« March 2005 | Main | May 2005 »

April 29, 2022

LuminOre Coatings are a Safe Bet for Wynn Las Vegas

In its grand opening, the new Wynn Las Vegas unveiled architectural artistry, elegance and some spectacular effects made possible by LuminOre Inc., specialists in composite metals.

Vista, CA (PRWEB) April 29, 2022 -- This week’s grand opening of the new $2.7 billion Wynn Las Vegas -- built by Steve Wynn -- has completely energized Las Vegas, and the new mega-resort’s architectural artistry and elegant sophistication has literally been the talk of the town. Creating an environment that insiders say ‘must be experienced to be understood,’ the Wynn Resorts chairman has incorporated some spectacular effects with help from LuminOre Inc. of Vista, Calif., specialists in composite metal.

”We're very excited to be a part of the Wynn Las Vegas experience,” says Tom Valente, founder and president of LuminOre Inc. “Mr. Wynn has produced some of the world’s most famous hotel-casinos ever built, including the Mirage, Treasure Island and The Bellagio, and his designers very often require unique applications in metals and metal alloys to achieve a desired look or environment. LuminOre’s patented metalizing process has revolutionized the way the world works with metal, and our clients are able to deliver a custom metal finish efficiently and cost effectively on practically any surface.”

In addition to its use by billion-dollar resorts such as the Wynn Las Vegas and The Bellagio, motion picture set designers and special effect companies, LuminOre’s patented, sprayable metal finishes offer extensive industrial and marine applications. LuminOre’s composite metals spray onto virtually any surface using conventional spray equipment, and are available in aluminum, brass, bronze, copper, iron, nickel-silver, stainless steel, X-metal and Z3. The end result is a protective coating that withstands the harshest of environments, is non-conductive of electricity and anti-corrosive.

”LuminOre’s patented cold-sprayable process allows a thin layer of metal to be applied over any substrate, in virtually any configuration or design,” explains Terry Gould, president of LuminOre Industrial & Marine Coatings Inc., a licensee of LuminOre which specializes in marine and industrial applications. “LuminOre looks, feels and acts like hot-cast metal, yet no heat is needed. From foam to fiberglass or plaster to paper, the LuminOre process adheres to most any surface other than skin and water. Once cured, the product has many of the characteristics of a cast metal, including texture, luster and heat conductivity.”

According to Gould, LuminOre’s benefits goes far beyond Las Vegas and the world of sophisticated design elements. Testing over the past several years, he explains, has shown LuminOre to be an excellent deterrent to marine organisms attaching themselves to hulls or structures beneath the water line.

“In the Great Lakes where there is a very large Zebra Mussel problem,” says Gould, “we’ve had test plates in the water protected by LuminOre material. After five years, not a single footprint of Zebra attachment has been recorded.”

The LuminOre process has made incredible contributions in a variety of diverse industries, and Valente concludes that many of its uses are still being discovered. From metal artistry in Vegas to fine furniture finishes to protective coatings in harsh marine environments, the innovative breakthrough of LuminOre’s cold-metalizing process is actually changing the way architects, designers and industrial engineers approach problem-solving with metals.

For more information on LuminOre or LuminOre products, visit www.luminore.com or contact Ms. Kelly Luyet at 760.597.9201.

Headquartered in Vista, Calif., LuminOre® Inc. is a specialist in composite metal finishes. LuminOre’s patented, cold-metalizing process seamlessly applies to almost any surface, giving the look of solid metal casting without the weight and expense. In addition to highly specialized effects in furniture, design, construction and architecture, the extremely versatile LuminOre applications provide long-term protection for chemical tanks, potable water storage, industrial facilities and in harsh marine environments.

For more information on LuminOre protective coating and metallic finishes, call Kelly Luyet at 760.597.9201 or visit www.luminore.com.

Posted by Industrial-Manufacturing at 07:05 AM | Comments (0)

April 28, 2022

Geodex Announces New Inferred Resource in Mo, W from Zone III at the Sisson Brook Copper-tungsten-molybdenum Deposit, New Brunswick

The inferred resource in Zone III is estimated to be 10.82 million tons of 0.151% WO3 and 0.073% MoS2. It should be stressed that this is a preliminary calculation and is only a starting point for further work. Trading Symbol: GXM

(PRWEB) April 28, 2022 -- Geodex Minerals Ltd. (the ¡¥Company') is pleased to report results of an ¡¥in-house' resource calculation on Zone III at the Sisson Brook property in central New Brunswick. Zone III was one of the more significantly mineralized areas on the property reported by Texasgulf/ Kidd Creek Mines from their drilling in the period 1981 to 1983. The Company has re-assayed selected samples from existing core to verify the assays but the resource calculation is based primarily on this earlier information. Background data on the project is summarized in News Releases of November 8th, 2004 and April 5th 2005.

The inferred resource in Zone III is estimated to be 10.82 million tons of 0.151% WO3 and 0.073% MoS2. It should be stressed that this is a preliminary calculation and is only a starting point for further work. The estimate was made by David Martin, B.Sc., P.Geo., the Company's exploration manager in New Brunswick who has examined all the core and visited the area on site.

The resource is open along strike and to depth. It is based on 13 angled ¡¥BQ' drill holes by Kidd Creek Mines Ltd. in 1981 and 1982. The mineralized zone has been traced on surface for 600 m and with the deepest intersection to a vertical depth of 250 m. Holes were drilled on 100 m spaced sections. Original assaying was done by Bondar-Clegg in Ottawa, using AA (HNO3-HCL extraction) for MoS2 and calorimetric (thiocyanate extraction) methods for WO3.

Zone III in previous technical reports is said to comprise at least five separate subzones of scheelite-molybdenite- bearing quartz veinlets, bearing approximately 032 „a and dipping steeply to the west. The deposit occurs in both tuff and gabbro. The calculation was done using a Specific Gravity of 3.2 (from the same source) and an 0.05% Mo equivalent cutoff based on $US10.00 /lb molybdenum and $2.50/ lb tungsten.

Work will commence in June with I.P., ground magnetic and gravity surveys to define the limits of Zone III and to link it with the known copper-tungsten resources in Zones I and II to the north. It also appears to be connected with at least one major molybdenum-in-soils anomaly to the south and several untested I.P. anomalies.

Jack Marr, M.Sc., P. Geo., is the Qualified Person for this project as defined by National Instrument 43-101.

On behalf of the Board of Directors - Geodex Minerals LTD.

Jack M. Maris

For further information contact:
Christopher R. Anderson, Investor Relations
(604) 689-7771
Toll free 1-888-999-3500
Email: e-mail protected from spam bots

Posted by Industrial-Manufacturing at 01:37 AM | Comments (0)

QSI Offers Panel-Mount Version of the QTERM-G55 — Rugged Graphic Operator Interface

QSI Corporation, manufacturer of rugged operator interface terminals, announces the panel-mount version of the popular QTERM-G55 human-machine interface (HMI). The QTERM-G55 is a rugged, panel-mount HMI terminal using graphics and a keypad to interface with the user.

Salt Lake City, UT (PRWEB) April 28, 2022 -- QSI Corporation, manufacturer of rugged operator interface terminals, announces the panel-mount version of the popular QTERM-G55 human-machine interface (HMI). The panel-mount QTERM-G55 is the newest addition to QSI's family of award-winning Qlarity™ graphic terminals and is now available.

The QTERM-G55 is a rugged, panel-mount HMI terminal using graphics and a keypad to interface with the user. The terminal can be equipped with two EIA-232, -422 or -485 serial ports; Ethernet 10Base-T or a Power-over-Ethernet (IEEE 802.3af) interface. The QTERM-G55 has a 320x240 pixel, color LCD display measuring 96 mm (3.8") diagonal. (optional grayscale display available) and is viewable in most lighting conditions. Other industrial-grade features include 24-key or 40-key membrane / steel snap dome keypad with LEDs; 2 Mbytes flash / 16 Mbytes SDRAM; programmable speaker and real-time clock. The QTERM-G55 operator interface is ruggedized for use in harsh industrial environments (NEMA-4 pending, CE certified housing). The panel-mount terminal has an overmolded rubber boot, providing a superior seal, around an ABS polycarbonate plastic case. Terminal housing is available in blue, black or gray. The QTERM-G55 can be customized to be a part of your product with a custom key legend and company logo.

