercial goggles authorized for use by the US Army are the ESS Profile NVG™, Land Ops™, and Vehicle Ops™ goggles. The ESS ICE-2™ spectacle was also placed on the list of authorized combat eye protection systems as a result of the CEP solicitation evaluation.

Brian Ross
General Manager
e-mail protected from spam bots
+ 208.726.4072

Posted by Industrial-Manufacturing at 05:06 AM | Comments (0)

ESS Releases Next Generation Anti-Fog Goggle: The Profile TurboFan™

Eye Safety Systems, Inc (ESS) has recently introduced an elite military and tactical goggle system, the Profile TurboFan™. The new model integrates the company’s patented TurboFan™ fog elimination technology with the low-profile frame design of the most widely used goggle in the US military: the ESS Profile NVG™.

Sun Valley, ID (PRWEB) April 23, 2005 -- Eye Safety Systems, Inc (ESS) has recently introduced an elite military and tactical goggle system, the Profile TurboFan™. The new model integrates the company’s patented TurboFan™ fog elimination technology with the low-profile frame design of the most widely used goggle in the US military: the ESS Profile NVG™.

The ESS TurboFan™ system relies on micro-rotor technology to draw fresh air into the goggle while exhausting humid air that could promote condensation. The effect is that the fan eliminates fogging before it starts, allowing the operator to focus 100% on the mission at hand. The fan runs at two speeds: high for maximum anti-fog and low for sustained near-silent operation. The low-profile battery case takes 2 AAA batteries, which lasts over 50 hours on the low speed setting.

Designed for SWAT, Special Ops, and CQC (Close Quarter Combat), the Profile TurboFan™ excels in environments of rapid temperature fluctuation, extreme cold weather, or excessive perspiration. Product features include:

- Hi and low fan settings to regulate fog elimination
- High-impact 2.8mm polycarbonate lenses
- Fleece-lined face padding for warmth and extended comfort
- Lockout switch to prevent accidental activation of the fan
- Rx insert and laser protection accessories available
- Robust battery pack to withstand the rigors of military and tactical use
- Low profile frame design for night vision equipment compatibility

ESS will continue to produce the original Striker TurboFan™, which utilizes the same fan technology in a larger frame that fits over eyeglasses. “The Striker TurboFan™ makes a lot of sense for users who wear eyeglasses, since the fan system prevents fogging on the eyeglass lenses as well as the goggle lens,” says ESS president John Dondero.

Brian Ross
General Manager
e-mail protected from spam bots
+ 208.726.4072

Posted by Industrial-Manufacturing at 05:05 AM | Comments (0)

Foxboro Introduces Embedded Virus Protection for Windows-Based I/A Series System Workstations

Now I/A Series Windows XP-based I/A Series workstations come with McAfee’s best-in-class VirusScan Enterprise software pre-installed for immediate protection

(PRWEB) April 23, 2005 -- The Foxboro Automation unit of Invensys Process System has announced that all new I/A Series Workstations for Windows will come with McAfee VirusScan Enterprise software pre-installed at the factory. This provides I/A Series systems with a very high degree of protection from plant disruptions caused by software virus outbreaks beginning right from the point of manufacture through system setup, configuration, acceptance testing, commissioning, and day-to-day process control operations.

“To the best of our knowledge – and we’ve done quite a bit of research on this point – no other major automation vendor ships their control systems with virus protection software already installed. Factory installation is critical, because potential vulnerability to computer viruses begins the minute the system is started up and connected to a network,” said Ernie Rakaczky, director of process control system security at Invensys Process Systems. “While effective virus protection is just one element in an overall automation system security strategy, I/A Series users can be confident the that their Windows-based workstations will be well-protected against both incoming and outgoing viruses, and that Invensys has pre-qualified the embedded McAfee VirusScan Enterprise software to ensure that it will not interfere with their mission-critical industrial applications.”

About Invensys
Invensys is an automation, controls and process solutions Group working to create value for customers and investors. Our products, services, expertise and ongoing support enable intelligent systems to monitor and control processes in many different environments. The businesses within Invensys help customers in a variety of industries - including hydrocarbons, chemicals, oil and gas, power and utilities, rail, telecommunications, paper, food and beverage, dairy, pharmaceuticals and personal care - to perform with greater efficiency, safety and cost-effectiveness.

Process Systems (IPS) provides products, services and solutions for the automation and optimisation of plant operation in the process industries. APV specialises in process equipment engineered into systems and asset services for food, beverage, personal care, pharmaceutical and chemical clients. Eurotherm is a leading supplier of control and measurement instrumentation solutions and services to industrial and process customers. Rail Systems is a multinational leader in the design, manufacture, supply, installation, commissioning and maintenance of safety-related rail signalling and control systems. Climate Controls is a major provider of the components, systems and services used across the world to make commercial and residential environments safer, more comfortable and more efficient. Appliance Controls has the broadest system and component offering for the appliance industry worldwide.

The Invensys Group is headquartered in the UK and listed on the London Stock Exchange. With 35,000 employees operating in 60 countries, Invensys helps customers to improve their performance and profitability, building value for end users and shareholders alike.

I/A Series, Foxboro, Foxboro I/A Series, APV, Avantis, IMServ, SimSci-Esscor, Triconex, and Wonderware are trademarks of Invensys plc, its subsidiaries, or affiliates. All other trademarks are trademarks of their respective owners.

Full details can be found at http://www.ballard.co.uk/press_releases/company_releases.aspx

Posted by Industrial-Manufacturing at 05:04 AM | Comments (0)

Foxboro Coriolis Mass Flowmeter Now Certified for International Custody Transfer Applications

Invensys Process Systems has announced that the Foxboro CFT50 Digital Coriolis Mass Flow Meter has been certified internationally for custody transfer applications. The CFT50 is certified by the Norwegian Metrology Service (NMS) for indoor, outdoor, and mobile measurement of mass flow, volume, and density. It is approved for flow measurement accuracy of 0.3 or 0.5 for custody transfer of liquids ranging in temperature from -220 degrees C to +180 C. The NMS represents the International Organization of Legal Metrology (OIML) in Norway and follows OIML standards and procedures. The OIML is a worldwide, intergovernmental organisation that oversees the regulations and metrological controls of 22 European member and affiliated countries.

(PRWEB) April 23, 2005 -- Featuring patented Coriolis flow measurement technology, the Foxboro CFT50 provides uninterrupted, accurate flow measurement with partially empty tube conditions, a traditional problem for custody transfer flow measurement.

“Accurate measurement of materials processed during custody transfer is important to both buyers and sellers,” says Joseph E. Downey, director of marketing, Invensys Process Systems, Foxboro Measurement & Instrument Division. “By minimising wasted materials left on the bottom of transport vessels and improving transfer yields, the CFT50 provides more accurate material accountability, which is a direct contribution to bottom line performance. This is win-win situation for both entities involved in the transaction,” says Downey.

Conventional Coriolis meters typically either render inaccurate measurements or stall when they encounter two-phase flow containing both gas and liquid. The CFT50’s ability to handle two-phase flow make it ideal for applications such as liquid CO2, which can flash to gas phase during transfer, and for emptying tank cars, where high volumes of air come through with the liquid being transferred from the bottom of the tank. The Foxboro CFT50 can also improve custody transfer of materials with entrained air, including specialty chemicals, petrochemicals, pharmaceutical ingredients, dairy products and any high value or viscous material.

The NMS certificate of approval for custody transfer applies to the Foxboro mass flow meter system consisting of the CFT50 digital Coriolis transmitter and Foxboro CFS10 or CFS20 flowtube sensors.

The CFT50 transmitter is based on patented microprocessor technology developed through a collaborative program between the Invensys Process Systems and Oxford University in the UK. The proprietary technology involves new signal processing techniques used to provide useful measurements of both mass flow and density, and the operational aspects of keeping the Coriolis meter running stably in single-phase or two-phase flow conditions.

The CFS10 is a single path flowtube design for shear sensitive fluids, and in applications requiring positive cleaning. The CFS20 is a dual path flowtube for most other applications. Both are available with 3A Authorization for sanitary applications.

Full details can be found at http://www.ballard.co.uk/press_releases/company_releases.aspx

About Foxboro M&I Division
The Foxboro Measurement and Instrument (M&I) Division has a long-standing reputation for providing world-class measurement solutions. With a legacy of accurate, reliable and innovative products, the group prides itself on working with customers to achieve industry-best total solutions for optimum measurement or analysis of temperature, pressure, flow, and electrochemical variables.

About Invensys
Invensys is an automation, controls and process solutions Group working to create value for customers and investors. Our products, services, expertise and ongoing support enable intelligent systems to monitor and control processes in many different environments. The businesses within Invensys help customers in a variety of industries - including hydrocarbons, chemicals, oil and gas, power and utilities, rail, telecommunications, paper, food and beverage, dairy, pharmaceuticals and personal care - to perform with greater efficiency, safety and cost-effectiveness.

Process Systems (IPS) provides products, services and solutions for the automation and optimisation of plant operation in the process industries. APV specialises in process equipment engineered into systems and asset services for food, beverage, personal care, pharmaceutical and chemical clients. Eurotherm is a leading supplier of control and measurement instrumentation solutions and services to industrial and process customers. Rail Systems is a multinational leader in the design, manufacture, supply, installation, commissioning and maintenance of safety-related rail signalling and control systems. Climate Controls is a major provider of the components, systems and services used across the world to make commercial and residential environments safer, more comfortable and more efficient. Appliance Controls has the broadest system and component offering for the appliance industry worldwide.

The Invensys Group is headquartered in the UK and listed on the London Stock Exchange. With 35,000 employees operating in 60 countries, Invensys helps customers to improve their performance and profitability, building value for end users and shareholders alike.

I/A Series, Foxboro, Foxboro I/A Series, APV, Avantis, IMServ, SimSci-Esscor, Triconex, and Wonderware are trademarks of Invensys plc, its subsidiaries, or affiliates. All other trademarks are trademarks of their respective owners.

Posted by Industrial-Manufacturing at 05:03 AM | Comments (0)

FCI Vibratory Feeders Introduces Our Streamlined Business Approach to Fulfilling Industrial Automation’s Cap Feeder Needs

Since 1988, FCI Vibratory Feeders (www.vibratory-bowl-feeders.com) has offered premier cap feeder solutions for production lines across the country.

(PRWEB) April 23, 2005 -- Over the years, we have paid close attention to what we’ve been told by the engineers and production managers who have relied on us for design, modification, and service to their various types of conveyor feeders. As a result, we are now taking the process of integrating feeder applications another step further with the technological advantages of the internet. FCI Vibratory Feeders enables you to accelerate the phase of researching cap feeder costs and options by allowing you to request quotes online and obtain a response the same day.

The amount of teamwork and organization involved in managing, designing and implementing a production line is staggering. When such a wide range of factors is under consideration, our team understands the need to simplify some of the more basic tasks involved in developing solutions for production line service, additions, or adaptations. That is why FCI Vibratory Feeders is committed to providing information and service on your conveyor feeders or vibratory hoppers with as little effort on your behalf as you desire. This fact becomes immediately apparent when customers inquire about our products and services. By utilizing our online Quote Request, customers can submit the basic information concerning their feeding system requirements and expect a response within 24 hours. This way, customers won’t have to overextend their already preoccupied staff with such concerns as playing phone tag with sales representatives, or perpetually explaining their needs to a variety of parties.

To learn more about the ways in which we can assist your organization, please feel free to visit our website: www.vibratory-bowl-feeders.com. For specific information about vibratory hoppers or a particular cap feeder, you are welcome to submit an online Quote Request. In addition, you may either call or write to us:

FCI Vibratory Feeders
15235 Herriman Boulevard
Noblesville, Indiana 46060
Ph: 317/773-2040
FAX: 317/773-1494

We look forward to the opportunity of demonstrating our simplified method of presenting solutions.

FCI Vibratory Feeders … supplying the feeding system needs of industrial automation with superior products, service and business techniques.

Posted by Industrial-Manufacturing at 05:02 AM | Comments (0)

Zorich Technical Consulting and Publishing (ZTC) Partners with Steton Technology Group

Zorich Technical Consulting and Publishing (ZTC) has signed on as a channel partner for Steton Technology Group to work with them on the sale and implementation of the Steton Enterprise Quality and Safety Systems for the consumer product, food, chemical, medical device, biotech and diagnostic industry verticals. Current Steton clients include Carlson Restaurants, CNS/Foodsafe, Correction Corporation of America, General Mills, Hormel Foods Corporation, JohnsonDiversey, Kegel’s Produce, SkyWest Airlines, Sodexho, State of Louisiana, Sunny Fresh Division of Cargill, The Holland Inc. and Tyson Foods.

Brookfield, IL (PRWEB) April 22, 2005 -- Zorich Technical Consulting and Publishing (ZTC) has signed on as a channel partner for Steton Technology Group to work with them on the sale and implementation of the Steton Enterprise Quality and Safety Systems for the consumer product, food, chemical, medical device, biotech and diagnostic industry verticals. Current Steton clients include Carlson Restaurants, CNS/Foodsafe, Correction Corporation of America, General Mills, Hormel Foods Corporation, JohnsonDiversey, Kegel’s Produce, SkyWest Airlines, Sodexho, State of Louisiana, Sunny Fresh Division of Cargill, The Holland Inc. and Tyson Foods.

Principals John Zorich and Terry Cawley each have over 20 years experience in various industries. ZTC provides a number of consulting and training services to regulated industries. Their services include:
- GMP, Quality, QSR, Safety and ISO audits
- Regulatory, SPC and Statistics Training
- Compliance and Regulatory Consulting and Training
- Process Analysis and Optimization
- Mass Customization and Supply Chain Optimization
- Product Development and Enhancement
- Market Analysis and Development
- Training Curriculum and Course Development

Terry Cawley is also CEO of Athletique Inc. More information regarding Zorich Technical Consulting can be found by visiting their website at www.johnzorich.com

Steton Technology Group, established in 1996, is the leading provider of mobile data collection and reporting software. With the release of Steton Quality Suite (SQS) in 2000, Steton introduced technology that changed the way the entire profession of quality and safety specialists manage risk and monitor regulatory compliance. Instead of conducting inspections and audits using the traditional, but less efficient paper and pencil method, data collection can now be performed utilizing Steton’s software installed on handheld computer devices and desktop computers with the ability to upload the results, from anywhere in the world, at any time, into SQS.

More information on Steton can be found at www.steton.com.

Posted by Industrial-Manufacturing at 05:02 AM | Comments (0)

April 22, 2005

IBP Corporation Inc's Executive Management Team Authorizes the Early Release of ltcquickbid.com in Response to the Recent Press Release by GMA

The Executive Managment Team of IBP Corporation inc has authorized the early release of www.LTCquickbid.com. This Free, web based application, provides corporate shippers the ability to reduce their cost of transportation by utilizing Semi Tractor and Trailers that would normally be Deadheading.

(PRWEB) April 22, 2005 -- The Executive Management of IBP Corporation has authorized the early release of www.ltcquickbid.com in response to a recent press release by Grocery Manufacturers of America.

Triggering this early release were some of the topics of discussion during the recent conference held in Florida by Grocery Manufacturers of America. Several issues concerning utilization of "Deadhead Trailers" and the need to reduce the cost of transportation. The following statements were included in the press release issued by GMA after this conference.

Transportation
Carriers, retailers and manufacturers should work together to utilize the "untapped capacity" of deadhead trailers, regardless of the name on the side of the truck. Among the cost-saving options discussed, this idea was one that had the universal approval of supply chain executives from Wegmans Food Markets, ConAgra Foods, Welch Foods, Inc., and Total Logistics Control. Rick Blasgen of ConAgra said partnering across industries to utilize empty trailers would result in actual savings for the industry, especially in light of the driver shortage, increasing fuel costs and the finite capacity of the trucking industry.

Grocery Manufacturers of America is the world's largest association of food, beverage and consumer product companies. Led by a board of 42 Chief Executive Officers, GMA applies legal, scientific and political expertise from its more than 140 member companies to vital public policy issues affecting its membership. The association also leads efforts to increase productivity, efficiency and growth in the food, beverage and consumer products industry. With U.S. sales of more than $500 billion, GMA members employ more than 2.5 million workers in all 50 states.

Additional information on this press release can be found at: http://www.gmabrands.org/news/docs/NewsRelease.cfm?DocID=1488

IBP Corporation has been in Beta testing with ltcquickbid.com for the last six months and had planned on releasing this web application in June. This date has now been moved up to May 1st, 2005.

In a phone conversation with Cheryl Ballard, Director of Professional Services on April 20th 2005, the following statement was made "In effort to assist manufactures in reducing their shipping cost while increasing the revenues earned by transportation companies that are having to deal with increasing fuel surcharges on non revenue producing "DeadHead Miles" The Executive Management team has authorized the early release of www.ltcquickbid.com and the Free distribution of this Logistics Tool to all members of Grocery Manufacturers of America, GMA." Ms. Ballard also emphasized the fact that this web based application reduces the man hours spend by transportation managers obtaining quotes. According to Ms. Ballard, www.ltcquickbid.com allows the shipper to go on-line, fill out one form and have transportation companies submitting bids on the site. The days of hundreds of phone calls to find a trailer going the same direction are gone. www.ltcquickbid.com is a software property of IBP Corporation Inc.

For more information on this please visit the ltcquickbid.com site at Http://www.ltcquickbid.com or contact Cheryl Ballard at e-mail protected from spam bots

Other software titles serviced by IBP Corporation
www.icantrackit.COM
WWW.EPawnauction.com
www.ltcquickbid.com
WWW.ibpcorporationinc.COM

Posted by Industrial-Manufacturing at 07:15 AM | Comments (0)

ESS Receives DOD Authorization for the P-2™ Prescription Lens Insert System

Eye Safety Systems, Inc. (ESS) has released the P-2™ Rx Insert corrective vision system. The P-2 ™Rx Insert is designed for integration with the ESS ICE ™series spectacles and the ESS Profile NVG™ series goggles, both of which are already on the US Army and USMC lists of authorized eye protection. This corrective lens system is the first of its kind to be compatible across goggle and spectacle platforms, and has been authorized for use by both the US Army and the US Marine Corps.

Sun Valley, ID (PRWEB) April 22, 2005 -- Eye Safety Systems, Inc. (ESS) has released the P-2™ Rx Insert corrective vision system. The P-2 ™Rx Insert is designed for integration with the ESS ICE ™series spectacles and the ESS Profile NVG™ series goggles, both of which are already on the US Army and USMC lists of authorized eye protection. This corrective lens system is the first of its kind to be compatible across goggle and spectacle platforms, and has been authorized for use by both the US Army and the US Marine Corps.

The ESS P-2™ Rx Insert has a robust design with characteristics well suited for military applications:

- High-impact construction exceeds the impact requirements of MIL-STD-662F and MIL-PRF-31013.
- Rx lenses can be cut using conventional edging machines.
- Accommodates a range of corrections to +/- 11: well beyond the DOD standards.
- Includes a rigid storage case with both goggle and spectacle adapters.

The initial shipments of the P-2™ Rx Inserts will be supplied to Marines deploying for Operation Iraqi Freedom and Operation Enduring Freedom in December 2004 and January 2005.

The ESS P-2™ Rx Lens Insert (Model #EPPRSC-P) is available for immediate purchase through the National Stock Number system (4240-01-525-4784), AAFES/MCSS stores, GSA, and from ESS dealers worldwide. ESS recommends the use of polycarbonate as the corrective lens material because of its excellent impact resistance.

Contact Info:
Brian Ross
General Manager
e-mail protected from spam bots
208.726.4072

Posted by Industrial-Manufacturing at 07:14 AM | Comments (0)

Vigitron Hires New Regional Sales Manager for the Western US

Vigitron, Inc. announced today that it has appointed Mr. Steve Wilber as Regional Sales Manager for the Western United States.

(PRWEB) April 22, 2005 -- Vigitron, Inc. announced today that it has appointed Mr. Steve Wilber as Regional Sales Manager for the Western United States.

Mr. Steve Wilber has previously been with several leading Security Video Manufacturers, including Gyyr, Silent Witness, Syac, and Robot Research. He has worked in the Security Video and Broadcast industries for over 20 years. His experience includes Sales management, Application engineering, Marketing and Product management. Mr. Wilber's technical expertise lies in video signal processing technologies, which includes Multiplexing, Video transmission and Digital/Analog Video recording. In the past, he has conducted seminars internationally, being a featured speaker at the annual CCTMA, ISC functions as well as the University of Louisville. Mr Wilber has also authored many articles for Security trade magazines over the years. He can be reached at swilber@vigitron or (858) 484-5209 Ext. 208.

Vigitron, Inc. specializes in design and manufacturing of twisted pair video transmission devices. These products transmit video up to 6000 feet on unshielded twisted pair wires. They are a cost-effective alternative to coax cables and fiber optics for CCTV applications.

For additional information, please send email to: e-mail protected from spam bots

Posted by Industrial-Manufacturing at 07:13 AM | Comments (0)

Solinc Molds Image at Intermold Korea 2005

Solinc Co. exhibits Korea's high quality and technology at the Intermold Korea 2005 tradeshow which attracted buyers from around the world.

(PRWEB) April 22, 2005 -- Solinc, a South Korean Die and Mold company participated in the Intermold Korea Die and Mold Exhibition in Seoul, Korea, April 14th-18th, 2005. The Intermold Korea show is a bi-annual event that showcases Korean expertise and technology in all aspects of the Die and Mold industry.

Companies involved in 3D design software, measuring equipment, machinery, die and mold manufacturers, and related industries from all over the world exhibited in and attended the show. Solinc was there as an exhibitor with a booth featuring Plastic Injection Molds, Stamping Dies, 3D Die and Mold design services, 3D scanning/measurement equipment, and a lot of enthusiasm for the industrial market.

Following a successful showing at the K-show in Dusseldorf, Germany and the Euromold in Frankfurt last autumn, Solinc continues to mold Korea's image as a worldclass Die and Mold marketplace.With a large booth and unique selling points, Solinc gathered a lot of interest from overseas buyers looking for an Asian outsourcing network.

As Korea's reputation as a high quality international toolshop for dies and molds grows, Solinc intends to help fuel the growth with their own special brand of global networking and as a single source solution for overseas outsourcing.

For more information about Solinc Co., please visit http://www.solinc.net

Posted by Industrial-Manufacturing at 07:13 AM | Comments (0)

PRONTO ERP Selected by OTI for PoppaCorn

PRONTO ERP Selected by OTI for PoppaCorn

(PRWEB) April 22, 2005 -- OTI, Optimization Technology Inc., located in Mississauga Canada, has been developing and implementing ERP (Enterprise Resource Planning) systems since 1984. The Canadian VARs (Value Added Reseller) customer base appreciates the features built into their legacy systems which focused on individual manufacturing and distribution requirements. With the advent of GUI (Graphical User Interface) it became too difficult to add some of the new productivity features OTI and their clients wanted.

According to Dave Airey, VP of Sales and Marketing at OTI, “We started looking for a way to move our application to a GUI “look and feel,” but after two years of investigation it became obvious that it was not a practical goal. As an alternative we investigated upgrading our legacy application to a new product.”

Airey recently implemented PRONTO ERP for PoppaCorn.

OTI’s requirements for a new system revolved around their customers. After many years of custom changes, the legacy system was geared to client requirements.

Airey noted, “OTI’s initial search took us to the major ERP players, but none had the features we required to support our loyal customers.”

Finding an ERP System with Strong Functionality:

The search for a new ERP system ended when OTI was introduced to PRONTO North America (www.PRONTOerp.com). According to Airey, “We were introduced to Pronto and were immediately impressed with the rich functionality. One important feature was that Pronto is fully integrated. We had engineered our legacy system to be fully integrated so this was of major importance.”

The Rationale for PRONTO ERP:

- Fully integrated
- User definable options to tune the systems functionality
- A support system to back up our customers
- Functionality
- GUI look and feel built using a 4 GL tool
- Equipment rentals and tracking
- Service maintenance
- Both Manufacturing and Distribution in one package
- Email & Fax capability
- Multiple SQL platforms including MS SQL

Additional integrated features OTI customers’ are now showing interest include:

- CRM (Customer Relationship Management)
- Advanced Warehousing
- Scan Pack
- Plant Maintenance

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the distribution sector ERP leader. Tom Verzi, Director of Marketing and Development for PRONTO expressed his appreciation of Dave Airey’s integrity as a VAR.

Contact Information:
Dave Airey
OTI (Optimization Technology, Inc.)
e-mail protected from spam bots

Tom Verzi
PRONTO ERP
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 07:12 AM | Comments (0)

Centillion Announces Hong Kong Discussions for Sourcing Electronic Components

Manufacturing and Marketing company in discussions to acquire equity position in Hong Kong based component sourcing company.

