Industrial Manufacturing News: October 2008 Archives

December 2008
Sun	Mon	Tue	Wed	Thu	Fri	Sat
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30	31

« September 2008 | Main | December 2008 »

October 17, 2008

HaydonKerk Motion Solutions Introduces Custom Lead Screws for Transportation Applications

HaydonKerk Motion Solutions, the manufacturer of the world's broadest range of precision linear motion products, has introduced its Kerk custom lead screw for a variety of transportation applications. Available in both standard and custom configurations, the Kerk lead screw and nut actuation has been adopted for use in numerous mass transit vehicles, such as subways, trains, and trolleys. The Kerk Lead Screw assembly requires no routine maintenance and offers a high degree of accuracy and dependability.

HaydonKerk Motion Solutions, one of the world's premier manufacturers of non-ball Lead Screws, is offering its custom Kerk® Lead Screw and nut for Automatic Door actuation used in Transportation applications. The product, available in both standard and custom configurations, was adapted for use in a variety of Transportation-related applications, including mass transit vehicles, such as subways, trains, and trolleys.

The Kerk® Lead Screw assembly requires no routine maintenance and offers a high degree of accuracy and dependability. Economically priced, the assembly is designed for extremely long life: it has been customer tested to more than 1 million cycles.

The screw and nut combination includes a precision-rolled, stainless steel Lead Screw and a custom-formulated, high-strength, self-lubricating Kerkite® polymer nut. The Lead Screw, available in lengths up to 12 feet, is offered in both right- and left-hand thread in a variety of leads (including back driving leads), up to three inches per revolution.

-- Kerkite® polymers outperform other plastics and outlast metal bushings and bearings

In a typical Transportation application, the doors are opened and closed by the motor-driven screws. In some instances, (i.e., a set of subway doors where the two door halves meet in the middle) each door leaf has its own motor and Kerk® Lead Screw to open and close. The Automatic Doors utilize software and motor synchronization to achieve simultaneous movement. In other cases, a single Kerk® Lead Screw can be used where both doors ride on their respective half of the screw. The Lead Screw is RH on one side and LH on the other, so that turning a single motor in one direction allows the two Automatic Doors to move in opposite directions.

-- Lead accuracies are available to .0001 in./in. with optional individual screw mapping

The Kerk® Lead Screw is currently in use in Transportation-related applications in North America, Europe, and Asia.

About HaydonKerk Motion Solutions:
HaydonKerk Motion Solutions is the joining of two world class companies in the field of linear motion; Haydon Switch & Instrument, Inc., and Kerk Motion Products, Inc. Together, the company now offers the world's broadest range of precision linear motion products. Recognized worldwide as a premier manufacturer of stepper motor based linear actuators, rotary motors, lead screw assemblies, and linear rail and guide systems used in niche market applications, HaydonKerk Motion Solutions offers unmatched performance with its range of reliable, precise designs. HaydonKerk Motion Solutions has developed an industry-renowned brand built upon its technical innovation, versatility, customization, product durability, and dedicated customer service.

For more information, please visit our website at http://www.HaydonKerk.com.

Posted by Industrial-Manufacturing at 09:25 PM | Comments (0)

EXAIR Introduces New E-Vac Vacuum Generator

EXAIR’s new E-Vac™ is a series of low cost, compressed air powered venturi vacuum generators for “pick and place”, clamping, lifting, chucking, and surface mounting applications.

(Vocus/PRWEB ) October 17, 2008 -- EXAIR's new E-Vac venturi vacuum generator has been engineered for high efficiency to minimize air consumption and increase cycle speeds. EXAIR’s in-line, single stage design provides consistent, steady vacuum without the fluctuations commonly experienced with mechanical vacuums. Each unit is compact so it can be mounted close to the work surface for fast attach and release times when used with vacuum cups. E-Vac is maintenance free and has no moving parts to wear out.

E-Vac is available in two styles. Low vacuum units up to 21"Hg (71kPa) generate more airflow to overcome porosity and leakage when used with porous materials such as cardboard. High vacuum units up to 27"Hg (91kPa) are ideal for non-porous materials such as glass, steel sheet, and plastic. Kit configurations that include vacuum cups, fittings, tubing and a mounting clip are available.

Posted by Industrial-Manufacturing at 09:25 PM | Comments (0)

Unifin Offers ForZair™ Mobile Transformer Oil Coolers

Standardized designs for quick delivery and low cost.

London, Ontario (PRWEB) October 17, 2008 -- Unifin, (www.unifin.com) a world-leading supplier of Cooling Equipment and Transformer Oil pumps and valves to the Power Generation and Power Transformer industries, offers ForZair™ Mobile Transformer Oil Coolers. The ForZair™ line of high quality Mobile Coolers is available in standard sizes and configurable designs to simplify the purchasing process and ensure quick delivery of your Cooling Equipment.

ForZair™ Mobile Coolers feature Unifin's unique Mono-Aluminum Extruded Fin-Tubes and the industry's best plate fin technology, both of which provide optimal heat transfer efficiency and exceptional durability. ForZair™ Mobile Coolers are designed to work with Cardinal Transformer Oil pumps, which utilize a glandless design to prevent leaks in demanding Transformer Oil applications.

• The Cardinal Transformer Oil pumps are available in both centrifugal and axial flow designs and are designed to perform in extreme temperatures, with extra long life and very low maintenance for the most efficient Cooling Equipment.

ForZair™ Mobile Coolers are available with a performance range of 125 KW-750 KW, for oil flows of 200 usg/m-650 usgpm and a top oil rise (TOR) of 35ºC - 63ºC.
The intelligent design and configurability of ForZair™ Mobile Coolers facilitates efficient manufacturing, resulting in faster delivery and lower costs. Ordering is easy, as designs are chosen at time of quote from detailed selections that take only minutes to prepare. Cooling Equipment products, including our Mobile Coolers, can even be ordered by model number.

• Options for ForZair™ Mobile Coolers include surface treatment, and galvanized finish is standard. A two-part epoxy paint option is available on the Mobile Coolers for chemically-aggressive environments (2 part epoxy) and a durable three-part system is available for marine environments (coastal duty).
For more information about Unifin's superior performance ForZair™ Mobile Coolers for the most efficient Cooling Equipment for all overheating transformer applications in the power generation and power transformer industries, and to see additional Unifin Cooling Equipment, please visit http://www.unifin.com/prodA10.asp?m=cascadeList,A .

About Unifin
Unifin International, "The Hottest Name in Cooling," has been an innovative designer and manufacturer of heat transfer products for many years. Now a world-leading supplier of Transformer Oil coolers and pumps to the power generation and power transformer industries, the company has also emerged as a premier supplier of Large Power Generator, TEWAC Motor and power transformer Cooling Equipment. Headquartered in London, Ontario, Unifin is a part of Koch Industries, one of the largest privately held companies in the world. For more information on Unifin International and its complete line of cooling products, visit www.unifin.com or call 1-888-451-0310.

Posted by Industrial-Manufacturing at 09:25 PM | Comments (0)

USTRANSCOM Announcement

Deputy Commander Rondeau and MG Gould to Deliver Key Initiative Updates at Defense Logistics Conference in December

New York, NY (PRWEB) October 17, 2008 -- Vice Admiral Ann. E. Rondeau, Deputy Commander and Major General Michael Gould, Director of Plans and Operations, USTRANSCOM will both deliver key initiative updates at Defense Logistics, taking place December 2-5, 2008 at the Marriott Crystal Gateway in Arlington, VA.

"The U.S. Transportation Command is the key contributor of logistics innovation for the DoD," said Jarrett Spagnoli, executive director of Defense Logistics. "Major General Michael Gould will discuss the USTRANSCOM Fusion Center and its efforts on end-to-end coordination and synchronization."

Along with the USTRANSCOM updates, key announcements from Paul Brinkley, Deputy Undersecretary of Defense for Business Transformation, U.S. Department of Defense as well as Major General Arthur B. Morrill III, USAF, Vice Director, Defense Logistics Agency are expected. Other announcements from The Joint Staff, The Office of the Secretary of Defense, The U.S. Army, U.S. Navy, U.S. Air Force, Marine Corps Logistics Command are anticipated.

Defense Logistics is an annual cross-service logistics conference which attracts over 500 DoD and contractor logisticians. Established in 2001, the focus of the conference remains synchronization of the supply chain across all DoD agencies and services to better serve and support the warfighter.

Defense Logistics 2008 is supported by IBM, Agility, Apptricity, BAE Systems, Boeing, Click Commerce, Combinenet, Eggs Overnight, Hitachi Consulting, Honeywell, KBR, Lockheed Martin, New Breed Logistics, PRTM, SRA International and others.

Contacts:

Jarrett Spagnoli
jspagnoli@wbresearch.com
646-200-7463

Amol Tembe
atembe@wbresearch.com
646-200-7442

Defense Logistics
www.defenselog.com

Posted by Industrial-Manufacturing at 09:25 PM | Comments (0)

LED Medical Diagnostics Names Dr. Ralph Green President and CEO

The parent of LED Dental, manufacturer of the VELscope Oral Cancer Screening System, has named dental industry veteran Dr. Ralph Green President and CEO.

White Rock, British Columbia (PRWEB) October 17, 2008 -- LED Medical Diagnostics Inc. today announced that Ralph Green, D.D.S., has been named President and CEO.

The company also made two other announcements:

* Founder Peter Whitehead is re-assuming the position of Chairman of the company's Board of Directors. He replaces Steven Semmelmayer, who remains a Director.
* Rick Pauls has joined the company's Board of Directors. Mr. Pauls is Managing Director at CentreStone Ventures in Winnipeg, Manitoba.

LED Medical Diagnostics is the parent of LED Dental, manufacturer of the VELscope Oral Cancer Screening System. The VELscope system, recently named one of 2008's Top 100 Products by Dentistry Today, is the only device on the market that is indicated for use by the FDA to help dental practitioners discover cancerous and precancerous lesions that may not be apparent to the naked eye.

"This is an exciting time in the young history of our company," said Mr. Whitehead. "While we are proud of what we have been able to achieve in only a few years, we have determined that achieving our full potential will require the vision and leadership of someone who has successfully run both start-up and established companies in the dental industry. We are very fortunate to have found that person in Ralph Green, who brings a rare blend of both managerial and clinical expertise."

"As a clinician, there is no doubt in my mind that VELscope's tissue fluorescence visualization technology offers dental practices their best opportunity for discovering early stage oral cancer and even precancer," said Dr. Green. "And as a businessman, I am impressed with the fact that VELscope exam revenues can pay back the device's purchase cost within months and generate significant profits for the practice for years to come. My number one priority is to make certain that we get the word out so that dentists fully appreciate the VELscope's ability to enhance the health both of their patients and of their bottom line."

Dr. Green has held a number of key positions in the dental industry, amassing considerable corporate, entrepreneurial, academic, clinical and volunteer experience in the process. He was the founder of Nobel USA, which is now the largest dental implant company in the world. Dr. Green later founded a dental implant company that he sold in 18 months to a publicly-traded company. He subsequently served as President of the Zila Pharmaceuticals division of Zila, Inc. His other corporate positions have included President of Ralph Green DDS PC, and Vice President of Clinical Affairs for Reachout Healthcare America, which provides healthcare services to underserved communities in twenty-one states and to the brave men and women serving in our country's armed forces. Dr. Green began his career in private dental practice, later serving as a faculty member of Tufts University Dental School and the Forsyth School of Dental Hygiene. He has served as the President-elect of the Dental Manufacturers of America and on the Board of Oral Health America, and is a founder of the Arizona School for Oral Health and a trustee of the Forsyth Institute. He is also a member of the American Dental Association, the American Association for Dental Research and the International Association for Dental Research. He has conducted extensive research in the areas of bone growth, implants, tissue engineering and oncology, is the holder of numerous patents, and is considered an expert in stewarding dental devices through the FDA registration process. He received his Doctorate in Dental Surgery from the University of Iowa and his MBA from Boston University.

Posted by Industrial-Manufacturing at 09:25 PM | Comments (0)

Cranes Provide On-Site Service for Giant Draglines to Ensure Heavy Lifting is not Interrupted

North Queensland Cranes (NQC), Street Crane Company's Australian partner, uses UK built hoists and components extensively. They have found a niche in supplying cranes and hoists to the draglines used by the opencast coal industry. These draglines are among the largest land based machines on the planet and work relentlessly to remove rock and earth overburden to expose coal seams.

Stockport, UK (PRWEB) October 17, 2008 -- North Queensland Cranes (NQC), Street Crane Company's Australian partner, uses UK built hoists and components extensively. They have found a niche in supplying cranes and hoists to the draglines used by the opencast coal industry. These draglines are among the largest land based machines on the planet and work relentlessly to remove rock and earth overburden to expose coal seams.

A typical dragline will have a boom of 50 to 90 metres, will hoist a bucket of up to 90 tonnes and will typically move 55 cubic metres of rock in a single operation. Individual machines can weigh up to 13,000 tonnes. They are too heavy to be supported on caterpillar tracks, so they use a system of movable pontoons to 'walk'. No fuel driven engine can meet their power needs and so they are driven by electric motors via cables directly from Australia's national power grid.

With such a huge capital investment, and the unremitting worldwide demand for coal, these machines operate round the clock. Costly downtime must be avoided, despite the punishing work load. Moving machines off site for servicing is completely impractical, so timely on-site maintenance is essential. Ben Dennis, the senior dragline improvement engineer with BMA Goonyella Riverside commented, "The cranes on BMA draglines play a major role in maintenance and breakdown services. They perform a whole variety of tasks and without this critical equipment, 24/7 operation of the draglines would be impossible."

To meet servicing requirements, NQC have installed cranes inside the machines. Gantry rails were installed in the draglines as they were built. These rails project beyond the dragline perimeter to allow components to be lifted into the dragline from a truck outside. NQC fabricated the crane beams and undertook all the associated mechanical and electrical work. Two draglines have been fitted with cranes incorporating Street Crane's ZX hoists of 30 and 25 tonnes safe working loads respectively. Each crane also has an auxiliary hoist of 10 tonnes to give greater flexibility and for the rotation of key components during final positioning.

The ZX hoist is particularly suited to this environment. In addition to its robust design, the twin scrolling open-barrel layout ensures a vertical lift and placement so that components are not damaged by lateral pulling and can be located precisely. The open design of the hoist means all components are easily accessible for servicing and also promotes air circulation to prevent overheating in this severe climate.

The cranes give access to the whole of the working area. This contains the motors that lift and lower the beam and that power bucket hauling and tilt. There are also motors that rotate the machine and power the pontoons to enable the dragline to walk.

Preventative maintenance is the order of the day. Using the cranes, engineers can pre-position components while the crane is still working so that swap-out is rapidly achieved during the servicing pause and draglines can return to work quickly.

More information
Gus Zona
Tel. +44 (0)1298 812456
Fax. +44 (0)1298 814 945
E-Mail: admin @ streetcrane.co.uk
Web: www.streetcrane.co.uk
Street Crane Company, Chapel-en-le-Frith, High Peak, SK23 0PH, UK

High/low resolution images are on the web at www.ainsmag.co.uk/st165/4583st1a.htm

Posted by Industrial-Manufacturing at 09:21 PM | Comments (0)

Thomas Skid Steer Loaders Appoints John Andrews as Regional Business Manager, Western Europe

Thomas Equipment named John Andrews as Regional Business Manager, Western Europe, to expand its Thomas Skid Steer Loaders business. Andrews has over two decades of heavy equipment industry experience in Europe and North America.

Centreville, Canada (PRWEB) October 17, 2008 -- Thomas Equipment Inc., a global manufacturer and marketer of Thomas Skid Steer Loaders, appointed John Andrews as Regional Business Manager, Western Europe, announced Gilbert Bedard, Vice President of Global Sales.

Andrews, with over two decades of heavy equipment industry experience for firms such as Caterpillar and others in North America and Europe, will be based in the U.K.

Petter Etholm, President and Chief Executive Officer, said, "Thomas welcomes John to the Thomas team and looks forward to benefiting from his expertise as we build our Thomas Skid Steer Loader brand and business in Western Europe."

Bedard said, "John brings a wealth of knowledge and experience to Thomas and will play a key role in furthering our strategic initiatives in the Europe."

Andrews will report to Mary Jane Clark, Director of European and Australian Operations, who said, "As we expand Thomas' business in existing markets and open new areas of growth in Europe, we are confident John will make a vital contribution to our progress."

Before joining Thomas, Andrews was a consultant for European companies. Prior to that, at Dana Commercial Credit and First Fleet Corp. he was responsible for business development and sales of equipment fleet management and leasing programs for Fortune 500 clients. He was also Business Development Manager of West Coast Services, Canada, for sales of construction, crane, ship loaders and other equipment. He began his career in the U.K. as a sales representative of Hall Thermotank International, focused on the European shipping industry.

Andrews said, "I am proud to be part of such a dynamic company and feel that Western Europe holds tremendous growth opportunity for ruggedly dependable Thomas Skid Steer Loaders."

Andrews was born in England, served in the Royal Navy and holds a Bachelor of Arts degree in Economics.

Thomas Equipment, online at www.thomas-equipment.com, is a unit of Osiris Corporation (OSRS), www.osiriscorp.net, which provides a variety of branded and other products to industrial markets through subsidiaries including: Thomas Equipment Inc.; Thomas Equipment Asia Co. Ltd.; Thomas Ventures, Inc., Pneutech-Rousseau, Inc. and TcomT Inc. Osiris' units manufacture and market industrial and construction equipment, distribute pneumatic and hydraulic systems and design wireless devices for the telecommunications industry, among other activities.

Safe Harbor Statement
Under the Private Securities Litigation Act of 1995 - This press release discusses forward-looking statements with risks and uncertainties. OSRS results could differ materially due to various factors, including inability to finance operations or expansion and hire or retain personnel, economy and interest rate changes, and events such as terrorism. OSRS believes statements to be reasonable, but neither OSRS nor any other person can represent they will be achieved. OSRS is not obligated to update statements due to new information, events or otherwise. Please see the risk factors associated with our Company and review our SEC filings.

Posted by Industrial-Manufacturing at 09:21 PM | Comments (0)

New Bri-Mar Line of Dump Inserts Expands Pick-up Truck Versatility

Bri-Mar Manufacturing designs and builds pick-up truck dump inserts to convert pickup truck beds into "dump trucks" making the insert a versatile add on capable of moving mulch, stone, brush or other materials to and from a given location.

Chambersburg, PA (PRWEB) October 16, 2008 -- Bri-Mar has done it again. Through innovative technology and adaptation of their field-proven dump trailer, come the DI-100 and DI-100-6 Dump Inserts. Available now for both 8' and 6' beds, these inserts aid in the removal and transport of mulch, stone, dirt and debris. The dump insert fits easily and securely in the back of any pick-up truck, quickly converting it into a cost-effective dump truck.

Much like the dump trailer, the dump insert uses a heavy-duty hydraulic scissors lift, powered by a Monarch electric/hydraulic system with a 20' remote. Save precious time and energy that are better spent elsewhere. This line of products eliminates the need for manual material removal, preventing extra work, injuries and possible damage to the bed of the truck.

The insert comes in both 64" x 101¾" (DI-100) and 64" x 76" (DI-100-6) sizes and offers a rated lift capacity of 6,000 pounds. Due to its smaller, more compact size, the DI-100-6 holds a volume of 1.5 cubic yards while the DI-100 transports up to 2 cubic yards. A Bri-Mar dump insert becomes an invaluable tool for any landscaper, renovation contractor, roofing & siding contractor or homeowner with a pick-up truck.

To resist the elements, Bri-Mar designed and built the dump inserts with 12-gauge steel floor and 14-gauge sides and they are acid etched and then finished in a black Valspar powder-coated paint for professional appearance and long-term durability. To increase carrying capacity, four stake pockets run the length of each side, allowing easy insertion of posts and construction of higher walls to increase capacity for lighter materials. Each model comes with a standard one-piece tailgate, complete with chains.

Options for both models include a full-height cab protector to ensure visibility and the integrity of rear-window glass; a tarp kit, and a convenient wireless remote. As with all reliable Bri-Mar products, a two-year warranty is standard.

Since 1995, Bri-Mar Manufacturing has been providing high quality products at an affordable price point. They continue to design value and durability into their diverse product lines: Hydraulic Dump Trailers, Equipment and Car Haulers, Tilt Trailers and now the new Dump Inserts. Bri-Mar is one of the leading manufacturers of hydraulic dump trailers in North America.

For more information or to find a Bri-Mar dealer near you, please call 1-717-263-6116 or visit Bri-Mar Pick-up Truck Dump Trailers.

Posted by Industrial-Manufacturing at 09:21 PM | Comments (0)

iRespond Announces New Products

iRespond Mini-Tablet, iRespond-Now! and "Capture" technology top list.

Milton, FL (PRWEB) October 16, 2008 -- iRespond has introduced three new products to its line of student response systems, the iRespond Mini-Tablet, iRespond-Now! and "capture" technology for its Touch remotes.

"The iRespond Mini-Tablet allows the teacher to walk around the classroom and have complete control of his or her PC," says Bill Thompson, president of Wireless eSystems, manufacturer of iRespond.

"We saw an increased desire on the part of teachers to have tablet technology but many said they could not afford it," he says. "We're offering this for less than half the cost of other wireless tablets.

"iRespond-Now! is another exciting product. It is included free with our Teacher's Dashboard software version 6.0," says Thompson. "This feature allows teachers to use iRespond with any content or software program. With iRespond-Now! a teacher may perform summative assessments no matter what program or content he or she wishes to use. It makes iRespond even more versatile and valuable to teachers."

Another major addition is to the iRespond-Touch system software. iRespond has included "capture" technology that essentially turns iRespond-Touch remotes into student writing-tablets. The iRespond-Touch system can now capture whatever a student writes on his/her touch panel remote. Students may then send what they have written directly to the teacher for grading.

"This is exactly what math and science teachers have been asking for," says Thompson. "It's also great for foreign language, geography, and spelling tests, to name a few uses. Not only is the iRespond-Touch still the only graphics capable student response system on the market, but coupled with the student writing capability it is guaranteed that there is nothing else like it."

Other major improvements in the 6.0 software release include a second option for using PowerPoint with iRespond. Teachers may create new question slides or convert existing questions slides without leaving PowerPoint. Also in this release is a new MS Word importer. Now you can easily convert tests created in MS Word or .rtf files to the iRespond format with just a click of a button.

iRespond offers teachers three hardware choices: the iRespond-UltraLite; iRespond-Lite; and iRespond-Touch remotes; and a Web-based tool, iRespond AnyPlace. All four options use the newly upgraded Teacher's Dashboard software. iRespond is both Mac and PC compatible.

For more information visit: http://www.irespond.com

Posted by Industrial-Manufacturing at 09:21 PM | Comments (0)

Freescale Named No. 1 in Auto MCUs; Set to Showcase Technology Leadership in Detroit

Concept Car Exhibit, Hands-On Demonstrations and Freescale News Announcements Planned for Convergence 2008

AUSTIN, Texas (Business Wire EON/PRWEB ) October 16, 2008 -- Freescale Semiconductor, the world’s leading automotive semiconductor supplier, rolls into Detroit next week for Convergence 2008, the world’s premier automotive electronics conference. On the heels of being named the No. 1 supplier of automotive microcontrollers (MCUs) by Strategy Analytics, Freescale will showcase its leading-edge technology for “green” engine design, high-end infotainment, and safety and telematics at the biennial event, which will be held at the Detroit Cobo Center, Oct. 20-23.

The recent Strategy Analytics report, ”Automotive Microcontrollers: Market Demand and Product Directions,” forecasts that 32-bit devices will account for 58 percent of the $7.6 billion automotive MCU market by 2015. The report adds that high-end MCUs will be the key enablers of future emissions-controlling powertrain technology, advanced safety and driver assistance systems, and multimedia entertainment products. During Convergence 2008, Freescale will demonstrate its technology innovation and leadership in these key areas with its concept car exhibit, which showcases virtually all of Freescale’s technology in action.

”Freescale’s continued momentum in the automotive MCU market is built on our commitment to excellence in quality and technology innovation, and our strong relationships with leading automakers in the United States, Europe and Asia,” said Ray Cornyn, director of automotive microcontrollers at Freescale. ”This year at Convergence, we’re showcasing many of Freescale’s latest silicon solutions and development tools designed to drive the next generation in automotive safety, infotainment and green engine design.”

News and demo highlights

Freescale’s demonstrations and exhibits at Booth #719 support the overall theme of Convergence 2008: “Vehicle Electronics Converging on Real Customer Needs.”

Concept car

* The highlight of Freescale's booth will be a concept car that demonstrates the latest innovations in body electronics, safety systems, powertrain management, telematics and infotainment. Demo highlights include a body controller with the local interconnect network (LIN) protocol controlling the lighting and HVAC systems, a 3D navigation system, a roll-over prevention system and more.

Powertrain designs

* Freescale will debut the world’s most powerful automotive microcontroller for “green” engine design. The 32-bit MCU is designed to deliver 10 times the performance of today’s typical engine controllers while reducing system cost by nearly 30 percent. In addition, Freescale will demonstrate comprehensive solutions that include advanced embedded controllers, sensor technology, power management components and power actuator drivers for gasoline engine management.

Automotive safety

* Freescale will demonstrate low-g inertial sensors for electronic stability control and chassis solutions for electrical power-assist steering. Freescale also will unveil how Power Architecture® MCUs and FlexRay™ technology are used to enhance vehicle safety, comfort and agility for BMW’s X6 sports activity coupe.

Comfort and convenience

* Freescale will announce its latest high-performance i.MX applications processor for high-end automotive infotainment, designed to help drive down the cost of developing hands-free control of in-vehicle entertainment and navigation technology. Freescale and G4 Apps also will demonstrate a jointly developed, production-ready automotive platform for safety and telematics applications, featuring an industry-proven module for dedicated short-range communications (DSRC).

Enablement solutions

* Freescale will introduce the V-Architect tool suite designed to help leading automakers manage the increasing complexity of automotive electronics design and streamline system integration. Freescale also will demonstrate a RAppID solution that enables developers to quickly configure Freescale automotive MCUs and get up and running fast. Another demonstration will highlight the award-winning CodeWarrior® Development Studio, which provides a visual framework for automating the development of complex automotive applications.

Freescale: The leader in automotive semiconductors

Freescale is the world’s No. 1 supplier of automotive semiconductors, with more than 30 years of experience in the automotive industry. Freescale’s sensors, analog products and 8-, 16- and 32-bit microcontroller and processor families provide intelligence and connectivity for advanced safety, body electronics, chassis, engine control, powertrain, infotainment and telematics. Freescale is a pioneer in FlexRay™ technology and was the first supplier to integrate CAN, LIN and flash memory technologies on automotive MCUs. www.freescale.com/automotive

About Freescale Semiconductor

Freescale Semiconductor is a global leader in the design and manufacture of embedded semiconductors for the automotive, consumer, industrial, networking and wireless markets. The privately held company is based in Austin, Texas, and has design, research and development, manufacturing or sales operations in more than 30 countries. Freescale is one of the world's largest semiconductor companies with 2007 sales of $5.7 billion (USD). www.freescale.com

RSS Feeds:

* Freescale Press Release RSS Feed
* Freescale Recent Developments RSS Feed

Freescale and the Freescale logo are trademarks or registered trademarks of Freescale Semiconductor, Inc. in the U.S. and other countries. All other product or service names are the property of their respective owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org. © Freescale Semiconductor, Inc. 2008.

Posted by Industrial-Manufacturing at 09:21 PM | Comments (0)

Ohio Coatings Company Earns 2008 Summit Award at Consona Customer Conference

Company Uses AXIS® ERP to Reduce Shipping and Labor Costs; Win Transformation Award

Las Vegas, NV, Indianapolis, IN and Yorkville, OH (Vocus/PRWEB ) October 16, 2008 -- Consona Corporation (Consona), a worldwide leader in providing customer relationship management (CRM) and enterprise resource planning (ERP) software and services for companies of all sizes, today announced at its premier customer conference, Consona Connect, that Ohio Coatings Company, a Yorkville, Ohio-based leader in tin-plated products and AXIS ERP user, is the 2008 recipient of the software provider's Transformation Award.

The Transformation Award, part of Consona's annual Summit Awards, honors a customer that has been able to either reinvent its business or achieve a strong return on investment in a relatively short period of time. Recipients of the award submit both qualitative and quantitative data that illustrate how the solution has impacted the customer's business model or overall business performance. Award recipients display significant business improvements and changes, such as unprecedented customer satisfaction levels, the introduction of new products and services, or increased sales.

Ohio Coatings Company was established in 1995 as a joint venture company of Wheeling-Pittsburgh Steel Corporation and Dongyang Tinplate of South Korea. As a startup in 1996, Ohio Coatings Company searched for the best-fit ERP solution that could be implemented within a reasonable timeframe and at a reasonable cost. Additionally, the company needed the solution to be customizable and easily integrated into its production environment and business practices. Ohio Coatings Company selected AXIS to meet these challenges.

The AXIS solution's value was realized through the company's many customization, integration and e-commerce efforts. The largest customization effort involved integrating AXIS ERP with the Best Transport® network, a Web-based application service provider with over 4,000 shippers and carriers. In the past, Ohio Coatings Company's truck dispatcher used the ERP system's truck schedule report to call preferred contracted carriers and schedule carrier equipment and pickup times for each load. It was a time-consuming, error-prone process that often involved multiple phone calls and a number of paper-based checks and balances. After customizing AXIS ERP to integrate with the Best Transport network, the entire process was largely automated, freeing up 50 percent of the dispatchers' time.

After implementing AXIS in 1996, Ohio Coatings Company realized the following returns:

* Reduced shipping costs by 10 percent.
* Saved 60 hours of labor per week by automating the process of tendering loads and approving invoices.
* Implemented EDI with other suppliers, eliminating manual effort involved in processing paper invoices.

"Consona's AXIS team demonstrates a thorough understanding of the metals business," said Peter Marshall, manager of information services at Ohio Coatings Company. "I have advised others that they won't find a better fit in a metals industry off-the-shelf ERP solution than AXIS ERP."

"We are thrilled to honor Ohio Coatings Company with a Summit Award for some absolutely tremendous achievements," said Jeff Tognoni, CEO of Consona. "Ohio Coatings Company sets a standard for the commitment it takes to gain maximum return on a business system investment. The growth and success this company has achieved with our support reminds all of us at Consona why we're in business."

About Consona Corporation
Consona Corporation (Consona, formerly known as M2M Holdings Inc.) is a worldwide leader in providing customer relationship management (CRM) and enterprise resource planning (ERP) software and services for the enterprise. Consona is dedicated to becoming a valued business partner by helping each and every customer continuously improve business processes over time. Toward this mission, Consona invests in the people, processes, technology and tools needed to provide its customers with a unique combination of customer care; product fit; a broad range of consulting, IT and business services; and industry expertise. Consona serves more than 4,500 customers worldwide and across a variety of industries, including manufacturing, distribution, financial services, health care, high tech, and local government. Battery Ventures and Thoma Cressey Bravo jointly own Consona. For further information, visit www.consona.com, e-mail info@consona.com, or call (888) 8 CONSONA.

Contact:
Mitch Briggs
Consona Corporation
Direct: (317) 249-1620
Mobile: (317) 829-4210
Mitch.briggs@consona.com

Valerie Harding
Ripple Effect Communications
Direct: +1 (617) 536-8887
vharding@recommunication.com

Posted by Industrial-Manufacturing at 09:17 PM | Comments (0)

Parallel Petroleum Chooses Triple Point’s Solution for Fair Value Disclosure

10th energy company to select Triple Point’s comprehensive software to ensure consistency in fair value level assignments and mark-to-market disclosure under FAS 157 standard

WESTPORT, Conn. (Business Wire EON/PRWEB ) October 16, 2008 -- Triple Point Technology®, the leading global provider of multi-market commodity and enterprise risk management software solutions, announced today that Parallel Petroleum Corporation (NASDAQ:PLLL), an independent oil and gas company with proved reserves of 43.8 MMBOE, has selected Triple Point’s Commodity XL for Fair Value Disclosure™ to provide credit-adjusted mark-to-market (MTM) and fair value level assignment for its energy commodity derivative transactions.

Parallel joins the impressive ranks of Copano Energy, Plains Exploration & Production Company (NYSE:PXP), Dominion Resources and Range Resources in its recent selection of Triple Point’s comprehensive module for FAS 157 and IFRS 7 compliance. The software solution provides the tools and framework to define, measure and manage fair value levels and meet all disclosure requirements.

Headquartered in Midland, Texas, Parallel is engaged in the acquisition, development, exploration and production of oil and gas using 3-D seismic technology and advanced drilling, completion and recovery techniques. Parallel's primary areas of operation are the Permian Basin of West Texas and New Mexico, North Texas Barnett Shale, Onshore Gulf Coast of South Texas, East Texas, Utah and Colorado.

Parallel uses financial collars and swaps to hedge price movements in natural gas and crude oil. Triple Point’s fair value disclosure software provides the company with the tools and systems to ensure consistency and comparability of fair value measurements and the disclosure of credit-adjusted mark-to-market assumptions and valuations for both assets and liabilities by counterparty. Additionally, Commodity XL for Fair Value Disclosure provides Level 3 roll-forward activity and schedules and enables Parallel to track position by counterparty and perform sensitivity analysis.

“To a large extent, the financial crisis continues to be perpetuated by the simple loss of confidence,” said Elie Zabal, Triple Point’s senior vice president of treasury management and regulatory compliance solutions. “Triple Point’s FAS 157 solution ensures the consistency and auditability of fair value level assignments and the business transparency that stakeholders demand to confidently do business in today’s volatile environment.”

Triple Point’s Commodity XL for Fair Value Disclosure is based on mature, well-tested software solutions obtained in its acquisition of INSSINC. INSSINC, now the treasury management and regulatory compliance division of Triple Point, serves premiere energy and commodity industry leaders throughout North America and Europe including such notable companies as: PacificCorp, TransAlta, TransCanada, SUEZ Energy, Southern Company, Ameren Energy, Scottish Power and Campbell Soup Company.

About Triple Point Technology

Triple Point Technology® is the leading global provider of multi-market commodity and enterprise risk management software solutions. Triple Point’s Commodity XL™ profitably integrates physical and financial markets on a real-time, service-oriented architecture (SOA) platform for commodities including power, oil, gas, coal, base and precious metals, agricultural products, biofuels and freight. In addition to Triple Point's award-winning commodity and energy trading software being used by more than 25 percent of both Global 500 commodity trading and Global 500 energy companies, other organizations with large raw material and energy exposure, including consumer packaged goods (CPG), discrete manufacturers and big box retailers, are quickly adopting the Triple Point solution. Named to the Deloitte Technology Fast 50 for ten straight years, Triple Point added to its record-breaking organic growth in 2008 with the acquisitions of INSSINC, the leading provider of hedge accounting and fair value level software and ROME Corporation, the industry leader in credit risk software solutions. Triple Point, headquartered in Westport, Connecticut, USA, was founded in 1993 and serves clients from nine development and support centers located around the globe. More information is available at www.tpt.com.

Posted by Industrial-Manufacturing at 09:17 PM | Comments (0)

E-ONE A Major Fire Apparatus Manufacturer To Use ECK ® Coating To Prevent Dissimilar Metal Corrosion On All New Fire Truck Builds

E-One a leading manufacturer of emergency apparatus headquartered in Ocala Florida has implemented the use of the patented ECK ® corrosion coating. ECK ® (Electrolysis, Corrosion, Kontrol) developed by the Van Nay Corporation, was invented and patented to prevent dissimilar metal corrosion of any dissimilar metals.

South Elgin, IL (PRWEB) October 16, 2008 - E-One a leading manufacturer of emergency apparatus headquartered in Ocala Florida has implemented the use of the patented ECK ® corrosion coating. ECK ® (Electrolysis, Corrosion, Kontrol) developed by the Van Nay Corporation, was invented and patented to prevent dissimilar metal corrosion of any dissimilar metals

"ECK ® is used by most of the world class emergency apparatus manufacturers to prevent the natural corrosive reaction when stainless steel hardware is used to assemble aluminum", said Richard Nay Sr. Van Nay's President.

E-One along with their paint coatings supplier tested the ECK ® coating using industry standard salt spray ASTM-B-117 laboratory methods. "We were delighted with the results showing that the ECK ® coating prevented the dissimilar metal corrosion reaction using stainless steel hinges along with our aluminum compartment doors", said Rick Reed, E-One's Paint Shop Superintendent.

Mike Tomasetti, Director of Engineering said "We are committed to providing our customers with the best fire apparatus units in the industry. Preventing electrolysis and galvanic corrosion with the ECK ® coating will be a value added benefit for our customers".

ECK ® is both sold direct by the Van Nay Corporation and is also distributed by Austin Hardware, Powerbrace Corporation in the US and POMAR Hardware in Canada.

Technical data and other helpful information can be found at http://www.vannay.com

Contact:
Richard Nay Sr., President
Van Nay, LLC.
(847) 931-7899

Posted by Industrial-Manufacturing at 09:16 PM | Comments (0)

Timelapsevideos.net Introduces EZHD High Definition Time-Lapse Video System

New Time-Lapse Video System makes it easy for anyone to create professional-quality HD time-lapse videos with minimal effort and without costly hardware investment.

Denver, CO (PRWEB) October 16, 2008 -- Timelapsevideos.net today announced the EZHD High Definition Time-Lapse Video System. This turnkey system makes it possible for anyone to create high-impact 1080p HD time-lapse videos.

Time-lapse photography has historically involved huge amounts of time, effort and luck. The EZHD System takes away the uncertainty and makes it easy to create compelling footage for applications ranging from entertainment to marketing.

The EZHD High Definition Time-Lapse Video System starts with the innovative EZHD camera, which is available for rent on a weekly basis. Users plug the camera into power and position the it using a preview web page. While the camera is in use, Timelapsevideos.net manages and monitors the system via a cellular link to ensure that the desired footage is being captured.

Proprietary EZHD post-processing smoothes luminance and motion between frames, resulting in professional-quality video. Movies are encoded as .264 .mp4 files and are also available on Blu-ray Disc.

The EZHD camera features professional quality optics, specialized onboard computer and high-capacity storage drive. The camera captures high definition images on a customized schedule, and has the ability to automatically upload select images for online viewing.
Options include a variety of lenses, making the EZHD System suitable for a wide range of conditions.

For additional information about the EZHD High Definition Time-Lapse Video System, visit http://www.timelapsevideos.net.

About Timelapsevideos.net:
Timelapsevideos.net provides simple solutions for creating custom time-lapse videos. Their customers include television and entertainment companies, retailers and manufacturers, and independent video production companies.

Posted by Industrial-Manufacturing at 09:16 PM | Comments (0)

QlikView's DIY Business Intelligence Helps Cultivate Profitability

Inside Info, provider of QlikView business intelligence software, have added Toro Australia to the company's growing client list. Toro Australia has rolled out QlikView to over 40 operational, sales and management staff with its first application delivered in just six days. The speed and ease of deployment, competitive pricing with better long-term total cost of ownership and the availability of a robust and proven SAP connector, were decisive factors in Toro's choice of QlikView over other BI platforms.

Sydney, NSW, Australia (PRWEB) October 15, 2008 -- Do-It-Yourself and simplified business intelligence is in strong demand according to Inside Info, provider of QlikView business intelligence software, with Toro Australia joining the company's growing client list.

Part of The Toro Company (NYSE: TTC), a leading worldwide provider of outdoor maintenance and beautification products for home, recreation and commercial landscapes, Toro Australia has rolled out QlikView to over 40 operational, sales and management staff with its first application delivered in just six days. With just two days of developer training, Toro has consolidated data from SAP BW, as well as its service centre, freight and CRM management systems to deliver an interactive view of customer profitability at a product line, item and material level. All QlikView development is managed in-house by Toro.

Toro's strategic imperative is to 'grow lean' by developing processes and business support systems that ensure company resources are directed at the right level to improve customer and product profitability. This needed to be achieved in an environment where Toro's ERP system and data outputs are managed overseas from head office.

QlikView allows Toro for the first time to freely explore and analyse sales and margin impacts of in excess of 5,000 individual products from every conceivable angle of the business. This includes margin rates per customer, sales per quarter by salesperson, sales per product code by district and salesperson. Toro's operational teams can also better manage freight costs, analysing freight against sales at a customer level.

The speed and ease of deployment, competitive pricing with better long-term total cost of ownership and the availability of a robust and proven SAP connector, were decisive factors in Toro's choice of QlikView over other BI platforms.

QlikView is even used to monitor the resources an individual customer uses in the business and the amount of time a Territory Manager spends face-to-face with a customer compared to the value that customer delivers to ensure an equitable balance.

"We realised value from our QlikView investment within days," said Tim Hogan, Manager, Business Intelligence, Toro Australia. "We put QlikView's ease-of-use to the test ourselves by taking one of our Business Units and extracting five years of data. With only one internal resource and support on hand from Inside Info, we built a powerful profitability analysis application that was back on the desks of business managers in six days. The result was an integrated view of customer profitability at a material level - and it's the first time we've had this."

"Toro is a prime example of how QlikView really does simplify analysis for everyone," said Stuart Barnard, Managing Director at Inside Info. "QlikView is extremely powerful, but still so easy and fast to develop and use because it's based on in-memory analytics rather than OLAP. Enterprise level users can be up and running within days. Consequently, the business is receiving benefits within days and weeks rather than the indefinite period traditionally associated with BI software, now it can also be with minimal consultancy attached."

About Inside Info:
Inside Info is the exclusive distributor and local representative of QlikView in Australia - the world's fastest growing business intelligence software according to IDC. Inside Info specialises in selling, creating and bringing to life QlikView applications that simplifies business analysis for everyone, delivering powerful and interactive dashboards and reporting solutions. Inside Info have over 180 local QlikView customers across mid market and large organisations, including Toro Australia, Vodafone, Manassen Foods, Avnet Technology Solutions and Fujitsu General.

QlikView works the way your mind works - making associations by connecting data from many sources in a few clicks. This patented in-memory association technology brings fast results and better decision making. QlikView is intuitive to learn, simple to modify and can be deployed in a few weeks. QlikView is the flagship product of QlikTech who has more than 415,000 users at more than 9,233 customers in 87 countries. QlikTech was founded in Lund, Sweden and is headquartered in Radnor, PA (USA). QlikView was awarded "Best Mid Market Software Solution" at the Gartner Midsize Enterprise Summit in 2007.

Inside Info offers a fully functional, free trial of QlikView. For more information, please visit http://www.insideinfo.com.au

For media enquiries, please contact
Jo Balfour
Progressiva
jobalfour @ progressiva.com.au
+61 2 9365 6258
+61 405 542 018

Posted by Industrial-Manufacturing at 09:03 PM | Comments (0)

Universal Forest Products Western Division President Pat Webster to Become President and COO

Webster to be Succeeded in West by Former Regional VP Dick Frazier

GRAND RAPIDS, Mich. (Business Wire EON/PRWEB ) October 16, 2008 -- Michael B. Glenn, president and chief executive officer of Universal Forest Products, Inc. (Nasdaq: UFPI) today announced the appointment of Pat Webster, president of Universal Western Division and a 24-year veteran of the Company, as president and chief operating officer of the corporation, effective January 1, 2009. Webster will be succeeded in the West by Dick Frazier, a former regional vice president who has been with Universal for 23 years. The appointments were approved by the Board of Directors at their Oct. 15, 2008 meeting.

Glenn said the appointments come at a critical time, as the company is developing strategies and initiatives for long-term growth and opportunity against the backdrop of a difficult economy. “Universal has many opportunities for success in these turbulent times and beyond, and no one is better qualified to help drive our success and growth than Pat and Dick,” he said. “They’re highly respected by employees, customers and leaders in the industry and, with their knowledge and years of experience, they’ll help us achieve critical short- and long-term goals.”

“This marks a great new era of leadership at Universal,” added Executive Chairman William G. Currie, who will retire as an active employee of the Company in July 2009. “Mike Glenn has created the strongest leadership team in the industry. Putting Pat and Dick in these vital positions is good for the company, its employees, shareholders and stakeholders—and its future.”

Webster began his career at Universal in January 1985, as a trainee at the Company’s Grand Rapids, Mich., headquarters. He then worked in sales in Illinois and, in 1986, became a buyer for the purchasing department of the then-Midwest Company. He was promoted to director of that department and then to vice president of purchasing for Universal’s then-Far West Company.

In 1996, Webster became general manager of operations at the Company’s Woodburn, Ore., plant. A year later, he was promoted to vice president of operations. In 1998, he was promoted to vice president of the Far West Region and, in July 2007, he became president of the Western Division, one of the Company’s two operating divisions. Noting Webster’s breadth of experience, Glenn said: “Pat’s thorough understanding of our business, customers, vendor mills and employees gives him a unique perspective and opportunity to help take Universal into the next decade and beyond. He’s a strong consensus builder and leader, and will be an excellent chief operating officer for our company.”

Webster said he is honored to be trusted with the vast responsibility of the position and looks forward to helping create new opportunities for growth. “Universal’s success and strong reputation have been built by hardworking people who make it a better place day by day,” Webster said. “I look forward to continuing to serve the Company in this new role and to working with the best employees in the industry to grow our success. I’ll work hard to live up to the high standards of the company and its people.”