The QTERM-G55 operator interface uses an object-based graphic terminal programming language called Qlarity™ (pronounced Clarity). Designing a simple control panel interface or a complete stand-alone application has never been easier. The ability to use pre-defined objects, edit existing objects or author your own objects provides flexibility to the novice and expert alike. Qlarity Foundry™, a PC-based design tool, provides a Windows® environment for screen creation, application simulation, debugging and downloading to the QTERM-G55.

About QSI Corporation
Established in 1983, QSI Corporation is a manufacturer of rugged handheld, panel-mount and pedestal-mount terminals for industrial OEMs and commercial vehicle systems integrators. QSI’s human machine interface (HMI) and mobile data terminal (MDT) products include character and graphic terminals that are programmable, customizable, CE certified, and NEMA 4/12/13 rated. Numerous interfaces are available, including EIA-232, EIA-422, EIA-485, J1708, Ethernet and Power-over-Ethernet. Custom or semi-custom terminals withstand high levels of shock, vibration, humidity, and other environmental parameters. All QSI Corporation products are manufactured in the USA at the company's headquarters in Salt Lake City, Utah.

Graphic images of the QTERM-G55 can be downloaded from http://press.qsicorp.com. A QTERM-G55 data sheet can be downloaded at http://www.qsicorp.com/pdfs/data_sheets/qterm-g55-ds.pdf.

For more information contact:
QSI Corporation
Fax 801-466-8792
Email e-mail protected from spam bots
www.qsicorp.com or www.qlarity.com

Posted by Industrial-Manufacturing at 01:36 AM | Comments (0)

Doe Run Partners with Local Universities for Global Student Exchange Project

Students travel to Doe Run Peru to gain international experience and lend fresh perspectives on operations.

St. Louis, MO (PRWEB via PR Web Direct) April 27, 2022 -- The Doe Run Company recently embarked on an innovative cross-cultural educational program known as the Global Student Exchange Project with the University of Missouri, Rolla (UMR). Doe Run's unique position as a global leader in metallurgy gave UMR exchange students an opportunity to gain practical experience on an international level.

From March 27 through April 4, six UMR mining and civil engineering students traveled abroad to tour Doe Run Peru facilities and conduct field assessments of the company's La Oroya smelter and Cobriza mines. Doe Run provided housing accommodations for the students at the company's facilities in Peru, round-trip airfare, meals and in-country travel expenses. Later this year, Doe Run will welcome a group of Peruvian exchange students to its Southeast Missouri Mining and Milling Division (SEMO) in Viburnum, Mo. Not only will the trip help fulfill educational requirements, but it will also give the students an international advantage as they pursue mining education at Peruvian universities.

In addition to observing Doe Run Peru's mining and smelting operations, the multinational team will also study Doe Run's latest environmental innovations and community involvement in Peru. Upon completion of the project, expected late 2005, UMR students with their Peruvian counterparts will present Doe Run with a detailed report, including considerations for improving Doe Run Peru's efficiency and operations.

"This is a wonderful opportunity that allows our students to put their mining, metallurgical and environmental knowledge to work," said Jerry Tien, associate professor of mining and engineering studies at UMR. "Our students were interested to learn about Doe Run’s operations and were amazed to see their commitment to safety and community development. We're excited to apply our knowledge in these areas and determine if we can help Doe Run further improve its operations."

Doe Run Peru has invested more than $140 million on facility and environmental improvements since purchasing the Peruvian smelter from the government-run Centromin in 1997. The company continues to implement community programs in Peru, including those that support education, agriculture, health, sanitation and community sustainability. Meanwhile, the plant continues to work to reduce plant emissions, which are at historic lows.

"We're constantly looking for ways to improve our facilities, and this opportunity allows us a unique chance to get several fresh perspectives," said Bob Roscoe, co-general manager at SEMO and Doe Run's Cobriza Mine. "We’re excited to participate in a project that has the potential to enhance our facilities, while at the same time enabling students to gain the vital experience they'll need to compete at a global level. We've worked with UMR on several occasions and we're delighted to share our expertise with them to educate the next generation of metallurgists and mine engineers."

The Doe Run Company, along with its subsidiaries, is a privately held natural resource company
focused on environmentally sound mineral production, recycling and metals fabrication. Based in St. Louis, the company and its subsidiaries serve as North America's largest integrated lead producer and third-largest total lead producer worldwide, employing more than 4,000 people. The company and its employees are committed to keeping its operations and communities clean and safe while producing essential raw materials – lead, zinc, copper, gold and silver – that are needed for everyday life. Doe Run and its subsidiaries have U.S. operations in Missouri, Washington and Arizona, and South American operations in Peru. For more information, visit http://www.doerun.com.

Editor's Note: A photo of the UMR students in Peru is available in JPG format. Please contact Kristin Saunders at ksaunders @ standingpr.com or (314) 469-3500 for the file.

Christi Dixon
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 01:36 AM | Comments (0)

April 26, 2022

Solomon Completes Option of 20 Gold and Base Metal Projects in Mongolia

Solomon Resources Ltd (SRB:TSX-V) today announced that it has executed a Formal Option Agreement granting it options on each of 20 gold and copper projects in Mongolia, from Gallant Minerals Ltd.

Vancouver, Canada (PRWEB) April 26, 2022 -- Solomon Resources Ltd (SRB:TSX-V) today announced that it has executed a Formal Option Agreement granting it options on each of 20 gold and copper projects in Mongolia, from Gallant Minerals Ltd.

The Agreement includes Gallant’s most advanced gold projects, including Bayantsagaan, located 35 kilometres southwest of the Boroo Mine; the Onon gold project, southwest of the 17 million ounce Bayley Gold District; and the Zos Uul project, a Carlin-type gold discovery in southeast Mongolia. In total, Solomon has optioned 6 gold projects, 6 porphyry copper–gold projects, and 8 early stage gold and copper–gold projects. Most of the projects are located within the productive South Gobi Arc terrane (Oyu Tolgoi) or the Ervana Terrane (Erdenet Mine) as shown on the attached map.

Under the Agreement, Solomon has the option to earn a minimum 80% interest in each of the projects. Once Solomon has earned that interest, Gallant can then either participate on a joint venture basis with a 20% interest, or elect to convert its interest into an NSR royalty.

Gallant Minerals Ltd. was founded by Mr. Mohamed Al Fayed, and started exploration in 1997,by integrating advanced technology and rigorous field exploration to evaluate large tracts of the country, acquiring properties with potential to host major gold and porphyry deposits. Mr. Al Fayed stated “I am very pleased that Solomon has acquired our best gold properties in Mongolia. I am confident that they will rapidly advance these properties to achieve the full value and potential of each property.”

Keith Laskowski, President and COO of Solomon said “Mongolia is highly endowed with gold and copper, and its strategic location, next to major import markets of China make it one of the best places in the world to explore and develop. Many of Solomon’s new projects are close to the southern Mongolian border, proximal to entry ports into China. The Government of Mongolia continues to support a pro-investment, pro-development, and probusiness environment. We are very excited to have this chance to explore and acquire these properties from Gallant Minerals.”

The Option Agreement includes 37 exploration licenses covering 185,000 hectares of land in Mongolia (see map). The portfolio is divided into three major groups, based on the types of commodities sought and the level of exploration. The following table is a summary of the properties in Mongolia subject to the Option Agreement:

Solomon Mongolia Properties
Projects Licenses
Gold Projects 6 17
Porphyry and Base
Metal Projects 6 10
Prospects 8 10
Totals 20 37

Agreement Summary

Solomon’s Option and Financial Obligations
Under the Option Agreement Solomon has been granted an exclusive option to acquire 60% of the shares of a Mongolia holding company Braveheart Resources XXK, incorporated to hold the Projects. The option will be exercisable during a period of three years on the condition that Solomon makes the following payments and deliveries to Gallant and incurs the following expenditures on the Projects:

a. Solomon has delivered to Gallant on the execution of the formal Option Agreement (which deliveries have been made):
i. 1,000,000 common shares of Solomon
ii. a payment of US$110,000;
b. on or before April 18th 2006, Solomon shall complete US$1,000,000 of work expenditures on the Projects or pay any remaining balance to Gallant;
c. and deliver to Gallant:
i. US $200,000 worth of common shares of Solomon, and
ii. a payment of US$200,000;
d. on or before April 18, 2007, Solomon shall expend an aggregate of US$3,000,000 of work expenditures (including expenditures spent during the first year) on the Projects or pay any remaining balance to Gallant;
e. and deliver to Gallant:
i. US$450,000 worth of common shares of Solomon, and
ii. a payment of US$300,000;
d. on or before April 18, 2008, Solomon shall expend an aggregate of US$6,000,000 of work expenditures (including expenditures spent during the first and second years) on the Projects or pay any remaining balance to Gallant;
e. and deliver to Gallant US$400,000.