(PRWEB) April 22, 2005 -- Centillion Industries Inc. (“Centillion”) (TSX Venture: CID) (http://www.centillionindustries.com) is pleased to announce that it is in discussions with a newly formed Hong Kong company to provide electronic component sourcing for its’ widening customer base. “Discussions are expected to result in an equity position being taken in the Hong Kong company”, said Wray Hodgson, president of Centillion. “By strengthening our off-shore sourcing capability, we will be able to better service additional market areas and augment existing ones”, he added.

The corporation expects off-shore sourcing to be a key role in the manufacture of a number of products including the Estari 2-VU dual touch screen laptop product, now undergoing manufacturing introduction. The 2-VU product is patented and marketed by Estari Inc., a Pennsylvania corporation, which offers specialized computing equipment aimed at the premium, high-end computing market.

About Centillion:
Centillion Industries is a marketing, distribution and manufacturer of purpose-designed components and manufacturing services for use in a broad range of commercial, consumer and industrial products.

For further information, please contact:
Wray A. Hodgson, President
Telephone: (416) 284-4242
E-mail: e-mail protected from spam bots

Garnet L. Bailey, Chief Executive Officer
Telephone: (403) 381-2288
E-mail: e-mail protected from spam bots

The TSX Venture Exchange Inc. does not accept responsibility for the adequacy or accuracy of this release.

(Not for dissemination in the United States of America)

Posted by Industrial-Manufacturing at 07:10 AM | Comments (0)

Eden Prairie, Minnesota to Host PRONTO North America Users Conference May 3 - 5

Peggy Smedley is the editor of Start Magazine and will be addressing the first annual PRONTO North America Users Conference on Thursday, May 5th. Smedley was recently profiled in the Wall Street Journal and authored Mending Manufacturing, How America Can Manufacture its Survival. She is an award-winning journalist.

(PRWEB) April 22, 2005 -- Peggy Smedley is the editor of Start Magazine and will be addressing the first annual PRONTO North America Users Conference on Thursday, May 5th. Smedley was recently profiled in the Wall Street Journal and authored Mending Manufacturing, How America Can Manufacture its Survival. She is an award-winning journalist.

Wednesday, May 4th, Thomas R. Cutler, CEO of TR Cutler, Inc., author of the Manufacturers Public Relations and Media Guide, Associate Editor of Industrial Connection, and Contributing Editor to InMFG magazine will be addressing the PRONTO North America Users Conference. Cutler is also the founder of the Manufacturing Media Consortium, a group of 2000 journalists writing about various aspects of manufacturing and industrial trends.

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the manufacturing, service, and distribution ERP leader.

Tom Verzi
PRONTO ERP
952-942-5858
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 07:10 AM | Comments (0)

April 21, 2005

Jim Johnson to Help "Remove the Mystery" for Companies Closer to Success

Veteran product specialist Jim Johnson is now making his 30 years of technical training available to all manufacturers needing to "remove the mysteries" of complex, yet feasible products. To do this, he's enlisted the help of the documentary/industrial film production company, Sound and Fury Productions, to offer unique, specialized training tools.

(PRWEB) April 21, 2005 -- Re-known technical trainer and product specialist, Jim Johnson, sees a very busy year ahead. He is occupied by a large number of manufacturing companies hurt by the disparity between a successful product and the end-users' understanding of what it is.

Stated concisely, "When you have a customer that's trying to buy something that is complex, a confused mind will always say 'no'".

Jim also suggests that the provider will often have no idea that their potential customer is confused. Additionally, quantities of sales are hampered by the inability of the field technicians to fully utilize what was accepted by the purchaser.

The remedy? A unique, down-to-earth approach to training technicians that Jim is famous for. This method is derived from knowing precisely what's going through the minds of people out on the field.

Jim's recent collaboration with Sound and Fury Productions produced a DVD designed to re-awaken the "Smartester", a revolutionary HVAC and heating systems measuring device. The goal was to make a DVD that served two functions. First, a groundbreaking trainer that "boils it down" for everyone to use. Second, a sales tool that removes any confusion about the product. Currently, Supco is enjoying the successful fulfillment of both functions.

Supco's product manager, Joel Graham, relates his experience with the team, "The production of our product demonstration video went very smooth and the final product was of excellent quality. Our sales team went through the initial batch of copies in the first month, and technicians who viewed the video were highly motivated to purchase the SmartTester."

As more companies see this opportunity for their own product lines, Jim Johnson's year may just get busier.

For more information, see the following link: http://www.soundandfury.tv/Pages/Jim%20Johnson2.html

Posted by Industrial-Manufacturing at 02:51 AM | Comments (0)

Leading Lighting Manufacturer, Sea Gull Lighting Products, Inc. Commits to Making Every Day, Earth Day

For the Environment, One Day is not Enough!

Riverside, NJ (PRWEB) April 21, 2005 -- Sea Gull Lighting Products, Inc. (www.SeaGullLighting.com) a leading manufacturer of functional and decorative lighting products, and Energy Star® Partner of the Year is reminding everyone that although Friday, April 22nd is the calendar date for Earth Day, individually and collectively we have the ability and power to make every day, Earth Day!

Business, organizations and consumers all play an important role in reducing harmful, greenhouse gas emissions and protecting our environment for future generations. For the past 15 years, Sea Gull Lighting has actively participated in the Energy Star program by dedicating its efforts to the development, refinement and marketing of hundreds of Energy Star qualified decorative lighting products.

According to Ace Rosenstein, Sea Gull Lighting vice president marketing and business development, "As a charter member of Energy Star since 1992 and honored Partner of the Year by the US Environmental Protection Agency and the Department of Energy, Sea Gull Lighting has boldly pioneered the advance of energy efficient lighting as well as dedicated its resources to the promotion of the technology’s many environmentally-friendly and cost-saving benefits.”

Sea Gull Lighting currently markets over 500 Energy Star qualified lighting and ceiling fan products in a vast array of styles, colors and finishes to complement a wide range of decorative and functional demands of designers, builders, architects and home owners. Once known for green hues, humming and flickering, Sea Gull Lighting has worked closely with the EPA and others to advance fluorescent lighting technologies and fixture style making the latest Energy Star qualified lighting fixtures virtually indistinguishable from their traditional incandescent counterparts.

"I invite you to join me in celebrating the 35th Anniversary of Earth Day and take the time to reflect on our nation’s environmental accomplishments and recommit to challenges of the future", said EPA's Acting Administrator, Steve Johnson.

This year marks the 35th Anniversary of “Earth Day”. On April 22, 1970, 20 million people across America celebrated the first Earth Day. It was a time when cities were buried under their own smog and polluted rivers caught fire. Now 35 years later, Earth Day is being celebrated around the globe. Through the combined efforts of the U.S. government, grassroots organizations, and citizens like you, what started as a day of national environmental recognition has evolved into a world-wide campaign to protect our global environment.

Did You Know?
- Energy Star qualified lighting provides more light while using 2/3 less energy than standard incandescent lighting.
- The average home is responsible for more air pollution than the average car.
- If one room in every US household was brightened by Energy Star qualified lighting, the annual energy savings would be equivalent to removing more than 8 million cars from the road for one year.
- It’s easy to see that Energy Star qualified fixtures are a stylish addition to any décor. What you can’t see is that they use less energy with bulbs that last 6 to 10 times longer than standard incandescent bulbs.
- The US demand for electricity is due to increase 28% over the next 20 years. And global demand will double by 2025.

About Energy Star®
Energy Star was introduced by the U.S. Environmental Protection Agency in 1992 as a voluntary market-based partnership to reduce air pollution through increased energy efficiency. Today, the co-sponsored program between the U.S. Department of Energy and U.S. Environmental Protection Agency, offers businesses and consumers energy-efficient solutions to save energy, money and help protect the environment for future generations. More than 7,000 organizations have become Energy Star partners and are committed to improving the energy efficiency of products, homes and businesses.

About Sea Gull Lighting Products, Inc.
Headquartered in Riverside, New Jersey, Sea Gull Lighting Products, Inc., is a leading manufacturer and marketer of decorative and functional lighting as well as ceiling fans for residential, commercial and architectural applications. The 86-year-old company provides more than 3,500 product designs spanning 15 categories to a multi-national network of electrical distributors, lighting showrooms, furniture and gift specialty stores as well as various niche markets. These products are marketed worldwide under the Sea Gull Lighting®, Ambiance® Lighting Systems®, Monte Carlo® Fan Company, PGA Tour® Home Collection and Carolyn Kinder Lighting brand names. Sea Gull Lighting is also a proud partner of the EPA’s Energy Star® Program and was recently named 2005 Energy Star Partner of the Year. This is the second consecutive year that the company has earned this honor.

For more information regarding Sea Gull Lighting Products, please visit www.seagulllighting.com www.seagulllighting.com/EnergyStar or contact William Chelak at 1-732-541-2971 or e-mail protected from spam bots.

Posted by Industrial-Manufacturing at 02:50 AM | Comments (0)

Employers Baffled by How to Legally Handle Military Leave Requests: BLR's Free Audio Conference Explains the ins and outs

When employees have to take military leave their employers face serious responsibilities under the Uniformed Services Employment and Reemployment Rights Act (USERRA). Business & Legal Reports Inc. is offering a free audio conference recording featuring two expert attorneys who explain the ins and outs of this important and confusing law.

Old Saybrook, CT (PRWEB) April 21, 2005 -- It’s hard on the employee, who has to leave family and job for a military leave. But when a worker gives notice that he must go on active duty, the employer suffers too.

Fortunately employers can avoid the pitfalls of the Uniformed Services Employment and Reemployment Rights Act (USERRA) by listening to a recent audio conference sponsored by Business & Legal Reports (BLR). It’s free with registration, and helps employers understand their responsibilities to employees under the federal law for military leave in plain English.

Employers must be up-to-date with USERRA requirements because employees who feel that their USERRA rights have been violated can go directly to court - without first filing an administrative action. If an employer makes a mistake, for example missing the latest notification requirements, it may have to pay huge sums, including back pay, attorney’s fees, and even double damages!

This streaming audio conference features two lawyers who are experts in advising employers on USERRA compliance – Steve Bernstein and Clancy Vettel Mendoza, a partner and associate, respectively, in the Atlanta office of Fisher & Phillips. They provide practical tips on how to avoid the pitfalls under this oft-misunderstood law. For instance, the requirements for healthcare insurance coverage depend on how long the employee is away: Those absent for 30 or fewer days are entitled to employer-sponsored coverage under same terms as when they were working. Those on leave for more than 30 days are generally entitled to COBRA-type continuation benefits.

Employers will benefit from practical guidance like this in this 90-minute conference, which includes a 60-minute presentation and a 30-minute question-and-answer session. Access it here: http://www.blr.com/82008400/PRS12

This audio conference was originally recorded on March 17, 2005.

About BLR
Old Saybrook, Conn.-based BLR produces plain-English compliance and training resources for HR, compensation, safety, and environmental managers. For more information about other audio conferences and a free catalog, call 800-727-5257 or visit www.BLR.com.

Contact:
HR.BLR.com Managing Web Editor Kevin Flood
860 510-0100 x 2283

Posted by Industrial-Manufacturing at 02:49 AM | Comments (0)

Self-cleaning Filters: A Bottom Line Boosting Alternative for Fine Chemical and Pharmaceutical Industries

With the hidden, ongoing costs of disposable filter media (industrial bags and cartridges) as significant as they are, the trend in the fine chemical and pharmaceutical industry is now toward self-cleaning filtration with minimal need for labor.

(PRWEB) April 21, 2005 -- With the hidden, ongoing costs of disposable filter media (industrial bags and cartridges) as significant as they are, the trend in the fine chemical and pharmaceutical industry is now toward self-cleaning filtration with minimal need for labor.

Variations of this, such as disc-cleaned filters (DCF), and magnetically couple filters (MCF), are helping producers of fine chemical products improve profit and worker safety while reaching waste minimization goals, as operations become more efficient.

Though an up-front capital expense, manufacturers of fine chemical-based products and their engineers are now realizing the extent that self-cleaning filters add to the bottom line. To start, a self-cleaning filter system automatically cleans itself while in use, allowing:

- Single piping arrangement
- Minimal valving
- Fewer connections, instead of complex, redundant systems.

This translates into lower total system cost and reduced waste.

Information
www.RPAprocess.com
e-mail protected from spam bots
+1 269 323 1313.

Posted by Industrial-Manufacturing at 02:49 AM | Comments (0)

TrendWatch Graphic Arts Reports: Computer Integrated Manufacturing is Breeding Fear - But Not Investment

TWGA looks at the most recent survey data on CIM as a sales opportunity, CIM as a business challenge, and CIM as a planned investment. Data are analyzed in light of related technology, such as “networked digital infrastructure” and “building a JDF workflow.”

NEW YORK (PRWEB) April 21, 2005 -- New survey numbers for Computer Integrated Manufacturing (CIM), released by TrendWatch Graphic Arts, show that perception of CIM as a sales opportunity and planned investment in CIM are lower today than six months ago. But the same survey also shows that concerns about building a CIM infrastructure, and understanding and integrating the CIM concept, as business challenges have doubled over the same time period. What does this mean for the industry?

These are the issues being tackled in TrendWatch GA’s latest Special Report, “Computer Integrated Manufacturing: Time to Call 911?” In its pages, TWGA looks at the most recent survey data on CIM as a sales opportunity, CIM as a business challenge, and CIM as a planned investment. Data are analyzed in light of related technology, such as “networked digital infrastructure” and “building a JDF workflow.” The report also includes detailed data on respondents’ attitudes toward, and current levels of adoption of, CIM taken from the TWGA’s 2004 CIM report.

Data are provided in historical fashion, with the current data compared to data from the prior two surveys in a side-by-side comparison.

Notes Heidi Tolliver-Nigro, TrendWatch Graphic Arts analyst and author of the report, "While much of the data in the current report may be alarming, especially to technology vendors (printers may actually breathe a sign of relief!), the outlook for CIM is not dire. In fact, we believe CIM to be an extremely important -- and perhaps inevitable -- technology for the long-term. In the meantime, these numbers provide an accurate snapshot of where CIM in the graphic arts industry stands today, and provide a window into where greater industry education needs to be done and what will be required before CIM can take hold on a widespread basis. It also provides a window into where the current pockets of adoption and opportunity lie."

News Highlights...
- 1% of graphic arts firms see CIM as a sales opportunity -- down from 4% one year ago;
- 20% of these same firms see CIM as a business challenge, nearly triple six months earlier.
- 5% of graphic arts firms have taken steps to incorporate CIM into their workflows, rising to 23% of periodical printers;

Availability
"Computer Integrated Manufacturing: Time to Call 911?" is available for purchase by visiting the secure TrendWatch Graphic Arts eStore online at www.trendwatchgraphicarts.com or by phone at 866-873-6310. The price for the 111-page report is $995. TrendWatch Graphic Arts eStore customers can download this report in PDF Acrobat format immediately after purchase.

Editor's Note
Additional information pertaining to each report is available for editorial purposes. Please make inquiries directly to Judie Ryer.

About TrendWatch Graphic Arts
TrendWatch Graphic Arts specializes in the assessment of trends and changes in graphic communications markets by providing timely and strategic information, hard-hitting market analysis and concise expert opinion. The reports have earned the reputation for containing the most reliable and timely industry intelligence in the graphic arts and graphic design marketplaces.

Posted by Industrial-Manufacturing at 02:47 AM | Comments (0)

Longmont Area Economic Council Honors Cornerstone Award Recipients; High Country Millwork, Marvell Semiconductor, MicroPhage, Inc. & Teknovation Receive Awards

The Longmont Area Economic Council (LAEC) held its 6th annual Cornerstone Luncheon on Wednesday, April 20th at the Radisson Conference Center in Longmont. The LAEC honored four companies at the event, which is designed to recognize new and expanding primary employers in the Longmont area.

Longmont, CO (PRWEB) April 21, 2005 -- The Longmont Area Economic Council (LAEC) held its 6th annual Cornerstone Luncheon on Wednesday, April 20th at the Radisson Conference Center in Longmont. The LAEC honored four companies at the event, which is designed to recognize new and expanding primary employers in the Longmont area.

This year more than 200 Longmont business and community leaders gathered to recognize and celebrate companies that have started, grown or moved into the area within the past year. Three companies were honored with Cornerstone awards, and one received the CTEK Longmont Award.

2005 Cornerstone Award Recipients include:
High Country Millwork (www.highcountrymill.com), a custom woodworking company that provides product for both residential and national retail projects. In 2004, High Country Millwork relocated to the Longmont area along I-25 with the purchase of an 86,820 square foot facility at 4076 Specialty Place. High Country employs 49 people.

Marvell Semiconductor (www.marvell.com), a semiconductor company that is the world’s leader for system on a chip (SOC) integrated circuits. In 2004, Marvell more than doubled its Longmont employment base to 36 people. The company also doubled the square footage it occupies, to 16,000 square feet at 1951 S. Fordham Road.

MicroPhage, Inc., (www.microphage.com), Microphage, Inc., a startup biotech firm specializing in rapid pathogen detection systems. MicroPhage moved into 5,033 square feet at 2400 Trade Center Avenue in 2004, where it employs seven people.

Teknovation (www.teknovation.com) was chosen to receive the 2005 CTEK Longmont Award. Teknovation provides the hardware, software and services to acquire, process, manage and deliver real-life multimedia content for the next generation of security, surveillance and enterprise business intelligence through the integration of video, sound and transactional data.

The CTEK Longmont Award is designed to recognize entrepreneurial excellence in the Longmont area. Entrepreneurs comprise a significant portion of the Longmont economy. The recipient company is chosen by the Longmont Venture Center in recognition of the risk, commitment and energy necessary for entrepreneurs to succeed.

Platinum Sponsors for this year’s Cornerstone luncheon included Amgen, the Longmont Daily Times-Call and Workforce Boulder County. Gold sponsors included Flatirons Bank, Wells Fargo and Xcel Energy.

Previous Cornerstone honorees have included Seagate, Amgen, Xilinx, Intrado and others.

About the Longmont Area Economic Council
The Longmont Area Economic Council exists for the sole purpose of keeping the Longmont area economy strong. This is accomplished specifically by "actively supporting the creation and preservation of quality primary jobs." Primary employers are those who sell the majority of their goods and services outside the region. LAEC is a public/private partnership, governed by a Board of Directors made up of representatives from primary employers, the City of Longmont, and the business community at large. For more information, call (303) 651-0128, email e-mail protected from spam bots, or visit www.longmont.org.

Posted by Industrial-Manufacturing at 02:47 AM | Comments (0)

ETO ERP Selection: Key for ETO Manufacturers

ETO ERP Selection: Key for ETO Manufacturers

(PRWEB) April 21, 2005 -- Enterprise Resource Planning (ERP) systems offer great benefits to engineer-to-order (ETO) companies looking to increase productivity and decrease cost. According to TR Cutler, spokesperson for the ETO Institute, “These benefits come as a result of a successful implementation, but not every implementation is successful.” Cutler asserts that, “One reason some implementations are not successful is the selection of the wrong system.”

The ETO Institute has just published a white paper, “Why Do Companies Choose the Wrong System?” This document is written with engineer-to-order companies in mind. It highlights the problems facing ETO companies trying to find and evaluate a new ERP system. The while paper provides some time and simple steps companies can take to reduce the chances of making a critical mistake. (www.etoinstitute.org)

Cutler, who authors regular columns for Industrial Connection magazine (www.industrialconnection.net) and InMFG magazine (www.inmfg.com) is looking for case study profiles of ETO manufacturing companies and their ERP experiences. “The good, the bad, the ugly. I want to know what ETO manufacturers think about the ERP selection process, what companies have served them well and which have not. This will provide an interesting profile for the members of the ETO Institute.”

The ETO Institute specifically highlights some of the problems ETO manufacturers face when searching for an ERP system. Go to www.etoinsititute.org and learn more. Registration is free of charge and more than a thousand ETO manufacturers are expected to join in 2005.

Thomas R. Cutler
ETO Institute
954-486-7562
www.etoinstitute.org
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:46 AM | Comments (0)

Small Manufacturers Approve Leasing Manufacturing Software

Small Manufacturers Approve Leasing Manufacturing Software

(PRWEB) April 21, 2005 -- E-Z-MRP, the leading manufacturing software system for small manufacturers, announced effective April 15th, there will be a new pricing and product structure. According to Rocky Smolin, founder of Beach Access Software, makers of E-Z-MRP, “We see a distinction between those small manufacturers with less than five hundred parts in material resource planning, and those with a need for unlimited part numbers.”

Smolin noted that some manufacturers will start with the under 500 parts version of E-Z-MRP, priced at $2995, and grow into the new unlimited version, priced at $9800. Beach Access Software credits the $2995 for customers who later choose to upgrade. Other small manufacturers who presently have more than five hundred part will start right away with the E-Z-MRP Unlimited version.

To accommodate the new pricing structure E-Z-MRP offers a Leasing program that ensure a rapid Return-on-Investment.

•Lease E-Z-MRP with two full years of support for just $169.96 per month.
•Lease E-Z-MRP Unlimited with two full years of support for just $495.00 per month.

For more information visit the company’s web site: http://www.e-z-mrp.com, or call 858-259-4334.

Small manufacturers with more than one hundred parts can no longer manage the manufacturing process on an Excel spreadsheet. Since more than 84% of all manufacturers have less than fifty employees, there is a remarkable opportunity for cost-effective manufacturing systems like E-Z-MRP. Despite the extensive media coverage regarding ERP (Enterprise Resource Planning), in most cases these small manufacturers do not require all the functionality offered, nor can many afford the price point.

Somewhere between Excel and ERP is the core process for most manufacturers. By offering the two versions of E-Z-MRP, no small manufacturer will be required to purchase more software than actually needed, while still having the ability to grow into the E-Z-MRP Unlimited version.

The EZ MRP package includes a full-featured Bill of Materials processor, plus a material planning and tracking module which tracks all sales orders, forecasts, work orders (planned, firm, and released), purchase orders, shortages, raw materials and finished goods inventories. It also records a complete audit trail on all inventory transactions. Also included is a physical inventory function and a purchase order module for printing purchase orders.

E-Z-MRP runs on any Windows-based PC or network, and requires only Access 2000, Access XP, or Access 2003 to run. No on-site or remote training is required. A comprehensive user manual with tutorials provides all the required instruction.

Beach Access Software
Rocky Smolin
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:46 AM | Comments (0)

Pronto ERP Selected by OTI for Frank Brasier & Sons

Pronto ERP Selected by OTI for Frank Brasier & Sons

(PRWEB) April 21, 2005 -- OTI, Optimization Technology Inc., located in Mississauga Canada, has been developing and implementing ERP (Enterprise Resource Planning) systems since 1984. The Canadian VARs (Value Added Reseller) customer base appreciates the features built into their legacy systems which focused on individual manufacturing and distribution requirements. With the advent of GUI (Graphical User Interface) it became too difficult to add some of the new productivity features OTI and their clients wanted.

According to Dave Airey, VP of Sales and Marketing at OTI, “We started looking for a way to move our application to a GUI “look and feel,” but after two years of investigation it became obvious that it was not a practical goal. As an alternative we investigated upgrading our legacy application to a new product.”

Airey recently implemented PRONTO ERP to Ontario-based Frank Brasier & Sons.

OTI’s requirements for a new system revolved around their customers. After many years of custom changes, the legacy system was geared to client requirements.

Airey noted, “OTI’s initial search took us to the major ERP players, but none had the features we required to support our loyal customers.”

Finding an ERP System with Strong Functionality:
The search for a new ERP system ended when OTI was introduced to PRONTO North America (www.PRONTOerp.com). According to Airey, “We were introduced to Pronto and were immediately impressed with the rich functionality. One important feature was that Pronto is fully integrated. We had engineered our legacy system to be fully integrated so this was of major importance.”

The Rationale for PRONTO ERP:
-Fully integrated
-User definable options to tune the systems functionality
-A support system to back up our customers
-Functionality
-GUI look and feel built using a 4 GL tool
-Equipment rentals and tracking
-Service maintenance
-Both Manufacturing and Distribution in one package
-Email & Fax capability
-Multiple SQL platforms including MS SQL

Additional integrated features OTI customers’ are now showing interest include:
-CRM (Customer Relationship Management)
-Advanced Warehousing
-Scan Pack
-Plant Maintenance

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the distribution sector ERP leader. Tom Verzi, Director of Marketing and Development for PRONTO expressed his appreciation of Dave Airey’s quality and customer service dedication.