Frazier joined Universal in 1985 as vice president of the Southwest Region, a position he held until Jan. 1, 2008, when he took on a new position to work on special projects throughout the company, focused on continuous improvement and on assisting underperforming operations. “Dick is the best lumberman in America,” Glenn said. “He was always the strongest performer in our company—and perhaps in its history—and he consistently led his operations to new heights. The man knows how to create profitability.”

“I look forward to the opportunity to work with the strong team in the West to bring its operations through these tough economic times stronger for the battle, and ready for new and significant growth,” Frazier said.

Headquartered in Grand Rapids, Mich., with approximately 85 facilities throughout North America, Universal Forest Products engineers, manufactures and markets wood and wood-alternative products for DIY/retail home centers, structural lumber products for the manufactured housing industry, engineered wood components for the site-built construction market, and specialty wood packaging and components for various industries. The 53-year-old Company also provides framing services for the site-built market and forms for concrete construction. For 2007, the Company reported sales of more than $2.5 billion. For information about Universal Forest Products, visit www.ufpi.com.

Please be aware that: Any statements included in this press release that are not historical facts are forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended. Such forward-looking statements are based on the beliefs of the Company's management as well as on assumptions made by, and information currently available to, the Company at the time such statements were made. The Company does not undertake to update forward-looking statements to reflect facts, circumstances, assumptions or events that occur after the date the forward-looking statements are made. Actual results could differ materially from those included in such forward-looking statements. Investors are cautioned that all forward-looking statements involve risks and uncertainty. Among the factors that could cause actual results to differ materially from forward-looking statements are the following: Adverse lumber market trends, competitive activity, negative economic trends, government regulations and weather. Certain of these risk factors and additional information are included in the Company's reports on Forms 10-K and 10-Q on file with the Securities and Exchange Commission.

Posted by Industrial-Manufacturing at 09:03 PM | Comments (0)

To Better Service its Customers in the Northeast and Eastern Portions of the U.S.A, Mario Cotta America, Inc. Opens New Branch Office in Central New York State

After experiencing positive company growth in 2008, the Vice President/General Manager of Mario Cotta America is spearheading a new company branch in central New York state to service Northeast and East coast customers.

Cincinnati, Ohio (PRWEB) October 16, 2008 -- To better service its customers in the Northeast and Eastern portions of the U.S.A, Mario Cotta America, Inc. opens new branch office in Central New York state.

Established over 80 years ago in Inveruno, Italy, Mario Cotta is an industry leader in the manufacturing of products for the converting and paper mill industries.

As a supplier of products for both end users and OEMs, Mario Cotta is well known for its top quality slitting equipment including knives, knifeholders, rails and brackets, and slitting systems. By providing its customers with a wide range of slitting products, Mario Cotta has been able to continually expand and offer superior products and services.

Mario Cotta joined the Zincometal group in 1991, creating a partnership which would fuel positive growth for both companies. For over 10 years, the Mario Cotta U.S.A. sales office has been located in Cincinnati, Ohio, and has been exceptionally successful in promoting the Mario Cotta brand in the U.S.A. With the addition of a new branch in New York state, Mario Cotta will substantially expand its customer service network.

Interview Contact:
Frank Continelli
Telephone: 800-792-9302
http://www.mario-cotta.com

Mario Cotta America, Inc.
10829, Millington Court
Cincinnati, Ohio 45242
800-792-9302 voice
800-792-9303 fax

Posted by Industrial-Manufacturing at 09:03 PM | Comments (0)

RoadLoK Security Inducted into Motorcycle Industry Council

RoadLoK Security, provider of failsafe security systems for motorcycles, has been voted into the membership of the Motorcycle Industry Council (MIC).

Orange County, NY (PRWEB) October 16, 2008 -- RoadLoK Security, developer of premium motorcycle locking technologies, has been voted into the Motorcycle Industry Council (MIC). RoadLoK Security has successfully engineered and currently licenses its patented motorcycle locking technology to several motorcycle component manufacturers, thus gaining international notoriety within the global motorcycle industry. Gaining acceptance into the MIC validates the company's mission: to produce safer security for bikers worldwide.

The MIC is a not-for-profit, national trade association created to promote and preserve motorcycling and the U.S. motorcycle industry. RoadLoK Security is listed as an Aftermarket Parts Manufacturer and will take part in the MIC's involvement on issues such as state and local legislation bills that affect the industry, retail market data collection and industry technical notices. "By joining the MIC, we can support the very industry that supports us." stated Adam Xavier, Managing Director of RoadLoK Security.

For more information regarding RoadLoK Security visit the company's website: http://roadlok.com

For information regarding the Motorcycle Industry Council please visit: http://www.mic.org

(888)-ROADLOK

Posted by Industrial-Manufacturing at 09:03 PM | Comments (0)

Dorf Ketal Chemicals Adds Prominent Industrial Distributor Dorf Ketal Chemicals Taps Palmer Holland, Inc.

Dorf Ketal Chemicals LLC, a specialty chemical company, announced today it has appointed Palmer Holland, Inc. as one of its top distributors for its Lubricant Additives and Plastic Additives lines. Palmer Holland is an ISO 9001-certified company that provides a comprehensive range of products and services to assist industrial manufacturers.

Houston, TX (PRWEB) October 16, 2008 - Dorf Ketal Chemicals LLC, a specialty chemical company, announced today it has appointed Palmer Holland, Inc. as one of its top distributors for its Lubricant Additives and Plastic Additives lines. Palmer Holland is an ISO 9001-certified company that provides a comprehensive range of products and services to assist industrial manufacturers.

"We are excited about the opportunity to link the Dorf Ketal product line, market and technical capabilities with the strong professional sales and distribution capabilities of Palmer Holland," said Bill Loven, president, Dorf Ketal Chemicals North America. "This reinforces our mission to bring increased value to our customers and is an excellent complement to our established specialty product line for our target market segments."

Under the arrangement, Palmer Holland is responsible for sales of Clearlink and Unilink products in the coatings market, as well as the PX Lubricant Additives for the industrial and metalworking lubricant formulators. Palmer Holland will cover the company's United States distribution in the Midwest, Atlantic Coast and Northeast regions.

"Not only have we strengthened our well-known partnership with Dorf Ketal, but we have also further strengthened our position as a leading distributor in both the general and specialty chemical markets," said Bryn Irvine, CEO, Palmer Holland. "Dorf Ketal's products are highly specialized and require a skilled technical sales force. We are pleased to broaden the scope of our product portfolio with these lines of products."

About Dorf Ketal Chemicals LLC
Dorf Ketal, headquartered in Mumbai, India, develops, tests and manufactures specialty chemicals for the petrochemical, adhesive, paint and coating industries. With few exceptions, most products are produced in the company's state-of-the-art plant in Mumbai, India and sold through six major sales offices across the globe for guaranteed delivery at competitive rates.

Dorf Ketal produces specialty chemicals for independent lube oil manufacturers and a wide range of performance-engineered products for use in refineries and petrochemical treatment processes. Dorf Ketal is the exclusive marketer of component additives once manufactured by ExxonMobil Chemical, STAR refinery products, Phlox fuel additives and UOP refinery and additives for plastics.

Palmer Holland Inc.
Established in 1925 and headquartered in North Olmsted, OH, Palmer Holland Inc.is an ISO 9001-2000 certified specialty chemical distributor dedicated to helping businesses succeed in many of today's industrial sectors. Markets served include paint and coatings, adhesives and sealants, rubber, plastics, graphic arts, civil engineering, composites and metalworking and lubricants additives.

Product categories include resins, pigments, functional additives, extenders and fillers and metalworking and lubricant additives.
Palmer Holland's sales and distribution footprint extends from the Eastern seaboard to the Mississippi River corridor, and from the Canadian border to the geographical areas of Memphis, TN and St. Louis, MO.

Contact: Amanda Abbott
Amanda(at)anthonybarnum.com
512-329-2767

Posted by Industrial-Manufacturing at 09:03 PM | Comments (0)

Doopoco Enterprises Fine Cabinetry Announces a New Web Site and Sustains Extraordinary Growth Through 2007

Doopoco Enterprises is proud to announce a new web site at www.doopoco.com. The new site features a visually stunning design showcasing some of their most recent work while continuing to provide valuable information to those interested in having custom cabinetry made. In 2007 Doopoco Enterprises experienced 74% growth over 41% growth in 2006 and was acknowledged as the 11th fastest growing wood products company in North America.

Thousand Oaks, CA (PRWEB) October 16, 2008 -- This past summer Doopoco Enterprises retained the services of Sunni Chapman at Bella Fiore Art & Design to recreate and update www.doopoco.com. The changes reflect Doopoco's continuing commitment to providing high quality cabinetry and service to their clients. The new site showcases some of Doopoco's most recent work with beautiful high resolution images and informative descriptions of each project.

Jim Doolittle, Owner of Doopoco Enterprises, says, "There is a wealth of information on our new site to educate and inform our clients to help make the process of having custom cabinetry made for their home be an enjoyable journey."

Sunni Chapman can be reached through www.bellafiorei.com or at 530-320-2936.

Doopoco Enterprises has received the Wood 100 Award from the publishers of Wood and Wood Products Magazine for the second consecutive year for being the 11th fastest growing wood products company in North America for 2007. The award acknowledges companies with consistent and productive growth.

While continuing to serve their local clientele, Doopoco expanded their operation to serve the communities of Palm Desert and Palm Springs California. Doopoco completed two large custom home projects designed by architect Kristi Hanson. Some of this cabinetry can be viewed at www.doopoco.com.

Doopoco Enterprises received coverage in Wood & Wood Products Magazine's September 2008 issue for being # 11 on the magazine's Wood 100 list of the fastest growing wood products companies in North America for 2007.

About Doopoco Enterprises:

Doopoco Enterprises designs and manufactures high quality custom cabinetry and residential furniture.

Doopoco has the ability to execute a variety of styles with the imagination and design creativity to create cabinetry that is unique for each of their clients.

"We understand the importance of service and attention to your needs through all phases of a project. We make it a priority to keep in touch with you, keep the project on schedule and keep you updated with information pertinent to the project's success. Having custom cabinetry designed and built can be exciting and fun, we know how keep it enjoyable from start to finish." -- Jim Doolittle

Contact: Jim or Jamie Doolittle at 866-514-7776 or 805-983-2701

Posted by Industrial-Manufacturing at 09:03 PM | Comments (0)

October 15, 2008

New Technical Paper Reveals Why Torit® PowerCore® is Smaller & Smarter Than Traditional Baghouses

Donaldson® Torit® has published a new 6-page white paper revealing the technical advantages of smaller and smarter Torit PowerCore dust collectors and PowerCore filter packs with Ultra-Web® technology.

Minneapolis, MN (PRWEB) October 15, 2008 -- Donaldson® Torit® has published a new 6-page white paper revealing the technical advantages of smaller and smarter Torit PowerCore dust collectors and PowerCore filter packs with Ultra-Web® technology. The white paper provides detailed technical information and illustrations that show how Torit PowerCore dust collectors are 50-70% smaller than traditional baghouses while offering better filtration and less maintenance. It also explains how Torit PowerCore solves the problem of dust bridging and provides case studies with manufacturers in grain, cement, wood and plastic who have improved their dust collection and maximized plant floor space like never before.
To download the Torit PowerCore white paper, visit the case studies link at Donaldson.com/ToritPowerCore.

About Donaldson Company, Inc.
Donaldson Torit is the brand name under which Donaldson's industrial filtration products are sold. Donaldson Company, Inc. is a leading worldwide provider of air and liquid filtration systems and replacement parts that improve people's lives, enhance our Customers' equipment performance, and protect our environment. We are a technology-driven company committed to satisfying our Customers' needs for diesel engine equipment and industrial filtration solutions through innovative research and development, superior technology, and global presence. Our 13,000 employees contribute to the company's success by supporting our Customers at more than 100 sales, manufacturing, and distribution locations around the world. Donaldson is a member of the S&P MidCap 400 and Russell 1000 indices, and our shares trade on the NYSE under the symbol DCI. Additional information is available at www.donaldson.com.

Posted by Industrial-Manufacturing at 05:53 AM | Comments (0)

QlikView's DIY Business Intelligence Helps Cultivate Profitability

Inside Info offers a fully functional, free trial of QlikView. For more information, please visit http://www.insideinfo.com.au

For media enquiries, please contact
Jo Balfour
Progressiva
jobalfour @ progressiva.com.au
+61 2 9365 6258
+61 405 542 018

Posted by Industrial-Manufacturing at 05:53 AM | Comments (0)

Innovative Enterprise Inventory, Assets and Tracking Management System Eliminates Customization Cost in Tight Economy

ASAP launches Passport to give IT departments a powerful, easily configurable and customizable asset tracking software - no custom code, no hidden costs

San Jose, CA (PRWEB) October 15, 2008 -- The experience of purchasing enterprise software is full of costs on the back end. Over time, the cost of purchasing a system may be smaller than the cost of updating the software to meet current business needs. Revising and updating software field names alone can cost several hundred thousand dollars over hundreds of fields that may need changing on a regular basis. Suddenly, customization becomes a significant expenditure.

Veteran technology company ASAP Systems today announced the launch of Passport, an asset- management software system designed to eliminate "cost-creep" in this segment. The SQL-based platform bar-code system is a suite of products including Passport Assets, Passport Inventory, Passport Checkout and Passport Suite that manages the entire lifecycle of inventory and assets. This powerful flexible, scalable system is designed specifically as a solution for easing tracking pains for manufacturing inventory tracking and facilities management for industries such as electronics, healthcare, construction and government.

"The number one complaint we hear from potential customers about tracking management systems on the market today is the considerable on-going cost of making changes to the software to mirror changes in their business environment," stated Elie Jean Touma, ASAP Systems' CEO. "We listened to what users, IT managers, manufacturing and facilities managers, CEO's and CFO's said would be their ideal system and developed Passport to meet those requirements. It is a perfect turnkey solution for small-medium sized departments, national organizations, and large global corporations because of its scalability and its ability to integrate with existing accounting, ERP and CRM solutions."

CEO and CFOs have a hierarchy visibility to their data; IT managers have full control over the back end databases, security, and user setting. Key features include user defined field names, reports, labels, and dashboards as well as exports to common formats such as excel, pdf and html. The system works with all standard technologies including SQL Databases, Windows Operating Systems, and Windows Mobile 5 mobile operating systems. Product demos can be viewed at www.asapsystems.com.

About ASAP Systems
ASAP Systems is a veteran provider of next generation inventory and asset tracking software for small-medium size and global companies across a broad range of industries. ASAP System's flagship product, Passport, allows companies of all sizes (small to large enterprises) to manage their inventory, track multiple locations, generate management report, print barcode labels and catalogs, resulting in improved control and performance. It is the industry's only all-in-one system with inventory, asset and check-in/check out tracking capability. Over 1 million inventory items are tracked using ASAP solutions in many industries worldwide to improve the productivity and responsiveness of business operations. ASAP System's serves several hundred clients including Kaiser Permanente, Sony, Cadbury's, and Deloitte. For more information, visit www.asapsystems.com.

For further information, please contact:
ASAP Systems
408-227-2720
sagarwal @ asapsystems.com

Posted by Industrial-Manufacturing at 05:52 AM | Comments (0)

Extended Microsoft Project Server solution boosts product development efficiency at Bosch and Siemens Household Appliances Group

BSH (Bosch and Siemens Household Appliances) has been able to increase project management efficiency in its product development with solutions from TPG The Project Group. These have been implemented as an extension to their existing Microsoft Project Server 2003 installation. TPG MilestoneLink ensures that the department managers' capacity planning is aligned with the project managers' individual project planning. TPG ToolbarCustomizer shortens the ramp-up period for subassembly managers and increases acceptance of Microsoft Project Client by shortening its menus and reducing complexity. TPG MTA Server improves the transparency of how important project milestones are progressing, facilitating enterprise-wide project reporting.

(PRWEB) October 15, 2008 -- BSH (Bosch and Siemens Household Appliances) has been able to increase project management efficiency in its product development with solutions from TPG The Project Group. These have been implemented as an extension to their existing Microsoft Project Server 2003 installation.

TPG MilestoneLink ensures that the department managers' capacity planning is aligned with the project managers' individual project planning. TPG ToolbarCustomizer shortens the ramp-up period for subassembly managers and increases acceptance of Microsoft Project Client by shortening its menus and reducing complexity. TPG MTA Server improves the transparency of how important project milestones are progressing, facilitating enterprise-wide project reporting.

As the European market leader and one of the world's largest manufacturers of household appliances, BSH (Bosch and Siemens Household Appliances Group) has very comprehensive product development capacity. Building a new appliance often involves several different production sites, and each machine may comprise well over 100 subassemblies that have their own project plans. These are interdependent and are consolidated into one overall project with Microsoft Project Server. BSH uses this solution to plan capacity in the various departments and create schedules for each project. It is utilized in the same way for management reporting.

"Our project planning processes have become so complex that we really needed effective support from specialized software tools," says Uwe Tontsch, Department Manager for Information Technology Product Development & Industrial Engineering Solutions. "And this is where TPG MilestoneLink, TPG ToolbarCustomizer and TPG MTA Server significantly streamlined our processes," adds Monika Keller, project manager for the overall Project Server implementation. She continues: "But we shouldn't forget to mention the great collaboration with TPG. We're supported by a competent and reliable partner who has assisted us in embedding project management tools into BSH's business process environment."

TPG MilestoneLink enables companies to set up links in schedules across different projects. Milestones and tasks from other projects are copied into a project manager's own project. The project manager can then decide whether or not to link the deadlines to the tasks in his/her own plan, or to just use them as a reference. If a deadline in a different project is delayed, he/she sees immediately which of the external linked tasks is causing the problem. The time-consuming search for the cause of a delay outside their own project is eliminated.

At BSH, user acceptance of Microsoft Project has been enhanced with the add-in product TPG ToolbarCustomizer. "New staff who need to work with Microsoft Project plans can be trained on this tool much faster now," says Monika Keller. "This is because they only see the menu items they really need for their role in the project planning process. The fact that TPG ToolbarCustomizer makes Microsoft Project less complex boosts acceptance as well as efficiency." As a result, BSH has purchased an enterprise-wide license for the product.

The TPG MTA Server product supports the way project managers in BSH's development department report to financial controlling about their projects. The progress of BSH's enterprise-wide milestones throughout the project lifecycle is displayed as easy-to-read milestone diagrams that can be copied and pasted into web-based reporting documents.

Product pages on the web:
http://www.theprojectgroup.com/E/milestonelink
http://www.theprojectgroup.com/E/toolbarcustomizer
http://www.theprojectgroup.com/E/mtaserver

About BSH Bosch and Siemens Hausgeräte GmbH:
BSH Bosch and Siemens Hausgeräte GmbH is a corporate group operating worldwide, which posts annual sales 2007 in excess of 8.8 billion euros. It stemmed from a joint venture set up in 1967 between Robert Bosch GmbH (Stuttgart) and Siemens AG (Munich). With a workforce of about 40,000, BSH Bosch und Siemens Hausgeräte GmbH is currently the world's third-largest company in the home appliance sector. BSH manufactures its products in 43 factories, and has a presence in more than 40 countries with about 70 companies.

Posted by Industrial-Manufacturing at 05:50 AM | Comments (0)

ECS Nominated for Platts Global Energy Award

Buffalo-based demand response firm is nominated for prestigious energy award.

Buffalo, NY (Vocus/PRWEB ) October 15, 2008 -- Platts announced on September 30 that Energy Curtailment Specialists, Inc. (ECS), the largest privately held demand response provider in North America, has been selected as a finalist for the Rising Star Award, making it ECS' second year in a row to be nominated.

The Rising Star Award is one of sixteen categories recognized in Platts' annual Global Energy Awards. This award looks at companies that have used their skills to establish themselves as equal-to or even more successful than existing players in their field.

"It is an honor for ECS to be recognized two years in a row," said Stephen Lynch, principal and co-founder of ECS. "This just proves that ECS has been at the forefront of demand response and plans to remain there."

Glen Smith and Stephen Lynch started the company as a two man operation which has since evolved into a company employing over 70 employees and is considered a leader in its field. ECS' success not only comes from its dedicated and talented employees, but from a diverse customer base.
ECS' customers consist of large energy users from industrials, hotels, hospitals, schools, and commercial properties. ECS depends on its customers to help the company drive its vision and continue offering outstanding demand response services.

About Energy Curtailment Specialists, Inc.:
ECS offers turnkey, administrative, and a la carte demand response services. Energy Curtailment Specialists is currently serving markets in all of New York, California, New England, Kansas City, PJM territories, and Ontario, Canada. For more information, please call 877-711-5453, or visit us on the web at www.ecsgrid.com

Media Contact:
Tracey Penner
Communications Specialist, ECS
877-711-5453 ext. 233
tpenner @ ecsny.com

Posted by Industrial-Manufacturing at 05:50 AM | Comments (0)

Cognis' QTA® System Helps Westfalia Separator Commission Biodiesel Plants in Record Time

Cognis' QTA ® System business unit is helping Westfalia Separator significantly reduce the start-up time of the biodiesel plants it is building throughout the world. By giving Westfalia Separator the ability to get accurate quality testing results on in process and final product in the less than two minutes, Westfalia's start up teams can produce in-spec B100 within the first day of start-up.

Cincinnati, OH (PRWEB) October 15, 2008 -- Cognis Corporation, through its QTA® System business, recently announced that its biodiesel quality testing system is helping Westfalia Separator, a member of the global GEA Group, reduce the time to test, calibrate and commission the biodiesel plants it is building throughout the world. Westfalia's start-up teams estimate significant time savings as a result of getting accurate data on in process and final product within minutes of taking a sample.

"The fast and accurate testing approach of the QTA System helps us move through the commissioning process with speed and accuracy" said Constantine Triculis, Biodiesel Manager of Westfalia Separator. "Instead of taking hours or more between process adjustments, we are now able to test a sample in two minutes, adjust the appropriate process parameter, retest to see the effect of the process adjustment, re-adjust as needed and so on. The QTA testing system is a key tool we use to quickly produce in-spec B100 within the first day of start-up saving both Westfalia Separator and our clients time and money. The ability to get accurate results so quickly and the fact the analysis can be easily done at any time, by any member of the start-up team, makes the QTA System a part of all future Westfalia process start-ups."

Barbara Stefl, Cognis' Global Business Director, said, "The very same aspects of our testing system that are valued by our biodiesel customers-- quality testing in less than 2 minutes with patented accuracy --are also valued by design/build companies looking to improve the efficiency of their commissioning process. With robust, industry standard calibrations already in place, the QTA system can test biodiesel immediately at start up and throughout the commissioning process. Real time results on in-process samples helps get the process line tuned in and lined out faster, with almost no off-spec product.

Cognis' QTA patented BioDiesel Analysis starts by digitizing the light spectra of the biodiesel sample using proven infrared technology. Those spectra are then sent, via the internet, to Cognis' central database where algorithms converts the spectra, in real-time, into standard quality measurements that are viewed online. All this occurs in less than two minutes.

Cognis' QTA system is offered on a subscription basis and does not require any capital investment. The annual subscription includes an easy-to-use infrared spectrometer, software for a standard PC and unlimited use of Cognis' Chingometric™ centrally-calibrated algorithms that covert the light spectra into actionable information.

About QTA®
QTA® is a service business of Cognis Corporation -a worldwide supplier of innovative specialty chemicals and nutritional ingredients, with a particular focus on the areas of wellness and sustainability. The company employs about 7,700 people, and it operates production sites and service centers in 30 countries. Cognis' QTA® business provides on-site, ready-to-use analytical capabilities without additional investment in equipment or personnel. Patented, centralized calibration technology enhances accuracy. For more information on the QTA® system, visit www.qta.com

Cognis is owned by private equity funds advised by Permira, GS Capital Partners, and SV Life Sciences. In 2006, Cognis recorded sales of 3.37 billion euros and an Adjusted EBITDA (operating result) of 394 million euros.

About Westfalia Separator
Westfalia Separator with more than 110 years of innovation, first class engineering and comprehensive process capabilities is a manufacturer of centrifuges and a technology provider of specialized, centrifuge based, process lines. Westfalia is a part of the GEA Group based in Bochum, Germany. GEA reported 4.3 billion euros in sales and employed some 19,200 people worldwide. For more info visit www.westfalia-separator.com

Posted by Industrial-Manufacturing at 05:50 AM | Comments (0)

ESS and Atrion International Extend Hazardous Substance Reporting and Product Compliance Capabilities Through Partnership

Global EH&S sustainability and product compliance software leaders expand their partner ecosystems to deliver enhanced value to clients

Tempe, Ariz. and Montreal, Quebec (PRWEB) October 15, 2008 -- ESS, the leading provider of Environmental, Health and Safety (EH&S) and Crisis Management software for enterprise sustainability, and Atrion International, a leading provider of product compliance solutions, jointly announced a strategic partnership today. The newly formed partnership will extend both ESS' and Atrion's software offerings in order to address product and REACH compliance goals in a more comprehensive and cost-efficient manner.

"This is a business alignment that is well-positioned to meet the accelerating global business demand for product compliance solutions," said Patrick J. Lavoie, Atrion's President and Chief Executive Officer. "We look forward to a successful partnership that enables companies to streamline product compliance and minimize health and environmental impacts of hazardous chemical substances early in the product lifecycle stage."

"ESS maintains its leadership position in the EH&S software industry because of its ability to leverage strategic partnerships that add value for its customers," said Robert Johnson, ESS President and CEO. "ESS is taking the lead in providing solutions for business sustainability, thanks to its strategic alignments with business partners such as Atrion."

Atrion's partner strategy focuses on establishing strong, long-term relationships with a select number of leading technology, regulatory and consulting organizations that share a deep commitment to customer success. Through various go-to-market strategies, Atrion and its partners assist each other in providing solutions to meet the specific product compliance challenges encountered by companies doing business world-wide.

The ESS global partner ecosystem leverages and extends the strengths of the ESS software platform with other industry leaders and their complementary products and services; ESS' partner agreements have a proven track record of providing enhanced value to ESS solutions and enabling customers to address critical business challenges.

About Atrion
Atrion International Inc. founded in 1989, delivers the most reliable, product compliance solutions for multi-national 'formula-based' companies. By integrating the largest set of managed regulatory content into a pre-packaged automated solution and connecting to key ERP systems, Atrion's Product Compliance Solution ensures that products will reach customers, with minimal risks to brand image and shareholder value. Atrion International is headquartered in Montreal, Quebec, Canada with offices in the United States and Europe. For more information, visit www.atrionintl.com.

About ESS
ESS is the leading provider of Environmental, Health & Safety (EH&S) and Crisis Management sustainability software that supports Governance, Risk and Compliance and operational excellence. The company has provided global and local software solutions for thousands of businesses, government agencies and other organizations worldwide. ESS is headquartered in Tempe, Ariz., with offices in Denver, Houston, Washington, D.C., Beijing Calgary and London. For more information, visit www.ess-home.com.

Atrion Intl. Contact:
Donna Zamiska
Marketing & Communication Manager
(514) 337-2114, ext. 226
dzamiska @ atrionintl.com

PR Contact:
Marlene Kovac
Verrecchia Group Communications
(514) 421-1940
marlene @ vergroup.com

ESS Contact:
Dawn Kehr
(480) 346-5526
ess-media @ ess-home.com

Posted by Industrial-Manufacturing at 05:50 AM | Comments (0)

Goertek Selects Phitek Active Noise Rejection™ Technology for New Noise Cancellation Earphones

Phitek Systems Limited, the global leader in advanced noise cancellation technologies, announced today that its Component-ANR(tm) Active Noise Rejection technology has been adopted by Goertek Inc. for use in a new range of exciting advanced active noise cancelling earphones.

Hong Kong Electronics Fair (PRWEB) October 15, 2008 -- Phitek Systems Limited, the global leader in advanced noise cancellation technologies, announced today that its Component-ANR(tm) Active Noise Rejection technology has been adopted by Goertek Inc. for use in a new range of exciting advanced active noise cancelling earphones.

Phitek Component-ANR™ technology comprises the world's first integrated solution for active noise cancellation providing tomorrow's consumers with an opportunity to enjoy an authentic Premium Personal Audio listening experience free from background noise.

Phitek Component-ANR™ technology comprises a low power, low noise ANR™ solution in a System-In-Package (SiP) format, which connects to a compact and optimized acoustic subsystem. The acoustic subsystem may be implemented in a wide range of physical formats compatible with the end customer's unique design language.

Goertek spokesperson Jack Reynolds said, "We were looking for a technology that could deliver superior noise cancellation in the smallest possible form factor to meet the requirements of the mobile phone and portable audio markets. The Phitek single chip solution achieves this goal and offers Goertek a strong competitive advantage."

Mark Donaldson, Phitek CEO expressed his delight in securing Goertek as a customer. "We are confident that our Phitek Component-ANR™ technology combined with Goertek's world leading capabilities in headphone and earphone ODM will provide both companies with a unique opportunity to further advance the noise cancellation category."

For further information please contact:

Mark Donaldson, CEO Phitek Systems: Mobile: +64 29 291 6550
Nicola Gray, Marketing Communications Manager, Phitek Systems: +64 21 593331
Julien Leys, JML Communications, Ph +64 21 655 598

About Phitek Systems Ltd

Phitek Systems Ltd is the world's leading supplier of audio enhancement and noise rejection technologies. Focused on innovation and invention, Phitek provides its key global customers with creative state of the art analogue and digital signal processing designs for audio enhancement and noise rejection. Phitek manufactures high quality and award-winning premium noise cancellation headphones and ear buds for prestigious global brands. These products have been successfully sold to leading CE brand partners for global distribution. A leader in the commercial aviation market, Phitek proprietary Active Noise Rejection (ANR™) technologies including its remote-jack-unit SmartJack™ ANR™ platform have been installed on the aircraft of major airlines.

The company's headquarters is located in Auckland, New Zealand with operating offices, production facilities, and worldwide sales locations in Hong Kong, San Jose - California, Canada, Yokohama - Japan, and Shenzhen - China.

For more information about Phitek Systems Limited please visit www.phitek.com.

About GoerTek Inc.

GoerTek Inc. is a leading microphone and speaker/receiver supplier headquartered in Weifang, China. Since 2001, the company has started to provide ECM and SMD microphone solutions to leading handset, headset and NB manufacturers worldwide.

Beginning in 2003, the company has developed and delivered turn-key audio products, including Bluetooth headsets, to world-recognized brands in the audio, communication and gaming industries. There are about 4,500 employees worldwide.

For more information about Goertek Inc, please visit www.goertek.com.

Posted by Industrial-Manufacturing at 05:49 AM | Comments (0)

Mettler Toledo Announces the new Titration Compact line for Simple and Secure Karl Fischer Titration, the Successful Titration Excellence line in Version 3.0, and the Next Generation of the powerful LabX Titration PC software.

METTLER TOLEDO is delighted to announce the new Titration Compact line for simple and secure Karl Fischer titration, the successful Titration Excellence line in version 3.0, and the next generation of the powerful LabX titration PC software. Water content gives important information about many products. Karl Fischer titration is the specific standard method for the determination of water content and gives accurate and precise results within minutes. With the new METTLER TOLEDO Karl Fischer titrators, only One ClickTM is required to run a water determination! The intuitive color Touchscreen user interface makes the operation of the instrument very simple. Clever navigation properties, online screens informing about the current titration, and the unique user specific homescreen with shortcut buttons provide ease-of-use and security. The user is familiar with the instrument in a small amount of time.

Columbus, Ohio (PRWEB) October 15, 2008 -- METTLER TOLEDO is delighted to announce the new Titration Compact line for simple and secure Karl Fischer titration, the successful Titration Excellence line in version 3.0, and the next generation of the powerful LabX titration PC software.

Water content gives important information about many products. Karl Fischer titration is the specific standard method for the determination of water content and gives accurate and precise results within minutes. With the new METTLER TOLEDO Karl Fischer titrators, only One ClickTM is required to run a water determination! The intuitive color Touchscreen user interface makes the operation of the instrument very simple. Clever navigation properties, online screens informing about the current titration, and the unique user specific homescreen with shortcut buttons provide ease-of-use and security. The user is familiar with the instrument in a small amount of time.

Our new compact line is comprised of two models for volumetric Karl Fischer titration and two new Karl Fischer Coulometers:

-V20: Everything needed for routine volumetric Karl Fischer titration from 100 ppm up to 100% water.
-V30: All-around volumetric titrator with additional security features, comprehensive application possibilities and automation with the Stromboli oven sample changer.
-C20: Routine Karl Fischer Coulometer for determination from 1 ppm up to 5% water.
-C30: All-around coulometer with additional security features, comprehensive application possibilities and automation with the Stromboli oven sample changer.

The new version 3.0 of the Titration Excellence line adds dedicated Karl Fischer functionality to the general titration models T70 and T90. General titration applications can be combined and run with volumetric Karl Fischer titration on the same instrument - on the T90 even in parallel. The user gets a two-in-one instrument which offers the utmost application power with simplest operation while using minimum bench space.

All titrators of the Excellence and Compact line can be connected to the new generation of the PC software LabX titration. The new version 3.0 offers innovative SmartcodesTM functionality: samples are labeled with a barcode and LabX pro will find the corresponding titration method automatically when the barcode is read with the barcode reader. Efficient operation is combined with advanced security. In addition, all existing features such as full control over the titrator, secure database archiving, networking, efficient result management with control charts, and individual search filters are still included.

METTLER TOLEDO is a leading global manufacturer of precision instruments. The company is the world's largest manufacturer and marketer of weighing instruments for use in laboratory, industrial and food retailing applications, holding top-three market positions in several related analytical instruments and is a leading provider of automated chemistry systems used in drug and chemical compound discovery and development. In addition, the company is the world's largest manufacturer and marketer of metal detection systems used in production and packaging. Additional information about METTLER TOLEDO can be found on the World Wide Web at www.mt.com.

Posted by Industrial-Manufacturing at 05:46 AM | Comments (0)

Thomas Equipment Showcases Thomas Skid Steer Loaders at Annual SAIE Building Expo in Italy

At the annual SAIE Building Expo, Gilbert Bedard, Thomas Equipment V.P. of Global Sales, said rugged Thomas Skid Steer Loaders are easy-to-service and meet the rigorous demands of Europe's construction industry.

Bologna, Italy (PRWEB) October 15, 2008 -- The SAIE 2008 International Building Exposition will showcase a full display of Thomas Skid Steer Loaders at its 44th Annual gathering, announced Gilbert Bedard, Vice President of Global Sales of Thomas Equipment Inc.

Bedard said, "SAIE offers an opportunity for Thomas to demonstrate its scope of product, range of operations and commitment to help our customers succeed."

Petter Etholm, President of Thomas, said, "SAIE presents a dynamic international forum for Thomas to present its ruggedly durable and dependable Thomas Skid Steer Loaders and we expect to further build global awareness of our great Thomas brand."

Mary Jane Clark, Director of European and Australian Operations, said, "The European building industry and markets around the world need easy-to-service Thomas skid steer loaders that perform day-in and day-out."

Thomas Skid Steer Loaders will be displayed at Area 45 Stand D-10 at the international event that draws more than 175,000 visitors primarily from the building and construction industry. The show will be held at the Bologna Exposition Centre, October 15 to 18.

Thomas Equipment is online at www.thomas-equipment.com, where customers can learn more about Thomas Skid Steer Loaders, with their bright yellow cab and Polar Bear Thomas logo that are a sign of excellence on any farm.

Thomas Equipment Inc., based in Centreville, New Brunswick, Canada, is a unit of Osiris Corporation (OSRS), www.osiriscorp.net, which provides a variety of branded and other products to industrial markets through subsidiaries including: Thomas Equipment 2004, Inc.; Thomas Equipment Asia Co. Ltd.; Thomas Ventures, Inc., Pneutech-Rousseau, Inc. and TcomT Inc. Osiris' units manufacture and market industrial and construction equipment, distribute pneumatic and hydraulic systems and design wireless devices for the telecommunications industry, among other activities. For more information about Thomas Equipment, visit the company's website at: www.thomasloaders.com.

Posted by Industrial-Manufacturing at 05:46 AM | Comments (0)

Cbeyond Leverages Count5 Q Companywide

Count5, the inventor of salesforce alignment software, announced today that Cbeyond, Inc. (NASDAQ: CBEY), a leading IP-based managed services provider for small businesses, implemented Count5's Q software companywide to dramatically improve ongoing change initiatives.

Atlanta, GA (PRWEB) October 14, 2008 -- Count5, the inventor of salesforce alignment software, announced today that Cbeyond, Inc. (NASDAQ: CBEY), a leading IP-based managed services provider for small businesses, implemented Count5's Q software companywide to enhance and reinforce training for more than 1,100 employees.

Q is patent-pending software that converts training materials into small, bite-sized pieces and sends it electronically to employees on a recurring schedule. Every piece of information consumed is tracked and evaluated, improving employee retention.

"We have been very pleased with how Count5 and Q have enhanced our training capabilities," says Susan Mitnick, Senior Director for Cbeyond. "Employee training and development is a top priority for Cbeyond. Q technology has strengthened our program and enabled us to quickly train employees on our services."

Using Count5 Q, Cbeyond trainers are able to evaluate information that requires additional reinforcement and proactively offer supplemental training. The result is better-informed employees and more consistent application of new information.

Count5 CEO Eric Blumthal adds, "We are very pleased that Cbeyond is leveraging our technology across its organization to more effectively train its employees. Their focus on employee development has made them a great partner."

About Cbeyond:
Cbeyond, Inc. (NASDAQ: CBEY) is a leading IP-based managed services provider that delivers integrated packages of communications and IT services to more than 38,500 small businesses throughout the United States. Cbeyond offers more than 30 productivity-enhancing applications including local and long-distance voice, broadband Internet, mobile, BlackBerry(R), broadband laptop access, voicemail, email, web hosting, fax-to-email, data backup, file-sharing and virtual private networking. Cbeyond manages these services over a private, 100-percent Voice over Internet Protocol (VoIP) facilities-based network. For more information on Cbeyond, visit www.cbeyond.net.

About Count5:
Count5 is a software company that improves a company's top line by driving accountability to the front line. Count5's salesforce alignment tool - Q OnDemand - raises the success rate of sales strategies, CRM and service initiatives by improving alignment of the workforce with change, and for the first time, by quantifying alignment so problems can be addressed by managers early before performance suffers. Q is a unique communications tool that automates ongoing reinforcement and coaching to frontline employees on a recurring schedule while tracking user participation and retention for managers. This patent-pending process rapidly improves alignment with new initiatives, strategy and messaging.

Count5® was recently named by the Technology Association of Georgia (TAG) as one of Georgia's most innovative technology companies.

Available OnDemand, Q™ can be implemented to drive your next change initiative in less than 30 days.

For more information, call us at (404) 961-7350 Extension 1 or visit our website Count5 Salesforce Alignment, our alter-ego website Funny Sales Cartoons or watch our video overview 3 Minute Overview.

Posted by Industrial-Manufacturing at 05:46 AM | Comments (0)

Sky IT Group and QlikTech Provide Strategic Sales Analysis for Leading Manufacturers and Retailers

Bernard Chaus, G-III Apparel Group, Maggy London, Theory and other manufacturers and retailers are improving merchandising decisions and responding quickly to sales trends with SKYPAD Business Intelligence solution

Radnor, PA (PRWEB) October 14, 2008 - In a tight economy, the ability to increase margins -- even by a few points -- can greatly affect a retailer's profitability. That's why Chaus, G-III Apparel Group, Maggy London, Theory and several other leading apparel manufacturers and retailers are using SKYPAD Business Intelligence, powered by QlikView. Integrating timely point-of-sale data directly with production and distribution data in visual dashboards, SKYPAD enables them to plan, adapt and move goods through the chain faster and better than ever before. For example, if the sales of a specific dress are high in Detroit and low in Miami, retailers and their suppliers can immediately react and move or discount the merchandise accordingly -- without missing out on another day of the sales season.

In partnership with QlikTech, the world's fastest-growing Business Intelligence (BI) software vendor, Sky IT Group, a privately held technology solution provider specializing in consumer goods, offers the analysis capabilities to gain merchandising and supply chain efficiencies with SKYPAD. Powered by QlikView's visual analysis and data integration capabilities, SKYPAD provides manufacturers and retailers with KPI analysis and trends surrounding the sales performance of their goods at the retail point-of-sale level.

"Apparel is one of the most complex sectors within consumer goods. We have to manage thousands of SKUs according to style, color, size, season, outlet and more - and all within a very limited selling period. Having our information available visually, with drill downs to the exact item in the exact location in the product line, store, region or any other variable, allows us not only to be more effective within our own business, it also makes us a tremendously valuable partner to our retail customers," said Ed Eskew, CTO at Bernard Chaus, Inc.

Like Bernard Chaus, Inc., companies using SKYPAD, powered by QlikView, are able to move merchandise and replenish merchandise faster, compare profit margins among different retail outlets, improve promotional programs based on selling trends and gain visibility among hundreds of divisions and brands. Among them:

* For Bernard Chaus, Inc., which designs, sources and markets an extensive range of women's career and casual sportswear, principally under the Josephine Chaus trademark, SKYPAD, powered by QlikView, has enabled the company to reach previously unattainable heights of supply chain visibility while dramatically enhancing its vendor-managed inventory program. In immediately identifying slow-selling items, the tool allows the company to more aggressively discount to ultimately improve sell-through results. Chaus can now monitor hot, swiftly moving items and replenish them or contact the stores proactively to attempt additional sales. As a result, inventory turns have greatly improved.

* Theory, a designer and producer of modern clothing for women and men, is using SKYPAD, powered by QlikView, to analyze sell-through information from their retail customers and from company-owned stores. Theory sales and merchandise executives compare trends and analyze the difference in profit margins between clothing sold through each channel. Based on this intelligence, the company can develop appropriate merchandising plans for the two different types of outlets and ultimately increase sales.

* Because Maggy London International Ltd., the leading better dress, suit and separates brand in America, has such wide network of retailers, the company's sheer volume of data and products made it challenging to obtain meaningful point-of-sale analysis. With SKYPAD, powered by QlikView, Maggy London has better visibility and control over its supply chain and has been able to improve merchandising and allocation.

* G-III Apparel Group, Ltd., a leading manufacturer and distributor of outerwear and sportswear under brands such as Wilsons Leather, Calvin Klein, Kenneth Cole, IZOD, Tommy Hilfiger, Levi's and Dockers, is using SKYPAD, powered by QlikView, to recognize and address sales trends within its various divisions and brands. Through automated, timely and secure distribution of personalized analysis and dashboards, users have access only to the data and analysis to which they are authorized. Executive management has a single view of the latest point-of-sale data across all divisions, enabling them to make better, faster decisions and address any issues immediately.

"SKYPAD is an ideal solution for retailers that want access to powerful and intuitive software without the burden of having to manage the underlying infrastructure," said Anthony Deighton, Senior Vice President of Marketing at QlikTech. "Sky IT Group is delivering value for organizations at the forefront of the retail industry with a cost-effective, visual analysis solution that allows them to focus on their core business."

Sky IT Group joined QlikTech's Qonnect global partner program, which expands the availability of QlikView through alliances with more than 500 solution providers around the world, in 2007 as an OEM and Resell partner. SKY IT launched SKYPAD earlier this year. It is available as an in-house or hosted SaaS (Software-as-a-Service) solution, giving apparel manufacturers and retailers a choice in delivery models.

"In today's challenging economy, retail companies are relying on business intelligence to ensure that they are merchandising in the most efficient way," said Jay Hakami, President & CEO, Sky IT Group. "Based on QlikView's visual analysis capabilities and our retail and apparel manufacturing/distribution domain expertise, Sky IT Group is able to offer solutions that are quick to deploy, easy to use and empower retailers with the ability to make better business decisions. Moreover, we've found it to afford significant competitive advantage as a solution provider."

Editor's Note: Sky IT Group and QlikTech will be showcasing SKYPAD as Gold sponsors of the 2008 Tech Conference, which will be produced by Apparel magazine on November 5 and 6 in New York, NY. In addition, Ed Eskew, CTO of Bernard Chaus, Inc. will present a session at the event. For more information or to register, visit www.apparelmag.com.

About QlikTech
QlikTech's flagship product, QlikView, simplifies analysis for everyone. QlikView works the way your mind works - making associations by connecting data from many sources in a few clicks. This patented in-memory association technology brings fast results and better decision making to a wide range of customers and industries. QlikView is intuitive to learn, simple to modify and can be deployed in less than a week.

Named the world's fastest-growing Business Intelligence software vendor by IDC, QlikTech has approximately 9,050 customers in 86 countries and more than 500 partners worldwide. QlikTech was founded in Lund, Sweden and is headquartered in Radnor, PA (USA) with direct operations throughout Europe and the Americas. QlikTech offers a fully functional, free trial of QlikView and a 30-day money-back guarantee. For more information, please visit please visit QlikView XML RSS Feed.

