« Braintech Adds Two U.S. Directors to Board | Main | TechNote Time Introduces Ohm's Law Coin for Electrical and Electronics Tradesmen »
September 06, 2005
Elscint Automation manufactures a Vibratory feeding system for feeding of Engine Valves
Elscint Automation, the ISO 9001:2000 certified leading Vibratory Parts Feeder manufacturer (having CE Marking) from India has recently manufactured a Vibratory feeding system for feeding of Engine Valves
(PRWEB) September 6, 2005 -- Elscint Automation, the ISO 9001:2000 certified leading Vibratory Parts Feeder manufacturer (having CE Marking) from India has recently manufactured a Vibratory feeding system for feeding of Engine Valves having dia from 20 mm to 50 mm and length between 30 mm to 200 mm. There were 50 sizes between these dimensions. A Vibratory Bowl Feeder, namely, Model 630 was used for feeding and orienting the Engine Valves. Thereafter, through a Pneumatic Uptake System, each Engine Valve was transported up to a height of 2 Meters from the Ground Level for further feeding to a Shaft Strengthening Machine. Speed of between 40 to 100 pieces per minute can be achieved depending upon the sizes of the Engine Valves. The system results in a smooth flow of components without any starvation to the Shaft Strengthening Machine. This increased the productivity of the Engine Valve producing unit by 40% as the Shaft Strengthening Machine was the bottleneck in the production process. The biggest advantage of this system is loading of the heavy Engine Valves at a height of just 500 mm, usage of the bare minimum space and flexibility of feeding various sizes of Engine Valves through the same Feeding System. Elscint can even sell only the Vibratory Bowl Feeder or only the Pneumatic Uptake Unit. This Feeding System is available in PLC and non-PLC (Electrical Control) versions. As all Elscint standard parts are used, the delivery times are very less and the cost is very reasonable.
Posted by Industrial-Manufacturing at September 6, 2005 02:14 AM