Contact Information:
Dave Airey
OTI (Optimization Technology, Inc.)
e-mail protected from spam bots

Tom Verzi
PRONTO ERP
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:44 AM | Comments (0)

PRONTO North America Users Conference in Eden Prairie Minnesota May 3 - 5

PRONTO North America Users Conference in Eden Prairie Minnesota May 3 - 5

(PRWEB) April 21, 2005 -- Peggy Smedley is the editor of Start Magazine and will be addressing the first annual PRONTO North America Users Conference on Thursday, May 5th. Smedley was recently profiled in the Wall Street Journal and authored Mending Manufacturing, How America Can Manufacture its Survival. She is an award-winning journalist.

Wednesday, May 4th, Thomas R. Cutler, CEO of TR Cutler, Inc., author of the Manufacturers Public Relations and Media Guide, Associate Editor of Industrial Connection, and Contributing Editor to InMFG magazine will be addressing the PRONTO North America Users Conference. Cutler is also the founder of the Manufacturing Media Consortium, a group of 2000 journalists writing about various aspects of manufacturing and industrial trends.

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the manufacturing, service, and distribution ERP leader.

Tom Verzi
PRONTO ERP
952-942-5858
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:44 AM | Comments (0)

Sofa Offers Storage Solution for Clutter

Ready to assemble sofa offers hidden storage to conquer living room clutter.

Fort Wayne, IN (PRWEB via PR Web Direct) April 20, 2005 -- Whether gathered on the sofa around the fireplace or big screen TV, the living room is the heart of your home. But if the “living” space has vanished from your living room, replaced by life choking clutter, you’re not alone.

While those in condos, apartments, smaller houses, and those with kids may feel the sharpest pinch, no one is immune. The clutter of daily living sees to that - mail, magazines, newspapers, and books; CDs, DVDs, video games; not to mention toys, paperwork, and kid’s art - all seem to multiply despite our best efforts to clear some living space.

Fear not. The way underbed storage has helped solve the shortage of bedroom space, those needing safe, convenient storage closer than the closet or next room will find the new category of ready-to-assemble (RTA) sofas neatly solves the problem.

John Vessely, for instance, needed a sofa, chair, and ottoman for his Valley Stream, N.Y., home, and a solution for his teenage son’s video and DVD collection that perennially piled up on the TV and spilled onto the floor.

After Internet research, Vessely discovered RTA upholstered furniture that made his existing space “do double duty.” Now his son’s entire video and DVD collection is neatly organized in hidden storage under the sofa cushions.

Not only are the “secret” compartments fun to show friends, but also the wood lids and bottoms under the cushions provide dust protection and surprising holding capacity. A single sofa, in fact, can store 65 CDs, 15 videos, 22 books, 3 pillows, 1 blanket, and 10 action heroes. Because the manufacturer Vessely bought from, Home Reserve (www.homereserve.com), sells RTA sofas direct to customers via the Internet, he got his sofa for about 50% less than retail for $299.

While taking back your living room, via the sofa, may seem like a small victory in the battle against household clutter, winning here will return much needed comfort and breathing space to the most used room of the house.

Contact:
Blaine Wieland
Home Reserve
800-482-2712
www.homereserve.com

Posted by Industrial-Manufacturing at 02:43 AM | Comments (0)

NEW Alliback(TM)Product Made to Enjoy the Great Outdoors

Booth international LLC announces it's Newly discovered umbrellachair Alliback(TM). It was made for one to enjoy the great outdoors while being protected from the dangerous UV rays.

(PRWEB) April 20, 2005 -- Tamme Booth, founder of Booth International LLC, formed her company as a result of her innovative product the Alliback(TM) chair. The company is based in NY but, manufactures it's product in china. Alliback was birthed by Tamme whose concern for others who have challenges with the outdoors UV rays and believe they needed to be protected in return.

According to tamme, "I'm not just the owner of Booth International but, a registered nurse. I believe the outdoors is for everyone and none should be deprived of enjoying the outdoors."

Alliback(TM) is ideal for use at, picnics, the beach, poolsides, the lake, camping and the outdoors.

Alliback4u.com features the product and it's various characteristics and features for one to enjoy, as well as its current market. It's features include, protable collapsible chair, umbrella attachment to back of chair, effective sheilding, collapsible state, various colors and patterns and carrying case. It's made of durable aluminum and metal to hold and support up to three hundred pounds. The umbrella post is secured to back of chair for support and sun sheilding. This product is made to last for the great outdoorsman. Alliback was featured in the NIKKEI marketing journal and featured as the product of the month in Japan and Invention connection Cyberspace as invention of the month.

Posted by Industrial-Manufacturing at 02:42 AM | Comments (0)

Quickparts Expands to New Facility to Accommodate Growth

Quickparts announced that it has completed its expansion to the company's new facility. This expansion supports the company's continued rapid growth, as evidenced by its selection to the Inc. 500 list of the fastest growing private companies in America.

Atlanta, GA (PRWEB) April 20, 2005 -- Quickparts, the leading provider of custom-manufactured plastic and metal parts, today announced that it has completed its expansion to the company's new facility. This expansion supports the company's continued rapid growth, as evidenced by its selection to the Inc. 500 list of the fastest growing private companies in America. Quickparts' new headquarters will be located at 219 Perimeter Center Parkway, Suite 400 in Atlanta, Georgia.

Quickparts specializes in providing instant online quotes and custom manufacturing services for product development companies looking to outsource the fabrication of plastic and metal parts from 3D models.

“We needed to expand our infrastructure, including the move to our new 16,000 sq. foot facility, to support several growth initiatives, including the deployment of QuickTool Express™, our new rapid injection molding process.” said Ron Hollis, President & CEO of Quickparts.

“2004 was a year of milestones for Quickparts: celebrating 5 years of fast-growth business, crossing over 100,000 instant quotes, and being named to the Entrepreneur Hot 100 and Inc. 500 list. As we look to 2005 and the future, we remain committed to expansion as demanded by our growing customer base,” Hollis said.

QuickTool Express™, launched in January 2005, is the latest manufacturing process from Quickparts that leverages the company's patent-pending QuickQuote® geometric analysis technology. Other instantly quoted offerings include: Stereolithography (SLA), Selective Laser Sintering (SLS), Fused Deposition Modeling (FDM), and Cast Urethanes. The company also offers CNC Machined Parts, Sheet Metal Prototypes and Metal Castings with quotes provided in 24 hours or less.

To find out more about Quickparts, please visit www.quickparts.com or call 1-877-521-8683.

About Quickparts
Quickparts provides custom manufacturing services for engineers and designers looking to create plastic and metal parts from 3D CAD (computer-aided design) models. With its proprietary QuickQuote® geometric analysis software, Quickparts is able to provide product designers with an 'instant online quote' for the manufacturing of their custom parts from prototype to production. Services include: Rapid Prototypes (SLA, SLS, FDM), Cast Urethanes, Quickturn Injection Mold Tooling and Parts (QuickTool Express & QuickTool Pro), Sheet Metal Parts, Metal Castings, and CNC Machined Parts. A Quickparts Project Manager ensures parts are delivered to the customer’s specifications within the desired timeframe.

Contact:
Sameer Vachani
Director of Marketing
1-877-521-8683 x. 203
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:42 AM | Comments (0)

Inpro/Seal Revises Its Introduction to Bearing Isolators Literature to Make it Even More Valuable to Plant Maintenance People

This is a reference, written by the inventor of the product and is worded in easy to understand language. It includes important and useful information on the evolution of the bearing isolator, including: how and why it was invented; how it works; how and why contact seals fail in a short period of time; how to eliminate catastrophic failure; how to reduce power consumption in rotating equipment; costs; maintenance; configurations and much more.

Rock Island, IL (PRWEB) April 20, 2005 -- Inpro/Seal Company has announced a revision to its highly successful brochure, “Introduction to Bearing Isolators, A short lesson in bearing isolation”.

Valuable Information
Authored by David C. Orlowski, well known for his knowledge of bearings, bearing protection and tribilogy, the literature is a valuable source of information and useful tool to anyone involved in the management, maintenance, repair and operations (MRO) of motors, machine tool spindles, turbines, fans, gear boxes, paper machine rolls, pumps and other types of rotating equipment used in industrial/process plants.

Authored by Industry Expert
President and founder of Inpro/Seal Company, Orlowski has spent the last 41+ years working on ways to enhance and extend the service life of rotating equipment. In 1977, he received patent protection (#4,022,479) for the bearing isolator. (He also invented the term “bearing isolator” in the process.) In addition, he holds more than 40 other isolator related patents, some of which go out until 2018 and longer.

Importance of Research and Feedback
According to Orlowski, “For over 27 years Inpro/Seal has never stopped developing ways to help companies increase productivity and improve their bottom line. To this end, our manufacturing complex is the largest of its kind in the world devoted to the engineering, research, improvement, testing and manufacture of bearing isolators.”

Orlowski continued, “A very important aspect of our new technologies is direct end user feedback. Last year, we completed a two-year end-user based research project that was conducted on a market-by-market, application-by-application analysis. The end result of this research was that end users wanted to know a lot more about bearing isolators. “

“Whether they used bearing isolators or not, whether or not they read our literature or advertising messages, the majority of the respondents simply stated that they wanted to know more about the basics of the product. As a direct result of this research, we developed a brochure, “Introduction To Bearing Isolators, A short lesson in bearing isolation”.

Orlowski concluded by saying that, “Based on feedback, request and need, we have revised our reference to include additional technical information, artwork and drawings. It represents a major investment on our part to inform end users how bearing isolators eliminate the root cause of rotating and related equipment failure - moisture, dirt and abrasives contaminating the bearing environment.”

Unique Reference
What makes this reference unique is that it is written by the inventor of the product in easy to understand language. It includes important and useful information on the evolution of the bearing isolator, including: how and why it was invented; how it works; how and why contact seals fail in a short period of time; how to eliminate catastrophic failure; how to reduce power consumption in rotating equipment; costs; maintenance; configurations and much more.

What is a Bearing Isolator
A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they don’t separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in.

Inpro/Seal protected bearings have been known to run 150,000 hours (17 years) or more, eliminating the need for continual maintenance and repair. Documented cases show that a plant can easily double the mean-time-between failure (MTBF) and reduce maintenance costs by at least half, with users reporting an extremely high ROI (Return On Investment). Bearing isolators are installed by OEM’s, retrofitted on existing equipment or specified by end users. Approximately 1.6 million have been installed and most are still in operation in process plants around the world.

Inpro/Seal Products
Recent developments include: the only product that protects rolling element bearings on paper machines from the wet end to the dry end; IEEE-841 motors that use bearing isolators as part of their specification and set the standard for motor bearing protection; the VBX-H Series that protects machine tool spindle bearings from coolant, chips, humidity and heat; the OM 32 that optimizes oil mist applications by eliminating stray emissions, environmental and housekeeping issues; and the Air Mizer™- PS, a dry sealing system provides a positive seal in applications where dry particulates, powders and bulk solids are handled, processed, packaged and stored.

About Inpro/Seal
Inpro/Seal Company is the originator and the number one manufacturer of bearing isolators, used to protect motor and pump bearings, machine tool spindles, turbines, fans, gear boxes, paper machine rolls and many other types of rotating equipment. Additional applications include the handling, processing, packing and storage of dry particulates, powders and bulk solids.

As the recognized global leader in bearing isolator technology, Inpro products are marketed to the petroleum, refining, nuclear, power generation, metalworking, food processing, grain processing, chemical, water, wastewater treatment, metalworking, automotive, hydrocarbon processing, HVAC, pulp and paper, mining, mineral, ore processing and general industrial markets around the world.

To receive a copy of – “Introduction to Bearing Isolators”, contact: Inpro/Seal Company, P.O. Box 3940, Rock Island, Illinois 61204. Phone numbers are: (800) 447-0524 or (309) 787-4971. Fax number is: (309) 787-6114. Website: www.inpro-seal.com or www.bearingisolators.com

From:
The Mark Baker Company
4124 Quebec Avenue N
Minneapolis, MN 55427
Mark Baker (763) 537-7540

For:
Inpro/Seal Company
P.O. Box 3940
Rock Island, IL 61204
David C. Orlowski
(309) 787-4971
(800) 447-0524

Posted by Industrial-Manufacturing at 02:40 AM | Comments (0)

X-Digital Systems Deploys Linux-based DVB-IP Encapsulator Using Digital Media Processor Solution

X-Digital Systems Inc. (XDS), today announced it has deployed a Linux-based DVB-IP Encapsulator (IPE) using the TMS320DM642 digital media processor from Texas Instruments Incorporated (TI). Leveraging TI’s high-performance, peripheral-rich digital media processor, X-Digital built a media distribution system providing customers with the ability to directly broadcast MPEG content stored on a server into DVB transmission systems currently used in the media broadcast environment.

San Diego, CA (PRWEB) April 20, 2005 -- X-Digital Systems Inc. (XDS), a technology innovation and licensing company focused on broadcast transmission systems, today announced it has deployed a Linux-based DVB-IP Encapsulator (IPE) using the TMS320DM642 digital media processor from Texas Instruments Incorporated (TI). Leveraging TI’s high-performance, peripheral-rich digital media processor, X-Digital built a media distribution system providing customers with the ability to directly broadcast MPEG content stored on a server into DVB transmission systems currently used in the media broadcast environment.

“Using TI’s DM642 device, we have created a low-cost solution allowing the distribution of multimedia content over DVB broadcast networks. Our IPE technology will allow USEN Broadcast to operate their network more efficiently while giving users added features,” said Ian Lerner, president, XDS. “We are excited to have deployed this technology into USEN’s system, which services over 1.3 million home and business subscribers. In early 2006 this system will be expanded into the mobile networks throughout Japan.”

"We are pleased that X-Digital has chosen to build its media distribution system for the Japanese DVB-IP broadcast market utilizing TI’s digital media processors,” said Charlie Gonsalves, business development manager for the Streaming Media group, Texas Instruments. “X-Digital has demonstrated a strong commitment to this market with the development of its Linux-based IPE.”

"The presence of X-Digital Systems Inc. is imperative to the broadcast and multimedia marketplace in Japan. Its broad portfolio of high-performance DVB broadcast systems and its unique customised solutions have changed the entire system architecture of USEN Corp., in that, it ensures USEN's reliable, efficient digital broadcast needs. We are extremely proud and excited to represent X-Digital Systems Inc. in Japan", said Masahiko Shimada, president of MBK Microtek Inc., a company promoting X-Digital's network solutions to Japanese market.

About X-Digital Systems
X-Digital Systems Inc. is a technology development and licensing company with over 10 years of expertise in the IP networking and data distribution fields. X-Digital has developed and licensed communications products in the US and Japan. X-Digital provides its customers complete solutions including back office systems in addition to the distributed client systems. For more information, please see www.xdigital.com.

About USEN
USEN Corporation is a leading company providing broadcasting services, and has expanded into other areas including retail businesses, the karaoke business, Internet services, and the broadband business. For more information, visit the USEN Web site http://www.usen.com.

About MBK Microtek Inc.
MBK Microtek Inc. was established and organized in 1985 as the 100% subsidiary company of Mitsui & Co., Ltd. The Company's mission is to bring value to the semiconductor/LCD manufacturing industry, as well as to develop an alliance with leading electronics, IT and solution business segments worldwide.

X-Digital Systems Inc. Contact:
Ian Lerner, President
Tel: (858) 452-2010
e-mail protected from spam bots

Trademarks
All trademarks are the property of their respective owners.

Posted by Industrial-Manufacturing at 02:39 AM | Comments (0)

Storstac Offers Portable Storage Solutions to the Construction Industry

Storstac keeps construction companies happy with the sale and rental of secure and durable portable storage containers.

Mississauga, Ontario (PRWEB) April 20, 2005 -- Need more storage space on the job site? Storstac carries a number of tough, weatherproof, and secure portable storage containers to suit your temporary or permanent storage needs.

There are many benefits to using portable storage containers, particularly in the construction industry. For one, they are completely portable, meaning they can be delivered to the job site quickly and placed in a convenient location that is handy to the work being done. Also, once work is completed in one location, the storage container and all its contents can be easily relocated to a different job site where it is needed.

The construction of a standard shipping container lends itself to be an extremely strong, cost-effective structure that is water-tight and vandal-proof. "Using portable storage containers from Storstac is the ideal way to ensure that at the end of the day your tools and special equipment will be secure and kept in good shape," said Vincent Ruggiero, Storstac President.

About Storstac
Storstac deals in the sales, rentals and modifications of new and used shipping containers and portable storage units. The company is dedicated to providing its customers with excellent quality products and service. For more information, please visit http://www.storstac.com.

Posted by Industrial-Manufacturing at 02:38 AM | Comments (0)

New Tool for In-Process Deburring of Cross-Drilled Holes

The problems associated with hand deburring cross-drilled and back-faced holes have been eliminated by the Orbitool, now available in the UK from Finishing Techniques Ltd. The Orbitool is the only in-process tool capable of removing burrs from the intersection of holes and is ideal for use on CNC machines, freeing the operator to concentrate on quality and high levels of throughput.

(PRWEB) April 20, 2005 -- The problems associated with hand deburring cross-drilled and back-faced holes have been eliminated by the Orbitool, now available in the UK from Finishing Techniques Ltd. The Orbitool is the only in-process tool capable of removing burrs from the intersection of holes and is ideal for use on CNC machines, freeing the operator to concentrate on quality and high levels of throughput.

As many engineers appreciate, the cost of hand deburring can be greater than the cost of the manufactured part. Besides the increased time taken to hand deburr, it is near impossible to achieve consistent results - every part needing rigorous inspection - a process commonly open to human error. Orbitool removes these problems.

The Orbitool is used like other cutting tools on the lathe turret or tool magazine of a drilling machine, making it quick and easy to deploy. It shortens cycle times while achieving consistently high quality results and reduces the need to inspect every part. It also removes the need to batch process parts and eliminates process queues.

Jonathan Dean, Finishing Techniques' managing director, explained, "During my 24 years in the supply of surface finishing equipment to industry, the question engineers always raise is: 'do you have a product which deburrs holes?'. Finally, I can confidently say yes. I am pleased to be able to supply the Orbitool to the UK, a product manufactured and patented by JW Done in the USA. This is a tool that really does make a difference to the bottom line for manufacturers."

The Orbitool is available with a range of options that allow it to be easily tailored to individual operations. Technical specifications and online demonstrations can be downloaded from www.jwdone.com. UK pricing information is available from Finishing Techniques 01706 825 819.

Technical information:
Jonathan Dean, Finishing Techniques Ltd
Holcombe Brook, Bury BL0 9SA
Tel: +44 (0)1706 283921
E-mail: e-mail protected from spam bots
Finishing Techniques web site: www.fintek.co.uk
Orbitool web site: www.jwdone.com

Advertising enquiries:
Jo Ashburner, Finishing Techniques Ltd
Holcombe Brook, Bury BL0 9SA
Tel: +44 (0)1706 283926
E-mail: e-mail protected from spam bots

High res image can be downloaded from: www.clickintopr.com/editors/articleDetail.asp?pjID=170

###

This press release was posted by the following PR Firm
Ainsworth Maguire (View Listing in Directory of PR Firms)

Other Releases by this Member
UNCONVENTIONAL WISDOM - CONSULTING FOR THE HOSPITALITY INDUSTRY 2003-10-09
FINANCIAL ADVISER BEATS BT'S BROADBAND BLACK HOLE MENTALITY 2003-12-04
Short Run Weaving of Bar Towels Opens New Promotional Opportunities for Pub and Leisure Outlets 2004-02-28
New Online PR Service for UK/USA Industry and Organisations 2004-03-26
New Promotional Branding of Towels is More Affordable Thanks to Low Volume Weaving Runs 2004-04-07
New Online Psychometric Profiling - Boosts the Bottom Line 2004-06-09
On the Move, in the Office, Wherever You Are, a New Service Promises to Speed Document Creation 2004-06-20
Clock Creative Scoops Seventh Award 2004-06-27
Global Quality Accreditation for Lubrications Company 2004-07-29
Sarsparilla Success - New Bottling Plant and More Choice from Mawson's Traditional Drinks 2004-08-21
Extra Newswire Coverage Adds Value for Company Press Releases 2004-09-16
New Web Site Gives Easy Access To Towel and Linen Products 2004-09-24
Free Advice During UK National Franchise Week 2004-10-04
Online Community for Buying and Selling Advertising is Launched for All UK and Ireland Media 2004-10-20
Tailored Training to Help Global Management Meet International Challenges 2004-11-27
150 Up and Counting for Advertising Media Portal 2004-11-26
Kappa SSK Select QISv5 Quality Information Software for their Birmingham Mill 2005-01-06
New Independent Audio Visual Consultancy to Solve the AV Blues 2005-01-16
Top Media Specialists Form Online Alliance 2005-02-16
Domino's Pizza Celebrates 20 Successful Years of Franchising 2005-02-19
Easier Access to Treatment Abroad for UK Patients 2005-02-19
New Optimised PCs Promise Quick Start for DSP Projects 2005-03-03
New European Franchising Magazine Launch 2005-03-06
Pioneering Designer to Head Up New Broadcast Graphics Team 2005-04-13

Posted by Industrial-Manufacturing at 02:38 AM | Comments (0)

Durable and Heat-Resistant Expanding Core Chucks Set Industry Standard for Reliability

High-tech integration of materials and superior design quality makes Convertech Core Chucks the industry leader in maximum grip, high-speed control, and reduction of core damage.

WHARTON, NJ (PRWEB) April 20, 2005 -- Converters can dramatically improve splice reliability, increase operating speeds, and save time and money with Convertech Core Chucks. Convertech Core Chucks provide consistent grip with wide-footprint lugs and high-torque pressure without damaging the inside of the core or the core ends. By eliminating core damage, Convertech's Core Chucks reduce operating costs and increase production with repeated use of cores.

Although Convertech's Core Chucks reduce core slippage and ensure maximum grip their advanced design also eases loading and unloading. Ease of removal is maintained with pneumatic and mechanical retraction of lugs, ensuring that the lugs never stick in the core.

High-torque core chuck grip is essential to increased production. Convertech Core Chucks reduce slippage and waste with extensive design modifications which can accomodate extreme torque and weight requirements. Designed for continuous use in demanding applications, Convertech Core Chucks excel in maximum torque capacities, long-life durability, perfect expansion and retraction, and trouble-free maintenance.

Convertech, the leading manufacturer of expanding shafts and chucks for the converting and packaging industries, produces a full line of chuck products in diameters from 3 inches to 12 inches.

For over a quarter century Convertech has been the leader in exceptionally fast lead time with superior engineering and quality built into every shaft and chuck product. With its competitors debilitating delivery time of as much as sixteen weeks, Convertech's fast delivery time of about two weeks keeps customers up and running.

You can find out more about Convertech Core Chucks and fast delivery advantages at http://www.convertech.com

Interview Contact:
Larry Taitel
Telephone: 973-328-1850
e-mail protected from spam bots
http://www.convertech.com

Convertech Inc.
353 Richard Mine Road
Wharton, NJ 07885
+01-973-328-1850 voice
+01-973-328-7256 fax
e-mail protected from spam bots
www.convertech.com

Posted by Industrial-Manufacturing at 02:37 AM | Comments (0)

Using Employee Opinions Effectively When Designing HR Programs

Employee opinion is one of the most powerful resources available to human resource professionals. But what are the best methods for harnessing those opinions?

(PRWEB) April 20, 2005 -- Employee opinion is one of the most powerful resources available to human resource professionals. But what are the best methods for harnessing those opinions?

Conversation - Welcoming feedback via informal conversation is the first step towards utilizing the viewpoints of employees.

Focus Groups - Focus groups take conversation to the next level by brainstorming on particular issues. A focus group gives HR insight into the thoughts, feelings and motivations behind an opinion. An optimal focus group consists of 10 - 20 employees.

SWOT analysis - While focus groups have more free-flowing discussion, SWOT Analysis focus the group on very specific issues. First, the Strengths of the organization are explored. Second, the Weaknesses of the organization are discussed. Third, Opportunities for improvement are brainstormed. Finally, Threats to improvement are considered.

Opinion Surveys - Surveys are an efficient means of extracting information, and for large or geographically dispersed organizations they may be the only option. Here are some things to consider when planning a survey:

Type - Web-based surveys may work for technologically savvy corporations, but others may prefer telephone, or tried-and-true pen-and-paper surveys.

Length - Somewhere between 30-60 questions is the ideal length of a survey. Any longer and you risk driving response rates down due to respondent fatigue.

Language - Both the reading level and the native tongue of an organization's employee base are key to crafting effective questions.

“While a survey can be used as preventive medicine when asking questions about a wide variety of issues, it can also draw out responses on subjects known to generate dissatisfaction. If HR gets wind of rumors about a particular supervisor, or notices a high turnover rate in his or her area, a survey may be able to pinpoint what's amiss,” explained Jennifer C. Loftus, SPHR, CCP, CBP, GRP, National Director, Astron Solutions.