About Sky IT Group
Located on Fashion Avenue in New York City, Sky IT Group specializes in providing business intelligence solutions to the apparel manufacturing and retail industries. Since 1997, customers, including brands like Elie Tahari, Inc., Garan, Michael Kors, Nautica, Prada (USA), Under Armour Performance Apparel and Valentino, have benefited from the company's solutions that optimize IT investment and produce significant bottom-line benefits. Visit www.skyitgroup.com for more information.

QlikTech and QlikView are trademarks or registered trademarks of QlikTech International AB. Other company names, product names and company logos mentioned herein are the trademarks, or registered trademarks of their respective owners.

Posted by Industrial-Manufacturing at 05:46 AM | Comments (0)

Apollo Introduces Website Designed for Pro Photographers' Convenience

Professional photo lab Apollo Photo Imagizing debuts a new website designed to put pros in control of their photo orders. The new site details the lab's full collection of press-printed and photographic items, all of which were developed to complement standard prints and assist professional photographers in expanding their product offerings and marketing their studios.

Milwaukee, WI (PRWEB) October 14, 2008 -- Apollo Photo Imagizing is pleased to announce a higher level of customer accessibility with the launch of the full-service photo lab's new website. The site provides enhanced product selection and expanded options for professional photographers.

"Our redesigned website makes navigation easier and information more accessible," said Steven G. McCullough, Apollo's vice president of professional lab sales. "We've added order tracking and invoice history to help photographers keep up-to-date on all their orders."

The new site is located at www.apollo-imagizing.com and represents a significant improvement in terms of usability and the amount of information viewable online. Clients can access in-depth product descriptions, samples, designs and templates for the complete collection of photographic and press-printed products, as well as details about the professional lab services that are the cornerstone of Apollo.

"We've timed the pre-holiday release so photographers can enjoy the convenience of the site's new features during this high-volume season," said Eric R. Hegwood, president of SyNet Media. "We also want to encourage pros to try some of the new holiday designs for photographic cards and press-printed cards."

Apollo provides photographic prints, press-printed products and specialty photo items to professional photographers as a division of SyNet Media.

About Apollo Photo Imagizing:
Apollo Photo Imagizing is a one-stop professional lab offering retouching, finishing and mounting along with professional imaging products designed to help photographers generate sales. Apollo's signature collections are the Illuma ProPress line of press-printed products that includes photo guest books, memory books and day planners and ProPhotoCreations specialty photographic items, such as murals, signature boards, dry-erase boards and gallery wraps.

Contact:
Steven G. McCullough
Apollo Photo Imagizing
1-800-747-7371, ext. 113

Posted by Industrial-Manufacturing at 05:45 AM | Comments (0)

Impact Systems Announces ECM Deployment and Migration Solutions Designed for Mid-Market Companies Based on EMC® Documentum® platform

Impact Systems is helping small and medium-sized businesses implement the same enterprise content management solutions as their larger industry counterparts, for a fraction of the cost and time.

Greenville, DE (PRWEB) October 14, 2008 -- Impact Systems Inc., (www.impactinfosys.com), a leading provider of enterprise content management (ECM) software tools and services, today announced enterprise content management deployment and migration solutions that have been specifically designed for and adopted by several mid-market companies to date.

Through dialogue and interactions with customers over the last 12 years, Impact Systems heard from numerous small and mid-market companies that enterprise content management applications were financially out of reach.

This need combined with additional market feedback that Impact Systems received from the small- and mid-market sector - the need to gain operational efficiencies, the need for scalable products, the desire to work with organizations that understand small- and mid-size businesses - led Impact Systems to develop several products and services based on the Documentum platform to cater to this market. Key solutions include:

* Compliance-in-a-Box SOP Edition: A preconfigured, tightly defined solution that provides the compliance and control software needed to manage regulated content (Procedures such as SOPs and Recipes) across the organization - at an affordable price - with rapid configuration, installation and expert services.
* Compliance-in-a-Box Submission Edition: A preconfigured, tightly defined, turnkey solution for emerging pharmaceutical and biotech companies with the need for regulated content management and electronic submissions to meet eCTD guidelines.
* Migration Assessment service: An up-front, stand-alone, fixed cost service to provide guidance in assessing the options and associated effort of migrating to Documentum 6 platforms.

Impact Systems is currently working with several small- and mid-size organizations, including three pharmaceutical manufacturing companies and two biotechnology companies. All of the organizations engaged Impact Systems in recognition of Impact's:

* Understanding of their organizational needs and objectives
* Core philosophy of developing repeatable processes and preconfigured solutions that save customers time, money and risk
* Extensive Documentum expertise and experience in regulated industries.

About Impact Systems, Inc.
Founded in 1996, Impact Systems provides deployment and migration services for Enterprise Content Management (ECM) systems. Additionally, the company has developed a proprietary suite of configuration management, content and metadata transfer, and bulk load software tools that provide significant time and cost savings for deployments, migrations and ongoing electronic content needs. Impact Systems has developed a proven, comprehensive migration process, including an upfront Migration Analysis Assessment. The company has delivered migration solutions to satisfied clients in the life sciences, manufacturing, technology and financial services markets, across ECM (EMC Documentum, FileNet, Open Text, Lotus Notes and SharePoint) platforms. In addition, Impact Systems specializes in deploying regulatory business solutions such as Compliance-in-a-Box for clients in the life sciences (medical devices, biotech, pharmaceutical and healthcare) markets. Impact Systems is a member of the EMC2 Consulting/Select Services Team, and is an Adobe® and Kofax partner. Visit Impact Systems at www.impactinfosys.com or call 302-573-6864 x105.

Posted by Industrial-Manufacturing at 05:43 AM | Comments (0)

iXsystems Sponsors meetBSD California Conference

Polish-originating conference offers talks, entertainment for BSD enthusiasts

San Jose, CA (PRWEB) October 14, 2008 -- iXsystems, a provider of high quality storage solutions and custom rackmount servers, is a primary sponsor and the organizer of the meetBSD California conference. The meetBSD Conference is taking place on the Google campus in Mountain View, California November 15-16, 2008.

The meetBSD conference is devoted to the BSD operating systems with a strong emphasis towards the FreeBSD family. FreeBSD is one of the most used UNIX-like operating systems in the world and is widely renowned as the most stable and secure server operating system. meetBSD was started in Krakow, Poland, in 2004 and has continued every year since then. Last year the conference took place in Warsaw, Poland.

meetBSD promises to enlighten even the most sophisticated BSD user with lively discussion on a wide range of FreeBSD-related topics. Speakers will be highly experienced UNIX experts and programmers giving lectures on topics including Xen (virtualization), the BSD Certification process, isolating cluster jobs, and the ZFS File System.

The meetBSD Conference will culminate with the FreeBSD 15 Year Anniversary Party taking place at the Buddha Lounge in Mountain View, California on the evening of Saturday, November 15. For more information or to register for the conference visit the meetBSD California website at http://www.meetbsd.com/.

About iXsystems
iXsystems is the all-around FreeBSD company that provides FreeBSD-certified servers and storage solutions to the global marketplace. iXsystems also supports and maintains the PC-BSD project and runs the FreeBSD Mall. The company is headquartered in San Jose, CA.

Posted by Industrial-Manufacturing at 05:43 AM | Comments (0)

2008 Medical Electronics Forum in Taiwan

ITRI implemented The Medical Electronics Promotion Service Program to actively guide suppliers in developing key technologies advantage with the collaborating support of the Ministry of Economic Affairs in providing aiding measures.

Taiwan (PRWEB) October 14, 2008 -- With more and more importance and concerns being connected to health and medicine on a daily basis, every country around the world is heading off investing in the health and medical markets, resulting in a recent bloom in the growth of the medical electronics industry. In response to this uptrend growth, the Industrial Development Bureau of the Ministry of Economic Affairs and ITRI have joined forces, holding The 2008 Medical Electronics in Taiwan Forum (from ITRI) on October 2 and 3. With the attendance by over 300 participants, including leading international providing sectors such as GE Health-care and the Roche Pharmaceutical Testing Department, as well as over 100 domestic-providing sectors including Quanta, TaiDoc, Apex, Deantronics and Yonglin etc, this forum will help all participating companies jointly with access to study developmental trends within the global medical electronics industry, and create exchanges and business opportunities between Taiwan and the world.

Achieving the Goal of a One-Stop Shopping Center:
Industrial Development Bureau Director General Chao Yih Chen once said, "Within the last five years, the Taiwan medical equipment industry has been the fastest growing sector among domestic bio-tech industries. The government has been consistently promoting Taiwan to stand as a global 'one-stop shopping center' for medical equipment products. Due to the fact that the medical electronics industry accounts for the largest portion in this field, it has become the focus of the burgeoning strategic industry, causing the government to declare its resolve in enacting policies further supporting this area. In the future, measures such as preferential taxes and R&D subsidies will also be rolled out to continue promoting the development of related industries.

In terms of the critical areas of regulations and testing, suppliers will be actively assisted strengthening fundamentals to come in line with overseas industries. Meanwhile, assistance will also be given to those companies seeking to develop overseas markets and establish international branches."

ITRI President Dr. Johnsee Lee added, "In recent years, the Industrial Technology Research Institute has put forth great efforts in developing medical electronics and medical equipment resources. Taiwan should utilize its advantages in the information and telecommunication industry sector to create a niche for developing high-level medical equipment. It should also take advantage of Taiwan's IT industry superiority to integrate resources from different areas to slice into the manufacturing of high value-added medical electronics equipment product, as well as integrating service demands, while simultaneously seeking innovative technology to continue promoting the upgrading of the industry towards higher quality."

Director of ITRI's Medical Electronics and Device Center, Dr. Yio Wha Shao, noted, "Taiwanese providing sectors in the past usually adopted a 'go at it alone' approach, but when entering the global market, they can actually engage in strategic partnerships with large overseas companies to increase manufacturing quality so as to overcome the challenge of 'small amounts, large variety' phenomenon seen in this field. Therefore this method would establish a reputation for Taiwan brands within the international market."

Joining in Global Growth:
According to ITRI, turnover in the Taiwan medical equipment industry totaled $74.9 billion, accounting for less than 1% of the global market share, and show that a great deal of space for development remains. However, the growth rate of the domestic medical equipment output value is 16.5%, much higher than the global growth rate of 6.1%. Furthermore, the medical electronics industry in Taiwan accounts for up to 60% of the total domestic medical equipment industry, as opposed to the 40% seen globally. Hence the potential for development in this market is rather high in comparison. Taiwanese companies crossing into the medical electronics industry include not only medical equipment suppliers, but also plenty of suppliers from other industries eager to join in.

The Medical Electronics Promotion Service Program, implemented by ITRI, has been actively guiding suppliers in developing key technologies advance, while the Ministry of Economic Affairs also provides a great deal of supporting aid. Methods used by large international companies when establishing their strategies during globalization have been shared so that the local industry can enjoy the best allocation of resources, as well as ideas and direction for new developments in medical equipment area. Local companies currently making strides into the medical electronics markets, such as Quanta, Johnson Fitness and Yonglin, can utilize this forum as an information exchange course on the current situation and challenges faced within Taiwan. With efforts from various industries, the development and growth of the medical electronics industry in Taiwan will be easily guaranteed for the foreseeable future.

Posted by Industrial-Manufacturing at 05:43 AM | Comments (0)

Manitex International Announces New Director of Operations--The Boom Truck and Truck Mounted Crane Company is Expanding its Footprint in the World Market

Manitex International, after acquiring the operations of Crane and Machinery, Inc., and Schaeff, Inc. brings Phil Fridley to the executive team to streamline operations adding to the bottom line. The hiring of a new Director of Operations is a response from Manitex International to the increased demand of its products in the international markets including Europe, Asia and South America.

Austin, TX (PRWEB) October 14, 2008 -- Manitex announced on Tuesday, October 14, 2008, that Phil Fridley is now part of the Manitex executive team as their new Director of Operations. Fridley was formerly the Plant Manager and North American Director of Quality, Health, Safety & Environment at global giant GKN Sinter Metals, serving commercial, consumer and automotive industries.

Fridley offers nearly 30 years of experience in streamlining management for other leading companies, including Grove Worldwide and AAI Corporation. "We are thrilled to have Phil as part of Manitex. His experience and knowledge will add tremendously to our process," says David Langevin, CEO of Manitex International.

Hiring a new Director of Operations is part of Manitex's response to the growing demand of its products in national and international markets. Fridley will head a number of initiatives internally and externally to further expand the reach of Manitex International and its subsidiaries.

Manitex International is steadily increasing its footprint in the market, having gained over 100% in gross revenue in 2007 over 2006, and is actively implementing measures to continue the trend.

Earlier this month, Manitex announced the acquisition of Crane and Machinery, Inc., and Schaeff, Inc. Andrew Rooke, President and Chief Operating Officer of Manitex, commented, "The acquisition of Crane supports our diversification strategy and adds to our existing replacement parts business. We expect Crane's distribution network to accelerate our penetration into international markets, which is a key part of our growth strategy."

According to executives in the company, Fridley will bring together the new divisions in the company while streamlining operational processes, focusing on expanding capabilities, quality control and development.

About Manitex International, Inc.:
Manitex International, Corp. is a leading provider of engineered lifting solutions including boom truck cranes, rough terrain forklifts and special mission oriented vehicles. Manitex subsidiary manufactures and markets a comprehensive line of boom trucks and sign cranes. The boom trucks and crane products are primarily used in industrial projects, energy exploration and infrastructure development, including roads, bridges and commercial construction. The Manitex Liftking subsidiary, which includes the Noble forklift product line, manufactures and sells a complete line of rough terrain forklifts and special mission oriented vehicles, as well as other specialized carriers, heavy material handling transporters and steel mill equipment. Manitex Liftking's rough terrain forklifts are used in both commercial and military applications.

Source: Fahrenheit Marketing Public Relations

Posted by Industrial-Manufacturing at 05:43 AM | Comments (0)

Tripwire, Inc. Streamlines the Opportunity-to-Order Process with WebSource CPQ and Oracle's Siebel CRM OnDemand

Webcom, Inc. Sales Configuration Tool Compresses the Quote-to-Cash Cycle and Increases Sales Effectiveness.

Milwaukee, WI (PRWEB) October 14, 2008 -- Webcom, Inc., a leader in simplified quote-to-order enablement for the selling of complex products and services and a Certified Partner in the Oracle® PartnerNetwork, is pleased to announce that Tripwire, the recognized leader of configuration assessment and change auditing software for virtual and physical infrastructure, has implemented the Webcom WebSource CPQ solution to simplify its quote-to-order process.

Tripwire's flagship product, Tripwire Enterprise, helps IT organizations automate compliance across the data center by verifying that each change to system settings is authorized, within policy and compliant. Tripwire ensures that organizations achieve continuous operational, regulatory and security compliance. With Tripwire Enterprise, IT systems remain in a known and compliant state, reducing risk, ensuring security, and achieving operational efficiency.

"We needed a solution that would help us streamline our sales processes from opportunity to order, both for new business and renewals," said Shawn Sands, Director of Inside Sales at Tripwire. "The combined offering of Oracle® Siebel CRM OnDemand and WebSource CPQ has allowed us to do just that, increasing our effectiveness and productivity."

WebSource CPQ is designed to help drive increased revenues and margins, increased customer satisfaction, reduced costs and improved productivity. Requiring nothing more than a web-browser, WebSource CPQ allows sales people, channel partners and consumers to easily and skillfully configure, price, quote and propose products/services. "The handling of renewals, not just new business is a significant challenge in the technology space, in particular with software firms," said Chris Lesar, Webcom Executive Vice President. "Addressing this key business challenge, as well as handling areas such as bundling, budget-based pricing, quoting of service/support, term-based and traditional license-based pricing, among others, makes WebSource CPQ an excellent fit in the high tech sector", added Lesar.

Addressing the complexities raised by multiple product choices, sales hierarchy, discounting rules, pricing rules and multiple channels, companies can automate quoting, revisions, the approval process, as well as leverage guided-selling and self-service applications with WebSource CPQ. The combination of Oracle Siebel CRM OnDemand and WebSource CPQ allows Tripwire, and others, to:

* Bridge the gap from opportunity to order.
* Simplify the sales process and configure, price, quote and propose a product/service offerings across all channels, anytime, anywhere.
* Generate any document on demand without any duplication of effort or data.
* Drive increased revenues and margins, increased customer satisfaction, reduced costs and improved productivity.

"The combination of WebSource CPQ and Siebel CRM OnDemand forms a potent combination in addressing the opportunity-to-order needs within high tech organizations," said Tom Herrmann, vice president, ISV Management and Programs at Oracle. "A partner such as Webcom provides a valuable extension to the use of Siebel CRM", added Herrmann.

Interest parties can go to Webcom's quoting software and create their own trial instance of the solution, including integration to Siebel CRM OnDemand instantly.

About Webcom, Inc.
Webcom, Inc. provides software solutions that simplify the complex and helps you attain your business goals. Obtain more business by simplifying the quote-to-order process for the selling of complex products and services. Requiring only a browser, WebSource CPQ allows customers to configure, price, quote and propose their offerings across multiple sales and distribution channels, anytime, anywhere. WebSource CPQ addresses the guided selling, proposal generation and multi-level channel management tasks associated with sales configurators, as well as handling the traditional bill of material, routing and diagram generation tasks frequently associated with product configurators. Retain your customers by simplifying case management with ResponsAbility: you've always had the responsibility, now you have the ability to respond. The solutions help drive increased revenues and margins, increased customer satisfaction, reduced costs and improved productivity. Companies utilizing Webcom's products and services include Rockwell Automation, Danfoss, Corning Cable Systems, Network Appliance, Grayhill and Broan-NuTone. Founded in 1997, Webcom is a privately held corporation headquartered in Milwaukee, Wisconsin with offices in the USA and Europe. For more information, visit Webcom at http://www.webcominc.com or call 414-273-4442 (toll free 877-508-6323).

About the Oracle PartnerNetwork
Oracle PartnerNetwork is a global business network of more than 20,000 companies who deliver innovative software solutions based on Oracle software. Through access to Oracle's premier products, education, technical services, marketing and sales support, the Oracle PartnerNetwork program provides partners with the resources they need to be successful in today's global economy. Oracle partners are able to offer their customers leading-edge solutions backed by Oracle's position as the world's largest enterprise software company. Partners who are able to demonstrate superior product knowledge, technical expertise and a commitment to doing business with Oracle qualify for the Certified Partner levels. http://oraclepartnernetwork.oracle.com/.

Trademarks
Oracle is a registered trademark of Oracle Corporation and/or its affiliates.

Media Contact:
Webcom, Inc.
Chris Lesar
(262) 617-8231
clesar @ webcominc.com

Posted by Industrial-Manufacturing at 05:40 AM | Comments (0)

Integrated Project Management Named a “Top Small Workplace” by The Wall Street Journal and Winning Workplaces

BURR RIDGE, Ill. (Business Wire EON/PRWEB ) October 14, 2008 -- Integrated Project Management Company, Inc. (IPM) today announced it is one of 15 companies nationwide named a “Top Small Workplace” by The Wall Street Journal and Winning Workplaces. Winners are profiled in the October 13th Wall Street Journal (www.wsj.com/smallbusiness). IPM provides project management and consulting services to a broad range of industries, including the life sciences, food and beverage, healthcare, and consumer and industrial products.

“Our people are the heart and soul of this company,” said C. Richard Panico, IPM president and CEO. “Together we create an environment of excellence, integrity, honesty, and mutual support. That high standard, in turn, is reflected by the work we perform for our clients.”

Not-for-profit Winning Workplaces teamed with The Wall Street Journal to identify exceptional small organizations in its second annual ranking of Top Small Workplaces. A panel of experts selected IPM as among employers that foster teamwork, flexibility, high productivity, and innovation, while treating their employees with respect, offering opportunities for professional growth, and providing benefits that strengthen employee retention. More than 780 nominations had been submitted.

IPM was cited in particular for nurturing professional development. According to Mary Corbitt Clark, executive director of Winning Workplaces, “Integrated Project Management has developed one of the most sophisticated employee-development systems that we have seen in a small organization, and it is clear that the firm understands that its competitive advantage is tied to the quality and commitment of its employees.” IPM implements a program of frequent and systematic feedback, continuous training, and concrete assistance, such as substantial tuition reimbursement, to enable employees to grow and advance in the company.

In addition to Top Small Workplaces, IPM was recently named for a second consecutive year to Inc. magazine’s annual list of the 5,000 fastest-growing private companies nationwide, and ranked among Chicago area’s top 100 businesses. “Our internal culture is without question a key driver of our business success,” said Mr. Panico.

About Winning Workplaces

Founded in 2001, Winning Workplaces (www.winningworkplaces.org) is an Evanston, Ill.-based not-for-profit, whose mission is to help the leaders of small and midsize organizations create great workplaces.

About IPM

IPM provides project management services to organizations ranging from start-up ventures to Fortune 100 companies, helping them to operate more efficiently and effectively. Service areas include product development, business process improvement, and operations optimization within the life sciences, food and beverage, healthcare, and consumer and industrial product industries. Working onsite with client teams from planning through project completion, IPM helps firms tighten timelines, reduce risk and preserve resources. Founded in 1988, IPM is headquartered in Chicago, with offices in Boston, San Francisco, and St. Louis. For more information, visit www.ipmcinc.com.

Posted by Industrial-Manufacturing at 05:40 AM | Comments (0)

Leading Life Sciences Manufacturer Implements QAD Customer Relationship Management (QAD CRM)

Nuclear Imaging Technology Innovator Digirad Chooses Strategic Information Group and QAD CRM to Secure Growth Objectives

SANTA BARBARA, Calif. & CARDIFF-BY-THE-SEA, Calif. (Business Wire EON) October 14, 2008 -- QAD, Inc (Nasdaq: QADI), a leading provider of enterprise software and services for global manufacturers and Strategic Information Group, a full service provider of enterprise technology and regulatory management solutions, announced today that Digirad (Nasdaq: DRAD), a medical imaging products manufacturer based in Poway, Calif., has gone live with QAD Customer Relationship Management (QAD CRM).

Digirad designs, manufactures and distributes solid-state gamma cameras for nuclear cardiology and general nuclear medicine applications. Digirad brought the world's first commercial solid-state gamma camera for nuclear medicine to market in 2000 using its exclusive, patented solid-state radiation detection technology. As United States’ baby boomers age, the company is experiencing growing demand for its unique technology.

Digirad chose QAD CRM because of its excellent functionality as well as seamless integration with QAD Enterprise Applications, its longstanding ERP platform. “Strategic and QAD helped us identify CRM’s full potential and how we could apply it to our business needs. QAD CRM will help us communicate better internally and quickly address the needs of our customers,” said Donna Vogt, director of customer service for Digirad.

“QAD CRM maximizes communication between sales and customer service. Cross functionality has streamlined processes and helps us respond to customers faster. Now when a customer calls, we can quickly assess their equipment service history and respond to their immediate needs. All necessary information is listed on one easily navigated page. QAD CRM will help us stay on task when following up with the customer’s purchasing process,” said Vogt.

“There is tremendous pressure on life sciences companies to bring new offerings to market, improve operational efficiencies, comply with stringent regulatory requirements and meet customer quality demands — while delivering top-line growth and bottom-line results,” said Doug Novak, president and chief executive officer of Strategic Information Group. “Companies like Digirad rely on Strategic Information Group to help them leverage enterprise technology to grow their businesses, drive ROI and compete successfully in the global marketplace.”

“Today’s life sciences companies need enterprise solutions that provide the utmost agility for the rapidly shifting global marketplace,” said Phil Friedman, vice president, consumer and life sciences industries for QAD. “QAD CRM helps manufacturers create long-term, positive customer relationships that translate to long-term, positive bottom-line results.”

In competitive and volatile markets, maintaining strong customer relations is critical to continued success. Challenged to both sustain and expand the customer base, businesses need industry strength tools to acquire, service and support their most important asset. QAD CRM helps the sales force work smarter and create customer relationships that drive revenue; marketing automation capabilities build pipeline by helping sales and marketing professionals target the right markets and execute campaigns profitably.

About Digirad

Digirad Corporation (NASDAQ:DRAD) is a provider of cardiovascular imaging services and solid-state nuclear medicine imaging products to physician offices, hospitals and other medical services. The company has designed and commercialized the solid-state nuclear gamma camera for the detection of cardiovascular disease and other medical conditions, offering both mobile and fixed imaging systems. Mobile imaging services that include leasing the imaging system, certified personnel and other support required to perform imaging are offered through wholly owned subsidiaries Digirad Imaging Solutions, Inc. and Digirad Ultrascan Solutions, Inc.

About Strategic Information Group

Strategic Information Group helps manufacturers, suppliers, OEMS and virtual manufacturers maximize business value through the application of enterprise technologies. Strategic Information Group delivers a full range of proven enterprise solutions including ERP, CRM, Regulatory Management and Corporate Performance. Strategic Information Group provides consulting, implementation, validation, training and support services to the automotive, consumer goods, food and beverage, electronics, industrial products, and life sciences industries.

About QAD

QAD is a leading provider of enterprise applications for global manufacturing companies. QAD applications provide critical functionality for managing manufacturing resources and operations within and beyond the enterprise, enabling global manufacturers to collaborate with their customers, suppliers and partners to make and deliver the right product, at the right cost and at the right time. Manufacturers of automotive, consumer products, electronics, food and beverage, industrial and life science products use QAD applications at approximately 6,100 licensed sites in more than 90 countries and in as many as 27 languages. For more information about QAD, telephone +1 805 684 6614, or visit the QAD Web site at www.qad.com, or register for the QAD Community at www.qad.com/community.

"QAD" is a registered trademark of QAD Inc. All other products or company names herein may be trademarks of their respective owners.

Note to Investors:

This press release contains certain forward-looking statements made under the "safe harbor" provisions of the Private Securities Litigation Reform Act of 1995. A number of risks and uncertainties could cause actual results to differ materially from those in the forward-looking statements. These risks include, but are not limited to, evolving demand for the company's software products and products that operate with the company's products; the company's ability to sustain license and service demand; the company's ability to leverage changes in technology; the company's ability to sustain customer renewal rates at current levels; the publication of opinions by industry and financial analysts about the company, its products and technology; the reliability of estimates of transaction and integration costs and benefits; the entry of new competitors or new offerings by existing competitors and the associated announcement of new products and technological advances by them; delays in localizing the company's products for new or existing markets; the ability to recruit and retain key personnel; delays in sales as a result of lengthy sales cycles; changes in operating expenses, pricing, timing of new product releases, the method of product distribution or product mix; timely and effective integration of newly acquired businesses; general economic conditions; exchange rate fluctuations; and, the global political environment. In addition, revenue and earnings in the enterprise resource planning (ERP) software industry are subject to fluctuations. Software license revenue, in particular, is subject to variability with a significant proportion of revenue earned in the last month of each quarter. Given the high margins associated with license revenue, modest fluctuations can have a substantial impact on net income. Investors should not use any one quarter's results as a benchmark for future performance. For a more detailed description of the risk factors associated with the company and the industries in which it operates, please refer to the company's Annual Report on Form 10-K for fiscal 2008 ended January 31, 2008.

Posted by Industrial-Manufacturing at 05:40 AM | Comments (0)

The Prince George's County Small Business Initiative Partners with George Mason University to Offer Contracting With the Federal Government Certificate Program

The Prince George's Economic Development Corporation's Small Business Initiative Program (SBI) has partnered with George Mason University's Office of Continuing Professional Education, to offer the Contracting with the Federal Government Certificate Program.

Largo, MD (Vocus/PRWEB ) October 14, 2008 -- The Prince George's Economic Development Corporation's Small Business Initiative Program (SBI) has partnered with George Mason University's Office of Continuing Professional Education, to offer the Contracting with the Federal Government Certificate Program. The program is designed for government contracting professionals to proactively ensure that their business operations remain compliant with current federal standards. This comprehensive program includes five in-depth courses taught by instructors with strong backgrounds in government contracting. This core curriculum is offered in three series: Series I, October 20 - November 13; Series II, January 28 - March 26; and Series III, April 15 - June 25, 2009.

Course content is drawn from Deltek's experience in diverse government contracting environments. The classes are taught by Deltek instructors, in an academic setting at Mason's Herndon Training Center, and cooperatively with Prince George's County Economic Development Corporation, at their training center in Largo, Maryland. In addition, these courses can be scheduled for group training, and delivered at a time and location chosen by the group sponsor.

The series content focuses on recent government contracting trends, including the current regulatory environment, as well as proposed changes to the Federal Acquisition Regulation (FAR) and Cost Accounting Standards (CAS). These highly participatory courses include extensive course material, examples, and resource materials. All courses qualify for 1.3 Continuing Education Units (CEUs) and 16 (CPE's) through George Mason University, and may also lead to a George Mason University certificate award. No advance preparation or prerequisites are required to attend. However, participating students with limited contracting experience are encouraged to attend the "World of Government Contracting" course before attending any of the remaining four seminars.

Courses are scheduled throughout the academic year and can be taken alone or completed as a series to earn a Certificate of Completion in Federal Government Contracting through George Mason University. Experienced professionals who are new or nearly new to government contracting, and professionals in need of a refresher should attend. Participants will gain valuable information and guidance from real world examples of government contracting, expand their knowledge and clarify processes.

The Small Business Initiative Program is a division of the Prince George's County Economic Development Corporation. SBI provides direct assistance to the rapid-growth companies located in Prince George's County to provide access to capital, and contract opportunities. It's partner, named the #1 national university to watch by U.S. News & World Report, George Mason University is an innovative, entrepreneurial institution with global distinction in a range of academic fields. Located in the heart of Northern Virginia's technology corridor near Washington, D.C., Mason prepares its students to succeed in the work force and meet the needs of the region and the world. With strong undergraduate and graduate degree programs in engineering and information technology, dance, organizational psychology and health care, Mason students are routinely recognized with national and international scholarships.

For program information or to register Contact: George Mason University's Office of Continuing Professional Education Tel: 703-993-4800, or visit www.pgcedc.com/sbi/calendarSBI.php or www.ocpe.gmu.edu/cfgpgc.html

Posted by Industrial-Manufacturing at 05:40 AM | Comments (0)

50 States, More Than 3000 Orders for Custom Shipping Boxes Created with Shipping Box Configurator

Custom Boxes Now! announces two important milestones: the company that provides online configuration of custom boxes and packaging has received more than 3,000 custom box orders and shipped orders to all 50 states.

(PRWEB) October 9, 2008 -- Custom Boxes Now! has achieved not one but two important milestones. The company has shipped custom shipping boxes to each of the 50 United States and has received more than 3,000 orders. Stock boxes, packaging supplies, and cardboard product displays, including POP and specialty packaging, are sold through the company website, PackNBoxNow.com. These provide a full line of packaging and display solutions, including custom shipping boxes, used heavily by businesses throughout the United States.

"Custom Boxes Now! allows customers to easily order customized shipping boxes: any style, any size," says COO Bill Calengor. "And our online shipping box configurator lets you see pricing in real time, even while adding custom printing."

More than 3,000 times, Custom Boxes Now! has delivered a quick turn-around on an order for custom shipping boxes. A streamlined system, the Custom Box Configurator, has made all the difference for businesses nationwide that need custom packaging solutions to complement brand identity efforts.

Same day shipping makes the service ideal in today's busy world. Customers simply enter style, quantity, dimensions, color, box strength, and printing required, including custom logo options. Immediately, they can view pricing details, including shipping costs, and if the order is received before noon CST, the custom boxes ship out within 24 hours.

"We are proud of our ability to produce and ship most boxes within 24 hours. We do all we can to give our customers the speed and service they need to make their operations more effective," explains Calengor.

Live help is available too. Furthering the effectiveness and convenience of the shipping box configurator, Custom Boxes Now! provides customer service via live chat, email or phone. Clients gain immediate assistance with challenges that might arise while specifying their custom packaging needs.

Other features of PackNBoxNow.com include:

* Clean web design and easy interface that reflect the clarity and quality of products offered
* A commitment to Green: custom made boxes are 100% recyclable and contain a high percentage of recycled materials.
* No minimum order plus price reductions for larger orders
* As-needed capabilities: customers can order cardboard shipping boxes as they are needed instead of investing in and storing a large amount of stock
* Flexibility: customers can easily respond to changes in their inventory or shipping requirements

To explore custom packaging solutions from Custom Boxes Now! visit PackNBoxNow.com.

About Custom Boxes Now!

Part of the PackNBoxNow.com family of shipping and product display solutions, Custom Boxes Now! is an innovative online interface that connects clients to custom packaging solutions built to their exact specifications. Custom Boxes Now! operates a 200,000 sq. ft. manufacturing facility and a design staff of seven to handle special orders.

Posted by Industrial-Manufacturing at 05:37 AM | Comments (0)

Sanimax Selects Process Industries for Microsoft Dynamics AX from Fullscope

Thirty-five Locations Across the United Stated and Canada to Deploy Microsoft's ERP Solution By 2010.

Atlanta, GA (PRWEB) October 14, 2008 -- Fullscope, a Gold Certified Microsoft Business Solutions Partner focused on helping process and discrete manufacturers manage their businesses more effectively and efficiently, today announced that Sanimax, a leading provider of rendered products based in Montreal, Quebec, has selected Process Industries for Microsoft Dynamics® AX to provide an integrated enterprise resource planning (ERP) solution for 35 locations across the United States and Canada.

The company is a leading North American by-products recycling company. Its business is extending the food supply value chain by returning reclaimed products as useful materials and ingredients. It collects more than a million tons of organic meat by-products and vegetable oils, and transforms them into high-demand goods such as proteins, tallow and biofuel, and sells them to companies around the world.

Sanimax conducted an extensive due diligence process of ERP systems. The company selected Process Industries for Microsoft Dynamics AX because of its flexibility and scalability, and for its multi-country, multi-language and multi-currency functionality. Because Sanimax already uses Microsoft solutions, the new ERP system will also be familiar and easy to use.

Formed by the merger of Sanimal, Anamax and Bi-Pro Marketing in 2005, Sanimax had three separate ERP systems. "We knew that consolidating on one ERP solution that could meet the needs of our entire organization would be a key part to helping us fulfill our 'B1' strategy to standardize all applications and create a borderless organization to focus on company growth," said Michael Ross, Chief Financial Officer of Sanimax. "After a rigorous evaluation, we selected Microsoft and its partner, Fullscope."

"Microsoft Dynamics AX and the Process Industries solution are ideal to help Sanimax support its current and future business goals," said John Scandar, executive vice president and co-founder of Fullscope. "We believe the company has selected the best path to continue to differentiate itself and remain an industry leader."

About Sanimax:
Sanimax is a value-driven organization that creates environmentally responsible solutions for the food, agribusiness and renewable energy industries. Every year the company collects more than a million tons of animal and food by-products all over North America. Sanimax is also a leader in recycling vegetable oils, and hides and skins, providing essential, reliable and sanitary services. Transforming that material into high-quality products destined for industries around the world, including feed companies, the energy industry, chemical manufacturers, tanneries, soap producers, and pet food manufacturers. http://www.sanimax.com

About Fullscope:
The 2007 and 2008 Microsoft Dynamics AX Partner of the Year, Fullscope, Inc. is a Microsoft Gold Certified Partner that offers deep domain expertise for companies with process, discrete and hybrid manufacturing operations. The company develops and supports Process Industries for Microsoft Dynamics AX; offers a Certified for Microsoft Dynamics AX solution for high tech; and is one of the largest Microsoft Dynamics AX resellers in the United States and Canada. For more information, visit http://www.fullscope.com.

The names of actual companies and products mentioned in this press release may be trademarks or registered trademarks of their respective owners and are hereby acknowledged.

Posted by Industrial-Manufacturing at 05:37 AM | Comments (0)

Governor Schwarzenegger Signs Groundbreaking Legislation at Nelson Nameplate Implementing Green Chemistry Program

Last week California State Governor Arnold Schwarzenegger signed into law two bills that make up the country's most comprehensive program regulating the use of chemicals that have been linked to potentially deadly effects on human health. Los Angeles manufacturer Nelson Nameplate Company was the site of the historic bill signing; on the heels of the company's own internal efforts to reduce the number of toxic chemicals the company uses to create metal nameplates and membrane switches.

(PRWEB) October 9, 2008 -- Last week California State Governor Arnold Schwarzenegger signed into law two bills that make up the country's most comprehensive program regulating the use of chemicals that have been linked to cancer, hormone disruption and other potentially deadly effects on human health.

Los Angeles manufacturer Nelson Nameplate Company was the site of the historic bill signing; on the heels of the company's own internal efforts to reduce the number of toxic chemicals the company uses to create metal nameplates and membrane switches. Nelson co-president Tom Cassutt was honored that his company was chosen for the historic moment. "We worked long and hard to reduce the number of toxic chemicals our company uses. Our efforts have not only resulted in better working conditions for our employees, but have also reduced the impact we have on the local and global environment," he said. "We're proud to be part of the leading edge in making a difference and effecting change."

The new law (AB 1879 and SB 509) now covers more than 80,000 chemicals now in circulation among many products lines (as opposed to the more narrowly focused bills of the past looking only at everyday household products like baby bottles, mattresses, toys, cosmetics and computers). Now, State regulators are charged with controlling the most dangerous and widespread chemicals first at the manufacturing stage in an effort to keep them from being handled by workers, being incorporated into products, or escaping into the air or water.

Lobbyists for manufacturers and automakers fought the bill intensively, citing that they currently comply with European standards that are currently stricter than current federal laws. However, some manufacturers are voluntarily taking the initiative to reduce the number of harmful chemicals and toxic waste involved in their production.

Cassutt and Nelson Nameplate worked closely with the nonprofit Institute for Research and Technical Assistance spending close to three years and more than $120,000 in researching ways to reduce the number of harmful chemicals his company used. "There were times when we literally tried 30 different substances and it was the 31st one that worked. It does require a commitment to stay the course," Cassutt said. "But it's more than paid for itself. If you can figure out how to get the toxics out of your business, the economic justification is there."

With just one improvement made to one process, Nelson Nameplate managed to reduce their smog-producing exhaust by 60%. Metal sheets used in manufacturing nameplates used to be cleaned in a process that involved dipping them into a 250-gallon vat of 1,1,1-trichlorethane. Now, that dangerous process has been essentially replaced by soap and water - getting the sheets even cleaner than before. In another example of improvements, the company now uses water-based solvents in its lithographic and screen printers that are used to make membrane switches. Furthermore, the high-solvent inks have been replaced with pollution-free ultraviolet inks.

The overall results have been astounding - not only environmentally, but also financially. In the last 10 years, Nelson Nameplate has reduced their smog-causing emissions by 80%. In addition, the initial $120,000 investment was recouped through no longer needing to purchase expensive chemicals in just 2 years.

Since its founding in 1946, Nelson Nameplate has manufactured metal nameplates, delivered rapid prototyping and overlays for use on products produced by Fortune 500 companies. Now, Nelson is also a leading manufacturer of membrane switches and a leader in membrane switch design.

Posted by Industrial-Manufacturing at 05:37 AM | Comments (0)

Tree of Life Adds Hearts&Minds Peanut Butter With Olive Oil and Omega-3 To Its Selection

Nation's leading natural product distributer adds Hearts&Minds Peanut Butter to inventory and increases availability.

Chicago (PRWEB) October 9, 2008 -- Hearts&Minds LLC, a new food company dedicated to making the foods that you love to eat better for you and with great taste, today announced that Tree of Life, Inc., the nation's leading, natural products distributor, began selling Hearts&Minds Peanut Butter with Olive Oil and Omega-3 (EPA/DHA). This product is the first all-natural peanut butter with olive oil and omega-3 (EPA/DHA).

"We know that it can be difficult for consumers to change from eating foods that they like to foods that are good for them. Now we can offer them one of their favorite comfort foods made with two ingredients known for heart health, olive oil and omega-3, and with great taste," said Robert Gonzalez, President of Hearts&Minds. "With Tree of Life, we can dramatically extend our distribution reach leveraging this leading distributor of natural and gourmet products."

Hearts&Minds LLC has seen great consumer acceptance since the launch of its peanut butter in March 2007 with the product on shelves in grocery and health foods stores in California, Illinois, Massachusetts, Missouri, Maryland, Texas and Wyoming. The Tree of Life distribution network reaches over 10,000 natural and traditional grocery stores and provides an efficient way to market and sell to stores across the country. Hearts&Minds is also carried by DPI-Midwest, a regional distributor of specialty and perishable food items, and is partnered with SourceOne Sales and Marketing, a national syndicate of food brokers.

Unlike other peanut butters, Hearts&Minds replaces 40 percent of the peanut oil in each jar with heart-healthy olive oil allowing it to be the first peanut butter with a health claim. And each serving contains 100mg per serving of omega-3 (EPA/DHA), great for brain, eye and heart health. Finally, using a unique formulation and high-quality ingredients, Hearts&Minds peanut butter also has more roasted peanut flavor than traditional peanut butters, making it both healthy and tasty.

About Hearts&Minds, LLC.
Hearts&Minds LLC is a new food company dedicated to making the foods that you love to eat, better for you and with great taste. Founded by a trio of experienced entrepreneurs from the food industry, Hearts&Minds creates great tasting products thoughtfully made with the consumer's heart in mind by using heart healthy olive oil and omega-3 (EPA/DHA) to replace a portion of the fat in foods consumers love. Find more information at http://www.hearts-n-minds.com.

About Tree of Life, Inc.
Founded in 1970, Tree of Life, Inc. is proud to offer retailers, from coast to coast, a complete selection of natural, organic, specialty, ethnic and gourmet food products. Tree of Life seeks to meet the needs of consumers who choose a lifestyle of "Living Well" by offering distributing natural products like Kraft Foods, Nestle', Horizon Organic, Blue Diamond, Manischewitz, and McCormick nationwide.

Posted by Industrial-Manufacturing at 05:37 AM | Comments (0)

QuoteWerks Expands CRM Compatibility With Support For ACT! 2009 (11.0) and SalesLogix 7.5

Orlando, FL (Vocus/PRWEB ) October 9, 2008 -- Aspire Technologies, Inc., a leading provider of sales quoting software solutions for the global small and midmarkets, confirmed its support for Sage Software's popular CRM applications ACT! 2009 and SalesLogix 7.5. Support for the latest versions of these popular CRM products by Sage Software, was made available in Build 39 for QuoteWerks 4.0, which is currently available for new and existing QuoteWerks users.

The seamless integration between QuoteWerks and ACT! enables users to launch QuoteWerks from within ACT!, streamlining the sales quoting process and eliminating redundancies and errors often associated with the use of disparate systems. The QuoteWerks integration with ACT! offers such features as:

- Automatic inclusion of the current contact's information in the quote.
- Ability to pull additional contact information, such as customer specific tax rates and terms, into the quote via the QuoteWerks DataLink feature.
- Ability to search the ACT! database for additional contacts for use in the quote.
- Automatically schedule follow-up calls, to-do items, and meetings in ACT! when saving a quote in QuoteWerks.
- Automatically create/update Sales Opportunities and completed Sales Opportunities in ACT!
- Upon saving a quote, QuoteWerks automatically creates a link to the quote under the Documents tab in ACT! for easy retrieval.
- Ability to use customer profiles in ACT! to automatically determine the customer's specific pricing for products and services that are added to the quote.
- Print information from ACT! custom fields on QuoteWerks documents (quotes, orders, and invoices).
- Emails sent from QuoteWerks are automatically logged into the ACT! history for the contact.

The SalesLogix 7.5 integration requires the QuoteWerks Corporate Edition and affords users the following capabilities:

- Automatically pull SalesLogix contact information into the quote.
- Automatically create and update QuoteWerks document attachments in SalesLogix for easy retrieval.
- Automatically schedule calls within SalesLogix when saving the quote.
- Automatically create and update Opportunities and Closed Opportunities within SalesLogix.
- Ability to pull other information stored in SalesLogix into the quote such as customer specific sales tax rates and customer terms.
- Ability to use customer profiles in SalesLogix to automatically determine the customer's specific pricing for products and services that are added to the quote.
- Print information from other SalesLogix fields on QuoteWerks documents (quotes, orders, invoices).

"Enabling the sales rep to automatically push and pull data between the company's CRM and quoting solution, as we do with QuoteWerks, helps ensure greater efficiency and accuracy when preparing and tracking sales quotes," explains Keith Carrington, Vice President of Sales and Marketing at Aspire Technologies, Inc. "Successful companies are those businesses that can reduce their costs and human errors, while automating redundant sales processes to achieve greater efficiency in responding to the pre-sales demands of the customers. Our integration with ACT! and SalesLogix help businesses that use these applications achieve the efficiency and accuracy they demand of their sales quoting process in order to remain competitive and successful in any market setting."

QuoteWerks currently serves over 48,000 users in 80 countries. The software is offered in three editions to meet the varying needs of any business and industry that provides sales quotes to their customers. Additionally, QuoteWerks offers a multitude of CRM and accounting system integrations, allowing companies to maintain their deployed systems when adopting QuoteWerks for the sales quoting operation. These features, coupled with the concurrent user model and one time license acquisition fee, enable users to realize a profitable ROI on their purchase within a short period of time.

Aside from integrating with the latest version ACT! and SalesLogix, QuoteWerks offers backwards compatibility with previous versions of both CRM applications.