Further Option
Gallant has also granted to Solomon a second option, subject to Solomon making all payments and exercising its option to acquire 60% of Braveheart Resources, to acquire an additional 20% interest in any Project on which Solomon commits to spend, and then does spend, a further $1,000,000 on or before the fourth anniversary of the Closing Date.

Gallant’s Option to participate or Dilute or Convert to NSR Royalty
For any Project on which Solomon has earned an additional 20% interest, taking its total direct and indirect interest in that Project to 80%, Gallant may at its sole discretion then elect either to:

a. participate in all future expenditure on that Project on a joint venture basis pro rata to its remaining 20% , or
b. convert its 20% interest to an NSR Royalty.

If Gallant elects to dilute to an NSR Royalty on any Project, Solomon shall have the right to reduce the NSR payable to Gallant through purchase at a pre-determined price.

Finders Fee
Solomon has paid a finder’s fee of 200,000 common shares to an arm’s length third party at a deemed price of $0.37 per share in consideration of that party facilitating Solomon acquiring its interest in the transaction.

Qualified Person under National Instrument 43-101
Solomon’s CEO, Lawrence J. Nagy, P.Geol., a ‘qualified person’ for the purposes of National Instrument 43-101, has reviewed the information contained in and supervised the preparation of this news release.

Forward Looking Statements
Certain information regarding the Company contained herein may constitute forward-looking statements with the meaning of applicable securities laws. Forward-looking statements may include estimates, plans, expectations, opinions, forecasts, projections, guidance or other statements that are not statements of fact. Although the Company believes that the expectations reflected in such forward-looking statements are reasonable, it can give no assurance that such expectations will prove to have been correct. The Company cautions that actual performance will be affected by a number of factors, many of which are beyond the Company’s control, and that future events and results may vary substantially from what the Company currently foresees. Factors that could cause actual results to differ materially from those in forward-looking statements include market prices, exploitation and exploration results, continued availability of capital and financing and general economic, market or business conditions. The Company’s forward-looking statements are expressly qualified in their entirety by this cautionary statement.

About Solomon Resources Ltd.
Solomon Resources Ltd. is a Canadian public company focused on the acquisition, exploration and development of gold mineral properties world wide. The Company is managed by a proven team of explorationists credited with the discovery of a number of significant deposits in the world, including the SNIP Gold Mine and the Eskay Creek Mine in British Columbia and the Brewery Creek Mine in Yukon and the Segala Gold Deposit in Mali, West Africa.

Solomon’s shares trade under the banner SRB on the TSX Venture Exchange (TSX-V). Solomon’s other active mineral properties include three large contiguous projects located in the highly productive Eastern Goldfields of Western Australia: the former producing Kalgoorlie Southeast Project (KSP), the Newcrest-KSP J/V and the Harmony- Glandore J/V.

For additional information visit Solomon’s website at www.solomonresources.ca.

On Behalf of the Board of Directors of

Lawrence J. Nagy
Chairman & CEO
Contact Information - Toll Free Phone: 1-866-831-6666
Phone: 604-669-6656
Fax: 604-684-9877
Email: e-mail protected from spam bots

The TSX Venture Exchange does not accept responsibility for the adequacy or accuracy of this release.

Posted by Industrial-Manufacturing at 07:24 AM | Comments (0)

April 25, 2022

Nova - New, Compact, Industrial X-Ray Film Processor From GE Inspection Technologies Offers Superior Quality And Straightforward Operation

The new, competitively priced NOVA X-ray film processor is the latest addition to the GE Inspection Technologies’ range of field-proven processors. It has been specifically designed for ease-of-operation in NDT applications in industrial environments, from small service laboratories to demanding pipeline projects, where its compact size and light-weight design allow easy transportation and its low power consumption reduces operating costs.

Huerth, Germany (PRWEB) April 24, 2022 -- The new, competitively priced NOVA X-ray film processor is the latest addition to the GE Inspection Technologies’ range of field-proven processors. It has been specifically designed for ease-of-operation in NDT applications in industrial environments, from small service laboratories to demanding pipeline projects, where its compact size and light-weight design allow easy transportation and its low power consumption reduces operating costs.

The NOVA has a standard capacity to handle up to thirty 35 x 43cm (13.8 x 16.9 inches) films per hour and a range of developer immersion times from 12-150 seconds. It will find application throughout the NDT industry, from foundries to inspection companies. It is ideal for large scale pipeline inspections carried out by split teams. It can be used to upgrade laboratory systems from manual to automatic X-ray film processing and it will provide the necessary flexibility to companies who need a back-up processor or to complement their digital solutions.

With a footprint of just 0.4m2 (1.3ft²) and weighing only 80kg (176lb), the NOVA can be used as a table-top or free-standing model and can be easily fitted into a van for transport to site. It is ruggedly constructed in stainless steel, aluminum and PVC to ensure corrosion resistance in the most arduous of conditions and all external chemistry and water connections are neatly positioned below the film feed table. An intelligent power management system keeps energy costs to a minimum and a versatile, built-in transformer allows users to “plug in and play” from virtually any conventional mains voltage supply, worldwide.

Straightforward and simple operation has been a prime consideration throughout the development of NOVA. A standard, light-tight cover protects the feed table against the ingress of dust or dirt and allows the operator to turn on the lab light while the NOVA is processing film and a control display provides visual reference and easy setting of all process parameters, such as temperatures, dryer settings and process cycle. There is an automatic stop/start function and an OK light and buzzer indicates when the next film can be inserted.

Servicing is simple yet comprehensive and monitoring and diagnostics can be carried out on-site by GE Inspection Technologies technicians, operating on standard or customized service agreements, or remotely through an RS232 connection. On-site maintenance and servicing is also easy and all components which could need replacement during the lifetime of the unit are conveniently and readily accessible on the side of the NOVA processor.

The NOVA incorporates many of the outstanding features associated with GE Inspection Technologies’ film processors, such as “Intelligent Replenishment”. Five scanning rollers scan the film surface and an electronic pulse is emitted to initiate the feeding of fresh chemicals into the processing tanks. The processor is always ready for use, even if it has been idle for several hours. It is also extremely quiet in operation and, by using an infra-red drying system, where the heat is directed only at the film to be dried and not at the surrounding air, the working environment is maintained at a comfortable level.

Flexibility has also been built into the NOVA with the availability of a package of film processor enhancements. This “NOVA Comfort Kit” package includes a water-saving solenoid valve and circulation pump, which restrict the water consumption according to the film surface scanned. There is also a cartridge water filter for connection to the processor feed line and two 30 liter (7.9 gallon) replenishment tanks which can be stored under the optional table.

About GE Inspection Technologies
GE Inspection Technologies is a global leader in technology-driven inspection solutions that deliver customer productivity, quality and safety. The company designs, manufactures and services radiographic, ultrasonic and eddy current equipment to test materials without deforming or damaging them. Its products are used in a wide range of industries, including Aerospace, Power Generation, Oil & Gas and Automotive. The company has 11 application centers around the globe and offers a range of services including repair, calibration, training and upgrades. GE Inspection Technologies has 1,000 employees at more than 25 facilities in 25 countries worldwide. To learn more about GE Inspection Technologies visit www.GEInspectionTechnologies.com.

Posted by Industrial-Manufacturing at 05:47 AM | Comments (0)

April 22, 2022

CanAlaska Ventures Receives “MEGATEM II” Survey Results

Harry Barr, Chairman of CanAlaska stated, "CanAlaska holds one of the largest uranium exploration portfolios in the Athabasca Basin.”

Vancouver, BC (PRWEB via PR Web Direct) April 22, 2022 -- CanAlaska Ventures Ltd "CanAlaska" (www.canalaska.com) (TSX Venture: CVV – OTCBB: CVVLF) has received data plots for the "MEGATEM II" airborne electromagnetic and magnetic survey on its West McArthur Property.

The deep penetrating electromagnetic MEGATEM II survey has been successful in giving the Company detailed information on target zones on its extensive land position west of the McArthur River Uranium deposit. The "unconformity" target in this area is thought to be between 500 and 900 metres in depth, well beyond the penetration depth of previous survey technology, but within the depth capabilities of the MEGATEM II surveys

The survey has produced a series of distinct target zones across the Project. The Company is encouraged by the quality of the data received and the amount of detail now available to plan ground follow-up programs. The full survey identifies six conductive target zones and trends within the project claims. Four of the conductive targets are new, and were not identified by previous work in the area.