After an organization's first survey, it will be difficult to draw definitive conclusions beyond extreme positives and areas for enhancement. In further years, trend analysis will be possible as opinions change or persist on key issues. After the first survey, focus on extremes. Where did the organization receive its lowest marks? Seek out those areas to follow up on promptly and visibly. This will build faith in the survey process for future years.

Whatever form a survey takes, it is destined to fail unless employees have faith in its confidentiality. It is strongly recommended that a third party conduct the survey, as employees are often suspicious that opinion surveys are tools of an organization's “Thought Police.” Honest feedback can't be elicited if employees feel their opinions can be traced to them.

”Follow-through is vital. A complaint we often see in the comments section of opinion surveys is, ‘I don't think this makes any difference. We do this survey every year and nothing ever happens.’ If you don't want to know about a certain issue, or aren't in a position to effect change once you do, don't ask. Focus on what matters and can be acted upon,” added Loftus.

After a survey, a broad overview of findings and the next steps management will take should be shared with employees. This assures employees that their voices have been heard, and that their supervisors are serious about making the necessary changes.

Jennifer C. Loftus, SPHR, CCP, CBP, GRP is a National Director for Astron Solutions. Her primary areas of expertise are customized market surveys, employee opinion surveys, exit interview systems, base pay compensation programs and computer-based solutions to HR issues. She has nine years of experience garnered at the Hay Group, Parsons Brinckerhoff, Eagle Electric Manufacturing Company, Pace University, and Harcourt General.

Jennifer is a member of the Society for Human Resource Management (SHRM), SHRM’s Consultants Forum, WorldatWork, and the American Society of Healthcare Human Resource Administration (ASHHRA). She is also a member New York HR associations HR/NY and the New York Compensation Association. Jennifer holds the position of Public Relations Chair for HR/NY and is a member of the Career Planning and Professional Development Committee.

Jennifer is a sought-after speaker on topics regarding employee retention strategies, labor market trends, and human resource automation. She has appeared on Cold Pizza, ESPN2's morning show, and WNET, New York City's PBS affiliate, on The Employment Channel. She has presented to national conferences of SHRM’s Employment Management Association (EMA) and ASHHRA, as well as numerous local HR conferences. Jennifer has been published in The American Economist and Workspan, and quoted in the New York Daily News and Time Out New York. She is also a volunteer article reviewer for WorldatWork.

Jennifer has an MBA in Human Resource Management from Pace University and a BS in Accounting from Rutgers University. She is an Adjunct Professor in Human Resources at Pace University. Reach Jennifer directly at 800-520-3889 or e-mail protected from spam bots.

Have a question about employee opinion surveys? Astron Solutions www.astronsolutions.com is a consulting firm dedicated to the delivery of HR consulting services and supportive technology.

Posted by Industrial-Manufacturing at 02:36 AM | Comments (0)

Digitech Names Jim Barnette as Tech Support Manager

Digitech International has announced the promotion of Jim Barnette to oversee the daily operations of its Technical Support Call Center.

(PRWEB) April 20, 2005 -- Digitech International has announced the promotion of Jim Barnette to oversee the daily operations of its Technical Support Call Center.

Digitech International, through its network of Reseller/Installer partners, distributes access control and security systems that provide what the company call’s World Class Security Solutions.

Along with his duties at Digitech, Barnette is actively involved in several organizations across the state, including volunteer work tutoring both middle school and high school teenagers.

Barnette, a graduate of Polytechnic Institute of Brooklyn, holds a Bachelor of Science degree in Aeronautical and Mechanical Engineering as well as a minor in Computer Science. Barnette has been with Digitech for ten years and possesses an extensive background in tech support and programming.

“We will streamline the department and processes in order to make sure we have an adequate response time to the customer. We have an open door, and all suggestions will be appreciated.”

Jim Barnette and the staff may be reached via e-mail at e-mail protected from spam bots. Digitech may be reached through the web site at www.digitech-intl.com, or by calling 800.523.9504

Posted by Industrial-Manufacturing at 02:35 AM | Comments (0)

Welcome to the World of Audit-Proof Safety Management

We are proud to introduce Protecs to you. Protecs helps you manage the safety situation in a plant. Whether it’s about classifying risks according to IEC61508 (SIL), managing an inspection regime for safety provisions – including “hard to plan” activities, like those that require a plant stop, or managing overrides in the plant: Protecs does it all for you. Keywords for Protecs are Safeguarding, Swiftness and Audit Proof.

(PRWEB) April 20, 2005 -- By Safeguarding, we mean that a safety system should not only automatically plan safety related work, such as inspections, but it must also safeguard that the work is actually done. Protecs has a sophisticated reminders function for this, that keeps you informed about work that has become overdue. With Protecs it is almost impossible to forget essential inspections to be done.

Swiftness means that safety should not be a lot of work. Maintaining and inspecting all those provisions is a costly matter. Because of this, Protecs focuses on minimizing the time needed for the administration of the most intensive safety activity of all: inspecting. Once configured, you don’t have to plan inspections, you just have Protecs print the checklists of what needs to be done. When inspections have been carried out, Protecs offers a very fast Fill In mode to enter the results very fast.

Audit Proof stands for making sure your safety management is transparent, accessible and is easy to comprehend, but above all answers any question regarding the safety within of your plant. Of course you don’t want possible flaws in safety related activities to be first discovered by safety audits. In stead, Protecs will make you aware of any problems beforehand. Due to a well defined set of reports, Protecs will supply the information required for the audit with a few mouse clicks, which reduces the time needed to prepare for an audit drastically.

Please feel free to get acquainted with Protecs by downloading a Free Full working demoversion at the download link below:
http://www.lance-safety.com/modules.php?op=modload&name=Downloads&file=index&req=getit&lid=42

This demo version allows you to try out Protecs for a few weeks. We have created some interesting demo cases for you to show the main functions of Protecs. If you have anymore questions, feel free to contact either our support desk (e-mail protected from spam bots, +31 475 33 17 24) for technical questions, or our sales department (e-mail protected from spam bots, +31 475 31 86 97), for other questions.

I wish you a happy test drive.

Posted by Industrial-Manufacturing at 02:34 AM | Comments (0)

ETO Configurator included with Encompix ETO ERP

Encompix ETO ERP software leader based in Cincinnati, OH, announced the inclusion of the proprietary ETO Configurator as part of the company’s product suite.

(PRWEB) April 20, 2005 -- Encompix ETO ERP software leader based in Cincinnati, OH, announced the inclusion of the proprietary ETO Configurator as part of the company’s product suite. The ETO Configurator is based on Configure One’s concept product and is specifically design for engineer-to-order manufacturers. Unlike most project configurators that can handle only simple configuration challenges, the ETO Configurator can handle the very complex product rules normally associated with engineer-to-order, project-based, or custom manufacturers.

Roger Meloy, Marketing Director with Encompix, note, “The ETO Configurator dramatically reduces the time it takes to go from a customer’s initial request for a quote to when the product is actually shipped by streamlining and automating much of the pre-manufacturing process. This includes the creation of quotes, sales and production drawings, routings, and bill of material (BOM.) The data is seamlessly integrated with other Encompix components and is used to create a routing and a complete indented BOM in Emcompix.”

According the Eric Binning at Encompix, “By automating sales and engineering tasks the Encompix ETO Configurator helps speed up response to quotation requests, free up engineering personnel, decrease errors and rework, and reduce overall lead time.”

Encompix (www.encompix.com) has filled the manufacturing software requirements of Engineer-to-Order companies since 1992. The company name reflects our commitment to developing business application solutions that encompass the complex areas of project-based and job-based manufacturing.

Encompix provides ETO manufacturers with a competitive advantage by improving bottom line results.

Posted by Industrial-Manufacturing at 02:34 AM | Comments (0)

Lean e-Kanban: Breeding Proactive Suppliers

Breeding proactive suppliers - According to Sam Bayer, President of Datacraft Solutions (www.datacraftsolutions.com).

(PRWEB) April 20, 2005 -- Breeding proactive suppliers - According to Sam Bayer, President of Datacraft Solutions (www.datacraftsolutions.com). “Kanban implies partnership. Both parties have a responsibility to share information and strive towards process improvement. Sounds great in theory but how do you enable it in practice? Share real time “actionable” information between both parties.” This level of e-kanban Lean efficiency is achievable. Fax Kanban is Not Efficient and Not Lean

At ten minutes per fax, someone is spending 3.5 hours per day in administration time. That inefficiency results in less time to utilize more suppliers or improve the relationships with existing suppliers.

Furthermore, even if 99% of those faxes are trouble free procurement signals, four faxes per month are going to be problematic and dilute the entire rationale for a lean manufacturing operation. Suppliers claim they did not receive the fax kanban; suppliers cannot make the shipment date requested and expedited shipping fees are incurred, or worse, there will be a stockout which will negatively impact customer service levels.

According to Sam Bayer, President of Datacraft Solutions Process improvements with existing suppliers will further reduce lead times and inventory levels and bring more suppliers onto the system.

Datacraft Solutions
www.datacraftsolutions.com
Sam Bayer
e-mail protected from spam bots
919-667-9804

Posted by Industrial-Manufacturing at 02:33 AM | Comments (0)

Small Manufacturers Leasing E-Z-MRP Leading Manufacturing Software

E-Z-MRP, the leading manufacturing software system for small manufacturers, announced effective April 15th, there will be a new pricing and product structure.

(PRWEB) April 20, 2005 -- E-Z-MRP, the leading manufacturing software system for small manufacturers, announced effective April 15th, there will be a new pricing and product structure. According to Rocky Smolin, founder of Beach Access Software, makers of E-Z-MRP, “We see a distinction between those small manufacturers with less than five hundred parts in material resource planning, and those with a need for unlimited part numbers.”

Smolin noted that some manufacturers will start with the under 500 parts version of E-Z-MRP, priced at $2995, and grow into the new unlimited version, priced at $9800. Beach Access Software credits the $2995 for customers who later choose to upgrade. Other small manufacturers who presently have more than five hundred part will start right away with the E-Z-MRP Unlimited version.

To accommodate the new pricing structure E-Z-MRP offers a Leasing program that ensure a rapid Return-on-Investment.

• Lease E-Z-MRP with two full years of support for just $169.96 per month.
• Lease E-Z-MRP Unlimited with two full years of support for just $495.00 per month.
For more information visit the company’s web site: http://www.e-z-mrp.com, or call 858-259-4334.

Small manufacturers with more than one hundred parts can no longer manage the manufacturing process on an Excel spreadsheet. Since more than 84% of all manufacturers have less than fifty employees, there is a remarkable opportunity for cost-effective manufacturing systems like E-Z-MRP. Despite the extensive media coverage regarding ERP (Enterprise Resource Planning), in most cases these small manufacturers do not require all the functionality offered, nor can many afford the price point.

Somewhere between Excel and ERP is the core process for most manufacturers. By offering the two versions of E-Z-MRP, no small manufacturer will be required to purchase more software than actually needed, while still having the ability to grow into the E-Z-MRP Unlimited version.

The EZ MRP package includes a full-featured Bill of Materials processor, plus a material planning and tracking module which tracks all sales orders, forecasts, work orders (planned, firm, and released), purchase orders, shortages, raw materials and finished goods inventories. It also records a complete audit trail on all inventory transactions. Also included is a physical inventory function and a purchase order module for printing purchase orders.

E-Z-MRP runs on any Windows-based PC or network, and requires only Access 2000, Access XP, or Access 2003 to run. No on-site or remote training is required. A comprehensive user manual with tutorials provides all the required instruction.

Beach Access Software
Rocky Smolin
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:33 AM | Comments (0)

Mississauga-Based OTI Sees Integrated System as Key Rationale for PRONTO ERP Selection

OTI, Optimization Technology Inc., located in Mississauga Canada, has been developing and implementing ERP (Enterprise Resource Planning) systems since 1984. The Canadian VARs (Value Added Reseller) customer base appreciates the features built into their legacy systems which focused on individual manufacturing and distribution requirements.

(PRWEB) April 20, 2005 -- OTI, Optimization Technology Inc., located in Mississauga Canada, has been developing and implementing ERP (Enterprise Resource Planning) systems since 1984. The Canadian VARs (Value Added Reseller) customer base appreciates the features built into their legacy systems which focused on individual manufacturing and distribution requirements. With the advent of GUI (Graphical User Interface) it became too difficult to add some of the new productivity features OTI and their clients wanted.

According to Dave Airey, VP of Sales and Marketing at OTI, “We started looking for a way to move our application to a GUI “look and feel,” but after two years of investigation it became obvious that it was not a practical goal. As an alternative we investigated upgrading our legacy application to a new product.”

OTI’s requirements for a new system revolved around their customers. After many years of custom changes, the legacy system was geared to client requirements.

Airey noted, “OTI’s initial search took us to the major ERP players, but none had the features we required to support our loyal customers.”

Finding an ERP System with Strong Functionality:
The search for a new ERP system ended when OTI was introduced to PRONTO North America (www.PRONTOerp.com). According to Airey, “We were introduced to Pronto and were immediately impressed with the rich functionality. One important feature was that Pronto is fully integrated. We had engineered our legacy system to be fully integrated so this was of major importance.”

The Rationale for PRONTO ERP:

- Fully integrated
- User definable options to tune the systems functionality
- A support system to back up our customers
- Functionality
- GUI look and feel built using a 4 GL tool
- Equipment rentals and tracking
- Service maintenance
- Both Manufacturing and Distribution in one package
- Email & Fax capability
- Multiple SQL platforms including MS SQL

Additional integrated features OTI customers’ are now showing interest include:

- CRM (Customer Relationship Management)
- Advanced Warehousing
- Scan Pack
- Plant Maintenance

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the distribution sector ERP leader. Tom Verzi, Director of Marketing and Development for PRONTO expressed his appreciation of Dave Airey’s professionalism.

Contact Information:
Dave Airey
OTI (Optimization Technology, Inc.)
e-mail protected from spam bots

Tom Verzi
PRONTO ERP
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:30 AM | Comments (0)

PRONTO North America Users Conference to Feature New Product Features of PRONTO-Xi

Peggy Smedley is the editor of Start Magazine and will be addressing the first annual PRONTO North America Users Conference on Thursday, May 5th. Smedley was recently profiled in the Wall Street Journal and authored Mending Manufacturing, How America Can Manufacture its Survival. She is an award-winning journalist.

(PRWEB) April 20, 2005 -- Peggy Smedley is the editor of Start Magazine and will be addressing the first annual PRONTO North America Users Conference on Thursday, May 5th. Smedley was recently profiled in the Wall Street Journal and authored Mending Manufacturing, How America Can Manufacture its Survival. She is an award-winning journalist.

Wednesday, May 4th, Thomas R. Cutler, CEO of TR Cutler, Inc., author of the Manufacturers Public Relations and Media Guide, Associate Editor of Industrial Connection, and Contributing Editor to InMFG magazine will be addressing the PRONTO North America Users Conference. Cutler is also the founder of the Manufacturing Media Consortium, a group of 2000 journalists writing about various aspects of manufacturing and industrial trends.

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the manufacturing, service, and distribution ERP leader.

Tom Verzi
PRONTO ERP
952-942-5858
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:27 AM | Comments (0)

April 19, 2005

Specialist CNC Monitors Replacement Site for Machine Tools from America, France, Germany, Japan, Scandanavia and Taiwan

CNC Monitors a division of DNC Electronics Ltd – 'The CNC Electronic Specialists', providing monitors to the CNC machine tools industry worldwide. Some of the largest manufacturers of machine tools for the metal cutting industry, use proprietry CNC automation and drive systems; including Fanuc, Siemens, Mitsubish, Heidenhain, Toshiba, Hitachi and many more. CNC Monitors offer an alternative cheaper supply to the OEM's, building new replacement equivalents for obsolete monitors. Inclusive of replacement TFT monitors for Fanuc 9” colour and 12” (color) crt monitors which are no longer manufactured due to worldwide display manufacturers migration from the more expensive production costs of CRT monitors to the cheaper production costs of TFT and LCD based technologies.

(PRWEB) April 19, 2005 -- CNC monitors is the largest manufacturer of replacement equivalent monitors for CNC machine tools industry in Europe. Based in Swindon, UK. Manufacturing exclusively for the machine tools industry and nothing else. Offering 88 models of replacement equivalents made for automation controls of Fanuc, Siemens, Matsushita, Mitsubishi, Heidenhain, Hitachi, GE, Toshiba which are fitted on Hardinge, Makino, Cincinnati, Yang, Hass, Leadwell, Bridgeport, Mikron, Colchester, Mori Seiki and many more builders of machining centers (centre) and turning lathes. CNC Monitors strive to continue research and development in increasing the range of available monitors, either as a cheaper alternative, or as the only manufacturer of obsolete CNC monitor displays.

Over 2000 replacement monitors have been manufactured via CNC monitors and its agent in America, CNC Electronics LLC which deals exclusively with all enquiries within the America's. All equivalent monitors (exact physical and electrical compatibilty) that are offered off the shelve are fully compatible both electronically and physically and made as replacements only for the OEM that they replace. Pricing for monitors has been determined by being a third party and non OEM supplier to the controls and hence massive savings are possible, testing is extensive. Warranties are currently set at 12 months, with a return to base policy, though if stock is available, the officer of the company dealing with the situation will determine the best warranty solution to keep the clients machine downtime to a minimum

Special mention has to be given to TFT replacements: Many companies have taken the oppurtunity to manufacture replacement color TFT panels for CRT displays, though after 2 years of research and development and our background knowledge of CNC electronics and controls, CNC monitors have taken this into a new world of CNC machine tools, with the control system knowledge to back it up.

Refurbishments are available for the less common monitors from machine tools, that would require massive hikes in our pricing to offer as an off the shelve solution due to the lack of demand. In these particular cases, metalwork is required in which a 24 hour build and 24 test period is required though our 12 month warranty is still offered. Exchange monitors are available with a 90 days warranty on selected monitors.

Main markets include the United Kingdom, Germany, Denmark, Belgium, France, Holland, Spain, Portugal, Italy, Sweden, Norway, Finland, Australia, China, Phillipines, South Africa, USA, Canada, Brazil, Mexico. Markets are closely determined by the sales of the machine tool companies around the world and there use of controls and the monitors that we build replacements for.

Shipping throughout the world. UK and Europe are a 24 hour delivery except for eastern boundries of Europe. Asia, Africa and Austrailia are a 48-74 hour ship. America's coutesy of CNC electronics LLC has a 24 hour for the USA and Canada and a 24-72 ship to South America dependant on the support of the major international courier companies, such as UPS, FEDEX, TNT and DHL.

Contacts:
Europe and Austrailasia -
CNC Monitors
Unit 4, Kiln Lane.
Swindon
UK. SN2 2NP.
T: +44 1793 61 53 56
F: +44 1793 43 65 94
W: http://www.cnc-monitors.co.uk

USA, Canada, South America.
CNC Electronics LLC.
Astec Center 1.
2020 Avon Street
Charlottesville.
VA, 22902.
T: +1 434 971 1394
F: +1 434 971 1689
W: http://www.cnc-electronics.com/monitor.html

Posted by Industrial-Manufacturing at 03:35 AM | Comments (0)

DataCore Technology’s New QuickStart Program Provides Electronic Data Management

DataCore Technology introduces a new Electronic Data Management (EDM) program, QuickStart, for small- to mid-sized companies. The QuickStart program delivers an affordable and easily-installed EDM solution to companies with limited budgets and IT resources.

Exton, PA (PRWEB via PR Web Direct) April 19, 2005 -- DataCore Technology Inc. is pleased to introduce its new QuickStart Program for Cyco AutoManager® TeamWork. The QuickStart Program, designed to meet the needs of small to mid-sized companies, delivers a complete Electronic Data Management (EDM) solution at a fixed, upfront price in only about a week.

The solution is ideal for companies with limited budgets and Internet technology resources that have outgrown the Windows file system to manage data.

Recently, DataCore successfully implemented the QuickStart Program for Masland Carpets. "We needed a better way to manage our documents but were concerned that the solution would be complicated and costly. DataCore’s QuickStart Program made things very easy,” said Marshall O’Hern, engineering manager of Masland Carpets. “From installation to actual usage, we knew exactly what to expect. Our productivity was not disrupted, and with the fixed, upfront price of QuickStart, there were no surprise costs in the end. With the new system in place, I can already see a return on our investment."

According to Brian Sallade, president of DataCore Technology, “QuickStart leverages DataCore’s extensive implementation experience and expertise with Cyco Software’s award winning AutoManager TeamWork software, to deliver an EDM solution with reduced startup costs that can be installed in only about a week. With a shorter learning curve, QuickStart provides an immediate impact on productivity and the overall success of the system.”

By including implementation, training and support into one best-practices solution, DataCore can ensure that clients will be up and running quickly -- without disrupting current operations. A few features of QuickStart include:

* Automated revision control and archiving
* Fast access to all of your information
* Integration with CAD software
* Safe, secure vaulted environment
* Support for a workflow approval process

About DataCore Technology:
DataCore specializes in implementing Electronic Data Management solutions for energy, government, manufacturing and pharmaceutical organizations to help improve time to market, reduce asset maintenance costs and comply with government regulations. The company operates with the highest degree of integrity, provides quality products and services and maintains a steadfast commitment to excellence. For more information, please visit www.data core.com or call 800-531-2287.

About Cyco Software:
Cyco Software provides Engineering Data Management and Application Integration solutions for multiple vertical industries, including manufacturing, energy, government, pharmaceutical, retail and telecommunications. Cyco Software has almost two decades of industry experience with more than 16,000 clients and over 275,000 users in more than 50 countries worldwide. The company has offices in the United States, the United Kingdom, Germany, Italy, Korea, Russia and the Netherlands, and an extensive global network of established partners around the world. Cyco Software ensures a high level of service and support for its leading software solutions, Cyco AutoManager Meridian and Cyco AutoManager TeamWork. For more information, please visit www.cyco.com or call 800-323-2926, Ext. 110 (Americas) or +31 (0) 70 413-3700 (Europe). Cyco Software, Cyco and AutoManager are registered trademarks of Cyco Software BV.

Contact:
Brian Sallade
DataCore Technology, Inc.
800-531-2287
www.data-core.com

Posted by Industrial-Manufacturing at 03:34 AM | Comments (0)

Webcom, Inc. Announces Siebel Validation for CRM OnDemand

Webcom, Inc. Successfully Integrates WebSource CPQ with Siebel CRM OnDemand

BARCELONA, SPAIN (PRWEB) April 19, 2005 -- Webcom, Inc., a leader in simplified quote-to-order enablement for the selling of complex products and services, today announced that the integration between its WebSource CPQ V4.01 and Siebel CRM OnDemand Release 6 has been successfully validated by Siebel Systems, Inc. Siebel Systems is a leading provider of business applications software and hosted CRM solutions.

Webcom’s products provide the ability for customers to configure, price, quote and propose their offerings across multiple sales and distribution channels, anytime, anywhere. Siebel Systems’ multichannel offerings allow organizations to intelligently manage and coordinate all customer interactions across the Web, contact center, field sales/service force, branch/retail network, and indirect and partner distribution channels. Siebel CRM OnDemand is an industry-leading hosted CRM offering delivered over the Web and accessible from an Internet browser at a fixed price per user per month. With this validation, customers of Siebel Systems and Webcom can now process an opportunity from quote to order without any duplication of effort or data.

The integration of Webcom’s WebSource CPQ with Siebel CRM OnDemand simplifies the opportunity-to-order process for the interactive selling of complex products and services. Deployed in an on-demand or on-premise model, WebSource CPQ allows users to configure, price, quote and propose their offerings with nothing more than a browser. WebSource CPQ not only handles the traditional bill of material, routing and diagram generation tasks frequently associated with product configurators, but also addresses the guided selling, proposal generation and multi-level channel management tasks associated with sales configurators. The solution helps drive increased revenues and margins, increased customer satisfaction, reduced costs and improved productivity. In addition, the solution automates quoting, quote revisions, the quote approval process, and guided selling and self-service applications.

“Siebel Systems’ commitment to customer satisfaction and market leadership has significantly impacted the way companies do business,” said Chris Lesar, Executive Vice President of Webcom, Inc. “We believe that, with the addition of Webcom’s capabilities, Siebel Systems’ customers will further benefit from the ability to bridge the gap from opportunity to order.”

“The integration of Siebel CRM OnDemand with Webcom’s WebSource CPQ delivers compatible architectures, enterprise scope, and cutting-edge technology to provide a unique, seamless solution,” said Catherine Cherubino, Vice President, Channels and Alliances, OnDemand and SMB at Siebel Systems. “This solution allows companies to efficiently build dynamic customer relationships and move quickly from opportunity to order.”