To learn more about the QuoteWerks integration for these and other CRM integrations, please visit: http://www.quotewerks.com/cmfaq.asp

Aspire Technologies, Inc. will be exhibiting the latest ACT! and SalesLogix integrations at the Sage Summit in Denver, Colorado November 16-20, 2008. In addition, the QuoteWerks integration with Peachtree and the new third party integration between QuoteWerks and MAS 90 will be demonstrated at the show, which is open to end users of Sage Software products and services. QuoteWerks will be exhibiting at booths 301 and 303.

About Aspire Technologies and QuoteWerks®
Aspire Technologies, the creators of the award winning QuoteWerks® sales quoting software, is the leading provider of sales quoting software with its award winning QuoteWerks® application deployed to thousands of businesses and enterprises worldwide. QuoteWerks® integrates with leading CRM and accounting packages, along with IT distributors D&H®, Ingram Micro®, SYNNEX®, and Tech Data®, enabling businesses in all industries to integrate QuoteWerks™ seamlessly into their existing environments. Aspire Technologies is headquartered in Orlando, Florida and is a Microsoft Gold Certified Partner. For more information please visit www.quotewerks.com.

QuoteWerks is a registered trademark of Aspire Technologies, Inc. Other trademarks referenced are the property of their respective owners.

Media Contact:
Keith D. Carrington
Vice President of Sales & Marketing
Phone: (407) 248-1481
Fax: (407) 248-1482
keith.carrington@quotewerks.com

Posted by Industrial-Manufacturing at 05:37 AM | Comments (0)

October 13, 2008

Doe Run Smelter Air Monitoring Reflects Attainment

State Implementation Plan initiatives accomplish attainment goal in 3rd quarter

St. Louis (PRWEB) October 9, 2008 -- The Doe Run Company today announced that all nine of its air monitors near the company's Herculaneum, Mo., facility successfully attained the National Ambient Air Quality Standard (NAAQS) for lead during the third quarter of 2008.

In April, the company completed installation of the 60-plus engineering and administrative control measures outlined in the 2007 State Implementation Plan (SIP). This plan, developed through long-term strategic discussions between Doe Run representatives, the Missouri Department of Natural Resources, the U.S. Environmental Protection Agency (USEPA) and numerous specialty engineers and consultants, was designed to improve air quality and bring the area into consistent attainment with the NAAQS for lead.

"We believe the SIP projects were instrumental in helping us achieve attainment for the second consecutive quarter following implementation of the engineering and administrative controls," said Gary Hughes, general manager of the Herculaneum smelter. "But our ultimate goal is more far-reaching than to consistently be in attainment of the air quality standard. We want to continually improve those measurements day after day in every way we can as we simultaneously continue to invest in technologies that will reduce environmental impacts even more."

The USEPA's specified air quality standard for lead is 1.5 micrograms per cubic meter of air (averaged over a calendar quarter). According to data collected by Doe Run and reported quarterly, the company's nine ambient air-monitoring stations in Herculaneum ranged from 0.1 to 0.7 micrograms of lead per cubic meter of air. The Broad Street monitor, now inside the newly established property boundary fence line, is no longer located in ambient air and will now only be used for informational purposes as described in the 2007 SIP requirements.

The SIP is a process used throughout the United States to improve air quality and help achieve federal air standards -- in this case, for lead. Doe Run has made steady progress on design, engineering and construction of the measures called for in the SIP. The entire plan contained a number of diverse engineering and administrative control measures that took two years to complete at a cost of more than $8 million.

A related project included extending the smelter's property boundary to create additional space between the smelter and the neighboring community. The newly installed fence line was constructed in such a manner as to preclude public access while allowing an unfettered view of the green space. The landscaping plan included the planting of 100 trees to support Herculaneum's Tree City USA initiative.

About The Doe Run Company
Based in St. Louis, The Doe Run Company is a privately held natural resources company and the largest integrated lead producer in the Western Hemisphere. Dedicated to environmentally responsible mineral and metal production, Doe Run operates one of the world's largest, single-site lead recycling facilities, located in Boss, Mo. The Doe Run Company and its subsidiaries deliver products and services necessary to provide power, protection and convenience. Doe Run has operations in Missouri, Washington and Arizona. For more information, visit http://www.doerun.com.

Contact:
Kent Martin
314-453-7661
kmartin @ doerun.com
http://www.doerun.com

Posted by Industrial-Manufacturing at 02:04 AM | Comments (0)

The MathWorks Introduces Simscape Language for Physical Modeling

New Capability Enables Definition of Physical Domains and Components for Developing Mechatronic and Other Multidomain Systems in Simulink

NATICK, Mass. (Business Wire EON/PRWEB ) October 9, 2008 -- The MathWorks today announced the availability of the Simscape language, a new capability that enables textual authoring of physical modeling components, domains, and libraries in the Simulink environment. The new language is included in Simscape, which extends Simulink for modeling and simulating mechatronic and other multidomain physical systems using a physical network, or acausal modeling, approach.

The new Simscape language, based on the widely used MATLAB language, enables engineers to develop reusable models of components and systems for rapidly advancing technologies, such as fuel cells, wind power systems, and hybrid electric vehicles. With this new capability, Simscape can be extended by end users and partners to create and share reusable models, thereby raising the efficiency of teams and improving communication.

With these shared physical models, design teams can simulate system behavior more accurately, develop more robust control strategies, perform design tradeoffs, and find system performance errors early in the development process. Companies can explore more design options and help reduce the cost of testing, as errors are found in simulation rather than requiring hardware prototypes.

“The new Simscape language is quite powerful. It lets me create custom components, a ‘must have,’ when modeling physical systems,” said Dr. Arie Weeren, manager academic support ICT, University of Antwerp. “The language is also very intuitive. Anyone with existing MATLAB skills will find it easy to use Simscape.”

As systems grow in complexity and require the integration of additional technologies, such as with mechatronics systems, engineers need simulation tools that span electrical, mechanical, hydraulic, and other physical domains. In the past, engineering teams needed to master unrelated tools from multiple software vendors and learn to connect them together in cosimulation, which is time-consuming, can require detailed understanding of simulation techniques, and makes automated validation testing challenging. Now engineers can work in a single environment by combining Simscape with domain-specific physical modeling tools from The MathWorks (SimElectronics, SimMechanics, SimDriveline, SimHydraulics, and SimPowerSystems), and avoid the complex task of setting up cosimulation.

“The MathWorks has a long history, since Simulink was first introduced in 1990, of helping users create models and executable specifications to help improve communication of requirements and design concepts between engineering disciplines, which is critical in mechatronic and other system design,” said Jim Tung, MathWorks Fellow. “As part of our commitment to addressing customer demands, we continue providing new capabilities to support the development of system-level physical models for simulation, helping users ensure solid results while reducing the money spent on real prototypes.”

Pricing and Availability

The Simscape language is available immediately as part of the Simscape product. Simscape requires MATLAB and Simulink (each sold separately). U.S. list prices start at $2,000. SimElectronics, SimMechanics, SimDriveline, SimHydraulics, and SimPowerSystems are also sold separately. For further information, please visit the product Web site at: www.mathworks.com/products/simscape/index.html

About The MathWorks

The MathWorks is the world’s leading developer of technical computing and Model-Based Design software for engineers and scientists in industry, government, and education. With an extensive product set based on MATLAB and Simulink, The MathWorks provides software and services to solve challenging problems and accelerate innovation in automotive, aerospace, communications, financial services, biotechnology, electronics, instrumentation, process, and other industries.

The MathWorks was founded in 1984 and employs more than 2,000 people worldwide, with headquarters in Natick, Massachusetts. For additional information, visit www.mathworks.com.

MATLAB and Simulink are registered trademarks of The MathWorks, Inc. See www.mathworks.com/trademarks for a list of additional trademarks. Other product or brand names may be trademarks or registered trademarks of their respective holders.

Posted by Industrial-Manufacturing at 02:01 AM | Comments (0)

BuyDesign® Channel Sales from TDCI Now Integrated with Infor ERP SyteLine

Web-based Software Streamlines Quoting & Ordering of Configurable Products for Dealer, Distributor and Company Sales Personnel

Columbus, Ohio (PRWEB) October 9, 2008 - . TDCI, Inc. (TDCI), the leading provider of configurator-based software solutions, announced today that BuyDesign Channel Sales is now available with integration to Infor ERP SyteLine (SyteLine). BuyDesign Channel Sales is an advanced Internet-based software solution that streamlines quoting and ordering of configurable products for any or all of a manufacturer's sales channels, including dealer, distributor, and company sales forces. It guides sales people through selection of the product, features, options, and dimensions that best fulfill a customer's needs, calculates pricing, and generates proposal documents along with product images, drawings, and CAD models as needed. Once accepted, quotes can be instantly turned into orders that are passed electronically to SyteLine along with configuration-specific manufacturing instructions. BuyDesign Channel Sales can be deployed on the web or distributed to desktop or laptop PCs with automated data synchronization via the Internet.

Integration between BuyDesign Channel Sales and SyteLine automates the sharing of customer, product, and order information between BuyDesign and SyteLine. It is immediately available for SyteLine 8 and is easily tailored for earlier releases.

BuyDesign Channel Sales is built around BuyDesign Configurator, the same product configurator delivered by Infor as an option with SyteLine 8 Order Entry. Because BuyDesign Channel Sales and SyteLine share the same product configurator, companies have a single point of control for management of product configuration rules, pricing and other product data. This greatly simplifies both implementation and on-going management of the combined solutions.

BuyDesign Channel Sales and BuyDesign Configurator are components of TDCI's comprehensive BuyDesign guided selling and configuration solution developed to streamline the sales process for customized products. BuyDesign helps companies that manufacture products with a wide range of features, options, and dimensions increase sales by becoming 'easy to do business with' while at the same time reducing order processing time, cost, and errors.

"Many manufacturers are already using BuyDesign Configurator with SyteLine, and a growing number are adding BuyDesign Channel Sales to support their direct and/or indirect field sales forces," said Dan DeMuth, TDCI President. "Now, with implementation-ready integration, the deployment process is even faster and easier."

Dozens of manufactures have installed BuyDesign Configurator since Infor incorporated it into Infor ERP SyteLine 8 in 2007. Those companies manufacture and sell a diverse range of highly configurable products such as medical equipment, truck trailers, packaging, cabinets, windows & doors, farm equipment, measurement devices, seating, pumps, manufactured homes, storage systems, recreational boats, and many other products. Companies already in the process of implementing BuyDesign Channel Sales with SyteLine include DRI-STEEM and Temtrol, both HVAC manufacturers; S2 Yachts, makers of Tiara Yachts and Pursuit Boats cruising and fishing boats; and Southern Staircase, a manufacturer of pre-built custom staircases.

About TDCI and BuyDesign
TDCI (www.tdci.com) specializes in helping manufacturers and their distributors streamline the buying process for customized products. TDCI's BuyDesign® software is a comprehensive web-based guided selling and configuration solution developed to help companies increase sales by becoming 'easy to do business with' while improving profitability by reducing order processing time, cost, and errors. Built using a powerful product configurator, BuyDesign provides modular applications for guided product selection and configuration, product visualization, quoting and ordering, drawing and data generation, consumer interest creation, intelligent product catalogs and more.

Posted by Industrial-Manufacturing at 02:01 AM | Comments (0)

Holden Advises on Survival Pricing: Prolonged Economic Crisis Requires Immediate, Unconventional Tactics

Experts are warning of a prolonged economic crisis -- leaving managers to wonder what can they do to ensure their company survives the downturn? Top pricing strategist Reed Holden advises managers to employ tough Survival Pricing in order to keep their company's doors open.

Concord, MA (PRWEB) October 8, 2008 -- Dr. Reed Holden, one of the world's leading pricing strategists, called for companies to employ survival pricing tactics in order to endure the current financial crisis. Dr. Holden called for measures that go beyond already difficult recessionary tactics, to policies that will help companies survive during a period of economic decline.

"Times like these call for Survival Pricing. Survival Pricing focuses on immediate pricing actions businesses need to take in order to make it through a deep and potentially long financial crisis," stated Holden. "The tactics are harsh and often unpopular, to be sure, but they are the actions managers need to take to remain financially viable during one of the worst economic times we've had to face in recent history."

Holden recommends managers take the following steps to ensure business viability in the future:
1. Move to Incremental Cost Pricing-real incremental costs. The job of pricing is to keep contribution dollars flowing into the system. Any dollars are better than no dollars. If you are in a value-based space and demand starts slipping, a cost-based approach will assure that your customers are getting the best possible prices. They will need those prices to survive.
2. View labor as an incremental cost. Yes, we want to protect the parking lot but you can cost yourself out of the market today. Your job is to keep the engine going, not to keep everyone employed. If you wait too long to deal with this, you may lead the company to bankruptcy and/or insolvency. Call the union representatives and get them involved with this.
3. Eliminate all unnecessary costs. Dump the jet and first class travel. Close the executive dining hall and bring a sandwich. Eliminate all "corporate" and brand advertising and promotion. Instead, divert those budgets to sales effectiveness. Do better with deal tracking, buying center analysis, customer level value propositions and dealing with RFP's.
4. Continue to look for valued services that will keep customer costs low. Look for things like faster and more reliable delivery that keeps customer costs low, better training and on-line support that improves efficiency, improved packaging. Don't cut those services, instead offer them to the customers that will pay for them at a reasonable price-even based on the costs.
5. If price buyers and poker players want "bare bones" pricing, give it to them but take away the value services. If they complain, that's a good thing. You will better understand their pricing threshold.
6. Execute brutal fences around those valued services. Companies can't afford to give them to price buyers any more, so don't.
7. Determine the true cost to serve a customer and if you're losing money, fire them. Let the competition serve them. If you really know your true cost for serving a customer and your prices are below those costs, you can't afford to serve them any more.
8. Change your pricing strategies, especially if they are either skim or penetration. In downturns, customer demand is inelastic so eliminate penetration pricing to build volume or share. Don't spiral into price wars. Skim strategies might leave you very vulnerable to competitors.
9. Have a steady hand on the tiller. This is not the time to panic it is the time to be strong and confident. Show customers that confidence. Be honest with them but keep them confident in you. Especially with pricing. Don't let business conditions rattle you or your people.
10. Become a value leader in the firm. Confidence in value leads to confidence in pricing. Confidence in pricing leads to survival during these difficult times.

To read more tactics and the full statement by Dr. Holden, please see his blog entry "The Economy, Parking Lots, and Survival Pricing" at http://reedholden.wordpress.com.

About Holden Advisors:
Reed Holden is CEO and Founder of Holden Advisors pricing consultancy and training firm that specializes in working across product, marketing, pricing, and sales functions to improve pricing performance.

About Pricing with Confidence:
The book, Pricing with Confidence: Ten Ways to Stop Leaving Money on the Table, is published by Wiley & Sons, describes easy-to-understand steps companies can take to design and implement pricing approaches that are profitable, even in challenging times. For more information on what pricing strategies your company can adopt when markets change, and to learn more about the book, order a copy, or to view upcoming seminars see: www.pricingwithconfidencebook.com.

Posted by Industrial-Manufacturing at 02:01 AM | Comments (0)

Integrated Labels Offering Further Expands Printing Offering From My1Stop.com

My1Stop.com continues its product expansion adding multipurpose integrated labels to the award winning website. The new offering includes same day shipment of more than twenty innovative products that combine shipping labels and documents into single sheet.

Ft. Scott, KS (PRWEB) October 8, 2008 -- My1Stop.com continues its product expansion adding multipurpose integrated labels to the award winning website. The new offering includes same day shipment of more than twenty innovative products that combine shipping labels and documents into single sheet.

The integrated labels offering includes products used by many industries to save time cut costs and reduce errors. Printing the label and document simultaneously ensures that the labels and documents are correctly matched. Health care professionals can order ready-to-ship integrated labels for lab sample kits, hospital tag systems and prescription label and information sheet combinations. As an example, marketing and product managers count on integrated labels to combine serialized labels with matching warranty sheets. These multipurpose label forms also offer benefits for product managers, warehouse and distribution managers for rack labels, totem labels and combined shipping label and packing slip applications.

The minimum order of stock integrated labels is just one case. Blank integrated labels are available for immediate shipment and can be instantly priced and ordered by contacting customer service and by ordering securely online at www.my1stop.com.

"Integrated labels are used in almost every industry," said Michael Del Chiaro, president. "Our stock offering of integrated labels includes the most popular configurations based on label sizes and position on the sheet," continued Del Chiaro. "Our integrated label customers include pharmacies, consumer products companies, distribution software suppliers -- almost the complete range of industries and applications," concluded Del Chiaro.

Over 20 different integrated shipping label products comprise the new offering. The products differ in the location and size of the integrated label or labels. Most of the integrated label sheets feature a single label. Integrated label products with multiple labels are used for inventory tracking and prescription labeling as well as for providing a shipping label and a return goods label in the same form.

The expansion into integrated labels marks the sixth major product expansion of 2008 for My1Stop.com. Recent expansions include plastic card printing, presentation folder printing and magnets. All of the products in the 2008 expansions can be instantly priced and ordered securely online or by contacting the award winning My1Stop.com customer service team.

About My1Stop:
America's online printing superstore delivers award winning site design, instant online printing prices and innovative commercial printing products like integrated labels to our custom printing customers every day. We are your one stop for commercial printing and more.

Michael Del Chiaro
President
My1Stop.com
1-800-691-7867
mdelchiaro @ my1stop.com

Posted by Industrial-Manufacturing at 02:01 AM | Comments (0)

TrendPointers Introduces a New Sentiment Indicator to Look into the Economic Future

Economic sentiment and consumer confidence are changing continuously, and have a direct effect on future economic spending and investment.

(PRWEB) October 8, 2008 -- TrendPointers℠ introduces a new Sentiment Indicator to look into the economic future. TrendPointers Sentiment Signals℠ is a business sentiment and consumer confidence indicator for economic planning, investment strategy, manufacturing , marketing and inventory planning . TrendPointers provides the most timely measure of sentiment and how it will translate into eventual economic activity. Recent forecasts predicted consumer spending with 95%+ accuracy.

According to Rich Spitzer, Publisher, there has been a critical need for an improved indicator of Economic Sentiment and Confidence for our volatile information age. The continuous flow of economic information influences the opinions and activity of economic observers, business decision makers and consumers on a near daily basis, and TrendPointers is an improved methodology to understand the psychology of today to forecast the economic activity of tomorrow.

Sentiment is important because it's the one indicator that encompasses all the moods and opinions of the economic markets which eventually have a direct impact on actual consumer spending, business investment, retail sales and other economic measures. Unlike conventional indicators that measure only the effects of sentiment, TrendPointers was designed to measure and track the causes and catalysts in order provide a more timely and sensitive measures of sentiment. We then translate Sentiment into forecasts of consumer spending, retail sales and other measures of economic activity.

TrendPointers provides a monthly trend report, with bi-weekly data, of the trajectory of emerging sentiment and forecasts of key economic reports. Every type and size of business uses economic and consumer sentiment /confidence indicators to determine how and when to make investments, build a new plant, hire employees, add inventory, plan manufacturing, buy raw materials, invest in equities or make other economic decisions. TrendPointers Sentiment Signals can provide a new dimension to economic and business planning models and decision criteria.

A recent statistical analysis of Sentiment Signals vs. conventional confidence indicators demonstrates a superior predictive relationship with reports of future economic activity such as consumer spending and retail sales. When translated into actual forecasts, Sentiment Signals had 95%+ accuracy in predicting future consumer spending (other comparisons are being developed).Combined with other economic variables Trend Pointers can be an integral component of economic models and provide a more timely forecast of economic sentiment, sales and spending weeks and months in advance.

Please visit www.trendpointers.com for the complete story, send for a sample report and become a charter subscriber. For further information call Bill DeGryse, National Marketing Manager at 224-565-6478 or Rich Spitzer, Publisher at 877-550-1907.

Posted by Industrial-Manufacturing at 02:01 AM | Comments (0)

OPC DataHub First to Put all of OPC Data into Excel

Now you can drag and drop OPC timestamps, quality, and data type into an Excel spreadsheet, in addition to data values.

Georgetown, Ontario (PRWEB) October 8, 2008 -- Cogent Real-Time Systems announces that the OPC DataHub is the first OPC-to-Excel product capable of feeding OPC timestamps, quality, and type, as well as data values, into an Excel spreadsheet in real time. Unlike other products that offer only data values, the OPC DataHub's unique technology now provides all the information that any regular OPC client receives, live in Excel.

"There are other products on the market that claim the ability to connect OPC to Excel, but they only write the value, so you only get part of the picture," said Andrew Thomas, President of Cogent. "The commonly-used properties of OPC are value, timestamp, quality and type. Most OPC clients receive all of these, and now the OPC DataHub puts all of them into Excel.

OPC, or Open Connectivity, is a Windows protocol for industrial automation. It provides a common language for software to exchange data in real time. The basic elements of this communication are: 1) the value of a particular data point, 2) a timestamp at the instant the point was updated, 3) the quality of the connection, and 4) the type of data. Putting all that information into Excel gives a complete picture of what is happening in the connected process.

In addition this expanded capability, the OPC DataHub provides a convenient user experience. With the OPC DataHub, users can drag and drop point values directly into their spreadsheets. It can display OPC array points as Excel ranges and transmit Excel ranges as array points. And the OPC DataHub acts as both a DDE client and server, so you can both write data to Excel and also read data from Excel.

Excel connectivity is one important piece of the complete OPC DataHub package. The OPC DataHub is an integrated tool that gives quick, reliable, and secure access to valuable information direct from the factory floor. It seamlessly links Excel to live process data coming from any OPC server or client, embedded system, or database. It can then extract and present critical data in real time to an engineer or manager in a form most suitable: OPC client, database, spreadsheet, email, web page, or custom program.

Founded in 1995, Cogent Real-Time Systems is the leader in real-time cross-platform data integration between Windows, Linux and QNX. Customers include the Bank of Canada, Cadbury Chocolate and the European Space Agency. Cogent leverages its experience in real-time data communications to provide the next generation of OPC products.

Posted by Industrial-Manufacturing at 01:58 AM | Comments (0)

Fast Radios Introduces RoIP: Extending Two-Way Radio Range Thousands of Miles

Fast Radios, a leader in the commercial two-way radio industry, introduces 2 Way Radios over Internet (RoIP). This new technology allows users to talk via two way radios to locations ten miles, hundreds of miles or even thousands of miles away!

Naples, Florida (PRWEB) October 8, 2008 -- Fast Radios, a leader in the commercial two-way radio industry, introduces 2-way radios over internet (RoIP) which allows users to talk via portable two way radios to locations ten miles, hundreds of miles or even thousands of miles away!

"Your imagination is the only limit to how this incredible new technology in two-way radios can help you boost productivity, improve safety and increase efficiency!" according to Bill Richards, Fast Radios president. "Let's say you're in California. You can now use twoway radios to talk to someone in Florida. Users can now get inexpensive coast-to-coast coverage."

The system uses two-way radios and the internet to connect users at multiple locations. Distance and terrain between the locations are irrelevant.

"This incredible new technology is very easy to use and can be used with your existing two way radios," said Richards. "You get great sound quality, tremendous range and no monthly fees."

A Fast Radios two way radio over internet workstation consists of:

* a simple software program (CD included) loaded on your computer
* a RoIP box (about the size of a hockey puck)
* a desktop two-way radio base station and
* the connecting cables for the base radio, RoIP box and USB to your computer

Go to www.FastRadios.com for more information and pricing and leasing options. Fast Radios carries all major commercial two-way radio brands, including ICOM, Tekk, Vertex, Motorola, Kenwood, Jobcom, Relm and Ritron.

Other exclusive offers at Fast Radios:

* Free Trial on All Two-Way Radios: An opportunity to test new 2 way radio equipment at a location with no obligation to make a purchase.
* Free Comprehensive Radio Guide: "The Little Green Radio Book" is a comprehensive guide that includes everything you need to know to buy, operate and care for 2 way radios!

* Extended Four-Year Radio Warranty on all commercial 2 way radios purchased from Fast Radios

Fast Radios has earned the trust of their business customers by providing true long-term savings in two-way radios for business. Simple, reliable and affordable two-way radio equipment with complete one-on-one customer service is why Fast Radios is a leader in the commercial two way radio business.

Contact: Bill Richards, president
Fast Radios
Call: 800-691-3970
Visit: http://www.fastradios.com

Posted by Industrial-Manufacturing at 01:58 AM | Comments (0)

Dean Machinery Co. Unveils New Headquarters in South Kansas City

Dean Machinery Co.--a 53-year member of the Kansas City business community and recognized leader in Caterpillar equipment solutions--will open a new headquarters at 5701 East 87th Street on October 13.

Kansas City, Mo. (PRWEB) October 8, 2008 -- Dean Machinery Co.--a 53-year member of the Kansas City business community and recognized leader in Caterpillar equipment solutions--will open a new headquarters at 5701 East 87th Street on October 13.

The 25-acre campus features two major buildings that provide more than 180,000 square feet of increased service bays, parts capacity and added state-of-the-art resources. With more than three times the space of the old headquarters, these buildings enable Dean Machinery Co. to continue expanding its ability to provide sales, rental, parts and service to diverse business segments, according to Lori Dean, president, Dean Machinery Co.

"We made a significant commitment to build this facility," Dean said. "It's an important tool that was necessary to continue providing the best possible experience and most complete support resources to our customers."

The main shop, which encompasses 27,000 square feet, can serve up to 18 large machines at once. It has an all-season climate management system with advanced contamination control to provide a consistent, maintained environment that supports quicker, longer lasting service repairs while providing a comfortable year-round working environment for service technicians. Also included is a 45,000 square-foot warehouse for parts and inside component storage, providing significantly increased in-stock parts availability for more comprehensive support of customer needs. The main building also accommodates a 25,000 square-foot specialization shop, which features an enclosed clean room for longer-lasting hydraulic repairs and improved response times, minimizing contamination issues. A second building behind the main shop houses the track press, welding and fabrication areas, the machine shop and more. An additional 10 acres located just west of the current campus provides room for future growth.

The campus features the latest advances in sustainable technologies. The entire main facility is engineered as a closed environment, which means it's sealed from the outside climate for more efficient energy use. The building is designed to take maximum advantage of natural light and motion detectors control lighting in many areas to reduce electrical usage. All possible materials are recycled--including paper, cardboard and plastics. The campus takes advantage of an array of onsite renewable energy sources--including waste oil, which is used for heating--and every chemical and cleaner is environmentally friendly, down to the hand soap used in the shop and restrooms. Even the golf carts that help employees travel around the sizeable campus are electric instead of gas-powered.

Dean Machinery Co. employs more than 320 people at 11 locations in Missouri and Kansas, including the Kansas City metropolitan area, Chillicothe, Sedalia, St. Joseph, Sunrise Beach, Mo. and Elwood, Kan. About 170 employees will move to the new headquarters. The 31st Street Dean Rental Store remains at its current location.

"The new headquarters is a clear indication of our commitment to our customers, our employees, the industries we serve and the Kansas City community. It shows that we're on track and growing for the future," Dean said.

About Dean Machinery Co.
Founded by visionary businessman Lester M. Dean Sr. in 1955, Dean Machinery Co. provides complete Caterpillar equipment solutions--including sales of new equipment, rental equipment, parts and service--to the construction, agriculture, power systems and transportation markets. The company, which is part of the Dean Operations family of companies, is headquartered in Kansas City, Mo., and serves customers in 45 counties in eastern Kansas and western Missouri. For more, call 816-753-5300 or visit www.deancat.com.

Contact:
Joyce DeLay
Weyforth-Haas Marketing
913/901-2123
delayj@whmdelivers.com

To download images and additional information, please click on the link below, refresh the screen and then select file save as.

Sidebar: http://emailmarketing.weyforth-haas.com/pr/dean/DeanMachinerySidebar.pdf

Image 1:
http://emailmarketing.weyforth-haas.com/pr/dean/DSCN4332.JPG

Cutline Image 1: An aerial view of the new Dean Machinery Co. headquarters at 5701 E. 87th Street in Kansas City, Mo.

Image 2:
http://emailmarketing.weyforth-haas.com/pr/dean/DSCN4347.JPG

Cutline Image 2: The 27,000 sq. ft. main shop at Dean Machinery's new headquarters significantly expands customer repair capabilities.

Posted by Industrial-Manufacturing at 01:58 AM | Comments (0)

Clean Picks Up New Talent, and Gets a Move On

Clean Agency, a firm specializing in sustainable business strategy for companies with strong commitments to corporate social responsibility and the environment, has added new talent and relocated their offices to South Pasadena.

South Pasadena, CA (Vocus/PRWEB ) October 8, 2008 -- Clean Agency (http://www.cleanagency.com), a firm specializing in sustainable business strategy for companies with strong commitments to corporate social responsibility and the environment, has added new talent and relocated their offices to South Pasadena. Making their new nest at The Ostrich Farm in South Pasadena, Clean welcomes aboard team members Christopher Kahl and Candace Hodder.

With heightened awareness for social corporate responsibility and environment among big business, this summer has been no time to bury one's head in the sand, keeping Clean busy with new business in several segments of the consumer markets.

"Big business has woken up to the reality that green is not simply a trend, and if they are to sustain a healthy reputation, let alone profit, sustainability must be a part of their business model," said Seri McClendon, CEO & principal of Clean.

Clean, a sustainable business strategy firm providing services in everything from life cycle analysis to public relations, recently augmented staff to accommodate the additional workload by adding a talented strategist, a graduate from Art Center; and an accomplished account executive with a background in non-profit consulting.

Christopher Kahl, a graduate of Art Center College of Design in Pasadena joined Clean to head the strategy and problem-solving processes as Creative Director. Concentrating on systems with an eye towards expansion, Christopher orchestrates solutions for products and experiences that successfully balance commercial, sustainable and ethical concerns.

Working with both the WalMart Packaging Scorecard and the Sustainable Packaging Coaltion, Christopher has distilled Clean's sustainable packaging approach into proven results for clients such as Disney Global Toys, Mattel and Spin Master.

Prior to Clean, Christopher focused on identity and packaging solutions for such brands as MTV Networks, the acclaimed Japanese concept restaurant Katsuya by Starck, and the soon-to-launch SLS Hotels.

Candace Hodder, originally hailing from Toronto, Canada will be primarily responsible for account relations. Her strengths are in non-profit partnerships and planning.

Before joining Clean, Hodder was tasked with helping to launch the Urban Farming on the Food Chain project. A committed environmentalist, Candace spent the two years prior to her arrival in Los Angeles coordinating a national environmental event called the Great Canadian Shoreline Cleanup, a program that encourages Canadians to clean up beaches and waterways in their communities. She holds a Bachelors degree in Political Studies and a Masters degree in the relatively new field of Environmental Politics.

Clean is now located at 1010 Sycamore Avenue, Suite 306, South Pasadena, CA. (323) 255-9178.

About Clean
Established in 2001, and based in South Pasadena, CA, Clean is a non-traditional agency specializing in sustainable business strategies from supply chain assessment to integrated marketing. Clean develops customized solutions for nationally recognized brands and innovative entrepreneurial companies, enabling them to improve their economic and environmental performance at the same time.

Clean believes that sustainability is incremental, and that small changes can go a long way toward improving your company's triple bottom line. Clean is the new green. Visit www.cleanagency.com or call (323) 255-9178.

MEDIA CONTACT: Kathy Kniss, Kathy @ cleanagency.com, (323) 255-9178 x17

Posted by Industrial-Manufacturing at 01:58 AM | Comments (0)

TAH Industries' New Generation II Universal Cartridge Simplifies Packaging and Dispensing of Two-Component Materials

Unique design provides significant benefits to manufacturers in growing adhesives market

ROBBINSVILLE, N.J. (Business Wire EON/PRWEB ) October 8, 2008 -- TAH Industries, a subsidiary of Nordson Corporation (Nasdaq: NDSN), has announced the u-TAH® Generation II Universal Cartridge—a unique system for packaging and dispensing two-component materials like epoxies, urethanes and structural adhesives.

A recent report projects the global adhesives market to exceed $30 billion USD by 2010. Applications include automotive, aerospace, construction, electronics and industrial assembly. Helping drive this growth is the increasing use of adhesives as alternatives to mechanical fasteners like screws and rivets.

The Generation II Universal Cartridge features a unique in-line design that places one adhesive component behind the other, instead of the traditional side-by-side configuration. This allows the Universal Cartridge to be used with a standard caulking gun instead of the more expensive, product-specific dispensers required for side-by side cartridges.

For adhesive manufacturers, the ability to introduce new products in a package that can be used with an inexpensive, readily available application tool can help facilitate market acceptance and gain market share. Other benefits include:

* Maintains correct ratio between adhesive components to ensure performance and bond strength
* Preassembled and 100% factory tested for trouble-free filling
* Superior shelf life
* Eco-friendly design minimizes waste
* Easily resealed to preserve unused material

TAH Industries is a wholly owned subsidiary of Nordson Corporation, and a leading manufacturer of motionless mixer dispensing systems for two-component adhesives and sealants. TAH Industries specializes in the design and production of disposable plastic mixers and cartridge dispensing systems, meter mix dispense valves and accessories. Their products are used in the dental, construction, automotive, life science, food, DIY, marine and aerospace industries.

Nordson Corporation is one of the world’s leading producers of precision dispensing equipment that applies adhesives, sealants and coatings to a broad range of consumer and industrial products during manufacturing operations. The company also manufactures equipment used in the testing and inspection of electronic components as well as technology-based systems for curing and surface treatment processes. Headquartered in Westlake, Ohio, Nordson has more than 4,100 employees worldwide, and direct operations and sales support offices in 34 countries.

Posted by Industrial-Manufacturing at 01:57 AM | Comments (0)

Cygne Designs, Inc. Announces Resignation of Chairman of the Board of Directors of the Company

Cygne Designs, Inc. today announced the resignation of Bernard Manuel from all positions with the Company and its subsidiaries and affiliates

New York, New York (PRWEB) October 8, 2008 -- Cygne Designs, Inc. (CYDS.PS) today announced the resignation of Bernard Manuel from all positions with the Company and its subsidiaries and affiliates, including his position as Chairman of the Board of the Company and as a member of its Board of Directors. Mr. Manuel’s resignation was not the result of any disagreement with the Company or its management.

Cygne Designs, Inc. is a designer, merchandiser, manufacturer and distributor of branded and private label women’s denim, casual and career apparel with sales to retailers located in the United States.

Statements contained in this press release, which are not historical facts, are forward-looking statements as that term is defined in the Private Securities Litigation Reform Act of 1995. All forward-looking statements are subject to risks and uncertainties, which could cause actual results to differ from those projected. Such risks and uncertainties are discussed more fully in the Company’s Annual Report on Form 10-K for the year ended January 31, 2008 and the Company’s other filings with the Securities and Exchange Commission.

Cygne Designs, Inc.
Jay Furrow, CEO
(212) 997-7767, ext. 242
info@cyds.com

Posted by Industrial-Manufacturing at 01:55 AM | Comments (0)

Footwear Forced To Stretch For Safety

A leading UK footwear distributor, William Lamb Footwear is using a Mecmesin force testing system to ensure footwear, its components and any embellishments pass stringent quality standards set by their end-customers.

Slinfold, UK (PRWEB) October 8, 2008 -- A leading UK footwear distributor, William Lamb Footwear is using a Mecmesin force testing system to ensure footwear, its components and any embellishments pass stringent quality standards set by their end-customers.

The company uses a MultiTest 1-x system together with a specially designed sandal test fixture to perform routine checks on shoe straps, flip-flop toe posts, sequins and other attachments. This fixture ensures each sample is firmly secured to allow accurate and repeatable tension tests to be carried out using BS and SATRA test methods. This includes holding a tensioned attachment on a child's shoe for 90 seconds to guarantee compliance with BS EN 71 Part 1 for child safety.

Requiring a number of different tests, the MultiTest 1-x, combined with a range of textile testing fixtures, formed a suitable solution as it enables William Lamb Footwear to pre-program and store up to 30 test routines. The console interface provides easy selection of programs and one click activation to begin testing, saving time and resource.

Tony Freeman, Director of William Lamb Footwear, comments, "We use the MultiTest-x regularly, approximately 40 hours every week. It continues to be reliable and saves us money by enabling us to do tests in-house. Mecmesin were able to offer advice regarding fixtures and designed an ideal solution for our testing needs, which remained competitively priced."

For further information contact Mecmesin on +44 (0) 1403 799979, or email sales @ mecmesin.com.

(KD. 02, Oct, 08)

Posted by Industrial-Manufacturing at 01:55 AM | Comments (0)

Industrial Nanotech Announces Results of September Meetings In NY and NJ With Petrobras, One of the World's Top Ten Energy Producers

Industrial Nanotech, Inc. (Pink Sheets:INTK), an emerging global leader in nanotechnology, today announced the results of the recent visit by a team from Petrobras' headquarters. Petroleo Brasileiro SA, or Petrobras, is the Brazilian oil & gas producer and one of the world's largest oil and gas companies. The team from Petrobras spent ten days with members of Industrial Nanotech's research scientists, business development team, and management at the Company's laboratory in Union, NJ and in meetings in New York, NY from September 8 - 17.

Naples, Fla. (PRWEB) October 8, 2008 -- Industrial Nanotech, Inc. (Pink Sheets:INTK), an emerging global leader in nanotechnology, today announced the results of the recent visit by a team from Petrobras' headquarters. Petroleo Brasileiro SA, or Petrobras, is the Brazilian oil & gas producer and one of the world's largest oil and gas companies. The team from Petrobras spent ten days with members of Industrial Nanotech's research scientists, business development team, and management at the Company's laboratory in Union, NJ and in meetings in New York, NY from September 8 - 17. The meetings were originally scheduled to run from September 8 - 12, but were extended to Sept 17th at the request of the Petrobras team.

"The team from Petrobras has informed us that they have made the decision to use our new Nansulate EPX product instead of the previously chosen Nansulate HH product," stated Stuart Burchill, CEO/CTO of Industrial Nanotech, Inc. "In fact, they were so astonished by the multiple performance capabilities of EPX that they were taking video clips of the demonstrations at our laboratory to email to associates in different departments back at their headquarters in Rio de Janeiro, Brazil."

The Company received written confirmation this past Friday from Petrobras of the new EPX product volume estimate and timeline. No projects will be beginning until early 2009 due to the internal certification process of EPX necessary prior to purchase. New projects are being added. The new estimated total value of the projects has increased from approximately 5.8 million dollars US to over 20 million dollars US.

Mr. Burchill continues, "Obviously, the additional delay in a deal we have been working on for years, caused by in part by their decision to switch from using Nansulate HH to Nansulate EPX, is disappointing in terms of our near term revenue objectives, but we all recognize that delays in major oil and gas infrastructure construction projects are not unusual and the increase in project numbers and size is reassuring in terms of the scale of our future in the oil and gas industry in general. We are also currently in early stage discussions about the use of our new Nansulate EPX with BP, Exxon Mobil, ConocoPhillips, and Bredero Shaw... a global leader in industrial pipe coating with more than twenty seven pipe coating facilities on six continents. This is a time consuming and tedious process, but we believe the results will be worth the patience and effort required to gain entry into this lucrative market sector and getting it right is the critical component to our long term success with these major international oil and gas companies."

Petrobras, short for Petroleo Brasileiro S.A., is a government-owned Brazilian oil company and one of the world's largest oil companies. The company controls oil and power industries assets and related business activities in 16 nations throughout Africa, North America, South America and Asia. According to Petrobras President Sergio Gabrielli, their recent major offshore oil discovery, including the Tupi field, would give Brazil the world's eighth-largest oil and gas reserves.

About Nansulate(R)
Nansulate(R) is the Company's patented product line of specialty coatings containing a nanotechnology based material, and which are well-documented to provide the combined performance qualities of thermal insulation, corrosion prevention, resistance to mold growth, lead encapsulation, chemical resistance, and fire resistance in an environmentally safe, water-based, coating formulation. The Nansulate(R) Product Line includes both industrial and residential coatings.

Nansulate EPX is a water based epoxy system which has an industry high thermal insulation capability combined with exceptional fire resistance and excellent chemical and corrosion resistance. Nansulate EPX also provides the ability to be applied from one eighth inch thick to several inches thick, a rapid cure time, durability in severe service environments, and is a strong, very light weight, easy-to-apply material.

About Industrial Nanotech Inc.
Industrial Nanotech Inc. is quickly emerging as a global nanoscience solutions and research leader. The Company develops and commercializes new and innovative applications for nanotechnology. Additional information about the Company and its products can be found at their websites, (http://www.industrial-nanotech.com) and (http://www.nansulate.com).

Safe Harbor Statement
Safe Harbor Statement under the Private Securities Litigation Reform Act of 1995: This release includes forward-looking statements made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 that involve risks and uncertainties including, but not limited to, the impact of competitive products, the ability to meet customer demand, the ability to manage growth, acquisitions of technology, equipment, or human resources, the effect of economic and business conditions, and the ability to attract and retain skilled personnel. The Company is not obligated to revise or update any forward-looking statements in order to reflect events or circumstances that may arise after the date of this release.
SOURCE: Industrial Nanotech, Inc.
CONTACT: For Industrial Nanotech Inc., Naples
Investor Relations:
The Cervelle Group, LLC
Rob Karbowsky, 407-475-9966 ext. 227.
rob @ thecervellegroup.com
or
Media Inquiries:
The Cervelle Group, LLC
Tina Kuhn, 407-475-9966
tina @ thecervellegroup.com

Posted by Industrial-Manufacturing at 01:55 AM | Comments (0)

Houston Courier Service Launches One-Click Ordering Feature

Innovation is a requirement to thrive in the business world and the delivery industry is no exception. Hot Shot Delivery, a Houston courier service, is constantly recognized as a ground breaking leader in the delivery industry and, in keeping with their reputation, has announced the release of a one-click ordering system by SmartLogin®

Houston, TX (PRWEB) October 8, 2008 -- Innovation is a requirement to thrive in the business world and the delivery industry is no exception. Hot Shot Delivery, a Houston courier service, is constantly recognized as a ground breaking leader in the delivery industry and, in keeping with their reputation, has announced the release of a one-click ordering system by SmartLogin®

For 30 years, Hot Shot Delivery has utilized the latest technology to keep the customer experience rich and costs low. While working with a delivery agent in the DFW area, Hot Shot Delivery was introduced to the SmartLogin® technology and felt that it would benefit their courier customers greatly.

The Hot Shot SmartLogin® is a one-click icon with an automatic login component. This icon is placed on a user's PC desktop and web browser toolbar. Resembling the Hot Shot logo, the icon has increased security measures while still allowing immediate entry into the Hot Shot Delivery order entry system. This new feature will allow customers to submit delivery orders in seconds, print delivery tickets & labels on the fly, track courier orders in real time and run various cost reports specific to your preference for any date range.

"Not only will our clients experience easier and faster ordering, tracking and reporting services," says Eric Donaldson, President, Hot Shot Delivery. "But, by deploying web technology we are also operating more efficiently at the administrative level. This allows us to put additional focus on customer satisfaction and new technology."

This new package delivery feature from Hot Shot delivery is available immediately. Call Hot Shot Delivery today to get more information on obtaining the SmartLogin® service for your computer. Additional information regarding Hot Shot Delivery can be found by calling (713) 869-7575 or by visiting www.hotshot-delivery.com.

About Hot Shot Delivery:
Hot Shot Delivery is a full service delivery and logistics company, serving clients of all sizes and across all industries. Founded in 1978, Hot Shot Delivery Inc. has established a reputation for reliability and consistent on time performance which has enabled steady growth while retaining a diverse client portfolio. Additional information can be found by calling (713) 869-7575 or visiting the company website at www.hotshot-delivery.com.

About SmartIcon Technologies LLC:
SmartIcon Technologies LLC is a technology firm whose online order success is widely known in the courier industry. A pioneer in Desktop AutoLogin software, SmartIcon Technologies LLC is committed to providing clients with measurable results. In addition to offering SmartLogin®, SmartIcon Technologies LLC takes an active approach ensuring that proven strategies are put in to place for each client to realize all the savings possible.

Posted by Industrial-Manufacturing at 01:55 AM | Comments (0)

Defence Doors Ltd Secures Major Works Contract on Carlisle Flood Defence Scheme

UK based company, Defence Doors Ltd (http://www.defencedoors.com), has secured a major contract for the design, manufacture and installation of steel flood gates as part of the Carlisle Flood Defence Scheme in Cumbria. The work is expected to start in October 2008 and run for 12 months. The project will comprise single and double leaf flood gate units for pedestrian and vehicular access through flood defence walls. The flood defence system will feature a new anti-tamper latching system.

Driffield, UK (PRWEB) October 8, 2008 -- UK based company, Defence Doors Ltd http://www.defencedoors.com , has secured a major contract for the design, manufacture and installation of steel flood gates as part of the Carlisle Flood Defence Scheme in Cumbria. The work is expected to start in October 2008 and run for 12 months. The project will comprise single and double leaf flood gate units for pedestrian and vehicular access through flood defence walls. The flood defence system will feature a new anti-tamper latching system.