The data image for the Megatem II conductors is now available for viewing on the Company's website (See http://www.canalaska.com/s/Projects.asp?ReportID=104237#PageTop. The Company is planning the surface exploration program on the target areas. Surface geophysics is anticipated once the final data has been further interpreted. The summer prospecting work plan includes surface geology mapping, boulder tracing, and trace element soil geochemistry.

In other news, CanAlaska has completed VTEM airborne electromagnetic surveys over its Athabasca Lake property, located immediately south of the Uranium City region. The survey is testing the ability of the VTEM survey equipment to trace conductive horizons south of the lakeshore and under the predicted sandstone cover of the Athabasca basin sequence.

MEGATEM II survey results for the Moon Lake Project area, located approximately 35 km south of the McArthur project area, and 5 km from the Millennium Uranium deposit are being reviewed by the Company's geophysical consultant, S.J. Geophysics Ltd., for detailed recommendations.

The Company is continuing to receive and evaluate service contracts for further airborne surveys on the major properties within the 1,500,000 acres of property in the basin, as well as its outside uranium acquisition program.

This summer the Company intends to carry out ground surveys on a number of projects within the south eastern Athabasca basin, as well as a major surface program on the Charcoal-Hara and Snyder projects located North East of the basin edge, in an area straddling the Saskatchewan-Manitoba provincial border. Previous exploration within this area has indicated high priority radiometric targets for detailed follow-up ground surveys.

CanAlaska Ventures offers a Free Worldwide Uranium Headline News Update. To subscribe go to: http://www.canalaska.com/s/Projects.asp?ReportID=103681.

The Athabasca Basin hosts a number of major uranium deposits including Cigar Lake and McArthur River, two of the largest and highest grade uranium deposits in the world. Production from the Athabasca Basin accounts for 32% of the world's supply of uranium and this is expected to increase by the end of the decade. For the past two decades, uranium exploration within the Athabasca Basin has been at a relatively low level and it is evident that the potential for a discovery of other deposits remains high. CanAlaska's President Mr. Peter Dasler noted that, "before commencing our staking program, CanAlaska carried out a comprehensive analysis taking into account existing geological and geophysical data. As a result, the Company has identified and acquired properties that are well located and have considerable potential".

The Company and its shareholders are now positioned for what CanAlaska believes will be the largest expansion in uranium exploration since the 1970's. Harry Barr, Chairman of CanAlaska, stated, "CanAlaska holds one of the largest uranium exploration portfolios in the Athabasca Basin."

CanAlaska's technical team is progressively developing exploration targets and proposals for each of the projects within the Company's extensive land portfolio.

The qualified person for this release is Peter Dasler, P.Geo, President of CanAlaska Ventures Ltd.

About CanAlaska
CanAlaska is a mineral exploration company concentrating on the exploration and development of uranium, in North America the Athabasca basin of Saskatchewan. The Company has recently assembled a large land package (over 1,500,000 acres) in the Athabasca Basin for Uranium exploration.

On behalf of the Board of Directors
Peter Dasler

The TSX Venture has not reviewed and does not accept responsibility for the adequacy or accuracy of this release: CUSIP#137089108.

This news release contains certain "Forward-Looking Statements" within the meaning of Section 21E of the United States Securities Exchange Act of 1934, as amended. All statements, other than statements of historical fact, included herein are forward-looking statements that involve various risks and uncertainties. There can be no assurance that such statements will prove to be accurate, and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from the Company's expectations are disclosed in the Company's documents filed from time to time with the British Columbia Securities Commission and the United States Securities & Exchange Commission. Not to be construed as an offer to buy or sell securities of CanAlaska Ventures Ltd.

Investor Relations
Toll Free 1-800-667-1870

Posted by Industrial-Manufacturing at 07:26 AM | Comments (0)

April 21, 2022

Inpro/Seal Revises Its Introduction to Bearing Isolators Literature to Make it Even More Valuable to Plant Maintenance People

This is a reference, written by the inventor of the product and is worded in easy to understand language. It includes important and useful information on the evolution of the bearing isolator, including: how and why it was invented; how it works; how and why contact seals fail in a short period of time; how to eliminate catastrophic failure; how to reduce power consumption in rotating equipment; costs; maintenance; configurations and much more.

Rock Island, IL (PRWEB) April 20, 2022 -- Inpro/Seal Company has announced a revision to its highly successful brochure, “Introduction to Bearing Isolators, A short lesson in bearing isolation”.

Valuable Information
Authored by David C. Orlowski, well known for his knowledge of bearings, bearing protection and tribilogy, the literature is a valuable source of information and useful tool to anyone involved in the management, maintenance, repair and operations (MRO) of motors, machine tool spindles, turbines, fans, gear boxes, paper machine rolls, pumps and other types of rotating equipment used in industrial/process plants.

Authored by Industry Expert
President and founder of Inpro/Seal Company, Orlowski has spent the last 41+ years working on ways to enhance and extend the service life of rotating equipment. In 1977, he received patent protection (#4,022,479) for the bearing isolator. (He also invented the term “bearing isolator” in the process.) In addition, he holds more than 40 other isolator related patents, some of which go out until 2018 and longer.

Importance of Research and Feedback
According to Orlowski, “For over 27 years Inpro/Seal has never stopped developing ways to help companies increase productivity and improve their bottom line. To this end, our manufacturing complex is the largest of its kind in the world devoted to the engineering, research, improvement, testing and manufacture of bearing isolators.”

Orlowski continued, “A very important aspect of our new technologies is direct end user feedback. Last year, we completed a two-year end-user based research project that was conducted on a market-by-market, application-by-application analysis. The end result of this research was that end users wanted to know a lot more about bearing isolators. “

“Whether they used bearing isolators or not, whether or not they read our literature or advertising messages, the majority of the respondents simply stated that they wanted to know more about the basics of the product. As a direct result of this research, we developed a brochure, “Introduction To Bearing Isolators, A short lesson in bearing isolation”.

Orlowski concluded by saying that, “Based on feedback, request and need, we have revised our reference to include additional technical information, artwork and drawings. It represents a major investment on our part to inform end users how bearing isolators eliminate the root cause of rotating and related equipment failure - moisture, dirt and abrasives contaminating the bearing environment.”

Unique Reference
What makes this reference unique is that it is written by the inventor of the product in easy to understand language. It includes important and useful information on the evolution of the bearing isolator, including: how and why it was invented; how it works; how and why contact seals fail in a short period of time; how to eliminate catastrophic failure; how to reduce power consumption in rotating equipment; costs; maintenance; configurations and much more.

What is a Bearing Isolator
A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they don’t separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in.

Inpro/Seal protected bearings have been known to run 150,000 hours (17 years) or more, eliminating the need for continual maintenance and repair. Documented cases show that a plant can easily double the mean-time-between failure (MTBF) and reduce maintenance costs by at least half, with users reporting an extremely high ROI (Return On Investment). Bearing isolators are installed by OEM’s, retrofitted on existing equipment or specified by end users. Approximately 1.6 million have been installed and most are still in operation in process plants around the world.

Inpro/Seal Products
Recent developments include: the only product that protects rolling element bearings on paper machines from the wet end to the dry end; IEEE-841 motors that use bearing isolators as part of their specification and set the standard for motor bearing protection; the VBX-H Series that protects machine tool spindle bearings from coolant, chips, humidity and heat; the OM 32 that optimizes oil mist applications by eliminating stray emissions, environmental and housekeeping issues; and the Air Mizer™- PS, a dry sealing system provides a positive seal in applications where dry particulates, powders and bulk solids are handled, processed, packaged and stored.

About Inpro/Seal
Inpro/Seal Company is the originator and the number one manufacturer of bearing isolators, used to protect motor and pump bearings, machine tool spindles, turbines, fans, gear boxes, paper machine rolls and many other types of rotating equipment. Additional applications include the handling, processing, packing and storage of dry particulates, powders and bulk solids.

As the recognized global leader in bearing isolator technology, Inpro products are marketed to the petroleum, refining, nuclear, power generation, metalworking, food processing, grain processing, chemical, water, wastewater treatment, metalworking, automotive, hydrocarbon processing, HVAC, pulp and paper, mining, mineral, ore processing and general industrial markets around the world.