Siebel Systems forms alliances with proven technology leaders to deliver tangible business benefits throughout the enterprise. By choosing Siebel business applications and validated partner solutions, Siebel Systems’ customers can pursue a best-of-class software acquisition strategy. The Siebel Validation Program applies rigorous technical scrutiny to evaluate the integration of third-party solutions with Siebel business applications. Integrations that meet the strict testing criteria are validated and documented by the Siebel Validation Program.

About Webcom, Inc.

Webcom, Inc. provides software solutions that simplify the quote-to-order process for the selling of complex products and services. Requiring only a browser, WebSource CPQ allows customers to configure, price, quote and propose their offerings across multiple sales and distribution channels, anytime, anywhere. WebSource CPQ not only handles the traditional bill of material, routing and diagram generation tasks frequently associated with product configurators, but also addresses the guided selling, proposal generation and multi-level channel management tasks associated with sales configurators. The solution helps drive increased revenues and margins, increased customer satisfaction, reduced costs and improved productivity. Companies utilizing Webcom’s products and services include Rockwell Automation, Danfoss, Corning Cable Systems, Verity, Grayhill and GE Industrial Systems. Founded in 1997, Webcom is a privately held corporation headquartered in Milwaukee, Wisconsin with offices in the USA and Europe. For more information, visit Webcom at www.webcominc.com or call 414-273-4442 (toll free 877-508-6323).

Press Contact:
Webcom, Inc.
Nancy Syverson
(414) 273-4442
e-mail protected from spam bots

Siebel is a trademark of Siebel Systems, Inc. and may be registered in certain jurisdictions. All other product and company names mentioned are the property of their respective owners and are mentioned for identification purposes only.

Posted by Industrial-Manufacturing at 03:33 AM | Comments (0)

PIPC Appoints New Chicago Managing Director

Dean Evans appointed Managing Director to head up Chicago.

Chicago, IL (PRWEB) April 19, 2005 -- Global project solutions firm PIPC has appointed Dean Evans as a Managing Director to head up their new office in downtown Chicago, which officially opened its doors April 1, 2005.

Dean has over 15 years experience in delivering complex, multi-dimensional strategic and Information Technology programs for Global 100 organizations. Most recently, he was a successful Partner (elect) with the PA Consulting Group and managed their IT consulting group in the US.

Dr Simon Rawling, CEO of PIPC Global, said that Dean’s appointment will accelerate PIPC’s growing presence in the US: “The Chicago office is important to our growth strategy, so we’re delighted to have someone of Dean’s calibre in the role. His experience in the US market, particularly in our lead sectors of financial services, oil & gas and energy will further PIPC’s exposure to global companies based in the US. Additionally, it is a bonus for our European and Asia Pacific-based clients wanting to grow their market presence in the US.”

“I am excited about joining a dynamic and growing global consultancy like PIPC”, said Dean Evans, “It is refreshing to be part of a Leadership Team that understand the changes in the consulting market over the last few years and have developed a model that delivers effectively for both clients and employees. Chicago is a critical piece of any viable consulting presence in the US and I look forward to rapidly developing a Chicago base that will complement our existing business in New York, and fuel our US growth.”

Phil Veal, a Managing Director in PIPC’s New York office, says “With a presence in Chicago adding to our existing office in New York, we can now provide an improved service to our US clients. I’m pleased to be working with Dean – our clients are asking us to run more complex post-merger integrations and manage bigger outsourcing programs than ever before, and Dean’s track record will be invaluable in delivering these assignments.”

About PIPC
PIPC is a global project solutions company. Formed in 1992 by an entrepreneurial group of practitioners, PIPC has supported the delivery of some of the largest and most complex business projects and programs in corporate history.

With a presence in the US, Europe, and the Asia-Pacific regions, PIPC’s network is based on highly skilled project specialists who have the ability to tailor project solutions to meet specific business and market-centric needs with the capability to scale these across the globe. Among its Fortune 500 client base are organizations from sectors as diverse as banking & financial services, telecommunications, pharmaceuticals, energy, public sector, technology and environment.

Core values of action, common sense, knowledge and fun, along with a relentless commitment to delivering successful projects, means PIPC enjoys the kind of client retention and rates of return most companies can only dream about.

For more information about PIPC visit http://www.pipc.com. Dean can be reached at +1 312 214 3322.

Posted by Industrial-Manufacturing at 03:33 AM | Comments (0)

It's Spring - Time for a Compensation Program Tune Up

Now that winter has passed, the annual ritual of spring cleaning is in full swing. Spring cleaning is more than cleaning the windows and clearing the cobwebs that hid in the corners during the winter. “Spring is a time to take a serious look at your compensation program and begin planning for the next budget cycle. Depending on your organization's fiscal year, it may also be time to determine appropriate market adjustments and pay increases for the coming year,” said Michael Maciekowich, National Director, Astron Solutions.

(PRWEB) April 19, 2005 -- Now that winter has passed, the annual ritual of spring cleaning is in full swing. Spring cleaning is more than cleaning the windows and clearing the cobwebs that hid in the corners during the winter. “Spring is a time to take a serious look at your compensation program and begin planning for the next budget cycle. Depending on your organization's fiscal year, it may also be time to determine appropriate market adjustments and pay increases for the coming year,” said Michael Maciekowich, National Director, Astron Solutions.

Compensation program spring cleaning is more than looking at the market and determining adjustments. It is a time to step back and determine if the system remained in alignment with organizational and employee needs. Most organizations have long-term strategic plans with short-term objectives to determine progress. A compensation program designed at the beginning of a long-term strategic cycle also needs flexibility to address yearly short-term organizational objectives. As new objectives come to the forefront, or current ones are modified, the compensation plan must also change.

This is a different way of thinking about compensation programs. There are a number of tools and processes to help with this matter. One is a survey of the compensation program's effectiveness for users, including executive management, department management, and employees. The focus of this annual survey is the following:

- What aspects of the current compensation program were most effective in the past year?
> What aspects seem to have had a positive impact on employees in terms of retention and morale?
- What aspects of the current compensation program were least effective in the past year?
> What issues did human resources seem to spend the most time discussing with employees and managers?
- What should be the focus of the compensation program in the coming year?
> What are managers' and employees' expectations in terms of compensation determination?
- What will prevent this from happening?
> To what extent do managers and employees understand current financial issues facing the organization?

With this understanding, human resources must answer the following five questions:
- What external market challenges or pressures will be placed on the compensation system in the coming year?
> Has the market shifted? Is there a new strategic need in the organization that will alter our market focus, either by type of job or market definition? Is the organization in a position to remain competitive?
- What internal job equity challenges or pressures will be placed on the compensation program in the coming year?
> If a job evaluation system is used, are the factors and factor weights applicable based on current strategic direction? If not, what modifications are required?
- What employee equity challenges or pressures will be placed on the compensation program in the coming year?
> Have recent market adjustments and system modifications forgotten the employees? Are we able to attract employees without causing internal pay compression?
- What financial challenges will impede the ability of the organization to successfully fund and implement needed compensation program elements?
> Can the organization sustain past financial commitments to the compensation program? If not, how will spending priorities be set?
- What changes need to be made as to how employees are recognized and rewarded for their contributions to the organization?
> Do the current recognition and reward mechanisms work to motivate employees to contribute to the organization's strategic direction?

With these questions answered, human resource next must develop a strategic response. Take the five questions above and overlay the four question survey responses. This helps to develop a strategic response to each of the five key compensation issues. Here are basic examples of the thought process for auditing current compensation processes:

- External Equity Issues: Most effective. Continue current process.
- Internal Equity Issues: Least effective. Additional focus on internal job placement required.
- Employee Equity Issues: Least effective. Serious compression issues developed that need further action.
- Ability to pay issues: Most effective. Required funding of the program is understood and available.
- Reward and Recognition Issues: Most effective. High level of satisfaction with current performance assessment and rewards systems.

With this information in hand, the final step is to create a focused strategic response to present to senior management. The result is a fresh look at your compensation program and a focused direction for the year ahead.

Michael Maciekowich is a National Director for Astron Solutions. His areas of expertise include the development, design, and implementation of executive, physician, and employee total cash compensation and performance management systems in all industries. His primary focus is the integration of compensation and human resource strategies with organization-specific missions, visions, values, and strategic operating plans. Michael has twenty-five years of consulting and industry compensation experience. He can be reached at 800-520-3889 or e-mail protected from spam bots.

Astron Solutions is a consulting firm dedicated to the delivery of HR consulting services and supportive technology. For more information about giving your compensation program a spring cleaning, call Astron Solutions at 800-520-3889 or visit www.astronsolutions.com.

Posted by Industrial-Manufacturing at 03:32 AM | Comments (0)

B&K Overcomes Operational Challenges with Encompix ETO ERP

B&K Corporation has two Michigan manufacturing plants, one in Fenton and one in Saginaw. The company founded in 1952 recently transformed their technology process by implementing ETO (Engineer-to-Order) ERP (Enterprise Resource Planning) Leader Encompix, based in Cincinnati, OH.

(PRWEB) April 19, 2005 -- B&K Corporation has two Michigan manufacturing plants, one in Fenton and one in Saginaw. The company founded in 1952 recently transformed their technology process by implementing ETO (Engineer-to-Order) ERP (Enterprise Resource Planning) Leader Encompix, based in Cincinnati, OH.

Kurt Kuck, CFO for B&K shared some of the operational challenges the company faced on a daily basis prior to the Encompix implementation. Kuck noted, “We are a special order business. Every order we get is different in some regard, but many of our machines have some commonality to them. Our tendency was that when we received a new order, we had not simplified method of identifying what we could use from previous orders. That approach just added to the cost. What was needed was some standardization.”

Kuck also on the lack of efficiency in the old Syteline system from Symix (now Infor Global Systems). “Syteline was fine for tracking material and labor costs. But what was lacking was the capability to bring it all together into a job cost system that we could use for percentage of completion.”

Kuck noted they did not have a real time system. It was a very paper intensive system. The company would go into monthly job cost meetings that lasted hours and with three inch books of paper with all project budget recaps. The Syteline data was three weeks old.

Encompix benefits after just six months made a dramatic difference according to Kuck: “By eliminating the manual input that resulted from maintaining duel systems, B&K dramatically decreased our clerical time. This has made out month-end process much more streamlined and efficient. Encompix give us vastly improved information. We are able to see the exact status of all our projects. How we go into those meetings and we just pull everything up onto the screen and enter job notes right into the system. It is much more of a real-time system.”

Encompix (www.encompix.com) has filled the manufacturing software requirements of Engineer-to-Order companies since 1992. The company name reflects our commitment to developing business application solutions that encompass the complex areas of project-based and job-based manufacturing.

Encompix provides ETO manufacturers with a competitive advantage by improving bottom line results.

Posted by Industrial-Manufacturing at 03:31 AM | Comments (0)

Internal Replenishment with Lean Manufacturing E-Kanban:

Internal Replenishment with Lean Manufacturing E-Kanban:

(PRWEB) April 19, 2005 -- The use of supermarkets is a kanban best practice. They insure steady availability of material to consuming cells, albeit at a cost of maintaining some inventory buffer. But how do supermarkets stay stocked at the minimum inventory levels? Manufacturers, like DJ Orthopedics has linked the supermarket electronically to internal suppliers in their machine shop. This level of e-kanban Lean efficiency is accomplished through Signum, the product of Datacraft Solutions (www.datacraftsolutions.com).

FAX KANBAN is NOT Efficient and NOT Lean

At ten minutes per fax, someone is spending 3.5 hours per day in administration time. That inefficiency results in less time to utilize more suppliers or improve the relationships with existing suppliers.

Furthermore, even if 99% of those faxes are trouble free procurement signals, four faxes per month are going to be problematic and dilute the entire rationale for a lean manufacturing operation. Suppliers claim they did not receive the fax kanban; suppliers cannot make the shipment date requested and expedited shipping fees are incurred, or worse, there will be a stockout which will negatively impact customer service levels.

According to Sam Bayer, President of Datacraft Solutions Process improvements with existing suppliers will further reduce lead times and inventory levels and bring more suppliers onto the system.

Datacraft Solutions
www.datacraftsolutions.com
Sam Bayer
e-mail protected from spam bots
919-667-9804

Posted by Industrial-Manufacturing at 03:30 AM | Comments (0)

Leasing with New Two-Tier Pricing Structure Makes E-Z-MRP Leading Manufacturing Software for Small Manufacturers

E-Z-MRP, the leading manufacturing software system for small manufacturers, announced effective April 15th, there will be a new pricing and product structure.

(PRWEB) April 19, 2005 -- E-Z-MRP, the leading manufacturing software system for small manufacturers, announced effective April 15th, there will be a new pricing and product structure. According to Rocky Smolin, founder of Beach Access Software, makers of E-Z-MRP, “We see a distinction between those small manufacturers with less than five hundred parts in material resource planning, and those with a need for unlimited part numbers.”

Smolin noted that some manufacturers will start with the under 500 parts version of E-Z-MRP, priced at $2995, and grow into the new unlimited version, priced at $9800. Beach Access Software credits the $2995 for customers who later choose to upgrade. Other small manufacturers who presently have more than five hundred part will start right away with the E-Z-MRP Unlimited version.

To accommodate the new pricing structure E-Z-MRP offers a Leasing program that ensure a rapid Return-on-Investment.

• Lease E-Z-MRP with two full years of support for just $169.96 per month.
• Lease E-Z-MRP Unlimited with two full years of support for just $495.00 per month.

For more information visit the company’s web site: http://www.e-z-mrp.com, or call 858-259-4334.

Small manufacturers with more than one hundred parts can no longer manage the manufacturing process on an Excel spreadsheet. Since more than 84% of all manufacturers have less than fifty employees, there is a remarkable opportunity for cost-effective manufacturing systems like E-Z-MRP. Despite the extensive media coverage regarding ERP (Enterprise Resource Planning), in most cases these small manufacturers do not require all the functionality offered, nor can many afford the price point.

Somewhere between Excel and ERP is the core process for most manufacturers. By offering the two versions of E-Z-MRP, no small manufacturer will be required to purchase more software than actually needed, while still having the ability to grow into the E-Z-MRP Unlimited version.

The EZ MRP package includes a full-featured Bill of Materials processor, plus a material planning and tracking module which tracks all sales orders, forecasts, work orders (planned, firm, and released), purchase orders, shortages, raw materials and finished goods inventories. It also records a complete audit trail on all inventory transactions. Also included is a physical inventory function and a purchase order module for printing purchase orders.

E-Z-MRP runs on any Windows-based PC or network, and requires only Access 2000, Access XP, or Access 2003 to run. No on-site or remote training is required. A comprehensive user manual with tutorials provides all the required instruction.
Beach Access Software
Rocky Smolin
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 03:30 AM | Comments (0)

Mississauga-Based OTI Provides Rationale for PRONTO ERP Selection

Mississauga-Based OTI Provides Rationale for PRONTO ERP Selection

(PRWEB) April 19, 2005 -- OTI, Optimization Technology Inc., located in Mississauga Canada, has been developing and implementing ERP (Enterprise Resource Planning) systems since 1984. The Canadian VARs (Value Added Reseller) customer base appreciates the features built into their legacy systems which focused on individual manufacturing and distribution requirements. With the advent of GUI (Graphical User Interface) it became too difficult to add some of the new productivity features OTI and their clients wanted.

According to Dave Airey, VP of Sales and Marketing at OTI, “We started looking for a way to move our application to a GUI “look and feel,” but after two years of investigation it became obvious that it was not a practical goal. As an alternative we investigated upgrading our legacy application to a new product.”

OTI’s requirements for a new system revolved around their customers. After many years of custom changes, the legacy system was geared to client requirements.

Airey noted, “OTI’s initial search took us to the major ERP players, but none had the features we required to support our loyal customers.”

Finding an ERP System with Strong Functionality:

The search for a new ERP system ended when OTI was introduced to PRONTO North America (www.PRONTOerp.com). According to Airey, “We were introduced to Pronto and were immediately impressed with the rich functionality. One important feature was that Pronto is fully integrated. We had engineered our legacy system to be fully integrated so this was of major importance.”

The Rationale for PRONTO ERP:

o Fully integrated
o User definable options to tune the systems functionality
o A support system to back up our customers
o Functionality
o GUI look and feel built using a 4 GL tool
o Equipment rentals and tracking
o Service maintenance
o Both Manufacturing and Distribution in one package
o Email & Fax capability
o Multiple SQL platforms including MS SQL

Additional integrated features OTI customers’ are now showing interest include:

o CRM (Customer Relationship Management)
o Advanced Warehousing
o Scan Pack
o Plant Maintenance

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the distribution sector ERP leader. Tom Verzi, Director of Marketing and Development for PRONTO expressed his appreciation of Dave Airey and the quality of the organization.

Contact Information:
Dave Airey
OTI (Optimization Technology, Inc.)
e-mail protected from spam bots

Tom Verzi
PRONTO ERP
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 03:29 AM | Comments (0)

PRONTO North America Users Conference to feature Keynote Address: TR Cutler

PRONTO North America Users Conference to feature Keynote Address: TR Cutler

(PRWEB) April 19, 2005 -- Peggy Smedley is the editor of Start Magazine and will be addressing the first annual PRONTO North America Users Conference on Thursday, May 5th. Smedley was recently profiled in the Wall Street Journal and authored Mending Manufacturing, How America Can Manufacture its Survival. She is an award-winning journalist.

Wednesday, May 4th, Thomas R. Cutler, CEO of TR Cutler, Inc., author of the Manufacturers Public Relations and Media Guide, Associate Editor of Industrial Connection, and Contributing Editor to InMFG magazine will be addressing the PRONTO North America Users Conference. Cutler is also the founder of the Manufacturing Media Consortium, a group of 2000 journalists writing about various aspects of manufacturing and industrial trends.

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976.

From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the distribution sector ERP leader.

Tom Verzi
PRONTO ERP
952-942-5858
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 03:28 AM | Comments (0)

Google Offers Powerful Tools For Successful Sales On The Web

Last year, SiCap Industries was just another "start up" internet merchant. The company had a potentially huge product with only a tiny advertising budget. After experimenting with various internet marketing strategies that didn't work as planned, SiCap's management team credits "Google Adwords" program with a large part of their fast sales success.

(PRWEB) April 18, 2005 -- Last year, SiCap Industries was just another “start up” internet merchant. The company had a very unique product, but they also had a very tiny advertising budget. SiCap began operations by promoting their first product on Ebay with great success, but to keep up with the growth of their operation, the company had to find an affordable way to effectively promote their product to a much wider internet audience.

SiCap management understood they had a distinct advantage over other online retailers because they had something that was and still is, a “one of a kind” product. Known as the world’s first hot pepper nasal spray, “Sinus Buster” was quickly gaining an incredible reputation with “Ebayers” suffering from chronic sinus, allergy and headache conditions.

It turned out that Sinus Buster hot pepper nasal spray had become a miracle drug for hundreds of people suffering from a wide variety of chronic sinus and headache conditions. Although Sinus Buster was a strong seller on the Ebay auction site, Sicap management knew they had barely scratched the surface of their potential market. Their goal was to promote Sinus Buster on its’ own website and get the product into retail stores by promoting the brand via the web and through popular media.

“I knew we had a real winner here and we were making more money than I had dreamed, but we were also stuck in limbo. The founding partners were still working their regular jobs. Sinus Buster was starting to pay each of us more than our present jobs, but we weren’t making enough money to quit and go full time with SiCap. Then I started researching web marketing. Ya know, banner ads and pay per click programs. I realized most of what was out there were rip-offs and I knew from tracking our website activity where the most referral traffic was coming from. Our website (www.sinusbuster.com) was doing well in all the search engines, but it was apparent that Google was by far the biggest promoter for us. So I decided to try my hand at advertising with pay per click accounts and banner ads on several search engines. Within a month, I realized our Google ads were paying off the most, and because of them our business was up by more than 30%. So we dumped our other ads and put everything into a Google Adwords campaign. The rest is history – a very profitable history,” says Wayne Perry, founding partner of SiCap Industries, LLC.

Google “Adwords” is a pay per click service designed to match relevant keyword content with ads on the web’s number one search engine. Advertisers bid on specific keywords by establishing a top price to be paid for every “click-through” received. Basically the advertisers establish a daily budget that dictates exactly how much money is spent on the ad campaign. While “pay per click” programs traditionally have a reputation for wasting money, Google’s service is gaining a reputation as a real winner in the e-commerce biz.

“It was immediately apparent that Google Adwords were returning three dollars for every one dollar we were putting in, and everything was trackable. Some of the other advertising companies (which I won’t mention by name) were spending our money with no trackable effect. The other companies claimed to have specific click-throughs, but only the Google clicks were present on our independent web stats. We purposely used Microsoft business services so we’d have an independent source for our web traffic statistics, and Google was hands down the most worthwhile investment. We learned two things from this test. First Google was definitely pulling in sales and secondly, the other guys appeared to be lying about their click-throughs,” adds Perry.

Most online retailers have been faced with the same frustrations, false promises and suspect marketing schemes. While many online merchants have given up on “pay per click” programs and online ads in general, SiCap Industries has found a way to profit thanks to Google.

“Even in terms of simple search engine queries, Google is the biggest by far. No other search engine can touch their level of consumer power. If it weren’t for Google Adwords, I’m not so sure we would’ve come as far as we have. Of all the online advertising strategies out there, Google definitely gives you the most bang for your buck. It also appears to work better than display ads in magazines and catalogs, but of course you have to be able to write a great ad that works,” says Perry.

To find out more about Google Adwords, visit (https://adwords.google.com/select/).

To find out more about SiCap Industries and Sinus Buster Hot Pepper Nasal Spray, visit them at (www.sinusbuster.com). Samples and information kits are available to qualified media and medical personnel upon request.

Posted by Industrial-Manufacturing at 03:27 AM | Comments (0)

S. G. Hart & Associates is Interviewed by Brand Protection News on Sarbanes-Oxley Compliance, Risk Management and Brand Protection Strategies.

S. G. Hart & Associates, LLC, The Brand Equity Protection Company TM, is featured in the April 6th edition of Brand Protection News, a PIRA International Publication. In the article, S. G. Hart & Associates discusses its thought leadership pertaining to brand protection and the need for an overall risk management posture that is required of public companies under the auspicious of The Sarbanes-Oxley Act of 2002 (SOX). The article further highlights S. G. Hart & Associates’ newest educational offerings targeted to key decision makers, including board of directors and senior managers, who are seeking further information on how SOX effects brand owners’ responsibilities in combating counterfeiting and product diversion in order to protect stakeholder value.

Ridgefield, CT (PRWEB) April 18, 2005 -- S. G. Hart & Associates, LLC, The Brand Equity Protection Company TM, is featured in the April 6th edition of Brand Protection News, a PIRA International Publication. In the article, S. G. Hart & Associates discusses its thought leadership pertaining to brand protection and the need for an overall risk management posture that is required of public companies under the auspicious of The Sarbanes-Oxley Act of 2002 (SOX). The article further highlights S. G. Hart & Associates’ newest educational offerings targeted to key decision makers, including board of directors and senior managers, who are seeking further information on how SOX effects brand owners’ responsibilities in combating counterfeiting and product diversion in order to protect stakeholder value. Visit www.sghartassociates.com to sign-up and participate in the April 28, 2005 web cast.

Stanley G. Hart, President & CEO of S. G. Hart & Associates, explains the need for a comprehensive brand equity protection plan in order to meet the disclosure and internal control requirements of sections 302 and 404 under SOX, “brand protection is an important element of compliance with SOX that goes beyond technical solutions and security features, which are just one piece of the puzzle. Brand owners need to have an overall risk-management system in place.” Anthony M. Miano, Executive Partner, echoed Hart’s assessment and made the additional observation that “by forcing companies [to comply with SOX to look at internal / external business processes that relate to brand protection initially not on the SOX radar screen could lead to benefits that can provide a unique competitive advantage and simultaneously satisfy the new regulations.”

For those seeking further information, S. G. Hart & Associates has planned a series of educational, on-line “Web Casts” focusing on the Sarbanes-Oxley Act of 2002 and the brand protection disclosure and internal control requirements that apply. Participant registration for these Web Casts is available through the company’s website at www.sghartassocates.com along with presentation dates and times.

The Sarbanes-Oxley Act of 2002 (SOX) is U.S. legislation that was signed into law by President George W. Bush during on July 31, 2002. The purpose of SOX is to re-instill confidence and trust in the corporate accounting reporting practices used to evaluate publicly traded companies of the United States. U.S. public companies with equity market capitalization over $75 million are required to comply with the new SOX amendments beginning with their first fiscal year ending on or after November 15, 2004. Non-accelerated filers must begin to comply with these requirements for their first fiscal year ending on or after July 15, 2006.