Having supplied flood gates to the Environment Agency on the Carlisle Flood Alleviation Scheme 2008 Defence Doors Ltd has secured the contract for the design, manufacture and installation of a series of steel flood gates to be used in the major works on the Carlisle flood defence scheme. Working closely with the Environment Agency for over 15 years managing director of Defence Doors Ltd Mr Shane Turrell designed and developed a range of "standard floodgates" both single and double leaf units for pedestrian and vehicular for access through flood defence walls.

Carlisle has a significant history of flooding with serious events since 1963 up to the most recent and most publicised flood event 2005 when 1844 properties were flooded power and telephone connections were disrupted and roads and rail links were closed. The Environment Agency carried out risk assessments identifying the main areas requiring flood protection from The Eden and Petteril, Caldew and Low Crosby. Complex design was undertaken to develop a series flood defences with the construction of new embankments and flood defence walls incorporating steel flood gates.

Defence Doors standard designs have now progressed to forth generation floodgates with additional features in 2008 for the latest Environment Agency requirements. In areas of heavy traffic the thresholds are now installed as flat stainless steel plates removing potential trip hazards for pedestrians with no requirement to raise or drop the base seal. The steelwork is protected by a high build epoxy paint system to ensure long life of the gate

A new latching system with copyright protection has been designed and built by Defence Doors Ltd enabling the operation of single leaf gates up to six meters in length to be opened and closed in less then two minutes with the operation achievable by a single person in normal weather conditions with very little effort and using a simple tool that remains securely stored inside the gate leaf.

MD Shane Turrell said, "Our new anti tamper latching system is securely stored out of sight in both the open and closed positions preventing unauthorised access or opening of the gate leaf once it has been deployed. This system adds great security benefits to an already impressive range of products." The latch mechanism has an added option for remote monitoring with telemetry sensors built into the latch housing not only identifying the gate is closed but also the gate has been fully latched and the seals are in a compressed state.

With these additions now used as our standard product for most applications floodgates can now be produced in a fast track programme from order to site including the paint system in as little as 4-6 weeks.

Defence Doors Ltd is a registered manufacturer of flood defence products supplying direct to the Environment Agency - Supplier No ref 19667 and further orders have been secured to supply the Agency for floodgates 3 other sites in the North West, progress and images will be posted on the website as the contract progresses - http://www.defencedoors.com

For more information on Flood Defence Systems, or other services that Defence Doors provide, including Prison Doors, Blast Doors, Airtight Doors and other steel fabrications, please contact: Shane Turrell, Defence Doors Ltd, Fairways, Thornholme, Driffield, East Yorkshire, UK. YO25 4NN.
http://www.defencedoors.com
Tel: +44 (0) 1262 490 219
Email: sales@defencedoors.com

Posted by Industrial-Manufacturing at 01:55 AM | Comments (0)

Pembroke Consulting to Examine How Financial Crisis Affects Wholesale Distribution in 2009 Economic Forecast

Pembroke Consulting today announced a new webcast, The 2009 Economic Forecast for Wholesale Distribution, to help wholesaler-distributors plan in this uncertain economy. This 90-minute live webcast will take place on November 13, 2008. Online registration is available at http://www.mdm.com/2009forecast.

Philadelphia, PA (PRWEB) October 8, 2008 -- Pembroke Consulting today announced a new webcast, The 2009 Economic Forecast for Wholesale Distribution, to help wholesaler-distributors plan in this uncertain economy. This 90-minute live webcast will take place on November 13, 2008. Online registration is available at http://www.mdm.com/2009forecast.

The webcast will feature Adam J. Fein, Ph.D., one of the country’s foremost experts on distribution channel economics. Dr. Fein will explain the impact of the current financial crisis on the wholesale distribution industry, discuss how economic trends are shaping up for wholesaler-distributors in 2009, and provide detailed quantitative forecasts for each of the 19 major wholesale distribution sectors. All attendees will receive an exclusive written report with all data and forecasts.

“Revenues of wholesaler-distributors grew by only 1.5 percent in the first half of 2008 after adjusting for price inflation,” said Dr. Fein. “The information and data in this webcast will help wholesale distribution executives develop effective strategies for surviving the economic slowdown and credit crunch.”

This event is being underwritten in part by IBM Corporation and produced by Modern Distribution Management. An archived recording of the event will be available through the end of 2008 at http://www.mdm.com/2009forecast.

“This event will help wholesale distribution executives refine their 2009 business plans to help address the challenging economic times which are upon us,” said Mike Briglia, Vice President - Wholesale Distribution/CPG Industry at IBM. “We encourage wholesaler-distributors to bring their entire management team to this important webcast.”

Pembroke Consulting is a management advisory and business research firm that helps executives to improve strategic and tactical decision making. To learn more about the firm and its services, visit http://www.PembrokeConsulting.com.

Adam J. Fein
Pembroke Consulting, Inc.
215-523-5700
afein @ pembrokeconsulting.com
http://www.pembrokeconsulting.com

Posted by Industrial-Manufacturing at 01:52 AM | Comments (0)

Master Chemical Introduces TRIM® E906, A Premium Long Life, Low Foam Emulsion

Master Chemical Corporation announces the introduction of a new premium low foaming emulsion, TRIM® E906. This low foaming formula delivers consistent machining and grinding performance on a wide range of materials and applications. E906 provides a much longer operational life without the need for costly additives than competitive fluids. E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling.

Perrysburg, Ohio (PRWEB) October 8, 2008 -- Master Chemical Corporation announces the introduction of a new premium low foaming emulsion, TRIM® E906. This low foaming formula delivers consistent machining and grinding performance on a wide range of materials and applications. "E906 provides the newest available technology into our proven emulsion-based cutting platform," stated Global Marketing Manager, David A. Barned. The stable and predictable performance of E906 makes it a first choice for manufacturers doing work for industries as diverse as aerospace, automotive, energy, and specialty job shops. Using E906 on the newest CNC machine tools that utilize high-pressure, high-volume, through-the-tool coolant systems will help plants maximize their productivity.

E906 provides a much longer operational life without the need for costly additives than competitive fluids. E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling. "In high-speed turning and milling, E906 has the right balance of cooling and lubrication to provide great tool life and surface finishes because it has a tight emulsion which reduces carryoff and gets the fluid to the point of cut," stated Mr. Barned. E906 also protects machine tool surfaces while preventing sticky ways, chucks, tool holders, and fixtures. E906 does not contain or test positive for phenol, is easily removed with water, working solution, or TRIM® CLEAN aqueous cleaners. E906 is easy to recycle or dispose of with conventional techniques and equipment.

About Master Chemical Corporation
Master Chemical Corporation was founded on November 13, 1951. Since then, working closely with the worldwide metalworking community, Master Chemical Corporation has developed and marketed a full line of specialty cutting and grinding fluids, cutting oils, concentrated washing and cleaning compounds, and rust preventives all under the TRIM Brand trademark. These products are both environmentally sound and when used in conjunction with Master Chemical's XYBEX® Coolant Recycling and Filtration Systems, are the most durable and stable products available anywhere today. Master Chemical has always been committed to the safety of the people who use our products, the protection of our planet and the environment we live in, and the overall impact on our customers' profitability. Master Chemical serves customers globally. For further information, please contact a local Distributor near you http://www.2trim.us/distributors.php, call us at 419-874-7902, or visit our website at www.masterchemical.com.

Photo: www.2trim.us/2008-09-19p.php (300dpi)
Photo caption: Erlenmeyer flask of TRIM® E906.

Posted by Industrial-Manufacturing at 01:52 AM | Comments (0)

CPDA'S Dr. Ken Versprille to Participate in CAD/CAE Model Clean-Up Webinar

CPDA'S Dr. Ken Versprille to Participate in CAD/CAE Model Clean-Up Webinar on Wednesday, October 15, 2008 at 1:00 PM Eastern.

Stamford, CT (PRWEB) October 8, 2008 -- Collaborative Product Development Associates (CPDA), a provider of critical analyses for PLM decisions, announces that Dr. Ken Versprille, PLM Research Director for Design Creation and Validation, will participate in a live webinar on CAD/CAE Model Clean-Up. The webinar, "CAD/CAE Model Clean-Up: Reduce Design, Analyze, and Revise Cycles," is sponsored by Anark Corporation and will take place on Wednesday, October 15, 2008 at 1:00 PM Eastern.

Ken will join Anark's Senior Vice President of Product Development, Scott Collins, to discuss new research and survey results related to the problems associated with preparing CAD geometry for CAE applications, and the critical pain-points and shortcomings of current solutions for CAD/CAE integration. The webinar will show how improving the efficiency of product design, analyze, and revise cycles can reduce time-to-market, yielding significant competitive advantage for manufacturers.

For more information or to register for this complimentary webinar please visit: http://www.anark.com/events/event_center.asp?utm_source=cpda&utm_medium=webinarpr&utm_content=link&utm_campaign=webinar1

About CPDA: Collaborative Product Development Associates (CPDA) is a provider of critical analyses for PLM decisions. CPDA offers the latest in-depth, objective information for assessing technology and business goals. Coordinated by a group of experienced analysts, its cohesive suite of collaborative research programs leverages the efforts of top software designers and leading-edge users. CPDA's differentiation is its specific, deep, and pragmatic approach to the market, and a hands-on understanding of the technology required to drive successful implementations. CPDA's collaborative research programs include Design Creation and Validation, Design/Simulation Council, PLM-Integration/Product Definition, and Product Value Management.

About Anark: Anark Corporation provides powerful enterprise software and solutions to manufacturing organizations that need to cost effectively utilize their 3D CAD data and other graphics assets for visualization, simulation, CAE, and supply-chain data exchange.

Anark helps market leaders such as Boeing, Cessna, Pratt & Whitney, Lockheed Martin, and NVIDIA unlock the potential of their 3D data assets to save money, accelerate product development, and to collaborate and communicate more effectively and securely.

Contact:
Cheryl Peck
Cheryl.peck@cpd-associates.com
203-969-2732

Posted by Industrial-Manufacturing at 01:52 AM | Comments (0)

Call for Applications for Standards Committee for BSR/SCS-002-200x: "Type III Life-Cycle Impact Profile Declarations for Products and Services"

Leonardo Academy invites all interested stakeholders to submit applications to participate on the Standards Committee for BSR/SCS-002-200x, "Type III Life-Cycle Impact Profile Declarations for Products and Services."

Madison, WI (PRWEB) October 8, 2008 -- Leonardo Academy invites all interested stakeholders to submit applications to participate on the Standards Committee for BSR/SCS-002-200x, "Type III Life-Cycle Impact Profile Declarations for Products and Services."

As announced in the PINS filing, posted in ANSI Standards Action on November 9, 2007, a Standards Committee will be formed to develop a standard intended to:
"Specif[y the life-cycle impact assessment (LCIA) methods, scope, metrics and format for declarations. This standard will comply with the requirements of ISO 14044 and ASTM draft standard E06.71.10. This standard is not intended to establish minimum environmental performance requirements or define a preference for one technology relative to another. This standard is intended to develop a uniform and standardized format for properly reporting the environmental life-cycle impacts of any system studied. The standard explicitly excludes weighting factors and interpretation of LCIA results."

The Project Need was described as follows:
"To have verifiable environmental performance data and information in a consistent format, based on a full life-cycle impact assessment."

Industry stakeholders were identified as including: "service industries and their clients, building industry professionals, building owners and operators." Regulators, academicians, environmental representatives, and other interested stakeholders are also invited apply.

How to Apply
Interested parties can download the application form at http://www.leonardoacademy.org/Projects/LCIADecStdDevelopment.html.
Applications should be submitted to the Leonardo Academy--a neutral third-party ANSI-accredited organization dedicated to advancing sustainability through the competitive market--by Monday, November 3, 2008. Notification of selection to committee will be completed by Friday, November 7, 2008. The first standards committee meeting will take place by teleconference on Friday, November 14, 2008.

For Additional Information Contact Leonardo Academy:
Tel: (608) 280-0255
Email: amanda@leonardoacademy.org

Posted by Industrial-Manufacturing at 01:52 AM | Comments (0)

New On-Demand Print Center From ALOM Heps Businesses Speed Customer Service

Businesses can now print high-quality materials on demand and ship them to customers within minutes, using a new digital print center opened by ALOM.

Fremont, CA (PRWEB) October 8, 2008 -- Businesses can now print high-quality materials on demand and ship them to customers within minutes, using a new digital print center opened by ALOM.

Based in Fremont, California, ALOM is a contract packaging, fulfillment and supply chain management provider serving customers from 14 locations around the world. Its advanced fulfillment systems now include an integrated state-of-the-art HP Indigo press 5500, known for delivering offset look and feel as well as true photo quality.

As a result, end-users can now select items that they'd like printed from an easy-to-use interface integrated into ALOM's ecommerce solutions--right from a customer shopping cart. Printing is completed and the documents are shipped within minutes.

The solution is especially economical for businesses with multiple pieces of collateral that are rarely printed, but where print quality is important.

ALOM's customers can also place orders for short-run collateral to replenish inventory. Replenishment of printed matter can be done immediately, and the risk of being out-of-stock has virtually been eliminated. In addition, shorter production runs become economical.

"I am excited that we are adding a more sustainable print option for our customers," says ALOM's CEO, Hannah Kain. "With shorter print runs, customers reduce the risk of printing copies that will never be used and have to be scrapped. This helps our customers run greener, more cost-efficient operations."

Variable print runs can be produced in real-time for targeted marketing campaigns, training materials and personalized information.

The HP Indigo press 5500 is a new, advanced, digital press. The 4-color ink press prints up to 1,200 dots per inch (dpi). Designed for the production of marketing collateral, direct mail, photo specialty products, books and manuals--including higher-volume production in centrally controlled, multiple-press environments--the solution delivers the offset look and feel afforded by HP Indigo technology and liquid HP ElectroInk.

Capable of printing over 1.5 million color pages or more than five million monochrome pages per month, the HP Indigo press 5500 is a truly universal production device. It's also the one true digital offset press that combines the look and feel of traditional offset with genuine photo quality.

Prepress is done in-house using a multi-platform environment.

The Print On Demand (POD facility) is managed by Mark Pensa, ALOM's new print manager. Pensa has more than 20 years of printing industry experience and recently ran the printing company Merchant Mailing.

About ALOM
ALOM is a Fremont, California-based supply chain management provider that has been ISO-certified since 1998. Services include materials and inventory management, logistics, assembly, light manufacturing, fulfillment, and reverse logistics from 14 locations across North America, Asia and Europe.

Posted by Industrial-Manufacturing at 01:52 AM | Comments (0)

Teen Launches New Multicultural Girls Line for GottaBCute Apparel and Accessories

Cute and trendy clothing & accessories line expands by keeping it in the family and keeping it positive.

Fontana, CA (PRWEB) October 7, 2008 -- When Zana Jackson, Founder/Owner, envisioned the concept for GottaBCute (TM) almost two years ago, she never imagined it would take off like it has. GottaBCute specializes in screen printed, blinged out tees, and unique accessories for infant through junior/adult sizes. "We've tried to change our concept to sell to kids and teens but adults love GottaBCute shirts and there aren't many options available for Mothers and Daughters or siblings to dress alike."

GottaBCute has recently expanded the accessories line to back packs, lip balms, shoe laces, lanyards, lighted whistle key chains (for safety), buttons, pencils, bracelets, temporary tattoos, and stickers. There are several different logo designs offered and something to fit everyone's style and budget. Prices range from $1 up to $50. No matter what background, economic status, or ethnicity, being cute is universal for girls of all ages.

More recently, the founder's daughter Zanae' Jackson, a 13-year-old, 8th grade student at Heritage Intermediate School, has added a new line called GBC Girls to GottaBCute as well as models for the company. "Zanae' loves to draw and we have always promised to put her design on a t-shirt so when she came up with the idea to draw multicultural girls from around the world (African-American, Indian, Caucasian, Asian, and Hispanic) with positive messages, we had to do well on our promise." The first GBC Girl in the line looks like Zanae', a beautiful, stylish, little brown girl. The acronym for GBC is Gorgeous, Brilliant, and Confident. The shirts have become so popular that we have already sold out and have orders for more. Parents are looking for something special for their daughters and GottaBCute products offer the uniqueness.

GottaBCute, also known as GBC, started off as the name of a company for an invention created back in 2000. It wasn't until 2006, when Johnnie and Zana Jackson, Owners decided to create a logo and put it on T-shirts. "I was so tired of seeing girls wearing T-shirts with negative messages, I wanted to provide a more positive option". Girls can wear a confident message, feel good about themselves, and be stylish at the same time. GottaBCute is not just about being cute though; it's about strength, self worth, quality, and being positive in ones thoughts, attitude, and self image. It is also about getting the message across to teach others that girls do not have to show their body parts to be cute or in style. "Girls can love and be themselves and others will respect them for who they are which is the message I teach my 2 daughters (Zaylin Jackson, 7 ½ years old, company model)."

GottaBCute products are currently sold online at www.gottabcute.com, by hosting a GBC party, at trade shows and local community events, as well as Da Head Qtrs. (Urban) Store in Los Angeles. Also, visit www.myspace.com/gottabcute. GottaBCute is seeking girlie boutiques and department stores to carry its line of products. Fundraisers are offered for organizations like Young Women of Empowerment which teaches girls to better themselves.

Future plans? Growing into a brand called GottaB (TM)... because there are so many positive things you've GottaB. GottaB... will include a new line called GottaBFly (TM) for stylish guys created by Eric Williams, a 20 year old College Art Student and Founder's nephew. The GBF line will be released for the holidays.

But for now, There's only one kind of Cute, GottaBCute.

Posted by Industrial-Manufacturing at 01:48 AM | Comments (0)

Plant Closure, Demolition and Remediation Experts Launch Redevelopment Campaign

Restoration Environmental Contractors (REC), experts in environmental remediation, demolition, disaster recovery, plant closures and industrial site remediation, has launched a plan to help businesses strengthen their competitive positions after the decision has been made to close plants, and further, promote a positive corporate image through retraining and employing the local workforce.

Toronto, ON (PRWEB) October 7, 2008 -- Restoration Environmental Contractors (REC), www.environmentalhazards.com, experts in demolition, disaster recovery, plant closures and industrial site remediation, is proud to announce the launch of a redevelopment strategy and anti-recession campaign, designed to help businesses who have decided to shut down their plants, sell off assets, to recover idle property, save on taxes, and re-train and employ the former local workforce while redeveloping old sites.

"The number of plants closing throughout Ontario and the U.S. is on the rise. Businesses see this as a necessary move in order to remain competitive through tough economic times," says Don Bremner, CEO and President of Restoration Environmental Contractors. "Many corporations are writing off old, inefficient or obsolete plants, old technology assets and capital project spending that has been determined to be of no further value. Corporate expectations are that these actions will reduce overhead and ultimately produce positive income. Nevertheless, companies will still need to pay industrial building taxes, even though the facility is shut down. Further, is the effect on families and the community. The shutdown of hundreds of manufacturing facilities has meant the complete loss of hundreds of thousands jobs. All of this goes into creating a tremendously negative impression about the corporation."

REC's program can help. Its new redevelopment strategy will allow for job creation and retraining, for this workforce to help with the environmental remediation, decommissioning and/or demolition of the site, thereby minimizing the negative consequences of necessary business decisions. The result is a win-win for both the local economy and the parent company, which ends up with a much more positive corporate image.

Since 1989, REC has successfully completed over 9,000 environmental remediation and demolition projects throughout Canada, specializing in industrial plant cleaning, decommissioning closures, site remediation and disaster recovery in the industrial, commercial, government, and institutional sectors.

REC senior project management and site supervisory team has accumulated more than one million hours of on-site environmental remediation contracting experience in the removal of all hazardous materials, including; asbestos, mould, lead dust, PCBs, heavy metals, plant decommissioning, site decontamination, soil remediation, and demolition.

REC is a full-service emergency response contractor committed to excellence in health and safety whose record is impeccable. REC's strength lies with its highly trained people, and has over 100 unionized professionals on call to address a variety of needs.

REC's reputation has been established by the quality of the services it provides and by relationships built on trust. This philosophy has become the cornerstone of its business.

Because each environmental and demolition project is unique, REC assembles a specific team of professionals that will bring the desired solutions to the project. REC has the vision and the experience to deliver quality environmental and demolition services at a competitive price to meet every business need.

REC provides remediation options tailor-made for each project from the start, whether they are emergency service calls, small maintenance calls, or multi-million dollar demolition and environmental abatement projects. REC believes that the process should be simple, so the company creates options that offer sound environmental solutions.

REC can meet the needs of businesses planning a plant closure, an abatement, environmental, demolition or restoration project. REC can help businesses prepare for a disaster or emergency. REC can also provide on-call Emergency Response services.

REC services include:

* Environmental Abatement and Remediation Contractors
* Demolition; Deconstruction, Asset Recovery, Equipment Dismantling
* Hazardous Materials Removal; Asbestos, Mould, PCBs, Lead
* Plant Closures: Industrial Plant Decommissioning/Cleaning of Heavy Metals
* Disaster Recovery: Fire, Sewage Backup, Flood, Water, Wind Damage Restoration
* Emergency Response Service - Bonded/Police approved Staff for Security

REC is a turnkey, full-service, emergency response contractor. As a recognized leader in the industry, REC can provide up to $20 million dollars, 100% Performance Bond capacity and up to $10 million in environmental/pollution general liability insurance coverage for every project. REC has worked for a number of government agencies and other corporate clients where a high level of security or police clearance (CPIC) is required and REC is an approved NATO Department of National Defense Contractor. For more information on REC's services, please visit www.recdemolition.com, www.environmentalhazards.com, www.recdisaster.com or www.soilremediation.com.

Contact:
Don Bremner
CEO, President
416-717-0541
rec@restorationenvironmental.com

Restoration Environmental Contractors - REC Demolition - REC Disaster Recovery - REC Fire Water Flood Damage Restoration
P.O. Box 746
10 Stalwart Industrial Drive, Unit 5
Gormley, Ontario L0H 1G0

Head Office: Telephone (905) 888-0066
Fax (905) 888-0071
Toronto: (416)-543-4719
Calgary (403) 369-4500
Brockville (866) 619-0329

Vancouver (604) 861-8400
Tampa (727) 866-7606
1-800-894-4924 (Canada/USA)

Posted by Industrial-Manufacturing at 01:48 AM | Comments (0)

Millenia Wall Solutions® Enters into Dealer Agreement with RidgeRock® Retaining Walls Inc.

RidgeRock is the exclusive dealer for Millenia's Retaining Wall System in North and South Carolina and southern Virginia.

Minneapolis, MN and Charlotte, NC (PRWEB) October 7, 2008 -- Millenia Wall Solutions, developer of the Millenia® Retaining Wall System, announced that it has named RidgeRock Retaining Walls Inc. as its exclusive dealer in North and South Carolina and southern Virginia. Millenia is transforming the segmental retaining wall (SRW) industry with its ingenious retaining wall system, the most advanced SRW technology available today. RidgeRock (Charlotte, N.C.), developer of the RidgeRock® Retaining Wall System, is now selling Millenia® Retaining Walls as a new option for contractors.

"Big changes in construction materials don't come along too often. Millenia has come up with the first major technological development in retaining walls in a very long time. By fulfilling the demand for high-end aesthetics and earth-friendly materials, Millenia establishes a new niche in the SRW product mix between concrete blocks and real stone," said James S. Martin, president, RidgeRock Retaining Walls Inc. "Millenia is becoming a design-specified material by architects and engineers -- particularly for walls that are prominent landscaping features. That's why we are offering the Millenia® system as an alternative to our concrete products."

"RidgeRock is well known for its commitment to meeting the design and engineering requirements of its contractor customers," said Paul Forsberg, president, Millenia Wall Solutions. "Jim Martin's decision to supplement his product line with our system signals that there is market demand for a new SRW alternative."

The Millenia® system sets the 21st century standard for the design and construction of segmental retaining walls:

SUPERIOR AESTHETICS: Millenia produces its wall products in 100 percent recycled, pre-consumer polymeric resins. "Millenia gets closer to the look of a real stone wall than any other material I've seen," said Martin. "With concrete, given the limitations of the material and inflexibility of the dry-cast process and machinery, you just can't get the detail that Millenia achieves." Millenia Wall Solutions takes precise impressions of natural stone faces and quarried stone from which it creates the molds used to produce its retaining wall faces and caps. Injection molding gets the pliable polymer material into all the details of the molds and captures the nuances of natural stone and quarried rock. Each style of the product is produced in five different patterns, so the faces of a Millenia® wall have natural variations.

BETTER FOR THE ENVIRONMENT: According to an independent Life Cycle Assessment (LCA), when used instead of concrete SRW blocks, Millenia® polymer wall units reduce total environmental impact by 55 percent (including a 65 percent decrease in greenhouse gas emissions). "The availability of up to eight LEED credits points is a strong selling point for Millenia," said Martin.

MORE ECONOMICAL TO SHIP AND INSTALL: Millenia® wall units weigh just five pounds per square foot. When installed with crushed stone fill, a Millenia® wall has all the weight and stability of any other SRW. Because of their much lighter weight, Millenia® wall units offer easy and fast installation that can double installer productivity. "Millenia's light weight reduces shipping and material handling costs," said Martin. "Plus, it's an ideal product for especially steep sites with difficult access."

About RidgeRock Retaining Walls Inc.:
Established in 1997 and headquartered in Charlotte, N.C., RidgeRock Retaining Walls Inc. is the developer, marketer, and patent holder of the RidgeRock Retaining Wall System. RidgeRock Retaining Walls Inc. was formed to meet the specific requirements of the rapidly growing market for engineered wall systems. RidgeRock's successful growth can be attributed to the company's interest in addressing all unique aesthetic design and installation requirements of designers, contractors, and owners. Additional information is available at www.ridge-rock.com or by calling 704.504.3358.

About Millenia Wall Solutions:
Headquartered in Minneapolis, Minn., Millenia Wall Solutions (www.milleniawalls.com) is setting the 21st century standard for the construction of segmental retaining walls by advancing the most significant innovation in the industry since the 1980s. Millenia has introduced an inventive, high-tech alternative to conventional building materials. Millenia is a member of the U.S. Green Building Council and GreenSpec-listed. Our retaining walls are eco-friendly and offer incomparable beauty, strength, stability and durability - achieved with lightweight, recycled polymeric resin materials that contractors can install easily, quickly and with less labor. The Weight is Over™. Ready to Build Intelligently®? Check out Millenia on our Web site. Then give us a call at 1.866.549.WALL (9255).

Millenia will exhibit its retaining wall system at the Greenbuild International Conference & Expo (booth #1769), November 19-21, 2008, Boston Convention & Exhibition Center, Boston, Mass. and at Hardscapes North America (booth #932), January 16-17, 2009, Cobb Galleria Center, Atlanta, Ga.

Posted by Industrial-Manufacturing at 01:48 AM | Comments (0)

Black is Beautiful: Geneva Watchmaker Alpina Expands Production of Its Bestseller Avalanche Extreme Regulator

High Demand for Alpina Geneva's BestSeller, the Avalanche Extreme Regulator

GENEVA (Business Wire EON/PRWEB ) October 7, 2008 -- With the continued success of the Alpina Full Black Avalanche Extreme Regulator, the Geneva Watchmaker Alpina increased its production capacity at its Manufacture in Plan-les-Ouates, Geneva. A new state of the art Atelier for the assembly of the calibre for the Full Black Avalanche Extreme Regulator was opened in May 2008. The new Alpina Atelier at its Manufacture in Geneva, measures 5000 square feet, offering an attractive working environment for around 12 employees in the sectors of movement component production, calibre assembly and extensive quality control.

The distinguishing features of the Alpina Full Black Extreme Regulator are its off-centre hour display at 10 o'clock and its totally matt black look. What is more, the bridges, ratchet-wheel and barrel are all decorated, investing the watch with a powerful character at the service of precision. All Alpina watches are Swiss Made and produced at its Manufacture in Geneva.

The movement matches the overall logic behind this Swiss watch. Simple, sturdy and efficient, Calibre AL-650 is a Unitas base movement. Its diameter of 16.5’’’ would normally have destined it for pocket-watches, which makes it a powerful “engine” and protects it effectively from shocks and from the influence of all the factors that can affect the timing, the reliability and the durability of its components. It is a mechanical hand-wound movement with a 42-hour power reserve. Its finishing details are meticulously executed while not outrageously pretentious. The crown-wheel and ratchet are sunbrushed, whereas the bridges are decorated with Côtes de Genève and also blackened by a PVD treatment. Its most significant “in-house” personalisation lies in its regulator-type displaying combining the advantage of excellent readability with that of extremely reduced energy absorption. The hour hand is thus off-centred at 10 o’clock, while the minute hand occupies the dial centre. Both are white and coated with Superluminova, making it ideally visible against the black dial case, whatever the surrounding lighting conditions. A small seconds completes the picture at 6 o’clock. The two applied hour and seconds dials are rimmed by a circular satin-brushed silvered ring. The graduations of the various indications correspond to those one would expect for technical or sporting use. No superfluous decorations or indications spoil the functionality of this exemplary display.

“The Alpina Avalanche Extreme Regulator is a watch that thus fully corresponds to its ambition of a resolutely sporting model, endowed with all the necessary qualities: sturdiness, reliability, water resistance, precision, unbeatable quality/price ratio. It asserts itself by a distinctive yet not flashy identity,” said Peter Stas.

The discretion and humility of this Geneva-based brand make this model a prime choice for those not seeking ostentation but with a preference for exclusive and authentic products. Lastly, the quality/price ratio of the Alpina Avalanche Extreme Regulator is unbeatable. A price well under three thousand US$ makes it genuinely affordable for any budget.

Technical Information – Alpina Extreme Full Black Regulator

* Movement: Mechanical hand-wound, AL-650 42-hour power reserve Bridges decorated with Côtes de Genève Ratchet-wheel and barrel in matt black PVD with sunray decoration

* Functions: Hours, minutes, seconds

* Case: Matt black, PVD stainless steel 48 mm in diameter Sapphire crystal front and back Screw-down crown with Alpina triangle in red enamel Individually numbered Water-resistant to 200 m

* Dial: Black regulator with Alpina logo motif at 3 o'clock. Centre minute hand, hour dial at 10 o'clock and seconds dial at 6 o'clock. Applied polished hour-markers, luminescent hands

* Bracelet/Strap: Rubber with buckle
* Retail price: $ 2,790

About Alpina

Alpina is an independent family owned watch manufacturer based in Plan-les-Ouates, Geneva. Founded in 1883, Alpina celebrates its 125th Anniversary in 2008 and is developing into a cool Sports & Lifestyle brand with its new, contemporary-design Extreme collections. The company is involved in all stages of Watch Production, from initial design to final assembly and quality control. Each watch is assembled by hand and extensively controlled with latest equipment to ensure maximum quality. The company innovates to offer creativity and exceptional value. Its factory in Plan-les-Ouates Geneva is ultra modern and offers the best environment for its watchmakers. Production will reach 10’000 timepieces in 2008. More information can be found at www.alpina-watches.com or blog.alpina-watches.com.

Posted by Industrial-Manufacturing at 01:48 AM | Comments (0)

Push-to-Connect In-Line Filters Introduced

Industrial Specialties, Mfg. is pleased to announce the introduction of push-to-connect in-line filters. These filters are exclusively available from Industrial Specialties, Mfg and designed with John Guest push-to-connect style fittings integrated into the Celcon plastic filter housing. This unique in-line filter offers versatility and customization for a variety of applications.

(PRWEB) October 7, 2008 -- Exclusively available from Industrial Specialties Mfg, this exciting, new line of in-line filters can be easily connected and disconnected for service on tubing applications. Designed with John Guest® push-to-connect style fittings integrated into the Celcon® plastic filter housing, this unique in-line filter product line offers versatility and customization for a variety of applications.

Available in micron sizes ranging from 20 to 250 micron and end connections in any one of three standard tubing O.D. sizes: 1/4", 5/16" and 3/8", the product can be easily tailored to meet specific performance requirements for air, vacuum, and some fluid applications.

More product information is available by contacting Industrial Specialties Mfg., Inc., 4091 S. Eliot St., Englewood, CO 80110. Phone (800)781-8487. Website: http://www.industrialspec.com,
e-mail: sales(at)industrialspec.com

Contact: Jim Davis
(303) 781-8486
1-800-781-8487

Posted by Industrial-Manufacturing at 01:48 AM | Comments (0)

Nutricap Labs to Attend Natural Products Expo East For Fifth Consecutive Year

Nutricap Labs, a leading provider of nutraceutical manufacturing services is proud to announce its attendance for the fifth consecutive year at Natural Products Expo East in Boston, Massachusetts from October 15 to October 18. Ranked as one of the top 200 trade shows in the United States, Natural Products Expo East is the largest natural and organic products trade show on the East Coast.

Farmingdale, NY (PRWEB) October 7, 2008 -- Nutricap Labs, a leading provider of nutraceutical manufacturing services is proud to announce its attendance for the fifth consecutive year at Natural Products Expo East in Boston, Massachusetts from October 15 to October 18. The event will be taking place at the Boston Convention & Exhibition Center (BCEC). Nutricap Labs will be exhibiting at booth #347.

Jason Provenzano, Executive Vice President of Sales and Operations for Nutricap Labs said, "We are excited to attend Natural Products Expo East once again this year. Last year's convention in Baltimore proved to be a great success for Nutricap Labs and we look forward to building upon that success in Boston and taking our organization to the next level in 2009."

Ranked as one of the top 200 trade shows in the United States, Natural Products Expo East is the largest natural and organic products trade show on the East Coast, featuring thousands of the newest and best-selling products and branded ingredients from more than 1,100 companies. This show draws an international audience by delivering the best in organic at Organic Products Expo-BioFach America, while also offering an extensive training program for retailers.

Since 2003, Nutricap Labs has been at the forefront of nutraceutical technology and manufacturing. Our ability to provide our customers with full service supplement manufacturing solutions including product formulation, label design and packaging design, as well as drop shipping and order fulfillment has helped make Nutricap Labs a well-known and respected name in the nutraceuticals industry. Nutricap Labs facilities and manufacturing procedures are GMP certified, thus guaranteeing that all products exceed quality and efficacy standards. For additional information, visit Nutricap Labs.

Posted by Industrial-Manufacturing at 01:45 AM | Comments (0)

New York Businesses Increasingly Turn to NY-Based Purolator USA for Transportation Logistics

Businesses throughout New York State face unprecedented increases in transportation logistics costs, at a time when economic conditions within the state are not conducive to growth or to business in general. As a result, many business operators are turning to transportation logistics provider Purolator USA, which offers a wide array of logistics services at cost efficient pricing levels, right in their own backyard.

Jericho, NY (Vocus/PRWEB ) October 7, 2008 -- Businesses throughout New York State face unprecedented increases in transportation logistics costs, at a time when economic conditions within the state are not conducive to growth or to business in general. As a result, many business operators are turning to transportation logistics provider Purolator USA, which offers a wide array of logistics services at cost efficient pricing levels, right in their own backyard.

These businesses are finding that Purolator USA, which operates several facilities throughout New York State, including its headquarters office in Long Island, processing facilities in Newburgh and New York City (JFK Airport) and a branch office in Buffalo, offers customers customized logistics plans that take into account specific regional needs, at a competitive price.

“We are pleased to offer customized logistic services to New York businesses, especially at a time when our competitive pricing and focus on customer service can really help our customers cut costs,” says Purolator USA President John Costanzo.

Purolator USA is recognized as a leader in providing logistics services for shipments traveling to-and-from Canada, as well as within the United States. The company’s cross border expertise has been especially helpful, as bilateral trade between the United States and Canada is at an all-time high.

New York businesses are taking advantage of the strong market in Canada for their goods. During 2007, New York businesses exported more than $13 billion in goods to Canada an increase of almost 38 percent over the past five years. During the same period, New Yorkers purchased more than $26 billion in Canadian goods and services.

“Clearly there is a strong need among New York businesses for logistics providers with expertise in cross border transactions,” Costanzo says. “Purolator USA stands apart from our competitors because of our vast experience in moving goods between the United States and Canada.”

Purolator USA has operations in both Canada and the United States, which provide access to established and extensive distribution networks throughout either country. Through its Purolator Trade Solutions service, Purolator USA provides access to cross border trade specialists, who can easily navigate U.S. and Canadian customs regulations and procedures.

In addition, Purolator’s New York processing centers are poised to consolidate goods for easy transport over the border into Canada, and to simplify returns back into the U.S. “Businesses can realize a tremendous cost savings if they take the time to find a logistics provider who can consolidate their goods into a fewer number of shipments,” Costanzo says. “Because of Purolator’s extensive distribution networks in Canada and the U.S., we can help avoid costly warehouse stopovers and transfers.”

As New York businesses continue to look north to expand their customer bases, experienced cross border logistics providers will be a vital part of the business supply chain.

For more information about Purolator USA, please visit www.purolatorusa.com.

About Purolator USA
Purolator USA, Inc. is a subsidiary of Purolator Courier Ltd, Canada’s largest integrated distribution services company. Purolator USA specializes in the air and surface forwarding of small packages and freight shipments, customs brokerage and delivery to, from and within the North American market.

In addition to its facilities throughout New York State, Purolator USA has expanded into several key markets including Los Angeles, Seattle, Chicago, Detroit, Dallas/Ft. Worth, Philadelphia and Raleigh/Durham.

For more information, please contact:
Kimberly Caiaccio
Purolator USA
(516) 681-3749 ext. 2170
kcaiaccio@purolator.com

Posted by Industrial-Manufacturing at 01:45 AM | Comments (0)

Tiger Optics Surpasses 500 CW-CRDS Analyzers in Use, Debuts LaserTrace+ Line

Tiger Optics expects continued growth through product enhancements and affordable upgrades.

Warrington, PA (PRWEB) October 7, 2008 -- Tiger Optics, a leading manufacturer of laser-based trace gas analyzers, today announced that it has over 500 analyzers in service across the world, using its patented continuous wave cavity ring-down spectroscopy (CW-CRDS) technology. Tiger Optics' CW-CRDS analyzers, the most stable, accurate, and widely used form of CRDS, currently provide gas analysis to the gas, semiconductor, laboratory, chemical and other industries in more than 23 countries.

As part of the commitment to user satisfaction that has lead to over 80 percent return customer rates, Tiger Optics has enhanced its popular LaserTrace line. The key elements of the new LaserTrace+ line are its solid laser-locked optical design, built-in auto-verification, faster speed of response, and improved data display and handling. Users can upgrade their existing Tiger tools to LaserTrace+ performance levels with affordable TigerPro software combined with the new reference cell.

"Our original analyzers are so versatile and robust that it's our goal to keep them evergreen for our users," explains Tiger's CEO, Lisa Bergson. "By offering enhanced software and upgradable hardware improvements, our longstanding customers can enjoy the same advantages as new LaserTrace+ owners."

The LaserTrace+ line of products provides multi-point analysis of inert, toxic, hydride and corrosive gases. It offers a growing array of molecular components, including moisture, oxygen, methane, formaldehyde, ammonia, hydrogen cyanide, and other species of interest to Tiger's diverse customer base. Plus, it affords the widest dynamic range, from parts-per-trillion to parts-per-million of any dedicated analyzer in the market today.

"With users from so many industries spanning global markets, we are constantly looking for new and better ways to enhance their experience of CW-CRDS technology," Bergson notes. "The new LaserTrace+ line, combined with affordable upgrades available for the hundreds of Tiger Optics analyzers already in use, offers our customers viable alternatives even in trying times."

The LaserTrace+ line is immediately available, providing CW-CRDS analysis into parts-per-trillion levels of species, including H20, NH3, CH4, and more. The multi-point LaserTrace+ line is a complementary product to the single-point HALO+ line of analyzers that also provides parts-per-trillion levels of analysis, but in a compact framework for stationary and mobile analysis. More information on the LaserTrace+, HALO+, and other Tiger Optics' CW-CRDS analyzers and monitors can be found on www.tigeroptics.com.

About Tiger Optics:
Tiger Optics, LLC leads the way in 21st Century Spectroscopy by bringing to market the world's first commercial gas analyzers based on patented Continuous Wave Cavity Ring-Down Spectroscopy (CW-CRDS) technology. Tiger Optics' cutting edge gas analyzers offer unparalleled and absolute accuracy, real-time response, high sensitivity and low cost of ownership. It serves the most demanding applications for an array of analytes, including moisture, oxygen, methane, acetylene, hydrogen cyanide, formaldehyde, and ammonia. As a result, the company's analyzers have been designated transfer standards by nine of the world's leading National Laboratories. With over 500 analyzers sold, Tiger Optics is now improving process yields for companies worldwide in a host of industries, including: semiconductor, laboratory, process control, automotive, and alternative energy; as well as industrial, specialty, and ultra-high-purity gas. Headquartered in Warrington, PA, Tiger Optics is represented in the United States and internationally by a select group of sales and service organizations highly experienced in gas analysis and well versed in the advantages of CW-CRDS technology. For additional information, visit www.tigeroptics.com

Posted by Industrial-Manufacturing at 01:45 AM | Comments (0)

National Technical Systems Names General Manager for Massachusetts Operations

National Technical Systems (NTS) announces the arrival of Chuck LaMarca to its Boxborough and Acton, Massachusetts facilities. LaMarca brings more than 20 years of multi-industry experience in management, manufacturing, engineering, and sales & marketing to the position.

Boxborough, MA (PRWEB) October 7, 2008 -- National Technical Systems Inc. (NASDAQ: NTSC) (NTS), a leading provider of engineering services, announced recently the appointment of Chuck LaMarca to the role of General Manager of the Boxborough and Acton, Massachusetts facilities.

Chuck LaMarca joins NTS with more than 20 years of experience in management, manufacturing, engineering, sales and marketing at organizations in the construction products, electronics, automotive and marine industries. Most recently he held the position of Chief Executive Officer at Keller Companies, Inc. of Manchester, NH. Prior organizations include American Engineering Components, Applied Power Corporation, and Lockheed Corporation. Chuck holds a B.S. in Industrial Engineering from the University of Massachusetts at Lowell and has been a member of Vistage International, the world's leading executive training organization, for over seven years.

"I am excited to join the team here at NTS Operations. We have terrific initiatives that we are implementing at both locations in Massachusetts, and I look forward to meeting our clients to share the many changes that will enhance our customer service," noted Chuck LaMarca.

Dwight Moore, Chief Operations Officer for NTS, stated "The Boxborough and Acton facilities are instrumental locations for the NTS enterprise. We've seen fantastic growth in our EMI/EMC, environmental and power products offerings, and I am confident that Chuck will help bring us to a higher level of productivity and customer satisfaction."

Chuck LaMarca can be contacted at the Boxborough, MA location at 978-266-1001.

About NTS
National Technical Systems, Inc. is a leading provider of engineering services to the defense, aerospace, telecommunications, automotive and high technology markets. Through a world-wide network of resources, NTS provides full product life-cycle support, offering world class design engineering, compliance, testing, certification, quality registration and program management. For additional information about NTS, visit our website at www.ntscorp.com or call 800-270-2516.

The statements in this press release that relate to future plans, events or performance, are forward-looking statements that involve risks and uncertainties, including risks associated with uncertainties pertaining to customer orders, demand for services and products, development of markets for the companies' services and products and other risks identified in the companies' SEC filings. Actual results, events and performance may differ materially. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date hereof. The companies undertake no obligation to release publicly the result of any revisions to these forward-looking statements that may be made to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events.

"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Statements in this press release regarding National Technical Systems' business which are not historical facts are "forward-looking statements" that involve risks and uncertainties. For a discussion of such risks and uncertainties, which could cause actual results to differ from those contained in the forward-looking statements, see "Risk Factors" in the Company's Annual Report or Form 10-K for the most recently ended fiscal year.

Posted by Industrial-Manufacturing at 01:45 AM | Comments (0)

TriQuint Powered Integrated Circuits Used in “Big Bang” Experiment at CERN Facility

TriQuint’s GaAs Foundry Process Technology Implemented in IPtronics ICs Used in CERN’s Large Hadron Collider Project

HILLSBORO, Ore. (Business Wire EON/PRWEB ) October 7, 2008 -- TriQuint Semiconductor, Inc (NASDAQ:TQNT), a leading RF front-end product manufacturer and foundry services provider, today made known its technology was used in the design of integrated circuits (ICs) being used in the CERN Large Hadron Collider (LHC).

The LHC, billed by some as the “world's biggest, most highly-anticipated physics experiment” is a 27 kilometer (17 mile) long particle accelerator designed by the European Center for Nuclear Research (CERN) to help physicists recreate the conditions that occurred just after the Big Bang. The project has been in development for 20 years and includes input from 7,000 scientists from 60 countries. The LHC experiments, besides pursuing basic physics goals, may help scientists treat diseases, improve the Internet, and open the door to travel through extra dimensions.

TriQuint’s GaAs foundry process was utilized by IPtronics ApS as it developed thousands of specialized Gallium Arsenide (GaAs) integrated circuits called PA8-E. The PA8-E devices are used as front-end electronics for Resistive Plate Chambers (RPC), a gaseous detector capable of sub-nanosecond time resolution on very large areas. These GaAs based ICs were shipped to the Italian National Institute for Nuclear Physics and are being utilized as muon trigger detectors in ATLAS, one of the four experiments being carried out at the LHC. Muons are subatomic particles, which can be produced in high energy (7+7 TeV) proton-proton collisions occurring in the LHC.