To receive a copy of – “Introduction to Bearing Isolators”, contact: Inpro/Seal Company, P.O. Box 3940, Rock Island, Illinois 61204. Phone numbers are: (800) 447-0524 or (309) 787-4971. Fax number is: (309) 787-6114. Website: www.inpro-seal.com or www.bearingisolators.com

The Mark Baker Company
4124 Quebec Avenue N
Minneapolis, MN 55427
Mark Baker (763) 537-7540

Inpro/Seal Company
P.O. Box 3940
Rock Island, IL 61204
David C. Orlowski
(309) 787-4971
(800) 447-0524

Posted by Industrial-Manufacturing at 03:14 AM | Comments (0)

April 19, 2022

Bedford Resource Partners Stake 1.7 Billion Ton Iron Ore Property

Bedford Resource Partners have staked 99 claims in Quebec, 100 miles north of Schefferville that cover the Lac Otelnuk iron ore deposit.

(PRWEB) April 18, 2022 -- Bedford Resource Partners of Toronto, Canada have staked 99 claims covering 11,767 acres in north central Quebec, 100 miles north of Schefferville. They hold title to the Lac Otelnuk iron ore deposit which is a Lake Superior type meta-taconite formation within the Sokoman iron formation in the Labrador Trough. It is identical to the deposits of the Wabash Lake and Mount Wright mines further south.

The strongly magnetite property is a 1.7 billion ton iron ore deposit @ 33.4% Fe. Historical estimates indicate it hosts 10-12 billion tons @ 30 % Fe.

Fabio P. Micacchi, managing partner, stated "This is an exciting opportunity for us, but because the project is so large we will seek JV partners."

The global demand for iron ore is strong partly due to China's economic growth.

“China expects to face shortages in more than two-fifths of production materials, including iron ore and crude oil, in the first half of this year because of rising industrial production. China’s production won't meet demand for 43 percent of 300 types of materials surveyed by the trade ministry, the Beijing-based Ministry of Commerce said…” Bloomberg (Koh Chin Ling) April 11/05.

Canada will have to increase it's iron ore production.

"In the next 10 years," R. Martin, CEO, New Millenium Capital Corp. said, "We’re going to need new mines that are equivalent to 10 times what Canada produces today."

There has been a total of 5 iron ore Canadian transactions recently that indicate market interest in iron ore projects. They are: Baffin Island, New Millenium Capital Corp., Palladon Ventures, Ungyva Mining, and New American Gold.

King Resources, the former holder of the Lac Otelnuk property completed extensive exploration with an preliminary feasibility study in 1975 using $21.00 / ton for pellet pricing. It reported a return of investment of 15%. The current iron pellet pricing is approximately $70.00 / ton.

Bedford Resource Partners is a privately held firm.

This announcement appears as only a matter of record.

Posted by Industrial-Manufacturing at 03:52 AM | Comments (0)

April 17, 2022

“Health Forum” Show to Feature Memry Corporation Shape-Changing Technology for Medical Devices

Memry Corporation creates commercial applications for the emerging shape memory alloy industry.

(PRWEB) April 16, 2022 -- In 1983, Memry Corporation was founded in Stamford, CT, to create commercial applications for the emerging shape memory alloy industry. Through the years the corporation has evolved its alloys and business models. In 1992, Memry was already producing the memory shape alloy components and had a business model of OEM supplier of semi-finished materials. After several corporate movements, Memry has become one of the only companies in the shaping memory industry to process its own raw materials in addition to delivering a finished component. Its clientele includes companies in the medical, industrial, commercial, defense and device markets.

All alloys fabricated in Memry factories comply with ASTM Standard F2063 ‘Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants.’ It manufactures a total of eight grades of commercial nitinol alloys. Each one is melted according to corporate proprietary and stringent specifications. At the facilities the alloys are then transformed to semi-finished products such as wire, tube and strip. Overall, Memry offers semi-finished products, engineered products and process service capabilities.

As for the medical device industry, Memry’s product applications include those for interventional surgery (cardiology, neurology, radiology and vascular), urology, OB/GYN, gastroenterology, endo-surgery, flexible endoscopy, orthodontics, endodontics, orthopedics and eyeglass wear. Memry continues to develop quality products that are consistently evolving and advancing to improve the medical industry.

Memry has dedicated decades to research and development of quality materials. According to James Binch, president, “Memry’s objective is to become the world leader in developing and processing shape memory materials with high quality and significant user value.”

For more information, see http://www.memry.com/.

Posted by Industrial-Manufacturing at 11:39 PM | Comments (0)

April 14, 2022

NaturalNano President Michael Riedlinger Unveils Proprietary Applications for 'Halloysite Nanotubes' at Stephens Inc. 2005 Nanotechnology Investors Conference

New proprietary commercial applications of "halloysite nanotubes" were presented today by NaturalNano Inc. President Michael Riedlinger at the 2005 Stephens Inc. Nanotechnology Investors Conference in Pasadena.

Pasadena, CA (PRWEB) April 14, 2022 -- New proprietary commercial applications of "halloysite nanotubes" were presented today by NaturalNano Inc. President Michael Riedlinger at the 2005 Stephens Inc. Nanotechnology Investors Conference in Pasadena.

He also presented dramatic new electron-microscope images showing halloysite nanotubes as they exist in naturally formed clay. "Historically, halloysite clay has been used for production of fine china tableware, but not until there was a close examination of the material were the halloysite nanotubes discovered in it," said Mr. Riedlinger.

Halloysite nanotubes are ultra-tiny tubes consisting of silicon, aluminum, hydrogen, and oxygen. They typically measure under 100 nanometers (billionths of a meter) in diameter and are extracted from naturally formed clay. NaturalNano has purchased 500 tons of this clay from Atlas Mining Company (OTC BB: ALMI, www.atlasmining.com) for processing.

Halloysite nanotubes offer a broad array of industry applications, he explained. "For example, they can be used for radio-frequency shielding using a patent-pending, proprietary metallization coating process. Our scientists have also developed proprietary technologies for extracting and separating the nanotubes from clay and classifying them in different diameters and lengths. That now allows these nanotubes to be used for a wide range of applications, such as cosmetics, electronics and microcircuitry, and additives for paints, polymers, plastics and composites. We have identified more than 100 applications of halloysite nanotubes in our patent applications filed to date and our scientists are working on a large number of additional applications."

A webcast of Mr. Riedlinger's slide presentation and talk today is available at www.naturalnano.com/stephens.htm until May 6, 2005.

The two-day conference brought together leading nanotechnology companies and a range of guest speakers with a mix of scientific, investment, and industry experience. Delivering the keynote address was Dr. Michael L. Roukes, Founding Director of the Kavli Nanoscience Institute at the California Institute of Technology (Caltech).

About Stephens Inc.
Stephens Inc. is a full service investment banking firm headquartered in Little Rock, Arkansas. Founded in 1933, the firm serves a broad client base that includes corporations, state and local governments, financial institutions, institutional investors and individual investors throughout the United States and overseas. The firm is self-clearing and a member of the New York Stock Exchange. Stephens' services include investment banking, money management, wealth management, securities underwriting, equity research and general securities brokerage and trading. More information about the 2005 Stephens Inc. Nanotechnology Investors Conference can be found at www.stephens.com/research/conference-information.

About NaturalNano
The primary business of NaturalNano (www.naturalnano.com) is processing, developing and commercializing naturally occurring nanomaterials. The company is developing state-of-the-art, proprietary processes for extracting and separating nanotubes from halloysite clay. NaturalNano has entered into a joint development agreement with Atlas Mining Company. It is also engaging in business alliances with other organizations to bring its nanotechnology materials to market.

For more information, please visit www.naturalnano.com.

Press Contacts:
NaturalNano Inc.
Lisa Martin
e-mail protected from spam bots


Jennifer Gould
e-mail protected from spam bots

Posted by Industrial-Manufacturing at 04:46 AM | Comments (0)

April 11, 2022

Battery Reconditioning Company Has Unprecedented Success

Battery Doctors, a premier battery reconditioning service, has found unmatched success by having the only product that can successfully recondition lead acid batteries, thereby saving consumers money and conserving environmental resources.

(PRWEB) April 11, 2022 -- Battery Doctors, a premier battery reconditioning service and a division of ProTec International, LLC, has found unprecedented success by developing the only product that can successfully recondition lead acid batteries. Reconditioned batteries cost a fraction of a new battery and conserve environmental resources by reusing otherwise functional batteries.