About S. G. Hart & Associates, LLC
S. G. Hart & Associates, The Brand Equity Protection Company TM, is based in Ridgefield, Connecticut, USA. S. G. Hart & Associates is a global brand protection consulting company helping clients develop and implement strategies that protect supply chains from the disruptions caused by counterfeiting, product diversion, tampering & theft. S. G. Hart & Associates ensures that the integrity of the firm’s most valuable asset – its brand - is secure, that the brand’s ability to generate and preserve revenue is maximized and that effective controls are used to safeguard the branded asset against unauthorized or improper use.

About PIRA International
PIRA is a leading commercial consultancy, testing and media business which specializes in retail supply chain technologies related to industries such as packaging, paper, plastics, printing, publishing and consumer goods. PIRA has established a reputation as one of the key knowledge providers in these industry sectors.

Media Contacts:
Director, Public Relations
S. G. Hart & Associates, LLC
31 Bailey Avenue, Suite 5
Ridgefield, CT 06877 USA

Tel: 203-438-4300
Fax: 203-438-3222
Email: e-mail protected from spam bots
Web: www.sghartassociates.com

PIRA International

Randalls Road
Leatherhead
Surrey, KT22 7RU United Kingdom

Tel: +44 (0) 1372 802000
Fax: +44 (0) 1372 802238
Email: e-mail protected from spam bots
Web: www.pira.co.uk

Posted by Industrial-Manufacturing at 03:27 AM | Comments (0)

Our Digital CD Catalog System; the Best, Most Cost Efficient Product Sales Tool. Many High-tech Options that’s Fully Customizable; Easily Adapts to Most Databases

The SIP Studio PRODUCTCD Digital Marketing System provides an inexpensive, highly efficient way to organize and present large product lines to prospects, and enables fast and easy ordering. This technologically advanced catalog CD software sales tool has many advantages over conventional printed catalogs in all aspects of development, mailing and time sensitive updates of your product.

(PRWEB) April 18, 2005 -- The SIP Studio PRODUCTCD (ProductCD.com) Digital Marketing System provides an inexpensive, highly efficient way to organize and present large product lines to prospects, and enables fast and easy ordering. This technologically advanced catalog CD software sales tool has many advantages over conventional printed catalogs in all aspects of development, mailing and time sensitive updates of your product.

The system organizes and displays up to 3,000 products, presented by product group, in a format that allows the user to find the exact product they need in a matter of seconds. Our product offers a host of options, including Flash animated intro, video and audio to expand your sales pitch.

SIP STUDIO marketing company was challenged by a client's need to develop a cost-effective, technologically advanced plus user-friendly CD marketing digital catalog to replace their existing printed catalog. Our internet research yielded nothing that matched our client's criteria. So we were on our own.

Our team, including a top-notch applications developer, created this cd catalog program that surpassed all expectations, for our client, their customers and for us. And now we can offer this advanced marketing tool to help grow your company.

We know you will be impressed by all the features, including how affordable this marketing system can be and easy to update, add and delete items in a timely manner. SEE FOR YOURSELF! We almost guarantee that you will not ever have to print another conventional printed catalog.

We offer different cost options that best suites your needs, from our BASIC Product CD Catalog to any number of custom features that will not only impress your customers, but will make purchasing easier than ever before.

It fits on one standard CD, so it is inexpensive to duplicate and distribute. It runs from the CD, so a user doesn’t even have to be online to use it. Customers can print an Order by Fax form, or they can choose to link directly to your website, or they can opt to send you an e-mail for additional information.

Our system uses standard Microsoft Access database through our custom programming makes it more efficient to add, change or delete products.

The system has also been created with the future in mind. It is very simple to add and delete products as needed, and elements of functionality can simply be added at a later date, without expensive re-programming or re-configuring.

We are available to answer any questions, and would be glad to provide you with a very brief demonstration. Just visit our site at: www.productcd.com

Posted by Industrial-Manufacturing at 03:26 AM | Comments (0)

Design Engineers in the ETO Environment

Design Engineers in the ETO Environment

(PRWEB) April 18, 2005 -- According to Roger Meloy of ETO ERP leader Encompix, based in Cincinnati, OH, “If you ask design engineers what an ERP system means to them, you are likely to hear something like “nothing” or “more work.” To most design engineers, an ERP system is either irrelevant or it is perceived as something that requires additional time and effort, often providing little or no value. One reason for this perception is that most ERP systems are not integrated with the design engineer’s drawing tool.

Traditional ERP systems were developed for the repetitive, make-to-stock manufacturer, where there is a clear demarcation between design and production. In that environment the engineer designs the product in a CAD application. After testing and prototyping, the product is released to production, which is managed by the ERP system.

The design engineer has little or no interaction with the ERP system and works quite happily in a CAD environment. Following the work of the design engineer, a production engineer then creates a bill of material (BOM), based not on how the product is designed but how it will be manufactured.

In the Engineer-to-Order (ETO) world the role of the design engineer is very different. By its nature an ETO company builds a unique product designed to meet the specification of a single customer. The two worlds of design and manufacturing are closely linked. In many cased the design of the product continues through the product process (design-in-process), incorporating a multitude of engineering changes. These changes can be driven by the customer or by the manufacturer. In this environment a seamless flow of data between engineering and production is critical. An ETO company must integrate CAD and ERP.

Encompix (www.encompix.com) has filled the manufacturing software requirements of Engineer-to-Order companies since 1992. The company name reflects our commitment to developing business application solutions that encompass the complex areas of project-based and job-based manufacturing.

Encompix provides ETO manufacturers with a competitive advantage by improving bottom line results.

Posted by Industrial-Manufacturing at 03:25 AM | Comments (0)

E-Kanban: Blanket Purchase Orders

E-Kanban: Blanket Purchase Orders

(PRWEB) April 18, 2005 -- Blanket Purchase Orders are a “best practice” in the well-oiled kanban process. They minimize the flow of information between buyers and their suppliers, while maintaining the terms, conditions and integrity of the business relationship between the two parties. Datacraft Solutions (www.datacraftsolutions.com), the leader in e-kanban, found that while managing a large number of suppliers with many part numbers, managing the integrity of blanket purchase orders become an issue. For every given kanban release it is important to make sure that: an open purchase order still exists, and that there was enough remaining balance on the purchase order to cover the current purchase. The new Best Practice was “integrating the electronic kanban system” with a manufacturers current purchasing system. Kanbans are now guaranteed never to be sent to supplier unless there is a valid blanket purchase order.

Fax Kanban is not Efficient and not Lean

At ten minutes per fax, someone is spending 3.5 hours per day in administration time. That inefficiency results in less time to utilize more suppliers or improve the relationships with existing suppliers.

Furthermore, even if 99% of those faxes are trouble free procurement signals, four faxes per month are going to be problematic and dilute the entire rationale for a lean manufacturing operation. Suppliers claim they did not receive the fax kanban; suppliers cannot make the shipment date requested and expedited shipping fees are incurred, or worse, there will be a stockout which will negatively impact customer service levels.

According to Sam Bayer, President of Datacraft Solutions Process improvements with existing suppliers will further reduce lead times and inventory levels and bring more suppliers onto the system.

Datacraft Solutions
www.datacraftsolutions.com
Sam Bayer
e-mail protected from spam bots
919-667-9804

Posted by Industrial-Manufacturing at 03:23 AM | Comments (0)

E-Z-MRP Offers Leasing with New Two-Tier Pricing Structure

E-Z-MRP Offers Leasing with New Two-Tier Pricing Structure

(PRWEB) April 18, 2005 -- E-Z-MRP, the leading manufacturing software system for small manufacturers, announced effective April 15th, there will be a new pricing and product structure. According to Rocky Smolin, founder of Beach Access Software, makers of E-Z-MRP, “We see a distinction between those small manufacturers with less than five hundred parts in material resource planning, and those with a need for unlimited part numbers.”

Smolin noted that some manufacturers will start with the under 500 parts version of E-Z-MRP, priced at $2995, and grow into the new unlimited version, priced at $9800. Beach Access Software credits the $2995 for customers who later choose to upgrade. Other small manufacturers who presently have more than five hundred part will start right away with the E-Z-MRP Unlimited version.

To accommodate the new pricing structure E-Z-MRP offers a Leasing program that ensure a rapid Return-on-Investment.

- Lease E-Z-MRP with two full years of support for just $169.96 per month.
- Lease E-Z-MRP Unlimited with two full years of support for just $495.00 per month.
For more information visit the company’s web site: http://www.e-z-mrp.com, or call 858-259-4334.

Small manufacturers with more than one hundred parts can no longer manage the manufacturing process on an Excel spreadsheet. Since more than 84% of all manufacturers have less than fifty employees, there is a remarkable opportunity for cost-effective manufacturing systems like E-Z-MRP. Despite the extensive media coverage regarding ERP (Enterprise Resource Planning), in most cases these small manufacturers do not require all the functionality offered, nor can many afford the price point.

Somewhere between Excel and ERP is the core process for most manufacturers. By offering the two versions of E-Z-MRP, no small manufacturer will be required to purchase more software than actually needed, while still having the ability to grow into the E-Z-MRP Unlimited version.

The EZ MRP package includes a full-featured Bill of Materials processor, plus a material planning and tracking module which tracks all sales orders, forecasts, work orders (planned, firm, and released), purchase orders, shortages, raw materials and finished goods inventories. It also records a complete audit trail on all inventory transactions. Also included is a physical inventory function and a purchase order module for printing purchase orders.

E-Z-MRP runs on any Windows-based PC or network, and requires only Access 2000, Access XP, or Access 2003 to run. No on-site or remote training is required. A comprehensive user manual with tutorials provides all the required instruction.

Beach Access Software
Rocky Smolin
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:53 AM | Comments (0)

Verzi of PRONTO ERP Raves about Airey of Mississauga-Based OTI

Verzi of PRONTO ERP Raves about Airey of Mississauga-Based OTI

(PRWEB) April 18, 2005 -- OTI, Optimization Technology Inc., located in Mississauga Canada, has been developing and implementing ERP (Enterprise Resource Planning) systems since 1984. The Canadian VARs (Value Added Reseller) customer base appreciates the features built into their legacy systems which focused on individual manufacturing and distribution requirements. With the advent of GUI (Graphical User Interface) it became too difficult to add some of the new productivity features OTI and their clients wanted.

According to Dave Airey, VP of Sales and Marketing at OTI, “We started looking for a way to move our application to a GUI “look and feel,” but after two years of investigation it became obvious that it was not a practical goal. As an alternative we investigated upgrading our legacy application to a new product.”

OTI’s requirements for a new system revolved around their customers. After many years of custom changes, the legacy system was geared to client requirements.

Airey noted, “OTI’s initial search took us to the major ERP players, but none had the features we required to support our loyal customers.”

Finding an ERP System with Strong Functionality:
The search for a new ERP system ended when OTI was introduced to PRONTO North America (www.PRONTOerp.com). According to Airey, “We were introduced to Pronto and were immediately impressed with the rich functionality. One important feature was that Pronto is fully integrated. We had engineered our legacy system to be fully integrated so this was of major importance.”

The Rationale for PRONTO ERP:

- Fully integrated
- User definable options to tune the systems functionality
- A support system to back up our customers
- Functionality
- GUI look and feel built using a 4 GL tool
- Equipment rentals and tracking
- Service maintenance
- Both Manufacturing and Distribution in one package
- Email & Fax capability
- Multiple SQL platforms including MS SQL

Additional integrated features OTI customers’ are now showing interest include:

- CRM (Customer Relationship Management)
- Advanced Warehousing
- Scan Pack
- Plant Maintenance

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the distribution sector ERP leader. Tom Verzi, Director of Marketing and Development for PRONTO expressed his appreciation of Dave Airey of OTI.

Contact Information:
Dave Airey
OTI (Optimization Technology, Inc.)
e-mail protected from spam bots

Tom Verzi
PRONTO ERP
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:52 AM | Comments (0)

PRONTO North America Users Conference to Feature Keynote Address: Peggy Smedley

PRONTO North America Users Conference to feature Keynote Address: Peggy Smedley

(PRWEB) April 18, 2005 -- Peggy Smedley is the editor of Start Magazine and will be addressing the first annual PRONTO North America Users Conference on Thursday, May 5th. Smedley was recently profiled in the Wall Street Journal and authored Mending Manufacturing, How America Can Manufacture its Survival. She is an award-winning journalist.

Wednesday, May 4th, Thomas R. Cutler, CEO of TR Cutler, Inc., author of the Manufacturers Public Relations and Media Guide, Associate Editor of Industrial Connection, and Contributing Editor to InMFG magazine will be addressing the PRONTO North America Users Conference. Cutler is also the founder of the Manufacturing Media Consortium, a group of 2000 journalists writing about various aspects of manufacturing and industrial trends.

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the distribution sector ERP leader.

Tom Verzi
PRONTO ERP
952-942-5858
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:51 AM | Comments (0)

April 17, 2005

NuDeal.com Announces Improved International Trade Services

NuDeal.com, A leading trade information portal, has launched an updated version of its popular international trade service.

Vancouver, BC (PRWEB) April 17, 2005 -- NuDeal.com, a leading international trade service, has released an enhanced version of its popular trade site. New features include improved search, a new membership control panel, product catalogs, and hundreds of new trade resource listings. http://www.NuDeal.com

Thousands of businesses and individuals use NuDeal.com daily to connect with suppliers and buyers in the global marketplace. Online since 1998, NuDeal.com continues to grow as one of the best trade destinations on the Internet.

"Our new search and product catalog features offer members the enhanced functionality they want" said Diane Jones, Director of Business Development for NuDeal, "We expect to see hundreds of new product listings within the first few days of the feature being available."

About NuDeal.com
NuDeal facilitates international trade and business to business advertisement through its popular trade portal. Our service provides a simple way for small, medium and large businesses to gain international exposure and connect with potential partners worldwide.

To learn more visit us at:
http://www.NuDeal.com/New/Resources/AboutUs.aspx

Posted by Industrial-Manufacturing at 11:25 PM | Comments (0)

There’s No Need to Spend Hours Training Employees - Scale Operators Will Quickly Feel Confident in the TC-2010 Parts Counting Scale Operations

The new TRANSCELL TC-2010 Counting Scale is built with precision workmanship and high quality components. It represents a new and practical approach to controlling counting accuracy.

(PRWEB) April 17, 2005 -- The new TRANSCELL TC-2010 Counting Scale is built with precision workmanship and high quality components. It represents a new and practical approach to controlling counting accuracy. Over 30 years of industrial counting scale experience and considerable field testing are reflected in the features and controls. The TC-2010 brings you the first electronic counting scale specifically designed to overcome parts counting inefficiencies which directly leads to improved profits.

Counting accuracy is a topic of paramount importance in US manufacturing. It has long been realized that inaccuracies in the stockroom will have a negative effect on profits and ultimately the bottom line. The TC-2010 incorporates distinctive features that allow you control over the counting process and control of your inventory count accuracy. The TRANSCELL TC-2010 counting system can take you to the summit of your parts counting goals.

There’s no need to spend hours training employees on the operation of the TC-2010. Utilizing color coded keys, and easy to follow prompting, scale operators will quickly feel confident in the TC-2010 operations.

For more information:
http://salter-brecknell.centralcarolinascale.com/TC-2010.htm

Posted by Industrial-Manufacturing at 11:24 PM | Comments (0)

Scott Specialty Gases Supports National Security with National Defense Industrial Association

Scott Specialty Gases supports national security with National Defense Industrial Association

Plumsteadville, PA (PRWEB) April 17, 2005 -- Scott Specialty Gases recently announced it is further supporting its growing line of Homeland Security products by joining the National Defense Industrial Association (NDIA). NDIA provides academic, industrial, military and governmental communities the opportunity to address issues and policies critical to the strength of the defense industry and the preservation of United States national security. With a membership base of 1,100 corporate members and 36,000 individuals, the association provides a forum to increase knowledge and to network with prominent individuals and technology leaders in various specialized fields.

Scott is actively involved in the defense industry, working with the U.S. Military, research institutions and private industry to develop gases used to calibrate instruments that detect toxic industrial compounds (TICs). Homeland Security products engineered by Scott are in addition to first-response and industrial safety products that include numerous types of calibration gases used by a wide variety of instruments. Scott products provide reliable calibration of detectors to ensure fast, on-scene detection, identification and quantification of TICs. Scott's Technical Services Group works with customers to develop custom products that meet highly specialized application requirements.

Scott Specialty Gases is the sole-source producer of gaseous SRM candidates for NIST and is the world's largest supplier of EPA protocol gases. The company is a worldwide supplier of pure and mixed gases for applications that include natural gas, environmental, laboratory, industrial, petrochemical, medical and semiconductor applications. Scott maintains numerous manufacturing facilities in both the U.S. and Europe. Here at scottgas.com - the specialty gas industry's largest website - we feature online ordering, eScott Online Supply Chain Management and other innovative eTools that empower Scott customers to substantially reduce operating costs.

For more information about Scott Homeland Security products, as well as other Scott products and services, browse the website http://www.scottecatalog.com, call 800-21-SCOTT, or email to e-mail protected from spam bots.

Posted by Industrial-Manufacturing at 11:23 PM | Comments (0)

Scott Specialty Gases Develops Growing Array of Calibration Products for Homeland Security Applications

Scott Specialty Gases develops growing array of calibration products for Homeland Security applications

Plumsteadville, PA (PRWEB) April 17, 2005 -- Scott Specialty Gases recently announced it has expanded its product line to include calibration gases for instruments used to detect chemical warfare agents (CWAs). Scott's increasing involvement in Homeland Security is a result of requests from the U.S. Military and from companies that are developing specialized instruments and detectors to identify CWAs. Some of the products are "standard" gas mixtures such as cyanogen chloride, phosgene and hydrogen cyanide. Scott's Research and Development and Technical Services groups also work with customers to develop custom products to meet highly specialized application requirements.

Scott Specialty Gases currently partners with INFICON, who provides vital chemical identification systems for immediate, on-site detection and analysis of volatile organic compounds (VOC), such as toxic industrial chemicals and chemical warfare agents, in air, water, and soil. INFICON's HAPSITE® Smart Chemical ID System is used at home and overseas to provide fast, on-scene detection, identification and quantification of toxic industrial chemicals (TICs) and CWAs. SCOTTY® Transportables, manufactured by Scott, are at the heart of this remarkable GC/MS. Containing both calibration and carrier gases, Scott's products are an integral feature of the HAPSITE Smart's portability and ease-of-use.

Scott Specialty Gases is a member of the National Defense Industrial Association (NDIA), the sole-source producer of gaseous SRM candidates for NIST and is the world's largest supplier of EPA protocol gases. The company is a worldwide supplier of pure and mixed gases for applications that include natural gas, environmental, laboratory, industrial, petrochemical, medical and semiconductor applications. Scott maintains numerous manufacturing facilities in both the U.S. and Europe. Here at scottgas.com - the specialty gas industry's largest website - online ordering, eScott Online Supply Chain Management and other innovative eTools are featured to empower Scott customers to substantially reduce operating costs.

For more information about Scott products and services, browse the website http://www.scottgas.com/, call 800-21-SCOTT or email to e-mail protected from spam bots.

Posted by Industrial-Manufacturing at 11:23 PM | Comments (0)

Fenwal Introduces New Intermittent Pilot Gas Ignition Controls

Fenwal introduces two new products to its existing series of gas ignition controls. The new Fenwal 35-73 and 36-63 Intermittent Pilot Gas Ignition Controls are ideal for use in commercial cooking equipment, HVAC and hydronic systems, boilers, and furnace applications. Both are available in line voltage and 24 VAC.

Ashland, MA (PRWEB) April 16, 2005 -- Fenwal Controls, Inc., a leading manufacturer of standard and customized automatic gas ignition and temperature controls for commercial and industrial OEM customers, introduces two new products to its existing series of gas ignition controls. The new Fenwal 35-73 and 36-63 Intermittent Pilot Gas Ignition Controls are ideal for use in commercial cooking equipment, HVAC and hydronic systems, boilers, and furnace applications. Both are available in line voltage and 24 VAC.

Fenwal’s Intermittent Pilot Gas Ignition Controls are microprocessor-based and polarity insensitive for easy installation. Featuring precise, repeatable timing sequences, they provide TFI times up to 120 secs, local and remote flame sense options, thermostat/power off and automatic reset options, and on-board diagnostics with LED blink code output to simplify troubleshooting.

Suitable for controlling pilot and main gas valves, monitoring flame, and igniting LP and natural gas burners in a variety of equipment, Fenwal’s Intermittent Pilot Gas Ignition Controls are CSA certified and available in three configurations: bare board, with case and cover, and potted version (35-73 only) for wash down and extreme vibration protection.

Free samples configured to specific application requirements are available to qualified OEMs directly from Fenwal’s manufacturing facility in Ashland, Massachusetts. Detailed literature can be found at www.fenwalcontrols.com. Pricing, availability and stocking programs for production volumes are available upon request.

For more information or to qualify for a free sample, contact Fenwal Controls at 1-800-FENWAL-1or go to www.fenwalcontrols.com.

About Fenwal Controls
Founded in 1935 as the manufacturer of the patented THERMOSWITCH® temperature controller, Fenwal Controls (www.fenwalcontrols.com) now offers a broad range of agency-approved gas ignition and temperature controls. Fenwal Controls has a long history of providing standard and custom engineered solutions for many industries including HVAC, hydronics, commercial cooking, and fire protection. Fenwal Controls is a division of Kidde-Fenwal and has both domestic and international sales offices.

Posted by Industrial-Manufacturing at 11:22 PM | Comments (0)

Kia Heavy Industries and Hyundai Machine Tools Join Forces with the Formation of Hyundai-Kia Machine America Corporation

Kia Heavy Industries and Hyundai Machine Tools, both individually well known and respected in the United States and worldwide as important manufacturers of metal cutting machines, will henceforth join forces under the new name of Hyundai-Kia Machine America Corporation. The new company will be headquartered at the East Rutherford, New Jersey office. They will also be maintaining a technical and sales center in Chicago, Illinois.

Rutherford, NJ (PRWEB) April 16, 2005 -- Two Well-Known & Respected Machine Tool Manufacturing Companies Kia Heavy Industries and Hyundai Machine Tools Join Forces with the Formation of Hyundai-Kia Machine America Corporation

Kia Heavy Industries and Hyundai Machine Tools, both individually well known and respected in the United States and worldwide as important manufacturers of metal cutting machines, will henceforth join forces under the new name of Hyundai-Kia Machine America Corporation. The new company will be headquartered at the East Rutherford, New Jersey office. They will also be maintaining a technical and sales center in Chicago, Illinois.

Kia Heavy Industries was founded in 1976 as a subsidiary of Kia Motors. Kia Heavy Industries USA Corp. was established in 1989 and has been engaged in the sale, import, and export of machining tools, as well as parts & service. In 1999 Hyundai Motors took over Kia Motors maintaining both brands. With a network of dealers and a product line of over 50 machines including CNC turning center, CNC boring machine as well as horizontal and vertical machining centers, Kia has consistently stood ready to meet their customer’s needs with strong sales, service and parts supplies. These 15 years of effort have positioned Kia as one of the leading companies in the US metalworking industry.

Hyundai Machine Tools was founded in 1990 by Hyundai Motors, who then established Hyundai Machine Tools America in 1994. Hyundai Machine Tools has been producing nearly 3600 units per year ranging from various CNC machines - lathes, vertical turning centers, vertical machining centers, horizontal machining centers, and large vertical lathes.

Hyundai-Kia Machine foresees strong growth in the US market having combined the strengths of Hyundai Machine Tools and Kia Heavy Industries. They have a large installed base in a wide range of industries including automotive parts, aircraft parts, presses, industrial machinery, robots as well as many others. With their extensive, highly productive and respected line of economical turning centers, and their increased technical support their outlook is good for the coming years.

Posted by Industrial-Manufacturing at 11:21 PM | Comments (0)

Marubeni Citizen-Cincom Proudly Announces the 5,000th Swiss Type Machine Installation in the United States

Marubeni Citizen-Cincom, Inc. is proud to announce the installation of its 5,000th. Swiss-type lathe in the United States. Carolina Precision Manufacturing, located in Mooresville, North Carolina, is the recipient of this milestone machine sale. Carolina Precision is a manufacturer of safety equipment and currently has 16 Citizen Machines in its facility.

Allendale, NJ (PRWEB) April 16, 2005 -- Marubeni Citizen-Cincom, Inc. is proud to announce the installation of its 5,000th. Swiss-type lathe in the United States. Carolina Precision Manufacturing, located in Mooresville, North Carolina, is the recipient of this milestone machine sale. Carolina Precision is a manufacturer of safety equipment and currently has 16 Citizen Machines in its facility.

Mr. Atsuya Abe, President of Marubeni Citizen-CINCOM presented Mr. Gary Bruner, President of Carolina Precision, a Citizen clock and a special certificate proclaiming the L-32 Model recently installed as the official 5,000th Citizen in the states.