Jesper Bek, Vice President of Sales and Marketing for IPtronics said “I am delighted to note our contribution to one of the most significant physics experiments in our time. It is fascinating to see what can be achieved when great processes and design houses come together.”

Mike Peters, Director of Marketing for TriQuint Foundry said “It is so exciting to know that TriQuint plays a role in the Large Hadron Collider or “Big Bang” project. This project is awe-inspiring in its scope and the spirit of cooperation which has brought together thousands of scientists from around the world to explore questions about to the very nature of our existence.”

TriQuint’s advanced technology process portfolio includes integrated passives, pHEMT, HBT, BiHEMT, and GaN enabling the smallest most cost-effective RF module solutions in the industry. TriQuint offers competitive high-volume manufacturing costs. Customers around the world utilize TriQuint’s foundry services to turn RF designs into products.

FACTS ABOUT TRIQUINT

Founded in 1985, we "Connect the Digital World to the Global Network"™ by supplying high-performance RF modules, components and foundry services to the world's leading communications companies. Specifically, TriQuint supplies products to four out of the top five cellular handset manufacturers, and is a leading gallium arsenide (GaAs) supplier to major defense and space contractors. TriQuint creates standard and custom products using advanced processes that include gallium arsenide, surface acoustic wave (SAW) and bulk acoustic wave (BAW) technologies to serve diverse markets including wireless handsets, base stations, broadband communications and military. TriQuint is also lead researcher in a 3-year DARPA program to develop advanced gallium nitride (GaN) amplifiers. TriQuint, as named by Strategy Analytics in August 2008, is the number-three worldwide leader in GaAs devices and the world’s largest commercial GaAs foundry. TriQuint has ISO9001 certified manufacturing facilities in Oregon, Texas, and Florida and a production plant in Costa Rica; design centers are located in North America and Germany. Visit TriQuint at www.triquint.com/rf to register for our newsletters.

FACTS ABOUT IPTRONICS

IPtronics is a fabless semiconductor company offering next generation integrated circuits for Parallel Optical Interconnects. The TIA’s and VCSEL drivers enable low power, high density, high bandwidth and low cost modules intended for the computer, storage and communications industry.

IPtronics A/S was established end 2003 by former Managers, Innovators and Technical Staff from GIGA A/S that was sold in 2000 to Intel Corporation for 1.25B USD. The team has a long standing history of leadership, not only in the field of high speed chip design, but also in building efficient teams and remarkable business results.

Headquartered in Denmark, IPT has an office in silicon valley along with a network of distributors worldwide. Please visit www.iptronics.com for more information.

Posted by Industrial-Manufacturing at 01:44 AM | Comments (0)

Blackfin® Processor Powers Indyme Connect-LX Retail Store Communications Platform

Connect-LX design leverages Blackfin processor performance to build an integrated communications hub connecting retail store systems

NORWOOD, Mass. (Business Wire EON/PRWEB ) October 7, 2008 -- Today Analog Devices, Inc. announced the adoption of the Blackfin embedded processor in the new Indyme Solutions (San Diego CA) Connect-LX in-store communications and event processing appliance. This integrated hardware platform controls communications data streams in retail environments connecting store customers and associates, POS and price scanners and security and loss prevention monitors. Indyme is using the convergent architecture Blackfin processor in its Connect-LX system to significantly enhance functionality of this new generation of products. New features include VoIP and analog phone system interfaces, as well as support for wireless PDA, kiosks, handheld units, price scanners, and other devices to control loss prevention and other critical operations. Among early adopters of the new Connect-LX are some of the largest retail chains in the United States.

At the heart of the Connect-LX system is the Blackfin ADSP-BF533 running the uClinux kernel which handles system level functions. The Asterisk VoIP server and proprietary Indyme software provide processing for up to eight analog phone lines, two high-fidelity audio streams for PA and walkie-talkies. The ADI AD1980 SoC audio processor chip processes raw callbox data streams from as many as 16 303MHz receivers, receiving and configuring simultaneous input from multiple 802.11-based call boxes.

“ADI’s Blackfin beat out all the other processors we considered on a number of factors, including high processing power, low energy use (which enabled a fanless design), and reliable uClinux operating system and device driver support,” said Fred Anderson Engineering VP of Indyme Solutions. “The new Blackfin processor is clearly the key component of this design, allowing us to realize our commitment to customers for low-cost, feature-rich, environment-friendly solutions for the modern retail environment.”

Previous generations of products required a much more complex board design, due in part to additional interface circuitry, which in turn required higher levels of operating power consumption. The Blackfin design includes many of these interfaces on the processor chip, eliminating components and complexity. The processor in earlier designs was also not fast enough to provide the levels of signal control and routing, and audio and telephony signal processing required in large retail operations. The convergent Blackfin architecture and high clock rate of the ADSP-BF533, combined with its compiler-friendly design, result in lower system cost, reduced board space and less power consumption while adding an impressive number of high value features.

Indyme is proud to promote the Connect-LX as a significantly “greener” replacement for earlier call box processing units, due to its much lower power consumption. The company has compiled comparison studies of “before” and “after” environmental impacts of older products versus the new Connect-LX unit to demonstrate its “green efficiency”.

“The power consumption of user applications is highly dependent on processor architecture and economy of design,” says Jerry McGuire, vice president, General Purpose DSP at ADI. “The Blackfin offers superior functionality and performance, through its use of a unique, convergent architecture that natively performs control functions as well as fixed point signal processing with a dual MAC design. The convergent processor design is more than a vision of the future of technology; it’s today’s required reality.”

A Convergent Future Demands Blackfin-Class Processing

Analog Devices’ Blackfin embodies a new breed of 16/32-bit embedded processor with the industry’s highest performance and power efficiency for applications where a convergence of capabilities -- multi-format audio, video, voice and image processing; multi-mode baseband and packet processing; and real-time security and control processing -- are critical. It is this powerful combination of software flexibility and scalability that has gained Blackfin widespread adoption in convergent applications such as digital home entertainment, networked and streaming media, automotive telematics and infotainment, and digital radio and mobile TV.

About Analog Devices

Innovation, performance, and excellence are the cultural pillars on which Analog Devices has built one of the longest standing, highest growth companies within the technology sector. Acknowledged industry-wide as the world leader in data conversion and signal conditioning technology, Analog Devices serves over 60,000 customers, representing virtually all types of electronic equipment. Celebrating 40 years as a leading global manufacturer of high-performance integrated circuits used in analog and digital signal processing applications, Analog Devices is headquartered in Norwood, Massachusetts, with design and manufacturing facilities throughout the world. Analog Devices’ common stock is listed on the New York Stock Exchange under the ticker “ADI” and is included in the S&P 500 Index.

Blackfin is a registered trademark of Analog Devices, Inc. All other trademarks included herein are the property of their respective owners.

RSS Feed: http://www.analog.com/en/press-release/feed.xml

Posted by Industrial-Manufacturing at 01:42 AM | Comments (0)

Audyssey Labs Sound Technology Selected by Volvo

Audyssey MultEQ Chosen by Volvo Cars to Develop the Next Generation of Audio Systems for Its Cars

LOS ANGELES (Business Wire EON/PRWEB ) October 7, 2008 -- Volvo Cars has chosen to use MultEQ, an innovative acoustical correction technology developed by Audyssey Labs, to calibrate new cars equipped with its top-of-the-line Premium Sound systems. MultEQ has earned many awards since its release and is now a key component in many high-end home theater products, including the entire line of Denon AVR's.

“MultEQ was originally developed to achieve reference sound in home theater systems based on several years of university research to identify the key factors that cause acoustical distortion. The algorithms we developed over the past six years were further refined to address the more challenging automotive environment. New measurement and equalization methods were needed in order to remove the acoustical problems in the car,” says Chris Kyriakakis, Audyssey CTO and Founder. “We are thrilled to partner with Volvo, a world-class manufacturer of automobiles to extend the home theater sound experience to their customers.”

“Choosing to work together with Audyssey Labs is evidence of our high ambition in the audio field," says Lex Kerssemakers, Senior Vice President Brand, Business & Product Strategy.

“This announcement is the first of several new markets where our technology will be integrated to improve the quality of sound," says Audyssey CEO Michael Solomon. “The breakthrough here is this is the first automated solution that improves sound in a wide listening area as opposed to a single seat.”

In addition to MultEQ, Audyssey has recently developed and released several other technologies: Dynamic Volume, enabling hands free listening through volume levelling, Dynamic EQ for preserving tonal balance and surround impression during lower level listening, and BassXT for extending bass response from smaller speaker drivers. Audyssey anticipates these technologies will also migrate to the automotive environment over time.

About Audyssey Laboratories™

Established in 2002, Audyssey Laboratories is the industry leader in research-based sound equalization solutions for the professional and consumer audio marketplace. For more information, visit www.audyssey.com.

Posted by Industrial-Manufacturing at 01:42 AM | Comments (0)

Merck KGaA and Nano-Terra Announce Extension of Nanotechnology Solutions Alliance

DARMSTADT, Germany (Business Wire EON/PRWEB ) October 7, 2008 -- Merck KGaA (EMD in North America) announced today the extension of its existing strategic alliance with Nano-Terra, Inc., a leading nanotechnology co-development company.

The original agreement between the companies, announced in February 2007, was to develop innovative, nanotechnology-based products and solutions based on Merck’s materials.

After successfully meeting initial development milestones, this new agreement will focus on specific application development for Merck customers and moving the technical capabilities into the marketplace for commercialization.

Under the new agreement, which extends the partnership through 2011, Nano-Terra will develop novel application techniques for existing Merck materials which are designed to address market opportunities where smaller (micron and nanometer) feature sizes are required for certain printable electronics components. The Merck fabrication processes will be based on Nano-Terra’s proprietary soft lithography technology, invented and pioneered by Professor George Whitesides of Harvard University, a co-founder of Nano-Terra, and the partners will share commercialization rights on a global basis. Terms of the agreement were not disclosed.

The new development work will be done at Nano-Terra's lab facilities in Cambridge, with close cooperation of a Merck scientific team and by EMD Chemicals, Merck's North American affiliate.

Dr. Thomas Geelhaar, Vice President Liquid Crystals R&D and Business Development Chemicals of Merck KGaA, said, "We were very pleased by the progress made in the initial stages of our relationship with Nano-Terra. We look forward to our continued collaboration with Professor Whitesides and his team, and to building on these developments to create specific products which we believe will provide significant benefits to our customers.”

"Through its embrace of innovative technologies and applications, Merck continues to underscore its commitment as a pioneer in research and development,” said Dr. Carmichael Roberts, Vice Chairman of Nano-Terra. "We are delighted to extend our working relationship with them and to enhance their exploration of how to best optimize materials to improve products and processes for its customers.”

In 2006, Merck bestowed on Professor Whitesides the prestigious Emanuel Merck Lectureship prize.

About Nano-Terra, Inc.

Nano-Terra is a privately-held research and development company which has field-exclusive licenses to more than 50 patents on work done by co-founder Dr. George Whitesides at the renowned Whitesides Lab at Harvard University, where he is the Woodford L. and Ann A. Flowers University Professor. He is the recipient of the 2007 Priestley Medal.

The company leverages its intellectual property through co-development and other agreements with Fortune 500 industrial and manufacturing companies and the U.S. government. Nano-Terra’s scientific methods can be used to fabricate advanced materials and devices that enhance existing products or create entirely new products in a broad range of areas. These include smart materials and surfaces; flexible electronics such as displays and electronic packaging; fuel cells, batteries and solar power devices; sensors; industrial products and processes; and a wide range of consumer goods. For more information, visit www.nanoterra.com.

About EMD Chemicals Inc.

EMD Chemicals represents the North American chemical sector of Merck KGaA, Darmstadt, Germany. As an international organization with 1,100 employees and revenues of more than $US 350 million, EMD Chemicals focuses on specialty chemicals for pharmaceutical, biotech, cosmetic, agricultural, automotive, plastics, electronics and other industrial applications.

All Merck Press Releases are distributed by e-mail at the same time they become available on the Merck Website. Please go to http://www.subscribe.merck.de to register online, change your selection or discontinue this service.

Merck is a global pharmaceutical and chemical company with sales of EUR 6.3 billion in 2006, a history that began in 1668, and a future shaped about 35,000 employees (including Merck Serono) in 56 countries. Its success is characterized by innovations from entrepreneurial employees. Merck's operating activities come under the umbrella of Merck KGaA, in which the Merck family holds an approximately 70% interest and free shareholders own the remaining approximately 30%. In 1917 the U.S. subsidiary Merck & Co. was expropriated and has been an independent company ever since.

Posted by Industrial-Manufacturing at 01:40 AM | Comments (0)

Handbag Designer 101 Announces 2nd Anniversary with Over 1,000 Members of the Handbag Designer Registry

Handbag Designer 101 celebrated over 1,000 members of the Handbag Designer Registry.

New York, NY (PRWEB) October 7, 2008 -- Handbag Designer 101 is proud to announce that after two successful years, their unique and exclusive database of Handbag Designers now has over 1,000 members for the United States and around the world.

"When we launched, everyone said that the concept of a website highlighting and featuring independent handbag designers was too niche and would not be considered an online destination," says Emily Blumenthal, Founder of Handbag Designer 101 and the Independent Handbag Designer Awards. "However, now HBD101 has developed a unique following of handbag designers, industry, manufacturers and handbag enthusiasts. In addition to the Independent Handbag Designer Awards, the only design competition for just handbags, handbag designers know that to be featured as 'Designer of the Day' is definitely something to brag about."

Part of the benefits of being a member of the Handbag Designer Registry is a chance to be a featured as "Designer of Day" which allows designers to discuss their emotional plight and the unique selling points of their handbag making Handbag Designer 101 not a blog but a viable medium for the accessories industry to find out who will be the next "It" handbag designer.

"I loved being featured on Handbag Designer 101 as it helped get recognized me as part of the handbag designer community," says Rebecca Minkoff, designer of her eponymous line, Rebecca Minkoff. Minkoff has been featured on Handbag Designer 101 several times with her "Designer of the Day" feature when her line launched. Since then, the Rebecca Minkoff line has flourished with several other stories that followed.

In addition, these designers get priority in other editorial coverage such as having their bag mentioned on the "Celebrity Bag Watch" section when a notable celebrity is seen in public wearing their bag. This gives these designers the opportunity to get recognition and press coverage they would most likely not get in traditional publications.

Currently, part of the Handbag Designer Registry, designers range from young to 'older,' craft, student to couture from as small as working out of their garage in Oklahoma to an exclusive design studio in Finland. This target demographic is niche indeed but coveted nonetheless to marketers and brands trying to reach this entrepreneurial and small business population.

Handbag Designer 101, the handbag designer resource, was inspired by the need for the handbag designer, aficionado and fan in all of us as one knows we can never have too many bags. Handbag Designer 101 and Independent Handbag Designer Awards trademarks are owned by handbagdesigner101.com, a privately held company based in New York City.

Today's HB101: http://www.handbagdesigner101.com/designer
Bag Trends: http://www.handbagdesigner101.com/trends
Celebrity Bag Watch: http://www.handbagdesigner101.com/celebrity
Handbag Events: http://www.handbagdesigner101.com/handbag_events
Jobs and Services: http://www.handbagdesigner101.com/jobs
2008 Independent Handbag Designer Awards Winners: http://www.handbagdesigner101.com/awards/winners_2008
Handbag Designer 101: http://www.handbagdesigner101.com; http://www.hbd101.com

Posted by Industrial-Manufacturing at 01:40 AM | Comments (0)

Steel King Now Offering Building Permit Storage Rack Solutions

Prevent delays in building permit, warehouse rack storage systems by including your rack supplier early in the process

(PRWEB) October 7, 2008 -- Whether it's for new warehouse construction or a distribution center overhaul, the last thing a facility manager needs to hear is that opening will be delayed by weeks or months due to building permit delays. Bringing in a warehouse storage rack supplier early in the process can help facility managers avoid being blindsided by building permit delays, and help keep operation plans on track. Some suppliers of warehouse rack storage systems can help prevent permit headaches by providing comprehensive building permit services.

"In the material handling equipment industry, permits are required but not limited to storage rack, pallet rack, rack picking systems, conveyor systems and mezzanine/storage platforms used in warehouses and home improvement centers," says Tony Landeros, President of Permit Services of California, a material handling permit expeditor servicing the Western United States.

"While the permit process usually takes from 3 to 6 weeks from beginning to end, it can take as long as 16 weeks," cautions Landeros. "Each city, county and state have their own ordinances that must be met; and some cities require full compliance with the federal Americans With Disabilities Act (ADA) before issuing a permit."

The key, according to Landeros, is to start the permit process as soon as possible and get it right the first time. That way, facility managers won't have to wait on pins and needles for a municipal Building or Fire Department to get back to them-- with requests for more documentation that can require re-submission two, three, four or more times.

Any error, of course, translates into costly permit and operational delays.

To help facility managers avoid permit delays and keep operation plans on track, some suppliers of warehouse rack storage systems such as Steel King (www.steelking.com) prevent permit headaches by providing comprehensive building permit services. For instance, the company offers a calculation package for the permit process, and deals with all national, regional or local agents necessary to handle permitting. It accomplishes this with in-house professional engineering staff and a network of permit specialists.

"With seismic codes enforced nationally but with variations by locale, you need a company that understands the permit process with the resources to stay on top of it," says Steel King project coordinator Logan Lechleightner. Steel King, a major designer and manufacturer of warehouse storage rack, pallet rack and material handling/safety products, has helped plan warehouses since 1970. It is a licensed fabricator in Los Angeles County, which has some of the strictest seismic codes in the nation.

Fire codes can be a particular problem. "Building departments will not release the storage rack permit until you provide them with Fire Department High Pile Storage (HPS) approval," adds Landeros. "Most rack permit delays are due to poor HPS approval planning."

Even if the facility has a building permit, there will still be a fire permit inspection. This can involve sprinklers, vents, firewalls, access to exits, and hydrants.

"A good way to expedite the permit process is to work with a reputable storage rack manufacturer such as Steel King, which can supply or coordinate the engineering and layout details in a turnkey permit package," says Landeros.

For more info, contact Donald Heemstra at Steel King, 2700 Chamber St., Stevens Point, WI 54481; call 800-826-0203; email: dheemstra @ steelking.com or visit the website www.steelking.com.

Posted by Industrial-Manufacturing at 01:40 AM | Comments (0)

Commercial Real Estate Group of Tucson Compiles New Statistics on Tucson Industrial Real Estate Market

Commercial Real Estate Group of Tucson has compiled some meaningful statistics about the local market on its website, cretucson.com.

(PRWEB) October 7, 2008 -- According to Commercial Real Estate Group of Tucson research, nearly 110,000 square feet of new industrial real estate will come into the Tucson, Arizona market in the next few months, giving businesses fresh choices on where to locate their operations.

Only about 26 percent of the space under construction at mid-year 2008 was preleased, according to the CoStar Industrial Report for the Tucson market.

"There are some good opportunities down the road for tenants and buyers to find new space that ideally fits their needs," said Michael S. Coretz, a broker with Commercial Real Estate Group of Tucson.

Tucson's industrial real estate market reflects national trends of increasing vacancy rates, a drop in net absorption and smaller increases in rental rates, the report said.

The Tucson metropolitan area in Southern Arizona currently has about 2.6 million square feet of vacant industrial space. Quoted rental rates are at $8.76 a square foot.

Commercial Real Estate Group of Tucson has compiled these and other meaningful statistics about the local market on its website, www.cretucson.com. "We want to arm potential tenants and buyers with an accurate picture of our market conditions," said Coretz. "That can only help them make smart, informed choices, especially in this current economic condition of tight credit."

Commercial Real Estate Group of Tucson represents corporate clients and buyers, assisting them in locating, negotiating and leasing or buying business space in the Tucson metropolitan area. Its website, www.tucson-tenant-representation.com, provides several reports on how to navigate the commercial real estate transaction. More information is available by phoning 520-299-3400.

Posted by Industrial-Manufacturing at 01:40 AM | Comments (0)

Kozio Announces Latest Release of its Test Tool for the Electronics Industry

Reducing the time and cost of testing circuit boards in design and production

Longmont, CO (PRWEB) October 6, 2008 -- Kozio®, Inc. (www.kozio.com), leading provider of embedded circuit board functional test, today announced the latest release of its test automation tool for volume testing of processor-based circuit boards. Leading technology companies in the electronics industry use Kozio's embedded test platform to reduce their cost of end-of-line manufacturing test while gaining the confidence to ship.

"Kozio provides a solid embedded functional test foundation, giving technology providers the confidence that their design and assembled device work as designed," stated Joe Skazinski, president and CEO of Kozio. "Our test management tools automate and record the true-speed end-of-line functional testing all manufacturers require."

Kozio's SequenceRunner™ application automates the various processes associated with testing and preparing an electronic device for shipment. The SequenceRunner application runs on a test computer and executes the customer's test process. The connection to the device under test is over a variety of interfaces, such as a standard Ethernet (LAN) connection, and does not require any special test hardware on the test computer or connected to the circuit board.

The Kozio solution delivers on two key requirements: providing excellent test coverage while reducing per device test time, including in-system programming. Unlike any other solution, Kozio's embedded functional test components provide the test coverage required to confidently ship an electronic device.

Using the Kozio solution, a test engineer can quickly create their desired process, including test actions such as executing a full board test suite, downloading new application images to a device under test, fast in-system programming, third-party tool execution (such as JTAG programming), executing database queries, and automatically recording all steps and results in an integrated database. No programming or SQL knowledge is required to set up a complete test process.

With the new SequenceRunner™, an engineer and operator can:

* Scan a bar code and automatically execute a comprehensive test suite
* Deliver a one-button end-of-line test process to a contract manufacturer
* Automate the programming of board specific information
* Use database-driven testing for consistency, without having to learn SQL
* Track the testing history of all boards based on a variety of datum

kDiagnostics® - The Embedded Functional Test Platform

kDiagnostics is an embedded software platform providing circuit board and system-level functional test for design validation, environmental test, manufacturing test, power-on self-test, and returns testing. kDiagnostics works with SequenceRunner to provide the embedded functional tests. Delivered with the platform is a library of device-specific at-speed functional tests, ready-to-run embedded test applications, user manuals, technical support hours, a rich API, and a complete development kit.

"Kozio's kDiagnostics product allows us to bring up our new board designs in record time. In many cases, kDiagnostics proves our board designs in only minutes! kDiagnostics quickly discovers cold solder joints on memory and PCI busses, isolates Ethernet MAC and PHY problems, scans for PCI components, and verifies serial ports, LEDs, etc.," stated Barry Dallavalle, Software Director, ADI Engineering, Inc.

Pricing & Availability

SequenceRunner 1.10 is now available. Pricing is $2,450 per seat, for single target support. kDiagnostics is priced separately. Licenses are transferable to contract manufacturers. Support provided for Microsoft Windows and some Linux operating systems.

About Kozio, Inc

Founded in 2003, Kozio Inc. is the technology leader for real-time embedded test applications and fully integrated test management software for design validation, test and debug of 32-bit embedded systems. Kozio's hardware validation is used and trusted by companies such as General Electric, Harris, Honeywell, HP, Motorola, Polycom, Perceptron, Raytheon, Scientific Atlantic, Thomson and many others. Kozio products are used globally in most industries developing and/or manufacturing electronic products. Our royalty-free kDiagnostics and kPOST applications offer a complete solution that addresses the need for better test coverage at a significantly reduced cost. Our SequenceRunner, SequenceReporter, and ValidationAssistant applications offer one-button testing, report generation, and interactive troubleshooting for volume circuit board testing. Kozio is headquartered in Longmont, CO.

Sales Contact: Kozio, Inc., 2400 Trade Centre Ave, Longmont, CO 80503, Tel: +1 303-776-1356, Web site: www.kozio.com

Kozio, the Kozio logo, kDiagnostics, kPOST, ValidationAssistant, SequenceRunner, and SequenceReporter are trademarks or registered trademarks of Kozio, Inc. All other trademarks and products are the property of their respective owners.

Posted by Industrial-Manufacturing at 01:40 AM | Comments (0)

Recliners by Mac Motion Chairs Expected to Boost Sales for Wholesale Furniture Brokers

Wholesale Furniture Brokers' furniture sales for September, 2008 have increased by over 50% compared to last year's figures. With the newly added recliners and ergonomic office chairs by Mac Motion Chairs (www.macmotionchairs.net), sales are expected to increase again due to the high quality construction, diverse styles, and reliability of these products.

Atlanta, GA (PRWEB) October 6, 2008 -- Over the past few years, Wholesale Furniture Brokers (GoWFB.com) has been increasing its growth in sales volume. Sales have increased by over 50% for September, 2008 compared to last year's figures. Finding more manufacturers that offer new styles gives Wholesale Furniture Brokers more reach and the ability to give existing customers something new to buy. This strategy has proven to be successful. Wholesale Furniture Brokers expects to increase sales again with the new European designed recliners and ergonomic office chairs by Mac Motion Chairs. Each recliner and office chair is produced in China and then shipped to the USA. The construction, motion, covers, finishes, and warranty of Mac Motion Chairs recliners and office chairs give owners a sophisticated product that has been improving for over 30 years. Furniture retail businesses and interior decorators that shop at Wholesale Furniture Brokers will now be able to offer their customers diverse styles of recliners and office chairs that will meet the demands of individual comfort requirements. "We believe that Mac Motion Chairs' new products will reach a larger network of customers through Wholesale Furniture Brokers," says Mac Motion Chairs' Vice President of Sales, Tony McCracken when asked why Mac Motion Chairs chose to sell their recliners and office chairs on the Wholesale Furniture Brokers' website.

The construction of Mac Motions Chairs recliners features hardwood frames combined with 11-16 gauge tubular and plate steel that give customers durable and stable support. The frame, nylon webbing, and 1.8 density foam on the top, back, and arms of the seat provide overall comfort and body support. Owners will get lower and upper lumbar supports that are specifically designed for each style of recliner. The office chairs are constructed with polished aluminum and black high impact nylon. The chairs also have dual casters to allow smooth movement in the office area. Some of the office chairs feature adjustable backrests and contour lumbar support. The office chairs by Mac Motion Chairs will give customers of Wholesale Furniture Brokers the comfort and support they need for any home office furniture set they are purchasing.

Each Mac Motion Chairs recliner is designed with a multiple position recline that can be adjusted to stop in any position. When the back of the chair is reclining, the seat level will also rise to balance the leg and lower back support. This motion helps maintain blood circulation and comfort. Matching ottomans, styled with an angled design for additional support, are included with every recliner. Some Mac Motion Chairs models also feature adjustable headrests. A 360 degree swivel adds greater convenience to the recliners as the person using the chair can get in and out of the chair and have conversations in multiple directions. "These selling features for added comfort allow for more support while doing things people actually do in their everyday lives, like watching TV and movies," notes Jeff Penner, Sales Manager for Wholesale Furniture Brokers. The office chairs offer unique comfort and support as well. They are designed with pneumatic height adjustment, adjustable arms, tilt locks with tension control, and adjustable arms. The ability to control the height of the office chairs will allow owners to choose from more varieties of desks to be matched with the chairs.

Shoppers at Wholesale Furniture Brokers can choose the cover for their recliner from top quality leather that is double sewn inside and out or from durable microfibers that are supported by nylon backing making it easy to clean. The office chairs are available with top grain leather, black mesh, and black fabric.

The recliners designed by Mac Motion Chairs are available with a variety of wood finishes that can match any home decor. The finishes include walnut, maple, cherry, pecan, and natural. When customers are shopping at Wholesale Furniture Brokers, they will be able to match the recliners to any new living room furniture set they are buying.

Mac Motion Chairs back their products with warranties: one year parts warranty for recliners and five year warranty for office chairs.

About Wholesale Furniture Brokers
Wholesale Furniture Brokers launched its USA website, GoWFB.com, in 2002. The revolutionary "Click and Mortar" ecommerce website provides customers with local and online support with more than 30 independently owned affiliated outlets in the USA and Canada. Shoppers can choose from an increasing collection of worldwide styles at Wholesale Furniture Brokers. Canadian shoppers interested in buying Mac Motion Chairs' recliners can also view Flair Enterprises' recliners on GoWFB.ca for a similar product. Furniture retail businesses and interior designers interested in ordering furniture available on GoWFB.com and GoWFB.ca including Mac Motion Chairs can apply for Wholesale Furniture Brokers' furniture dealer and vendor program.

Posted by Industrial-Manufacturing at 01:40 AM | Comments (0)

October 06, 2008

Compact Solutions Delivers High-Performance Enterprise Information Integration (EII) Solutions that Lower the Total Cost of Information

Exclusive interview featuring Compact Solutions' Pankaj Agrawal.

Denver, CO (PRWEB) October 6, 2008 -- Pankaj Agrawal, Chief Executive and Technology Officer of Compact Solutions, recently participated in an exclusive interview with Mary Jo Nott and the BeyeNETWORK (www.BeyeNETWORK.com). In this interview, Agrawal describes how Compact develops high-performance enterprise information integration solutions to solve tough data challenges using parallel technologies and complex engineering.

"Compact helps customers solve the problem of data fragmentation across disparate systems to achieve the speed of real-time availability, the power of information and the profit from better decisions," says Pankaj Agrawal, Chief Executive and Technology Officer of Compact Solutions.

"With the increasing demand for near real-time access to corporate data, it is vital to improve performance, enable power users with better decision-making tools and marry service-oriented architectures to batch access," says Mary Jo Nott, Executive Editor of the BeyeNETWORK. "Compact Solutions optimize existing infrastructure and data warehouses by rearchitecting the application layer to improve performance and increase availability of CPUs on exiting hardware."

To listen to the interview, please click here.

The BeyeNETWORK Spotlights are intuitive dialogues with innovative solution providers, and these spotlights provide a cutting-edge introduction to the new products and services of interest to the business intelligence community. The Network publishes six newsletters serving more than 115,000 readers across a wide variety of industries, making it the largest newsletter-based information source for business intelligence, performance management, data warehousing, data integration and data quality.

About Compact Solutions
Compact Solutions is a premier provider of high-performance enterprise information integration (EII) solutions that solve the toughest data challenges confronting clients in the most information intensive industries across the world. A trusted advisor, Compact helps businesses achieve the speed of real-time availability, the power of information, and the profit from better decisions. Compact's experts offer deep, highly-sought technical skills and proven experience to accelerate speed to value for data warehousing, enterprise data integration, data management and business intelligence strategies. In addition, Compact's unique delivery model blends the best of onsite, offsite, and offshore development options for maximum flexibility and responsiveness to client needs.

Since 2002, Compact has been helping Global 1,000 organizations lower the total cost of ownership for their enterprise information assets by optimizing their data warehousing, business intelligence, and data integration environments for greater productivity, competitive advantage and profitability.

About BeyeNETWORK™
The Network's flagship site BeyeNETWORK.com leads the industry with up-to-the-minute news, newsletters, articles, executive spotlights, podcasts, expert-hosted channels and blogs. Experts include Claudia Imhoff, Bill Inmon, Craig Schiff, Colin White, David Loshin, and others. BeyeRESEARCH.com provides research and case studies from leading authors and experts in business intelligence. BeyeBLOGS.com is a business intelligence-specific community blogging site that provides an open forum about industry issues and challenges. BeyeSEARCH.com offers the first and only editor-driven directory and search engine specially built to serve this industry.

This press release is based upon information provided by the Company. The BeyeNETWORK does not independently verify statements made and has no obligation to update these statements after the date of release.

Contact:
BeyeNETWORK
Katie Rostermundt
krostermundt(at)b-eye-network.com
+1-262-780-0202

Contact:
Compact Solutions
John Westby
John.westby(at)compactsolutionsllc.com
+1-708-524-9500

Posted by Industrial-Manufacturing at 04:10 AM | Comments (0)

Kozio Announces Latest Release of its Test Tool for the Electronics Industry

Reducing the time and cost of testing circuit boards in design and production

With the new SequenceRunner™, an engineer and operator can:

kDiagnostics® - The Embedded Functional Test Platform

Pricing & Availability

About Kozio, Inc

Sales Contact: Kozio, Inc., 2400 Trade Centre Ave, Longmont, CO 80503, Tel: +1 303-776-1356, Web site: www.kozio.com

Posted by Industrial-Manufacturing at 04:09 AM | Comments (0)

Recliners by Mac Motion Chairs Expected to Boost Sales for Wholesale Furniture Brokers

Mac Motion Chairs back their products with warranties: one year parts warranty for recliners and five year warranty for office chairs.

Posted by Industrial-Manufacturing at 04:09 AM | Comments (0)

New Thin-Film, Precision Heavy Roll Machines for Solar Industry Available from Northfield Automation

A new level of precision for manufacturing heavy rolls of thin-film materials for the solar industry will be showcased by Northfield Automation at the Solar Power 2008 show. The first thin-film, heavy roll machine has been delivered to a major producer of solar cells in the United States.

Northfield, MN (PRWEB) October 6, 2008 -- A new level of precision for manufacturing heavy rolls of thin-film materials for the solar industry will be showcased by Northfield Automation at the Solar Power 2008 show. The first thin-film, heavy roll machine has been delivered to a major producer of solar cells in the United States.

Higher output is the key benefit of the capability to unwind and rewind thin-film materials of up to 12,000 pounds. It allows factories to increase processing efficiencies by using wider and heavier rolls of materials. Space and logistic problems are alleviated by a cantilevered design, which allows the rolls to be easily moved within the factory as well as more easily loaded onto machines from the side instead of the front.

Potential customers for heavy roll processing of thin-film materials include vendors, OEMs and traditional metal coil manufacturers, as well as the emerging thin-film photovoltaic (PV) industry for solar-cell energy applications.

"This level of precision handling of heavy rolls is new in the solar market," according to Brett Reese, president and CEO of Northfield Automation. "Innovation and competition will drive the transitioning solar market for thin-film applications as more and more companies pursue this technique. This will help accelerate growth at Northfield Automation over the next few years."

The company will share a booth with a global strategic partner, Solarcoating Machinery GmbH of Dormagen, Germany, at the Solar Power show (booth #1829) in San Diego, October 13 - 16. Northfield Automation brings a full range of custom machinery for roll-to-roll processing of precision thin-material applications, such as solar cells, conducting business primarily in the United States. Solarcoating Machinery GmbH brings the full range of equipment needed to make solar cells and assemble finished PV modules for customers in Europe. Both privately held companies benefit from expanded opportunities and global market share, in addition to an international base of on-site technical support and spare parts distribution services.

About Northfield Automation Systems (www.northfieldautomation.com)
Established in 1995, Northfield Automation Systems, Inc., designs, engineers and fabricates automation equipment for OEMs and manufacturers at all levels of production. Its engineers provide consultative support for streamlined manufacturing processes with stand-alone and turnkey integrated equipment. The company's vision is to become the global leader in roll-to-roll, high-precision, material handling equipment for thin-film applications, including flexible electronics, display, solar, flexible battery, and organic electronics.

Posted by Industrial-Manufacturing at 04:09 AM | Comments (0)

Martel Electronics Introduces the BetaGauge® 330, a Revolution in Pressure Calibration Technology for the Process Industries

The new BetaGauge® 330 Hand Held Pressure Calibrator with Integral Electric Pressure Pump has been engineered to put an end to the drudgery of using hand operated pumps for pressure calibration

Derry, New Hampshire USA, (PRWEB) October 6, 2008 -- At the ISA Expo 2008 in Houston, Texas, Martel Electronics will introduce a revolution in pressure calibration technology for the process industries.
Tom Fatur, President of Martel says, "The new BetaGauge® 330 has been engineered to put an end to the drudgery of using hand operated pumps for pressure calibration.

"With the new BetaGauge 330, technicians will have a lightweight hand held calibrator that generates pressures up to 150 PSIG (10 Bar/100 kPa) using a high performance integral electric pump.

"Before the BetaGauge 330, users had to manually generate pressures with tedious and hard to use manual pumps or use large, heavy and unwieldy boxes with limited portability and limited battery life. That time has come to an end."

The BetaGauge 330 (patent pending) has a form factor only slightly larger than Martel's popular BetaGauge 321 and weighs in at a mere 2.5 pounds (1.1 kg). The housing is contoured to easily fit a technician's hand with good balance top to bottom.

Performance doesn't stop with the pump. The BetaGauge 330 provides ±0.025% of full scale accuracy on its internal, isolated pressure sensor. Wide range temperature compensation on its internal sensor ensures accuracy in field applications. An external pressure module connection supports 29 ranges of BetaPort-P pressure modules for greater measurement capability.
A Pt100 RTD input is provided for temperature measurements accurate to ±0.1 °C (0.2 °F). This facilitates the use of the 330 for the calibration of mass flow computers.

In addition, the BetaGauge 330 measures and simulates 4-20 mA loop current signals. It can measure up to 30 VDC. An internal 24 VDC Instrument Power Supply supplies power to a transmitter under test.

Like its BetaGauge calibrator siblings, the 330 displays up to 3 calibration values at one time from the choice of internal pressure sensor, external pressure sensor, temperature from the optional RTD probe or electrical (mA or VDC). The display is a 128 x 64 pixel back lit LCD that's easy to read in any lighting condition.

The new BetaGauge 330 Pressure Calibrator provides a number of convenience features. Switch tests can be performed using internal or external sensor input. Percent (%) error and damping functions are provided. Up to five frequently used setups can be stored and retrieved with one button recall.

Pressure signals can be displayed in the user's choice of 19 engineering units to fit the specific requirements of the job.

The compact, rugged design operates on eight (8) standard AA Alkaline batteries. Due to the power saving designs incorporated in the BetaGauge 330, it can perform 300 calibration cycles to 150 PSI on one set of batteries.

The 330 comes in 3 ranges of 30 PSI (2 Bar/20 kPa), 150 PSI (10 Bar/100 kPa) and 300 PSI (20 Bar/200 kPa). The 300 PSI version uses a manually operated handpump. All ranges are capable of generating and reading vacuum as well as pressure.

Like all Martel calibrators, the BetaGauge 330 comes from the factory ready to go to work. Batteries ARE included along with NIST traceable calibration certificate, test leads, test hose, carrying case and user manual. The BetaGauge 330 is also available in various kit forms with RTD probe and adapter fittings and hoses.

Martel Electronics Corporation offers a diversified line of hand-held and bench calibrators, process instruments, process indicators, power supplies, meters and displays, and test and measurement instruments manufactured to the highest quality standards for the process industry and OEM applications.

Posted by Industrial-Manufacturing at 04:08 AM | Comments (0)

Despatch Industries Expands Global Photovoltaic Market Share

Despatch Industries, the leading process technology provider for the solar industry, has achieved another sales milestone in 2008. By the beginning of the third quarter of 2008, Despatch has received more than fifty percent more orders for their flagship firing furnace than they received in all of 2007.

Minneapolis, Minn (PRWEB) October 6, 2008 -- Despatch Industries, the leading process technology provider for the solar industry, has achieved another sales milestone in 2008. By the beginning of the third quarter of 2008, Despatch has received more than fifty percent more orders for their flagship firing furnace than they received in all of 2007.

"Exceeding our orders over last year by fifty percent in the third quarter is a great achievement for us," says Steve Oman, Despatch Director of International Sales and Business Development. "Our firing furnace continues to hold the number one market share worldwide and we are always working toward enhancements that will extend our market share in this industry."

In addition to the firing furnace, Despatch continues to see significant growth through the introduction of new products to the industry. At the recent Photovoltaic Solar Energy Conference and Exposition in Valencia, Spain Despatch introduced a new In-line Rapid Thermal Shock (IL-RTS) tool and a VOC Oxidizer package. The IL-RTS unit was developed in response to the industry's movement toward thinner wafers as an alternative to using low-bow pastes in wafers 200µm and thinner. The VOC Oxidizer will be available in 2009 for purchase with Despatch firing furnaces. The tool was designed to meet all global regulations for removing any gases emitted while running the firing furnace.

"Both of these products were met with great interest at the exhibition. Many customers stopped by our booth and commented that Despatch had the best product portfolio at the show," says Mr. Oman. "We continue to see success and gain market share by developing products that address the needs of the industry. Between all of the interest in our new products and our backlog of orders extending far into 2009, this is a great time of growth for Despatch."

Despatch Industries partners with solar industry leaders to provide the process technology expertise for integrated solutions that make solar power a viable and affordable energy option. Despatch is consistently recognized for exceptional performance and process quality, optimal cell efficiency, maximum equipment uptime and reduced operating costs.

For more information on Despatch visit our website: www.despatch.com

Posted by Industrial-Manufacturing at 04:07 AM | Comments (0)

METTLER TOLEDO StarterPac Installation Documentation

METTLER TOLEDO introduces StarterPac with all installations of industrial weighing equipment. StarterPac Installation Documentation provides a complete record of a weighing system's installation data for a customer's quality system.

Columbus, Ohio (PRWEB) October 6, 2008 -- METTLER TOLEDO introduces StarterPac with all installations of industrial weighing equipment. StarterPac Installation Documentation provides a complete record of a weighing system's installation data for a customer's quality system.

As part of every installation, a factory trained METTLER TOLEDO technician will complete a StarterPac Installation Report. This report features device information, environmental parameters, as well as initial calibration data. StarterPac is the newest example of the many value-added services that
METTLER TOLEDO provides to its customers using our professional installation program.

Global Service Network
As the global leader in the weighing industry, the METTLER TOLEDO service network guarantees quick response times and fast availability of spare parts. Our global service network provides competent support to you.

METTLER TOLEDO is a leading global supplier of precision instruments and is the world's largest manufacturer and marketer of weighing instruments for use in laboratory, industrial and food retailing applications. METTLER TOLEDO provides weighing solutions that help customers by automating processes, increasing yields, controlling product quality and complying with industry standards and regulations. Additional information about METTLER TOLEDO services can be found on the website at www.mt.com/service.

Posted by Industrial-Manufacturing at 04:07 AM | Comments (0)

Computers Unlimited and Element Payment Service Forge a Strategic Partnership

Computers Unlimited announces new functionality for its TIMS software product, allowing users to securely process electronic payment transactions through Element's PCI DSS compliant Express processing platform (http://www.elementps.com/merchants/our-security-edge-more/).

Billings, MT (PRWEB) October 6, 2008 -- Computers Unlimited (www.cu.net) has selected Element Payment Services, Inc (www.elementps.com), a leading provider of secure, innovative and reliable payment processing solutions, to provide a fully integrated solution for its TIMS software. This software enhancement allows users to accept, process and transmit payment card transactions through TIMS utilizing Element's PCI DSS compliant Express processing platform.

Element's Express processing platform handles one-time and recurring payment transactions and supports innovative security features such as offsite data storage and secure encryption hardware to protect sensitive cardholder information. "With cardholder data breaches on the rise, it's imperative to make security a priority. That's our commitment to our customers--secure payment processing," says Sean Kramer, CEO of Element.

Computers Unlimited is dedicated to providing their customers with best-in-class solutions to help them manage their businesses. "It wasn't enough to simply offer our customers the ability to process credit card transactions. We wanted to make sure that the partner we selected allowed our customers to easily comply with the Payment Card Industry Data Security Standards (PCI DSS). Element not only met but exceeded those requirements making it clear they were a superior solution," says Kevin Fichtner, manager of the development project.

The new TIMS Credit Card system was unveiled at Computers Unlimited's annual User's Group conference on September 8th, 2008. Unlike traditional upgrades that require users to wait for the next version of software, secure credit card processing is available immediately through a simple, one-time set-up.

About Computers Unlimited:
Located in Billings, Montana, CU provides integrated business management software and hardware solutions for the gas and welding supply, home medical equipment (HME/DME), home infusion and audiology markets. For more information, visit www.cu.net

About Element Payment Services:
Headquartered in Phoenix, Arizona, Element Payment Services Inc. provides PCI DSS compliant integrated transaction processing solutions to merchants through partnership with leading business management software providers. Engineered using service-oriented architecture, Element's Express processing platform allows for easy integration and supports credit and debit card, ACH and check solutions for its merchants.

Processing $4 billion in annual transaction volume, Element's secure, innovative and reliable payment solutions allow its customers to easily comply with industry security requirements such as PCI DSS, PA-DSS (PABP), significantly reducing the risk of a cardholder data breach. For more information, visit www.elementps.com

Posted by Industrial-Manufacturing at 04:07 AM | Comments (0)

Small Company Gambles on Obama, Announces Barack Obama Jack-in-the-Box Toy

Pop Art Creations, a small family-owned company, is taking another risk this Election Season with the introduction of Barack-in-the-box, a Barack Obama Jack-in-the-box toy. The company introduced us to Hillary-in-the-Box in May 2008, just before the the Senator bearing its likeness suspended her campaign. Disappointed, but not defeated, Pop Art Creations prepares to roll the dice again.