Battery Doctors has found that their distinctive product has virtually no competition in the U.S. and International markets. While various methods for extending battery life have been tested and explored, Battery Doctors has developed a method of reconditioning the battery without taking it apart. Most batteries die prematurely due to hard sulphate build-up on the plates. Battery Doctors uses a non-hazardous chemical “ProBat” and a specifically designed charger “ProCharge” to safely remove the harmful lead-sulphate from the plates and inhibit its reoccurrence.

“There is a tremendous need for lead acid batteries in this $17 billion dollar worldwide market,” said Marc Keith, Director of Product Development for Battery Doctors. “We can hardly keep up with the demand for reconditioned batteries and that’s a good thing.”

There are over 1,100 Battery Doctors operators worldwide that provide reconditioned batteries for automotive, marine, heavy equipment, industrial applications, hospitals, farms, and the military. Battery Doctors expects continued growth of their product as their operator base expands.

The benefits of Battery Doctors reconditioned batteries include:
• More affordable batteries
• Longer lasting batteries
• Battery life extender that prevents vehicle downtime
• Battery Doctors Operators provide additional testing and services
• Full replacement warranties

Find more information on Battery Doctors reconditioned batteries or about becoming an owner-operator by visiting www.BatteryDoctors.com.

About Battery Doctors
Battery Doctors, a premier manufacturer of reconditioned batteries, is committed to providing the highest quality reconditioned batteries with unparalleled customer service and teamwork. They are conscientious about environmental responsibility and are determined to offer the general public and business owners a high quality, dependable alternative to new battery replacement.

About ProTec International, LLC
Formed in 1988, ProTec International is a privately held California-based research and development company specializing in the design of practical, cost-effective and environmentally safe technologies for industrial, commercial and consumer applications. ProTec also licenses synergetic technologies that complement its proprietary product lines. They are a member of the World Trade Center.

Posted by Industrial-Manufacturing at 03:35 AM | Comments (0)

Asia’s Largest Producer Of Aluminium Joins Hands With Foodco

“Agreement With Hindalco To Benefit Regional Consumer” – Al Dhahery

(PRWEB) April 11, 2022 -- The Abu Dhabi National Foodstuff Company (Foodco) signed an agreement with Hindalco, Asia's largest integrated primary producer of aluminium, formalising a commercial relationship to produce the Wrap ‘n’ Roll brand of aluminium foil rolls for distribution within the UAE and for re-export to the neighbouring markets.

Foodco’s Managing Director, Ahmed bin Ali Khalfan Al Dhahery signed the agreement along with Hindalco’s General Manager, Debashis Pati at a meeting in Abu Dhabi yesterday (9th April).

“This commercial venture will ensure a steady and high quality supply of aluminium foil rolls to the UAE, while Foodco through its extensive distribution network and supplier base will undertake sales and marketing of Wrap ‘n’ Roll aluminium foil rolls which will be produced to international specifications,” said Mr. Al Dhahery.

He added that there was a considerable demand for high quality aluminium foil rolls in the UAE and the region from the corporate hospitality industry as well as end users. “There is a dearth of high quality aluminium foil rolls in the regional market and the companies that are supplying aluminium rolls are either of a very inferior grade or are too highly priced and this has created a vacuum in the market. We are positive that our agreement with Hindalco, who are the most cost-efficient producers of aluminium globally, will eventually benefit the regional consumer and help us deliver on our promise of providing genuine satisfaction to the consumer,” Mr. Al Dhahery remarked.

“We are delighted to partner with Foodco, one of UAE’s leading FMCG companies involved in foodstuff distribution operations,” said Mr. Pati. “This agreement is in line with our corporate strategy to promote our products and create new markets through pro-active partnerships,” he said.

Over the years, Hindalco’s name has become synonymous with quality and pulls the entire aluminium market upwards. “Our stringent quality control standards, have ensured that a Hindalco-certified product, assumes very high credibility internationally,” Mr. Pati observed.

The initial production run for Foodco will comprise 86,000 cases per annum of varying gauges from 12 microns to 19 microns and roll measurements would range between 7.7 meters and 61 meters.

Hindalco Industries Limited, a flagship company of the Aditya Birla Group, is structured into two strategic businesses - aluminium and copper - and is an industry leader in both segments. A non-ferrous metals powerhouse, of global stature, the INR 8,196 crore (consolidated revenues - FY 2004) company's integrated operations and operating efficiency have positioned Hindalco as India's largest integrated player in aluminium. It ranks among India's top ten companies in terms of market capitalisation.

Hindalco commenced its operations in 1962 and has grown into the largest integrated aluminium manufacturer of India. In India, Hindalco enjoys a leadership position for aluminium and downstream products. Hindalco’s aluminium division's product range includes rolled products, extrusions, foils, alloy wheels and primary aluminium ingots, billets and wire rods.

Besides being a dominant player in the Indian aluminium market, Hindalco's products are well accepted in international markets. Its aluminium metal is accepted for delivery under the High Grade Aluminium Contract on the London Metal Exchange – the global hub for non-ferrous metal trading. All of Hindalco's units are ISO9001 and 14001 certified, while several have also attained the OHSAS 18001 - the occupational health and safety certification.

The world average per capita consumption of aluminium is estimated 5 kg and the western world average is estimated to be around 20 kg.

Foodco is a public shareholding entity that operates under the patronage of His Highness Sheikh Khalifa Bin Zayed Al Nahyan, the President of the UAE. The company is head quartered in Abu Dhabi with branches in Dubai and Al Ain.

Prominent among Foodco’s portfolio of brands include Virginia, Shehrazade, Mubarak Basmati Rice, Hafeet Spring Water, Quick Tea, Karkade Cordial Drink, F Tissues, Al Safwa Powder Milk, Danchi Chicken, Master Food and Master Chef range of food products.

For more information, please contact:
Ajay Rajguru
Tel: +971 4 332-0888
Fax: +971 4 332-0999
Email: e-mail protected from spam bots

Posted by Industrial-Manufacturing at 03:34 AM | Comments (0)

April 07, 2022

Las Vegas Sunshine Illuminates Warmer Business Climate

Lovejoy, Inc. Detects Positive Upturn at Trade Show

(PRWEB) April 7, 2022 -- The sun is shining and the temperature rising in domestic manufacturing, according to all indicators detected by Lovejoy, Inc. executives attending the ConExpo-Con/Agg 2005 trade show this past month in Las Vegas, Nevada.

Senior executives from the company pinpointed a few key signals that the business climate is improving for the manufacturing, aggregate, construction and mining industries. These indicators include: show attendance in terms of quality and quantity, the size and type of equipment displayed at the show, and the number of serious inquiries with intent to purchase.

Serious Buying Mood
In terms of attendance, most corporations sent personnel from design, engineering or purchasing departments. According to Jim Mahan, Director of Engineering for Lovejoy, Inc., “The high quality of the personnel companies sent to represent themselves at the show demonstrates a positive attitude. When the economy slows down, companies might send the end user or influencer, but not the purchaser or specifier, because funds are held more closely and purchasing decisions are delayed.”

In addition, Mahan noticed many booths displayed large equipment clearly designed and manufactured with a better market outlook in mind. “The type of equipment on display was specially manufactured. These are not stock items. Companies build these specialty pieces expecting to sell them before or after the show, and from multiple conversations we had and our own experience with customers, the equipment did sell and further orders ensued.”

Rich Kasprzyk, Lovejoy Sales Engineer for the ROSTA® line of suspension systems and motor bases, concurred with Mahan’s assessment of the show. “The quality and quantity of attendees was great. We came away with several leads and requests for quotations from across the country.”

Not only that, said Kasprzyk, “The mood was definitely upbeat and very positive. Everyone indicates the economy is looking up.”
Going Beyond the Game Plan

At its booth, Lovejoy, Inc. concentrated on displays showcasing the quality of ROSTA® suspension systems and motor bases, tensioners, dampening and vibration-limiting parts and equipment for the aggregate and mining industries. In addition, the company introduced a new line of LV-Torsional couplings, designed and built to offer an inexpensive, economical alternative for the agricultural market and off-highway industrial equipment industry.

The enthusiasm at the show and a meeting of creative minds spurred additional uses and applications for the LV-style torsional couplings that were not even in the original plan, said Mahan. Lovejoy engineers and product managers will be working on these additional applications in the months to come. In particular, Mahan indicated that companies that deal with equipment for road maintenance and repairs expressed great interest in Lovejoy couplings available for both Diesel engine and hydraulic applications.