Marubeni Citizen-Cincom was founded in 1984 to market and service Citizen’s CINCOM (CItizen Numerically COntrolled Machines) family of Swiss-type turning centers. This venture represents the amalgamation of two of Japan’s largest and most highly regarded companies, Marubeni Corp. and Citizen Watch Company.

Since its inception, MCC has successfully made CINCOM machines the most widely accepted Swiss-type turning centers in the world. These machines are used extensively to manufacture an array of products, including medical instruments, electronics, fiber optics, automobiles, business machines, aerospace, defense, firearms, tools, valves, fasteners, and many others.

In the US, MCC is headquartered in Allendale, NJ, and maintains sales-service offices in both California and Illinois. These three offices are responsible for supporting a nationwide network of 26 distributors located throughout the United States.

For more information on the full line of Citizen Machines and for the Distributor closest to you, please log on www.marucit.com.

Posted by Industrial-Manufacturing at 11:20 PM | Comments (0)

April 15, 2005

No Offense, But You Smell: An Odious Job for HR Professionals is Confronting Employees About Body Odor, HR.BLR.com Poll Finds

A recent online poll at HR.BLR.com found that it’s usually the human resource professional who gets stuck with the uncomfortable task.of telling a co-worker that he or she has offensive body odor. Three out of four HR managers responded yes to the question: “Have you ever had to confront an employee about body odor?” .

Old Saybrook, CT (PRWEB) April 15, 2005 -- Telling a co-worker that he or she has offensive body odor is not a pleasant job for anyone – but as the guardians of all things having to do with people, it’s usually the human resource professional who gets stuck with this uncomfortable task.

HR.BLR.com (“State HR Answers and Tools Online”) asked human resource managers in an online poll: “Have you ever had to confront an employee about body odor?” Of the 633 participants, 74 percent said yes; 26 percent said no. The poll was conducted March 24-31.

“When our subscribers pose HR policy questions to us, it’s striking how often they ask for guidance on how to deal with this issue,” said HR.BLR.com Managing Web Editor Kevin Flood. “They need to address something that’s disrupting the workplace, but they also want to do it with a minimum of embarrassment – to themselves, and to the employee.”

While there is no “rulebook” for confronting an odorous employee, HR.BLR.com offers these tips to employers:

· You must talk to the employee – not leave an anonymous note or a can of deodorant on his desk. Just hold the conversation privately, discreetly, and with as much sensitivity as possible.

· Realize that diet or a medical condition might be responsible for the problem. You might suggest, therefore, that the employee visit a doctor. You might also bring the company nurse into the conversation, if you have one.

· Stress that this isn’t merely a personal matter – it’s a workplace disruption that must be dealt with.

· Don’t be upset if the employee, out of embarrassment, seeks to end the conversation as soon as possible. Just schedule a follow-up meeting in a few days to make sure the problem is being resolved.

Ultimately, making one employee uncomfortable now will help to retain others. For more tips on retention, download “99 Ways to Manage Employees,” a free special report from Business and Legal Reports: http://www.blr.com/82008400/PRS10

About BLR
Old Saybrook, Conn.-based BLR produces plain-English compliance and training resources for HR, compensation, safety, and environmental managers. For more information and a free catalog, call 800-727-5257 or visit www.BLR.com.

Contact: HR.BLR.com Managing Web Editor Kevin Flood

860 510-0100 x 2283

Posted by Industrial-Manufacturing at 02:47 AM | Comments (0)

Creative Materials Announces Expansion

New lab space, new sales reps to serve increasing customer demands for custom materials.

Tyngsboro, MA (PRWEB) April 15, 2005 -- Creative Materials Inc. has recently expanded its research and development laboratory located in Tyngsboro, Massachusetts, and hired six new sales representatives in North America. The laboratory is used to custom formulate conductive adhesives, coatings and inks, as well as encapsulants, used in applications for the microelectronics, biotechnology, electronics, electrical, medical, automotive, telecommunications and aerospace/defense markets. Current R&D projects include developing new materials for RFID technology, Department of Defense applications and medical research devices.

By working closely with customers, Creative Materials reduces the time it takes for a manufacturer to develop a new product from prototype to full-scale production. Sales representatives have been added to provide local customer support in the following territories: Ontario, Canada; Florida and Puerto Rico; Minnesota, the Dakotas, and Western Wisconsin; Michigan; Mexico, Texas, New Mexico and Oklahoma.

“We are pleased to add representation in key areas of North America, because the closer we get to the customer, the better we can support and serve them,” said Ron Lilly, Vice President of Sales and Marketing. “We continue looking for experienced sales reps in the Midwest, Northwest and Southeastern states other than Florida.”

“With our new lab, we can support our customers’ growing spectrum of applications, and respond quickly to their inquiries. This will give us the opportunity to explore new technologies,” said Victor Borges, manager of technical services. “If a customer needs a new material formulation to build their product, we can make it, or we can reformulate one of our 1,000 plus existing products.”

Creative Materials has built a reputation for excellence in quality and consistency of its products. “When we make a product, it’s the same every time,” Borges said. “Our customers’ success depends upon our consistency. I am very pleased with our new laboratory because it provides my team with the space and equipment we need to do excellent work.”

About Creative Materials, Inc.
Creative Materials, Inc. develops and markets specialty chemical products to customers world-wide. Founded in 1986, Creative Materials has its headquarters and production facilities in Tyngsboro, Massachusetts. Products from Creative Materials are used to manufacture electronic components for automobiles, computers, keyboards, and cell phones; medical electrodes and medical instruments; heating equipment; and aerospace devices. Creative Materials offers more than 1000 product formulations, and is ISO 9001 certified. For additional information please visit http://www.creativematerials.com/.

Posted by Industrial-Manufacturing at 02:47 AM | Comments (0)

Uncovered Window Wells Trap Children

Uncovered window wells become even more hazardous this time of year, as children start playing—and exploring—outdoors. The cure can create new safety hazards if covers are bolted or locked down to prevent emergency egress from the basement.

Denver, CO (PRWEB) April 15, 2005 -- Uncovered window wells become even more hazardous this time of year, as children start playing—and exploring—outdoors. The cure can create new safety hazards if covers are bolted or locked down to prevent emergency egress from the basement.

“Buy a cover that supports adult weight, locks from the outside to keep out intruders and overly-curious kids, and unlocks from the inside if you need to get out of your basement in a hurry,” advises custom window well cover manufacturer Glynn Kierstein.

“A quality-built window well cover will provide many years of peace of mind and protection for a very modest investment—especially when considering the price you may pay for poor quality or no protection at all,” adds Kierstein, maker of the Coverwell™ custom window well cover.

Selecting a suitable window well cover can be perplexing. Following are tips to help you decide:

1. Address strength and durability. Generally, the more you’re willing to spend, the more strength and longevity you buy. If you want the cover to support the weight of a child or adult, a major safety consideration, you’ll want a higher-end plastic or metal cover. And, how long does it need to last without discoloring or falling apart?

2. Assess less-obvious functionality. Other important functional issues include sloping to allow water run off, ability to cover windows that extend above the walls, construction that prevents wind vibration, and ability to eliminate up to 15% of heat loss through the windows. Think about what you want the cover to cover in terms of specialized functional needs.

3. Assess aesthetics. A good-looking window well cover can add to property value. Think about form versus function. If, for example, you want the cover to look good for appraisal or resale purposes, buy accordingly.

4. Consider security. Crime statistics show that 4% of burglars gain access through basement windows. Think about the security benefits of a locking window well cover.

5. Consider emergency safety. Think about egress issues when buying a cover. Type of installation and locking systems will determine the ability to exit in case of a fire or other emergency.

6. Get fit. Decide how well you want the cover to fit, both a form and function consideration. Well-fitting covers help ensure best function (e.g., no gapping that allows in excessive moisture) and, obviously, can look better than the result of fitting a square peg into a round hole.

7. Examine ventilation. Proper ventilation prevents condensation and heat buildup. Determine the importance of ventilation and buy accordingly.

8. Get light. Some covers block considerable light—either because of the type of construction or rapid discoloration. Decide how much light you want, and select a cover that won’t easily discolor.

9. Mount up. Think about whether the cover will be mounted to the well or wall. Generally, the less standard your requirements, the more customization will be required.

10. Clean up. Ease of cleaning either the well or the cover should be factored into the buying decision. Easy cover removal, self-cleaning aspects and portability are factors to consider.

A well-covered window well can add peace of mind, safety, security and value to your property.

For more information, visit www.coverwell.com; or contact Kierstein tollfree at 1-877-772-4251 (303-429-7002 inside Colorado).

Posted by Industrial-Manufacturing at 02:45 AM | Comments (0)

Guden Introduces Leg Leveling Glides

H. A. Guden Co., Inc. introduces a new line of Leg Leveling Glides available in a variety of sizes and shapes. The addition of glides to Guden’s offerings is part of their ongoing effort to supply more and more industrial hardware components to designers and engineers with little time to search for individual sources.

Ronkonkoma, NY (PRWEB) April 15, 2005 -- H. A. Guden Co., Inc. introduces a new line of Leg Leveling Glides available in a variety of sizes and shapes. The addition of glides to Guden’s offerings is part of their ongoing effort to supply more and more industrial hardware components to designers and engineers with little time to search for individual sources.

Guden’s Leg Leveling Glides are available in heights of 1.00” to 2.50” with base diameters of .875” to 1.70”. Other features include hex or round bases, swivel or rigid stems, and slotted or square points for making height adjustments. In terms of durability, the glides are made of zinc-plated steel with metal or rubber feet. Guden can also supply custom glides to meet a customer’s individual requirements.

Some of the many applications for Leg Leveling Glides include furniture, dividers, sheet metal enclosures, point-of-purchase displays, gaming units, shelving, cabinetry, vending machines, appliances and kiosks.

Technical drawings, purchasing and immediate delivery are all available by phone, fax and online at www.guden.com.

Established in 1920, Guden is an ISO 9000:2000 Registered Company.

For more information, contact H. A. Guden Co., Inc., 99 Raynor Avenue, Ronkonkoma, NY 11779-6634, 800-344-6437 or Fax 631-737-2933, info@guden

Posted by Industrial-Manufacturing at 02:43 AM | Comments (0)

Israel Diamond Institute Emphasizes New Trends at BASELWORLD

The Israel Diamond Institute (IDI) annual breakfast press conference at BASELWORLD 2005 will focus on some of the newest trends in today's diamond industry

(PRWEB) April 15, 2005 -- The Israel Diamond Institute (IDI - http://www.diamond-il.co.il) annual breakfast press conference at BASELWORLD 2005 will focus on some of the newest trends in today's diamond industry. The press conference, to be held on April 1st, 2005 at 8:45am in the Osaka Samarkand Congress Room of the Basel Convention Center, will present a a look at "Challenges Facing the Diamond Industry in the Luxury Product Market" by Shmuel Schnitzer, President of the Israel Diamond Exchange and the World Federation of Diamond Bourses. In addition, a panel discussion on "Trends in Fancy Colored Diamonds" will feature representatives of two of Israel's leading companies in this field: Eden Rachminov of Rachminov Diamonds and Shmuel Polnauer of Herskovits & Polnauer Ltd.. The press event will be held under the auspices of Israel's Ambassador to Switzerland, Mr. Aviv Shir-On, and will be attended by the Economic Attache to Switzerland, Joseph Akerman.

IDI will once again have its traditional PR booth at the Basel fair in Hall 3.1, Stand NO1. In addition, a strong presence of Israeli diamantaires will be felt, with dozens of Israeli diamantaires exhibiting independently, mainly in Halls 3 and 6. Among the companies exhibiting are: A. Schwartz & Sons (M30), Afic Diamond Ltd. (C30), Avi Paz Fancy Ltd. (M11), Dalumi Diamonds Ltd. (G38), Dany Avlas Diamonds (C10), E.F.D. Diamonds Ltd. (D11), Fancy Diamonds Herskovits & Polnauer Ltd. (D21), Gemerald Ltd. - S. Juwal & Co. (C10), Gemstar-Eshed (C14), Kristal Diamonds Ltd. (D21), M. Schnitzer & Co. (E44), Rachminov Diamond Co. Ltd. (H50), Schachter & Namdar Group (C33), The Fourever Concept (C20), Tzoffey's (G40) and Yei-Yahalomei Espeka International Ltd. (M44).

IDI Chairman Simcha Lustig said that this year the Israel diamond industry would be looking towards greater penetration of European markets, in addition to continuing to develop traditional markets, such as the United States and the Far East. "Europe is a major market and the closest one to Israel geographically. Our participation in BASELWORLD, as well as in the other major European shows, underscores our keen interest in developing these markets. We intend to hold several high-level diamond trade missions to Europe in the coming months," Lustig said.

In 2004, the Israel diamond industry saw the highest level of polished exports ever, exceeding $6.3 billion. Since the beginning of 2005 polished exports have continued to rise by over 11%, and are expected to continue that trend for the full year.

For more news visit the Israeli diamond portal news section at:
http://www.diamond-il.co.il/English/news.aspx?boneID=409

Posted by Industrial-Manufacturing at 02:42 AM | Comments (0)

Research and Markets : View and Discover the Top European Manufacturing Companies Today

Research and Markets (researchandmarkets.com/reports/c15663) has announced the addition of The Top 100 Food Manufacturing Companies in Europe to their offering

Dublin (PRWEB) April 15, 2005 -- Research and Markets (http://www.researchandmarkets.com/reports/c15663) has announced the addition of The Top 100 Food Manufacturing Companies in Europe to their offering.

The food manufacturing industry is one of Europe's largest and most important industry sectors and its third-biggest employer. This report, published in March 2005, profiles the Top 100 companies in the sector. It includes companies from the British Isles, Iberia, the Benelux countries, Scandinavia, Germany, Switzerland, Austria, Italy, Greece, the Czech Republic and Poland.

This report comprises full profile information for each company, including:
- Full Company Contact Information – Addresses, Telephone and Fax numbers, Emails, Websites and Headquarters/Parent Company
- Key Company Decision Makers – from CEO and Main Board to Key Senior Managers
- Specialised Fields such as Employment, Company Activities, Turnover, Year Established, Ownership
- SIC and NAICS Classifications

Report Target Market includes:
1). Food Manufacturing Companies
Usage: Competitive/Financial Analysis and Partner/Alliance Identification
2.) Suppliers to Food Manufacturing Companies
Usage: Identification of Top Potential Customers and Key Decision Makers
3.) Food Distributors/Wholesalers/Retailers
Usage: Identification of Suppliers

Companies in this report manufacture a range of food products including:
- Dairy Products
- Frozen/Chilled Foods
- Ready-Meals/Convenience Foods
- Meat and Fish Based Products
- Potato Products
- Sauces
- Jams and Preserves
- Confectionary
- Biscuits and Cakes
- Breakfast Cereals
- Snack Foods

Note: Most companies will be fully aware of the major players in the sector, like Danone, Nestlé and Unilever but this report looks at all 100 of the top companies in the sector.

Report data field structure is as follows:
-Company Name
-Mailing Address
-Street Address
-Company Telephone
-Company Fax
-Company Email
-Company Web Address
-Parent Company Name
-Parent Company Address
-Parent Company Telephone
-Employment (Individual site/All sites)
-Top Executives
-Company Activities
-SIC Code(s)
-NAICS Code(s)
-Location Status
-Turnover €m
-Year Established
-Ownership

Reasons to read this report:
- Learn more about your target markets and target companies
- Access well-written, comprehensive and up-to-date research on all 100 major players in a market
- Identify which companies dominate your major markets

For more information visit http://www.researchandmarkets.com/reports/c15663

Laura Wood
Senior Manager
Research and Markets
e-mail protected from spam bots
Fax: +353 1 4100 980

Posted by Industrial-Manufacturing at 02:41 AM | Comments (0)

SimSci-Esscor Dynamic Process Simulation Solution Now Offers Improved Performance and Enhanced Ease of Use

The SimSci-Esscor unit of Invensys Process Systems has announced a new version of its DYNSIM dynamic simulation program. The DYNSIM software is used for engineering design and operator training. Version 4.0 of the DYNSIM software includes an improved pressure flow solution algorithm, improved data entry usability, a more powerful controller model, and thermodynamic data customisation. The DYNSIM simulator can be used in a variety of industrial process applications including refining, oil and gas processing, LNG, petrochemical, and chemical process simulation.

(PRWEB) April 15, 2005 -- Version 4.0 includes a new pressure flow solver that simplifies simulation configuration while improving performance and maintaining solution robustness. The new version is also enhanced to identify the minimum information required to develop and execute a dynamic simulation model, allowing users to quickly develop simulations without sacrificing flexibility and functionality for the advanced user. The software includes enhancements to the controller algorithms designed to enable them to more closely match the control algorithms found in actual plant control systems. Users can also interface with a thermodynamic data management system to customise component and thermodynamic data. In addition, Version 4.0 has a valve sizing utility and has been enhanced to provide more accurate vessel depressuring calculations.

As part of SimSci-Esscor’s SIM4ME common modeling environment, the DYNSIM simulator enables users to leverage simulation model equity, providing a powerful, cost-effective improvement over legacy dynamic simulators. It excels in plant simulation by allowing the use of the same model in multiple applications such as process design studies, control evaluations and checkouts, operator training, and operational analysis.

The DYNSIM software is integrated with SimSci-Esscor’s flagship PRO/II process simulation program that performs rigorous mass and energy balances for a wide range of plant processes. The solution opens and automatically translates steady-state PRO/II simulations into DYNSIM dynamic simulations. Starting from existing PRO/II simulations increases engineering efficiency since less time is required to redevelop models for each application. Also, data discrepancies can be avoided when engineers deploy the same model in each application, which increases technical accuracy and provides higher levels of overall simulation reliability.

“As part of the SIM4ME development roadmap, SimSci-Esscor continues to advance the DYNSIM product’s position as the leading dynamic simulator in the process industries with new releases that deliver significant value to our customers,” said Alastair Fraser, vice president of Invensys’ SimSci-Esscor unit. “Customers can exploit their existing model equity in the PRO/II simulations to gain advantages over the entire plant life span.” Engineers and operators can use the DYNSIM software to perform basic design studies, operational troubleshooting, control system checkouts and comprehensive evaluations of standard and emergency operational procedures. It enables superior control system design and revamp while shortening commissioning time. It can routinely help prevent production interruptions while increasing plant efficiency and safety. Operators can also use it to improve and test emergency response procedures to prevent expensive equipment damage in a risk free environment.

The DYNSIM software is part of SimSci-Esscor’s Dynamic Simulation Suite (DSS), which provides the full power of rigorous dynamic simulation and control emulation for plant engineers, operators, and managers. DSS programs include the DYNSIM simulator, the FSIM Plus Foxboro I/A emulator and the TRISIM Plus Triconex emulator.

The DYNSIM dynamic simulation program is powered by the SIM4ME common modeling environment, which is designed by SimSci-Esscor to help businesses build open computing solutions for the process industries. Based on a model-centric design, the SIM4ME environment hosts SimSci-Esscor’s comprehensive process simulation, optimization and control system emulation programs.

For more information about SimSci-Esscor, please go to
http://www.simsci-esscor.com/us/eng/company/default.htm

About SimSci-Esscor
SimSci-Esscor, an operating unit of Invensys plc, is a leader in the development and deployment of industrial process simulation software and systems for a variety of industries, including oil and gas production, petroleum refining, petrochemical and chemical manufacturing, electrical power generation, mining, pulp and paper, and engineering and construction. SimSci-Esscor solutions enable clients to minimise capital requirements, optimise facility performance, and maximise returns on investments in producing assets. SimSci-Esscor supports more than 750 client companies in more than 70 countries. For more information, visit the SimSci-Esscor Web site at www.simsciesscor.com.

About Invensys
Invensys is an automation, controls and process solutions Group working to create value for customers and investors. Our products, services, expertise and ongoing support enable intelligent systems to monitor and control processes in many different environments. The businesses within Invensys help customers in a variety of industries - including hydrocarbons, chemicals, oil and gas, power and utilities, rail, telecommunications, paper, food and beverage, dairy, pharmaceuticals and personal care - to perform with greater efficiency, safety and cost-effectiveness.

Process Systems (IPS) provides products, services and solutions for the automation and optimisation of plant operation in the process industries. APV specialises in process equipment engineered into systems and asset services for food, beverage, personal care, pharmaceutical and chemical clients. Eurotherm is a leading supplier of control and measurement instrumentation solutions and services to industrial and process customers. Rail Systems is a multinational leader in the design, manufacture, supply, installation, commissioning and maintenance of safety-related rail signalling and control systems. Climate Controls is a major provider of the components, systems and services used across the world to make commercial and residential environments safer, more comfortable and more efficient. Appliance Controls has the broadest system and component offering for the appliance industry worldwide.

The Invensys Group is headquartered in the UK and listed on the London Stock Exchange. With 35,000 employees operating in 60 countries, Invensys helps customers to improve their performance and profitability, building value for end users and shareholders alike.

Invensys;, Wonderware; Foxboro; Marcam; Triconex; SimSci-Esscor; Digital Coriolis; DolPhin; APV; and Eurotherm, PRO/II, are trademarks or servicemarks of Invensys plc, its subsidiaries and affiliated companies. All other brands and product names may be the trademarks of their respective owners.

Full details can be found at http://www.ballard.co.uk/press_releases/company_releases.aspx

Posted by Industrial-Manufacturing at 02:40 AM | Comments (0)

500 to Unlimited: Beach Access Now Offers Two Versions of the Popular E-Z-MRP

500 to Unlimited: Beach Access Now Offers Two Versions of the Popular E-Z-MRP

(PRWEB) April 15, 2005 -- E-Z-MRP, the leading manufacturing software system for small manufacturers, announced effective April 15th, there will be a new pricing and product structure. According to Rocky Smolin, founder of Beach Access Software, makers of E-Z-MRP, “We see a distinction between those small manufacturers with less than five hundred parts in material resource planning, and those with a need for unlimited part numbers.”

Smolin noted that some manufacturers will start with the under 500 parts version of E-Z-MRP, priced at $2995, and grow into the new unlimited version, priced at $9800. Beach Access Software credits the $2995 for customers who later choose to upgrade. Other small manufacturers who presently have more than five hundred part will start right away with the E-Z-MRP Unlimited version.

Small manufacturers with more than one hundred parts can no longer manage the manufacturing process on an Excel spreadsheet. Since more than 84% of all manufacturers have less than fifty employees, there is a remarkable opportunity for cost-effective manufacturing systems like E-Z-MRP. Despite the extensive media coverage regarding ERP (Enterprise Resource Planning), in most cases these small manufacturers do not require all the functionality offered, nor can many afford the price point.

Somewhere between Excel and ERP is the core process for most manufacturers. By offering the two versions of E-Z-MRP, no small manufacturer will be required to purchase more software than actually needed, while still having the ability to grow into the E-Z-MRP Unlimited version.

The EZ MRP package includes a full-featured Bill of Materials processor, plus a material planning and tracking module which tracks all sales orders, forecasts, work orders (planned, firm, and released), purchase orders, shortages, raw materials and finished goods inventories. It also records a complete audit trail on all inventory transactions. Also included is a physical inventory function and a purchase order module for printing purchase orders.

E-Z-MRP runs on any Windows-based PC or network, and requires only Access 2000, Access XP, or Access 2003 to run. No on-site or remote training is required. A comprehensive user manual with tutorials provides all the required instruction.

Leasing options are also available.

For more information visit the company’s web site: http://www.e-z-mrp.com, or call 858-259-4334.

Posted by Industrial-Manufacturing at 02:39 AM | Comments (0)

Minnesota-Based PRONTO ERP Partners With Mississauga-Based OTI

Minnesota-Based PRONTO ERP Partners with Mississauga-Based OTI

(PRWEB) April 15, 2005 -- OTI, Optimization Technology Inc., located in Mississauga Canada, has been developing and implementing ERP (Enterprise Resource Planning) systems since 1984. The Canadian VARs (Value Added Reseller) customer base appreciates the features built into their legacy systems which focused on individual manufacturing and distribution requirements. With the advent of GUI (Graphical User Interface) it became too difficult to add some of the new productivity features OTI and their clients wanted.

According to Dave Airey, VP of Sales and Marketing at OTI, “We started looking for a way to move our application to a GUI “look and feel,” but after two years of investigation it became obvious that it was not a practical goal. As an alternative we investigated upgrading our legacy application to a new product.”

OTI’s requirements for a new system revolved around their customers. After many years of custom changes, the legacy system was geared to client requirements.

Airey noted, “OTI’s initial search took us to the major ERP players, but none had the features we required to support our loyal customers.”

Finding an ERP System with Strong Functionality:
The search for a new ERP system ended when OTI was introduced to PRONTO North America (www.PRONTOerp.com). According to Airey, “We were introduced to Pronto and were immediately impressed with the rich functionality. One important feature was that Pronto is fully integrated. We had engineered our legacy system to be fully integrated so this was of major importance.”