San Jose, CA (PRWEB) October 6, 2008 -- There's a lot of Change going on at Pop Art Creations, as the company prepares to gamble on a presidential candidate yet again. Heather Courtney and husband, David Manzo, co-founders of Pop Art Creations, emptied their 401K to finance the production of 1,200 Hillary-in-the-box toys, a Hillary Clinton jack-in-the-box, back in January 2008. It was risky business for the couple, for whom this was the first shot at mass-producing anything overseas. Production and shipping delays caused their precious cargo to arrive three days before Senator Clinton suspended her campaign. Nonetheless, the toys were selling, but at a much slower rate than expected. Since June 2008, the company has sold about 600 Hillaries, and was seeing nearly the same amount of requests for a Barack-in-the-box. Having exhausted all financial resources with the Hillary project, it wasn't possible for the company to take that risk without a helping hand. The angel investor came in the form of a Hillary-in-the-box customer who was so intrigued by the sales potential of an Obama model jack-in-the-box that he funded the whole venture.

While debuting their factory sample Barack-in-the-Box, and trying to move Hillary inventory in Denver during the DNC, Courtney and Manzo were inundated with requests for interviews and photos. The Denver People Examiner called Courtney "One of the Top 5 People at the DNC". "We sold a few Hillary boxes," says Courtney, "but the interest in the Barack one is amazing! We've gathered nearly 300 email addresses for the waiting list since we've been in Denver."

So they have a great product, some press coverage, and a ton of interest; now what? They wait. Barack-in-the-box is in production in China and is expected to arrive at Pop Art Creations' warehouse just before Election Day. It's another close call for the couple, but they have "Hope" for "Change" this time around.

Barack-in-the-Box is a light-hearted celebration of the man and his historic candidacy. Each side depicts a caricature of Obama in scenes of good old-fashioned Americana. Some images include: Obama's likeness added to Mount Rushmore and a "fist pump" with Lincoln, Barack and Michelle in an adaptation of the famous painting, "American Gothic", and Obama cannot tell a lie as George Washington with the cherry tree. Turn the crank to the tune of "Hail to the Chief", and out pops the man himself. Barack-in-the-Box was produced in a limited edition of 1,200 and retails for $29.95 and is available exclusively through the company's website.

Pop Art Creations was founded in 2003. Heather Courtney creates handmade, wooden jack-in-the-boxes that feature the likenesses of her customers, which she sculpts by hand. Her business hit a new level in 2006, when Ellen Degeneres featured Pop Art Creations, and her own Ellen-in-the-box, on her talk show. The work is all done by Courtney and each is one-of-a-kind. The Clinton and Obama jack-in-the-boxes are the first mass-produced products for the small company.

http://www.barack-in-the-box.com

Posted by Industrial-Manufacturing at 04:05 AM | Comments (0)

Distron Corporation Achieves ISO 13485 Medical Device Certification

Distron Corporation achieves the certification to an internationally recognized management system standard developed by the International Organization for Standardization (ISO), is a requirement for the manufacturing of commercial medical devices.

Attleboro Falls, MA (PRWEB) October 6, 2008 -- Distron Corporation today announced successful certification to ISO 13485: 2003, Quality Management Standard for Medical Devices. Company President Robert Donovan personally thanked Mike Hayes, Director of Engineering and Quality for the firm, who coordinated the certification process. The certification to this standard, an internationally recognized management system standard developed by the International Organization for Standardization (ISO), is a requirement for the manufacturing of commercial medical devices.

Distron Corporation is a New England based electronic contract manufacturer of circuit boards and electro-mechanical assemblies. For forty years the company has provided manufacturing services to a wide variety of the electronic market sector including military, medical, industrial, and scientific instrumentation. The addition of ISO13485 along with its ISO 9001 certification strengthens Distron's commitment to customer quality and service and positions the company for further expansion in the medical device sector of the marketplace.

Currently, Distron is providing manufacturing services to OEMs engaged in ultrasonic imaging, pediatric defibrillators and pharmaceutical equipment. VP of Sales, Don Petry said, "Distron is well positioned to expand the service offering to other New England based medical device companies. We see the medical device market segment propelling Distron's growth into the next decade."

Posted by Industrial-Manufacturing at 04:05 AM | Comments (0)

Valuable Patents with Broad Applications in the 3G and WiMax Arenas to be Sold at October 30th Auction

Carlson Wireless Technologies, Inc. will be offering for sale three patents with broad application in the WiMax and 3G arenas at The Ocean Tomo Live IP Auction in Chicago on October 30. US Patents 5,959,982; 6,693,890; and 5,745,480 are all directed to the field of telecommunication and will be offered as Lots 59, 60 and 61, respectively.

Arcata, CA (PRWEB) October 6, 2008 -- Carlson Wireless Technologies, Inc. announced today that it will be offering for sale three patents with broad application in the WiMax and 3G arenas at The Ocean Tomo Live IP Auction in Chicago on October 30. US Patents 5,959,982; 6,693,890; and 5,745,480 are all directed to the field of telecommunication and will be offered as Lots 59, 60 and 61, respectively.

Carlson Wireless is taking this opportunity to auction these particular patents to generate capital that will assist in the development of its next generation of their product line. These patents have generated a significant amount of interest due to their potential applications in the WiMax and 3G standards. Potential licensees include Wireless Service Providers, Wireless Hardware Manufacturers, Wireless Telecommunications Providers and Cell Phone Equipment Manufacturers.

"Currently the direction we are taking with our product line is in a specialized market and we won't likely be able to gain the embedded value these patents might offer," said Jim Carlson, founder and CEO. "We believe that another better suited company will find value in these patents that have such a broad application in the WiMax and 3G arenas. Our business model has us expanding into WiMax and 3G when the technology matures to meet our market niche and so for now it seems appropriate to have someone else have a go at it."

US Patent 5,959,982 discloses a method and apparatus for a simple and efficient adaption of a Time Division Duplex device for propagation delay, thus synchronizing the slave clocks in a wireless system. US Patent 6,693,890 provides a method for improving the functionality of a code division multiple access system by quickly acquiring signal timing. US Patent 5,745,480 provides a method for duplexing wireless network bandwidth, to provide channels to accommodate the various bandwidth needs of users.

With approximately $100M in transactions closed to-date, Ocean Tomo Auctions (www.oceantomo.com/auctions.html) has received global recognition as the premier forum for the live auctioning of intellectual property assets. The firm holds multiple live auctions annually in Europe, Asia and the United States, benefiting sellers such as C-level executives, Fortune 500® IP and business professionals, individual inventors, SMEs and investors. Hundreds of key decision makers in the intellectual property, technology and financial communities attend and participate in the two-day auction events. Ocean Tomo Auctions has been featured on CNBC, Bloomberg TV, The Wall Street Journal, Barron's, Red Herring, BusinessWeek, Reuters and many other media outlets.

For more information on any of these Lots or to register to bid at the Ocean Tomo Fall 2008 Live IP Auction, please contact us directly at 312.377.4851 or auctions@oceantomo.com or visit www.OceanTomoAuctions.com.

About Carlson Wireless Technologies

Carlson Wireless Technologies (www.carlsonwireless.com), a microwave radio manufacturer located in California, designs and develops wireless telecommunications and broadband equipment for domestic and international markets. CWT is the leader in the field of fixed and low latency microwave signaling. Incorporating the company's exclusive TrueTDM technology plus IP Carlson's robust point-to-point digital radios provide simultaneous wireless links for telephone, leased lines and Ethernet data.

Posted by Industrial-Manufacturing at 04:05 AM | Comments (0)

Hawker Beechcraft Introduces the Next-Generation Hawker 450XP Light Business Jet

The best light jet value in the world gets even better -- enhanced performance, cabin and technology

Orlando, Fla. (Vocus/PRWEB ) October 5, 2008 -- Hawker Beechcraft Corporation (HBC) today announced the launch of its newest light business jet -- the Hawker 450XP. Building from the world's most successful fractional aircraft, the Hawker 400XP, the new Hawker 450XP will receive the most comprehensive product upgrade in light jet history. The four key areas of upgrades include:

* All new engines that deliver 10 percent better fuel economy -- the perfect antidote to today's rising fuel costs
* The world's most advanced infotainment system via the new Rockwell Collins Venue™ integrated Cabin Management System
* New more luxurious interior -- based on the interior of the 900XP, it's the most comfortable, most elegant and best equipped cabin ever offered in a light jet
* All new avionics -- Rockwell Collins Pro Line 21™ integrated avionics elevates the pilots' awareness, knowledge and capabilities

"We have listened to our customers and are extremely proud to produce an aircraft that improves on what is already the world's best in fractional aircraft," said Jim Schuster, Hawker Beechcraft chairman and CEO. "We've taken what makes the Hawker 400XP a tremendous success and built upon it with more efficient engines, new interior and the most up-to-date avionics -- providing the best light jet value for our customers worldwide. The Hawker 450XP's improvements ensure that it will continue to lead this dynamic market segment in safety, performance and popularity."

Created in direct response to requests from HBC's loyal customers, the class-leading Hawker 450XP boasts longer range, faster climbs, lower operating costs, improved high and hot field performance and enhanced technology over its predecessor Hawker 400XP. Highlighting the largest cabin and largest cockpit when compared to its closest straight wing jet competitor, the Hawker 450XP will offer a standard eight-place, center-club seating arrangement with a private lavatory. The light jet provides an impressive combination of comfort, speed and technology, designed for the most productive business travel.

Superior Performance
Delivering unprecedented performance and efficiency, the Hawker 450XP will feature all-new Pratt & Whitney Canada PW535D turbofan engines, providing 10 percent better fuel efficiency. The PW535D engine is equipped with a full authority digital engine control (FADEC) and comes with a 5,000-hour Time Between Overhaul (TBO). Each engine provides 2,965 pounds of thrust, flat rated to ISA+20°C, which is eight degrees higher and 1,400 hours longer than the 400XP's JT15D-5R engines.

The Hawker 450XP also boasts a long range cruise speed improvement from the Hawker 400XP's 414 knots (476 mph) to 421 knots (486 mph). The maximum take-off weight (MTOW) will increase from the 16,300 pound limit found on the Hawker 400XP to 16,650 pounds, allowing operators to carry an additional 350 pounds of fuel at maximum payload.

The Hawker 450XP's increased efficiency translates into better range and payload performance under all aircraft loading and airfield combinations. For example, on a standard sea-level day the Hawker 450XP with four passengers provides a range of more than 1,600 nautical miles with NBAA IFR reserves (with a 100 nautical mile alternate) -- nearly a nine percent improvement over the 400XP. Under high and hot conditions, the range and payload improvement becomes even greater as the benefits of the higher flat rated engines are realized. Departing a 5,000 foot elevation airport at 25°C (77°F), the 450XP will yield a four passenger range of more than 1,600 nautical miles or a 24 percent improvement over the 400XP. Climb performance also improves, with the time needed to reach FL370 minimized from 18 to 14 minutes, ensuring more efficient Air Traffic Control (ATC) operations and direct routing, saving business travelers time and money.

Luxurious All-New Interior & Sophisticated Cabin Management System
Extending from the Hawker 400XP's reputation as the largest cabin of any comparable aircraft, the Hawker 450XP introduces a fresh, new Hawker interior, modeled after the Hawker 900XP's sophisticated quality and styling. Among the cabin's many upgrades are totally redesigned cabin seats with waterfall headrests, refinished cabin sidewalls and ceiling in softer and more luxurious leathers and fabrics, enhanced LED downwash lighting and optional seat warmers to provide the most-comfortable, most-elegant and best-equipped cabin ever offered in a light jet. The superior cabin offers a variety of features that are usually extra-cost options on competitive aircraft, like dual-zone climate control for optimum passenger comfort and a fully berthable center-club seating. A newly designed refreshment center maximizes space with hot/cold liquid and ice storage.

The new Rockwell Collins Venue™ high-definition cabin management and infotainment system will also be incorporated into the Hawker 450XP, allowing individual passengers to utilize their personal electronic device of choice to catch up on work or enjoy a customized in-flight entertainment system. The package has the capability to deliver a high-definition, home-theater audio and video experience from CDs, MP3s and XM Satellite Radio. The system also has individual power outlets and USB connectors that connect to a laptop, iPod®, iPhone® or nearly any piece of technology brought on board. A 10-inch, swing-out individual high-definition monitor in the club seating area and aft side of the forward cabinet are also available.

New Advanced Rockwell Collins Pro Line 21 Flight Deck
The Hawker 450's cabin won't be the only area to offer the latest in technology and functionality. The totally upgraded flight deck will also deliver an advanced level of enhanced safety and performance with the fully-integrated Rockwell Collins Pro Line 21™ avionics suite, the same system found in the larger Hawker business jets. The fully digital Pro Line 21 system elevates pilots' awareness, knowledge and capabilities to a higher level, featuring three 8-by-10 inch large-format active matrix liquid-crystal displays as well as digital radio and audio systems.

The Pro Line 21 standard avionics installation in the Hawker 450XP will also incorporate dual Flight Management Systems (FMS) and Wide-Area Augmentation System (WAAS)-enabled receiver that enable Localizer Performance with Vertical Guidance (LPV) approaches, solid state weather radar and Rockwell Collins patented Chart Link™ automated chart selection system to greatly reduce pilot workload. An Integrated Flight Information System (IFIS) will offer pilots a wide range of tools to enhance flight safety and pilot situational awareness, including map overlays (airways, airspace, geopolitical) and Electronic Jeppesen charts. In addition to these standard systems, IFIS options include U.S. or worldwide graphical weather.

First flight of the aircraft is scheduled for Q2 2009 with FAA Certification planned for Q2 2010. European Aviation Safety Authority (EASA) certification is expected in Q3 2010.

Hawker Beechcraft Corporation is a world-leading manufacturer of business, special-mission and trainer aircraft -- designing, marketing and supporting aviation products and services for businesses, governments and individuals worldwide. The company's headquarters and major facilities are located in Wichita, Kan., with operations in Salina, Kan.; Little Rock, Ark.; Chester, England, U.K.; and Chihuahua, Mexico. The company leads the industry with a global network of more than 100 factory-owned and authorized service centers. For more information, visit www.hawkerbeechcraft.com.

This release may contain "forward-looking statements" within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. All statements, other than statements of historical fact, including statements that address activities, events or developments that we or our management intend, expect, project, believe or anticipate will or may occur in the future are forward-looking statements. Forward-looking statements are based on management's assumptions and assessments in light of past experience and trends, current conditions, expected future developments and other relevant factors. They are not guarantees of future performance, and actual results may differ significantly from those envisaged by our forward-looking statements. Among the factors that could cause actual results to differ materially from those described or implied in the forward-looking statements are general business and economic conditions, production delays resulting from lack of regulatory certifications and other factors, competition in our existing and future markets, lack of market acceptance of our products and services, the substantial leverage and debt service resulting from our indebtedness, loss or retirement of key executives and other risks disclosed in our filings with the Securities and Exchange Commission.

Press contact:
Andrew Broom
+1.316.676.8674
+1.316.516.4158 Mobile
andrew_broom@hawkerbeechcraft.com
www.hawkerbeechcraft.com

Posted by Industrial-Manufacturing at 04:04 AM | Comments (0)

Hawker Beechcraft Corporation Goes Hi-Tech, Hi-Def with New Beechcraft King Air 350i

The world's most legendary turboprop is now the world's most advanced

Orlando, Fla. (Vocus/PRWEB ) October 5, 2008 -- Hawker Beechcraft Corporation (HBC) today announced the new Beechcraft King Air 350i -- a dramatic technological leap forward for what is the most successful turboprop family of all time. The new King Air 350i sets all-new standards in cabin luxury, entertainment and flexibility and is now the greenest choice available to business travelers. The new King Air 350i delivers unmatched fuel efficiency and the lowest operating cost per seat mile making it the greenest business aircraft available today. The King Air 350i was launched at the 2008 National Business Aviation Association (NBAA) Annual Meeting and Convention in Orlando.

The new Beechcraft King Air 350i highlights four key areas of interior upgrades:

* The Most Advanced Infotainment System in the Business -- Rockwell Collins Venue™ integrated Cabin Management System (CMS) featuring video screens, iPod connectivity and much, much more
* Category-Busting Cabin -- Re-designed with an emphasis on luxury, passengers will think they have stepped into an aircraft costing many millions more
* A New Standard of Quiet -- An exclusive multi-step noise reduction process drops sound levels by 4 dBA making the King Air 350i quieter than many competitive jets
* Revolutionary new Beechcraft FlexCabinTM capability -- a whole new way of reconfiguring the cabin, dramatically increasing mission flexibility.

"The new King Air 350i completely transcends typical market segmentation. It will continue to provide the full fuel, full seats, full baggage capability the King Air 350 has always been known for, and now will incorporate a totally new interior that is unmatched by any turbine business aircraft in its price range -- jet or turboprop," said Jim Schuster, chairman and CEO of Hawker Beechcraft. "Utilizing a platform that is already one of the most efficient and environmentally-friendly in our industry to create an aircraft that beats the competition in both cabin system technology and mission flexibility further solidifies our company's global leadership in business aviation."

The King Air 350i will be the first turboprop aircraft on the market to sport the new Rockwell Collins Venue™ cabin management system. The system supports multiple Personal Entertainment Devices (PEDs), including DVD, CD and MP3 player, Apple iPod®, Sony PlayStation and Xbox 360 gaming consoles, laptop computer, digital and video camera, USB data-storage devices and future HDMI devices.

"The focus with the King Air 350i was integrating cabin functionality and flexibility into an aircraft that has unmatched mission flexibility. The King Air 350i is without a doubt the world's best 'go anywhere, do anything' business aircraft," said Brad Hatt, HBC president, Commercial Sales. "And now it also has the most advanced cabin management system available of any aircraft near its price point."

The new CMS system features a 15.3-inch swing-out monitor in the forward entertainment cabinet with wide-screen display showing digital hi-definition video and entertainment. High-definition screens at each seat location can be added. Nine programmable switch panels control the Blu-ray disk, CD and MP3 Player, audio and video jukebox, 3-D Airshow moving map and flight information. Cabinets are also equipped with standard USB charging ports and docking station for travelers' Blackberry, cell phone, camera and iPod.

In addition to enhancements in the cabin management system, Beechcraft King Air's trademark flexibility has now been stretched even further. The King Air 350i's new state-of-the-art interior features Beechcraft FlexCabin capability, enabling the owner to mix-and-match or remove aft club components including optional ottomans for either aft facing or forward facing seats. In the end the entire aft club seating area can be reconfigured to meet the specific needs of travelers' mission that day.

The King Air 350i's ultra-modern cabin is also an entirely new design that compliments the advanced flexibility and new technology debuting in the aircraft. The sleek interior design was modeled after the Premier IA, which has been extremely well-received in the market and spotlights the unparalleled cabin capabilities at its price point. The updated interior includes all-new headliner, seat tailoring and tables, electrochromic window darkeners, LED lighting, increased legroom, and optional seat warmers. In addition, the King Air 350i includes an optional vanity in the aft lavatory area that incorporates a variety of toiletry storage areas, running water, automatic LED lighting and dual mirrors, and is located next to the King Air 350i's in-flight accessible baggage area for total passenger privacy and convenience.

In addition to advanced interior capabilities, the King Air 350i is now the quietest King Air ever. Cabin sound levels have been greatly reduced to an average of 78 dBA, equal to or better than competitive business jets.

First flight of the King Air 350i is scheduled for October 2008 with FAA Certification planned for Q3 2009. The first delivery will take place Q4 2009, and European Aviation Safety Authority (EASA) certification is expected in Q1 2010.

Press contact:
Andrew Broom
+1.316.676.8674
+1.316.516.4158 Mobile
andrew_broom@hawkerbeechcraft.com
www.hawkerbeechcraft.com

Posted by Industrial-Manufacturing at 04:04 AM | Comments (0)

Ways to Use USB in Embedded Systems

Micro Digital has recently released a helpful white paper concerning how to use USB in Embedded Systems. The paper, written by Yingbo Hu, R&D Embedded Software Engineer, and Ralph Moore, President, presents 11 methods to use USB in embedded systems.

(PRWEB) October 5, 2008 -- As the article states in its conclusion, "USB usage in embedded systems so far has been largely centered on dealing with the loss of serial and parallel ports on PCs and laptops, the loss of parallel interface printers, and with capitalizing on the low cost and convenience of USB thumb drives for transporting information. However, as we hope this article has shown, USB offers many other capabilities that are available to solve other problems in the embedded space. We expect to see these uses grow in the future."

The description of each method consists of a block diagram showing how software and hardware functional blocks connect together and a description of how the subsystem operates. Examples are: PC to Device via USB Serial, PC to Device via USB Disk, Web Server Access via RNDIS (Ethernet over USB), USB Multi-port Serial Device, USB Thumb Drive Support, USB to WiFi, and Connection to Multiple Sensors and Actuators. The article also provides a general introduction to USB.

According to Mr. Moore "Most embedded engineers I talk to do not understand USB. This article is intended to help them better understand how it works and how to apply it. We hope it will be a useful contribution to the embedded space." The article is posted on Micro Digital's website at http://www.smxrtos.com/articles/usb_art/waysusb.htm.

About Micro Digital
Micro Digital, Inc. has been in the embedded systems business for over 30 years and has been producing and selling embedded software products for 19 years. The company is dedicated to providing quality products and support for embedded systems at moderate prices.

Trademarks used above are the properties of their respective owners

Posted by Industrial-Manufacturing at 04:03 AM | Comments (0)

September 2008: Record sales for Swiss Watchmaker Frédérique Constant

September, already the record month in 2007, was closed with 18% growth in 2008

GENEVA (Business Wire EON/PRWEB ) October 5, 2008 -- “We are proud to have reached our best month ever this September and it proves that our product proposition – accessible luxury – continues to have great potential. The initial concept behind the brand was to create Swiss Made, high quality and innovative watches at sensible prices. Still today, it is this mission that drives our passion. We would like to take the opportunity to thank our worldwide partners for their continuous support for Frédérique Constant,” says Peter Stas.

With continued stable sell-out in most areas and strong expansion in countries in The Middle East, Russia and Asia, Frederique Constant expects to reach again a substantial growth by the end of 2008. With an impressive growth rate between 25 and 35% over the past twelve years, the Geneva-based brand created a solid position within the Swiss watch industry.

About Frédérique Constant

Frédérique Constant is an independent family owned watch manufacturer based in Plan-les-Ouates, Geneva. The company is involved in all stages of Watch Production, from initial design to final assembly and quality control. Frédérique Constant watches are defined by their high quality, differentiation and precision in design and manufacture. Frédérique Constant has a passion for design of beautiful watches. Their perceived value — through quality of design, materials, and manufacture — is a key component of its success. Each watch is assembled by hand and extensively controlled with latest equipment to ensure maximum quality. The company innovates to offer creativity and exceptional value. Its 3200 square meters factory in Plan-les-Ouates Geneva is ultra modern and offers the best environment for its passionate watchmakers. Production will reach 100’000 timepieces in 2008. More information can be found at www.frederique-constant.com or blog.frederique-constant.com.

MULTIMEDIA GALLERY

http://www.businesswire.com/cgi-bin/mmg.cgi?eid=5795846

Posted by Industrial-Manufacturing at 04:02 AM | Comments (0)

Pegg-Whitney Woodworks Announces Launch of New Company Website

Minneapolis- Pegg-Whitney Woodworks, LLC announced today that it has launched its newly designed website. The Company intends for the site to provide potential clients with a deeper understanding of the work provided by Pegg-Whitney as well as allow the public to learn about quality craftsmanship in woodworking.

Minneapolis, MN (PRWEB) October 5, 2008 -- Pegg-Whitney Woodworks, LLC announced today that it has launched its newly designed website. The Company intends for the site to provide potential clients with a deeper understanding of the work provided by Pegg-Whitney as well as allow the public to learn about quality craftsmanship in woodworking.

"After 25 years in business we knew it was time to give potential clients a professional website to learn about our company, our products and ask us any woodworking related questions they may have," said Roger Pegg, president and CEO of Pegg-Whitney Woodworks. "We provide superior products and this website will enable us to relay that information to both homeowners and companies within the industry."

The Company has stated that the website is designed primarily for the exchange of information between the Company and the end user. The site allows the end user to view samples of the Company's work, learn about the Company's management team and view testimonials from past clients. Because of the custom products Pegg-Whitney Woodworks provides, the website does not support electronic commerce at this time.

About Pegg-Whitney Woodworks, LLC

Pegg-Whitney Woodworks, LLC, a Minnesota company, is the Twin Cities' premier manufacturer of custom, hand-made wood doors and windows. Pegg-Whitney Woodworks produces original designs, replicates existing pieces and works closely with clients to design completely unique items. The Company's headquarters and manufacturing plant are located in Minneapolis, Minnesota and the Company provides work throughout the United States and Canada. The Company's new website is located at
www.Pegg-Whitney.com.

Contact:
George Pegg
612-782-1852

Posted by Industrial-Manufacturing at 04:02 AM | Comments (0)

Artisan™ Series Chosen as Top 50 Most Innovative New Product

Professional Remodeler magazine selects AMSCO Windows' Artisan Series for honor

Salt Lake City (PRWEB) October 5, 2008 -- October 3, 2008 - Professional Remodeler magazine has recently named AMSCO Windows' new Artisan™ Series as one of its 50 Most Innovative New Products for 2008. The magazine featured the unique and innovative new window line in its September issue. The program recognizes technological advances in the residential building market.

The new Artisan Series creates a beautiful appearance by combining unique design with energy efficiency. Featuring a distinctive beveled-in profile, innovative hidden accessory grooves, breakthrough color technology and one of the industry's first magnetic action locks, the Artisan Series is specifically designed to make your home a masterpiece.

The magazine award serves to recognize new products that feature technological advancements that put a product ahead of its competitors; a new product line introduction or significant product improvement such as a categorical shift in the product's structure or features; and other innovations that increase the competition of a product line in the marketplace.

"We are honored by Professional Remodeler's recognition of Artisan Series and its unique design and innovative color technology for its Top 50 Innovative New Products issue," said Kyle Hendren, product marketing manager for AMSCO Windows. "We've spent more than a year developing and testing the product and are convinced the new technology provides Artisan Series with the best, durable two-tone color option on the market today."

The breakthrough technology of the Artisan Series allows for additional color options far superior to paint. The integral color layer is highly scratch-resistant resulting in fewer callbacks. The color cap is highly durable, fade resistant and won't crack, chip, flake or chalk like paint.

"We designed the new Artisan Series window specifically for the remodel and retrofit markets as well as for upper-end new construction," said Steve Sullivan, director of marketing for AMSCO. "Through our research we found that homeowners are looking for aesthetics that go beyond flat white rectangles. The unique beveled-in design and new exterior color options add architectural interest to the windows, which home owners desire."

The Artisan Series is available in mono colors white, almond and taupe plus the new exterior colors autumn red, evergreen and bronze with a white interior. The new Artisan Series with standard CōzE™ performance glass is available in many styles, colors and options for both new construction and remodeling projects and comes with a lifetime warranty. Visit the Artisan Series web site at www.amscowindows.com/artisanseries.asp to learn more about the new window line and its breakthrough color cap technology.

50 Most Innovative New Products were featured in the September 2008 issue of Professional Remodeler magazine and can be viewed on www.ProRemodeler.com.

About AMSCO Windows
Headquartered in Salt Lake City, Utah, AMSCO Windows has a strong heritage of providing innovative products and services for dealers, builders and homeowners for more than 50 years. As a growing company setting the pace for the emerging composite window industry, AMSCO prides itself on adding aesthetics and functionality to a homeowner's most prized possession - their home. For more information, please visit www.amscowindows.com or call (888) 82-AMSCO.

Posted by Industrial-Manufacturing at 04:01 AM | Comments (0)

Force Tester Sets the Seal of Quality at British Gaskets

British Gaskets, a major manufacturer of gaskets and sealing products have chosen a Mecmesin MultiTest 10-i force testing system to perform material testing on their rubber and ploymer materials for quality control purposes.

Slinfold, UK (PRWEB) October 4, 2008 -- British Gaskets, a major manufacturer of gaskets and sealing products have chosen a Mecmesin MultiTest 10-i force testing system to perform quality control assessments on their supplied materials.

The MultiTest 10-i is used to conduct tensile tests to find the elongation limit and tensile strength of the rubber and polymer materials, with reference to BS 903-A2:1995. Rubber dumbell samples are placed between 2 spring loaded fold grips and stretched until the material breaks. The MultiTest 10-i, driven by Mecmesin's powerful Emperor™ software provides fully automated control of all test parameters and the test results are displayed graphically within the software, showing clearly at what point the material breaks during the test. British Gaskets chose the MultiTest 10-i as a cost effective alternative to outsourcing their materials testing process.

Michael Hubbard, Business Quality Manager at the British Gaskets Group said "We use the Mecmesin MultiTest 10-i system to perform regular quality control tests to guarantee the quality of our supplied materials. Mecmesin provided us with a cost-effective solution to our needs and exceptional customer service. I would have no hesitation in recommending them to other companies with materials testing requirements."

Posted by Industrial-Manufacturing at 04:00 AM | Comments (0)

Wrabacon Inc. Manufactures Stainless Steel Packaging Line for Ocean Spray - This Line Will Transport Cranberries, Which are Cleaned, Inspected, & Sorted

Wrabacon Inc. manufactures stainless steel packaging line for Ocean Spray. This line will consist of stainless steel conveyor equipment to transport fresh cranberries received from the bogs, which are cleaned, optically inspected, sorted, and sent directly to 7 vertical bagging machines.

Oakland, ME (PRWEB) October 4, 2008 -- Wrabacon Inc. manufactures stainless steel packaging line for Ocean Spray. This line will consist of stainless steel conveyor equipment to transport fresh cranberries received from the bogs, which are cleaned, optically inspected, sorted, and sent directly to 7 vertical bagging machines.

When Ocean Spray Cranberries, the nation's largest cranberry processor decided to expand its production and packaging of its dried cranberry products, they turned to Selecpac Inc., a Wisconsin based system integrator of package machinery.

Selecpac founded in 1998 by Kim Dax, has been providing packaging solutions to many of the nation's largest manufacturers of consumer goods. His vast experience in providing the proper packaging machinery along with Wrabacon Inc. 20 year experience in manufacturing stainless steel conveyors convinced Ocean Spray to award the first of several craisin packaging line to Selecpac.

During several preliminary meetings with Kim Dax of Selecpac and Bob Lowder of Ocean Spray a scope of project was developed to insure that the proper packaging and conveying equipment was specified to meet the rates that were required to maintain a steady flow of product from the production/process area to the packaging line. Once a scope of project was determined Kim Dax, of Selecpac developed a series of drawings which placed the packaging machinery and conveyors in the proper location on the packaging floor. Once the drawings were approved by Ocean Spray a written specification for the conveyors were sent to Rob Bartlett, VP of Engineering at Wrabacon, Inc. After review by Bartlett the specifications were sent to a one of the CAD/CAM designers. The designer then prepared manufacturing drawings which would be used by the manufacturing team at Wrabacon.

The packaging line components consisted of a box erector, bag in bag inserter, vertical weigh scale, top taper, check weigher and labler. All connected via Wrabacon stainless steel conveyors.
Wrabacon Inc. manufactured the packaging line stainless steel wash down duty conveyors to the Ocean Spray specification for cleanliness and sanitation. All conveyors were manufactured with wash down duty components including motors, drives bearings and plastic belting. Once the conveyors were completed they were set up in the Wrabacon Inc. manufacturing facility for a Factory Acceptance Test by Selecpac. Upon completion of the FAT the conveyors were crated and shipped to the Ocean Spray facility in Wisconsin Rapids, WI, where they were integrated into the packaging line.

Selecpac provided installation of the packaging machinery along with the Wrabacon conveyors. Again "Selecpac provided an on time and trouble free packaging line for Ocean Spray", according to Bob Lowder, VP Engineering of Ocean Spray.

As of this writing Selecpac and Wrabacon Inc., have been contracted by Ocean Spray Cranberries to provide stainless steel process and packaging line conveyors for their Middleboro, MA facility. This line will consist of stainless steel conveyor equipment to transport fresh cranberries received from the bogs, which are cleaned, optically inspected, sorted, and sent directly to 7 vertical bagging machines.

Posted by Industrial-Manufacturing at 03:59 AM | Comments (0)

Setpoint to Bring Lean Manufacturing to Army Ammunition Plant

Setpoint Systems, Inc., an industrial automation integration firm, has been selected to modernize the back-end manufacturing process for 7.62mm ammunition cases for ATK's Lake City Army Ammunition Plant (LCAAP).

Ogden, Utah (PRWEB) October 4, 2008 -- Setpoint Systems, Inc., an industrial automation integration firm, has been selected to modernize the back-end manufacturing process for 7.62mm ammunition cases for ATK's Lake City Army Ammunition Plant (LCAAP). Setpoint's winning proposal (prepared with assistance from McKinnon-Mulherin, Inc.) describes how their solution to incorporate lean manufacturing principles will increase plant efficiency, increase output, reduce costs, and radically improve product quality.

For the past 60 years, the LCAAP has produced ammunition cases for the U.S. armed forces using manufacturing equipment originally built in the 1940s. The U.S. government and ATK (the private company who manages the plant) realized that the time had come to modernize this manufacturing process.

Setpoint gave ATK the perfect modernization solution through "lean" manufacturing. Lean manufacturing is based on the Toyota Production System (TPS) methodology, which breaks manufacturing processes down into multiple, compact workcells rather than using the enormous manufacturing lines common in the 20th century.

"Lean [manufacturing is what we do. The system that we're going to build for the Lake City plant is going to make their process better in every way--safer, more efficient, less expensive, higher quality. Lean is where manufacturing is headed, and we're excited to help LCAAP modernize," said Clark Carlile, Setpoint's V.P. of Sales and Marketing.

Setpoint's solution for LCAAP involves identical but independent workcells. Each workcell can manufacture all the required products, but the workcells are easier and faster to maintain than current processes, increasing production uptime by 90 percent.

The lean workcells reduce part handling and part transportation, which reduces the risk of damage and errors. Greater automation saves ATK labor costs and improves worker safety. Most importantly, Setpoint's solution incorporates in-process inspection and error-proofing to improve the quality of the overall product. This creates more reliable equipment for the soldiers who ultimately use the ammunition.

Setpoint provides engineering services specializing in the design, build, and controls programming of turn-key custom automated solutions. Setpoint has more than 16 years of experience designing and building lean automated solutions for a wide range of manufacturers. All of Setpoint's employees have been trained in the TPS methodology and have direct experience with some of the most discerning manufacturers practicing lean manufacturing principles today.

McKinnon-Mulherin, a strategic communication and information design firm, helped Setpoint develop their proposal. Since 1997, McKinnon-Mulherin has helped leaders in the financial services, information technology and telecommunications industries improve their productivity and profits with better training and documentation.

Posted by Industrial-Manufacturing at 03:59 AM | Comments (0)

FileWorks™ Receives Intel® Certified Logo

Intel Certified solution offers secure ,Web-based document management and file sharing for business. Certification demonstrates to prospective customers that FileWorks Online™ has been tested for security vulnerabilities and has met pre-defined standards for quality, security, and performance. Free trial of FIleWorks Online at http://www.fileworks.com/Intel.

Incline Village, Nev. (PRWEB) October 3, 2008 -- FileWorks™ announced FileWorks Online™, the company's secure online document management site, has been awarded the Intel® Certified Powered by SpikeSource logo through participation in the Intel® Certified Solutions Program.

The Intel® Certified Solutions Program provides independent testing for security, interoperability, and enablement on Intel® processor family-based platforms. This certification demonstrates to prospective customers that FileWorks Online™ has been tested for security vulnerabilities and has met pre-defined standards for quality, security, and performance, giving them greater peace of mind in choosing to deploy the solution.

FileWorks Online™, a virtual file cabinet, makes files accessible through an easy-to-use website and provides companies the ability to securely share files internally and externally. A free trial with no credit card required is available at http://www.FileWorks.com/Intel.

"Companies need to be concerned about the security of their data," said Len Mayo, Business Development Manager at FileWorks™. "Studies show that most organizations do not adequately protect confidential or regulated files and documents. In one report, 81 percent had misplaced at least one laptop with sensitive or confidential business data in the past year. With FileWorks Online™, companies can control access to files, thereby protecting their data."

FileWorks Online™ starts at $29.99/month. At less than the cost of a cup of coffee per day, the system is affordable for any size business. It expands as a company grows, allowing for additional users, storage and branding features.

"Small- and medium-sized businesses depend on Intel technology to stay competitive," says J. Scott Harrison, director Partner Programs Organization for Intel Software and Service Group. "For those businesses, we hope the Intel brand is a symbol of assured quality and that when they see the Intel® Certified logo, they know that it's a solution that they can trust."

FileWorks Online™ helps companies implement a digital-based system, often referred to as a "paperless office." Last month, FileWorks™ partnered with Kodak Document Imaging Products to provide complete scanning and document management solutions for businesses to move to a digital-based environment.

About FileWorks™
Since 1997, FileWorks™ has provided secure document management solutions for regulated industries, such as healthcare, where data security is critical. iFile™, the company's flagship product, is an enterprise-wide, scalable software and hardware solution for imaging and workflow that allows controlled, auditable access to sensitive data. FileWorks Online™ provides online document management and secure storage for any size company without requiring capital investment in servers and equipment.

Posted by Industrial-Manufacturing at 03:58 AM | Comments (0)

One Size Reusable Diapers Sales Continue To Soar Sales Increase for Company During Questionable Economic Times

Sales Increase for Company During Questionable Economic Times. Over 4 million dollars in sales of reusable cloth diapers since company started.

San Diego, CA (PRWEB) October 3, 2008 -- MLB Industries Inc, dba Happy Heiny's is pleased to announce that during these times of economic crisis and fears sales continue to soar. Many families are feeling the pinch at the grocery store and they are trying to cut back in any way that they possibly can. The cost savings and ease of using reusable cloth diapers are starting to make many moms and dads think twice about using disposable products.

MLB Industries has been in business since January of 2002 and since the beginning they have witnessed a growth of 30% or more per year. This year they are looking at closer to a 40% increase in growth. With over 4 million dollars in sales since the company started, no slow down is in sight or expected.

"The economics in using cloth diapers is actually very easy," states Linda Byerline, CEO and developer of Happy Heinys. "The cost of a single diaper from a big box store such as Costco is $.25 (this cost is far greater at the grocery store) and although as a single item this does not sound like much, it does add up over a child's diapering years. Most children will use 8760 diapers from birth to potty training costing a whopping $2190. Compare that to the purchase of just 24 one size reusable diapers at $409.32 parents have a savings of roughly $1780.68. This does not include the fact that these very diapers can be used for multiple children making the saving even greater."

"When it comes to cloth usage and the environment one of the biggest concerns is: What about increased water usage? The reality behind this question is that it actually takes 2.3 times more water to manufacture and use disposable diapers (1). When taking the environment into consideration we are frequently reminded how full our landfills are and the fact that each child will produce 1 ton of disposable diaper trash is astonishing. That is trash that takes 250-500 years to decompose (2)," explains Byerline.

Since there will always be babies, there will always be a need to make the cost of them a little easier to bear and with Happy Heinys so easily and widely available to parents they are working towards that goal. Happy Heinys are available in all 50 states as well as many countries including Israel, Singapore, UK, Hong Kong, Canada, Italy, Croatia, and many more.

About Happy Heinys: Happy Heinys was first opened in Jan. 2002 after the premature birth of the third child of Linda Byerline. It was a true invention of necessity. Over the last 7 years Happy Heinys has become one of the largest manufactures of modern day reusable cloth diapers and one of the most popular cloth diapers in Hollywood and among the world's favorite celebrity babies as well as the #1 rated reusable cloth diaper on the internet.

For more information on Happy Heinys or to find a retailer near you please visit their website at: www.happyheinys.com or call 619-258-6867 or 1-888-673-BABY. Editors Note: Please contact Linda Byerline at 619-261-6850 or Linda @ happyheinys.com for question, high res. Pictures, or interviews.

1 Armstrong, Liz and Adrienne Scott Whitewash: Exposing the Health and Environmental Dangers of Women's Sanitary Products and Disposable Diapers, What You Can Do About It. 1993. HarperCollins.
2 Link, Ann. Disposable nappies: a case study in waste prevention. April 2003. Women's Environmental Network.

Posted by Industrial-Manufacturing at 03:58 AM | Comments (0)

President Bush Meets with Bison Gear Chairman and Business Leaders on Economic Rescue Package

Ron Bullock expresses concerns about economy and need for financial rescue plan to pass in the House to prevent recession

St. Charles, IL (PRWEB) October 3, 2008 -- In his role as business owner, a Director of the National Association of Manufacturers (NAM), and Chairman of the Illinois Manufacturers Association (IMA), Ron Bullock and 12 other business leaders met with President Bush at the White House yesterday to personally discuss the state of the economy and the vital importance of the passage of the pending Economic Rescue Package by the House.

Bullock, owner and Chairman of gearmotor manufacturer Bison Gear & Engineering Corp., expressed concern for how tightening credit markets affect not only the ability of his customers to buy Bison products they incorporate into the equipment they build, but also how his customers' customers were finding it difficult to finance the new equipment, in addition to the difficulties Bison Gear might face in its growth plans and the security of its 275 employees.

"At Bison Gear, we always put lubrication in our gearboxes -- otherwise, gears would seize and stop working," said Bullock. "Capital and credit are lubrication for the financial markets, and we need to get them smoothly flowing again."

"The credit markets are in turmoil. Even healthy companies with solid balance sheets and order backlogs cannot obtain the routine financing they need to meet payroll and expand productive capacity," said NAM President John Engler.

In thanking the job creators who came to the White House, President Bush said, "... the bill that's before the House of Representatives .. is a bill that has got the best chance of providing liquidity, providing credit, providing money so small businesses and medium-sized businesses can function." The President added, "And I want to thank you all for going up and telling these members of Congress what's on your mind and how this affects your businesses at home, and how it affects the communities in which you live. This thing -- this issue has gone way beyond New York and Wall Street."

About Bison Gear & Engineering Corp.
Founded in 1960, Bison Gear & Engineering Corp. designs and manufactures fractional horsepower electric motors, gearmotors and gear reducers used in industrial and commercial OEM applications worldwide. Bison's strong engineering tradition, based on Robusticity (TM) principles, offers products with up to twice as much torque in the same package size as competitors. Bison employs over 270 associates in its St. Charles, Illinois facility which produces gearmotors and reducers in parallel shaft and right angle configurations, as well as AC and DC electric motors, for applications where dependability and long lifetimes are important.

Posted by Industrial-Manufacturing at 03:57 AM | Comments (0)

O/E Launches Safety-Impact.com

The Performance Improvement Firm Creates an Innovative Online Safety Community.

Troy, MI (Vocus/PRWEB ) October 3, 2008 -- O/E has launched a new Web site devoted to its revolutionary worker safety management system, SafetyIMPACT! The new site, www.safety-impact.com, details O/E’s innovative approach to managing worker safety.

"This concept grew out of the work we did with our customers; they really drove the design and development of our safety process" relates Rick Vlasic, CEO of O/E. “Throughout the implementation of SafetyIMPACT!, our customers would ask us how other organizations approached a given situation, so we decided to give them a forum to talk to each other.”

Much of the look, feel, and content came from O/E Director of Performance Improvement, Phil La Duke. "When Rick came to me and explained his idea for a Web site devoted to SafetyIMPACT!, it really got the creative juices flowing. Like the other O/E websites, this site was created entirely with internal resources. As our creative team began collaborating on the project, the ultimate vision for the site just kept getting better and better.”

The goal was to stand out from the other safety Web sites without sacrificing any of the functionality of the site. We tried to create a site that was a true resource for safety professionals while not taking ourselves too seriously.

Safety-Impact.com stands out not only because of its highly inviting design, but because of its structure as well. The site has three main purposes: 1) to promote SafetyIMPACT!, 2) to provide a user group for companies who have implemented SafetyIMPACT!; and 3) to create a safety professional’s resource room.

The site contains sample tools and templates that a prospective customer can review; a culture survey that people can use to assess their organization’s safety climate and needs; written and video testimonials from select customers; and a demo version of our hazard tracking database so people can test drive elements of the system.

“I think I’m most proud of the user group portion of the Web site,” says La Duke. “On this site we have discussion threads where our customers can share ideas, ask questions, and create a support system for each other. We have had excellent results in aerospace, heavy truck and bus manufacturing, hospitals, engine manufacturing, and more; this area allows someone from Daimler Truck to share ideas with Henry Ford Health System or Williams International. There’s a lot to be learned by sharing ideas across industries.”

SafetyIMPACT!
SafetyIMPACT! is a culture-based safety system designed to reduce worker injuries and lower costs through the implementation of six values and four practices common to the world’s safest companies. Central to this system is a proprietary database that records hazards, identifies the root causes of these hazards, and tracks them to correction. The philosophy that is the foundation of SafetyIMPACT! is that all injuries can be prevented by identifying and removing the hazards before workers are injured.

O/E Learning, Inc.
Established in 1984, O/E Learning designs and develops new training and performance improvement programs, as well as converts existing programs to different forms of delivery including Web-based, instructor-led, virtual classroom, CD/DVD, and mobile devices. O/E’s diverse services range from organizational development initiatives to professional certifications in safety, quality, and employee involvement. The privately held company is headquartered in Troy, MI. Leverage Life, a wholly owned subsidiary, is headquartered in Pleasanton, CA and focuses on providing corporate Concierge, Wellness, and Work/Life programs. Learn more about O/E at: www.oe.com.