Two different styles of the new coupling are available; the LV-torsional coupling for u-joint drive systems and LV-C for direct-drive systems. Agricultural usage would attach this style coupling to Diesel engines driving deep well and centrifugal pumps, while the industrial industry uses this type coupling on engines that run hydraulically powered portable compressors.

The Lovejoy Torsional coupling type-LV line horsepower range is from 150 to 625 at 1800 RPM, with five available sizes. The LV-C type coupling horsepower ranges from 50 to 425 at 1800 RPM and is available in six sizes.

For the Lovejoy/ROSTA® product line, the company gained insight into a better understanding of the MRO and OEM needs as they relate to adapting the various products.

Several different demonstrations at the booth help illustrate for attendees the superior engineered quality, durability and performance capabilities of the Lovejoy/ROSTA® products. One displayed a rice or bean shaker mounted on AB elements to illustrate stability. Another product that lends stability and improves safety is ROSTA® mountings that eliminate vibration on stairs and shaker screen structures, demonstrated with actual stairs visitors could climb to test the product.

Back on Track
Not only did Lovejoy executives make contact with new distribution channels, the show offered an excellent opportunity to build relationships with new vendors who supply raw materials for Lovejoy’s domestic manufacturing operations.

“All in all we believe that U.S.-based domestic manufacturing and service companies are going to experience a better year,” said Mahan. “That’s one of the best outtakes from this show, that domestic manufacturers and industrial operations have weathered the storm and are working together to pump up the overall economy.”

Founded in 1900, Lovejoy enjoys an international reputation as the leading company specializing in flexible coupling design and development. Lovejoy products are available worldwide through distributors in North America and 55 other countries, supported by Lovejoy offices and support staff in Canada, Europe and the USA. Lovejoy, Inc. is certified under the ISO-9001:2000 International Standards for Quality Management.

For more information, visit Lovejoy’s Web site at www.lovejoy-inc.com, or contact Lovejoy, Inc., corporate offices at 2655 Wisconsin Ave., Downers Grove, IL, 60515, USA. Phone 630-852-0500; fax 630-852-2120; e-mail inquiries e-mail protected from spam bots.

Posted by Industrial-Manufacturing at 03:21 AM | Comments (0)

Space Bag and Food Saver vs The BagButton

BagButton replaces the Space Bag the food saver and the garbage compactor with the economical twist of useing your own garbage bags.

(PRWEB) April 7, 2022 -- With the BagButton a vacuum and your garbage bags you will save space vacuum pack food and compact garbage all most free. An economical space saving and vacuum packing solution is hear, it's like getting the space bag and food saver free, and being able to use it on almost anything, including your garbage.

This story was written by Kelly Ruhoff Staff Reporter for Stanwood/Camano NEWS Washington

Family Inventors See Success in the Bag
BagButton could become as familiar to homeowners, travelers, and hikers as Velcro, bungee cords, and duck tape did in the last quarter-of-a-century. The idea developed out of desperation, but this innovative family hopes their money-saving gadget will also button up their independence. In 1997, Larry Storey and Heather Kendall-Storey, along with their two young children, began living in a leaky, old mobile home on eight acres near the inlet to Lake Ketchum in Stanwood, waiting for building permits to be approved from Snohomish County. “We fought the county for about five years,” explained Storey.

Storey, 46, was left partially paralyzed on his left leg and completely on his left arm after a motorcycle accident 18 years ago, yet remained in the building trade. Meanwhile, the couple planted about 400 trees on their property to comply with environmental protection laws so they could build their home, while trying to save belongings in their rapidly-decaying home. “We just started losing everything”, said Storey. They attempted to preserve items in garbage bags, but moisture soon found it’s way inside, causing mildew to form.

Ads on TV for the Space Bag, a waterproof, airtight vacuum bag, caught their attention, but they were too expensive for the family—with the amount of bags they needed. So, the couple began brainstorming ideas on how to devise a cheaper alternative. They started with a lid from a five-gallon water bottle regularly delivered to their home. They used the lid as an o-ring, placing it on the opening to a garbage bag and fanning it out to make a bouquet. With the hose of a vacuum cleaner turned on, they placed it over the o-ring and saw the possibilities begin to take shape. It began sucking air out of the bag to make it smaller and airtight. “It worked really super,” said Storey.

Several modifications later, accomplished even during the building of their two-story stucco home, they applied for a patent. “The amount of engineering is absolutely phenomenal,” said Storey. Financed by two second-mortgages on their home for the product’s development, manufacture and packaging, they began test marketing the BagButton on the World Wide Web last fall. Big companies began vying for the product rights, but the financial arrangement would have left the family holding an empty bag, paying more to the State of Washington than what they would have made.

“To see what the public would actually pay, we got on auction sites and got as much as $20,” he said. “We sold about 1,000 last fall.” They dropped the price to $14.95 and got their own Web site. With the help of banner ads, they began selling 200 a day. “They’re going like crazy,” said Storey. “It’s just amazing how it’s taken off—totally thrown me for a loop.”

The BagButton works ideally with a cheap vacuum, reducing a pillow to three-quarters-of-an-inch, said Storey. It also works well for sleeping bags, clothes storage, and for efficient suitcase packing, said Kendall-Storey.

“There’s so many places we haven’t even thought of where this product could be used,” she said. Best of all, cheap garbage bags can be used, compared to the price of a Space Bag at $20, said Kendall-Storey. Still, keeping up with demand proved difficult. The couple even enlisted the help of their children Tia, 7, and Tristen, 3, and Nick, 22, from Storey’s first marriage, to help them package their product, but remained overwhelmed. So, at the beginning of the year, they pulled back on their ads to re-think their goals.

Kendal-Storey made arrangements through her father in Portland for a company to help manufacture their product and for another Oregon company to package it. Within the next month, they’ll receive their first order of approximately 10,000 pre-packaged products. “We have about $485,000 into it so far,” said Storey. “If it doesn’t work—we’re both getting jobs!” added Kendall-Storey.

The BagButton can be purchased at QFC/Kroger, Bartell Drugs, Surgard Storage, Urban Storage,Fort Lewis WA., Participating True Value Hardwares,We have been accepted by Winn Dixie and are wating for air time on HSN, Home Shopping Network.

No matter how hard the bigger companies try to keep the BagButton from entering into there market, this economical solution to the consumer that the BagButton inherently provides has and will Prevail. The BagButton will elimanate the need to purchase the Space Bag, reduce the need to purchase the food saver and will always compact your garbage.

The company BagButton.com was formed in 1996, then received our certificate of formation as BagButton LLC. February 09 2004 in Washinton State. From 1996-2004 we went through the patent process and several mold changes and intered in the market on March 29th 2004. We are into our second year of manufacturing and distribution and coming on strong.

Larry Storey is available for interviews at (360) 939-2469

Posted by Industrial-Manufacturing at 03:18 AM | Comments (0)

Garnet Point Options Boulder Creek Uranium Deposit from Full Metal

Vancouver, BC (PRWEB) April 7, 2022 -- Garnet Point Resources Corp. (TSX.V: GRC); (OTCBB: GRCDF) is pleased to announce that it has optioned up to an 80% interest in the Boulder Creek Uranium Deposit, Alaska from Full Metal Minerals.

Garnet Point can earn an initial 70% interest, subject to regulatory approval, in the Boulder Creek and McCarthy Marsh Properties by completing US$2,000,000 in exploration expenditures over four years (first year, US$150,000), making cash payments totaling US$90,000 (first year, US$60,000), and issuing 500,000 shares in Garnet Point (200,000 first year). After earn-in, Garnet Point can receive an additional 10% interest (80% total) by issuing an additional 500,000 shares in Garnet Point and by completing a positive feasibility study. Full Metal will be operator for the project during the first year of exploration for a 10% management fee.

The 6,240 acre Boulder Creek Property hosts Alaska’s largest uranium deposit discovered to-date. It is a sandstone type ‘roll-front’ deposit with predominantly epigenetic mineralization. Uranium was leached from a Late Cretaceous alkalic quartz monzonite and deposited in roll fronts mode within a reducing environment of Paleocene, arkosic, carbonaceous conglomerates and sandstones of the Boulder Creek Basin. The property is located in the southeastern Seward Peninsula, Alaska, 160km northeast of Nome, and 16 km north of the village of Elim and tidewater.