The Rationale for PRONTO ERP:
o Fully integrated
o User definable options to tune the systems functionality
o A support system to back up our customers
o Functionality
o GUI look and feel built using a 4 GL tool
o Equipment rentals and tracking
o Service maintenance
o Both Manufacturing and Distribution in one package
o Email & Fax capability
o Multiple SQL platforms including MS SQL

Additional integrated features OTI customers’ are now showing interest include:
o CRM (Customer Relationship Management)
o Advanced Warehousing
o Scan Pack
o Plant Maintenance

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the distribution sector ERP leader.

Contact Information:
Dave Airey
OTI (Optimization Technology, Inc.)
e-mail protected from spam bots

Tom Verzi
PRONTO ERP
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:38 AM | Comments (0)

TR Cutler and Peggy Smedley to Address PRONTO North America Users Conference

TR Cutler and Peggy Smedley to Address PRONTO North America Users Conference

(PRWEB) April 15, 2005 -- Peggy Smedley is the editor of Start Magazine and will be addressing the first annual PRONTO North America Users Conference on Thursday, May 5th. Smedley was recently profiled in the Wall Street Journal and authored Mending Manufacturing, How America Can Manufacture its Survival. She is an award-winning journalist.

Wednesday, May 4th, Thomas R. Cutler, CEO of TR Cutler, Inc., author of the Manufacturers Public Relations and Media Guide, Associate Editor of Industrial Connection, and Contributing Editor to InMFG magazine will be addressing the PRONTO North America Users Conference. Cutler is also the founder of the Manufacturing Media Consortium, a group of 2000 journalists writing about various aspects of manufacturing and industrial trends.

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976.

From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the distribution sector ERP leader.

Tom Verzi
PRONTO ERP
952-942-5858
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 02:37 AM | Comments (0)

Concrete Washout Systems, Inc. Signs Exclusive Agreement with the Nations Largest Waste Container Manufacturer

Wastequip will begin manufacturing and marketing Concrete Washout Systems containers.

Elk Grove, CA (PRWEB via PR Web Direct) April 14, 2005 - Concrete Washout Systems, Inc., (CWS) announced today that Wastequip Manufacturing, the nations largest solid and liquid waste container manufacturer, has signed an exclusive agreement and will begin manufacturing and marketing the patent pending concrete washout systems containers.

Wastequip, Inc. is headquartered in Cleveland, Ohio. Since its founding in 1989, Wastequip has become one of the largest manufacturers, designers, and marketers of equipment to collect, process, and transport solid and liquid waste materials. The company's products include a variety of metal containers used for the collection of waste materials, balers, compactors, roll-off hoists, and vehicle mounted vacuum units. For more information visit http://www.wastequip.com .

"We welcome the opportunity to work with Concrete Washout Systems, Inc. in providing the building trades and concrete industries with a quality, cost-effective, and environmentally compliant alternative to their concrete washout needs," stated Bob Rasmussen, president and chief executive officer of Wastequip.

"We are very pleased to have Wastequip as an exclusive manufacturing and marketing partner with the market share they represent. With our other exclusive manufacturer for the west coast, we have aligned ourselves with the two largest container manufacturers in the United States," stated Mark Jenkins, President of Concrete Washout Systems, Inc. "Wastequip is at the forefront of their industry because they maintain a strong commitment and personal interest with their clients and they seek out new technologies, such as ours, that impact their client's business and ultimately their client's bottom line. We believe with their assistance and our aggressive expansion plans, we will have operations in most if not every state within a relatively short period of time," added Mr. Jenkins.

The patent pending CWS is a portable, self-contained and watertight bin that controls, captures and contains concrete washout material and wastewater. It allows trade personnel to easily washout concrete trucks, pumps and equipment on site and facilitates easy off site recycling of the same concrete materials and wastewater, while protecting the storm drain system from potential illegal discharges. The off-site recycling component creates an even more environmentally sound application. This system replaces other outdated washout BMP's, which are costly, unsightly and damaging to the environment since their containment value diminishes, due to inherently faulty material, over use and lack of maintenance.

About Concrete Washout Systems, Inc.
Concrete Washout Systems is a risk management specialist and industry pioneer in concrete washout and wastewater removal, treatment and recycling. The patent-pending Concrete Washout Systems provides a cost effective, environmentally friendly and compliance alternative for homebuilders, contractors, ready mix and pump operators and environmental engineering firms. For more information visit http://www.concretewashout.com

Contact:
Roger Engelsgaard
Concrete Washout Systems, Inc.
1-877-2-WASHOUT
Fax: (916) 689-0592
e-mail protected from spam bots
www.concretewashout.com

Posted by Industrial-Manufacturing at 02:36 AM | Comments (0)

April 14, 2005

Worlds Largest Recycling Trend - Anglers Fishing the Environmental Way

For over 112 years bottlers have been using billions of metal bottle caps every year to bottle their product. Where do you thing all these metal bottle caps go? Parks, rivers, streams, lakes, nature trails and of course landfill sites.

(PRWEB) April 14, 2005 -- Canadian Norm Price has started not only the worlds largest clean up trend, but also the world's largest fishing trend. Norm Price from Sherbrooke, Quebec, Canada, has opened two companies. Hooked On Recycling which has students, clubs, bars, Scouts, pubs, restaurants, schools and communities from all over the North America catching on. They are collecting as many beer and soda caps as they can. Some of them are passed on to The Original Bottle Cap Lure Company. The Original Bottle Cap Lure Company hires students to manufacture The Bottle Cap into fishing lures. Budweiser, Coors, Labatt, Molson, Coca-Cola and many other brands. Some beverage companies have laid claims on the discarded bottle caps., wanting to take legal action against Mr. Price. “Your claiming these bottle caps are yours?” asked Mr. Price. “Then will you be responsible for the clean up of all the caps that have been discarded.”

Mr. Price told them that indeed they are not totally responsible, for the bottle cap is charged four times before landing in the landfill sites. Distributors, Wholesalers, Retailers, and ending with the consumer. Mr. Price has asked the breweries to sponsor a fishing contest by using these recycled Bottle Cap Lures. Brand against brand. They still would not take the bait. While looking for other sponsors, Mr. Price has put together The Battle of the Brands, which is free for the public. Have a look at the website http://www.bottlecaplure.com

The Bottle Cap Lure Company is gaining traction just before Mother's Day & Father's Day. It makes a unique gift made with a recycled product.

The Hot New Lures are also featured in the April Issue of Field & Stream Fishing Magazine. It has also was front page of the Milwaukee Journal

The Original Bottle Cap Lure is also used by 3 Time Canadian Sport Fishing Champion Andy Vander Ploeg. He has won 3 years in a row with the use of the Bottle Cap Lure.

The Bottle Cap Lures can also be custom printed with any company's logo on them.

Hooked On Recycling...Hooked On America...Hooked On News...Hooked On Canada

http://hookedonrecycling.com

Posted by Industrial-Manufacturing at 04:28 AM | Comments (0)

Waste Management Company has New Owner with an Attitude

Cash Flow Equipment, a leading waste management and trash compactor equipment distributor, has a new owner with an attitude against businesses paying more than they should for garbage removal.

(PRWEB) April 14, 2005 -- With 10 years in the waste management industry, Cash Flow Equipment, a leading waste management and trash compactor equipment distributor, introduced their new owner at Salute of Bellevue last week during an industry function.

Cash Flow Equipment specializes in analyzing existing waste removal expenses for apartment buildings, office buildings and any business that produces an inordinate amount of garbage. After running a waste analysis on your business.

Cash Flow Equipment can determine immediately if a trash compactor will benefit the business. Waste Management is becoming more on the forefront as rates constantly increase and businesses are looking for efficient and cost-effective methods to maximize cash flow and increase property values.

“Why wait to budget for a capital item like this one to save you cash. Every month that passes and you don’t have a trash compactor, you are spending extra money you will never see again,” said Jeremiah Roberson, new President of Cash Flow Equipment. “It amazes me how often investors and property managers believe garbage expenses are a fixed expense like all other utility expenses. This could not be further from the truth”.

Jeremiah Roberson has 11 years of experience being an asset manager, managing real estate investments throughout the Puget Sound. After realizing how much value and cash flow these machines added to the bottom line, he decided to purchase the company and utilize his network of other real estate professionals in the industry.

About Cash Flow Equipment: Cash Flow Equipment, a leading waste management and equipment distributor, is dedicated to providing high quality waste management and material handling equipment with exceptional customer service. They are located in Bellevue, Washington.

Posted by Industrial-Manufacturing at 04:27 AM | Comments (0)

Are you providing for your product design teams success?

Do you believe that since your design team has all the tools they need and you have formal program management in place they have what they need to be successful? Designers are dreamers and creators by nature and that must be fostered. They key to getting the most from your team is funneling the creativity into specific deliverables to meet your business needs. Design tools will not provide this focus and program management is far too removed from the design details. You must create processes within design for managing the details of design execution to augment what your formal design tools provide.

Chandler, AZ April 11, 2005 – You want your design team to be a creative, allowing innovative new products to fill you product portfolio. You also want then to execute to the plan to bring these innovative products to market per the plan. The mix of a highly creative nature rolled in with skills to execute to plan does not come naturally to a team. What tends to happen is we assume that tools and program management cover the execution details while allowing the creative nature of the team to flow. This assumption is rarely valid. You must explicitly stimulate the team’s execution skills.

Design tools will not manage all of design processes and program management does not offer the depth into the design details to be affective in the particulars. You must manage the design from within, concentrating on the details of interactions and deliverables between designers and the design team’s external customers such as test, product and marketing functions. The processes to manage the design execution are your “tools” and they must be developed within the design team. Examples of these process tools would include travelers, checklists, engineering specification content, team meetings, specification change management, best practices, lessons learned, review procedures and specification closure procedures.

The key in development of these tools for managing your design process is that it is joint effort between the design team, test, product engineering and program management. Everyone on the product development team has needs and the entire team must reach consensus on who is doing what and the specific deliverables of each step. Consensus first followed up by the necessary documentation “tools” to confirm the plan. Ferret out any issues, get them on the table, address them and build up your tools to remove them as a continuing issue. Do not assume that the formal design tools are managing all the details of your entire design process.

About Jorvig Consulting, Inc.
Jorvig Consulting provides services to enhance product design team processes. Their main goal is allowing the team freedom from surprises during execution. http://www.jorvigconsulting.com

Contact Information:
Jeff Jorvig at 480-895-0478, e-mail protected from spam bots

Posted by Industrial-Manufacturing at 04:26 AM | Comments (0)

Localization World Scheduled May 31 – June 2, 2005, in Bonn, Germany

Localization World — a conference devoted to localization — will be held on May 31 – June 2, 2005, in Bonn, Germany. The three-day event consists of one day of preconference workshops and two days of conference sessions, exhibitions and networking.

(PRWEB) April 14, 2005 -- What does the EU expansion mean for your company and products? How can you market to different cultures and languages?

As business people seek new markets for their products and members of the public sector strive to serve multiple publics, it becomes critical to properly adapt products and services to specific languages and foreign cultures. The process of adapting a product, service or software to a language or culture so that it seems native is called localization.

Companies that want to know more about localization — and how to do it right — will have the opportunity to learn at Localization World, May 31 – June 2, 2005, in Bonn, Germany. The three-day event consists of one day of preconference workshops and roundtables, and two days of conference sessions, exhibitions and networking.

“Experts from around the world will help attendees learn about management and technical issues,” says Donna Parrish, publisher of the magazine MultiLingual Computing & Technology and one of the organizers of Localization World.

“Since the European Union was enlarged from 15 to 25 countries,” Parrish said, “the number of official languages increased from 11 to 20 which will affect many businesses and institutions. “We’ve designed this conference to appeal to localization professionals and managers, both on the customer side and service side to help them deal with these challenges.”

The theme of the conference is "Double the Language Challenge," with three concurrent tracks and presentations by professionals in the world of global business and technology. Localization World Bonn 2005 will have a special emphasis on marketing communications (marcom), the public sector and the European Union. Sessions and roundtables will also address translation automation, the needs of the automotive industry, medical device manufacturing and software publishing.

On June 1, top executives from Bowne, Microsoft, SDL, SAP and Oracle will lead a keynote panel discussion on the new challenges in Europe. On June 2, author David Arnold will make a keynote presentation on “Global Power Brands.”

Localization is a vital function around the world. Representatives from 35 countries attended the last event in Bonn. Localization World Bonn is produced by MultiLingual Computing, Inc., and The Localization Institute in cooperation with The Globalization and Localization Association (GALA).

Advance registration discounts are available through April 15. More information about the event can be found at http://www.localizationworld.com

Posted by Industrial-Manufacturing at 04:26 AM | Comments (0)

ETO ERP Leader Encompix Select Conveyers, Elevators and Process Solution Firms

ETO ERP Leader Encompix Select Conveyers, Elevators and Process Solution Firms

(PRWEB) April 14, 2005 -- ENERFAB is a leading process solution firm with design/build capabilities serving the process industries including chemical, food and beverage, mining, pharmaceutical, power generation, and pulp and paper.

After a three-month implementation, ENERFAB went live with Encompix on October 19, 2004. Moving from a "green screen" system to Encompix was a big change for the Sharonville, Ohio, firm. "We were very impressed with the inventory and purchasing functionality and by eliminating duplicate data entry we have cut our purchasing time by half," said Dave Lutz, IT Director.

ENERFAB has over 2,600 employees in 10 locations and plans to increase its use of Encompix. "We are looking at expanding our use of Encompix into other areas of the business and are planning to bring on our Spare Parts Division in a couple of months."

Minnesota Elevator, Inc. (MEI), Mankato, Minnesota, specializes in the manufacture, installation, modernization, and servicing of various types of elevators. Every elevator produced by MEI is individually engineered. Past work has included round and baseball-diamond-shaped passenger car platforms, 40,000 lbs. capacity freight cars, and 60,000 lbs. capacity truck lifts. MEI went live with Encompix on November 1, 2004.

Located in Rochester, New York, Cross Bros. specializes in providing both standard and custom conveyors, product pick and place assemblies, justification devices, and other material-handling equipment. Cross Bros. completed their Encompix implementation on July 1, 2004.

Thomas R. Cutler, spokesperson for the ETO Institute (www.etoinstitute.org) said, “The ETO Institute recognizes Encompix as the clear cut leader in the Engineer-to-Order environment. The ability to track the rework is so central to the ETO process that it is a central quality issue.”

Encompix (www.encompix.com) has filled the manufacturing software requirements of Engineer-to-Order companies since 1992. The company name reflects our commitment to developing business application solutions that encompass the complex areas of project-based and job-based manufacturing.

Encompix provides ETO manufacturers with a competitive advantage by improving bottom line results.

Contact:
Roger Meloy
Encompix
513-733-0066
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 04:25 AM | Comments (0)

500 to Unlimited: The New E-Z-MRP Business Model

500 to Unlimited: The new E-Z-MRP Business Model

(PRWEB) April 14, 2005 -- E-Z-MRP, the leading manufacturing software system for small manufacturers, announced effective April 15th, there will be a new pricing and product structure. According to Rocky Smolin, founder of Beach Access Software, makers of E-Z-MRP, “We see a distinction between those small manufacturers with less than five hundred parts in material resource planning, and those with a need for unlimited part numbers.”

Smolin noted that some manufacturers will start with the under 500 parts version of E-Z-MRP, priced at $2995, and grow into the new unlimited version, priced at $9800. Beach Access Software credits the $2995 for customers who later choose to upgrade. Other small manufacturers who presently have more than five hundred part will start right away with the E-Z-MRP Unlimited version.

Small manufacturers with more than one hundred parts can no longer manage the manufacturing process on an Excel spreadsheet. Since more than 84% of all manufacturers have less than fifty employees, there is a remarkable opportunity for cost-effective manufacturing systems like E-Z-MRP. Despite the extensive media coverage regarding ERP (Enterprise Resource Planning), in most cases these small manufacturers do not require all the functionality offered, nor can many afford the price point.

Somewhere between Excel and ERP is the core process for most manufacturers. By offering the two versions of E-Z-MRP, no small manufacturer will be required to purchase more software than actually needed, while still having the ability to grow into the E-Z-MRP Unlimited version.

The EZ MRP package includes a full-featured Bill of Materials processor, plus a material planning and tracking module which tracks all sales orders, forecasts, work orders (planned, firm, and released), purchase orders, shortages, raw materials and finished goods inventories. It also records a complete audit trail on all inventory transactions. Also included is a physical inventory function and a purchase order module for printing purchase orders.

E-Z-MRP runs on any Windows-based PC or network, and requires only Access 2000, Access XP, or Access 2003 to run. No on-site or remote training is required. A comprehensive user manual with tutorials provides all the required instruction.

Leasing options are also available.

For more information visit the company’s web site: http://www.e-z-mrp.com, or call 858-259-4334.

Posted by Industrial-Manufacturing at 04:24 AM | Comments (0)

Canadian VAR OTI Partners With PRONTO ERP

Canadian VAR OTI Partners with PRONTO ERP

(PRWEB) April 14, 2005 -- OTI, Optimization Technology Inc., located in Mississauga Canada, has been developing and implementing ERP (Enterprise Resource Planning) systems since 1984. The Canadian VARs (Value Added Reseller) customer base appreciates the features built into their legacy systems which focused on individual manufacturing and distribution requirements. With the advent of GUI (Graphical User Interface) it became too difficult to add some of the new productivity features OTI and their clients wanted.

According to Dave Airey, VP of Sales and Marketing at OTI, “We started looking for a way to move our application to a GUI “look and feel,” but after two years of investigation it became obvious that it was not a practical goal. As an alternative we investigated upgrading our legacy application to a new product.”

OTI’s requirements for a new system revolved around their customers. After many years of custom changes, the legacy system was geared to client requirements.

Airey noted, “OTI’s initial search took us to the major ERP players, but none had the features we required to support our loyal customers.”

Finding an ERP System with Strong Functionality:
The search for a new ERP system ended when OTI was introduced to PRONTO North America (www.PRONTOerp.com). According to Airey, “We were introduced to Pronto and were immediately impressed with the rich functionality. One important feature was that Pronto is fully integrated. We had engineered our legacy system to be fully integrated so this was of major importance.”

The Rationale for PRONTO ERP:
-Fully integrated
-User definable options to tune the systems functionality
-A support system to back up our customers
-Functionality
-GUI look and feel built using a 4 GL tool
-Equipment rentals and tracking
-Service maintenance
-Both Manufacturing and Distribution in one package
-Email & Fax capability
-Multiple SQL platforms including MS SQL

Additional integrated features OTI customers’ are now showing interest include:
-CRM (Customer Relationship Management)
-Advanced Warehousing
-Scan Pack
-Plant Maintenance

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the distribution sector ERP leader.

Contact Information:
Dave Airey
OTI (Optimization Technology, Inc.)
e-mail protected from spam bots

Tom Verzi
PRONTO ERP
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 04:23 AM | Comments (0)

Peggy Smedley and TR Cutler to Address PRONTO North America Users Conference

Peggy Smedley and TR Cutler to Address PRONTO North America Users Conference

(PRWEB) April 14, 2005 -- Peggy Smedley is the editor of Start Magazine and will be addressing the first annual PRONTO North America Users Conference on Thursday, May 5th. Smedley was recently profiled in the Wall Street Journal and authored Mending Manufacturing, How America Can Manufacture its Survival. She is an award-winning journalist.

Wednesday, May 4th, Thomas R. Cutler, CEO of TR Cutler, Inc., author of the Manufacturers Public Relations and Media Guide, Associate Editor of Industrial Connection, and Contributing Editor to InMFG magazine will be addressing the PRONTO North America Users Conference. Cutler is also the founder of the Manufacturing Media Consortium, a group of 2000 journalists writing about various aspects of manufacturing and industrial trends.

PRONTO North America, (www.prontoerp.com) based in Eden Prairie, Minnesota, is the North American Master Distributor of PRONTO-Xi, a comprehensive software system allowing manufacturers, distributors, and retailers to effectively manage all phases of the supply chain. Far beyond just another Enterprise Resource Planning (ERP) System, PRONTO-Xi’s financial and distribution applications are unique and have provided maximum return on investment for a wide variety of organizations since 1976. From PRONTO Planning to PRONTO Production; from PRONTO Forecasting Management to PRONTO Distribution Requirements Planning (DRP); from PRONTO Advanced Warehousing to PRONTO Quality Management System (QMS), the cross-section and breadth of integrated elements addressed by PRONTO-Xi is unmatched in the marketplace and justifies the company’s natural leadership role as the best fully integrated business software solution for more than a quarter century. PRONTO North America is quickly emerging as the distribution sector ERP leader.

Tom Verzi
PRONTO ERP
952-942-5858
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 04:23 AM | Comments (0)

ibg Introduces New Generation of NDT Crack and Structure Test Instruments

A new standard for eddy current testing of automotive components for surface cracks and structure (correct heat treat, case depth, alloy) is being introduced by ibg NDT Systems Corporation. Named eddyvisor ® , the new eddy current instrument line is aimed at both production and laboratory applications, especially for automotive-related components.

Farmington Hills, MI (PRWEB) April 14, 2005 -- A new standard for eddy current testing of automotive components for surface cracks and structure (correct heat treat, case depth, alloy) is being introduced by ibg NDT Systems Corporation. Named eddyvisor ® , the new eddy current instrument line is aimed at both production and laboratory applications, especially for automotive-related components. The outstanding features of these new instruments involve a capability for complete test result documentation, easy operation, testing speed and reliability—all common qualities of ibg instruments and turnkey test systems.

Two models of the eddyvisor ® will be available. A switch panel version, called the eddyvisor ® HMI (for Human Machine Interface), is an user-friendly unit that may be installed near the operator for instant visibility during automated production.

The eddyvisor ® MS (Measuring unit, Structure test) actual test instrument may be located distant from the readout mechanism. The two are linked by cable, with the eddyvisor ® MS installed in the switch cabinet or near the test coils. The latter is equipped with up to 32 channels for testing.

A desktop version, called the eddyvisor ® DS (D=Desktop, S= Structure testing) is more suited to a variety of tasks in a laboratory to audit testing, or for small-to-medium-volume production testing. This instrument is equipped with up to 16 test channels.

Converting the eddyvisor ® DS from one test of a part type to another takes only seconds when tolerance fields have been stored.

These new test instruments provide test times in milliseconds and they include USB ports and an Ethernet port. Likely applications include using four test coils in Quattrosorters configuration tested up to 13,000 parts per hour; testing camshaft journals at up to 32 locations; and monitoring hardening processes at several zones on drive shafts.

Posted by Industrial-Manufacturing at 04:22 AM | Comments (0)

Pet Stairz Manufacture of Pet Stairs and Pet Steps are Reaching New Heights with Their Appearance on NBC Today Show Dated 3/23/05 and the CBS Early Morning Show 4/12/05.

Pet Stairz is the manufacture of pet stairs and pet steps line available in 4 sizes from $99-$139.

(PRWEB) April 14, 2005 -- Pet Stairz pet safety products will help your pets to new heights. The stylish Stairz enable your pets to navigate furniture, beds, vehicles and pleasurecraft with ease. By taking the Stairz you will help to prevent back and neck injuries that can occur when pets jump to and from high places. Pet stairs and pet steps also help to reduce stress on their bones which helps to increase joint longevity giveing pet owners peace of mind.

Available in four sizes for $99 - $139 MSRP, Stairz are lightweight, portable, can be utilized by small and medium sized breeds and are beneficial to all size pets with joint problems, hip dysplasia and arthritis.

The high-density polyurethane foam is flexible and portable. Each step is individually fabricated and bonded which helps to achieve a higher level of support when subjected to pet weight distribution.

Pet Stairz are shipped in beige shearling fabric. Designer covers are sold separately. Check our website http://www.petstairz.com/ for our selection of additional interchangeable, machine washable covers.

Posted by Industrial-Manufacturing at 04:21 AM | Comments (0)

'Value-Based Pricing' A Key Topic at Dubai Plast Pro 2005

Upcoming Dubai Plast Pro 2005, from 25-27 April, will host a range of presentations on the business and marketing outlook for plastics in the Middle East, Africa and Asia. Zurich-based Maack Business Services has organized the eighth congress with industry leaders from Europe, the Middle East, Africa, and Central Asia delivering concurrent sessions.

(PRWEB) April 14, 2005 -- Dr. Hanna Saad, Executive Vice President of Saudi-based Napco Group, will present ‘Value-Based Pricing of Flexible Packaging’ on Wednesday, 27 April at 11:45 am. Key discussion points will include an overview of pricing strategy, the value chain, buying decisions, and the perverse effects of price wars and online reverse auctions on flexible packaging pr