Posted by Industrial-Manufacturing at 03:56 AM | Comments (0)

OMAX Corporation to Display Metal Forming & Fabricating Solutions at FABTECH 2008

OMAX® NEW 80X Large Format JetMachining Center will be showcased at FABTECH 2008. The 80X is the ideal waterjet cutting machine for large format metal, composites, and stone cutting applications.

Kent, Washington (PRWEB) October 3, 2008 -- OMAX® Corporation's booth at the 2008 FABTECH International & AWS Welding Show will showcase a variety of solutions ideal for metal forming and fabricating. The newly released 80X JetMachining® Center with Intelli-TRAX, one of the most accurate large format machines in the company's line of JetMachining Centers, will be featured alongside OMAX's Model 2652 with Rotary Axis in booth 3257. FABTECH will take place in the Las Vegas Convention Center in Las Vegas, Nevada from October 6 - 8.

Designed with a footprint of 265" x 152" (6731 mm x 3861 mm), the 80X JetMachining Center is ideal for large scale precision machining of larger or multiple parts out of a variety of materials, including metal, composites and stone. Not only does the machine feature the innovative Intelli-TRAX traction drive for higher accuracy and an expanded cutting envelope to 20' but it is also equipped with OMAX's Terrain Follower, an accessory designed to automatically and accurately cut parts from materials with irregular or warped surfaces without the need for special programming.

The 80X will be demonstrated with OMAX's Tilt-A-Jet cutting head, an innovative system that allows for virtually zero taper in most materials. When the system is in use, software automatically calculates and offsets the natural taper that results from the abrasivejet. The taper is moved from the part to the scrap, leaving parts with perfectly square edges.

OMAX will also equip the 80X with its Dual Pump Package, a fully integrated system that utilizes two P4055V pumps to produce unprecedented cutting speed and power and a significant reduction in machining time compared to previous cutting models. Available in a flexible footprint, the package operates on the 3rd generation cutting model of OMAX Intelli-MAX® Software, which is designed to accommodate cutting at 80 hp.

Visitors to booth 3257 will also see demonstrations on the 2652 JetMachining Center, the flagship model of OMAX's product line. Well known for its quick turnaround, the 2652 is ideal for short-run part production, prototype development and just-in-time manufacturing, providing fabrication and metal forming shops with efficient, precision machining without the hassle of tool changes, complex fixturing or heat-affected zones.

The machine will feature a Rotary Axis, which uses a robust, waterproof rotary head to cut 2D parts with incremental index rotations. The Rotary Axis allows users to cut pipe, circular or radiused materials from pre-existing CAD drawings or .DXF files using a wide range of materials, including stainless and mild steel, without heat-affected zones.

OMAX believes in manufacturing the best machines and accessories possible with the best software available, and works to continually develop cutting-edge technology and innovative software for its customers. As a result, each OMAX product comes with the OMAX Technology Guarantee, which provides software upgrades for all existing customers at no additional charge.

About OMAX
Headquartered in Kent, Washington, OMAX ® Corporation is the leading manufacturer of precision abrasive waterjet systems. Each OMAX JetMachining® system is powered by the company's innovative control software, bringing affordable abrasivejet technology to an expanding and diverse group of industries. For more information on OMAX products and accessories, contact Sandra McLain at 800.838.0343 or visit www.omax.com.

Posted by Industrial-Manufacturing at 03:55 AM | Comments (0)

President Signs Green Building Tax Deduction and R&D Tax Credit

FORT WORTH, Texas (Business Wire EON/PRWEB ) October 3, 2008 -- SourceCorp announces the extension of the Energy Efficient “Green” Building Tax Deduction and the two-year extension of the R&D Tax Credit. Today, Congress approved an unprecedented $700 billion government bailout and sent it to President Bush who quickly signed it.

Energy Efficient Commercial Building Tax Deduction

Extended through December 31, 2013. Section 179D(a) is a deduction for commercial building owners whose buildings meet certain energy standards. The deduction is as much as $1.80 per square foot for buildings that achieve a 50 percent energy savings target. Before claiming the deduction, the owner must obtain written certification from a professional engineer not related to the company using approved software that the required energy savings will be achieved.

Research and Development Tax Credit

The R&D tax credit was extended for two years through December 31, 2009. If you are involved in developing new products/processes, improving existing products, creating more reliable products, developing prototypes, design tools/jigs/molds/dies, apply for patents, testing new concepts, investment in manufacturing process activity, developing new technology or employ outside consultants and/or contractors to do any of these activities, you may qualify for the R&D Tax Credit.

About SourceCorp Professional Services

Celebrating our 25th year in business, SourceCorp Professional Services is the leading provider of R&D Tax Credit Studies, Energy Efficient Commercial Building Tax Deductions, Cost Segregation Studies, and LIFO Accounting in the U.S. SourceCorp serves many of the nation’s most prominent CPA firms, Associations, and Fortune 1000 companies. For more information or for a FREE analysis to see what your benefit would be, please visit: www.SourceCorpTax.com

Posted by Industrial-Manufacturing at 03:55 AM | Comments (0)

Microsoft, Dell, Samsung, Sun Microsystems, Cisco Gather to Discuss Key Supply Chain Issues

At the eyefortransport Hi-Tech & Electronics Supply Chain Summit, Supply Chain Experts from key Fortune 500 companies will present and discuss the latest issues for Hi-Tech & Electronics Supply Chain Management. With complimentary passes available for qualified supply chain executives, the event promises to be an exclusive, high-level opportunity.

Amsterdam, The Netherlands (PRWEB) October 3, 2008 -- Hugh Aitken, VP European Operations at Sun Microsystems, will join speakers from Microsoft, Samsung, Nokia, Dell and other top companies at this year's eyefortransport Hi-Tech & Electronics Supply Chain Summit, taking place November 27-28 in Amsterdam.

Aitken believes, "If your supply chain next year, looks like your supply chain of last year...you're history!" To ensure no supply chain gets left behind, this year's top-level expert speakers will cover an extensive range of topics, specifically tailored to the needs of Hi-Tech & Electronics shippers.

Key topics include:

* Reinvigorating your supply chain management
* Streamlining your aftermarket supply chain
* Best practices for outsourcing, low-cost country sourcing and near-shoring
* Operating efficiently on a global scale
* Managing your 3PL relationship
* How the Restriction of Hazardous Substances (RoHS) effects Waste Electrical and Electronic Equipment (WEEE), and its impact on your supply chain
* Benefitting from Greening your supply chain - bottom line results
* Selecting technology - what products create real results

eyefortransport has also embraced Aitken's philosophy of adaptation and made key changes to the event format this year. Most significantly, supply chain executives from Hi-Tech & Electronics companies can gain complimentary passes to the Summit. These passes include full access to the speaking programs, networking events and even meals and accommodation. Only 100 of these exclusive passes are available, so interested executives should register now through the website: http://events.eyefortransport.com/hitech08/free_pass.shtml

Companies already confirmed to attend include Hewlett Packard… Dell…Microsoft…Siemens…Panasonic…Phillips…Bosch… Tyco Electronics Thermo Fisher…Getronics…Schneider Electric…Teliasonera…Polycom Global…Oce Technologies…and many more.

The Summit represents an invaluable opportunity to learn from top experts, network and share ideas with peers, build business partnerships and discuss pressing needs with solutions providers. This is the only industry event that focusses exclusively on issues specific to the Hi-Tech & Electronics Supply Chain, making it a crucial source of information for executives in this field.

Transport & logistics solution providers can also participate in the event as supporting partners. Interested companies should contact David Embelton, at the details below.

For more information about the Summit, contact Emma Miller at the details below, or visit the website: http://events.eyefortransport.com/hitech08/index.shtml.

Posted by Industrial-Manufacturing at 03:55 AM | Comments (0)

Web Office Systems Launch Dedicated FuseMetrix Enterprise Server

Web Office Systems this week launched their new FuseMetrix Enterprise Server. Previously the FuseMetrix system has been available on a SaaS basis, however the full application is now available in a simple to configure dedicated server platform that can be installed on your own site or datacenter.

Milton Keynes, Buckinghamshire UK (PRWEB) October 2, 2008 -- Web Office Systems this week launched their new FuseMetrix Enterprise Server. Previously the FuseMetrix system has been available on a SaaS basis, however the full application is now available in a simple to configure dedicated server platform that can be installed on your own site or datacenter.

The way information technology works in a company or organisation is more critical to businesses than ever before. Quality data and the information that can be outputted from the system may just be the key to survival in these difficult economic times.

Many great manufacturing and service companies organise themselves along the following lines with 'Everything in its place and a place for everything!' at the heart of their production and/or administration systems.

A tidy workplace where everything flows in a sequential and orderly manner ensures that productivity is optimised.

But does the rest of the operation run as smoothly. Is there a sequential and orderly flow of data in an accurate and timely fashion?

Is information
a) in the right place?
b) on the same database?
c) easy to find?
d) easy to get at?

What about those Key Performance Indicators (KPI's) Do they come automatically or do various departments have to collate data from various sources then prepare spreadsheets before management see them?

Organisations that have a fully integrated Business Operating and Management Information System should have answered yes to all of the above.

Any Company or Organisation that would answer with just one 'No' is not working as effectively or efficiently as it can do.

Most people agree that the best solutions are fully integrated. The launch, last year, of the hosted (over the internet) fully integrated FuseMetrix Business Operating and Management Information System answered all of these questions and more for the SME market place.

Now, one year later the next generation of FuseMetrix comes in a box. The new dedicated FuseMetrix Enterprise Server is a total Business solution for all types of Organisations with all data residing on one database and with information available in real-time all of the time. This solution solves the problem where internet connections are slow or unreliable and gives Companies the real benefits of total Business integration with information available on demand.

Companies and Organisations can now have all of the functionality they need to run their operation from one database:-
CRM, contact management, enterprise e-mail, diary planning, document management (all can be linked to client records), SRM, purchasing management, purchase orders, invoicing, delivery notes, delivery tracking, estimating and quoting, project management, expenses, Human Resources, product traceability, engineering, manufacturing, warehousing, stock management, multi-currency capability, accounting and V.A.T.

FuseMetrix is applicable to any type of Company or Organisation whatever it does .

Manufacturing, Warehousing, Distribution, Logistics and Engineering Companies, Healthcare, Project Management, Consulting and Financial Services organisations, Retail, Leisure and Entertainment Industries, Advertising, PR, Printing and Publishing Companies, Trade Associations, Franchises, and Market Research Agencies, Small, Large, Public or Private…..
All do IT better with FuseMetrix.

Once a client's requirement is specified Web Office Systems delivers the FuseMetrix Enterprise Server configured and ready to go. Staff training is included in the price. The standard FuseMetrix Enterprise Server is available for only £20,000 +VAT. A small price to pay to do IT better!

Additional services can be added as required

FuseMetrix is already e-commerce enabled and can be integrated with a Company or Organisation web-site.

Existing data can be migrated and further specific customisation can also be accommodated.

Web Office Systems Limited are exhibiting the new FuseMetrix Enterprise Server at Inside Ex Bedford on Friday 3rd October. More information and case studies can be found at FuseMetrix

Posted by Industrial-Manufacturing at 03:53 AM | Comments (0)

No. 24 DuPont Chevrolet Racecar Blazes into 2009 With “Firestorm” Design

Jeff Gordon to Debut Paint Scheme at Daytona 500.

Wilmington, DE (Vocus/PRWEB ) October 2, 2008 –- DuPont and Hendrick Motorsports today unveiled a new design and color scheme that will appear on the No. 24 DuPont Chevrolet race car, driven by Jeff Gordon, beginning in the 2009 NASCAR Sprint Cup racing series. The Daytona 500, scheduled for Feb. 15, 2009, will be the first official points race of the 2009 season.

The new design, called “Firestorm,” was conceived by well-known NASCAR artist Sam Bass, who created the car’s previous two designs, including the original “Rainbow Warrior” scheme that appeared on the car when the alliance between DuPont, Hendrick Motorsports and Jeff Gordon was launched in 1992.

In May, DuPont, Hendrick and Gordon announced a contract renewal for the current longest-running sponsor/driver/owner combination in the NASCAR Sprint Cup Series.

“We're in the thick of the 2008 Chase for the Sprint Cup, but we're already looking forward to next year,” said DuPont Chief Marketing and Sales Officer David G. Bills. “We think this exciting new design is the perfect vehicle for carrying our brands and messages throughout the 2009 racing season.”

In addition to the DuPont “oval” logo, a long roster of DuPont brands and company messages appear with varying frequency on the No. 24 DuPont Chevrolet race car. The list includes DuPont™ Tyvek® Home Wrap, Pioneer® Hi-Bred Seed, DuPont Automotive Finishes, DuPont™ Corian® solid surfaces, DuPont™ Kevlar® high strength material and many others.

DuPont is a science-based products and services company. Founded in 1802, DuPont puts science to work by creating sustainable solutions essential to a better, safer, healthier life for people everywhere. Operating in more than 70 countries, DuPont offers a wide range of innovative products and services for markets including agriculture and food; building and construction; communications; and transportation.

Posted by Industrial-Manufacturing at 03:53 AM | Comments (0)

Virtual Energy Forum Announces Speakers for December Event

Duke Energy CEO Jim Rogers, FERC Chairman Joseph Kelliher, and Energy Leaders from National Grid, Staples, Merck and New York City to Keynote.

Boston, MA (PRWEB) October 2, 2008 -- The Virtual Energy Forum (www.virtualenergyforum.com), the first and largest all-virtual gathering of energy leaders from around the world, today announced the initial list of confirmed speakers for its second event, taking place on December 10th and 11th, 2008. The Virtual Energy Forum is an innovative two-day, online-only event that will connect thousands of global business leaders in the areas of energy management, renewable energy, and sustainability -- in a way that is not possible with physical events or webinars.

The December 2008 Virtual Energy Forum builds on the huge success of the prior Forum (conducted in June 2008) which garnered praise from business, government and the media, and featured such noted presenters as former Speaker of the U.S. House of Representatives Newt Gingrich, and U.S. Senator John F. Kerry.

Confirmed speakers of the event include:

* Joseph Kelliher, Chairman of the US Federal Energy Regulatory Commission
* Jim Rogers, Chief Executive Officer, Duke Energy
* David Manning, EVP and Chief Environmental Officer, National Grid
* Mike Kearney, President, Siemens Building Technologies
* James (Jim) Gallagher, Senior VP of Energy & Telecommunications, City of New York
* Mark Buckley, Vice President, Environmental Affairs, Staples, Inc.
* Mary Ellen Mika, Manager, Energy and Environment, Supply Chain, Steelcase, Inc.
* Thomas Downing, Energy Manager, Yale University
* Julia Hamm, Executive Director, Solar Electric Power Association
* Robert Colucci, Senior Director , Global Energy Planning and Management, Merck
* Philip V. Adams, President and Chief Operating Officer, World Energy
* Nick d'Arbeloff, Executive Director, New England Clean Energy Council
* Sarah Hetznecker, Director of Project Development, Conergy Projects Group
* C. David Myers, President, Building Efficiency, Johnson Controls
* Doug Kaempf, Industrial Technologies Program, US Department of Energy
* Kevin Kampschroer, Acting Dir., Green Buildings, US General Services Administration
* Brian Dutt, Vice President of Sales and Marketing, Delta Controls

"We are honored to have such a distinguish faculty of energy leaders join us for our second Virtual Energy Forum," said Robert Rosenbloom, CEO of The Virtual Energy Forum. "We look forward to adding more speakers in the coming weeks, including senior energy executives and congressional leaders, to inform and share best practices with the 5,000 expected attendees."

"We are also excited to have a great group of supporting sponsors for this unique event," continued Rosenbloom, "including leading energy product and service companies like Johnson Controls, Delta Controls, Siemens, Conergy, World Energy, Hess, Reliable Controls, NStar, Constellation Energy, UTC Power, Distech Controls, and Window Film Depot."

The Virtual Energy Forum Provides a Unique Experience:

The Virtual Energy Forum is a two-day online event that features the following:

* Over 50 live streaming video presentations from alternative energy thought leaders that allows attendees from around the globe interact directly and ask questions of these experts in real-time.
* Eleven topic-specific tracks of live video and panel presentations that will present case studies in a variety of sectors: Carbon Footprint Reduction, Cases in Corporate Sustainability, Green Buildings, Greening the Energy Supply, Energy Monitoring and Controls, Government & Defense, Higher Education, Manufacturing, Municipal, Solar, and Wind Energy.
* A virtual exhibit hall and virtual booths that will allow attendees to have live text and video chat with representative of leading energy management and renewable energy product and service companies.
* A resource center containing hundreds of documents outlining the latest trends in energy monitoring, sustainable business, and alternative sources of energy.

The Virtual Energy Forum: A Carbon-Friendly Way to Connect:

The Virtual Energy Forum is also a sustainable event in and of itself. Last June's Virtual Energy Forum saved over 12 million pounds of CO2 in the form of saved emissions from airplane travel, hotel, and transportation. In an era of energy-awareness and economic difficulty, the event provides a low cost, high value and environmentally-friendly way for energy executives to connect and share information.

The Virtual Energy Forum is a no-charge event for anyone who registers at www.virtualenergyforum.com. Beyond participating in the content sessions described above, The Forum offers an efficient way for attendees to connect and interact with event exhibitors and sponsors, from the convenience of their own office or home, via a broadband Internet connection.

For up to the minute information, and to register for Virtual Energy Forum please visit: http://www.virtualenergyforum.com.

About The Virtual Energy Forum
The Virtual Energy Forum (www.virtualenergyforum.com) is a unique virtual event designed to allow people interested and involved with sustainable energy management operations to connect and successfully interact with one another in ways that are impossible at physical events, through powerful Web-based software and services. PlatformQ, the producer of the Virtual Energy Forum, is a new company whose mission is to leverage the accessibility of online events to connect individuals, companies and organizations - across North America and internationally-- who might otherwise not be able to travel to physical events or communicate with leading experts or thought leaders. (www.platformq.com)

Virtual Energy Forum and PlatformQ are trademarks of PlatformQ, LLC. All other trademarks or service marks are property of their respective owners.

Posted by Industrial-Manufacturing at 03:52 AM | Comments (0)

BFM™ Fitting Distributed by Powder-Solutions, Inc. Helps Reduce Risks of Bulk Powder Processing Plant Explosions

Traditional flex sleeve connectors contribute to dusty plant environments and risk of dust explosions.

Chanhassen, MN (PRWEB) October 2, 2008 -- www.powder-solutions.com -- Powder-Solutions, Inc., American distributors of the USDA accepted/3A certified BFM™ fitting, expresses the need for bulk powder processing plants to incorporate appropriate explosion mitigation procedures and equipment to ensure the safety of both plant and personnel.

Over the past 30 years, more than 300 dust explosions have killed more than 120 workers in grain silos, sugar plants, and food processing plants. In 2008, after a catastrophic dust explosion in a Georgia sugar factory, the U.S. House of Representatives passed a bill requiring the Occupational Safety and Hazards Administration (OSHA) to set standards for regulating combustible dusts.

All this has been carefully observed by Marv Deam, CEO of Powder-Solutions, Inc., and he believes his company has a worthwhile product to offer any industry dealing with production of bulk powders, dusts, or granular products. "Now more than ever, it is imperative that bulk powder processing plants are prepared with equipment that not only is efficient during processing, but also protects from the possibility of plant explosions," states Deam. "Sophisticated explosion venting and suppression systems can only be successful if the primary explosion is contained within the process equipment. Independent lab tests have confirmed that whereas the hose clamp is likely to leak in the event of an internal explosion, the BFM™ fitting distends with the sudden pressure shock, but it does not fail."

Available from Powder-Solutions since 2007, the BFM™ fitting was initially designed for food and pharmaceutical production facilities to stop powder leakage from process piping. "We see now that there are opportunities in disparate industries, where the inherent design of the BFM™ fitting has great potential to increase safety in a wide variety of industrial applications."

The BFM™ fitting system represents a new paradigm in flexible connectors. Instead of slipping over the outside of process piping or connections, the BFM sleeve snaps securely and perfectly into the inside of the matched spigots. Where old style connectors required the use of a hose clamp with all its inherent flaws, the BFM™ fitting simply snaps into place without the use of external clamps or the tools needed to secure them. There are no crevices to trap powder in the line and no cracks to leak powder to atmosphere. There are no wear points to abrade and degrade that could release in the event of an internal explosion. By virtue of the integral internal snap band seals, the BFM™ fitting actually seals even tighter in such events.

"Unique in its resistance to over pressure incidents, the BFM™ fitting is not only an efficient connective solution, it is a significant safety measure," continues Deam. "From industries as varied as dairy and food to pharmaceutical and chemical to wood production, the BFM™ fitting is an effective tool in an overall explosion mitigation strategy."

A full video of how the BFM™ fitting is replacing traditional hose clamps in bulk powder processing, can be found at http://www.powder-solutions.com/.

ABOUT POWDERS-SOLUTIONS, INC.
Powder-Solutions, Inc. is a leading distributor of the USDA accepted/3A certified BFM™ fitting, the first flexible industrial connective solution specifically designed to replace the standard flexible sleeve and hose clamp assembly and address chronic sanitation and safety concerns for the bulk powder processing industry. By working closely with companies in the food, dairy, nutritional, pharmaceutical, chemical and other industries, Powder-Solutions, Inc. continues to develop and refine new strategies to assist these companies in achieving their business objectives via safe and innovative plant processes. For more information on Powder-Solutions, Inc. or the revolutionary BFM™ fitting, visit www.powder-solutions.com.

Posted by Industrial-Manufacturing at 03:52 AM | Comments (0)

Weidmuller introduces Remote Resettable Circuit Protectors at Newark

ESX10-T Series isolates circuit failures for design, control and systems integration applications

CHICAGO (Business Wire EON/PRWEB ) October 2, 2008 -- Committed to bringing engineers the newest technologies first, leading multi-channel electronics distributor Newark, part of the global Premier Farnell Group, announces that it is first to market Weidmuller’s innovative new line of compact electronic circuit protection devices. These devices feature remote reset capabilities that operate via the use of an electronic signal.

Combining electronic trip characteristics and active current limitation to allow selective disconnection of loads that are connected to 24VDC power supplies, the ESX10-T Series is unique in the industry. Selective load protection prevents complete shutdown of the system by quickly disconnecting the faulty path, in the event of an overload or short circuit. This eliminates the need to open an enclosure, dispatch repair personnel and risk their exposure to electrical components.

These new circuit protectors are approved for standard and hazardous location (UL Class 1 Division 2) use and operate with any 24VDC power supply.

“We are excited to team with Newark to introduce this new line of innovative circuit protectors to the market,” comments Bruce Hofmann, Director of Marketing, Weidmuller. “Newark is a great partner for Weidmuller because of their extensive market coverage and broad customer base of engineers.”

Paul Buckley, Senior VP, Product and Supplier Management, Newark said, “This innovative resettable circuit protector is exactly the type of advanced technology our customers can expect to find at Newark.”

Product details on the device, which is available for same-day shipping, can be viewed at www.newark.com/weidmuller.

About Newark

Newark, part of the global Premier Farnell Group, and a leading multi-channel, high-service electronics distributor supporting millions of engineers and purchasing professionals across the Americas, is known for offering the broadest selection of components and test equipment from 440+ top manufacturers for design engineer and maintenance professionals. With multiple sales channels, customers do business with Newark through contact centers, local branch network, field sales force and a world-class website at www.newark.com.

About Weidmuller

Weidmüller is the leading provider of solutions for electrical connectivity, transmission, conditioning and processing of power, signals and data in industrial environments. They develop, produce and market products and complete solutions in the field of electrical connectivity, functional electronics and communication electronics. The Weidmuller group has a strong international focus with manufacturing and sales locations in over 70 countries.

Posted by Industrial-Manufacturing at 03:50 AM | Comments (0)

Analog Devices Showcases Innovations for Advanced TV and Digital Radio at CEATEC

20 Demonstrations In Four Categories: Advanced TV, Wireless Video, Portable Electronics and Digital Radio

(Business Wire EON/PRWEB ) October 2, 2008 -- CEATEC OCTOBER 2, 2008, MIHAMA-KU, JAPAN

WHO:

Analog Devices, the world's leading supplier of data conversion and signal processing technologies, will showcase innovations for advanced television and digital radio, among others, in conjunction with CEATEC Japan 2008 - Asia's largest interactive exhibition of information on the communications, information and imaging fields.

WHEN:
October 1-3, 2008 from 9:30 am - 6 pm

WHERE:
Hotel New Otani Makuhari, 2nd Floor, Mai no ma room
2-2, Hibino, Mihama-ku, Chiba-city, Chiba 261-0021, JAPAN

WHAT:
Twenty demonstrations in five categories:

-- Advantiv(R) advanced television solutions and SoundMax(R) for TV audio solutions.
-- An 802.11n-compatible wireless HDMI solution and latest AV receiver solution with HD audio.

-- Portable device solutions: a mobile RF tuner for ISDB-T, the world's smallest HDMI transmitter, and various touch sensors.

-- Digital signal processing (DSP) solutions for digital/Internet radio using ADI's Blackfin(R) processor along with tools and software from the following ADI partners: ACCESS CO., LTD., FUJISOFT INCORPORATED, MACNICA, Inc., Audyssey Laboratories, Inc. and Pie Soft Lab Corp.
-- General-purpose products: a LED backlight driver for PC monitors and portable/universal high-precision power solutions.

For more information or to schedule a private demonstration, contact MyLien Nagata at 03-5402-8270 or mylien.nagata@analog.com.

About Analog Devices

Innovation, performance, and excellence are the cultural pillars on which Analog Devices has built one of the longest standing, highest growth companies within the technology sector. Acknowledged industry-wide as the world leader in data conversion and signal conditioning technology, Analog Devices serves over 60,000 customers, representing virtually all types of electronic equipment. Celebrating over 40 years as a leading global manufacturer of high-performance integrated circuits used in analog and digital signal processing applications, Analog Devices is headquartered in Norwood, Massachusetts, with design and manufacturing facilities throughout the world. Analog Devices' common stock is listed on the New York Stock Exchange under the ticker “ADI” and is included in the S&P 500 Index. http://www.analog.com.

Posted by Industrial-Manufacturing at 03:50 AM | Comments (0)

Analog Devices’ Audio Codecs Offer the Industry’s Best Audio Experience, Lowest Power Dissipation

ADI’s ADAU1361 low-power stereo audio codec leads the industry in audio performance at lowest dissipated power, while the ADAU1761 adds support for ADI’s audio algorithm suite or licensed third party algorithms.

SAN FRANCISCO (Business Wire EON/PRWEB ) October 2, 2008 -- Analog Devices, Inc. (ADI), a world leader in semiconductors for signal processing applications, today extended its line of audio processing solutions with a pair of codecs (coder/decoders) for high-performance portable audio electronics that deliver longer battery life without compromising audio quality. The ADAU1361 and ADAU1761 24-bit audio codecs are ideally suited for wireless handsets, portable media players, portable navigation devices, digital still cameras and other mobile audio and telephony applications. The ADAU1361 achieves greater than 100-dB signal-to-noise ratio (SNR), while dissipating less than 5 mW in stereo playback mode. The ADAU1761 audio codec adds a SigmaDSP® digital audio processor for customizing the end user’s audio experience. ADI’s SigmaStudio™ graphical design tool allows the easy combination and integration of ADI’s algorithm suite, customer developed algorithms, and/or branded third-party audio algorithms.

The ADAU1361 and ADAU1761 audio codecs include stereo audio ADCs (analog-to-digital converters) and DACs (digital-to-analog converters) that support sample rates from 8 kHz to 96 kHz, and a digital volume control. The analog input stage supports a stereo line input, a stereo analog microphone interface and a circuit to supply the microphone bias voltage. It also supports the new standard in high-performance low-noise, digital microphones.

The analog output stage includes two differential and three single-ended outputs, allowing for the direct connection of stereo headphones, an earpiece and other output transducers. AC-coupled or “capless” configurations are supported for the headphone interface. The differential line outputs can interface to a broad portfolio of ADI’s Class-D power amplifiers.

The serial control bus supports the I²C or SPI protocols, while the serial audio bus is programmable for I²S, left/right justified, or TDM modes. A programmable PLL supports flexible clock generation for all standard rates and available master clocks from 8 MHz to 27 MHz.

As part of a complete portable audio signal chain, the ADAU1361 and ADAU1761 interface to any analog microphone or PDM digital microphone, including Analog Devices’ ADMP401 analog and ADMP421 digital MEMs microphones. The codecs also match well with both stereo and mono Class-D audio amplifiers from Analog Devices, such as the SSM2315, SSM2317, SSM2306 Class-D power amplifiers.

Availability and Pricing

The ADAU1361 and ADAU1761 are sampling now and will be available in production quantities in November. The ADAU1361 and the ADAU1761 are housed in 5-mm × 5-mm, 32-lead QFN (quad flat no-lead) packages and are pin and footprint compatible. The ADAU1361 is priced at $2.88 per unit in 1,000-unit quantities. The ADAU1761 is priced at $3.91 per unit in 1,000-unit quantities. WLCSP (wafer-level chip-scale package) options are available for both components. For more information, visit http://www.analog.com/ADAU1761.

About SigmaStudio

The SigmaStudio graphical programming tool allows the user to create a signal flow using familiar audio processing blocks, such as biquad filters, delays, and dynamics processors. The resulting design can be linked directly to the SigmaDSP hardware, and the SigmaStudio tool can be used as a real-time control surface for the design's parameters, allowing easy system tuning. Third-party algorithms, such as Dolby® ProLogic® II, Audistry™ and SRS® TruSurround XT™ are available for the SigmaDSP and integrate seamlessly into the SigmaStudio environment. For more information, visit http://www.analog.com/SigmaDSP.

About Analog Devices

Innovation, performance, and excellence are the cultural pillars on which Analog Devices has built one of the longest standing, highest growth companies within the technology sector. Acknowledged industry-wide as the world leader in data conversion and signal conditioning technology, Analog Devices serves over 60,000 customers, representing virtually all types of electronic equipment. Celebrating over 40 years as a leading global manufacturer of high-performance integrated circuits used in analog and digital signal processing applications, Analog Devices is headquartered in Norwood, Massachusetts, with design and manufacturing facilities throughout the world. Analog Devices' common stock is listed on the New York Stock Exchange under the ticker “ADI” and is included in the S&P 500 Index.

SigmaDSP is a registered trademark and SigmaStudio is a trademark of Analog Devices, Inc. All other trademarks contained herein are the property of their respective owners.

MULTIMEDIA GALLERY

http://www.businesswire.com/cgi-bin/mmg.cgi?eid=5794585

Posted by Industrial-Manufacturing at 03:50 AM | Comments (0)

Kalosoft Technologies Launches Galaxyretail.com

The new e-commerce business portal for the small and medium size business who wants to sell their products in India, and for those who like to shop and sell online.

Dehradun, Uttarakhand (PRWEB) October 1, 2008 -- Galaxyretail.com is an online marketplace where the companies or individuals who are interested in doing business with India, can get themselves registered to cater to the Indian buyers and get the trading leads, contacts in the Indian business economy.

The site is designed with the concept of creating a business place where all small and big organisations can participate in promoting their business to India, keeping their Individuality as well, here the organisations can express them and decide how they like to promote their business on the web to the Indian economy. The company also offers procurement handling, business consultancy along with the dynamic individual website for their clients, on which they can put their bids, offers, services, projects, online stores, careers, the company Galaxyretail.com have tried to put maximum of the needs, which a company is looking for to do business in India, the website is equally designed for the individuals as well, who wants to sell their new or used items, or for the individuals who are looking for the Indian products and their ethnic culture.

"I really feel galaxyretail.com is a good market place for the company who wants to start their operations in India," tells client Jeff Neonate.

The company is dedicated towards giving the best value to their clients and trying to understand what best essential can be done to make it a good marketplace for all the business men across the globe.

"The company has also started with a new website http://www.mytenderworld.com for the top business men, where you can buy the tenders and contracts. It's for the business houses that are looking to bid for the Indian projects," says managing director Gopal Mathur.

Mytenderworld.com upload tenders form 300 newspapers published every day in India, covering all the states and business categories. The company is trying to develop a network where the business can grow itself, and easier for the foreign clients do get the share in world's fastest growing economy.

Kalosoft Technologies Pvt Ltd.
The company is based in Dehradun Uttarakhand India, having the team of experienced engineers, involved in the development of customised software solutions for medium and small scale business.

For more information
Contact
Ankit Mathur
Director Sales and Marketing
267, Panditwari,
Dehradun
India.
+91-9884870933
http://www.galaxyretail.com
E mail: support@galaxyretail.com

Posted by Industrial-Manufacturing at 03:48 AM | Comments (0)

United Case™, a UFP Technologies brand, Announces New Online Store Selling Pelican™ Products

United Case™, a UFP Technologies brand, today announced the launch of a new website selling Pelican™ Products' complete line of protective cases, case accessories and flashlights.

Kissimmee, FL (PRWEB) October 1, 2008 -- United Case™, a UFP Technologies brand, today announced the launch of a new website selling Pelican™ Products' complete line of protective cases, case accessories and flashlights.

The new United Case online store, www.unitedcase-pelican.com, provides a convenient online shopping source for all of Pelican's Products. Each protective case product page includes detailed information providing complete case specifications including interior and exterior case dimensions, weight, color options, case certifications along with high quality photographs. Each protective case has been classified by size: micro, small, medium and large; as well as by application: camera, briefcase, laptop, carry-on, iPod®, gun / rifle and trade show, to provide simple navigation for the user.

United Case's online store will also offer Pelican case accessories and flashlights. The case accessories range from foam replacement pads to padded divider sets designed to provide interior case protection. Pelican's specialty flashlights available through United Case include lights small enough to wear on a headband to large waterproof lights suitable for scuba diving.

In addition to selling Pelican Products, United Case offers engineering services for custom foam case inserts. Fabricated case inserts provide the best interior protection for the items housed inside of a case. United Case has the knowledge, capabilities and access to materials to fabricate a best-in-class foam insert for any protective case. Detailed information regarding custom foam insert solutions and materials can be found on each protective case product page.

About United Case
United Case, a UFP Technologies brand, is a full service provider of protective cases and custom engineered foam inserts. In partnership with United Foam, the flagship brand of UFP Technologies, United Case offers a large selection of foams, multiple fabrication capabilities, eight North American locations and the protective packaging design knowledge and experience required to design the best case and foam insert solutions.

For more information on United Case's products and capabilities, call (888) 409-0090 visit www.unitedcase.com, www.unitedcase-pelican.com, or email sales@unitedcase.com.

About Pelican Products, Inc.
Pelican™ Products, Inc. is a global leader in the design and manufacture of advanced lighting systems and virtually indestructible cases with distribution centers in Barcelona, Spain - Edmonton, Canada - Tokyo, Japan - China, and Adelaide, Australia. The company was acquired in 2005 by venture capital firm Behrman Capital.

Posted by Industrial-Manufacturing at 03:48 AM | Comments (0)

Safeway Hydraulics adds Lower Cost Option for Connector

SafeWay Hydraulics Inc, has made its S51 series quick action coupling available in nickel plated steel giving the user a lower cost option over brass, for this durable coupling design.

Chaska, MN (PRWEB) October 1, 2008 -- SafeWay Hydraulics, a manufacturer and supplier of quick action hydraulic couplings for industrial, agricultural & mobile equipment, is announcing the availability of the S51 Series connect under-pressure "wing style" quick coupling in steel. Added as a cost saving option over brass, the internal parts remain brass and stainless steel with the body and tip shells being electroless nickel plated steel. Steel reduces cost while adding strength. The electroless nickel plating eliminates corrosion. The -STL addition is available in 3/4", 1" and 1 1/4" sizes.

"This product series has proven to be very popular and durable," said Steven Berkey, president of SafeWay Hydraulics. "We are pleased to offer this cost reduction option without compromising quality and durability. Our hydraulic couplers have a solid reputation for ease of use without leaking. All of our products continue to be designed, machined and assembled in the USA."

SafeWay's S51 Series is a minimum spill, thread-to-connect, fluid transfer quick coupling designed for use with most industrial fluids. It can be connected under full system pressure by rotating the female threaded heavy-duty ductile cast iron wing nut or brass hex nut onto the mating male threaded tip (nipple).

SafeWay Hydraulics, Inc is a family owned business located in Chaska, Minnesota and has been manufacturing hydraulic couplers since 1969. Today they are a leader in Quick Connect Couplings and offer a variety of features for both industrial and agricultural applications. There are many features and options to its hydraulic product line including push to connect, flush face, non-spill, quick-release and connect under pressure couplings.

Posted by Industrial-Manufacturing at 03:48 AM | Comments (0)

ECS Announces PowerConnect Strategic Partnership Program to Support its Demand Response Initiatives

ECS is pleased to offer valuable strategic partnership opportunities through its PowerConnect strategic alliance program.

Buffalo, NY (Vocus/PRWEB ) October 1, 2008 -- As the leading authority on demand response in North America, Energy Curtailment Specialists, Inc. (ECS) is pleased to offer valuable strategic partnership opportunities through its PowerConnect strategic alliance program.

PowerConnect is designed to build strategic alliances between ECS and energy service professionals such as energy consultants, suppliers, energy efficiency engineers and others. The goal of the program is to open opportunities for clients of these companies to participate in ECS' array of PowerPay! demand response programs across North America.

Power Connect partners agree to refer their clients to participate in ECS' demand response programs, in which they reduce their electricity usage a few times a year for a small period of time to relieve stress on the grid. By participating, ECS pays customers for their participation and will also pay PowerConnect partners when their client successfully performs. This new source of income for the client adds value to the strategic partner's services, as well as helps the client fund projects offered by the PowerConnect partner.

About Energy Curtailment Specialists, Inc.
ECS offers turnkey, administrative, and a la carte demand response services. Energy Curtailment Specialists is currently serving markets in all of New York, California, New England, Kansas City, PJM territories, and Ontario, Canada. For more information, please call 877-711-5453, or visit us on the web at www.ecsgrid.com

Media Contact:
Tracey Penner
Communications Specialist, ECS
877-711-5453 x233
tpenner@ecsgrid.com

Posted by Industrial-Manufacturing at 03:46 AM | Comments (0)

Ecliptek MEMS Spread Spectrum Oscillators Provide Significant Cost Savings, Reduced EMI

Ecliptek Corporation, a leading supplier of frequency control products for over 20 years, introduces its new EMS series of MEMS based spread spectrum programmable clock oscillators. These silicon resonator based oscillator devices greatly reduce cost and lead time as compared to similar quartz based oscillator products.

Costa Mesa, CA (PRWEB) October 1, 2008 -- Ecliptek Corporation announces the expansion of their EMO™ family of MEMS oscillator products to include a new MEMS spread spectrum low EMI

Industrial Manufacturing News

Manufacturing of Products, Plastics, Rubber, Fasteners, Manufacturing Equipment

Industrial Product Directories

Manufacturers News Categories

Recent Entries

Search

Archives

Submit Press Release

October 17, 2008

HaydonKerk Motion Solutions Introduces Custom Lead Screws for Transportation Applications

EXAIR Introduces New E-Vac Vacuum Generator

Unifin Offers ForZair™ Mobile Transformer Oil Coolers

USTRANSCOM Announcement

LED Medical Diagnostics Names Dr. Ralph Green President and CEO

Cranes Provide On-Site Service for Giant Draglines to Ensure Heavy Lifting is not Interrupted

Thomas Skid Steer Loaders Appoints John Andrews as Regional Business Manager, Western Europe

New Bri-Mar Line of Dump Inserts Expands Pick-up Truck Versatility

iRespond Announces New Products

Freescale Named No. 1 in Auto MCUs; Set to Showcase Technology Leadership in Detroit

Ohio Coatings Company Earns 2008 Summit Award at Consona Customer Conference

Parallel Petroleum Chooses Triple Point’s Solution for Fair Value Disclosure

E-ONE A Major Fire Apparatus Manufacturer To Use ECK ® Coating To Prevent Dissimilar Metal Corrosion On All New Fire Truck Builds

Timelapsevideos.net Introduces EZHD High Definition Time-Lapse Video System

QlikView's DIY Business Intelligence Helps Cultivate Profitability

Universal Forest Products Western Division President Pat Webster to Become President and COO

To Better Service its Customers in the Northeast and Eastern Portions of the U.S.A, Mario Cotta America, Inc. Opens New Branch Office in Central New York State

RoadLoK Security Inducted into Motorcycle Industry Council

Dorf Ketal Chemicals Adds Prominent Industrial Distributor Dorf Ketal Chemicals Taps Palmer Holland, Inc.

Doopoco Enterprises Fine Cabinetry Announces a New Web Site and Sustains Extraordinary Growth Through 2007

October 15, 2008

New Technical Paper Reveals Why Torit® PowerCore® is Smaller & Smarter Than Traditional Baghouses

QlikView's DIY Business Intelligence Helps Cultivate Profitability

Innovative Enterprise Inventory, Assets and Tracking Management System Eliminates Customization Cost in Tight Economy

Extended Microsoft Project Server solution boosts product development efficiency at Bosch and Siemens Household Appliances Group

ECS Nominated for Platts Global Energy Award

Cognis' QTA® System Helps Westfalia Separator Commission Biodiesel Plants in Record Time

ESS and Atrion International Extend Hazardous Substance Reporting and Product Compliance Capabilities Through Partnership

Goertek Selects Phitek Active Noise Rejection™ Technology for New Noise Cancellation Earphones

Mettler Toledo Announces the new Titration Compact line for Simple and Secure Karl Fischer Titration, the Successful Titration Excellence line in Version 3.0, and the Next Generation of the powerful LabX Titration PC software.

Thomas Equipment Showcases Thomas Skid Steer Loaders at Annual SAIE Building Expo in Italy

Cbeyond Leverages Count5 Q Companywide

Sky IT Group and QlikTech Provide Strategic Sales Analysis for Leading Manufacturers and Retailers

Apollo Introduces Website Designed for Pro Photographers' Convenience

Impact Systems Announces ECM Deployment and Migration Solutions Designed for Mid-Market Companies Based on EMC® Documentum® platform

iXsystems Sponsors meetBSD California Conference

2008 Medical Electronics Forum in Taiwan

Manitex International Announces New Director of Operations--The Boom Truck and Truck Mounted Crane Company is Expanding its Footprint in the World Market

Tripwire, Inc. Streamlines the Opportunity-to-Order Process with WebSource CPQ and Oracle's Siebel CRM OnDemand

Integrated Project Management Named a “Top Small Workplace” by The Wall Street Journal and Winning Workplaces

Leading Life Sciences Manufacturer Implements QAD Customer Relationship Management (QAD CRM)

The Prince George's County Small Business Initiative Partners with George Mason University to Offer Contracting With the Federal Government Certificate Program

50 States, More Than 3000 Orders for Custom Shipping Boxes Created with Shipping Box Configurator

Sanimax Selects Process Industries for Microsoft Dynamics AX from Fullscope

Governor Schwarzenegger Signs Groundbreaking Legislation at Nelson Nameplate Implementing Green Chemistry Program

Tree of Life Adds Hearts&Minds Peanut Butter With Olive Oil and Omega-3 To Its Selection

QuoteWerks Expands CRM Compatibility With Support For ACT! 2009 (11.0) and SalesLogix 7.5

October 13, 2008

Doe Run Smelter Air Monitoring Reflects Attainment

The MathWorks Introduces Simscape Language for Physical Modeling

BuyDesign® Channel Sales from TDCI Now Integrated with Infor ERP SyteLine

Holden Advises on Survival Pricing: Prolonged Economic Crisis Requires Immediate, Unconventional Tactics

Integrated Labels Offering Further Expands Printing Offering From My1Stop.com

TrendPointers Introduces a New Sentiment Indicator to Look into the Economic Future

OPC DataHub First to Put all of OPC Data into Excel

Fast Radios Introduces RoIP: Extending Two-Way Radio Range Thousands of Miles

Dean Machinery Co. Unveils New Headquarters in South Kansas City

Clean Picks Up New Talent, and Gets a Move On

TAH Industries' New Generation II Universal Cartridge Simplifies Packaging and Dispensing of Two-Component Materials

Cygne Designs, Inc. Announces Resignation of Chairman of the Board of Directors of the Company

Footwear Forced To Stretch For Safety

Industrial Nanotech Announces Results of September Meetings In NY and NJ With Petrobras, One of the World's Top Ten Energy Producers

Houston Courier Service Launches One-Click Ordering Feature

Defence Doors Ltd Secures Major Works Contract on Carlisle Flood Defence Scheme

Pembroke Consulting to Examine How Financial Crisis Affects Wholesale Distribution in 2009 Economic Forecast

Master Chemical Introduces TRIM® E906, A Premium Long Life, Low Foam Emulsion

CPDA'S Dr. Ken Versprille to Participate in CAD/CAE Model Clean-Up Webinar

Call for Applications for Standards Committee for BSR/SCS-002-200x: "Type III Life-Cycle Impact Profile Declarations for Products and Services"

New On-Demand Print Center From ALOM Heps Businesses Speed Customer Service

Teen Launches New Multicultural Girls Line for GottaBCute Apparel and Accessories

Plant Closure, Demolition and Remediation Experts Launch Redevelopment Campaign