Previous operators completed 3,300m of core drilling in 52 holes and about 60m of near-surface split tube sampling in 21 holes, focused on the Discovery Zone area. Surface grab samples reported by previous operators returned up to 34% U3O8. A resource estimate completed in 1981 by Houston Oil and Minerals outlined a resource of 1 million pounds of U3O8 in zones with an average grade of 0.27% U3O8 and an average thickness of 3 meters. This resource was completed prior to NI 43-101, has not been independently audited and should therefore not be relied upon. The historic resource occurs within a 1,000m by 100m area, with depths ranging from the surface to 120m within a northwest trending mineralized zone.

The 6,720 acre McCarthy Marsh Property is an additional roll-front target, staked to cover prospective basin rocks adjacent to Tertiary granites, approximately 15 kilometers southwest of the Boulder Creek Property.

Garnet Point and Full Metal are planning an airborne geophysical and radiometric survey to identify additional targets in the area, as well as surface soil and biogeochemical sampling to define drill targets.

Information contained in this release for the Boulder Creek and McCarthy Marsh Properties was reviewed by Robert McLeod, M.Sc., P.Geo. Vice-President of Exploration for Full Metal Minerals and a Qualified Person as defined by NPI 43-101.

Garnet Point is expanding its focus to include Uranium and base metal exploration with the addition of the the Boulder Creek and McCarthy Marsh Properties to its current portfolio of properties which include the Arcadia, Mac and Cache Properties in Nunavut optioned from Full Metal Minerals Ltd.

Garnet Point will begin a 1,500-metre diamond drilling program in July, 2005, at the Arcadia property, located in Nunavut. Drilling will step out from previous intercepts at the GHX vein including - 29 g/t Au over 5.6 metres and 12 g/t Au over 23.1 metres. At Arcadia, over 20 veins/structures with over five-gram-per-tonne-Au samples have been discovered to date. Garnet Point has an option to earn a 51-per-cent interest in the Arcadia property from Full Metal.

On Behalf of the Board of Directors,

“Aly B. Mawji”

Aly B. Mawji
President and Director

Posted by Industrial-Manufacturing at 03:16 AM | Comments (0)

April 06, 2022

Schneider Filter Technology from Shape Technology

Expanding their product range, Shape Technology will act as the sole licensor in the Americas, Europe, Africa and Asia Minor for Schneider® Filter Technology.

(PRWEB) April 6, 2022 -- Schneider Filter Technology is an essential element in the rolling of all metals, particularly for aluminium. The very high levels of filtration achieved for both mineral oils and emulsions maintains the coolant in ‘as –designed’ condition, providing an exceptional long life for the coolant and superior sheet and foil quality. Specific system design features and auxiliary components are unique to the technology.

Shape Technology will market and manufacture Schneider® filters under a licensing arrangement with the J R Schneider Company of the USA.

Shape Technology will provide the sales force, marketing power, design, build, installation and servicing to all new, and over one thousand existing, Schneider® clients world wide.

The Schneider® Filter Technology fits perfectly into Shape Technology’s existing portfolio of products, which now includes:- Shapemeters, Coolant & Hot Edge Spray Systems, Width Gauge & Crop Shear Systems, Wire Rod, Bar & Section Profile Gauges, The ABB® U-Gauge and Schneider® Filter Technology.

For further information please contact: Shape Technology Ltd. Technology Centre, Aviation Park West, Bournemouth International Airport, Christchurch, Dorset, BH23 6EW, UK.

Tel: +44(0)1202 331400, Fax: +44(0)1202 581384
www.shape-tech.com e-mail e-mail protected from spam bots

Posted by Industrial-Manufacturing at 04:27 AM | Comments (0)

Gold-MiningStocks.com Reports – Industry Expert Forecasts for Gold Stock Investment Strategies

Economic Indicators for Gold Stock Investors to Consider: Currency Fluctuation, Production Costs, and Exploration Activity

POINT ROBERTS, WA; Delta, B.C. (PRWEB) April 6, 2022 -- Gold-MiningStocks.com (GMS) is pleased to offer investors an exclusive report regarding the type of environment that market participants are forecasting for the gold industry. Industry experts discuss several economic and financial indicators which should figure highly in a Gold Stock investment strategy. GMS offers investors information on gold stocks, mining stocks, precious metals stocks, mineral exploration/development and provides industry research. GMS also features a growing list of participating public and private companies.

The GMS website does not make recommendations, but offers a unique free information portal to research news, exclusive articles, interviews, investor conferences and a growing list of participating public companies in the Gold sector.

Article Excerpt: Gold-MiningStocks.com Reports – Industry Expert Forecasts For Gold Stock Investment Strategies

By Brian Eriksen Noer, Gold-MiningStocks.com
April 2005

Stock market investors in the gold mining sector should be aware of three areas of focus when planning an investment strategy. The three interconnected financial metrics of: US dollar fluctuations, production costs for mining corporations, and exploratory activity, each affect the market in different ways and the following report outlines the type of environment that market participants are forecasting for this industry.

Investors in the gold sector should take note of the supply and demand dynamic. “The supply dynamic has been challenged due to the lack of investment and exploration when the gold price was low,” said Greg Martin, Director, Investor Relations with Placer Dome (TSX, NYSE: PDG). “It was expected that if the price of gold went over $450/oz then new projects would materialize and the market would be revitalized. The reality however is that the US is a small proportion of global supply, and we have seen reductions from companies based in other countries. Therefore the supply side of the market will remain challenged.”

Conversely, according to recent demand numbers (collated by Goldfields Mineral Services), demand was robust in 2004, up about 6% on a global basis, showing that the fundamental gold market is in a very positive position for continued longer term strength. Investors realize that gold is also a financial instrument, trading off of other financial metrics than merely supply and demand, and due to the state of the US economy, this environment provides a very positive macroeconomic backdrop to the gold market. Placer Dome’s Martin stated that these parameters are currently aligned in terms of being supportive to the gold market.

“Production costs and ore grade are the major considerations for a company in the gold mining industry,” said Marc Cernovitch, V.P. of corporate Development with Halo Resources (HLOSF.OB). “Small scale mines, are very sensitive to the intensive upfront capital requirements. It is most important to engineer an optimum production scenario, which ensures that the operation is mining the highest possible grade of ore. Narrow vein gold mines in general, need to focus on selective small scale mining methods and allowing a mine to produce at its natural rate.”

“We think that the gold price is consolidating at the moment and will continue to track the US dollar,” said Running Fox (TSX-V: RUN) President, Michael Meyers. We believe that the US dollar is going to be on a further decline as the US is looking to pay back debt (originated when the dollar was high) in lower valuated dollars. Gold is still a profitable market to be in.”

Click here to read the full article: http://www.gold-miningstocks.com/Gold_Stocks/Articles/Investment_Strategies.asp

To be added to our current list of Gold Stocks, Mining Stocks, Precious Metals Stocks, Mineral Exploration/Development and Industry Research, contact: e-mail protected from spam bots

About GMS Featured Client: (GMS is compensated by profiled Featured
Running Fox Resource Corp. (TSXV: RUN; OTC.PK: RFXRF) (Corporate Profile, News and Info) Gold Stock - A Vancouver, Canada based resource exploration company which is developing the Brett Project in British Columbia, Canada. Exploration work carried out to date on the Brett Property has confirmed the presence of a number of significant gold bearing mineralized zones, associated with northerly trending altered shear/ fracture zones. Previous work consists of geochemical surveys, trenching, 10,000 meters (32,900 feet) of diamond drilling and 459 meters (1506 feet) of underground development.

For more information contact:
Dawn Van Zant / Trevor Ruehs / Brian Noer
Toll free: 800-665-0411
Email: e-mail protected from spam bots ,
e-mail protected from spam bots , e-mail protected from spam bots

Disclaimer: ECON Investor Relations Inc is the owner of the domain Gold-MiningStocks.com. Our site does not make recommendations, but offers a unique information portal to investors to research news, articles, and recent research. Nothing on our sites should be construed as an offer or solicitation to buy or sell any specific products or securities. All investments involve risk. Although we attempt to research thoroughly, we offer no guarantees as to the accuracy of any information presented. We encourage all investors to use our sites only as a resource to further their own research. The site is compensated by its "Featured Companies, as outlined in our on-line disclaimer at www.InvestorIdeas.com/About/Disclaimer.asp and we rely on the publicly disclosed information of our featured companies for accuracy. The site is currently compensated for by its "featured companies." Compensation Disclosure Specifics: Running Fox Resource Corporation pays Five thousand dollars CDN - per month plus Fifteen thousand options per month to be a featured company and related IR/PR services.

Posted by Industrial-Manufacturing at 04:26 AM | Comments (0)